UT Transducers

Embed Size (px)

Citation preview

  • 8/10/2019 UT Transducers

    1/20

    An R/D Tech Company

    PROBE CATALOG

    20032004Ultrasonic Transducers

  • 8/10/2019 UT Transducers

    2/20

    Ultrasonic Transducers Ultrasonic Transducer Kits

    Connecting Cables and Adaptors

    Transducers and Tooling for Restricted Access and Precise Positioning

    Repair Services

    Full Service EDM Notching for Reference Standards

    19620 Russell Rd. Kent, WA 98032Phone 253 872-3565 Fax 253 872-0857

    NDT Engineering Corporation

    2000 NDT Engineering Corporation. All Rights Reserved.

    No part of this publication may be reproduced , stored in a retrieval system, or transmitted, in any form or by any means

    electronic, mechanical, recording, or otherwise, without prior written permission of NDT Engineering Corporation.

    Ultrasonic Transducer Catalog Number 2001-2

    Click Here TClick Here TClick Here TClick Here TClick Here To Browse Catalogo Browse Catalogo Browse Catalogo Browse Catalogo Browse Catalog

  • 8/10/2019 UT Transducers

    3/20

    IntroductionThe Company......................................................................3

    Warranty & Repairs...............................................................4

    Ordering Information............................................................5

    Contact TransducersStandard.............................................................................6

    Delay Line.............................................................................7

    Dual Element - Cylindrical....................................................8

    Dual Element - Rectangular..................................................9

    Shear Wave TransducersMicro Miniature..................................................................10Sub Miniature.....................................................................11

    Miniature...........................................................................12

    .375" and .500" element....................................................13

    QuikFit TransducersTransduc ers........................................................................14

    Wedges.............................................................................15

    Immersion TransducersStandard............................................................................16

    Slim-Line.............................................................................17

    UT Cables, Guides & CertsCables & Extensions...........................................................18

    Custom Kits & Guides.........................................................18

    TD Certification..................................................................19

    TABLEOFCONTENTS

    SSSSSELECTELECTELECTELECTELECTIIIIITEMTEMTEMTEMTEMBBBBBYYYYYLLLLLEFTEFTEFTEFTEFT-----CCCCCLICKINGLICKINGLICKINGLICKINGLICKINGWWWWWITHITHITHITHITHMMMMMOUSEOUSEOUSEOUSEOUSE

  • 8/10/2019 UT Transducers

    4/20

    Page 3

    WWWWWe We We We We Wo uld Liko uld Liko uld Liko uld Liko uld Like Te Te Te Te To Help Y o Help Y o Help Y o Help Y o Help Y o u !o u !o u !o u !o u ! By continuing to develop solutions to inspection requirements for commercial and military aircraft.

    By joining you in solving your eddy current and ultrasonic inspection problems.

    By meeting your AOG or other on time delivery requirements.

    By shipping to you a quality product that is backed by a lifetime guarantee against manufacture defects.

    By providing no cost, quality technical support by phone, fax or email.

    Ge nera l In form a tionGe nera l In form a tionGe nera l In form a tionGe nera l In form a tionGe nera l In form a tionA Market Leader in EC and UT Probe Design

    NDT Engineering Corporation is one of the worlds largest designer, manufacturer, and marketer of probes and

    transducers for EC and UT inspection. Our products include Eddy Current Probes, Ultrasonic Transducers, Engine

    Probes and Reference Standards in addition to the full service capabilities of EDM and Repair Services. Ourproducts can be found in commercial, commuter and military aircraft NDT documents.

    An Eddy Current Probe Or Ultrasonic Transducer for Every Application

    NDT Engineering Corporation offers over 10,000 standard and special design EC probes, UT transducers,

    reference standards and accessory items for virtually every application. This catalog is a representative sample

    of our total product line. For applications that require a nonstandard product, we proudly offer the most

    comprehensive special probe and applications services available anywhere.

    Fast Delivery

    Because we know that fast delivery is a must for most of our customers, we work very hard to meet or exceed all

    delivery requirements. If it is an AOG or some other urgent requirement and our customer says, I absolutely haveto have it by a specific date, making that delivery on time becomes our very highest priority.

    The Best Quality and Service

    As with any company, the day to day capability lay with its employees and we are fortunate to have outstanding

    talent with experience dating back to the early days of EC & UT implementation in the 1950's. We also boast

    major upgrades and improvements in both equipment and personnel to our EDM shop and our Quality Control.

    We are now able to facilitate all our customers needs while maintaining the strictest of controls on the quality of

    our products. This enables NDT Engineering to quickly serve the marketplace with products of exceptional

    quality and value. NDT Engineerings commitment to providing the very best customer service is evidenced by

    ongoing investments in manufacturing technology and productivity enhancing equipment.

    New Products

    Numerous products are not included in this catalog as we are constantly developing new probes and transducers

    to solve problems for an ever changing industry. To that end we have developed a team of highly qualified

    individuals who are at your disposal, ready to design and manufacture a solution for your next problem. So if it is

    not in this catalog call us and we will get you what you need.

  • 8/10/2019 UT Transducers

    5/20

    Page 4

    Re p a ir Se rvic e sNDT Engineering Corporation will repair any manufacturersequipment:

    Eddy Current Probes

    Engine Probes

    UT Transducers

    Adaptors

    Cable Assemblies

    TTU Equipment

    We guarantee to return repaired items in like-new condition with new product warranty at a price of 15-40%

    below new cost. Cost depends on extent of repair and replacement parts required. Items can be submitted for

    price quote prior to repair but if the customer decides against repair, the cost of return shipping will be the

    responsibility of the customer.

    WarrantyAll items sold by NDT Engineering Corporation are warranted against manufactured defects. Wear, damage,

    misuse, and corrosion are not covered by warranty. Length of warranties are per the following table:

    ITEMS WARRANTY PERIOD

    EC Probes Lifetime

    UT Transducers 6 Months

    Adaptors Lifetime

    Reference Standards LifetimeULP-90 Instrument 1 year

    TTU-90 Instrument 1 year

    All items returned under warranty must reference an RMA# (Returned Material Authorization)which must be requested from our office and visibly written on returned goods packaging.

    If it is determined that wear, damage, or corrosion is due to faulty materials or design, the item will be replaced

    at no charge. Warranted items will be repaired or replaced to new condition as needed and determined by NDT

    Engineering Corp. These items will have the full warranty starting with receipt by the customer of the returned

    items.

    The customer will pay shipping and duty costs as applicable, ship to:

    NDT Engineering Corporation

    19620 Russell Road, Kent, WA. 98032

    USA

    NDT Engineering Corporation will pay return shipping costs via the most economical means that have a shipping

    period of not more that 10 days. Shipping period is defined as the length of time in transit after leaving our plant

    and the arrival at destination. This excludes delays such as customs in the destination country.

    INTRO

    DUCTION

  • 8/10/2019 UT Transducers

    6/20

    START HERE FORORDERING INFO

    Quality of workmanship takes priority at NDT Engineering Corporation. Components and materials used in

    the manufacture of our transducers are checked to ensure that they comply with NDT Engineering Corporation

    specifications. Attention is paid to every aspect of design, production and assembly of all NDT Engineering

    Corporation transducers.

    The transducer is one of the most critical components of any ultrasonic system. A great deal of attention should

    be paid to selecting the proper transducer for the application. Consideration should be given to the use of

    focused transducers, transducers with wear surfaces that are appropriate for the test material, and the choice of

    the appropriate frequency and element diameter.

    While these guidelines are quite useful each application is unique and performance will be dependent ontransducer configuration, frequency and element diameter. The summaries below provide a general impression

    of the characteristics of each transducer series found in this section of the catalog.

    Transducer Series Description

    SUC Contact Transducers

    SCD and SCDR Delay Line Transducers

    SUD and SUDR Dual Element Transducers

    SX .156" Element Shear Wave Transducers

    SUSM .187" Element Shear Wave Transducers

    SUM .250" Element Shear Wave Transducers

    SU and S .375" and .500" Element Shear Wave Transducers

    QF and QFW QuickfitTMShear Wave Transducers and Wedges

    SUI and SUSI Immersion Transducers

    Except for our line of standard contact transducers (SUC) found on page 44, all transducers follow a specific

    numbering format that is easy to use both in selecting the proper transducer from this catalog and the design of

    special requirement transducers.

    SX 5 45 A SSX 5 45 A SSX 5 45 A SSX 5 45 A SSX 5 45 A S

    Part # SX 545AS (Page 46)

    .156" Shear wave transducer

    5mHz frequency450in aluminum

    Side mounted microdot

    TransducerSeries

    Frequency Angle Mater ialProjected

    ConnectorPosition

    Part # SUI 1037(Page 52)

    Standard immersion transducer

    10mHz frequency.375" element

    SUI 10 37SUI 10 37SUI 10 37SUI 10 37SUI 10 37Transducer Series Frequency Element Size

    Page

  • 8/10/2019 UT Transducers

    7/20

    CONTACTTRANSDUCERS

    Page 6

    StandardStandardStandardStandardStandard

    ELEMENTELEMENTELEMENTELEMENTELEMENT DIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONS PPPPPART NOART NOART NOART NOART NO..... ELEMENTELEMENTELEMENTELEMENTELEMENT DIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONS PPPPPART NOART NOART NOART NOART NO.....FREQFREQFREQFREQFREQ..... DIADIADIADIADIA..... "A""A""A""A""A" "B""B""B""B""B" FREQFREQFREQFREQFREQ..... DIADIADIADIADIA..... "A""A""A""A""A" "B""B""B""B""B"

    1.0 mHz .250" .400" .500" SUC 602 5.0 mHz .250" .375" .400" SUC 166-5*

    1.0 mHz .370" .525" .500" SUC 157-1 5.0 mHz .312" .465" .500" SUC 166-2

    1.0 mHz .500" .650" .625" SUC 170 5.0 mHz .312" .525" .500" SUC 165

    1.0 mHz .750" .900" 1.00" SUC 156 5.0 mHz .375" .650" .625" SUC 164

    1.0 mHz 1.00" 1.15" 1.25" SUC 155 5.0 mHz .500" .900" .625" SUC 477

    2.25 mHz .250" .400" .500" SUC 162 5.0 mHz .750" .900" 1.00" SUC 163

    2.25 mHz .310" .465" .500" SUC 161-1 10.0 mHz .120" .140" .800" SUC 175-1/MD*

    2.25 mHz .370" .525" .500" SUC 161 10.0 mHz .125" .190" .800" SUC 175*

    2.25 mHz .500" .650" .625" SUC 160 10.0 mHz .187" .250" .400" SUC 168-1A*

    2.25 mHz .750" .900" 1.00" SUC 159 10.0 mHz .187" .312" .500" SUC 168-1*2.25 mHz 1.00" 1.125" 1.25" SUC 158 10.0 mHz .250" .312" .400" SUC 168B*

    2.25 mHz 1.125" 1.275" 1.25" SUC 238 10.0 mHz .250" .350" .400" SUC 168A*

    5.0 mHz .187" .250" .300" SUC 166-1B 10.0 mHz .250" .375" .500" SUC 168*

    5.0 mHz .187" .250" .500" SUC 166-1A* 10.0 mHz .250" .375" .750" SUC 726*

    5.0 mHz .187" .312" .500" SUC 166-1* 10.0 mHz .312" .465" .500" SUC 168-2

    5.0 mHz .187" .312" .500" SUC 166-4* 10.0 mHz .375" .525" .500" SUC 167

    5.0 mHz .250" .375" .400" SUC 169* 10.0 mHz .500" .650" 1.00" SUC 167-2

    5.0 mHz .250" .375" .500" SUC 166* 10.0 mHz .500" .650" .625" SUC 167-1

    5.0 mHz .250" .375" .750" SUC 706* 15.0 mHz .125" .250" .400" SUC 180

    5.0 mHz .250" .375" 1.25" SUC 166-3* *Smooth, no-knurl grip for use with angle wedges (page 53)

    NDT Engineering CorporationPh (253)872-3565 Fax (253)872-0857

    "B"

    "A"

  • 8/10/2019 UT Transducers

    8/20

    Delay LineDelay LineDelay LineDelay LineDelay Line

    Page 7

    PERMANENTPERMANENTPERMANENTPERMANENTPERMANENT REPLACEABLEREPLACEABLEREPLACEABLEREPLACEABLEREPLACEABLE

    FREQUENCYFREQUENCYFREQUENCYFREQUENCYFREQUENCY ELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZE DELADELADELADELADELAYYYYY DIADIADIADIADIA.......... HEIGHTHEIGHTHEIGHTHEIGHTHEIGHT DELADELADELADELADELAYYYYY DIADIADIADIADIA.......... HEIGHTHEIGHTHEIGHTHEIGHTHEIGHT

    1.0 mHz .500" SCD 150 .620" .650" SCDR 150 .900" .850"

    2.25 mHz .250" SCD 225 .375" .600" SCDR 225 .575" .650"

    2.25 mHz .375" SCD 237 .520" .625" SCDR 237 .750" .750"

    2.25 mHz .500" SCD 250 .620" .650" SCDR 250 .900" .850"

    5.0 mHz .250" SCD 525 .375" .600" SCDR 525 .575" .650"

    5.0 mHz .375" SCD 537 .520" .625" SCDR 537 .750" .750"

    5.0 mHz .500" SCD 550 .620" .650" SCDR 550 .900" .850"

    5.0 mHz .750" SCD 575 .900" .700" SCDR 575 1.25" .950"

    5.0 mHz 1.00" SCD 5100 1.15" 1.00" SCDR 5100 1.50" 1.20"

    10.0 mHz .125' SCD 1012 .300" .600" SCDR 1012 .390" .600"10.0 mHz .250' SCD 1025 .375" .600" SCDR 1025 .575" .650"

    10.0 mHz .375" SCD 1037 .520" .625" SCDR 1037 .750" .750"

    10.0 mHz .500" SCD 1050 .620" .650" SCDR 1050 .900" .850"

    15.0 mHz .125" SCD 1512 .300" .600" SCDR 1512 .390" .600"

    15.0 mHz .250" SCD 1525 .375" .600" SCDR 1525 .575" .650"

    15.0 mHz .375" SCD 1537 .520" .625" SCDR 1537 .750" .750"

    15.0 mHz .500" SCD 1550 .620" .650" SCDR 1550 .900" .850"

    20-25 mHz .125" SCD 2012 .300" .600" SCDR 2012 .390" .600"

    20-25 mHz .250" SCD 2025 .375" .600" SCDR 2025 .575" .650"

    20-25 mHz .375" SCD 2037 .520" .625" SCDR 2037 .750" .750"

    website: www.ndteng.comemail: [email protected]

    Height

    Dia.

    Height

    Dia.

  • 8/10/2019 UT Transducers

    9/20

  • 8/10/2019 UT Transducers

    10/20

    Page 9

    Dua l Ele m e nt - RDua l Ele m e nt - RDua l Ele m e nt - RDua l Ele m e nt - RDua l Ele m e nt - Re c t a n g u l a r e c t a n g u l a r e c t a n g u l a r e c t a n g u l a r e c t a n g u l a r

    PART NUMBERPART NUMBERPART NUMBERPART NUMBERPART NUMBER HOUSING DIMENSIONSHOUSING DIMENSIONSHOUSING DIMENSIONSHOUSING DIMENSIONSHOUSING DIMENSIONSFREQUENCYFREQUENCYFREQUENCYFREQUENCYFREQUENCY ELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZE HEIGHTHEIGHTHEIGHTHEIGHTHEIGHT LENGTHLENGTHLENGTHLENGTHLENGTH WIDTHWIDTHWIDTHWIDTHWIDTH

    1.0 mHz .50" x .50" SUDR 155 .650" .800" .850"

    1.0 mHz .50" x 1.0" SUDR 151 .650" 1.15" .850"2.25 mHz .50" x .50" SUDR 255 .650" .800" .850"

    2.25 mHz .50" x 1.0" SUDR 251 .650" 1.15" .850"

    3.5 mHz .50" x .50" SUDR 355 .650" .800" .850"

    3.5 mHz .50" x 1.0" SUDR 351 .650" 1.15" .850"

    5.0 mHz .50" x .50" SUDR 555 .650" .800" .850"

    5.0 mHz .50" x 1.0" SUDR 551 .650" 1.15" .850"

    10.0 mHz .50" x .50" SUDR 1055 .650" .800" .850"

    10.0 mHz .50" x 1.0" SUDR 1051 .650" 1.15" .850"

    15.0 mHz .50" x .50" SUDR 1555 .650" .800" .850"

    15.0 mHz .50" x 1.0" SUDR 1551 .650" 1.15" .850"

    website: www.ndteng.comemail: [email protected]

    Height

    Length Width

  • 8/10/2019 UT Transducers

    11/20

    SHEA

    RWAVETRANSDUCERS

    Page 10

    MMMMMiiiiicccccrrrrroooooM iM iM iM iM iniatuniatuniatuniatuniaturrrrreeeee

    ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO..... ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO.....FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL

    2.25 mHz 350 SX 235AS SX 235SS 2.25 mHz 350 SX 235AT SX 235ST

    2.25 mHz 450 SX 245AS SX 245SS 2.25 mHz 450 SX 245AT SX 245ST

    2.25 mHz 600 SX 260AS SX 260SS 2.25 mHz 600 SX 260AT SX 260ST

    2.25 mHz 700 SX 270AS SX 270SS 2.25 mHz 700 SX 270AT SX 270ST

    2.25 mHz 900

    SX 290AS SX 290SS 2.25 mHz 900

    SX 290AT SX 290ST5.0 mHz 350 SX 535AS SX 535SS 5.0 mHz 350 SX 535AT SX 535ST

    5.0 mHz 450 SX 545AS SX 545SS 5.0 mHz 450 SX 545AT SX 545ST

    5.0 mHz 600 SX 560AS SX 560SS 5.0 mHz 600 SX 560AT SX 560ST

    5.0 mHz 700 SX 570AS SX 570SS 5.0 mHz 700 SX 570AT SX 570ST

    5.0 mHz 900 SX 590AS SX 590SS 5.0 mHz 900 SX 590AT SX 590ST

    10.0 mHz 350 SX 1035AS SX 1035SS 10.0 mHz 350 SX 1035AT SX 1035ST

    10.0 mHz 450 SX 1045AS SX 1045SS 10.0 mHz 450 SX 1045AT SX 1045ST

    10.0 mHz 600 SX 1060AS SX 1060SS 10.0 mHz 600 SX 1060AT SX 1060ST

    10.0 mHz 700 SX 1070AS SX 1070SS 10.0 mHz 700 SX 1070AT SX 1070ST

    10.0 mHz 900 SX 1090AS SX 1090SS 10.0 mHz 900 SX 1090AT SX 1090ST

    NDT Engineering CorporationPh(253)872-3565 Fax(253)872-0857

    Top Mount ConnectorSide Mount Connector

    .375" .250"

    .375"

    .375" .250"

    .375"

  • 8/10/2019 UT Transducers

    12/20

    Page 1

    ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO..... ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO.....FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL

    2.25 mHz 350 SUSM 235AS SUSM 235SS 2.25 mHz 350 SUSM 235AT SUSM 235ST

    2.25 mHz 450 SUSM 245AS SUSM 245SS 2.25 mHz 450 SUSM 245AT SUSM 245ST

    2.25 mHz 600 SUSM 260AS SUSM 260SS 2.25 mHz 600 SUSM 260AT SUSM 260ST

    2.25 mHz 700 SUSM 270AS SUSM 270SS 2.25 mHz 700 SUSM 270AT SUSM 270ST

    2.25 mHz 900

    SUSM 290AS SUSM 290SS 2.25 mHz 900

    SUSM 290AT SUSM 290ST5.0 mHz 350 SUSM 535AS SUSM 535SS 5.0 mHz 350 SUSM 535AT SUSM 535ST

    5.0 mHz 450 SUSM 545AS SUSM 545SS 5.0 mHz 450 SUSM 545AT SUSM 545ST

    5.0 mHz 600 SUSM 560AS SUSM 560SS 5.0 mHz 600 SUSM 560AT SUSM 560ST

    5.0 mHz 700 SUSM 570AS SUSM 570SS 5.0 mHz 700 SUSM 570AT SUSM 570ST

    5.0 mHz 900 SUSM 590AS SUSM 590SS 5.0 mHz 900 SUSM 590AT SUSM 590ST

    10.0 mHz 350 SUSM 1035AS SUSM 1035SS 10.0 mHz 350 SUSM 1035AT SUSM 1035ST

    10.0 mHz 450 SUSM 1045AS SUSM 1045SS 10.0 mHz 450 SUSM 1045AT SUSM 1045ST

    10.0 mHz 600 SUSM 1060AS SUSM 1060SS 10.0 mHz 600 SUSM 1060AT SUSM 1060ST

    10.0 mHz 700 SUSM 1070AS SUSM 1070SS 10.0 mHz 700 SUSM 1070AT SUSM 1070ST

    10.0 mHz 900 SUSM 1090AS SUSM 1090SS 10.0 mHz 900 SUSM 1090AT SUSM 1090ST

    SuSuSuSuSubbbbb M iM iM iM iM iniatuniatuniatuniatuniaturrrrreeeee

    website: www.ndteng.comemail: [email protected]

    Side Mount Connector Top Mount Connector

    Color Coded Frequency * For a .400" height add a -1-1-1-1-12.25 MHZ RED CARED CARED CARED CARED CASESESESESE to end of part number.

    5.0 MHZ GREEN CAGREEN CAGREEN CAGREEN CAGREEN CASESESESESE Example:SUSM235ASUSM235ASUSM235ASUSM235ASUSM235ASSSSS-1-1-1-1-110.0 MHZ BLBLBLBLBLUE CAUE CAUE CAUE CAUE CASESESESESE

    .550" .250'

    .450"*

    .550" .250'

    .450"

    Color Coded Frequency * For a .400" height add a -1-1-1-1-12.25 MHZ RED CARED CARED CARED CARED CASESESESESE to end of part number.

    5.0 MHZ GREEN CAGREEN CAGREEN CAGREEN CAGREEN CASESESESESE Example:SUSM235ASUSM235ASUSM235ASUSM235ASUSM235ASSSSS-1-1-1-1-110.0 MHZ BLBLBLBLBLUE CAUE CAUE CAUE CAUE CASESESESESE

  • 8/10/2019 UT Transducers

    13/20

    SHEA

    RWAVETRANSDUCERS

    Page 12

    ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO..... ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO.....FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL

    2.25 mHz 350 SUM 235AS SUM 235SS 2.25 mHz 350 SUM 235AT SUM 235ST

    2.25 mHz 450 SUM 245AS SUM 245SS 2.25 mHz 450 SUM 245AT SUM 245ST

    2.25 mHz 600 SUM 260AS SUM 260SS 2.25 mHz 600 SUM 260AT SUM 260ST

    2.25 mHz 700 SUM 270AS SUM 270SS 2.25 mHz 700 SUM 270AT SUM 270ST

    2.25 mHz 900

    SUM 290AS SUM 290SS 2.25 mHz 900

    SUM 290AT SUM 290ST5.0 mHz 350 SUM 535AS SUM 535SS 5.0 mHz 350 SUM 535AT SUM 535ST

    5.0 mHz 450 SUM 545AS SUM 545SS 5.0 mHz 450 SUM 545AT SUM 545ST

    5.0 mHz 600 SUM 560AS SUM 560SS 5.0 mHz 600 SUM 560AT SUM 560ST

    5.0 mHz 700 SUM 570AS SUM 570SS 5.0 mHz 700 SUM 570AT SUM 570ST

    5.0 mHz 900 SUM 590AS SUM 590SS 5.0 mHz 900 SUM 590AT SUM 590ST

    10.0 mHz 350 SUM 1035AS SUM 1035SS 10.0 mHz 350 SUM 1035AT SUM 1035ST

    10.0 mHz 450 SUM 1045AS SUM 1045SS 10.0 mHz 450 SUM 1045AT SUM 1045ST

    10.0 mHz 600 SUM 1060AS SUM 1060SS 10.0 mHz 600 SUM 1060AT SUM 1060ST

    10.0 mHz 700 SUM 1070AS SUM 1070SS 10.0 mHz 700 SUM 1070AT SUM 1070ST

    10.0 mHz 900 SUM 1090AS SUM 1090SS 10.0 mHz 900 SUM 1090AT SUM 1090ST

    NDT Engineering CorporationPh(253)872-3565 Fax(253)872-0857

    M iM iM iM iM in ia tu n ia tu n ia tu n ia tu n ia tu rrrrreeeee

    Top Mount ConnectorSide Mount Connector

    COLOR CODED FREQUENCY2.25 MHZ RED CARED CARED CARED CARED CASESESESESE5.0 MHZ GREEN CAGREEN CAGREEN CAGREEN CAGREEN CASESESESESE10.0 MHZ BLBLBLBLBLUE CAUE CAUE CAUE CAUE CASESESESESE

    COLOR CODED FREQUENCY2.25 MHZ RED CARED CARED CARED CARED CASESESESESE5.0 MHZ GREEN CAGREEN CAGREEN CAGREEN CAGREEN CASESESESESE10.0 MHZ BLBLBLBLBLUE CAUE CAUE CAUE CAUE CASESESESESE

    .500"

    .370".750"

    .500"

    .370".750"

  • 8/10/2019 UT Transducers

    14/20

    Page 13

    ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO..... ELEMENTELEMENTELEMENTELEMENTELEMENT PPPPPART NOART NOART NOART NOART NO.....FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL FREQFREQFREQFREQFREQ..... ANGLEANGLEANGLEANGLEANGLE ALALALALALUMINUMUMINUMUMINUMUMINUMUMINUM STEELSTEELSTEELSTEELSTEEL

    2.25 mHz 350 SU 235AS SU 235SS 2.25 mHz 350 S 235AS S 235SS

    2.25 mHz 450 SU 245AS SU 245SS 2.25 mHz 450 S 245AS S 245SS

    2.25 mHz 600 SU 260AS SU 260SS 2.25 mHz 600 S 260AS S 260SS

    2.25 mHz 700 SU 270AS SU 270SS 2.25 mHz 700 S 270AS S 270SS

    2.25 mHz 900

    SU 290AS SU 290SS 2.25 mHz 900

    S 290AS S 290SS5.0 mHz 350 SU 535AS SU 535SS 5.0 mHz 350 S 535AS S 535SS

    5.0 mHz 450 SU 545AS SU 545SS 5.0 mHz 450 S 545AS S 545SS

    5.0 mHz 600 SU 560AS SU 560SS 5.0 mHz 600 S 560AS S 560SS

    5.0 mHz 700 SU 570AS SU 570SS 5.0 mHz 700 S 570AS S 570SS

    5.0 mHz 900 SU 590AS SU 590SS 5.0 mHz 900 S 590AS S 590SS

    10.0 mHz 350 SU 1035AS SU 1035SS 10.0 mHz 350 S 1035AS S 1035SS

    10.0 mHz 450 SU 1045AS SU 1045SS 10.0 mHz 450 S 1045AS S 1045SS

    10.0 mHz 600 SU 1060AS SU 1060SS 10.0 mHz 600 S 1060AS S 1060SS

    10.0 mHz 700 SU 1070AS SU 1070SS 10.0 mHz 700 S 1070AS S 1070SS

    10.0 mHz 900 SU 1090AS SU 1090SS 10.0 mHz 900 S 1090AS S 1090SS

    website: www.ndteng.comemail: [email protected]

    .....333337777755555"""""EEEEEl eme l eme l eme l eme l eme nnnnnttttt .....555550000000000"""""EEEEEl eme l eme l eme l eme l eme nnnnnttttt

    .800"

    .600"1.03"

    .750"

    .500".950"

  • 8/10/2019 UT Transducers

    15/20

    Page 14

    TTTTTransducers ransducers ransducers ransducers ransducers

    QUIC

    KFIT

    TRANSD

    UCERS

    FREQUENCYFREQUENCYFREQUENCYFREQUENCYFREQUENCY ELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZEELEMENT SIZE PPPPPART NUMBERART NUMBERART NUMBERART NUMBERART NUMBER PART NUMBERPART NUMBERPART NUMBERPART NUMBERPART NUMBER PART NUMBERPART NUMBERPART NUMBERPART NUMBERPART NUMBER

    1.0 mHz .187" QF 118S QF 118T QFM 118T

    1.0 mHz .250" QF 125S QF 125T QFM 125T1.0 mHz .312" QF 131S QF 131T ------------

    2.25 mHz .187" QF 218S QF 218S QFM 218T

    2.25 mHz .250" QF 225S QF 225S QFM 225T

    2.25 mHz .312" QF 231S QF 231S ------------

    5.0 mHz .187" QF 518S QF 518S QFM 518T

    5.0 mHz .250" QF 525S QF 525S QFM 525T

    5.0 mHz .312" QF 531S QF 531S ------------

    10.0 mHz .187' QF 1018S QF 1018S QFM 1018T

    10.0 mHz .250" QF 1025S QF 1025S QFM 1025T

    10.0 mHz .312" QF 1031S QF 1031S ------------

    NDT Engineering CorporationPh(253)872-3565 Fax(253)872-0857

    StandardStandardStandardStandardStandardw/Side Mount Connectorw/Side Mount Connectorw/Side Mount Connectorw/Side Mount Connectorw/Side Mount Connector

    .800"

    .370"

    .800"

    .370"

    .420"

    .420"

    Rubber

    O-Rings(typ)

    StandardStandardStandardStandardStandardw/Tw/Tw/Tw/Tw/Top Mount Connectorop Mount Connectorop Mount Connectorop Mount Connectorop Mount Connector

    MiniatureMiniatureMiniatureMiniatureMiniaturew/Tw/Tw/Tw/Tw/Top Mount Connectorop Mount Connectorop Mount Connectorop Mount Connectorop Mount Connector

  • 8/10/2019 UT Transducers

    16/20

    Page 15

    WWWWWe d g e s e d g e s e d g e s e d g e s e d g e s

    PART NOPART NOPART NOPART NOPART NO..... DIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONS PART NOPART NOPART NOPART NOPART NO..... DIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSANGLEANGLEANGLEANGLEANGLE ALALALALALUMUMUMUMUM STEELSTEELSTEELSTEELSTEEL AAAAA BBBBB ANGLEANGLEANGLEANGLEANGLE ALALALALALUMUMUMUMUM STEELSTEELSTEELSTEELSTEEL AAAAA

    300 QFW 30A QFW 30S .700" .500" 300 QFMW 30S QFMW 30S .650"

    350

    QFW 35A QFW 35S .700" .500" 350

    QFMW 35S QFMW 35S .650"400 QFW 40A QFW 40S .700" .500" 400 QFMW 40S QFMW 40S .650"

    450 QFW 45A QFW 45S .700" .500" 450 QFMW 45S QFMW 45S .700"

    500 QFW 50A QFW 50S .815" .525" 500 QFMW 50S QFMW 50S .700"

    550 QFW 55A QFW 55S .815" .525" 550 QFMW 55S QFMW 55S .750"

    600 QFW 60A QFW 60S .815" .525" 600 QFMW 60S QFMW 60S .750"

    650 QFW 65A QFW 65S .815" .525" 650 QFMW 65S QFMW 65S .750"

    700 QFW 70A QFW 70S 1.00" .550" 700 QFMW 70S QFMW 70S .800"

    750 QFW 75A QFW 75S 1.00" .550" 750 QFMW 75S QFMW 75S .800"

    800 QFW 80A QFW 80S 1.00" .550" 800 QFMW 80S QFMW 80S 1.00"

    900 QFW 90A QFW 90S 1.20" .550" 900 QFMW 90S QFMW 90S 1.10"

    website: www.ndteng.comemail: [email protected]

    .500"A

    B

    A

    .430"

    .425"

  • 8/10/2019 UT Transducers

    17/20

    IMMERSIONTRANSD

    UCERS

    Page 16

    StandardStandardStandardStandardStandard

    FREQUENCYFREQUENCYFREQUENCYFREQUENCYFREQUENCY .187" ELEMENT.187" ELEMENT.187" ELEMENT.187" ELEMENT.187" ELEMENT .250" ELEMENT.250" ELEMENT.250" ELEMENT.250" ELEMENT.250" ELEMENT .375" ELEMENT.375" ELEMENT.375" ELEMENT.375" ELEMENT.375" ELEMENT .500" ELEMENT.500" ELEMENT.500" ELEMENT.500" ELEMENT.500" ELEMENT

    1.0 mHz SUI 118 SUI 125 SUI 137 SUI 150

    2.25 mHz SUI 218 SUI 225 SUI 237 SUI 250

    5.0 mHz SUI 518 SUI 525 SUI 537 SUI 550

    10.0 mHz SUI 1018 SUI 1025 SUI 1037 SUI 1050

    15.0 mHz SUI 1518 SUI 1525 SUI 1537 SUI 1550

    20-25 mHz SUI 2018 SUI 2025 SUI 2037 SUI 2050

    NDT Engineering CorporationPh(253)872-3565 Fax(253)872-0857

    1.5"

    .625" .750"

    .125"

  • 8/10/2019 UT Transducers

    18/20

    Slim -Slim -Slim -Slim -Slim -LineLineLineLineLine

    Page 17

    FREQUENCYFREQUENCYFREQUENCYFREQUENCYFREQUENCY .187" ELEMENT.187" ELEMENT.187" ELEMENT.187" ELEMENT.187" ELEMENT .250" ELEMENT.250" ELEMENT.250" ELEMENT.250" ELEMENT.250" ELEMENT .375" ELEMENT.375" ELEMENT.375" ELEMENT.375" ELEMENT.375" ELEMENT .500" ELEMENT.500" ELEMENT.500" ELEMENT.500" ELEMENT.500" ELEMENT

    1.0 mHz SUSI 118 SUSI 125 SUSI 137 SUSI 150

    2.25 mHz SUSI 218 SUSI 225 SUSI 237 SUSI 250

    5.0 mHz SUSI 518 SUSI 525 SUSI 537 SUSI 550

    10.0 mHz SUSI 1018 SUSI 1025 SUSI 1037 SUSI 1050

    15.0 mHz SUSI 1518 SUSI 1525 SUSI 1537 SUSI 1550

    20-25 mHz SUSI 2018 SUSI 2025 SUSI 2037 SUSI 2050

    website: www.ndteng.comemail: [email protected]

    .625" Diameter

    .600"

    1.5"

    .375"

  • 8/10/2019 UT Transducers

    19/20

    UTCABELS,GUIDES&CERTS

    Page 18

    C a b le s & Exten sio nsC a b le s & Exten sio nsC a b le s & Exten sio nsC a b le s & Exten sio nsC a b le s & Exten sio ns C ustom Kits & G uid e sC ustom Kits & G uid e sC ustom Kits & G uid e sC ustom Kits & G uid e sC ustom Kits & G uid e s

    DESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTIONDESCRIPTION PART NUMBERPART NUMBERPART NUMBERPART NUMBERPART NUMBER LENGTHLENGTHLENGTHLENGTHLENGTH AIRCRAFT/HELICOPTERAIRCRAFT/HELICOPTERAIRCRAFT/HELICOPTERAIRCRAFT/HELICOPTERAIRCRAFT/HELICOPTER

    6' BNC to Microdot CBM-6 6 Feet Apache A-64

    12' BNC to Microdot CBM-12 12 Feet Apache UH-60

    15' BNC to Microdot CBM-15 15 Feet B2 Bomber

    6' BNC to Right Angle Microdot CBMR-6 6 Feet F-15 Falcon

    12' BNC to Right Angle Microdot CBMR-12 12 Feet F-16 Tomcat15' BNC to Right Angle Microdot CBMR-15 15 Feet FA-18 Hornet

    6' BNC to BNC CBB-6 6 Feet C-130 Transport

    12' BNC to BNC CBB-12 12 Feet C-5A

    6' Miniature Microdot to BNC CBMM-6 6 Feet C-141

    6' Dual BNC's to Dual Microdot's CBMD-6 6 Feet

    6' Dual BNC's to 2-Pin Microdot C2B-2M-6 6 Feet

    10"Female Microdot to Male AMF-MR-10 10 Inches

    Right Angle Microdot

    10"Female Microdot to AMF-M-10 10 Inches

    Male Microdot

    NDT Engineering Corporation remains highly

    dedicated to its position as a leading provider

    of custom made UT kits, that include certified

    transducers, reference standards and guides

    This means that we will work with you on any

    special project at no additional cost until a

    workable solution has been achieved.

    In addition to providing guides and positioners

    for all major airplane manufacturers, we have

    also been responsible for projects on the

    following military aircraft:

    NDT Engineering CorporationPh(253)872-3565 Fax(253)872-0857

    CBMR-6

    CBM-6

    CBB-6

  • 8/10/2019 UT Transducers

    20/20