VEHICLE CLASS sssssssssssssssssssssssssssss Two Postcjmcomp.com/pdf/Rotary Two Post_Aboveground Lifts.pdf · True Asymmetrical Lifts 7,000 to 10,000 lbs. capacities (SPOA/A series)

Lit# Rotary_2Post Brochure_2015.01

©2015 VEHICLE SERVICE GROUPSM, Printed in U.S.A., All Rights Reserved. Unless otherwise indicated, ROTARY LIFT, VEHICLE SERVICE GROUPSM, DOVERand all other trademarks are property of Dover Corporation and its affiliates.

For more information and a complete guide to our product offering, visit us on the web at rotarylift.com or contact your local distributor today.

World Wide Contact InformationWorld Headquarters / USA: 1.812.273.1622 Canada: 1.905.812.9920 European Headquarters / Germany: +49.771.9233.0 United Kingdom: +44.178.747.7711 Australasia: +60.3.5192.5910 Latin America / Caribbean: 1.812.273.1622 Middle East / Northern Africa: +49.771.9233.0Southern Africa: 1.812.273.1622Brazil: +55.11.4534.1995

Rotary World Headquarters2700 Lanier Drive Madison, IN 47250, USA

Contact us for training sessions in your area or online.

GS07F8953D

CLASS 833,001 lbs. and over GVW

CLASS 1Under 6,000 lbs. GVW

CLASS 26,001 to 10,000 lbs. GVW






60,

000

lbs.

70,

000

lbs.

90,

000

lbs.

105,

000

lbs.

6,0

00 lb

s.

7,0

00 lb

s.

10,0

00 lb

s.

8,0

00 lb

s.

10,0

00 lb

s.

12,0

00 lb

s.

7,0

00 lb

s.

10,0

00 lb

s.

12,0

00 lb

s.

15,0

00 lb

s.

18,0

00 lb

s.

LOW / MID RISE

INGROUND SMARTLIFT

TWO POST SURFACE

12,0

00 lb

s.

14,0

00 lb

s.

18,0

00 lb

s.30

,000

lbs.

40,0

00 lb

s.50

,000

lbs.

60,0

00 lb

s.

DRIVE-ON / FOUR POST & Y-LIFT

52,

000

lbs.

7

2,00

0 lb

s.

78,

000

lbs.

108,

000

lbs.

144,

000

lbs.

MOBILE COLUMNS

30,

000

lbs.

3

6,00

0 lb

s.

45,

000

lbs.

50,

000

lbs.

7

5,00

0 lb

s.10

0,00

0 lb

s.

PARALLELOGRAM

MODULAR / INGROUND& SCISSOR

INGROUND

VEHICLECLASS

GVW: Gross Vehicle Weight

LIFT APPLICATION GUIDE

NOTE: This reference guide indicates that the noted lift is applicable to the vehicle based on typical vehicle weights, lengths and wheelbases. All information should be verified before purchasing a lift.

North America Contact InformationSales: p 800.640.5438 f 800.578.5438 e [email protected] Tech. Support: p 800.445.5438 e [email protected]

www.rotarylift.com

T FTROTARY LIFT

Two PostLIGHT DUTY / HEAVY DUTY LIFTSLIGHT DUTY / HEAVY DUTY LIFTS

Available with SHOCKWAVE TM

7,000 TO 18,000 LBS. CAPACITY

Shown: SPOA10U5G5RD 10,000 lbs. capacity SHOCKWAVE equipped asymmetric two-post lift

True Asymmetrical Lifts

7,000 to 10,000 lbs. capacities (SPOA/A series)

Columns are rotated 30°allowing maximum door opening on passenger cars for improved access to vehicle interior.

Places the approximate center of gravity of the vehicle in line with the optimum load capability of the column

Asymmetrical column orientation

True Symmetrical Lifts 7,000 to 18,000 lbs. capacities (SPO/S series)

Lift columns are not rotated providing more width between columns to accommodate larger vehicles and improve vehicle access - allows max door opening on trucks and vans for improved access to vehicle interior

Vehicle load is centered between the columns to maximize lifting capacity

Symmetrical column orientation

Column Orientation Options

ROTARY LIFT TWO-POST LIFTS

ROTARY TWO-POST LIFTS:ENGINEERED FOR PRODUCTIVITYVehicles come in many different shapes and sizes. So do service centers. Rotary light and heavy duty two-post car and truck lifts are packed with design features you need to be productive, no matter what type of shop you have. With lifting capabilities from 7,000 lbs. to 18,000 lbs., there is a perfect lift combination for any shop bay. And two-post lifts equipped with optional supercharged SHOCKWAVE power are the fastest in the world, helping you keep step with the ever-changing demand of the vehicle service industry. Faster productivity equals greater profits per bay, every day.

R

es.

Model shown: SPOA10U5G5RD10,000 lbs. capacity SHOCKWAVE equipped asymmetric lift

True7,000Lift cowidthvehicl max im

Model shown: SPO12N7T0BL12,000 lbs. capacity symmetric lift

PEACE OF MIND. STANDARD WITH EVERY TWO-POST LIFT.For 90 years, Rotary® has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality and reliability throughout the automotive service market. Our designers and engineers have developed the most innovative and versatile lift products on the market today. You can trust that Rotary’s rigorously cycle-tested lifts set the bar for durability and attention to safety for years of dependable income production. It’s the kind of investment that pays for itself quickly, and then gives a boost to your bottom line - every day you do business.

Commitment to innovation and safetyRotary Lift continues to lead the industry in the manufacturing of lifts in an ISO9001-certified facility, with each lift designed to meet applicable ANSI standards. Rotary two-post lifts are third party tested by ETL and certified by ALI to meet or exceed strict ANSI standards. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.

Local Service and SupportWith Rotary, you have the service and support you need. Our sales force attends intensive training on our products and the issues that face service repair facilities and can help you evaluate which lift best meets your needs. Our world-wide network of service com-panies - the industry’s most extensive network of factory-trained professionals for specification, installation, parts and service - are always standing by.

All from a partner you’ve trusted since 1925.

Rotary Lift.

SHOCKWAVE-equipped lifts are the fast-est in the world. Twice as fast as standard lifts increasing productivity and profits.

Conventional power configuration fea-tures a convenient column location and easy-to-use two-hand operation with a manual release locking system. Increase the speed of the lift with an optional 3-phase power unit.

Slider block bearings of Tivar® 1000 polyethylene are self-lubricating and main-tenance free.

Three-stage arms increase overall arm sweep and minimum arm reach to precisely lift vehicles that have uni-body construction, a wider vehicle treadwidth, a lower profile or a short or long wheelbase.

Arm restraints make positioning of arms easy. They engage when the lift is raised and automatically disengage when the lift is fully lowered.

Rotary® power units are designed, tested and built by Rotary. We don’t use 3rd party power units which are for universal applications.

Exclusive Features and Benefits

Vehicle Contact ConfigurationsStandard three-position flip-up adapters are great for quick positioning on a variety of pick-up points. Multiple auxiliary adapters are available.

Round polymer adapters come standard with asymmetric RA models that thread-up or have optional stackable inserts. No metal to metal contact.

Fixed moveable pad contact lifts are optimal for quick vehicle spotting. This is the perfect lift for a quick-lube bay.

Polymer truck adapters that thread-up or have optional stackable inserts come standard with 10,000 - 12,000 lbs. capacity TA models.

No metal to metal contact.

High-pressure cylinders in each column provide maximum lifting force and smooth operation.

Adjustable height options on two-post column extensions gives you flexibility to lift and service taller vehicles.

Multi position locking system engages every 4”and is fully accessible for maintenance.

Multiple contact / adapter options. From standard three-position flip-up adapters, stackable adapters with thread-up adjust-ments and drive-over fixed pad contact, there is a perfect combination to choose from when spotting vehicles.

Overhead cables and a clear floor design insures proper equalization of the carriages, while providing an unobstructed floor.

Overhead padded switch bar to prevent damaging a vehicle by raising it too high.

Three position wheel spotting dishes provide more accurate positioning for a variety of vehicles.

d contact uick

Stackable adapters with thread-up adjustment come standard on 15,000 to 18,000 lbs. capacity lifts.

Stackable adapters are specifically designed for easy use. Standard on 12,000 lbs. capacity lifts.

SHOCKWAVETM

Shockwave’s DC patent pending power system gives you lower cost and more reliable operation while using two standard Group 24 batteries.**

Shockwave’s built in battery charger uses 110v power, eliminating the need for expensive 220v wiring resulting in an installation savings of 80% or more!

SUPERCHARGE YOUR LIFT WITHDELIVERING PRODUCTIVITY and PERFORMANCE

The Industry Standard JUST GOT FASTER!

SHOCKWAVE-EQUIPPED LIFTS FEATURE

2X Faster rise and descent than standard two-post lifts*

Brent Ross, Service Director, Germain Nissan

“We can get them (vehicles) up in the air and spend more time on

their inspection which is the most important portion of our service.

It’s amazing how much faster we can service vehicles.“

MAKE YOUR TWO-POST LIFT 2X FASTER

Accelerate your productivity immediately!

Increase your number of service orders per bay!

Added productivity equals EXTRA PROFIT!

*Actual rise and descent times may vary depending on weight of the vehicle. **Batteries not included

SHOCKWAVE IS AVAILABLE ON SPOA10 / SPO10 / SPO12 SERIES OF LIFTS

25 second rise time! 19 second descent!*

SHOCKWAVE’S PATENT PENDING DC POWER SYSTEM GIVES YOU

LOWER COST; MORE RELIABLE OPERATION.

DC power is environmentally friendly

TM

EQUIP YOUR LIFT WITH THE PATENT PENDING PAD / ARM HYBRID SUPERSTRUCTURE, ULTRA-LOW PROFILE MOVEABLE DRIVE-OVER PADS OR CHOOSE BETWEEN TWO STANDARD ARM PACKAGES TO PICK UP A WIDE VARIETY OF VEHICLES.

SHOCKWAVE’S INCREASED 3” RISE HEIGHT PROVIDES ADDITIONAL HEADROOM AND WORKSPACE FOR YOUR TECHNICIANS.

More productivity makes happier technicians

Greatly reduces spotting time by shooting a green laser line down the center of the bay and on to the vehicle’s hood and dash - when you center the vehicle on the line, you’re right where you need to be for a quick lift.

SpotlineTM motion activated laser helps spot vehicles the first time!SPOTTING A VEHICLE ISN’T ALWAYS EASY. THE PATENT PENDING SPOTLINE LASER SYSTEM HELPS CENTER CARS IN THE BAY ACCURATELY.

Only SHOCKWAVE-equipped lifts give you a choice of lift superstructures to match your shop’s needs.

Shown: SPOA10U5G5RD 10,000 lbs. capacity SHOCKWAVE equipped asymmetric lift

Patent pending DC power

Operates during

power loss

Shown: SPOA10U5G5RD10,000 lbs. capacity SHOCKWAVE equipped asymmetric lift

SHOCKWAVE Two-Post

DESIGN ADVANTAGE

PRODUCTIVITY & PERFORMANCE

1. PATENT PENDING DC POWER - PROVIDES 2X FASTER SPEED2. PATENT PENDING LASER VEHICLE SPOTTING 3. HIGHER RISE4. INEXPENSIVE DAILY OPERATION5. THIRD-PARTY ETL GOLD CERTIFIED

SHOCKWAVE’S EARTH SHATTERING SPEED IS ACHIEVED THROUGH THE COMBINATION OF ITS PATENT PENDING DC POWER SYSTEM AND OTHER TECH FRIENDLY FEATURES.

ENT

W

ed lifts give uctures to

PAD / ARM HYBRID combines a front pad with three-stage rear arms

for versatility.

Model SPOA7N6X0BL 7,000 lbs. capacity drive over lift

Get The Quick Jobs In And Out With This Quick Service Pad Lift!

be spotted quickly and accurately

The quick service pad lift includes time saving features that help get

your customers in and out fast with efficient routine service. The ultra-

low profile, easy to adjust pad minimizes drive-over clearance and

allows vehicles to be spotted quickly, easily and accurately.

SPOA7QUICK SERVICE PAD LIFT

7,000 LBS. CAPACITY

LIGHT DUTY TWO-POST ASYMMETRIC LIFTS LIFT SPECIFICATIONS / 7,000 lbs. CAPACITIES

Rubber spacer blocks provide additional clearance when needed.p clearan

Model: ATO7N100BL 7,000 lbs. capacity asymmetric lift

Asymmetric design allows for open door clearance

two post lift

SPACE SAVING TWO POST LIFTAT077,000 LBS.

CAPACITY

Asymmetric two-post lift designed for maximum drive-thru clearance with minimal external dimensions.

30˚ rotated column design of the posts and supporting arms provides a spacious pick-up area and allows for greater open door clearance.

Stackable adapters and storage rack included

* Rise is measured from floor to top of pad at full cylinder stroke Rise dimensions increase by 3” with extended rise options NO PAD: 74” 1 1/2” PAD: 75 1/2” 3” PAD: 77”

** Overall heights and widths reflect standard settings. Alternate settings may be available, refer to Installation Instruction Manual or consult factory for details.***Optional 3-phase electrical available

StandardEH1 EH2

Model: SPOA7-MP

Standard

Model: ATO7

Capacity 7000 lbs (3175kg)

A. Rise* 71 5/8”- 79” (1809-2007mm)

B. Height OverallCylinder at full rise

11’ 10 1/2” (3619mm)

B.5 Floor to Top of Overhead 11’ 8 1/2” (3659mm)

C. Width Overall 10’ 3” (3124mm)

D. Drive-Thru Clearance 92” (2336mm)

E. Floor To Overhead Switch 11’ 2 3/8” (3414mm)

F. Reach (front arm min.) 21 3/4” (552mm)

G. Reach (front arm max.) 43 1/2” (1105mm)

H. Reach (rear arm min.) 34 1/2” (876mm)

I. Reach (rear arm max.) 58” (1473mm)

J. Min. Adapter Height 3 5/8” (92mm)

K. Max Adapter Height 5 7/8” (149mm)

L. Inside Columns 100 3/4” (2560mm)

Motor 2HP

Voltage 1PH/60HZ/208-230V

Time of Full Rise 45 seconds

Ceiling Height Required 12’ (3660mm)

Stackable adapters (4) 3 1/2” (90mm)

Stackable adapters (4) 5 1/8” (130mm)

Min bay size 11’ x 24’ (3353 x 7315mm)

* Rise measures lowest or highest position of the supplied adapters from floor to full cylinder stroke.

Model: AT07

DC

HI

FG

Improve vehicle reach with adjustable drive-over pads

Maximum Distance Between Pads55 9/16” (1411mm)

Pad Length Overall Extended86 13/16” (2205mm)

e Minimum Distance Between Pads 39 9/16” (1004mm)

Pad Length Overall Retracted70 13/16” (1799mm)

4 spacer blocks are included with lift

ASYMMETRICLIFTS PERFECT DESIGN FOR CARS and LIGHT TRUCKS

Hinged approach ramps



RAL3002RAL5005

RAL7040 RAL9005

Standard color of lifts are blue and red unlessotherwise noted. Gray and black are available at no additional charge. Additional colors are available, consult your Rotary® representative for details.

Model: WITH SHOCKWAVE

SPOA7-MPSPOA7-MPSW

Lifting Capacity 7,000 lbs. (3157kg)

Lifting Capacity (per platform) 3,500 lbs. (1588kg)

A. Rise* 74”-77” (1880-1956mm)

B. Width Overall** 11’ 5 3/8” (3489mm)

C. Floor to Top of Overhead

11’ 8 1/2” (3569mm)12’ 8 1/2” (3874mm)13’ 8 1/2” (4178mm)

C.5Cylinder at Full RiseWITH SHOCKWAVE

11’ 10 1/2” (3620mm)

12’ 4 1/2” (3778mm)

D. Width Between Columns 107” 1/4” (2724mm)

E. Floor to Overhead Switch 11’ 2 3/4” (3423mm)

F. Drive Over Clearance 2 5/8” (67mm)

G. Drive-Thru Clearance 79” (2007mm)

H. Outside of Pad to Outside of Pad 78 1/2” (1994mm)

I. Inside of Pad to Inside of Pad 37 1/8” (968mm)

J. Pad Length Overall RetractedPad Length Overall Extended

70 13/16” (1799mm) 86 13/16” (2205mm)

K. Minimum Distance Between PadsMaximum Distance Between Pads

39 9/16” (1004mm)55 9/16” (1411mm)

Motor PerformanceWITH SHOCKWAVE

2hp5hp

Voltage Single Phase***WITH SHOCKWAVE

208/230v110v

Time of RiseWITH SHOCKWAVE

45 seconds25 seconds

Ceiling Height Required: WITH SHOCKWAVE

12’ (3658mm)

12’ 6” (3810mm)

Min. Bay Size 12’ x 24’ (3658 x 7315mm)

LIFT AVAILABLE IN BLUE ONLY

AT07 is available in blue only.RAL5005

10’ - 3” Overall Width

14.5” narrower than standard

two post

45º Asymmetric Column Design

B

KA

E

J

L

B.5

RAL3002RAL5005 RAL7040 RAL9005Standard color of lifts are blue and red unless otherwise noted. Gray and black are available at no additional charge.

Additional colors are available, consult your Rotary® representative for details.

LIGHT DUTY TWO-POST ASYMMETRIC LIFTS

ASYMMETRICLIFTS

These are the fastest lifts in the world specifically designed for service bays where speed is essential. Achieve your goals of greater technician productivity and higher profits with exclusive lift technology available only from Rotary.

™ motion activated laser

SPOA10THE INDUSTRY STANDARD

For over 30 years, Rotary Lift has built 2-post lifts with the engineering, quality and attention to manufacturing detail that can't be found anywhere else. With true asymmetric rotated column design and numerous other design advantages, the original Rotary SPOA10 can't be beat…by anyone.

Trust the industry’s original and proven Asymmetrical lift. Why go anywhere else?

10,000 LBS. CAPACITY

SHOCKWAVE-EQUIPPED TWO-POST LIFTS; STANDARD WITH SPEED, CHOICE & R.O.I.

SPOA10-SW10,000 LBS. CAPACITY

PERFECT DESIGN FOR CARS and LIGHT TRUCKS

* Rise measures lowest or highest position of the supplied adapters from floor to full cylinder stroke. ** Overall heights and widths reflect standard settings. Alternate settings may be available, refer to Installation Instruction Manual or consult factory for details.***Optional 3-phase electrical available.

Model

SHOCKWAVE Models

SPOA10Standard Arms

Flip Up Adapters

SPOA10-SWSHOCKWAVE LIFT

SPOA10-TAThree-Stage Arms

Truck Adapters

SPOA10-TASWSHOCKWAVE LIFT

SPOA10-RAThree-Stage Arms Round Adapters

SPOA10-RASWSHOCKWAVE LIFT

SPOA7-HYSWFixed Front Pads with 3-Stage Rear Arms

SHOCKWAVE LIFT

Capacity 10,000 lbs. (4536kg) 10,000 lbs. (4536kg) 10,000 lbs. (4536kg) 7,000 lbs.

A.Rise*WITH SHOCKWAVE

72 3/4”- 78 1/4”(1848 - 1987mm)

75 3/4”- 81 1/4”(1924 - 2064mm)

71 9/16”- 82 1/16”(1817 - 2084mm)

74 9/16”- 85 1/16”(1894 - 2174mm)

71 5/8”- 73 7/8”(1819 - 1876mm)

74 5/8”- 76 7/8”(1895 - 1953mm)

76 7/8” (1953mm)

B.Height Overall: StandardEH1EH2

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3874mm)

13’ 8 1/2” (4178mm)

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3874mm)

13’ 8 1/2” (4178mm)

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3874mm)

13’ 8 1/2” (4178mm)

11’ 8 1/2” (3569mm)

12’ 10 1/2” (3874mm)

11’ 10 1/2” (4178mm)

C. Width Overall** (outside of base plate)

11’ 5 3/8” (3489mm) 11’ 5 3/8” (3489mm) 11’ 5 3/8” (3489mm) 11’ 5 3/8” (3489mm)

D. Drive-Thru Clearance 95 1/4” (2416mm) 95 1/4” (2416mm) 95 1/4” (2416mm) 83 3/8” (2118mm)

E. Floor To Overhead Switch 11’ 2 3/4” (3423mm) 11’ 2 3/4” (3423mm) 11’ 2 3/4” (3423mm) 11’ 2 3/4” (3423mm)

F. Reach (front arm min.) 24” (610mm) 21 3/4” (552mm) 21 3/4” (552mm) N/A

G. Reach (front arm max.) 40 3/4” (1036mm) 43 1/2” (1105mm) 43 1/2” (1105mm) N/A

H. Reach (rear arm min.) 40 1/4” (1019mm) 34 1/2” (876mm) 34 1/2” (876mm) 64 1/2” (1638mm)

I. Reach (rear arm max.) 61” (1548mm) 58” (1473mm) 58” (1473mm) 30-3/8” (771mm)

J.Min. Adapter HeightMax. Adapter Height

4 3/4” (121mm)

N/A 4 3/4” (121mm)

7” (178mm)

3 5/8” (92mm)

5 7/8” (149mm)

Rear arm: 3 3/4” (95mm)

Front pad: 2 7/8” (73mm)

Front arm: 5 1/4” (133mm)

K. Low Step Height 7” (178mm) N/A N/A N/A

L. High Step Height 10 1/4” (260mm) N/A N/A N/A

M. Inside Columns 107 1/4” (2727mm) 107 1/4” (2727mm) 107 1/4” (2727mm) 107 1/4” (2727mm)

N.Cylinder at Full Height WITH SHOCKWAVE

11’ 10 1/2” (3619mm)

12’ 4 1/2” (3772mm)

11’ 10 1/2” (3619mm)

12’ 4 1/2” (3772mm)

11’ 10 1/2” (3619mm)

12’ 4 1/2” (3772mm)12’ 4 1/2” (3772mm)

Motor / Voltage 1Ø***WITH SHOCKWAVE

2 HP / 208v-230v5 HP / 110v

2 HP / 208v-230v5 HP / 110v

2 HP / 208v-230v5 HP / 110v

5 HP / 110 v

Time of Full Rise / DescentWITH SHOCKWAVE

45 / 40 seconds25 / 19 seconds



25 / 19 seconds

Ceiling Height Required: WITH SHOCKWAVE

12’ (3658mm)

12’ 6” (3810mm)

12’ (3658mm)

12’ 6” (3810mm)

12’ (3658mm)

12’ 6” (3810mm)

12’ 6” (3810mm)

Min. Bay Size 12’ x 24’ (3658 x 7315mm)

12’ x 24’ (3658 x 7315mm)

12’ x 24’ (3658 x 7315mm)

12’ x 24’ (3658 x 7315mm)

SHOWN WITH: Three-stage FRONT arms with round (RA) adaptersPerfect for uni-body construction and low profile vehicles.


Ultra low profile movable pad slides easily into place for lifting unibody vehicles

LIFT SPECIFICATIONS / 7,000 lbs. to 10,000 lbs. CAPACITIES

T

Model shown: SPOA10N700BL Shown with optional accessoriesand additional equipment

Exclusive patent pending pad / arm hybrid combines a front pad with three-stage rear arms for versatility.

* Rise is measured to top of pad / Rise dimensions increase by 3” with extended rise options: NO PAD: 74” 1 1/2” PAD: 75 1/2” 3” PAD: 77” ** Overall heights and widths reflect standard settings. *** Optional 3-phase electric available

# SPOA7-HYSW7,000 lbs. capacity

# SPOA7-MPSW7,000 lbs. capacity

ADDITIONAL SHOCKWAVE LIFT OPTIONS - CUSTOMIZE WITH YOUR CHOICE OF ADAPTERS, ARMS AND SUPERSTRUCTURES

Standard with three-stage FRONT arms and polymer truck adapters primarily used on framed vehicles. Adapters thread-up or have optional stackable inserts.

# SPOA10-RASW 10,000 lbs. capacity

# SPOA10-TASW10,000 lbs. capacity

SHOWN WITH: Three-stage

flip-up adapters with built-in

height adapters on standard

2-stage arms# SPOA1010,000 lbs. capacity


ASA YS MMETRICLIFTS

The s g hiava

SH STA

PERFEC

SHarmPer

Model shown: SPOA10U5G5RDSHOCKWAVE equipped asymmetric lift

* Ri i d t t f d / Ri di i i b 3” ith t d d i ti

Model: SPOA7-MPSW

Appr

oach

321

WheelSpottingDish

A

B

E

M

J K

N

L

D

C

HI

FG

Models: SPOA10 SPOA10-RA

SPOA7-MPSW Drive-Over Moveable Pads

SHOCKWAVE LIFT

Lifting CapacityPer Platform

7,000 lbs. (3157kg)

3,500 lbs. (1588kg)

A. Rise* 74”-77” (1880-1956mm)

B. Width Overall** 11’ 5 3/8” (3489mm)

C. Floor to Top of Overhead

C.5 Cylinder at Full Rise12’ 4 1/2” (3772mm)

D.Width Between Columns 107” 1/4” (2724mm)

E. Floor to Overhead Switch 11’ 2 3/4” (3423mm)

F. Drive Over Clearance 2 5/8” (67mm)

G. Drive-Thru Clearance 79” (2007mm)

H. Outside of Pad to Outside of Pad 78 1/2” (1994mm)

I. Inside of Pad to Inside of Pad 37 1/8” (968mm)

J.Overall Pad Length Retracted Extended

70 13/16” (1799mm) 86 13/16” (2205mm)

K.Min. / Max. Distance Between Pads

39 9/16” (1004mm)55 9/16” (1411mm)

Min. Adapter Height 2 5/8” (67mm)

Motor / Voltage*** 5hp / 110v

Time of Full Rise / Descent 25 / 19 seconds

Ceiling Height Required 12’ 6” (3810mm)

Min. Bay Size 12’ x 24’ (3658 x 7315mm)

Standard: 11’ 8 1/2” (3569mm)EH1: 12’ 8 1/2” (3874mm)EH2: 13’ 8 1/2” (4178mm)

ALSO AVAILABLE WITHThree-stage arms with RA Adapters #SPOA10-RA / 10,000 lbs. capacity

Three-stage arms with Truck Adapters #SPOA10-TA / 10,000 lbs. capacitypacitypacity


LIGHT DUTY TWO-POST SYMMETRIC LIFTS

SPO10-SW Minimum Required Ceiling Height: 12’ 4-3/4”

SPO10THE PROVEN STANDARDTrust the industry standard symmetrical 10,000 lb. lift. Why look anywhere else?


SPO12THREE STAGE ARMS for GREATER REACH


The Rotary SPO12 sets the standard for reliability and quality in 12,000 lb. capacity lifts.

More dealers and independent repair shops choose the Rotary SPO12 because of its reputa-tion for quality and reliability. With a standard feature set that can't be beat, it's easy to see why. Customizable features include low ceiling or extended height settings. Or choose to supercharge your lift with a Shockwave-equipped model.

CH

Rotary Lift has built quality into every two-post they've designed. The SPO10 has proven this time and time again. With features like the original single piece "double S" shaped column, true asymmetric columns, three position flip-up adapters, available 3-stage arms with thread-up or truck adapters and extended height models, the SPO10 delivers everything your shop needs.

Standard with three-stage FRONT arms and polymer truck adapters primarily used on framed vehicles. Adapters thread-up or have optional stackable inserts.

# SPO12-TA12,000 lbs. capacity

Appr

oach

321

WheelSpottingDish

A

B

E

M

J K

N

L

D

C

HI

FG

LIFT SPECIFICATIONS / 10,000 lbs. and 12,000 lbs. CAPACITIES

SHOWN WITH: Three-stage

flip-up adapters with built-in

height adapters on standard

2-stage arms# SPO1010,000 lbs. capacity

SYMMETRICLIFTS WIDER DRIVE THRU FOR TRUCKS AND VANS

Models: SPO10 SPO10-RA SPO10-TA SPO12-TA



* Rise measures lowest or highest position of the supplied adapters from floor to full cylinder stroke.

** Overall heights and widths reflect standard settings. Alternate settings may be available, refer to Installation Instruction Manual or consult factory for details.

***Optional 3-phase electrical available.

RAL3002RAL5005

RAL7040 RAL9005

Standard color of lifts are blue and red unless otherwise noted. Gray and black are available at no additional charge. Additional colors are available, consult your Rotary® representative for details.

Model shown: SPO12N7TOBLShown with optional accessories and additional equipment

Model shown: SPO10N700RDShown with optional accessories and additional equipment

ALSO AVAILABLE WITH

Model:

SHOCKWAVE Models

SP010Standard Arms

Flip Up Adapters

SPO10-SWSHOCKWAVE LIFT

SP010-RAThree-Stage Arms Round Adapters

SPO10-RASWSHOCKWAVE LIFT

SP010-TAThree-Stage Arms

Truck Adapters

SPO10-TASWSHOCKWAVE LIFT

SPO12-TAThree-Stage Arms

Truck Adapters

SPO12-SWSHOCKWAVE LIFT

A.Rise*

WITH SHOCKWAVE

72 5/8”- 78 1/8”(1845 -1984mm)

75 5/8”- 81 1/8”(1921-2061mm)

72 1/2”- 74 3/4”(1841-1898mm)

75 1/2”- 77 3/4”(1918 -1978mm)

72 5/8”- 75 5/8”(1845 -1921mm)

75 5/8”- 78 5/8”(1921-1997mm)

72 3/4”- 75 3/4”(1848 -1924mm)

75 3/4”- 78 3/4”(1924 -2000mm)

B.Height Overall: Standard EH1 EH2

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3873mm)

13’ 8 1/2” (4178mm)

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3873mm)

13’ 8 1/2” (4178mm)

11’ 8 1/2” (3569mm)

12’ 8 1/2” (3873mm)

13’ 8 1/2” (4178mm)

13’ 8” (4166mm)

14’ 8” (4470mm) 15’ 8” (4775mm)


11’ 5 1/2” (3493mm) 11’ 5 1/2” (3493mm) 11’ 5 1/2” (3493mm) 11’ 5 5/8” (3496mm)

D. Drive-Thru Clearance 102 1/2” (2603mm) 102 1/2” (2603mm) 102 1/2” (2603mm) 102 3/8” (2600mm)

E. Floor To Overhead Switch 11’ 2 3/4” (3423mm) 11’ 2 3/4” (3423mm) 11’ 2 3/4” (3423mm) 13’ 3 1/8” (4042mm)

F. Reach (front arm min.) 31” (787mm) 27 1/2” (699mm) 27 1/2” (699mm) 27 1/2” (699mm)

G. Reach (front arm max.) 54” (1372mm) 59” (1499mm) 59” (1499mm) 59” (1499mm)

H. Reach (rear arm min.) 31” (787mm) 27 1/2” (699mm) 27 1/2” (699mm) 27 1/2” (699mm)

I. Reach (rear arm max.) 54” (1372mm) 59” (1499mm) 59” (1499mm) 59” (1499mm)

J. Min. Adapter HeightMax. Adapter Height

4 5/8” (118mm)

N/A3 3/4” (95mm)

6 3/4” (171mm)

4 5/8” (143mm)

7 5/8” (194mm)

4 3/4” (121mm)

7 3/4” (197mm)

K. Low Step Height 7” (178mm) N/A N/A N/A

L. High Step Height 10 1/4” (260mm) N/A N/A N/A

M. Inside Columns 114 1/2” (2908mm) 114 1/2” (2908mm) 114 1/2” (2908mm) 114 7/8” (2918mm)

N.Cylinder Height at full rise

WITH SHOCKWAVE

11’ 10 3/4” (3626mm)

12’ 4 1 /2” (3772mm)

11’ 10 3/4” (3626mm)

12’ 4 1 /2” (3772mm)

11’ 10 3/4” (3626mm)

12’ 4 1 /2” (3772mm)

11’ 10 3/4” (3626mm)

12’ 4 1 /2” (3772mm)

Lifting Capacity 10,000 lbs. (4536kg) 10,000 lbs. (4536kg) 10,000 lbs. (4536kg) 12,000 lbs. (5443kg)

Motor / Voltage***

WITH SHOCKWAVE

2 HP / 208v-230v

5 HP / 110v

2 HP / 208v-230v

5 HP / 110v

2 HP / 208v-230v

5 HP / 110v

2 HP / 208v-230v

5 HP / 110v

Time of Full Rise

WITH SHOCKWAVE

45 seconds

25 seconds

45 seconds

25 seconds

45 seconds

25 seconds

60 seconds

25 seconds

Ceiling Height Required: StandardWITH SHOCKWAVE EH1 EH2

12’ (3658mm)

12’ 6” (3810mm)

12’ 10” (3912mm) 13’ 10” (4216mm)

12’ (3658mm)

12’ 6” (3810mm)

12’ 10” (3912mm) 13’ 10” (4216mm)

12’ (3658mm)

12’ 6” (3810mm)

12’ 10” (3912mm) 13’ 10” (4216mm)

13’ 9” (4191mm)

13’ 9” (4191mm)

14’ 9” (4496mm) 15’ 9” (4801mm)

Max Load (per arm) 2,500 lbs. (1134kg) 2,500 lbs. (1134kg) 2,500 lbs. (1134kg) 3,000 lbs. (1360kg)

Min. Bay Size 12’ x 24’ (3658 x 7315mm)

12’ x 24’ (3658 x 7315mm)

12’ x 24’ (3658 x 7315mm)

12’ x 26’ (3658 x 7925mm)

Three-stage arms with RA Adapters #SPO10-RA / 10,000 lbs. capacity

Three-stage arms with Truck Adapters #SPO10-TA / 10,000 lbs. capacityacity acity

* Rise measures lowest or highest position of the supplied adapters from floor to full cylinder stroke. On standard height models, cylinder height is higher than overall height.

** Overall heights and widths reflect standard settings. Alternate settings may be available, refer to Installation Instruction Manual or consult factory for details.

*** Optional 3-phase electrical available

Model: SPO15 SPO18

A. Rise* 76 7/8” / 88 7/8” (1953-2257mm) 76 7/8” / 88 7/8” (1953-2257mm)

B.Height Overall: Standard Adjustments Low Ceiling (LC)

15’ / 15’ 6” (4572-4724mm)

16’ / 16’ 6” (4877-5029mm)

13’ 6”/ 14’ 6” (4115-4420mm)

15’ / 15’ 6” (4572-4724mm)

16’ / 16’ 6” (4877-5029mm)

13’ 6”/ 14’ 6” (4115-4420mm)


12’ 11” (3937mm) 12’ 11” (3937mm)

D. Drive-Thru Clearance 101 1/2” (2578mm) 101 1/2” (2578mm)

E. Floor To Overhead Switch 14’ 5”-15’ 11” (4394-4851mm) 14’ 5”-15’ 11” (4394-4851mm)

F. Reach (front arm min.) 38 1/2” (978mm) 38 1/2” (978mm)

G. Reach (front arm max.) 62” (1574mm) 62” (1574mm)

H. Reach (rear arm min.) 38 1/2” (978mm) 38 1/2” (978mm)

I. Reach (rear arm max.) 62” (1574mm) 62” (1574mm)

J. Min. Adapter Height 5 3/4”-7 1/2” (146-190mm) 5 3/4”-7 1/2” (146-190mm)

K. Low Step Height 10 3/4” - 12 1/2” (273-318mm) 10 3/4” - 12 1/2” (273-318mm)

L. High Step Height 15 3/4” - 17 1/2” (400-445mm) 15 3/4” - 17 1/2” (400-445mm)

M. Inside Columns 120 1/4” (3054mm) 120 1/4” (3054mm)

Lifting Capacity 15,000 lbs. (6804kg) 18,000 lbs. (8165kg)

Motor / Voltage*** 2 HP / 208v-230v 2 HP / 208v-230v

Time of Full Rise 85 seconds 85 seconds

Ceiling Height Required: Standard Low Ceiling (LC)

15’ 1” min (4597mm)

13’ 7” min (4140mm)

15’ 1” min (4597mm)

13’ 7” min (4140mm)

Max Load (per arm) 3,750 lbs. (1700kg) 4,500 lbs. (2041kg)

Min. Bay Size 15’ x 30’ (4572 x 9144mm) 15’ x 30’ (4572 x 9144mm)

Symmetrical column orientation

True Symmetrical Lifts

Greater width between columns - accommodates larger vehicles and improves vehicle access - allows max door opening on trucks and vans for improved access to vehicle interior

Vehicle load is centered between the columns to maximize lifting capacity

Model shown: SPO15N310RDShown with optional accessories and additional equipment

All of Rotary's award winning light duty features can be found on our heavy duty two-post lifts. With available capacities up to 18,000 pounds and options like low ceiling models, you can rest assured we have a lift for your heavy duty job.

HEAVY DUTY TWO-POST SYMMETRIC LIFTS

LIFT SPECIFICATIONS15,000lbs. / 18,000lbs. CAPACITIES

Appr

oach

Wheel Spotting Dish.

321

54

D

C

HI

FG

A

B

E

M

J K L

FRAME ENGAGING SYMMETRICAL DESIGN

Tool HolderThe tool holder keeps airguns, torque sticks, and other tools within easy reach. Mounts easily in holes already drilled and tapped in the two-post column.

Air/Electric Utility BoxesMount easily on any column and provides quick access to utilities

Two 110v electric outlets and air connection

helps extend the life of your air tools

s

Model shown: SPO18N310BL Shown with optional accessories and additional equipment

for an additional 10” of reach

The Rotary SPO18 sets the standard for reliability and quality in heavy duty lifts.

contact to the vehicle quick and easy

and is fully accessible for maintenance

The Rotary SPO15; trust the industry standard symmetrical 15,000 lbs. two post lift.

Stackable adapters with thread-up adjustment

Five position wheel spotting dishes come standard

Standard on 15,000 to 18,000 lbs. capacity lifts

SYMMETRICHEAVY DUTY SPO SERIES LIFT FEATURES

SPO15VERSATILE SUPER DUTY LIFT


SPO18SERVICE FLEET LINES and MORE


SYMMETRICLIFTS WIDER DRIVE THRU FOR TRUCKS AND VANS

FRAME CONTACT LIFTLOW CEILING MODEL AVAILABLE

SPO LIFT OPTIONS

FRAME CONTACT LIFTLOW CEILING MODEL AVAILABLE

RAL3002RAL5005

RAL7040 RAL9005

Standard color of lifts are blue and red unless otherwise noted. Gray and black are available at no additional charge. Additional colors are available, consult your Rotary® representative for details.

Models: SPO15 SPO18

OPTIONAL LIFT ACCESSORIES

Increase bay productivity with these commonly used two-post lift accessories

FEATURE AT07 7,000 lbs.

SPOA7 7,000 lbs.

SPO10 10,000 lbs.

SPOA10 10,000 lbs.

SPO12 12,000 lbs.

SPO15 15,000 lbs.

SPO18 18,000 lbs.

Lift column design Asymmetric Asymmetric Symmetric Asymmetric Symmetric Symmetric Symmetric

ALI Certified

Surface mounted models

SHOCKWAVETM Equipped models N/A N/A N/A

3-phase power units

Single point air operated lock release

Multi-position locking systems

Standard single piece “Double S” column construction

Hydraulic cylinders in each column

Overhead cables / clear floor design

Seismic rated column baseplate N/A N/A N/A N/A

Adjustable narrow column width N/A N/A N/A N/A N/A

Adjustable wider column width N/A N/A N/A N/A N/A N/A

Extended higher rise option N/A N/A N/A N/A

Extended overhead height options N/A N/A N/A N/A

Low ceiling model available N/A N/A N/A N/A

3-stage arms N/A PADS N/A N/A

Screw-up adapter N/A

Overhead padded switch bar

3 position wheel spotting dish

Standard Feature

Optional Feature

TWO-POST STANDARD / OPTIONAL LIFT FEATURES

#FA834 / 110V#FA835 / 220V

Lock LightTM Provides an instant green light visual confirmation when lift is lowered to its locks. Compatible with most surface and high-pressure lifts that use an electric/hydraulic power unit providing an unused pressure port is available.Kit includes:

TECH LIGHT TM Line Light 2Attach the 2 ultra slim light wands to colums for effective, efficient 2-post lighting where you need it. Supplied with 4 magnetic clips for easy positioning.

#FA5702

Includes:

cable and 20W power supply

16” for placement under vehicle

#FA5701

TECH LIGHT TM Line Light RRechargable LED inspection hand lamp with top spot light.Supplied with flexible suspension clips holder with both hook and magnet for positioning the light exactly where you need it

Additional suspension solutions available as accessories.

180 lumen in main light operates for up to 3 hours

120 lumen in spot light operates for up to 6 hours

4 hour charging time

Auxiliary AdaptersAuxiliary adapters for use when raising certain vans or pickups. Includes four adapters, mounting rack and hardware.

overall adapter height (365 - 441mm)

Air / Utility BoxMounts easily on any column and provides quick access to utilities

air connection

helps extend the life of your air tools

#FA5911BK

rovides

K

Accessories shown may be used with most frame contact models. Adapters fit any surface mounted, frame engaging Rotary Lift manufactured since October of 1973.Consult your Rotary Authorized Distributor for more information concerning these accessory options.

MW-200 Tire Lift200 lbs. capacity air operated tire and wheel lift. Provides maneuverability and adjustable lifting and lowering speeds.

tool connection #MW-200

Wheel WingTM Kit Tire ArmHandy for tire rotations and brake jobs, the Wheel Wing mounts easily on any column arm and holds a tire at lift arm height. Folds away when not in use.

lug nut dishes, shims

#FA5974

Tool HolderTo keep tools handy for the technician, this patented tool holder keeps air guns, torque sticks, and other tools within easy reach. This accessory mounts easily in holes already drilled and tapped in the two-post column.

Adapters and Organizer RackAccommodate more vehicles quickly and easily with more adapters plus keep them organized.

four FJ698 adapters

adapter organizer rack (FJ6108)Also available in different configurations.

Adapter and Mounting RackRequired for raising minivans with running boards. Includes four adapters, mounting rack and hardware.

4 7/8” (124mm) to 6 3/4” (171mm) additional height

undercoated surfaces

Polymer Pad Adapter KitsPolymer pad adapters for use with new car undercoating. Includes four adapters, mounting rack and hardware.

#FJ6138BK (Adds 1/2” / 12mm)

#FJ6190YL (Adds 1” / 25mm)

#FJ6139BK (Adds 2 1/2” / 63mm)

#FJ6195YLAdds 12 3/8” (314mm) of height - includes 2 adapters

# FJ6115BKAdds 9 3/8” (238mm) of height- includes (4) 14 3/8” / 365mm adapters

#FJ6212KITYL - shorter versionAdds 7 3/8” (187mm) of height- includes 4 adapters

Extended Height AdapterRequired to lift 1988 or newer General Motors® GMT400 pickup trucks. Includes four adapters, mounting rack and hardware.

per adapter

#FJ6133BK

Thread-Up AdapterAuxiliary adjustable thread-up adapter with rubber pads allow for protection of underbody vehicle components or undercoating. For raising certain vans or pickups.

#FJ6197 (for 10,000 lbs. (4536kg) capacity lifts includes (4) FJ6214 adapters) Required use on 3-stage arms when lifting trucks and other frame vehicles

RA AdapterSet of four (4) FJ6202 polymer pad round adapters. Adapters thread-up to allow protection of the vehicle underbodycomponents or undercoating for no metal to metal contact. For use on 3-stage arms when lifting uni-body constructionvehicles. Also available for use with stackable inserts.

Door DefenderThe door defender is a low profile solid rubber guard designed to fit over the two-post lift carriage. Allows technicians to easily enter and exit the vehicle without vehicle damage. Includes one (1) padded defender, and adhesive.

Adapter ExtensionsProvides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift.

Fits models SPO/SPOA10 RA/TA and SPO12TA 3-stage arms

Includes four 3 1/2” (89mm) andfour 5” (127mm) adapter extensions,mounting rack and hardware.

r lift.

#FJ7880BK adapter extension kit

Column Base Plate CoverRefresh your shop’s appearance with a unique accessory from Rotary Lift designed to cover the base plates on popular two-post lift models. Keep mounting hardware hidden and safely enclosed and protected from day to day use. Base plate covers fit standard Rotary Lift SPOA10, SPOA9 (200 series and above) and SPOA7 (200 series and above) lifts.

Jack StandsThe RS4, 4,000 lbs. capacity jack stand provides supplemental assurance of vehicle lift safety.Maximum height: 84” (2133mm)Minimum height: 55 1/2” (1410mm)Fine thread-up height:1 5/8” to 7 1/8” (41mm to 181mm)

Extended Height KitsRaise the overhead clearance on 10,000 and 12,000 lbs. capacity two-post lifts to service more vehicles at a comfortable working height. Kit includes column extensions and hardware.

CONSULT FACTORY FOR OPTIONS

#FJ6137BK

CONSULT FACTORY FOR OPTIONS#FJ6100BK

#FJ6202

#FA5191EBK

#RS4

#N823

#N539

#MW-500 500 lbs. capacity model available

Documents

VEHICLE CLASS sssssssssssssssssssssssssssss Two Postcjmcomp.com/pdf/Rotary Two Post_Aboveground Lifts.pdf · True Asymmetrical Lifts 7,000 to 10,000 lbs. capacities (SPOA/A series)