Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,
Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,
Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,
Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,
Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,

Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah blinds,

  • View
    4

  • Download
    0

Embed Size (px)

Text of Verandah blinds 2013 - Nepean Blinds Verandah Blinds / Straight Drop Awnings Overview Verandah...

  • Cafe Blinds

  • Veran dah

    B lin

    ds

    Verandah Blinds / Straight Drop Awnings

    Overview

    Verandah blinds, also known as Straight Drop awnings, are made in three types - fixed timber top batten, spring top roller and gearbox driven. Hoods can be added and the fixed timber type will need a pulley kit.

    Measuring a verandah blind is pretty simple - you just need width and drop. However care needs to be taken to select the method of installation and tie downs carefully at time of order as this will affect the drop length of blind.

    Measuring

    Specify ground clearance. 300mm min for this type of strap and 150mm for over roll strap.

    Height of opening

    add 50mm if ceiling mounting

    head board

    Meas ure w

    idth

    - batten top

    A pulley kit is supplied fitted with this blind. Please specify control side for the pulley kit by considering the blind as if you are facing the operating side of the blind.

  • Veran dah

    B lin

    ds Verandah Blinds / Straight Drop Awnings

    Meas ure w

    idth t o out

    side o f brac

    kets

    Height of opening

    Measuring - spring or gear box

    Measuring a verandah blind is pretty simple - you just need width and drop. A gear box blind will need a crank handle - a good rule of thumb for selecting a crank handle is drop - 1500mm and then select the next longest crank handle.

    Specify ground clearance. 300mm min for this type of strap and 150mm for over roll strap.

  • Veran dah

    blin ds

    Verandah Blinds / Straight Drop Awnings

    Tie down straps

    Strap Adaptor Standard fixing for Spring Operation

    Breeching staples and straps are another option.

    Specify the distance between straps for breeching staple straps.

    Install a cellar lift or saddles for attaching the dog clips.

    These are the most common bottom fixing and tie down strap types. Specify which strap type you would like on your order.

    Double Dog Clip Standard fixing for Crank Operation

    Optional Breeching Staple

    and Strap

  • Veran dah

    B lin

    ds Verandah Blinds / Straight Drop Awnings

    Installing

    Installing the Roller Tube Assembly - spring operated blinds

    The spring in the roller tube has been pre-tensioned in the factory. Place the assembly into the brackets of the headbox or brackets.

    NOTE: For over roll the spade and pawl should be on the right. For under roll they should be on the left. Ensure pawl is on the bottom.

    Pulling down on the bottom rail releases the pawl. Check to ensure enough tension has been placed on the spring.

    To increase tension pull awning down about600mm, lock pawl into place and lift out. On the pawl and spade end, roll one full turn and replace, check tension.

    To decrease tension do the opposite.

    install with Pawl at the bottom.

    Pull the cloth and the Pawl will release.

    Phone: 02 4722 4000 Email: sales@nepeanblinds.com.au Website: www.nepeanblinds.com.au

    Page 1 Page 2 Page 3 Page 4 Page 5