Embed Size (px)
NEWproaucts
uration, size, and quantity. Literature,price quotations, and samples areavailable upon request. For moreinformation, e-mail Daniel Lambertat [email protected] orvisit www.anometproducts.com.
Circle 429 on reader service card
HYBRID MEMBRANE FORINDUSTRIAL FILTERSDuPont has announced the globalavailability of its Hybrid MembraneTechnology (HMT) fiber in air filtration bag applications for industrialand commercial manufacturing.
Referred to as "dust collection bags"in the industry, these filtrationproducts are used with exit air tocapture particles so they are notemitted into the environment-anincreasingly important need as morecountries enact regulations forcleaner air. According to the manufacturer, HMT fiber bags provide airflow with an improved cycle timeand better capture of particulates.Initial DuPont data, based on industry testing standards, shows thatHMT technology provides energysavings by reducing down time andproviding more consistent pressurelevels. For more information, visitwww.dupont.com.
Circle 430 on reader service card
BLACK OXIDECORROSION PROTECTIONHigh-strength bolts and critical fasteners take on a protective andattractive black oxide finish whentreated with TRU TEMP low-tempera-
www.metalfinishing.com
ture, non-polluting black oxide fromBirchwood Casey Metal Finishes.The TRU TEMP process forms anon-dimensional, deep black finishwith long-term corrosion resistance-the ideal surface finish forhigh-tension bolts, nuts, and similarfastening devices. The TRU TEMPfinish also prevents galling on critical thread surfaces.
The satin black magnetite coatingis just 0.5 microns thick (20 millionths), with no effect on materialhardness or tensile strength. The finish withstands up to 100-200 hoursofneutral salt spray (ASTM B 117) orseveral hundred hours of humidity(ASTM D 1748), verified by independent testing. This high level ofcorrosion protection is importantfor both part storage and shipmentin corrosive atmospheres, includingocean shipment.
TRU TEMP solutions contain noEPA-regulated chemicals, so there isusually no need for waste treatmentequipment. In most areas, the rinsewaters are sewerable as non-hazardous discharge. This benefit simplifies the installation and minimizesthe capital investment needed to setup a process line. For more information, call (952) 937-7931, visitwww.birchwoodcasey.com, or [email protected].
Circle 431 on reader service card
WASTEWATER TREATMENT SYSTEMWater Maze, a leading manufacturerof industrial wastewater treatmentsystems since 1989, has introducedthe CLPB series, the first wash-water
treatment system to integratemechanical filtration and bioremediation. The revolutionary integrationof these two technologies results intwo significant benefits:1. There is no need for chlorine to
the sanitize the waste stream, sothe CLPB is operationallysafer
and more environmentallyfriendly than other water treatment systems; and
2. The two technologies worktogether to treat emulsified oilsand suspended solids, such asclay or silt, which are consideredoutside the range and capabilityof other wash-water treatmentsystems.The CLPB facilitates the injection
of a Water Maze proprietary BioStax1800 Microbe Solution coordinatedwith a time-sequenced aeration ofbacteria to control odor and createdegradation of total petroleumhydrocarbons (TPH), fuels, benzenes,oils, and grease. The BioStaxmicrobes are certified as gram-positive, pathogen-free, Class 1 organisms, making them extremely safe forhandling. They are also enhanced bythe introduction of a Water MazeBioNutrient solution.
The dominant feature of the CLPBis the high-density, polyethylenetank that is extra-resistant to chemical fatigue and ultraviolet exposure.The CLPB system is fully automatedfor simple operation and low maintenance. Water Maze products aresold in North America through anetwork of associated dealers. Formore information, contact CrismonLewis at (800) 347-6116, ext. 175, orvisit www.wmaze.com.
Circle 432 on reader service card
December 2008 I metalfinishing I59
