Embed Size (px)
Citation preview
CombiSumpVertical long shaft sump pump,according to
ISO 2858,EN 733 (DIN 24255), API 610
CombiSumpCombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump’s Combi-system, a modular programme of single stage centrifugal pumps with a high degree of interchangeability of parts between the different pump constructions.
Max. capacity 1500 m3/h
Max. head 160 m
Max. temperature 160°C
Max. speed 3600 rpm
Design pressure up to 16 (35) bar
The CombiSump is a range of centrifugal
sump pumps, with the pump casing
submerged into the liquid and a dry motor
construction.
The hydraulic parts of these submersible
pumps make use of the pump casings and
impellers of the CombiPro, CombiChem
or CombiNorm pumps, their respective
hydraulic fields meeting API 610, ISO 2858
(EN 22858 / DIN 24256) and EN 733
(DIN 24255).
The pump is driven by a customer specified
or standard IEC flange electric motor
‘V1(IM3011)’ placed on a lantern piece
mounted on the base plate. The power is
transmitted through a flexible coupling and a
long shaft.
The pump casings’ pressure flange is
connected to a discharge connection on the
base plate.
Technical data
Off Shore
Petrochemical industry
General industryCombiSump pumps can be used for all kinds of sump duties. Another known application is pumping cooling water when river or lake water is used for chilled cooling water processes.
CombiSump pumps are often used for draining waste water collecting bassins. Typical process duties are e.g. drain pump or hydrocarbon condensate.
In Off Shore industries CombiSump pumps are used for several duties where it is desireable to have the electric motor at distance of the pumped liquid.
From know-how to finding solutions
Electric motor• mountedonasteelmademotorsupport
lantern piece• accuratealignmentbymeansofadjusting
bolts• customerspecifiedorstandardIECflangemotor‘V1(IM3011)’
Column pipe and pump shaft• situatedbelowthebaseplate• consistingofoneormoreparts• connectsthepumpcasingwiththe
baseplate• columnpipeprotectstheshaft• supportstheeventualintermediate
bearings• sumpdepthaccordingtocustomerspecification
• designconsistsof4shaftgroups
Pump casing/impeller• impellerdesignforlowNPSHvalues• availableimpellertypes:closedimpeller, half open impeller with wear plate and vortex impeller• anti-rotationdeviceatimpellerinlet• suction strainer• optimisedhydraulicperformance• suitableforawiderangeofliquids• impellerprotectedfromclogging
Delivery connection • placedonthebaseplate• flangesaccordingtoISO7005PN16,
PN 20, PN 50• flangesaccordingtoANSIB16.5150lbs,
300 lbs• horizontalorverticalpositionpossible
Baseplate • standardversionisarectangularplate• roundflangeshapedplateisoptional
(API 610)• canbeadaptedtothesizeofthepitaccordingtocustomerspecifications
• liftinglugsforeasymaintenance• providedwithearthingboss
Coupling• standardfittedwithflexiblecoupling• optionallyavailablewithmembranecoupling
or non-sparking coupling• couplingguardtoprevententrancetothe
rotating parts
Features and benefits
Benefits• Availableinseveralmaterials• Highpumpefficiency• Suitedforawidespanofduties• Easymaintenance• Compact,spacesavingconstruction• Lowmaintenancecost• Designedtomeetspecificlengthsandapplication
requirements• Baseplatedesignedtomeetexistingsupport
arrangements
Slide bearings• pumpshaftprovidedwithslidebearings• numberofslidebearingsdependingonthe
length of the pump shaft• ceramicbearings,liquidlubricated
Bearings
The ‘dry’ part of the pump is provided with a double-row angular-contact ball bearing (two single row angular-contact ball bearings for bearing group 4) for bearing the axial loads of the pump shaft. The shaft of the ‘wet’ part of the pump is provided with liquid lubricated slide bearings. The liquid is supplied directly from the discharge nozzle of the pump casing.
Ball bearing construction• double-rowangular-contactballbearingfor
axial loads on the pump shaft.• greaselubricated
Standard the baseplate is provided with an oil baffle for sealing the shaft passage. For pressure tank applications a mechanical seal or gland packing is optionally available. On request a hermetically sealed shaft sealing solution can be supplied by mounting a mag drive coupling.
Impeller types The standard impeller is a closed impeller, but for contaminated liquids, containing fibres, a half open impeller or a vortex impeller is available on request.
Shaft sealing
Materials Parts Standard available materials
Pump casing stainless steel cast steel cast iron
Impeller stainless steel bronze cast iron
Shaft stainless steel bearinggroup4:steel
Stand pipe stainless steel steel
Delivery pipe stainless steel steel
Slide bearings SiC-SiC
Closed impeller Half open impeller Vortex impeller
Alternativematerialsaccordingtocustomerspecifications.
Q [m3/h]
H[m]
2
65
7
30
20
40
10
8
103 30 404 20 60 80 100 500200 300
4
50
3
4005 6 8
40-125
40-160
40-200
50-125
50-160
65-125
65-160 80-160
50-20065-200
100-400
100-200
125-125
200-200
150-160
150-125
7
9
32-125
32-160
32-200
32-250 40-250
40-315
50-250
50-315
65-250
65-315
80-25080-315
80-400
80-200
100-1
60
100-125
125-315
125-400
125-500
150-400150-500
150B-40
0
150-3
15
150-250125-250100-250
100-3
15
250-200200-250
200-315
250-250300-250
300-315250-315
200-400
506070
90
9 70 1500700 1000
150-200
Q [m3/h]
H[m]
65
7
30
20
40
10
8
103 30 404 20 60 80 100 500200 300
4
503
4005 6 8
40-125
40-160
40-200
50-125
50-160
65-125
65-160 80-160
50-200 65-200
100-400
100-200
125-125
200-200
150-200
150-160
150-125
7
9
32-125
32-160
32-200
32-250 40-250
40-315
50-250
50-315
65-250
65-315
80-250
80-315
80-400
80-200
100-1
60
100-125
125-315
125-400 150B-400
150-250125-250100-250
100-3
15
250-200
200-250
200-315250-315
506070
9 70 700 1000
90
Q [m3/h]
H[m]
30
20
40
1010 30 4020 60 80 100 200 30050 4008
40-125
40-160
40-200
50-125
50-160
65-125
65-160 80-160
50-20065-200
32-125
32-160
32-200
32-250 40-250 50-250 65-250
80-200
100-160100-125
50
6070
90
9 70
80
100
150
200
Q [m3/h]
H[m]
30
20
40
10
810 30 4020 60 80 100 200 30050 4008
40-125
40-160
40-200
50-125
50-160
65-125
65-160 80-160
50-20065-200
100-200
9
32-125
32-160
32-200
32-250 40-250
40-315
50-250
50-315
65-250
65-315
80-250
80-315
80-200
100-160100-125
100-250
50
6070
90
9 70
80
100110
150
200
Performance overview
nnom=1500rpm
nnom=1800rpm
nnom=3000rpm nnom=3600rpm
Yourlocalcontact:
SPXProcessEquipmentNLB.V.DrA.F.Philipsweg51,P.O.Box9NL-9400AAAssen,NETHERLANDSPhone:+31(0)592376767.Fax:+31(0)592376760E-Mail:[email protected]
For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.johnson-pump.comandwww.spxpe.com.
SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation.Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing.
Issued:05/2008 Copyright©2008SPXCorporation
SPX Process Equipment Ltd. Sales office Johnson Pump BrandMeadowBrookIndustrialCentreMaxwell Way, CrawleyWestSussexRH109SAUnited Kingdom
Tel.01293-553495Fax01293-524635johnson-pump.uk@processequipment.spx.comwww.johnson-pump.com/UK
JP-CS-EN
