16
WIPERS WIPERS

WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

Embed Size (px)

Citation preview

Page 1: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

WIPERSWIPERS

Page 2: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

22 (800) 221-36732 (800) 221-3673

1940 Coupe-Sedan shown.

Every component of our wiper tower kits is carefully inspected, hand assembled in our shop and checked for flawless function. Complete assemblies ready to install on wiper motor.

The chrome on our wiper tower base is beautiful and the dimensions are identical to the originals. Includes RH & LH assemblies with mounting hardware.

1937-1940 Car Wiper Tower Kits

7 BIG REASONS why

Bob’s Wiper

Towers keep the beat

wiper SHAFTSPrecision machined

spline & threaded.

7Tower bASeSDie-cast, with triple-plated chrome.

1

drive CHAiNSpecial stair-step chain like original.6

3 drive SproCkeTSDie-cast pivot link for shaft, chain & drive arm.

5

pivoT SHAFTCNC-machined steel.

drive liNkSteel pivot ball cast in sprocket arm.

2

drive ArmSDie-stamped steel. Zinc plated.

4

1937-39 Convertible & Station Wagon 78-17552/3

All Kits Include Mounting Hardware, Tower Base Pads

& Wiper Arm Nuts

Your Choice $175.00 kit

1937-40 wiper SHAFT eNdBob’s wiper towers will accept

Original Style & Style Armsthat use mounting nuts.

Narrow Base

1940 Coupe & Sedan1940-41 Sedan Delivery

01A-17552/3-D

Narrow Base

Wide Base

1940 Convertible & Station Wagon01A-17552/3-C

Page 3: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

333 www.bobdrake.com www.bobdrake.com

wiper ASSemblyPerfect copy of the original assembly. Includes wiper base gaskets, chrome bezels and nuts, drive arm grommets with everything assembled. Can be modified to fit 1941-42 & early 1946 Ford cars and other custom applications (18.5" between tower centers). Ready to install. Accepts original vacuum motor or Drake’s 12-volt electric wiper conversion kit motor.

51A-17500 $175.00 each

Late 1946

1947-48

wiper drive Arm To moTor GrommeT51A-17562 $5.00 each

See page 15

’41

’42-46

Small hole, no need for grommet.

Hole

Mounts on cowl.

Mounts on cowl.

Larger hole, grommet 51A-17562 $5.00 each

Wiper Arm - Adapter BushingThese aluminum machined bushings fit on the end of the tower shafts and are attached with set screws. You must use push-on wiper arms. ”A”K12 1941-48 1/2"K58 Modern Arm 5/8"

Your Choice $8.00 each

Wiper Nut 78-17481 $15.00 pair

Wiper Nut 78-17481

$15.00 pair

Chrome Plated Wiper Knob B-17513 $8.00

See page 14

Chrome Plated Wiper Knob B-17513 $8.00 See page 14

Bezel 78-17515 $10.00 eachSee page 15

Hex Nut

Grommet 11A-17541 $3.00 eachSee page 15

Wiper Shaft has a hole

uses any B- wiper arms, see page 4

Roof Grommet see page 15

LH RH

Typical 1932-37 Wiper Motor

1937-38 Wiper Motors

Typical 1939 Coupe - Sedan

Wiper Assembly(mounts above windshield)

Wiper MysteriesFord’s

B- Wiper cross ref

1/4"

“A”

This wiper assembly uses push-on wiper arms.

Page 4: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

44 (800) 221-36734 (800) 221-3673

Original Hook

Blade Connector

1932-1948 Wiper Arms & Blades

Your Choice $20.00 each

B-17529-A 81/4"

B-17529-B 91/2"

B-17529-X 121/2"$20.00 each 1937-40 Convertible

& Station Wagon1940 Coupe & Sedan

RH or LH01A-17526 $25.00 each

1940-47 Pickup & CommercialRH 01C-17526LH 01C-17527

$25.00 each

1941-48 All BodiesRH 11A-17526LH 11A-17527

$25.00 each

Original Style

Original Style

1937-39 Coupe & Sedan - RH or LH78-17529 $25.00 each

1932-36 All Bodies

NEW IMPROVEMENTNow with more arm &

blade pressure on glass

We are proud to offer our complete line of original style & hot rod wiper arms & blades. They are detail perfect in every respect and will give you years of clean dry windshields.

New from Bob. Custom cut to many sizes. Great for tall T’s to 4" chops.Mounting end fits motors where the wiper shaft has a hole in it. Uses 78-17528-B or 21A-17528 blade to get the perfect custom fit.

Cut to Length and Build Your Own

121/2"

Cut here for size

you need

Bent as original

Bent as original

Wiper Arm Nut 78-17481 $15.00 pair

1932-194081/4" length

1941-19489" length

78-17528-B 1932-40 81/4" length21A-17528 1941-48 9" length

Your Choice $10.00 each

9"81/4"

Our blades have polished stainless steel frames and attaching clips. The difference is in

the rubber. The originals had a stack of die cut hard rubber to form the V blade. Ours is extruded of a softer

rubber and incorporates a “T” guard to protect the windshield glass against possible scratches from the stainless steel edge of wiper blade.

1932-48 Wiper BLades

1937-40 Car & 1937-47 Pickupwiper Arm NUTS

Holds wiper arms to towers. Polished stainless steel.78-17481 $15.00 pair

Wiper Blade cross ref.

1932-36

All our wiper blades

are flat because your

window is flat. No need

for flex-bridge blades.

Page 5: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

555 www.bobdrake.com www.bobdrake.com

Each style mounts to the wiper pivot shafts just like the originals, but use the later style blades which attach more securely. Designed especially for use with higher speed electric wiper systems, the blades offer superior water removal for optimum wet weather visibility. Each kit comes with RH & LH arms and blades.

Original Mounting Ends with Modern Blades1937-1948 Wiper Arm & Blade Kits

YESTERdAY’S STYLE -

TOdAY’S TECHNOLOGY

Specialty Power WindowsWiper System

This push-on style matches original and will fit

1941-48 All Body Styles11A-17526/7-NK

kiTS iNClUde2 Stainless Arms • 2 Stainless Wiper Blades

Arm dimensions shown from center of pivot to blade mounting dimple.

1937-40 Convertible & Station Wagon 1940 Coupe & Sedan

01A-17526/7-NK

1940-47 Pickup01C-17526/7-NK

rUbber wiper blAde reFillSRefills slide in and clip tight in place. Modern edge design offers superior water removal and long life.

78-17528-RF 81/4"21A-17528-RF 9"

$5.00 each

WIPER ARM PIVOT MOUNTING ENDS SAME AS ORIGINAL

NEW IMPROVEMENTNow with more arm &

blade pressure on glass

Bent as original

Bent as original

Wiper Arm Nut78-17481 $15.00 pair

See page 4

Kit includes (2) 81/4" wiper blades

Kit includes (2) 9" wiper blades

Kit includes (2) 81/4" wiper bladesKit includes (2) 81/4" wiper blades

Small clip needs to be pushed in to install and remove wiper arm.

1937-39 Coupe & Sedan78-17526/7-NK

Wiper Blades81/4" - 9"

11A- Style Wiper Arm

Push clip down and

hold.

Dimple

Wiper Blade cross ref.

Wiper arm pivot mounting end same as original.

Wiper arm pivot mounting end

same as original.

Wiper arm pivot mounting end

same as original.

Your Choice $65.00 kit

Page 6: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

66 (800) 221-36736 (800) 221-3673

“A” is the total length including blade

These are simply modified versions of our beautiful, original style stainless arms, each now fitted with our splined mounting bases so they’re perfect for use with the Specialty Wiper Systems shown below. They accept and come with our later style stainless blades offering super secure attachment to the arms. Also perfect for many non-Fords using this system.

Specialty Wiper Arms & Blades

CompleTe rH & lH kiTS2 Stainless Arms • 2 Stainless Wiper Blades

Arm dimensions shown from center of pivot to blade mounting dimple.$65.00 kit

Specialty Power Windows Wiper System

Small clip needs to be pushed in to install and remove

wiper arm.

All wiper arms on this page feature this

style push on end.

DIMPLE

DIMPLE

DIMPLE

8"

FITS DIMPLE ON ARM

81/4" OR 9"

PUSH-ON ENd

WITH NEW SNAP-IN

BLAdE dESIGN

01A-17526/7-SKS 51/4" Arm / 81/4"Blade 105/8"01A-17526/7-SKL 51/4" Arm / 9" Blade 107/8"

11A-17526/7-NKS 9" Arm / 81/4" Blade 143/8"11A-17526/7-NK 9" Arm / 9" Blade 145/8"

01C-17526/7-SKS 8" Arm / 81/4" Blade 133/8"01C-17526/7-SKL 8" Arm / 9" Blade 135/8"

78-17526/7-SKS 71/4" Arm / 81/4" Blade 125/8"78-17526/7-SKL 71/4" Arm / 9" Blade 127/8"

71/4"

51/4"

Wiper Blade cross ref.

Center of wiper arm shaft

“A”

“A”

“A”

“A”

• FITS ALL YEARS

• FITS MANY

NON-FORDS TOO!

DIMPLE

9" “A”

You decideMeasure from the center line of your wiper arm shaft in an arc across your windshield. Find the farthest point without hitting the windshield frame, rubber or the opposite wiper blade.

NEW IMPROVEMENTNow with more arm &

blade pressure on glass

Page 7: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

777 www.bobdrake.com www.bobdrake.com

1937-1939CLOSED CAR

1937-1939CONVERTIBLE & STATION WAGON

1940CLOSED CAR

1940CONVERTIBLE & STATION WAGON

1940-1947PICKUP

1941-1948Car

Wiper Arm Positions

10 Big Reasons Why Bob’s Wiper Arms Are UniqueNo other reproduction wiper arms are made like Bob’s. He uses the same exact design and materials that Ford did. Other makers take big short-cuts in design and quality. Bob’s are made using only the finest components to assure long life and flawless function.

DON’T GET CAUGHT IN THE

RAIN WITHOUT ‘EM!

STAINLESS STEEL RIVETS (strong, won’t rust)

ROLLER BUSHINGS (smooth action)

4. Die-cast CHROME PLATED HOUSING (show quality plating)

5. STAINLESS STEEL COVER (highly polished)

6. STAINLESS STEEL SPRING BAR (nice firm tension)

7. SPACER (added strength)

8. STAINLESS STEEL HOOK END (attaches and allows proper blade wiping angle)

3. STEEL SPLINED INSERT (long life, no slippage)

9. Assembled by Drake

We added more down pressure.

2

13

4

5

6

7

8

9

10

Some other repro wiper arms don’t have the roller bearings. Bob’s are like the originals giving you smooth action.

Unlike some other manufacturers, Bob uses a steel bushing with teeth to match up with the wiper shaft. This will keep it from stripping out.

Page 8: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

88 (800) 221-36738 (800) 221-3673

Original Ford Accessories1932-36 Car

TANdem wiper kiTAn affordable and easy way to get dual wipers which look like the original factory accessory units sold back in the day. Your existing single motor (vacuum or electric) actuates both using the linkage as shown. Kit has 2 arms, 2 blades, passenger side pivot post and cross shaft. Easy to install. Adds value and function.

68-17574 $35.00 kit

THREADEDSWIVEL

PIVOT POST

CROSS SHAFT

ORIGINALHOOKSTYLE

Original

Accessory

THREADEDSWIVEL

UniversalHANd wiper ASSembly

An excellent option for adding a wiper to closed or open cars where mounting space is limited. This old-school setup offers simplicity and dependability with no possible electrical failure and few moving parts. It’s unlimited wiper speed and park position is all up to the operator!

HR-17655-AR $25.00 each

1940wiper moTor & CoNTrol

1941-48CAble & wiper moTor SwiTCHeS

vACUUm

CAble

OriginalStyle

Examples of

original parts from

Bob’s Collections

Page 9: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

999 www.bobdrake.com www.bobdrake.com

1928-1936 Open Car, 1928-1939 Closed Car & PickupCompACT 12 volT "miGHTy wiper" moTorS

An excellent upgrade from the original vacuum units. Features adjustable arm-park and 32" power supply lead. Choose either straight drive shaft or threaded tapered drive shaft. Includes wiper arm nut, drive shaft bezel bushing, fuse and connector socket with complete installation instructions. A real problem solver in adding dependability and safety. Easy to install.

Use with above MW-17508-T Wiper Motor Kit

MightyWiper

Electric Wiper Motors

1932-36 Open Car1932-39 Closed Car & Pickup (with modification)

12-volT wiper moTor kiTBuffed stainless steel cover. Designed to use your remote switch. Includes stainless arm & blade. 1932-39 closed car & pickup requires modification for mounting.

A-17508-SS $50.00 kit

1932-36 Open Car1932-39 Closed Car & Pickup (with modification)

6 or 12-volT wiper moTorSingle speed unit with black painted steel cover. On-off switch is mounted on the back of unit. 1932-39 closed car & pickup requires modification for mounting. A-17508-E6 6-Volt A-17508-E12 12-Volt

$50.00 each Works with our Mighty Wiper Straight Shaft Arm & Blade Kit (HR-70127) below, or for the original style arm and blade:

Wiper Blade78-17528-B 81/4" length21A-17528 9" length

$10.00 each

Wiper ArmB-17529 1932-36 $20.00 each

moTor wiTH THreAded TApered drive SHAFTFeatures threaded shaft with chrome arm nut. Use

with our MW-17526-K arm and blade kit shown below.MW-17508-T $140.00 each

moTor wiTH STrAiGHT drive SHAFTUse with our HR-70127 Wiper Arm and

Blade made specially for this application.MW-17508-S $140.00 each

Use with above A-17508-E6/E12 or MW-17508-S Wiper Motor Kits

miGHTy wiper STrAiGHT SHAFT Arm & blAde kiT7.5" long arm holds 11" long blade (can be trimmed). Each features all polished stainless steel construction with a strong tension spring for years of trouble-free use and super clean wiper action.

HR-70127 $20.00 kit

miGHTy wiper THreAded SHAFT Arm & blAde kiT

Old school looks with modern function. 1940 original style chrome pivot head with polished stainless arm. Comes with our all-stainless modern-style 81/4" blade fitted with high-quality rubber for easy replacement and dependability.

MW-17526-K $35.00 kit

MW-17508-S

Straight shaft78-17481

$15.00 each

MW-17508-T

Tapered shaft2"

3/8" Threads

11/2"11/2"

4"

Original Hook Style

Uses original

nut.

Page 10: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

1010 (800) 221-367310 (800) 221-3673

pUSH-oNWe offer (3)

style lengths.See 4, 5, & 6

wiper Arm SHAFT

Small clip needs to be pushed in to install and remove

wiper arm.

wiper Arm NUT

Clip-oNWe offer (3)

style lengths.See page 4

SCrew-oNWe offer (3)

style lengths.See page 4 & 5

wiper moTor SHAFT

HOLE

CLIP

Specialty Power Windows

Wiper Systems

78-17481 $15.00 pair

’32-36’37-40 ’41-48

1932-194081/4" length

1941-19489" length

78-17528-B 1932-40 81/4" length21A-17528 1941-48 9" length

Your Choice $10.00 each

9"81/4"

Our blades have polished stainless steel frames and attaching clips. The difference is in

the rubber. The originals had a stack of die cut hard rubber to form the V blade. Ours is extruded of a softer

rubber and incorporates a “T” guard to protect the windshield glass against possible scratches from the stainless steel frame.

1932-48 Wiper BLades

Original Hook Style Blade

Original Original

Original

Wiper Arm - Adapter BushingThese aluminum machined bushings fit on the end of the tower shafts and are attached with set screws. You must use push-on wiper arms. ”A”K12 1941-48 1/2"K58 Modern Arm 5/8"

Your Choice $8.00 each

1/4"

“A”

Page 11: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

111111 www.bobdrake.com www.bobdrake.com

I DON’T GET IT, SAM. WHAT’S SO GREAT ABOUT BOB'S NEW WIPER ARMS & BLADES?

Look Dudley, The old fashioned hook end is gone. It’s the same beautiful arm but now it has a snap-in modern end.

CLEAN SWEEP

Wow! Here’s the blade. It looks pretty nifty.

The real treat is that the arm locks the blade in place to keep it rigid so the rubber acts like a squeegee.

Right! It’s a no hassle job. The clip is plastic so it doesn’t hurt yourfingers.

This refill is cool. I can change it just like on my new Ford.

1. WIPER ARM - These are basically the same high quality, original style, polished stainless arms that we have been making for many years right here in the good ol’ U.S.A. We changed the end a little to accept our new smooth action. blades.

3. WIPER ARM END BOSS - The raised boss locks tightly into the pivot head on the blade, allowing no side motion, making the arm and blade a solid unit for effective wiping action.

4. WIPER BLADE BODY - Super clean, low profile, all stainless construction. Rib design adds strength and good looks. Some manufacturers use bridge type tensioners on their blades to conform to curved glass which adds height. All 1932-1948 Fords have flat windshields so there is no need for those ugly bridges.

5. PIVOT HEAD - Polished stainless for good looks. Strong spring action locks securely onto arm. Will fit any of Bob’s New “Snap-In Style” arms.

6. RIVET HEAD - We carefully install a Stainless Steel tubular rivet to insure the head is up and lookin’ good when the wipers are in the park position. We also do the same on the arm; creating a RH and LH assembly. It’s just our extra attention to detail.

RUBBER REFILL - Quick change refill that snaps into place - no need for pliers and gloves. These are easy on the fingers. You don’t have to replace the whole blade just the low-buck refill.

2 Sizes available. Both will fit new snap-in style blades.

$5.00 each

2. WIPER ARM MOTOR MOUNTING END - The other end of our new arm still fits your original wiper tower or wiper motor shaft so in a jiffy you can switch from the “Rain Beater Snap-In Style" for go, to the “Original Hook-In Style” for show.

7. WIPER RUBBER - Installed for you in the metal blade is a precision formed rubber blade featuring a sharp wiping edge for greater efficiency and long life.

78-17528-RF1937-1940

8¼"

21A-17528-RF1941-1948

9"

THe arM

THe MeTaL BLade1937-1939 SHOWN

2 LENGTHS: 8¼" & 9"

THe rUBBer

See page 5

See page 5

Page 12: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

1212 (800) 221-367312 (800) 221-3673

12-volT, 2-Speed wiTH SwiTCHDesigned to easily replace the original, sluggish vacuum-drive units. Each kit features our super dependable, 2-speed electric wiper motor with switch, our custom engineered mounting brackets and hardware. These easy-to-install kits use the original motor location and attach to your original wiper linkage. Detailed installation instructions included.

Make wet weather driving safer and more enjoyable.

by

1940 All Body StylesHeavy duty 2-speed, automatic park.

01A-17508-E12 $200.00 kit

1940-48 Ford CarElectric Wiper Conversion Kits

You’ll remove both, the original wiper motor and its mounting bracket from the interior side of the firewall, beneath the dash panel.

Great for ’32-39 Coupes & Sedans12-volT wiper SySTemS

This is the most adaptable universal system that we have ever seen. The flex cable and transmissions work together like a rack and pinion system. The motor itself is mounted remotely under the dash or behind the kick panel or wherever space is available, giving you many options.

• Mount wipers overhead like the original 1932-1939 or put them in the cowl.

• Great replacement in 1941-48 cars where the original equipment is missing.

• Adjustable sweep of 90° to 160°. • You set the park position: inboard, outboard, right side

or left side.• Tell your buddy with the Chevy or Willys that these will

work for them too, fiberglass or steel cars. • Comes with written instructions and a DVD

showing actual installation.

SpeCiAlTy wiper SySTemSB-17508-A With 2-speed switch $285.00B-17508-B With Delay switch $325.00

THIS SYSTEM USES THE ABOVE BLADES & ARMS

12-VOLTMOTOR

CAMDRIVE ARM

WIRING

DELAY SWITCH(Optional)

FLEX CABLE

(2) TUBESTO HOLD

FLEX CABLES

2-SPEEDSWITCH

(2)TRANSMISSIONS

MOUNTING BOX

Specialty Wiper Systems Specialty Power Windows Wiper System

Page 13: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

131313 www.bobdrake.com www.bobdrake.com

I want wiper towers like the ’40 Passenger

1946-48 All Body StylesDesigned for use with original

radio and dash accessories. 51A-17508-E12

$200.00 kit

1941-42 All Body StylesHeavy duty 2-speed with

automatic park. Not designed for use with

original 1941 radio. 11A-17508-E12

$200.00 kit

01C-17508-K $375.00 kit

Complete instructions & templates included

A

J, K

B

C

D E

F

GH

I

G: (2) Wiper Blades 8-1/4"H: (2) Wiper Arms (Pair)I: (1) Pre-wired 2-Speed SwitchJ: (7) 1/4"-20 x 3/4" Hex BoltsK: (7) 1/4" Lock Washers

A: (1) 12V Motor & BracketB: (1) Spindle Platform Assembly & HardwareC: (1) Dash to Firewall Mounting BracketD: (2) Wiper Towers with Pads, 2 Drive Arms E: (4) Drive Arm Washers (2 black & 2 clear)F: (1) Drive Arm Spring Clip (fastens drive arms)

CompleTe kiT iNClUdeS:

1940-47 Pickup12-volT, 2-Speed TANdem wiper kiT

Premium quality kit with specially engineered components made to add factory style cowl-mount tandem wipers to these extremely popular trucks. Smooth function and beauty just like the cars came with. Our kit has been carefully designed with the right parts and hardware including complete, clear instructions so you can easily install with great results.

Passenger Car

function & looks

for your Pickup!

Page 14: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

1414 (800) 221-367314 (800) 221-3673

Wiper KnobsEach is exact shape and color. Note: 1932-36 knobs are chrome; 1937-48 are plastic. 1938-39 plastic Closed Car knobs are screw-on type with threads. 1937-1939 Convertible & Station Wagon, & 1940-1948 knobs are push-on.

B-17513 81A-17513-A78-17513-B 91A-17513-A81A-17513-B 01A-17513-A 01A-17513-B91A-17513-B

21A-17513-A 21A-17513-B 51A-17513-A 21C-1751351A-17513-B 51A-17513-C11A-17513 09A-17513

B-17513 1932-36 All & 1937 Coupe & Sedan Chrome screw-on

78-17513-B 1937 Deluxe Convertible & Station Wagon Yellow-Brown push-on

81A-17513-A 1938 All Closed Cars Ivory screw-on

81A-17513-B 1938 Convertible & Station Wagon Ivory push-on

91A-17513-A 1939 Coupe, Sedan & Sedan Delivery Light Yellow screw-on

91A-17513-B 1939 Convertible & Station Wagon Light Yellow push-on

01A-17513-A 1940 Standard All Bodies & 1940-1941 Pickup Sand push-on

01A-17513-B 1940 Deluxe All Bodies Maroon push-on

11A-17513 1941 Special, Deluxe & Super Deluxe, Coupe, Sedan, Convertible & Station Wagon Tan push-on

21A-17513-A 1942 Special Coupe & Sedan Maroon push-on

21A-17513-B 1942 Deluxe, Super Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Butterscotch push-on

51A-17513-A 1946 Deluxe Coupe & Sedan Chocolate push-on

51A-17513-B 1946 Super Deluxe Coupe, Sedan & Sedan Delivery Blue-Gray push-on

51A-17513-C1946 Super Deluxe, Convertible, Station Wagon, Sportsman, 1947-48 Deluxe, Super Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery & Sportsman

Gray-Tan push-on

09A-17513 1940 Coupe, Sedan & Convertible Dark Blue push-on

21C-17513 1942-47 Pickup & Commercial Black push-on

These are switch assemblies which mount in the center of the upper dash and go through a lot of wear and tear over the years. They are constructed to match the originals perfectly. Each switch is complete with sleeve, nut and wiper knob. Use specified part numbers below when ordering. Note: 1937-39 are for Convertibles and Station Wagons only.

01C-17535

21C-17535

Pickup &

Commercial

Original Style

Original Style

Wiper Controls with Knobs

78-17535 1937 Convertible & Station Wagon Yellow-Brown

81A-17535 1938 Convertible & Station Wagon Ivory

91A-17535 1939 Convertible & Station Wagon Light Yellow

01A-17535-A 1940 Standard, Coupe, Sedan & Station Wagon Sand

01A-17535-B 1940 Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Maroon

51A-17535-B 1946 Super Deluxe Coupe & Sedan Blue-Gray

51A-17535-C1946 Super Deluxe Convertible, Sportsman & Station Wagon, 1947-48 All Body Styles

Gray-Tan

01C-17535 1940-41 Pickup Sand

21C-17535 1942-47 Pickup Black

51A-17535-C51A-17535-B78-17535 01A-17535-A91A-1753581A-17535 01A-17535-B

Fordy Style Knob & Collar Polished 01A-9270-SR Black 01A-9270-SRB

$7.50 each

Mercury Style Knob & Collar Polished 09A-9270-SR Black 09A-9270-SRB

$7.50 each

2-Speed Wiper SwitchTurn-knob style, 4 push-on tab connector terminals. 6 or 12 volt.HR-60760-SW $15.00 each

Your Choice$45.00 each

Your Choice$8.00 each

Page 15: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

151515 www.bobdrake.com www.bobdrake.com

1939-48wiper HoSe/FirewAll GrommeTSUse the right grommets for your projects!

91A-17545 1939 $2.00 each01A-17545-A 1940 Convertible $2.00 each01A-17545-B 1940-48 Closed Car $2.00 each21C-17265 1942-47 Pickup $4.00 each

1937-48wiper Clip & SpriNG

Holds wiper drive arms to motor. 78-17450 1937-40 All bodies 11A-17450 1941-48 All bodies

$5.00 each

1947-48 Coupe, Sedan & Convertiblewiper SHAFT pivoT NUTSpecial machined, chrome plated.356094-S $6.00 each

1946-48wiper drive Arm To moTor GrommeT

Prevents slop in wiper system. 2 required.51A-17562 $5.00 each

1937-40wiper Tower pAdS

Pressure-molded black rubber fits between cowl & wiper tower. Seals out water and reduces noise from wiper system.

78-17556 1937-40 Convertible & Station Wagon01A-17556 1940 Closed Car & 1941 Sedan Delivery

$10.00 pair

78-17556 01A-17556

Wiper Components & Miscellaneous

Original Style 78-17537

01A-17537

78-17577 Grommet

1937-40wiper CoNTrol rodS

Rod connects wiper switch to vacuum motor. Dimensionally correct for easy installation. Grommet included.

78-17537 1937-40 Convertible & Station Wagon $10.00 each01A-17537 1940 All Closed Cars (except wagon) $10.00 each78-17577 1937-40 Wiper Control Grommet $1.00 each

1932-48wiper moTor SHAFT To rooF GrommeT

This rubber grommet seals and prevents leakage where wiper shaft extends through body.40-17541 1932-34 Coupe & Sedan, rubber $3.00 each48-17541 1935-36 Coupe & Sedan, rubber $3.00 each11A-17541 1937-39 Coupe & Sedan, leather

1941-46 Couple & Sedan 1939-47 Pickup $3.00 pair

7C-17541 1947-48 Coupe & Sedan, leather1948-52 Pickup $3.00 pair

40-17541 SHOWN

1937-48wiper moTor SHAFT beZelS

Each is a perfect match to the originals. Excellent chrome-plating.

1937-39 Coupe & Sedan

78-17515 $10.00 each

1947-48 Coupe, Sedan & Convertible7C-17515 $15.00 each

1941-46 Coupe & Sedan

11A-17515 $20.00 pair

Page 16: WIPERS - Bob Drake Reproductions, Inc. · PDF file(mounts above windshield) Ford’sWiper Mysteries ... An affordable and easy way to get dual wipers which look like the original factory

Ford Cars 1932-48 Ford Pickups 1932-66

1819 N.W. Washington Blvd Grants Pass, Oregon 97526 Wiper Flyer 2013

(800) 221-3673 • Fax: (541) 474-0099 • www.bobdrake.comNew Parts for old Fords & Hot Rods

WIP-13®

© 2013 Bob Drake Reproductions, Inc.

Call Our Friendly Sales Staff Today !

Our Wipers Fit Some Non Fords Too!

Have Wiper

Questions?

A Mini-Catalog of

Wiper Arms, Blades& Related Products

A bit of memorabilia from Bob’s collection