15
VIRTUAL 3D ENVIRONMENTS USER MANUAL Version 1.0 Landscapes Unlimited, InWorldz and Avination

Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

  • Upload
    sominel

  • View
    1.110

  • Download
    5

Embed Size (px)

DESCRIPTION

This is a user manual for surrounding environments by Landscapes Unlimited in the InWorldz and Avination virtual worlds

Citation preview

Page 1: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

VIRTUAL 3D ENVIRONMENTS

USER MANUAL

Version 1.0 Landscapes Unlimited, InWorldz and Avination

Page 2: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

2

Table of Contents

1. Introduction 2. Before you start: change some viewer settings 3. Installing your landscape item 4. Problems installing your landscape item 5. Customizing your landscape item: connecting the HUD to the

landscape item 6. Problems establishing a connection between the HUD and the

landscape item 7. Operating the HUD 8. Issues with Mega Prims 9. Exchange and Refund Policy 10. Liability 11. Stay informed about new items and technology

Page 3: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

3

1. Introduction

Thank you for purchasing a Landscapes Unlimited landscape item. The first landscapes were created in Second Life in 2009; the first skybox environments shortly before Christmas 2009, and the first sim surround environments in April 2010. Now they can be seen in various shapes and sizes throughout Second Life. At this time their level of detail is unmatched.

In September 2011, a new set of landscape elements was released, which replaced the previous versions. This innovative set incorporates an advanced system that allows you to change your environment by means of a HUD, and lets your own imagination determine the extent of your customizations. The flagship of this set, the Sim Surround Environment Rezzer, was brought to InWorldz and Avination in November 2011.

Use this manual to exploit your landscape item to its fullest. I hope you enjoy my work.

Sominel Edelman October 2011

Page 4: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

4

2. Before you start: change some viewer settings

Your landscape item is made of mega prims. To be able to handle them properly, it is necessary to adjust some settings of your viewer:

· Increase your draw distance: Our biggest items are 1000x1000m in size. In order to be able to see them from all over your region, you should increase your draw distance to at least 128m (Preferences -> Graphics tab).

· Uncheck Limit Select Distance: You may not be able to select, move or touch items that are far away. You can enable this by unchecking Limit Select Distance in the Advanced menu of your viewer. Consult your viewer documentation

Page 5: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

5

3. Installing your landscape item

Locate your landscape item in your inventory. Decide where you are going to drop the item:

· Sim Surround Environment: find solid sim ground anywhere in your region

· Skybox Environment: find (or create) a solid prim surface at the appropriate height. Make sure this surface is not above 3,900m. If it is, your item may go off-world and get lost

Zoom in to make sure you drop it at the right spot, then drag it from your inventory and release it.

After releasing it, it will move into position by itself:

· Sim surround environment: to coordinate 128,128,100 · Skybox environment: to a height where the bottom of the environment

will be just below the prim on which you dropped it. No horizontal displacement.

Note: It may take some time for the item to load; some items carry high-resolution textures.

Page 6: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

6

4. Problems installing your landscape item

Your landscape item gets returned to your inventory

· You may have dropped it at an unsuitable spot. Please read the directions in Chapter 3, and try again.

· You may not be allowed to build on the parcel. Wear the right group title, or ask the parcel owner to allow you build permissions

Your landscape item does show in-world, but it’s not in the right spot

· Ground level of your region is too high: higher than 50m near corners or edges, or higher than 100m in the middle. The item gets stuck on the hills when it moves into place. You should lower the ground level in the appropriate places, and release/move the item closer to where it needs to go. You can always take it back into your inventory and try again.

Your landscape items does not show in-world, yet it was not returned to your inventory

· Search for it in your inventory. Use ‘Environment’ as a keyword for Inventory Search

· Fly up and down and see if it shows at a different height. Take it back in your inventory and drop it elsewhere

If you looked carefully and still didn’t find it, then you can contact Sominel Edelman to work out a solution.

Your item is visible in-world, yet it does not load completely: textures are grey or blurry, or sculpted prims do not have the correct shape

· Texture load on your region is high, or your internet connection is slow. Wait for textures to download completely

· Your viewer saved incomplete textures to its cache file, and keeps on displaying these. Reset the cache file and restart your viewer. Consult your viewer manual on how to do this

· Check if others have the exact same problem too. Exchange snapshots. If so, then contact Sominel Edelman to work out a solution.

Page 7: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

7

5. Customizing your landscape item: connecting the HUD to the landscape item

All landscape items can be customized by an advanced HUD. With this HUD you can:

· Change landscape setup: switch to other environments, or remove or add landscape sections, like waves, trees and mountains ranges

· Change surface textures: pick any of more than 250 surface textures for various landscape sections (mountains, islands, beaches)

· Adjust many texture properties - Brightness - Glow - Transparency - repeat factor - color - full bright - shininess

· Allow group member to control your landscape item · Skybox environment: hide the environment

You can connect the HUD to the landscape item in this way:

· Locate the Landscape HUD in your inventory (search for ‘HUD’) · ‘Wear’ the HUD. It will appear in the middle at the bottom of your

screen · Click the On/Off switch (red button at the top left). In your chat window

you will get this message: ‘Touch landscape to establish connection’. · Touch (left-click) your landscape. In your chat window you will get this

message: ‘Receiving landscape data from rezzer’. After a few seconds your HUD will start and show various options.

Go to Chapter 7: ‘Operating the HUD’ to learn how to customize your landscape item.

Page 8: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

8

When you have finished your work, you can switch off the HUD by clicking the On/Off switch, the green button at the top left. The connection will close and the HUD will turn black. You are free to ‘detach’ the HUD, or go to another landscape item and start a connection there.

Page 9: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

9

6. Problems establishing a connection between the HUD and the landscape item*

You may have trouble connecting to and controlling the landscape item. In your chat window you will find one of these error messages:

· ‘Connection not allowed, you are wearing the wrong user group. Disconnect HUD, change user group and wear HUD again’ or:

· ‘HUD has wrong active user group. Please detach HUD, wear correct user group and wear HUD again’ The owner of the landscape item allows group members to connect. To do this, the HUD itself needs to be set to the same group as the landscape. Detaching the HUD, changing your user group, and then reattaching the HUD should allow you to connect again

· ‘Connection not allowed, only owner can connect to landscape rezzer’ The owner of the landscape item does not allow others to connect. Ask the owner to change the setting

· ‘Not possible to connect, resident ….. is using connection’ The landscape item can only be connected to one HUD at the same time. Wait for the other person to finish his/her work

· ‘Not possible to connect, resident ….. is using connection and you are not wearing the correct user group’ The landscape item can only be connected to one HUD at the same time. Wait for the other person to finish his/her work. Also, your HUD needs to be set to the same group as the landscape item. See instructions above

If there is no error message in your chat window, you either:

· Did not touch the landscape item. Consult chapter 2. · Did not switch on the HUD · Are not in the same region as the root prim of your landscape item

Page 10: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

10

7. Operating the HUD*

Now that you have established a connection, you can start to customize your landscape. Below you will find all available options.

1. Switch HUD on or off 2. Allow group members to customize landscape item 3. Hide landscape item. A white pyramid will become visible in the air.

Connect to this pyramid to show landscape item again. Option only available when connected to a skybox environment

4. Select different environment 5. Select different set of environments, when available 6. Select which landscape section to edit 7. Show or hide selected landscape section, when available. Primary

landscape section cannot be hidden 8. Revert textures of landscape section to default settings 9. Select surface texture for selected landscape section. Option not available

for wave, tree and reef objects

Page 11: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

11

10. Select different sets of surface textures 11. Change texture repeat factor of selected landscape section. Option not

available for baked default textures 12. Change texture brightness of selected landscape section 13. Change texture transparency of selected landscape section 14. Change texture glow of selected landscape section

The HUD has some extra functionality that is available by chat only. In order to use this extra functionality, you have to connect to your landscape item first. Select the landscape section you want to change (6). When texture panel (9) is filled with textures, you can use one of four chat commands. When texture panel (9) is black these chat commands cannot be used.

· To apply your own texture ‘/99 texture UUID‘ where UUID is the Universally Unique Identifier of your texture. You can obtain this UUID by right-clicking on the texture in your inventory and selecting ‘Copy Asset UUID’. Then paste it in your chat window (right-click, paste)

· To change texture color ‘/99 color <red_value,green_value,blue_value>’. The red, green and blue values are numerical values between 0.0 and 1.0, designating the intensity of the respective colors. Don’t forget the <> and commas! Example: ‘/99 color <0.0,0.0,1.0>’ for adding a blue color to your texture

· To turn full bright on or off ‘/99 fullbright on|off’

· To change shininess ‘/99 shininess none|low|medium|high’

Not satisfied with your adjustments? You can always revert to the default texture settings by clicking button (8).

The texture panel of the HUD (9+10) allows you to select different sets of textures. You can buy these sets on Landscapes Unlimited so you can apply them on your sim ground to make it perfectly match your environment.

Page 12: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

12

8. Issues with Mega Prims

InWorldz does not have any issues with the use of mega prims. If you happen to experience problems there, that are related to these big prims, then please contact me to see what can be done about it.

When you use a sim surround environment In Avination, however, After a few days your region will appear on the world map as one or a few single-color square(s). Skybox environments placed above 500m will not show up on the world map

Both in InWorldz and in Avination the big landscape prims may go over your neighbors’ land. They may find that an intrusion on their property. Make sure they don’t mind before you place a landscape item

Page 13: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

13

9. Exchange and Refund Policy

I want to make sure that, before you buy your landscape item, you know exactly what to expect. That’s why I offer as much information as possible, and that’s why I offer free demos of all items. Despite of all that, you may end up buying the wrong item or you may not be able to use it (anymore) the way you want. This is my policy:

· I do not refund money or take back items because of problems associated with mega prims

· I do not refund money for ‘copy’ items, and I do not exchange them for other items. In case of technical failure I will give you an improved version, when available

· I do not exchange your ‘transfer’-item for an improved version or for another item you like better

· I do exchange your ‘transfer’-item for another copy (same landscape item) in case of technical failure, for example script failure

Page 14: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

14

10. Liability

I am not liable for problems that arise from changes or bugs in InWorldz or Avination software, for example viewer and server software, or InWorldz or Avination policy changes.

Page 15: Virtual 3D Environments User Manual InWorldz & Avination - Version 2.0

15

11. Stay informed about new items and technology

On a regular basis we add new landscape items and new functionality to our collection. You can stay informed in several ways:

· Become a member of my update group, which is. Both in InWorldz and Avination, is called ‘Landscapes Unlimited – Update Group’. Use Search to find it, or read my profile

· Consult my blog: http://landscapesunlimited.blogspot.com