WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT · WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT . M. HOT GALVANIZED SILO Material ：hot galvanized sheet（zinc layer 275g/m2） Advantages：

WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT

FE

ED

DE

LIV

ER

Y S

YS

TE

M

HOT GALVANIZED SILO

Material ：hot galvanized sheet（zinc layer 275g/m2）

Advantages：

➢ Standard ladder with protective hoop, safe and reliable.

➢ High intensity and nice sealing effect.

➢ Ring section is designed with water dripping slope, convenient for rain flowing down.

➢ The ring sheet and bottom sheet are designed with observation hole. It is with high intensity, nice

sealing effect and good perceptivity.

➢ All the standard parts are processed with special galvanizing. The rubber washer is endurable for 10

years without aging.

Models and parameters:

No

Coding Capacity

(m³) Legs Silo pcs H h A B C D

Foundation size

（mm）

1 FA09-1 4.4 4 1 4100 1000 1834 1296 410 1590 2500*2500*500

2 FA09-2 6.8 4 2 5000 1000 1834 1296 410 1590 2500*2500*500

3 FA09-3 9.2 4 3 5900 1000 1834 1296 410 1590 2500*2500*500

4 FA02-1 11.7 6 1 4700 1000 2750 1375 680 1970 3600*3600*500

5 FA02-2 16.9 6 2 5600 1000 2750 1375 680 1970 3600*3600*500

6 FA02-3 22.1 6 3 6500 1000 2750 1375 680 1970 3600*3600*500

7 FA04-1 24.5 8 1 5700 1000 3668 1403 940 2790 4200*4200*500

8 FA04-2 33.8 8 2 6600 1000 3668 1403 940 2790 4200*4200*500

9 FA04-3 43.1 8 3 7500 1000 3668 1403 940 2790 4600*4600*500

10 FA04-4 52.4 8 4 8400 1000 3668 1403 940 2790 4900*4900*500

FIBERGLASS SILO


No

Coding

Capacity

(m³)

Legs Silo pcs H h A B Foundation size（mm）

1 FA16 1.9 3 2 3150 1000 1400 1334 2000x2000x500

2 FA17 3.7 3 2 3850 1000 1630 1530 2300x2300x500

3 FA18 7.3 3 2 4850 1000 2080 1914 2700x2700x500

4 FA19 11 3 2 5550 1000 2300 2122 2800x2800x500

5 FA20 14.6 4 2 6450 1000 2300 1734 2800x2800x500

6 FA21 18.2 4 3 6450 1000 2630 1987 3000x3000x500

Advantages：

➢ High rigidity, molded with vacuum assistance.

➢ Nice intensity, the bending and tensile strength

can both reach around 270-300Mpa；

➢ Anti-corrosive, above 20 years’ service life proved by salt spray test.

➢ Nice sealing effect by Swiss sikaflex glue sealing, ultraviolet resistant.

➢ Beautiful appearance, specially processed LOGO，

resistant to color fading.

HOPPER

Material: hot galvanized sheet, zinc layer above 180g/㎡.


No

Capacity

(m³) Capacity

(KG)

Legs H h A B E

Foundation size（mm）

(C*D*H1)

Foundation size（mm）

(C*D*H1)

1 0.3 180 4 1623 640 746 746 2500 2800x1600x1400 1600*1600*1400

2 0.6 360 4 1750 640 1008 1008 2800 2800x1800x1500 1800*1800*1500

3 0.9 600 4 2005 640 1208 1208 3400 3000x2000x1800 2000*2000*1800

4 1.2 800 4 2256 640 1211 1211 3800 3000x2000x2000 2000*2000*2000

5 1.5 1000 4 2446 634 1249 1249 3200 3000x2000x2200 2000*2000*2200

6 2.3 1500 4 2290 530 1554 1504 3500 3200x2300x2000 2300*2300*2000

7 3.1 2000 4 2690 530 1554 1504 4200 3200x2300x2400 2300*2300*2400

8 3.8 2500 4 2990 530 1554 1504 4800 3200x2300x2700 2300*2300*2700

SILO ACCESSORIES

Coding （mm）

DIMENSIONS

DESCRIPTION （kg）

WEIGHT

FB0302100A 460*400*430

2.5 Feed dispenser:

Fiberglass material, hot-dip galvanizing support

Avoid feed blockingping, for all silos.

Coding （mm）

DIMENSIONS


WEIGHT

FB01021000

231*131*159

7.4 FB0102100A

Vibration motor:

Active power 0.4KW, Ingress Protection: IP65

Assisting feed delivering from silo, avoid feed

blocking

Coding （mm）

DIMENSIONS


WEIGHT

FB01020100

φ450*312

φ440*312

7 FB0102010H

Transforming adapter:

Q235 hot-dip galvanizing, zinc layer≥80μm on

average.

Applied with Big Herdsman galvanized silo

Coding （mm）

DIMENSIONS


WEIGHT

FB0102011G φ450*355

2.5

Transforming adapter:

Black PP material

Applied with Big Herdsman galvanized silo

(single auger)

Coding （mm）

DIMENSIONS


WEIGHT

FE02024020 φ450*355

3.3

Feed collecting piece

SS.304 material

Applied for Big Herdsman Silo manual feed

delivery

Coding （mm）

DIMENSIONS


WEIGHT

FE02026000 φ450*355

26

Feed delivery slide shut-off

Q235 hot galv., zinc layer≥80μm on

average

For Big Herdsman silo manual feed

delivery

AUGER FEEDING SYSTEM

This feed loading system delivers feed to feed doser, dry and liquid feeder, feed trough or such

feeding units. One feed sensor is placed at the end of the feed line, which will automatically control the

motor for auto feed control.

This feed line applies to automatic feed delivery for all kinds of pig houses and for pigs at all raising

phases. It can realize automatic feeding at set time and set feeding amount, which saves much labor for

you.

Technological parameters for different models:

Auger feed line models 125 90 75 60

Feed pipe diameter（mm） Φ125 Φ90 Φ75 Φ60

Feed pipe wall thickness（mm） 4.8 4.3 3.6 4.5

Feed pipe material PVC PVC PVC PVC

Motor Voltage(V) 380 380 380 380

Frequency(Hz) 50 50 50 50

Ingress Projection IP54 IP54 IP54 IP54

Power(kw) 1.5 1.5 0.75 1.1 0.75 1.1 1.1

Speed ratio 1：5 1：3 1:5 1：3 1:5 1：3 1:4.2

Output speed (r/min) 290 483 290 483 290 483 345

（kg/h）

Feed delivery capacity（kg/h） 5500 8000 2100 2400 1100 1400 600

Max delivery distance 25 40 60 100

Feed pipe length (mm) 4000 4000 4000 3350

Bent pipe R(mm) 1830 1850 1550 1550

Auger outer diameter（mm） 95 70.5 60.5 42.8

Auger inner diameter（mm） 67 46.5 36.5 26.8

Auger cross section width（mm） 14 12 12 8

Auger cross section thickness（mm） 5.2 4 4 3.85

Auger thread pitch（mm） 66 65 60 40

KEY PARTS

Coding （mm）

DIMENSIONS


WEIGHT

GDCD001000

157*213*497

12.6

GDCE000100 15.2

Driver:

Power: 0.75KW, 1.1KW and 1.5KW

Speed ratio: 1：3, 1：5 and 1：5.7

Shell, input and output flange made of cast

aluminum, fast heat emission, rust-resistant.

Stable and reliable performance. Applied for 60, 75, 125 auger feed line respectively.

GDCF000200

Coding （mm）

DIMENSIONS

DESCRIPTION 重量（kg）

WEIGHT

FB03030000 489*296*352

4.6

FB01030100 547*296*400 4.7

FB0203010A 554*296*400

Slanting single outlet hopper base:

Dimension: 60, 75, 90 and 125. Q235 hot dip galvanizing, zinc layer≥80μm on

average.

For single auger feed line, associated with hot

galvanized transforming adapter.

5.5

FB04040000

Coding （mm）

DIMENSIONS


WEIGHT

FC0103010B 437*208*190

4.4

Coding （mm）

DIMENSIONS


WEIGHT

FB03060100

236*186*388

2.9

FB01060100 2.95

FB02060200 Connecting box:

Connecting box models for 60、75、90 and 125 feed

line respectively. Q235 hot galvanized material, zinc layer≥80μm on

average.

For feed line ending connection with driver.

3

FB04120000

FB02030000 497*208*190

Flat single outlet hopper base:

Dimension: 75 and 90

Hot galvanized sheet, zinc layer≥275g/ ㎡ on

average.

Formed by molding, for single auger feed line,

associated with PP transforming adapter.

4.6

Coding （mm）

DIMENSIONS


WEIGHT

GQAA000020 φ42.8

0.67/m

GQAA000040 φ60.5 0.97/m

GQAA000050 φ70.5 Auger:

Specifications: 60, 75, 90 and 125.

Tempered carbon-manganese steel

Applied for 60PVC pipe.

1.07/m

GQAA000080 φ95 2.21/m

Coding （mm）

DIMENSIONS


WEIGHT

FB03040000 φ80*460

3.4

FB01040100 φ94*467.5 5.8

FB02040100 φ112*469.5

Shaft component:


Q235 galvanized, with bearing, smooth turning and less resistance.

Applied for auger feed line.

9.1

FB04030000

Coding （mm）

DIMENSIONS


WEIGHT

GSGC00011F φ60*2.5*90°

8.6

GSGC00017F φ60*2.5*30° 2.9

GSGC00012F φ76*3*90° 13.1

GSGC00018F φ76*3*30° Bent pipe:

4.4

GSGC00019F φ89*3*90° Specifications60, 75 and 90

Angle: 30° and 90°

Q235 hot galvanized, zinc layer≥80μm on average.

18.4

GSGC00023F φ89*3*30° 6.2

GSGA00058B φ125*4.8*30°

125

PVC 2.4

125 bent pipe:

Wear-resisting PVC pipe, one end flared

Coding （mm）

DIMENSIONS


WEIGHT

GSGA00040A φ60*4.5*3350

3.7

GSGA00008B φ75*3.6*4000 4.5

GSGA00010B φ90*4.3*4000 Feed pipe:

Specifications: 60, 75, 90 and 125

Wear-resisting PVC pipe, one end flared.

6.5

GSGA00059B φ125*4.8*4000

Coding （mm）

DIMENSIONS


WEIGHT

DSAKI02080 φ30

0.05 Feed sensor:

Imported

CHAIN FEEDING SYSTEM

This system is used for pig and poultry powder feed or pellet feed delivery and dozed feeding. The disc

chain moves in the feed pipe, and the feed is pushed forward by the nylon disc in the chain, so that the

feed will be delivered from the silo or manual hopper to each feed drop part along the feed pipe. The

feed will drop down to each feeding unit via feed doser or tee joint.

This feed line can meet restriction feeding, non-restriction feeding, feeding at set time and in set

amount and other different requirements for all kinds of pigs.

Main technological parameters:

Pig pan feed line diameter 60

Motor

Voltage(V) 380

Frequency(Hz) 50

Ingress Protection IP54

power(kw) 1.5

speed ratio 31.43

Output speed (r/min) 46

Feed delivery capacity (kg/h) 1500

Maximum horizontal delivery

distance

360 (including 12 corners）

Feed pipe diameter (mm) Φ60 φ60

Feed pipe wall thickness (mm) 1.5 4.5

Feed pipe material PVC

Hot galvanized PVC

Feed pipe length (mm)

6000/unit 3350/unit

KEY PARTS

Coding DIMENSIONS DESCRIPTION （kg）

WEIGHT

FE0201100J 1110x340x430

57.7

DRIVE UNIT. STAINLESS STEEL Ø 60:

Imported, motor with aluminum alloy shell, nice heat

emission performance and rust-resistant. Driving box made of SS. 430, rust-resistant.

Transparent cover, convenient to observe inside

operation and feed delivery condition.

Coding （mm）

DIMENSIONS


WEIGHT

FE0205010C φ43*70

0.58/m

FE0205010C φ42*70

60 disc chain:

The chain is directly welded with 20Mn2, breaking force above 1.8 tons.

Disc adopts nylon 66 material, high intensity and

wear-resisting.

Disc interval 70mm. Applied for 60 pan feed line.

0.57/m

Coding （mm）

DIMENSIONS


WEIGHT

FE02013020 φ58*8 0.01

FE0201302A φ58*8

Feed pipe cleaning pan:

Specifications: 58mm and 53mm, applied for

galvanized pipe and PVC pipe of pan feed line. Tear-resisting PU (polyurethane) material

For cleaning the feed left in corner and feed pipe.

Coding

（mm）

DIMENSIONS DESCRIPTION

（kg）

WEIGHT

FE0201500A 1300*740*375

8 Driving box rain cover:

Fiberglass material, integral molded,

beautiful and long lasting

Coding （mm）

DIMENSIONS


WEIGHT

FE02021010 545*297*400

9.1

FE02021030 545*368*400

Adjusting box:

Single/ double outlet, two options for single

and double pan feed line respectively. SS

430 shell, nice rust-resistant performance.

Designed with vibration protecting mesh,

preventing foreign objects getting in and

avoid feed blocking.

Transparent view window for feed

observation.

Applied for single silo and single pan feed

line.

13.6

Coding （mm）

DIMENSIONS


WEIGHT

FE02021060 543*496*381

18

Feed return preventing hopper base:

SS 430 shell, nice rust resisting

performance.

Transparent view window for feed

observation.

Separate auger delivers feed for pan feed

line, completely avoid feed return via

gang control.

Coding （mm）

DIMENSIONS


WEIGHT

FE0204000B 354*354*63

5

FE0204000C 354*354*63

60 corner

SS 304 and hot galvanized material for your

option All standard parts made of SS material.

Capable of dismantling without tools.

6

Coding （mm）

DIMENSIONS


WEIGHT

FB03050000 φ60*1.5*6000

13

GSGA00040A φ60*4.5*3350

60 feed pipe:

Galvanized and PVC pipe for your option, with flared end.

The pipe is rolled by hot galvanized sheet, zinc layer ≥275g/㎡.

PVC pipe adopts tear-resisting PVC material.

3.7

Coding （mm）

DIMENSIONS


WEIGHT

GSGA00055B φ60*2.0*500

0.26 60 transparent tube

Transparent PC material

Nice transparency, high intensity.

For feed sensor installation or other position that need to observe the feed position.

Coding （mm）

DIMENSIONS


WEIGHT

FB03080000 440*181*548

6.4

Feed line medicator:

SS 304 shell

For adding vitamin, medicine or other feed additives

(powder), max medicine adding speed is 10kg/h. Associated with 60 pan feed line or auger feed line.

Coding （mm）

DIMENSIONS


WEIGHT

DSAKI02080 φ30

0.05 Feed sensor Imported

ACCESSORIES

Coding （mm）

DIMENSIONS


WEIGHT

FE02053000 φ60*200

0.37 Feed pipe cover:

Rolled by hot galvanized sheet, zinc layer ≥275g/㎡

For 60 feed pipe connection

Coding （mm）

DIMENSIONS


WEIGHT

FE02051000 90*88*15

0.15

FB01050200 113.5*114*20 0.24 Main feed pipe clamp:


Q235A material, dacromet surface.

For 60 feed pipe connection. FB0105020A 131*133.5*20 0.29

Coding （mm）

DIMENSIONS


WEIGHT

FB01090500

+

FE02033070

115*91*76

0.23

FE02033030

+

FE02033070

122*103*76

Feed drop pipe clamp:

Specifications: 60 and 75

Q235 material, dacromet surface.

Associated with clamp lock piece, used for feed pipe

and 3/4” tube fixation.

0.24

Coding （mm）

DIMENSIONS


WEIGHT

WZ0100080A 90*80*71

0.24

WZ01000800 100*80*75 0.25

WZ01000600 80*77*66 Double U clamp:

4 models: for 1” tube and 1/2” tube fixation, 1” tube

and 3/4” tube fixation, 3/4” tube and 1/2” tube

fixation, and 3/4” tube and 3/4” tube fixation

respectively.

Q235A material, dacromet surface.

For tube cross fixation.

0.23

WZ0100060A 90*77*70 0.24

Coding （mm）

DIMENSIONS


WEIGHT

GSGA00035A φ63*2.2

0.5

GSGA00034A φ75*2.2

PVC tube:

For feed drop from tee, associated with 75 pipe, feed

drop amount adjustable. 0.6

Coding （mm）

DIMENSIONS


WEIGHT

FE02032010 φ136*412

0.24

FE0203203A φ70*79 0.04 Feed collecting funnel kit:

PP material, components are funnel and connecting piece.

There are two models of connecting piece, 60 and 75

Used for feed drop between feed dozer and feed drop

pipe, height adjustable.

FE02032020 φ86*79 0.05

Coding （mm）

DIMENSIONS


WEIGHT

FE02032050 500*80*670

1 Double outlet feed drop pipe:

Semi-transparent PE material, top inlet ID=φ76mm

Applied for branch feed drop.

Coding （mm）

DIMENSIONS


WEIGHT

FE0203315X φ60*2

2.84/m FE0203316X φ60*2 Feed drop pipe: Three models: bent, slant ending, flat ending

Q235 hot galv., zinc layer no less than 80μm.

For feed drop from feed dozer FE0203317X φ60*2

Coding

（mm）

DIMENSIONS


WEIGHT

FB03091000 420*420*320

4.8/5.0

Transit hopper:

SS 430 material

Transparent view window for feed observation

Applied for 60/75 feed line relay or transition

Coding （mm）

DIMENSIONS


WEIGHT

FB01070700 373*210*117

3.1

FB03070300 373*210*108

Double outlet feed drop hopper:

60 and 75 two models

SS 430 material

Associated with transit hopper, realizing two main feed line turned into one sub feed line.

2.8

Coding （mm）

DIMENSIONS


WEIGHT

FC0607000B 222*126*225

5.7

Euro winch:

Q235 color zinc plating

Speed ratio 1:5, load bearing≤400kg

For dozer feed line lifting

Coding （mm）

DIMENSIONS


WEIGHT

FE02061910 326*163*81

2.4 Electric push bar:

Imported, 24V, pull force 4000N, stroke 150mm, Ingress Protection IPX6

For dozer feed line device lifting

Coding （mm）

DIMENSIONS


WEIGHT

FC0604000C + FE0206140A

φ90*100

5.7 Universal pulley and bracket:

Pulley diameter φ90, nylon material

Q235 hot galvanized bracket

Divert to different angles For feed dozer feed drop ball lifting

Coding （mm）

DIMENSIONS


WEIGHT

FE0201107A φ32*φ4*289

0.6 Reset spring: Piano wire, dacromet surface

For feed dozer feed release device resetting

Coding （mm）

DIMENSIONS


WEIGHT

EC0302000E φ5*115

17.8

EC0302000F φ5*80

Steel bar:

Self-straightening plastic coated steel bar, low

ductility, preventing different lifting level between feed line front and ending, for feed drop ball lifting.

12.8

Coding mm）

DIMENSIONS


WEIGHT

HF0200003D φ60*1000*15

0.14

HF0200003E φ75*1000*15 0.17 Rubber-plastic heat insulation tube: Three models: 60, 75 and 90

Rubber-plastic material, black

Nice thermal insulation effect, flame-resistant

HF0200003F φ90*1000*15 0.2

Coding （mm）

DIMENSIONS


WEIGHT

HF0200003B φ60*1000*15

0.14

HF0200003A φ75*1000*15 0.17 PE heat insulation tube: Three models: 60, 75 and 90.

White PE material

With tin foil paper outside, nice thermal insulation

and waterproof effect.

HF0200003C φ90*1000*15 0.2

Coding （mm）

DIMENSIONS


WEIGHT

HF02000010 2000x1000x15

1.2

Heat insulation panel:

White PE material, with tin foil paper outside, nice

thermal insulation and waterproof effect. Associated with heat insulation tube for feed line

thermal insulation.

Coding （mm）

DIMENSIONS


WEIGHT

HF02000040 1000*0.4*L

0.5/㎡

PAP panel:

Photo thermal reflectivity＞85％

Flame-resistant, waterproof and anti-aging.

Associated with heat insulation tube and heat

insulation panel, prolong the service life of insulation tube and panel.

Coding （mm）

DIMENSIONS


WEIGHT

HF02000020 40*L

ￚ Tin foil adhesive tape/PAP adhesive tape

For heat insulation tube/ panel fixation

TEE FEED DROP DEVICE

Coding （mm）

DIMENSIONS


WEIGHT

FE0203400A 128*100*165

0.24

FB0105010A 148*125*195 0.32

FB02050100 148*125*195

Tee:

Four models: 60, 75, 90 and 125 PP material

Fast feed dropping, designed with rope controlled

slide shut-off inside, nice shutting effect.

Associated with adjustable feed pipe, feed drop amount adjustable.

FB04080000

Coding （mm）

DIMENSIONS


WEIGHT

FE02037000 600*140*354

4

FE02038000 600*140*362 4.4 Big tee:

Three models: 60, 75 and 90

SS+fiberglass 110mm feed drop outlet

Rope controlled shut-off slide FE02039000 600*140*370 4.9

Coding （mm）

DIMENSIONS


WEIGHT

FE0203700A 485*142*240

2.9

FE0203800A 485*157*240 3.6 Electric big tee：

Three models: 60, 75 and 90

SS 430 material

110mm feed drop outlet, fast feed dropping rate

Associated with electric push bar for out-house feed

line auto feed drop

FE0203900A 485*172*240 3.7

FEED DOSER

Advantages：

➢ 8L capacity，meeting 1-2 day feed amount requirement.

➢ Centro-symmetrical structure, avoid gravity caused deviation which lead to dosing error.

➢ Medicine adding cover design avoids cover missing, and can be hanged with sow info card.

➢ Removable bottom cone part, easy for cleaning.

➢ Fusiform adjusting panel pressing against the scale, the minimum scale pitch is 0.1L, which reduce

the error caused by manual operation.

。

Easy feed doser and feed pipe fixation can be fixed

within 15s.

。

Fission structure, easy splitting and

convenient for cleaning

The adjusting panel is made into fusiform, beautiful

and can act as pointer.

The scale can be accurate to 0.1L.

There are both weight and volume value for your

reference.

This medicine adding inlet is for manual or

automatic medicine adding.

The cover is in anti-loss design.

You can also hang sow info card to the

cover.

FEED-SAVING SOW FEEDER

A Mode B Mode C Mode

The feed drop speed can be adjusted via changing the space between inner cylinder and plastic ball.

When the feeder is not used, the plastic ball will seal the feed drop outlet under gravity. When the pigs are

eating, they will hog the plastic ball up, so that the feed get into the feed trough via outer cylinder.

Different feeding mode can be realized by working with different accessories.

Advantages

1. Keep the feed fresh, alow the sows to be fed with fresh feed 24hs a day.

2. Reduce the feed waste.

3. Better lactation, higher mating rate, higher weaning body weight

KEY PARTS

Coding （mm）

DIMENSIONS


WEIGHT

FH05090000 φ130*290

1.5 Feed drop device:

Nylon body, SS adjusting bar

Coding （mm）

DIMENSIONS


WEIGHT

FH05090500 370*180*450

1.5 Semi-transparent hopper: PP material

Associated with feed drop device as in feeding mode

C

Coding （mm）

DIMENSIONS


WEIGHT

φ117*700*2.5

1.1 Transparent tube:

Transparent PVC material Component for feeding mode A and B

Coding （mm）

DIMENSIONS


WEIGHT

φ80*150

-

φ75*150

Soft tube:

Two models: φ80 and φ75, associated with feed

dozer and tee, anti-corrosive and anti-aging. Component for feeding mode A and B

-

FEEDER SYSTEM

FH SS. FEEDER (PANEL ACTUATING TYPE)

Advantages: 1. Height adjustable feed actuating panel, making sure the pigs can be fed with fresh feed anytime. 2. Increase the feed turning rate, reduce feed wasting. 3. 304 SS material, sturdy and reliable structure. 4. The water drinking trough enable the piglet find water easily.

FH07 SS Nursery Feeder

No Coding Feeding

Space A B C D

Feeding

Capacity/

pigs

Drinker

Drinking trough Volume/L Weight/Kg

1 FH07220000 4 512.5 432 638 254 24-32 w/o w/o 55 27.4

2 FH07230000 6 768 432 638 254 36-48 w/o w/o 82.5 35.5

3 FH07240000 8 1023.5 432 638 254 48-64 w/o w/o 110 44.7

4 FH07250000 10 1279 432 638 254 60-80 w/o w/o 137.5 53.4

5 FH07260000 12 1534.5 432 638 254 72-96 w/o w/o 165 62.6

6 FH0722000A 4 512.5 432 638 254 24-32 w/ w/o 55 28.2

7 FH0723000A 6 768 432 638 254 36-48 w/ w/o 82.5 36.8

8 FH0724000A 8 1023.5 432 638 254 48-64 w/ w/o 110 46.3

9 FH0725000A 10 1279 432 638 254 60-80 w/ w/o 137.5 55

10 FH0726000A 12 1534.5 432 638 254 72-96 w/ w/o 165 64.3

11 FH0722000B 4 512.5 432 638 254 24-32 w/ w/ 55 30.4

12 FH0723000B 6 768 432 638 254 36-48 w/ w/ 82.5 39

13 FH0724000B 8 1023.5 432 638 254 48-64 w/ w/ 110 48.5

14 FH0725000B 10 1279 432 638 254 60-80 w/ w/ 137.5 57.2

15 FH0726000B 12 1534.5 432 638 254 72-96 w/ `w/ 165 66.5

Attention: This feeder model applies for 5-45kg nursery pigs.

FH08 SS Finishing Feeder

No Coding Feeding

Space A B C D

Feeding

Capacity/ pigs Drinker Volumn/L Weight/Kg

1 FH08220000 4 764.5 554 786 380 64 w/o 120 40.5

2 FH08230000 6 1146 554 786 380 96 w/o 180 54.9

3 FH08240000 8 1527.5 554 786 380 128 w/o 240 68.5

4 FH08250000 10 1909 554 786 380 160 w/o 300 83.7

5 FH08260000 12 2290.5 554 786 380 192 w/o 360 98

6 FH0822000A 4 764.5 554 786 380 64 w/ 120 43.6

7 FH0823000A 6 1146 554 786 380 96 w/ 180 59.2

8 FH0824000A 8 1527.5 554 786 380 128 w/ 240 73.9

9 FH0825000A 10 1909 554 786 380 160 w/ 300 90

10 FH0826000A 12 2290.5 554 786 380 192 w/ 360 105.8

Attention: this feeder model applies for 23-136kg fattening pigs.

FH09 SS Wean to Finish Feeder

No Coding Feeding

Space A B C D

Feeding

Capacity/

pigs

Drinker Drinking

trough

Volumn/

L Weight/Kg

1 FH09220000 4 764.5 554 786 380 48-64 w/ w/ 120

43.4

2 FH09230000 6 1146 554 786 380 72-96 w/ w/ 180

59.3

3 FH09240000 8 1527.5 554 786 380 96-128 w/ w/ 240

74.3

4 FH09250000 10 1909 554 786 380 120-160 w/ w/ 300

91

5 FH09260000 12 2290.5 554 786 380 144-192 w/ w/ 360

106.7

6 FH0922000A 4 764.5 554 786 380 48-64 w/o w/ 120

44.7

7 FH0923000A 6 1146 554 786 380 72-96 w/o w/ 180

60.7

8 FH0924000A 8 1527.5 554 786 380 96-128 w/o w/ 240

75.9

9 FH0925000A 10 1909 554 786 380 120-160 w/o w/ 300

92.4

10 FH0926000A 12 2290.5 554 786 380 144-192 w/o w/ 360

108.7

11 FH0922000B 4 764.5 554 786 380 48-64 w/o w/o 120

47.6

12 FH0923000B 6 1146 554 786 380 72-96 w/o w/o 180

63.6

13 FH0924000B 8 1527.5 554 786 380 96-128 w/o w/o 240

78.8

14 FH0925000B 10 1909 554 786 380 120-160 w/o w/o 300

95.3

15 FH0926000B 12 2290.5 554 786 380 144-192 w/o w/o 360

111.6

Attention: this feeder model applies for 5-136kg weans to finish pigs.

FH SS. FEEDER (ROD ACTUATING TYPE)

FH01 SS Nursery Feeder

No Coding Feeding

Space A B C D

Feeding

Capacity/ pigs Volumn/L Weight/Kg

Single/

double side

1 FH01012000

3 450 300 550 150 18 28.5 13.3 Single side

2 FH01013000 4 600 300 550 150 24 38 16.1

3 FH01014000 5 750 300 550 150 30 47.5 18.9

4 FH01021000 4 300 500 550 150 24 38 16.2

Double side

5 FH01022000 6 450 500 550 150 36 57 20.3

6 FH01023000 8 600 500 550 150 48 76 24

7 FH01024000 10 750 500 550 150 60 95 28.1

FH02 SS Fattening Feeder

No Coding Feeding

Space A B C D

Feeding

Capacity/ pigs Volumn/L Weight/Kg

Single/ double

side

1 FH02011000 3 750 385 700 250 24 63 22.2

Sigle side 2 FH02012000 4 1000 385 700 250 32 84 28.3

3 FH02013000 5 1250 385 700 250 40 105 33.6

4 FH02021000 6 750 770 700 250 48 135 35.9

Double side 5 FH02022000 8 1000 770 700 250 64 180 43.3

6 FH02023000 10 1250 770 700 250 80 225 50.9

Attention: this feeder model applies for 25-130kg fattening pigs.

DRY& LIQUID FEEDER

No

Coding Capacity

(L) H H1 h h1 A B C D

Feeding

Capacity/ pigs

适

Applicable pigs

1 FH03000000 100 1260 930 120 106 620 750 610 399 40 6kg-30kg

2 FH0300000A 100 1260 930 120 106 620 750 610 399 40 6kg-30kg

3 FH04000000 100 1440 1120 187 92 864 884 760 530 40 18kg-100kg

4 FH0400000A 100 1340 1020 159 92 774 884 760 530 40 18kg-100kg

AD LIBITUM CYLINDER FEEDER

No Coding A B C D Feeding

Space

Feeding

Capacity/ pigs

Capacity

(L)

Applicable

pigs

1 FH12000000 762 559 564 76 10 40 106 5-30KG

2 FH13000000 914 787 800 127 8 60 159 25-130KG

3 FH14000000 914 787 800 127 8 60 159 5-130KG

CL

IMA

TE

CO

NT

RO

L S

YS

TE

M

CLIMATE CONTROL

NAMES

DESCRIPTION BRANDS

BH 3209

Climate

Controller

Climate controller Specially

designed for pig farms.

Big Herdsman

Extended control of 5 fan

groups at most.

Automatically control air inlet

and lifting panel door opening amount.

Including 2 sets analog signal output, automatically control 2

speed-adjusting fan groups.

Auto control heating system,

cooling pad system and high/ low

temperature alarm.

Set with temperature curve

inside; automatically adjust to

required temperature as per pig growing.

Capable of connecting to 3 in-house temperature sensors and 1

out-house temperature sensor at

most.

Capable of water and feed

consumption calculation.

NAMES DESCRIPTION BRANDS

Extended control of 8 fan

groups at most.

Automatically control air inlet and lifting panel door

opening amount.

Including 2 sets analog signal output, automatically

control 2 speed-adjusting fan

groups.

Auto control heating systm,

cooling pad system, feeding

system, fogging system, lighting system and high/ low temp alarm.

Set with temperature curve

inside, automatically adjust to the

required temprature as per pig

growing.

Capable of connecting to 3

in-house temperature sensors and 1 out-house temperature sensor at

most.

Capable of connecting to 1

CO2 sensor, detecting CO2

density.

Capable of water and feed

consumption calculation.

NAMES DESCRIPTION BRANDS

Data searching, reviewing

and changing for contrller in each house.

Cilimate controller historical data storage and backup copy

Ranked message sending when there is high/low temp

alarm.

NAMES

DESCRIPTION BRANDS

Farm

Online

Management System

Applicable to all models of

Big Herdsman Climate

Controllers

Big

Herdsman

Online management

computor is capable of uploading data to group center

via internet.

Group center provide data

WEB release service. User can

login to check the data via

computor or cell phone and so on.

On site map navigation, clear display and simple

operation.

Remote reading and

changing the data in controller.

Browing and printing related

data in variouse format.

GALVANIZED FAN

coding type power

air quantity energy

efficiency

ratio

m³/h/w

（mm）

dimension

（±5mm）

opening

dimension 0 Pa 12 Pa 25 Pa 37 Pa 50 Pa

EF1000000X

1.1kw 41000 39000 36400 33700 30500 26.2 1380x1380x

1576 1400x1400

50” Box Fan

(2013 model)

EF1300000X

1.1kw 46500 44400 41900 39400 36600 30.1

1380*1380*

450

1400x1400

50” Cone Fan

(2013 model)

EF1200000X

1.1kw 49000 45900 42700 38700 33900 40.5 1555*1700*

1360

(H)1620x

(W)1500 54” Cone Fan

(Down dip

Structure)

coding type power

（m³/h）

air quantity

energy

efficiency

ratio

m³/h/w

（mm）

dimension

（±5mm）

opening

dimension 0 Pa 10Pa 20 Pa 30 Pa 40 Pa

EF0615000X 1.1kw 42300 41300 39200 37700 35900 26.1 1375*1600*

1356

Brick wall:

(H)1400 x

50”

Butterfly

Cone Fan

(W)1410

Steel wall:

1400x1400

EF00000XXX

1.1K

W

38400 37000 35900 34300 32800 25.5 1380x1380x

460

Brick wall:

(H)1400 x

(W)1410

Steel wall:

1400x1400

50” box fan

EF01000XXX

0.4K

W 17100 15750 14400 12550 10700 25.4

1000*1000*

460 1020x1020

36” box fan

FIBERGLASS CONE FAN

coding type power

（m³/h）

blast capacity

energy

efficiency

ratio

m³/h/w

（mm）

dimension

（±5mm）

opening

dimension 0 Pa 12 Pa 25 Pa 37 Pa 50 Pa

EF1409000X

1.5kw 58200 54900 51400 47500 42700 31.9 1590*1640*

1270

（W*H）

：1530*1560 55” fiberglass

cone fan

EF1509000X

1.1kw 48100 45300 41800 38200 34800 30.6

1495*1530*

1205

（W*H）


cone fan

EF1609000X

0.75kw 24000 22400 21000 19000 16700 23 1155*1

155*1200

（W*H）


cone fan

EF1709000X

0.3KW

11800 10800 10100 9200 8000 21

800*800*10

05

（W*H）


cone fan

EF2009000X

0.15K

W 5820 5300 4700 3710 2550 28.4

655*65

5*905

（W*H）


cone fan

OTHER FAN MODELS

CODING （L/mm）

DIMENSIONS

DESCRIPTION

（kg）

WEIGHT

EF040000XX 765*765*900

40kg 24” cone fan, 0.37kw, mainly used for minimum ventilation associated with air inlet, for spring and

autumn ventilation and cross ventilation.

CODING DIMENSIONS


WEIGHT

EF041000XX 765*765*940

36kg 24” fan, with rain shield, 0.37kw, with air deflecting

housing, avoid inter-house air pollution.

AIR INLET

CODING DIMENSIONS


WEIGHT

EF070000XX

H=2650，

(OD)=φ660

(wall thickness) 4.5

79kg 24” roof fan, 0.37kw, for poultry and livestock

house ventilation

CODING DIMENSIONS


WEIGHT

EF220000XX H=2650 ，

(OD)=φ760mm

。

72kg 28” roof fan, 0.55kw, polyethylene integral molded, the

air inlet opening is controlled by air valve actuator controller, which can open or close the baffle plate and

avoid air return effectively. This model is used for poultry

and livestock house ventilation.

CODING DIMENSIONS DESCRIPTION （kg）

WEIGHT

EC01010000

(W)=600mm

(H)=320mm (Depth)=160mm

Side wall air inlet (spring type), MPS (Modified Polystyrene)

material, anti-aging, endurable in low and high temperature.

Capable of 108°arbitrary opening amount


WEIGHT

EC0100000C 790*790*210

Four-side ceiling air inlet, for ventilation all year round. The

opening amount will be automatically adjusted as per fan operation, no need for motor or manual control.


WEIGHT

EC0100000D 790*300*210

Double-side ceiling air inlet, for ventilation all year round. The opening amount will be automatically

adjusted as per fan operaion, no need for motor or manual

control.


WEIGHT

EC010000MG 630*630mm

（double side）

EC010000NG 800*630mm

（double side）

Ceiling air inlet, for pig house all year round ventilation.

The opening amount will be automatically adjusted as per fan operation, manual control or auto control with driver.

CURTAINS


WEIGHT

EC0100000X 585*565mm

Side wall transparent air inlet, no need for any driving

device. The opening can be automatically adjusted as per

the in-house static pressure, which realizes even air letting in.


WEIGHT

EC11000000 opening dimension

615*735

Auto balance air inlet, mounted to ceiling, no need for

any driving device. The opening can be automatically

adjusted as per in-house static pressure, which realizes

even air letting in. Please lock it when it’s not in use in summer.


WEIGHT

L*1200*35mm ， L is

decided as per fan

airflow

Lifting panel door, main composing material is

high intensity PVC panel, coated with anti-

corrosive galvanized sheet. Designed with

double direction guide rail, and the system is

easily controlled by steel wire suspension

system.


WEIGHT

EM010101XX (H)* (L) mm，

H≤2.8m，

200g/m² Rolling curtain is made of double side PE coated cloth, added with anti-corrosive and wear-resistant

material, easily rolling up or rolling down.


WEIGHT

EM010101XX (H)* (L) mm，

H≤2.8m，

200g/m2 Lifting curtain is made of double side PE coated

cloth, weight≥200g/m2， added with additive and

anti ager, which prolongs its service life.

CODING DIMENSIONS （kg）

WEIGHT

ES0201020X

(Thickness)：

0.1m、0.15m

(W)：0.3m、0.6m

(H)：1.5m、

1.8m、2.0m

Cooling pad is processed with special formula and has nice water absorbing performance. It can

effectively control the in-house temperature

associated with fans and climate controller.

Aluminum alloy frame, beautiful and endurable. The system is with high intensity and is climate-resistant.

Even water distribution for its tight structure.

AIR FILTRATION


WEIGHT

L*1200

Primary air filtering cloth：

High density, anti-pollution, anti-corrosive, endurable

in both low and high temperature.

Filtering range 5~20 μ m


WEIGHT

EK02010000 240*240*20

Primary air filter Adopt MERV8 filter material, humidity-resistant and

wear-resistant.

Filtering grade G4, bio aerosol particle eliminating

efficiency raised by 35%.


WEIGHT

EK02020000 240*240*120

Sub high efficiency air filter Adopt MERV15 filter material, humidity-resistant and

wear-resistant.

Filtering grade H8, filtering efficiency Log6

/MERV15

PE

NN

ING

SY

ST

EM

FARROWING PEN

PF01 PF02 PF11 PF12

2.4 2.4 2.2 2.2

0.6 0.6 0.6-0.7 0.6-0.8

1.0 1.05 1.1 1.1

B01

B02

B03

B04

B01

B02

B03

B04

B01

B02

B03

B04

B01

B02

B03

B04

666

576

477

666

576

477

666

576

477

666

576

477

sow: drinking bowl/

nipple drinker

piglet: drinking bowl/

nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

Farrowing pen is specially made for sow farrowing period, for lactation. The main parameters are as

follows:

Models

PF01

Round Tube Fixed

Type

PF02

Round Steel Fixed

Type

PF11

Adjustible Type

PF12

Comprehesive Type

Material Round tube Round steel Round tube Round tube

Length(m) 2.4 2.4 2.2 2.2

Width(m)

(middle to 0.6 0.6 0.6-0.7 0.6-0.8

middle)

Height (m) 1.0 1.05 1.1 1.1

Anti-pressing

bar U shape U shape U shape Floating

Piglet

restriction bar w/o w/o w/ w/

Piglet PVC

panel

B01 type□

B02type□

B03type□

B04type□

B01type□

B02type□

B03type□

B04type□

B01type□

B02type□

B03type□

B04type□

B01type□

B02type□

B03type□

B04type□

Sow feeder

PE feeder□

SS feeder□

Welded feeder□

PE FEEDER□

SS feeder□

Welded feeder□

PE FEEDER□

SS feeder□

Welded feeder□

PE FEEDER□

SS feeder□

Welded feeder□

Piglet feeder optional optional optional optional

Slat system

666 constitution□

576 constitution□

477 constitution□

666 constitution□

576 constitution□

477 constitution□

666 constitution□

576 constitution□

477 constitution□

666 constitution□

576 constitution□

477 constitution□

Piglet heating

heating lamp□

piglet cabin□

heating nest□

heating pad□

heating lamp□

piglet cabin□

heating nest□

heating pad□

heating lamp□

piglet cabin□

heating nest□

heating pad□

heating lamp□

piglet cabin□

heating nest□

heating pad□

Feeding type

manual feeding□

Ad libitum□

auto feeding□

manual feeding□

Ad libitum□

auto feeding□

manual feeding□

Ad libitum□

auto feeding□

manual feeding□

Ad libitum□

auto feeding□

Drinking ways

sow: drinking bowl/

nipple drinker

piglet: drinking

bowl/ nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

sow: drinking bowl/

nipple drinker


nipple drinker

Surface

material Hot dip galv. Hot dip galv. Hot dip galv. Hot dip galv.

FARROWING PENS

Model (mm)


(kg)

WEIGHT

PF01 2400*600*1000

90 Name: round tube non-adjustable

farrowing pen

Material:1”tube, 3/4”tube,1/2”tube

(mm)


(kg)

WEIGHT

PF02 2400*600*1050

120 Name: round steel non-adjustable

farrowing pen

Material：φ20/ φ16/ φ12 round steel

(mm)


(kg)

WEIGHT

PF11 2200*600*1100

87 Name: round tube adjustable

farrowing pen

Material: 1”tube,3/4”tube,1/2”tube

(mm)


(kg)

WEIGHT

PF12 2400*650*1100

92 Name: round tube comprehensive

farrowing pen

Material:1”tube, 3/4”tube,1/2”tube

PIGLET PEN

CODING (mm)


(kg)

WEIGHT

PB0061000A 500*30

3.7kg/m

PB0061000B 500*35 3.8kg/m Name: nursery pig PVC panel

Spec. : gray, straight rib, without

connection fitting

Wall δ: outer wall 2.0mm, inner rib 1.0mm PB0061000C 600*35 4.9 kg/m

Model (mm)


(kg)

WEIGHT

B01 2400*1800*500

（600）

Name: all PVC panel

Spec.: 600*35/500*35/500*30(mm)

Model (mm)


(kg)

WEIGHT

B02 2400*1800*500

（600）

Name: front grill

Spec.：600*35/500*35/500*30(mm)

Model (mm)


(kg)

WEIGHT

B03 2400*1800*500

（600）

Name: half grill& half PVC panel

Spec.: 600*35/500*35/500*30(mm)

Model (mm)


(kg)

WEIGHT

B04 2400*1800*500

（600）

Name: all grill

Spec.: frame 1/2” tube, grillφ10 round steel

SOW FEED TROUGH

CODING (mm)


(kg)

WEIGHT

FH05040000 440*360*230 3.5

Name: sow feed trough

Material: black PE, δ=9mm

编码

CODING

尺寸(mm)

DIMENSIONS

产品描述

DESCRIPTION

重量(kg)

WEIGHT

FH0505000C 455*370*230

2.26 Name: sow feed trough

Material: SS 304, δ=1.0mm

CODING (mm)


(kg)

WEIGHT

FH0501000A 403*330*435 6.4

FH0501000B 343*330*435 Name: sow feed trough Material: SS304, δ=1.5mm

5.9

CODING (mm)


(kg)

WEIGHT

FH01040000 φ250

0.82 Name: piglet feed trough

Material: SS304, δ=1.2mm

FLOORING

CODING (mm)


(kg)

WEIGHT

LZ0820114D 600*600

14 Name: 600*600 cast iron slat (with

manure cleaning opening)

Material: QT450

CODING (mm)


(kg)

WEIGHT

LZ0420113D

15.7 Name: 700*600 cast iron slat

Material: QT450

CODING (mm) DESCRIPTION (kg)

DIMENSIONS WEIGHT

LZ0420114D 700*600

16.3 Name: 700*600 cast iron slat ( with

manure cleaning opening)

Material: QT450

CODING (mm)


(kg)

WEIGHT

LZ08201010 600*600

600*600

2.36 Name：600*600 plastic slat

Material：PP

FLOORING

CODING (mm)


(kg)

WEIGHT

LZ08201110 600*600

2.30 Name: 600*600 plastic slat

Material: PP

CODING (mm)


(kg)

WEIGHT

LZ0820101A 600*600

2.74 Name: 600*600 solid plastic slat

Material: PP

CODING (mm)


(kg)

WEIGHT

LZ0520112B 400*600


Material: PP

CODING (mm)

DIMENSIONS

DESCRIPTION

(kg)

WEIGHT

CODING

(mm)


(kg)

WEIGHT

LZ0820113D 600*600

13.5 Name: 600*600 cast iron slat

Material: QT450

CODING (mm)


(kg)

WEIGHT

LZ08201030 500*600


Material: PP

CODING (mm)


(kg)

WEIGHT

LZ0420112B 700*600


Material: PP

CODING (mm)


(kg)

WEIGHT

LZ0820103B 500*600


Material: PP

PB00570000 130*45*72

0.06 Name: slat beam support

Material： PP

CODING (mm)


(kg)

WEIGHT

PB00620000 130*45*95

0.08 Name： slat beam support

Material： PP

CODING (mm)


(kg)

WEIGHT

PF10340000 30*6*120

1.7kg/m Name： slat beam

Material: fiberglass

2400×1800 Slat Composition

PIGLETS HEATING

CODING (mm)


(kg)

WEIGHT

PF10910000 φ250*320

0.245 Name: heating lamp shade

Material: PP material

Light transmitting, flame-resistant, wear-

resistant

CODING (mm) DESCRIPTION (kg)

DIMENSIONS WEIGHT

PF10970000

1308*655*511

6.73

PF1097000A

Name: triangular piglet nest

Material: 80%PE+20% fiberglass;

For H=500mm PVC panel

PF10980000

1308*655*611

6.87

PF1098000A

Name: triangular piglet nest

Material: 80%PE+20% fiberglass

For H=600mm PVC panel

CODING (mm)


(kg)

WEIGHT

HF04000040

890*498

Single piglet heating panel

80W, line out from right 2.75

HF0400004A

Single piglet heating panel

(with temp sensor) 80W,

line out from right

2.8

HF04000050 Single piglet heating panel

80W, line out from left 2.75

HF04000060

1270*648

Dual piglet heating panel

160W 3.4

HF0400006A Dual piglet heating panel

(with temp sensor) 160W 3.45

CODING (mm)


(kg)

WEIGHT

PF1181000A 1200*500*3 2.15

PF1181000B 1200*400*3 Name: PC piglet cabin

Material: transparent PC 1.75

GESTATION STALL

Model (mm)


(kg)

WEIGHT

PM01

2200*650*1100

customized size

available

41 Name: PM01 Gestation Stall (incl. feed pipe)

Material： frame 3/4”pipe, grill 1/2” tube

Model (mm)


(kg)

WEIGHT

PM02

2200*650*1100

customized size

available


Material：φ2, φ16, φ14 round steel

Model (mm)


(kg)

WEIGHT

PM05

2400*650*1100

customized size

available


Material： frame1”pipe, grill 3/4” pipe

Model (mm)


(kg)

WEIGHT

PM03

2200*650*1100

customized size

available


Material： frame 3/4”pipe, grill 1/2” tube

Model (mm)


(kg)

WEIGHT

PM04

2200*650*1100

customized size

available


Material: 40 angle bar, φ18, φ12 round steel

THROUGH FEED TROUGH

CODING (mm)


(kg)

WEIGHT

FH0601010X 100*150*310

6.7kg/m Name: N shape through feed trough

Material: SS 304 δ=1.5mm

CODING

(mm)

DIMENSIONS

DESCRIPTION

(kg)

WEIGHT

FH0602010X 100*150*310

8.3kg/m Name: M shape through feed trough

Material: SS 304 δ=1.5mm

CODING

(mm)


(kg)

WEIGHT

FH0603010X 180*280*320 8.3kg/m

NURSERY PEN

Name: U shape through feed trough

Material SS 304 δ=1.5mm

CODING (mm)


(kg)

WEIGHT

FH06000800 φ52mm

0.3 Name: bottom drainage plug

Material: SS 201+black oil-resistant

NBR rubber + cast copper piece

CODING (mm)


(kg)

WEIGHT

FH06000800 φ90mm

0.2 Name: side drainage plug

Material: SS304+ silicon sealing ring

Model (mm)


(kg)

WEIGHT

PB01

H=750/700

Customized

length and

width

Name: PB01 Nursery Pen

Spec.: 600*35PVC panel+ 1pc 35*35

square tube

Model (mm)


(kg)

WEIGHT

PB02

H=750/700

Customized

length and

width

Name: PB02 Nursery Pen

Spec.: 500*35PVC panel+2 pcs 35*35

square tube

CODING (mm)


(kg)

WEIGHT

PB00570000 130*45*72


Material: PP

CODING (mm)


(kg)

WEIGHT

PB00620000 130*45*95


Material: PP

CODING (mm)


(kg)

WEIGHT

PF10340000 30*6*120 1.7kg/m

Name: slat beam

Material: fiberglass

BIG PENS (ROUND STEEL SERIES)

BIG PEN MODEL BOTTOM FRAME GRILL TOP FRAME HEIGHT

(mm)

HEIGHT

ABOVE

FLOOR

(mm)

GRILL

NUMBER

Gilt pen φ20

φ12

round

steel

φ12

φ12

round

steel

40

40

angle bar 1000 100 9

Nursery

pen φ18

φ12

round

steel

φ12

φ12

round

steel

40

40

angle bar 700 50 7

Fattening

pen φ20

φ12

round

steel

φ12

φ12

round

steel

40

40

angle bar 900 50 8

Wean to

finish pen φ20

φ12

round

steel

φ12

φ12

round

steel

40

40

angle bar 900 50 8

Sow pen φ20

φ12

round

steel

φ12

φ12

round

steel

40

40


Boar pen φ20

φ12

round

steel

φ12

φ12

round

steel

40

40


DR

INK

ING

SY

ST

EM

ECO AUTOMATIC REGULATOR

Wamba Wishes: Each one of pigs gets stable and optimal drinking water flow without being influenced by water pressure.

ECO Automatic Regulator Parameters

Name Piglet Constant Flow Nipple Regular

Fattening Nipple Regulator Sow Nipple Regulator

Application Piglets, weaners and finishers Fattening ups, sows and boars Farrowing sows

Coding WZ0403010B WZ0403020B WZ0403030B

ECO Automatic Regulator (Nipple Drinker)

Features：

⚫ Significant reduction of water wastage ⚫ Less manure production

⚫ Better growth due to an optimal feed/water ratio ⚫ Water saving= costs saving

⚫ Less medicine usage

⚫ Pig farm water pressure range：0.6~6kg.

Water flow 0.5L/min 1.0L/min 2.5L/min

（mm）

Dimension 55*G1/2 63.5*G1/2 74*G1/2

（KG）

Weight 0.06 0.089 0.143

Water flow curve

REGULAR NIPPLE DRINKER

CODING （L/mm）

DIMENSIONS


WEIGHT

WZ0403010A 55*G1/2

0.06 Piglet duckbill nipple drinker

CODING （L/mm）

DIMENSIONS


WEIGHT

WZ0403020A 63.5*G1/2 育肥鸭嘴式饮水器

0.089 Fattening duckbill nipple drinker


WEIGHT

WZ04030300 74*G1/2

0.143 Farrowing sow duckbill nipple drinker


WEIGHT

WZ04070300 63.5*G1/2

0.077 Piglet water saving nipple drinker


WEIGHT

WZ04070200 79*G1/2

0.098 Fattening water saving nipple drinker

CODING ）DIMENSIONS DESCRIPTION

（kg）

WEIGHT

WZ0407010A 115*G1/2

0.242 Sow water saving nipple drinker


WEIGHT

WZ0404010A 31*G1/2

0.060 Nipple drinker (associated with bowls)

CODING

DIMENSIONS DESCRIPTION WEIGHT

WZ0406010A 35*G1/2

0.067 Nipple drinker (associated with dry and

liquid feed trough)


WEIGHT

WZ0405010A 35.5*G1/2

0.090 Nipple drinker (associated with dry and liquid feeder)

DRINKING BOWLS

NO. CODING W（cm） H

（cm）

D

（cm）

（mm）

THICKNESS MATERIAL DESCRIPTION

1 WZ04010100 21 29 16 1.0 SUS304

For fattening pigs G1/2 inner screw

2 WZ04010200 19 27 11 1.0 SUS304 G1/2

For nursery pigs G1/2 inner screw

3 —— 15 21 9 1.0 SUS304

For farrowing piglets G1/2 inner screw

NO. CODING D（cm） H（cm）（mm）

THICKNESS MATERIAL DESCRIPTION

1 WZ04020400 20 19 1.0 SUS304 G1/2

For farrowing sows G12 inner screw

2 WZ04020300 16 15 1.0 SUS304 G1/2

For finishers G12 inner screw

3 WZ04020200 14 11 1.0 SUS304 G1/2

For nursery pigs G1/2 inner screw

4 WZ04020100 12 8 1.0 SUS304 G1/2

For farrowing piglets G1/2 inner screw

OTHERS


WEIGHT

WZ04080300 200x140

0.18

Water level controller, for auto controlling the

water level in water trough. Connected with 1/2”

round tube at the bottom of controller.

Applicable water pressure range: 0.05~0.25Mpa.

Applicable water flow range: 1.8~4.2L/min


WEIGHT

WZ0300010A

200x140

。

1.2

Medicator, for medicine adding. Medicine percentage can be adjusted as per requirement.

Specifications: D25RE5. Applicable pressure

range: 0.03~0.6Mpa. Water flow range

10~2500L/h, medicine percentage 1%~5%, 3/4 outer screw.


WEIGHT

—— 800*200

1.8

Drinker suspension support, for drinker

suspension and height adjusting as per pig body

height. Applied for nursery and fattening pig

water drinking. Top 1/2 outer screw, bottom 1/2

inner screw.


WEIGHT

—— 800*200

2

Adjustable drinker support, applied for nursery

and fattening pig water drinking. Drinker height can be adjusted as per pig body height. Top 1/2

outer screw, bottom 1/2 inner screw.

DR

AIN

AG

E S

YS

TE

M

DRY AND WET MANURE CLEANING MACHINE

NO. MANURE

GUTTER WIDTH W L H

/KG

WEIGHT

1 1.0 950 1190 305 48.5

2 1.1 1050 1190 310 49

3 1.2 1150 1190 315 50.5

4 1.3 1250 1190 320 52.3

5 1.4 1350 1190 325 54.1

6 1.5 1450 1190 330 56

7 1.6 1550 1190 335 57.8

8 1.7 1650 1190 340 59.6

9 1.8 1750 1190 345 61.5

10 1.9 1850 1190 350 63.3

11 2.0 1950 1190 355 65.1

12 2.1 2050 1190 360 67

13 2.2 2150 1190 365 69.8

14 2.3 2250 1190 370 72.6

15 2.4 2350 1190 375 75.4

16 2.5 2450 1190 380 78.2

17 2.6 2550 1190 385 81

CODING

DIMENSIONS DESCRIPTION （kg）

WEIGHT

SA11000000 475*475*135

17.9 Corner, for steel wire direction turning


WEIGHT

SA10000000 680*380*355 。

95 Manure cleaning driver, 0.75kw.


WEIGHT

SA09010000 6000*150*115

13.8 Urine draining tube, 6m/ unit. This tube

can collect liquid and drain it out.


WEIGHT

SA09020000 6000*190*105

9.36 Urine drainage tube support, 6m/ unit. It

needs to be cut into 10cm/unit for installation.


WEIGHT

SA09030000 6000*19*15

0.5 Urine drainage tube sealing bar, 6m/ unit.

For cover the opening of drainage tube. It is taken off after the manure gutter hardened.


WEIGHT

SA09040000 6000*28*11

0.97 Urine drainage tube connecting bar, 6m/

unit, used for drainage tube connection and keep the tubing line straight. It need to be

cut into 20cm/ unit for installation.

DRAINAGE TUBING PARTS

CODING


WEIGHT

SA0602000D Φ200

1.5 Φ200 saddle shape manure drainage piece,

installed to Φ200 drainage tube

SA0602000B Φ250

3.2 Φ250 saddle manure drainage piece, installed to Φ250 drainage tube


WEIGHT

SA0601000D Φ200

1.5 Φ200 drainage plug ， for Φ200 drainage

hole sealing

SA0601000A Φ250

3.2 Φ200 drainage plug ， for Φ200 drainage

hole sealing


WEIGHT

Φ200

1.4 Φ200 extended piece, directly connected to

Φ200 tee

Φ250

2.2 Φ200 extended piece, directly connected to Φ200 tee


WEIGHT

SA0603000A 250*250 1.0


WEIGHT

GSGA00056B Φ200*6000

23.3 Φ200PVC drainage tube δ=4.9mm ，

0.63MPa 6m/ unit

GSGA00015B Φ250*6000

32.7 Φ250PVC drainage tube δ=6.2mm ，

0.63MPa 6m/ unit

Φ110 air drainage valve, for drainage tube

air draining, connecting with Φ110 tube

HE

AT

ING

SY

ST

EM

RADIATOR

Coding


WEIGHT

HL01010000 120*6000

6 Double wing tube

Aluminum material, radiating power 160~180W/m.

Medium: water

Coding


WEIGHT

HL02000010 120*6000

6 Triple wing tube:

Aluminum material, radiating power 160~180W/m.

Medium: water

Coding DIMENSIONS DESCRIPTION

（kg）

WEIGHT

HL04010000 Φ92*6000

34 Finned tube:

Hot galvanized carbon steel, radiating power 500~600W/m.

Medium: water

CL

EA

NIN

G &

DIS

INF

EC

TIO

N S

YS

TE

MS

MOVABLE COLD-WATER HIGH-PRESSURE CLEANER

German Kärcher—World Leading Cleaning Brand

Cold water cleaner: compact model, HDS 16/5C.

This cold water high-pressure cleaner is used in construction, agricultural and forestry sectors, as well

as industry and municipal facility’s. It’s famous for nice quality, compact structure, outstanding mobility

and easy operation.

Technical data

PH/ Type of current Ph/v/Hz 1/230/50

Flow rate L/h 230-560

Operation pressure bar /Mpa 30-150/3-15

Max. pressure bar /Mpa 190/19

Connection power kw 3.1

Weight kg 23

Dimensions mm 360x375x925


Hot water cleaner: HDS 12/14-4 ST Gas

This model boasts of superior safety, and is with

pressure venting valve, gas temp monitoring, water

tank dry-turning prevention device, and pressure

resistant SDS soft tube. This is associated with Eco-

Line broiler, and the whole set conforms to the latest

Bim Sch Emission Standard.

MOVABLE HOT WATER HIGH-PRESSURE CLEANER

Technical data




Max. temperature ℃ 80-155

Connection power kw 9,3

Fuel consumption rate kg/h 8,3

Detergent tank L 25

Weight kg 186


Detergent tank L 20-10

FIXED HOT WATER HIGH-PRESSURE CLEANED/ GAS


Hot water cleaner: super model, HDS 13/20-4 S

This model is superior for its new function---ECO

mode. When the cleaner is set in ECO mode, it can

work automatically under most temperature levels. It

will also save costs and protect the environment.

Technical data




Max. temperature ℃ 98


Gas consumption rate m³/h 8.9

Weight kg 170


FIXED HOT WATER HIGH-PRESSURE CLEANER/ OIL

Technical data




Max. temperature ℃ 155-80


Fuel consumption rate kg/h 5.8

Weight kg 140



Hot water cleaner: HDS 9/14-4 ST

This model boasts of superior safety, and is with

pressure venting valve, gas temp monitoring, water

tank dry-turning prevention device, and pressure

resistant SDS soft tube. This is associated with Eco-

Line broiler, and the whole set conforms to the latest

Bim Sch Emission Standard.

Documents

WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT · WAMBA FARMING EQUIPMENT: PIGGERY EQUIPMENT . M. HOT GALVANIZED SILO Material ：hot galvanized sheet（zinc layer 275g/m2） Advantages：