8
www.bptfittings.com RAINTIGHT FITTINGS RAINTIGHT DONE RIGHT.

WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Embed Size (px)

Citation preview

Page 1: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Printed in the U.S.A.© 2009 Bridgeport Fittings, Inc. All rights reserved.

Distributed by:

Bridgeport Fittings, Inc.705 Lordship Blvd.Stratford, CT 06615-7313

Voice: 203.377.5944Fax: 203.381.3488E-mail: [email protected]

www.bptfittings.com

3/09 7500 BP078Cert no. XX-XXX-XXXXXX

lithographics

fpo

Raintight in all the sizes andconfigurations you need

Whatever the size and whatever the configuration,

Bridgeport has the raintight solution. You can get Bridgeport

innovations for cable, EMT and rigid conduit, with more

choices in 1/2” to 4” trade sizes. Our separate sealing

rings ensure a raintight seal and split-type compression

rings make for fast, reliable installation. With Bridgeport

UL-Listed raintight fittings, you can meet any code

and fill any specification. Bridgeport quality shines on

even the rainiest days.

Complete solutionsin zinc, steel andaluminum

ConsultBridgeport Catalog

WE ENGINEERED THE WATER OUT BYENGINEERING THE QUALITY IN

FIELD REACTION TO BRIDGEPORT RAINTIGHT

OTHER RAINTIGHT PRODUCTSCORD GRIP SOLUTIONS

UL REQUIREMENTSEffective March 2002, UL implemented a specification revision that caused

industry standard split ring compression connectors to be incapable of

passing UL testing. Bridgeport solved this design issue and became the

industry’s first manufacturer to meet the more stringent UL follow-up test

requirements, thereby ensuring their products consistently and effectively

excluded water. This allowed Bridgeport to mark their fittings “Raintight.”

Some manufacturers have elected to color code their raintight gland

nuts for identification purposes. A few manufacturers, including

Bridgeport, have chosen the color blue for their steel EMT raintight

fittings. Exclusive to Bridgeport is the use of the color blue on their

zinc compression raintight fittings.

“Having an easy way to visually identify isimportant. Inspectors in the Cities of Glendale,AZ and Phoenix, AZ are enforcing the NECrequirement for raceways in a wet location.”

Greg Wallace, President GWI Electric, Glendale Arizona

“In addition to being blue in color, Bridgeport’sUL Listed EMT fittings have the word Raintightcast into the fitting body, which makes it easy toconfirm the right fittings are being used.”

Bob White, Project Manager Rizzo Corporation,Danbury Connecticut

www.bptf itt ings.com

RAINTIGHT FITTINGS

RAINTIGHT DONE RIGHT.

NEC® REQUIREMENTSThe National Electrical Code® (NEC) provides requirements and

recommendations that govern this country’s wiring practices and

electrical installations. NEC articles and sections that detail the

use of conduit and cable products in a wet location are listed below.

NFPA 70®, National Electrical Code® and NEC® are registered trademarks of theNational Fire Protection Association, Quincy, MA.

NEC Articles358.42 Couplings and Connectors used with EMT shall be made up

tight. Where buried in masonry or concrete, they shall be concretetight

type. They shall be listed for use in wet locations and comply with

Article 314.15.

344.42 Couplings and Connectors. (A) Threadless couplings and

connectors used with conduit shall be made tight. Where buried in

masonry or concrete, they shall be the concretetight type. Where

installed in wet locations, they shall comply with 314.15. Threadless

couplings and connectors shall not be used on threaded conduit ends

unless listed for the purpose.

314.15 Damp or Wet Locations. In Damp or Wet Locations boxes,

conduit bodies, and fittings shall be placed or equipped so as to

prevent moisture from entering or accumulating within the box, conduit

body, or fitting. Boxes, conduit bodies, and fittings installed in wet

locations shall be listed for use in wet locations.

330.40 Boxes and Fittings. Fittings used for connecting Type

MC cable to boxes, cabinets, or other equipment shall be listed

and identified for such use.

Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007,National Fire Protection Association, Quincy, MA 02169. This reprinted material is notthe complete and official position of the NFPA on the referenced subject, which isrepresented only by the standard in its entirety.

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 1

Page 2: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Printed in the U.S.A.© 2009 Bridgeport Fittings, Inc. All rights reserved.

Distributed by:

Bridgeport Fittings, Inc.705 Lordship Blvd.Stratford, CT 06615-7313

Voice: 203.377.5944Fax: 203.381.3488E-mail: [email protected]

www.bptfittings.com

3/09 7500 BP078Cert no. XX-XXX-XXXXXX

lithographics

fpo

Raintight in all the sizes andconfigurations you need

Whatever the size and whatever the configuration,

Bridgeport has the raintight solution. You can get Bridgeport

innovations for cable, EMT and rigid conduit, with more

choices in 1/2” to 4” trade sizes. Our separate sealing

rings ensure a raintight seal and split-type compression

rings make for fast, reliable installation. With Bridgeport

UL-Listed raintight fittings, you can meet any code

and fill any specification. Bridgeport quality shines on

even the rainiest days.

Complete solutionsin zinc, steel andaluminum

ConsultBridgeport Catalog

WE ENGINEERED THE WATER OUT BYENGINEERING THE QUALITY IN

TESTIMONIALS

OTHER RAINTIGHT PRODUCTSCORD GRIP SOLUTIONS

UL REQUIREMENTSEffective March 2002, UL implemented a specification revision that caused

industry standard split ring compression connectors to be incapable of

passing UL testing. Bridgeport solved this issue by developing a patented

EMT raintight design and became the industry’s first manufacturer to

meet the more stringent UL follow-up test requirements, thereby ensuring

their products consistently and effectively excluded water. This allowed

Bridgeport to mark their fittings “Raintight.”

Some manufacturers have elected to color code their raintight gland nuts

for identification purposes. A few manufacturers, including Bridgeport, have

chosen the color blue for their steel EMT raintight fittings. Exclusive to

Bridgeport is the use of the color blue on their zinc EMT raintight fittings.

“Having an easy way to visually identify isimportant. Inspectors in the Cities of Glendale,AZ and Phoenix, AZ are enforcing the NECrequirement for raceways in a wet location.”

Greg Wallace, President GWI Electric, Glendale Arizona

“In addition to being blue in color, Bridgeport’sUL Listed EMT fittings have the word Raintightcast into the fitting body, which makes it easy toconfirm the right fittings are being used.”

Bob White, Project Manager Rizzo Corporation,Danbury Connecticut

www.bptf itt ings.com

RAINTIGHT FITTINGS

RAINTIGHT DONE RIGHT.

NEC® REQUIREMENTSThe National Electrical Code® (NEC) provides requirements and

recommendations that govern this country’s wiring practices and

electrical installations. NEC articles and sections that detail the

use of conduit and cable products in a wet location are listed below.

NFPA 70®, National Electrical Code® and NEC® are registered trademarks of theNational Fire Protection Association, Quincy, MA.

NEC Articles358.42 Couplings and Connectors used with EMT shall be made up

tight. Where buried in masonry or concrete, they shall be concretetight

type. They shall be listed for use in wet locations and comply with

Article 314.15.

344.42 Couplings and Connectors. (A) Threadless couplings and

connectors used with conduit shall be made tight. Where buried in

masonry or concrete, they shall be the concretetight type. Where

installed in wet locations, they shall comply with 314.15. Threadless

couplings and connectors shall not be used on threaded conduit ends

unless listed for the purpose.

314.15 Damp or Wet Locations. In Damp or Wet Locations boxes,

conduit bodies, and fittings shall be placed or equipped so as to

prevent moisture from entering or accumulating within the box, conduit

body, or fitting. Boxes, conduit bodies, and fittings installed in wet

locations shall be listed for use in wet locations.

330.40 Boxes and Fittings. Fittings used for connecting Type

MC cable to boxes, cabinets, or other equipment shall be listed

and identified for such use.

Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007,National Fire Protection Association, Quincy, MA 02169. This reprinted material is notthe complete and official position of the NFPA on the referenced subject, which isrepresented only by the standard in its entirety.

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 1

Page 3: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Printed in the U.S.A.© 2009 Bridgeport Fittings, Inc. All rights reserved.

Distributed by:

Bridgeport Fittings, Inc.705 Lordship Blvd.Stratford, CT 06615-7313

Voice: 203.377.5944Fax: 203.381.3488E-mail: [email protected]

www.bptfittings.com

3/09 7500 BP078Cert no. XX-XXX-XXXXXX

lithographics

fpo

Raintight in all the sizes andconfigurations you need

Whatever the size and whatever the configuration,

Bridgeport has the raintight solution. You can get Bridgeport

innovations for cable, EMT and rigid conduit, with more

choices in 1/2” to 4” trade sizes. Our separate sealing

rings ensure a raintight seal and split-type compression

rings make for fast, reliable installation. With Bridgeport

UL-Listed raintight fittings, you can meet any code

and fill any specification. Bridgeport quality shines on

even the rainiest days.

Complete solutionsin zinc, steel andaluminum

ConsultBridgeport Catalog

WE ENGINEERED THE WATER OUT BYENGINEERING THE QUALITY IN

TESTIMONIALS

OTHER RAINTIGHT PRODUCTSCORD GRIP SOLUTIONS

UL REQUIREMENTSEffective March 2002, UL implemented a specification revision that caused

industry standard split ring compression connectors to be incapable of

passing UL testing. Bridgeport solved this issue by developing a patented

EMT raintight design and became the industry’s first manufacturer to

meet the more stringent UL follow-up test requirements, thereby ensuring

their products consistently and effectively excluded water. This allowed

Bridgeport to mark their fittings “Raintight.”

Some manufacturers have elected to color code their raintight gland nuts

for identification purposes. A few manufacturers, including Bridgeport, have

chosen the color blue for their steel EMT raintight fittings. Exclusive to

Bridgeport is the use of the color blue on their zinc EMT raintight fittings.

“Having an easy way to visually identify isimportant. Inspectors in the Cities of Glendale,AZ and Phoenix, AZ are enforcing the NECrequirement for raceways in a wet location.”

Greg Wallace, President GWI Electric, Glendale Arizona

“In addition to being blue in color, Bridgeport’sUL Listed EMT fittings have the word Raintightcast into the fitting body, which makes it easy toconfirm the right fittings are being used.”

Bob White, Project Manager Rizzo Corporation,Danbury Connecticut

www.bptf itt ings.com

RAINTIGHT FITTINGS

RAINTIGHT DONE RIGHT.

NEC® REQUIREMENTSThe National Electrical Code® (NEC) provides requirements and

recommendations that govern this country’s wiring practices and

electrical installations. NEC articles and sections that detail the

use of conduit and cable products in a wet location are listed below.

NFPA 70®, National Electrical Code® and NEC® are registered trademarks of theNational Fire Protection Association, Quincy, MA.

NEC Articles358.42 Couplings and Connectors used with EMT shall be made up

tight. Where buried in masonry or concrete, they shall be concretetight

type. They shall be listed for use in wet locations and comply with

Article 314.15.

344.42 Couplings and Connectors. (A) Threadless couplings and

connectors used with conduit shall be made tight. Where buried in

masonry or concrete, they shall be the concretetight type. Where

installed in wet locations, they shall comply with 314.15. Threadless

couplings and connectors shall not be used on threaded conduit ends

unless listed for the purpose.

314.15 Damp or Wet Locations. In Damp or Wet Locations boxes,

conduit bodies, and fittings shall be placed or equipped so as to

prevent moisture from entering or accumulating within the box, conduit

body, or fitting. Boxes, conduit bodies, and fittings installed in wet

locations shall be listed for use in wet locations.

330.40 Boxes and Fittings. Fittings used for connecting Type

MC cable to boxes, cabinets, or other equipment shall be listed

and identified for such use.

Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007,National Fire Protection Association, Quincy, MA 02169. This reprinted material is notthe complete and official position of the NFPA on the referenced subject, which isrepresented only by the standard in its entirety.

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 1

Page 4: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Zinc Die Cast250-RT2 18250 1/2” 50 500251-RT2 18251 3/4” 25 250252-RT2 18252 1” 15 150253-RT2 18253 1 1/4” 10 100254-RT2 18254 1 1/2” 10 40255-RT2 18255 2” --- 10256-RT2 18256 2 1/2” --- 12257-RT2 18257 3” --- 12258-RT2 18258 3 1/2” --- 6259-RT2 18259 4” --- 6Zinc Die Cast / Insulated Throat - 90°C250-RTI2 19250 1/2” 50 500251-RTI2 19251 3/4” 25 250252-RTI2 19252 1” 15 150253-RTI2 19253 1 1/4” 10 100254-RTI2 19254 1 1/2” 10 40255-RTI2 19255 2” --- 10256-RTI2 19256 2 1/2” --- 12257-RTI2 19257 3” --- 12258-RTI2 19258 3 1/2” --- 6259-RTI2 19259 4” --- 6Zinc Die Cast260-RT 14260 1/2” 50 500261-RT 14261 3/4” 25 250262-RT 14262 1” 15 150263-RT 14263 1 1/4” 10 100264-RT 14264 1 1/2” 10 40265-RT 14265 2” --- 10266-RT 14266 2 1/2” --- 12267-RT 14267 3” --- 12268-RT 14268 3 1/2” --- 6269-RT 14269 4” --- 6Steel250-SRT 20250 1/2” 25 250251-SRT 20251 3/4” 25 250252-SRT 20252 1” 10 100253-SRT 20253 1 1/4” --- 25254-SRT 20254 1 1/2” --- 25255-SRT 20255 2” --- 10256-SRT 20256 2 1/2” 2 10257-SRT 20257 3” 2 10258-SRT 20258 3 1/2” --- 6259-SRT 20259 4” --- 6Steel / Insulated Throat - 105°C250-SRTI 12250 1/2” 25 250251-SRTI 12251 3/4” 25 250252-SRTI 12252 1” 10 100253-SRTI 12253 1 1/4” --- 25254-SRTI 12254 1 1/2” --- 25255-SRTI 12255 2” --- 10256-SRTI 12256 2 1/2” 2 10257-SRTI 12257 3” 2 10258-SRTI 12258 3 1/2” --- 6259-SRTI 12259 4” --- 6Steel MADE IN THE USA!250-USRT 30250 1/2” 25 250251-USRT 30251 3/4” 25 250252-USRT 30252 1” 10 100253-USRT 30253 1 1/4” --- 25254-USRT 30254 1 1/2” --- 25255-USRT 30255 2” --- 10Steel / Insulated Throat - 105°C MADE IN THE USA!250-USRTI 13250 1/2” 25 250251-USRTI 13251 3/4” 25 250252-USRTI 13252 1” 10 100253-USRTI 13253 1 1/4” --- 25254-USRTI 13254 1 1/2” --- 25255-USRTI 13255 2” --- 10Steel260-SRT 20260 1/2” 25 250261-SRT 20261 3/4” 20 200262-SRT 20262 1” 10 100263-SRT 20263 1 1/4” --- 25264-SRT 20264 1 1/2” --- 25265-SRT 20265 2” --- 10266-SRT 20266 2 1/2” 2 10267-SRT 20267 3” 2 10268-SRT 20268 3 1/2” --- 6269-SRT 20269 4” --- 6Steel MADE IN THE USA!260-USRT 30260 1/2” 25 250261-USRT 30261 3/4” 20 200262-USRT 30262 1” 10 100263-USRT 30263 1 1/4” --- 25264-USRT 30264 1 1/2” --- 25265-USRT 30265 2” --- 10

ZINC RAINTIGHT COMPRESSION CONNECTORS

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Zinc Die Cast429-LT2 15429 3/8” 25 100430-LT2 15430 1/2” 25 100431-LT2 15431 3/4” 10 50432-LT2 15432 1” 5 25433-LT2 15433 1 1/4” 5 20434-LT2 15434 1 1/2” 2 10435-LT2 15435 2” 2 20436-LT2 15436 2 1/2” 1 5437-LT2 15437 3” 1 5438-LT2 15438 3 1/2” 1 5439-LT2 15439 4” 1 5

Zinc Die Cast / Insulated Throat - 105°C429-LTI2 16429 3/8” 25 100430-LTI2 16430 1/2” 25 100431-LTI2 16431 3/4” 10 50432-LTI2 16432 1” 5 25433-LTI2 16433 1 1/4” 5 20434-LTI2 16434 1 1/2” 2 10435-LTI2 16435 2” 2 20436-LTI2 16436 2 1/2” 1 5437-LTI2 16437 3” 1 5438-LTI2 16438 3 1/2” 1 5439-LTI2 16439 4” 1 5

Steel429-SLT 02429 3/8” 25 100430-SLT 02430 1/2” 25 100431-SLT 02431 3/4” 10 50432-SLT 02432 1” 5 25433-SLT 02433 1 1/4” 5 20434-SLT 02434 1 1/2” 2 10435-SLT 02435 2” 2 20

Steel / Insulated Throat - 105°C429-SLTI 04429 3/8” 25 100430-SLTI 04430 1/2” 25 100431-SLTI 04431 3/4” 10 50432-SLTI 04432 1” 5 25433-SLTI 04433 1 1/4” 5 20434-SLTI 04434 1 1/2” 2 10435-SLTI 04435 2” 2 20

Malleable Iron436-SLT 02436 2 1/2” 1 5437-SLT 02437 3” 1 5438-SLT 02438 3 1/2” 1 5439-SLT 02439 4” 1 5

Malleable Iron / Insulated Throat - 105°C436-SLTI 04436 2 1/2” 1 5437-SLTI 04437 3” 1 5438-SLTI 04438 3 1/2” 1 5439-SLTI 04439 4” 1 5

Steel with Aluminum Lug429-SLTG 20429 3/8” 25 125430-SLTG 20430 1/2” 25 125431-SLTG 20431 3/4” 25 125432-SLTG 20432 1” 10 50433-SLTG 20433 1 1/4” 5 25434-SLTG 20434 1 1/2” 5 25435-SLTG 20435 2” 2 10

Steel with Aluminum Lug / Insulated Throat - 105°C429-SLTIG 24429 3/8” 25 125430-SLTIG 24430 1/2” 25 125431-SLTIG 24431 3/4” 25 125432-SLTIG 24432 1” 10 50433-SLTIG 24433 1 1/4” 5 25434-SLTIG 24434 1 1/2” 5 25435-SLTIG 24435 2” 2 10

Malleable Iron449-SLT 02449 3/8” 25 100450-SLT 02450 1/2” 25 100451-SLT 02451 3/4” 10 50452-SLT 02452 1” 5 25453-SLT 02453 1 1/4” 5 25454-SLT 02454 1 1/2” 2 10455-SLT 02455 2” 1 5456-SLT 02456 2 1/2” --- 1457-SLT 02457 3” --- 1458-SLT 02458 3 1/2” --- 1459-SLT 02459 4” --- 1

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Malleable Iron / Insulated Throat - 105°C449-SLTI 04449 3/8” 25 100450-SLTI 04450 1/2” 25 100451-SLTI 04451 3/4” 10 50452-SLTI 04452 1” 5 25453-SLTI 04453 1 1/4” 5 25454-SLTI 04454 1 1/2” 2 10455-SLTI 04455 2” 1 5456-SLTI 04456 2 1/2” --- 1457-SLTI 04457 3” --- 1458-SLTI 04458 3 1/2” --- 1459-SLTI 04459 4” --- 1

Die Cast Zinc469-LT2 15469 3/8” 25 100470-LT2 15470 1/2” 25 100471-LT2 15471 3/4” 10 50472-LT2 15472 1” 5 25473-LT2 15473 1 1/4” 5 25

Die Cast Zinc / Insulated Throat - 105°C469-LTI2 16469 3/8” 25 100470-LTI2 16470 1/2” 25 100471-LTI2 16471 3/4” 10 50472-LTI2 16472 1” 5 25473-LTI2 16473 1 1/4” 5 25

Cast Zinc474-LT2 15474 1 1/2” 2 10475-LT2 15475 2” --- 5476-LT2 15476 2 1/2” --- 1477-LT2 15477 3” --- 1478-LT2 15478 3 1/2” --- 1479-LT2 15479 4” --- 1

Cast Zinc / Insulated Throat - 105°C474-LTI2 16474 1 1/2” 2 10475-LTI2 16475 2” --- 5476-LTI2 16476 2 1/2” --- 1477-LTI2 16477 3” --- 1478-LTI2 16478 3 1/2” --- 1479-LTI2 16479 4” --- 1

Steel469-SLT 02469 3/8” 25 100470-SLT 02470 1/2” 25 100471-SLT 02471 3/4” 10 50472-SLT 02472 1” 5 25473-SLT 02473 1 1/4” 5 25474-SLT 02474 1 1/2” 2 10475-SLT 02475 2” --- 5Steel / Insulated Throat - 105°C469-SLTI 04469 3/8” 25 100470-SLTI 04470 1/2” 25 100471-SLTI 04471 3/4” 10 50472-SLTI 04472 1” 5 25473-SLTI 04473 1 1/4” 5 25474-SLTI 04474 1 1/2” 2 10475-SLTI 04475 2” --- 5Malleable Iron476-SLT 02476 2 1/2” --- 1477-SLT 02477 3” --- 1478-SLT 02478 3 1/2” --- 1479-SLT 02479 4” --- 1Malleable Iron / Insulated Throat - 105°C476-SLTI 04476 2 1/2” --- 1477-SLTI 04477 3” --- 1478-SLTI 04478 3 1/2” --- 1479-SLTI 04479 4” --- 1

Steel with Aluminum Lug469-SLTG 20469 3/8” 20 100470-SLTG 20470 1/2” 20 100471-SLTG 20471 3/4” 10 50472-SLTG 20472 1” 5 25473-SLTG 20473 1 1/4” 4 20474-SLTG 20474 1 1/2” 3 15475-SLTG 20475 2” 2 10Steel with Aluminum / Insulated Throat - 105°C469-SLTIG 24469 3/8” 20 100470-SLTIG 24470 1/2” 20 100471-SLTIG 24471 3/4” 10 50472-SLTIG 24472 1” 5 25473-SLTIG 24473 1 1/4” 4 20474-SLTIG 24474 1 1/2” 3 15475-SLTIG 24475 2” 2 10

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Straight Non-Metallic429-NMLT 40429 3/8” 25 100430-NMLT 40430 1/2” 25 100431-NMLT 40431 3/4” 10 50432-NMLT 40432 1” 5 25433-NMLT 40433 1 1/4” 5 25434-NMLT 40434 1 1/2” 2 10435-NMLT 40435 2” 2 1090° Non-Metallic469-NMLT 40469 3/8” 25 100470-NMLT 40470 1/2” 25 100471-NMLT 40471 3/4” 10 50472-NMLT 40472 1” 5 25473-NMLT 40473 1 1/4” 2 10474-NMLT 40474 1 1/2” 2 10475-NMLT 40475 2” 2 10

Straight Non-Metallic430-NMLTS 44430 1/2” 25 100431-NMLTS 44431 3/4” 25 100

90° Non-Metallic470-NMLTS 44470 1/2” 10 100471-NMLTS 44471 3/4” 10 100

Zinc Die Cast4360-DC 94360 1/2” 25 1004361-DC 94361 3/4” 10 50To join metallic or non-metallic "Type "B" liquid tight to EMT.

Zinc Die Cast151-DC 09151 1/2” 25 100152-DC 09152 3/4” 25 100153-DC 09153 1” 10 50154-DC 09154 1 1/4” 5 25155-DC 09155 1 1/2” 2 20156-DC 09156 2” 2 20157-DC 09157 2 1/2” --- 10158-DC 09158 3” --- 5159-DC 09159 3 1/2” 1 5160-DC 09160 4” 1 5

Malleable Iron1121-RT 21121 1/2” 25 1001122-RT 21122 3/4” 10 1001123-RT 21123 1” 5 501124-RT 21124 1 1/4” --- 251125-RT 21125 1 1/2” --- 201126-RT 21126 2” --- 101127-RT 21127 2 1/2” --- 51128-RT 21128 3” --- 51129-RT 21129 3 1/2” --- 41130-RT 21130 4” --- 5

Steel / PVC Seal141 00141 1/2” 50 200142 00142 3/4” 25 100143 00143 1” 25 100144 00144 1 1/4” 25 100145 00145 1 1/2” 25 100146 00146 2” 25 100147 00147 2 1/2” 5 25148 00148 3” 5 25149 00149 3 1/2” 5 25150 00150 4” 5 25

Polyethylene With Steel RetainerSR-050 40490 1/2” 100 400SR-075 40491 3/4” 100 400SR-100 40492 1” 100 400SR-125 40493 1 1/4” 50 200SR-150 40494 1 1/2” 50 200SR-200 40495 2” 50 200SR-250 40496 2 1/2” --- 5SR-300 40497 3” --- 5SR-350 40498 3 1/2” --- 5SR-400 40499 4” --- 5

Zinc Die Cast595-DC2 15595 3/8” 15 60596-DC2 15596 3/8” 15 60

Zinc Die Cast / Insulated Throat - 90°C595-DCI2 16595 3/8” 15 60596-DCI2 16596 3/8” 15 60

Zinc Die Cast895-DC2 15895 3/8” 10 40

Zinc Die Cast / Insulated Throat – 90° C895-DCI2 16895 3/8” 10 40

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

STEEL RAINTIGHT COMPRESSION CONNECTORS

STEEL RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, STRAIGHT

LIQUID TIGHT CONNECTORS, STRAIGHT

Steel

Malleable

LIQUID TIGHT CONNECTORSWITH GROUNDING LUG, STRAIGHT

ZINC RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, 45° (CON’T)

LIQUID TIGHT CONNECTORS, 90°

LIQUID TIGHT CONNECTORS, 90°

Steel

Malleable Iron

LIQUID TIGHT CONNECTORS WITHGROUNDING LUG, 90°

Steel withAluminum Lug

LIQUID TIGHT CONNECTORS, STRAIGHT & 90°

SCREW-ONLIQUID TIGHTCONNECTORS,STRAIGHT & 90°

429-NMLT

TYPE 4 Watertight

470-NMLT

SELF-ALIGNING, RAINTIGHTTHREE-PIECE CONDUIT COUPLINGS

LIQUID TIGHT SEALING RINGS

JACKETED MCAND TECK CABLECONNECTOR

90° JACKETED MCAND TECK CABLECONNECTOR

CONCRETETIGHT

RAINTIGHT

CONCRETETIGHT

RAINTIGHT

THREADED HUBS

SEALING LOCKNUTS

www.bptfittings.com

LIQUID TIGHT CONNECTORS, 45°

430-NMLTS

470-NMLTS

RAINTIGHT COMBINATION/TRANSITION COUPLINGS

260-SRT

260-USRT

250-SRT

250-USRT

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 2

Page 5: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Zinc Die Cast250-RT2 18250 1/2” 50 500251-RT2 18251 3/4” 25 250252-RT2 18252 1” 15 150253-RT2 18253 1 1/4” 10 100254-RT2 18254 1 1/2” 10 40255-RT2 18255 2” --- 10256-RT2 18256 2 1/2” --- 12257-RT2 18257 3” --- 12258-RT2 18258 3 1/2” --- 6259-RT2 18259 4” --- 6Zinc Die Cast / Insulated Throat - 90°C250-RTI2 19250 1/2” 50 500251-RTI2 19251 3/4” 25 250252-RTI2 19252 1” 15 150253-RTI2 19253 1 1/4” 10 100254-RTI2 19254 1 1/2” 10 40255-RTI2 19255 2” --- 10256-RTI2 19256 2 1/2” --- 12257-RTI2 19257 3” --- 12258-RTI2 19258 3 1/2” --- 6259-RTI2 19259 4” --- 6Zinc Die Cast260-RT 14260 1/2” 50 500261-RT 14261 3/4” 25 250262-RT 14262 1” 15 150263-RT 14263 1 1/4” 10 100264-RT 14264 1 1/2” 10 40265-RT 14265 2” --- 10266-RT 14266 2 1/2” --- 12267-RT 14267 3” --- 12268-RT 14268 3 1/2” --- 6269-RT 14269 4” --- 6Steel250-SRT 20250 1/2” 25 250251-SRT 20251 3/4” 25 250252-SRT 20252 1” 10 100253-SRT 20253 1 1/4” --- 25254-SRT 20254 1 1/2” --- 25255-SRT 20255 2” --- 10256-SRT 20256 2 1/2” 2 10257-SRT 20257 3” 2 10258-SRT 20258 3 1/2” --- 6259-SRT 20259 4” --- 6Steel / Insulated Throat - 105°C250-SRTI 12250 1/2” 25 250251-SRTI 12251 3/4” 25 250252-SRTI 12252 1” 10 100253-SRTI 12253 1 1/4” --- 25254-SRTI 12254 1 1/2” --- 25255-SRTI 12255 2” --- 10256-SRTI 12256 2 1/2” 2 10257-SRTI 12257 3” 2 10258-SRTI 12258 3 1/2” --- 6259-SRTI 12259 4” --- 6Steel MADE IN THE USA!250-USRT 30250 1/2” 25 250251-USRT 30251 3/4” 25 250252-USRT 30252 1” 10 100253-USRT 30253 1 1/4” --- 25254-USRT 30254 1 1/2” --- 25255-USRT 30255 2” --- 10Steel / Insulated Throat - 105°C MADE IN THE USA!250-USRTI 13250 1/2” 25 250251-USRTI 13251 3/4” 25 250252-USRTI 13252 1” 10 100253-USRTI 13253 1 1/4” --- 25254-USRTI 13254 1 1/2” --- 25255-USRTI 13255 2” --- 10Steel260-SRT 20260 1/2” 25 250261-SRT 20261 3/4” 20 200262-SRT 20262 1” 10 100263-SRT 20263 1 1/4” --- 25264-SRT 20264 1 1/2” --- 25265-SRT 20265 2” --- 10266-SRT 20266 2 1/2” 2 10267-SRT 20267 3” 2 10268-SRT 20268 3 1/2” --- 6269-SRT 20269 4” --- 6Steel MADE IN THE USA!260-USRT 30260 1/2” 25 250261-USRT 30261 3/4” 20 200262-USRT 30262 1” 10 100263-USRT 30263 1 1/4” --- 25264-USRT 30264 1 1/2” --- 25265-USRT 30265 2” --- 10

ZINC RAINTIGHT COMPRESSION CONNECTORS

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Zinc Die Cast429-LT2 15429 3/8” 25 100430-LT2 15430 1/2” 25 100431-LT2 15431 3/4” 10 50432-LT2 15432 1” 5 25433-LT2 15433 1 1/4” 5 20434-LT2 15434 1 1/2” 2 10435-LT2 15435 2” 2 20436-LT2 15436 2 1/2” 1 5437-LT2 15437 3” 1 5438-LT2 15438 3 1/2” 1 5439-LT2 15439 4” 1 5

Zinc Die Cast / Insulated Throat - 105°C429-LTI2 16429 3/8” 25 100430-LTI2 16430 1/2” 25 100431-LTI2 16431 3/4” 10 50432-LTI2 16432 1” 5 25433-LTI2 16433 1 1/4” 5 20434-LTI2 16434 1 1/2” 2 10435-LTI2 16435 2” 2 20436-LTI2 16436 2 1/2” 1 5437-LTI2 16437 3” 1 5438-LTI2 16438 3 1/2” 1 5439-LTI2 16439 4” 1 5

Steel429-SLT 02429 3/8” 25 100430-SLT 02430 1/2” 25 100431-SLT 02431 3/4” 10 50432-SLT 02432 1” 5 25433-SLT 02433 1 1/4” 5 20434-SLT 02434 1 1/2” 2 10435-SLT 02435 2” 2 20

Steel / Insulated Throat - 105°C429-SLTI 04429 3/8” 25 100430-SLTI 04430 1/2” 25 100431-SLTI 04431 3/4” 10 50432-SLTI 04432 1” 5 25433-SLTI 04433 1 1/4” 5 20434-SLTI 04434 1 1/2” 2 10435-SLTI 04435 2” 2 20

Malleable Iron436-SLT 02436 2 1/2” 1 5437-SLT 02437 3” 1 5438-SLT 02438 3 1/2” 1 5439-SLT 02439 4” 1 5

Malleable Iron / Insulated Throat - 105°C436-SLTI 04436 2 1/2” 1 5437-SLTI 04437 3” 1 5438-SLTI 04438 3 1/2” 1 5439-SLTI 04439 4” 1 5

Steel with Aluminum Lug429-SLTG 20429 3/8” 25 125430-SLTG 20430 1/2” 25 125431-SLTG 20431 3/4” 25 125432-SLTG 20432 1” 10 50433-SLTG 20433 1 1/4” 5 25434-SLTG 20434 1 1/2” 5 25435-SLTG 20435 2” 2 10

Steel with Aluminum Lug / Insulated Throat - 105°C429-SLTIG 24429 3/8” 25 125430-SLTIG 24430 1/2” 25 125431-SLTIG 24431 3/4” 25 125432-SLTIG 24432 1” 10 50433-SLTIG 24433 1 1/4” 5 25434-SLTIG 24434 1 1/2” 5 25435-SLTIG 24435 2” 2 10

Malleable Iron449-SLT 02449 3/8” 25 100450-SLT 02450 1/2” 25 100451-SLT 02451 3/4” 10 50452-SLT 02452 1” 5 25453-SLT 02453 1 1/4” 5 25454-SLT 02454 1 1/2” 2 10455-SLT 02455 2” 1 5456-SLT 02456 2 1/2” --- 1457-SLT 02457 3” --- 1458-SLT 02458 3 1/2” --- 1459-SLT 02459 4” --- 1

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Malleable Iron / Insulated Throat - 105°C449-SLTI 04449 3/8” 25 100450-SLTI 04450 1/2” 25 100451-SLTI 04451 3/4” 10 50452-SLTI 04452 1” 5 25453-SLTI 04453 1 1/4” 5 25454-SLTI 04454 1 1/2” 2 10455-SLTI 04455 2” 1 5456-SLTI 04456 2 1/2” --- 1457-SLTI 04457 3” --- 1458-SLTI 04458 3 1/2” --- 1459-SLTI 04459 4” --- 1

Die Cast Zinc469-LT2 15469 3/8” 25 100470-LT2 15470 1/2” 25 100471-LT2 15471 3/4” 10 50472-LT2 15472 1” 5 25473-LT2 15473 1 1/4” 5 25

Die Cast Zinc / Insulated Throat - 105°C469-LTI2 16469 3/8” 25 100470-LTI2 16470 1/2” 25 100471-LTI2 16471 3/4” 10 50472-LTI2 16472 1” 5 25473-LTI2 16473 1 1/4” 5 25

Cast Zinc474-LT2 15474 1 1/2” 2 10475-LT2 15475 2” --- 5476-LT2 15476 2 1/2” --- 1477-LT2 15477 3” --- 1478-LT2 15478 3 1/2” --- 1479-LT2 15479 4” --- 1

Cast Zinc / Insulated Throat - 105°C474-LTI2 16474 1 1/2” 2 10475-LTI2 16475 2” --- 5476-LTI2 16476 2 1/2” --- 1477-LTI2 16477 3” --- 1478-LTI2 16478 3 1/2” --- 1479-LTI2 16479 4” --- 1

Steel469-SLT 02469 3/8” 25 100470-SLT 02470 1/2” 25 100471-SLT 02471 3/4” 10 50472-SLT 02472 1” 5 25473-SLT 02473 1 1/4” 5 25474-SLT 02474 1 1/2” 2 10475-SLT 02475 2” --- 5Steel / Insulated Throat - 105°C469-SLTI 04469 3/8” 25 100470-SLTI 04470 1/2” 25 100471-SLTI 04471 3/4” 10 50472-SLTI 04472 1” 5 25473-SLTI 04473 1 1/4” 5 25474-SLTI 04474 1 1/2” 2 10475-SLTI 04475 2” --- 5Malleable Iron476-SLT 02476 2 1/2” --- 1477-SLT 02477 3” --- 1478-SLT 02478 3 1/2” --- 1479-SLT 02479 4” --- 1Malleable Iron / Insulated Throat - 105°C476-SLTI 04476 2 1/2” --- 1477-SLTI 04477 3” --- 1478-SLTI 04478 3 1/2” --- 1479-SLTI 04479 4” --- 1

Steel with Aluminum Lug469-SLTG 20469 3/8” 20 100470-SLTG 20470 1/2” 20 100471-SLTG 20471 3/4” 10 50472-SLTG 20472 1” 5 25473-SLTG 20473 1 1/4” 4 20474-SLTG 20474 1 1/2” 3 15475-SLTG 20475 2” 2 10Steel with Aluminum / Insulated Throat - 105°C469-SLTIG 24469 3/8” 20 100470-SLTIG 24470 1/2” 20 100471-SLTIG 24471 3/4” 10 50472-SLTIG 24472 1” 5 25473-SLTIG 24473 1 1/4” 4 20474-SLTIG 24474 1 1/2” 3 15475-SLTIG 24475 2” 2 10

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Straight Non-Metallic429-NMLT 40429 3/8” 25 100430-NMLT 40430 1/2” 25 100431-NMLT 40431 3/4” 10 50432-NMLT 40432 1” 5 25433-NMLT 40433 1 1/4” 5 25434-NMLT 40434 1 1/2” 2 10435-NMLT 40435 2” 2 1090° Non-Metallic469-NMLT 40469 3/8” 25 100470-NMLT 40470 1/2” 25 100471-NMLT 40471 3/4” 10 50472-NMLT 40472 1” 5 25473-NMLT 40473 1 1/4” 2 10474-NMLT 40474 1 1/2” 2 10475-NMLT 40475 2” 2 10

Straight Non-Metallic430-NMLTS 44430 1/2” 25 100431-NMLTS 44431 3/4” 25 100

90° Non-Metallic470-NMLTS 44470 1/2” 10 100471-NMLTS 44471 3/4” 10 100

Zinc Die Cast4360-DC 94360 1/2” 25 1004361-DC 94361 3/4” 10 50To join metallic or non-metallic "Type "B" liquid tight to EMT.

Zinc Die Cast151-DC 09151 1/2” 25 100152-DC 09152 3/4” 25 100153-DC 09153 1” 10 50154-DC 09154 1 1/4” 5 25155-DC 09155 1 1/2” 2 20156-DC 09156 2” 2 20157-DC 09157 2 1/2” --- 10158-DC 09158 3” --- 5159-DC 09159 3 1/2” 1 5160-DC 09160 4” 1 5

Malleable Iron1121-RT 21121 1/2” 25 1001122-RT 21122 3/4” 10 1001123-RT 21123 1” 5 501124-RT 21124 1 1/4” --- 251125-RT 21125 1 1/2” --- 201126-RT 21126 2” --- 101127-RT 21127 2 1/2” --- 51128-RT 21128 3” --- 51129-RT 21129 3 1/2” --- 41130-RT 21130 4” --- 5

Steel / PVC Seal141 00141 1/2” 50 200142 00142 3/4” 25 100143 00143 1” 25 100144 00144 1 1/4” 25 100145 00145 1 1/2” 25 100146 00146 2” 25 100147 00147 2 1/2” 5 25148 00148 3” 5 25149 00149 3 1/2” 5 25150 00150 4” 5 25

Polyethylene With Steel RetainerSR-050 40490 1/2” 100 400SR-075 40491 3/4” 100 400SR-100 40492 1” 100 400SR-125 40493 1 1/4” 50 200SR-150 40494 1 1/2” 50 200SR-200 40495 2” 50 200SR-250 40496 2 1/2” --- 5SR-300 40497 3” --- 5SR-350 40498 3 1/2” --- 5SR-400 40499 4” --- 5

Zinc Die Cast595-DC2 15595 3/8” 15 60596-DC2 15596 3/8” 15 60

Zinc Die Cast / Insulated Throat - 90°C595-DCI2 16595 3/8” 15 60596-DCI2 16596 3/8” 15 60

Zinc Die Cast895-DC2 15895 3/8” 10 40

Zinc Die Cast / Insulated Throat – 90° C895-DCI2 16895 3/8” 10 40

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

STEEL RAINTIGHT COMPRESSION CONNECTORS

STEEL RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, STRAIGHT

LIQUID TIGHT CONNECTORS, STRAIGHT

Steel

Malleable

LIQUID TIGHT CONNECTORSWITH GROUNDING LUG, STRAIGHT

ZINC RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, 45° (CON’T)

LIQUID TIGHT CONNECTORS, 90°

LIQUID TIGHT CONNECTORS, 90°

Steel

Malleable Iron

LIQUID TIGHT CONNECTORS WITHGROUNDING LUG, 90°

Steel withAluminum Lug

LIQUID TIGHT CONNECTORS, STRAIGHT & 90°

SCREW-ONLIQUID TIGHTCONNECTORS,STRAIGHT & 90°

429-NMLT

TYPE 4 Watertight

470-NMLT

SELF-ALIGNING, RAINTIGHTTHREE-PIECE CONDUIT COUPLINGS

LIQUID TIGHT SEALING RINGS

JACKETED MCAND TECK CABLECONNECTOR

90° JACKETED MCAND TECK CABLECONNECTOR

CONCRETETIGHT

RAINTIGHT

CONCRETETIGHT

RAINTIGHT

THREADED HUBS

SEALING LOCKNUTS

www.bptfittings.com

LIQUID TIGHT CONNECTORS, 45°

430-NMLTS

470-NMLTS

RAINTIGHT COMBINATION/TRANSITION COUPLINGS

260-SRT

260-USRT

250-SRT

250-USRT

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 2

Page 6: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Zinc Die Cast250-RT2 18250 1/2” 50 500251-RT2 18251 3/4” 25 250252-RT2 18252 1” 15 150253-RT2 18253 1 1/4” 10 100254-RT2 18254 1 1/2” 10 40255-RT2 18255 2” --- 10256-RT2 18256 2 1/2” --- 12257-RT2 18257 3” --- 12258-RT2 18258 3 1/2” --- 6259-RT2 18259 4” --- 6Zinc Die Cast / Insulated Throat - 90°C250-RTI2 19250 1/2” 50 500251-RTI2 19251 3/4” 25 250252-RTI2 19252 1” 15 150253-RTI2 19253 1 1/4” 10 100254-RTI2 19254 1 1/2” 10 40255-RTI2 19255 2” --- 10256-RTI2 19256 2 1/2” --- 12257-RTI2 19257 3” --- 12258-RTI2 19258 3 1/2” --- 6259-RTI2 19259 4” --- 6Zinc Die Cast260-RT 14260 1/2” 50 500261-RT 14261 3/4” 25 250262-RT 14262 1” 15 150263-RT 14263 1 1/4” 10 100264-RT 14264 1 1/2” 10 40265-RT 14265 2” --- 10266-RT 14266 2 1/2” --- 12267-RT 14267 3” --- 12268-RT 14268 3 1/2” --- 6269-RT 14269 4” --- 6Steel250-SRT 20250 1/2” 25 250251-SRT 20251 3/4” 25 250252-SRT 20252 1” 10 100253-SRT 20253 1 1/4” --- 25254-SRT 20254 1 1/2” --- 25255-SRT 20255 2” --- 10256-SRT 20256 2 1/2” 2 10257-SRT 20257 3” 2 10258-SRT 20258 3 1/2” --- 6259-SRT 20259 4” --- 6Steel / Insulated Throat - 105°C250-SRTI 12250 1/2” 25 250251-SRTI 12251 3/4” 25 250252-SRTI 12252 1” 10 100253-SRTI 12253 1 1/4” --- 25254-SRTI 12254 1 1/2” --- 25255-SRTI 12255 2” --- 10256-SRTI 12256 2 1/2” 2 10257-SRTI 12257 3” 2 10258-SRTI 12258 3 1/2” --- 6259-SRTI 12259 4” --- 6Steel MADE IN THE USA!250-USRT 30250 1/2” 25 250251-USRT 30251 3/4” 25 250252-USRT 30252 1” 10 100253-USRT 30253 1 1/4” --- 25254-USRT 30254 1 1/2” --- 25255-USRT 30255 2” --- 10Steel / Insulated Throat - 105°C MADE IN THE USA!250-USRTI 13250 1/2” 25 250251-USRTI 13251 3/4” 25 250252-USRTI 13252 1” 10 100253-USRTI 13253 1 1/4” --- 25254-USRTI 13254 1 1/2” --- 25255-USRTI 13255 2” --- 10Steel260-SRT 20260 1/2” 25 250261-SRT 20261 3/4” 20 200262-SRT 20262 1” 10 100263-SRT 20263 1 1/4” --- 25264-SRT 20264 1 1/2” --- 25265-SRT 20265 2” --- 10266-SRT 20266 2 1/2” 2 10267-SRT 20267 3” 2 10268-SRT 20268 3 1/2” --- 6269-SRT 20269 4” --- 6Steel MADE IN THE USA!260-USRT 30260 1/2” 25 250261-USRT 30261 3/4” 20 200262-USRT 30262 1” 10 100263-USRT 30263 1 1/4” --- 25264-USRT 30264 1 1/2” --- 25265-USRT 30265 2” --- 10

ZINC RAINTIGHT COMPRESSION CONNECTORS

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Zinc Die Cast429-LT2 15429 3/8” 25 100430-LT2 15430 1/2” 25 100431-LT2 15431 3/4” 10 50432-LT2 15432 1” 5 25433-LT2 15433 1 1/4” 5 20434-LT2 15434 1 1/2” 2 10435-LT2 15435 2” 2 20436-LT2 15436 2 1/2” 1 5437-LT2 15437 3” 1 5438-LT2 15438 3 1/2” 1 5439-LT2 15439 4” 1 5

Zinc Die Cast / Insulated Throat - 105°C429-LTI2 16429 3/8” 25 100430-LTI2 16430 1/2” 25 100431-LTI2 16431 3/4” 10 50432-LTI2 16432 1” 5 25433-LTI2 16433 1 1/4” 5 20434-LTI2 16434 1 1/2” 2 10435-LTI2 16435 2” 2 20436-LTI2 16436 2 1/2” 1 5437-LTI2 16437 3” 1 5438-LTI2 16438 3 1/2” 1 5439-LTI2 16439 4” 1 5

Steel429-SLT 02429 3/8” 25 100430-SLT 02430 1/2” 25 100431-SLT 02431 3/4” 10 50432-SLT 02432 1” 5 25433-SLT 02433 1 1/4” 5 20434-SLT 02434 1 1/2” 2 10435-SLT 02435 2” 2 20

Steel / Insulated Throat - 105°C429-SLTI 04429 3/8” 25 100430-SLTI 04430 1/2” 25 100431-SLTI 04431 3/4” 10 50432-SLTI 04432 1” 5 25433-SLTI 04433 1 1/4” 5 20434-SLTI 04434 1 1/2” 2 10435-SLTI 04435 2” 2 20

Malleable Iron436-SLT 02436 2 1/2” 1 5437-SLT 02437 3” 1 5438-SLT 02438 3 1/2” 1 5439-SLT 02439 4” 1 5

Malleable Iron / Insulated Throat - 105°C436-SLTI 04436 2 1/2” 1 5437-SLTI 04437 3” 1 5438-SLTI 04438 3 1/2” 1 5439-SLTI 04439 4” 1 5

Steel with Aluminum Lug429-SLTG 20429 3/8” 25 125430-SLTG 20430 1/2” 25 125431-SLTG 20431 3/4” 25 125432-SLTG 20432 1” 10 50433-SLTG 20433 1 1/4” 5 25434-SLTG 20434 1 1/2” 5 25435-SLTG 20435 2” 2 10

Steel with Aluminum Lug / Insulated Throat - 105°C429-SLTIG 24429 3/8” 25 125430-SLTIG 24430 1/2” 25 125431-SLTIG 24431 3/4” 25 125432-SLTIG 24432 1” 10 50433-SLTIG 24433 1 1/4” 5 25434-SLTIG 24434 1 1/2” 5 25435-SLTIG 24435 2” 2 10

Malleable Iron449-SLT 02449 3/8” 25 100450-SLT 02450 1/2” 25 100451-SLT 02451 3/4” 10 50452-SLT 02452 1” 5 25453-SLT 02453 1 1/4” 5 25454-SLT 02454 1 1/2” 2 10455-SLT 02455 2” 1 5456-SLT 02456 2 1/2” --- 1457-SLT 02457 3” --- 1458-SLT 02458 3 1/2” --- 1459-SLT 02459 4” --- 1

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Malleable Iron / Insulated Throat - 105°C449-SLTI 04449 3/8” 25 100450-SLTI 04450 1/2” 25 100451-SLTI 04451 3/4” 10 50452-SLTI 04452 1” 5 25453-SLTI 04453 1 1/4” 5 25454-SLTI 04454 1 1/2” 2 10455-SLTI 04455 2” 1 5456-SLTI 04456 2 1/2” --- 1457-SLTI 04457 3” --- 1458-SLTI 04458 3 1/2” --- 1459-SLTI 04459 4” --- 1

Die Cast Zinc469-LT2 15469 3/8” 25 100470-LT2 15470 1/2” 25 100471-LT2 15471 3/4” 10 50472-LT2 15472 1” 5 25473-LT2 15473 1 1/4” 5 25

Die Cast Zinc / Insulated Throat - 105°C469-LTI2 16469 3/8” 25 100470-LTI2 16470 1/2” 25 100471-LTI2 16471 3/4” 10 50472-LTI2 16472 1” 5 25473-LTI2 16473 1 1/4” 5 25

Cast Zinc474-LT2 15474 1 1/2” 2 10475-LT2 15475 2” --- 5476-LT2 15476 2 1/2” --- 1477-LT2 15477 3” --- 1478-LT2 15478 3 1/2” --- 1479-LT2 15479 4” --- 1

Cast Zinc / Insulated Throat - 105°C474-LTI2 16474 1 1/2” 2 10475-LTI2 16475 2” --- 5476-LTI2 16476 2 1/2” --- 1477-LTI2 16477 3” --- 1478-LTI2 16478 3 1/2” --- 1479-LTI2 16479 4” --- 1

Steel469-SLT 02469 3/8” 25 100470-SLT 02470 1/2” 25 100471-SLT 02471 3/4” 10 50472-SLT 02472 1” 5 25473-SLT 02473 1 1/4” 5 25474-SLT 02474 1 1/2” 2 10475-SLT 02475 2” --- 5Steel / Insulated Throat - 105°C469-SLTI 04469 3/8” 25 100470-SLTI 04470 1/2” 25 100471-SLTI 04471 3/4” 10 50472-SLTI 04472 1” 5 25473-SLTI 04473 1 1/4” 5 25474-SLTI 04474 1 1/2” 2 10475-SLTI 04475 2” --- 5Malleable Iron476-SLT 02476 2 1/2” --- 1477-SLT 02477 3” --- 1478-SLT 02478 3 1/2” --- 1479-SLT 02479 4” --- 1Malleable Iron / Insulated Throat - 105°C476-SLTI 04476 2 1/2” --- 1477-SLTI 04477 3” --- 1478-SLTI 04478 3 1/2” --- 1479-SLTI 04479 4” --- 1

Steel with Aluminum Lug469-SLTG 20469 3/8” 20 100470-SLTG 20470 1/2” 20 100471-SLTG 20471 3/4” 10 50472-SLTG 20472 1” 5 25473-SLTG 20473 1 1/4” 4 20474-SLTG 20474 1 1/2” 3 15475-SLTG 20475 2” 2 10Steel with Aluminum / Insulated Throat - 105°C469-SLTIG 24469 3/8” 20 100470-SLTIG 24470 1/2” 20 100471-SLTIG 24471 3/4” 10 50472-SLTIG 24472 1” 5 25473-SLTIG 24473 1 1/4” 4 20474-SLTIG 24474 1 1/2” 3 15475-SLTIG 24475 2” 2 10

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Straight Non-Metallic429-NMLT 40429 3/8” 25 100430-NMLT 40430 1/2” 25 100431-NMLT 40431 3/4” 10 50432-NMLT 40432 1” 5 25433-NMLT 40433 1 1/4” 5 25434-NMLT 40434 1 1/2” 2 10435-NMLT 40435 2” 2 1090° Non-Metallic469-NMLT 40469 3/8” 25 100470-NMLT 40470 1/2” 25 100471-NMLT 40471 3/4” 10 50472-NMLT 40472 1” 5 25473-NMLT 40473 1 1/4” 2 10474-NMLT 40474 1 1/2” 2 10475-NMLT 40475 2” 2 10

Straight Non-Metallic430-NMLTS 44430 1/2” 25 100431-NMLTS 44431 3/4” 25 100

90° Non-Metallic470-NMLTS 44470 1/2” 10 100471-NMLTS 44471 3/4” 10 100

Zinc Die Cast4360-DC 94360 1/2” 25 1004361-DC 94361 3/4” 10 50To join metallic or non-metallic "Type "B" liquid tight to EMT.

Zinc Die Cast151-DC 09151 1/2” 25 100152-DC 09152 3/4” 25 100153-DC 09153 1” 10 50154-DC 09154 1 1/4” 5 25155-DC 09155 1 1/2” 2 20156-DC 09156 2” 2 20157-DC 09157 2 1/2” --- 10158-DC 09158 3” --- 5159-DC 09159 3 1/2” 1 5160-DC 09160 4” 1 5

Malleable Iron1121-RT 21121 1/2” 25 1001122-RT 21122 3/4” 10 1001123-RT 21123 1” 5 501124-RT 21124 1 1/4” --- 251125-RT 21125 1 1/2” --- 201126-RT 21126 2” --- 101127-RT 21127 2 1/2” --- 51128-RT 21128 3” --- 51129-RT 21129 3 1/2” --- 41130-RT 21130 4” --- 5

Steel / PVC Seal141 00141 1/2” 50 200142 00142 3/4” 25 100143 00143 1” 25 100144 00144 1 1/4” 25 100145 00145 1 1/2” 25 100146 00146 2” 25 100147 00147 2 1/2” 5 25148 00148 3” 5 25149 00149 3 1/2” 5 25150 00150 4” 5 25

Polyethylene With Steel RetainerSR-050 40490 1/2” 100 400SR-075 40491 3/4” 100 400SR-100 40492 1” 100 400SR-125 40493 1 1/4” 50 200SR-150 40494 1 1/2” 50 200SR-200 40495 2” 50 200SR-250 40496 2 1/2” --- 5SR-300 40497 3” --- 5SR-350 40498 3 1/2” --- 5SR-400 40499 4” --- 5

Zinc Die Cast595-DC2 15595 3/8” 15 60596-DC2 15596 3/8” 15 60

Zinc Die Cast / Insulated Throat - 90°C595-DCI2 16595 3/8” 15 60596-DCI2 16596 3/8” 15 60

Zinc Die Cast895-DC2 15895 3/8” 10 40

Zinc Die Cast / Insulated Throat – 90° C895-DCI2 16895 3/8” 10 40

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

STEEL RAINTIGHT COMPRESSION CONNECTORS

STEEL RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, STRAIGHT

LIQUID TIGHT CONNECTORS, STRAIGHT

Steel

Malleable

LIQUID TIGHT CONNECTORSWITH GROUNDING LUG, STRAIGHT

ZINC RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, 45° (CON’T)

LIQUID TIGHT CONNECTORS, 90°

LIQUID TIGHT CONNECTORS, 90°

Steel

Malleable Iron

LIQUID TIGHT CONNECTORS WITHGROUNDING LUG, 90°

Steel withAluminum Lug

LIQUID TIGHT CONNECTORS, STRAIGHT & 90°

SCREW-ONLIQUID TIGHTCONNECTORS,STRAIGHT & 90°

429-NMLT

TYPE 4 Watertight

470-NMLT

SELF-ALIGNING, RAINTIGHTTHREE-PIECE CONDUIT COUPLINGS

LIQUID TIGHT SEALING RINGS

JACKETED MCAND TECK CABLECONNECTOR

90° JACKETED MCAND TECK CABLECONNECTOR

CONCRETETIGHT

RAINTIGHT

CONCRETETIGHT

RAINTIGHT

THREADED HUBS

SEALING LOCKNUTS

www.bptfittings.com

LIQUID TIGHT CONNECTORS, 45°

430-NMLTS

470-NMLTS

RAINTIGHT COMBINATION/TRANSITION COUPLINGS

260-SRT

260-USRT

250-SRT

250-USRT

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 2

Page 7: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Zinc Die Cast250-RT2 18250 1/2” 50 500251-RT2 18251 3/4” 25 250252-RT2 18252 1” 15 150253-RT2 18253 1 1/4” 10 100254-RT2 18254 1 1/2” 10 40255-RT2 18255 2” --- 10256-RT2 18256 2 1/2” --- 12257-RT2 18257 3” --- 12258-RT2 18258 3 1/2” --- 6259-RT2 18259 4” --- 6Zinc Die Cast / Insulated Throat - 90°C250-RTI2 19250 1/2” 50 500251-RTI2 19251 3/4” 25 250252-RTI2 19252 1” 15 150253-RTI2 19253 1 1/4” 10 100254-RTI2 19254 1 1/2” 10 40255-RTI2 19255 2” --- 10256-RTI2 19256 2 1/2” --- 12257-RTI2 19257 3” --- 12258-RTI2 19258 3 1/2” --- 6259-RTI2 19259 4” --- 6Zinc Die Cast260-RT 14260 1/2” 50 500261-RT 14261 3/4” 25 250262-RT 14262 1” 15 150263-RT 14263 1 1/4” 10 100264-RT 14264 1 1/2” 10 40265-RT 14265 2” --- 10266-RT 14266 2 1/2” --- 12267-RT 14267 3” --- 12268-RT 14268 3 1/2” --- 6269-RT 14269 4” --- 6Steel250-SRT 20250 1/2” 25 250251-SRT 20251 3/4” 25 250252-SRT 20252 1” 10 100253-SRT 20253 1 1/4” --- 25254-SRT 20254 1 1/2” --- 25255-SRT 20255 2” --- 10256-SRT 20256 2 1/2” 2 10257-SRT 20257 3” 2 10258-SRT 20258 3 1/2” --- 6259-SRT 20259 4” --- 6Steel / Insulated Throat - 105°C250-SRTI 12250 1/2” 25 250251-SRTI 12251 3/4” 25 250252-SRTI 12252 1” 10 100253-SRTI 12253 1 1/4” --- 25254-SRTI 12254 1 1/2” --- 25255-SRTI 12255 2” --- 10256-SRTI 12256 2 1/2” 2 10257-SRTI 12257 3” 2 10258-SRTI 12258 3 1/2” --- 6259-SRTI 12259 4” --- 6Steel MADE IN THE USA!250-USRT 30250 1/2” 25 250251-USRT 30251 3/4” 25 250252-USRT 30252 1” 10 100253-USRT 30253 1 1/4” --- 25254-USRT 30254 1 1/2” --- 25255-USRT 30255 2” --- 10Steel / Insulated Throat - 105°C MADE IN THE USA!250-USRTI 13250 1/2” 25 250251-USRTI 13251 3/4” 25 250252-USRTI 13252 1” 10 100253-USRTI 13253 1 1/4” --- 25254-USRTI 13254 1 1/2” --- 25255-USRTI 13255 2” --- 10Steel260-SRT 20260 1/2” 25 250261-SRT 20261 3/4” 20 200262-SRT 20262 1” 10 100263-SRT 20263 1 1/4” --- 25264-SRT 20264 1 1/2” --- 25265-SRT 20265 2” --- 10266-SRT 20266 2 1/2” 2 10267-SRT 20267 3” 2 10268-SRT 20268 3 1/2” --- 6269-SRT 20269 4” --- 6Steel MADE IN THE USA!260-USRT 30260 1/2” 25 250261-USRT 30261 3/4” 20 200262-USRT 30262 1” 10 100263-USRT 30263 1 1/4” --- 25264-USRT 30264 1 1/2” --- 25265-USRT 30265 2” --- 10

ZINC RAINTIGHT COMPRESSION CONNECTORS

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Zinc Die Cast429-LT2 15429 3/8” 25 100430-LT2 15430 1/2” 25 100431-LT2 15431 3/4” 10 50432-LT2 15432 1” 5 25433-LT2 15433 1 1/4” 5 20434-LT2 15434 1 1/2” 2 10435-LT2 15435 2” 2 20436-LT2 15436 2 1/2” 1 5437-LT2 15437 3” 1 5438-LT2 15438 3 1/2” 1 5439-LT2 15439 4” 1 5

Zinc Die Cast / Insulated Throat - 105°C429-LTI2 16429 3/8” 25 100430-LTI2 16430 1/2” 25 100431-LTI2 16431 3/4” 10 50432-LTI2 16432 1” 5 25433-LTI2 16433 1 1/4” 5 20434-LTI2 16434 1 1/2” 2 10435-LTI2 16435 2” 2 20436-LTI2 16436 2 1/2” 1 5437-LTI2 16437 3” 1 5438-LTI2 16438 3 1/2” 1 5439-LTI2 16439 4” 1 5

Steel429-SLT 02429 3/8” 25 100430-SLT 02430 1/2” 25 100431-SLT 02431 3/4” 10 50432-SLT 02432 1” 5 25433-SLT 02433 1 1/4” 5 20434-SLT 02434 1 1/2” 2 10435-SLT 02435 2” 2 20

Steel / Insulated Throat - 105°C429-SLTI 04429 3/8” 25 100430-SLTI 04430 1/2” 25 100431-SLTI 04431 3/4” 10 50432-SLTI 04432 1” 5 25433-SLTI 04433 1 1/4” 5 20434-SLTI 04434 1 1/2” 2 10435-SLTI 04435 2” 2 20

Malleable Iron436-SLT 02436 2 1/2” 1 5437-SLT 02437 3” 1 5438-SLT 02438 3 1/2” 1 5439-SLT 02439 4” 1 5

Malleable Iron / Insulated Throat - 105°C436-SLTI 04436 2 1/2” 1 5437-SLTI 04437 3” 1 5438-SLTI 04438 3 1/2” 1 5439-SLTI 04439 4” 1 5

Steel with Aluminum Lug429-SLTG 20429 3/8” 25 125430-SLTG 20430 1/2” 25 125431-SLTG 20431 3/4” 25 125432-SLTG 20432 1” 10 50433-SLTG 20433 1 1/4” 5 25434-SLTG 20434 1 1/2” 5 25435-SLTG 20435 2” 2 10

Steel with Aluminum Lug / Insulated Throat - 105°C429-SLTIG 24429 3/8” 25 125430-SLTIG 24430 1/2” 25 125431-SLTIG 24431 3/4” 25 125432-SLTIG 24432 1” 10 50433-SLTIG 24433 1 1/4” 5 25434-SLTIG 24434 1 1/2” 5 25435-SLTIG 24435 2” 2 10

Malleable Iron449-SLT 02449 3/8” 25 100450-SLT 02450 1/2” 25 100451-SLT 02451 3/4” 10 50452-SLT 02452 1” 5 25453-SLT 02453 1 1/4” 5 25454-SLT 02454 1 1/2” 2 10455-SLT 02455 2” 1 5456-SLT 02456 2 1/2” --- 1457-SLT 02457 3” --- 1458-SLT 02458 3 1/2” --- 1459-SLT 02459 4” --- 1

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Malleable Iron / Insulated Throat - 105°C449-SLTI 04449 3/8” 25 100450-SLTI 04450 1/2” 25 100451-SLTI 04451 3/4” 10 50452-SLTI 04452 1” 5 25453-SLTI 04453 1 1/4” 5 25454-SLTI 04454 1 1/2” 2 10455-SLTI 04455 2” 1 5456-SLTI 04456 2 1/2” --- 1457-SLTI 04457 3” --- 1458-SLTI 04458 3 1/2” --- 1459-SLTI 04459 4” --- 1

Die Cast Zinc469-LT2 15469 3/8” 25 100470-LT2 15470 1/2” 25 100471-LT2 15471 3/4” 10 50472-LT2 15472 1” 5 25473-LT2 15473 1 1/4” 5 25

Die Cast Zinc / Insulated Throat - 105°C469-LTI2 16469 3/8” 25 100470-LTI2 16470 1/2” 25 100471-LTI2 16471 3/4” 10 50472-LTI2 16472 1” 5 25473-LTI2 16473 1 1/4” 5 25

Cast Zinc474-LT2 15474 1 1/2” 2 10475-LT2 15475 2” --- 5476-LT2 15476 2 1/2” --- 1477-LT2 15477 3” --- 1478-LT2 15478 3 1/2” --- 1479-LT2 15479 4” --- 1

Cast Zinc / Insulated Throat - 105°C474-LTI2 16474 1 1/2” 2 10475-LTI2 16475 2” --- 5476-LTI2 16476 2 1/2” --- 1477-LTI2 16477 3” --- 1478-LTI2 16478 3 1/2” --- 1479-LTI2 16479 4” --- 1

Steel469-SLT 02469 3/8” 25 100470-SLT 02470 1/2” 25 100471-SLT 02471 3/4” 10 50472-SLT 02472 1” 5 25473-SLT 02473 1 1/4” 5 25474-SLT 02474 1 1/2” 2 10475-SLT 02475 2” --- 5Steel / Insulated Throat - 105°C469-SLTI 04469 3/8” 25 100470-SLTI 04470 1/2” 25 100471-SLTI 04471 3/4” 10 50472-SLTI 04472 1” 5 25473-SLTI 04473 1 1/4” 5 25474-SLTI 04474 1 1/2” 2 10475-SLTI 04475 2” --- 5Malleable Iron476-SLT 02476 2 1/2” --- 1477-SLT 02477 3” --- 1478-SLT 02478 3 1/2” --- 1479-SLT 02479 4” --- 1Malleable Iron / Insulated Throat - 105°C476-SLTI 04476 2 1/2” --- 1477-SLTI 04477 3” --- 1478-SLTI 04478 3 1/2” --- 1479-SLTI 04479 4” --- 1

Steel with Aluminum Lug469-SLTG 20469 3/8” 20 100470-SLTG 20470 1/2” 20 100471-SLTG 20471 3/4” 10 50472-SLTG 20472 1” 5 25473-SLTG 20473 1 1/4” 4 20474-SLTG 20474 1 1/2” 3 15475-SLTG 20475 2” 2 10Steel with Aluminum / Insulated Throat - 105°C469-SLTIG 24469 3/8” 20 100470-SLTIG 24470 1/2” 20 100471-SLTIG 24471 3/4” 10 50472-SLTIG 24472 1” 5 25473-SLTIG 24473 1 1/4” 4 20474-SLTIG 24474 1 1/2” 3 15475-SLTIG 24475 2” 2 10

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

Straight Non-Metallic429-NMLT 40429 3/8” 25 100430-NMLT 40430 1/2” 25 100431-NMLT 40431 3/4” 10 50432-NMLT 40432 1” 5 25433-NMLT 40433 1 1/4” 5 25434-NMLT 40434 1 1/2” 2 10435-NMLT 40435 2” 2 1090° Non-Metallic469-NMLT 40469 3/8” 25 100470-NMLT 40470 1/2” 25 100471-NMLT 40471 3/4” 10 50472-NMLT 40472 1” 5 25473-NMLT 40473 1 1/4” 2 10474-NMLT 40474 1 1/2” 2 10475-NMLT 40475 2” 2 10

Straight Non-Metallic430-NMLTS 44430 1/2” 25 100431-NMLTS 44431 3/4” 25 100

90° Non-Metallic470-NMLTS 44470 1/2” 10 100471-NMLTS 44471 3/4” 10 100

Zinc Die Cast4360-DC 94360 1/2” 25 1004361-DC 94361 3/4” 10 50To join metallic or non-metallic "Type "B" liquid tight to EMT.

Zinc Die Cast151-DC 09151 1/2” 25 100152-DC 09152 3/4” 25 100153-DC 09153 1” 10 50154-DC 09154 1 1/4” 5 25155-DC 09155 1 1/2” 2 20156-DC 09156 2” 2 20157-DC 09157 2 1/2” --- 10158-DC 09158 3” --- 5159-DC 09159 3 1/2” 1 5160-DC 09160 4” 1 5

Malleable Iron1121-RT 21121 1/2” 25 1001122-RT 21122 3/4” 10 1001123-RT 21123 1” 5 501124-RT 21124 1 1/4” --- 251125-RT 21125 1 1/2” --- 201126-RT 21126 2” --- 101127-RT 21127 2 1/2” --- 51128-RT 21128 3” --- 51129-RT 21129 3 1/2” --- 41130-RT 21130 4” --- 5

Steel / PVC Seal141 00141 1/2” 50 200142 00142 3/4” 25 100143 00143 1” 25 100144 00144 1 1/4” 25 100145 00145 1 1/2” 25 100146 00146 2” 25 100147 00147 2 1/2” 5 25148 00148 3” 5 25149 00149 3 1/2” 5 25150 00150 4” 5 25

Polyethylene With Steel RetainerSR-050 40490 1/2” 100 400SR-075 40491 3/4” 100 400SR-100 40492 1” 100 400SR-125 40493 1 1/4” 50 200SR-150 40494 1 1/2” 50 200SR-200 40495 2” 50 200SR-250 40496 2 1/2” --- 5SR-300 40497 3” --- 5SR-350 40498 3 1/2” --- 5SR-400 40499 4” --- 5

Zinc Die Cast595-DC2 15595 3/8” 15 60596-DC2 15596 3/8” 15 60

Zinc Die Cast / Insulated Throat - 90°C595-DCI2 16595 3/8” 15 60596-DCI2 16596 3/8” 15 60

Zinc Die Cast895-DC2 15895 3/8” 10 40

Zinc Die Cast / Insulated Throat – 90° C895-DCI2 16895 3/8” 10 40

Catalog UPC Trade Unit Std. Pkg.Number Number Size Qty. Qty.

ProductName

STEEL RAINTIGHT COMPRESSION CONNECTORS

STEEL RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, STRAIGHT

LIQUID TIGHT CONNECTORS, STRAIGHT

Steel

Malleable

LIQUID TIGHT CONNECTORSWITH GROUNDING LUG, STRAIGHT

ZINC RAINTIGHT COMPRESSION COUPLINGS

LIQUID TIGHT CONNECTORS, 45° (CON’T)

LIQUID TIGHT CONNECTORS, 90°

LIQUID TIGHT CONNECTORS, 90°

Steel

Malleable Iron

LIQUID TIGHT CONNECTORS WITHGROUNDING LUG, 90°

Steel withAluminum Lug

LIQUID TIGHT CONNECTORS, STRAIGHT & 90°

SCREW-ONLIQUID TIGHTCONNECTORS,STRAIGHT & 90°

429-NMLT

TYPE 4 Watertight

470-NMLT

SELF-ALIGNING, RAINTIGHTTHREE-PIECE CONDUIT COUPLINGS

LIQUID TIGHT SEALING RINGS

JACKETED MCAND TECK CABLECONNECTOR

90° JACKETED MCAND TECK CABLECONNECTOR

CONCRETETIGHT

RAINTIGHT

CONCRETETIGHT

RAINTIGHT

THREADED HUBS

SEALING LOCKNUTS

www.bptfittings.com

LIQUID TIGHT CONNECTORS, 45°

430-NMLTS

470-NMLTS

RAINTIGHT COMBINATION/TRANSITION COUPLINGS

260-SRT

260-USRT

250-SRT

250-USRT

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 2

Page 8: WEENGINEEREDTHEWATEROUTBY …beckersalesco.com/wp-content/uploads/2013/04/Bridgeport-raintight... · Bridgeport,havechosenthecolorbluefortheirsteelEMTraintight fittings.ExclusivetoBridgeportistheuseofthecolorblueontheir

Printed in the U.S.A.© 2009 Bridgeport Fittings, Inc. All rights reserved.

Distributed by:

Bridgeport Fittings, Inc.705 Lordship Blvd.Stratford, CT 06615-7313

Voice: 203.377.5944Fax: 203.381.3488E-mail: [email protected]

www.bptfittings.com

3/09 7500 BP078Cert no. XX-XXX-XXXXXX

lithographics

fpo

Raintight in all the sizes andconfigurations you need

Whatever the size and whatever the configuration,

Bridgeport has the raintight solution. You can get Bridgeport

innovations for cable, EMT and rigid conduit, with more

choices in 1/2” to 4” trade sizes. Our separate sealing

rings ensure a raintight seal and split-type compression

rings make for fast, reliable installation. With Bridgeport

UL-Listed raintight fittings, you can meet any code

and fill any specification. Bridgeport quality shines on

even the rainiest days.

Complete solutionsin zinc, steel andaluminum

ConsultBridgeport Catalog

WE ENGINEERED THE WATER OUT BYENGINEERING THE QUALITY IN

FIELD REACTION TO BRIDGEPORT RAINTIGHT

OTHER RAINTIGHT PRODUCTSCORD GRIP SOLUTIONS

UL REQUIREMENTSEffective March 2002, UL implemented a specification revision that caused

industry standard split ring compression connectors to be incapable of

passing UL testing. Bridgeport solved this design issue and became the

industry’s first manufacturer to meet the more stringent UL follow-up test

requirements, thereby ensuring their products consistently and effectively

excluded water. This allowed Bridgeport to mark their fittings “Raintight.”

Some manufacturers have elected to color code their raintight gland

nuts for identification purposes. A few manufacturers, including

Bridgeport, have chosen the color blue for their steel EMT raintight

fittings. Exclusive to Bridgeport is the use of the color blue on their

zinc compression raintight fittings.

“Having an easy way to visually identify isimportant. Inspectors in the Cities of Glendale,AZ and Phoenix, AZ are enforcing the NECrequirement for raceways in a wet location.”

Greg Wallace, President GWI Electric, Glendale Arizona

“In addition to being blue in color, Bridgeport’sUL Listed EMT fittings have the word Raintightcast into the fitting body, which makes it easy toconfirm the right fittings are being used.”

Bob White, Project Manager Rizzo Corporation,Danbury Connecticut

www.bptf itt ings.com

RAINTIGHT FITTINGS

RAINTIGHT DONE RIGHT.

NEC® REQUIREMENTSThe National Electrical Code® (NEC) provides requirements and

recommendations that govern this country’s wiring practices and

electrical installations. NEC articles and sections that detail the

use of conduit and cable products in a wet location are listed below.

NFPA 70®, National Electrical Code® and NEC® are registered trademarks of theNational Fire Protection Association, Quincy, MA.

NEC Articles358.42 Couplings and Connectors used with EMT shall be made up

tight. Where buried in masonry or concrete, they shall be concretetight

type. They shall be listed for use in wet locations and comply with

Article 314.15.

344.42 Couplings and Connectors. (A) Threadless couplings and

connectors used with conduit shall be made tight. Where buried in

masonry or concrete, they shall be the concretetight type. Where

installed in wet locations, they shall comply with 314.15. Threadless

couplings and connectors shall not be used on threaded conduit ends

unless listed for the purpose.

314.15 Damp or Wet Locations. In Damp or Wet Locations boxes,

conduit bodies, and fittings shall be placed or equipped so as to

prevent moisture from entering or accumulating within the box, conduit

body, or fitting. Boxes, conduit bodies, and fittings installed in wet

locations shall be listed for use in wet locations.

330.40 Boxes and Fittings. Fittings used for connecting Type

MC cable to boxes, cabinets, or other equipment shall be listed

and identified for such use.

Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007,National Fire Protection Association, Quincy, MA 02169. This reprinted material is notthe complete and official position of the NFPA on the referenced subject, which isrepresented only by the standard in its entirety.

1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 1