WinToFlash Guide - Install Windows XP From USB Flash Drive

WinToFlash Guide - Install Windows XP from USB Flash drive http://www.komku.org/2009/09/wintoflash-guide-install-windows-xp.html

1 of 10 3/13/2013 11:04 PM


2 of 10 3/13/2013 11:04 PM


3 of 10 3/13/2013 11:04 PM

Step 10:

Specify locations of files and drive

Click Next button...

Step 11:

Select "I Accepted the terms of the license agreement" then click

Continue...

Step 12:

Warning! Formatting will erase ALL DATA on target disk. To format

press OK, to quit press Cancel

Click OK...


4 of 10 3/13/2013 11:04 PM


5 of 10 3/13/2013 11:04 PM

Step 2:

Turn on your laptop then hit F2 rapidly (or Del for some other machine)

then go to Boot tab > change boot order > then hit F10 key to Save and

Exit

Now you can boot from USB Flash drive, first select

1st, text mode setup (Boot from flash again after finished)

then... on the first restart, select

2nd, GUI mode setup, continue setup + 1st start of Windows

Install Windows XP as usual...

Good luck...

please let me know if you find a problem...

and help the Author by report any application bug (and spelling too)


6 of 10 3/13/2013 11:04 PM

UPDATE 1:

How to Install Windows 7 from USB Flash Drive / Flash Disk / Thumb

Drive / Pen Drive

UPDATE 2:

Anonymous said…

first i wanna say thank you for everybody in this forum,after trying

many time i had come out a solution, or maybe saying a sharing

season for everyone, hope can help other that is still tension with it

haha....actually im the guy previously anonymous asking so many

question

Hello everybody, before I had successfully install window Xp using

wintoflash, I had facing many problem. Here I wish to share my

experience using the wintoflash.

Netbook: Hp mini (come with window 7 starter edition)

Step1:

Having your window Xp installer disc, by using the wintoflash

software, make a bootable USB flash drive.

Recommendation –choose advance option, at the format tab, under file

system choose FAT 16 LBA (previous I had choose FAT 32 LBA, during

booting from USB flash drive an error will occur, so try using FAT 16

LBA first if can’t try using other format will solve the problem).

Step2:

If your laptop comes with original window, it most probably has made

a recovery partition for you. From my experience, I recommend this

partition should be deleted, if not it will cause other problem (boot

problem, hal.dll error) during the reinstall of window.

First choose the first option, you will be able to go to the window

installation (create partition, delete partion page).

Recommendation--- deleted all the partition that set previously, than

only create your own partition.

Step 3:

At this stage after u had created your partition, and install the window

at the partition that u had select. The window will be restart

automatically for the first time. After restart, the window won’t

startup and continues the window installation; this time u need boot

the flash drive again and choose the 2nd option. If any error (eg.

Hal.dll) occur, try using the other option that had stated.

Step4:

By now this window will continue the installation. After finis the

installation, window is now functioning. BUT in this state, you will

probably facing a problem that the window can’t boot from the HDD,

although the 1st priority had been set at the BIOS to boot from hard

disk. For me every time I need to startup into window I need to boot

from the flash drive.

Solution---- try using window recovering console, this really help…ok

sharing seasons again. As for me, I can boot the recovering console at

the window setup page, the solution is I login into window by using my

flash drive first, and I make an virtual drive(can be using power ISO)

and load the window xp cd (cause hp mini netbook don’t hv cd room)

so this step had to be done.

In order to install the window recovering console u can go

http://support.microsoft.com/kb/314058 and

http://support.microsoft.com/kb/307654

If you have the recovering console the previous step can be skip.

After the console had been install by using the method above, the

window recovering console will be able to choose after the system is


7 of 10 3/13/2013 11:04 PM


8 of 10 3/13/2013 11:04 PM

232 comments

Discussion Community #Share

• Reply •

Gagan Deep • 6 months ago

after the text mode i start gui and it first says restarting setup and says a error

" win32lasterror 14001 " man this error is making me mad......:( give it a solution quick

response needed :) 1

• Reply •

arungisyadi • 2 months ago> Gagan Deep

win32lasterror 14001 mostly caused by missing installation file(s). Try to

use a CD image or rip your windows CD to a CD Image then use that instead of

from your CD ROM Drive as optical is so unreliable nowdays. 0

• Reply •

Anonymous • a year ago

I try this repeatedly but this is the error message:

"A problem has been detected and windows has been shutdown to prevent damage to

your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this

screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard

drive controllers. Check your hard drive to make sure it is properly configured and

terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your

computer.

Technical information:

*** STOP: 0x0000007B (0xF7A88524, 0xc0000034, 0x00000000, 0x00000000)

Kenneth

[email protected] 1

• Reply •

Corny • 21 days ago> Anonymous

this could be a hardware problem. mebe ur hdd. u might need to replace

them then try again. 0

• Reply •

cyber • 2 months ago> Anonymous

WinToFlash is SHIT,,,,,,, rather than move the boot from the CD/DVD to

usb. better to use a CD/DVD... WinToFlash can not copy fille boot, can

not make partition... WinToFlash is VIRUS..... BOOT IN

[Boot Loader]

Timeout=30

Default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS

[Operating Systems]

C:\$WIN_NT$.~BT\BOOTSECT.DAT = "1st, text mode setup (Boot from flash

again after finished)"

multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="2nd, GUI mode setup, continue

setup + 1st start of Windows" /fastdetect

C:\ = "---> DEBUG, in case of HAL.DLL or NTOSKRNL.EXE not found errors <---"

multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="Debug boot rDisk 1 partition 2"

/fastdetect


/fastdetect


/fastdetect 0

Anonymous • 5 months ago

1★

see moreShare ›

Share ›

Share ›

Share ›

Share ›


9 of 10 3/13/2013 11:04 PM

Newer Post Older PostHome

Subscribe to: Post Comments (Atom)

© Komku.org - Privacy - Disclaimer - About - DMCA - Contact - Sitemap - Powered by Blogger


10 of 10 3/13/2013 11:04 PM

Documents

WinToFlash Guide - Install Windows XP From USB Flash Drive