Vernier Calipers MIB Messzeuge Germany Precision ... ... Precision vernier caliper with screw lock DIN

  • View
    3

  • Download
    0

Embed Size (px)

Text of Vernier Calipers MIB Messzeuge Germany Precision ... ... Precision vernier caliper with screw lock...

  • Measuring tools

    Vernier Calipers MIB Messzeuge Germany

    Precision micrometers

    Dial indicators

    Dial supports

    Magnetic dial supports

    Digital thickness gauges

    Precision inside micrometers

    Vernier caliper standard model

    Satin chrome finish, hardened.

    4-way measurements.

    Backside Metric ISO and Withworth screw table.

    Automatic lock.

    In case.

    Number Description

    330400 150 mm range nonius mm/inch

    330402 200 mm range nonius mm/inch

    Vernier caliper standard model

    Satin chrome finish, hardened.

    4-way measurements.

    Backside Metric ISO and Withworth screw table.

    Screw lock.

    In case.

    Number Description

    330416 150 mm range nonius mm/inch

    330417 200 mm range nonius mm/inch

    Precision vernier caliper with screw lock DIN 862

    Made of stainless steel, satin chrome finish, hardened.

    4-way measurements.

    Backside Metric ISO and Withworth screw table.

    Nonius above 1/20-39, nonius blow 1/128"

    In case.

    Number Description

    330410 150 mm range nonius mm/inch

    330412 200 mm range nonius mm/inch

    330414 300 mm range nonius mm/inch

    Precision vernier caliper with screw lock DIN 862

    Made of stainless steel, satin chrome finish, hardened.

    4-way measurements.

    Backside Metric ISO and Withworth screw table.

    Nonius above 1/50-49, nonius below 1/1000"

    In case.

    Number Description

    330410 150 mm range nonius mm/inch

    330412 200 mm range nonius mm/inch

    330414 300 mm range nonius mm/inch

    Precision vernier caliper with fine adjustment

    With fine adjustment and lock screw.

    Satin chrome finished, hardened with depth gauge.

    4-way measurement.

    In case.

    Number Description

    330418 200 mm range nonius mm/inch

    330419 300 mm range nonius mm/inch

    Top

    Pag. 00/08

  • Precision vernier caliper with set screw TOP DIN 862

    With lock set screw.

    Made of stainless steel satin chrome finish, hardened.

    4-way measurement.

    With higher sliderails.

    Backside Metric ISO and Withworth screw table.

    Nonius above 1/20-39, nonius below 1/128"

    In case.

    Number Description

    330190 150 mm range nonius mm/inch

    330192 200 mm range nonius mm/inch

    330193 300 mm range nonius mm/inch

    Vernier caliper brass DIN 862

    Non magnetic, special developed for measuring

    at heavy magnetic areas or magnetic

    workpieces.

    With lock screw.

    In case.

    Number Description

    330195 150 mm range nonius mm/inch

    Dial caliper shockproof DIN 862

    Made of stainless steel, hardened.

    4-way measuring. MM/INCH

    Backside Metric ISO and Withworth screw table.

    Reading 0,02 mm 1x round 2 mm.

    In case.

    Number Description

    330300 150 mm jaw 40 / 20 mm

    330302 200 mm jaw 50 / 24 mm

    330304 300 mm jaw 60 / 25 mm

    Dial caliper shockproof DIN 862

    As type above only difference is the reading.

    Reading 0,01 mm 1x round 1 mm.

    Number Description

    330301 150 mm jaw 40 / 20 mm

    330303 200 mm jaw 50 / 24 mm

    330305 300 mm jaw 60 / 25 mm

    Vernier caliper fiberglass plastic Wiha CaliMax

    Non-metal high-tech material with 50%

    fiberglass. Reading 0,1 mm / 1/64".

    Green/white reading at the nonius.

    Number Description

    330400P 150 mm jaw 40 / 20 mm

    Digital vernier caliper with data output DIN 862

    Made of stainless steel, hardened.

    4-way measuring. MM/INCH

    Reading 0,01 mm or 0,0005".

    Accuracy 0,03 mm

    On/Off function, MM/INCH unit.

    In plastic case.

    Data exit RB 2

    Battery 1,5V V357 (number 330200)

    Number Description

    330420 150 mm jaw 40 / 21 mm

    00-08.1

  • Digital vernier caliper with Bluetooth IP67 DIN 862

    Inductive measuring systeem

    IP 67 protection, water and dust proof.

    Made of stainless steel, hardened.

    4-way measuring. MM/INCH

    Reading 0,01 mm or 0,0005".

    Accuracy 0,03 mm

    On/Off function, MM/INCH unit.

    In plastic case.

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330310 150 mm jaw 40 / 21 mm

    330311 200 mm jaw 50 / 24 mm

    330312 300 mm jaw 60 / 26 mm

    330313 150 mm jaw 40 / 21 mm

    With Ø1,6 mm round depth bar.

    Digital vernier caliper with carbide measuring faces IP 67 DIN 862

    Equiped with a Sylvac-Electronic measuring unit.

    Carbide measuring faces.

    IP 67 protection, water and dust proof.

    Made of stainless steel, hardened.

    4-way measuring. MM/INCH

    Reading 0,01 mm or 0,0005".

    Accuracy 0,03 mm

    On/Off function, MM/INCH unit.

    ABS Function

    In plastic case.

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330315 150 mm jaw 40 / 21 mm

    330316 200 mm jaw 50 / 24 mm

    330317 300 mm jaw 60 / 26 mm

    Digital vernier caliper Non Magnetic DIN 862

    Made of stainless non magnetic steel.

    With round Ø3 mm depth bar.

    4-way measuring. MM/INCH

    Reading 0,01 mm or 0,0005".

    Accuracy 0,03 mm

    On/Off function, MM/INCH unit.

    HOLD Function.

    Data-exit RB 5

    In plastic case.

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330330 150 mm jaw 40 / 21 mm

    330331 200 mm jaw 50 / 24 mm

    330332 300 mm jaw 60 / 26 mm

    Digital vernier caliper IP 54 Absolute-System DIN 862

    No limit for moving tempo.

    Scale with glass rail for precision sampling.

    Usable without roll (fitting included).

    4-way measuring. MM/INCH

    On/Off function, MM/INCH unit.

    HOLD Function, Absolut-system

    Accuracy 150 & 200 mm 0,02 mm

    and at 300 mm 0,03 mm. Data-exit RB 6

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330423 150 mm jaw 40 / 21 mm Bluetooth data zender optioneel.

    330424 200 mm jaw 50 / 24 mm

    330425 300 mm jaw 60 / 26 mm Top 00-08.2

  • Digital steel wire vernier caliper.

    Special caliper with large-sized measuring faces.

    Made of stainless steel, hardened and with

    metal casing.

    Reading 0,01 mm or 0,0005".

    Accuracy 0,03 mm

    On/Off function, MM/INCH unit.

    HOLD Function.

    Data-exit RB 5

    In case.

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330350 150 mm

    a = 27 mm

    b = 25 mm

    d = 16 mm

    Control caliper standard version DIN 862

    Made of stainless steel.

    Scale and nonius satin chrome finish.

    With 10 mm points.

    Monoblock type.

    Reading 0,05 mm + 1/128"

    In wooden case.

    Number Description

    330428 200 mm jaw 60 / 40 mm

    330429 250 mm jaw 80 / 40 mm

    330430 300 mm jaw 100 / 40 mm

    Control caliper with fine adjustment DIN 862

    Made of stainless steel.

    Scale and nonius satin chrome finish.

    With 10 mm points.

    Monoblock type.

    Reading 0,05 mm + 1/128"

    In wooden case.

    Number Description

    330900 200 mm jaw 60 / 40 mm

    330901 250 mm jaw 80 / 40 mm

    330902 300 mm jaw 100 / 40 mm

    Control caliper with fine adjustment

    Without points.

    Made of stainless steel.

    Scale and nonius satin chrome finish.

    With fine adjustment and lock screw.

    Works standard. In transport box.

    Reading 1/20 = 0,05 or 1/50 = 0,02 (330916)

    Number Description

    330915 500 mm jaw 90 mm

    330916 500 mm jaw 90 mm

    330917 500 mm jaw 150 mm

    330918 1000 mm jaw 120 mm

    330919 1000 mm jaw 150 mm

    330920 1500 mm jaw 200 mm

    330921 2000 mm jaw 200 mm

    All DIN control calipers can be supplied optional (additional cost) with a certificate.

    The DIN version will be certified according to VDI/VDE/DGQ 2618 norm.

    Works standard control calipers can be certified according to the works standard.

    Calibration will be done external and will extend lead time with approx. one week.

    00-08.3

  • Digital control caliper with fine adjustment.

    Without points. Accuracy 0,03 mm.

    Made of stainless steel, hardened.

    With fine adjustment and screw lock.

    Works standard. In transport box.

    Reading 0,01 mm + 0,0005"

    On/Off function, MM/INCH unit.

    HOLD Function. Data exit RB 5

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330930 200 mm jaw 75 mm

    330931 300 mm jaw 90 mm

    Digital control caliper with fine adjustment.

    With points. Accuracy 0,03 mm.

    Made of stainless steel, hardened.

    With fine adjustment and screw lock.

    Works standard. In transport box.

    Reading 0,01 mm + 0,0005"

    On/Off function, MM/INCH unit.

    HOLD Function. Data exit RB 5

    Battery 3V CR 2032 (number 7702469)

    Number Description

    330935 300 mm jaw 60 / 38 mm

    330936 300 mm jaw 90 / 45 mm

    Digital control caliper with fine adjustment IP66

    With magnetic measuring system. Fine adjustment.

    IP 66 protection. Water and dust proof.

    Made of stainless steel, hardened.

    Works standard. In transport box.

    Reading 0,01 mm + 0,0005"

    On/Off function, MM