Weekly Training Report

Telkomsel IN Daily Report(template) 内部公开

04/08/2023 华为机密，未经许可不得扩散第1页，共20页

TELKOM IMS Training Report

Report Date 17 October 2011 Issue Date

Operatort Name: PT.Telekomunikasi Indonesia Tbk leader

CN Team

training material

Subject

No. material description

1.1 4 layer of architecture

1.2 function of IMS entities

1.3 reference point/protocol in IMS network describe the protocol use between NE in IMS network

1.4 Numbering and addresing

1.5 IMS advantage

2.1 typical signaling procedures

2.2 registration and related procedures

- Wilfan- Zukhri supriyono- Zulaikah- Rendy- Hari lo

1st day1. IMS network architecture2. IMS basic signaling overview3. SIP protocol overview

1.application 2.service capability3.session control4.bearer control and access

1.call control : S,I,P-CSCF2.user management : HSS,SLF3.Network interworking : MGCF,BGCF,IMS-MGW4.Media resource : MRFP,MRFC

1.identification user : IMPI and IMPU2.identification of network nodes3.public service identity

1.smile curve2.one terminal and one id can use for fixed and mobile network3.convergent service

1.local P-CSCF discovery2.serving-CSCF assignment3.registration procedure4.IP multimedia session procedure

1.procedures of local P-CSCF discovery2. procedures of S-CSCF assignment3. registration procedures



2.3 related concepts

2.4 session procedures

3.1 Session Related Protocol

3.2 SIP Message Type

3.3 SIP Message Structure

3.4 Header Fields

1.authentication2.home network and visited network3.service profile4.implicit registration,re-registration,3rd party registration

1.MO (Mobile origination)2.SS procedure3.MT procedure (mobile terminating)

1. SDP ( Session Description Protocol)2. RTP (Real-time Transmission Protocol)3. RTCP (Real-time Transmission Control Protocol)

Basic Request: INVITE, ACK, CANCEL, BYE, REGISTER< OPTIONExtended Request : MESSAGE, SUBSCRIBE, NOTIFY, UPDATE, PUBLISH, PRACK

1. Request line2. Message Header3. Message body

1. Basic header2. From & To3. Contact4. Call-ID & Cseq5. Record-Route and Route




17 October 2011

kongzhigang

training material

Subject

description time

9.00-13.00describe the protocol use between NE in IMS network

14.00-16.30

2.service capability

4.bearer control and access

1.call control : S,I,P-CSCF2.user management : HSS,SLF3.Network interworking : MGCF,BGCF,IMS-MGW4.Media resource : MRFP,MRFC

1.identification user : IMPI and IMPU2.identification of network nodes3.public service identity

2.one terminal and one id can use for fixed and mobile network3.convergent service

1.local P-CSCF discovery2.serving-CSCF assignment3.registration procedure4.IP multimedia session procedure

1.procedures of local P-CSCF discovery2. procedures of S-CSCF assignment3. registration procedures



14.00-16.30

16.30-18.00

2.home network and visited network

4.implicit registration,re-registration,3rd party registration

1.MO (Mobile origination)

3.MT procedure (mobile terminating)

1. SDP ( Session Description Protocol)2. RTP (Real-time Transmission Protocol)3. RTCP (Real-time Transmission Control Protocol)

Basic Request: INVITE, ACK, CANCEL, BYE, REGISTER< OPTIONExtended Request : MESSAGE, SUBSCRIBE, NOTIFY, UPDATE,

2. Message Header

5. Record-Route and Route






CN Team

training material

Subject


1.1 Header Fields

1.2 SIP Application in IMS

2.1 OSTA Indtroduction

2.2 Bord Introduction

- Hari Lo- Zukhri supriyono- Zulaikah- Rendy- Wilvan

2nd day1. Continue SIP Protocol 2. OSTA2.0 Hardware System3. CGP Introduction4. CGP General Operation and Maintenance

1.Via2.Supported3.Content Length/Content Type4.Expires5. Max Forwards and User Agent6. Extension Header

1.Main Procedure in IMS Application (session setup,media negotiotian)2.Route in IMS Signaling Flow

1. OSTA Platform 2. Rack 3. Hardware Components4. Full Rack Configuration (Integrated Rack, Service Rack, Network Rack)5. T8280 Sub Rack 6. Master Rack Monitoring Unit

1.Overview of OSTA board2.Equipment Management Subsystem3.Switching Subsystem4. Processor Subsystem5. Electromechanical Subsystem



2.3 Signaling Cable

2.4 Software Architecture

2.5 Alarm Flow

3.1 Product Positioning

3.2 Interfaces

3.3 Function and Features

3.4 System Architecture

4.1 iLMT introduction

4.2 OSTA Hardware O&M

4.3 KVM over IP

4.4 Serial Over IP 1. Serial over IP Operation

1. System Connection2. OMU Back Slot Bord Connection3. Cascading Mode4. Broadband Signaling Processing Board5. PDB Monitor Serial Cable Connection6. Connections Between iCG981/MediaX3600 and S2600F disk Array7. Connection Between HSS and S2600F Disk Array

1.Operating System2. Carrier Grade Platform (CGP)

1. Hardware Alarm Classification2. Board Alarm Report Path3. Disk Array Alarm Report Path4. Software Alarm Classification5. Software Alarm report Path

1.Location of the CGP2.Logging in to The CGP3.Navigation Tree4.CGP Client Interface5.CGP Processes

1. CGP Interfaces2. Northbound Interface3. Function of the Northbound Interface

1. CGP Function ( Manageing of Configuration, Performance, security, Log, signaling, and Fault)2. MML Command Saving3. FTTPS Function

1. CGP Software2. CGP Software Architecture3. Operation and Management Nes

1. Main Panel2. Device Panel3. Batch Command Operation4. Batch Command Setting5. Batch Command Execute6. Export ME Configuration File7. List Event Log File8. List Alarm Log File

1. Power System Checking2. Fan Box Checking3. Board Checking4. Port Checking

1. Login KVM over IP2. Login to the Board




18 October 2011

kongzhigang

training material

Subject

description time

9.00-10.30

10.30-14.30

3.Content Length/Content Type

5. Max Forwards and User Agent6. Extension Header

1.Main Procedure in IMS Application (session setup,media

2.Route in IMS Signaling Flow

3. Hardware Components4. Full Rack Configuration (Integrated Rack, Service Rack, Network

5. T8280 Sub Rack 6. Master Rack Monitoring Unit

1.Overview of OSTA board2.Equipment Management Subsystem3.Switching Subsystem4. Processor Subsystem5. Electromechanical Subsystem



10.30-14.30

14.30-17.00

17.00-18.00

1. Serial over IP Operation

1. System Connection2. OMU Back Slot Bord Connection3. Cascading Mode4. Broadband Signaling Processing Board5. PDB Monitor Serial Cable Connection6. Connections Between iCG981/MediaX3600 and S2600F disk

7. Connection Between HSS and S2600F Disk Array

1.Operating System2. Carrier Grade Platform (CGP)

1. Hardware Alarm Classification2. Board Alarm Report Path3. Disk Array Alarm Report Path4. Software Alarm Classification5. Software Alarm report Path

1.Location of the CGP2.Logging in to The CGP

4.CGP Client Interface

2. Northbound Interface3. Function of the Northbound Interface

1. CGP Function ( Manageing of Configuration, Performance, security, Log, signaling, and Fault)2. MML Command Saving

2. CGP Software Architecture3. Operation and Management Nes

3. Batch Command Operation4. Batch Command Setting5. Batch Command Execute6. Export ME Configuration File7. List Event Log File8. List Alarm Log File

1. Power System Checking2. Fan Box Checking

1. Login KVM over IP2. Login to the Board






CN Team

training material

Subject


1.1 IMS system operation by LMT

1.2 OSTA Hardware O&M

1.3 Software O&M

1.4 NE O&M

2.1 CGP Product overview


3rd day1. CGP General Operation & Maintenance2. SPG2800 Operation & Maintenance3. CSC3300 introduction

LMT use to configure & maintenance IMS core equipment, which provide :1.Device panel2.Batch command & export ME configuration3.Alarm log & Event Log

1.CGP Hardware O&M : Power system, Fan box, Board & Port Checking2.KVM Over IP : to monitor, control & operate a remote device through the local KVM in real time3.SOL Operation : Serial Over LAN, to login to the SMM board

1. Version Management 2.License Management3. Patch management

1.Alarm Management2.Log management3.Performance Management4. Monitor Management : CPU usage, disk usage,memory usage, memory dump, Module status, Port flow5. Signalling Trace

1.To provide universal service provisioning interface & WEB portal 2.located in the resource management &WEB portal3. Consist of system provisining system & portal system4. Support HSS, ATS, ENUM, MediaX5. Divided into 3 layers :NBI, SBI, & middle layer



2.2 Function & Feature

2.3 System O&M

3.1 CSC3300 Product orientation

3.2 CSC3300 Interface

3.3 CSC3000 Application & feature

1. System management : Security, Local configuration, log, license & space management2. Service configuration : ME, service provisioning, & policy management3. Batch management4. Service provisioning

1. SPG OM configuration2. SPG connect to ME confguration3. Add AS address4. configure user policy5. Importing iFC

1. Call controller in Huawei IMS2. Provide : Network authentication session control, Mobility management on Roaming, QoS control3. Logical function : P,I,S-CSCF, MRFC, OCG

1. interfaces of MRFC2. interfaces of CSC3300

1. support Fixed & wireless acces mode2. function : -subscriber registration- user authentication- topology hiding- SIP compression- Session ControlNumber analysis, etc




19 October 2011

kongzhigang

training material

Subject

description time

9.00-12.30

13.30 - 16.30

LMT use to configure & maintenance IMS core equipment, which

2.Batch command & export ME configuration3.Alarm log & Event Log

1.CGP Hardware O&M : Power system, Fan box, Board & Port

2.KVM Over IP : to monitor, control & operate a remote device through the local KVM in real time3.SOL Operation : Serial Over LAN, to login to the SMM board

1. Version Management 2.License Management3. Patch management

1.Alarm Management2.Log management3.Performance Management4. Monitor Management : CPU usage, disk usage,memory usage, memory dump, Module status, Port flow

1.To provide universal service provisioning interface & WEB portal 2.located in the resource management &WEB portal3. Consist of system provisining system & portal system4. Support HSS, ATS, ENUM, MediaX5. Divided into 3 layers :NBI, SBI, & middle layer



13.30 - 16.30

16.30-18.00

1. System management : Security, Local configuration, log, license & space management2. Service configuration : ME, service provisioning, & policy

3. Batch management4. Service provisioning

1. SPG OM configuration2. SPG connect to ME confguration

4. configure user policy

1. Call controller in Huawei IMS2. Provide : Network authentication session control, Mobility management on Roaming, QoS control3. Logical function : P,I,S-CSCF, MRFC, OCG

1. interfaces of MRFC2. interfaces of CSC3300

1. support Fixed & wireless acces mode

-subscriber registration- user authentication

Number analysis, etc






CN Team

training material

Subject


1.1 CSC3300 feature and function

1.2 CSC 3300 system and structure

2.1 Application types if the CSC3300 service boards

- Wilfan- Zukhri- Zulaikah- Rendy- Hari lo

4th day1. CSC3300 Product Introduction2. CSC3300 Data Configuration and Number Analysis3. Practical

Learn about CSC3300 feature and function such as:1. Number portability2. SIP Forking3. Session timer4. Embedded DNS/ENUM

Learn about CSC3300 system and structure such as hardaware and software structure.Hardware structure configuration mode:1. The CSC3300 uses a standalone rack.2. The CSC3300 shares a rack with other IMS products but uses a separate subrack. 3. The CSC3300 shares a subrack with other IMS products but uses a separate board 4. The CSC3300 shares a board with other IMS productsThe CSC3300 software includes the operating system, middleware, and various application software.

It is used to defined the process that can be configura at the board.1. CSCU = SCU+DEV 2. CSOCU = OCU+DEV3. CSSOU = SCU+OCU+DEV 4. CSCDB = CDB+DEV 5. CSBSU = BSU+DEV 6. CSDPU = DPU+DEV7. CSDSU =DPU+BSU+CDB+SCU+OCU+DEV 8. CSISU = DPU++BSU+CDB+SCU+OCU+DEV



2.2 Number Analysis to MGCF

3.1 Practical and trobleshooting

To MGCF means that the callee is not belong to IMS subscriber.Direction of the analysis is like below:Tel --- ADD SNRTANA --- ADD ARTANA --- ADD SRTADDR

Doing practical, making data configuration:1. ADD BRD2. ADD ME3. ADD PCSCF4. ADD ICSCF 5. ADD SCSCF 6. ADD MODULE7. ADD LDMI8. ADD TDMI9. ADD PADDR10. ADD PACN11. ADD IADDR12. ADD SADDR13. ADD IHSS14. ADD IHSSL15. ADD SHSS16. ADD SHSSL17. ADD PDNS18. ADD PDNSL19. ADD SDNS:20. ADD SDNSL21. ADD IDNS22. ADD IDNSL23. ADD ISCAP24. ADD SMPF25. MOD SREG26. ADD DNSE164Troubleshooting call fail:If command ADD DNS164 is inputting from the GUI, when the parameter REPL fill in with "\" script generate will be "\\". This why when we fill with "\\" the script that wil generate is "\\\\", makes the call failed.




20 October 2011

Kong Zhigang

training material

Subject

description time

9.00-13.00

14.00-16.30

Learn about CSC3300 feature and function such as:1. Number portability

4. Embedded DNS/ENUM

Learn about CSC3300 system and structure such as hardaware and software structure.Hardware structure configuration mode:1. The CSC3300 uses a standalone rack.2. The CSC3300 shares a rack with other IMS products but uses a

3. The CSC3300 shares a subrack with other IMS products but uses

4. The CSC3300 shares a board with other IMS productsThe CSC3300 software includes the operating system, middleware, and various application software.

It is used to defined the process that can be configura at the

1. CSCU = SCU+DEV 2. CSOCU = OCU+DEV3. CSSOU = SCU+OCU+DEV 4. CSCDB = CDB+DEV 5. CSBSU = BSU+DEV 6. CSDPU = DPU+DEV7. CSDSU =DPU+BSU+CDB+SCU+OCU+DEV 8. CSISU = DPU++BSU+CDB+SCU+OCU+DEV



14.00-16.30

16.30-18.00

To MGCF means that the callee is not belong to IMS subscriber.Direction of the analysis is like below:Tel --- ADD SNRTANA --- ADD ARTANA --- ADD SRTADDR

Doing practical, making data configuration:

Troubleshooting call fail:If command ADD DNS164 is inputting from the GUI, when the parameter REPL fill in with "\" script generate will be "\\". This why when we fill with "\\" the script that wil generate is "\\\\", makes






CN Team

training material

Subject


1.1 ATS9900 Product location

1.2 ATS9900 Interface

1.3 Function and Feature

1.4 System structure

2.1 ATS basic data configuration

2.2 Hardware data configuration

2.3 NE/Module and Local Data Configuration


5rd day1. ATS9900 Product Introduction2. ATS9900 Basic Data Configuration3. ATS9900 configuration practice

1.Position of ATS99002. PES AS (PSTN/ISDN Emulation Subsystem AS)3.PSS AS (PSTN/ISDN Simulation Subsystem AS)

1. Reference interface of ATS99002. Protocol of interface

1. Service provisioning (3rd party register and subscription update)2. Basic service function3. Supplementary service capabilities4. Operation and maintenance

1.Hardware of ATS99002. ATS9900 physical configuration3. Processes of ATS9900

1. ATS9900 data overview2. Overall flow

1.Hardware configuration flow2. Application type of ATS9900

1.Configuration flow2. ATS NE&Module information collecting3. ATS local data information collection



2.4 ATS number analisys configuration

2.5 Interworking data configuration

3.1 ATS9900 configuration practice

1. Configuration flow2. DN set3. Call Source4. Data planning

1.Configuration flow2. Add diameter device3. DNS concept4. Add and modify DNS 5.Add HTTP link to SPG28006. Add and modify MRF device

1. Configure ATS9900 hardware2. Configure application type3. Configure local data configuration4. Configure number analisys5. Configure interworking data configuration




21 October 2011

kongzhigang

training material

Subject

description time

9.00-12.00

14.30-16.30

1.Position of ATS99002. PES AS (PSTN/ISDN Emulation Subsystem AS)3.PSS AS (PSTN/ISDN Simulation Subsystem AS)

1. Reference interface of ATS99002. Protocol of interface

1. Service provisioning (3rd party register and subscription update)2. Basic service function3. Supplementary service capabilities4. Operation and maintenance

1.Hardware of ATS99002. ATS9900 physical configuration3. Processes of ATS9900

1. ATS9900 data overview

1.Hardware configuration flow2. Application type of ATS9900

1.Configuration flow2. ATS NE&Module information collecting3. ATS local data information collection



14.30-16.30

16.30-18.00

1. Configuration flow

1.Configuration flow2. Add diameter device

4. Add and modify DNS 5.Add HTTP link to SPG28006. Add and modify MRF device

1. Configure ATS9900 hardware2. Configure application type3. Configure local data configuration4. Configure number analisys5. Configure interworking data configuration

Documents

Weekly Training Report