Upload
ravireddy237686
View
229
Download
0
Embed Size (px)
Citation preview
PubSub_WaitForReply Senario:
first take an input document and create it as an iput doc make publishable true and we will get the figure as shown below.
then take an outputdoc and then we will get the figure as shown below make this publishable true.
Then take the map as shown below take publish and wait.
we can get this in wmpublic pub publish and wait.
copy input and paste it in input as shown below.
then go to pipeline and fill the values as below.
give document type name as :inputdoc name,map from document to waitfor inputdoc,local :trueasync :truethen go to wmpublic publish wait for reply.
next take write to file and we can get .
now take a flow subscriber and we get this as follows .
now take input and paste it as shown below.
now map the values as shown in figure.
now goto publish take reply as shown in figure.
or we can do it as follows.
now goto reply and map it as show below.
now take a trigger and we will get it as show below.
now go to service and take it .
now select the input document and we get it as shown below.