2
TR10EH3 V-LINE ® High-cycle Compact Precision Injection Molding Machine Electric hybrid direct pressure mold clamping Ultra-high cycle molding Equipped with V-LINE ® & "LDDV" TR10EH3 is the latest high-cycle compact preci- sion injection molding machine, aiming for the world's fastest direct pressure mold clamping ma- chine. It realizes a reduction in the dry cycle time and a reduction in the molding cycle time, by weight saving, low inertia, reduction of hydraulic fluid amount, and standardization of simultaneous op- eration. TR10EH3 is equipped with an electric hybrid di- rect pressure mold clamping system, combined with the advantages of the electric system and the hydraulic system. A symmetric mechanism was also adopted, which equalizes the expansion and contraction by the pressing force and the thermal expansion of the mold from the center. It realizes the latest high-cycle by maintaining an accurate mold clamping position, and smooth and quick transfer from mold closing to mold clamping. Adoption of the unique V-LINE ® and ultra-high re- sponse control injection valve LDDV * (Linear Direct Double Valve), further enables molding of ultra-small precision components, and responds to various needs. It achieves the outstanding performance in high-value added molding across a wide range, including ultra-thin, fine shapes, and less strain. (* When LP specification is selected) The latest high-cycle and stable molding greatly improved the yield rate for compact precision molded products V-LINE ® is a registered trademark of Sodick Co., Ltd. Recycle Friendly Maintenance free Reduce waste

V-LINE High-cycle Compact Precision Injection …...V-LINE® High-cycle Compact Precision Injection Molding Machine Unit:mm Clamping Unit Max. clamping force kN 98 Tie bar distance

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Page 1: V-LINE High-cycle Compact Precision Injection …...V-LINE® High-cycle Compact Precision Injection Molding Machine Unit:mm Clamping Unit Max. clamping force kN 98 Tie bar distance

TR10EH3V-LINE® High-cycle Compact Precision Injection Molding Machine

Electric hybrid direct pressure mold clampingUltra-high cycle molding Equipped with V-LINE® &

"LDDV"TR10EH3 is the latest high-cycle compact preci-sion injection molding machine, aiming for the world's fastest direct pressure mold clamping ma-chine.It realizes a reduction in the dry cycle time and a reduction in the molding cycle time, by weight saving, low inertia, reduction of hydraulic fluid amount, and standardization of simultaneous op-eration.

TR10EH3 is equipped with an electric hybrid di-rect pressure mold clamping system, combined with the advantages of the electric system and the hydraulic system. A symmetric mechanism was also adopted, which equalizes the expansion and contraction by the pressing force and the thermal expansion of the mold from the center.It realizes the latest high-cycle by maintaining an accurate mold clamping position, and smooth and quick transfer from mold closing to mold clamping.

Adoption of the unique V-LINE® and ultra-high re-sponse control injection valve LDDV* (Linear Direct

Double Valve), further enables molding of ultra-small precision components, and responds to various needs.It achieves the outstanding performance in high-value added molding across a wide range, including ultra-thin, fine shapes, and less strain.

(* When LP specification is selected)

The latest high-cycle and stable molding greatly improved the yield rate

for compact precision molded products

 ● V-LINE® is a registered trademark of Sodick Co., Ltd.Recycle Friendly Maintenancefree

Reducewaste

Page 2: V-LINE High-cycle Compact Precision Injection …...V-LINE® High-cycle Compact Precision Injection Molding Machine Unit:mm Clamping Unit Max. clamping force kN 98 Tie bar distance

120180

120 st 0~30

90

60 H

7

45

20

16

1

B

B

A

A

85

85

57

4-M12

310

270

275.7 267.7

293

144.5

118

4-M6 Tap Depth 12

24-M10 Tap Depth 22

M8 Tap Depth 16

8- 10 H7 Depth 15

230

300

200

150

100

100

150

200

230

70

70

390

315

4-M6 Tap Depth 12

24-M10 Tap Depth 22

8- 10 H7 Depth 15

170

170

35

15 32.5

110 110

120 120

2-M16 Tap Depth 30

6-M12 Tap Depth 20

A-A

B-B

1.530 10 30.42.0

2.53.0

Main spec of nozzle

Diameter ofnozzle gate Extension Sphere R Outside diameter

of cover

Min. Mold thickness

Unit stroke

Movable platen

Resin feed, Tap size for hopperBolt hole for take off robot

Eject start position

Ejector stroke

Fixed platenMax. Mold open stroke

Safety cover

Mold installation suface

Dummy cover

13

85

15

65

11

0

14

95

43

447 468

20

0

10

57

16

5

161

13

08

57

5

12

07

13

50

IN OUT 302 348

65

0

2000

1085 915

30

0

35

0

765 1005

22

0

26

5

22

0

26

7

Mold instalation face

Mounting layout drawing

Air supply Rc1/4Water supply Rc1/2Power supply socket(Opposite Operation Side)

Power Cable Area More Than 8㎟

TR10EH3V-LINE® High-cycle Compact Precision Injection Molding Machine

Unit:mm

Clamping Unit

Max. clamping force kN 98

Tie bar distance mm 170 × 170

Open daylight(Min. mold thickness + Max. stroke)

mm 300

Min. mold thickness mm 120

Ejector stroke mm 30

■ Spec. Screw injection unit

Screw diameter mm 14 18

Plunger diameter mm 12

Max. injection pressure MPa 197

Theoretical injection volume cm3 4.5

Max. injection speed mm/s 500

Plasticization capacity kg/h 3.3 6.5

Machine dimensions / Weight

Machine dimensions(L x W x H)

mm 2000 x 650 x 1565

Machine weight kg 1000

■ Machine Dimensions & Installation Drawing

■ Mold Installation Dimensions Drawing

Printed in Japan

3-12-1, Nakamachidai, Tsuzuki-ku, Yokohama, Kanagawa224-8522 JapanTEL: 81-45-942-3111 FAX: 81-45-943-7880

https://www.sodick.co.jp/en/

R1018700.2019.03<01>

Sodick Co., Ltd.

●�The export of Sodick's products and its related technologies (including software applications) is regulated under Japan's Foreign Exchange and Foreign Trade Control Law. In addition, because some of these products may be subject to re-export controls under the Export Administration Regulations (EAR) of the United States; please contact Sodick before offering or exporting these products overseas.

●This catalogue contains a photographic image that has been generated from 3DCG.●Options may be included in the photos of this catalog.●��Due to ongoing research, specifications are subject to change without prior notice.●The contents of this catalog is current as of March, 2019.