Water Solenoids Safety Valves Air

Butterfly Ball Gate Globe Strainers Pressure Gauges Thermometers

Pneumatics Steam Traps Fire Hydrants Boiler Valves Valves

Meters

Water Metering Systems

By combining high quality meters with information

technology solutions and wireless communications,

Elster and Johnson Valves are taking metering to

the next generation. Innovative water metering

solutions extend from utility revenue metering, to

cost allocation, network monitoring, distribution,

industrial and sub-metering applications, from

domestic meters to bulk flow meters.

SmartMeters

The SmartMeter range is based on ‘ no moving

parts electromagnetic technology ’ and are

therefore not affected by mechanical wear. Ideal

where grit, sand or air are an issue. Electromagnetic

water meters are also available for measuring bulk

flows in a wide range of applications including

irrigation.

Oil Meters

The Elster range of fuel oil meters are state of the

art design and have high vibration resistance.

Meters can be mounted on the pressure or suction

side of pumps, no straight inlets or outlets are

required. Elster Meters are suitable for mineral oils

such as heating or propellant fuels in burners.

Gas Meters

Johnson Valves and Elster offers a wide range of

gas meters, comprising volumetric meters

( d iaphragm and rotary meters) , turbine meters

and ultrasonic meters. All meet the highest

standards concerning quality and safety.

Energy metering

Our energy metering offering includes

electromagnetic, ultrasonic and volumetric flow

sensors, integrators, and temperature sensors,

including systems for remote reading and testing.

Our products are used in district heating and cooling

systems, individual boilers, heat pumps, and solar

energy systems.

innovative

metering

solutions

marine

industrial

process

Industrial & Process Valves

Johnson Valves knowledge of many industries

enables us to advise, source and supply valves and

ancillary equipment for almost any application.

Marine Valves

Johnson Valves has over 50 years experience

supplying the marine industry. Our expertise and

extensive stocks of approved valves makes us your

ideal partner for all aspects of fluid control. We have

extensive knowledge of marine systems and are

able to visit ships to survey and assist in the

identification and replacement of valve installations.

Fire Hydrant Valves

Our range of bronze hydrant valves are suitable for

all situations. Available with all of the usual

connectors and manufactured to withstand the

rigours of on and off-shore applications.

Butterfly Valves

Our high quality industrial and marine butterfly

valves are used in many applications. All

configurations and actuation options are available.

The valves hold various industrial and marine

approvals making then suitable in a wide range of

situations.

Repair, Calibration & Certification

In our modern workshop we are able to repair and

recalibrate most commonly used safety relief valves

and pressure gauges. Our test equipment is fully

traceable to a UKAS laboratory and our certificates

are produced within the scope of our ISO 9001

Quality accreditation. Test & approval to standards

such as Lloyds Registry of Shipping are available for

a wide range of valves, many directly from our stock.

Fittings & Tube

Connection types include Push-in, Compression,

Metric & Imperial, BSP & NPT. Pipe & Hose Fittings

are all available in Brass, Stainless steel & Plastic.

Tubing is available in Nylon, Copper, Glass &

Plastic.

industry

expertise

innovation

Solenoid valves

Johnson Valves are one of the UK ’ s leading

distributors of Asco Joucomatic Numatics and carry

a large range of these products suitable for Air,

Gas, Water, Steam, Oil & Cryogenic applications. A

full range of sizes, voltages, pressure ranges & coil

housings, including ATEX certified valves, are

stocked.

Cylinders

Our wide range of actuators includes Compact,

Rodless, Profiled, Barrel & Tie Rod PES type,

Round ISOCLAIR type, Rotary & Linear Slide Units,

along with various mounts, position indicators &

accessories.

Filter Regulators Lubricators

A full range of Filter, Regulator, Lubricators are

held in stock along with many accessories &

spares. Variations are available, such as Breathing

Air Sets, Submicron Units, Coalescent & Carbon

Filters.

Piston Valves

Available in bronze and stainless steel with

threaded, flanged, clamp or butt-weld connections.

The wide variety of operator heads means that this

wide range of valves can control air, water, oil &

steam.

Spool Valves

Available in 3/2 5/2 & 5/3 configurations,

mechanically or solenoid operated and with a

NAMUR Interface to fit direct to pneumatic

actuators if required.

Other Products

Proportional Control Valves, Sentronic Pressure

Regulators, Valve Islands, Dust collection Valves,

Coaxial Solenoid Valves, Poppet Valves and Quick

Exhaust Valves can all be supplied. Johnson

Valves also hold a full range of spare coils & repair

kits

Safety Valves

Johnson Valves stock and source a full range of

safety relief valves that offer a broad spectrum of

protection against over-pressure for vital services

such as steam, air, gases, water and process fluids.

We are able to certify and repair valves to the

relevant BS standards all within the scope of our

ISO 9001 Quality System.

Reducing Valves

Our range of pressure reducing valves offer

comprehensive regulation of pressure systems

using steam, air, hot and cold water, industrial gases

& fluids.

Steam Traps

Johnson Valves stock a wide variety of steam traps

for all applications enabling efficient removal of

condensate to ensure maximum heat transfer. Our

range includes among others, Thermodynamic, Ball

Float, Inverted Bucket and Balance Pressure Steam

Traps.

Pressure Gauges & Thermometers

Our extensive stock of pressure gauges are

available in brass or stainless steel, dry or glycerine

filled and with bottom or back connections.

Thermometers and probes are available in a variety

of design, all suitable for many industrial

applications. Gauges can be calibrated to the

relevant BS standards all within the scope of our

ISO 9001 Quality System.

Sight Glass & Contents Gauges

A variety of tank level indicators and sight glasses

are available. These are suitable for many fluid

types and can be supplied complete with Marine

Approval Certification. Tank Level indicator sets can

be supplied in bespoke sizes to fit all tank types.

Boiler Valves

A complete range of boiler valves are stocked by

Johnson Valves. Whether the application is pressure

relief, pressure reduction, control, crown, blow down

or isolation all are stocked with the suitable

approvals available to be despatched immediately in

order to minimise your boiler ’ s shut down period.

pressure

control

products

t +44 ( 0 ) 23 80669 666

f +44 ( 0 ) 23 80669 606

sales@johnsonvalves.com

www.johnsonvalves.com

Unit 7 Trinity Court

Calmore Ind Estate

Southampton

SO40 3WX

Water Steam Solenoids Safety Valves Air

Butterfly Ball Gate Globe Strainers Pressure Gauges Thermometers

Pneumatics Steam Traps Fire Hydrants Boiler Valves Valves

Meters

GJ Johnson & Sons Limited has been trading for over 50 years and has experience supplying

valves, fittings and related products into the marine, process, manufacturing and water

industries. Johnson Valves aim to be your single supplier for all types of fluid control and

measurement applications.

Our modern warehouse and workshop are ideally positioned to offer a full service, from stock,

for the supply of new and replacement products. Our test and repair facility enables us to

repair and set all types of safety relief valves, test and calibrate pressure gauges and to drill

and prepare valves to suit your pipe work and the requirements of various regulatory

organisations.