Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade DESY MKS-2

Version 5.0 to Version 10.2 Version 5.0 to Version 10.2 Hardware-, Software- and Hardware-, Software- and

Prozess-UpgradeProzess-Upgrade

DESY MKS-2

Versions 5 to 10.2 Hardware Upgrade

HardwareHardware

• Hardware Upgrade Overview

• Was ist Kompatibel?

• Version 5 to 10.2

• Micro Chassis

• I/O Families

• Kabel


AusführungAusführung

• Was muß geändert werden ?

• Version 5 to Version 10.2 – All PCMs

• Micro Chassis


VoraussetzungenVoraussetzungen

• What are the PC Requirements?

• Version 10 and up

• Operating System

• Software

• What Networking Changes are Required?

• Version 9 and Version 10 to 11

• For the PCM

• For the PC


Was ist Kompatiebel?

• Version 5 to Version 10.2 • T386/486, and Pentium 586 CPU boards

• Ethernet link 0 and link 1 Cards

• UTB - Utility Board - No Change

• PSA - Process Select Assembly - No Change

• RLink Token Ring Card is NOT supported with V10

PCMI DCMPCMII

CDCMPCMIII

PCM2000OCM

PVNPVX? ?

??

????

?


• All previously supported I/O families are still supported

• 16000

• GPXIO

• Siemens 505 Remote

• Modicon Remote

• Modicon Quantum

• Quantum High Density

• Modbus +

• A-B Data Highway +

Data Highway+

Modbus +

Modicon

P810

Modicon

J890

Modicon

BXXX

Modicon

BXXX

Modicon

BXXX

Modicon

BXXX

S908

AB I/O

CDCM

Redundant TCP/IP Ethernet Communications

Siemens I/O

PLC 5/40

Modicon PLC

Windows NT Display NodeMulti-Monitor Console

PCM 2000

PCM 2000

Operator Workstation


PCM 4100


• I/O Family Additions

• Version 10.1

• Redundant Profibus

• Multiple 505 I/O Redundancy Schemes

• Version 10.2

• Redundant /Non Redundant ControlNetTM

• Foundation Fieldbus Connectivity

• Through

• OPC

• Modbus

• Controlnet

H1

PLC 5/40

1771 I/O

PCM

D/3 HybridProcess Controllers

Redundant TCP/IP Ethernet Communications

CDCM


PCM 4100


• Version 5 to Version 10.2 I/O Families

• PIO Multibus 16000 I/O Board No Change

• Intel 544 Multibus GPXIO Board No Change

• Intel 86/35 GPXIO Board No Change

Was muß geändert werden ?


• Version 5 to Version 10.2 - I/O Families

• SST Multibus Modbus+ Board No Change

• SST Multibus Data Highway+ Board No Change

• SST Multibus Profibus Board No Change

• SST Multibus ControlNet Board No Change

• Rockwell Multibus ControlNet Board No Change



• Version 5 to Version 10.2 - I/O Families

• NEW ISA PIO Card

• NEW PCI MRIOC Card

• NEW PCI Modbus Plus Card

• NEW PCI Data Highway Plus Card

• NEW PCI Profibus Card

• NEW PCI ControlNet Card



• Micro Chassis CPU - Version 5 zu Version 10.2

• 386/486 CPU cards require upgrade of

SBoot PROM

• Patapsco, Interlan or IDEA Ethernet Cards

used for Link0 and Link1

• IDEA card recommended for RLINK

(3 Jumper settings)

• 40 - Link E0

• 60 - Link E1

• 50 - R-Link

• Crossover Cable used for RLink


PROMs



• Micro Chassis CPU - Version 5.0 to Version 10.2

• Replace 4 Boards with 1

• The 586 Pentium CPU and MFDC

(Multi Function Daughter Card)

• PROM upgrade required

• Included on the MFDC are

• 3 Independent Ethernet ports for:

• R-Link

• E1

• E0

• One 3-port parallel connector

• To connect to a PCMI/PCMII UTB

RLink

E1

E0


Was muß geändert werden ?• MRIOC Board - Version 5 zu Version

10.2• Prom Upgrade

• Standard I/O Modules V5 - V10.2

• Hi Density I/O Modules V10.1 - V10.2PROM



• Micro Chassis - Version 5.0 to Version 10.2

• New 4 Slot PICMG Backplane Holds:

• 886 ROBO-678-GSE PICMG CPU

• On-board Ethernet Link 0, Link 1 and R-Link

• Up to 3 of the 6 I/O Controller Boards

• New IUA (Intelligent Utility Assembly)

• SSB (Status Supervisory Board)

• SMB (Status Monitor Board)

• New MSA (Micro Select Assembly)


Was sind die PC Voraussetzungen?

• CDCM Minimum Requirements• Operating System

• 600MHZ Pentium• 256 MB RAM• 8+ MB Video RAM

• TotalVision™, InstAlarm™, & Trending

• 20 GB Hard Disk

• Software• Windows 2000 Server with Client

Access Licenses

• Internet Explorer 5.0

• Optional Office 2000 for MDL Excel


Was sind die PC Voraussetzungen ?

• DCM Minimum Requirements V10+• Operating System

• 450MHZ Pentium• 256 MB RAM• 8+ MB Video RAM• 9 GB Hard Disk

• Software V10+• Windows 2000 Server with Client

Access Licenses


Was sind die PC Voraussetzungen?

• OCM Minimum Requirements V10+• Operating System

• 400MHZ Pentium• 128 MB RAM• 8 MB Video RAM• 4 GB Hard Disk

• Software V10+• Windows 2000 Professional


Welche Netzwerkänderungen sind notwendig

• For the PCM V5 to V 10.2• Along with the E-net Card MAC Address, each PCM now has a

TCP/IP Address• D/3 should be on a separate network• DHCP or Server assigned IP addresses NOT supported. Addresses

must be loaded at DCM node and in WinCOD• Should be connected to other facility networks through routers• DCMs and OCMs communicate at 100Mbps• PCM has optional 100Mbps Full Duplex communication• Loaded to the PCM automatically

• When the PCM and CDCM are both booted the CDCM establishes PCM communication through the MAC Address and transmits the Ethernet address to the PCM.

• Each Mac address (E0 & E1) will need a TCP/IP address• E0 & E1 TCP/IP addresses must be on different subnets


Welche Netzwerkänderungen sind notwendig

• For the PC 10.2• Determine number and names of Nodes (C/DCMs)

• Setup Nodes in WinCOD• Network address for the PC (Network Neighborhood) and that

node in WinCOD must match.

• Node License• Loaded on a specific Node

• Linked to a MAC address or Sentinel

• Floating License• Loaded on License Server

• Served to users on 1st come 1st served basis

Documents

Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade DESY MKS-2