VFI-714 Spray Polyurethane Foam is a closed cell, two pound system. When properly installed by a skilled contractor, VFI-714 quickly expands to fill the cracks crevices, gaps and voids that exist in every structure.

Air ControlTo create an energy efficient structure you need to control the air movement. Roughly one third of the air inside a structure infiltrates through the walls, ceilings, and floors. Adding VFI-714 will help you control air leakage. When installed by an authorized contractor, VFI-714 quickly expands to fill all voids, cracks, gaps and crevices. It conforms to curves and irregular shapes to form a superior thermal envelope around your entire structure. VFI-714 provides excellent insulation while also being a vapor barrier and air barrier. Other benefits include reductions in noise, dust, pollen and pest infiltrations and significant improvements on structural racking strength of wall assemblies. VFI-714 is available in 4 different speeds.

R-ValueWhen you combine the high R-Value per inch of VFI-714 with its extremely low air infiltration properties, you achieve a thermal envelope that is superior to more traditional forms of insulation.

Reduce Heating and Cooling CostsInvestment in an insulation system like VFI-714 really pays off in energy savings. Long term energy savings can be 40% or more over traditional insulation methods. Combined with improved air quality and sound attenuation, it’s just a great value.

About Volatile Free, Inc.Headquartered in Brookfield, WI, Volatile Free, Inc. is a successful manufacturer of polyurea and silicone coatings as well as residential and commercial spray foam. Since 1995, Volatile Free, Inc.’s mission has been to produce strictly low Volatile Organic Content (VOC) products. Utilizing advanced techniques in chemistry, technology and steady company growth, demonstrates Volatile Free Inc.’s commitment to provide quality products and services. For more information contact Volatile Free, Inc. today!

VFI-714 KEY PHYSICAL PROPERTIES

R-VALUE6.6 / Inch

DENSITY2.0 PCF

AIR PERMEANCE.005L/sm2

CLOSED CELL CONTENT>96%

PRODUCT REACTIVITY

Product Designation Temperature Range

Fast (20) 20°-50°F

Mid (50) 40°-65°F

Reg (80) 55°-80°F

Slow (100) 80°-100°F

VFI®-714 Closed Cell Spray Foam Spray Polyurethane Foam 2.0lb Density IAPMO ER-415

SustainabilityDurabilityFlexibility

Superior Performance and Long Term Value• Reduce heating and cooling costs by 40% or more.

• High 6.6 R-Value per inch!

• An advanced insulation system like VFI-714 will do more than control the air leakage – when applied at 2” or greater it is both an air and vapor barrier!

• Since VFI-714 will not sag or settle, your insulating power will be maintained for the life of your structure.

• The rigid nature of closed cell foam will add significant strength to any structure.

Improve Air Quality and Overall Comfort• VFI-714 will expand to fill all those cracks and crevices to stop the air

infiltration.

• No air infiltration means those pollutants, dust, allergens, etc. will stay where they belong – OUTSIDE!

• VFI-714 will not support the growth of mold or mildew

• By controlling the air filtration you will experience a consistent comfort in your home – no more hot and cold zones!

The Environment• VFI-714 has Zero Ozone depleting blowing agents.

• Low odor and VOC formulation.

Sustainability. Durability. Flexibility with VFI• We are proud to serve our industry and community for 20 Years!

• Our products are applied by trained and authorized contractors.

• Our technical staff will provide job site hands on training for our authorized installers.

Control the Air!These are some of the many areas of a home that air will infiltrate. VFI-714 applied by one of our authorized applicators will solve these problems.

Radiant heat and cold

Roof penetrations like plumbing vent stacks and exhaust fans

Uninsulated ducts

Leaking ducts

Recessed lights

Attic hatch/stairs

Wall top plates

Window framing

Electrical wall outlets

Wall light switches

Unsealed chases between floors

Dropped soffits

Plumbing penetrations, pipe & duct runs

Band boards between floors

Fireplaces and chimneys

Sill plates

Door framing

Appliance vents

Outdoor faucets

Crawl spaces

Uninsulated basement walls

23

4

5

5

6

7

8

9 1011

12

14

15

16 17

18

192021

1

13

VFI®-714 Closed Cell Spray Foam Spray Polyurethane Foam 2.0lb Density IAPMO ER-415

SustainabilityDurabilityFlexibility

For more information, contact us today at 800-307-9218 Setting the standard for Renewable Coatings and Spray Foams

Corporate Office: P.O. Box 344 • Brookfield, WI 53008 • (800)307-9218 • (262)787-0400 • Fax (262)787-0500 • www.volatilefree.comThis information and technical advice provided herein are believed to be reliable and accurate to the best knowledge of Volatile Free, Inc., As based on tests and should serve only as a recommendation. As the manufacturer, Volatile Free, Inc makes no representations or warranties of any kind, expressed, implied or statutory, including but not limited to all implied warranties of merchantability or fitness for use or a particular purpose, or any other matter with respect to this product. Volatile Free, Inc makes no representations or warranties as to the results of the use of the product and assumes no obligation or liability in connection therewith. Volatile Free, Inc is not liable for any special, exemplary, punitive, incidental or consequential damages of any sort or kind from use of this product. The information provided herein is subject to change at any time without notice. Information changes may include, but are not limited to, commercial and technical changes, changes in pricing, physical characteristics and packaging.