· Web viewStrain rate dependent tensile plasticity of ultrafine-grained Cu/Ni laminated composites Materials Science and Engineering a-Structural Materials Properties Microstructure

2013-2017实验室发表论文列表

序号

论文名称

刊物名称

年、卷、期、页或专利号

SCI/EI/国内期刊

论文作者

1

One-step fabrication of sub-10-nm plasmonic nanogaps for reliable SERS sensing of microorganisms

Biosensors & Bioelectronics

2013, 44: 191-197

SCI/EI

J. Chen, G. W. Qin, J. S. Wang, J. Y. Yu, B. Shen, S. Li, Y. P. Ren, L. Zuo, W. Shen, B. Das

2

Flexible free-standing graphene-TiO2 hybrid paper for use as lithium ion battery anode materials

Carbon

2013, 51: 322-326

SCI/EI

T. Hu, X. Sun, H. T. Sun, M. P. Yu, F. Y. Lu, C. S. Liu, J. Lian

3

Composition-dependent ground state of martensite in Ni-Mn-Ga alloys

Acta Materialia

2013, 61(10): 3858-3865

SCI/EI

Z. B. Li, N. Xu, Y. D. Zhang, C. Esling, J. M. Raulot, X. Zhao, L. Zuo

4

Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM

Acta Materialia

2013, 61(16): 6093-6106

SCI/EI

Y. F. Shen, Y. D. Wang, X. P. Liu, X. Sun, R. L. Peng, S. Y. Zhang, L. Zuo, P. K. Liaw

5

In situ high-energy x-ray diffraction studies of deformation-induced phase transformation in Ti-based amorphous alloy composites containing ductile dendrites

Acta Materialia

2013, 61(13): 5008-5017

SCI/EI

J. Mu, Z. W. Zhu, R. Su, Y. D. Wang, H. F. Zhang, Y. Ren

6

Microstructural features and orientation correlations of non-modulated martensite in Ni-Mn-Ga epitaxial thin films

Acta Materialia

2013, 61(18): 6809-6820

SCI/EI

B. Yang, Z. B. Li, Y. D. Zhang, G. W. Qin, C. Esling, O. Perroud, X. Zhao, L. Zuo

7

Simulation of shear banding in heterophase co-deformation: example of plane strain compressed Cu-Ag and Cu-Nb metal matrix composites

Acta Materialia

2013, 61(12): 4591-4606

SCI/EI

N. Jia, F. Roters, P. Eisenlohr, D. Raabe, X. Zhao

8

Greatly enhanced Dy3+ emission via efficient energy transfer in gadolinium aluminate garnet (Gd3Al5O12) stabilized with Lu3+

Journal of Materials Chemistry C

2013, 1(45): 7614-7622

SCI/EI

J. K. Li, J. G. Li, S. H. Liu, X. D. Li, X. D. Sun, Y. Sakka

9

Surface characteristics and electrochemical corrosion behavior of a pre-anodized microarc oxidation coating on titanium alloy

Materials Science & Engineering C-Materials for Biological Applications

2013, 33(7): 3775-3779

SCI/EI

W. F. Cui, L. Jin, L. Zhou

10

Layered rare-earth hydroxide and oxide nanoplates of the Y/Tb/Eu system: phase-controlled processing, structure characterization and color-tunable photoluminescence via selective excitation and efficient energy transfer

Science and Technology of Advanced Materials

2013, 14(1): 015006

SCI/EI

X. L. Wu, J. G. Li, J. K. Li, Q. Zhu, X. D. Li, X. D. Sun, Y. Sakka

11

The development of Ce3+-activated (Gd, Lu)(3)Al5O12 garnet solid solutions as efficient yellow-emitting phosphors


2013, 14(5): 054201

SCI/EI

J. K. Li, J. G. Li, S. H. Liu, X. D. Li, X. D. Sun, Y. Sakka

12

Microstructure and mechanical properties of a three-layer B4C/Al-B4C/TiB2-B4C composite

Materials & Design

2013, 46: 285-290

SCI/EI

X. Y. Yue, J. J. Wang, S. Y. Yu, W. Wang, H. Q. Ru

13

Theoretical understanding of enhanced photoelectrochemical catalytic activity of Sn-doped hematite: anisotropic catalysis and effects of morin transition and Sn doping

Journal of Physical Chemistry C

2013, 117(8): 3779-3784

SCI/EI

X. Y. Meng, G. W. Qin, W. A. Goddard, S. Li, H. J. Pan, X. H. Wen, Y. K. Qin, L. Zuo

14

Synthesis and magnetic properties of Fe2O3-TiO2 nano-composite particles using pulsed laser gas phase evaporation-liquid phase collecting method

Applied Surface Science

2013, 283: 422-429

SCI/EI

S. Y. Chen, Y. K. Zhang, W. L. Han, D. Wellburn, J. Liang, C. S. Liu

15

Dependence on the structure and surface polarity of ZnS photocatalytic activities of water splitting: first-principles calculations

Physical Chemistry Chemical Physics

2013, 15(24): 9531-9539

SCI/EI

X. Y. Meng, H. Xiao, X. H. Wen, W. A. Goddard, S. Li, G. W. Qin

16

Cu2ZnSnS4 thin films: facile and cost-effective preparation by RF-magnetron sputtering and texture control

Journal of Alloys and Compounds

2013, 552: 418-422

SCI/EI

J. S. Wang, S. Li, J. J. Cai, B. Shen, Y. P. Ren, G. W. Qin

17

Electrodeposition of Sn-doped hollow alpha-Fe2O3 nanostructures for photoelectrochemical water splitting


2013, 574: 421-426

SCI/EI

J. J. Cai, S. Li, Z. Li, J. S. Wang, Y. P. Ren, G. W. Qin

18

High permeability and electromagnetic noise suppression characteristics of Fe-B-P sub-micron particle chains and their composites with NiZn-ferrite nanoparticles


2013, 554: 414-418

SCI/EI

C. Yao, Y. Shimada, S. Muroga, G. W. Qin, S. Okamoto, O. Kitakami, Y. Endo, M. Yamaguchi

19

Structure characterization and photoluminescence properties of (Y0.95-xGdxEu0.05)(2)O-3 red phosphors converted from layered rare-earth hydroxide (LRH) nanoflake precursors


2013, 559: 188-195

SCI/EI

X. L. Wu, J. G. Li, D. H. Ping, J. K. Li, Q. Zhu, X. D. Li, X. D. Sun, Y. Sakka

20

Temperature dependence of intersection reactions of epsilon martensite plates in an Fe-30Mn-4Si-2Al TRIP/TWIP steel


2013, 577: S533-S537

SCI/EI

X. Zhang, T. Sawaguchi, K. Ogawa, F. X. Yin, X. Zhao

21

On temperature and strain rate dependent strain localization behavior in Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy

Journal of Materials Science & Technology

2013, 29(3): 273-278

SCI/EI

B. Zhang, L. M. Lei, X. L. Jiang, Z. M. Song, X. Huang, G. P. Zhang

22

Multiple twinning in pure hexagonal close-packed titanium

Journal of Applied Crystallography

2013, 46: 1397-1406

SCI/EI

L. Bao, Y. D. Zhang, C. Schuman, J. S. Lecomte, M. J. Philippe, X. Zhao, C. Esling

23

Effects of cold rolling on microstructure and mechanical properties of Fe-30Mn-3Si-4Al-0.093C TWIP steel

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing

2013, 561: 329-337

SCI/EI

Y. F. Shen, C. H. Qiu, L. Wang, X. Sun, X. M. Zhao, L. Zuo

24

Hot deformation and processing maps of DC cast Al-15%Si alloy


2013, 577: 73-80

SCI/EI

C. X. Wang, F. X. Yu, D. Z. Zhao, X. Zhao, L. Zuo

25

Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae


2013, 583: 1-10

SCI/EI

Y. F. Shen, Y. D. Liu, X. Sun, Y. D. Wang, L. Zuo, R. D. K. Misra

26

In-situ high-energy synchrotron x-ray diffraction study of micromechanical behavior of multiple phases in Ni47Ti44Nb9 shape memory alloy


2013, 560: 458-465

SCI/EI

G. A. Sun, X. L. Wang, Y. D. Wang, W. C. Woo, H. Wang, X. P. Liu, B. Chen, Y. Q. Fu, L. S. Sheng, Y. Ren

27

Interface coherency strain relaxation due to plastic deformation in single crystal Ni-base superalloys


2013, 568: 83-87

SCI/EI

T. K. Liu, G. L. Wu, C. K. Liu, Z. H. Nie, T. Ungar, Y. Ren, Y. D. Wang

28

Low cycle fatigue behavior of the textured AZ31B magnesium alloy under the asymmetrical loading


2013, 560: 618-626

SCI/EI

C. J. Geng, B. L. Wu, X. H. Du, Y. D. Wang, Y. D. Zhang, F. Wagner, C. Esling

29

Microstructures and mechanical properties of a two-layer B4C/Al-B4C/TiB2 composite


2013, 559: 719-724

SCI/EI

X. Y. Yue, J. J. Wang, X. M. Li, L. You, H. Q. Ru

30

On size effects on fatigue properties of metal foils at micrometer scales


2013, 575: 217-222

SCI/EI

C. Y. Dai, B. Zhang, J. Xu, G. P. Zhang

31

Microstructures and mechanical performance of polyelectrolyte/nanocrystalline TiO2 nanolayered composites

Nanoscale Research Letters

2013, 8(1): 44

SCI/EI

B. Zhang, H. F. Tan, J. W. Yan, M. D. Zhang, X. D. Sun, G. P. Zhang

32

Crystal structures and magnetic properties of epitaxial Co-W perpendicular films

Journal of Magnetism and Magnetic Materials

2013, 334: 119-123

SCI/EI

J. J. Wang, Y. Tan, C. M. Liu, O. Kitakami

33

Structural and magnetic properties of L1(0)-FePt/Fe exchange coupled nano-composite thin films with high energy product

Journal of Magnetism and Magnetic Materials

2013, 345: 165-170

SCI/EI

J. S. Wang, B. Yang, W. L. Pei, G. W. Qin, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo

34

Chemical synthesis of faceted alpha-Fe2O3 single-crystalline nanoparticles and their photocatalytic activity

Journal of Materials Science

2013, 48(17): 5744-5749

SCI/EI

S. Li, G. W. Qin, X. Y. Meng, Y. P. Ren, L. Zuo

35

Nanoscaled interface between microgold particles and biphase glass-ceramic matrix

Journal of the American Ceramic Society

2013, 96(11): 3662-3669

SCI/EI

W. Yi, X. Z. Hu, P. Ichim, X. D. Sun

36

Yellow-emitting Y3Si6N11: Ce3+phosphors for white light-emitting diodes (LEDs)


2013, 96(6): 1688-1690

SCI/EI

L. H. Liu, R. J. Xie, W. Y. Li, N. Hirosaki, Y. Yamamoto, X. D. Sun

37

Properties of B4C/Al-B4C composite with a two-layer structure

Materials Research Bulletin

2013, 48(4): 1720-1724

SCI/EI

X. Y. Yue, J. J. Wang, Y. S. Li, H. Q. Ru

38

Microstructure and performances of graphite scattered Cr3C2-NiCr composites prepared by laser processing

Materials Letters

2013, 93: 304-307

SCI/EI

D. Y. Lou, C. L. He, S. Shang, C. S. Liu, Q. K. Cai

39

Processing, microstructures and mechanical properties of biomedical magnesium with a specific two-layer structure

Progress in Natural Science-Materials International

2013, 23: 183-189

SCI/EI

X. Zhang, X.W. Li, J.G. Li, X. D. Sun

40

First-principles investigation of magnetic property and defect formation energy in Ni-Mn-Ga ferromagnetic shape memory alloy

International Journal of Quantum Chemistry

2013, 113(6): 847-851

SCI/EI

J. Bai, N. Xu, J. M. Raulot, C. Esling, X. Zhao, L. Zuo

41

A review of ultrafast laser materials micromachining

Optics and Laser Technology

2013, 46: 88-102

SCI/EI

J. Cheng, C. S. Liu, S. Shang, D. Liu, W. Perrie, G. Dearden, K. Watkins

42

Microstructure of nano-structured ODS CLAM steel by mechanical alloying and hot isostatic pressing

Journal of Nuclear Materials

2013, 442(1-3): S148-S152

SCI/EI

C. Y. Lu, Z. Lu, C. M. Liu

43

Magnetic-field-enhanced carbon solution in proeutectoid ferrite

Journal of Physics D-Applied Physics

2013, 46(38):385002

SCI/EI

X. X. Zhang, N. Xu, S. J. Wang, Y. D. Zhang, J. M. Raulot, C. Esling, X. Zhao, L. Zuo

44

Development of Eu3+ activated monoclinic, perovskite, and garnet compounds in the Gd2O3-Al2O3 phase diagram as efficient red-emitting phosphors

Journal of Solid State Chemistry

2013, 206: 104-112

SCI/EI

J. K. Li, J. G. Li, J. Li, S. H. Liu, X. D. Li, X. D. Sun, Y. Sakka

45

Defect formation energy and magnetic properties of off-stoichiometric Ni-Mn-In alloys by first-principles calculations

Journal of Applied Physics

2013, 113: 174901

SCI/EI

J. Bai, N. Xu, J. M. Raulot, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo

46

A study on the Al doping behavior with sol aging time and its effect on structural and optical properties of sol-gel prepared ZnO thin films

Thin Solid Films

2013, 534: 242-248

SCI/EI

M. B. Shahzad, Y. Qi, H. Lu, X. D. Wang

47

Effect of cyclic pre-deformation on the uniaxial tensile deformation behavior of [017] copper single crystals oriented for critical double slip

Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science

2013, 44A(4): 1631-1635

SCI/EI

X.W. Li, X.M. Wang, W.W. Guo, C.J. Qi, Y. Yan

48

Grain growth in multiple scales of polycrystalline AZ31 magnesium alloy by phase-field simulation


2013, 44A(3): 1599-1610

SCI/EI

Y. Wu, B. Y. Zong, X. G. Zhang, M. T. Wang

49

Texture development in the Ni47Ti44Nb9 shape memory alloy during successive thermomechanical processing and its effect on shape memory and mechanical properties


2013, 44A(2): 978-989

SCI/EI

Y. Yan, W. Jin, X. W. Li

50

Texture evolution in shocked Ni47Ti44Nb9 shape memory alloys

Materials Science and Technology

2013, 29(12): 1499-1502

SCI/EI

H. Liu, G. Sun, Y. Wang, B. Chen, Q. Tian, X. Wang, C. Zhang

51

Effect of stress on microstructures of creep-aged 2524 alloy

Transactions of Nonferrous Metals Society of China

2013, 23(8): 2209-2214

SCI/EI

L. W. Quan, G. Zhao, N. Tian, M. L. Huang

52

Low cycle fatigue behavior of extruded AZ31B magnesium alloy


2013, 23(6): 1589-1594

SCI/EI

C. J. Geng, B. L. Wu, X. H. Du, Y. D. Wang, Y. D. Zhang, E. Claude, W. Francis

53

Effect of size on energy and elastic constants of Ni nanoparticles studied using the embedded-atom method

Modelling and Simulation in Materials Science and Engineering

2013, 21(3): 035010

SCI/EI

J. Cai, Y. D. Wang, Z. W. Huang

54

Processing and properties of SiCp/Fe composites by resistance sintering with a novel dynamic temperature control

Journal of Composite Materials

2013, 47(8): 1001-1010

SCI/EI

W. B. Zhuang, B. Y. Zong, Y. M. Wang, Y. F. Yang

55

Interfacial reaction process of the hot-pressed WC/2024Al composite

Rare Metals

2013, 32(4): 397-401

SCI/EI

C. H. Mao, X. D. Sun, Q. S. Liang, J. Yang, J. Du

56

Effect of magnetic field intensity on abnormal microstructure in Fe-1.1%C alloy

Steel Research International

2013, 84(1): 8-12

SCI/EI

M. L. Gong, H. D. Chen, F. F. Liu, X. Zhao, L. Zuo

57

Wear behavior of cold pressed and sintered Al2O3/TiC/CaF2-Al2O3/TiC laminated ceramic composite

Acta Metallurgica Sinica-English Letters

2013, 26(2): 157-166

SCI/EI

X. F. Yang, J. Cheng, P. L. Song, S. R. Wang, L. Y. Yang, Y. J. Wang, K. Mao

58

Functional carbonaceous compound assisted assembling of SnO2@C nanocomposite as a lithium storage anode material

Science of Advanced Materials

2013, 5(1): 37-45

SCI

M. Zhang, H. Yang, Y. N. Liu, D. F. Xue, X. D. Sun

59

Coarsening behavior of gamma' and gamma aEuro(3) phases in GH4169 superalloy by electric field treatment

International Journal of Minerals Metallurgy and Materials

2013, 20(9): 861-866

SCI/EI

L. Wang, Y. Wang, Y. Liu, X. Song, X. D. Lu, B. J. Zhang

60

Solute atom migration in GH4169 superalloy under electrostatic fields


2013, 20(12): 1176-1182

SCI/EI

Y. Wang, L. Wang, Y. Liu, X. Song, B. J. Zhang, J. H. Du

61

Understanding scale-dependent yield stress of metals at micrometre scales

Philosophical Magazine Letters

2013, 93(9): 531-540

SCI/EI

C. Y. Dai, J. Xu, B. Zhang, G. P. Zhang

62

Formation of nuclei with {111} < 110 > and {111} < 112 > orientations of if steel at early stage of recrystallization using EBSD analysis

Journal of Iron and Steel Research International

2013, 20(9): 61-66

SCI/EI

T. He, Y. D. Liu, W. Sun, L. Zuo

63

In-Situ annealing study of transformation of alpha and gamma texture of interstitial-free steel sheet by high-energy x-ray diffraction

Journal of Iron and Steel Research International

2013, 20(5): 38-41

SCI/EI

Y. D. Liu, Y. D. Zhang, Y. Ren, T. Albert, L. Zuo

64

Experimental and simulation studies of particle size effects on tensile deformation behavior of iron matrix composites

Advanced Composite Materials

2013, 22(5): 299-310

SCI/EI

Y. M. Wang, C. H. Zhang, Y. P. Zong, H. P. Yang

65

Low cycle fatigue behavior under asymmetric loading of two AZ31B magnesium alloys with different microstructures and textures

International Journal of Materials Research

2013, 104(10): 966-973

SCI/EI

C. J. Geng, X. H. Du, B. L. Wu, Y. D. Wang, Y. D. Zhang, C. Esling

66

Effect of strain rate on dynamic deformation behavior of DP780 steel

Acta Metallurgica Sinica

2013, 49(2): 159-166

SCI/EI

D. Y. Dong, Y. Liu, L. Wang, L. J. Su

67

Effect of strain rate on dynamic deformation behavior of laser welded DP780 steel joints


2013, 49(12): 1493-1500

SCI/EI

D. Y. Dong, Y. Liu, L. Wang, Y. L. Yang, J. F. Li, M. M. Jin

68

Effects of pre-fatigue deformation on the uniaxial tensile behavior of coarse-grained pure Al


2013, 49(6): 658-666

SCI/EI

Y. Yan, M. Lu, X. W. Li

69

Investigations on thermal stability of fatigue dislocation structures in a double-slip-oriented Cu single crystal


2013, 49(1): 107-114

SCI/EI

W. W. Guo, C. J. Qi, X. W. Li

70

Microstructure evolution of nanocrystalline AZ31 magnesium alloy by phase field simulation


2013, 49(7): 789-796

SCI/EI

Y. Wu, Y. P. Zong, X. G. Zhang

71

Characterizations of temperature-dependent tensile deformation and fracture features of commercially pure titanium

Materials Transactions

2013, 54(9): 1709-1714

SCI/EI

J. G. Yun, Y. Yan, F. W. Long, X. W. Li

72

Rate-dependences of deformation mechanisms in NiTi shape memory alloys

Acta Physica Sinica

2013, 62(18): 186201

SCI/EI

H. T. Liu, G. A. Sun, Y. D. Wang, B. Chen, X. L. Wang

73

Shock-induced transformation behavior in NiTi shape memory alloy

Acta Physica Sinica

2013, 62(1): 018103

SCI/EI

H. T. Liu, G. A. Sun, Y. D. Wang, B. Chen, X. L. Wang

74

Electromagnetic properties of high-doped ho compounds (La1-x Ho (x) )(2/3)Ca1/3MnO3

Integrated Ferroelectrics

2013, 145(1): 99-107

SCI/EI

N. He, Y. Qi, C. B. Zhang, Q. L. Li

75

Effect of withdrawal rate on microstructure of a hypoeutectic Al-Si alloy by low superheat DC casting

China Foundry

2013, 10(3): 172-175

SCI

D. Z. Zhao, F. Liu, F. X. Yu, T. Hong, L. Zuo

76

Effect of particle size distribution on microstructure and mechanical properties of SiC/B4C composites

Rare Metal Materials and Engineering

2013, 42(1B): 497-500

SCI/EI

C. P. Zhang, H. Q. Ru, X. L. Dai, Y. F. Xu, W. Wang, X. Y. Yue

77

Effects of content and distribution of trace element on texture and property of high-voltage electronic aluminum foil


2013, 42(8): 1552-1557

SCI/EI

X. S. Zhai, L. Wang, Y. Liu, J. He, L. Zuo

78

Evolution of microstructure and mechanical properties of a biomedical beta titanium alloy during cold rolling


2013, 42(10): 2034-2038

SCI/EI

W. F. Cui, L. Jin, Y. Ma, C. M. Liu

79

Role of Nb in 13Cr super-martensitic stainless steel

Rem-Revista Escola De Minas

2013, 66(2): 179-185

SCI/EI

X. P. Ma, C. Zhou, L. J. Wang, C. M. Liu, S. Subramanian, M. P. de Oliveira

80

Effects of heating rate on the phase transformation temperature of austenite in M steel sheet

8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8/8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, August 4, 2013 - August 9, 2013

2013, 1: 835-838

EI

Y.D. Liu, W. Sun

81

Effects of negative gradient magnetic field on the carbon diffusion behavior in pure iron


2013, 1: 839-845

EI

Y. Wu, G. Duan, X. Zhao, L. Zuo

82

Microstructure and properties of nano-structured 9Cr oxide dispersion strengthened steels produced by atomization and hot isostatic pressing


2013, 1: 181-188

EI

R. Xie, Z. Lu, C.M. Liu

83

Synthesis of uniform spherical alumina powders by homogeneous precipitation

Applied Mechanics and Materials/2013 International Conference on Energy Research and Power Engineering, ERPE 2013, May 24, 2013 - May 25, 2013

2013, 341-342: 100-104

EI

X.J. Xu, X. D. Sun, Y.Q. Liang, W. Qiu

84

Isothermal section of Mg-rich corner at 350C in Mg-Zn-Al ternary system

Chinese Journal of Nonferrous Metals

2013, 23(2): 297-302

EI

Y. P. Ren, J.J. Li, S. Li, N. Xiao, S.N. Sun, G. W. Qin

85

Strength and ductility of ultrafine grained 304SS prepared by accumulative rolling and annealing

TMS Annual Meeting/Characterization of Minerals, Metals, and Materials 2013 - TMS 2013 Annual Meeting and Exhibition, March 3, 2013 - March 7, 2013

2013, 45-52

EI

W.Y. Xue, Y.F. Shen, D.F. Liu, Z.Y. Liu, Y.D. Wang

86

Q&P热处理工艺对C-Si-Mn钢组织性能的影响

材料热处理学报

2013, 34(3): 104-107

EI

王建军，焦贵鹏，刘沿东，刘春明

87

强磁场下保温时间对Fe-1.1%C钢中“反常”组织的影响


2013, 34(4): 100-103

EI

宫明龙，刘凤芳，赵骧，左良

88

7150-T7751铝合金厚板性能的不均匀性

材料研究学报

2013, 27(2): 144-148

EI

丛福官，赵刚，田妮，李瑞锋

89

Al2O3/Ti(C,N)-Ni-Ti陶瓷刀具的切削性能

东北大学学报(自然科学版)

2013, 34(2): 214-217

EI

李乾，曹秀娟，修稚萌，孙旭东

90

Fe2O3-TiO2纳米复合颗粒的激光控制合成研究


2013, 34(2): 205-208

EI

陈岁元，张一坤，Daniel W，刘常升

91

LC4表面纳米SiC和PTFE双颗粒复合阳极氧化膜的制备


2013, 34(3): 352-355

EI

陈岁元，王静，梁京，刘常升

92

垂直磁记录薄膜交换耦合作用及开关场分布的测量


2013, 34(2): 218-222

EI

肖娜，李松，任玉平，秦高梧

93

大压下率冷轧无取向硅钢再结晶织构演变


2013, 34(5): 658-662

EI

杨换平，沙玉辉，张芳，左良

94

定向凝固镍基DZ792及DZ792g合金的高温热腐蚀行为


2013, 34(11): 1580-1584

EI

黄烁，王磊，黄炎，李俊涛

95

国产与进口5183焊丝及焊接接头组织与性能


2013, 34(1): 80-84

EI

王东，何长树，王浩，赵骧

96

机械冲击包覆工艺对SiCp/Fe复合材料组织性能的影响


2013, 34(5): 663-668

EI

庄伟彬，宗亚平，张跃波，曹新建

97

微量Ga对电容器阳极用铝箔组织及比电容的影响


2013, 34(10): 1400-1403

EI

左宏，李新芳，刘春明

98

强磁场下冷却速率对Fe-1.1%C合金中“反常”组织的影响

钢铁

2013, 48(4): 55-58

EI

宫明龙，刘凤芳，赵骧，左良

99

多晶纯钛的孪生系统选择准则

科学通报

2013, 58(9): 845-852

EI

宝磊，赵骧

100

Mg-Zn-Al三元系富镁角350℃等温截面

中国有色金属学报

2013, 23(2): 297-302

EI

任玉平，李俊杰，李松，肖娜，孙世能，秦高梧

101

Process optimization and properties of laser cladding high vanadium high speed steel coatings on nodular cast iron

Advanced Materials Research

2013, 712-715: 611-614

EI/ISTP

N. J. Xu, J. B. Lv, T. Sun, C. S. Liu

102

The phase transformation and magnetic properties in Ni-Mn-In alloys

Advanced Materials Research

2013, 712-715: 54-57

EI/ISTP

H.L. Yan, Z. B. Li, C. Y. Zhang, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo

103

Theoretical study on Ni2XIn (X=Mn, Fe and Co)magnetic shape memory alloys by ab initio calculations

Advanced Materials Research/4th International Conference on Manufacturing Science and Engineering, ICMSE 2013, March 30, 2013 - March 31, 2013

2013, 712-715: 288-292

EI/ISTP

J. Bai, J.L. Gu, W.Q. Liu, X. Wang, Y.M. Wang, X. Zhao

104

First-principles investigations on magnetic properties in off-stoichiometric Ni2MnIn magnetic shape memory alloys

Advanced Materials Research/Advanced Engineering Materials Iii, Pts 1-3

2013, 750-752: 730-733

EI/ISTP

J. Bai, J.L. Gu, Y.B. Li, X. Zhao, L. Zuo, J.M. Raulot, C. Esling

105

Effects of rolling temperature on through-thickness deformation and recrystallization textures in heavily rolled silicon steel

Advanced Materials Research/Advances in Chemical, Material and Metallurgical Engineering, Pts 1-5

2013, 634-638: 1729-1733

EI/ISTP

H.P. Yang, F. Zhang, Y.H. Sha, X. Zhu, L. Zuo

106

Effect of single pass hot rolling on goss texture development in twin-roll cast silicon steel strip

Advanced Materials Research/Advances in Manufacturing Science and Engineering, Pts 1-4

2013, 712-715: 78-81

EI/ISTP

C. Sun, Y.H. Sha, F. Zhang, L. Zuo

107

Microstructure and mechanical properties of Al-12.7Si-0.7Mg alloy welded joints using homogeneous welding wire


2013, 712-715: 647-650

EI/ISTP

H. Wang, C.S. He, H.J. Zhang, D. Wang, X. Zhao, L. Zuo

108

Microstructures and mechanical properties of Al-12.7Si-0.7Mg alloy welded joints


2013, 712-715: 623-626

EI/ISTP

D. Wang, C.S. He, Z.Y. Qi, H. Wang, X. Zhao, L. Zuo

109

Process optimization and properties of laser cladding high vanadium high speed steel coatings on nodular cast iron


2013, 712-715: 611-614

EI/ISTP

N.J. Xu, J.B. Lv, T. Sun, C.S. Liu

110

The phase transformation and magnetic properties in Ni-Mn-In alloys


2013, 712-715: 54-57

EI/ISTP

H.L. Yan, Z.B. Li, C.Y. Zhang, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo

111

Effect of Si content on deformation behavior of DC cast Al-Si alloys

Advanced Materials Research/Advances in Materials and Materials Processing, Pts 1-3

2013, 652-654: 1080-1083

EI/ISTP

C.X. Wang, F.X. Yu, D.Z. Zhao, X. Zhao, L. Zuo

112

In situ study of stress-induced martensitic transformation in Ni47Ti44Nb9 shape-memory alloys

Advanced Materials Research/Advances in Materials and Materials Processing, Pts 1-3

2013, 652-654: 1096-1101

EI/ISTP

H.T. Liu, G.G. Sun, Y.D. Wang, B. Chen, X.L. Wang, Q. Tian

113

Cyclic hardening behavior of extruded AZ31B magnesium alloy during low cycle fatigue process

Applied Mechanics and Materials/Advanced Materials and Processes Iii, Pts 1 and 2

2013, 395-396: 234-237

EI/ISTP

G.S. Duan, B.L. Wu, X. Zhao, G. Zhao

114

Synthesis of ultrafine spherical yttrium aluminum garnet powders from yttrium nitrate and aluminum nitrate system

Applied Mechanics and Materials/Advances on Materials Engineering

2013, 377: 151-155

EI/ISTP

X.J. Xu, X. D. Sun, J.G. Li, X.D. Li, D. Huo, S.H. Liu

115

Effects of cold deformation on precipitation in Fe-18Cr-12Mn-0.48N high-nitrogen austenitic stainless steel

Key Engineering Materials/Materials Science and Nanotechnology I

2013, 531-532: 97-102

EI/ISTP

F. Shi, X.W. Li, Y. Qi, C.M. Liu

116

Comparisons of microstructures and hardness distribution between clinocardium californiense and veined rapa whelk shells

Key Engineering Materials/Testing and Evaluation of Inorganic Materials Iii

2013, 544: 295-298

EI/ISTP

H.M. Ji, Y. Jiang, W. Yang, G.P. Zhang, X.W. Li

117

Crystal structure stabilization of gadolinium aluminum garnet (Gd3Al5O12) and photoluminescence properties


2013, 544: 245-251

EI/ISTP

J.K. Li, J.G. Li, X.L. Wu, S.H. Liu, X.D. Li, X. D. Sun

118

Preparation and mechanical properties of a novel biomedical magnesium-based scaffold


2013, 544: 276-280

EI/ISTP


119

Preparation and thermoelectric properties of Ca3Co4O9 ceramics with parallel sheet shaped pores


2013, 544: 355-359

EI/ISTP

H.D. Wang, X. D. Sun, X.Y. Ding, M. Zhang, X.D. Li, J.G. Li, D. Huo, S.H. Liu

120

Comparison of mechanical properties of a biomedical beta titanium alloy added with pure rare earth and rare earth oxides

Materials Science Forum/Advanced Materials Science and Technology

2013, 750: 147-151

EI/ISTP

X. Song, L. Wang, M. Niinomi, M. Nakai, Y. Liu, M.Y. Zhu

121

Thermodynamic description of the gamma ' phase in the Co-Al-W based superalloys

Materials Science Forum/High Performance Structure Materials

2013, 747-748: 654-658

EI/ISTP

S.Y. Yang, M. Jiang, L. Wang

122

Extensions of electron diffraction based techniques in crystallographic characterization

Materials Science Forum/Recrystallization and Grain Growth V

2013, 753: 11-16

EI/ISTP

L. Zuo, Z.B. Li, Y.D. Zhang, C. Esling, X. Zhao

123

Influence of annealing treatment on microstructure and soft magnetic properties of Fe-B-P nanoparticles prepared by aqueous chemical reduction

Hyperfine Interactions

2013, 219(1-3): 101-105

ISTP

Y. H. Zhang, C. Yao, Y. S. Chao, G. W. Qin

124

Structural features and color tunable photoluminescence of the binary and ternary layered rare-earth hydroxides of (Y,Ln)(2) (OH)(5)NO3 center dot nH(2)O (Ln=Tb, Eu)


2013, 544: 252-258

ISTP

X.L. Wu, J.G. Li, J.K. Li, S.H. Liu, X.D. Li, X. D. Sun, Y. Sakka

125

Synthesis of dispersed Y2O3 nanopowder from yttrium stearate


2013, 544: 3-7

ISTP

J.S. Li, X. D. Sun, S.H. Liu, D. Huo, X.D. Li, J.G. Li, Q. Zhu, M. Zhang

126

Al-12.7Si-0.7Mg合金挤压材TTP曲线及其淬火临界速度测定

2013年全国铝加工技术及应用交流会

83.87916667

国内会议

田妮

127

铝合金端淬轴向温度场测定新方法的研究

2013年全国铝加工技术及应用交流会

83.87916667

国内会议

康雷

128

硅和铝含量对快速凝固高硅钢薄带织构的影响

第八届中国功能材料及其应用学术会议

83.87569444

国内会议

柳金龙

129

SPS和HIP法制备的纳米结构ODS钢的微观结构特征

第六届反应堆物理与核材料学术研讨会

83.87569444

国内会议

吕铮

130

COREX-3000预还原竖炉Slot堵塞下还原煤气非均匀流动的CFD数值模拟

第十七届（2013年）全国冶金反应工程学学术会议

83.87916667

国内会议

张丽娟

131

COREX-3000预还原竖内炉煤气停留时间分布的数值模拟

第十七届（2013年）全国冶金反应工程学学术会议

83.87916667

国内会议

周恒

132

纳米镁合金中引入独立大尺寸晶粒的模拟研究

材料科学与工程学报

2013, 31(5): 682-686

国内期刊

吴艳，宗亚平，金剑锋，张宪刚

133

铁基复合材料碳化硅粒子混合尺寸增强作用机理

材料科学与工程学报

2013, 31(1): 1-5

国内期刊

庄伟彬，宗亚平，张跃波，曹新建

134

三维钛网表面双生物陶瓷涂层的制备及其性能

材料科学与工艺

2013, 21(6): 66-71

国内期刊

易伟，牛盾，孙旭东，Hu X Z

135

高振实密度微米级球形银粉的制备

材料与冶金学报

2013, 12(1): 54-57

国内期刊

熊庆丰，张牧，高宇，李晓东，霍地，刘绍宏，李文林，黄富春，孙旭东

136

亚微米级球形银钯合金粉末的制备


2013, 12(2): 124-127

国内期刊

熊庆丰，林智杰，姬爱青，刘绍宏，霍地，孙旭东

137

镧系收缩对(La0.8Ln0.2)2/3Ca1/3MnO3纳米粉体结构和电输运性质的影响

科技导报

2013, 31(9): 18-22

国内期刊

何宁，李庆伦，祁阳，张彩碚

138

铝合金端淬轴向温度场测定新方法的研究

轻合金加工技术

2013, 41(10): 45-49

国内期刊

康雷，赵刚，田妮，刘坤

139

高温环境下Ni47Ti44Nb9形状记忆合金拉伸行为研究

热加工工艺

2013, 42(8): 39-41

国内期刊

刘洪涛，孙光爱

140

Fe-20Mn-3Si-3Al钢在不同变形条件下的力学行为

物理测试

2013, 31(4): 1-6

国内期刊

申勇峰，张荣兴，魏鑫，薛文颖

141

Fe-20Mn-0.6C高锰TRIP/TWIP钢微观组织表征

应用科技

2013, 40(2): 76-80

国内期刊

邱从怀，申勇峰，薛文颖，王沿东

142

Lu2O3和Lu2O3:Eu3+单分散球形粉体合成及其荧光性能研究

中国稀土学报

2013, 31(4): 457-464

国内期刊

马畅，李晓东，董宇，刘绍宏，朱琦，李继光，霍地，孙旭东

143

铕掺杂氧化镧纳米荧光材料的水热合成及性能表征

中国稀土学报

2013, 31(6): 641-647

国内期刊

王雪娇，朱琦，李继光

144

Nb、Ti对铁素体不锈钢铸态及热轧态组织、织构的影响

铸造

2013, 62(10): 944-947

国内期刊

刘沿东，叶晓宁

145

A simple ternary non-ionic templating system for preparation of complex hierarchically meso-mesoporous silicas with 3D-interconnected large mesopores

Journal of Materials Chemistry A

2014, 2(15): 5363-5370

SCI/EI

W. Wang, H. Qi, H. B. Long, X. Y. Wang, H. Q. Ru

146

High temperature and water-based evaporation-induced self-assembly approach for facile and rapid synthesis of nanocrystalline mesoporous TiO2


2014, 2(38): 15912-15920

SCI/EI

W. Wang, D. Nguyen, H. B. Long, G. Q. Liu, S. Li, X. Y. Yue, H. Q. Ru

147

Controlled photocatalytic growth of ag nanocrystals on brookite and rutile and their SERS performance

Acs Applied Materials & Interfaces

2014, 6(1): 236-243

SCI/EI

T. L. Guo, J. G. Li, D. H. Ping, X. D. Sun, Y. Sakka

148

Preparation and characterizations of bioglass ceramic cement/ca-p coating on pure magnesium for biomedical applications


2014, 6(1): 513-525

SCI/EI


149

Porous Fe2O3 nanorods anchored on nitrogen-doped graphenes and ultrathin Al2O3 coating by atomic layer deposition for long-lived lithium ion battery anode

Carbon

2014, 76: 141-147

SCI/EI

T. Hu, M. Xie, J. Zhong, H. T. Sun, X. Sun, S. Scott, S. M. George, C. S. Liu, J. Lian

150

Crystallographic insights into the intermartensitic transformation in Ni-Mn-Ga alloys

Acta Materialia

2014, 74: 9-17

SCI/EI

Z. B. Li, B. Yang, Y. D. Zhang, C. Esling, N. F. Zou, X. Zhao, L. Zuo

151

Strong cube recrystallization texture in silicon steel by twin-roll casting process

Acta Materialia

2014, 76: 106-117

SCI/EI

Y. H. Sha, C. Sun, F. Zhang, D. Patel, X. Chen, S. R. Kalidindi, L. Zuo

152

Texture and microstructure evolution during non-crystallographic shear banding in a plane strain compressed Cu-Ag metal matrix composite

Acta Materialia

2014, 76: 238-251

SCI/EI

N. Jia, D. Raabe, X. Zhao

153

Effect of Cu content on the antibacterial activity of titanium-copper sintered alloys


2014, 35: 392-400

SCI/EI

J. Liu, F. B. Li, C. Liu, H. Y. Wang, B. R. Ren, K. Yang, E. L. Zhang

154

Microstructure, corrosion properties and bio-compatibility of calcium zinc phosphate coating on pure iron for biomedical application


2014, 34: 201-206

SCI/EI

H. Y. Chen, E. L. Zhang, K. Yang

155

Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering


2014, 42: 362-367

SCI/EI


156

Facile and green synthesis of (La0.95Eu0.05)(2)O2S red phosphors with sulfate-ion pillared layered hydroxides as a new type of precursor: controlled hydrothermal processing, phase evolution and photoluminescence


2014, 15(1): 014204

SCI/EI

X. J. Wang, J. G. Li, Q. Zhu, X. D. Li, X. D. Sun, Y. Sakka

157

Tens of micron-sized unilamellar nanosheets of Y/Eu layered rare-earth hydroxide: efficient exfoliation via fast anion exchange and their self-assembly into oriented oxide film with enhanced photoluminescence


2014, 15(1): 014203

SCI/EI

Q. Zhu, J. G. Li, X. D. Li, X. D. Sun, Y. Qi, M. Y. Zhu, Y. Sakka

158

Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr-CrB2


2014, 295: 94-107

SCI/EI

G. F. Sun, Y. K. Zhang, M. K. Zhang, R. Zhou, K. Wang, C. S. Liu, K. Y. Luo

159

Uniform surface modification of diatomaceous earth with amorphous manganese oxide and its adsorption characteristics for lead ions


2014, 317: 724-729

SCI/EI

S. Li, D. Y. Li, F. Su, Y. P. Ren, G. W. Qin

160

Novel stable hard transparent conductors in TiO2-TiC system: design materials from scratch

Scientific Reports

2014, 4: 7503

SCI

X. Y. Meng, D. Y. Liu, X. F. Dai, H. J. Pan, X. H. Wen, L. Zuo, G. W. Qin

161

Hydrogen generation by water splitting on hematite (0001) surfaces: first-principles calculations


2014, 16(46): 25442-25448

SCI/EI

H. J. Pan, X. Y. Meng, G. W. Qin

162

Rapid synthesis of nitrogen-doped graphene for a lithium ion battery anode with excellent rate performance and super-long cyclic stability


2014, 16(3): 1060-1066

SCI/EI

T. Hu, X. Sun, H. T. Sun, G. Q. Xin, D. L. Shao, C. S. Liu, J. Lian

163

Variable beam intensity profile shaping for layer uniformity control in laser hardening applications

International Journal of Heat and Mass Transfer

2014, 79: 189-200

SCI/EI

D. Wellburn, S. Shang, S. Y. Wang, Y. Z. Sun, J. Cheng, J. Liang, C. S. Liu

164

A novel stearate melting method for synthesizing highly reactive YAG nanopowders


2014, 585: 48-53

SCI/EI

J. S. Li, X. D. Sun, S. H. Liu, X. D. Li, D. Huo, J. G. Li, Q. Zhu, M. Zhang, Y. H. Sang, H. Liu

165

Composition dependent phase stability of Ni-Mn-Ga alloys studied by ab initio calculations


2014, 614: 126-130

SCI/EI

N. Xu, J. M. Raulot, Z. B. Li, Y. D. Zhang, J. Bai, W. Peng, X. Y. Meng, X. Zhao, L. Zuo, C. Esling

166

Fabrication and thermoelectric properties of highly textured Ca9Co12O28 ceramic


2014, 582: 294-298

SCI/EI

H. D. Wang, X. D. Sun, X. L. Yan, D. Huo, X. D. Li, J. G. Li, X. Y. Ding

167

Photoluminescent properties of new up-conversion phosphors of Yb/Tm co-doped (Gd(1-x)Lux)(3)Al5O12(x=0.1-0.5) garnet solid solutions


2014, 582: 623-627

SCI/EI

J. K. Li, J. G. Li, J. Li, S. H. Liu, X. D. Li, X. D. Sun, Y. Sakka

168

Synthesis, characterization, and photoluminescent properties of (La0.95Eu0.05)(2)O2SO4 red phosphors with layered hydroxyl sulfate as precursor


2014, 603: 28-34

SCI/EI

X. J. Wang, J. G. Li, Q. Zhu, X. D. Li, X. D. Sun, Y. S. Sakka

169

The effects of citric acid on the synthesis and performance of silver-tin oxide electrical contact materials


2014, 588: 30-35

SCI/EI

Z. J. Lin, S. H. Liu, X. D. Sun, M. Xie, J. G. Li, X. D. Li, Y. T. Chen, J. L. Chen, D. Huo, M. Zhang, Q. Zhu, M. M. Liu

170

The phase equilibria and thermal stability of the long-period stacking ordered phase in the Mg-Cu-Y system


2014, 593: 141-147

SCI/EI

M. Jiang, X. L. Su, H. X. Li, Y. P. Ren, G. W. Qin

171

Synthesis of KIT-6 type mesoporous silicas with tunable pore sizes, wall thickness and particle sizes via the partitioned cooperative self-assembly process

Microporous and Mesoporous Materials

2014, 194: 167-173

SCI/EI

W. Wang, R. Qi, W. J. Shan, X. Y. Wang, Q. L. Jia, J. Zhao, C. P. Zhang, H. Q. Ru

172

Geometrical scale-sensitive fatigue properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloys with alpha/beta lamellar microstructures


2014, 30(12): 1284-1288

SCI/EI

B. Zhang, Z. M. Song, L. M. Lei, L. Kang, G. P. Zhang

173

Influence of shear banding on the formation of brass-type textures in polycrystalline fcc metals with low stacking fault energy


2014, 30(4): 408-416

SCI/EI

H.L. Yan, X. Zhao, N. Jia, Y. R. Zheng, T. He

174

Assembled micro-nano particles with multiple interface polarizations for electromagnetic absorption at gigahertz

Applied Physics Letters

2014, 104(25): 252404

SCI/EI

X. F. Zhang, J. J. Guo, G. W. Qin

175

Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation


2014, 104(4):044101

SCI/EI

Z. B. Li, Y. D. Zhang, C. F. Sanchez-Valdes, J. L. S. Llamazares, C. Esling, X. Zhao, L. Zuo

176

In-situ neutron diffraction study of martensitic variant redistribution in polycrystalline Ni-Mn-Ga alloy under cyclic thermo-mechanical treatment


2014, 105(2):021907

SCI/EI

Z. B. Li, Y. D. Zhang, C. Esling, W. M. Gan, N. F. Zou, X. Zhao, L. Zuo

177

A mechanism-based model for deformation twinning in polycrystalline FCC steel


2014, 607: 206-218

SCI/EI

Y. Y. Wang, X. Sun, Y. D. Wang, X. H. Hu, H. M. Zbib

178

Effect of pre-fatigue deformation on the thickness-dependent tensile behavior of coarse-grained pure aluminum sheets


2014, 600: 99-107

SCI/EI

Y. Yan, M. Lu, W.W. Guo, X.W. Li

179

Microstructure and fatigue behaviors of a biomedical Ti-Nb-Ta-Zr alloy with trace CeO2 additions


2014, 619: 112-118

SCI/EI

X. Song, L. Wang, M. Niinomi, M. Nakai, Y. Liu, M. Y. Zhu

180

Nanostructured extension twins in rapidly compressed Mg-3.0Al-1.0Zn alloy


2014, 614: 75-80

SCI/EI

G. S. Duan, B. L. Wu, X. H. Du, X. Zhao, Y. D. Zhang, L. Zuo, C. Esling

181

Strain rate dependent tensile plasticity of ultrafine-grained Cu/Ni laminated composites


2014, 609: 318-322

SCI/EI

H. F. Tan, B. Zhang, X. M. Luo, X. D. Sun, G. P. Zhang

182

The cyclic frequency sensitivity of low cycle fatigue (LCF) behavior of the AZ31B magnesium alloy


2014, 603: 11-22

SCI/EI

G. S. Duan, B. L. Wu, X. H. Du, X. Zhao, Y. D. Zhang, L. Zuo, C. Esling

183

Silver nanowires with rounded ends: ammonium carbonate-mediated polyol synthesis, shape evolution and growth mechanism

Crystengcomm

2014, 16(2): 244-251

SCI

S. H. Liu, B. M. Sun, J. G. Li, J. L. Chen

184

Hydrothermal synthesis and photoluminescence properties of Gd2O2SO4:Eu3+ spherical phosphor

Powder Technology

2014, 253: 187-192

SCI/EI

J. B. Lian, F. Liu, X. J. Wang, X. D. Sun

185

Effects of precipitated phases on the crack propagation behaviour of a Ni-based superalloy

International Journal of Fatigue

2014, 62: 210-216

SCI/EI

L. Wang, S. Wang, X. Song, Y. Liu, G. H. Xu

186

Investigation on fatigue fracture behaviors of spot welded Q&P980 steel

International Journal of Fatigue

2014, 66: 20-28

SCI/EI

B. Wang, Q. Q. Duan, G. Yao, J. C. Pang, X. W. Li, L. Wang, Z. F. Zhang

187

Fractal analysis of microstructure-related indentation toughness of clinocardium californiense shell

Ceramics International

2014, 40(5): 7627-7631

SCI/EI

H. M. Ji, W. Q. Zhang, X. W. Li

188

Preparation of 3D interconnected macroporous hydroxyapatite scaffolds by PVA assisted foaming method

Ceramics International

2014, 40(1): 1789-1796

SCI/EI

W. Wang, B. S. Chu, C. Q. Lin, S. Chen, H. Q. Ru, X. Y. Yue, Q. L. Jia

189

In situ observations of crack propagation and role of grain boundary microstructure in nickel embrittled by sulfur

Journal of Materials Science

2014, 49(11): 4007-4017

SCI/EI

S. Kobayashi, T. Maruyama, S. Saito, S. Tsurekawa, T. Watanabe

190

Microstructural characteristic and its relation to mechanical properties of clinocardium californiense shell


2014, 97(12): 3991-3998

SCI/EI

H.M. Ji, X.W. Li

191

The role of infiltration temperature in the reaction bonding of boron carbide by silicon infiltration


2014, 97(10): 3286-3293

SCI/EI

C. P. Zhang, H. Q. Ru, W. Wang, X. Y. Yue, J. Zhao

192

Electrospray deposition of a Co3O4 nanoparticles-graphene composite for a binder-free lithium ion battery electrode

Rsc Advances

2014, 4(4): 1521-1525

SCI/EI

T. Hu, G. Q. Xin, H. T. Sun, X. Sun, M. P. Yu, C. S. Liu, J. Lian

193

Fabrication of tunable Au SERS nanostructures by a versatile technique and application in detecting sodium cyclamate

Rsc Advances

2014, 4(43): 22660-22668

SCI/EI

J. Chen, W. Shen, B. Das, Y. Y. Li, G. W. Qin

194

Water-deficient templating system: a general, versatile and efficient synthetic approach for mesoporous silicas

Rsc Advances

2014, 4(5): 2195-2204

SCI/EI

W. Wang, J. Zhao, Y. F. Xu, C. P. Zhang, W. J. Shan, D. Nguyen, H. Q. Ru

195

Laser beam profile modulation for microstructure control in laser cladding of an NiCrBSi alloy

Surface & Coatings Technology

2014, 248: 46-53

SCI/EI

S. Shang, D. Wellburn, Y. Z. Sun, S. Y. Wang, J. Cheng, J. Liang, C. S. Liu

196

The antibacterial properties and biocompatibility of a Ti-Cu sintered alloy for biomedical application

Biomedical Materials

2014, 9(2):025013

SCI/EI

J. Liu, X. X. Zhang, H. Y. Wang, F. B. Li, M. Q. Li, K. Yang, E. L. Zhang

197

Study on the site preference of Ca in superconducting oxides Bi2Sr2-xCaxCuO6+delta (0.1 <= x <= 1.0)

Materials Characterization

2014, 87: 172-178

SCI/EI

B. Z. Sun, S. L. Zhou, H. Wang, Z. Y. Fei, X. M. Lu, T. L. Wang, Y. Qi

198

Metal-decorated Ni7S6 composite microflowers: Synthesis, characterization, and application


2014, 53: 199-204

SCI/EI

F. Cao, R. X. Liu, W. W. Lin, R. P. Deng, L. Zhou, D. P. Liu, S. Y. Song, F. Y. Zhao, H. J. Zhang

199

Synthesis and toughening behavior of bio-inspired nanocrystalline TiO2/polyelectrolyte nanolayered composites


2014, 50: 128-131

SCI/EI

H. F. Tan, B. Zhang, J. W. Yan, X. D. Sun, G. P. Zhang

200

Synthesis and luminescence properties of BiPO4:Ce,Tb nanorods

Journal of Luminescence

2014, 152: 37-39

SCI/EI

X. M. Han, G. Y. Zhang, X. W. Qi, X. Q. Wang, M. Y. Li, X. D. Sun, W. Chen

201

Effect of V on the microstructure and mechanical properties of Mg-10Er-2Cu alloy with a long period stacking ordered structure

Materials Letters

2014, 122: 312-314

SCI/EI

X. H. Du, G. S. Duan, M. Hong, D. P. Wang, B. L. Wu, Y. D. Zhang, C. Esling

202

Strain-gradient dependent fatigue behavior of micron-thick copper single crystal foils

Computational Materials Science

2014, 85: 223-229

SCI/EI

J. Xu, C. Y. Dai, B. Zhang, G. P. Zhang

203

The relation of mechanical properties and local structures in bulk Mg-54(Cu1-xAgx)(35)Y-11 metallic glasses: Ab initio molecular dynamics simulations

Computational Materials Science

2014, 92: 313-317

SCI/EI

H. J. Pan, X. Y. Meng, Q. An, X. H. Wen, G. Qin, W. A. Goddard

204

Effects of intercritical annealing temperature on mechanical properties of Fe-7.9Mn-0.14Si-0.05Al-0.07C steel

Materials

2014, 7(12): 7891-7906

SCI/EI

X. M. Zhao, Y. F. Shen, L. N. Qiu, Y. D. Liu, X. Sun, L. Zuo

205

Effects of mechanical alloying time on microstructure and properties of 9Cr-ODS steels


2014, 455(1-3): 554-560

SCI/EI

R. Xie, Z. Lu, C. Y. Lu, C. M. Liu

206

Microstructure of a 14Cr-ODS ferritic steel before and after helium ion implantation


2014, 455(1-3): 366-370

SCI/EI

C. Y. Lu, Z. Lu, R. Xie, C. M. Liu, L. M. Wang

207

Fabrication and luminescent properties of La2O2S:Eu3+ translucent ceramic by pressureless reaction sintering

Optical Materials

2014, 36(6): 1049-1053

SCI/EI

J. B. Lian, B. X. Wang, P. Liang, F. Liu, X. J. Wang

208

Frequency-dependent failure mechanisms of nanocrystalline gold interconnect lines under general alternating current

Journal of Applied Physics

2014, 116: 103509

SCI/EI

X. M. Luo, B. Zhang, G. P. Zhang

209

Development of strong eta fiber recrystallization texture in rolled Fe81Ga19 thin sheet


2014, 45A(1): 129-133

SCI/EI

Z. H. He, Y. H. Sha, F. Zhang, F. F. Lin, L. Zuo

210

Formation of cube and goss texture after primary recrystallization in electrical steels


2014, 45A(1): 134-138

SCI/EI

J. L. Liu, Y. H. Sha, K. Hu, F. Zhang, L. Zuo

211

Plastic-strain-amplitude dependence of dislocation structures in cyclically deformed aOE (c) 112 >-oriented Cu-7 at. pct Al alloy single crystals


2014, 45A(9): 3835-3843

SCI/EI

X. W. Li, N. Peng, X. M. Wu, Z. G. Wang

212

High strength, low modulus and biocompatible porous Ti-Mo-Fe alloys

Journal of Porous Materials

2014, 21(6): 913-919

SCI/EI

Y. Bao, M. Zhang, Y. Liu, J. J. Yao, Z. M. Xiu, M. Xie, X. D. Sun

213

Effects of surface nanocrystallization on corrosion resistance of beta-type titanium alloy


2014, 24(8): 2529-2535

SCI/EI

L. Jin, W. F. Cui, X. Song, G. Liu, L. Zhou

214

Isothermal section of Mg-rich corner in Mg-Zn-Al ternary system at 335 degrees C


2014, 24(11): 3405-3412

SCI/EI

Y. P. Ren, S. N. Sun, L. Q. Wang, Y. Guo, H. X. Li, S. Li, G. W. Qin

215

Preparation of novel polytetrafluoroethylene/copper-matrix self-lubricating composite materials

Journal of Composite Materials

2014, 48(13): 1561-1574

SCI/EI

S. Y. Chen, D. An, Y. N. Bi, J. Liang, C. S. Liu

216

Texture and magnetic properties of rolled Fe-6.5 wt.%Si thin sheets

Journal of Electronic Materials

2014, 43(1): 121-125

SCI/EI

Y. C. Yao, Y. H. Sha, J. L. Liu, F. Zhang, L. Zuo

217

Thermal oxidation preparation of doped hematite thin films for photoelectrochemical water splitting

International Journal of Photoenergy

2014: 794370

SCI/EI

S. Li, J. J. Cai, Y. D. Mei, Y. P. Ren, G. W. Qin

218

Synthesis of high strength aluminum alloys in the Al-Ni-La system

Journal of Materials Research

2014, 29(5): 708-717

SCI/EI

J. Mu, P. F. Sha, Z. W. Zhu, Y. D. Wang, H. F. Zhang, Z. Q. Hu

219

Fabrication and luminescent properties of YAG:Ce transparent microspheres by laser heating

Ieee Transactions on Nuclear Science

2014, 61(1): 362-366

SCI/EI

Y. Hui, X. D. Sun, J. L. Chen, X. D. Li, D. Huo, S. H. Liu, Q. Zhu, M. Zhang, J. G. Li

220

The fabrication of monoclinic Gd2O3 transparent microspheres and scintillator array via laser heating

Ieee Transactions on Nuclear Science

2014, 61(1): 367-372

SCI/EI

Y. Hui, X. D. Sun, J. L. Chen, X. D. Li, H. Di, S. H. Liu, Q. Zhu, M. Zhang, J. G. Li

221

A Ti/Ti-based-metallic-glass interpenetrating phase composite with remarkable mutual reinforcement effect

Advances in Materials Science and Engineering

2014, 2014: 127172

SCI/EI

J. Mu, Z. W. Zhu, H. F. Zhang, H. W. Zhang, H. M. Fu, H. Li, A. M. Wang, Z. Q. Hu

222

Development of constitutive equation and processing maps for IN706 alloy


2014, 27(2): 198-204

SCI/EI

S. Huang, L. Wang, X. T. Lian, B. J. Zhang, G. P. Zhao

223

Effects of post-weld heat treatment on microstructure and mechanical properties of Al-12.7Si-0.7Mg alloy welded joints by GMAW


2014, 27(2): 245-252

SCI/EI

D. Wang, C. S. He, H. Wang, X. Zhao, L. Zuo

224

Goss texture evolution of grain oriented silicon steel by high-energy x-ray diffraction


2014, 27(3): 530-533

SCI/EI

Y. D. Liu, Q. W. Jiang, Y. D. Wang, Y. Ren, A. Tidu, L. Zuo

225

Heat treatment of centrifugally cast high-vanadium alloy steel for high-pressure grinding roller


2014, 27(3): 430-435

SCI/EI

H. Z. Li, W. P. Tong, J. J. Cui, H. Zhang, L. Q. Chen, L. Zuo

226

Fracture toughness and fracture behavior of SA508-III steel at different temperatures


2014, 21(12): 1187-1195

SCI/EI

J. H. Liu, L. Wang, Y. Liu, X. Song, J. Luo, D. Yuan

227

Hot deformation map and its application of GH4706 alloy


2014, 21(5): 462-468

SCI/EI

S. Huang, L. Wang, X. T. Lian, G. P. Zhao, F. F. Li, X. M. Zhang

228

Processing and properties of bioceramic coatings onto 3D Ti-mesh by dipcasting method

International Journal of Applied Ceramic Technology

2014, 11(6): 1030-1038

SCI/EI

W. Yi, X. Z. Hu, X. D. Sun, P. Ichim, A. Suvorova

229

Characteristics of micro-gold-particle/glass-ceramic composite from post-sintering thermal treatment

Journal of Ceramic Science and Technology

2014, 5(1): 45-50

SCI/EI

W. Yi, X. Sun, D. Niu, X. Hu

230

Effect of stabilisation on precipitation behaviour and mechanical properties of alloy GH4706

Materials Research Innovations

2014, 18: 315-318

SCI/EI

S. Huang, L. Wang, B. J. Zhang, G. P. Zhao

231

Effects of hydrogen on fracture toughness and fracture behaviour of SA508-III steel


2014, 18: 255-259

SCI/EI

J. H. Liu, L. Wang, Y. Liu, X. Song, J. Luo, D. Yuan

232

Influence of electrostatic field treatment on microstructures and mechanical properties of GH4169 superalloy


2014, 18: 276-280

SCI/EI

Y. Wang, L. Wang, J. L. Fei, Y. Liu, J. H. Du, B. J. Zhang

233

Joint softening in heat affected zone during metal inert gas welding of Al-12.7Si-0.7 Mg alloy


2014, 18: 224-227

SCI/EI

D. Wang, C. He, H. Wang, X. Zhao, L. Zuo

234

Optimisation of recrystallisation texture and magnetic properties in Fe-6.5 wt-% Si thin sheets by preannealing method


2014, 18: 615-618

SCI/EI

J. L. Liu, Y. H. Sha, J. Li, Y. C. Yao, F. Zhang, L. Zuo

235

Size controlled preparation of Fe-B-P submicrometre particles and magnetic performance


2014, 18: 634-638

SCI/EI

C. Yao, Y. H. Zhang, J. Chen, D. X. Bao, S. Li, G. W. Qin

236

Study of the defect evolution of the GH4169 superalloy under electrostatic field


2014, 18: 405-409

SCI/EI

Y. Wang, L. Wang, Y. Liu, J. H. Du, B. J. Zhang

237

Tensile deformation and fracture behavior of polycrystalline beryllium at room temperature


2014, 50(9): 1078-1086

SCI/EI

D. M. Xu, G. W. Qin, F. Li, Z. H. Wang, J. M. Zhong, Z. N. Li, L. J. He

238

A new low-cost beta-type high-strength titanium alloy with lower alloying percentage for spring applications

Materials Transactions

2014, 55(9): 1455-1459

SCI/EI

X. L. Zhao, S. C. Sun, L. Wang, Y. D. Liu, J. D. He, G. F. Tu

239

Laser surface alloying of Cr-CrB2 onto a SUS 304 stainless steel substrate

Lasers in Engineering

2014, 27(3-4): 231-245

SCI/EI

M. K. Zhang, G. F. Sun, Y. K. Zhang, C. S. Liu, X. D. Ren, A. X. Feng, W. Zhang

240

Magnetic property enhancement of CO0.85W0.15 magnetic films by addition of vanadium in ru buffer layer


2014, 43(6): 1319-1323

SCI/EI

J. J. Wang, C. Gao, F. Ye, C. M. Liu

241

Relationship between Trace Mn and the pitting behavior of aluminum foil used for high voltage electrolytic capacitors


2014, 43(5): 1031-1036

SCI/EI

H. Zuo, C. M. Liu

242

Surface nanocrystalline characteristics and corrostion resistance of beta-type titanium alloy


2014, 43(S1): 80-84

SCI/EI

L. Jin, W. F. Cui, X. Song, G. Liu, L. Zhou

243

Effect of iron on the sinterability and properties of HA/Ti-Fe composites

Advanced Materials Research/2014 3rd International Conference on Intelligent System and Applied Material, GSAM 2014, January 18, 2014 - January 19, 2014

2014, 898: 271-274

EI

Q. Chang, H.Q. Ru, D.L. Chen, J.L. Yang, H.L. Shen

244

Modeling of TWIP steel tensile behavior with crystal plasticity finite element method

Advanced Materials Research/2014 International Conference on Materials Science and Computational Engineering, ICMSCE 2014, May 20, 2014 - May 21, 2014

2014, 926-930: 162-165

EI

Y.Y. Wang, X. Sun, Y.D. Wang, X.H. Hu, H.M. Zbib

245

Effect of SnO2 particle size on properties of Ag-SnO2 electrical contact materials prepared by the reductive precipitation method

Advanced Materials Research/2014 International Conference on Materials Science and Engineering Technology, MSET 2014, June 28, 2014 - June 29, 2014

2014, 936: 459-463

EI

Z.J. Lin, X. D. Sun, S.H. Liu, J.L. Chen, M. Xie, J. G. Li, X.D. Li, D. Huo, M. Zhang, Q. Zhu

246

Glass forming ability and crystallization kinetics of Al-Mg-Ni-la metallic glasses

Advanced Materials Research/3rd International Conference on Energy and Environmental Protection, ICEEP 2014, April 26, 2014 - April 28, 2014

2014, 960-961: 161-164

EI

J. Mu, H.F. Zhang

247

A new chromate-free insulating coating on silicon steel

Advanced Materials Research/4th International Conference on Advanced Engineering Materials and Technology, AEMT 2014, June 14, 2014 - June 15, 2014

2014, 1004-1005: 757-762

EI

S.H. Wang, Y.F. Long, S.L. Zhao, C.Q. An, K. Ding

248

Identification of crystal structure and crystallographic features of NiMnGa thin films by combination of x-ray diffraction (XRD) and electron backscatter diffraction (EBSD)

Advanced Materials Research/8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013, December 2, 2013 - December 6, 2013

2014, 783-786: 2561-2566

EI

B. Yang, Z.B. Li, Y.D. Zhang, C. Esling, G. W. Qin, X. Zhao, L. Zuo

249

Phases stability of Ni-Mn-Ga alloys studied by ab initio calculations

Advanced Materials Research/8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013, December 2, 2013 - December 6, 2013

2014, 783-786: 1646-1651

EI

N. Xu, J.M. Raulot, Z.B. Li, Y.D. Zhang, J. Bai, W. Peng, X. Zhao, L. Zuo, C. Esling

250

Preparation and wear performance of novel graphite/copper alloy-matrix self-lubricating composite materials

Advanced Materials Research/Materials and Processes Technologies V

2014, 941-944: 284-287

EI

S.Y. Chen, X.R. Li, D. An, J. Liang, C.S. Liu

251

Synthesis of TiOinf2/inf@Ag nano-composite particles using pulsed laser gas phase evaporation-liquid collection

Applied Mechanics and Materials/4th International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2014, August 23, 2014 - August 24, 2014

2014, 670-671: 22-25

EI

S.Y. Chen, J.H. Wang, X. Zhou, J. Liang, C.S. Liu

252

In vitro bioactivity of 3D Ti-mesh with bioceramic coatings in simulated body fluid

Journal of Asian Ceramic Societies

2014, 2(3): 210-214

EI

W. Yi, X. Sun, D. Niu, X. Hu

253

Morphology control of brushite prepared by aqueous solution synthesis

Journal of Asian Ceramic Societies

2014, 2(1): 52-56

EI

T. Toshima, R. Hamai, M. Tafu, Y. Takemura, S. Fujita, T. Chohji, S. Tanda, S. Li, G. W. Qin

254

Sulfate-ion pillared layered hydroxide of Eu2(OH)4SO4nH2O: controlled hydrothermal processing, thermal decomposition, and photoluminescence

Key Engineering Materials/5th Annual Meeting on Testing and Evaluation of Inorganic Materials, TEIM 2014, April 16, 2014 - April 18, 2014

2014, 633: 98-102

EI

X. Wang, J.-G. Li, Q. Zhu, X. Sun

255

The effects of sulfate anion exchange on structural feature and thermal behavior of Y2(OH)5NO3nH2O layered hydroxide nanosheets

Key Engineering Materials/5th Annual Meeting on Testing and Evaluation of Inorganic Materials, TEIM 2014, April 16, 2014 - April 18, 2014

2014, 633: 204-209

EI

W. Liu, X. Wu, Q. Zhu, J.G. Li, X. Sun

256

Preparation and properties of -SiAlON-cBN composites using Y 2O3, B2O3 and Al as additives

Key Engineering Materials/8th International Conference on High-Performance Ceramics, CICC 2013, November 4, 2013 - November 7, 2013

2014, 602-603: 380-383

EI

C. He, X. Shi, X. Yue, J. Wang, H. Ru

257

Synthesis of (La0.95Eu0.05)2O3 red phosphors with hydroxide nanowires as the precursor: template-free hydrothermal processing and photoluminescent properties


2014, 602-603: 1021-1027

EI

X. Wang, J.G. Li, Q. Zhu, X. Sun

258

Ultra-large unilamellar nanosheets efficiently exfoliated from (Y 0.95Eu0.05)2(OH)5NO 3nH2O and their self-assembly into oriented oxide film with enhanced photoluminescence properties


2014, 602-603: 1017-1020

EI

Q. Zhu, J.-G. Li, X. Li, X. Sun

259

Effect of heat treatment on positron annihilation lifetime of an extruded Al-12.7Si-0.7Mg alloy

Materials Science Forum/12th IUMRS International Conference on Advanced Materials, IUMRS-ICAM 2013, September 22, 2013 - September 28, 2013

2014, 788: 258-261

EI

Y.H. Zhang, D. Wang, C.S. He, X.Z. Cao, L. Zhang

260

Effects of strain rate on dynamic strain aging of SA508-III steel


2014, 788: 334-339

EI

D. Yuan, L. Wang, Y. Liu, X. Song, J.H. Liu

261

Fe-based bulk metallic glass with good soft magnetic properties


2014, 789: 59-63

EI

M. Xu, Q.J. Wang

262

Mechanical spectra of an Al-12.7Si-0.7Mg alloy under extrusion and T6 states


2014, 788: 182-186

EI

N. Yu, C.S. He, D. Wang, J.W. Ji, L. Zhang

263

Preparation and evaluation of a novel Al-5.4Si-0.5Mg welding wire


2014, 788: 176-181

EI

H. Wang, C.S. He, D. Wang, X. Zhao, L. Zuo

264

Magnetic properties of off-stoichiometric Ni-X-in (X= Mn, Fe and Co) magnetic shape memory alloys by first-principles calculations

Materials Science Forum/8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013, December 2, 2013 - December 6, 2013

2014, 783-786: 2419-2422

EI

J. Bai, J.M. Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo

265

碳化硼--泡沫铝双层复合材料的制备及其防弹性能

北京科技大学学报

2014, 36(8): 1082-1086

EI

岳新艳，李振楠，郭冠宇，茹红强

266

9Cr-ODS钢雾化合金粉的机械合金化过程


2014, 35(6): 127-131

EI

谢锐，吕铮，卢晨阳，刘春明

267

GH4706合金的动态再结晶与晶粒控制

材料研究学报

2014, 28(5): 362-370

EI

黄烁，王磊，张北江，张文云，赵光普

268

Ni-Fe-Ga磁致形状记忆合金的马氏体相变和晶体结构的研究

材料研究学报

2014, 28(12): 881-886

EI

白静，王新丽，顾江龙，李艳波，赵骧，左良

269

Ru-Cr下底层成分对Co-W磁性薄膜结构和磁性能的影响

材料研究学报

2014, 33(1): 515-520

EI

王建军，高崇，刘春明

270

变形温度对应变强化深冷容器用S30408不锈钢组织结构演化的影响

材料研究学报

2014, 28(9): 682-688

EI

张颖，高晓哲，张滨，宋竹满，郑津洋，张广平

271

Nb-Ni-Ti系低Ti侧三元化合物及其相平衡


2014, 35(7): 964-968

EI

李志超，李洪晓，任玉平，秦高梧

272

低碳马氏体钢的细晶强化机理及其力学性能


2014, 35(4): 499-503

EI

刘沿东，刘顺臻，宋华丁，孔祥伟

273

镀锡溶液中添加剂含量测定的新方法


2014, 35(10): 1432-1436

EI

李兵虎，刘常升，唐钢锋，贾瑜

274

含Mg共晶Al-Si合金铸锭加热过程共晶Si形貌的演变


2014, 35(2): 228-231

EI

赵刚，石翔宇，田妮，左良

275

激光熔覆多层Nb-Si-Ti显微组织


2014, 35(12): 1710-1714

EI

梁京，陈岁元，刘常升，陈炜

276

具有纳米多孔结构的WO3薄膜的制备


2014, 35(2): 232-235

EI

梅宇栋，蔡佳佳，李松，秦高梧

277

纳米结构9Cr-ODS钢的微观结构及对氦泡形成的影响


2014, 35(8): 1133-1136

EI

卢晨阳，吕铮，李云鹏，刘春明

278

尿素低温燃烧法合成Ce0.8Gd0.2O1.9电解质粉末及烧结性能

功能材料

2014, 45(10): 10098-10101

EI

燕萍，张丽清，孙旭东

279

轧制复合法制备硅浓度梯度高硅钢薄带的织构演变

功能材料

2014, 45(21): 21140-21143

EI

柳金龙，沙玉辉，柯云海，张芳，左良

280

粗晶纯铝疲劳位错结构的热稳定性


2014, 24(11): 2718-2726

EI

郭巍巍，齐成军，颜莹，李小武

281

国内外铍及含铍材料的研究进展


2014, 24(5): 1212-1223

EI

许德美，秦高梧，李峰，王战宏，钟景明，何季麟，何力军

282

Effects of long-time aging on fatigue crack propagation behaviors of a hardworking Ni-based superalloy

Advanced Materials Research/11th International Fatigue Congress, Pts 1 and 2

2014, 891-892: 1657-1662

EI/ISTP

L. Wang, Y. Liu, X. Song, G.H. Xu, G.P. Zhao

283

Influence of milling time on morphology and properties of precursor powders for 9Cr oxide dispersion strengthened steel

Advanced Materials Research/Advances in Materials and Materials Processing Iv, Pts 1 and 2

2014, 887-888: 219-222

EI/ISTP

R. Xie, Z. Lu, C.Y. Lu, C.M. Liu

284

Study on macroscopic morphology and microstructure of single Ni60 laser clad tracks prepared using a variable laser beam shaper


2014, 887-888: 1091-1095

EI/ISTP

Y.Z. Sun, S.Y. Wang, D. Wellburn, S. Shang, J. Cheng, S.Y. Chen, B. Zhang, J. Liang, C.S. Liu

285

Temperature field simulation of laser heated 1045 steel using with shaped laser beam profiles


2014, 887-888: 1121-1126

EI/ISTP

S.Y. Wang, Y.Z. Sun, D. Wellburn, S. Shang, J. Cheng, S.Y. Chen, B. Zhang, J. Liang, C.S. Liu

286

Preparation of the carbon fiber/Cu alloy matrix self-lubricating composite materials

Applied Mechanics and Materials/Applied Mechanics, Materials and Manufacturing Iv

2014, 670-671: 164-167

EI/ISTP

S.Y. Chen, X.R. Li, Y.N. Bi, D. Wellburn, J. Liang, C.S. Liu

287

Synthesis of TiO2@Ag nano-composite particles using pulsed laser gas phase evaporation-liquid collection

Applied Mechanics and Materials/Applied Mechanics, Materials and Manufacturing Iv

2014, 670-671: 22-25

EI/ISTP

S.Y. Chen, J.H. Wang, X. Zhou, J. Liang, C.S. Liu

288

Effect of particulate reinforcement electroless plating on properties of SiC/Fe composite

Applied Mechanics and Materials/Mechatronics Engineering, Computing and Information Technology

2014, 556-562: 302-305

EI/ISTP

Y.B. Zhang, B.Y. Zong, J.F. Jin, X.J. Cao

289

Co-precipitation synthesis and photoluminescence properties of Ce 3+ activated terbium aluminum garnet (Tb1-xCe x)3Al5O12 (0x0.05) yellow phosphors


2014, 602-603: 1028-1033

EI/ISTP

J. Bi, J.-G. Li, W. Guan, J. Chen, X. Sun

290

Fabrication of Yb:YAG transparent ceramics using stearate melting derived ultrafine powders

Key Engineering Materials/High-Performance Ceramics Viii

2014, 602-603: 242-247

EI/ISTP

J.S. Li, X. D. Sun, S.H. Liu, D. Huo, X.D. Li, J.G. Li, Q. Zhu, M. Zhang

291

Low-temperature sintering of SiC reticulated porous ceramics using Al2O3-SiO2 as sintering aids


2014, 602-603: 216-220

EI/ISTP

J. Zhao, H.Q. Ru, W. Wang, X.Y. Yue

292

Luminescence behavior of Tm3+ activated GdAlO3 phosphors synthesized using solid-reaction method


2014, 602-603: 32-37

EI/ISTP

N. Wu, X.D. Li, S.H. Liu, Y. Dong, J.G.G. Li, X. D. Sun

293

Luminescence behaviors of the new upconversion phosphors of Yb/Ho Co-doped (Gd1-xLux)(3)Al5O12 (x=0.1-0.5) garnet solid solutions


2014, 602-603: 1034-1038

EI/ISTP

J.K. Li, J.G. Li, S.H. Liu, X.D. Li, X. D. Sun, Y. Sakka

294

Novel direct coagulation casting of alumina suspensions using Y3+-ion releasing substances as coagulant


2014, 602-603: 164-169

EI/ISTP

Y. Dong, X.D. Li, S.H. Liu, J.G. Li, X. D. Sun

295

Preparation and properties of beta-SiAlON-cBN composites using Y2O3, B2O3 and Al as additives


2014, 602-603: 380-383

EI/ISTP

C. He, X.F. Shi, X.Y. Yue, J.J. Wang, H.Q. Ru

296

Properties of B4C-based composite with layered structure


2014, 602-603: 532-535

EI/ISTP

Z.N. Li, S.Y. Fan, X.Y. Yue, Z.B. Sun, J.J. Wang, H.Q. Ru

297

Si/SiC-based layer deposited on boron carbide particles via CVD


2014, 602-603: 270-273

EI/ISTP

Y.F. Xu, H.Q. Ru, X.Y. Yue

298

Surface oxidation behavior of cubic BN powders


2014, 602-603: 544-547

EI/ISTP

X.Y. Yue, Y. Zhang, J.J. Wang, W. Wang, H.Q. Ru

299

Synthesis of (La0.95Eu0.05)(2)O-3 red phosphors with hydroxide nanowires as the precursor: template-free hydrothermal processing and photoluminescent properties


2014, 602-603: 1021-1027

EI/ISTP

X.J. Wang, J.G. Li, Q. Zhu, X. D. Sun

300

Ultra-large unilamellar nanosheets efficiently exfoliated from (Y0.95Eu0.05)(2)(OH)(5)NO3 center dot nH(2)O and their self-assembly into oriented oxide film with enhanced photoluminescence properties


2014, 602-603: 1017-1020

EI/ISTP

Q. Zhu, J.G. Li, X.D. Li, X. D. Sun

301

轨道车辆用A6N01铝合金型材焊接接头的微观组织与性能

2014中国青岛城市轨道交通管理和技术创新研讨会

83.92013889

国内会议

刘建

302

TiB2含量对B4C-SiC-Si-TiB2复合材料力学性能的影响

第十八届全国高技术陶瓷学术年会

83.91805556

国内会议

徐昱峰

303

不同烧结温度下cBN/SiAlON陶瓷复合材料的性能研究


83.91736111

国内会议

岳新艳

304

宏孔-介孔等级双模二氧化硅整体柱的制备


83.91805556

国内会议

王伟

305

基于硫酸氧钛与非离子表面活性剂合成介孔二氧化钛


83.91736111

国内会议

Dong N T

306

利用发泡-冷冻-凝胶法制备三维互联大孔径SiC材料的研究


83.91736111

国内会议

赵菁

307

碳化硅基免烧成耐火砖的制备与性能研究


83.91736111

国内会议

茹红强

308

LC4铝合金表面硬质阳极氧化膜制备及表征

表面技术

2014, 43(4): 37-42

国内期刊

王英才，陈岁元，刘平平

309

脉冲电流对GH4049合金静态再结晶行为的影响

材料科学与工艺

2014, 22(5): 1-5.

国内期刊

高博，王磊，刘杨，贺玉伟，莫桐

310

Al-12.7Si-0.7Mg合金焊接热裂纹倾向性研究


2014, 13(4): 266-271

国内期刊

王东，何长树，王浩，刘建，赵骧，左良

311

β-SiAlON-cBN陶瓷复合材料的制备与性能


2014, 13(4): 288-292

国内期刊

岳新艳，何超，石晓飞

312

β钛合金微弧氧化膜制备及其在人体模拟液中腐蚀性能研究


2014, 13(1): 40-45

国内期刊

金磊，崔文芳，宋秀，周廉

313

镀锡k板板面烧蚀缺陷形成机理研究


2014, 13(2): 103-107

国内期刊

李兵虎，魏军胜，刘常升

314

对称成分Zn-Al合金失稳分解组织的稳定性


2014, 13(1): 51-54

国内期刊

郑毅，石晓东，任玉平

315

国产A6N01铝合金型材MIG焊接头的微观组织与力学性能


2014, 13(3): 181-185

国内期刊

刘建，沈正超，何长树

316

热处理工艺对GH4706合金显微组织与力学性能的影响


2014, 13(3): 177-180

国内期刊

胥国华，黄烁，王磊，张北江，秦鹤勇，赵光普

317

调制比对TiN/Ti多层膜结构和力学性能的影响


2014, 13(4): 276-279

国内期刊

肖娜，杜菲菲，杨波

318

汽车车身用6016铝合金薄板应变硬化指数研究

轻合金加工技术

2014, 42(11): 15-20

国内期刊

孙黎明，田妮，丛福官，王凤春

319

工艺参数对热轧硬质镀锡板晶粒度的影响

热加工工艺

2014, 43(19): 55-57

国内期刊

胡恒法，司雪敏，马路

320

钛合金表面激光制备生物陶瓷梯度涂层研究

应用激光

2014, 34(6): 487-493

国内期刊

陈岁元，吕一格，刘腊梅，尹桂莉，梁京，刘常升

321

插层改性粘土的可加工性能研究

中国陶瓷

2014, 50(6): 60-62

国内期刊

曾雄丰，张文丽，王建省

322

Controllable fabrication of transparent macroporous graphene thin films and versatile applications as a conducting platform

Advanced Functional Materials

2015, 25(27): 4334-4343

SCI/EI

J. H. Sun, M. A. Memon, W. Bai, L. H. Xiao, B. Zhang, Y. D. Jin, Y. Huang, J. X. Geng

323

Foamed single-crystalline anatase nanocrystals exhibiting enhanced photocatalytic activity


2015, 3(34): 17837-17848

SCI/EI

S. H. Liu, W. Wang, J. L. Chen, J. G. Li, X. D. Li, X. D. Sun, Y. Dong

324

Gigahertz dielectric polarization of substitutional single niobium atoms in defective graphitic layers

Physical Review Letters

2015, 115(14): 147601

SCI/EI

X. F. Zhang, J. J. Guo, P. F. Guan, G. W. Qin, S. J. Pennycook

325

Energetics at the surface of photoelectrodes and its influence on the photoelectrochemical properties

Journal of Physical Chemistry Letters

2015, 6(20): 4083-4088

SCI/EI

J. E. Thorne, S. Li, C. Du, G. W. Qin, D. W. Wang

326

Magnetoresistance effect in rubrene-based spin valves at room ternperature


2015, 7(8): 4685-4692

SCI/EI

X. M. Zhang, Q. L. Ma, K. Suzuki, A. Sugihara, G. W. Qin, T. Miyazaki, S. Mizukami

327

Combined flame and solution synthesis of nanoscale tungsten-oxide and zinc/tin-oxide heterostructures

Nanoscale

2015, 7(48): 20510-20520

SCI/EI

Z. Z. Dong, D. Huo, B. H. Kear, S. D. Tse

328

A mechanism of grain growth-assisted intergranular fatigue fracture in electrodeposited nanocrystalline nickel-phosphorus alloy

Acta Materialia

2015, 91: 70-82

SCI/EI

S. Kobayashi, A. Kamata, T. Watanabe

329

Crystal structure determination of incommensurate modulated martensite in Ni-Mn-In Hensler alloys

Acta Materialia

2015, 88: 375-388

SCI/EI

H.L. Yan, Y. D. Zhang, N. Xu, A. Senyshyn, H. G. Brokmeier, C. Esling, X. Zhao, L. Zuo

330

Insight into variant selection of seven-layer modulated martensite in Ni-Mn-Ga thin films grown on MgO(001) substrate

Acta Materialia

2015, 93: 205-217

SCI/EI

B. Yang, Y. D. Zhang, Z. B. Li, G. W. Qin, X. Zhao, C. Esling, L. Zuo

331

Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests

Acta Materialia

2015, 82: 424-436

SCI/EI

S. Y. Wang, Y. D. Zhang, C. Schuman, J. S. Lecomte, X. Zhao, L. Zuo, M. J. Philippe, C. Esling

332

Suppression of twinning and phase transformation in an ultrafine grained 2 GPa strong metastable austenitic steel: Experiment and simulation

Acta Materialia

2015, 97: 305-315

SCI/EI

Y. F. Shen, N. Jia, Y. D. Wang, X. Sun, L. Zuo, D. Raabe

333

Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD

Acta Materialia

2015, 97: 338-347

SCI/EI

X. R. Liu, Y. D. Zhang, B. Beausir, F. Liu, C. Esling, F. X. Yu, X. Zhao, L. Zuo

334

Ultrafine-grained Al-0.2Sc-0.1Zr alloy: The mechanistic contribution of nano-sized precipitates on grain refinement during the novel process of accumulative continuous extrusion

Acta Materialia

2015, 100: 247-255

SCI/EI

Y. F. Shen, R. G. Guan, Z. Y. Zhao, R. D. K. Misra

335

A synergistic combination of diatomaceous earth with Au nanoparticles as a periodically ordered, button-like substrate for SERS analysis of the chemical composition of eccrine sweat in latent fingerprints


2015, 3(19): 4933-4944

SCI/EI

J. Chen, G. W. Qin, Q. Chen, J. Y. Yu, S. Li, F. Cao, B. Yang, Y. P. Ren

336

Fabrication of long-range ordered, broccoli-like SERS arrays and application in detecting endocrine disrupting chemicals


2015, 3(6): 1309-1318

SCI/EI

J. Chen, G. W. Qin, W. Shen, Y. Y. Li, B. Das

Documents

· Web viewStrain rate dependent tensile plasticity of ultrafine-grained Cu/Ni laminated composites Materials Science and Engineering a-Structural Materials Properties Microstructure