Download pdf - 2000 S2000 Online Reference Owner's Manual€¦ · 2000 S2000 Online Reference Owner's Manual Use these links (and links throughout this manual) ... but serious accidents can also

2000 S2000 Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com. Contents

Introduction ......................................................................................................................................... i A Few Words About Safety ................................................................................................................. ii

Your Vehicle at a Glance .....................................................................................................................2 Driver and Passenger Safety ..............................................................................................................5 Proper use and care of your vehicle's seat belts, and Supplemental Restraint System. Instruments and Controls ................................................................................................................. 41Instrument panel indicator and gauge, and how to use dashboard and steering column controls. Comfort and Convenience Features ............................................................................................... 85How to operate the climate control system, the audio system, and other convenience features. Before Driving.................................................................................................................................. 115What gasoline to use, how to break-in your new vehicle, and how to load luggage and other cargo. Driving .............................................................................................................................................. 129The proper way to start the engine, shift the transmission, and park, plus towing a trailer. Maintenance ..................................................................................................................................... 143The Maintenance Schedule shows you when you need to take your vehicle to the dealer. Appearance Care.............................................................................................................................. 203Tips on cleaning and protecting your vehicle. Things to look for if your vehicle ever needs body repairs. Taking Care of the Unexpected ...................................................................................................... 211This section covers several problems motorists sometimes experience, and how to handle them. Technical Information..................................................................................................................... 241ID numbers, dimensions, capacities, and technical information. Warranty and Customer Relations (U.S. and Canada) ................................................................ 253A summary of the warranties covering your new Acura, and how to contact us. Authorized Manuals (U.S. only)...................................................................................................... 259How to order manuals and other technical literature. Index...................................................................................................................................................... I

Service Information Summary A summary of information you need when you pull up to the fuel pump.

Owner's Identification Form

Introduction

Congratulations on your selection of the 2000 Honda S2000. We are certainyou will be pleased with your purchase of one of the most sophisticated andtechnologically-advanced sports cars in the world.

One of the best ways to enhance the enjoyment of your new Honda is toread this manual. In it, you will learn how to operate its driving controls andconvenience items. Afterwards, keep this owner's manual in your car so youcan refer to it at any time.

Several warranties protect your new Honda. Read the warranty bookletthoroughly so you understand the coverages and are aware of your rightsand responsibilities.

Maintaining your car according to the schedules given in this manual helpsto keep your driving trouble-free while it preserves your investment. Whenyour car needs maintenance, keep in mind that your Honda dealer's staff isspecially trained in servicing the many systems unique to your Honda. YourHonda dealer is dedicated to your satisfaction and will be pleased to answerany questions and concerns.

As you read this manual, you willfind information that is preceded by

symbol. Thisinformation is intended to help youavoid damage to your S2000, otherproperty, or the environment.

NOTICEa

Main Menu ▲ ▼

A Few Words About Safety

Your safety, and the safety of others,is very important. And operating thiscar safely is an import antresponsibility.

To help you make informeddecisions about safety, we haveprovided operating procedures andother information on labels and inthis manual. This information alertsyou to potential hazards that couldhurt you or others.

Of course, it is not practical orpossible to warn you about all thehazards associated with operating ormaintaining your car. You must useyour own good judgement.

You will find this important safety information in a variety of forms,including:

Safety Labels — on the car.Safety Messages — preceded by a safety alert symbol and one of

three signal words: DANGER, WARNING, or CAUTION.These signal words mean:

You WILL be KILLED or SERIOUSLYHURT if you don't follow instructions.

You CAN be KILLED or SERIOUSLYHURT if you don't follow instructions.

You CAN be HURT if you don't followinstructions.

Safety Headings — such as Important Safety Reminders or ImportantSafety Precautions.

Safety Section — such as Driver and Passenger Safety.Instructions — how to use this car correctly and safely.

This entire book is filled with important safety information - please read itcarefully.

Main Menu ▲ ▼

Your Car at a Glance

HEADLIGHTS/TURN SIGNAL SWITCH(P.51)

WINDSHIELD WIPER CONTROLS(P.53)

HEATING AND AIR CONDITIONING(P.86)

HOOD RELEASEHANDLE(P.118)

AUDIO SYSTEM(P.94)

DOOR LOCKSWITCH(P.62)

POWER WINDOWSWITCHES(P.69)

MIRRORCONTROLS(P.79)

ROOF SWITCH(P.71)

HAZARD WARNING SWITCH(P.79)

Main Menu ▲ ▼

Your Car at a Glance

REMOTE AUDIO CONTROLS(P.112)

INSTRUMENT PANEL BRIGHTNESS(P.52)

ENGINE START BUTTON(P.131)

HEADLIGHTS/TURNSIGNALS(P.51)

HOOD RELEASE HANDLE(P.118)

CRUISE CONTROL MASTER SWITCH(P.55)

HORN

WINDSHIELD WIPERS/WASHERS(P.53)

Main Menu ▲ ▼

Driver and Passenger Safety

This section gives you importantinformation about how to protectyourself and your passenger. Itshows you how to use seat beltsproperly. It explains your Supple-mental Restraint System. And it tellsyou how to properly restrain childrenin your car.

Important Safety Precautions .......... 6Your Car's Safety Features.............. 7

Seat Belts........................................ 8Airbags............................................ 9Seats & Seat-Backs...................... 10Head Restraints........................... 10Door Locks................................... 10Pre-Drive Safety Checklist......... 11

Protecting Adults............................. 121. Close and Lock the Doors...... 122. Adjust the Front Seats............ 123. Adjust the Seat-Backs............. 134. Fasten and Position the Seat

Belts...................................... 155. Maintain a Proper Sitting

Position................................. 16Advice for Pregnant Women...... 17Additional Safety Precautions.... 18

Protecting Children......................... 19All Children Must Be

Restrained................................ 19Your Car is Not Recommended

for Child Passengers............... 20The Passenger's Airbag Poses

Serious Risks to Children....... 20Additional Safety Precaution...... 22

General Guidelines for UsingChild Seats................................ 22

Protecting Small Children.......... 26Protecting Larger Children........ 29

Additional Information About YourSeat Belts.................................. 33

Seat Belt System Components... 33Lap/Shoulder Belt....................... 33Seat Belt Maintenance................ 34

Additional Information About YourSRS............................................ 35

SRS Components......................... 35How Your Airbags Work............ 35How the Automatic Seat Belt

Tensioners Work..................... 37How the SRS Indicator Light

Works........................................ 37SRS Service................................... 38Additional Safety Precautions.... 38

Carbon Monoxide Hazard.............. 39Safety Labels.................................... 40


Main Menu ▲ ▼

Important Safety Precautions

You'll find many safetyrecommendations throughout thissection, and throughout this manual.The recommendations on this pageare the ones we consider to be themost important.

Always Wear Your Seat BeltA seat belt is your best protection inall types of collisions. Airbagssupplement seat belts, but airbagsare designed to inflate only in amoderate to severe frontal collision.So even though your car is equippedwith airbags, make sure you andyour passenger always wear yourseat belts, and wear them properly.(See page 15).

Your Car is Not Recommendedfor Child PassengersSince all children are safest in theback seat of a car, and your car doesnot have a back seat, we recommendthat you do not carry a childpassenger. Due to the passenger's

airbag hazard, you should nevercarry an infant in a rear-facing childseat in this car. If a small child whomust be restrained in a forward-facing child seat, or a larger child,must ride in this car, be sure tofollow all instructions and safetywarnings in this manual. (See pages26 and 29.)

Be Aware of Airbag HazardsWhile airbags can save lives, theycan cause serious or fatal injuries tooccupants who sit too close to them,or are not properly restrained.Infants, young children, and shortadults are at the greatest risk. Besure to follow all instructions andwarnings in this manual. (See page

7 .)

Don't Drink and DriveAlcohol and driving don't mix. Evenone drink can reduce your ability torespond to changing conditions, andyour reaction time gets worse with

every additional drink. So don't drinkand drive, and don't let your friendsdrink and drive, either.

Control Your SpeedExcessive speed is a major factor incrash injuries and deaths. Generally,the higher the speed the greater therisk, but serious accidents can alsooccur at lower speeds. Never drivefaster than is safe for currentconditions, regardless of themaximum speed posted.

Keep Your Car in Safe ConditionHaving a tire blowout or amechanical failure can be extremelyhazardous. To reduce the possibilityof such problems, check your tirepressures and condition frequently,and perform all regularly scheduledmaintenance. (See page 146.)


Main Menu Table of Contents ▲ ▼

Your Car's Safety Features

(1) Safety Cage(2) Crush Zones(3) Seats & Seat-Backs(4) Head Restraints(5) Collapsible Steering Column(6) Seat Belts(7) Seat Belt Tensioners(8) Airbags(9) Door Locks

Your car is equipped with manyfeatures that work together toprotect you and your passengerduring a crash.

Some safety features do not requireany action on your part. Theseinclude a strong steel frameworkthat forms a safety cage around thepassenger compartment; front andrear crush zones that are designed tocrumple and absorb energy during acrash; a collapsible steering column;and seat belt tensioners thatautomatically tighten the seat beltsin the event of a crash.These safety features are designedto reduce the severity of injuries in acrash. However, you and yourpassenger can't take full advantageof these safety features unless youremain sitting in a proper positionand always wear your seat beltsproperly. In fact, some safetyfeatures can contribute to injuries ifthey are not used properly.




Seat BeltsFor your safety, and the safety ofyour passenger, your car is equippedwith seat belts in both seatingpositions.

Your seat belt system alsoincludes a light on the

instrument panel to remind you andyour passenger to fasten your seatbelts.

Why Wear Seat BeltsSeat belts have proven to be thesingle most effective safety device.

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your car has airbags.

In addition, most states and allCanadian provinces require you towear seat belts.

When properly worn, seat belts:

Keep you connected to the vehicleso you can take advantage of thevehicle's built-in safety features.

Help protect you in almost everytype of crash, including side andrear impacts and rollovers. (Yourairbag can only be helpful in a

moderate to severe frontalcollision.)

Help keep you from being thrownagainst the inside of the vehicleand against other occupants.

Keep you from being thrown outof the vehicle.

Help keep you in a good positionshould the airbags ever deploy. Agood position reduces the risk ofinjury from an inflating airbag, andallows you to get the bestadvantage from the airbag.

Of course, seat belts cannotcompletely protect you in everycrash. But in most cases, seat beltscan reduce your risk of seriousinjury.

What you should do: Always wearyour seat belt, and make sure youwear it properly.


Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, evenif you have airbags.

Be sure you and yourpassenger always wear seatbelts and wear them properly.



Airbags

Your car has a SupplementalRestraint System (SRS) with frontalairbags to help protect the driver anda passenger.

This system also includesan indicator light on the

instrument panel to alert you to apossible problem with the system.

The most important things you needto know about your airbags are:

Airbags do not replace seat belts.The seat belts are the occupants'primary protection in all types ofcollisions. Airbags supplementseat belts by providing extraprotection for occupants' headsand chests.

Airbags offer no protection in sideimpacts, rear impacts, rollovers,or minor collisions. Airbags aredesigned to deploy only during amoderate to severe frontalcollision.

Airbags can pose serious hazards.To do their job, airbags mustinflate with tremendous force andspeed. So while airbags save lives,they can cause serious injuries toadults and larger children who arenot wearing seat belts, are notwearing them properly, are sillingtoo close to the airbag, or are notsitting in a proper position. Infantsand small children are at an evengreater risk of injury or death.

What you should do: Always wearyour seat belt properly, and situpright and as far back as possiblefrom the steering wheel ordashboard.


SRS



Seats & Seat-BacksYour car's seats are designed to keepyou in a comfortable, uprightposition so you can take fulladvantage of the protection offeredby seat belts and the energyabsorbing materials in the seats.

How you adjust your seats and seat-backs can also affect your safety. Forexample, sitting too close to thesteering wheel or dashboardincreases the risk of you or yourpassenger being injured by strikingthe inside of the car, or by aninflating airbag.

Reclining a seat-back too far reducesthe seat belt's effectiveness andincreases the chance that the seat'soccupant will slide under the seatbelt in a crash and be seriouslyinjured.

What you should do: Move the seatsas far back as possible, and keepadjustable seat-backs in an uprightposition whenever the car is moving.

Head RestraintsHead restraints can help protect youfrom whiplash and other injuries.

Door LocksKeeping your doors locked reducesthe chance of being thrown out ofthe car during a crash. It also helpsprevent occupants from accidentallyopening a door and falling out, andoutsiders from unexpectedly openingyour doors.




Pre-Drive Safety ChecklistTo make sure you and yourpassenger gel the maximumprotection from your car's safetyfeatures, check the following eachtime before you drive away:

You and any adult passenger, or alarger child who has outgrownchild seats, are wearing your seatbelts and wearing them properly(see page 15).

A small child riding in a forward-facing child seat is properlyrestrained (see page 26).

Occupants are sitting upright andas far back as possible from thesteering wheel and dashboard(see page 12).

Seat-backs are upright (see page13).

Both doors are closed and locked(seepage 12).

All cargo is properly stored orsecured (see page 124).

The rest of this section gives moredetailed information about how youcan maximize your safety.

Remember, however, that no safetysystem can prevent all injuries ordeaths that can occur in severecrashes, even when seat belts areproperly worn and the airbags deploy.



Protecting Adults

IntroductionThe following pages provideinstructions on how to properlyprotect adult occupants.

These instructions also apply to achild whom you have decided islarge enough and mature enough toride as a passenger. (See page 29 forimportant additional guidelines onhow to properly protect largerchildren.)

1.Close and Lock the DoorsAfter everyone has entered the car,be sure the doors are closed andlocked.

Your car has a doormonitor light on the

instrument panel to indicate when aspecific door is not tightly closed.

For safety, locking the doors reducesthe chance that a passenger,especially a child, will open a doorwhile the car is moving andaccidentally fall out. It also reducesthe chance of someone being thrownout of the car during a crash.

For security, locked doors canprevent an outsider fromunexpectedly opening a door whenyou come to a stop.See page 58 for how to lock thedoors.

2.Adjust the Front Seats

Any driver who sits too close to thesteering wheel is at risk of beingseriously injured or killed by strikingthe steering wheel, or from beingstruck by an inflating airbag during acrash.



Protecting Adults

To reduce the chance of injury, wearyour seat belt properly, sit uprightwith your back against the seat, andmove the seat as far back as possiblefrom the steering wheel while stillmaintaining full control of the car.Also make sure your passengermoves the seat as far to the rear aspossible.

Most shorter drivers can get farenough away from the steeringwheel and still reach the pedals.However, if you are concerned aboutsitting too close, we recommend thatyou investigate whether some typeof adaptive equipment may help.

Once your seat is adjusted correctly,rock it back and forth to make surethe seat is locked in position.

See page 68 for how to adjust theseats.

3.Adjust the Seat-BacksAdjust the driver's seat-back to acomfortable, upright position,leaving ample space between yourchest and the airbag cover in thecenter of the steering wheel. If yousit too close to the steering wheel,you could be injured if the airbaginflates.

A passenger should also adjust theseat-back to an upright position, butas far from the dashboard aspossible. A passenger who sits tooclose to the dashboard could beinjured if the airbag inflates.

CONTINUED


Sitting too close to an airbagcan result in serious injury ordeath if the airbags inflate.

Always sit as far back from theairbags as possible.


Protecting Adults

Reclining a seat-back so that theshoulder part of the belt no longerrests against the occupant's chestreduces the protective capability ofthe belt. It also increases the chanceof sliding under the belt in a crashand being seriously injured. Thefarther a seat-back is reclined, thegreater the risk of injury.

See page 68 for how to adjust seat-backs.


Reclining the seat-back too farcan result in serious injury ordeath in a crash.

Adjust the seat-back to anupright position and sit wellback in the seat.


Protecting Adults

4.Fasten and Position the SeatBelts

Insert the latch plate into the buckle,then tug on the belt to make sure thebelt is securely latched. Also checkthat the belt is not twisted, because atwisted belt can cause seriousinjuries in a crash.

Position the lap part of the belt aslow as possible across your hips,then pull up on the shoulder part ofthe belt so the lap part fits snugly.This lets your strong pelvic bonestake the force of a crash and reducesthe chance of internal injuries.

If necessary, pull up on the belt againto remove any slack from theshoulder part, then check that thebelt rests across the center of yourchest and over your shoulder. This

spreads the forces of a crash overthe strongest bones in your upperbody.

Never place the shoulder portion of alap/shoulder belt under your arm orbehind your back. This could causevery serious injuries in a crash.

CONTINUED


Improperly positioning the seatbelts can cause serious injuryor death in a crash.

Make sure all seat belts areproperly positioned beforedriving.


Protecting Adults

If a seat belt does not seem to workas it should, it may not protect theoccupant in a crash. No one shouldsit in a seat with an inoperative seatbelt. Anyone using a seat belt that isnot working properly can beseriously injured or killed. Have yourHonda dealer check the belt as soonas possible.

See page 33 for additionalinformation about your seat beltsystem and how to take care of yourbelts.

5.Maintain a Proper SittingPosition

After occupants have adjusted theirseats and put on seat belts, it is veryimportant that they continue to situpright, well back in their seats, withtheir feet on the floor, until the car isparked and the engine is off.

Sitting improperly can increase thechance of injury during a crash. Forexample, if an occupant slouches,lies down, turns sideways, sitsforward, leans forward or sideways,or puts one or both feet up, thechance of injury during a crash isgreatly increased.

In addition, an occupant who is out ofposition can be seriously or fatallyinjured by striking interior parts ofthe car, or by being struck by aninflating airbag.

Remember, to get the bestprotection from your car's airbagsand other safety features, you mustsit properly and wear your seat beltproperly.


Sitting improperly or out ofposition can result in seriousinjury or death in a crash.

Always sit upright, well back inthe seat, with your feet on thefloor.


Protecting Adults

Advice for Pregnant Women Because protecting the mother is thebest way to protect her unborn child,a pregnant woman should alwayswear a seat belt whenever she drivesor rides in a vehicle.

Remember to keep the lap portion ofthe belt as low as possible acrossyour hips.

Pregnant women should also situpright and as far back as possiblefrom the steering wheel ordashboard. This will reduce the riskof injuries to both the mother andher unborn child that can be causedby a crash or an inflating airbag.

Each time you have a check-up, askyour doctor if it's okay for you todrive.



Protecting Adults

Additional Safety PrecautionsTwo people should never use thesame seat belt. If they do, theycould be very seriously injured in acrash.

Do not put any accessories on seatbelts. Devices intended to improveoccupant comfort or reposition theshoulder part of a seat belt canseverely compromise theprotective capability of the seatbelt and increase the chance ofserious injury in a crash.

Do not place hard or sharp objectsbetween yourself and an airbag.Carrying hard or sharp objects onyour lap, or driving with a pipe orother sharp object in your mouth,can result in injuries if yourairbags inflate.

Keep your hands and arms awayfrom the airbag covers. If yourhands or arms are close to the SRScovers in the center of thesteering wheel and on top of thedashboard, they could be injured ifthe airbags inflate.

Do not attach or place objects onthe airbag covers. Any objectattached to or placed on thecovers marked "SRS AIRBAG,"in the center of the steeringwheel and on top of thedashboard, could interfere withthe proper operation of theairbags. Or, if the airbags inflate,the objects could be propelledinside the car and hurt someone.



Protecting Children

Children depend on adults to protectthem. However, despite their bestintentions, many parents and otheradults may not know how to properlyprotect young passengers.

So if you have children, or if you everneed to drive with a grandchild orother children in your car, be sure toread this section.

All Children Must Be RestrainedEach year, many children are injuredor killed in vehicle crashes becausethey are either unrestrained or notproperly restrained. In fact, vehicleaccidents are the number one causeof death of children ages 12 andunder.

To reduce the number of childdeaths and injuries, every state andCanadian province requires thatinfants and children be restrainedwhenever they ride in a vehicle.

Any child who is too small to wear aseat belt should be properlyrestrained in a child seat. (See page26.)

A larger child should always berestrained with a seat belt. (See page29.)


Children who are unrestrainedor improperly restrained can beseriously injured or killed in acrash.

Any child too small for a seatbelt should be properlyrestrained in a child seat. Alarger child should be properlyrestrained with a seat belt.


Protecting Children

Your Car is Not Recommendedfor Child PassengersWe strongly recommend that you donot carry any child in this car.One reason is that your car does nothave a back seat, and accidentstatistics show that a child of anysize or age is safer when they areproperly restrained in the back seatof a vehicle.

In addition, your car has a passenger'sairbag which poses serious risks tochildren —particularly infants andsmall children.

The Passenger's Airbag PosesSerious Risks to ChildrenAirbags have been designed to helpprotect adults in a moderate tosevere frontal collision. To do this,the passenger's airbag is quite large,and it inflates with tremendousspeed.As a result, we urge you to followthese guidelines.

InfantsNever put a rear-facing child seat inthe front seat of a car equipped witha passenger's airbag. If the airbaginflates, it can hit the back of thechild seat with enough force to kill orvery seriously injure an infant.

Small ChildrenPlacing a forward-facing child seat inthe front seat of a car equipped witha passenger's airbag can behazardous. If the vehicle seat is toofar forward, or the child's head isthrown forward during a collision, aninflating airbag can strike the childwith enough force to kill or veryseriously injure a small child. If asmall child must ride in this car,follow the instructions on page 23 .

Larger ChildrenChildren who have outgrown childseats are also at risk of being injuredor killed by an inflating passenger'sairbag. If a larger child must ride inthis car, see page 29 for importantguidelines on how to decide whethera child is large enough and matureenough to ride as a passenger, andhow to properly protect the child.



Protecting Children

U.S. ModelsTo remind you of the passenger'sairbag hazards, your car has warninglabels on the dashboard and on thedriver's and passenger's visors.Please read and follow theinstructions on these labels.

Canadian ModelsTo remind you of the airbag hazards,your car has warning labels on thedriver's and passenger's visors.Please read and follow theinstructions on these labels.


CAUTIONTO AVOID SERIOUS INJURY:FOR MAXIMUM SAFETY PROTECTION INALL TYPES OF CRASHES, YOU MUSTALWAYS WEAR YOUR SAFETY BELT.DO NOT INSTALL REARWARD-FACINGCHILD SEATS IN ANY FRONTPASSENGER SEAT POSITION.DO NOT SIT OR LEAN UNNECESSARILYCLOSE TO THE AIR BAG.DO NOT PLACE ANY OBJECTS OVER THEAIR BAG OR BETWEEN THE AIR BAGAND YOURSELF.SEE THE OWNER'S MANUAL FOR FURTHERINFORMATION AND EXPLANATIONS.

PRECAUTIONS:POUR EVITER DES BLESSURES GRAVES:POUR PROF1TER D'UNE PROTECTIOONMAXIMALE LORS D'UNE COLLISION BQUCLEZTOUJOURS VOTRE C EINTURE DE SECURITE.NINSTALLEZ JAMAIS UN SIEGE POURENFANTS FAISANT FACE A L'ARRIERE SURLE SIEGE DU PASSAGER AVANT.NE VOUS APPUYEZ PAS ET NE VOUS ASSOYEZPAS PRES DU COUSSIN GONFLABLE.NE DEPOSEZ AUCUN OBJET SUR LE COUSSINGONFLABLE OU ENTRE LE COUSSINGONFLABLE ET VOUS.LISEZ LE GUIDE UTILISATEUR POUR DEPLUS AMPLES RENSEIGNEMENTS.


Protecting Children

Additional Safety PrecautionDo not leave a child alone in yourcar. Leaving a child without adultsupervision is illegal in most statesand Canadian provinces and canbe very hazardous. For example, asmall child left in a car on a hotday can die from heatstroke. Achild left alone with the key in theignition can accidentally set thecar in motion, possibly injuringthemselves or others.

General Guidelines for UsingChild SeatsAs discussed on page 20, becauseyour car does not have a back seat,and because of the passenger'sairbag hazard, we stronglyrecommend that you do not carry asmall child as a passenger in this car.

However, if you must carry a smallchild in this car, the child must beproperly restrained in a child seat.

The following pages give generalguidelines for selecting and installinga child seat. See page 26 foradditional information.

Selecting a Child SeatTo provide proper protection, a childseat should meet threerequirements:

1. The child seat should meet safetystandards. The child seat shouldmeet Federal Motor VehicleSafety Standard 213 (FMVSS 213)or Canadian Motor Vehicle SafetyStandard 213 (CMVSS 213). Lookfor the manufacturer's statementof compliance on the box and seat.



Protecting Children

2. The child seat should be of theproper type and size to fit the child.

Small Children: A child who can situp without support should berestrained in a forward-facing childseat. See page 26 for additionalinformation on protecting smallchildren.

3. The child seat should fit thepassenger's seat.

Due to variations in the design ofchild seats, vehicle seats, and seatbelts, all child seats will not fit allseating positions in all cars.

However, Honda is confident thatone or more child seat models can fitand be properly installed in allrecommended seating positions inyour car.

Before purchasing a child seat, werecommend that parents test thechild seat to make sure it fitsproperly in the passenger's seat. If apreviously purchased child seat doesnot fit, you will need to buy adifferent one that will fit.

CONTINUED



Protecting Children

Placing a Child SeatThis page briefly summarizesHonda's recommendations on whereto place a child seat in your car.

Passenger's SeatInfants: Never in the passenger's

seat, due to the passenger's airbaghazard.

Small children: Not recommended,due to the passenger's airbaghazard. If a small child must ridein this car, move the vehicle seatto the rear-most position andsecure a front-facing child seatwith the seat belt, (see page 27 ).

This car is not equipped with atether attachment point.


Airbags Pose SeriousRisks to Children

The passenger's airbag inflateswith enough force to kill orseriously injure an infant in arear-facing child seat.

A small child in a forward-facingchild seat is also at risk. If thevehicle seat is too far forward,or the child's head is thrownforward during a collision, aninflating airbag can kill orseriously injure the child.

If a small child must ride in thiscar, follow the instructionsprovided in this section.


Protecting Children

Installing a Child SeatAfter selecting a proper child seat,there are three main steps ininstalling the seat:

1. Secure the child seat to the carwith a seat belt. Al l child seatsmust be secured to the car withthe lap part of a lap/shoulder belt.A child whose seat is not properlysecured to the car can beendangered in a crash. See page27 for instructions on how tosecure a forward-facing child seatin this car.

2. Make sure the child seat is firmlysecured. After installing a childseat, push and pull the seatforward and from side to side toverify that it is secure.

To provide security during normaldriving maneuvers as well as duringa collision, we recommend thatparents secure a child seat as firmlyas possible.

However, a child seat does not needto be "rock solid." It may be difficultto install a child seat so that it doesnot move at all. Some side-to-side orback-and-forth movement can beexpected and should not reduce thechild seat's effectiveness.

3. Secure the child in the child seat.Make sure the child is properlystrapped in the child seataccording to the child seat maker'sinstructions. A child who is notproperly secured in a child seatcan be thrown out of the seat in acrash and seriously injured.

Storing a Child SeatWhen you are not using a child seat,either remove it and store it in a safeplace, or make sure it is properlysecured. An unsecured child seat canbe thrown around the car during acrash or sudden stop and injuresomeone.



Protecting Children

Protecting Small Children

The passenger's airbag posesserious risks to small children. If thevehicle seat is too far forward, or thechild's head is thrown forwardduring a collision, or the child isunrestrained or improperlyrestrained, an inflating airbag can killor seriously injure the child.

For these reasons, we recommendthat you do not carry a small child asa passenger.

If you decide to carry a small child inthis car, follow the instructions andguidelines below.

Child Seat TypeA child who can sit up withoutsupport, and who fits within the childseat maker's weight and heightlimits, should be restrained in aforward-facing, upright child seat.

Of the different seats available, werecommend those that have a five-point harness system as shown.

We also recommend that a smallchild stay in the child seat as long aspossible, until the child reaches theweight or height limit for the seat.


Improperly placing a forward-facing child seat in the frontseat can result in serious injuryor death if the airbags inflate.

If you must place a forward-facing child seat in front, movethe vehicle seat as far back aspossible and properly restrainthe child.


Protecting Children

Child Seat InstallationThe passenger's seat belt has alocking mechanism that must beactivated to secure a child seat.

The following pages provideinstructions and tips on how tosecure a forward-facing child seatwith this type of seat belt.

1. Move the vehicle seat to the rear-most position. Moving the seat asfar back as possible reduces thechance of a child being injured orkilled if the passenger's airbaginflates. (See page 68 forinstructions on how to adjust theseat.)

2. With the child seat in position,route the belt through the childseat according to the seat maker'sinstructions, then insert the latchplate into the buckle.

3. To activate the lockable retractor,slowly pull the shoulder part of thebelt all the way out until it stops,then let the belt feed back into theretractor (you might hear aclicking noise as the belt retracts).

4. After the belt has retracted, tug onit. If the belt is locked, you will notbe able to pull it out. If you can pullthe belt out, it is not locked andyou will need to repeat these steps.


CONTINUED


Protecting Children

5. After confirming that the belt islocked, grab the shoulder part ofthe belt near the buckle and pullup to remove any slack from thelap part of the belt. Remember, ifthe lap part of the belt is not tight,the child seat will not be secure. Itmay help to put weight on thechild seat, or push on the back ofthe seat, while pulling up on thebelt.

6. Push and pull the child seatforward and from side to side toverify that it is secure enough tostay upright during normal drivingmaneuvers. If the child seat is notsecure, unlatch the belt, allow it toretract fully, then repeat thesesteps.

To deactivate the lockingmechanism in order to remove achild seat, unlatch the buckle,unroute the seat belt, and let the beltfully retract.

Additional Precautions for SmallChildren

Never hold a small child on yourlap. If you are not wearing a seatbelt in a crash, you could bethrown forward into thedashboard and crush the child.

If you are wearing a seat belt, thechild can be torn from your armsduring a crash. For example, ifyour car crashes into a parkedvehicle at 30 mph (48 km/h), a30-lb (14 kg) child will become a900-lb (410 kg) force, and you willnot be able to hold on.

Never put a seat belt over yourselfand a child. During a crash, thebelt could press deep into the childand cause very serious injuries.



Protecting Children

Protecting Larger ChildrenThe passenger's airbag posesserious risks to children, includingthose who have outgrown child seats.If the vehicle seat is too far forward,or the child's head is thrown forwardduring a collision, or the child isunrestrained or out of position, aninflating airbag can kill or seriouslyinjure the child.

For these reasons, we recommendthat you do not carry a childpassenger.

With this in mind, following aresome guidelines to help you decidewhen a given child may ride in yourcar.

The Child Should Wear a Seat BeltWhen a child reaches therecommended weight or height limitfor a forward-facing child seat, thechild should wear a lap/shoulder belt.

If a child is too short for the shoulderpart of the belt to properly fit, werecommend that the child use abooster seat until tall enough to usethe seat belt without a booster.

The following pages giveinstructions on how to check properseat belt fit, what kind of boosterseat to use if one is needed, andimportant precautions for a childwho must ride in this car.

Checking Seat Belt Fit

To determine if a lap/shoulder beltproperly fits a child, have the childput on the seat belt. Follow theinstructions on page 15. Then checkhow the belt fits.

If the shoulder part of the belt restsover the child's collarbone andagainst the center of the chest, asshown, the child is large enough towear the seat belt.


CONTINUED

Allowing a larger child to sitimproperly in the front seat canresult in injury or death if theairbags inflate.

If a larger child must sit in front,make sure the child moves theseat as far back as possibleand wears the seat belt properly.


Protecting Children

However, if the belt touches orcrosses the child's neck, the childneeds to use a booster seat.

Do not let a child wear a seat beltacross the neck. This could result inserious neck injuries during a crash.

Do not let a child put the shoulderpart of a seat belt behind the back orunder the arm. This could causevery serious injuries during a crash.It also increases the chance that thechild will slide under the belt in acrash and be injured.

Do not put any accessories on a seatbelt. Devices intended to improveoccupant comfort or reposition theshoulder part of a seat belt, severelycompromise the protective capabilityof the seat belt and increase thechance of serious injury in a crash.

Two children should never use thesame seat belt. If they do, they couldbe very seriously injured in a crash.

Using a Booster Seat

If a child needs a booster seat, werecommend choosing a style thatallows the child to use the lap/shoulder belt directly, without ashield, as shown.

Whichever style you select, followthe booster seat maker's instructions.



Protecting Children

A child may continue using a boosterseat until the tops of the ears areeven with the top of the seat-back. Achild of this height should be tallenough to use the lap/shoulder beltwithout a booster.

When Can a Larger Child Ride in thisCarChildren vary widely. And while agemay be one indicator of when a childcan safely ride in this car, there areother important factors you shouldconsider.

Physical SizePhysically, a child must be largeenough for the lap/shoulder belt toproperly fit over the hips, chest, andshoulder (see pages 15 and 29). Ifthe seat belt does not fit properly,the child should use a booster seat.

MaturityTo safely ride in this car, a childmust be able to follow the rules,including sitting properly andwearing the seat belt properlythroughout a ride.


CONTINUED


Protecting Children

If you decide that a child can safelyride in this car, be sure to:

Carefully read the owner's manualand make sure you understand allseat belt instructions and all safetyinformation.

Move the vehicle seat to the rear-most position.

Have the child sit up straight, backagainst the seat, and feet on ornear the floor.

Check that the child's seat belt isproperly positioned and secured.

Supervise the child. Even a maturechild sometimes needs to bereminded to fasten the seat belt orsit properly.



Additional Information About Your Seat Belts

Seat Belt System ComponentsYour seat belt system includes lap/shoulder belts in both seatingpositions.The seat belts are also equipped withautomatic seat belt tensioners.

The system also includes alight on the instrument

panel to remind you and yourpassenger to fasten your belts. If thedriver's seat belt is not fastenedbefore the ignition is turned ON (II),the light will come on and a beeperwill also sound. The beeper will stopafter a few seconds, but the light willstay on until the driver's seat belt isfastened.

Lap/Shoulder Belt

This seat belt has a single belt thatgoes over your shoulder, across yourchest and across your hips.To fasten the belt, insert the latchplate into the buckle, then tug on thebelt to make sure the buckle islatched.To unlock the belt, push the redPRESS button on the buckle. Guidethe belt across your body to the doorpillar. After exiting the car, be surethe belt is out of the way and will not

get closed in the door.

Both seat belts have an emergencylocking retractor.In normal driving, the retractor letsyou move freely in your seat while itkeeps some tension on the belt.During a collision or sudden stop,the retractor automatically locks thebelt to help restrain your body.

The passenger's seat belt has anadditional locking mechanism thatmust be activated to secure a childseat. (See page 27 for instructions onhow to secure a forward-facing childseat with this type of belt.)

If the shoulder part of the belt ispulled all the way out, the lockingmechanism will activate. The beltwill retract, but it will not allow thepassenger to move freely.

CONTINUED



Additional Information About Your Seat Belts

To deactivate the lockingmechanism, unlatch the buckle andlet the seat belt fully retract. Torefasten the belt, pull it out only asfar as needed.

See page 15 for instructions on howto wear the lap/shoulder beltproperly.

Seat Belt MaintenanceFor safety, you should check thecondition of your seat belts regularly.

Pull each belt out fully and look forfrays, cuts, burns, and wear. Checkthat the latches work smoothly andthat the lap/shoulder belts retracteasily. Any belt not in good conditionor not working properly will notprovide good protection and shouldbe replaced as soon as possible.

U.S. ModelsHonda provides a lifetime warrantyon seat belts. Honda will repair orreplace any seat belt component thatfails to function properly duringnormal use. Please see your HondaWarranty Information booklet fordetails.

If a seat belt is worn during a crash,you should have your dealer inspectthe belt, and replace it if necessary.A belt that has been worn during acrash may not provide the same levelof protection in a subsequent crash.The dealer should also inspect theanchors for damage and replacethem if needed.

For information on how to clean yourseat belts, see page 207 .


Not checking or maintainingseat belts can result in seriousinjury or death if the seat beltsdo not work properly whenneeded.

Check your seat belts regularlyand have any problemcorrected as soon as possible.


Additional Information About Your SRS

SRS ComponentsYour Supplemental Restraint System(SRS) includes:

Two front airbags. The driver'sairbag is stored in the center ofthe steering wheel; the frontpassenger's airbag is stored in thedashboard. Both are marked "SRSAIRBAG."

Automatic seat belt tensionersthat tighten the front seat beltsduring a moderate to severefrontal collision.

Sensors that can detect amoderate to severe frontalcollision.

A sophisticated electronic systemthat continually monitors thesensors, control unit, the airbagactivators, and all related wiringwhen the ignition is ON (II).

An indicator light on theinstrument panel that alerts you toa possible problem with thesystem (see page 37 ).

Emergency backup power in caseyour car's electrical system isdisconnected in a crash.

How Your Airbags Work

If you ever have a moderate tosevere frontal collision, the sensorswill detect rapid deceleration andsignal the control unit to instantlyinflate the airbags and activate theautomatic seat belt tensioners.


CONTINUED



During a crash, your seat belt helpsrestrain your lower body and torso,while the tensioner tightens andlocks the seat belt to help keep youin place. Your airbag provides acushion to help restrain and protectyour head and chest.

Since both airbags use the samesensors, both airbags normallyinflate at the same time. However, itis possible for only one airbag toinflate.

This can occur when the severity ofa collision is at the margin, orthreshold, that determines whetheror not the airbags will deploy. Insuch cases, the seat belt will providesufficient protection, and thesupplemental protection offered bythe airbag would be minimal.

After inflating, the airbagsimmediately deflate, so they won'tinterfere with the driver's visibility,or the ability to steer or operateother controls.

The total time for inflation anddeflation is approximately one-tenthof a second, so fast that mostoccupants are not aware that theairbags deployed until they see themlying in their laps.

After a crash, you may see whatlooks like smoke. This is actuallypowder from the airbag's surface.Although the powder is not harmful,people with respiratory problemsmay experience some temporarydiscomfort. If this occurs, get out ofthe car as soon as it is safe to do so.

U.S. OwnersFor additional information on howyour airbags work, see the booklettitled SRS: What You Need to KnowAbout Airbags that came with yourowner's manual.

Canadian OwnersFor additional information on howyour airbags work, ask your dealerfor a copy of the booklet titled SRS:What You Need to Know About Airbags.




Your Honda has automatic seat belttensioners for added protectionduring a moderate to severe frontalcollision.

If your airbags inflate, the tensionersimmediately tighten the front seatbelts to help hold the occupants inplace. The belts will remain tightuntil you unbuckle them in thenormal way.

How the Automatic Seat BeltTensioners Work

How the SRS Indicator LightWorks

The purpose of the SRSlight is to alert you to a

potential problem with yourSupplemental Restraint System.

When you turn the ignition ON (II),this indicator will light up brieflythen go out. This tells you that thesystem is working properly.

However, if the light comes on at anyother time, you should have thesystem checked by your dealer. Forexample:

If the SRS indicator light does notcome on after you turn the ignitionON (II).

If the light stays on after theengine starts.

SRS

If the light comes on or flashes onand off while you drive.

If you see any of these indications,your airbags and seat belt tensionersmay not deploy when you need them.See your Acura dealer as soon aspossible.

Ignoring the SRS indicator lightcan result in serious injury ordeath if the airbags do notinflate when needed.

Have your vehicle checked by adealer as soon as possible ifthe SRS light alerts you to apotential problem.

Draiver and Passenger Safety



SRS ServiceYour Supplemental Restraint Systemis virtually maintenance-free, andthere are no parts you can safelyservice. However, yon must haveyour car serviced if:

Your airbags ever inflate. Theairbags, seat belt tensioners, andcontrol unit must be replaced. Donot try to remove or replace theairbags yourself.This must be clone by a Hondadealer or a knowledgeable bodyshop.

The SRS indicator light alerts youto a problem. Take your car to anauthorized Honda dealer as soonas possible. If you ignore thisindication, the airbags might notinflate when you need them (seepage 45) .

Additional Safety PrecautionsDo not attempt to deactivate yourairbags. Together, airbags andseat belts provide the bestprotection in a moderate to severefrontal collision.

Do not tamper with SRScomponents or wiring for anyreason. Tampering could causethe airbags to deploy, possiblycausing very serious injury.

See page 123 for further informationand precautions relating to your SRS.



Carbon Monoxide Hazard

Your car's exhaust contains carbonmonoxide gas. You should have noproblem with carbon monoxideentering the car in normal driving ifyou maintain your car properly.Have the exhaust system inspectedfor leaks whenever:

The car is raised for an oil change.You notice a change in the soundof the exhaust.The car was in an accident thatmay have damaged the underside. High levels of carbon monoxide can

collect rapidly in enclosed areas,such as a garage. Do not run theengine with the garage door closed.Even with the door open, run theengine only long enough to move thecar out of the garage.

With the trunk lid open, air flow canpull exhaust gas into your vehicle'sinterior and create a hazardouscondition. If you must drive with thetrunk lid open, open all the windowsand set the heating and coolingsystem as shown below.

If you must sit in your parked car,even in an unconfined area, with theengine running, adjust the heatingand cooling system as follows:

1. Push the button.2. Select the mode.3. Turn the fan on high speed.4. Set the temperature control to a

comfortable setting.


Carbon monoxide gas is toxic.Breathing it can causeunconsciousness and even killyou.

Avoid any enclosed areas oractivities that expose you tocarbon monoxide.


Safety Labels

These labels are in the locationsshown. They warn yon of potentialhazards that could cause seriousinjury. Read these labels carefully.

If a label comes off or becomes hardto read, contact your Honda dealerfor a replacement.


SUN VISOR

DASHBOARDU.S. models only

RADIATOR

SEAT BELT TENSIONER

BATTERY

SRS

Canadian modelsU.S. models


Instruments and Controls

This section gives information aboutthe controls and displays thatcontribute to the daily operation ofyour Honda. All the essentialcontrols are within easy reach.

Control Locations............................ 42Indicator Lights................................ 43Gauges.............................................. 47

Speedometer................................ 47Select Button................................ 47Tachometer.................................. 47Temperature Gauge.................... 47Fuel Gauge................................... 48Odometer...................................... 48Trip Meter.................................... 48Maintenance Required

Indicator.................................... 49Controls Near the Steering

Wheel........................................ 50Headlights.................................... 51Daytime Running Lights............. 52Instrument Panel Brightness..... 52Turn Signals................................. 53Windshield Wipers...................... 53Windshield Washers................... 54

Steering Wheel Controls ................ 55Cruise Control.............................. 55

Keys and Locks................................ 58Keys............................................... 58Immobilizer System..................... 59Ignition Switch............................. 60

Power Door Locks....................... 62Remote Transmitter.................... 63Trunk............................................ 66Console Compartments.............. 67

Seat Adjustments............................. 68Power Windows............................... 69Convertible Top............................... 71

Opening the Convertible Top..... 71Closing the Convertible Top...... 74Convertible Top Cover................ 76Maintenance................................. 77

Hazard Warning............................... 79Mirrors.............................................. 79

Adjusting the Power Mirrors..... 79Parking Brake.................................. 80Beverage Holder.............................. 81Accessory Power Socket................ 81Audio Panel....................................... 82Interior Lights.................................. 83


Main Menu ▲ ▼

Control Locations


HEADLIGHT/TURN SIGNALSWITCH(P.51)

WINDSHIELD WIPER CONTROLS(P.53)


DOOR LOCKSWITCH(P.62)

HEATING AND AIRCONDITIONING(P.86)

POWER WINDOWSWITCHES(P.69)

MIRRORCONTROLS(P.79)

AUDIO SYSTEM(P.94)

ROOF SWITCH(P.71)

HAZARD WARNING SWITCH(P.79)


Indicator Lights

The instrument panel has manyindicators to give you importantinformation about your car.

* The U.S. instrument panel is shown. Differences for Canadian models arenoted in the text.


CRUISE CONTROL INDICATOR

MAINTENANCE REQUIREDINDICATOR

TURN SIGNAL AND HAZARDWARNING INDICATORS

ANTI-LOCK BRAKE SYSTEM(ABS) INDICATOR

ELECTRIC POWER STEERINGINDICATORHIGH BEAM INDICATOR

LOW FUEL INDICATORSEAT BELTREMINDER LIGHT

SUPPLEMENTALRESTRAINTSYSTEMINDICATOR

DOOR-OPEN INDICATORTRUNK-OPEN INDICATOR

IMMOBILIZER SYSTEM INDICATOR

MALFUNCTION INDICATOR LAMP

LOW OIL PRESSURE INDICATOR

CHARGING SYSTEMINDICATOR

PARKING BRAKE ANDBRAKE SYSTEMINDICATOR


Indicator Lights

Seat Belt Reminder Light

This indicator flashes for severalseconds when you turn the ignitionON (II). It flashes as a reminder toyou and your passenger to fasten theseat belts. A beeper also sounds ifyou have not fastened your seat belt.

If you do not fasten your seat belt,the beeper will stop after a fewseconds but the light stays on untilyou do. Both the light and the beeperstay off if you fasten your seat beltbefore turning on the ignition.

Low Oil PressureIndicator

The engine can be severely damagedif this light flashes or stays on whenthe engine is running. For completeinformation, see page 226.

Charging SystemIndicator

If this light comes on when theengine is running, the battery is notbeing charged. For completeinformation, see page 227.

U.S.

Parking Brake andBrake System IndicatorThis light has two functions:

1. It lights as a reminder that youhave not released the parkingbrake. Driving with the parkingbrake applied can damage thebrakes and tires.

2. If it remains lit after you releasethe parking brake while the engineis running, or comes on whiledriving, it can indicate a problemin the brake system. For completeinformation, see page 229 .


Canada

BRAKE


Indicator Lights

Supplemental RestraintSystem Indicator

This indicator lights when you turnthe ignition switch ON (II). If itcomes on at any other time, itindicates a problem in thesupplemental restraint system. Forcomplete information, see page 37.

Anti-lock Brake System (ABS)IndicatorThis light normally comes on for afew seconds when you turn theignition switch ON (II), and whenyou push the START button. If thislight comes on at any other time,there is a problem in the ABS. If thishappens, take the car to your dealerto have it checked. With the light on,your car still has normal brakingability but no anti-lock.

Malfunction IndicatorLamp

See page 228.

Trunk-open Indicator

This light comes on if the trunk lid isnot closed tightly.

Door-open Indicator

This light comes on if either door isnot closed tightly.

Electric Power Steering(EPS) Indicator

This light normally comes on whenyou turn the ignition ON (II) andgoes off after the engine starts. If itcomes on at any other time, there isa problem in the Electric PowerSteering system. If this happens,stop the car in a safe place and turnoff the engine. Reset the system byrestarting the engine, and watch theEPS light. If it does not go off, orcomes back on again while driving,take the car to your dealer to have itchecked. With the light on, the EPSis turned off, making the car harderto steer.


SRS EPS

U.S. Canada

ABS


Indicator Lights

Turn Signal andHazard WarningIndicators

The left or right turn signal lightblinks when you signal a lane changeor turn. if the light does not blink orblinks rapidly, it usually means oneof the turn signal bulbs is burned out(see page 192). Replace the bulb assoon as possible, since other driverscannot see that you are signalling.

When you turn on the HazardWarning switch, both turn signallights blink. All turn signals on theoutside of the car should flash.

High Beam Indicator

This light comes on with the highbeam headlights. See page 51 forinformation on the headlightcontrols.

"Daytime RunningLights" Indicator

Canadian models onlyThis indicator lights when you turnthe ignition switch to ON (II) withthe headlight switch off and theparking brake set. It should go off ifyou turn on the headlights or releasethe parking brake. If it comes on atany other lime, it means there is aproblem with the DRL. There mayalso be a problem with the highbeam headlights.

Immobilizer SystemIndicator

This indicator comes on for a fewseconds when you turn the ignitionswitch ON (II). It will then go off ifyou have inserted a properly-codedignition key. If it is not a properly-coded key, the indicator will blinkand the engine will not start (secpage 59).

This indicator also blinks severaltimes when you turn the ignitionswitch from ON (II) to ACCESSORY(I) or LOCK (0).

Cruise Control Indicator

This lights when you set the cruisecontrol. See page 55 for informationon operating the cruise control.

Low Fuel Indicator

This light comes on as a reminderthat you must refuel soon.


CRUISECONTROL

D R L


Gauges

Liquid crystal is used in the meterpanel. You may feel the indicatorsappear slowly in the low temperature.

SpeedometerThis shows your speed in miles perhour (mph) or kilometers per hour(km/h).

Select ButtonThe Select button switches thespeedometer reading between milesper hour and kilometer per hour. Italso changes the odometer and tripmeters to read in miles or kilometerscorrespondingly. To change thereadings, push the Select button andhold it until you hear a beep.

TachometerThe tachometer shows the enginespeed in revolutions per minute(rpm). To protect the engine fromdamage, never drive with thetachometer reading in the red zone.

Temperature GaugeThis shows the temperature of theengine's coolant. During normaloperation, the reading should be inthe middle of the gauge. In severedriving conditions, such as very hotweather or a long period of uphilldriving, the reading may reach nearthe red mark. If it reaches the redmark, pull safely to the side of theroad. Turn to page 223 forinstructions and precautions onchecking the engine's coolingsystem.


TEMPERATURE GAUGE SPEEDOMETER TACHOMETER

SELECT BUTTON


Gauges

TRIP METER FUEL GAUGE

TRIP BUTTON

ODOMETER SELECT BUTTON

Fuel GaugeThis shows how much fuel you have.It is most accurate when the car is onlevel ground. It may show slightlymore or less than the actual amountwhen you are driving on curvy orhilly roads.

OdometerThe odometer shows the total dis-tance your car has been driven. Itdisplays in miles and kilometers.It is illegal under U.S. federal law andCanadian provincial regulations todisconnect, reset, or alter theodometer with the intent to changethe number of miles or kilometersindicated.

Trip MeterThis meter shows the number ofmiles or kilometers driven since youlast reset it.

There are two trip meters, Trip Aand Trip B. Switch between Trip Aand Trip B by pressing the TRIPbutton repeatedly. Each trip meterworks independently, so you cankeep track of two different distances.

To reset a trip meter, display it andthen press and hold the TRIP buttonuntil you hear a beep and thenumber resets to 0.0.



Gauges

Maintenance Required Indicator

This indicator reminds you that it istime to take your car in forscheduled maintenance.Refer to the Maintenance Schedulesfor Normal and Severe DrivingConditions on pages 148 — 152.

When the distance driven since thelast scheduled maintenance reaches6,000 miles (9,600 km), the indicatorstarts blinking. If you exceed 7,500miles (12,000 km), the indicator stayon.

Your dealer will reset the indicatorwhen they perform the scheduledmaintenance. If someone elseperforms the maintenance, reset theindicator yourself.

To reset the maintenance requiredindicator, turn the ignition switch tothe LOCK position, then press andhold the trip meter reset button untilthe indicator resets.


MAINTENANCE REQUIRED INDICATOR


Controls Near the Steering Wheel

The two levers on the steering-column contain controls for drivingfeatures you use most often. The leftlever controls the turn signals,headlights, and high beams. Theright lever controls the windshieldwashers and wipers.

The engine start button and theremote audio controls are under theleft air vent.

The instrument panel brightnesscontrol is in the lower left corner ofthe speedometer.

The cruise control master switch isto the left of the steering column.


HEADLIGHTS/TURN SIGNALS(P.51)

INSTRUMENT PANEL BRIGHTNESS(P.52)

REMOTE AUDIOCONTROLS(P.112)

ENGINESTARTBUTTON(P.131)


CRUISE CONTROL MASTER SWITCH(P.55)

HORN WINDSHIELD WIPERS/WASHERS(P.53)



Headlights

The rotating switch on the left levercontrols the lights. Turning thisswitch to the position turnson the parking lights, taillights,instrument panel lights, side-markerlights, and rear license plate lights.Turning the switch to theposition turns on the headlights.

If you leave the lights on with theignition switch in ACCESSORY (I)or LOCK (0), you will hear areminder tone when you open thedriver's door.

To change from low beams to highbeams, push the turn signal leverforward until you hear a click. Theblue high beam indicator will light(see page 46). To return to lowbeams, pull the turn signal leverback.

To flash the high beams, pull theturn signal lever back lightly, thenrelease it. The high beams will comeon and go off. The high beams willstay on for as long as you hold thelever back, no matter what positionthe headlight switch is in.




Daytime Running LightsCanadian models onlyWith the headlight switch off, thehigh beam headlights come on withreduced brightness when you turnthe ignition switch to ON (II) andrelease the parking brake. Theyremain on until you turn the ignitionoff, even if you set the parking brake.

The headlights revert to normaloperation when you turn them onwith the switch.

Instrument Panel Brightness

The buttons in the lower left cornerof the instrument panel adjust thebrightness of the display in five steps.Push the + or — button five timesto see the full range.

The display dims when the parkinglights or headlights are turned on.Adjust the brightness to the desiredlevel with the headlight switch off,and also with the headlight switch on.Both settings will remain at thoselevels until you change them.

With the headlight switch on, youcan switch the display to full daytimebrightness by pushing and holdingthe + button. Push the — button toreturn the display to the originalbrightness.


BUTTON BUTTON



Turn Signals

Signal a turn or lane change with thislever. Push down on the lever tosignal a left turn, and up to signal aright turn. If you push it up or downall the way, the turn signal continuesto blink even when you release thelever. It shuts off automatically asyou complete the turn.

To signal a lane change, push lightlyon the turn signal lever in the properdirection and hold it. The lever willreturn to the center position as soonas you release it.

Windshield Wipers

This lever controls the windshieldwipers and washers. It has fivepositions;

MIST: mistOFF: offINT: intermittentLO: low speedHI: high speed

To select a position, push the leverup or down.


TURN SIGNAL LEVER

CONTINUED



In intermittent, the wipers operateevery few seconds. In low speed andhigh speed, the wipers run continu-ously.

To operate the wipers in mist mode,push the control lever up from theOFF position. The wipers run at highspeed until you release the lever.This gives you a quick way to clearthe windshield.

Windshield Washers

To clean the windshield, pull back onthe wiper control lever. The washersspray until you release the lever.

The wipers run at low speed whileyou're pulling the lever, thencomplete one more sweep of thewindshield after you release it.



Steering Wheel Controls

Cruise ControlCruise control allows you to maintaina set speed above 25 mph (40 km/h)without keeping your foot on theaccelerator pedal. It should be usedfor cruising on straight, openhighways. It is not recommended forconditions such as city driving,winding roads, slippery roads, heavyrain, or bad weather. You shouldhave full control of the car underthose conditions.

The cruise control, as it operates,moves the accelerator pedal. Yon candamage your vehicle's acceleratormechanism by resting your foot underthe pedal and blocking the movement.

Using the Cruise Control

1. Push in the Cruise Control MasterSwitch on the dashboard besidethe steering column. The indicatorby the switch will light.

2. Accelerate to the desired cruisingspeed above 25 mph (40 km/h).

CONTINUED


NOTICE

Improper use of the cruisecontrol can lead to a crash.

Use the cruise control onlywhen traveling on openhighways in good weather.



3. Press and release the SET/decelbutton on the steering wheel. TheCRUISE CONTROL light on theinstrument panel comes on toshow the system is now activated.

The cruise control may not holdthe set speed when you are goingup and down hills. If your speedincreases going down a hill, usethe brakes to slow down to thedesired speed. This will cancel the

cruise control. To resume the setspeed, press the RESUME/accelbutton. The CRUISE CONTROLlight on the instrument panelcomes on.

Changing the Set SpeedYou can increase the set cruisingspeed in any of these ways:

Press and hold the RESUME/accel button. The car will acceler-ate. When you reach the desiredcruising speed, release the button.

Push on the accelerator pedal. Ac-celerate to the desired cruisingspeed and press the SET/decelbutton.

To increase your speed in verysmall amounts, tap the RESUME/accel button repeatedly. Each timeyou do this, your car will speed upabout 1 mph (1.6 km/h).

You can decrease the set cruisingspeed in any of these ways:

Press and hold the SET/decelbutton. The car will decelerate.Release the button when youreach the desired speed.

To slow down in very smallamounts, tap the SET/decelbutton repeatedly. Each time youdo this, your car will slow downabout 1 mph (1.6 km/h).

Tap the brake or clutch pedallightly with your foot. TheCRUISE CONTROL light on theinstrument panel will go out.When the car slows to the desiredspeed, press the SET/decel button.The car will then maintain thedesired speed.


SET/decel

RESUME/accel



Even with the cruise control turnedon, you can still use the acceleratorpedal to speed up for passing. Aftercompleting the pass, take your footoff the accelerator pedal. The carwill return to the set cruising speed.

Resting your foot on the brake orclutch pedal will cause the cruisecontrol to cancel.

Cancelling the Cruise ControlYou can cancel the cruise control inany of these ways:

Tap the brake or clutch pedal.

Press the SET/decel and RE-SUME/accel buttons at the sametime.

Press the Cruise Control MasterSwitch.

When you tap the brake or clutchpedal, or press the SET and RE-SUME buttons at the same time, theCRUISE CONTROL light on theInstrument panel will go out and thecar will begin to slow down. You canuse the accelerator pedal in thenormal way.

The system remembers thepreviously-set cruising speed. Toreturn to that speed, accelerate toabove 25 mph (40 km/h) and pressthe RESUME/accel button until the

CRUISE CONTROL light comes on.The car will accelerate to the samecruising speed as before.

Pressing the Cruise Control MasterSwitch turns the system completelyoff and erases the previous cruisingspeed from memory. To use thesystem again, refer to Usiog theCruise Control.



Keys and Locks

Your car comes with two masterkeys and a valet key.The master key fits all the locks onyour car:

IgnitionDoorsTrunkLower console compartment

The valet key works only in theignition and the door locks. You cankeep the trunk and the lower consolecompartment locked when you leaveyour car and the valet key at aparking facility.

You should have received a keynumber plate with your keys. Youwill need this key number if you everhave to get a lost key replaced. Keepthe plate stored in a safe place. If youneed to replace a key, use onlyHonda-approved key blanks.

These keys contain electroniccircuits that are activated by theImmobilizer System. They will notwork to start the engine if thecircuits are damaged.

Protect the keys from directsunlight, high temperature, andhigh humidity.

Do not drop the keys or set heavyobjects on them.

Keep the keys away from liquids.If they get wet, dry them immedi-ately with a soft cloth.

The keys do not contain batteries.Do not try to take them apart.

Remote TransmitterYour car also comes with two remotetransmitters; see page 63 for anexplanation of the operation.


KEYNUMBERPLATE

Keys

MASTERKEY(BLACK)

VALET KEY(GREY)


Keys and Locks

Immobilizer SystemThe Immobilizer System protectsyour car from theft. A properly-coded master or valet key must beused in the ignition switch for theengine to start. If an improperly-coded key (or other device) is used,the engine's fuel system is disabled.

When you turn the ignition switch toON (II), the Immobilizer Systemindicator should come on for a fewseconds, then go out. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch toLOCK (0), remove the key, reinsertit, and turn the switch to ON (II)again.

The system may not recognize yourkey's coding if another immobilizerkey or other metal object is near theignition switch when you insert thekey. To make sure the systemrecognizes the key code:

Do not keep other immobilizerkeys on the same key ring.Use a plastic or leather key fob,not metal.Keep other keys away from yourvehicle's key and the ignitionswitch while trying to start theengine.

If the system repeatedly does notrecognize the coding of your key,contact your Honda dealer.

This indicator will also blink severaltimes when you turn the ignitionswitch from ON (II) to ACCESSORY(I) or LOCK (0).

Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour car undriveable.

If you have lost your key and youcannot start the engine, contact yourHonda dealer.


As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.


Keys and Locks

Ignition Switch

The ignition switch is on the rightside of the steering column. It hasthree positions:

LOCK (0)ACCESSORY (I)ON (II)

LOCK (0) — You can insert orremove the key only in this position.To switch from ACCESSORY toLOCK, you must push the key inslightly as you turn it. The anti-theftlock will lock the steering columnwhen you remove the key. If thefront wheels are turned, the anti-theft lock may sometimes make itdifficult to turn the key from LOCKto ACCESSORY. Firmly turn thesteering wheel to the left or to theright as you turn the key.


Removing the key from theignition switch while drivinglocks the steering. This cancause you to lose control.

Remove the key from theignition switch only whenparked.


Keys and Locks

ACCESSORY (I) — In this position,you can operate the audio systemand the accessory power socket.

ON (II) — This is the normal keyposition when driving. All featuresand accessories on the car are usable.Several of the lights on the instru-ment panel come on as a test whenyou turn the ignition switch fromACCESSORY to ON.

The engine can be started with thekey in this position by pressing theengine START button (see page131).

The engine will not start if theImmobilizer System does notrecognize the key's coding (see page59).

You will hear a reminder beeper ifyou leave the key in the ignitionswitch in the LOCK (0) orACCESSORY (I) position and openthe driver's door. Remove the key toturn off the beeper.



Keys and Locks

Power Door Locks

Each door has a lock tab next to theinside door handle. When you pushin the lock tab on the driver's door,both doors lock. Pulling out the locktab on the driver's door only unlocksthat door. The lock tab on thepassenger's door only locks andunlocks that door.

To lock the passenger's door whengetting out of the car, push the locktab in and close the door. To lock thedriver's door, remove the key fromthe ignition switch, pull out citherthe inside or outside door handle andpush the lock tab in, then close thedoor.

Both doors lock when you use thekey in the driver's door. Using thekey in the passenger's door onlylocks and unlocks that door.To unlock only the driver's doorfrom the outside, insert the key inthe driver's door lock, turn the keyand release it. If you turn the keyand hold it, both doors will unlock.


LOCK TAB


Keys and Locks

Remote Transmitter

You can lock and unlock your carwith the remote transmitter. Whenyou push the LOCK button, bothdoors lock. The side marker lightsand taillights flash once.

When you push the UNLOCK buttononce, only the driver's door unlocks.The parking lights and taillightsflash twice. The passenger's doorunlocks when you push the button asecond time.

The interior light (if the interior lightswitch is in the center position) willcome on when you press theUNLOCK button. If you do not openeither door, the light will go out inabout 30 seconds and the doors willautomatically relock. If you relockthe doors with the remotetransmitter before 30 seconds haveelapsed, the light will go offimmediately.

You cannot lock or unlock the doorswith the remote transmitter if eitherdoor is not fully closed or the key isin the ignition switch.

To open the trunk, push and hold theTRUNK RELEASE button forapproximately one second.

Horn OperationThe horn will sound if you push theLOCK button a second time withinfive seconds of locking the doors.

CONTINUED


LEDLOCKBUTTON

TRUNKRELEASEBUTTON

PANICBUTTON

UNLOCKBUTTON


Keys and Locks

Panic ModePanic mode allows you to remotelyactivate your car's security system toattract attention. When activated, thehorn will sound, and the exteriorlights will flash for about 30 seconds.To activate panic mode, press andhold the PANIC button for about onesecond.

To cancel Panic mode before 30seconds, press any button on theremote transmitter. You can alsoturn the ignition switch to ON (II).

Replacing the BatteryWhen the remote transmitter'sbattery begins to get weak, it maytake several pushes on the button tolock or unlock the doors, and theLED will get dim. Replace thebattery as soon as possible.

Battery type: CR2025

To replace the battery, remove theround cover on the back of the trans-mitter by turning it counterclockwisewith a coin.


Open

Close


Keys and Locks

Remove the old battery and note thepolarity. Make sure the polarity ofthe new battery is the same (+ sidefacing up), then insert it in thetransmitter.

Align the mark on the coverwith the mark on thetransmitter, then set the cover inplace and turn it clockwise.

Transmitter CareAvoid severe shock to the trans-mitter, such as dropping or throwingit. Also, protect it from extreme hotor cold temperatures.

Clean the transmitter case with asoft cloth. Do not use strongcleaners or solvents that could harmthe case. Immersing the transmitterin any liquid will harm the trans-mitter and cause it to not functionproperly.

If you lose a transmitter, you willneed to have the replacementprogrammed to your vehicle'ssystem by your Honda dealer. Anyother transmitters you have will alsoneed to be reprogrammed.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing- two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.


BATTERY ROUNDCOVER


Keys and Locks

Trunk

TRUNK RELEASE BUTTON

You can open the trunk in threeways:

Press the trunk release button inthe lower console compartment.Use the master key to open thetrunk lock. The valet key does notwork in this lock.Press and hold the trunk releasebutton on the remote transmitterfor approximately one second (seepage 63 ).

To close the trunk, press down onthe trunk lid.

To protect items in the trunk whenyou need to give the key to someoneelse, lock the lower consolecompartment with the master keyand give the other person the valetkey.

See page 124 for cargo loading andweight limit information. Keep thetrunk lid closed at all times whiledriving to avoid damaging the lid,and to prevent exhaust gas fromgetting into the interior. See CarbonMonoxide Hazard on page 39 .


MASTER KEY

Push


Keys and Locks

Console Compartments

The area between the seats has twocompartments. Open the lowercompartment by squeezing thehandle. Close it with a firm push.You can lock or unlock the lowercompartment with the master key.

The lever to open the uppercompartment is inside the lowercompartment. Push up the lever andlift the lid. To close, lower the lid andpush it down until it latches.


MASTER KEY


Seat Adjustments

See pages 12 — 13 for important safetyinformation and warnings about how toproperly position seats and seat-hacks.

Make all seat adjustments beforeyou start driving.

To adjust the seat forward andbackward, pull up on the lever underthe seat cushion's front edge. Movethe seat to the desired position andrelease the lever. Try to move theseat to make sure it is locked inposition.

To change the angle of the seat-back,pull up on the lever on the outside ofthe seat bottom. Move the seat-backto the desired position and releasethe lever. Let the seat-back latch inthe new position.



Power Windows

Your car's windows are electrically-powered. Turn the ignition switch toON (II) to raise or lower eitherwindow.

DRIVER'S WINDOW SWITCH

Each door has a switch that controlsits window. To open the window,push the switch down and hold it.Release the switch when you wantthe window to stop. Close thewindow by pulling back on theswitch and holding it.

The driver's armrest has a masterpower window control panel. Toopen the passenger's window, pushdown on the switch and hold it downuntil the window reaches the desiredposition. To close the window, pullback on the window switch. Releasethe switch when the window gets tothe position you want.

CONTINUED


PASSENGER'S WINDOW SWITCH

MAINSWITCH

Closing a power window onsomeone's hands or fingers cancause serious injury.

Make sure your passenger isaway from the window beforeclosing it.


Power Windows

The master control panel also con-tains these extra features:

AUTO — To open the driver'swindow fully, push the windowswitch firmly down and release it.The window automatically goes allthe way down. To stop the windowfrom going all the way down, pullback on the window switch briefly.

To open the driver's window onlypartially, push the window switchdown lightly and hold it. The windowwill stop as soon as you release theswitch.

The AUTO function only works tolower the driver's window. To raisethe window, you must pull back onthe window switch and hold it untilthe window reaches the desiredposition.

The MAIN switch controls power tothe passenger's window. With thisswitch off, the passenger's windowcannot be raised or lowered. TheMAIN switch does not affect thedriver's window. Keep the MAINswitch off when you have a child inthe car so the child does not getinjured by operating the windowunintentionally.



Convertible Top

The convertible top on your Hondalowers and raises electrically.

Before operating the convertible top,make sure the car is parked on levelground, and that there is enoughclearance above the top.

It is advisable to raise the topwhenever you park the car. Thishelps to protect the car fromunexpected weather changes, andfrom theft of your valuables.

Do not operate the convertible top infreezing weather. You can damagethe material and mechanism of theconvertible top.

Do not operate the lop if it is wet,dirty, or covered with ice or snow.

Never drive the car with theconvertible top half open.

Do not lower or raise the top whilethe engine is running.

Do not operate the convertible top ifthe car is raised on the jack, a hoist,or on jack stands.

Lowering the Convertible TopPark your car in the shade wheneverpossible.Extended exposure to sunlight cancause the convertible top todeteriorate.

1. Apply the parking brake. Theconvertible top will not operateunless the parking brake is fullyengaged.

2. Turn the ignition switch to ON (II).

3. There is a latch on each side. Pushin the lab and pull the lockinglever down.

CONTINUED


NOTICE

LOCKING LEVER

LATCH TAB


Convertible Top

4. Push the top forward while yourelease the latches from thewindshield header by pushing thelocking levers forward.

5. With the latches released, pullback on the locking levers andpush them up until they latch.

6. Pull back and hold the ROOFswitch.


LATCH

LOCKING LEVER

LOCKING LEVER ROOF SWITCH


Convertible Top

The windows will lower and the roofwill fold back. Release the ROOFswitch when the roof is retractedcompletely into the rear shelf.

Do not sit on the folded convertible top,or put heavy items on top of it.


Operating the convertible topwhile any part of a passenger isin the way of the convertible topcan cause serious injury.

Make sure that you, yourpassenger or any other peoplearound the car are clear of theway of the moving convertibletop.

NOTICE


Convertible Top

Raising the Convertible Top1. Apply the parking brake. The

convertible top will not operateunless the parking brake is fullyengaged.

2. Turn the ignition switch to ON (II).

3. Push the ROOF switch forwardand hold it.

4. The windows, if raised, will lowerautomatically.


ROOF SWITCH


Convertible Top

The convertible top will raise.Release the ROOF switch when thetop reaches the windshield header.

5. Push in the tab on each lockinglever and pull the locking leverdown.

6. While pushing the convertible topforward, push the locking leverforward and set the latch into thewindshield header.

7. Pull back on the locking lever andpush it up until it latches. Makesure it is securely latched.

Do not put heavy items on the closedconvertible top. You can damage thematerial and the mechanism.


LOCKING LEVER

LATCHTAB

Operating the convertible topwhile any part of a passenger isin the way of the convertible topcan cause serious injury.

Make sure that you, yourpassenger or any other peoplearound the car are clear of theway of the moving convertibletop.

NOTICE

WINDSHIELD HEADER


Convertible Top

Convertible Top CoverUse the convertible top cover whenthe top is folded to help preventforeign objects, dirt, etc., fromgetting into the material andmechanism.

1. Remove the convertible top coverfrom the trunk.

2. Connect the snaps on the topcover to the four pins on the backof the interior panel.

3. Hook the fastener string to the pinon each side wall of the passengercompartment.



Convertible Top

4. Fit deep the rear part of the topcover into the space behind theconvertible top.

5. To remove the top cover, reversethe attaching procedure.

Maintenance

Dust is the main cause of creaks orother sounds coming from theconvertible top.Regularly clean the body seals withglass cleaner and a soft cloth. Do notuse a scraper or de-icing chemicalsto remove frost, snow, or ice fromthe top or rear window.

Every three to six months,depending on how often the top isfolded, rub a thin film of Shin-EtsuSilicone grease (available from yourHonda dealer, P/N 08798-9013) ontothe seals wherever they touch theconvertible top or each other.



Convertible Top

To reduce the possibility of leaks:

Use the door pull to open andclose the door. Do not push or pullon the door glass.

Do not lean or sit on an open door.

The convertible top seals aredesigned to promote the flow ofwater off the roof. Spraying highpressure water directly on theseals can distort them, causing aleak. Use only a low pressurewater stream when using a hose,and avoid car washes.



Hazard Warning, Mirrors

Hazard Warning

Push the red button next to the roofswitch to turn on the hazard warninglights (four-way flashers). Thiscauses all four outside turn signalsand both indicators in the instrumentpanel to flash. Use the hazardwarning lights if you need to park ina dangerous area near heavy traffic,or if your vehicle is disabled.

Mirrors

Keep the inside and outside mirrorsclean and adjusted for best visibility.Be sure to adjust the mirrors beforeyou start driving.

The inside mirror has day and nightpositions. The night position reducesglare from headlights behind you.Flip the tab on the bottom edge ofthe mirror to select the clay or nightposition.

Adjusting the Power Mirrors

Adjust the outside mirrors with theadjustment switch on the driver'sdoor armrest:

1. Turn the ignition switch ON (II).

2. Move the selector switch to L(driver's side) or R (passenger'sside).


TAB ADJUSTMENT SWITCH

SELECTOR SWITCH

CONTINUED


Mirrors, Parking Brake

3. Push the appropriate edge of theadjustment switch to move themirror right, left, up or down.

4. When you finish, move theselector switch to the center (off)position. This turns off theadjustment switch so you can'tmove a mirror out of position byaccidentally bumping the switch.

Parking Brake

To apply the parking brake, pull thelever up fully. To release it, pull upslightly, push the button, and lowerthe lever. The parking brake light onthe instrument panel should go outwhen the parking brake is fullyreleased (see page 44). If you try todrive the vehicle without releasingthe parking brake, the ABS indicatormay come on, and the ABS may notwork properly.

Driving the car with the parking brakeapplied can damage the rear brakesand axles.


NOTICE


Beverage Holder, Accessory Power Socket

Beverage Holder

To open the beverage holder, pushon the front edge.

Be careful when you are using thebeverage holder. A spilled liquid thatis very hot can scald you or yourpassenger. Spilled liquids can alsodamage the upholstery, carpeting,and electrical components in theinterior.

Accessory Power Socket

To use the accessory power socket,pull out on the cover. The ignitionswitch must be in ACCESSORY (I)or ON (II).

This socket is intended to supplypower for 12 volt DC accessoriesthat are rated 120 watts or less (10amps).

It will not power an automotive typecigarette lighter element.



Audio Panel

To open the audio panel, push on thetop center and let the panel swingdown. To close, pivot the panel upand push on it until it latches. Referto page 94 for operation of theaudio system.



Interior Lights

The interior light has a three-position switch. In the OFF position,the light does not come on. In thecenter position, the interior lightcomes on when you open either door.In the ON position, the interior lightstays on continuously.

In addition, when the three positionswitch is in the center position withboth doors closed, the two bulbs inthe interior light can be turned onseparately by the pushbuttonswitches next to them. Push theswitch to turn the light on or off.

If the three-position switch is in thecenter position, the interior light willcome on when you remove the keyfrom the ignition switch.



Comfort and Convenience Features

The heating and air conditioningsystems in your Honda provide acomfortable driving environment inall weather conditions.

The standard audio system hasmany features. This section de-scribes those features and how touse them. (If you selected anoptional audio system, refer to theoperating instructions that camewith it.)

Heating and Cooling........................ 86What Each Control Does............ 80How to Use the System............... 88To Turn Everything Off............. 93

Audio SystemAM/FM/CD Audio System....... 94Operating the Radio.................... 95Adjusting the Sound.................... 99Audio System Lighting............. 100Radio Frequencies..................... 100Radio Reception......................... 101Operating the CD Player.......... 102Operating the CD Changer...... 107Protecting Compact Discs........ 108CD Player Error Indications..... 110CD Changer Error

Indications.............................. 111Remote Audio Controls ............ 112Theft Protection........................ 113


Main Menu ▲ ▼

Heating and Cooling

Proper use of the Heating andCooling system can make theinterior dry and comfortable, andkeep the windows clear for bestvisibility.

What Each Control Does

Fan Control LeverPushing this lever up and downincreases and decreases the fanspeed. The indicators next to thelever show you the speed selected.

Temperature Control DialTurning this dial clockwise increasesthe temperature of the air flow.

Air Conditioning (A/C) ButtonThis button turns the air condi-tioning ON and OFF. The indicatorin the button lights when the A/C ison.

Recirculation ButtonThis button controls the source ofthe air going into the system. Whenthe indicator in this button is lit, airfrom the car's interior is sentthrough the system again (Recircula-tion mode). When the indicator is off,air is brought in from outside the car(Fresh Air mode).


RECIRCULATIONBUTTON

AIR CONDITIONINGSWITCH

FAN CONTROL LEVER

MODE CONTROLDIAL

TEMPERATURECONTROL DIAL


Heating and Cooling

Mode Control DialUse the MODE control dial to selectthe vents the air flows from.

Air flows from the vents onboth sides of the instrument panel,and from the dashboard vent in frontof the passenger.

Air flow is divided betweenthe vents in the dashboard and thefloor vents.

Air flows from the centervents in the dashboard above theaudio system, the vents on bothsides of the instrument panel andfrom the floor vents. Select thisposition when you drive with theconvertible top folded.

Air flows from the floorvents and the vents on both sides ofthe instrument panel.

Air flow is divided betweenthe floor vents, the defroster vents atthe base of the windshield and thevents on both sides of the instrumentpanel.

Air flows from the defrostervents at the base of the windshieldand the vents on both sides of theinstrument panel.

When you select the systemautomatically switches to Fresh Airmode and turns on the A/C.



Heating and Cooling

Vent Controls

You can adjust the direction of theair coming from the vents on bothsides of the instrument panel and atthe corner of the dashboard on thepassenger's side. To adjust the airflow up and down, move the tab inthe center of each vent up and down.To adjust it left and right, turn thedial under each vent left and right.

You can shut off the air flow fromeach vent by turning the dial all theway toward the mark until itclicks.

How to Use the SystemThis section covers how to set up thesystem controls for ventilation,heating, cooling, dehumidifying, anddefrosting.

The engine must be running for theheater and air conditioning togenerate hot and cold air. The heateruses engine coolant to warm the air.If the engine is cold, it will be severalminutes before you feel warm aircoming from the system.The air conditioning does not rely onengine temperature.


SIDE VENTCENTER VENT


Heating and Cooling

It is best to leave the system in FreshAir mode under almost all conditions.Keeping the system in Recirculationmode, particularly with the A/C off,can cause the windows to fog up.Switch to Recirculation mode whenyou are driving through smoky ordusty conditions, then switch back toFresh Air mode when the conditionclears.

The outside air intakes for theheating and cooling system are atthe base of the windshield. Keepthese clear of leaves and otherdebris.

VentilationThe flow-through ventilation systemdraws in outside air, circulates itthrough the interior, then exhausts itthrough vents behind the seat-backs.

1. Turn the temperature control dialall the way to the left.Make sure the A/C is off.

2. Select and Fresh Air mode.3. Set the fan to the desired speed.


CONTINUED

RECIRCULATIONBUTTON


MODE CONTROLDIAL


FAN CONTROL LEVER


Heating and Cooling

To Cool with A/C1. Turn on the A/C by pressing the

button. The light in the buttonshould come on when a fan speedis selected.

2. Make sure the temperaturecontrol dial is all the way to the left.

3. Select4. If the outside air is humid, select

Recirculation mode. If the outsideair is dry, select Fresh Air mode.Set the fan to the desired speed.

If the interior is very warm frombeing parked in the sun, you can coolit down more rapidly by setting upthe controls this way:

1. Start the engine.2. Turn on the A/C by pressing the

button. Make sure the tempera-ture control dial is all the way tothe left.

3. Set the fan to maximum speed.4. Open the windows partially. Select

and Recirculation mode.

When the interior has cooled downto a more comfortable temperature,close the windows and set thecontrols as described for normalcooling.

Air conditioning places an extra loadon the engine. Watch the enginecoolant temperature gauge (see page47) when driving in stop-and-gotraffic or climbing a long, steep hill.If it moves near the red mark, turnoff the A/C until the reading returnsto normal.


RECIRCULATIONBUTTON

FAN CONTROL LEVER


MODE CONTROLDIAL



Heating and Cooling

To HeatTo warm the interior:

1. Start the engine.2. Select and Fresh Air mode.3. Set the fan to the desired speed.4. Adjust the warmth of the air with

the temperature control dial.

To Heat and Dehumidify with AirConditioningAir conditioning, as it cools, removesmoisture from the air. When used incombination with the heater, itmakes the interior warm and dry.

1. Switch the fan on.2. Turn on the air conditioning.3. Select and Fresh Air mode.4. Adjust the temperature control

dial so the mixture of heated andcooled air feels comfortable.

This setting is suitable for all drivingconditions whenever the outsidetemperature is above 32° F (0°C).

To Defog and DefrostTo remove fog from the inside of thewindows:

1. Switch the fan on.2. Select

When you select thesystem automatically switches toFresh Air mode and turns on theA/C.

3. Adjust the temperature controldial so the air flow from thedefroster vents feels warm.

When you switch to another modefrom the A/C stays on.Press the A/C button to turn if off.

CONTINUED



Heating and Cooling

To remove exterior frost or ice fromthe windshield and side windowsafter the vehicle has been sitting outin cold weather:

1. Start the engine.2. Select

When you select thesystem automatically switches toFresh Air mode and turns on theA/C.

3. Switch the fan and temperaturecontrols to maximum.

To rapidly remove exterior frost orice from the windshield (on very colddays), first select the Recirculationmode. Once the windshield is clear,select the Fresh Air mode to avoidfogging the windows.


RECIRCULATIONBUTTON

TEMPERATURE CONTROL DIAL

FAN CONTROL LEVER


MODE CONTROL DIAL


Heating and Cooling

These settings direct all the air flowto the defroster vents at the base ofthe windshield and the side windowdefroster vents. The air flow will getwarmer and clear the windows fasteras the engine warms up. You canclose the side vents with the dialbeside each vent. This will sendmore warm air to the windshielddefroster vents.

For safety, make sure you have aclear view through all the windowsbefore driving away.

To Turn Everything OffTo shut off the system temporarily,turn off the fan (no lightsilluminated).

You should shut the systemcompletely off only for the first fewminutes of driving in cold weather,until the engine coolant warms upenough to operate the heater. Keepthe fan on at all other times so staleair does not build up in the interior.



Audio System

AM/FM/CD Audio SystemYour Honda's audio system providesclear reception on both AM and FMbands, while the preset buttons allowyou to easily select your favoritestations.

The anti-theft feature will disable thesystem if it is disconnected from thevehicle's battery. To get the systemworking again, you must enter acode number (see page 113).



Audio System

Operating the RadioThe ignition switch must be inACCESSORY (I) or ON (II) tooperate the audio system. Turn thesystem on by pushing the PWR/VOL knob. Adjust the volume byturning the same knob.

The band and frequency that theradio was last tuned to is displayed.To change bands, press the AM/FMbutton. On the FM band, ST will bedisplayed if the station is broadcast-ing in stereo. Stereo reproduction onAM is not available.

You can use any of four methods tofind radio stations on the selectedband: TUNE, SEEK, SCAN or thePreset buttons.

TUNE — Use the TUNE bar to tunethe radio to a desired frequency.Press the side of the bar to tuneto a higher frequency, and the

side to tune to a lowerfrequency. The frequency numberswill start to change rapidly. Releasethe bar when the display reaches thedesired frequency. To change thefrequency in small increments, pressand release the TUNE bar quickly.

SEEK — The SEEK functionsearches the band for a station witha strong signal. To activate it, pressthe SEEK bar on either the or

side, then release it.Depending on which side you press,the system scans upward or down-ward from the current frequency. Itstops when it finds a station with astrong signal.

CONTINUED



Audio System

SCAN — The SCAN functionsamples all the stations with strongsignals on the selected band. Toactivate it, press the SCAN button,then release it. When the system isin the SCAN mode, SCAN shows inthe display. The system will scan upthe band for a station with a strongsignal. When it finds one, it will stopand play that station forapproximately five seconds. If you donothing, the system will then scanfor the next strong station and playthat for five seconds. When it plays astation that you want to continuelistening to, press the SCAN buttonagain.

Preset — You can store the fre-quencies of your favorite radiostations in the six preset buttons.Each button will store one frequencyon the AM band, and two on the FMband.


AM/FM BUTTON STEREO INDICATOR

TUNE BARPWR/VOLKNOB

PRESET BUTTONS

SCANBUTTON

SEEK BAR


Audio System

To store a frequency:

1. Select the desired band, AM orFM. FM1 and FM2 let yon storetwo frequencies with each Presetbutton.

2. Use the TUNE or SEEK functionto tune the radio to a desiredstation.

3. Pick the Preset button you wantfor that station. Press the buttonand hold it until you hear a beep.

4. Repeat steps 1 to 3 to store a totalof six stations on AM and twelveon FM.

Once a station's frequency is stored,simply press and release the properPreset button to tune to it.The preset frequencies will be lost ifyour vehicle's battery goes dead, isdisconnected, or the radio fuse isremoved. CONTINUED


AM/FM BUTTON

TUNE BAR

SEEK BAR

PRESET BUTTONS


Audio System

AUTO SELECT — If you aretraveling far from home and can nolonger receive the stations youpreset, you can use the Auto Selectfeature to find stations in the localarea.

To activate Auto Select, press theA. SEL button. A. SEL will flash inthe display, and the system will gointo scan mode for several seconds.It automatically scans both bands,looking for stations with strongsignals; It stores the frequencies ofsix AM stations and twelve FMstations in the preset buttons. Youcan then use the preset buttons toselect those stations.

If you are in a remote area, AutoSelect may not find six strong AMstations or twelve strong FM stations.If this happens, you will see a "0"displayed when you press any presetbutton that does not have a stationstored.

If you do not like the stations AutoSelect has stored, you can storeother frequencies in the presetbuttons. Use the TUNE, SEEK, orSCAN function to find the desiredfrequencies, then store them in theselected preset buttons as describedpreviously.

Auto Select does not erase thefrequencies that you preset pre-viously. When you return home, turnoff Auto Select by pressing theA. SEL button. The preset buttonswill then select the frequencies youoriginally set.


TUNE BAR SEEK BAR

SCAN BUTTONA. SEL BUTTON

AUTO SELECT INDICATOR


Audio System

Adjusting the SoundBalance/Fader These twocontrols adjust the strength of thesound coming from each speaker.The Balance control adjusts the side-to-side strength, while the Fadercontrol adjusts the front-to-backstrength.To adjust the f ader, push on theBASS/FADER control knob to get itto pop out. Pull it out slightly farther,and adjust the front-to-back sound toyour liking. Push the knob back inwhen you are done so you cannotchange the setting by accidentallybumping it. With only two speakers,set the fader control to themaximum front setting.To adjust the balance, push on theTREBLE/BALANCE control knobto get it to pop out. Pull it out slightlyfarther, and adjust the side-to-sidesound to your liking. Push the knobback in when you are done so youcannot change the setting byaccidentally bumping it.

Treble/Bass — Use these controlsto adjust the tone to your liking.

To adjust the Treble level, push onthe TREBLE/BALANCE controlknob to get it to pop out. Withoutpulling it out farther, turn the knobto adjust the treble level. Push theknob back in when you are done soyou cannot change the setting byaccidentally bumping it.

To adjust the Bass level, push on theBASS/FADER control knob to get itto pop out. Without pulling it outfarther, turn the knob to adjust thebass level. Push the knob back inwhen you are done so you cannotchange the setting by accidentallybumping it.


BASS/FADERCONTROL

TREBLE/BALANCECONTROL


Audio System

Audio System LightingThe audio system illuminates whenthe parking lights are on, even if theradio is turned off.

Radio FrequenciesYour Honda's radio can receive thecomplete AM and FM bands.Those hands cover these frequen-cies:

AM band:530 to 1,710 kilohertzFM band:87.7 to 107.9 megahertz

Radio stations on the AM band areassigned frequencies at least tenkilohertz apart (530, 540, 550).Stations on the FM band areassigned frequencies at least 0.2megahertz apart (87.9, 88.1, 88.3).

Stations must use these exactfrequencies. It is fairly common forstations to round-off the frequency intheir advertising, so your radio coulddisplay a frequency of 100.9 eventhough the announcer may identifythe station as "FM101."



Audio System

Radio ReceptionHow well your Honda's radioreceives stations is dependent onmany factors, such as the distancefrom the station's transmitter,nearby large objects, and atmos-pheric conditions.

A radio station's signal gets weakeras you get farther away from itstransmitter. If you are listening to anAM station, you will notice the soundvolume becoming weaker, and thestation drifting in and out. If you arelistening to an FM station, you willsee the stereo indicator flickering offand on as the signal weakens.Eventually, the stereo indicator willgo off and the sound will fadecompletely as you get out of range ofthe station's signal.

Driving very near the transmitter ofa station that is broadcasting on afrequency close to the frequency ofthe station you are listening to canalso affect your radio's reception.You may temporarily hear bothstations, or hear only the station youare close to.


CONTINUED


Audio System

Radio signals, especially on the FMband, are deflected by large objectssuch as buildings and hills. Yourradio then receives both the directsignal from the station's transmitter,and the deflected signal. This causesthe sound to distort or flutter. This isa main cause of poor radio receptionin city driving.

Radio reception can be affected byatmospheric conditions such asthunderstorms, high humidity, andeven sunspots. You may be able toreceive a distant radio station oneclay and not receive it the next daybecause of a change in conditions.

Electrical interference from passingvehicles and stationary sources cancause temporary reception problems.



Audio System


As required by the FCC:Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.


Audio System

Operating the CD PlayerYou operate the CD player with thesame controls used for the radio.

With the ignition switch inACCESSORY (I) or ON (II), insertthe disc into the CD slot. Push thedisc in halfway, the drive will pull itin the rest of the way and begin toplay. The number of the track that isplaying is shown in the display.

You can also play 3-inch (8-cm) discswithout using an adapter ring. In allcases, play only standard round discs.Odd-shaped CDs may jam in thedrive or cause other problems.

When the system reaches the end ofthe disc, it will return to the begin-ning and play that disc again.


AM/FM BUTTON CD SLOT TUNE BAR

EJECT BUTTON

SEEK/SKIPBAR

A.SEL/RDM BUTTONCD BUTTON

RPT BUTTON


Audio System

You can switch to the radio while aCD is playing by pressing the A M /FM button. Press the CD button toreturn to playing the CD. The CDwill begin playing where it left off.

If you turn the system off while a CDis playing, either with the PWR/VOLknob or by turning off the ignition,the disc will stay in the drive. Whenyou turn the system back on, the CDwill begin playing where it left off.

Press the eject button to remove thedisc from the drive.

If you eject the disc, but do notremove it from the slot, the systemwill automatically reload the discafter 15 seconds and put the CDplayer in pause mode. To beginplaying the disc, press the CD button.

You can use the TUNE and SEEK/SKIP bars while a disc is playing toselect passages and change tracks.

To move rapidly within a track, pressand hold the TUNE bar. Press the

side to move forward. You willsee CUE in the display. Press the

side to move backward. Youwill see REW displayed. Release thebar when the system reaches thepoint you want.

Each time you press the side ofthe SEEK/SKIP bar, the systemskips forward to the beginning of thenext track. Press the side toskip backward to the beginning ofthe current track. Press it again toskip to the beginning of the previoustrack.

CONTINUED



Audio System

REPEAT — To activate the Repeatfeature, press and release the RPTbutton. You will see RPT in thedisplay. The system continuouslyreplays the current track. Press theRPT button again to turn it off.

RANDOM PLAY — This feature,when activated, plays the tracks onthe CD in random order, rather thanin the order they are recorded on theCD. To activate Random Play, pressand release the A. SEL/RDM button.You will see RDM in the display. Thesystem will then select and playtracks randomly. This continuesuntil you deactivate Random Play bypressing A. SEL/RDM again.

If the system is in Repeat mode, youmust turn it off by pressing the RPTbutton before selecting Random Play.



Audio System

Operating the CD Changer(Optional)A Compact Disc changer is availablefor your vehicle. It holds up to sixdiscs, providing several hours ofcontinuous entertainment. Youoperate this CD changer with thesame controls used for the in-dashCD player.

Load the desired CDs in themagazine and load the magazine inthe changer according to theinstructions that came with the unit.Play only standard round discs. Odd-shaped CDs may jam in the drive orcause other problems.

To select the CD changer, press theCD button. The disc and tracknumbers will be displayed.

To select a different disc, press theappropriate preset button (1 — 6). Ifyou select an empty slot in themagazine, the changer will, afterfinding that slot empty, try to loadthe CD in the next slot. Thiscontinues until it finds a CD to loadand play.

If you load a CD in the in-dash playerwhile the changer is playing a CD,the system will stop the changer andbegin playing the in-dash CD. Toselect the changer again, press theCD button. Play will begin where itleft off. Use the CD button to switchbetween the player and the changer.

If you eject the in-dash CD while it isplaying, the system will automaticallyswitch to the CD changer and beginplay where it left off. If there are noCDs in the changer, the display willflash. You will have to select anothermode (AM or FM) with the button.

When you switch back to CD mode,the system selects the same unit (in-dash or changer) that was playingwhen you switched out of CD mode.

To use the SKIP, REPEAT, andRANDOM functions, refer to the in-dash player operating instructions.



Audio System

Protecting Compact Discs

Handle a CD by its edges; nevertouch either surface. Contaminationfrom fingerprints, liquids, felt-tippens, and labels can cause the CD tonot play properly, or possibly jam inthe drive.

When a CD is not being played, storeit in its case to protect it from dustand other contamination. To preventwarpage, keep CDs out of directsunlight and extreme heat.

To clean a disc, use a clean soft clothWipe across the disc from the centerto the outside edge.



Audio System

A new CD may be rough on theinner and outer edges. The smallplastic pieces causing this roughnesscan flake off and fall on the re-cording surface of the disc, causingskipping or other problems. Removethese pieces by rubbing the innerand outer edges with the side of apencil or pen.

Never try to insert foreign objects inthe CD player or the magazine.



Audio System

CD Player Error IndicationsIf you see an error indication in thedisplay while operating the CDplayer, find the cause in the chart tothe right. If you cannot clear theerror indication, take the vehicle toyour Honda dealer.



Audio System

CD Changer Error IndicationsIf you see an error indication in thedisplay while operating the CDchanger, find the cause in the chartto the right. If you cannot clear theerror indication, take the vehicle toyour Honda dealer.



Audio System

Remote Audio Controls

Four controls for the audio systemare on the left side of the dashboardby the instrument panel. These letyou control basic fund ions withoutdistracting your attention fromdriving.

Use the VOLUME lever to adjust thevolume. Push the lever up toincrease the volume and down todecrease it. Hold the lever until thevolume reaches the desired level,

then release it.

If you want to mute the soundtemporarily, push the MUTE button.The indicator in the button will lightto indicate the mute function is on.Press the button again to cancelMUTE.

The AUDIO CONTROL buttonchanges the mode. Pressing thebutton repeatedly selects AM, FM1,FM2, or CD (if a CD is loaded) two.

The CHANNEL button has twofunctions, depending on whether youare listening to the radio, or playing aCD.

If you are listening to the radio, usethe CHANNEL button to changestations. Each time you press thisbutton, the system advances to thenext preset station on the band youare listening to. You will see thenumber of the selected Preset button

in the audio system display.

If you are playing a CD, the systemskips to the beginning of the nexttrack each time you push theCHANNEL button.

These controls work only with thefactory-installed audio system. Theywill not function if you install anyother system.


AUDIO CONTROLBUTTON

CHANNELBUTTON

MUTEBUTTON

VOLUMELEVER


Audio System

Theft ProtectionYour car's audio system will disableitself if it is disconnected fromelectrical power for any reason. Tomake it work again, the user mustenter a specific five-digit code in thePreset buttons. Because there arehundreds of number combinationspossible from five digits, making thesystem work without knowing theexact code is nearly impossible.

You should have received a card thatlists your audio system's codenumber and serial number. It is bestto store this card in a safe place athome. In addition, you should writethe audio system's serial number inthis Owner's Manual. If you shouldhappen to lose the card, you mustobtain the code number from yourHonda dealer. To do this, you willneed the system's serial number.

If your car's battery is disconnectedor goes dead, or the radio fuse isremoved, the audio system willdisable itself. If this happens, youwill see "Code" in the frequencydisplay the next time you turn on thesystem. Use the Preset buttons toenter the five-digit code. If it isentered correctly, the radio will startplaying.

If you make a mistake entering thecode, do not start over or try tocorrect your mistake. Complete thefive-digit sequence, then enter thecorrect code. You have ten tries toenter the correct code. If you areunsuccessful in ten attempts, youmust then leave the system on forone hour before trying again.

You will have to store your favoritestations in the Preset buttons afterthe system begins working. Youroriginal settings were lost whenpower was disconnected.



Before Driving

Before you begin driving your Honda,you should know what gasoline touse, and how to check the levels ofimportant fluids. You also need toknow how to properly store luggageor packages. The information in thissection will help you. If you plan toadd any accessories to your vehicle,please read the information in thissection first.

Break-in Period.............................. 116Gasoline.......................................... 116Service Station Procedures .......... 117

Filling the Fuel Tank................. 117Opening the Hood..................... 118

Oil Check................................ 119Engine Coolant Check.......... 120

Fuel Economy................................ 121Car Condition............................. 121Driving Habits............................ 121

Accessories and Modifications.... 122Accessories................................. 122Modifications............................. 123Additional Safety Precaution.... 123

Carrying Cargo.............................. 124General Precautions...................... 127

Before Driving

Main Menu ▲ ▼

Break-in Period, Gasoline

Break-in PeriodHelp assure your car's futurereliability and performance by payingextra attention to how you driveduring the first 600 miles (1,000 km).During this period:

Avoid full-throttle starts and rapidacceleration.Do not exceed 5,500 rpm for thefirst 600 miles (1,000 km) ofoperation.

Avoid hard braking. New brakesneed to be broken-in by moderateuse for the first 200 miles (300km).

You should follow these same re-commendations with an overhauledor exchanged engine, or when thebrakes are relined.

GasolineYour Honda is designed to operateon premium unleaded gasoline with apump octane number of 91 or higher.

If you are unable to find premiumunleaded gasoline, you may substi-tute an unleaded regular gasoline.The engine will compensate for thelower octane, but you may notice aslight decrease in power as a result.

We recommend gasolines containingdetergent additives that help preventfuel system and engine deposits.

Using gasoline containing lead willdamage your car's emissionscontrols. This contributes to airpollution.

In Canada, some gasolines containan octane-enhancing additive calledMMT. If you use such gasolines,your emission control systemperformance may deteriorate andthe Malfunction Indicator Lamp onyour instrument panel may turn on.If this happens, contact yourauthorized Honda dealer for service

Before Driving


Service Station Procedures

Filling the Fuel Tank

1. Because the fuel fill cap is on thedriver's side of the car, park withthat side closest to the servicestation pumps.

2. Open the fuel fill door by pullingon the knob on the driver's doorjamb.

FUEL FILL CAP

3. Remove the fuel fill cap slowly.You may hear a hissing sound aspressure inside the tank escapes.Place the cap in the holder on thefuel fill door.

CONTINUED

Before Driving

Gasoline is highly flammableand explosive. You can beburned or seriously injuredwhen handling fuel.

Stop the engine and keepheat, sparks, and flame away.Handle fuel only outdoors.Wipe up spills immediately.



4. Stop filling the tank after the fuelnozzle automatically clicks off. Donot try to "lop off" the tank, leavesome room for the fuel to expandwith temperature changes.

5. Screw the fuel fill cap back on,tighten it until it clicks at leastthree times. If you do not properlytighten the cap, the MalfunctionIndicator Lamp may come on (seepage 228).

6. Push the fuel fill door closed untilit latches.

Opening the Hood

1. Shift to Neutral and set theparking brake. Pull the hoodrelease handle located under thelower left corner of the dashboard.The hood will pop up slightly.

2. Standing in front of the car, putyour fingers under the front edgeof the hood to the right of center.Slide your hand to the left untilyou feel the hood latch handle.Push this handle to the left until it

releases the hood. Lift the hood.

If you can open the hood withoutlifting the hood latch handle, orthe hood latch handle movesstiffly or does not spring back asbefore, the mechanism should becleaned and lubricated (see page174).

Before Driving

RELEASE HANDLE



3. Pull the support rod out of its clipand insert the end into the hole onthe front of the hood around thecenter.To close the hood, lift it up slightlyto remove the support rod fromthe hole. Put the support rod backinto its holding clip. Lower thehood to about a foot (30 cm) abovethe fender, then let it drop.After closing the hood, make sureit is securely latched.

Oil Check

Check the engine oil level every timeyou fill the car with fuel. Wait a fewminutes after turning the engine offbefore you check the oil.

1. Remove the dipstick (blackhandle).

2. Wipe the dipstick with a cleancloth or paper towel.

CONTINUED

Before Driving

DIPSTICK



3. Insert it all the way back in its tube. 4. Remove the dipstick again andcheck the level. It should bebetween the upper and lowermarks.

If it is near or below the lower mark,see Adding Oil on page 157.

Engine Coolant Check

Look at the coolant level in theradiator reserve tank. Make sure it isbetween the MAX and MIN lines. Ifit is below the MIN line, see AddingEngine Coolant on page 161 forinformation on adding the propercoolant.

Refer to Owner MaintenanceChecks on page 155 for informationon checking other items in yourHonda.

Before Driving

UPPER MARK

LOWER MARK


Fuel Economy

The condition of your car and yourdriving habits are the two mostimportant things that affect the fuelmileage you get.

Car ConditionAlways maintain your car accordingto the maintenance schedule. Thiswill keep it in top operating condition.

An important part of that mainte-nance is the Owner MaintenanceChecks (see page 155 ). Forexample, an underinflated tirecauses more "rolling resistance,"which uses fuel. It also wears outfaster, so check the tire pressure atleast monthly.

In winter, the build-up of snow onyour car's underside adds weight androlling resistance. Frequent cleaninghelps your fuel mileage and reducesthe chance of corrosion.

Driving HabitsYou can improve fuel economy bydriving moderately. Rapid acceler-ation, abrupt cornering, and hardbraking use more fuel.

Always drive in the highest gear thatallows the engine to run and acceler-ate smoothly.

Depending on traffic conditions, tryto maintain a constant speed. Everytime you slow down and speed up,your car uses extra fuel. Use thecruise control, when appropriate, toincrease fuel economy.

A cold engine uses more fuel than awarm engine. It is not necessary to"warm-up" a cold engine by letting itidle for a long time. You can driveaway in about a minute, no matterhow cold it is outside. The enginewill warm up faster, and you getbetter fuel economy. To cut down onthe number of "cold starts," try to

combine several short trips into one.

The air conditioning puts an extraload on the engine which makes ituse more fuel. Turn off the A/C tocut down on air conditioning use.Use the flow-through ventilationwhen the outside air temperature ismoderate.

Before Driving


Accessories and Modifications

Modifying your car, or installingsome non-Honda accessories, canmake your car unsafe. Before youmake any modifications or add anyaccessories, be sure to read thefollowing information.

AccessoriesYour dealer has Genuine Hondaaccessories that allow you topersonalize your car. Theseaccessories have been designed andapproved for your car, and arecovered by warranty.

Non-Honda accessories are usuallydesigned for universal applications.Although aftermarket accessoriesmay fit on your car, they may notmeet factory specifications, andcould adversely affect your car'shandling and stability. (See"Modifications" on the page 123 foradditional information.)

When properly installed, cellularphones, alarms, two-way radios, andlow-powered audio systems shouldnot interfere with your car'scomputer-controlled systems, suchas the SRS and anti-lock brakesystem.

However, if electronic accessoriesare improperly installed, or exceedyour car's electrical system capacity,they can interfere with the operationof your car, or even cause theairbags to deploy.

Before installing any accessory:

Make sure the accessory does notobscure any lights, or interferewith proper car operation orperformance.

Be sure electronic accessories donot overload electrical circuits(see page 231).

Have the installer contact yourHonda dealer for assistance beforeinstalling any electronic accessory.

If possible, have your dealer inspectthe final installation.

Before Driving

Improper accessories ormodifications can affect yourcar's handling, stability andperformance, and cause acrash in which you can be hurtor killed.

Follow all instructions in thisowner's manual regardingaccessories and modifications.


Accessories and Modifications

ModificationsDo not remove any originalequipment or modify your car in anyway that would alter its design oroperation. This could make your carunsafe and illegal to drive.

For example, do not make anymodifications that would change theride height of your car, or installwheels and tires with a differentoverall diameter.

Such modifications can adverselyaffect handling, and interfere withthe operation of the car's anti-lockbrakes and other systems.

In addition, any modifications thatdecrease ground clearance increasethe chance of undercarriage partsstriking a curb, speed bump, or otherraised object, which could causeyour airbags to deploy.

Do not modify your steering wheelor any other part of yourSupplemental Restraint System.Modifications could make thesystem ineffective.

Additional Safety PrecautionDo not attach or place objects on theairbag covers. Any object attached toor placed on the covers marked "SRSAIRBAG," in the center of thesteering wheel and on top of thedashboard, could interfere with theproper operation of the airbags. Or,if the airbags inflate, the objectscould be propelled inside the car andhurt someone.

Before Driving


Carrying Cargo

UPPER AND LOWER CONSOLECOMPARTMENTS

TRUNK

Your car has several convenientstorage areas so yon can stow cargosafely.

The upper and lower consolecompartments are designed for small,lightweight items. The trunk isintended for larger, heavier items.

However, carrying too much cargo,or improperly storing it, can affectyour car's handling, stability andoperation and make it unsafe. Beforecarrying any type of cargo, be sure toread the following pages.

Before Driving


Carrying Cargo

Load LimitThe maximum load for your car is400 Ibs (185 kg).

This figure includes the total weightof all occupants, cargo, andaccessories.

To figure out how much cargo youcan carry:

Add up the weight of all occupants.

Subtract the total from 400 Ib (185kg).

The final number is the total weightof cargo you can cany.

Carrying Items in the PassengerCompartment

Store or secure all items that couldbe thrown around and hurtsomeone during a crash.

Be sure items placed on the floorbehind the front scats cannot rollunder the seats and interfere withthe driver's ability to operate thepedals, or with the properoperation of the seats.

Before Driving

Overloading or improperloading can affect handling andstability and cause a crash inwhich you can be hurt or killed.

Follow all load limits and otherloading guidelines in thismanual.


Carrying Cargo

Carrying Cargo in the TrunkDistribute cargo evenly on thefloor of the trunk, placing theheaviest items on the bottom andas far forward as possible.

Before Driving


General Precautions

Your Honda is designed to give youoptimum handling and performanceon well-maintained roads. As part ofthis design, your car has a minimumof ground clearance and very low-profile tires.

Use caution if you should driveyour car on very rough or ruttedroads. You could damage thesuspension and underbody bybottoming out. Going too fast overparking lot "speed bumps" canalso cause damage. Curbs and steep inclines could

damage the front and rearbumpers. Low curbs that do notaffect the average car may be highenough to hit the bumper on yourHonda. The front or rear bumpermay scrape when trying to driveonto an incline, such as a steepdriveway or trailer ramps.

Because of the low-profile tiresfitted to your car, the alloy wheelsare closer to the ground. Drivingover a pothole or road debris attoo high a speed can seriouslydamage a wheel. Slow down underthese conditions.

Before Driving


Driving

This section gives you tips onstarting the engine under variousconditions, and how to operate themanual transmission. It also includesimportant information on parkingyour car, and the braking system.

Preparing to Drive......................... 130Starting the Engine........................ 131

Starting in Cold Weatherat High Altitude..................... 132

6-speed Manual Transmission..... 133Recommended Shift Points...... 134Engine Speed Limiter............... 134Reverse Lockout........................ 134

Parking............................................ 135The Braking System...................... 136

Brake Wear Indicators.............. 136Brake System Design................ 137Anti-lock Brakes........................ 137

Important SafetyReminders.......................... 138

ABS Indicator......................... 139Driving in Bad Weather................ 140Towing a Trailer............................ 141

Driving

Main Menu ▲ ▼

Preparing to Drive

You should do the following checksand adjustments every day beforeyou drive your car.

1. Make sure all windows, mirrors,and outside lights are clean andunobstructed. Remove frost, snow,or ice.

2. Check that the hood and trunk arefully closed.

3. Visually check the tires. If a tirelooks low, use a gauge to check itspressure.

4. Check that any items you may becarrying with you inside are storedproperly or fastened downsecurely.

5. Check the adjustment of the seat(see page 68).

6. Check the adjustment of theinside and outside mirrors (seepage 79).

7. Make sure the doors are securelyclosed and locked.

8. Fasten your seat belt. Check thatyour passenger has fastened hisseat belt (see page 15).

9. Turn the ignition switch ON (II).Check the indicator lights in theinstrument panel.

10. Start the engine (see page 131).

11. Check the gauges and indicatorlights in the instrument panel (seepage 43) .

Driving


Starting the Engine

1. Apply the parking brake.

2. In cold weather, turn off allelectrical accessories to reducethe drain on the battery.

3. Push the clutch pedal down all theway. The ENGINE START buttonhas no effect unless the clutchpedal is depressed.

4. Turn the ignition key to ON (II)position.

ENGINE START BUTTON

5. Without touching the acceleratorpedal, push the ENGINE STARTbutton. If the engine does not startright away, do not hold theENGINE START button for morethan 15 seconds at a time. Pausefor at least 10 seconds beforetrying again.

6. If the engine does not start within15 seconds, or starts but stallsright away, repeat step 5 with theaccelerator pedal pressed half-waydown. If the engine starts, releasepressure on the accelerator pedalso the engine does not race.

7. If the engine still does not start,press the accelerator pedal all theway down and hold it there whilestarting in order to clear flooding.As before, hold the ENGINESTART button for no more than15 seconds. Return to step 6 if theengine does not start. If it starts,lift your foot off the acceleratorpedal so the engine does not race.

Driving


Starting the Engine

Starting in Cold Weather at HighAltitude (Above 8,000 feet/2,400 meters)An engine is harder to start in coldweather. The thinner air found athigh altitude above 8,000 feet (2,400meters) adds to the problem.

Use the following procedure:

1. Turn off all electrical accessoriesto reduce the drain on the battery.

2. Push the accelerator pedal half-way to the floor and hold it therewhile starting the engine. Do nothold the ENGINE START buttonfor more than 15 seconds. Whenthe engine starts, release theaccelerator pedal gradually as theengine speeds up and smooths out.

3. If the engine fails to start in step 2,push the accelerator pedal to thefloor and hold it there while youtry to start the engine for no morethan 15 seconds. If the enginedoes not start, return to step 2.

Driving


6-speed Manual Transmission

The manual transmission is synchro-nized in all forward gears for smoothoperation. It has a lockout so youcannot shift directly from Fifth toReverse instead of sixth (see page134). When shifting up or down,

make sure you push the clutch pedaldown all the way, shift to the nextgear, and let the pedal up gradually.When you are not shifting, do notrest your foot on the clutch pedal.This can cause your clutch to wearout faster.

Come to a full stop before you shiftinto Reverse. You can damage thetransmission by trying to shift intoReverse with the car moving. Pushdown the clutch pedal, and pause fora few seconds before shifting intoReverse, or shift into one of theforward gears for a moment. Thisstops the gears so they won't "grind."

When slowing down, you can getextra braking from the engine byshifting to a lower gear. This extrabraking can help you maintain a safespeed and prevent your brakes fromoverheating while going down asteep hill. Before downshifting,make sure engine speed will not gointo the tachometer's red zone in thelower gear.

Driving

Rapid slowing or speeding-upcan cause loss of control onslippery surfaces. If you crash,you can be injured.

Use extra care when driving onslippery surfaces.


6-speed Manual Transmission

Recommended Shift PointsDrive in the highest gear that letsthe engine run and acceleratesmoothly. This will give you the bestfuel economy and effective emis-sions control. The following shiftpoints are recommended:

Engine Speed LimiterIf you exceed the maximum speedfor the gear you are in, the enginespeed will enter into the tachometer'sred zone. If this occurs, you may feelthe engine cut in and out. This iscaused by a limiter in the engine'scomputer controls. The engine willrun normally when you reduce theRPM below the red zone.

Before downshifting, make sure theengine will not go into thetachometer's red zone in the lowergear.

Reverse Lockout

The 6-speed manual transmissionhas a lockout so you cannotaccidentally shift from Fifth toReverse instead of Sixth.

With the clutch pedal depressed,move the shift lever to the Reverseside of the Neutral gate, then pushthe shift lever down and shift toReverse.

Driving


Parking

Always use the parking brake whenyou park your car. The indicator onthe instrument panel shows that theparking brake is not fully released; itdoes not indicate that the parkingbrake is firmly set. Make sure theparking brake is set firmly or yourcar may roll if it is parked on anincline.

If the car is facing uphill, turn thefront wheels away from the curb andput the transmission in first gear.If the car is facing downhill, turn thefront wheels toward the curb and putthe transmission in reverse gear.

Make sure the parking brake is fullyreleased before driving away.Driving with the parking brakepartially set can overheat or damagethe rear brakes.

Parking TipsMake sure the convertible top andthe windows are closed.

Turn off the lights.

Place any packages, valuables, etc.,in the trunk or take them with you.

Lock the doors with the key or theremote transmitter.

Never park over dry leaves, tallgrass, or other flammablematerials. The three way catalyticconverter gets very hot, and couldcause these materials to catch onfire.

Driving


The Braking System

Your Honda is equipped with disc-brakes at all four wheels. A powerassist helps reduce the effort neededon the brake pedal. The ABS helpsyou retain steering control whenbraking very hard.

Put your foot on the brake pedal onlywhen you intend to brake. Restingyour foot on the pedal keeps thebrakes applied lightly, causing themto build up heat. Heat build-up canreduce how well your brakes work. Italso keeps your brake lights on allthe time, confusing drivers behindyou.

Constant application of the brakeswhen going down a long hill buildsup heat and reduces their effective-ness. Use the engine to assist thebrakes by downshifting to a lowergear and taking your foot off theaccelerator pedal.

Check your brakes after drivingthrough deep water. Apply thebrakes moderately to see if they feelnormal. If not, apply them gently andfrequently until they do. Since alonger distance is needed to stopwith wet brakes, be extra cautiousand alert in your driving.

Brake Wear IndicatorsAll four brakes have audible brakewear indicators.When the brake pads need replacing,you will hear a distinctive metallic"screeching" sound when you applythe brakes. If you do not have thebrake pads replaced, they will beginscreeching all the time.

Your brakes may sometimes squealor squeak when you apply themlightly. Do not confuse this with thebrake wear indicators. They make avery audible "screeching."

Driving


The Braking System

Brake System DesignThe hydraulic system that operatesthe brakes has two separate circuits.Each circuit works diagonally acrossthe car (the left-front brake isconnected with the right-rear brake,etc.). If one circuit should develop aproblem, you will still have brakingat two wheels.

Anti-lock BrakesYour car has an Anti-lock BrakeSystem (ABS) as standardequipment. ABS helps to prevent thewheels from locking up and skiddingduring hard braking, allowing you toretain steering control.

When the front tires skid, you losesteering control; the car continuesstraight ahead even though you turnthe steering wheel. The ABS helps toprevent lock-up and helps you retainsteering control by pumping thebrakes rapidly; much faster than aperson can do it.

CONTINUED

Driving

Front


The Braking System

You should never pump thebrake pedal, this defeats thepurpose of the ABS. Let the ABSwork for you by always keeping firm,steady pressure on the brake pedalas you steer away from the hazard.This is sometimes referred to as"stomp find steer."

You will feel a pulsation in the brakepedal when the ABS activates, andyou may hear some noise. This isnormal, it is the ABS rapidlypumping the brakes.

Activation varies with the amount oftraction your tires have. On drypavement, you will need to press onthe brake pedal very hard before youactivate the ABS. However, you mayfeel the ABS activate immediately ifyou are trying to stop on snow or ice.

Important Safety RemindersABS does not reduce the time ordistance it takes to stop the car, itonly helps with steering controlduring braking. You should alwaysmaintain a safe following distancefrom other vehicles.

ABS will not prevent a skid thatresults from changing directionabruptly, such as trying to take acorner too fast or making a suddenlane change. Always drive at a safe,prudent speed for the road andweather conditions.

ABS cannot prevent a loss ofstability. Always steer moderatelywhen you are braking hard. Severeor sharp steering wheel movementcan still cause your car to veer intooncoming traffic or off the road.

A car with ABS may require alonger distance to stop on loose oruneven surfaces, such as gravel orsnow, than a car without anti-lock.Slow down and allow a greaterdistance between cars under thoseconditions.

Driving


ABS Indicator

U.S. indicator shown

The ABS is self-checking. If anythinggoes wrong, the ABS indicator onthe instrument panel comes on (seepage 45). This means the anti-lockfunction of the braking system hasshut down. The brakes still work likea conventional system without anti-lock, providing normal stoppingability. You should have the dealerinspect your car as soon as possible.

The Braking System

Driving

ANTI-LOCK BRAKE SYSTEMINDICATOR


Driving in Bad Weather

Rain, fog, and snow conditions re-quire a different driving techniquebecause of reduced traction andvisibility. Keep your car well-maintained and exercise greatercaution when you need to drive inbad weather. The cruise controlshould not be used in these condi-tions.

Driving Technique — Always driveslower than you would in dryweather. It takes your car longer toreact, even in conditions that mayseem just barely clamp. Applysmooth, even pressure to all thecontrols. Abrupt steering wheelmovements or sudden, hard appli-cation of the brakes can cause loss ofcontrol in wet weather. Be extracautious for the first few miles(kilometers) of driving while youadjust to the change in drivingconditions. This is especially true insnow. A person can forget somesnow-driving techniques during thesummer months. Practice is neededto relearn those skills.

Exercise extra caution when drivingin rain after a long dry spell. Aftermonths of dry weather, the firstrains bring oil to the surface of theroadway, making it slippery.

Visibility — Being able to seeclearly in all directions and beingvisible to other drivers are importantin all weather conditions. This ismore difficult in bad weather. To beseen more clearly during daylighthours, turn on your headlights.

Inspect your windshield wipers andwashers frequently. Keep the wind-shield washer reservoir full of theproper fluid. Have the windshieldwiper blades replaced if they start tostreak the windshield or leave partsunwiped. Use the defrosters and airconditioning to keep the windowsfrom fogging up on the inside (seepage 91).

Driving


Driving in Bad Weather, Towing a Trailer

Traction — Check your tiresfrequently for wear and properpressure. Both are important inpreventing "hydroplaning" (loss oftraction on a wet surface). In thewinter, mount snow tires on all fourwheels for the best handling.

Watch road conditions carefully,they can change from moment tomoment. Wet leaves can be as slip-pery as ice. "Clear" roads can havepatches of ice. Driving conditionscan be very hazardous when theoutside temperature is near freezing.The road surface can becomecovered with areas of water puddlesmixed with areas of ice, so yourtraction can change without warning.

Be careful when downshifting. Iftraction is low, you can lock up thedrive wheels for a moment and causea skid.

Be very cautious when passing, orbeing passed by other cars. Thespray from large cars reduces yourvisibility, and the wind buffeting cancause you to lose control.

Towing a TrailerYour car is not designed to tow atrailer. Attempting to do so can voidyour warranties.

Driving


Maintenance

This section explains why it isimportant to keep your car wellmaintained and to follow basicmaintenance safety precautions.

This section also includesMaintenance Schedules for normaldriving and severe driving conditions,a Maintenance Record, and instruc-tions for simple maintenance tasksyou may want to take care ofyourself.

If you have the skills and tools to per-form more complex maintenancetasks on your Honda, you may wantto purchase the Service Manual. Seepage 259 for information on how toobtain a copy, or see your Hondadealer.

Maintenance Safety....................... 144Important Safety Precautions.. 145

Maintenance Schedule.................. 146Required Maintenance Record.... 153Owner Maintenance Checks........ 155Fluid Locations............................... 156Engine Oil....................................... 157

Adding Oil................................... 157Recommended Oil..................... 157Synthetic Oil............................... 158Additives..................................... 158Changing the Oil and Filter...... 159

Cooling System.............................. 161Adding Engine Coolant............. 161Replacing Engine Coolant........ 163

Windshield Washers..................... 1676-speed Manual Transmission

Fluid............................................ 168Differential Fluid........................... 169Brake and Clutch Fluid................. 170

Brake Fluid................................. 170Brake System............................. 170Clutch System............................ 171

Air Cleaner Element...................... 172Hood Latch..................................... 174

Spark Plugs..................................... 174Replacement............................... 174Specifications............................. 176

Battery............................................ 177Wiper Blades.................................. 180Air Conditioning System............... 182Air Conditioning Filter.................. 183Drive Belt........................................ 184Tires................................................ 185

Inflation....................................... 185Inspection................................... 187Maintenance............................... 188Tire Rotation.............................. 188Tire Wear.................................... 188Replacing Tires and Wheels .... 189Wheels and Tires....................... 190Winter Driving........................... 190

Snow Tires.............................. 191Tire Chains............................. 191

Lights.............................................. 192Replacing Bulbs......................... 194

Storing Your Car............................ 202

Maintenance

Main Menu ▲ ▼

Maintenance Safety

Regularly maintaining your car is thebest way to protect your investment.Proper maintenance is essential toyour safety and the safety of yourpassengers. It will also reward youwith more economical, trouble-freedriving and help reduce air pollution.

This section includes instructions forsimple maintenance tasks, such aschecking and adding oil. Any serviceitems not detailed in this sectionshould be performed by a Hondatechnician or other qualifiedmechanic.

Some of the most important safetyprecautions are given here. However,we cannot warn you of everyconceivable hazard that can arise inperforming maintenance. Only youcan decide whether or not youshould perform a given task.

Maintenance

Failure to properly followmaintenance instructions andprecautions can cause you tobe seriously hurt or killed.

Always follow the proceduresand precautions in this owner'smanual.

Improperly maintaining this caror failing to correct a problembefore driving can cause acrash in which you can beseriously hurt or killed.

Always follow the inspectionand maintenancerecommendations andschedules in this owner'smanual.


Maintenance Safety

Important Safety PrecautionsBefore you begin any maintenance,make sure your car is parked onlevel ground and that the parkingbrake is set. Also, be sure the engineis off. This will help to eliminateseveral potential hazards:

Carbon monoxide poisoningfrom engine exhaust. Be surethere is adequate ventilationwhenever you operate the engine.

Burns from hot parts. Let theengine and exhaust system coolbefore touching any parts.

Injury from moving parts. Donot run the engine unless in-structed to do so.

Read the instructions before youbegin, and make sure you have thetools and skills required.

To reduce the possibility of fire orexplosion, be careful when workingaround gasoline or batteries. Use acommercially available degreaser orparts cleaner, not gasoline, to cleanparts. Keep cigarettes, sparks, andflames away from the battery and allfuel-related parts.

You should wear eye protection andprotective clothing when workingnear the battery or when usingcompressed air.

Maintenance


Maintenance Schedule

The Maintenance Schedule specifieshow often you should have your carserviced and what things needattention. It is essential that you haveyour car serviced as scheduled toretain its high level of safety,dependability, and emissions controlperformance.

The services and time or distanceintervals shown in the maintenanceschedule assume you will use yourcar as normal transportation for yourpassenger and possessions. Youshould also follow theserecommendations:

Avoid exceeding your car's loadlimit. This puts excess stress onthe engine, brakes, and manyother parts of your car. The loadlimit is shown on the label on thedriver's doorjamb.

Operate your car on reasonableroads within the legal speed limit.

Drive your car regularly over adistance of several miles(kilometers).

Always use unleaded gasoline withthe proper octane rating (see page116).

Which Schedule to Follow:Service your car according to thetime and mileage periods on one ofthe Maintenance Schedules on thefollowing pages. Select the schedulefor "Severe Conditions" if most ofyour driving is done under one ormore of the conditions listed on thatpage. Otherwise, follow the schedulefor "Normal Conditions."

Maintenance


Maintenance Schedule

Your authorized Honda dealerknows your car best and can providecompetent, efficient service.However, service at a dealer is notmandatory to keep your warrantiesin effect. Maintenance may be doneby any qualified service facility orperson who is skilled in this type ofautomotive service. Keep all thereceipts as proof of completion, andhave the person who does the workfill out the Maintenance Record.Check your warranty booklet formore information.

We recommend the use of GenuineHonda parts and fluids whenever youhave maintenance done. These aremanufactured to the same high-quality standards as the originalcomponents, so you can be confidentof their performance and durability.

U.S. Cars:Maintenance, replacement orrepair of emissions controldevices and systems may be doneby any automotive repairestablishment or individual usingparts that are "certified" to EPAstandards.

According to state and federalregulations, failure to performmaintenance on the items markedwith # will not void your emissionswarranties. However, Hondarecommends that all maintenanceservices be performed at therecommended time or mileageperiod to ensure long-term reliability.

Maintenance


U.S. OwnersFollow the Normal ConditionsMaintenance Schedule if thesevere driving conditionsspecified in the SevereConditions MaintenanceSchedule do not apply.

NOTE: If yon onlyOCCASIONALLY drive under a"severe" condition, you shouldfollow the Normal ConditionsMaintenance Schedule.

Canadian OwnersFollow the MaintenanceSchedule for Severe Conditions.

#: See information on maintenance and

emissions warranty, last column, page 147 .

Maintenance


Service at the indicated distance or time, whichever comes first. Do the items in A, B, C as required for each distance/time interval. Follow thisschedule if the severe driving conditions described in the Severe Conditions Schedule on the next page do not apply.Canadian owners: Follow the schedule for Severe Conditions.

Note:Check engine oil and coolant at each fuel stop.Check and adjust valve clearance, cold engine, if noisy.

Maintenance

# : See information on maintenance and emissions warranty, last

column, page 147.


* 1 : Refer to page 183 for replacement information under special driving conditions.

U.S. OwnersFollow the Severe ConditionsMaintenance Schedule if youdrive your vehicle MAINLYunder one or more of thefollowing conditions:

Driving less than 5 miles (8km) per trip or, in freezingtemperatures, driving lessthan 10 miles (16 km) per trip.Driving in extremely hot[over 90°F (32°C)] conditions.Extensive idling or longperiods of stop-and-go driving.Driving in mountainousconditions.Driving on muddy, dusty, orde-iced roads.

Canadian OwnersFollow the MaintenanceSchedule for Severe Conditions.

#: See information on maintenance and

emissions warranty, last column, page 147 .

Maintenance


Use this schedule if your vehicle is MAINLY driven in any of the following Severe Conditions, or normally driven in Canada; otherwise use the NormalSchedule. Service at the indicated distance or time, whichever comes first. Do the items in A, B, C, D as required for each distance/time.

Note:Check engine oil and coolant at each fuel stop.Check and adjust valve clearance, cold engine, if noisy.

CONTINUED

Maintenance


Maintenance

page 147


Required Maintenance Record (for Normal and Severe Schedules)

CONTINUED

You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 148 ) or severeconditions (page 150 ). Keep the receipts for all work done on your vehicle.

Maintenance


Required Maintenance Record (for Normal and Severe Schedules)

Maintenance


Owner Maintenance Checks

You should check the followingitems at the specified intervals. Ifyou are unsure of how to performany check, turn to the page given.

Engine oil level — Check everytime you fill the fuel tank. Seepage 119.

Engine coolant level - Check theradiator reserve tank every timeyou fill the fuel tank. See page 120.

Windshield washer fluid — Checkthe level in the reservoir monthly.If weather conditions cause you touse the washers frequently, checkthe reservoir each time you stopfor fuel. See page 167.

Brakes and clutch — Check thefluid level monthly. See page 170 .

Tires — Check the tire pressuremonthly. Examine the tread forwear and foreign objects. See page186.

Lights — Check the operation ofthe headlights, parking lights,taillights, high-mount brake light,turn signals, brake lights, andlicense plate lights monthly. Seepage 192.

Maintenance


Fluid Locations

Maintenance

COOLANT RESERVOIR

CLUTCH FLUID(Gray cap)

BRAKE FLUID(Gray cap)

ENGINE OIL FILL CAP

WASHER FLUID(Blue cap)

ENGINE OIL DIPSTICK


Engine Oil

Adding Oil

To add oil, unscrew and remove theengine oil fill cap on lop of the leftvalve cover. Pour in the oil, andreplace the engine oil fill cap.Tighten it securely. Wait a fewminutes and recheck the oil level. Donot fill ahove the upper mark; youcould damage the engine.

Recommended OilOil is a major contributor to yourengine's performance and longevity.Always use a premium-grade deter-gent oil. It is highly recommendedthat you use Genuine Honda Motoroil in your vehicle for as long as youown it.

You can determine an oil's SAEviscosity and Service Classificationfrom the API Service label on the oilcontainer.

A fuel-efficient oil is recommendedfor your Honda. This is shown on theAPI Service label by the words"Energy Conserving." This oil isformulated to help your engine useless fuel.

The API Service label also tells youthe service classification of the oil.Always use an oil that is labeled "APIService SJ." This service rating mayinclude other classifications, such asCD. These additional classificationsare not a problem, as long as thelabel also carries the SJ classification.

API SERVICE LABEL

CONTINUED

Maintenance


Engine Oil

The oil container may also displaythe API Certification seal. Make sureit says "For Gasoline Engines."

API CERTIFICATION SEAL

The SAE numbers tell you the oil'sviscosity or weight. Select the oil foryour car according to this chart.

Ambient Temperature

An oil with a viscosity of 10W-30 ispreferred for improved fuel economyand year-round protection in yourHonda. You may use a 5W-40 oil ifthe temperature in your area goesbelow 0°F(—20°C).

Synthetic OilYou may use a synthetic motor oil ifit meets the same requirementsgiven for conventional motor oil:energy conserving, a serviceclassification of SJ, and the properweight as shown on the chart. Whenusing synthetic oil, you must followthe oil and filter change intervalsgiven in the maintenance schedule.

AdditivesYour Honda does not need any oiladditives. Purchasing additives forthe engine or transmission will notincrease your car's performance orlongevity. It only increases the costof operating your car.

Maintenance


Engine Oil

Changing the Oil and FilterAlways change the oil and filteraccording to the time and distance(miles/kilometers) recommenda-tions in the maintenance schedule.The oil and filter collect contami-nants that can damage your engine ifthey are not removed regularly.

Changing the oil and filter requiresspecial tools and access fromunderneath the car. The car shouldbe raised on a service station-typehydraulic lift for this service. Unlessyou have the knowledge and properequipment, you should have thismaintenance done by a skilledmechanic.

1. Run the engine until it reachesnormal operating temperature,then shut it off.

2. Remove the engine oil f i l l cap.Remove the oil drain bolt from thebottom of the engine. Drain the oilinto an appropriate container.

3. Remove the oil filter and let theremaining oil drain. A specialwrench (available from yourHonda dealer) is required toremove the filter.

4. Install a new oil filter according toinstructions that come with it.

Maintenance

CONTINUED

OIL FILTEROIL DRAIN BOLTWASHER


Engine Oil

5. Put a new washer on the drain bolt,then reinstall the drain bolt.Tighten it to:33 lbf.ft (45 N.m,4.6 kgf.m)

6. Refill the engine with the recom-mended oil.Engine oil change capacity(including filter):5.1 US qt (4.8 ,4.2 Imp qt)

7. Install the engine oil fill cap. Startthe engine. The oil pressureindicator light should go out withinfive seconds. If it does not, turn offthe engine and reinspect yourwork.

8. Let the engine run for severalminutes and check the drain boltand oil filter for leaks.

9. Turn off the engine, let it sit forseveral minutes, then check the oillevel. If necessary, add oil to bringthe level to the upper mark on thedipstick.

Improper disposal of engine oil can beharmful to the environment. If yonchange your own oil, please dispose ofthe used oil properly. Put it in a sealedcontainer and take it to a recyclingcenter. Do not discard it in a trash binor dump it on the ground.

Maintenance

NOTICE


Cooling System

Adding Engine Coolant

If the coolant level in the reservetank is at or below the MIN line, addcoolant to bring it up to the MAX line.Inspect the cooling system for leaks.This coolant should always be amixture of 50 percent antifreeze and50 percent water. Never add straightantifreeze or plain water.

Always use Genuine HondaAntifreeze/Coolant. If it is notavailable, you may use anothermajor-brand non-silicate coolant as atemporary replacement. Make sure itis a high-quality coolantrecommended for aluminum engines.However, continued use of any non-Honda coolant can result incorrosion, causing the coolingsystem to malfunction or fail. Havethe cooling system flushed andrefilled with Honda antifreeze/coolant as soon as possible.

If the reserve tank is completelyempty, you should also check thecoolant level in the radiator.

1. Make sure the engine and radiatorare cool.

CONTINUED

Maintenance

RESERVE TANK

MAX MIN

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.


Cooling System

2. Turn the radiator cap counter-clockwise, without pressing downon it, until it stops. This relievesany pressure remaining in thecooling system.

3. Remove the radiator cap bypushing down and turningcounterclockwise.

4. The coolant level should be up tothe base of the filler neck. Addcoolant if it is low.

5. Put the radiator cap back on.Tighten it fully.

6. Pour coolant into the reserve tank.Fill it to halfway between the MAXand MIN marks. Put the cap backon the reserve tank.

Do not add any rust inhibitors orother additives to your vehicle'scooling system. They may not becompatible with the coolant orengine components.

Maintenance

RESERVE TANKRADIATOR CAP


Cooling System

Replacing Engine CoolantThe cooling system should becompletely drained and refilled withnew coolant according to the timeand distance recommendations inthe maintenance schedule. Only useGenuine Honda Antifreeze/Coolant.

Draining the coolant requires accessto the underside of the vehicle.Unless you have the tools andknowledge, you should have thismaintenance done by a skilledmechanic. 1. Turn the ignition ON (II). Turn

the heater temperature controldial fully clockwise. Turn theignition off.

2. Open the hood. Make sure theengine and radiator are cool to thetouch.

3. Remove the radiator cap.

DRAIN BOLT

4. Loosen the drain plug on thebottom of the radiator. Thecoolant will drain through thesplash guard. Remove the drainbolt and washer from the engineblock.

CONTINUED

Maintenance

DRAIN PLUG


Cooling System

5. Remove the reserve tank from itsholder by pulling it straight up.Drain the coolant, then put thetank back in its holder.

6. When the coolant stops draining,tighten the drain plug at thebottom of the radiator.Apply non-hardening sealant to thedrain bolt threads, put a newwasher on the drain bolt, andreinstall the bolt in the engineblock. Tighten it securely.Tightening torque:61 lbf.ft(83 N.m , 8.5 kgf.m)

7. Mix the recommended antifreezewith an equal amount of purifiedor distilled water in a cleancontainer. The cooling systemcapacity is:1.72 US gal (6.5 , 1.43 Imp gal)

8. Loosen the bleeder bolt on top ofthe engine, and remove thebleeder cap near the engine oil fillcap. Pour coolant into the radiatorup to the base of the filler neck.Tighten the bleeder bolt andreinstall the bleeder cap whencoolant comes out in a steadystream with no bubbles.

Maintenance

BLEEDER BOLTRESERVE TANK CAP

HOLDER RESERVE TANK


Cooling System

9. Start the engine and let it run forabout 30 seconds. Then turn offthe engine.

10. Pour coolant into the radiator upto the base of the filler neck.

11. Fill the reserve tank to the MAXmark. Install the reserve tank cap.

12. Install the radiator cap, andtighten it to the first stop.

13. Start the engine and let it run untilthe radiator fan comes on twotimes. Then stop the engine.

Maintenance

BLEEDER CAP

CONTINUED

Fill up to here

FILLER NECK

RESERVE TANK


Cooling System

14. Remove the radiator cap.

15. Pour coolant into the radiator upto the base of the filler neck andinto the reserve tank up to theMAX mark.

16. Start the engine and hold it at1,500 rpm until the radiator fancomes on. Turn off the engine.Check the coolant level in theradiator and add coolant if needed.

17. Install the radiator cap, andtighten it fully.

18. If necessary, fill the reserve tankto the MAX mark. Install thereserve tank cap.

Maintenance


Windshield Washers

RESERVOIR CAP

Check the level in the windshieldwasher reservoir at least monthlyduring normal usage. In bad weather,when you use the washers often,check the level every time you stopfor fuel.

The windshield washer reservoir islocated in the rear of the enginecompartment on the passenger's side.

Check the reservoir's fluid level byremoving the cap and looking at thelevel gauge attached to the cap.

Fill the reservoir with a good-qualitywindshield washer fluid. Thisincreases the cleaning capability andprevents freezing in cold weather.

When you refill the reservoir, cleanthe edges of the windshield wiperblades with windshield washer fluidon a clean cloth. This will help tocondition the blade edges.

Maintenance

NOTICE

Do not use engine antifreeze or avinegar/water solution in thewindshield washer reservoir.

Antifreeze can damage your car's paint,while a vinegar/water solution candamage the windshield washer pump.

Use only eommereially-evailablewindshield washer fluid.


6-speed Manual Transmission Fluid

FILLER BOLT

Check the fluid level with thetransmission at normal operatingtemperature and the car sitting onlevel ground. Remove thetransmission filler bolt and carefullyfeel inside the bolt hole with yourfinger. The fluid level should be upto the edge of the bolt hole. If it isnot, add Genuine Honda ManualTransmission Fluid (MTF) until itstarts to run out of the hole. Reinstallthe filler bolt and tighten it securely.

If Honda MTF is not available, youmay use an API service SG, SH or SJgrade motor oil with a viscosity ofSAE 10W-30 or 10W-40 as atemporary replacement. An SGgrade is preferred, but an SH or SJgrade may be used if SG is notavailable. However, motor oil doesnot contain the proper additives andcontinued use can cause stiffershifting. Replace as soon asconvenient.

The transmission should be drainedand refilled with new fluid accordingto the time and distance recommen-dations in the maintenance schedule.

Maintenance

CORRECT LEVEL


Differential Fluid

FILLER BOLT

CORRECT LEVEL

Check the fluid level with thedifferential at normal operatingtemperature and the vehicle sittingon level ground. Remove thedifferential fluid filler boll andwasher and carefully feel inside thebolt hole with your finger. The fluidlevel should be up to the edge of thebolt hole. If it is not, slowly add fluiduntil it starts to run out of the hole.

Use a SAE 90 viscosity hypoid gearoil, API service classified GL5 orGL6 only, in the differential.

Put a new washer on the filler bolt,then reinstall the filler bolt. Tightenit securely. Tightening torque:33 lbf.ft (45 N.m , 4.6 kgf.m)

The differential should be drainedand refilled with new fluid accordingto the time and distancerecommendations in themaintenance schedule.

Maintenance


Brake and Clutch Fluid

Check the fluid level in the reser-voirs monthly. There are two reser-voirs. They are:

Brake fluid reservoirClutch fluid reservoir

The brake fluid should be replacedaccording to the time and distancerecommendations in the mainte-nance schedule.

Brake FluidAlways use Genuine Honda DOT 3brake fluid. If it is not available, youshould use only DOT 3 or DOT 4fluid, from a sealed container, as atemporary replacement. However,the use of any non-Honda brake fluidcan cause corrosion and decreasethe life of the system. Have thebrake system flushed and refilledwith Honda DOT 3 brake fluid assoon as possible.

Brake fluid marked DOT 5 is notcompatible with your car's brakingsystem and can cause extensivedamage.

Brake System

MIN

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If the level is at orbelow the MIN mark, your brakesystem needs attention. Have thebrake system inspected for leaks orworn brake pads.

Maintenance

MAX


Clutch Fluid

Maintenance

Clutch System

MAX

MIN

The fluid should be between theMIN and MAX marks on the side ofthe reservoir. If it is not, add brakefluid to bring it up to that level. Usethe same fluid specified for thebrake system.

Low fluid level can indicate a leak inthe clutch system. Have this systeminspected as soon as possible.


Air Cleaner Element

The air cleaner element should bereplaced according to the time anddistance recommendations in themaintenance schedule.

Follow the replacement procedurefor removal and reinstallation.

Replacement

To replace it:

1. Unsnap the six clamps holding theair cleaner housing cover.

2. Remove the air cleaner housingcover. Disconnect the air intakeduct from the air cleaner element.

AIR CLEANER ELEMENT

3. Remove the old air cleanerelement.

4. Carefully clean the inside of theair cleaner housing with a damprag.

Maintenance

CLAMPS


5. Attach the new air cleanerelement to the duct. Install thenew air cleaner element in the aircleaner housing. Make sure thepin on the edge of the element fitsin the hole in the bottom of thehousing.

6. Reinstall the air cleaner housingcover, snap the six clamps backinto place.

Air Cleaner Element

Maintenance


Hood Latch, Spark Plugs

Hood Latch

Clean the hood latch assembly with amild cleaner, then lubricate it with amultipurpose grease. Lubricate allthe moving parts, including the pivot.Follow the time and distancerecommendations in theMaintenance Schedule. If you arenot sure how to clean and grease thelatch, contact your Honda dealer.

Spark PlugsThe spark plugs in your car are aspecial platinum-tipped design forlonger life. They only need to bereplaced every 7 years or 105,000miles (168,000 km), whichevercomes first.

Replacement

1. Remove the four hexagon sockethead cap bolts holding the ignitioncoil cover.

2. Clean up any dirt and oil that havecollected around the ignition coils.

Maintenance

PIVOTS


Spark Plugs

3. Remove the bolt holding theignition coil and pull the ignitioncoil straight up slightly.Disconnect the ignition coilconnector by pushing the tab andpulling the connector back.Pull the ignition coil all the way up.

4. Remove the spark plug witha five-eighths inch (16 mm) sparkplug socket.

5. Put the new spark plug into thesocket; then screw it into the hole.Screw it in by hand so you do notcrossthread it.

6. Torque the spark plug. (If you donot have a torque wrench, tightenthe spark plug two-thirds of a turnafter it contacts the cylinder head.)Tightening torque:

18 lbf.ft (25 N.m, 2.5 kgf.m)

CONTINUED

Maintenance


Spark Plugs

Tighten the spark plugs carefully. Aspark plug that is too loose canoverheat and damage the engine.Overtightening can cause damage tothe threads in the cylinder head.

7. Install the ignition coil. Reinstallthe bolt.

8. Repeat this procedure for theother three spark plugs.

9. Reinstall the cover on the cylinderbank. Reinstall the four hexagonsocket head cap bolts.

Specifications:

NGK: PFR7G-11SDENSO: PK22PR-L11S

Spark Plug Gap:0.043 in (1.1 mm

Maintenance

NOTICE


Battery

Check the condition of your car'sbattery monthly. You should checkthe color of the test indicator window,and for corrosion on the terminals.

Check the battery condition bylooking at the test indicator windowon the battery.The label on the battery explains thetest indicator's colors.

Check the battery terminals forcorrosion (a white or yellowishpowder). To remove it, cover theterminals with a solution of bakingsoda and water. It will bubble up andturn brown. When this stops, wash itoff with plain water. Dry off thebattery with a cloth or paper towel.Coat the terminals with grease tohelp prevent future corrosion.

CONTINUED

Maintenance

TEST INDICATOR WINDOW


Battery

If the terminals are severely cor-roded, clean them with baking sodaand water. Then use a wrench toloosen and remove the cables fromthe terminals. Always disconnect thenegative (—) cable first and recon-nect it last. Clean the battery termi-nals with a terminal cleaning tool orwire brush. Reconnect and tightenthe cables, then coat the terminalswith grease.

If you need to connect the battery toa charger, disconnect both cables toprevent damage to the car'selectrical system.

Maintenance

The battery gives off explosivehydrogen gas during normaloperation.

A spark or flame can cause thebattery to explode with enoughforce to kill or seriously hurt you.

Wear protective clothing and aface shield, or have a skilledmechanic do the batterymaintenance.


Battery

If your car's battery is disconnectedor goes dead, the audio system willdisable itself. The next time you turnon the radio you will see "Code" inthe frequency display. Use thePreset buttons to enter the five-digitcode (see page 113).

Charging the battery with the cablesconnected can seriously damage yourcar's electronic controls. Detach thebattery cables before connecting thebattery to a charger.

Maintenance

NOTICE


Wiper Blades

Check the condition of the wiperblades at least every six months.Look for signs of cracking in therubber, or areas that are gettinghard. Replace the blades if you findthese signs, or they leave streaksand unwiped areas when used.

To replace the blade:

1. Raise the wiper arm off thewindshield.

LOCK TAB

2. Disconnect the blade assemblyfrom the wiper arm by pushing inthe lock tab. Hold it in while youpush the blade assembly towardthe base of the arm.

Maintenance


Wiper Blades

3. Remove the blade from its holderby grasping the tabbed end of theblade. Pull firmly until the labscome out of the holder.

BLADE

REINFORCEMENT

4. Examine the new wiper blades. Ifthey have no plastic or metal rein-forcement along the back edge,remove the metal reinforcementstrips from the old wiper blade andinstall them in the slots along theedge of the new blade.

5. Slide the new wiper blade into theholder until the tabs lock.

6. Slide the wiper blade assemblyonto the wiper arm. Make sure itlocks in place.

7. Lower the wiper arm down againstthe windshield.

Maintenance


Air Conditioning System

Your car's air conditioning is a sealedsystem. Any major maintenance,such as recharging, should be doneby a qualified mechanic. You can doa couple of things to make sure theair conditioning works efficiently.

Periodically check the engine'sradiator and air conditioningcondenser for leaves, insects, anddirt stuck to the front surface. Theseblock the air flow and reduce coolingefficiency. Use a light spray from ahose or a soft brush to remove them.

The condenser and radiator fins bendeasily. Only use a low-pressure sprayor soft-bristle brush to clean them.

Run the air conditioning at least oncea week during the cold weathermonths. Run it for at least tenminutes while you are driving at asteady speed with the engine atnormal operating temperature. Thiscirculates the lubricating oil con-tained in the refrigerant.

If the air conditioning does not get ascold as before, have your dealercheck the system. Recharge thesystem with Refrigerant HFC-134a(R-134a). (See Specifications on page245.)

Whenever you have the air conditioningsystem serviced, make sure the servicefacility uses a refrigerant recyclingsystem. This system captures therefrigerant for reuse. Releasingrefrigerant into the atmosphere candamage the environment.

Maintenance

AIR CONDITIONING CONDENSER

NOTICE

NOTICE


Air Conditioning Filter

The air conditioning filter removespollen and dust from outside air theheating and cooling system bringsinto the interior. It should bereplaced according to the time anddistance recommendations in themaintenance schedule.

This filter should be replaced every30,000 miles (48,000 km) undernormal conditions. It should bereplaced every 15,000 miles (24,000km) if you drive primarily in urbanareas that have high concentrationsof soot in the air from industry anddiesel-powered vehicles. Replace itmore often if air flow from theclimate control system becomes lessthan usual. Have the air conditioningfilter replaced by your Honda dealer.

Replacement

The air conditioning filter is locatedin the engine compartment on thepassenger's side near the base of thewindshield.

1. Open the hood. Unclip thewindshield base by pulling it up.

2. Push the tab on the airconditioning filter to unlock itfrom the holder.

3. Remove the old filter. Put a newfilter in the holder and push it inuntil it locks.

4. Put the pins on the windshieldbase into their mating holes on thesupport, and push the base downuntil the pins snap in.

Maintenance


Drive Belt

You should check the condition ofthe drive belt every 2 years. Examinethe edges of belt for cracks orfraying.

Auto-tensioner

An auto-tensioner adjusts the tensionof the drive belt.The pointer on the auto-tensionershould be between the two lines ofthe indicator. If the pointer is notbetween the lines, contact yourHonda dealer.

Maintenance

INDICATOR AUTO-TENSIONER

POINTER


Tires

To safely operate your car, your tiresmust be the proper type and size, ingood condition with adequate tread,and correctly inflated. The followingpages give more detailed informationon how and when to check airpressure, how to inspect your tiresfor damage and wear, and what to dowhen your tires need to be replaced.

InflationKeeping the tires properly inflatedprovides the best combination ofhandling, tread life and ridingcomfort. Underinflated tires wearunevenly, adversely affect handlingand fuel economy, and are morelikely to fail from being overheated.Overinflated tires can make your carride more harshly, are more prone todamage from road hazards, and wearunevenly.

We recommend that you visuallycheck your tires every day. If youthink a tire might be low, check itimmediately with a tire gauge.

COUNTINUED

Maintenance

Using tires that are excessivelyworn or improperly inflated cancause a crash in which you canbe seriously hurt or killed.

Follow all instructions in thisowner's manual regarding tireinflation and maintenance.


Tires

Use a gauge to measure the airpressure at least once a month. Eventires that are in good condition maylose one to two psi (10 to 20 kPa, 0.1to 0.2 kgf/cm2) per month.Remember to check the spare tire atthe same time you check all theother tires.

Check the pressure in the tires whenthey are cold. This means the carhas been parked for at least threehours. If you have to drive the carbefore checking the tire pressure,the tires can still be considered"cold" if you drive less than 1 mile(1.6 km).

If you check the pressure when thetires are hot (the car has been drivenseveral miles), you will see readings4 to 6 psi (30 to 40 kPa, 0.3 to 0.4kgf/cm2) higher than the coldreading. This is normal. Do not letair out to match the specified coldpressure. The tire will beunderinflated.

You should get your own tirepressure gauge and use it wheneveryou check your tire pressures. Thiswill make it easier for you to tell if apressure loss is due to a tire problemand not due to a variation betweengauges.

Recommended Tire Pressures forNormal DrivingThe following chart shows therecommended cold tire pressures formost normal driving conditions andspeeds. Tire pressures for highspeed driving are the same as fornormal driving.

The compact spare tire pressure is:60 psi (420 kPa , 4.2 kgf/cm2)

These pressures are also given onthe tire information label on thedriver's doorjamb.

Maintenance

Front:

Rear:


Tires

Tubeless tires have some ability toself-seal if they are punctured.However, because leakage is oftenvery slow, you should look closelyfor punctures if a tire starts losingpressure.

InspectionEvery time you check inflation, youshould also examine the tires fordamage, foreign objects, and wear.You should look for:

Bumps or bulges in the tread orside of the tire. Replace the tire ifyou find either of these conditions.

Cuts, splits, or cracks in the sideof the tire. Replace the tire if youcan see fabric or cord.

Excessive tread wear.Your car's tires have wear indicatorsmolded into the tread. When thetread wears down to that point, youwill see a 1/2 inch (12.7 mm) wideband running across the tread. Thisshows there is less than 1/16 inch(1.6 mm) of tread left on the tire. Atire that is this worn gives very littletraction on wet roads. You shouldreplace the tire if you can see thetread wear indicator in three or moreplaces around the tire.

Maintenance

TREAD WEAR INDICATORS

INDICATOR LOCATION MARKS


Tires

MaintenanceIn addition to proper inflation,correct wheel alignment helps todecrease tire wear. If yon find a tireis worn unevenly, have your dealercheck the wheel alignment.

The tires were properly balanced bythe factory. They may need to berebalanced at some time before theyare worn out. Have your dealercheck the tires if you feel a consis-tent vibration while driving. A lireshould always be rebalanced if it isremoved from the wheel for repair.

Make sure the installer balances thewheels when you have new tiresinstalled. This increases ridingcomfort and tire life. Your car'soriginal tires were dynamic or "spin"balanced at the factory. For bestresults, have the installer perform adynamic balance.

Improper wheel weights can damageyour vehicle's aluminum wheels. Useonly Genuine Honda wheel weights forbalancing.

Tire RotationYou should not rotate your Honda'stires. The front and rear tires aredifferent sizes, so they cannot berotated front-to-rear. The original-equipment tires on your Honda havea unidirectional tread pattern, sothey cannot be rotated side-to-side.

Tire WearThe tires that came on your car weredesigned and constructed to providesuperior grip during acceleration,braking, and cornering. As a trade-off, they will wear more rapidly thantires used on ordinary passengercars. Because of the car's weightdistribution, and the fact that theyare the driving wheels, you mayexpect the rear tires to wear morerapidly than the front tires.

Maintenance

NOTICE


Tires

You should carefully inspect yourcar's tires for wear, damage, andproper inflation every 7,500 miles(12,000 km) (see page 186).

Replacing Tires and WheelsThe tires that came with your carwere selected to match the perform-ance capabilities of the car whileproviding the best combination ofhandling, ride comfort, and long life.You should replace them with radialtires of the same size, load range,speed rating, and maximum cold tirepressure rating (as shown on thetire's siclewall). Mixing radial andbias-ply tires on your car can reduceits braking ability, traction, andsteering accuracy. It is best to replace all four tires at

the same time. If that is not possibleor necessary, then replace the twofront tires or the two rear tires as apair. Replacing just one tire canseriously affect your car's handling.

CONTINUED

Maintenance

Installing improper tires on yourcar can affect handling andstability. This can cause a crashin which you can be seriouslyhurt or killed.

Always use the size and type oftires recommended in thisowner's manual.


Tires

The ABS works by comparing thespeed of the wheels. When replacingtires, use the same size originallysupplied with the car. Tire size andconstruction can affect wheel speedand may cause the system to work in-consistently.

If you ever need to replace a wheel,make sure the wheel's specificationsmatch those of the original wheelthat came on your car. Replacementwheels are available at your Hondadealer.

Winter DrivingTires that are marked "M + S" on thesidewall have an all-weather treaddesign. They should be suitable formost winter driving conditions. Tireswithout these markings are designedfor optimum traction in dryconditions. They may not provideadequate performance in winterdriving.For the best performance in snowyor icy conditions, you should installsnow tires or tire chains. They maybe required by local laws undercertain conditions.

Maintenance

Wheels and TiresWheels:

Front:16x6 1/2 JJ

Rear:16x7 1/2 JJ

Tires:Front:

205/55R1689WRear:

225/50R16 92W

See page 246 for information aboutDOT Tire Quality Grading.


Tires

Snow TiresIf you mount snow tires on yourHonda, make sure they are radialtires of the same size and load rangeas the original tires. Mount snowtires on all four wheels to balanceyour vehicle's handling in all weatherconditions. Keep in mind the tractionprovided by snow tires on dry roadsmay not be as high as your vehicle'soriginal equipment tires. You shoulddrive cautiously even when the roadsare clear. Check with the lire dealerfor maximum speed recommenda-tions.

Tire ChainsBecause your Honda has limited tireclearance, mount only SAE Class "S"cable-type traction devices on therear tires. Use traction devices onlywhen required by driving conditionsor local laws. Make sure they are thecorrect size for your tires.

Metal link-type "chains" should notbe used. No matter how tight theyseem to be installed, they can comeinto contact with the body andsuspension, causing serious damage.

When installing the cables, followthe manufacturer's instructions andmount them as tightly as you can.Drive slowly with them installed. Ifyou hear them coming in contactwith the body or chassis, stop andinvestigate. Make sure the cables areinstalled tightly, and that they arenot contacting the brake lines orsuspension. Remove them as soon asyou start driving on cleared roads.

Cables that are the wrong size orimproperly installed can damage yourcar's brake lines, suspension, body, andwheels. Stop driving if they are hittingany part of the car.

Maintenance

NOTICE


Lights

Check the operation of your car'sexterior lights at least once a month.A burned out bulb can create anunsafe condition by reducing yourcar's visibility and the ability tosignal your intentions to otherdrivers.

Maintenance

SIDE TURN SIGNAL LIGHT

TURN SIGNAL

FRONT PARKING ANDSIDE MARKER LIGHT

LOW BEAMHEADLIGHT

HIGH BEAMHEADLIGHT


Lights

Check the following:

Headlights (low and high beam)Parking lightsTaillightsBrake lightsTurn signalsBack-up lightsHazard light functionLicense plate lightSide marker lightsDaytime running lights(Canadian cars)

If you find any bulbs are burned out,replace them as soon as possible.Refer to the chart on page 245 todetermine what type of replacementbulb is needed.

Maintenance

SIDE MARKER LIGHT

STOP/TAILLIGHT

BACK-UP LIGHT

LICENSE PLATE LIGHT

TURN SIGNAL LIGHT


Lights

Replacing a Headlight BulbThe low beam headlight bulbs are atype of high voltage discharge tube.High voltage can remain in thecircuit even with the light switch offand the key removed. Because ofthis, you should not attempt toexamine or change a low beamheadlight bulb yourself. If a lowbeam headlight bulb fails, take thecar to your dealer to have it replaced.

Halogen bulbs are used for the highbeam headlight bulbs. Whenreplacing a high beam headlight bulb,handle it by its base and protect theglass from contact with your skin orhard objects. If you touch the glass,clean it with denatured alcohol and aclean cloth.

Halogen headlight bulbs get very hotwhen lit. Oil, perspiration, or a scratchon the glass can cause the bulb tooverheat and shatter.

Maintenance

NOTICE


Lights

1. Open the hood.If you need to change the highbeam headlight bulb on the leftside, remove the coolant reservetank from its holder by pulling itstraight up.

2. Remove the electrical connectorfrom the bulb by squeezing theconnector to unlock the lab, thenslide the connector off the bulb.

3. Remove the rubber weather sealby pulling on the tab.

4. Unclip the end of the hold-downwire from its slot. Pivot it out ofthe way and remove the bulbsocket.

5. Pull the bulb straight out of itssocket.Push the new bulb straight intothe socket until it bottoms.

6. Insert the socket back into theheadlight assembly. Make surethe bulb is installed correctly bylooking through the headlight lens.The pins on the base of the bulbshould fit in the holes in theheadlight assembly. Pivot the hold-down wire back in place and clipthe end into the slot.

7. Install the rubber seal over theback of the headlight assembly.Make sure it is right side up; it ismarked "TOP."

8. Push the electrical connector ontothe new bulb.Turn on the headlights to test thenew bulb.

Maintenance


Lights

Replacing Front Turn Signal andSide Marker Light Bulbs1. It you are changing the bulb on

the driver's side, start the engine,turn the steering wheel all the wayto the right, and turn off theengine. If you are changing thebulb on the passenger's side, turnthe steering wheel to the left.

2. Use a flat-tipped screwdriver toremove the three holding clipsfrom the inner fender.

3. Pull the inner fender cover back.

4. Remove the socket from theheadlight assembly by turning itone-quarter turn counterclockwise.

5. Pull the bulb straight out of itssocket.

6. Install the new bulb in the socket.

7. Insert the socket back into theheadlight assembly. Turn itclockwise to lock it in place.

8. Test the lights to make sure thenew bulb is working.

9. Put the inner fender in place.Install the two holding clips. Lockeach clip in place by pushing onthe center.

Maintenance


Replacing a Side Turn Signal Bulb

1. Push the side turn signal assemblyforward until it pops out of thebody.

2. Turn the bulb holder one-quarterturn counterclockwise to remove itfrom the lens.

3. Pull the bulb straight out of itssocket.Push the new bulb straight intothe socket until it bottoms.

4. Put the bulb holder back into itshole in the lens, and turn itclockwise until it locks.


6. Put the side turn signal assemblyback into the body, back first.Push on the front edge until itsnaps into place.

Maintenance

Lights


Lights

Replacing Rear Bulbs

1. Open the trunk.

2. Remove the fasteners from thetrunk lining. To remove a fastener,push on the center of the headuntil it pops in. Then pull it out.

3. Pull the lining back.

4. Determine which of the four bulbsis burned out: stop/taillight, back-up light, turn signal, or sidemarker.

5. Remove the socket by turning itone-quarter turn counterclockwise.

6. Remove the burned out bulb. Toremove the stop/taillight, back-upor side marker light bulb, pull thebulb straight out of its socket. Toremove the turn signal light bulb,push it in and turn itcounterclockwise until it unlocks.

Maintenance


Lights

7. Install the new bulb in the socket.

8. Push the socket into the lightassembly and turn it clockwiseuntil it locks.


10. Install the trunk lining and secureit with the fasteners. To reinstall afastener, reset the fastener bypushing on the pointed end until itpops back almost flush with thefingers on the housing. Put thefastener in the hole of the trunklining and push on the center untilit locks (the center is flush withthe head).

Maintenance


Lights

Replacing a Rear License Bulb

1. Insert a flat blade screwdriverbetween the left edge of the lensand the housing. The lens willcome down.

2. Pull the bulb straight out of itssocket. Push the new bulb in untilit bottoms in the socket.


4. Put the lens back into the lightassembly, right side first. Push onthe left edge until it snaps intoplace.

Maintenance


Lights

Replacing an Interior Light Bulb

1. Remove the lens by carefullyprying on the front edge of thelens near both sides.

2. Remove the bulb by pulling itstraight out of its metal tabs.

3. Push the new bulb into the metaltabs. Snap the lens bark in place.

Replacing the Trunk Light Bulb

1. Open the trunk. Pull down thetrunk light cover.

2. Remove the bulb by pulling itstraight out of its metal tabs.

3. Push the new bulb into the metaltabs.

4. Push the cover back in place.

Maintenance


Storing Your Car

If you need to park your car for anextended period (more than onemonth), there are several things youshould do to prepare it for storage.Proper preparation helps preventdeterioration and makes it easier toget your car back on the road. Ifpossible, store your car indoors.

Fill the fuel tank.

Change the engine oil and filter(see page 159).

Wash and dry the exteriorcompletely.

Clean the interior. Make sure thecarpeting, floor mats, etc. arecompletely dry.

Raise the convertible top cover.

Leave the parking brake off. Putthe transmission in Reverse.

Block the rear wheels.

If the car is to be stored for alonger period, it should besupported on jackstands so thetires are off the ground.

Leave one window open slightly (ifthe car is being stored indoors).

Disconnect the battery.

Support the front wiper bladearms with a folded towel or rag sothey do not touch the windshield.

To minimize sticking, apply asilicone spray lubricant to all doorand trunk seals. Also, apply avehicle body wax to the paintedsurfaces that mate with the doorand trunk seals.

Cover the car with a "breathable"cover, one made from a porousmaterial such as cotton.Nonporous materials, such asplastic sheeting, trap moisture,which can damage the paint.

If possible, run the engine for awhile periodically (preferably oncea month).

If you store your car for 12 monthsor longer, have your Honda dealerperform the inspections called for inthe 24 months/30,000 miles (48,000km) maintenance schedule as soonas you take it out of storage (seepage 148). The replacements calledfor in the maintenance schedule arenot needed unless the car hasactually reached that time or mileage.

Maintenance


Appearance Care

Regular cleaning and polishing ofyour Honda helps to keep it "new"looking. This section gives you hintson how to clean your car andpreserve its appearance: the paint,brightwork, wheels and interior. Alsoincluded are several things you cando to help prevent corrosion.

Exterior Care.................................. 204Washing...................................... 204Waxing........................................ 205Aluminum Wheels..................... 206Paint Touch-up........................... 206

Interior Care................................... 207Carpeting.................................... 207Fabric.......................................... 207Vinyl............................................ 207Leather........................................ 207Rear Window.............................. 207Seat Belts.................................... 207Windows..................................... 208Air Fresheners........................... 208

Corrosion Protection..................... 208Body Repairs.................................. 210

Appearance Care

Main Menu ▲ ▼

Exterior Care

WashingFrequent washing helps preserveyour car's beauty. Dirt and grit canscratch the paint, while tree sap andbird droppings can permanently ruinthe finish.

Wash your car in a shady area, not indirect sunlight. If the car is parked inthe sun, move it into the shade andlet the exterior cool down before youstart.

Only use the solvents and cleanersrecommended in this Owner'sManual.

Chemical solvents and strong cleanerscan damage the paint, metal, andplastic on your car.

Rinse the car thoroughly with coolwater to remove loose dirt.

Fill a bucket with cool water. Mixin a mild detergent, such asdishwashing liquid or a productmade especially for car washing.

Wash the car, using the water andneutral detergent solution andsponge or soft cloth. Start at a topand work your way down. Rinsefrequently.

Check the body for road tar, treesap, etc. Remove these stains withtar remover or turpentine. Rinse itoff immediately so it does notharm the finish. Remember to re-wax these areas, even if the rest of

the car does not need waxing.Do not use harsh chemicals toremove stains from theconvertible top or rear window.Use a mild detergent/watersolution with a soft-bristle brushon the top, and with a soft cloth onthe rear window.

When you have washed and rinsedthe whole exterior, dry it with achamois or soft towel. Letting itair-dry will cause dulling and waterspots.Make sure the top is completelydry before you fold it.

As you dry the car, inspect it forchips and scratches that could allowcorrosion to start. Repair them withtouch-up paint (see page 206).

Appearance Care

NOTICE


Exterior Care

WaxingAlways wash and dry the whole earbefore waxing it. You should waxyour car, including the metal trim,whenever water sits on the surfacein large patches. It should form intobeads or droplets after waxing.

You should use a quality liquid orpaste wax. Apply it according to theinstructions on the container. Ingeneral, there are two types ofproducts:

Waxes — A wax coats the finish andprotects it from damage by exposureto sunlight, air pollution, etc. Youshould use a wax on your Hondawhen it is new.

Polishes — Polishes and cleaner/waxes can restore the shine to paintthat has oxidized and lost some of itsshine. They normally contain mildabrasives and solvents that removethe top layer of the finish. Youshould use a polish on your Honda ifthe finish does not have its originalshine after using a wax.

Cleaning tar, insects, etc. withremovers also takes off the wax.Remember to re-wax those areas,even if the rest of the car does notneed waxing.

Appearance Care


Exterior Care

Aluminum WheelsClean your Acura's aluminum alloywheels as yon do the rest of theexterior. Wash them with the samesolution, and rinse them thoroughly.

The wheels have a protective clear-coat that keeps the aluminum fromcorroding and tarnishing. Usingharsh chemicals, including somecommercial wheel cleaners, or stiffbrushes can damage this clear-coat.Only use a mild detergent and softbrush or sponge to clean the wheels.

Paint Touch-upYour dealer has touch-up paint tomatch your car's color. The colorcode is printed on a sticker on thedriver's doorjamb. Take this code toyour dealer so you are sure to getthe correct color.

Inspect your car frequently for chipsor scratches in the paint. Repairthem right away to prevent corrosionof the metal underneath. Use thetouch-up paint only on small chipsand scratches. More extensive paintdamage should be repaired by aprofessional.

Appearance Care


Interior Care

CarpetingVacuum the carpeting frequently toremove dirt. Ground-in dirt will makethe carpet wear out faster.Periodically shampoo the carpel tokeep it looking new. Use one of thefoam-type carpet cleaners on themarket. Follow the instructions thatcome with the cleaner, applying itwith a sponge or soft brush. Keepthe carpeting as dry as possible bynot adding water to the foam.

FabricVacuum dirt and dust out of thematerial frequently. For generalcleaning, use a solution of mild soapand lukewarm water, letting it air dry.To clean off stubborn spots, use acommercially-available fabric cleaner.Test it on a hidden area of the fabricfirst, to make sure it does not bleachor stain the fabric. Follow theinstructions that come with thecleaner.

VinylRemove dirt and dust with a vacuumcleaner. Wipe the vinyl with a softcloth dampened in a solution of mildsoap and water. Use the samesolution with a soft-bristle brush onmore difficult spots. You can also usecommercially-available spray orfoam-type vinyl cleaners.

LeatherVacuum dirt and dust from theleather frequently. Pay particularattention to the pleats and seams.Clean the leather with a soft clothdampened with clear water, thenbuff it with a clean, dry cloth. Iffurther cleaning is needed, use asoap specifically for leather, such assaddle soap. Apply this soap with adamp, soft cloth. Wipe down andbuff as described above.

Rear WindowClean the rear window with eitherclean water or a mild detergent/water solution and a soft, damp cloth.Never use a brush or dry cloth, anddo not use any harsh chemicals orabrasive cleaners. You will damagethe window.

Polish the rear window periodicallywith a commercially available plasticpolish made especially forconvertible rear windows.

Seat BeltsIf your seat belts get dirty, you canuse a soft brush with a mixture ofmild soap and warm water to cleanthem. Do not use bleach, dye. orcleaning solvents. They can weakenthe belt material. Let the belts air-dry before you use the car.

Appearance Care


Interior Care, Corrosion Protection

WindowsClean the windows, inside and out,with a commercially-available glasscleaner. You can also use a mixtureof one part white vinegar to ten partswater. This will remove the haze thatbuilds up on the inside of thewindows. Use a soft cloth or papertowels to clean all glass and clearplastic surfaces.

Air FreshenersIf you want to use an air freshener/deodorizer in the interior of your car,it is best to use a solid type. Someliquid air fresheners contain chemi-cals that may cause parts of theinterior trim and fabric to crack ordiscolor.

If you use a liquid air freshener,make sure you fasten it securely so itdoes not spill as you drive.

Corrosion ProtectionTwo factors normally contribute tocausing corrosion in your car:

1. Moisture trapped in body cavities.Dirt and road salt that collects inhollows on the underside of thecar stays damp, promotingcorrosion in that area.

2. Removal of paint and protectivecoatings from the exterior andunderside of the car.

Appearance Care


Corrosion Protection

Many corrosion-preventive measuresare built into your Honda. You canhelp keep your car from corrodingby performing some simple periodicmaintenance:

Repair chips and scratches in thepaint as soon as you discover them.

Inspect and clean out the drainholes in the bottom of the doorsand body.

Check the floor coverings fordampness. Carpeting and floormats may remain damp for a longtime, especially in winter. Thisdampness can eventually causethe floor panels to corrode.

Use a high-pressure spray to cleanthe underside of your car. This isespecially important in areas thatuse road salt in winter. It is also agood idea in humid climates andareas subject to salt air. Be carefulof the ABS wheel sensors andwiring at each wheel.

Have the corrosion-preventivecoatings on the underside of yourcar inspected and repairedperiodically.

Appearance Care


Body Repairs

Body repairs can affect your car'sresistance to corrosion. If your carneeds repairs after a collision, payclose attention to the parts used inthe repair and the quality of thework.

Make sure the repair facility usesGenuine Honda replacement bodyparts. Some companies make sheetmetal pieces that seem to duplicatethe original Honda body parts, butare actually inferior in fit, finish, andcorrosion resistance. Once installed,they do not give the same high-quality appearance.

When reporting your collision to theinsurance company, tell them youwant Genuine Honda parts used inthe repair. Although most insurersrecognize the quality of originalparts, some may try to specify thatthe repairs be done with otheravailable parts. You should investi-gate this before any repairs havebegun.

Take your car to your authorizedHonda dealer for inspection alter therepairs are completed. Your dealercan make sure that quality materialswere used, and that corrosion-preventive coatings were applied toall repaired and replaced parts.

Appearance Care


Taking Care of the Unexpected

This section covers the more-common problems that motoristsexperience with their vehicles. Itgives you information about how tosafely evaluate the problem and whatto do to correct it. If the problem hasstranded you on the side of the road,you may be able to get going again.If not, you will also find instructionson getting your car towed.

Compact Spare Tire....................... 212Changing a Flat Tire ..................... 213If Your Engine Won't Start........... 218

Nothing Happens or theStarter Motor Operates

Very Slowly......................... 218The Starter Operates

Normally................................. 219Jump Starting................................. 220If Your Engine Overheats............. 223Low Oil Pressure Indicator .......... 226Charging System Indicator........... 227Malfunction Indicator Lamp ........ 228Brake System Indicator................ 229Closing the Convertible Top........ 230Fuses............................................... 231

Checking and Replacing........... 232If Your Car Gets Stuck.................. 236Emergency Towing....................... 238


Main Menu ▲ ▼

Compact Spare Tire

Your car has a compact spare tirethat takes up less space. Use thisspare tire as a temporary replace-ment only. Get your regular tirerepaired or replaced and put back onyour car as soon as you can.

Check the inflation pressure of thecompact spare tire every time youcheck the other tires. It should beinflated to:60 psi (420 kPa , 4.2 kgf/cm2)

Follow these precautions wheneveryou are using the compact spare tire:

Do not exceed 50 mph (80 km/h)under any circumstances.

This tire gives a harsher ride andless traction on some road sur-faces than the regular tire. Usegreater caution while driving onthis tire.

Do not mount snow chains on thecompact spare.

The wheel of the compact sparetire is designed especially to fityour car. Do not use your sparetire on another vehicle unless it isthe same make and model.

INDICATOR LOCATION MARK

The compact spare tire has a shortertread life than a regular tire. Replaceit when you can see the tread wearindicator bars. The replacementshould be the same size and designtire, mounted on the same wheel.The compact spare tire is notdesigned to be mounted on a regularwheel, and the compact wheel is notdesigned for mounting a regular tire.


TREAD WEAR INDICATOR BAR


Changing a Flat Tire

If you have a flat tire while driving,stop in a safe place to change it.Stopping in traffic or on the shoulderof a busy road is dangerous. Driveslowly along the shoulder until youget to an exit or an area to stop thatis far away from the traffic lanes.

The compact spare tire is smallerthan a standard tire, which will affectthe vehicle's handling. Drivecautiously when this spare ismounted on your vehicle.

The size difference may also causedamage to the rear differential, so donot mount the compact spare on therear. If either rear tire goes flat,remove the front tire on that sameside, mount the compact spare tireon the front, then mount the frontlire on the rear.

1. Park the car on firm, level, non-slippery ground away from traffic.Put the transmission in Reverse.Apply the parking brake.

2. Turn on the hazard warning lightsand turn the ignition switch toLOCK (0). Have your passengerget out of the car while youchange the tire.

3. Open the trunk. Lift up the toolbox lid and take the jack, wheelwrench and extension out of thetool box.

Use the jack that came on your car. Ifyou try to raise another car by this jackor use another jack to raise your car,the car or jack can be damaged.


NOTICE

The car can easily roll off thejack, seriously injuring anyoneunderneath.

Follow the directions forchanging a tire exactly, andnever get under the car when itis supported only by the jack.

CONTINUED



4. Remove the three clips holdingthe spare tire cover by pullingstraight up on the rings. Removethe spare tire cover.

5. Unscrew the wing boll and takethe spare tire out of the spare tireshelf.

6. Loosen the five wheel nuts 1/2turn with the wheel wrench.

7. Locale the jacking point nearestthe tire you need to change. It ispointed to by an arrow molded intothe underside of he body. Placethe jack under he jacking point.Turn the end bracket clockwiseuntil the top of the jack contactshe jacking point. Make sure thejacking point tab is resting in thejack notch.




8. Use the extension and wheelwrench as shown to raise the caruntil the flat tire is off the ground.

9. Remove the wheel nuts and flattire. Temporarily place the flat tireon the ground with the outsidesurface of the wheel facing up.Placing the wheel face down couldmar its finish.

BRAKE HUB

10. Before mounting the spare tire,wipe any dirt off the mountingsurface of the wheel and hub witha clean cloth. Wipe the hubcarefully, it may be hot fromdriving.


CONTINUED



11. Put on the spare tire. Put thewheel nuts back on finger-tight,then tighten them in a crisscrosspattern with the wheel wrenchuntil the wheel is firmly againstthe hub. Do not try to tightenthem fully.

12. Lower the car to the ground andremove the jack.

13. Tighten the wheel nuts securely inthe same crisscross pattern. Havethe wheel nut torque checked atthe nearest automotive servicefacility.Tighten the wheel nuts to:80 lbf.ft (108 N.m , 11 kgf.m)




14. Remove the tool box from thetrunk well and replace the jack,wheel wrench and extension in thetool box.

15. Place the tool box into the sparetire shelf in the trunk.

16. Replace the spare tire cover.Secure it with the three clips. Pusheach clip down securely, and pivotthe ring down flat.

17. Put the flat tire in the trunk wellvertically as shown.

Taking Care of the Uncxpeeted


If Your Engine Won't Start

Diagnosing why your engine won'tstart falls into two areas, dependingon what you hear when yon pressthe ENGINE START button.

You hear nothing, or almostnothing. The engine's startermotor does not operate at al l oroperates very slowly.

You can hear the starter motoroperating normally, or the startermotor sounds like it is spinningfaster than normal, but the enginedoes not start up and run.

Nothing Happens or the StarterMotor Operates Very SlowlyWhen you press the ENGINE"START button, you do not hear thenormal noise of the engine trying tostart. You may hear a clicking soundor series of clicks, or nothing at all.Check these things:

Your car has the ImmobilizerSystem. You should use aproperly-coded master or valet keyto start the engine (see page 59).A key that is not properly codedwill cause the immobilizer systemindicator in the dash panel to blinkrapidly.

Turn the ignition switch to ON (II).Turn on the headlights and checktheir brightness. If the headlightsare very dim or don't light at all,the battery is discharged. SeeJump Starting on page 220.

Press the ENGINE START button,then release it. If the headlights donot dim, check the condition of thefuses. If the fuses are OK, there isprobably something wrong withthe electrical circuit for theignition switch or starter motor.You will need a qualifiedtechnician to determine theproblem. (See EmergencyTowing on page 238.)



If Your Engine Won't Start

If the headlights dim noticeably orgo out when you try to start theengine, either the battery is dis-charged or the connections arecorroded. Check the condition of thebattery and terminal connections(see page 177). You can then tryjump starting the car from a boosterbattery (see page 220).

The Starter Operates NormallyIn this case, the starter motor'sspeed sounds normal, or even fasterthan normal, when you press theENGINE START button, but theengine does not run.

Are you using the proper starting-procedure? Refer to Starting theEngine on page 131.

Do you have fuel? Turn theignition switch to ON (II) for aminute and watch the fuel gauge.The low fuel level warning lightmay not be working, so you werenot reminded to fill the tank.

There may be an electricalproblem, such as no power to thefuel pump. Check all the fuses(see page 231).

If you find nothing wrong, you willneed a qualified technician to findthe problem. See EmergencyTowing on page 238.



Jump Starting

If your car's battery has run down,you may be able to start the engineby using a booster battery. Althoughthis seems like a simple procedure,you should take several precautions.

To jump start your car, follow thesedirections closely:

1. Open the hood and check thephysical condition of the battery(see page 177). In very coldweather, check the condition ofthe electrolyte. If it seems slushyor like ice, do not try jump startinguntil it thaws.

If a battery sits in extreme cold, theelectrolyte inside can freeze.Attempting to jump start with a frozenbattery can cause it to rupture.

2. Turn off all the electrical acces-sories: heater, A/C, stereo system,lights, etc.Put the transmission in Neutraland set the parking brake.


NOTICE

A battery can explode if you donot follow the correct procedure,seriously injuring anyonenearby.

Keep all sparks, open flames,and smoking materials awayfrom the battery.


Jump Starting

3. Connect one jumper cable to thepositive ( + ) terminal on thebooster battery. Connect the otherend to the positive ( + ) terminalon your Honda's battery.

4. Connect the second jumper cableto the negative ( — ) terminal onthe booster battery. Connect theother end to the metal projectionnear the intake manifold as shownin the illustration. Do not connectthis jumper cable to any other partof the engine.

5. If the booster battery is in anothervehicle, have an assistant startthat vehicle and run it at a fast idle.

CONTINUED



Jump Starting

BOOSTER BATTERY

6. Start your car. If the starter motorstill operates slowly, check thejumper cable connections to makesure they have good metal-to-metal contact.

7. Once your car is running, discon-nect the negative cable from yourcar, then from the booster battery.Disconnect the positive cable fromyour car, then the booster battery.



If Your Engine Overheats

The reading on your car'stemperature gauge should stay inthe midrange under most conditions.It may go higher if you are driving upa long steep hill on a very hot day. Ifit climbs to the red mark, you shoulddetermine the reason.

Driving with the temperature gaugereading at the red mark can causeserious damage to your engine.

Your car can overheat for severalreasons, such as lack of coolant or amechanical problem. The onlyindication may be the temperaturegauge climbing to or above the redmark. Or you may see steam orspray coming from under the car orengine cover. In either case, youshould take immediate action.

1. Safely pull to the side of the road.Put the transmission in Neutraland set the parking brake. Turnoff the heating and cooling systemand all other accessories. Turn onthe hazard warning indicators.

2. If you see steam and/or spraycoming from under the hood, turnoff the engine.

3. If you do not see steam or spray,leave the engine running andwatch the temperature gauge. Ifthe high heat is due to overloading(climbing a long, steep hill on ahot day with the A/C running, forexample), the engine should startto cool down almost immediately.If it does, wait until the tempera-ture gauge comes down to the mid-point then continue driving.

4. If the temperature gauge stays atthe red mark, turn off the engine.

5. Wait until you see no more signsof steam or spray, then open thehood.

CONTINUED


Steam and spray from anoverheated engine canseriously scald you.

Do not open the hood if steamis coming out.

NOTICE



6. Look for any obvious coolant leaks,such as a split radiator hose.Everything is still extremely hot,so use caution. If you find a leak, itmust be repaired before youcontinue driving (see EmergencyTowing on page 238).

7. If you don't find an obvious leak,check the coolant level in theradiator reserve tank (see page120). If the level is below the

MIN mark, add coolant to halfwaybetween the MIN and MAX marks.

8. If there was no coolant in thereserve tank, you may also have toadd coolant to the radiator. Let theengine cool down until the readingreaches the middle of thetemperature gauge, or lower,before checking the radiator.

9. Using gloves or a large heavycloth, turn the radiator capcounterclockwise, without pushing-down, to the first stop. Thisreleases any remaining pressure inthe cooling system. After thepressure releases, push down onthe cap and turn it until it comesoff.


Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.



10. Start the engine and set thetemperature control dial tomaximum. Add coolant to theradiator up to the base of the fillerneck. If you do not have theproper coolant mixture available,you can add plain water.Remember to have the coolingsystem drained and refilled withthe proper mixture as soon as youcan.

11. Put the radiator cap back ontightly. Run the engine and watchthe temperature gauge. If it goesback to the red mark, the engineneeds repair. (See EmergencyTowing on page 238.)

12. If the temperature stays normal,check the coolant level in theradiator reserve tank. If it hasgone down, add coolant to theMAX mark. Put the cap back ontightly.



Low Oil Pressure Indicator

LOW OIL PRESSURE INDICATOR

This indicator should light when theignition switch is ON (II), and go outafter the engine starts. It shouldnever come on when the engine isrunning. If it starts flashing, itindicates that the oil pressuredropped very low for a moment, thenrecovered. If the indicator stays onwith the engine running, it showsthat the engine has lost oil pressureand serious engine damage ispossible. In either case, you shouldtake immediate action.

Running the engine with low oilpressure can cause serious mechanicaldamage almost immediately. Turn offthe engine as soon as you can safely getthe car stopped.

1. Safely pull off the road and shutoff the engine. Turn on the hazardwarning indicators.

2. Let the car sit for a minute. Openthe hood and check the oil level(see page 119). Although oil leveland oil pressure are not directlyconnected, an engine that is verylow on oil can lose pressure duringcornering and other drivingmaneuvers.

3. If necessary, add oil to bring thelevel back to the full mark on thedipstick (see page 120).

4. Start the engine and watch the oilpressure indicator. If the lightdoes not go out within ten seconds,turn off the engine. There is amechanical problem that needs tobe repaired before you cancontinue driving. (See EmergencyTowing on page 238.)


PUSH CANCEL

NOTICE


Charging System Indicator

CHARGING SYSTEM INDICATOR

This indicator should come on whenthe ignition switch is ON (II), and goout after the engine starts. If itcomes on brightly when the engineis running, it indicates that thecharging system has stoppedcharging the battery.

Immediately turn off all electricalaccessories: radio, heater, A/C,cruise control, etc. Try not to useother electrically-operated controlssuch as the power windows. Keepthe engine running and take extracare not to stall it. Starting theengine will discharge the batteryrapidly.

By eliminating as much of theelectrical load as possible, you candrive several miles (kilometers)before the battery is too dischargedto keep the engine running. Drive toa service station or garage whereyou can get technical assistance.


PUSH CANCEL


Malfunction Indicator Lamp

MALFUNCTION INDICATOR LAMP

This indicator comes on for a fewseconds when you turn the ignitionswitch ON (II). If it comes on at anyother time, it indicates one of theengine's emissions control systemsmay have a problem. Even thoughyou may feel no difference in yourcar's performance, it can reduceyour fuel economy and cause yourcar to put out excessive emissions.Continued operation may causeserious damage.

If you have recently refueled yourcar, the cause of this indicatorcoming on could be a loose ormissing fuel fill cap. Check the capand tighten it until it clicks at leastthree times. Replace the fuel fill capif it is missing. Tightening the capwill not make the indicator turn offimmediately; it takes three drivingtrips.

If the indicator remains on past threedriving trips, or the fuel cap was notloose or missing, have the carchecked by the dealer as soon aspossible. Drive moderately until thedealer has inspected the problem.Avoid full-throttle acceleration anddriving at high speed.

You should also have the dealerinspect your car if this indicatorcomes on repeatedly, even though itmay turn off as you continue driving.

If you keep driving with themalfunction indicator lamp on, you candamage your car's emissions controlsand engine. Those repairs may not hecovered by yonr car's warranties.


NOTICE

PUSH CANCEL


Brake System Indicator

BRAKE SYSTEM INDICATOR

The Brake System Indicator lightcomes on when you turn the ignitionON (II). If the parking brake is notset, it goes off after you start theengine. If the parking brake is set, itgoes off when you fully release theparking brake with the enginerunning.

If it comes on at any other time, itindicates a problem with the car'sbrake system. In most cases, theproblem is a low fluid level in thebrake fluid reservoir. Press lightly onthe brake pedal to see if it feelsnormal. If it does, check the brakefluid level the next time you stop at aservice station (see page 170). If thefluid level is low, take the car to yourdealer and have the brake systeminspected for leaks or worn brakepads.

However, if the brake pedal does notfeel normal, you should takeimmediate action. Because of thebrake system's dual-circuit design, aproblem in one part of the systemwill still give you braking at twowheels. You will feel the brake pedalgo down much farther before the carbegins to slow down, and you willhave to press harder on the pedal.The distance needed to stop will bemuch longer.

Slow down by shifting to a lowergear, and pull to the side of the roadwhen it is safe. Because of thelonger distance needed to stop, it ishazardous to drive the car. Youshould have it towed, and repaired assoon as possible.

If you must drive the car a shortdistance in this condition, driveslowly and cautiously.



Closing the Convertible Top

If the electric motor will not closethe convertible top, do the following.

1. Check the fuse for the convertibletop motor (see page 231). If thefuse is blown, replace it with oneof the same or lower rating.

2. Try closing the convertible top. Ifthe new fuse blows immediately orthe convertible top still does notoperate, you can close theconvertible top manually.

3. Locate the electrical connector forthe convertible top motor.It is under the lower corner of thedashboard on the passenger's side.Disconnect the connector bypushing the tab and pulling theconnector down.

4. Holding each corner of theconvertible top, raise the top andpush it forward as far as it will go.

5. Follow steps 5 through 7 of theclosing procedure on page 75.


CONNECTOR


Fuses

All the electrical circuits in your carhave fuses to protect them from ashort circuit or overload. Thesefuses are located in three fuse boxes.

The interior fuse box is underneaththe dashboard on the driver's side.

There are two under-hood fuseboxes in the engine compartment.

The main fuse box is located on thepassenger's side near the battery. Toopen it, push the two tabs as shown.

CONTINUED



Fuses

The auxiliary fuse box is located onthe driver's side near the brake fluidreservoir. To open it, push the tab oneach side and remove the lid.

Checking and Replacing FusesIf something electrical in your carstops working, the first thing youshould check for is a blown fuse.Determine from the chart on pages234 and 235 , or the diagram on thefuse box lid, which fuse or fusescontrol that component. Check thosefuses first, but check all the fusesbefore deciding that a blown fuse isnot the cause. Replace any blownfuses and check the component'soperation.

1. Turn the ignition switch to LOCK(0). Make sure the headlights andall other accessories are off.

2. Remove the cover from the fusebox.

3. Check each of the large fuses inthe under-hood fuse box bylooking through the top at the wireinside. Removing these fusesrequires a Phillips-head screw-driver.


BLOWN


Fuses

4. Check the smaller fuses by pullingout the fuse with the fuse pullerprovided in the interior fuse box.

5. Look for a burned wire inside thefuse. If it is burned, replace it withone of the spare fuses of the samerating or lower.

If you cannot drive the vehiclewithout fixing the problem, and youdo not have a spare fuse, take a fuseof the same rating or a lower ratingfrom one of the other circuits. Makesure you can do without (hat circuittemporarily (such as the accessorypower socket or radio).

If you replace the blown fuse with aspare fuse that has a lower rating, itmight blow out again. This does notindicate anything wrong. Replace thefuse with one of the correct rating assoon as you can.

Replacing a fuse with one that has ahigher rating greatly increases thechances of damaging the electricalsystem. If you do not have a replace-ment fuse with the proper rating for thecircuit, install one with a lower rating.

6. If the replacement fuse of thesame rating blows in a short time,there is probably a seriouselectrical problem in your car.Leave the blown fuse in thatcircuit and have your car checkedby a qualified mechanic.

CONTINUED


NOTICE

FUSE PULLERBLOWN


Fuses

INTERIOR FUSE BOX

* : Canadian Model



Fuses

(AUXILIARY FUSE BOX)


UNDER-HOOD FUSE BOXES(MAIN FUSE BOX)


If Your Car Gets Stuck

If your car gels stuck in sand, mud,or snow, call a towing service to pullit out (see page 238).

For very short distances, such asfreeing the car, you can use thedetachable towing hook that mountson the anchors in the front and rearbumpers.

To use the towing hook:

1. Remove the cover from thebumper.

2. Remove the towing hook, hookextension and wheel wrench fromthe tool box.

3. Using the wheel wrench, fastenthe extension into the bolt hole inthe anchor.



If Your Car Gets Stuck

4. Screw the towing hook into theextension and tighten it securelyby hand.



Emergency Towing

If your car needs to be towed, call aprofessional towing service or, if youbelong to one, an organization thatprovides roadside assistance. Nevertow your car behind another vehiclewith just a rope or chain. It is verydangerous.

There are three popular types ofprofessional towing equipment.

Flat-bed Equipment —The operatorloads your vehicle on the back of atruck. This is the only way yourS2000 should be transported.When you contact the towing agency,inform them that you have an S2000and that a flat-bed is required.

Wheel Lift Equipment —The towtruck uses two pivoting arms that gounder the tires (front or rear) and liftthem off the ground. The other twotires remain on the ground. Becausethe S2000 sits so low, the body couldcome in contact with the ground andbe damaged. This method oftowing is unacceptable.



Emergency Towing


Sling-type Equipment — The towtruck uses metal cables with hookson the ends. These hooks go aroundparts of the frame or suspension andthe cables lift that end of the car offthe ground. Your car's suspensionand body can be seriously damaged.This method of towing isunacceptable.


Technical Information

The diagrams in this section giveyou the dimensions and capacities ofyour Honda, and the locations of theidentification numbers. The expla-nations of several electronic andmechanical systems on your Hondaare for the more technically-orientedowner.

Identification Numbers................. 242Specifications................................. 244DOT Tire Quality Grading

(U.S. Vehicles)....................... 246Treadwear.................................. 246Traction....................................... 246Temperature.............................. 247

Oxygenated Fuels.......................... 248Driving in Foreign Countries....... 249Emissions Controls........................ 250

The Clean Air Act...................... 250Crankcase Emissions Control

System..................................... 250Evaporative Emissions Control

System..................................... 250Exhaust Emissions Controls.... 251

PGM-FI System..................... 251Ignition Timing Control

System................................. 251Secondary Air Injection

System................................. 251Three Way Catalytic

Converter............................ 251Replacement Parts..................... 251

Three Way Catalytic Converter... 252


Main Menu ▲ ▼

Identification Numbers

Your car has several identifyingnumbers located in various places.

The Vehicle Identification Number(VIN) is the 17-digit number yourHonda dealer uses to register yourcar for warranty purposes. It is alsonecessary for licensing and insuringyour car. The easiest place to findthe VIN is on a plate fastened to thetop of the dashboard. You can see itby looking through the windshieldon the driver's side. It is also on theCertification label attached to thedriver's doorjamb, and is stamped onthe engine compartment bulkhead.The VIN is also provided in bar codeon the Certification label.

VEHICLE IDENTIFICATION NUMBER

CERTIFICATION LABEL



Identification Numbers

The Engine Number is stamped onthe left front corner of the engineblock.

The Transmission Number is on alabel underneath the transmission.

TRANSMISSION NUMBER

ENGINE NUMBER



Specifications

* 1 : Including the coolant in the reserve tank and that remaining in theengine.Reserve tank capacity:0.16 US gal (0.6 , 0.13 Imp gal)

* 2 : Excluding the oil remaining in the engine.


page 174 .


Specifications


page 235

page 234


DOT Tire Quality Grading (U.S. Vehicles)

The tires on your vehicle meet allU.S. Federal Safety Requirements.All tires are also graded fortreadwear, traction, and temperatureperformance according toDepartment of Transportation(DOT) standards. The followingexplains these gradings.

Uniform Tire Quality GradingQuality grades can be found whereapplicable on the tire sidewallbetween the tread shoulder and themaximum section width. Forexample:

Treadwear 200Traction AATemperature A

TreadwearThe treadwear grade is a compara-tive rating based on the wear rate ofthe tire when tested under controlledconditions on a specified governmenttest course. For example, a tiregraded 150 would wear one and onehalf (1-1/2) times as well on thegovernment course as a tire graded100. The relative performance oftires depends upon the actual condi-tions of their use, however, and maydepart significantly from the normdue to variations in driving habits,service practices, and differences inroad characteristics and climate.

TractionThe traction grades, from highest tolowest, are AA, A, B, and C. Thosegrades represent the tire's ability tostop on wet pavement as measuredunder controlled conditions onspecified government test surfacesof asphalt and concrete. A tiremarked C may have poor tractionperformance.

Warning: The traction gradeassigned to this tire is based onstraight-ahead braking traction tests,and does not include acceleration,cornering, hydroplaning, or peaktraction characteristics.



DOT Tire Quality Grading (U.S. Vehicles)

TemperatureThe temperature grades are A (thehighest), B, and C, representing thetire's resistance to the generation ofheat and its ability to dissipate heatwhen tested under controlledconditions on a specified indoorlaboratory test wheel. Sustained hightemperature can cause the materialof the tire to degenerate and reducetire life, and excessive temperaturecan lead to sudden tire failure. Thegrade C corresponds to a level ofperformance which all passenger cartires must meet under the FederalMotor Vehicle Safety Standard No.109. Grades B and A representhigher levels of performance on thelaboratory test wheel than theminimum required by law.

Warning: The temperature grade forthis tire is established for a tire thatis properly inflated and not over-loaded. Excessive speed, underinfla-tion, or excessive loading eitherseparately or in combination, cancause heat build-up and possible tirefailure.



Oxygenated Fuels

Some conventional gasolines arebeing blended with alcohol or anether compound. These gasolinesare collectively referred to asoxygenated fuels. To meet clean airstandards, some areas of the UnitedStates and Canada use oxygenatedfuels to help reduce emissions.

If you use an oxygenated fuel, besure it is unleaded and meets theminimum octane rating requirement.

Before using an oxygenated fuel, tryto confirm the fuel's contents. Somestates/provinces require thisinformation to be posted on thepump.

The following are the U.S. EPA andCanadian CGSB approvedpercentages of oxygenates:

ETHANOL (ethyl or grain alcohol)You may use gasoline containing upto 10 percent ethanol by volume.Gasoline containing ethanol may bemarketed under the name "Gasohol.

MTBE (Methyl Tertiary ButylEther)You may use gasoline containing upto 15 percent MTBE by volume.

METHANOL (methyl or woodalcohol)You may use gasoline containing upto 5 percent methanol by volume aslong as it also contains cosolventsand corrosion inhibitors to protectthe fuel system. Gasoline containingmore than 5 percent methanol byvolume may cause starting and/orperformance problems. It may alsodamage metal, rubber and plasticparts of your fuel system.

If you notice any undesirableoperating symptoms, try anotherservice station or switch to anotherbrand of gasoline.

Fuel system damage or performanceproblems resulting from the use ofan oxygenated fuel containing morethan the percentages of oxygenatesgiven above are not covered underwarranty.



If you are planning to take yourHonda outside the U.S. or Canada,contact the tourist bureaus in theareas you will be traveling in to findout about the availability of unleadedgasoline with the proper octanerating.

If unleaded gasoline is not available,be aware that using leaded gasolinein your Honda will affect perfor-mance and fuel mileage, and damageits emissions controls. It will nolonger comply with U.S. andCanadian emissions regulations, andwill be illegal to operate in NorthAmerica. To bring your car back intocompliance will require the replace-ment of several components, such asthe oxygen sensors and the threeway catalytic converter. These re-placements are not covered underwarranty.

Driving in Foreign Countries



Emissions Controls

The burning of gasoline in your car'sengine produces several byproducts.Some of these are carbon monoxide(CO), oxides of nitrogen (NOx) andhydrocarbons (HC). Gasolineevaporating from the tank alsoproduces hydrocarbons. Controllingthe production of NOx, CO, and HCis important to the environment.Under certain conditions of sunlightand climate, NOx and HC react toform photochemical "smog." Carbonmonoxide does not contribute tosmog creation, but it is a poisonousgas.

The Clean Air ActThe United States Clean Air Act*sets standards for automobileemissions. It also requires thatautomobile manufacturers explain toowners how their emissions controlswork and what to do to maintainthem. This section summarizes howthe emissions controls work.Scheduled maintenance is on page148.

* In Canada, Honda vehicles complywith the Canadian Motor VehicleSafety Standards (CMVSS) forEmissions valid at the time they aremanufactured.

Crankcase Emissions ControlSystemYour car has a Positive CrankcaseVentilation System. This keepsgasses that build up in the engine'scrankcase from going into theatmosphere. The Positive CrankcaseVentilation valve routes them from

the crankcase back to the intakemanifold. They are then drawn intothe engine and burned.

Evaporative Emissions ControlSystemAs gasoline evaporates in the fueltank, an evaporative emissionscontrol canister filled with charcoaladsorbs the vapor. It is stored in thiscanister while the engine is off. Afterthe engine is started and warmed up,the vapor is drawn into the engineand burned during driving.



Emissions Controls

Exhaust Emissions ControlsThe exhaust emissions controlsinclude four systems: PGM-FI,Ignition Timing Control, SecondaryAir Injection System and Three WayCatalytic Converter. These foursystems work together to control theengine's combustion and minimizethe amount of HC, CO, and NOx thatcomes out the tailpipe. The exhaustemissions control systems areseparate from the crankcase andevaporative emissions controlsystems.

PGM-F I SystemThe PGM-FI System uses sequentialmultiport fuel injection.It has three subsystems: Air Intake,Engine Control, and Fuel Control.The Engine Control Module (ECM)uses various sensors to determinehow much air is going into theengine. It then controls how muchfuel to inject under all operatingconditions.

Ignition Timing Control SystemThis system constantly adjusts theignition timing, reducing the amountof HC, CO and NOx produced.

Secondary Air Injection SystemDuring engine warm-up, air ispumped into the exhaust to reduceemissions when the engine is cold.

Three Way Catalytic ConverterThe three way catalytic converter isin the exhaust system. Throughchemical reactions, it converts HC,CO, and NOx in the engine's exhaustto carbon dioxide (CO2), dinitrogen(N2), and water vapor.

Replacement PartsThe emissions control systems aredesigned and certified to work to-gether in reducing emissions tolevels that comply with the Clean AirAct. To make sure the emissionsremain low, you should use only newGenuine Honda replacement parts ortheir equivalent for repairs. Usinglower quality parts may increase theemissions from your car.

The emissions control systems arecovered by warranties separate fromthe rest of your car. Read yourwarranty manual for more informa-tion.



Three Way Catalytic Converter

The three way catalytic convertercontains precious metals that serveas catalysts, promoting chemicalreactions to convert the exhaustgasses without affecting the metals.The catalytic converter is referred toas a three-way catalyst, since it actson HO, CO, and NOx. A replacementunit must be an original Honda partor its equivalent.

The three way catalytic convertermust operate at a high temperaturefor the chemical reactions to takeplace. It can set on fire any com-bustible materials that come near it.Park your car away from high grass,dry leaves, or other flammables.

THREE WAY CATALYTIC CONVERTER

A defective three way catalyticconverter contributes to air pollution,and can impair your engine's per-formance. Follow these guidelines toprotect your car's three way catalyticconverter.

Always use unleaded gasoline.Even a small amount of leadedgasoline can contaminate thecatalyst metals, making the threeway catalytic converter ineffective.

Keep the engine tuned-up.

Have your car diagnosed andrepaired if it is misfiring, back-firing, stalling, or otherwise notrunning properly.



Warranty and Customer Relations

Customer RelationsInformation................................. 254

U.S. Zone Office Map.................... 255Canada Zone Office Map.............. 256Warranty Coverages..................... 257Reporting Safety Defects

(U.S. Vehicles)........................... 258Authorized Manuals...................... 259


Main Menu ▲ ▼

Customer Relations Information

Honda dealership personnel aretrained professionals. They shouldbe able to answer all your questions.If you encounter a problem that yourdealership does not solve to yoursatisfaction, please discuss it withthe dealership's management. TheService Manager or GeneralManager can help. Almost allproblems are solved in this way.

If you are dissatisfied with thedecision made by the dealership'smanagement, contact your HondaCustomer Relations Zone Office.Refer to the U.S. and Canadian ZoneOffice maps on the following pages.

When you call or write, please giveus this information:

Vehicle Identification Number(see page 242)Name and address of the dealerwho services your carDate of purchaseMileage on your carYour name, address, and tele-phone numberA detailed description of theproblemName of the dealer who sold thecar to you



U.S. Zone Office Map

The addresses and telephone numbers are subject to change. If you cannotreach your Zone office, ask your Honda dealer for the current information.

Western ZoneP.O. Box 2260

700 Van Ness Avenue

Torrance, California90509-2260(310) 781-4565

Northwestern ZoneP.O. Box 20186

12439 N.E. Airport WayPortland, Oregon 97230(503) 256-0943

(also includes Alaska andHawaii)

South Central Zone4529 Royal Lane

Irving, Texas 75063(972) 929-5481

Central Zone

101 South Stanfield RoadTroy, Ohio 45373(937) 332-6250

Northeastern ZoneP.O. Box 337

Eastgate Industrial Park115 Gaither DriveMoorestown, New Jersey 08057(609) 235-5533

Includes: NYC Metro area andFairfield County, CT area

Mid-Atlantic Zone902 Wind River Ln., Suite 200

Gaithersburg, Maryland 20878(301) 990-2020

Southeastern Zone1500 Morrison Parkway

Alpharetta. Georgia 30004(770) 442-2045

North Central Zone

601 Campus Drive, Suite A-9Arlington Heights, Illinois 60004(847) 870-5600

New England Zone555 Old County Road

Windsor Locks, Connecticut 06096(860) 623-3310See Zone 5 for:

NYC Metro area andFairfield County, CT area

West Central Zone1600 South Abilene Street, Suite D

Aurora, Colorado 80012(303) 696-3935

Puerto Rico and U.S. V.I.Bella International

P.O. Box 190816San Juan, PR 00919-0816(787) 250-4318



Canada Zone Office Map

COSTOMER RELATIONSRELATIONS AVEC LA CLIENTELE

Honda Canada Inc.715 Milner AvenueToronto, ONM1B 2K8

Tel: 1-888-9-HONDA-9

Fax: Toll-free 1-877-939-0909Toronto (416) 287-4776

Honda Canada Inc.National Office



Warranty Coverages

U.S. OwnersYour new Honda is covered by thesewarranties:

New Car Limited Warranty — coversyour new vehicle, except for thebattery, emissions control systemsand accessories, against defects inmaterials and workmanship.

Emissions Control Systems DefectsWarranty and EmissionsPerformance Warranty — these twowarranties cover your car's emis-sions control systems. Time, mileage,and coverage are conditional. Pleaseread the warranty manual for exactinformation.

Original Equipment Battery LimitedWarranty — this warranty gives upto 100 percent credit toward areplacement battery.

Seat Belt Limited Warranty — a seatbelt that fails to function properly iscovered for the useful life of thevehicle.

Rust Perforation Limited Warranty— all exterior body panels arecovered for rust-through from theinside for the specified time periodwith no mileage limit.

Accessory Limited Warranty —Genuine Honda Accessories arecovered under this warranty. Timeand mileage limits depend on thetype of accessory and other factors.Please read your warranty manualfor details.

Replacement Parts LimitedWarranty — covers all GenuineHonda replacement parts againstdefects in materials and workman-ship.

Replacement Battery LimitedWarranty — provides proratedcoverage for a replacement batterypurchased from a Honda dealer.

Replacement Muffler LifetimeLimited Warranty providescoverage for as long as the pur-chaser of the muffler owns the car.

Restrictions and exclusions apply toall these warranties. Please read the2000 Honda Warranty Informationbooklet that came with your car forprecise information on warrantycoverages. Your Honda's originaltires are covered by theirmanufacturer. Tire warranty infor-mation is in a separate booklet.

Canadian OwnersPlease refer to the 2000 WarrantyManual that came with your car.



Reporting Safety Defects (U.S. Vehicles)

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in additionto notifying American Honda MotorCo., Inc.

If NHTSA receives similar com-plaints, it may open an investigation,and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your dealer, orAmerican Honda Motor Co., Inc.

To contact NHTSA, you may eithercall the Auto Safety Hotline toll-freeat 1-800-424-9393 (or 366-0123 inWashington D.C. area) or write to:NHTSA, U.S. Department ofTransportation, Washington,D.C. 20590. You can also obtainother information about motorvehicle safety from the Hotline.



Authorized Manuals

Purchasing Factory Authorized Manuals(U.S. only)The following publications covering the operation andservicing of your car can be obtained from HelmIncorporated, either by filling out the attached form or,for credit card holders, calling the toll-free phone numberon the form. For manuals prior to the year shown below,contact Helm Incorporated, P.O. Box 07280, Detroit,Michigan 48207, or call 1-800-782-4356.

Valid only for sales within the U.S. Canadian owners shouldcontact their authorized Honda dealer.

By completing this form you can order the materials desired. You can

pay by check or money order, or charge to your credit card. Mail to

Helm Incorporated at the address shown on the back of the order form.

61S2A00

61S2A00EL

61S2A30

31S2A600


Authorized Manuals

P.O. BOX 07280 DETROIT, MICHIGAN 48207 1-800-782-4356

Service Manual:This manual covers maintenance and recommendedprocedures for repair to engine and chassis components.It is written for the Journeyman mechanic, but is simpleenough for most mechanically-inclined owners to under-stand.

Electrical Troubleshooting Manual:This manual complements the Service Manual byproviding in-depth troubleshooting information for eachelectrical circuit in your car.

Body Repair Manual:This manual describes the procedures involved in thereplacement of damaged body parts.


Index

AccessoriesInstallation.................................. 122

Accessory Power Socket................ 81ACCESSORY (Ignition Key

Position)........................................ 61Adding

Brake Fluid................................. 170Clutch Fluid................................ 171Engine Coolant........................... 161Engine Oil................................... 157Manual Transmission Fluid..... 168Windshield Washer Fluid......... 167

Additional Information AboutYour Seat Belts........................ 33

Lap/Shoulder Belt....................... 33Seat Belt Maintenance................ 34Seat Belt System Components... 33

Additional Information AboutYour SRS................................... 37

Additional Safety Precautions.... 38How the Automatic Seat Belt

Tensioners Work..................... 37How Your Airbags Work............ 35

How the SRS IndicatorWorks........................................ 37

SRS Components......................... 35Additives, Engine Oil..................... 158Adjustments

Mirrors.......................................... 79Seats.............................................. 68

Airbag (SRS)...................................... 9Air Cleaner Element...................... 172Air Conditioning............................... 86

Maintenance............................... 182Usage............................................. 86

Air Outlets (Vents).......................... 88Air Pressure, Tires........................ 185Alarm, Anti-theft............................ 113Alcohol in Gasoline........................ 248Aluminum Wheels, Cleaning........ 206Antifreeze....................................... 161Anti-lock Brakes (ABS)

Indicator Light.................... 45, 138Operation.................................... 136

Anti-theft Steering Column Lock .. 60Anti-theft System........................... 113Appearance Care........................... 203Audio Panel....................................... 82Audio System................................... 94

Automatic Car Washes................. 204Automatic Speed Control................ 55

Back-up Lamp Replacement......... 198Battery

Charging SystemIndicator............................ 44, 227

Jump Starting............................. 220Maintenance............................... 177Specifications............................. 245

Before Driving............................... 115Belts, Seat........................................... 8Beverage Holder.............................. 81Body Repair.................................... 210Brakes............................................. 136

Anti-lock System (ABS)............ 137Break-in, New Linings .............. 116Fluid.............................................. 170Light, Burned-out...................... 198Parking.......................................... 80System Indicator.......................... 44Wear Indicators, Disc ............... 136

COUNTINUED

Main Menu ▲ ▼

Index

Brakes. ABSOperation.................................... 137System Indicator................. 44, 139

Braking System.............................. 136Break-in, New Car......................... 116Brightness Control. Instruments... 52Brights, Headlights......................... 51Bulb Replacement.......................... 192

Back-up Lights........................... 198Brake Lights............................... 198Headlights.................................. 195License Plate Lights.................. 200Parking Lights........................... 196Side Marker Lights................... 198Specifications............................. 245Turn Signal Lights..................... 196

Bulbs, Halogen............................... 194

Cables, Jump Starting With.......... 220Capacities Chart............................. 244Carbon Monoxide Hazard.............. 39Cargo, Carrying............................. 124CAUTION, Explanation of............... iiCD Changer.................................... 107

Certification Label......................... 242Chains............................................. 191Change Oil

How to......................................... 159When to....................................... 146

Changing a Flat Tire..................... 213Changing Engine Coolant............. 163Charging System Indicator.... 44, 227Check Engine Light................ 45, 228Checking

Battery Condition...................... 177Brake Fluid................................. 170Clutch Fluid................................ 171Drive Belt.................................... 184Engine Coolant........................... 120Engine Oil................................... 119Fuses........................................... 232Manual Transmission Fluid..... 168

Checklist, Before Driving............. 115Cleaner, Air.................................... 172Cleaning.......................................... 203

Aluminum Wheels..................... 206Exterior....................................... 204Interior........................................ 207Leather........................................ 207Seat Belts.................................... 207

Vinyl............................................ 207Windows..................................... 208

Climate Control System.................. 86Clutch Fluid.................................... 171CO in the Exhaust......................... 250Cold Weather, Starting in............. 132Compact Spare Tire....................... 212Controls, Instruments and.............. 41Covertible Top................................. 71

Closing the Convertible Top...... 74Convertible Top Cover................ 76Maintenance................................. 77Opening the Covertible Top....... 71

CoolantAdding......................................... 161Checking..................................... 120Proper Solution.......................... 161Temperature Gauge.................... 47

Corrosion Protection..................... 208Crankcase Emission Control

System......................................... 250Cruise Control Operation............... 55Customer Relations

Information................................. 254

Main Menu ▲ ▼

Index

DANGER, Explanation of................. iiDashboard........................................ 42Daytime Running Lights................. 52Dead Battery, What to Do............ 220Defects, Reporting Safety............. 258Defrosting the Windows................. 91Dimensions..................................... 244Dimming the Headlights................ 51Dipstick

Engine Oil................................... 119Directional Signals........................... 53Disabled, Towing Your Car If...... 238Disc Brake Wear Indicators......... 136Disposal of Used Oil...................... 160Do Not Tow a Trailer....................141Doors

Locking and Unlocking............... 62Monitor Light............................... 45Power Door Locks....................... 62

DOT Tire Quality Grading........... 246Downshifting, 6-speed Manual

Transmission.............................. 134Driving............................................ 129

Economy..................................... 121

In Bad Weather.......................... 140In Foreign Countries................. 249

Economy, Fuel............................... 121Emergencies on the Road............. 211

Battery, Jump Starting.............. 220Changing a Flat Tire................. 213Charging System Indicator...... 227Checking the Fuses................... 232Closing the Convertible Top.... 230Low Oil Pressure Indicator...... 226Malfunction Indicator Lamp.... 228Overheated Engine................... 223

Emergency Brake............................ 80Emergency Flashers....................... 79Emission Controls......................... 250Engine

Check Engine Light........... 45, 228Compartment. Checking

in the....................................... 118Coolant........................................ 120Coolant Temperature Gauge..... 47Drive Belt.................................... 184

Malfunction IndicatorLamp................................. 45, 228

Oil Pressure Indicator......... 44, 226Oil, What Kind to Use............... 157Overheating................................ 223Specifications............................. 244

Engine Cover. Opening the.......... 118Ethanol in Gasoline ....................... 248Evaporative Emission Controls.... 250Exhaust Fumes................................ 39Expectant Mothers, Use of Seat

Belts by......................................... 17Exterior, Cleaning the................... 204

Fabric, Cleaning............................. 207Fan, Interior...................................... 86Features, Comfort and

Convenience................................. 85Filling the Fuel Tank..................... 117

CONTINUED

Main Menu ▲ ▼

Index

FiltersOil................................................ 159

Flashers, Hazard Warning.............. 79Flat Tire, Changing a .................... 213Fluids

Brake........................................... 170Clutch........................................ 171Manual Transmission............... 168Windshield Washer................... 167

FM Stereo Radio Reception......... 100Foreign Countries, Driving in...... 249Four-way Flashers........................... 79Front End, Towing by Emergency

Wrecker...................................... 238Fuel.................................................. 116

Fill Door and Cap....................... 117Gauge............................................ 48Octane Requirement................. 116Oxygenated................................ 248Reserve Indicator......................... 46Tank, Filling the......................... 117

Fuel Mileage, Improving............... 121Fuel Station Procedures ............... 117Fuses, Checking the...................... 232

Gasohol........................................... 248Gasoline.......................................... 116

Fuel Reserve Indicator................ 46Gauge............................................ 48Octane Requirement................. 116Oxygenated Fuels...................... 248Tank, Filling the......................... 117

Gauges.............................................. 47Engine Coolant Temperature .... 47Fuel................................................ 48

Gearshift Lever Positions6-speed Manual

Transmission.......................... 133Glass Cleaning............................... 208

Halogen Headlight Bulbs.............. 194Hazard Warning Flashers............... 79Headlights

Daytime Running Lights............. 52High Beam Indicator................... 46High Beams, Turning on............ 51Low Beams, Turning on ............. 51

Reminder Tone............................ 51Replacing Halogen Bulbs ......... 195Turning on.................................... 51

Heating and Cooling System.......... 86High Altitude, Starting at.............. 132High-Low Beam Switch .................. 51High Speed. Shifting at................. 134Hood Latch..................................... 174Hood, Opening the ........................ 118Hot Coolant, Warning about........ 161Hydraulic Clutch............................ 171Hydroplaning.................................. 141

Identification Number,Vehicle........................................ 242

If Your Car has to be Towed........ 238Ignition

Keys............................................... 58Switch............................................ 60Timing Control System............. 251

Indicator Lights, InstrumentPanel.............................................. 43

Inflation, Proper Tire .................... 185Inside Mirror.................................... 79

Main Menu ▲ ▼

Index

Indicator........................................ 43Parking........................................ 198Turn Signal................................. 196

Loading Cargo................................ 124LOCK (Ignition Key Position)....... 60Locks

Anti-theft Steering Column........ 60Fuel Fill Door............................. 117Power Door.................................. 62Trunk............................................ 66

Low Coolant Level......................... 120Lower Gear, Downshifting to a.... 134Low Fuel Indicator.......................... 46Low Oil Pressure Indicator.... 44, 226Lubricant Specifications Chart.... 244Luggage.......................................... 124

Meters, Gauges................................ 47Methanol in Gasoline.................... 248Mirrors, Adjusting........................... 79

New Vehicle Break-in ................... 116Normal Shift Speeds...................... 134NOTICE, Explanation of................... iiNumbers, Identification................ 242

Octane Requirement, Gasoline.... 116Odometer.......................................... 48Odometer, Trip................................ 48Oil

Change, How to ......................... 159Change, When to....................... 146Checking Engine....................... 119Pressure Indicator............... 44, 226Selecting Proper Viscosity

Chart....................................... 157ON (Ignition Key Position)............ 61

Inspection, Tire.............................. 187Instrument Panel............................. 42Instrument Panel Brightness......... 52Interior Cleaning............................ 207Interior Lights.................................. 83Introduction......................................... i

Jacking Up the Car........................ 213Jack, Tire........................................ 213Jump Starting................................. 220

Keys................................................... 58

Label, Certification........................ 242Lane Change, Signaling.................. 53Lap/Shoulder Belts......................... 33Leaking of Exhaust into Car.......... 39Leather, Cleaning.......................... 207Lights

Bulb Replacement..................... 194 CONTINUED

Maintenance................................... 143Owner Maintenance Checks.... 155Record......................................... 153Schedule..................................... 146

Malfunction Indicator Lamp.. 45, 228Manual Transmission.................... 133Manual Transmission Fluid ......... 168

Main Menu ▲ ▼

Index

Opening the Hood ......................... 118Opening the Trunk.......................... 66Operation in Foreign Countries... 249Outside Mirrors............................... 79Overheating, Engine..................... 223Oxygenated Fuels.......................... 248

Paint Touch-up............................... 206Panel Brightness Control............... 52Parking Brake.................................. 80Parking Lights.................................. 51PGM-FI System.............................. 251Polishing and Waxing................... 205Power

Door Locks................................... 62Engine, Specifications............... 244Mirrors.......................................... 79Windows....................................... 69

Pregnancy, Using Seat Belts.......... 17Protecting Adults............................. 12

Additional Safety Precautions.... 18Advice for Pregnant Women...... 17

Protecting Children......................... 19Protecting Larger Children........ 29

Protecting Small Children.......... 26

Radiator Overheating.................... 223Radio Sound System........................ 94Rear End Towing........................... 238Rear Lights. Bulb Replacement... 198Rear View Mirror............................. 79Reclining the Seat-backs................. 68Recommended Shift Speeds ........ 134Recovery Vehicle, Emergency

Towing........................................ 238Reminder Lights.............................. 43Remote Transmitter........................ 63Replacement Information

Air Cleaner................................. 172Engine Coolant........................... 163Engine Oil and Filter................. 159Fuses........................................... 232Light Bulbs................................. 194Schedule..................................... 146Spark Plugs................................. 174Tires............................................ 189Wiper Blades.............................. 180

Replacing Seat Belts After aCrash............................................. 34

Restraint, Child................................ 19Rotation, Tire................................. 188

Safety Belts......................................... 8Safety Defects. Reporting............. 258Safety Labels, Location of.............. 40Safety Messages................................ iiSeat Belt, Additional Information.. 33

Lap/Shoulder Belt....................... 33Seat Belt Maintenance................ 34Seat Belt System Components... 33

Seat Belts............................................ 8Cleaning...................................... 207Maintenance................................. 34Reminder Light and Beeper....... 44System Components.................... 33Use During Pregnancy................ 17

Seats, Adjusting the......................... 68Serial Number................................ 242Service Intervals............................ 146Service Manual.............................. 259Service Station Procedures .......... 117

Main Menu ▲ ▼

Index

ShiftingThe 6-speed Manual

Transmission.......................... 133Side Marker Lights, Bulb

Replacement in.......................... 198Signaling Turns................................ 536-speed Manual Transmission

Checking Fluid Level................ 168Shifting the................................. 134

Snow Tires...................................... 191Solvent-type Cleaners.................... 204Sound System................................... 94Spare Tire

Inflating....................................... 212Specifications............................. 245

Spark Plugs, Replacing................. 174Specifications Charts..................... 244Speed Control................................... 55Speedometer.................................... 47SRS, Additional Information........... 35

Additional Safety Precautions.... 38How the Automatic Seat Belt

Tensioners Work..................... 37How the SRS Indicator

Works........................................ 37How Your Airbags Work............ 35

SRS Components......................... 35SRS Service................................... 38

SRS Indicator Light................... 37, 45START (Ignition Key Position)..... 61Starting the Engine........................ 131

In Cold Weather at HighAltitude................................... 132

With a Dead Battery................. 220Steam Coming from Engine......... 223Steering Wheel

Anti-theft Column Lock.............. 60Stereo Sound System ...................... 94Storing Your Car............................ 202Stuck Car........................................ 236Supplemental Restraint System

Servicing....................................... 38SRS Indicator.......................... 37, 45Tensioners, Seat Belts................ 37

Tachometer...................................... 47Taillights, Changing Bulbs in....... 198Taking Care of the Unexpected ..211Technical Descriptions

Emission Control Systems........ 250

Three Way CatalyticConverter................................ 252

Temperature Gauge........................ 47Tensioners, Seat Belts.................... 37Three Way Catalytic Converter... 251Tire Chains..................................... 191Tire, How to Change a Flat.......... 213Tires................................................ 185

Air Pressure............................... 185Balancing.................................... 188Checking Wear.......................... 188Compact Spare Tire .................. 212DOT Tire Quality Grading....... 246Inflation....................................... 185Inspection................................... 187Replacing.................................... 189Rotating....................................... 188Snow............................................ 191Specifications............................. 245Technical Information.............. 241

Tools, Tire Changing.................... 213

COUNTINUED

Main Menu ▲ ▼

Index

TowingA Trailer, Do Not....................... 141Emergency Wrecker................. 238

Trailer, Do Not Tow a................... 141Transmission

Checking Fluid Level, 6-speedManual Transmission........... 168

Fluid Selection............................ 168Identification Number............... 242Shifting the 6-speed Manual

Transmission.......................... 133Treadwear...................................... 246Trip Meter........................................ 48Trunk................................................. 66

Opening the.................................. 66Open Monitor Light.................... 45

Turn Signals..................................... 53

Underside, Cleaning...................... 208Unexpected, Taking Care

of the........................................... 211Uniform Tire Quality Grading..... 246Unleaded Gasoline......................... 116Upholstery Cleaning...................... 207

Used Oil, How to Dispose of........ 160

Vehicle Dimensions....................... 244Vehicle Identification Number..... 242Vehicle Storage.............................. 202Ventilation......................................... 88VIN.................................................. 242Vinyl Cleaning................................ 207Viscosity, Oil................................... 158

Warning BeepersHeadlights on............................... 51Key in Ignition.............................. 61Seat Belts...................................... 44

WARNING, Explanation of.............. iiWarning Labels, Location of.......... 40Warranty Coverages..................... 257Washer, Windshield

Checking the Fluid Level......... 167Operation...................................... 54

Washing.......................................... 204Waxing and Polishing................... 205

Wheels............................................ 190Alignment and Balance............. 188Cleaning Aluminum Alloys....... 206Wrench....................................... 213

WindowsCleaning...................................... 208Operating the Power................... 69

WindshieldCleaning...................................... 208Defroster...................................... 91

Wipers, WindshieldChanging Blades........................ 180Operation...................................... 53

Worn Tires..................................... 187Wrecker, Emergency Towing...... 238

Main Menu ▲ ▼

Service Information Summary

Gasoline:Premium unleaded gasoline,pump octane number of 91 orhigher.

Fuel Tank Capacity:13.2 US gal (50 l, 11,0 Imp gal)

Recommended Engine Oil:API Service SJ "EnergyConserving" oil, SAE 10W-30viscosity (see page 154).

Oil change capacity (includingfilter):

5.1 US qt (4.8 l,4.2 Imp qt)

6-speed Manual TransmissionFluid:Honda Manual TransmissionFluid preferred, or an API serviceSG, SH or SJ, SAE 10W-30 or10W-40 motor oil as a temporaryreplacement (see page 163).

Capacity:1.6 US qt (1.5 l,1.3 Imp qt)

Brake Fluid:Genuine Honda DOT3 Brake Fluidpreferred, or a DOT 3 or DOT 4brake fluid as a temporaryreplacement (see page 165).

Tire Pressure (measured cold):Front:

32 psi (220 kPa , 2.2 kgf/cm2)

Rear:32 psi (220 kPa , 2.2 kgf/cm2)

Spare Tire Pressure:Front:

60 psi (420 kPa , 4.2 kgf/cm2)

Main Menu ▲ ▼