AMCA HYDRAULIC CONTROLS Proportional Valves

ANCHOR FLUID POWER Flanges, Couplings and Valves

BARKSDALE Pressure, Temperature, Level Switches,Transducers and Shear Seal Valves

BRAND HYDRAULICS Pressure Controls, Flow Controls and Directional Valves

BUCHER HYDRAULICSHydraulic Power Units (AC/DC), Valves and Accessories

COMER Planetary Drives, Speed Increasers and Reducers, PTO Drive Shafts and Other Mobile Drive Products

CROSS CONTROLElectronic Display and Controllers

CROSS MFG. Pressure Controls, Gear Pumps, Motors, Cylinders, Flow Controls and Valves

DAMAN Manifolds and Custom Manifolds

DELTA POWER HYDRAULICSPower Units, Flow Dividers, Pumps, Motors and Accessories

DURSTGear Drives and Power Transmission Products

HECOPlanetary Gear Reducers and Accessories

LINCOLN Lubricators and Accessories

MAGNALOY Couplings, Pump/Motor Mounts, Reservoirs and Accessories

MICO Hydraulic Components, Controls and Brakes

OEM CONTROLSElectrical Controls

PERMCO Pumps, Motors, Flow Dividers and Parts

POCLAIN HYDRAULICSPumps, Motors and Valves

PRINCEHydraulic Cylinders, Valves, Pumps and Motors

SALAMIDirectional Control Valves, Gear Pumps and Motors

SCHROEDER INDUSTRIES Filtration and Accessories

STAUFF Clamps, Filtration, Gauges, Test Equipment, Valves and Accessories

THERMAL DYNAMICSHeat Exchangers and Accessories

THERMAL TRANSFER Heat Exchangers and Accessories

ZERO-MAX Overhung Load Adaptors

ZINGA INDUSTRIES Filters, Strainers, Sight Gauges and Accessories

*OTHER QUALITY VENDORS

WASHINGTONKent19308 68th Ave S. Kent, WA 98032253-796-1100/800-367-5646Fax: 253-796-1101

Yakima1930 Rudkin Rd. Yakima, WA 98903509-248-0580/800-572-8351Fax: 509-575-0250

OREGONPortland2230 NE Columbia Blvd. Portland, OR 97211503-249-2835/800-257-1002Fax: 503-249-1090

CALIFORNIAFontana11897 Cabernet Dr., Ste. CFontana, CA 92337951-360-5808Fax: 888-295-1881

Modesto1064 Woodland Ave. St. T, Modesto, CA 95351209-549-0800/800-549-2730Fax: 209-549-4760

IDAHOBoise7417 W. Mossy Cup St. Boise, ID 83709208-362-5655/800-784-1394Fax: 208-362-5695

MONTANABillings410 Bernard St. Billings, MT 59101406-248-7431/800-877-1090Fax: 406-248-8586

WYOMINGGillette3201 LeTourneau Dr. Gillette, WY 82718307-682-5858/800-788-5858Fax: 307-687-2040

UTAHSalt Lake City2206 S 2000 West Salt Lake City, UT 84119801-972-8316/800-975-7278Fax: 801-972-8321

AEROQUIP - Adapters, Fittings, Hoses and CrimpersCHAR-LYNN - Low Speed High Torque Motors and Steering Orbitrols. CESSNA - Pumps, Motors and AccessoriesDURAFORCE - High Pressure Pumps, Motors and Valves EATON - Light and Heavy Duty Transmissions, Electronic F(x) ControllersHYDROKRAFT - PumpsINTERNORMAN - Hydraulic & Lubrication Systems, Condition Monitoring Systems, Filters and AccessoriesVICKERS - Pumps, Motors, Power Units, Directional Valves, Manifolds, Filters, Cylinders and accessories.EATON/CUTLER HAMMER - Electrical control products

*Some products are not available at all locations.

APPLICATIONS ENGINEERING*

• Design review• System design• Autodesk AutoCAD Mechanical 2017

& Inventor 2017 • Manifold design capabilities• Electro hydraulic system design and

programming• Onsite custom engineering capabilities

TECHNICAL SUPPORT*

• Extensively trained and high tenured employees to offer breadth of product knowledge.

• EATON Certified Inside Sales staff to ensure proper application of EATON products

• Extensive access to vendor support for all product lines offered.

• Certified Fluid Power Professionals• International Fluid Power Society (IFPS)

REPAIR, SERVICE AND TEST CAPABILITIES*

• Full range of fluid power component repair• Maximum cylinder rod repair capability of

up to 16” diameter• Maximum cylinder bore repair capability of

up to 20” diameter• HVOF (High Velocity Oxy-Fuel) system to

chrome cylinder rods for extended life vs. standard chroming processes

— Reduces corrosion/rust on the surface of the component

— Improves performance of cylindrical metal parts dramatically lengthening component and seal life

— Increases impact resistance — Eliminates carcinogenic chromic acid

solutions during the process• Test stands for variable piston (hydro-static

transmissions) and valve spool leakage• Largest test stand up to 750 horsepower• Flow, pressure, and load test capabilities• Eaton Certified repair facility

*Please contact your field sales representative for local capability

FP-0517-09-10939