interoperability.blob.core.windows.netinteroperability.blob.core.windows.net/files/MS-OXCDAT… · Web viewName Word value Field value Description ... control list failed because

[MS-OXCDATA]: Data Structures Protocol Specification

Intellectual Property Rights Notice for Open Specifications Documentation

Technical Documentation. Microsoft publishes Open Specifications documentation for protocols, file formats, languages, standards as well as overviews of the interaction among each of these technologies.

Copyrights. This documentation is covered by Microsoft copyrights. Regardless of any other terms that are contained in the terms of use for the Microsoft website that hosts this documentation, you may make copies of it in order to develop implementations of the technologies described in the Open Specifications and may distribute portions of it in your implementations using these technologies or your documentation as necessary to properly document the implementation. You may also distribute in your implementation, with or without modification, any schema, IDL’s, or code samples that are included in the documentation. This permission also applies to any documents that are referenced in the Open Specifications.

No Trade Secrets. Microsoft does not claim any trade secret rights in this documentation.

Patents. Microsoft has patents that may cover your implementations of the technologies described in the Open Specifications. Neither this notice nor Microsoft's delivery of the documentation grants any licenses under those or any other Microsoft patents. However, a given Open Specification may be covered by Microsoft's Open Specification Promise (available here: http://www.microsoft.com/interop/osp) or the Community Promise (available here: http://www.microsoft.com/interop/cp/default.mspx). If you would prefer a written license, or if the technologies described in the Open Specifications are not covered by the Open Specifications Promise or Community Promise, as applicable, patent licenses are available by contacting [email protected].

Trademarks. The names of companies and products contained in this documentation may be covered by trademarks or similar intellectual property rights. This notice does not grant any licenses under those rights.

Reservation of Rights. All other rights are reserved, and this notice does not grant any rights other than specifically described above, whether by implication, estoppel, or otherwise.

Tools. The Open Specifications do not require the use of Microsoft programming tools or programming environments in order for you to develop an implementation. If you have access to Microsoft programming tools and environments you are free to take advantage of them. Certain Open Specifications are intended for use in conjunction with publicly available standard specifications and network programming art, and assumes that the reader either is familiar with the aforementioned material or has immediate access to it.

Revision Summary

DateRevision History

Revision Class Comments

04/04/2008 0.1 Initial Availability.

1 / 122

[MS-OXCDATA] — v20090712 Data Structures Protocol Specification

Copyright © 2008 Microsoft Corporation.

Release: Sunday, July 12, 2009

mailto:[email protected]

http://www.microsoft.com/interop/cp/default.mspx

http://go.microsoft.com/fwlink/?LinkId=114384

DateRevision History

Revision Class Comments

04/25/2008 0.2 Revised and updated property names and other technical content.

06/27/2008 1.0 Initial Release.

08/06/2008 1.01 Revised and edited technical content.



04/10/2009 2.0 Updated technical content and applicable product releases.

07/15/2009 3.0 Major Revised and edited for technical content.

2 / 122




Table of Contents1 Introduction...................................................................................................6

1.1 Glossary.........................................................................................................................61.2 References.....................................................................................................................7

1.2.1 Normative References.............................................................................................71.2.2 Informative References............................................................................................8

1.3 Structure Overview........................................................................................................81.4 Relationship to Protocols and Other Structures.............................................................91.5 Applicability Statement..................................................................................................91.6 Versioning and Localization...........................................................................................91.7 Vendor-Extensible Fields................................................................................................9

2 Structures....................................................................................................102.1 Address Lists................................................................................................................10

2.1.1 AddressEntry.........................................................................................................102.1.2 AddressList............................................................................................................10

2.2 EntryID and Related Types...........................................................................................102.2.1 FID, MID, and GID..................................................................................................11

2.2.1.1 Folder ID (FID).................................................................................................112.2.1.2 Message ID (MID)............................................................................................112.2.1.3 GID..................................................................................................................11

2.2.1.3.1 Long Term EntryID Structure.....................................................................122.2.2 NNTP Newsgroup Folder EntryID Structure............................................................122.2.3 General EntryID Structure......................................................................................132.2.4 Messaging Object EntryIDs....................................................................................13

2.2.4.1 Folder EntryID..................................................................................................142.2.4.2 Message EntryID..............................................................................................152.2.4.3 Store Object EntryIDs......................................................................................16

2.2.5 Recipient EntryIDs.................................................................................................172.2.5.1 One-Off EntryID...............................................................................................172.2.5.2 Address Book EntryID......................................................................................192.2.5.3 Contact Address EntryID..................................................................................202.2.5.4 Personal Distribution List EntryID....................................................................21

2.3 EntryID Lists.................................................................................................................222.3.1 EntryList.................................................................................................................222.3.2 FlatEntry................................................................................................................232.3.3 FlatEntryList...........................................................................................................23

2.4 Error Codes..................................................................................................................242.4.1 Additional Error Codes...........................................................................................282.4.2 Property Error Codes..............................................................................................612.4.3 Warning Codes.......................................................................................................62

2.5 Flat UID........................................................................................................................662.5.1 FlatUID...................................................................................................................662.5.2 FlatUID_r................................................................................................................66

2.6 PropertyName..............................................................................................................662.6.1 PropertyName........................................................................................................672.6.2 PropertyName_r.....................................................................................................67

2.7 PropertyProblem..........................................................................................................682.8 PropertyProblemArray..................................................................................................682.9 PropertyRows...............................................................................................................69

2.9.1 PropertyRow...........................................................................................................692.9.1.1 StandardPropertyRow......................................................................................69

3 / 122




2.9.1.2 FlaggedPropertyRow........................................................................................702.9.1.3 PropertyRow_r.................................................................................................70

2.9.2 PropertyRowSet.....................................................................................................702.9.2.1 PropertyRowSet...............................................................................................712.9.2.2 PropertyRowSet_r............................................................................................71

2.9.3 RecipientRow.........................................................................................................712.9.3.1 RecipientFlags.................................................................................................712.9.3.2 RecipientRow...................................................................................................73

2.10 PropertyTag, PropertyId.............................................................................................742.11 PropertyTagArray.......................................................................................................75

2.11.1 PropertyTagArray.................................................................................................752.11.2 PropertyTagArray_r..............................................................................................75

2.12 Property Values..........................................................................................................752.12.1 Property Value Types...........................................................................................75

2.12.1.1 String Property Values...................................................................................782.12.1.2 Multi-Valued Property Value Instances...........................................................792.12.1.3 The PtypServerId Type...................................................................................792.12.1.4 PtypObject and PtypEmbeddedTable.............................................................792.12.1.5 WebDAV Property Value Types.......................................................................79

2.12.1.5.1 Multi-Valued WebDAV Property Value Types............................................872.12.1.6 OLE DB Types................................................................................................87

2.12.2 PropertyValue......................................................................................................882.12.2.1 PropertyValue................................................................................................882.12.2.2 PropertyValue_r.............................................................................................89

2.12.3 TypedPropertyValue.............................................................................................892.12.4 TaggedPropertyValue...........................................................................................892.12.5 FlaggedPropertyValue..........................................................................................902.12.6 FlaggedPropertyValueWithType...........................................................................902.12.7 TypedString..........................................................................................................91

2.13 Restrictions................................................................................................................912.13.1 AndRestriction.....................................................................................................93

2.13.1.1 AndRestriction...............................................................................................932.13.1.2 AndRestriction_r............................................................................................93

2.13.2 OrRestriction........................................................................................................932.13.2.1 OrRestriction..................................................................................................942.13.2.2 OrRestriction_r...............................................................................................94

2.13.3 NotRestriction......................................................................................................942.13.3.1 NotRestriction................................................................................................942.13.3.2 NotRestriction_r.............................................................................................95

2.13.4 ContentRestriction...............................................................................................952.13.4.1 ContentRestriction.........................................................................................952.13.4.2 ContentRestriction_r......................................................................................96

2.13.5 PropertyRestriction..............................................................................................972.13.5.1 PropertyRestriction........................................................................................972.13.5.2 PropertyRestriction_r...................................................................................100

2.13.6 ComparePropertiesRestriction...........................................................................1002.13.6.1 ComparePropertiesRestriction.....................................................................1002.13.6.2 ComparePropsRestriction_r.........................................................................103

2.13.7 BitMaskRestriction.............................................................................................1032.13.7.1 BitMaskRestriction.......................................................................................1032.13.7.2 BitMaskRestriction_r....................................................................................104

2.13.8 SizeRestriction...................................................................................................1042.13.8.1 SizeRestriction.............................................................................................1042.13.8.2 SizeRestriction_r..........................................................................................105

2.13.9 ExistRestriction..................................................................................................106

4 / 122




2.13.9.1 ExistRestriction............................................................................................1062.13.9.2 ExistRestriction_r.........................................................................................106

2.13.10 SubObjectRestriction.......................................................................................1062.13.10.1 SubObjectRestriction.................................................................................1072.13.10.2 SubRestriction_r........................................................................................107

2.13.11 CommentRestriction........................................................................................1072.13.12 CountRestriction..............................................................................................108

2.14 Sorting.....................................................................................................................1092.14.1 SortOrder...........................................................................................................1092.14.2 SortOrderSet......................................................................................................109

3 Structure Examples....................................................................................1113.1 Restriction Example...................................................................................................1113.2 PropertyRow Example................................................................................................117

4 Security Considerations..............................................................................119

5 Appendix A: Product Behavior.....................................................................120

6 Change Tracking.........................................................................................122

7 Index................................................................................................................................123

5 / 122




1 IntroductionCertain data structures appear repeatedly in different remote operations (ROPs) and property values, and in both store and address book protocols.

The Data Structures Protocol specifies certain common data structures that are used repeatedly in the ROPs specified in the remote operations (ROP) List and Encoding Protocol and in the Office Exchange Protocols Master Property List. This protocol includes structure layouts and semantics.

1.1 GlossaryThe following terms are defined in [MS-OXGLOS]:

address bookAddress Book objectsAddressEntryAddressListAugmented Backus-Naur Form (ABNF)big-endianbinary large object (BLOB)contactContact objectdistribution listEntryIDEntryListextended rulefolder ID (FID)Folder Objectglobal identifier (GID)GUIDHypertext Markup Language (HTML)little-endianLong ID (LID)LongTermIDmail userMailboxmessage ID (MID)Message objectmessage bodyMIMEmultiple-byte character set (MBCS)named propertyName Service Provider Interface (NSPI)Personal Distribution List objectPersonal Information Manager (PIM)plain textplain text message bodypublic folderproperty IDproperty tagproperty typeproperty setReceive folderremote operation (ROP)remote procedure callrecipient

6 / 122




recipient tablerestrictionreplicasearch foldersearch folder definition messagespecial folderstoreStore objectsubobjecttemplateTransport Neutral Encapsulation Format (TNEF)UnicodeWebDAVX500 DN

The following terms are specific to this document:

MAY, SHOULD, MUST, SHOULD NOT, MUST NOT: These terms (in all caps) are used as described in [RFC2119]. All statements of optional behavior use either MAY, SHOULD, or SHOULD NOT.

1.2 References

1.2.1 Normative ReferencesWe conduct frequent surveys of the normative references to assure their continued availability. If you have any issue with finding a normative reference, please contact [email protected]. We will assist you in finding the relevant information. Please check the archive site, http://msdn2.microsoft.com/en-us/library/E4BD6494-06AD-4aed-9823-445E921C9624, as an additional source.

[ISO-8601] International Organization for Standardization, "Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times", ISO 8601:2004, December 2004, http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=40874.

[MS-DTYP] Microsoft Corporation, "Windows Data Types", March 2007, http://go.microsoft.com/fwlink/?LinkId=111558.

[MS-NSPI] Microsoft Corporation, "Name Service Provider Interface (NSPI) Protocol Specification", June 2008.

[MS-OAUT] Microsoft Corporation, "OLE Automation Protocol Specification", March 2007, http://go.microsoft.com/fwlink/?LinkId=112419.

[MS-OXCNOTIF] Microsoft Corporation, "Core Notifications Protocol Specification", June 2008.

[MS-OXCROPS] Microsoft Corporation, "Remote Operations (ROP) List and Encoding Protocol Specification", June 2008.

[MS-OXCRPC] Microsoft Corporation, "Wire Format Protocol Specification", June 2008.

[MS-OXCTABL] Microsoft Corporation, "Table Object Protocol Specification", June 2008.

[MS-OXGLOS] Microsoft Corporation, "Exchange Server Protocols Master Glossary", June 2008.

7 / 122






http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=40874

http://msdn2.microsoft.com/en-us/library/E4BD6494-06AD-4aed-9823-445E921C9624

mailto:[email protected]


[MS-OXOAB] Microsoft Corporation, "Offline Address Book (OAB) Format and Schema Protocol Specification", June 2008.

[MS-OXOCNTC] Microsoft Corporation, "Contact Object Protocol Specification", June 2008.

[MS-OXOMSG] Microsoft Corporation, "E-Mail Object Protocol Specification", June 2008.

[MS-OXORULE] Microsoft Corporation, "E-Mail Rules Protocol Specification", June 2008.

[MS-OXOSFLD] Microsoft Corporation, "Special Folders Protocol Specification", June 2008.

[MS-OXOSRCH] Microsoft Corporation, "Search Folder List Configuration Protocol Specification", June 2008.

[MS-OXPROPS] Microsoft Corporation, "Exchange Server Protocols Master Property List Specification", June 2008.

[MS-XWDSEARCH] Microsoft Corporation, "WebDAV Extensions for Search", December 2008.

[RFC1123] Braden, R., "Requirements for Internet Hosts – Application and Support", RFC 1123, October 1989, http://www.ietf.org/rfc/rfc1123.txt.

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997, http://www.ietf.org/rfc/rfc2119.txt.

[RFC3986] Berners-Lee, T., Fielding, R., and Masinter, L., "Uniform Resource Identifier (URI): Generic Syntax", RFC 3986, January 2005, http://www.ietf.org/rfc/rfc3986.txt.

[RFC4122] Leach, P., Mealling, M., Salz, R., "A Universally Unique Identifier (UUID) Namespace", RFC 4122, July 2005, http://www.ietf.org/rfc/rfc4122.txt.

[RFC4234] Crocker, D., Ed. and Overell, P., "Augmented BNF for Syntax Specifications: ABNF", RFC 4234, October 2005, http://www.ietf.org/rfc/rfc4234.txt.

[W3C-XML] World Wide Web Consortium, "XML Schema (Second Edition)", October 2004, http://www.w3.org/XML/Schema.

1.2.2 Informative ReferencesNone.

1.3 Structure OverviewThe Data Structures Protocol specifies several commonly used data structures. These structures are primarily concerned with property values, folder and Message object identifiers, and folder queries.

There are some apparent redundancies; for example, EntryIDs are specified in several different ways in section 2.2. This is because information is formatted differently in different contexts. For example, store EntryIDs are formatted differently in the context of a remote operation (ROP) than in the context of a binary property value created by clients.

As a rule, integers in the data structures here specified are transmitted in little-endian byte order, with the least significant byte first. But when individual bits within a byte field are specified, they are

8 / 122




http://www.w3.org/XML/Schema

http://www.ietf.org/rfc/rfc4234.txt





numbered starting with the most significant bit. Therefore, in a 1-byte field, bit 0 is the 0x80 bit, bit 1 is the 0x40 bit, and bit 7 ix the 0x01 bit.

1.4 Relationship to Protocols and Other StructuresThis specification defines structures used by more than one of the ROPs as specified in [MS-OXCROPS]. It also defines structures used by more than one of the PIM object type specifications, such as [MS-OXOMSG] and the protocols that extend it.

The descriptions and list of properties in [MS-OXPROPS] provides context for many of the structures defined in this specification.

1.5 Applicability StatementThis specification applies to communication between clients and mailbox or public folder <1> servers via the protocol as specified in [MS-OXCRPC].

1.6 Versioning and LocalizationNone.

1.7 Vendor-Extensible FieldsNone.

9 / 122




2 Structures

2.1 Address ListsIn the context of a ROP, addressees or recipients of a Message object are represented either by a few property values or by a RecipientRow structure. In certain other contexts, such as in saved search folder criteria, addressees are represented less compactly by counted lists of property tags and values, called AddressList.

2.1.1 AddressEntryAn AddressEntry is a set of properties representing one addressee.

PropertyCount (4 bytes): A 32-bit unsigned integer giving the number of TaggedPropertyValues to follow. Please refer to section 2.12.4 for the specification of TaggedPropertyValue.

Values (variable): 'PropertyCount' TaggedPropertyValue structures representing one addressee.

2.1.2 AddressListAn AddressList is simply a counted set of AddressEntry structures. Each AddressEntry represents one addressee.

AddressCount (4 bytes): A 32-bit unsigned integer giving the number of addressees to follow.

Addresses (variable size): 'AddressCount' AddressEntry structures.

2.2 EntryID and Related TypesEntryID is an abstraction of an identifier for many different types of objects including folders, messages, recipients, address book entries, and message stores.

For the most common ROPs, concrete identifiers such as folder ID and message ID – which are much more compact than EntryID – are used instead. However, in many cases, EntryIDs are stored as part or all of a binary property value; for example:

Address book IDs are stored in the PidTagSentRepresentingEntryId property of a Message object.

10 / 122




Address book and one-off EntryIDs are stored in the PidTagEntryId property of a recipient.

Contact address EntryIDs are stored in the PidLidDistributionListMembers property of a contact distribution list.

This section first describes the compact FID, MID, and GID structures, then the general EntryID structure, followed by folder, message, and Store object EntryIDs, and finally recipient EntryIDs.

2.2.1 FID, MID, and GIDThese are compact structures used in ROPs where the Store object context of the objects they refer to is known.

2.2.1.1 Folder ID (FID)A folder ID uniquely identifies a folder in the context of a logon to a Store object. The folder ID is serialized compactly in the context of a ROP, such as RopOpenFolder <2>, where the Store object context is already established. It is an 8-byte structure:

ReplicaId (2 bytes): A 16-bit unsigned integer identifying a Store object.

GlobalCounter (6 bytes): An unsigned 48-bit integer identifying the folder within its Store object.

2.2.1.2 Message ID (MID)A message ID uniquely identifies a message in the context of a logon to a Store object. The message ID is serialized compactly in the context of a ROP, such as RopOpenMessage <3>, where the Store object context is already established. It is an 8-byte structure:

ReplicaId (2 bytes): A 16-bit unsigned integer identifying a Store object.

GlobalCounter (6 bytes): An unsigned 48-bit integer identifying the message within its Store object.

2.2.1.3 GIDA GID identifies a folder or message in a Store object. It differs from a FID or MID in that the ReplicaId is replaced by the corresponding Store object's GUID. The last fields of a folder or message EntryID are effectively a GID.

11 / 122




DatabaseGuid (16 bytes): A 128-bit unsigned integer identifying a Store object.

GlobalCounter (6 bytes): An unsigned 48-bit integer identifying the folder within its Store object.

2.2.1.3.1 Long Term EntryID StructureA Long Term EntryID (also referred to as a LongTermID) is a GID, as defined in section 2.2.1.3, plus a 2-byte Pad field containing "0x0000". The total length of the Long Term EntryID is 24 bytes.

Long Term EntryIDs can be generated from the MID and FID by using RopLongTermIdFromId. Going the other way, MID and FID can be generated from their Long Term EntryIDs by using RopIdFromLongTermId. See [MS-OXCROPS] for the ROP specifications.

2.2.2 NNTP Newsgroup Folder EntryID StructureThe NNTP Newsgroup Folder EntryID identifies a newsgroup folder in a public store. <4>

Flags (4 bytes): MUST be set to 0x00000000.

ProviderUID (16 bytes): MUST be set to %x38.A1.BB.10.05.E5.10.1A.A1.BB.08.00.2B.2A.56.C2.

FolderType (2 bytes): MUST be set to 0x000C.

NewsgroupName (variable): The name of the newsgroup formatted as a null-terminated string of 8-bit characters.

12 / 122




2.2.3 General EntryID StructureAn EntryID carries a sequence of bytes used to identify and access an object. Note that the length of an EntryID is specified externally, not in the structure itself.

Flags (4 bytes): MUST be set to "0x00000000". Bits in this field indicate under what circumstances a short-term EntryID is valid. However, in any EntryID stored in a property value, these 4 bytes MUST be zero indicating a long-term EntryID.

ProviderUID (16 bytes): Identifies the provider that created the EntryID, and used to route EntryIDs to the correct provider. A table of values for this field appears below at Table 1.

ProviderData (variable): Provider-specific data, further specified below for several different types.

The following table specifies possible values for the ProviderUID field.

EntryID UID type ProviderUID value

object in private store MUST be set to the MailboxGuid field value provided in the RopLogon response buffer, as specified in [MS-OXCROPS].

object in public store %x1A. 44.73.90.AA.66.11.CD.9B.C8.00.AA.00.2F.C4.5A

Address book recipient %xDC.A7.40.C8.C0.42.10.1A.B4.B9.08.00.2B.2F.E1.82

One-off recipient %x81.2B.1F.A4.BE.A3.10.19.9D.6E.00.DD.01.0F.54.02

Contact address or personal distribution list recipient

%xFE.42.AA.0A.18.C7.1A.10.E8.85.0B.65.1C.24.00.00

2.2.4 Messaging Object EntryIDsAll EntryIDs for objects in a Store object include, at the beginning of the ProviderData field, a 16-bit unsigned integer indicating the type of object to which the EntryID corresponds. Here are the valid values for that type.

Store object type (alternate name) Hexadecimal value

PrivateFolder(eitLTPrivateFolder)

0x0001%x01.00

13 / 122




Store object type (alternate name) Hexadecimal value

PublicFolder(eitLTPublicFolder)

0x0003%x03.00

MappedPublicFolder(eitLTWackyFolder)

0x0005%x05.00

PrivateMessage(eitLTPrivateMessage)

0x0007%x07.00

PublicMessage(eitLTPublicMessage)

0x0009%x09.00

MappedPublicMessage(eitLTWackyMessage)

0x000B%x0B.00

PublicNewsgroupFolder(eitLTPublicFolderByName)

0x000C%x0c.00

2.2.4.1 Folder EntryIDIn the context of an EntryID, a folder ID looks quite different than in the context of a ROP. The ReplicaId is mapped to a DatabaseGuid; the RopLongTermIdFromId operation supports this mapping. This less compact format is necessary because no assumptions can be made about the Store object context in which a folder EntryID is used.

Flags (4 bytes): MUST be zero.

Provider UID (16 bytes): For a folder in a private mailbox MUST be set to the MailboxGuid field value from the RopLogon response buffer. For a folder in the public store MUST be set to %x1A.44.73.90.AA.66.11.CD.9B.C8.00.AA.00.2F.C4.5A.

14 / 122




FolderType (2 bytes): One of several types as specified in Table 2 above.

DatabaseGuid (16 bytes): A GUID associated with the Store object, and corresponding to the ReplicaId field of the FID.

GlobalCounter (6 bytes): An unsigned 48-bit integer identifying the folder.

Pad (2 bytes): MUST be zero.

2.2.4.2 Message EntryIDIn the context of an EntryID, a message ID looks quite different than in the context of a ROP. The DatabaseReplicationId is mapped to a MessageDatabaseGuid (perhaps using the RopLongTermIdFromId operation) and the whole ID is prefixed with flags and a provider UID. In addition, the folder ID of the folder in which the message resides is included.

Flags (4 bytes): MUST be "0x00000000".

ProviderUID (16 bytes): For a folder in a private mailbox MUST be set to the MailboxGuid field value from the RopLogon response buffer. For a folder in the public store MUST be set to "%x1A.44.73.90.AA.66.11.CD.9B.C8.00.AA.00.2F.C4.5A".

MessageType (2 bytes): One of several types as specified in Table 2 above.

15 / 122




FolderDatabaseGuid (16 bytes): A GUID associated with the Store object of the folder in which the message resides, and corresponding to the DatabaseReplicationId field of the folder ID.

FolderGlobalCounter (6 bytes): An unsigned 48-bit integer identifying the folder in which the message resides.


MessageDatabaseGuid (16 bytes): A GUID associated with the Store object of the message and corresponding to the DatabaseReplicationId field of the message ID.

MessageGlobalCounter (6 bytes): An unsigned 48-bit integer identifying the message.


2.2.4.3 Store Object EntryIDsA Store object EntryID identifies a mailbox Store object or a public folder Store object itself, rather than a message or folder object residing in such a database. It is used in certain property values.


ProviderUID (16 bytes): MUST be %x38.A1.BB.10.05.E5.10.1A.A1.BB.08.00.2B.2A.56.C2

Version (1 byte): MUST be zero.

Flag (1 byte): MUST be zero.

16 / 122




DLLFileName (variable): MUST be set to the following value which represents "emsmdb.dll": %x45.4D.53.4D.44.42.2E.44.4C.4C.00.00.00.00

WrappedFlags (4 bytes): MUST be 0x00000000.

WrappedProvider UID (16 bytes): MUST be one of the following values:

Store object type ProviderUID value

Mailbox Store object %x1B.55.FA.20.AA.66.11.CD.9B.C8.00.AA.00.2F.C4.5A

Public folder Store object %x1C.83.02.10.AA.66.11.CD.9B.C8.00.AA.00.2F.C4.5A

WrappedType (4 bytes): MUST be %x0C.00.00.00 for a mailbox store, or %x06.00.00.00 for a public store.

ServerShortname (variable): A string of single-byte characters terminated by a single zero byte, indicating the shortname or NetBIOS name of the server.

MailboxDN (variable): A string of single-byte characters terminated by a single zero byte and representing the X500 DN of the mailbox, as specified in [MS-OXOAB]. This field is present only for mailbox databases.

2.2.5 Recipient EntryIDs

2.2.5.1 One-Off EntryIDOne-off EntryIDs are used to hold information about recipients that do not exist in the directory. All information about a one-off recipient is contained in the EntryID itself.


17 / 122




ProviderUID (16 bytes): MUST be "%x81.2B.1F.A4.BE.A3.10.19.9D.6E.00.DD.01.0F.54.02".

Version (2 bytes): MUST be "0x0000".

Pad (1bit): Reserved (mask 0x8000), MUST be b'0'.

MAE (2 bits): (2-bit flag, mask 0x0C00) The encoding used for Mac attachments, as specified in the following table.

NameWord value

Field value Description

BinHex 0x0000 b'00' BinHex encoded.

UUENCODE 0x0020 b'01' UUENCODED. Not valid if the message is in MIME, in which case the flag will be ignored and BinHex used instead.

AppleSingle 0x0040 b'10' Apple Single encoded. Allowed only when the message format is MIME.

AppleDouble

0x0060 b'11' Apple Double encoded. Allowed only when the message format is MIME.

Format (4 bits): (4-bit enumeration, mask 0x1E00) The message format desired for this recipient, as specified in the following table.

Name Word value

Field value Description

TextOnly 0x0006 b'0011' Send a plain text message body.

HtmlOnly 0x000E b'0111' Send an HTML message body.

TextAndHtml

0x0016 b'1011' Send a multipart/alternative body with both plain text and HTML.

M (1 bit): 1-bit flag (0x0100 ). If b'0', recipient prefers to receive messages in TNEF format; if b'1', recipient prefers to receive messages in MIME format.

U (1 bit): 1-bit flag (0x0080). If b'1', the string fields following are in Unicode (UTF-16) with two-byte null terminators; if b'0', the string fields following are MBCS characters terminated by a single 0 byte.

R (2 bits): Reserved (mask 0x0060), MUST be b'00'.

L (1 bit): 1-bit flag (0x0010). If b'1', server SHOULD NOT attempt to look up this user's e-mail address in the address book.

Pad (4 bits): Reserved (mask 0x000F), MUST be b'0000'.

DisplayName (variable): The recipient's display name (in the recipient table, PidTagDisplayName ) as a null-terminated string. If the U field is b'1', the null terminator is 2 bytes long; otherwise, 1 byte.

AddressType (variable): The recipient's e-mail address type (in the recipient table, PidTagAddressType) as a null-terminated string. If the U field is b'1', the null terminator is 2 bytes long; otherwise, 1 byte.

18 / 122




EmailAddress (variable): The recipient's e-mail address (in the recipient table, PidTagEmailAddress) as a null-terminated string. If the U field is b'1', the null terminator is 2 bytes long; otherwise, 1 byte.

2.2.5.2 Address Book EntryIDAddress book EntryIDs can represent several types of Address Book objects including individual users, distribution lists, containers, and templates as specified in table 4.


ProviderUID (16 bytes): MUST be "%xDC.A7.40.C8.C0.42.10.1A.B4.B9.08.00.2B.2F.E1.82". (Directory)

Version (4 bytes): MUST be set to "%x01.00.00.00".

Value (hex bytes Address book EntryID type

0x00000000%x00.00.00.00

Local mail user

0x00000001%x01.00.00.00

Distribution list

0x00000002%x02.00.00.00

Bulletin board or public folder

0x00000003%x03.00.00.00

Automated mailbox

0x00000004%x04.00.00.00

Organizational mailbox

0x00000005%x05.00.00.00

Private distribution list

0x00000006 Remote mail user

19 / 122




Value (hex bytes Address book EntryID type

%x06.00.00.00

0x00000100%x00.01.00.00

Container

0x00000101%x01.01.00.00

Template

0x00000102%x02.01.00.00

One-off user

0x00000200%x00.02.00.00

Search

X500DN (variable): The X500 DN of the Address Book object. X500DN is a null-terminated string of 8-bit characters.

2.2.5.3 Contact Address EntryIDContact Address EntryIDs represent recipients whose information is stored in a Contact object, as specified in [MS-OXOCNTC].

Flags (4 bytes): MUST be "%x00.00.00.00".

ProviderUID (16 bytes): MUST be "%xFE.42.AA.0A.18.C7.1A.10.E8.85.0B.65.1C.24.00.00".

Version (4 bytes): MUST be "%x03.00.00.00".

Type (4 bytes): MUST be "%x04.00.00.00".

Index (4 bytes): 4-byte unsigned integer value. This value MUST be a number between "0" and "5" (inclusive) and represents which electronic address in the contact information to use. A value of "0",

20 / 122




"1", and "2" represents Email1, Email2, and Email3 respectively, and a value of "3", "4", and "5" represents Fax1, Fax2 and Fax3 respectively. For more information, see [MS-OXOCNTC].

EntryIdCount (4 bytes): 4-byte unsigned integer value representing the count of bytes in the EntryIdBytes field.

EntryIdBytes (variable): EntryID of the Contact object that contains this address, which in turn has a format specified in section 2.2.4.2. The size of this structure is specified by the EntryIdCount field <5>.

2.2.5.4 Personal Distribution List EntryIDThe Personal Distribution List EntryIDs represents recipients whose information is stored in a Personal Distribution List object, as specified in [MS-OXOCNTC].

Flags (4 bytes): MUST be"%x00.00.00.00".

ProviderUID (16 bytes): MUST be "%xFE.42.AA.0A.18.C7.1A.10.E8.85.0B.65.1C.24.00.00".

Version (4 bytes): MUST be "%x03.00.00.00".

Type (4 bytes): MUST be "%x05.00.00.00".

Index (4 bytes): MUST be "%xFF.00.00.00".

EntryIdCount (4 bytes): 4-byte unsigned integer value representing the count of bytes in the EntryIdBytes field.

EntryIdBytes (variable): EntryID of the Personal Distribution List object to which this address refers, which in turn has the format specified in 2.2.4.2. The size of this structure is specified by the EntryIdCount field <6>.

21 / 122




2.3 EntryID Lists

2.3.1 EntryListEntryList is used in search folder criteria to serialize a list of EntryIDs. Briefly, there are three parts to this structure:

The count of entries in the list

"Count" structures giving the length of individual entries

Data for each of the individual entries

EntryCount (4 bytes): An unsigned 32-bit integer giving the number of EntryIDs in the list. It MUST be followed by that many EntryLength and that many EntryID structures.

Pad (4 bytes): Can be any value; clients and servers MUST ignore the value.

EntryLength (EntryCount * 8 bytes): A series of EntryCount pairs: an unsigned 32-bit integer giving the size of one EntryID, followed by 4-byte pad that can have any value.

EntryIDs (variable size): A series of EntryCount EntryIDs. There is no padding between EntryIDs. The length of the i-th EntryID is specified by the first 32 bits of the i-th element of the EntryLength.

2.3.2 FlatEntryA FlatEntry structure is simply the size of an EntryID, followed by the EntryID itself, for ease of serialization.

Size (4 bytes): An unsigned 32-bit integer giving the size of the following EntryID, not including the Size field itself.

EntryID: The EntryID itself. It MUST be exactly Size bytes long.

22 / 122




2.3.3 FlatEntryListA FlatEntryList gives the number of EntryIDs and their total size, followed by a series of FlatEntry structures.

Count (4 bytes): An unsigned 32-bit integer giving the number of FlatEntry structures in the list.

Size (4 bytes): The total size of all the FlatEntry structures, not including the Count and Size fields themselves.

FlatEntries (variable size): A series of FlatEntry structures with the actual EntryID data. There MUST be exactly Count structures, and their total size MUST be exactly Size.

2.4 Error CodesWhen encoded in ROP buffers, all error codes are transmitted as 32-bit integers in little-endian format. Error codes are presented in the following table.

Name Description (alternate names)Numeric value (hex)

Success The operation succeeded.(S_OK, SUCCESS_SUCCESS)

00000000,%x00.00.00.00

GeneralFailure The operation failed for an unspecified reason (E_FAIL, MAPI_E_CALL_FAILED, ecError, SYNC_E_ERROR)

80004005,%x05.40.00.80

OutOfMemory Not enough memory was available to complete the operation (E_NOMEMORY, MAPI_E_NOT_ENOUGH_MEMORY, ecMAPIOOM, ecPropSize)

8007000E,%x0E.00.07.80

InvalidParameter An invalid parameter was passed to a remote procedure call (E_INVALIDARG, MAPI_E_INVALID_PARAMETER, ecInvalidParam, ecInvalidSession, ecBadBuffer, SYNC_E_INVALID_PARAMETER)

80070057,%x57.00.07.80

NoInterface The requested interface is not supported (E_NOINTERFACE, MAPI_E_INTERFACE_NOT_SUPPORTED, ecinterfacenotsupported)

80004002%x02.40.00.80

AccessDenied The caller does not have sufficient access rights to perform the operation (E_ACCESSDENIED, MAPI_E_NO_ACCESS, ecaccessdenied, ecpropsecurityviolation)

80070005,%x05.00.07.80

NotSupported The server does not support this method call.(MAPI_E_NO_SUPPORT, ecNotSupported, ecNotImplemented)

80040102,%x02.01.04.80

23 / 122





InvalidCharacterWidth Unicode characters were requested when only 8-bit characters are supported, or vice versa.(MAPI_E_BAD_CHARWIDTH, ecBadCharwidth)

80040103,%x03.01.04.80

StringTooLong In the context of this method call, a string exceeds the maximum permitted length.(MAPI_E_STRING_TOO_LONG, ecStringTooLarge)

80040105,%x05.01.04.80

InvalidFlag An unrecognized flag bit was passed to a method call.(MAPI_E_UNKNOWN_FLAGS, ecUnknownFlags, SYNC_E_UNKNOWN_FLAGS)

80040106,%x06.01.04.80

InvalidEntryID An incorrectly formatted EntryID was passed to a method call.(MAPI_E_INVALID_ENTRYID, ecInvalidEntryId)

80040107, %x07.01.04.80

InvalidObject A method call was made using a reference to an object that has been destroyed or is not in a viable state.(MAPI_E_INVALID_OBJECT, ecInvalidObject)

80040108,%x08.01.04.80

ObjectChanged An attempt to commit changes failed because the object was changed separately.(MAPI_E_OBJECT_CHANGED, ecObjectModified)

80040109,%x09.01.04.80

ObjectDeleted An operation failed because the object was deleted separately.(MAPI_E_OBJECT_DELETED, ecObjectDeleted)

8004010A,%x0A.01.04.80

ServerBusy A table operation failed because a separate operation was in progress at the same time.(MAPI_E_BUSY, ecBusy)

8004010B,%x0B.01.04.80

OutOfDisk Not enough disk space was available to complete the operation.(MAPI_E_NOT_ENOUGH_DISK, ecDiskFull)

8004010D,%x0D.01.04.80

OutOfResources Not enough of an unspecified resource was available to complete the operation.(MAPI_E_NOT_ENOUGH_RESOURCES, ecInsufficientResrc)

8004010E,%x0E.01.04.80

NotFound The requested object could not be found at the server.(MAPI_E_NOT_FOUND, ecNotFound, ecAttachNotFound, ecUnknownRecip, ecPropNotExistent)

8004010F,%x0F.01.04.80

VersionMismatch Client and server versions are not compatible.(MAPI_E_VERSION, ecVersionMismatch, ecVersion)

80040110,%x10.01.04.80

LogonFailed A client was unable to log on to the server.(MAPI_E_LOGON_FAILED, ecLoginFailure)

80040111,%x11.01.04.80

TooManySessions A server or service is unable to create any more sessions.(MAPI_E_SESSION_LIMIT, ecTooManySessions)

80040112,%x12.01.04.80

24 / 122





UserCanceled An operation failed because a user cancelled it.(MAPI_E_USER_CANCEL, ecUserAbort)

80040113,%x13.01.04.80

AbortFailed A RopAbort <7> or RopAbortSubmit <8> request was unsuccessful.(MAPI_E_UNABLE_TO_ABORT, ecUnableToAbort)

80040114,%x14.01.04.80

NetworkError An operation was unsuccessful because of a problem with network operations or services.(MAPI_E_NETWORK_ERROR, ecNetwork)

80040115,%x15.01.04.80

DiskError There was a problem writing to or reading from disk.(MAPI_E_DISK_ERROR, ecWriteFault, ecReadFault)

80040116,%x16.01.04.80

TooComplex The operation requested is too complex for the server to handle; often applied to restrictions.(MAPI_E_TOO_COMPLEX, ecTooComplex)

80040117,%x17.01.04.80

InvalidColumn The column requested is not allowed in this type of table.(MAPI_E_BAD_COLUMN)

80040118,%x18.01.04.80

ComputedValue A property cannot be updated because it is read-only, computed by the server.(MAPI_E_COMPUTED, ecComputed)

8004011A,%x1A.01.04.80

CorruptData There is an internal inconsistency in a database, or in a complex property value.(MAPI_E_CORRUPT_DATA, ecCorruptData)

8004011B,%x1B.01.04.80

InvalidCodepage The server is not configured to support the code page requested by the client.(MAPI_E_UNKNOWN_CPID)

8004011E,%x1E.01.04.80

InvalidLocale The server is not configured to support the locale requested by the client.(MAPI_E_UNKNOWN_LCID)

8004011F,%x1F.01.04.80

TimeSkew The operation failed due to clock skew between servers.(MAPI_E_INVALID_ACCESS_TIME, ecTimeSkew)

80040123,%x23.01.04.80

EndOfSession Indicates that the server session has been destroyed, possibly by a server restart.(MAPI_E_END_OF_SESSION)

80040200,%x00.02.04.80

UnknownEntryId Indicates that the EntryID passed to OpenEntry was created by a different MAPI provider.(MAPI_E_UNKNOWN_ENTRYID)

80040201,%x01.02.04.80

NotCompleted A complex operation such as building a table row set could not be completed.(MAPI_E_UNABLE_TO_COMPLETE, ecUnableToComplete)

80040400,%x00.04.04.80

Timeout An asynchronous operation did not succeed within the 80040401,

25 / 122





specified timeout.(MAPI_E_TIMEOUT, ecTimeout) %x01.04.04.80

EmptyTable A table essential to the operation is empty.(MAPI_E_TABLE_EMPTY, ecTableEmpty)

80040402,%x02.04.04.80

TableTooBig The table is too big for the requested operation to complete.(MAPI_E_TABLE_TOO_BIG, ecTableTooBig)

80040403,%x03.04.04.80

InvalidBookmark The bookmark passed to a table operation was not created on the same table.(MAPI_E_INVALID_BOOKMARK, ecInvalidBookmark)

80040405,%x05.04.04.80

ErrorWait A wait timeout has expired.(MAPI_E_WAIT, ecWait)

80040500,%x00.05.04.80

ErrorCancel The operation had to be canceled,(MAPI_E_CANCEL, ecCancel)

80040501,%x01.05.04.80

NoSuppress The server does not support the suppression of read receipts.(MAPI_E_NO_SUPPRESS)

80040602,%x02.06.04.80

CollidingNames A folder or item cannot be created because one with the same name or other criteria already exists.(MAPI_E_COLLISION, ecDuplicateName)

80040604,%x04.06.04.80

NotInitialized The subsystem is not ready.(MAPI_E_NOT_INITIALIZED, ecNotInitialized)

80040605, %x05.06.04.80

NoRecipients A message cannot be sent because it has no recipients.(MAPI_E_NO_RECIPIENTS)

80040607,%x07.06.04.80

AlreadySent A message cannot be opened for modification because it has already been sent.(MAPI_E_SUBMITTED, ecSubmitted)

80040608,%x08.06.04.80

HasFolders A folder cannot be deleted because it still contains subfolders.(MAPI_E_HAS_FOLDERS, ecFolderHasChildren)

80040609,%x09.06.04.80

HasMessages A folder cannot be deleted because it still contains messages.(MAPI_E_HAS_MESSAGES, ecFolderHasContents)

8004060A,%x0A.06.04.80

FolderCycle A folder move or copy operation would create a cycle (typically when the request is to copy a parent folder to one of its subfolders).(MAPI_E_FOLDER_CYCLE, ecRootFolder)

8004060B,%x0B.06.04.80

TooManyLocks Too many locks have been requested.(MAPI_E_LOCKID_LIMIT, ecLockIdLimit)

8004060D,%x0D.06.04.80

AmbiguousRecipient An unresolved recipient matches more than one entry in the 80040700,

26 / 122





directory.(MAPI_E_AMBIGUOUS_RECIP, ecAmbiguousRecip) %x00.07.04.80

ObjectDeleted The requested object was previously deleted.(SYNC_E_OBJECT_DELETED)

80040800,%x00.08.04.80

IgnoreFailure An error occurred but it's safe to ignore the error, perhaps because the change in question has been superseded.(SYNC_E_IGNORE)

80040801%x01.08.04.80

SyncConflict Conflicting changes to an object have been detected.(SYNC_E_CONFLICT)

80040802%x02.08.04.80

NoParentFolder The parent folder could not be found.(SYNC_E_NO_PARENT)

80040803%x03.08.04.80

CycleDetected An operation would create a cycle (for instance, by copying a parent folder to one of its subfolders).

80040804%x04.08.04.80

NotSynchronized A sync operation did not take place, possibly due to a conflicting change.(SYNC_E_UNSYNCHRONIZED)

80040805%x05.08.04.80

NamedPropertyQuota The Store object cannot store any more named property mappings.(MAPI_E_NAMED_PROP_QUOTA_EXCEEDED, ecNPQuotaExceeded)

80040900,%x00.09.04.80

2.4.1 Additional Error CodesWhen encoded in ROP buffers, all error codes are transmitted as 32-bit integers in little-endian format. Additional error codes are presented in the following table.

Name Description (alternate names)

Numeric value (hex)

IsamError Unspecified database failure.(ecJetError)

0x000003EA

UnknownUser Unable to identify a home Store object for this user.(ecUnknownUser)

0x000003EB

Exiting The server is in the process of stopping.(ecExiting)

0x000003ED

BadConfiguration Protocol settings for this user are incorrect.(ecBadConfig)

0x000003EE

UnknownCodePage The specified code page is not installed on the server.

0x000003EF

27 / 122





Numeric value (hex)

(ecUnknownCodePage)

ServerMemory The server is out of memory.(ecServerOOM, ecMemory)

0x000003F0

LoginPermission This user does not have access rights to the mailbox.(ecLoginPerm)

0x000003F2

DatabaseRolledBack The database has been restored and needs fixup, but cannot be fixed up.(ecDatabaseRolledBack)

0x000003F3

DatabaseCopiedError The database file has been copied from another server.(ecDatabaseCopiedError)

0x000003F4

AuditNotAllowed Auditing of security operations is not permitted.(ecAuditNotAllowed)

0x000003F5

ZombieUser User has no security identifier.(ecZombieUser)

0x000003F6

UnconvertableACL An access control list cannot be converted to NTFS format.(ecUnconvertableACL)

0x000003F7

NoFreeJetSessions No Jet session is available.(ecNoFreeJses)

0x0000044C

DifferentJetSession Warning, a Jet session other than the one requested was returned.(ecDifferentJses)

0x0000044D

FileRemove An error occurred when attempting to remove a database file.(ecFileRemove)

0x0000044F

ParameterOverflow Parameter value overflow.(ecParameterOverflow)

0x00000450

BadVersion Bad message store database version number.(ecBadVersion)

0x00000451

TooManyColumns Too many columns requested in SetColumns.(ecTooManyCols)

0x00000452

HaveMore A ROP has more data to return.(ecHaveMore)

0x00000453

DatabaseError General database problem 0x000004

28 / 122





Numeric value (hex)

(ecDatabaseError) 54

IndexNameTooBig An index name is larger than what Jet allows(ecIndexNameTooBig)

0x00000455

UnsupportedProperty The property data type is not supported.(ecUnsupportedProp)

0x00000456

MessageNotSaved During AbortSubmit, a message was not saved.(ecMsgNotSaved)

0x00000457

UnpublishedNotification A notification could not be published at this time.(ecUnpubNotif)

0x00000459

DifferentRoot Moving or copying folders to a different top-level hierarchy is not supported.(ecDifferentRoot)

0x0000045B

BadFolderName Invalid folder name.(ecBadFolderName)

0x0000045C

AttachmentOpen The attachment is open.(ecAttachOpen)

0x0000045D

InvalidCollapseState The collapse state given to SetCollapseState is invalid.(ecInvClpsState)

0x0000045E

SkipMyChildren While walking a folder tree, do not consider children of this folder.(ecSkipMyChildren)

0x0000045F

SearchFolder The operation is not supported on a search folder.(ecSearchFolder)

0x00000460

NotSearchFolder The operation is valid only on a search folder.(ecNotSearchFolder)

0x00000461

FolderSetReceive This is a Receive folder and cannot be deleted.(ecFolderSetReceive)

0x00000462

NoReceiveFolder No Receive folder is available (even no default).(ecNoReceiveFolder)

0x00000463

DeleteSubmittedMessage Deleting a message that has been submitted for sending is not permitted.

0x00000465

29 / 122





Numeric value (hex)

(ecNoDelSubmitMsg)

InvalidRecipients It was impossible to deliver to this recipient.(ecInvalidRecips)

0x00000467

NoReplicaHere No replica of the public folder in this Store object.(ecNoReplicaHere)

0x00000468

NoReplicaAvailable No available Store object has a replica of this public folder.(ecNoReplicaAvailable)

0x00000469

PublicDatabase The operation is invalid on a public Store object.(ecPublicMDB)

0x0000046A

NotPublicDatabase The operation is valid only on a public Store object.(ecNotPublicMDB)

0x0000046B

RecordNotFound The record was not found.(ecRecordNotFound)

0x0000046C

ReplicationConflict A replication conflict was detected.(ecReplConflict)

0x0000046D

FXBufferOverrun Prevented an overrun while reading a fast transfer buffer.(ecFxBufferOverrun)

0x00000470

FXBufferEmpty No more in a fast transfer buffer.(ecFxBufferEmpty)

0x00000471

FXPartialValue Partial long value in a fast transfer buffer.(ecFxPartialValue)

0x00000472

FxNoRoom No room for an atomic value in a fast transfer buffer.(ecFxNoRoom)

0x00000473

TimeExpired Housekeeping functions have exceeded their time window.(ecMaxTimeExpired)

0x00000474

DestinationError An error occurred on the destination folder during a copy operation.(ecDstError)

0x00000475

DatabaseNotInitialized The Store object was not properly initialized.(ecMDBNotInit)

0x00000476

30 / 122





Numeric value (hex)

WrongServer This server does not host the user's mailbox database.(ecWrongServer)

0x00000478

BufferTooSmall A buffer passed to this function is not big enough.(ecBufferTooSmall)

0x0000047D

AttachmentResolutionRequired Linked attachments could not be resolved to actual files.(ecRequiresRefResolve)

0x0000047E

ServerPaused The service is in a paused state.(ecServerPaused)

0x0000047F

ServerBusy The server is too busy to complete an operation.(ecServerBusy)

0x00000480

NoSuchLogon No such logon exists in the Store object's Logon list.(ecNoSuchLogon)

0x00000481

LoadLibraryFailed Internal error: the service cannot load a required DLL.(ecLoadLibFailed)

0x00000482

AlreadyConfigured A synchronization object has already been configured.(ecObjAlreadyConfig)

0x00000483

NotConfigured A synchronization object has not yet been configured.(ecObjNotConfig)

0x00000484

DataLoss A code page conversion incurred when data loss.(ecDataLoss)

0x00000485

MaximumSendThreadExceeded The maximum number of send threads has been exceeded.(ecMaxSendThreadExceeded)

0x00000488

FxErrorMarker A fast transfer error marker was found, and recovery is necessary.(ecFxErrorMarker)

0x00000489

NoFreeJtabs There are no more free Jet tables.(ecNoFreeJtabs)

0x0000048A

NotPrivateDatabase The operation is only valid on a private mailbox database.

0x0000048B

31 / 122





Numeric value (hex)

(ecNotPrivateMDB)

IsintegMDB The Store object has been locked by the ISINTEG utility.(ecIsintegMDB)

0x0000048C

RecoveryMismatch A recovery storage group operation was attempted on a non-RSG Store object, or vice-versa.(ecRecoveryMDBMismatch)

0x0000048D

TableMayNotBeDeleted Attempt to delete a critical table, such as the messages or attachments table.(ecTableMayNotBeDeleted)

0x0000048E

RpcRegisterIf Error in registering RPC interfaces.(ecRpcRegisterIf)

0x000004B1

RpcListen Error in starting the RPC listener.(ecRpcListen)

0x000004B2

RpcFormat A badly formatted RPC buffer was detected.(ecRpcFormat)

0x000004B6

NoCopyTo Single instance storage cannot be used in this case.(ecNoCopyTo)

0x000004B7

NullObject An object handle reference in the RPC buffer could not be resolved.(ecNullObject)

0x000004B9

RpcAuthentication Server requests client to use authentication.(ecRpcAuthentication)

0x000004BC

RpcBadAuthenticationLevel The server doesn't recognize a client's authentication level.(ecRpcBadAuthenticationLevel)

0x000004BD

NullCommentRestriction The sub-restriction of a comment restriction is empty.(ecNullCommentRestriction)

0x000004BE

RulesLoadError Rule data was unavailable for this folder.(ecRulesLoadError)

0x000004CC

RulesDeliverErr Delivery-time failure in rule execution.(ecRulesDeliverErr)

0x000004CD

RulesParsingErr Invalid syntax in a stored rule condition or action.

0x000004CE

32 / 122





Numeric value (hex)

(ecRulesParsingErr)

RulesCreateDAE Failure creating a deferred rule action error message.(ecRulesCreateDaeErr)

0x000004CF

RulesCreateDAM Failure creating a deferred rule action message.(ecRulesCreateDamErr)

0x000004D0

RulesNoMoveCopyFolder A move or copy rule action could not be performed due to a problem with the target folder.(ecRulesNoMoveCopyFolder)

0x000004D1

RulesNoFolderRights A move or copy rule action could not be performed due to a permissions problem with the target folder.(ecRulesNoFolderRights)

0x000004D2

MessageTooBig A message could not be delivered because it exceeds a size limit.(ecMessageTooBig)

0x000004D4

FormNotValid There is a problem with the form mapped to the message's message class.(ecFormNotValid)

0x000004D5

NotAuthorized Delivery to the desired folder was not authorized.(ecNotAuthorized)

0x000004D6

DeleteMessage The message was deleted by a rule action.(ecDeleteMessage)

0x000004D7

BounceMessage Delivery of the message was denied by a rule action.(ecBounceMessage)

0x000004D8

QuotaExceeded The operation failed because it would have exceeded a resource quota.(ecQuotaExceeded)

0x000004D9

MaxSubmissionExceeded A message could not be submitted because its size exceeds the defined maximum.(ecMaxSubmissionExceeded)

0x000004DA

MaxAttachmentExceeded The maximum number of message attachments has been exceeded.(ecMaxAttachmentExceeded)

0x000004DB

SendAsDenied The user account does not have permission to 0x000004

33 / 122





Numeric value (hex)

send mail as the owner of this mailbox.(ecSendAsDenied)

DC

ShutoffQuotaExceeded The operation failed because it would have exceeded the mailbox's shutoff quota.(ecShutoffQuotaExceeded)

0x000004DD

TooManyOpenObjects A client has opened too many objects of a specific type.(ecMaxObjsExceeded)

0x000004DE

ClientVersionBlocked The server is configured to block clients of this version.(ecClientVerDisallowed )

0x000004DF

RpcHttpDisallowed The server is configured to block RPC connections via HTTP.(ecRpcHttpDisallowed)

0x000004E0

CachedModeRequired The server is configured to block online mode connections; only cached mode connections are allowed.(ecCachedModeRequired)

0x000004E1

FolderNotCleanedUp The folder has been deleted but not yet cleaned up.(ecFolderNotCleanedUp)

0x000004E3

FormatError Part of a ROP buffer was incorrectly formatted.(ecFmtError)

0x000004ED

NotExpanded Error in expanding or collapsing rows in a categorized view.(ecNotExpanded)

0x000004F7

NotCollapsed Error in expanding or collapsing rows in a categorized view. (ecNotCollapsed)

0x000004F8

NoExpandLeafRow Leaf rows cannot be expanded; only category header rows can be expanded.(ecLeaf)

0x000004F9

UnregisteredNameProp An operation was attempted on a named property ID for which no name has been registered.(ecUnregisteredNameProp)

0x000004FA

FolderDisabled Access to the folder is disabled, perhaps because form design is in progress.(ecFolderDisabled)

0x000004FB

DomainError There is an inconsistency in the Store object's 0x000004

34 / 122





Numeric value (hex)

association with its server.(ecDomainError)

FC

NoCreateRight The operation requires create access rights which the user does not have.(ecNoCreateRight)

0x000004FF

PublicRoot The operation requires create access rights at a public folder root.(ecPublicRoot)

0x00000500

NoReadRight The operation requires read access rights which the user does not have.(ecNoReadRight)

0x00000501

NoCreateSubfolderRight The operation requires create subfolder access rights which the user does not have. (ecNoCreateSubfolderRight)

0x00000502

MessageCycle The source message contains the destination message and cannot be attached to it.(ecMsgCycle)

0x00000504

NullDestinationObject The RPC buffer contains a destination object handle that could not be resolved to a server object.(ecDstNullObject)

0x00000503

TooManyRecips A hard limit on the number of recipients per message was exceeded.(ecTooManyRecips)

0x00000505

VirusScanInProgress The operation failed because the target message is being scanned for viruses.(ecVirusScanInProgress)

0x0000050A

VirusDetected The operation failed because the target message is infected with a virus.(ecVirusDetected)

0x0000050B

MailboxInTransit The mailbox is in transit and is not accepting mail.(ecMailboxInTransit)

0x0000050C

BackupInProgress The operation failed because the Store object is being backed up.(ecBackupInProgress)

0x0000050D

VirusMessageDeleted The operation failed because the target message was infected with a virus and has been deleted.(ecVirusMessageDeleted)

0x0000050E

35 / 122





Numeric value (hex)

InvalidBackupSequence Backup steps were performed out of sequence.(ecInvalidBackupSequence)

0x0000050F

InvalidBackupType The requested backup type was not recognized.(ecInvalidBackupType)

0x00000510

TooManyBackups Too many backups are already in progress.(ecTooManyBackupsInProgress)

0x00000511

RestoreInProgress A restore is already in progress.(ecRestoreInProgress)

0x00000512

DuplicateObject The object already exists.(ecDuplicateObject)

0x00000579

ObjectNotFound An internal database object could not be found.(ecObjectNotFound)

0x0000057A

FixupReplyRule The template message ID in a reply rule object is missing or incorrect.(ecFixupReplyRule)

0x0000057B

TemplateNotFound The reply template could not be found for a message that triggered an auto-reply rule.(ecTemplateNotFound)

0x0000057C

RuleExecution An error occurred while executing a rule action.(ecRuleExecution)

0x0000057D

DSNoSuchObject A server object could not be found in the directory.(ecDSNoSuchObject)

0x0000057E

AlreadyTombstoned An attempt to tombstone a message already in the message tombstone list failed.(ecMessageAlreadyTombstoned)

0x0000057F

ReadOnlyTransaction A write operation was attempted in a read-only transaction.(ecRequiresRWTransaction)

0x00000596

Paused Attempt to pause a server that is already paused.(ecPaused)

0x0000060E

NotPaused Attempt to unpause a server that is not paused.

0x0000060F

36 / 122





Numeric value (hex)

(ecNotPaused)

WrongMailbox The operation was attempted on the wrong mailbox.(ecWrongMailbox)

0x00000648

ChangePassword The account password needs to be changed.(ecChgPassword)

0x0000064C

PasswordExpired The account password has expired.(ecPwdExpired)

0x0000064D

InvalidWorkstation The account has logged on from the wrong workstation.(ecInvWkstn)

0x0000064E

InvalidLogonHours The account has logged on at the wrong time of day.(ecInvLogonHrs)

0x0000064F

AccountDisabled The account is disabled.(ecAcctDisabled)

0x00000650

RuleVersion The rule data contains an invalid rule version.(ecRuleVersion)

0x000006A4

RuleFormat The rule condition or action was incorrectly formatted.(ecRuleFormat)

0x000006A5

RuleSendAsDenied The rule is not authorized to send from this mailbox.(ecRuleSendAsDenied)

0x000006A6

NoServerSupport A newer client requires functionality that an older server does not support.(ecNoServerSupport)

0x000006B9

LockTimedOut An attempt to unlock a message failed because the lock had already timed out.(ecLockTimedOut)

0x000006BA

ObjectLocked The operation failed because the target object is locked.(ecObjectLocked)

0x000006BB

InvalidLockNamespace Attempt to lock a nonexistent object.(ecInvalidLockNamespace)

0x000006BD

MessageDeleted Operation failed because the message has been deleted.

0x000007D6

37 / 122





Numeric value (hex)

(ecMessageDeleted)

ProtocolDisabled The requested protocol is disabled in the server configuration.(ecProtocolDisabled)

0x000007D8

CleartextLogonDisabled Clear text logons were disabled. (ecCleartextLogonDisabled)

0x000007D9

Rejected The operation was rejected, perhaps because it is not supported.(ecRejected)

0x000007EE

AmbiguousAlias User account information did not uniquely identify a user.(ecAmbiguousAlias)

0x0000089A

UnknownMailbox No mailbox object for this logon exists in the address book.(ecUnknownMailbox)

0x0000089B

ExpressionReserved Internal error in evaluating an expression.(ecExpReserved)

0x000008FC

ExpressionParseDepth The expression tree exceeds a defined depth limit.(ecExpParseDepth)

0x000008FD

ExpressionArgumentType An argument to a function has the wrong type.(ecExpFuncArgType)

0x000008FE

ExpressionSyntax Syntax error in expression.(ecExpSyntax)

0x000008FF

ExpressionBadStringToken Invalid string token in expression.(ecExpBadStrToken)

0x00000900

ExpressionBadColToken Invalid column name in expression.(ecExpBadColToken)

0x00000901

ExpressionTypeMismatch Property types in, for example, a comparison expression, are incompatible.(ecExpTypeMismatch)

0x00000902

ExpressionOperatorNotSupported The requested operator is not supported.(ecExpOpNotSupported)

0x00000903

ExpressionDivideByZero Divide by zero doesn't work.(ecExpDivByZero)

0x00000904

ExpressionUnaryArgument The argument to a unary expression is of 0x000009

38 / 122





Numeric value (hex)

incorrect type.(ecExpUnaryArgType)

05

NotLocked An attempt to lock a resource failed.(ecNotLocked)

0x00000960

ClientEvent A client-supplied event has fired.(ecClientEvent)

0x00000961

CorruptEvent Data in the event table is bad.(ecCorruptEvent)

0x00000965

CorruptWatermark A watermark in the event table is bad.(ecCorruptWatermark)

0x00000966

EventError General event processing error.(ecEventError)

0x00000967

WatermarkError An event watermark is out of range or otherwise invalid.(ecWatermarkError)

0x00000968

NonCanonicalACL A modification to an access control list failed because the existing ACL is not in canonical format.(ecNonCanonicalACL)

0x00000969

MailboxDisabled Logon was unsuccessful because the mailbox is disabled.(ecMailboxDisabled)

0x0000096C

RulesFolderOverQuota A move or copy rule action failed because the destination folder is over quota.(ecRulesFolderOverQuota )

0x0000096D

AddressBookUnavailable The address book server could not be reached.(ecADUnavailable)

0x0000096E

AddressBookError Unspecified error from the address book server.(ecADError)

0x0000096F

AddressBookObjectNotFound An object was not found in the address book.(ecADNotFound)

0x00000971

AddressBookPropertyError A property was not found in the address book.(ecADPropertyError)

0x00000972

NotEncrypted The server is configured to force encrypted connections, but the client requested an

0x00000970

39 / 122





Numeric value (hex)

unencrypted connection.(ecNotEncrypted)

RpcServerTooBusy An external RPC call failed because the server was too busy.(ecRpcServerTooBusy)

0x00000973

RpcOutOfMemory An external RPC call failed because the local server was out of memory. (ecRpcOutOfMemory)

0x00000974

RpcServerOutOfMemory An external RPC call failed because the remote server was out of memory. (ecRpcServerOutOfMemory)

0x00000975

RpcOutOfResources An external RPC call failed because the remote server was out of an unspecified resource.(ecRpcOutOfResources)

0x00000976

RpcServerUnavailable An external RPC call failed because the remote server was unavailable.(ecRpcServerUnavailable)

0x00000977

SecureSubmitError A failure occurred while setting the secure submission state of a message.(ecSecureSubmitError)

0x0000097A

EventsDeleted Requested events were already deleted from the queue.(ecEventsDeleted)

0x0000097C

SubsystemStopping A component service is in the process of shutting down.(ecSubsystemStopping)

0x0000097D

AttendantUnavailable The system attendant service is unavailable.(ecSAUnavailable)

0x0000097E

CIStopping The content indexer service is stopping.(ecCIStopping)

0x00000A28

FxInvalidState An internal fast transfer object has invalid state.(ecFxInvalidState)

0x00000A29

FxUnexpectedMarker Fast Transfer parsing has hit an invalid marker.(ecFxUnexpectedMarker)

0x00000A2A

DuplicateDelivery A copy of this message has already been delivered.

0x00000A2B

40 / 122





Numeric value (hex)

(ecDuplicateDelivery)

ConditionViolation The condition was not met for a conditional operation.(ecConditionViolation)

0x00000A2C

IsamErrorRfsFailure The Resource Failure Simulator failed. (JET_errRfsFailure)

0xFFFFFF9C

IsamErrorRfsNotArmed The Resource Failure Simulator has not been initialized. (JET_errRfsNotArmed)

0xFFFFFF9B

IsamErrorFileClose The file could not be closed. (JET_errFileClose) 0xFFFFFF9A

IsamErrorOutOfThreads The thread could not be started. (JET_errOutOfThreads)

0xFFFFFF99

IsamErrorTooManyIO The system is busy due to too many IOs. (JET_errTooManyIO)

0xFFFFFF97

IsamErrorTaskDropped The requested asynchronous task could not be executed. (JET_errTaskDropped)

0xFFFFFF96

IsamErrorInternalError There was a fatal internal error. (JET_errInternalError)

0xFFFFFF95

IsamErrorDatabaseBufferDependenciesCorrupted

The buffer dependencies were set improperly and there was a recovery failure. (JET_errDatabaseBufferDependenciesCorrupted)

0xFFFFFF01

IsamErrorPreviousVersion The version already existed and there was a recovery failure. (JET_errPreviousVersion)

0xFFFFFEBE

IsamErrorPageBoundary The page boundary has been reached. (JET_errPageBoundary)

0xFFFFFEBD

IsamErrorKeyBoundary The key boundary has been reached. (JET_errKeyBoundary)

0xFFFFFEBC

IsamErrorBadPageLink The database is corrupt. (JET_errBadPageLink) 0xFFFFFEB9

IsamErrorBadBookmark The bookmark has no corresponding address in the database. (JET_errBadBookmark)

0xFFFFFEB8

IsamErrorNTSystemCallFailed The call to the operating system failed. (JET_errNTSystemCallFailed)

0xFFFFFEB2

IsamErrorBadParentPageLink A parent database is corrupt. (JET_errBadParentPageLink)

0xFFFFFEAE

IsamErrorSPAvailExtCacheOutOfSync The AvailExt cache does not match the B+ tree. (JET_errSPAvailExtCacheOutOfSync)

0xFFFFFEAC

41 / 122





Numeric value (hex)

IsamErrorSPAvailExtCorrupted The AllAvailExt space tree is corrupt. (JET_errSPAvailExtCorrupted)

0xFFFFFEAB

IsamErrorSPAvailExtCacheOutOfMemory An out of memory error occurred while allocating an AvailExt cache node. (JET_errSPAvailExtCacheOutOfMemory)

0xFFFFFEAA

IsamErrorSPOwnExtCorrupted The OwnExt space tree is corrupt. (JET_errSPOwnExtCorrupted)

0xFFFFFEA9

IsamErrorDbTimeCorrupted The Dbtime on the current page is greater than the global database dbtime. (JET_errDbTimeCorrupted)

0xFFFFFEA8

IsamErrorKeyTruncated An attempt to create a key for an index entry failed because the key would have been truncated and the index definition disallows key truncation. (JET_errKeyTruncated)

0xFFFFFEA6

IsamErrorKeyTooBig The key is too large. (JET_errKeyTooBig) 0xFFFFFE68

IsamErrorInvalidLoggedOperation The logged operation cannot be redone. (JET_errInvalidLoggedOperation)

0xFFFFFE0C

IsamErrorLogFileCorrupt The log file is corrupt. (JET_errLogFileCorrupt) 0xFFFFFE0B

IsamErrorNoBackupDirectory A backup directory was not given. (JET_errNoBackupDirectory)

0xFFFFFE09

IsamErrorBackupDirectoryNotEmpty The backup directory is not empty. (JET_errBackupDirectoryNotEmpty)

0xFFFFFE08

IsamErrorBackupInProgress The backup is already active. (JET_errBackupInProgress)

0xFFFFFE07

IsamErrorRestoreInProgress A restore is in progress. (JET_errRestoreInProgress)

0xFFFFFE06

IsamErrorMissingPreviousLogFile The log file is missing for the check point. (JET_errMissingPreviousLogFile)

0xFFFFFE03

IsamErrorLogWriteFail There was a failure writing to the log file. (JET_errLogWriteFail)

0xFFFFFE02

IsamErrorLogDisabledDueToRecoveryFailure The attempt to write to the log after recovery failed. (JET_errLogDisabledDueToRecoveryFailure)

0xFFFFFE01

IsamErrorCannotLogDuringRecoveryRedo The attempt to write to the log during the recovery redo failed. (JET_errCannotLogDuringRecoveryRedo)

0xFFFFFE00

IsamErrorLogGenerationMismatch The name of the log file does not match the internal generation number.

0xFFFFFDFF

42 / 122





Numeric value (hex)

(JET_errLogGenerationMismatch)

IsamErrorBadLogVersion The version of the log file is not compatible with the ESE version. (JET_errBadLogVersion)

0xFFFFFDFE

IsamErrorInvalidLogSequence The timestamp in the next log does not match the expected timestamp. (JET_errInvalidLogSequence)

0xFFFFFDFD

IsamErrorLoggingDisabled The log is not active. (JET_errLoggingDisabled) 0xFFFFFDFC

IsamErrorLogBufferTooSmall The log buffer is too small for recovery. (JET_errLogBufferTooSmall)

0xFFFFFDFB

IsamErrorLogSequenceEnd The maximum log file number has been exceeded. (JET_errLogSequenceEnd)

0xFFFFFDF9

IsamErrorNoBackup There is no backup in progress. (JET_errNoBackup)

0xFFFFFDF8

IsamErrorInvalidBackupSequence The backup call is out of sequence. (JET_errInvalidBackupSequence)

0xFFFFFDF7

IsamErrorBackupNotAllowedYet A backup cannot be done at this time. (JET_errBackupNotAllowedYet)

0xFFFFFDF5

IsamErrorDeleteBackupFileFail A backup file could not be deleted. (JET_errDeleteBackupFileFail)

0xFFFFFDF4

IsamErrorMakeBackupDirectoryFail The backup temporary directory could not be created. (JET_errMakeBackupDirectoryFail)

0xFFFFFDF3

IsamErrorInvalidBackup Circular logging is enabled; an incremental backup cannot be performed. (JET_errInvalidBackup)

0xFFFFFDF2

IsamErrorRecoveredWithErrors The data was restored with errors. (JET_errRecoveredWithErrors)

0xFFFFFDF1

IsamErrorMissingLogFile The current log file is missing. (JET_errMissingLogFile)

0xFFFFFDF0

IsamErrorLogDiskFull The log disk is full. (JET_errLogDiskFull) 0xFFFFFDEF

IsamErrorBadLogSignature There is a bad signature for a log file. (JET_errBadLogSignature)

0xFFFFFDEE

IsamErrorBadDbSignature There is a bad signature for a database file. (JET_errBadDbSignature)

0xFFFFFDED

IsamErrorBadCheckpointSignature There is a bad signature for a checkpoint file. (JET_errBadCheckpointSignature)

0xFFFFFDEC

IsamErrorCheckpointCorrupt The checkpoint file was not found or was 0xFFFFFD

43 / 122





Numeric value (hex)

corrupt. (JET_errCheckpointCorrupt) EB

IsamErrorMissingPatchPage The database patch file page was not found during recovery. (JET_errMissingPatchPage)

0xFFFFFDEA

IsamErrorBadPatchPage The database patch file page is not valid. (JET_errBadPatchPage)

0xFFFFFDE9

IsamErrorRedoAbruptEnded The redo abruptly ended due to a sudden failure while reading logs from the log file. (JET_errRedoAbruptEnded)

0xFFFFFDE8

IsamErrorBadSLVSignature The signature in the SLV file does not agree with the database. (JET_errBadSLVSignature)

0xFFFFFDE7

IsamErrorPatchFileMissing The hard restore detected that a database patch file is missing from the backup set. (JET_errPatchFileMissing)

0xFFFFFDE6

IsamErrorDatabaseLogSetMismatch The database does not belong with the current set of log files. (JET_errDatabaseLogSetMismatch)

0xFFFFFDE5

IsamErrorDatabaseStreamingFileMismatch This flag is reserved. (JET_errDatabaseStreamingFileMismatch)

0xFFFFFDE4

IsamErrorLogFileSizeMismatch The actual log file size does not match the configured size. (JET_errLogFileSizeMismatch)

0xFFFFFDE3

IsamErrorCheckpointFileNotFound The checkpoint file could not be located. (JET_errCheckpointFileNotFound)

0xFFFFFDE2

IsamErrorRequiredLogFilesMissing The required log files for recovery are missing. (JET_errRequiredLogFilesMissing)

0xFFFFFDE1

IsamErrorSoftRecoveryOnBackupDatabase A soft recovery is about to be used on a backup database when a restore should be used instead. (JET_errSoftRecoveryOnBackupDatabase)

0xFFFFFDE0

IsamErrorLogFileSizeMismatchDatabasesConsistent

The databases have been recovered, but the log file size used during recovery does not match JET_paramLogFileSize. (JET_errLogFileSizeMismatchDatabasesConsistent)

0xFFFFFDDF

IsamErrorLogSectorSizeMismatch The log file sector size does not match the sector size of the current volume. (JET_errLogSectorSizeMismatch)

0xFFFFFDDE

IsamErrorLogSectorSizeMismatchDatabasesConsistent

The databases have been recovered, but the log file sector size (used during recovery) does not match the sector size of the current volume. (JET_errLogSectorSizeMismatchDatabasesConsistent)

0xFFFFFDDD

44 / 122





Numeric value (hex)

IsamErrorLogSequenceEndDatabasesConsistent

The databases have been recovered, but all possible log generations in the current sequence have been used. All log files and the checkpoint file must be deleted and databases must be backed up before continuing. (JET_errLogSequenceEndDatabasesConsistent)

0xFFFFFDDC

IsamErrorStreamingDataNotLogged There was an illegal attempt to replay a streaming file operation where the data was not logged. This is probably caused by an attempt to rollforward with circular logging enabled. (JET_errStreamingDataNotLogged)

0xFFFFFDDB

IsamErrorDatabaseDirtyShutdown The database was not shutdown cleanly. A recovery must first be run to properly complete database operations for the previous shutdown. (JET_errDatabaseDirtyShutdown)

0xFFFFFDDA

IsamErrorConsistentTimeMismatch The last consistent time for the database has not been matched. (JET_errConsistentTimeMismatch)

0xFFFFFDD9

IsamErrorDatabasePatchFileMismatch The database patch file is not generated from this backup. (JET_errDatabasePatchFileMismatch)

0xFFFFFDD8

IsamErrorEndingRestoreLogTooLow The starting log number is too low for the restore. (JET_errEndingRestoreLogTooLow)

0xFFFFFDD7

IsamErrorStartingRestoreLogTooHigh The starting log number is too high for the restore. (JET_errStartingRestoreLogTooHigh)

0xFFFFFDD6

IsamErrorGivenLogFileHasBadSignature The restore log file has a bad signature. (JET_errGivenLogFileHasBadSignature)

0xFFFFFDD5

IsamErrorGivenLogFileIsNotContiguous The restore log file is not contiguous. (JET_errGivenLogFileIsNotContiguous)

0xFFFFFDD4

IsamErrorMissingRestoreLogFiles Some restore log files are missing. (JET_errMissingRestoreLogFiles)

0xFFFFFDD3

IsamErrorMissingFullBackup The database missed a previous full backup before attempting to perform an incremental backup. (JET_errMissingFullBackup)

0xFFFFFDD0

IsamErrorBadBackupDatabaseSize The backup database size is not a multiple of the database page size. (JET_errBadBackupDatabaseSize)

0xFFFFFDCF

IsamErrorDatabaseAlreadyUpgraded The current attempt to upgrade a database has been stopped because the database is already current. (JET_errDatabaseAlreadyUpgraded)

0xFFFFFDCE

IsamErrorDatabaseIncompleteUpgrade The database was only partially converted to 0xFFFFFD

45 / 122





Numeric value (hex)

the current format. The database must be restored from backup. (JET_errDatabaseIncompleteUpgrade)

CD

IsamErrorMissingCurrentLogFiles Some current log files are missing for continuous restore. (JET_errMissingCurrentLogFiles)

0xFFFFFDCB

IsamErrorDbTimeTooOld The dbtime on a page is smaller than the dbtimeBefore that is in the record. (JET_errDbTimeTooOld)

0xFFFFFDCA

IsamErrorDbTimeTooNew The dbtime on a page is in advance of the dbtimeBefore that is in the record. (JET_errDbTimeTooNew)

0xFFFFFDC9

IsamErrorMissingFileToBackup Some log or database patch files were missing during the backup. (JET_errMissingFileToBackup)

0xFFFFFDC7

IsamErrorLogTornWriteDuringHardRestore A torn write was detected in a backup that was set during a hard restore. (JET_errLogTornWriteDuringHardRestore)

0xFFFFFDC6

IsamErrorLogTornWriteDuringHardRecovery A torn write was detected during a hard recovery (the log was not part of a backup set). (JET_errLogTornWriteDuringHardRecovery)

0xFFFFFDC5

IsamErrorLogCorruptDuringHardRestore Corruption was detected in a backup set during a hard restore. (JET_errLogCorruptDuringHardRestore)

0xFFFFFDC3

IsamErrorLogCorruptDuringHardRecovery Corruption was detected during hard recovery (the log was not part of a backup set). (JET_errLogCorruptDuringHardRecovery)

0xFFFFFDC2

IsamErrorMustDisableLoggingForDbUpgrade Logging cannot be enabled while attempting to upgrade a database. (JET_errMustDisableLoggingForDbUpgrade)

0xFFFFFDC1

IsamErrorBadRestoreTargetInstance Either the TargetInstance that was specified for restore has not been found or the log files do not match. (JET_errBadRestoreTargetInstance)

0xFFFFFDBF

IsamErrorRecoveredWithoutUndo The database engine successfully replayed all operations in the transaction log to perform a crash recovery but the caller elected to stop recovery without rolling back uncommitted updates. (JET_errRecoveredWithoutUndo)

0xFFFFFDBD

IsamErrorDatabasesNotFromSameSnapshot The databases to be restored are not from the same shadow copy backup. (JET_errDatabasesNotFromSameSnapshot)

0xFFFFFDBC

46 / 122





Numeric value (hex)

IsamErrorSoftRecoveryOnSnapshot There is a soft recovery on a database from a shadow copy backup set. (JET_errSoftRecoveryOnSnapshot)

0xFFFFFDBB

IsamErrorCommittedLogFilesMissing One or more logs that were committed to this database are missing. (JET_errCommittedLogFilesMissing)

0xFFFFFDBA

IsamErrorCommittedLogFilesCorrupt One or more logs were found to be corrupt during recovery. (JET_errCommittedLogFilesCorrupt)

0xFFFFFDB6

IsamErrorUnicodeTranslationBufferTooSmall The Unicode translation buffer is too small. (JET_errUnicodeTranslationBufferTooSmall)

0xFFFFFDA7

IsamErrorUnicodeTranslationFail The Unicode normalization failed. (JET_errUnicodeTranslationFail)

0xFFFFFDA6

IsamErrorUnicodeNormalizationNotSupported The operating system does not provide support for Unicode normalization and a normalization callback was not specified. (JET_errUnicodeNormalizationNotSupported)

0xFFFFFDA5

IsamErrorExistingLogFileHasBadSignature The existing log file has a bad signature. (JET_errExistingLogFileHasBadSignature)

0xFFFFFD9E

IsamErrorExistingLogFileIsNotContiguous An existing log file is not contiguous. (JET_errExistingLogFileIsNotContiguous)

0xFFFFFD9D

IsamErrorLogReadVerifyFailure A checksum error was found in the log file during backup. (JET_errLogReadVerifyFailure)

0xFFFFFD9C

IsamErrorSLVReadVerifyFailure A checksum error was found in the SLV file during backup. (JET_errSLVReadVerifyFailure)

0xFFFFFD9B

IsamErrorCheckpointDepthTooDeep There are too many outstanding generations between the checkpoint and the current generation. (JET_errCheckpointDepthTooDeep)

0xFFFFFD9A

IsamErrorRestoreOfNonBackupDatabase A hard recovery was attempted on a database that was not a backup database. (JET_errRestoreOfNonBackupDatabase)

0xFFFFFD99

IsamErrorInvalidGrbit There is an invalid grbit parameter. (JET_errInvalidGrbit)

0xFFFFFC7C

IsamErrorTermInProgress Termination is in progress. (JET_errTermInProgress)

0xFFFFFC18

IsamErrorFeatureNotAvailable This API element is not supported. (JET_errFeatureNotAvailable)

0xFFFFFC17

IsamErrorInvalidName An invalid name is being used. (JET_errInvalidName)

0xFFFFFC16

IsamErrorInvalidParameter An invalid API parameter is being used. 0xFFFFFC

47 / 122





Numeric value (hex)

(JET_errInvalidParameter) 15

IsamErrorDatabaseFileReadOnly There was an attempt to attach to a read-only database file for read/write operations. (JET_errDatabaseFileReadOnly)

0xFFFFFC10

IsamErrorInvalidDatabaseId There is an invalid database ID. (JET_errInvalidDatabaseId)

0xFFFFFC0E

IsamErrorOutOfMemory The system is out of memory. (JET_errOutOfMemory)

0xFFFFFC0D

IsamErrorOutOfDatabaseSpace The maximum database size has been reached. (JET_errOutOfDatabaseSpace)

0xFFFFFC0C

IsamErrorOutOfCursors The table is out of cursors. (JET_errOutOfCursors)

0xFFFFFC0B

IsamErrorOutOfBuffers The database is out of page buffers. (JET_errOutOfBuffers)

0xFFFFFC0A

IsamErrorTooManyIndexes There are too many indexes. (JET_errTooManyIndexes)

0xFFFFFC09

IsamErrorTooManyKeys There are too many columns in an index. (JET_errTooManyKeys)

0xFFFFFC08

IsamErrorRecordDeleted The record has been deleted. (JET_errRecordDeleted)

0xFFFFFC07

IsamErrorReadVerifyFailure There is a checksum error on a database page. (JET_errReadVerifyFailure)

0xFFFFFC06

IsamErrorPageNotInitialized There is a blank database page. (JET_errPageNotInitialized)

0xFFFFFC05

IsamErrorOutOfFileHandles There are no file handles. (JET_errOutOfFileHandles)

0xFFFFFC04

IsamErrorDiskIO There is a disk IO error. (JET_errDiskIO) 0xFFFFFC02

IsamErrorInvalidPath There is an invalid file path. (JET_errInvalidPath)

0xFFFFFC01

IsamErrorInvalidSystemPath There is an invalid system path. (JET_errInvalidSystemPath)

0xFFFFFC00

IsamErrorInvalidLogDirectory There is an invalid log directory. (JET_errInvalidLogDirectory)

0xFFFFFBFF

IsamErrorRecordTooBig The record is larger than maximum size. (JET_errRecordTooBig)

0xFFFFFBFE

IsamErrorTooManyOpenDatabases There are too many open databases. (JET_errTooManyOpenDatabases)

0xFFFFFBFD

48 / 122





Numeric value (hex)

IsamErrorInvalidDatabase This is not a database file. (JET_errInvalidDatabase)

0xFFFFFBFC

IsamErrorNotInitialized The database engine has not been initialized. (JET_errNotInitialized)

0xFFFFFBFB

IsamErrorAlreadyInitialized The database engine is already initialized. (JET_errAlreadyInitialized)

0xFFFFFBFA

IsamErrorInitInProgress The database engine is being initialized. (JET_errInitInProgress)

0xFFFFFBF9

IsamErrorFileAccessDenied The file cannot be accessed because the file is locked or in use. (JET_errFileAccessDenied)

0xFFFFFBF8

IsamErrorBufferTooSmall The buffer is too small. (JET_errBufferTooSmall)

0xFFFFFBF2

IsamErrorTooManyColumns Too many columns are defined. (JET_errTooManyColumns)

0xFFFFFBF0

IsamErrorContainerNotEmpty The container is not empty. (JET_errContainerNotEmpty)

0xFFFFFBED

IsamErrorInvalidFilename The filename is invalid. (JET_errInvalidFilename)

0xFFFFFBEC

IsamErrorInvalidBookmark There is an invalid bookmark. (JET_errInvalidBookmark)

0xFFFFFBEB

IsamErrorColumnInUse The column used is in an index. (JET_errColumnInUse)

0xFFFFFBEA

IsamErrorInvalidBufferSize The data buffer does not match the column size. (JET_errInvalidBufferSize)

0xFFFFFBE9

IsamErrorColumnNotUpdatable The column value cannot be set. (JET_errColumnNotUpdatable)

0xFFFFFBE8

IsamErrorIndexInUse The index is in use. (JET_errIndexInUse) 0xFFFFFBE5

IsamErrorLinkNotSupported The link support is unavailable. (JET_errLinkNotSupported)

0xFFFFFBE4

IsamErrorNullKeyDisallowed Null keys are not allowed on an index. (JET_errNullKeyDisallowed)

0xFFFFFBE3

IsamErrorNotInTransaction The operation must occur within a transaction. (JET_errNotInTransaction)

0xFFFFFBE2

IsamErrorTooManyActiveUsers There are too many active database users. (JET_errTooManyActiveUsers)

0xFFFFFBDD

IsamErrorInvalidCountry There is an invalid or unknown country code. (JET_errInvalidCountry)

0xFFFFFBDB

49 / 122





Numeric value (hex)

IsamErrorInvalidLanguageId There is an invalid or unknown language ID. (JET_errInvalidLanguageId)

0xFFFFFBDA

IsamErrorInvalidCodePage There is an invalid or unknown code page. (JET_errInvalidCodePage)

0xFFFFFBD9

IsamErrorInvalidLCMapStringFlags There are invalid flags being used for LCMapString. (JET_errInvalidLCMapStringFlags)

0xFFFFFBD8

IsamErrorVersionStoreEntryTooBig There was an attempt to create a version store entry (RCE) that was larger than a version bucket. (JET_errVersionStoreEntryTooBig)

0xFFFFFBD7

IsamErrorVersionStoreOutOfMemoryAndCleanupTimedOut

The version store is out of memory and the cleanup attempt failed to complete. (JET_errVersionStoreOutOfMemoryAndCleanupTimedOut)

0xFFFFFBD6

IsamErrorVersionStoreOutOfMemory The version store is out of memory and a cleanup was already attempted. (JET_errVersionStoreOutOfMemory)

0xFFFFFBD3

IsamErrorCannotIndex The escrow and SLV columns cannot be indexed. (JET_errCannotIndex)

0xFFFFFBD1

IsamErrorRecordNotDeleted The record has not been deleted. (JET_errRecordNotDeleted)

0xFFFFFBD0

IsamErrorTooManyMempoolEntries Too many mempool entries have been requested. (JET_errTooManyMempoolEntries)

0xFFFFFBCF

IsamErrorOutOfObjectIDs The database is out of B+ tree ObjectIDs so an offline defragmentation must be performed to reclaim freed or unused ObjectIDs. (JET_errOutOfObjectIDs)

0xFFFFFBCE

IsamErrorOutOfLongValueIDs The Long-value ID counter has reached the maximum value. An offline defragmentation must be performed to reclaim free or unused LongValueIDs. (JET_errOutOfLongValueIDs)

0xFFFFFBCD

IsamErrorOutOfAutoincrementValues The auto-increment counter has reached the maximum value. An offline defragmentation will not be able to reclaim free or unused auto-increment values). (JET_errOutOfAutoincrementValues)

0xFFFFFBCC

IsamErrorOutOfDbtimeValues The Dbtime counter has reached the maximum value. An offline defragmentation must be performed to reclaim free or unused Dbtime values. (JET_errOutOfDbtimeValues)

0xFFFFFBCB

IsamErrorOutOfSequentialIndexValues A sequential index counter has reached the maximum value. An offline defragmentation

0xFFFFFBCA

50 / 122





Numeric value (hex)

must be performed to reclaim Free or unused SequentialIndex values. (JET_errOutOfSequentialIndexValues)

IsamErrorRunningInOneInstanceMode This multi-instance call has the single-instance mode enabled. (JET_errRunningInOneInstanceMode)

0xFFFFFBC8

IsamErrorRunningInMultiInstanceMode This single-instance call has the multi-instance mode enabled. (JET_errRunningInMultiInstanceMode)

0xFFFFFBC7

IsamErrorSystemParamsAlreadySet The global system parameters have already been set. (JET_errSystemParamsAlreadySet)

0xFFFFFBC6

IsamErrorSystemPathInUse The system path is already being used by another database instance. (JET_errSystemPathInUse)

0xFFFFFBC5

IsamErrorLogFilePathInUse The log file path is already being used by another database instance. (JET_errLogFilePathInUse)

0xFFFFFBC4

IsamErrorTempPathInUse The path to the temporary database is already being used by another database instance. (JET_errTempPathInUse)

0xFFFFFBC3

IsamErrorInstanceNameInUse The instance name is already in use. (JET_errInstanceNameInUse)

0xFFFFFBC2

IsamErrorInstanceUnavailable This instance cannot be used because it encountered a fatal error. (JET_errInstanceUnavailable)

0xFFFFFBBE

IsamErrorDatabaseUnavailable This database cannot be used because it encountered a fatal error. (JET_errDatabaseUnavailable)

0xFFFFFBBD

IsamErrorInstanceUnavailableDueToFatalLogDiskFull

This instance cannot be used because it encountered a log-disk-full error while performing an operation (such as a transaction rollback) that could not tolerate failure. (JET_errInstanceUnavailableDueToFatalLogDiskFull)

0xFFFFFBBC

IsamErrorOutOfSessions The database is out of sessions. (JET_errOutOfSessions)

0xFFFFFBB3

IsamErrorWriteConflict The write lock failed due to the existence of an outstanding write lock. (JET_errWriteConflict)

0xFFFFFBB2

IsamErrorTransTooDeep The transactions are nested too deeply. (JET_errTransTooDeep)

0xFFFFFBB1

51 / 122





Numeric value (hex)

IsamErrorInvalidSesid There is an invalid session handle. (JET_errInvalidSesid)

0xFFFFFBB0

IsamErrorWriteConflictPrimaryIndex An update was attempted on an uncommitted primary index. (JET_errWriteConflictPrimaryIndex)

0xFFFFFBAF

IsamErrorInTransaction The operation is not allowed within a transaction. (JET_errInTransaction)

0xFFFFFBAC

IsamErrorRollbackRequired The current transaction must be rolled back. It cannot be committed and a new one cannot be started. (JET_errRollbackRequired)

0xFFFFFBAB

IsamErrorTransReadOnly A read-only transaction tried to modify the database. (JET_errTransReadOnly)

0xFFFFFBAA

IsamErrorSessionWriteConflict There was an attempt to replace the same record by two different cursors in the same session. (JET_errSessionWriteConflict)

0xFFFFFBA9

IsamErrorRecordTooBigForBackwardCompatibility

The record would be too big if represented in a database format from a previous version of Jet. (JET_errRecordTooBigForBackwardCompatibility)

0xFFFFFBA8

IsamErrorCannotMaterializeForwardOnlySort The temporary table could not be created due to parameters that conflict with JET_bitTTForwardOnly. (JET_errCannotMaterializeForwardOnlySort)

0xFFFFFBA7

IsamErrorSesidTableIdMismatch The session handle cannot be used with the table id because it was not used to create it. (JET_errSesidTableIdMismatch)

0xFFFFFBA6

IsamErrorInvalidInstance The instance handle is invalid or refers to an instance that has been shut down. (JET_errInvalidInstance)

0xFFFFFBA5

IsamErrorDatabaseDuplicate The database already exists. (JET_errDatabaseDuplicate)

0xFFFFFB4F

IsamErrorDatabaseInUse The database in use. (JET_errDatabaseInUse) 0xFFFFFB4E

IsamErrorDatabaseNotFound There is no such database. (JET_errDatabaseNotFound)

0xFFFFFB4D

IsamErrorDatabaseInvalidName The database name is invalid. (JET_errDatabaseInvalidName)

0xFFFFFB4C

IsamErrorDatabaseInvalidPages There are an invalid number of pages. (JET_errDatabaseInvalidPages)

0xFFFFFB4B

IsamErrorDatabaseCorrupted There is a non-database file or corrupt 0xFFFFFB

52 / 122





Numeric value (hex)

database. (JET_errDatabaseCorrupted) 4A

IsamErrorDatabaseLocked The database is exclusively locked. (JET_errDatabaseLocked)

0xFFFFFB49

IsamErrorCannotDisableVersioning The versioning for this database cannot be disabled. (JET_errCannotDisableVersioning)

0xFFFFFB48

IsamErrorInvalidDatabaseVersion The database engine is incompatible with the database. (JET_errInvalidDatabaseVersion)

0xFFFFFB47

IsamErrorDatabase200Format The database is in an older (200) format. (JET_errDatabase200Format)

0xFFFFFB46


0xFFFFFB45


0xFFFFFB44

IsamErrorPageSizeMismatch The database page size does not match the engine. (JET_errPageSizeMismatch)

0xFFFFFB43

IsamErrorTooManyInstances No more database instances can be started. (JET_errTooManyInstances)

0xFFFFFB42

IsamErrorDatabaseSharingViolation A different database instance is using this database. (JET_errDatabaseSharingViolation)

0xFFFFFB41

IsamErrorAttachedDatabaseMismatch An outstanding database attachment has been detected at the start or end of the recovery, but the database is missing or does not match attachment info. (JET_errAttachedDatabaseMismatch)

0xFFFFFB40

IsamErrorDatabaseInvalidPath The specified path to the database file is illegal. (JET_errDatabaseInvalidPath)

0xFFFFFB3F

IsamErrorDatabaseIdInUse A database is being assigned an ID that is already in use. (JET_errDatabaseIdInUse)

0xFFFFFB3E

IsamErrorForceDetachNotAllowed The force detach is allowed only after the normal detach was stopped due to an error. (JET_errForceDetachNotAllowed)

0xFFFFFB3D

IsamErrorCatalogCorrupted Corruption was detected in the catalog. (JET_errCatalogCorrupted)

0xFFFFFB3C

IsamErrorPartiallyAttachedDB The database is only partially attached and the attach operation cannot be completed. (JET_errPartiallyAttachedDB)

0xFFFFFB3B

IsamErrorDatabaseSignInUse The database with the same signature is already in use. (JET_errDatabaseSignInUse)

0xFFFFFB3A

IsamErrorDatabaseCorruptedNoRepair The database is corrupted but a repair is not 0xFFFFFB

53 / 122





Numeric value (hex)

allowed. (JET_errDatabaseCorruptedNoRepair) 38

IsamErrorInvalidCreateDbVersion The database engine attempted to replay a Create Database operation from the transaction log but failed due to an incompatible version of that operation. (JET_errInvalidCreateDbVersion)

0xFFFFFB37

IsamErrorTableLocked The table is exclusively locked. (JET_errTableLocked)

0xFFFFFAEA

IsamErrorTableDuplicate The table already exists. (JET_errTableDuplicate)

0xFFFFFAE9

IsamErrorTableInUse The table is in use and cannot be locked. (JET_errTableInUse)

0xFFFFFAE8

IsamErrorObjectNotFound There is no such table or object. (JET_errObjectNotFound)

0xFFFFFAE7

IsamErrorDensityInvalid There is a bad file or index density. (JET_errDensityInvalid)

0xFFFFFAE5

IsamErrorTableNotEmpty The table is not empty. (JET_errTableNotEmpty)

0xFFFFFAE4

IsamErrorInvalidTableId The table ID is invalid. (JET_errInvalidTableId) 0xFFFFFAE2

IsamErrorTooManyOpenTables No more tables can be opened, even after the internal cleanup task has run. (JET_errTooManyOpenTables)

0xFFFFFAE1

IsamErrorIllegalOperation The operation is not supported on the table. (JET_errIllegalOperation)

0xFFFFFAE0

IsamErrorTooManyOpenTablesAndCleanupTimedOut

No more tables can be opened because the cleanup attempt failed to complete. (JET_errTooManyOpenTablesAndCleanupTimedOut)

0xFFFFFADF

IsamErrorObjectDuplicate The table or object name is in use. (JET_errObjectDuplicate)

0xFFFFFADE

IsamErrorInvalidObject The object is invalid for operation. (JET_errInvalidObject)

0xFFFFFADC

IsamErrorCannotDeleteTempTable JetCloseTable must be used instead of JetDeleteTable to delete a temporary table. (JET_errCannotDeleteTempTable)

0xFFFFFADB

IsamErrorCannotDeleteSystemTable There was an illegal attempt to delete a system table. (JET_errCannotDeleteSystemTable)

0xFFFFFADA

IsamErrorCannotDeleteTemplateTable There was an illegal attempt to delete a 0xFFFFFA

54 / 122





Numeric value (hex)

template table. (JET_errCannotDeleteTemplateTable)

D9

IsamErrorExclusiveTableLockRequired There must be an exclusive lock on the table. (JET_errExclusiveTableLockRequired)

0xFFFFFAD6

IsamErrorFixedDDL DDL operations are prohibited on this table. (JET_errFixedDDL)

0xFFFFFAD5

IsamErrorFixedInheritedDDL On a derived table, DDL operations are prohibited on the inherited portion of the DDL. (JET_errFixedInheritedDDL)

0xFFFFFAD4

IsamErrorCannotNestDDL Nesting the hierarchical DDL is not currently supported. (JET_errCannotNestDDL)

0xFFFFFAD3

IsamErrorDDLNotInheritable There was an attempt to inherit a DDL from a table that is not marked as a template table. (JET_errDDLNotInheritable)

0xFFFFFAD2

IsamErrorInvalidSettings The system parameters were set improperly. (JET_errInvalidSettings)

0xFFFFFAD0

IsamErrorClientRequestToStopJetService The client has requested that the service be stopped. (JET_errClientRequestToStopJetService)

0xFFFFFACF

IsamErrorCannotAddFixedVarColumnToDerivedTable

The template table was created with the NoFixedVarColumnsInDerivedTables flag set. (JET_errCannotAddFixedVarColumnToDerivedTable)

0xFFFFFACE

IsamErrorIndexCantBuild The index build failed. (JET_errIndexCantBuild) 0xFFFFFA87

IsamErrorIndexHasPrimary The primary index is already defined. (JET_errIndexHasPrimary)

0xFFFFFA86

IsamErrorIndexDuplicate The index is already defined. (JET_errIndexDuplicate)

0xFFFFFA85

IsamErrorIndexNotFound There is no such index. (JET_errIndexNotFound)

0xFFFFFA84

IsamErrorIndexMustStay The clustered index cannot be deleted. (JET_errIndexMustStay)

0xFFFFFA83

IsamErrorIndexInvalidDef The index definition is invalid. (JET_errIndexInvalidDef)

0xFFFFFA82

IsamErrorInvalidCreateIndex The creation of the index description was invalid. (JET_errInvalidCreateIndex)

0xFFFFFA7F

IsamErrorTooManyOpenIndexes The database is out of index description blocks. (JET_errTooManyOpenIndexes)

0xFFFFFA7E

55 / 122





Numeric value (hex)

IsamErrorMultiValuedIndexViolation Non-unique inter-record index keys have been generated for a multi-valued index. (JET_errMultiValuedIndexViolation)

0xFFFFFA7D

IsamErrorIndexBuildCorrupted A secondary index that properly reflects the primary index failed to build. (JET_errIndexBuildCorrupted)

0xFFFFFA7C

IsamErrorPrimaryIndexCorrupted The primary index is corrupt and the database must be defragmented. (JET_errPrimaryIndexCorrupted)

0xFFFFFA7B

IsamErrorSecondaryIndexCorrupted The secondary index is corrupt and the database must be defragmented. (JET_errSecondaryIndexCorrupted)

0xFFFFFA7A

IsamErrorInvalidIndexId The index ID is invalid. (JET_errInvalidIndexId) 0xFFFFFA78

IsamErrorIndexTuplesSecondaryIndexOnly The tuple index can only be set on a secondary index. (JET_errIndexTuplesSecondaryIndexOnly)

0xFFFFFA6A

IsamErrorIndexTuplesTooManyColumns The index definition for the tuple index contains more key columns that the database engine can support. (JET_errIndexTuplesTooManyColumns)

0xFFFFFA69

IsamErrorIndexTuplesNonUniqueOnly The tuple index must be a non-unique index. (JET_errIndexTuplesNonUniqueOnly)

0xFFFFFA68

IsamErrorIndexTuplesTextBinaryColumnsOnly A tuple index definition can only contain key columns that have text or binary column types. (JET_errIndexTuplesTextBinaryColumnsOnly)

0xFFFFFA67

IsamErrorIndexTuplesVarSegMacNotAllowed The tuple index does not allow setting cbVarSegMac. (JET_errIndexTuplesVarSegMacNotAllowed)

0xFFFFFA66

IsamErrorIndexTuplesInvalidLimits The minimum/maximum tuple length or the maximum number of characters that are specified for an index are invalid. (JET_errIndexTuplesInvalidLimits)

0xFFFFFA65

IsamErrorIndexTuplesCannotRetrieveFromIndex

JetRetrieveColumn cannot be called with the JET_bitRetrieveFromIndex flag set while retrieving a column on a tuple index. (JET_errIndexTuplesCannotRetrieveFromIndex)

0xFFFFFA64

IsamErrorIndexTuplesKeyTooSmall The specified key does not meet the minimum tuple length. (JET_errIndexTuplesKeyTooSmall)

0xFFFFFA63

IsamErrorColumnLong The column value is long. (JET_errColumnLong)

0xFFFFFA23

56 / 122





Numeric value (hex)

IsamErrorColumnNoChunk There is no such chunk in a long value. (JET_errColumnNoChunk)

0xFFFFFA22

IsamErrorColumnDoesNotFit The field will not fit in the record. (JET_errColumnDoesNotFit)

0xFFFFFA21

IsamErrorNullInvalid Null is not valid. (JET_errNullInvalid, JET_errColumnIllegalNull)

0xFFFFFA20

IsamErrorColumnIndexed The column is indexed and cannot be deleted. (JET_errColumnIndexed)

0xFFFFFA1F

IsamErrorColumnTooBig The field length is greater than maximum allowed length. (JET_errColumnTooBig)

0xFFFFFA1E

IsamErrorColumnNotFound There is no such column. (JET_errColumnNotFound)

0xFFFFFA1D

IsamErrorColumnDuplicate This field is already defined. (JET_errColumnDuplicate)

0xFFFFFA1C

IsamErrorMultiValuedColumnMustBeTagged An attempt was made to create a multi-valued column, but the column was not tagged. (JET_errMultiValuedColumnMustBeTagged)

0xFFFFFA1B

IsamErrorColumnRedundant There was a second auto-increment or version column. (JET_errColumnRedundant)

0xFFFFFA1A

IsamErrorInvalidColumnType The column data type is invalid. (JET_errInvalidColumnType)

0xFFFFFA19

IsamErrorTaggedNotNULL There are no non-NULL tagged columns. (JET_errTaggedNotNULL)

0xFFFFFA16

IsamErrorNoCurrentIndex The database is invalid because it does not contain a current index. (JET_errNoCurrentIndex)

0xFFFFFA15

IsamErrorKeyIsMade The key is completely made. (JET_errKeyIsMade)

0xFFFFFA14

IsamErrorBadColumnId The column ID is incorrect. (JET_errBadColumnId)

0xFFFFFA13

IsamErrorBadItagSequence There is a bad itagSequence for the tagged column. (JET_errBadItagSequence)

0xFFFFFA12

IsamErrorColumnInRelationship A column cannot be deleted because it is part of a relationship. (JET_errColumnInRelationship)

0xFFFFFA11

IsamErrorCannotBeTagged The auto increment and version cannot be tagged. (JET_errCannotBeTagged)

0xFFFFFA0F

IsamErrorDefaultValueTooBig The default value exceeds the maximum size. (JET_errDefaultValueTooBig)

0xFFFFFA0C

57 / 122





Numeric value (hex)

IsamErrorMultiValuedDuplicate A duplicate value was detected on a unique multi-valued column. (JET_errMultiValuedDuplicate)

0xFFFFFA0B

IsamErrorLVCorrupted Corruption was encountered in a long-value tree. (JET_errLVCorrupted)

0xFFFFFA0A

IsamErrorMultiValuedDuplicateAfterTruncation A duplicate value was detected on a unique multi-valued column after the data was normalized, and it is normalizing truncated the data before comparison. (JET_errMultiValuedDuplicateAfterTruncation)

0xFFFFFA08

IsamErrorDerivedColumnCorruption There is an invalid column in derived table. (JET_errDerivedColumnCorruption)

0xFFFFFA07

IsamErrorInvalidPlaceholderColumn An attempt was made to convert a column to a primary index placeholder, but the column does not meet the necessary criteria. (JET_errInvalidPlaceholderColumn)

0xFFFFFA06

IsamErrorRecordNotFound The key was not found. (JET_errRecordNotFound)

0xFFFFF9BF

IsamErrorRecordNoCopy There is no working buffer. (JET_errRecordNoCopy)

0xFFFFF9BE

IsamErrorNoCurrentRecord There is no current record. (JET_errNoCurrentRecord)

0xFFFFF9BD

IsamErrorRecordPrimaryChanged The primary key might not change. (JET_errRecordPrimaryChanged)

0xFFFFF9BC

IsamErrorKeyDuplicate There is an illegal duplicate key. (JET_errKeyDuplicate)

0xFFFFF9BB

IsamErrorAlreadyPrepared An attempt was made to update a record while a record update was already in progress. (JET_errAlreadyPrepared)

0xFFFFF9B9

IsamErrorKeyNotMade A call was not made to JetMakeKey. (JET_errKeyNotMade)

0xFFFFF9B8

IsamErrorUpdateNotPrepared A call was not made to JetPrepareUpdate. (JET_errUpdateNotPrepared)

0xFFFFF9B7

IsamErrorDataHasChanged The data has changed and the operation was aborted. (JET_errDataHasChanged)

0xFFFFF9B5

IsamErrorLanguageNotSupported The operating system does not support the selected language. (JET_errLanguageNotSupported)

0xFFFFF9AD

IsamErrorTooManySorts There are too many sort processes. (JET_errTooManySorts)

0xFFFFF95B

58 / 122





Numeric value (hex)

IsamErrorInvalidOnSort An invalid operation occurred during a sort. (JET_errInvalidOnSort)

0xFFFFF95A

IsamErrorTempFileOpenError The temporary file could not be opened. (JET_errTempFileOpenError)

0xFFFFF8F5

IsamErrorTooManyAttachedDatabases Too many databases are open. (JET_errTooManyAttachedDatabases)

0xFFFFF8F3

IsamErrorDiskFull There is no space left on disk. (JET_errDiskFull) 0xFFFFF8F0

IsamErrorPermissionDenied Permission is denied. (JET_errPermissionDenied)

0xFFFFF8EF

IsamErrorFileNotFound The file was not found. (JET_errFileNotFound) 0xFFFFF8ED

IsamErrorFileInvalidType The file type is invalid. (JET_errFileInvalidType) 0xFFFFF8EC

IsamErrorAfterInitialization A restore cannot be started after initialization. (JET_errAfterInitialization)

0xFFFFF8C6

IsamErrorLogCorrupted The logs could not be interpreted. (JET_errLogCorrupted)

0xFFFFF8C4

IsamErrorInvalidOperation The operation is invalid. (JET_errInvalidOperation)

0xFFFFF88E

IsamErrorAccessDenied Access is denied. (JET_errAccessDenied) 0xFFFFF88D

IsamErrorTooManySplits An infinite split. (JET_errTooManySplits) 0xFFFFF88B

IsamErrorSessionSharingViolation Multiple threads are using the same session. (JET_errSessionSharingViolation)

0xFFFFF88A

IsamErrorEntryPointNotFound An entry point in a required DLL could not be found. (JET_errEntryPointNotFound)

0xFFFFF889

IsamErrorSessionContextAlreadySet The specified session already has a session context set. (JET_errSessionContextAlreadySet)

0xFFFFF888

IsamErrorSessionContextNotSetByThisThread An attempt was made to reset the session context, but the current thread was not the original one that set the session context. (JET_errSessionContextNotSetByThisThread)

0xFFFFF887

IsamErrorSessionInUse An attempt was made to terminate the session currently in use. (JET_errSessionInUse)

0xFFFFF886

IsamErrorRecordFormatConversionFailed An internal error occurred during a dynamic record format conversion.

0xFFFFF885

59 / 122





Numeric value (hex)

(JET_errRecordFormatConversionFailed)

IsamErrorOneDatabasePerSession Only one open user database per session is allowed. (JET_errOneDatabasePerSession)

0xFFFFF884

IsamErrorRollbackError There was an error during rollback. (JET_errRollbackError)

0xFFFFF883

IsamErrorCallbackFailed A callback function call failed. (JET_errCallbackFailed)

0xFFFFF7CB

IsamErrorCallbackNotResolved A callback function could not be found. (JET_errCallbackNotResolved)

0xFFFFF7CA

IsamErrorOSSnapshotInvalidSequence The operating system shadow copy API was used in an invalid sequence. (JET_errOSSnapshotInvalidSequence)

0xFFFFF69F

IsamErrorOSSnapshotTimeOut The operating system shadow copy ended with a time-out. (JET_errOSSnapshotTimeOut)

0xFFFFF69E

IsamErrorOSSnapshotNotAllowed The operating system shadow copy is not allowed because a backup or recovery in is progress. (JET_errOSSnapshotNotAllowed)

0xFFFFF69D

IsamErrorOSSnapshotInvalidSnapId The operation failed because the specified operating system shadow copy handle was invalid. (JET_errOSSnapshotInvalidSnapId)

0xFFFFF69C

IsamErrorLSCallbackNotSpecified An attempt was made to use local storage without a callback function being specified. (JET_errLSCallbackNotSpecified)

0xFFFFF448

IsamErrorLSAlreadySet An attempt was made to set the local storage for an object which already had it set. (JET_errLSAlreadySet)

0xFFFFF447

IsamErrorLSNotSet An attempt was made to retrieve local storage from an object which did not have it set. (JET_errLSNotSet)

0xFFFFF446

IsamErrorFileIOSparse An I/O operation failed because it was attempted against an unallocated region of a file. (JET_errFileIOSparse)

0xFFFFF060

IsamErrorFileIOBeyondEOF A read was issued to a location beyond the EOF (writes will expand the file). (JET_errFileIOBeyondEOF)

0xFFFFF05F

IsamErrorFileCompressed Read/write access is not supported on compressed files. (JET_errFileCompressed)

0xFFFFF05B

60 / 122




2.4.2 Property Error CodesProperty errors appear in two different contexts. When an error occurs in getting a property of an object, or a column of a table, from the server, then the type of the returned property value is ErrorCode (0x000A) and the property value itself is the error code. When an error occurs in setting a property of an object on the server, then the RopSetProperties returns an array of PropertyProblem structures that includes the error code.

Most property error codes are also used as general error codes, but they have a special meaning in the context of a property operation.

Property Error Codes are presented in the following table.


NotEnoughMemory

On get, indicates that the property or column value is too large to be retrieved by the request, and the property value needs to be accessed with RopOpenStream <9>.(E_NOMEMORY, MAPI_E_NOT_ENOUGH_MEMORY)

8007000E,%x0E.00.07.80

NotFound On get, indicates that the property or column has no value for this object.(MAPI_E_NOT_FOUND)

8004010F,%x0F.01.04.80

BadValue On set, indicates that the property value is not acceptable to the server.(MAPI_E_BAD_VALUE, ecPropBadValue)

80040301,%x01.03.04.80

InvalidType On get or set, indicates that the data type passed with the property or column is undefined.(MAPI_E_INVALID_TYPE, ecInvalidType)

80040302,%x02.03.04.80

UnsupportedType On get or set, indicates that the data type passed with the property or column is not acceptable to the server.(MAPI_E_TYPE_NO_SUPPORT, ecTypeNotSupported)

80040303,%x03.0.04.80

UnexpectedType On get or set, indicates that the data type passed with the property or column is not the type expected by the server.(MAPI_E_UNEXPECTED_TYPE, ecPropType)

80040304,%x04.03.04.80

TooBig Indicates that the result set of the operation is too big for the server to return.(MAPI_E_TOO_BIG, ecTooBig)

80040305,%x05.03.04.80

DeclineCopy On a copy operation, indicates that the server cannot copy the object – possibly because the source and destination are on different types of servers – and wishes to delegate the copying to client code.(MAPI_E_DECLINE_COPY)

80040306,%x06.03.04.80

UnexpectedId On get or set, indicates that the server does not support property IDs in this range, usually the named property ID range (0x8000-0xFFFF).(MAPI_E_UNEXPECTED_ID)

80040307,%x07.03.04.80

61 / 122




2.4.3 Warning CodesWarning codes indicate that while the operation as a whole was processed successfully by the server, individual items or properties were not processed successfully. For example, if three properties are requested from a Message object in a RopGetPropertiesSpecific operation and one of the three properties does not exist on the Message object, then in the return buffer:

1. The ROP returns an ErrorsReturned warning.

2. The type in the property tag of the missing property is errorcode.

3. The property value of the missing property is notfound.

Warning codes are presented in the following table.


ErrorsReturned A request involving multiple properties failed for one or more individual properties, while succeeding overall.(MAPI_W_ERRORS_RETURNED, ecWarnWithErrors)

00040380,%x80.03.04.00

PositionChanged A table operation succeeded, but the bookmark specified is no longer set at the same row as when it was last used.(MAPI_W_POSITION_CHANGED, ecWarnPositionChanged)

00040481,%x81.04.04.00

ApproximateCount The row count returned by a table operation is approximate, not exact.(MAPI_W_APPROX_COUNT, ecWarnApproxCount)

00040482,%x82.04.04.00

PartiallyComplete A move, copy, or delete operation succeeded for some messages but not for others.(MAPI_W_PARTIAL_COMPLETION, ecPartialCompletion)

00040680,%x80.06.04.00

SyncProgress The operation succeeded but there is more to do.(SYNC_W_PROGRESS)

00040820,%x20.08.04.00

NewerClientChange In a change conflict, the client has the more recent change.(SYNC_W_CLIENT_CHANGE_NEWER)

00040821,%x21.08.04.00

IsamWarningRemainingVersions The version store is still active. (JET_wrnRemainingVersions)

00000141, %x41.01.00.00

IsamWarningUniqueKey A seek on a non-unique index yielded a unique key. (JET_wrnUniqueKey)

00000159, %x59.01.00.00

IsamWarningSeparateLongValue A database column is a separated long value. (JET_wrnSeparateLongValue)

00000196, %x96.01.00.00

62 / 122





IsamWarningExistingLogFileHasBadSignature The existing log file has a bad signature. (JET_wrnExistingLogFileHasBadSignature)

0000022E, %x2E.02.00.00

IsamWarningExistingLogFileIsNotContiguous The existing log file is not contiguous. (JET_wrnExistingLogFileIsNotContiguous)

0000022F, %x2F.02.00.00

IsamWarningSkipThisRecord This error is for internal use only. (JET_wrnSkipThisRecord)

00000234, %x34.02.00.00

IsamWarningTargetInstanceRunning The TargetInstance specified for the restore is running. (JET_wrnTargetInstanceRunning)

00000242, %x42.02.00.00

IsamWarningDatabaseRepaired The database corruption has been repaired. (JET_wrnDatabaseRepaired)

00000253, %x53.02.00.00

IsamWarningColumnNull The column has a NULL value. (JET_wrnColumnNull)

000003EC, %xEC.03.00.00

IsamWarningBufferTruncated The buffer is too small for the data. (JET_wrnBufferTruncated)

000003EE, %xEE.03.00.00

IsamWarningDatabaseAttached The database is already attached. (JET_wrnDatabaseAttached)

000003EF, %xEF.03.00.00

IsamWarningSortOverflow The sort that is being attempted does not have enough memory to complete. (JET_wrnSortOverflow)

000003F1, %xF1.03.00.00

IsamWarningSeekNotEqual An exact match was not found during a seek. (JET_wrnSeekNotEqual, JET_wrnRecordFoundGreater, JET_wrnRecordFoundLess)

0000040F, %x0F.04.00.00

IsamWarningNoErrorInfo There is no extended error information. (JET_wrnNoErrorInfo)

0000041F, %x1F.04.00.00

IsamWarningNoIdleActivity No idle activity occurred. (JET_wrnNoIdleActivity)

00000422, %x22.04.00.00

IsamWarningNoWriteLock There is a no write lock at transaction level 0. (JET_wrnNoWriteLock)

0000042B, %x2B.04.00.00

IsamWarningColumnSetNull The column is set to a NULL value. (JET_wrnColumnSetNull)

0000042C, %x2C.04.00.00

IsamWarningTableEmpty An empty table was opened. (JET_wrnTableEmpty)

00000515, %x15.05.00.00

IsamWarningTableInUseBySystem The system cleanup has a cursor open on the table. (JET_wrnTableInUseBySystem)

0000052F, %x2F.05.00.00

IsamWarningCorruptIndexDeleted The out-of-date index must be removed. 00000587,

63 / 122





(JET_wrnCorruptIndexDeleted) %x87.05.00.00

IsamWarningColumnMaxTruncated The max length is too large and has been truncated. (JET_wrnColumnMaxTruncated)

000005E8, %xE8.05.00.00

IsamWarningCopyLongValue A BLOB value has been moved from the record into a separate storage of large BLOBs. (JET_wrnCopyLongValue)

000005F0, %xF0.05.00.00

IsamWarningColumnSkipped The column values were not returned because the corresponding column ID or itagSequence member from the JET_ENUMCOLUMNVALUE structure that was requested for enumeration was null. (JET_wrnColumnSkipped)

000005FB, %xFB.05.00.00

IsamWarningColumnNotLocal The column values were not returned because they could not be reconstructed from the existing data. (JET_wrnColumnNotLocal)

000005FC, %xFC.05.00.00

IsamWarningColumnMoreTags The existing column values were not requested for enumeration. (JET_wrnColumnMoreTags)

000005FD, %xFD.05.00.00

IsamWarningColumnTruncated The column value was truncated at the requested size limit during enumeration. (JET_wrnColumnTruncated)

000005FE, %xFE.05.00.00

IsamWarningColumnPresent The column values exist but were not returned by the request. (JET_wrnColumnPresent)

000005FF, %xFF.05.00.00

IsamWarningColumnSingleValue The column value was returned in JET_COLUMNENUM as a result of the JET_bitEnumerateCompressOutput being set. (JET_wrnColumnSingleValue)

00000600, %x00.06.00.00

IsamWarningColumnDefault The column value is set to the default value of the column. (JET_wrnColumnDefault)

00000601, %x01.06.00.00

IsamWarningDataHasChanged The data has changed. (JET_wrnDataHasChanged)

0000064A, %x4A.06.00.00

IsamWarningKeyChanged A new key is being used. (JET_wrnKeyChanged)

00000652, %x52.06.00.00

IsamWarningFileOpenReadOnly The database file is read only. (JET_wrnFileOpenReadOnly)

00000715, %x15.07.00.00

IsamWarningIdleFull The idle registry is full. (JET_wrnIdleFull) 00000774, %x74.07.00.00

IsamWarningDefragAlreadyRunning There was an online defragmentation 000007D0,

64 / 122





already running on the specified database. (JET_wrnDefragAlreadyRunning)

%xD0.07.00.00

IsamWarningDefragNotRunning An online defragmentation is not running on the specified database. (JET_wrnDefragNotRunning)

000007D1, %xD1.07.00.00

IsamWarningCallbackNotRegistered A non-existent callback function was unregistered. (JET_wrnCallbackNotRegistered)

00000834, %x34.08.00.00

IsamWarningNotYetImplemented The function is not yet implemented. (JET_wrnNyi)

FFFFFFFF, %xFF.FF.FF.FF

2.5 Flat UIDThe FlatUID structure is a byte-order independent version of a GUID structure and is used to uniquely identify a service provider. It appears in EntryIDs.

The FlatUID_r structure is an encoding of the FlatUID data structure. The semantic meaning is unchanged from the FlatUID data structure.

2.5.1 FlatUIDA FlatUID is a GUID structure put into little-endian byte order. That is, FlatUID and GUID structures have the same byte order when used on a little-endian processor. However, on a big-endian processor, the FlatUID has the same byte order as on the little-endian machine, but the GUID uses big-endian format for certain fields

FlatUID (16 bytes): A flat 16-byte little-endian sequence used as a unique identifier in various structures.

2.5.2 FlatUID_r

FlatUID (16 bytes): A flat 16-byte little-endian sequence used as a unique identifier in various structures.

2.6 PropertyNameThe PropertyName structure describes a named property. It is used in RopGetPropertyIdsFromNames and RopGetNamesFromPropertyIds requests.

The PropertyName_r structure, specified in [MS-NSPI], is an encoding of the PropertyName data structure, as specified in section 2.6.1. Strictly speaking, PropertyName_r and PropertyName are distinct encodings off the same abstract data structure rather than PropertyName_r being an encoding of PropertyName. In this case, the semantics of the PropertyName_r structure is different from the PropertyName structure; PropertyName_r uses no string names, only LIDs.

65 / 122




http://msdn.microsoft.com/en-us/library/cc463882.aspx

The packet diagrams in sections 2.6.1 and 2.6.2 illustrate the differences between the two structures.

2.6.1 PropertyName

Kind (1 byte): "0x00" if the property is identified by a LID, and "0x01" if the property is identified by a name.

GUID (16 bytes): The GUID that identifies the property set for the named property.

Note Note: Servers MUST NOT swap bytes for this GUID; it is treated as a FLATUID. Client code on big-endian systems MUST therefore place GUID fields in little-endian byte order in the request buffer.

LID (4 bytes, optional): Present only if Kind = "0x00". An unsigned 32-bit integer that identifies the named property within its property set.

NameSize (1 byte, optional): Present only if Kind = "0x01". A single byte giving the number of bytes in the Name string that follows it.

Name (variable, optional): Present only if Kind = "0x01". A Unicode (UTF-16) string, followed by two zero bytes as a null terminator, that identifies the property within its property set.

2.6.2 PropertyName_rThe PropertyName_r structure does not support string names for named properties. PropertyName_r only supports LIDs.

66 / 122




GUID (16 bytes): Encodes the GUID field of the PropertyName structure. For more details, see section 2.6.1.

Reserved (4 bytes): All clients and servers MUST set this value to "0x00000000".

LID (4 bytes): Encodes the LID field in the PropertyName structure. For more details, see section 2.6.1. Unlike the LID field in the PropertyName structure, the LID field is always present in the PropertyName_r structure. It is not optional. Also, string names for named properties are not allowed.

2.7 PropertyProblemA PropertyProblem describes an error relating to an operation involving a property. It is often used in an array; see PropertyProblemArray.

Index (2 bytes): Unsigned 16-bit integer. This value specifies an index into an array of property tags.

PropertyTag (4 bytes): PropertyTag structure. This value specifies the property for which there was an error.

ErrorCode (4 bytes): Unsigned 32-bit integer. This value specifies the error that occurred when processing this property.

An array of PropertyProblem structures is returned from the following ROPs:

RopDeleteProperties

RopDeletePropertiesNoReplicate <10>

RopSetProperties

RopSetPropertiesNoReplicate <11>

RopCopyProperties

RopCopyTo

A PropertyProblem structure contains an error value that is a result of an operation attempting to modify or delete a property, as specified in Table 7. That property is identified by its PropertyTag, and also by its index in the property array passed to the request.

2.8 PropertyProblemArrayA PropertyProblemArray is a set of PropertyProblems that describe errors relating to an operation involving one or more properties.

67 / 122




Count (2 bytes): Unsigned 16-bit integer, specifying the number of PropertyProblems to follow.

Problems: CountPropertyProblem structures, as specified in section 2.7.

2.9 PropertyRows

2.9.1 PropertyRowA PropertyRow structure is used to pass back a list of property values without including the property tag values that correspond to them. It is used to format property data returned to the client when the list of property tags is known in advance.

For instance, this data structure is used to format the response buffers of RopGetPropertiesSpecific, RopFindRow, and RopGetReceiveFolderTable. In addition, an array of PropertyRow structures makes up the key part of the PropertyRowSet structure returned in the response buffer for RopQueryRows. Finally, PropertyRow structures used in table notification structures to indicate the column values of a new added or modified row.

Since the property tags are not returned, clients interpret the property values based on the context of the request. For RopGetPropertiesSpecific, property values are returned in the order that the properties were requested. For RopFindRow, RopGetReceiveFolderTable, and RopQueryRows, property values are returned in the order of the properties in the table, set by a prior call to RopSetColumns.

There are three PropertyRow variants. A StandardPropertyRow contains no error values and no type data; it is simply a sequence of property values. A FlaggedPropertyRow contains type data, if the request included PtypUnspecified for any property or column, and it contains error values if a property value is missing or there was a problem retrieving the value. By examining the first byte of the property row, the client can identify the variant. A PropertyRow_r, as specified in [MS-NSPI], is an encoding of the StandardPropertyRow data structure, as specified in section 2.9.1.1. The semantic meaning is unchanged from the StandardPropertyRow structure.

2.9.1.1 StandardPropertyRow

Flag (1 byte): Unsigned 8-bit integer. This MUST be set to "0x00" to indicate that all property values are present and without error.

ValueArray (Variable): An array of variable-sized structures. At each position of the array, the structure will either be a PropertyValue structure (see section 2.12.2.1) if the type of the corresponding property tag was specified, or a TypedPropertyValue structure (see section 2.12.3) if the type of the corresponding property tag was PtypUnspecified.

68 / 122





2.9.1.2 FlaggedPropertyRow

Flag (1 byte): Unsigned 8-bit integer. This MUST be set to "0x01" to indicate that there are errors or some property values are missing. This MUST also be set to "0x01" to indicate when PtypUnspecified was used in the ROP request and the ROP response includes a type.

ValueArray (Variable): An array of variable-sized structures. At each position of the array, the structure will either be a FlaggedPropertyValue structure (see section 2.12.5) if the type of the corresponding property tag was previously specified, or a FlaggedPropertyValueWithTypeSpecified structure (see section 2.12.6) if the type of the corresponding property tag was PtypUnspecified.

2.9.1.3 PropertyRow_r


ValueCount (4 bytes): The number of property values represented in the ValueArray field. This value MUST NOT exceed 100,000.

ValueArray (variable size): Encodes the ValueArray field of StandardPropertyRow structure. For more details, see section 2.9.1.1.

2.9.2 PropertyRowSetA PropertyRowSet is a counted series of PropertyRows. As for PropertyRow, the number of columns in each PropertyRow is not included in the PropertyRowSet.

In table operations, such as in the response to a RopQueryRows request, servers SHOULD truncate long column values to a maximum of 255 bytes (for binary types) or 255 characters (for string types). <12> Clients analyzing data returned from table operations can assume that if the length of such a value is exactly 255 bytes or characters, then the value of the same property obtained by opening the message and issuing a RopGetPropertiesSpecific request is likely to be larger.

The PropertyRowSet_r structure, as specified in [MS-NSPI], is an encoding of the PropertyRowSet data structure, as specified in section 2.9.2.1. The permissible number of PropertyRows in the PropertyRowSet_r data structure exceeds that of the PropertyRowSet data structure. For more details, see section 2.9.2.2. The semantic meaning is otherwise unchanged from the PropertyRowSet data structure.

69 / 122





2.9.2.1 PropertyRowSet

RowCount (2 bytes): An unsigned 16-bit integer specifying the number of PropertyRows that follow.

Rows (variable size): A series of RowCount PropertyRow structures.

2.9.2.2 PropertyRowSet_r

RowCount (2 bytes): Encodes the RowCount field of the PropertyRowSet structure. For more details, see section 2.9.2.1. This value MUST NOT exceed 100,000.

Rows (variable size): Encodes the rows field of the PropertyRowSet structure. For more details, see section 2.9.2.1.

2.9.3 RecipientRowA RecipientRow structure represents a single recipient belonging to a Message object. It is rather complex, but can be considered as a sequence of three different parts:

A flags field indicating which of several standard properties are present

Standard property values

Arbitrary property values outside the standard set

This structure is used by several ROPs including:

RopReadRecipients

RopOpenMessage

RopOpenEmbeddedMessage

First, we specify the RecipientFlags field.

2.9.3.1 RecipientFlags

70 / 122




R (1 bit): 1-bit flag (mask 0x0080). If b'1', a different transport is responsible for delivery to this recipient.

S (1 bit): 1-bit flag (mask 0x0040). If b'1', the Transmittable Display Name is the same as the Display Name.

T (1 bit): 1-bit flag (mask 0x0020). If b'1', the TransmittableDisplayName field is included.

D (1 bit): 1-bit flag (mask 0x0010). If b'1', the DisplayName field is included.

E (1 bit): 1-bit flag (mask 0x0008). If b'1', the EmailAddress field is included.

Type (3 bits): 3-bit enumeration (mask 0x0007). This enumeration specifies the type of address. The valid types are:

NoType ("0x0")

X500DN ("0x1")

MsMail ("0x2")

SMTP ("0x3")

Fax ("0x4")

ProfessionalOfficeSystem ("0x5")

PersonalDistributionList1 ("0x6")

PersonalDistributionList2 ("0x7")

O (1 bit): 1-bit flag (mask 0x8000). If b'1',this recipient has a non-standard address type and the AddressType field is included.

Reserved (4 bits): (mask 0x7800) The server MUST set this to b'0000'.

I (1 bit): 1-bit flag (mask 0x0400). If b'1', the SimpleDisplayName is included.

U (1 bit): 1-bit flag (mask 0x0200). If b'1', the associated string properties are in Unicode with a 2-byte null terminator; if b'0', string properties are MBCS with a single null terminator, in the code page sent to the server in EcDoConnect (as specified in [MS-OXCRPC]).

N (1 bit): 1-bit flag (mask 0x0100). This flag specifies that the recipient does not support receiving rich text messages.

71 / 122




2.9.3.2 RecipientRow

RecipientFlags (2 bytes): RecipientFlags structure. The format of this structure is defined in section 2.9.3.1. This value specifies the type of recipient and which standard properties are included.

AddressPrefixUsed (1 byte, optional): Unsigned 8-bit integer. This field MUST be present when the Type field of the RecipientFlags field is set to X500DN ("0x1") and MUST NOT be present otherwise. This value specifies the amount of the Address Prefix is used for this X500 DN.

DisplayType (1 byte, optional): 8-bit enumeration. This field MUST be present when the Type field of the RecipientFlags field is set to X500DN ("0x1") and MUST NOT be present otherwise. This value specifies the display type of this address.

X500DN (variable, optional): Null-terminated ASCII string. This field MUST be present when the Type field of the RecipientFlags field is set to X500DN ("0x1") and MUST NOT be present otherwise. This value specifies the X500 DN of this recipient.

EntryIdSize (2 bytes, optional): Unsigned 16-bit integer. This field MUST be present when the Type field of the RecipientFlags field is set to PersonalDistributionList1 ("0x6") or PersonalDistributionList2 ("0x7"). This field MUST NOT be present otherwise. This value specifies the size of the EntryID field.

EntryID (variable, optional): Array of bytes. This field MUST be present when the Type field of the RecipientFlags field is set to PersonalDistributionList1 ("0x6") or PersonalDistributionList2 ("0x7"). This field MUST NOT be present otherwise. The number of bytes in this field MUST be the same as specified in the EntryIdSize field. This array specifies the address book EntryID of the distribution list.

SearchKeySize (2 bytes, optional): Unsigned 16-bit integer. This field MUST be present when the Type field of the RecipientFlags field is set to PersonalDistributionList1 ("0x6") or PersonalDistributionList2 ("0x7"). This field MUST NOT be present otherwise. This value specifies the size of the SearchKey field.

72 / 122




SearchKey (variable, optional): Array of bytes. This field MUST be present when the Type field of the RecipientFlags field is set to PersonalDistributionList1 ("0x6") or PersonalDistributionList2 ("0x7"). This field MUST NOT be present otherwise. The number of bytes in this field MUST be the same as specified in the SearchKeySize field. This array specifies the Search Key of the distribution list.

AddressType (variable, optional): Null-terminated ASCII string. This field MUST be present when the Type field of the RecipientFlags field is set to NoType ("0x0") and the O flag of the RecipientsFlags field is set. This field MUST NOT be present otherwise. This string specifies the address type of the recipient.

EmailAddress (variable, optional): Null-terminated string. This field MUST be present when the E flag of the RecipientsFlags field is set and MUST NOT be present otherwise. This field MUST be specified in Unicode characters if the U flag of the RecipientsFlags field is set and 8-bit character set otherwise. This string specifies the Email Address of the recipient.

DisplayName (variable, optional): Null-terminated string. This field MUST be present when the D flag of the RecipientsFlags field is set and MUST NOT be present otherwise. This field MUST be specified in Unicode characters if the U flag of the RecipientsFlags field is set and 8-bit character set otherwise. This string specifies the Email Address of the recipient.

SimpleDisplayName (variable, optional): Null-terminated string. This field MUST be present when the I flag of the RecipientsFlags field is set and MUST NOT be present otherwise. This field MUST be specified in Unicode characters if the U flag of the RecipientsFlags field is set and 8-bit character set otherwise. This string specifies the Email Address of the recipient.

TransmittableDisplayName (variable, optional): Null-terminated string. This field MUST be present when the T flag of the RecipientsFlags field is set and MUST NOT be present otherwise. This field MUST be specified in Unicode characters if the U flag of the RecipientsFlags field is set and 8-bit character set otherwise. This string specifies the Email Address of the recipient.

RecipientColumnCount (2 bytes): Unsigned 16-bit integer. This value specifies the number of columns from the RecipientColumns field that are included in RecipientProperties.

RecipientProperties (variable): PropertyRow structures. The format of the PropertyRow structure is defined in section 2.9.1 and the columns used for this row are those specified in RecipientProperties.

2.10 PropertyTag, PropertyIdA property tag both identifies a property and gives the data type of its value. Please refer to [MS-OXPROPS] and other sections of this document for further information about PropertyIds and PropertyValues.

PropertyType (2 bytes): A 16-bit unsigned integer that identifies the data type of the property value, as specified by the table in section 2.12.1.

PropertyId (2 bytes): A 16-bit unsigned integer that identifies the property.

2.11 PropertyTagArrayA PropertyTagArray is simply a counted set of property tags, as specified in section 2.11.1.

73 / 122




The PropertyTagArray_r structure is an encoding of the PropTagArray data structure. The permissible number of proptag values in the PropertyTagArray_r structure exceeds that of the PropertyTagArray data structure. The semantic meaning is otherwise unchanged from the PropTagArray data structure.

2.11.1 PropertyTagArray

Count (2 bytes): Unsigned 16-bit integer, specifying the number of property tags to follow.

PropertyTags: Count unsigned 32-bit integers representing property tags.

2.11.2 PropertyTagArray_r

Count (2 bytes): Encodes the Count Field in PropTagArray. For more details, see section 2.11.1. This field MUST NOT exceed 100,000.

PropertyTags (variable size): Encodes the PropertyTags field of PropTagArray. For more details, see section 2.11.1.

2.12 Property ValuesThere are a variety of structures used for conveying the value of a property to and from the server. Some variants contain only the value, because the usage context dictates the type. Other variants include the type, or the full property tag. Still others include an indication of whether an error occurred.

2.12.1 Property Value TypesFor all variants, the structure of a property value is the same and is specified by the property value type, whether or not the property value type is actually encoded in the buffer. The following table lists both the property value type identifiers and the format of the property values themselves. WebDAV protocol property value type identifiers are specified in section 2.12.1.5.

There is one variation in the width of count fields. In the context of ROP buffers, such as RopGetPropertiesSpecific, byte counts for PtypBinary property values and value counts for all PtypMultiple property values are 16 bytes wide. But in the context of extended rules, as specified in [MS-OXRULE], byte counts and property value counts are 32 bits wide (for example, COUNT in the table below represents a 32-bit integer). Such count fields have a width designation of COUNT, rather than an explicit 1-byte width, throughout section 2.12.

In the context of a table operation, properties are referred to as columns. The format of property identifiers, types, and values in table operations such as RopQueryRows is the same as in property operations such as RopGetPropertiesSpecific.property value types are presented in the following

74 / 122




table. The property value type values specified are 16-bit integers. The NSPI protocol uses the same numeric values, but expresses them as 32-bit integers, with the high-order 16 bits of the 32-bit representation used by the NSPI protocol always set to "0x0000." For more information, see [MS-NSPI].

Property Type Name

Property Type Value Property Type Specification Alternate Names

PtypInteger16 0x0002,%x02.00

2 bytes, a 16-bit integer[MS-DTYP]: INT16

PT_SHORT, PT_I2, i2, ui2


4 bytes, a 32-bit integer[MS-DTYP]: INT32

PT_LONG, PT_I4, int, ui4

PtypFloating32 0x0004,%x04.00

4 bytes, a 32-bit floating point number[MS-DTYP]: FLOAT

PT_FLOAT, PT_R4, float, r4

PtypFloating64 0x0005,%x05.00

8 bytes, a 64-bit floating point number[MS-DTYP]: DOUBLE

PT_DOUBLE, PT_R8, r8

PtypCurrency 0x0006,%x06.00

8 bytes, a 64-bit signed, scaled integer representation of a decimal currency value, with 4 places to the right of the decimal point[MS-DTYP]: LONGLONG[MS-OAUT]: CURRENCY

PT_CURRENCY, fixed.14.4

PtypFloatingTime 0x0007,%x07.00

8 bytes, a 64-bit floating point number in which the whole number part represents the number of days since December 30, 1899, and the fractional part represents the fraction of a day since midnight[MS-DTYP]: DOUBLE[MS-OAUT]: DATE

PT_APPTIME

PtypErrorCode 0x000A,%x0A.00

4 bytes, a 32-bit integer encoding error information as specified in section 2.4.1

PT_ERROR

PtypBoolean 0x000B,%x0B.00

1 byte, restricted to 1 or 0[MS-DTYP]: BOOLEAN

PT_BOOLEAN. bool


8 bytes, a 64-bit integer[MS-DTYP]: LONGLONG

PT_LONGLONG, PT_I8, i8, ui8

PtypString 0x001F,%x1F.00

Variable size, a string of Unicode characters in UTF-16LE encoding with terminating null character (2 bytes of zero)

PT_UNICODE, string

PtypString8 0x001E,%z1E.00

Variable size, a string of multi-byte characters in externally specified encoding with terminating null

PT_STRING8

75 / 122
















Property Type Name


character (single 0 byte)

PtypTime 0x0040,%x40.00

8 bytes, a 64-bit integer representing the number of 100-nanosecond intervals since January 1, 1601[MS-DTYP]: FILETIME

PT_SYSTIME, time, datetime, datetime.tz, datetime.rfc1123, Date, time, time.tz

PtypGuid 0x0048,%x48.00

16 bytes, a GUID with Data1, Data2, and Data3 fields in little-endian format[MS-DTYP]: GUID

PT_CLSID, UUID

PtypServerId 0x00FB,%xFB.00

Variable size, a 16-bit count followed a structure specified in section 2.12.1.3.

PT_SVREID

PtypRestriction 0x00FD,%xFD.00

Variable size, a byte array representing one or more Restriction structures as specified in section 2.13.

PT_SRESTRICT

PtypRuleAction 0x00FE,%xFE.00

Variable size, a 16-bit count of actions (not bytes) followed by that many Rule Action structures, as specified in [MS-OXORULE]

PT_ACTIONS

PtypBinary 0x0102,%x02.01

Variable size, a COUNT followed by that many bytes

PT_BINARY

PtypMultipleInteger16 0x1002,%x02.10

Variable size, a COUNT followed by that many PtypInteger16 values

PT_MV_SHORT, PT_MV_I2, mv.i2



PT_MV_LONG, PT_MV_I4, mv.i4

PtypMultipleFloating32 0x1004,%x04.10

Variable size, a COUNT followed by that many PtypFloating32 values

PT_MV_FLOAT, PT_MV_R4, mv.float

PtypMultipleFloating64 0x1005,%x05.10

Variable size, a COUNT followed by that many PtypFloating64 values

PT_MV_DOUBLE, PT_MV_R8

PtypMultipleCurrency 0x1006,%x06.10

Variable size, a COUNT followed by that many PtypCurrency values

PT_MV_CURRENCY, mv.fixed.14.4

PtypMultipleFloatingTime

0x1007,%x07.10

Variable size, a COUNT followed by that many PtypFloatingTime values

PT_MV_APPTIME



PT_MV_I8, PT_MV_LONGLONG

PtypMultipleString 0x101F, Variable size, a COUNT followed by PT_MV_UNICODE

76 / 122






Property Type Name


%x1F.10 that PtypString values

PtypMultipleString8 0x101E,%x1E.10

Variable size, a COUNT followed by that many PtypString8 values

PT_MV_STRING8, mv.string

PtypMultipleTime 0x1040,%x40.10

Variable size, a COUNT followed by that many PtypTime values

PT_MV_SYSTIME

PtypMultipleGuid 0x1048,%x48.10

Variable size, a COUNT followed by that many PtypGuid values

PT_MV_CLSID, mv.uuid

PtypMultipleBinary 0x1102,%x02.11

Variable size, a COUNT followed by that many PtypBinary values

PT_MV_BINARY, mv.bin.hex

PtypUnspecified 0x0000,%x00.00

Any: this property type value matches any type; a server MUST return the actual type in its response. Servers MUST NOT return this type in response to a client request other than NspiGetIDsFromNames or RopGetPropertyIdsFromNames.

PT_UNSPECIFIED

PtypNull 0x0001,%x01.00

None: This property is a placeholder PT_NULL

PtypObject or PtypEmbeddedTable

0x000D,%x0d.00

The property value is a COM object, as specified in section 2.12.1.4

PT_OBJECT

2.12.1.1 String Property ValuesClients SHOULD work with PtypString and PtypMultipleString properties in Unicode format. When working with strings in Unicode format, string data MUST be encoded as UTF-16LE, and property data types MUST be specified as "0x001F" (PtypString) and "0x101F" (PtypMultipleString).

Clients can, instead, work with PtypString8 and PtypMultipleString8 properties in a specific 8-bit or multibyte code page. In this case, property data types MUST be formatted as "0x001E"(PtypString8) and "0x101E" (PtypMultipleString8).

In requests sent to a store server, the code page of strings MUST match the code page sent to the server in EcDoConnect or similar RPC, as specified in [MS-OXCRPC]. address book server rules for working with PtypString8 properties are somewhat more involved, and are specified in [MS-NSPI].

2.12.1.2 Multi-Valued Property Value InstancesWhen working with multi-valued columns in the context of table operations, clients set the "0x2000" (MultivalueInstance, "%x00.20") flag bit in the column's PropertyType field to indicate that the multi-valued column is to be treated as individual values. The MultivalueInstance flag MUST NOT be set for any column that does not also set the "0x1000" (Multivalue) bit in its property type. All PtypMultiple types in table 10 let the "0x1000" bit.

77 / 122





The MultivalueInstance flag causes table operations to treat multi-valued columns as if they were multiple instances of a single-valued column. Please refer to [MS-OXCTABL] for table ROP specifications.

2.12.1.3 The PtypServerId TypeThis property type encapsulates a Store object EntryID. A ServerId identifies either a Folder Object or a Message object.

Ours (1 byte): "0x01" indicates the remaining bytes conform to this structure; "0x00" indicates this is a client-defined value, and has whatever size and structure the client has defined.

folder ID (8 bytes): A FID, as specified in section 2.2.1.1, identifying a folder.

message ID (8 bytes): A MID, as specified in section 2.2.1.2, identifying a message in the folder identified by folder ID. If the object is a folder, then this field MUST be all zeros.

Instance (4 bytes): A 32-bit unsigned instance number within an array of ServerIds to compare against. This field is used only for searches against multi-value properties and MUST be zero in any other context.

2.12.1.4 PtypObject and PtypEmbeddedTableStore and address book servers treat this property type somewhat differently, but in both cases a property of this type represents a complex structure. Access to properties of this type requires the server to construct an object, and the client to issue requests similar to those used for top-level objects.

Store servers do not allow access to properties of type PtypObject through RopGetPropertiesSpecific or RopGetPropertiesAll. Instead, properties of this type MUST be accessed with RopOpenStream or RopOpenEmbeddedMessage requests, as specified in [MS-OXCROPS].

Address book servers use PtypEmbeddedTable to designate properties whose value is a table, for example, the members of a distribution list. The necessary methods are specified in [MS-NSPI].

2.12.1.5 WebDAV Property Value TypesWebDAV property value types are specified for a property by using the "dt" attribute from the namespace "urn:uuid:c2f41010-65b3-11d1-a29f-00aa00c14882/".

The WebDAV property types are listed in the following table. Unless their formats are specified elsewhere, all property type formats are specified in Augmented Backus-Naur Form (ABNF) notation [RFC4234].

Server Property Type Name

WebDAV Property Type Name

Description Format

PtypBinary i1 The Unicode value of the element is interpreted as an optionally

As a byte, as specified in [W3C-XML]Example: <element... d:dt="i1">3</element>

78 / 122










Description Format

signed 1 byte, 8-bit decimal integer.

PtypInteger16

i2 The Unicode value of the element is interpreted as a optionally signed 2 byte, 16-bit decimal integer.

As a short, as specified in [W3C-XML]Example: <element... d:dt="i2">-255</element>

PtypInteger32

int The Unicode value of the element is interpreted as a optionally signed 4 byte, 32-bit decimal integer.

As an int, as specified in [W3C-XML]Example: <element... d:dt="int">-53496</element>

PtypInteger64

i8 The Unicode value of the element is interpreted as a optionally signed 8 byte, 64-bit decimal integer.

As a long, as specified in [W3C-XML]Example:<element... d:dt="i8">-32415</element>

PtypBinary ui1 The Unicode value of the element is interpreted as an unsigned 1 byte, 8-bit decimal integer.

As an unsignedByte, as specified in [W3C-XML]Example:<element... d:dt="ui1">255</element>

79 / 122










Description Format

PtypInteger16

ui2 The Unicode value of the element is interpreted as an unsigned 2 byte, 16-bit decimal integer.

As an unsignedShort, as specified in [W3C-XML]Example:<element... d:dt="ui2">2296</element>

PtypInteger32


As an unsignedInt, as specified in [W3C-XML]Example:<element... d:dt="ui4">32768</element>

PtypInteger64


As an unsignedLong, as specified in [W3C-XML]Example:<element... d:dt="ui8">-189</element>

PtypFloating64

float The Unicode value of the element is interpreted as a single precision floating point number

float-val = (["+"] / "-") [1*DIGIT] ["." 1*DIGIT] ["d" / "D" / "e" / "E" (["+"] / "-") 1*DIGIT]Example:<element... d:dt="float">9.9</element>

PtypFloating32

r4 The Unicode value of the element is interpreted as a 4 byte

r4-val = (["+"] / "-") [1*DIGIT] ["." 1*DIGIT] ["d" / "D" / "e" / "E" (["+"] / "-") 1*DIGIT]Example:<element... d:dt="r4">9.9</element>

80 / 122









Description Format

single precision floating point number

PtypFloating64

r8 The Unicode value of the element is interpreted as a 8 byte double precision floating point number

r8-val = (["+"] / "-") [1*DIGIT] ["." 1*DIGIT] ["d" / "D" / "e" / "E" (["+"] / "-") 1*DIGIT]Example:<element... d:dt="r8">.333333333</element>

PtypBoolean boolean The Unicode value of the element is interpreted Boolean value either "1" (TRUE) or "0" (FALSE).

As a boolean, as specified in [W3C-XML]Example:<element... d:dt="boolean">1</element>

PtypString string The Unicode value of the element is interpreted as a sequence of Unicode characters

As a string, as specified in [W3C-XML]Example:<element... d:dt="string">Description</element>

PtypString char The Unicode value of the element is interpreted as a single Unicode character. The character data type

char-val = 1VCHARExample:<element... d:dt="char">D</element>

81 / 122








Description Format

maps to a string and can be used for any sequence of Unicode characters.

PtypCurrency fixed.14.4 The Unicode value of the element is interpreted as an optionally signed floating point number with no more than 14 digits to the left of the decimal point, and no more than 4 digits to the right of the decimal point. This value type is normally used to represent currency values

fixed144-val = 0*14DIGIT "." 0*4 DIGITExample:<element... d:dt="fixed.14.4">00000000000012.9500</element>

PtypString number The Unicode value of the element is interpreted as a number, limited by the operating system limits,

As a string, as specified in [W3C-XML]Example:<element... d:dt="number">-123.456E+10</element>

82 / 122







Description Format

which can optionally contain a leading sign, fractional digits, and an exponent.

PtypTime dateTime The Unicode value of the element is interpreted as a date and time value expressed in [ISO-8601] format with no time zone specified

As specified in [ISO-8601]Example:<element... d:dt="datetime">2008-09-19T18:53:47.060</element>

PtypTime dateTime.tz The Unicode value of the element is interpreted as a date and time value expressed in [ISO-8601] format with an optional time zone identifier

As specified in [ISO-8601]Example:<element... d:dt="datetime.tz">2008-09-19T18:53:47.060Z</element><element... d:dt="datetime.tz">2008-09-19T18:53:47.060-0700</element>

PtypTime dateTime.rfc1123

The Unicode Value of the element is interpreted as a date and time value expressed in

As specified in [RFC1123]Example:<element... d:dt="datetime.rfc1123">Mon, 15 Feb 1999 13:05:29-0700</element>

83 / 122













Description Format

[RFC1123] format

PtypTime Date The Unicode value of the element is interpreted as a date value that is expressed in [ISO-8601] format with no time or time zone specified.

As specified in [ISO-8601]Example:<element... d:dt="date">2008-09-18</element>

PtypTime time The Unicode value of the element is interpreted as a time value expressed in [ISO-8601] format with no date or time zone specified

As specified in [ISO-8601]Example:<element... d:dt="time">19T18:53:47.060</element>

PtypTime time.tz The Unicode value of the element is interpreted as a time value expressed in [ISO-8601] format with an optional time zone identifier

As specified in [ISO-8601]Example:<element... d:dt="time.tz">19T18:53:47.060Z</element><element... d:dt="time.tz">19T18:53:47.060-0700</element>

PtypString uri The Unicode value of

As specified in [RFC3986]Example:

84 / 122


















Description Format

the element is interpreted as a uniform resource identifier as specified in [RFC3986]

<element... d:dt="uri">http://www.example.com/</element>

PtypGuid uuid The Unicode value of the element is interpreted as a universally unique identifier as specified in [RFC4122]

As specified in [RFC4122]Example:<element... d:dt="uuid">55B329F4-EF8A-4fac-A47C-C81213DB3061</element>

PtypBinary bin.hex The Unicode value of the element is interpreted as a binary blob encoded in hexadecimal digits.

As specified in [W3C-XML]Example:<element... d:dt="bin.hex">1f8b9d</element>

PtypBinary bin.base64 The Unicode value of the element is terpreted as Binary blob encoded in Base-64 as specified in [RFC2045]

As specified in [RFC2045]Example:<element... d:dt="bin.base64">jfsSUsdjsdsUSDASjsdsusaqiq</element>

85 / 122













2.12.1.5.1 Multi-Valued WebDAV Property Value TypesWebDAV supports multi-valued properties where the value of the specified property is an array of items of a specific type. Multi-valued properties are represented in the XML markup by using the "dt" attribute with the value "mv", followed by the data type of the contents of the array.

For example, an array of strings is represented by the following:

<author d:dt="mv.string"></author>

Within the property element, the contents of the array are specified by a number of sub-elements, each with the element name "v" from the "xml" namespace. For example:

<author xmlns:x="xml:" d:dt="mv.string">

<x:v>Attila Biber</x:v>

<x:v>Kirk DeGrasse</x:v>

</author>

The following table lists the multi-valued property value types supported by WebDAV.

server property type name WebDAV Type Name

PtypMultipleInteger16 mv.i2

PtypMultipleInteger32 mv.i4

PtypMultipleFloating64 mv.float

PtypMultipleCurrency mv.fixed.14.4

PtypMultipleString8 mv.string

PtypMultipleBinary mv.bin.hex

PtypMultipleGuid mv.uuid

2.12.1.6 OLE DB TypesWebDAV SEARCH requests also support specifying data types using OLE DB types. The following table lists the property types supported by WebDAV. The OLE DB type names are strings for use in the query grammar specified in [MS-XWDSEARCH].

server property type name WebDAV Property Type Name OLE DB Type Name

PtypBoolean boolean DBTYPE_BOOL

PtypInteger16 i1 DBTYPE_I1


PtypInteger16 ui1 DBTYPE_UI1


PtypInteger32 int DBTYPE_I4

86 / 122




server property type name WebDAV Property Type Name OLE DB Type Name




PtypTime dateTime.tz DBTYPE_FILETIME

PtypFloatingTime dateTime.tz DBTYPE_FILETIME

PtypFloatingTime dateTime.tz DBTYPE_DATE

PtypFloating32 r4 DBTYPE_R4

PtypCurrency fixed.14.4 DBTYPE_CY

PtypFloating64 float DBTYPE_R8

PtypGuid uuid DBTYPE_GUID

PtypString string DBTYPE_WSTR

PtypString string DBTYPE_BSTR

PtypString8 string DBTYPE_STR

PtypBinary bin.base64 DBTYPE_BYTES

2.12.2 PropertyValueThe PropertyValue structure simply specifies the value of the property. It contains no information about the property type or id.

The PropertyValue_r structure, as specified in [MS-NSPI], is an encoding of the PropertyValue data structure, as specified in section 2.12.2.1. For property values with uninterpreted byte values, the permissible number of bytes in the PropertyValue_r structure exceeds that of the PropertyValue data structure, as specified in [MS-NSPI] section 2.3.1.12. For property values with multiple values, the permissible number of values in the PropertyValue_r structure exceeds that of the PropertyValue data structure. The semantic meaning is otherwise unchanged from the PropertyValue data structure.

2.12.2.1 PropertyValue

PropertyValue (variable size): The size varies depending on the property type which can be understood from the usage context. All numeric values are in little-endian format. For multi-valued types, the first element in the ROP buffer is a 16-bit integer specifying the number of entries. If the property value being passed is a string then the data includes the null terminators, as described in Table 10.

87 / 122






2.12.2.2 PropertyValue_r

PropertyTag (4 bytes): Encodes the property tag with the value represented by the PropertyValue_r structure.


PropertyValue (variable size): Encodes the PropertyValue field of the PropertyValue structure. For more details, see section 2.12.2.1. This is the actual value of the property represented by the PropertyValue_r structure. The type value is specified by the PropertyTag field.

2.12.3 TypedPropertyValueThe TypedPropertyValue structure includes the property type with the value of the property.

PropertyType (2 bytes): A 16-bit unsigned integer that specifies the data type of the property value, according to the table in section 2.12.1.

PropertyValue (variable size): A PropertyValue structure as specified in section 2.12.2. The value MUST be compatible with the value of the PropertyType field.

2.12.4 TaggedPropertyValueAs a rule, property tags are not specified explicitly in ROP buffers. To save space, property tags are specified implicitly by a previous operation and only the property values are put in the buffer. But under some circumstances a TaggedPropertyValue is used to explicitly include the property type and ID in the buffer.

PropertyTag (32 bits): A PropertyTag structure giving the PropertyId and PropertyType for the property.

88 / 122




PropertyValue (variable size): A PropertyValue structure specifying the value of the property. Its syntax is specified by the PropertyType field of the tag, and its semantics by the PropertyId field of the tag.

2.12.5 FlaggedPropertyValueThe FlaggedPropertyValue structure includes a flag to indicate whether the value was successfully retrieved or not. Error conditions include a missing property or a failure at the server.

Flag (1 byte): An 8-bit unsigned integer. This flag MUST be set one of three possible values: "0x0", "0x1", or "0xA", which determines what is conveyed in the PropertyValue field. The following table summarizes the meanings of these three values.

Flag value What it implies about the PropertyValue field

0x0 The PropertyValue field will be PropertyValue structure containing a value compatible with the property type implied the context.

0x1 The PropertyValue field is not present.

0xA The PropertyValue field will be a PropertyValue structure containing an unsigned 32-bit integer. This value is a property error code (see section 2.4.2) indicating why the property value is not present.

PropertyValue (variable size): A PropertyValue structure (see section 2.12.2.1) unless the Flag field is "0x1".

2.12.6 FlaggedPropertyValueWithTypeThe FlaggedPropertyValueWithType structure includes both the property type and a flag giving more information about the property value.

PropertyType (2 bytes): A 16-bit unsigned integer that specifies the data type of the property value, according to the table immediately below.

Flag (1 byte): An 8-bit unsigned integer. This flag MUST be set one of three possible values: "0x0", "0x1", or "0xA", which determines what is conveyed in the PropertyValue field. Refer to the table in section 2.12.5 for the interpretation of this flag.

PropertyValue (variable size): A PropertyValue structure (see section 2.12.2.1). The value MUST be compatible with the value of the PropertyType field.

89 / 122




2.12.7 TypedStringA TypedString structure is used in certain ROPs in order to compact the string representation on the wire as much as possible.

StringType (1 byte): 8-bit enumeration. The value MUST be one of the following:

"0x00": There is no string present.

"0x01": The string is empty.

"0x02": Null-terminated 8-bit character string. The null terminator is one zero byte.

"0x03": Null-terminated Reduced Unicode character string. The null terminator is one zero byte.

"0x04": Null-terminated Unicode character string. The null terminator is 2 zero bytes.

String (variable, optional): If the StringType field is set to "0x02", "0x03", or "0x04", then this field MUST be present and in the format specified by the Type field. Otherwise, this field MUST NOT be present.

To produce a Reduced Unicode string from an original Unicode string, the server first scans the original Unicode string and determines that every character has a value less than "0x100"; in other words, that the high-order byte of every character, including the null terminator, is zero. It then produces a Reduced Unicode string that is exactly half the size of the original Unicode string by omitting all the high-order zero bytes, including that of the null terminator.

To reproduce the original Unicode string from a Reduced Unicode string, the server inserts a zero byte after each byte of the Reduced Unicode string, doubling its size.

2.13 RestrictionsRestrictions describe a filter for limiting the view of a table to particular set of rows. This filter represents a Boolean expression that is evaluated against each item of the table. The item will be included as a row of the restricted table if and only if the value of the Boolean expression evaluates to TRUE.

Restrictions are sent to the server with the RopFindRow, RopRestrict, RopSetSearchCriteria, and RopSynchronizationConfigure requests, and are returned from the RopGetSearchCriteria request.

There are 12 different restriction packet formats: Six of them (AndRestriction, OrRestriction, NotRestriction, SubRestriction, CommentRestriction, and CountRestriction) are used to construct more complicated restrictions from one or more simpler ones. The other six types (ContentRestriction, PropertyRestriction, ComparePropertiesRestriction, BitMaskRestriction, SizeRestriction, and ExistRestriction) specify specific tests based on the properties of an item.

While the packet formats differ, the first 8 bits always stores RestrictType, an unsigned byte value specifying the type of restriction. The possible values for RestrictType are presented in the following table.

90 / 122




RestrictTypeHexadecimal value Description Alternate name

AndRestriction AndRestriction_r

0x00 Logical AND operation applied to a list of subrestrictions.

RES_AND

OrRestriction OrRestriction_r

0x01 Logical OR operation applied to a list of subrestrictions.

RES_OR

NotRestriction NotRestriction_r

0x02 Logical NOT applied to a subrestriction

RES_NOT

ContentRestriction ContentRestriction_r

0x03 Search a property value for specific content.

RES_CONTENT

PropertyRestriction PropertyRestriction_r

0x04 Compare a property value to a particular value.

RES_PROPERTY

ComparePropertiesRestriction ComparePropsRestriction_r

0x05 Compare the values of two properties.

RES_COMPAREPROPS

BitMaskRestriction BitMaskRestriction_r

0x06 Perform bitwise AND of a property value with a mask and compare to zero

RES_BITMASK

SizeRestriction SizeRestriction_r

0x07 Compare the size of a property value to a particular figure.

RES_SIZE

ExistRestriction ExistRestriction_r

0x08 Test whether a property has a value.

RES_EXIST

SubObjectRestriction SubRestriction_r

0x09 Test whether any row of a message's attachment or recipient table satisfies a subrestriction.

RES_SUBRESTRICTION

CommentRestriction 0x0A Associates a comment with a subrestriction.

RES_COMMENT

CountRestriction 0x0B Limits the number of matches returned from a subrestriction.

RES_COUNT

The subsections which follow describe each packet format.

There is one variation in the way restriction structures are serialized. In the context of ROP buffers, such as RopRestrict or RopSetSearchCriteria, all count fields (such as the number of subrestrictions of an AndRestriction) are 16 bits wide. But, in the context of extended rules, as specified in [MS-OXORULE], or search folder definition messages, as specified in [MS-OXOSRCH], these counts are 32 bits wide. Such fields are identified as count fields throughout section 2.13.

91 / 122




2.13.1 AndRestrictionThe AndRestriction structure describes an AND restriction, which is used to join a group of restrictions using a logical AND operation.

The AndRestriction_r structure, as specified in [MS-NSPI], is an encoding of the AndRestriction data structure, as specified in section 2.13.1.1. The permissible number of restriction structures in the AndRestriction_r data structure exceeds that of the AndRestriction structure. The semantic meaning is otherwise unchanged from the AndRestriction data structure.

2.13.1.1 AndRestriction

RestrictType (1 byte): Unsigned 8-bit integer. This value indicates the type of restriction and MUST be set to "0x00".

RestrictCount (COUNT): This value specifies how many restriction structures are present in Restricts.

Restricts (variable): Array of restriction structures. This field MUST contain RestrictCount structures.

The result of an AndRestriction is TRUE if all of its child restrictions evaluate to TRUE, and FALSE if any child restriction evaluates to FALSE.

2.13.1.2 AndRestriction_r

RestrictCount (COUNT bytes) : Encodes the RestrictCount field of the AndRestriction. For more details, see section 2.13.1.1. This value MUST NOT exceed 100,000.

Restricts (variable size): Encodes the Restricts field of the AndRestriction. For more details, see section 2.13.1.

2.13.2 OrRestrictionThe OrRestriction structure describes an OR restriction, which is used to join a group of restrictions using a logical OR operation.

The OrRestriction_r structure, as specified in [MS-NSPI], is an encoding of the OrRestriction data structure, as specified in section 2.13.2.1. The permissible number of restriction structures in the OrRestriction_r data structure exceeds that of the OrRestriction structure. The semantic meaning is otherwise unchanged from the OrRestriction data structure.

92 / 122






2.13.2.1 OrRestriction


RestrictCount (COUNT): This value specifies how many restriction structures are present in Restricts.

Restricts (variable): Array of restriction structures. This field MUST contain RestrictCount structures.

The result of an OrRestriction is TRUE if at least one of its child restrictions evaluates to TRUE, and FALSE if all child restrictions evaluate to FALSE.

2.13.2.2 OrRestriction_r

RestrictCount (COUNT bytes): Encodes the RestrictCount field of the OrRestriction. For more details, see section 2.13.2.1. This value MUST NOT exceed 100,000.

Restricts (variable size): Encodes the Restricts field of the OrRestriction. For more details, see section 2.13.1.

2.13.3 NotRestrictionThe NotRestriction structure describes a NOT restriction, which is used to apply a logical NOT operation to a single restriction.

The NotRestriction_r structure, as specified in [MS-NSPI], is an encoding of the NotRestriction data structure, as specified in section 2.13.3.1. The semantic meaning is unchanged from the NotRestriction data structure.

2.13.3.1 NotRestriction


93 / 122





Restriction (variable): A restriction structure. This value specifies the restriction the logical NOT applies to.

The result of a NotRestriction is TRUE if the child restriction evaluates to FALSE, and FALSE if the child restriction evaluates to TRUE.

2.13.3.2 NotRestriction_r

Restriction (variable size): Encodes the restriction field of the NotRestriction structure. For more details, see section 2.13.3.1.

2.13.4 ContentRestrictionThe ContentRestriction structure describes a content restriction, which is used to limit a table view to only those rows that include a column with contents matching a search string.

The ContentRestriction_r structure, as specified in [MS-NSPI], is an encoding of the ContentRestriction data structure, as specified in section 2.13.4.1. The semantic meaning is unchanged from the ContentRestriction data structure.

2.13.4.1 ContentRestriction


FuzzyLevelLow (2 bytes): Unsigned 16-bit integer. This field specifies the level of precision that the server enforces when checking for a match against a ContentRestriction. The lower 16 bits of the ulFuzzyLevel member apply to both binary and string properties and MUST be set to one of the following values.

FuzzyLevelLow value Description

0x0000FL_FULLSTRING

The value stored in TaggedValue and the value of the column PropertyTag matches in their entirety.

0x0001FL_SUBSTRING

The value stored in TaggedValue matches some portion of the value of the column PropertyTag.

0x0002 The value stored in TaggedValue matches a starting portion of the value of the column PropertyTag.

94 / 122





FuzzyLevelLow value Description

FL_PREFIX

FuzzyLevelHigh (2 bytes): This field applies only to string valued properties and can be set to the following bit values in any combination. FuzzyLevelHigh values can be OR'd together.

FuzzyLevelHigh values Description

0x0001FL_IGNORECASE

The comparison does not consider case.

0x0002FL_IGNORENONSPACE

The comparison ignores Unicode-defined nonspacing characters such as diacritical marks.

0x0004FL_LOOSE

The comparison results in a match whenever possible, ignoring case and nonspacing characters.

PropertyTag (4 bytes): Unsigned 32 bit integer. This value indicates the property tag of the column that whose value MUST be matched against the value specified by the TaggedValue field. The type of this property MUST NOT be multi-valued.

TaggedValue (Variable): A TaggedPropertyValue structure, as specified in section 2.12.4. This structure contains the value to be matched.

The property ID portion of the PropertyTag field in TaggedValue is ignored. Its property type MUST match the property type of PropTag.

The result of a content restriction imposed against a property is undefined when the property does not exist. When a client requires well-defined behavior for such a restriction and is not sure whether the property exists, the client can create an AndRestriction to join the ContentRestriction with an ExistRestriction.

2.13.4.2 ContentRestriction_r

FuzzyLevelLow (2 bytes): Encodes the FuzzyLevelLow field of the ContentRestriction structure. For more details, see section 2.13.4.1.

FuzzyLevelHigh (2 bytes): Encodes the FuzzyLevelHigh field of the ContentRestriction structure. For more details, see section 2.13.4.1.

PropertyTag (4 bytes): Encodes the PropertyTag field of the ContentRestriction structure. For more details, see section 2.13.4.1.

TaggedValue (variable size): Encodes TaggedValue field of the ContentRestriction structure. For more details, see section 2.13.4.1.

95 / 122




2.13.5 PropertyRestrictionThe PropertyRestriction structure describes a property restriction that is used to match a constant with the value of a property.

The PropertyRestriction_r structure, as specified in [MS-NSPI], is an encoding of the PropertyRestriction data structure, as specified in section 2.13.5.1. The semantic meaning is unchanged from the PropertyRestriction data structure.

2.13.5.1 PropertyRestriction


RelOp (1 byte): Unsigned 8-bit integer. The value indicates the relational operator that is used to compare the property on the object with PropValue. The value MUST be one the following.

Relational operatorHexadecimal value Evaluation Alternate name

RelationalOperatorLessThan 0x00 TRUE if the value of object's property is less than the given value

RELOP_LT

RelationalOperatorLessThanOrEqual 0x01 TRUE if the value of the object's property is less than or equal to the given value

RELOP_LE

RelationalOperatorGreaterThan 0x02 TRUE if the value of the object's property value is greater than the given value

RELOP_GT

RelationalOperatorGreaterThanOrEqual

0x03 TRUE if the value of the object's property value is

RELOP_GE

96 / 122






greater than or equal to the given value

RelationalOperatorEqual 0x04 TRUE if the object's property value equals the given value

RELOP_EQ

RelationalOperatorNotEqual 0x05 TRUE if the object's property value does not equal the given value

RELOP_NE

RelationalOperatorMemberOfDL 0x64 TRUE if the value of the object's property is in the DL membership of the specified property value. The value of the object's property MUST be an EntryID of a mail-enabled object in the address book. The specified property value MUST be an EntryID of a distribution list object in the address book.

RELOP_MEMBER_OF_DL

PropTag (4 bytes): Unsigned 32 bit integer. This value indicates the property tag of the property that MUST be compared.

TaggedValue (Variable): TaggedValue structure (see section 2.12.4). This structure describes the property value to be compared against.

97 / 122




The TaggedValue field contains a property tag subfield which is distinct from the PropTag field of this structure. Only the property type portion of the TaggedValue's property tag subfield is used; the property ID is ignored.

Multi-valued properties (when the bit MultivalueFlag is set) are supported for this type of restriction, but the property types (obtained by masking off the bit MultivalueFlag) of both the PropTag field and property tag subfield of TaggedValue subfield MUST be the same in all cases <13>.

The MultivalueInstance bit MUST be set in neither the PropTag field nor the property tag subfield of the TaggedValue.

The following table describes which cases are supported for multi-valued properties.

PropTag TaggedValue Support Details

Single-valued Single-valued All RelOp values are supported

Simple comparison

Single-valued Multi-valued Only RelationalOperatorEqual and RelationalOperatorNotEqual are supported

The value of property PropTag is compared with each value of TaggedValue. If there are any matches, RelationalOperatorEqual is satisfied. If there are no matches, then RelationalOperatorNotEqual is satisfied.

Multi-valued and same as MultivalueInstance column of table

Single-valued All RelOp values are supported

The single instance value of property PropTag on the row is compared with TaggedValue.

Multi-valued and same as MultivalueInstancecolumn of table

Multi-valued Only RelationalOperatorEqual and RelationalOperatorNotEqual supported

The single instance value of property PropTag on the row is compared with each value of TaggedValue. If there are any matches, then RelationalOperatorEqual is satisfied. If there are no matches, then RelationalOperatorNotEqual is satisfied.

Multi-valued but not same as MultivalueInstance of table

Single-valued All RelOp values supported Each value of the property PropTag is compared with TaggedValue. For all RelOp values except RelationalOperatorNotEqual, one successful match means the restriction is satisfied. For RelationalOperatorNotEqual, the restriction is satisfied only when there are no matches

Multi-valued but not Single-valued Not supported

98 / 122




PropTag TaggedValue Support Details

same as MultivalueInstance of table

In the context of a RopFindRow or RopRestrict call, the results are undefined if the property PropTag does not exist on the object being tested. By creating an AndRestriction that joins the property restriction with an ExistRestriction, a caller can be guaranteed accurate results.Only RelationalOperatorEqual and RelationalOperatorNotEqual are allowed for the RelOp field when the base type of PropTag is Boolean.

2.13.5.2 PropertyRestriction_r

Relop (1 byte): Encodes the Relop field of the PropertyRestriction structure. For more details, see section 2.13.5.1.

PropTag (4 bytes): Encodes the PropTag field of the PropertyRestriction structure. For more details, see section 2.13.5.1.

TaggedValue (variable size): Encodes the TaggedValue field of the PropertyRestriction structure. For more details, see section 2.13.5.1.

2.13.6 ComparePropertiesRestrictionThe ComparePropertiesRestriction structure specifies a comparison between the values of two properties using a relational operator.

The ComparePropsRestriction_r structure, as specified in [MS-NSPI], is an encoding of the ComparePropertiesRestriction data structure, as specified in section 2.13.6.1. The semantic meaning is unchanged from the ComparePropertiesRestriction data structure.

2.13.6.1 ComparePropertiesRestriction


RelOp (1 byte): Unsigned 8-bit integer. The value indicates the relational operator used to compare the two properties. The value MUST be one the following.

99 / 122






RelationalOperatorLessThan 0x00 TRUE if the value of object's property is less than the given value

RELOP_LT

RelationalOperatorLessThanOrEqual 0x01 TRUE if the value of the object's property is less than or equal to the given value

RELOP_LE

RelationalOperatorGreaterThan 0x02 TRUE if the value of the object's property value is greater than the given value

RELOP_GT


0x03 TRUE if the value of the object's property value is greater than or equal to the given value

RELOP_GE

RelationalOperatorEqual 0x04 TRUE if the object's property value equals the given value

RELOP_EQ

RelationalOperatorNotEqual 0x05 TRUE if the object's property value does not equal the given value

RELOP_NE

RelationalOperatorMemberOfDL 0x64 TRUE if the value of the object's property is in the DL membershi

RELOP_MEMBER_OF_DL

100 / 122





p of the specified property value. The value of the object's property MUST be an EntryID of a mail-enabled object in the address book. The specified property value MUST be an EntryID of a distribution list object in the address book.

PropTag1 (4 bytes): Unsigned 32 bit integer. This value is the PropertyTag of the first property that MUST be compared.

PropTag2 (4 bytes): Unsigned 32 bit integer. This value is the PropertyTag of the second property that MUST be compared.

The comparison order is (property tag 1) (relational operator) (property tag 2).

The properties to be compared MUST be of the same type.

The result of a compare property value restriction is undefined when one or both of the properties do not exist. When a client requires well-defined behavior for such a restriction and is not sure whether the property exists, for example, it is not a required column of a table, it can create an AndRestriction to join the compare property restriction with an Exists restriction.

The properties specified by PropTag1 and PropTag2 MUST be single-valued.

Only Equal and NotEqual operators are allowed field when the base types of PropTag1 and PropTag2 are Boolean.

2.13.6.2 ComparePropsRestriction_r

101 / 122




Relop: Encodes the Relop field of the ComparePropertiesRestriction structure. For more details, see section 2.13.6.1.

PropTag1: Encodes the PropTag1 field of the ComparePropertiesRestriction structure. For more details, see section 2.13.6.1.

ProptTag2: Encodes the PropTag2 field of the ComparePropertiesRestriction structure. For more details, see section 2.13.6.1.

2.13.7 BitMaskRestrictionThe BitMaskRestriction structure describes a bitmask restriction, which performs a bitwise AND operation and compares the result with zero.

The BitMaskRestriction_r structure, as specified in [MS-NSPI], is an encoding of the BitMaskRestriction data structure, as specified in section 2.13.7.1. The semantic meaning is unchanged from the BitMaskRestriction data structure.

2.13.7.1 BitMaskRestriction


BitmapRelOp (1 byte): Unsigned 8-bit integer. The value specifies how the server MUST perform the masking operation. The value MUST be one of the following:

BMR_EQZ ="0x00"

Perform a bitwise AND operation of the value of Mask with the value of the Property PropTag and test for being equal to zero.

BMR_NEZ ="0x01"

Perform a bitwise AND operation of the value of Mask with the value of the property PropTag and test for NOT being equal to zero.

PropTag (4 bytes): Unsigned 32 bit integer. This value is the PropertyTag of the property to be tested. Its property type MUST be single-valued Int32 (refer to section 2.12.1 for details about individual property types).

Mask (4 bytes): Unsigned 32 bit integer. The bitmask to use for the AND operation.

The BitMaskRestriction structure performs a bitwise AND operation using the bitmask Mask and the value of the property PropTag. If the result is zero, then BMR_EQZ is satisfied. If it's nonzero, that is, if the property value has at least one of the same bits set as Mask, then BMR_NEZ is satisfied.

102 / 122





2.13.7.2 BitMaskRestriction_r

BitmapRelOp (1 byte): Encodes the BitmapRelop field of the BitMaskRestriction structure. For more details, see section 2.13.7.1.

PropTag (4 bytes): Encodes the PropTag field of the BitMaskRestriction structure. For more details, see section 2.13.7.1.

Mask (4 bytes): Encodes the Mask field of the BitMaskRestriction structure. For more details, see section 2.13.7.1.

2.13.8 SizeRestrictionThe SizeRestriction structure describes a size restriction which compares the size (in bytes) of a property value with a given size.

The SizeRestriction_r structure, as specified in [MS-NSPI], is an encoding of the SizeRestriction data structure, as specified in section 2.13.8.1. The semantic meaning is unchanged from the SizeRestriction data structure

2.13.8.1 SizeRestriction


RelOp (1 byte): Unsigned 8-bit integer. The value indicates the relational operator used in the size comparison. The value MUST be one the following.

Relational operatorHexadecimal value Evaluation

Alternate name

RelationalOperatorLessThan 0x00 TRUE, if the value of object's property is less than the given value.

RELOP_LT

RelationalOperatorLessThanOrEqual 0x01 TRUE, if the value of the object's property is less than or equal to the given value.

RELOP_LE

103 / 122





Relational operatorHexadecimal value Evaluation

Alternate name

RelationalOperatorGreaterThan 0x02 TRUE, if the value of the object's property value is greater than the given value.

RELOP_GT


0x03 TRUE, if the value of the object's property value is greater than or equal to the given value.

RELOP_GE

RelationalOperatorEqual 0x04 TRUE, if the object's property value equals the given value.

RELOP_EQ

RelationalOperatorNotEqual 0x05 TRUE, if the object's property value does not equal the given value.

RELOP_NE

PropTag (4 bytes): Unsigned 32 bit integer. This value indicates the property tag of the property, the size of whose value we are testing.

Size (4 bytes): Unsigned 32 bit integer. This value indicates size, as a count of bytes, that is to be used in the comparison.

In the case where PropTag is multivalued, there are two cases. If it was specified as MultivalueInstance column of the table, the size restriction is evaluated for each row using the size of the single instance value of the row. If was not specified as an MultivalueInstance column of the table, the size restriction is evaluated for each multi-value. If one of the size restrictions succeeds, the restriction is satisfied.

2.13.8.2 SizeRestriction_r

Relop (1 byte): Encodes the Relop field of the SizeRestriction structure. For more details, see section 2.13.8.1.

PropTag (4 bytes): Encodes the PropTag field of the SizeRestriction structure. For more details, see section 2.13.8.1.

Size (4 bytes): Encodes the Size field of the SizeRestriction structure. For more details, see section 2.13.8.1.

2.13.9 ExistRestrictionThe ExistRestriction structure tests whether a particular property value exists on a row of the table.

104 / 122




The ExistRestriction_r structure, as specified in [MS-NSPI], is an encoding of the ExistRestriction data structure, as specified in section 2.13.9.1. The semantic meaning is unchanged from the ExistRestriction data structure.

2.13.9.1 ExistRestriction


PropTag (4 bytes): Unsigned 32-bit integer. This value is the PropertyTag of the column to be tested for existence in each row.

The ExistRestriction is used to guarantee meaningful results for other types of restrictions that involve properties, such as property and content restrictions. The result of a restriction that involves a property which does not exist on a row is undefined. By creating an AndRestriction that joins the property restriction with an ExistRestriction, a client can be guaranteed accurate results.

2.13.9.2 ExistRestriction_r

Reserved1 (4 bytes): All clients and servers MUST set this value to "0x00000000".

PropTag (4 bytes): Encodes the PropTag field of the ExistRestriction structures. For more details, see section 2.13.9.1.

Reserved2 (4 bytes): All clients and servers MUST set this value to "0x00000000".

2.13.10 SubObjectRestrictionThe SubObjectRestriction structure applies its subrestriction to a Message object's attachment table or recipients. If ANY row of the subobject satisfies the subrestriction, then the message satisfies the SubObjectRestriction.

The SubRestriction_r structure, as specified in [MS-NSPI], is an encoding of the SubObjectRestriction data structure, as specified in section 2.13.10.1. The semantic meaning is unchanged from the SubObjectRestriction data structure.

105 / 122






2.13.10.1 SubObjectRestriction


Subobject (4 byte): Unsigned 32-bit integer. This value is a PropertyTag that designates the target of the subrestriction restriction. Only two values are supported:

PidTagMessageRecipients

Apply the subrestriction to a message's recipients.

PidTagMessageAttachments

Apply the subrestriction to a message's attachments.

Restriction (variable): A restriction structure. This subrestriction is applied to the rows of the subobject.

2.13.10.2 SubRestriction_r

Subobject (4 bytes): Encodes the subobject field of the SubObjectRestriction structure. For more details, see section 2.13.10.1.

Restriction (variable size): Encodes the restriction field of the SubObjectRestriction structure. For more details, see section 2.13.10.1.

2.13.11 CommentRestrictionThe CommentRestriction structure describes a comment restriction, which is used to annotate a restriction.

106 / 122




RestrictType (1 byte): Unsigned 8-bit integer. This value indicates the type of restriction and MUST be set to "0x0A".

TagggedValuesCount (1 byte): Unsigned 8-bit integer. This value specifies how many TaggedValue structures are present in TaggedValues.

TaggedValues (variable): Array of TaggedPropertyValue (see section 2.12.4) structures. This field MUST contain TaggedValuesCount structures. The TaggedPropertyValue structures MUST NOT include any multi-valued properties.

RestrictionPresent (1 byte): Unsigned 8-bit integer. This field MUST contain either TRUE ("0x01") or FALSE ("0x00"). A TRUE value means that the restriction field is present, while a FALSE value indicates the restriction field is not present.

Restriction (variable): A restriction structure. This field is only present if RestrictionPresent is TRUE.

Clients can use a CommentRestriction structure to save associated comments together with a restriction they pertain to. The comments are formatted as an arbitrary array of TaggedPropValue structures, and servers MUST store and retrieve this information for the client. If the restriction field is present, servers MUST evaluate it; if it is not present, then the CommentRestriction node will effectively evaluate as TRUE. In either case, the comments themselves have no effect on the evaluation of the restriction.

2.13.12 CountRestrictionA CountRestriction structure limits the number of matches that are returned from its subrestriction.

RestrictType (1 byte): Unsigned 8-bit integer. This value indicates the type of restriction and MUST be set to "0x0B".

Count (4 bytes): Unsigned 32-bit integer. This value specifies the limit on the number of matches to be returned when SubRestriction is evaluated.

SubRestriction (variable): A restriction structure. This field specifies the restriction to be limited.

2.14 SortingTable sorting is performed by sending a RopSortTable operation to the server. The sort key is specified using a SortOrderSet structure. The SortOrder structure is part of a SortOrderSet. The format of these two structures is specified in the subsections which follow.

2.14.1 SortOrderThe SortOrder structure describes one column that is part of a sort key for sorting rows of a table. It gives both the column and the direction of the sort.

107 / 122




SortOrder structures are typically combined into a SortOrderSet structure to describe multiple sort keys and directions in a RopSortTable request.

PropertyType (bits 0-15): Identifies the data type of the column to sort on. If the property is multi-valued, for example, the MultivalueFlag bit ("0x1000") is set in the PropertyType, then clients MUST also set the MultivalueInstance bit to "0x2000". In this case the server MUST generate one row for each individual value of a multivalued column, and sort the table by individual values of that column.

PropertyId (bits 16-31): Identifies the column to sort on.

Order (1 byte): MUST be one of the following values.

Order nameOrder value Description

Ascending 0x00 Sort by this column in ascending order.

Descending 0x01 Sort by this column in descending order.

MaximumCategory

0x04 Indicates this is an aggregated column in a categorized sort, whose maximum value (within the group of items with the same value of the previous category) is to be used as the sort key for the entire group.

If the MultivalueFlag bit is set, then the MultivalueInstance bit MUST also be set, and if the MultivalueInstance bit is set, then the MultivalueFlag bit MUST also be set. In other words, it is not possible to sort on all values of a multi-valued column; one row per value MUST be generated and individual values used in the sort.

The MaximumCategory bit causes groups of messages in a categorized sort to be ordered by the maximum value of a column across an entire group. For example, a conversation view is grouped by PidTagConversationTopic; groups are sorted by the group's most recent (maximum) PidTagMessageDeliveryTime value, and within each group messages are sorted by PidTagConversationIndex.

2.14.2 SortOrderSetThe SortOrderSet structure describes a sort key consisting of one or more columns.

SortOrderCount (2 bytes): Unsigned 16-bit integer. This value specifies how many SortOrder structures are present in SortOrders.

108 / 122




CategorizedCount (2 bytes): Unsigned 16-bit integer. This value specifies that the first CategorizedCount columns are categorized. This value MUST be in the range "0" to SortOrderCount.

ExpandedCount (2 bytes): Unsigned 16-bit integer. This value specifies that the first ExpandedCount of the categorized columns start in an expanded state where all of the rows that apply to the category are visible in the table view. This value MUST be in the range "0" to CategorizedCount.

SortOrders (variable): Array of SortOrder structures. This field MUST contain SortOrderCount structures. At most one of the structures can specify a multi-valued property.

109 / 122




3 Structure ExamplesThis section provides two examples of how some of these structures would appear as a stream of bytes.

3.1 Restriction ExampleThe following Restriction, described in high level terms, could be used to search for items with reminders set on them.

A Restriction of the type AndRestrictiofn with the following two sub-clauses:

1. A Restriction of type AndRestriction, with the following eight sub-clauses:

1. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Deleted Items special folder (see [MS-OXOSFLD])

2. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Junk Mail special folder (see [MS-OXOSFLD])

3. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Drafts special folder (see [MS-OXOSFLD])

4. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Outbox special Folder (see [MS-OXOSFLD])

5. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Conflicts special Folder (see [MS-OXOSFLD])

6. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Local Failures special folder (see [MS-OXOSFLD])

7. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Server Failures special folder (see [MS-OXOSFLD])

8. A Restriction of type PropertyRestriction with a relop value of RelationalOperatorNotEqual, comparing the value of PidTagParentEntryId property with the PidTagEntryId of the Sync Issues special folder (see [MS-OXOSFLD])

2. A Restriction of type AndRestriction, with the following three sub-clauses:

1. A Restriction of type NotRestriction, with the following sub-clause:

1. A Restriction of type AndRestriction, with the following two sub-clauses:

2. A Restriction of type ExistRestriction that specifies the PidTagMessageClass property.

3. A Restriction of type ContentRestriction with a FuzzyLevel of FL_PREFIX, comparing the value of PidTagMessageClass property to the string value "IPM.Schedule"

110 / 122




2. A Restriction of type BitMaskRestriction with a BitmapRelOp value of BMR_EQZ that compares the value of the PidTagMessageFlags property to the ULONG value MSGFLAG_SUBMIT

3. A Restriction of type OrRestriction, with the following two sub-clauses:

1. A Restriction of type PropertyRestriction with relop RelationalOperatorEqual, comparing the value of PidLidReminderSet property to the Boolean value "1"

2. A Restriction of type AndRestriction, with the following two sub-clauses:

1. A Restriction of type ExistRestriction that specifies the PidLidRecurring property.

2. A Restriction of type PropertyRestriction with relop RelationalOperatorEqual, comparing the value of PidLidRecurring property to the Boolean value "1".

The following describes how this corresponds to a byte stream that is passed between the client and server.

Before formatting this data structure to send to the server, the client would need to send a RopGetPropertyIdsFromNames request to the server to map the two named properties PidLidReminderSet and PidLidRecurring to actual property IDs.

Bytes Field Meaning

00 RestrictType AndRestriction

02 00 RestrictCount 2



04 RestrictType PropertyRestriction

05 RelOp RelationalOperatorNotEqual

20 10 09 0E PropTag PidTagParentEntryId

0E 02 ByteCount 46

00 00 00 00 EntryID flags MUST be zero

EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01

EntryID Provider UID

UID for Mailbox store

01 00 EntryID Folder Type

eitLTPrivateFolder

(16 byte guid specific to database)

EntryID Store object GUID

UID identifies database where folder was originally created

(6 bytes identifying Deleted Items folder)

EntryID Global Counter

UID identifies specific folder within database

00 00 EntryID Pad MUST be zero


111 / 122




Bytes Field Meaning



0E 02 ByteCount 46

00 00 00 00 EntryID Flags MUST be zero

EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01



01 00 EntryID Folder Type eitLTPrivateFolder




(6 bytes identifying Junk Mail folder)







0E 02 ByteCount 46


EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01




eitLTPrivateFolder




(6 bytes identifying Drafts folder) EntryID Global Counter




05 RelOp RelationalOperatorNotEqual2


0E 02 ByteCount 46


112 / 122




Bytes Field Meaning

EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01




eitLTPrivateFolder




(6 bytes identifying Outbox folder)



00 00 EntryID EntryID Pad

MUST be zero




0E 02 ByteCount 46


EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01



01 00 EntryIDFolder Type

eitLTPrivateFolder




(6 bytes identifying Conflicts folder)







0E 02 Byte Count 46


EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01




eitLTPrivateFolder

113 / 122




Bytes Field Meaning




(6 bytes identifying Local Failures folder)







0E 02 Byte Count 46


EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01




eitLTPrivateFolder




(6 bytes identifying Server Failures folder)







0E 02 Byte Count 46


EE C1 BD 78 61 11 D0 11 91 7B 00 00 00 00 00 01




eitLTPrivateFolder




(6 bytes identifying Sync Issues folder)




114 / 122




Bytes Field Meaning



02 RestrictType NotRestriction



08 RestrictType ExistRestriction

1F 00 1A 00 PropTag PidTagMessageClass

03 RestrictType ContentRestriction

02 00 FuzzyLevelLow FL_PREFIX

00 00 FuzzyLevelHigh

1F 00 1A 00 PropertyTag PidTagMessageClass

49 00 50 00 4D 00 2E 00 53 00 63 00 68 00 65 00 64 00 75 00 6C 00 65 00 00 00

PropValue "IPM.Schedule"

06 RestrictType BitMaskRestriction

00 BitmapRelOp BMR_EQZ

03 00 07 0E PropTag PidTagMessageFlags

04 00 00 00 Mask MSGFLAG_SUBMIT

01 RestrictType OrRestriction



04 RelOp RelationalOperatorEqual

0B 00 + (2 byte mapped prop id)

PropTag PidLidReminderSet

01 PropValue TRUE

115 / 122




Bytes Field Meaning



08 RestrictType ExistRestriction


PropTag PidLidRecurring


04 RelOp RelationalOperatorEqual


PropTag PidLidRecurring

01 PropValue TRUE

3.2 PropertyRow ExampleIn this example, the client sends RopGetPropertiesSpecific to the server requesting the properties from an open Message object:

Hexadecimal value Property ID Property type

0E070003 PidTagMessageFlags PtypInteger32

00370001 PidTagSubject PtypUnspecified

1000001F PidTagBody PtypString

Additional assumptions used in this example:

This message had been sent to this mailbox from a different user.

The message contained an attachment.

The message had been already read by the user but had not been modified.

The subject of this message is "Hello".

The body of the message is so large that the server requires the client to stream the body to the client.

116 / 122




Under these conditions, the PropertyRow data returned from the server would use the FlaggedPropertyRow structure variant (see section 2.12.5) to return the data from RopGetPropertiesSpecific with the following data:

Bytes Field Meaning

01 Flag for PropertyRow There were either errors retrieving values or some values were not returned

00 Flag for FlaggedPropertyValue (see section 2.12.5)

The value for this property is returned

13 00 00 00 PtypInteger32 PropertyValue MSGFLAG_READ|MSGFLAG_UMODIFIED|MSGFLAG_HASATTACH

1F 00 PropertyType for FlaggedPropertyValueWithType (see section 2.12.6)

PtypString

00 Flag for FlaggedPropertyValueWithType PropertyRestriction

48 00 65 00 6C 00 6C 00 6F 00 00 00

String PropertyValue "Hello"

0A Flag for FlaggedPropertyValue The value for this property was not returned. RopOpenStream can be used to obtain the property value.

0E 00 07 80 32-bit SCODE NotEnoughMemory error (see section 2.4)

117 / 122




4 Security ConsiderationsThere are no special security considerations for this protocol over and above those specified in [MS-OXCRPC].

118 / 122




5 Appendix A: Product BehaviorThe information in this specification is applicable to the following product versions:

Microsoft Office Outlook 2003

Microsoft Exchange Server 2003

Microsoft Office Outlook 2007


Microsoft Outlook 2010


Exceptions, if any, are noted below. If a service pack number appears with the product version, behavior changed in that service pack. The new behavior also applies to subsequent service packs of the product unless otherwise specified.

Unless otherwise specified, any statement of optional behavior in this specification prescribed using the terms SHOULD or SHOULD NOT implies product behavior in accordance with the SHOULD or SHOULD NOT prescription. Unless otherwise specified, the term MAY implies that the product does not follow the prescription.

<1> Section 1.5: Exchange 2010 Beta supports public folder referrals, but does not support public folders when client connection services are deployed on an Exchange server that does not also have a mailbox store installed

<2> Section 2.2.1.1: Exchange 2010 Beta can output unexpected results when using RopOpenFolder when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.

<3> Section 2.2.1.2: Exchange 2010 Beta can output unexpected results when using RopOpenMessage when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.

<4> Section 2.2.2: Exchange 2007 does not support the obsolete NNTP newsgroup folder EntryID.

<5> Section 2.2.5.3: Outlook 2003 and Outlook 2007 sometime leave 3 extra bytes not filled at the end of the contact Address EntryID structure; in other words, the sum of all fields specified in this protocol can be 3 bytes less than the count of bytes of the entire EntryID. The value extra 3 bytes has no meaning to either the server or the client.

<6> Section 2.2.5.4: Outlook 2003 and Outlook 2007 sometimes leaves 3 extra bytes not filled at the end of the Personal distribution list EntryID structure; in other words, the sum of all fields specified in this protocol can be 3 bytes less than the count of bytes of the entire EntryID. The value extra 3 bytes has no meaning to either the server or the client.

<7> Section 2.4: Exchange 2010 Beta can output unexpected results for RopAbort when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.

<8> Section 2.4: Exchange 2010 Beta does not support this ROP when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.

119 / 122




<9> Section 2.4.2: Exchange 2010 Beta can output unexpected results when using RopOpenStream when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.



<12> Section 2.9.2: Exchange 2003, Exchange 2007, and Exchange 2010 will sometimes return values larger than 255 bytes or characters.

<13> Section 2.13.5.1: Exchange 2010 Beta does not support multi-valued data types in restrictions when client connection services are deployed on an Exchange server that does not also have a mailbox store installed.

120 / 122




6 Change TrackingThis section will report content and/or editorial changes, beginning with the next release.

121 / 122




7 IndexC

Change tracking

G

Glossary

I

Introduction

N

Normative references

P

Product behavior

R

Referencesnormative

T

Tracking changes

122 / 122




Documents

interoperability.blob.core.windows.netinteroperability.blob.core.windows.net/files/MS-OXCDAT… · Web viewName Word value Field value Description ... control list failed because