Note: All information enclosed in this datasheet is based on our best knowledge and is given as indicative. Other special requirements are subject to prior discussion and approval of Vojay. Please contact us for any additional information or request.

ER316L Stainless and heat resistant steel

WELDING CONSUMABLESAWS A5.9: ER316LEN 12072: 19 12 3 LW.N.: 1.4430

ER316L

ER316L is austenitic stainless steel type material of the same chemical composition as ER316 except lower carbon content in order to reduce the possibility of formation of intergranular carbide precipitation.

Suitable for welding of austenitic CrNiMo steels. Resistant to intergranular corrosion up to 400°C and general corrosion conditions. Especially used in welding chemical tanks, pipes and equipments which are used in chemical, petrochemical, paint, textile, paper and shipbuilding industries, etc.

C Mn Si S P Ni Cr Mo Cu

≤0.03 1.00-2.50 0.30-0.65 ≤0.03 ≤0.03 11.00-14.00 18.00-20.00 2.00-3.00 ≤0.50

3. Chemical composition %

4. Mechanical properties, all weld metal

Heat treatment

Yield Strength,R (MPa)p0.2

Tensile Strength,R (MPa)m

Elongation,A (%)

Impact Energy ISO-V(J)

+20°C -120°C

AW ≥400 ≥550 ≥35 ≥65 ≥47

Process Diameter, mm

Box5-10 kg

D100 1 kg

D2005 kg

D30015 kg

BS30015 kg

K30015 kg

Coil25-40 kg

Drum100-300 kg

GTAW 1.00 - 5.00 x

GMAW 0.60 - 2.00 x x x x x x x

5. Available size and packaging

MATERIAL DATASHEET ER316L

Rev.: VJ-03/2015www.vojay-group.comVOJAY

Group

GTAW I1 Inert gas Ar (100%)

GMAW

M12 Mixed gas Ar + 0÷5% CO2

M13 Mixed gas Ar + 0÷3% CO2

1. Shielding gases (acc. EN ISO 14175)

2. Welding positions

PA PB PC PD PE PF PG

* Customer packing on request.