UNIVERSAL TUBE & ROLLFORM SPECIALIZING IN … · TIG Tube Mills ... - Ease of Operation - Installation Services - Training Services - Documentation for Retrofits 419-872-2364 •

WORKING TOGETHER WITH UNIVERSALCONTROLS GROUP TO OFFER YOU MORE!

CREATORS OF THE UTRAKTM LENGTH CONTROL SYSTEM FORFLYING CUT-OFFS & THE HAVENTRAKTM FLYING SHEAR.

Our capabilities go even further, working together with Universal Controls Group (UCG) to bring you the options you need such as new controls, drive systems, die accelerators,

length control and other accessories to retrofit your existing machinery.UCG has also built multi motor drive systems exceeding 1000 HP. The Drives

are self-contained eliminating the need for multi-cabinet systems. Hence, the installation cost becomes drastically reduced.

SPECIALIZING IN USED AND RECONDITIONED TUBE,PIPE & ROLLFORM MACHINERY FOR 30 YEARS.

Universal Tube & Rollform has always been committed to being the number one supplierof used tube, pipe and rollform machinery in the world. We have one of the largest selectionsof used tube and pipe mills available. Utilizing over 125,000 square feet of warehouse space, we also stock rollformers, cut to length lines, slitting lines, High Frequency welders and more.

We have the resources and expertise to satisfy your company's machinery needs.

TURN-KEY CAPABILITIES:

We Buy & Sell

ITA

NEW Controls & Drive Systems Recondition, Re-Power & UpgradeLarge Inventory of used Tube Mills,Pipe Mills and Rollformers

Universal Tube & Rollform Equipment Corporation

Universal Tube & Rollform Equipment Corporation and Universal Controls Group reserve the right to change any and all information in this catalog without notice.Care is taken to give reliable descriptions but these are not guaranteed. Prospective purchasers are advised to check vital details. We reserve the right to correct

stenographic errors. All machinery is subject to prior sale. Visit www.utubeonline.com for conditions of sale.

Universal Tube & Rollform Equipment CorporationUniversal Controls Group 26202 Glenwood Rd. Perrysburg Ohio 43551 USA • [email protected]

•

UNIVERSAL TUBE & ROLLFORMEQUIPMENT CORPORATIONInternational Used Metalworking Machinery Dealer

• • • • • •• • • •

• • • • • •• • • •

• • • • • •• • • •

••

•••

••••

•


WE BUY & SELL - CASH FOR YOUR SURPLUS MACHINERY.Always buying used Tube, Pipe andRollform Machinery. Contact us toreceive an offer on your surplus.

We Buy & Sell - One machine or an entire plant.

NEW DRIVES, NEW CONTROLS, AND NEW COMPONENTS.Working together with Universal Controls Group (UCG) to offer you more.

NEW Drives, Controls & Length Control Systems.

Schedule a visit to our 125,000 sq. ft. warehouse to inspect the machine(s) of your interest.

Tube Mills - Pipe Mills - High Frequency WeldersStraighteners - Benders - Deburrers - Tube Cut-OffsSwagers - End Formers - Uncoilers - AccumulatorsRollformers - Sheet Cut-Offs - Cut-To-Length LinesSlitting Lines - Flatteners & More!

Search our entire Inventory at:

LARGE INVENTORY OF USED TUBE, PIPE & ROLLFORM MACHINERY.

Recondition, Re-Power & Upgrade Capabilities

MACHINERY RECONDITIONING, REBUILDING & RE-POWERING.- Outstanding Cost Savings- More Accurate Production- Enhanced Safety- Extended Machine Life

- Ease of Operation- Installation Services- Training Services- Documentation for Retrofits

419-872-2364 • www.utubeonline.comwww.universalcontrolsgroup.com

26202 Glenwood Rd. • Perrysburg, OH 43551 USA • FAX: 419-874-2825

CATALOG SECTIONS BY COLOR:

Tube & Pipe Mills Tube & Pipe Machinery RollformersSheet & Strip MachineryEntry Line Machinery

HOW TO READ THIS CATALOG:

MACHINERY SPECIFICATIONS:In-Stock MachineryIn-Stock Machinery

New In-Stock Tube & Pipe MachineryNew In-Stock Sheet & Strip Machinery

NEW / Never Used In-Stock Machinery

New In-Stock Entry Line Machinery

TBD *TO BE DETERMINEDNR *NOT RATED

NOTE: Please contact us for more information regarding specifications including *TBD (To be determined) or *NR (Not rated).

Care is taken to give reliable descriptions but these are not guaranteed. Prospective purchasers are advised to check vital details. We reserve the right to correct stenographic errors. All machinery is subject to prior sale. Visit www.utubeonline.com for conditions of sale.

CATALOG TABLE OF CONTENTS

Tube & Pipe Machinery ................................................................................ 8-17High Frequency / ERW Tube Mills ..............................................................TIG Tube Mills .........................................................................................High Frequency Welders ...........................................................................Preheat / Anneal .....................................................................................NEW! Components & Accessories ...............................................................Tube Cut-Offs .........................................................................................Tube Re-Cuts .........................................................................................NEW! UTRAK Length Control System for Flying Cut-Offs ...............................Tube Straighteners .................................................................................Tube Benders ........................................................................................Tube End Formers ..................................................................................Tube Deburrers ......................................................................................Tube Swagers ........................................................................................

8-991011111213141515161717

Sheet & Strip Machinery .............................................................................. 18-27Cut-Off Presses ......................................................................................Rollformers ............................................................................................Reconditioning Services ...........................................................................Rolling Mills ............................................................................................Accumulators .........................................................................................Flatteners ..............................................................................................Slitters ..................................................................................................

18-1920-242526262627

Entry Line Machinery ................................................................................... 4-7Uncoilers ...............................................................................................Shear & End Welders ...............................................................................

4-67

Machinery recently added to our Inventory is indicated by this icon. Always check our website for the latest arrivals.

NEW / never used machines are indicated by this icon. (pgs. 6, 8, 10, 11, 12, 14, 26)

NEW INSTOCK! NEW INSTOCK!

NEW! NEW!

• • • • • •• • • •

• • • • • •• • • •

• • • • • •• • • •

••

•••

••••

•


WE BUY & SELL - CASH FOR YOUR SURPLUS MACHINERY.Always buying used Tube, Pipe andRollform Machinery. Contact us toreceive an offer on your surplus.

We Buy & Sell - One machine or an entire plant.

NEW DRIVES, NEW CONTROLS, AND NEW COMPONENTS.Working together with Universal Controls Group (UCG) to offer you more.

NEW Drives, Controls & Length Control Systems.

Schedule a visit to our 125,000 sq. ft. warehouse to inspect the machine(s) of your interest.

Tube Mills - Pipe Mills - High Frequency WeldersStraighteners - Benders - Deburrers - Tube Cut-OffsSwagers - End Formers - Uncoilers - AccumulatorsRollformers - Sheet Cut-Offs - Cut-To-Length LinesSlitting Lines - Flatteners & More!

Search our entire Inventory at:

LARGE INVENTORY OF USED TUBE, PIPE & ROLLFORM MACHINERY.

Recondition, Re-Power & Upgrade Capabilities

MACHINERY RECONDITIONING, REBUILDING & RE-POWERING.- Outstanding Cost Savings- More Accurate Production- Enhanced Safety- Extended Machine Life

- Ease of Operation- Installation Services- Training Services- Documentation for Retrofits

419-872-2364 • www.utubeonline.comwww.universalcontrolsgroup.com

26202 Glenwood Rd. • Perrysburg, OH 43551 USA • FAX: 419-874-2825

CATALOG SECTIONS BY COLOR:

Tube & Pipe Mills Tube & Pipe Machinery RollformersSheet & Strip MachineryEntry Line Machinery

HOW TO READ THIS CATALOG:

MACHINERY SPECIFICATIONS:In-Stock MachineryIn-Stock Machinery

New In-Stock Tube & Pipe MachineryNew In-Stock Sheet & Strip Machinery

NEW / Never Used In-Stock Machinery

New In-Stock Entry Line Machinery

TBD *TO BE DETERMINEDNR *NOT RATED

NOTE: Please contact us for more information regarding specifications including *TBD (To be determined) or *NR (Not rated).

Care is taken to give reliable descriptions but these are not guaranteed. Prospective purchasers are advised to check vital details. We reserve the right to correct stenographic errors. All machinery is subject to prior sale. Visit www.utubeonline.com for conditions of sale.

CATALOG TABLE OF CONTENTS

Tube & Pipe Machinery ................................................................................ 8-17High Frequency / ERW Tube Mills ..............................................................TIG Tube Mills .........................................................................................High Frequency Welders ...........................................................................Preheat / Anneal .....................................................................................NEW! Components & Accessories ...............................................................Tube Cut-Offs .........................................................................................Tube Re-Cuts .........................................................................................NEW! UTRAK Length Control System for Flying Cut-Offs ...............................Tube Straighteners .................................................................................Tube Benders ........................................................................................Tube End Formers ..................................................................................Tube Deburrers ......................................................................................Tube Swagers ........................................................................................

8-991011111213141515161717

Sheet & Strip Machinery .............................................................................. 18-27Cut-Off Presses ......................................................................................Rollformers ............................................................................................Reconditioning Services ...........................................................................Rolling Mills ............................................................................................Accumulators .........................................................................................Flatteners ..............................................................................................Slitters ..................................................................................................

18-1920-242526262627

Entry Line Machinery ................................................................................... 4-7Uncoilers ...............................................................................................Shear & End Welders ...............................................................................

4-67

Machinery recently added to our Inventory is indicated by this icon. Always check our website for the latest arrivals.

NEW / never used machines are indicated by this icon. (pgs. 6, 8, 10, 11, 12, 14, 26)

NEW INSTOCK! NEW INSTOCK!

NEW! NEW!

Entry

Lin

e M

achi

nery

419-872-2364 | F: 419-874-2825 | www.utubeonline.com | [email protected] Glenwood Rd. Perrysburg OH 43551 USA

UNIVERSAL TUBE & ROLLFORMEQUIPMENT CORPORATIONUNIVERSAL TUBE & ROLLFORMEQUIPMENT CORPORATION

4 5

#2750 #3103 NEW IN STOCK!#3038 #3024

For the full specifications of these machines, visit www.utubeonline.comFor the full specifications of these machines, visit www.utubeonline.com

ENTRY LINE UncoilersFor the full specifications of these machines, visit www.utubeonline.com

MAXIMUMCOIL O.D.

STOCKNUMBER

MODELNUMBERMANUFACTURER

MAXIMUMCOIL WIDTH TYPE

MAXIMUMCOIL WEIGHT

LITTELL2753 36.0"20,000 LB. 72.0" 1S200-36SINGLE

PAXON612A 48.0"20,000 LB. 72.0" TBDSINGLE

NEW INSTOCK!IOWA PRECISION3143 20,000 LB. 60.0" 20M48DHDOUBLE48.0" NEW INSTOCK!

AMERICAN STEEL LINE1939 25.0"6,000 LB. 60.0" 1000SINGLE

CUSTOM2984 28.0"6,000 LB. 72.0" TBDSINGLE

MECON2987 24.0"6,000 LB. 60.0" 60B-24SINGLE

ROWE2341 40.0"10,000 LB. 60.0" 10040-DSLSINGLE

YODER2732B 36.0"10,000 LB. 48.0" SINGLE TBD

LITTELL2034 32.0"6,000 LB. 60.0" TBDSINGLE

SEN FUNG3140 10,000 LB. 96.0" TBDSINGLE54.0" NEW INSTOCK!

AMERICAN STEEL LINE3139 54.0"10,000 LB. 72.0" 40-12SINGLE NEW INSTOCK!

ARKU3288 30.0"6,000 LB. 96.0" DR-60-30DOUBLE NEW INSTOCK!

JAYCO3284 36.0"6,000 LB. 60.0" JDRE-6036-1DOUBLE NEW INSTOCK!

AMERICAN STEEL LINE3254 36.0"10,000 LB. 60.0" TBDSINGLE NEW INSTOCK!

SESCO3255 36.0"15,000 LB. 72.0" 55-453SINGLE NEW INSTOCK!

TISHKEN3269 24.0"15,000 LB. 60.0" 5HX-24FM-HCCSINGLE NEW INSTOCK!

DAHLSTROM2750 48.0"20,000 LB. 72.0" 20H-48-150LSINGLE PHOTOBELOW

3038 10,000 LB. 72.0" SINGLE AMERICAN STEEL LINE TBD32.0" PHOTOBELOW

RLM3103 20.0"10,000 LB. 72.0" TBDDOUBLE NEW INSTOCK!PHOTOBELOW

EGAN2253 20.0"6,000 LB. 60.0" M601-20SINGLE

ROLLRIGHT2319 16.0"5,000 LB. 72.0" TBDDOUBLE 2 INSTOCK!

AUTOMATIC FEED18.0"5,000 LB. 72.0" 102472SINGLE1856

COOPER WEYMOUTH2990 24.0"5,000 LB. 60.0" SINGLE TBD

COOPER WEYMOUTH2877 18.0"5,000 LB. 60.0" DOUBLE TBD


COOPER WEYMOUTH2212 24.0"5,000 LB. 48.0" SINGLE 5000-24M

COOPER WEYMOUTH3127 18.0"5,000 LB. 60.0" DOUBLE 5000-18DP NEW INSTOCK!

GUILD3128 12.0"6,000 LB. 60.0" UC-1518-10DOUBLE NEW INSTOCK!

LITTELL3330 12.0"6,000 LB. 60.0" 6012DOUBLE NEW INSTOCK!

COOPER WEYMOUTH3024 18.0"5,000 LB. 60.0" DOUBLE 5000-D PHOTOBELOW

HUMPHRIES2789 24.0"4,500 LB. 60.0" AR45/24/DBDOUBLE

GARY3142 30.0"4,000 LB. 60.0" SINGLE 4904 NEW INSTOCK!


ENTRY LINE Uncoilers continuedFor the full specifications of these machines, visit www.utubeonline.com

MAXIMUMCOIL O.D.

STOCKNUMBER



MAXIMUMCOIL WEIGHT

MECON2988 20.0"4,000 LB. 60.0" TBDSINGLE

LITTELL1940 12.0”4,000 LB. 60.0" SINGLE 412-H7PDC40

COOPER WEYMOUTH2239 12.0"4,000 LB. 60.0" TBDSINGLE

LITTELL3132 12.0"4,000 LB. 60.0" 40-12DOUBLE NEW INSTOCK!

B&K2417A 12.0"4,000 LB. 48.0" TBDDOUBLE

WEDNESBURY1027 12.0"2,000 LB. 48.0" SINGLE TBD

LINTON & HIRTS2791 10.0"2,000 LB. 60.0" DOUBLE TBD

REGAL2576 20.0"3,000 LB. 60.0" 300012SRNPADBSINGLE

JAYBIRD2222 20.0"2,500 LB. 48.0" CR-18SINGLE

AMERICAN STEEL LINE1844 20.0"2,500 LB. 48.0" SINGLE TBD

COOPER WEYMOUTH2722 18.0"2,500 LB. 48.0" 2500-18DPDOUBLE

LITTELL2961 18.0"2,500 LB. 54.0" 25-18SINGLE

ASC2989 18.0"2,500 LB. 60.0" TBDSINGLE



COOPER WEYMOUTH448C 18.0"2,500 LB. 60.0" CWP 2500SINGLE

COOPER WEYMOUTH2790 12.0"2,500 LB. 60.0" SINGLE 2500-12

TISHKEN2044 12.0"2,500 LB. 60.0" HR-10SINGLE

BHP2792 21.0"2,200 LB. 60.0" SINGLE TBD


B&K2460 12.0"2,500 LB. 48.0" SINGLE TBD

AMERICAN STEEL LINE3295 18.0"2,500 LB. 60.0" 70DOUBLE NEW INSTOCK!PHOTOBELOW

COOPER WEYMOUTH3293 18.0"2,000 LB. 60.0" TBDSINGLE NEW INSTOCK!PHOTOBELOW

YODER447F 20.0"4,000 LB. 44.0" SINGLE TBD

LITTELL2035 24.0"4,000 LB. 60.0" SINGLE 40-24

AMERICAN STEEL LINE3286 30.0"4,000 LB. 60.0" 70DOUBLE NEW INSTOCK!

REGAL2721 12.0"4,000 LB. 60.0" 4000-12-SRNP-SDBSINGLE

CUSTOM2798 17.0"2,200 LB. 48.0" CUSTOMDOUBLE

CUSTOM2042 16.0"4,000 LB. 72.0" CUSTOMSINGLE

ROWE2213 20.0"4,000 LB. 60.0" SINGLE 4020-DSV

#3293 NEW IN STOCK!#3295

NEW IN STOCK! #2722

Entry Line Machinery

PHOTOBELOW

Entry

Lin

e M

achi

nery



4 5

#2750 #3103 NEW IN STOCK!#3038 #3024


ENTRY LINE UncoilersFor the full specifications of these machines, visit www.utubeonline.com

MAXIMUMCOIL O.D.

STOCKNUMBER



MAXIMUMCOIL WEIGHT

LITTELL2753 36.0"20,000 LB. 72.0" 1S200-36SINGLE

PAXON612A 48.0"20,000 LB. 72.0" TBDSINGLE

NEW INSTOCK!IOWA PRECISION3143 20,000 LB. 60.0" 20M48DHDOUBLE48.0" NEW INSTOCK!


CUSTOM2984 28.0"6,000 LB. 72.0" TBDSINGLE

MECON2987 24.0"6,000 LB. 60.0" 60B-24SINGLE

ROWE2341 40.0"10,000 LB. 60.0" 10040-DSLSINGLE

YODER2732B 36.0"10,000 LB. 48.0" SINGLE TBD

LITTELL2034 32.0"6,000 LB. 60.0" TBDSINGLE

SEN FUNG3140 10,000 LB. 96.0" TBDSINGLE54.0" NEW INSTOCK!

AMERICAN STEEL LINE3139 54.0"10,000 LB. 72.0" 40-12SINGLE NEW INSTOCK!

ARKU3288 30.0"6,000 LB. 96.0" DR-60-30DOUBLE NEW INSTOCK!

JAYCO3284 36.0"6,000 LB. 60.0" JDRE-6036-1DOUBLE NEW INSTOCK!

AMERICAN STEEL LINE3254 36.0"10,000 LB. 60.0" TBDSINGLE NEW INSTOCK!

SESCO3255 36.0"15,000 LB. 72.0" 55-453SINGLE NEW INSTOCK!

TISHKEN3269 24.0"15,000 LB. 60.0" 5HX-24FM-HCCSINGLE NEW INSTOCK!

DAHLSTROM2750 48.0"20,000 LB. 72.0" 20H-48-150LSINGLE PHOTOBELOW

3038 10,000 LB. 72.0" SINGLE AMERICAN STEEL LINE TBD32.0" PHOTOBELOW

RLM3103 20.0"10,000 LB. 72.0" TBDDOUBLE NEW INSTOCK!PHOTOBELOW

EGAN2253 20.0"6,000 LB. 60.0" M601-20SINGLE

ROLLRIGHT2319 16.0"5,000 LB. 72.0" TBDDOUBLE 2 INSTOCK!

AUTOMATIC FEED18.0"5,000 LB. 72.0" 102472SINGLE1856


COOPER WEYMOUTH2877 18.0"5,000 LB. 60.0" DOUBLE TBD


COOPER WEYMOUTH2212 24.0"5,000 LB. 48.0" SINGLE 5000-24M

COOPER WEYMOUTH3127 18.0"5,000 LB. 60.0" DOUBLE 5000-18DP NEW INSTOCK!

GUILD3128 12.0"6,000 LB. 60.0" UC-1518-10DOUBLE NEW INSTOCK!

LITTELL3330 12.0"6,000 LB. 60.0" 6012DOUBLE NEW INSTOCK!

COOPER WEYMOUTH3024 18.0"5,000 LB. 60.0" DOUBLE 5000-D PHOTOBELOW

HUMPHRIES2789 24.0"4,500 LB. 60.0" AR45/24/DBDOUBLE

GARY3142 30.0"4,000 LB. 60.0" SINGLE 4904 NEW INSTOCK!



MAXIMUMCOIL O.D.

STOCKNUMBER



MAXIMUMCOIL WEIGHT

MECON2988 20.0"4,000 LB. 60.0" TBDSINGLE

LITTELL1940 12.0”4,000 LB. 60.0" SINGLE 412-H7PDC40

COOPER WEYMOUTH2239 12.0"4,000 LB. 60.0" TBDSINGLE

LITTELL3132 12.0"4,000 LB. 60.0" 40-12DOUBLE NEW INSTOCK!

B&K2417A 12.0"4,000 LB. 48.0" TBDDOUBLE

WEDNESBURY1027 12.0"2,000 LB. 48.0" SINGLE TBD

LINTON & HIRTS2791 10.0"2,000 LB. 60.0" DOUBLE TBD

REGAL2576 20.0"3,000 LB. 60.0" 300012SRNPADBSINGLE

JAYBIRD2222 20.0"2,500 LB. 48.0" CR-18SINGLE


COOPER WEYMOUTH2722 18.0"2,500 LB. 48.0" 2500-18DPDOUBLE

LITTELL2961 18.0"2,500 LB. 54.0" 25-18SINGLE

ASC2989 18.0"2,500 LB. 60.0" TBDSINGLE



COOPER WEYMOUTH448C 18.0"2,500 LB. 60.0" CWP 2500SINGLE

COOPER WEYMOUTH2790 12.0"2,500 LB. 60.0" SINGLE 2500-12

TISHKEN2044 12.0"2,500 LB. 60.0" HR-10SINGLE

BHP2792 21.0"2,200 LB. 60.0" SINGLE TBD


B&K2460 12.0"2,500 LB. 48.0" SINGLE TBD

AMERICAN STEEL LINE3295 18.0"2,500 LB. 60.0" 70DOUBLE NEW INSTOCK!PHOTOBELOW

COOPER WEYMOUTH3293 18.0"2,000 LB. 60.0" TBDSINGLE NEW INSTOCK!PHOTOBELOW

YODER447F 20.0"4,000 LB. 44.0" SINGLE TBD

LITTELL2035 24.0"4,000 LB. 60.0" SINGLE 40-24

AMERICAN STEEL LINE3286 30.0"4,000 LB. 60.0" 70DOUBLE NEW INSTOCK!

REGAL2721 12.0"4,000 LB. 60.0" 4000-12-SRNP-SDBSINGLE

CUSTOM2798 17.0"2,200 LB. 48.0" CUSTOMDOUBLE


ROWE2213 20.0"4,000 LB. 60.0" SINGLE 4020-DSV

#3293 NEW IN STOCK!#3295

NEW IN STOCK! #2722


PHOTOBELOW



TISHKEN2047 8.00"1,000 LB. 48.0" MR-6SINGLE 2 INSTOCK!

LITTELL2215 12.0"600 LB. 48.0" 5SINGLE 2 INSTOCK!


AMERICAN STEEL LINE2963 16.0"1,000 LB. 48.0" 60SINGLE 2 INSTOCK!

JACO3292 12.0"1,500 LB. 60.0" TBDDOUBLE NEW INSTOCK!

COOPER WEYMOUTH3294 18.0"1,600 LB. 60.0" 2RDDOUBLE NEW INSTOCK!

CUSTOM2503B 3.00"2,000 LB. 36.0" CUSTOMDOUBLE


EGAN2234 12.0"1,000 LB. 48.0" L120-12SINGLE



MAXIMUMCOIL O.D.

STOCKNUMBER



MAXIMUMCOIL WEIGHT

DURANT TOOL2369 10.0"1,000 LB. 48.0" TBDSINGLE#3131 NEW IN STOCK!

#2490

#2726

#2489#2325

ENTRY LINE Shear WeldersFor the full specifications of these machines, visit www.utubeonline.com

STOCKNUMBER


MAXIMUMSTRIP THICKNESS

MAXIMUMSTRIP WIDTH

GUILD1211 .150" (3.81mm) 10.0" (254mm) ZA-150-10

NATIONAL2705B .156" (3.96mm)10.0" (254mm) STRIP WELDER

LEE SHAFFER2360 TBD 60.0" (1524mm) TBD

GUILD2494 .100" (2.54mm)12.0" (304mm) DMA-100-12

GUILD2425 .150" (3.81mm)12.0" (304mm) TBD

GUILD3129 TBD12.0" (304mm) ME-150-12

GUILD2491 .125" (3.17mm) 68.0" (1727mm) TBD

NEW INSTOCK!

GUILD2726 .135" (3.42mm)12.0" (304mm) TBD PHOTOBELOW

GUILD2390 .187" (4.74mm)10.0" (254mm) D-187-11

GUILD1175 TBD6.00" (152mm) S673 PE 70-6

LEE SHAFER2170 TBD3.00" (76.2mm) TBD

GUILD2490 TBDTBD ME 040-4


GUILD3131 TBD10.0" (254mm) VE-10 NEW INSTOCK!PHOTO

ON RIGHT

CUSTOM2325 TBD8.00" (203mm) TBD PHOTOBELOW

GUILD2489 TBDTBD ME 125-8 PHOTOBELOW

PHOTOON RIGHT

WANTED MACHINERYFOR IMMEDIATE PURCHASE:

Always Buying Tube, Pipe & Rollform Machinery.

Entry Line Equipment, Uncoilers, Coil Cars, Recoilers, Shear & End Welders.Rollformers, Accumulators, Flatteners, Levelers, Slitters, Cut-Off Presses, Cut-To-Length Lines.

Tube Mills, High Frequency Welders, Cut-Offs, Straighteners, Benders, End Formers, Swagers, Deburrers.

TURN YOUR SURPLUS MACHINERY INTO CASH!

Entry

Lin

e M

achi

nery


6 7

NEW IN-STOCK! 3,200 Lb. x 48" AWC Pallet-Type UncoilerAGE: 2001CAPACITY: 3,200 LBS.MAX. COIL O.D.: 48"STRIP WIDTH: 8"CONTROL: ACCRA Flex System 220V Single PHDRIVE SYSTEM: Direct Chain Driven DC Regenerative

#3299

#3334

GUILD2671 .120" (3.04mm)10.0" (254mm) DMA-5-10

KENT3334 .125" (3.17mm)10.0" (254mm) 10-135 NEW!PHOTOBELOW



TISHKEN2047 8.00"1,000 LB. 48.0" MR-6SINGLE 2 INSTOCK!

LITTELL2215 12.0"600 LB. 48.0" 5SINGLE 2 INSTOCK!


AMERICAN STEEL LINE2963 16.0"1,000 LB. 48.0" 60SINGLE 2 INSTOCK!

JACO3292 12.0"1,500 LB. 60.0" TBDDOUBLE NEW INSTOCK!

COOPER WEYMOUTH3294 18.0"1,600 LB. 60.0" 2RDDOUBLE NEW INSTOCK!

CUSTOM2503B 3.00"2,000 LB. 36.0" CUSTOMDOUBLE


EGAN2234 12.0"1,000 LB. 48.0" L120-12SINGLE



MAXIMUMCOIL O.D.

STOCKNUMBER



MAXIMUMCOIL WEIGHT

DURANT TOOL2369 10.0"1,000 LB. 48.0" TBDSINGLE#3131 NEW IN STOCK!

#2490

#2726

#2489#2325

ENTRY LINE Shear WeldersFor the full specifications of these machines, visit www.utubeonline.com

STOCKNUMBER


MAXIMUMSTRIP THICKNESS

MAXIMUMSTRIP WIDTH

GUILD1211 .150" (3.81mm) 10.0" (254mm) ZA-150-10

NATIONAL2705B .156" (3.96mm)10.0" (254mm) STRIP WELDER

LEE SHAFFER2360 TBD 60.0" (1524mm) TBD

GUILD2494 .100" (2.54mm)12.0" (304mm) DMA-100-12

GUILD2425 .150" (3.81mm)12.0" (304mm) TBD

GUILD3129 TBD12.0" (304mm) ME-150-12

GUILD2491 .125" (3.17mm) 68.0" (1727mm) TBD

NEW INSTOCK!

GUILD2726 .135" (3.42mm)12.0" (304mm) TBD PHOTOBELOW

GUILD2390 .187" (4.74mm)10.0" (254mm) D-187-11

GUILD1175 TBD6.00" (152mm) S673 PE 70-6


GUILD2490 TBDTBD ME 040-4


GUILD3131 TBD10.0" (254mm) VE-10 NEW INSTOCK!PHOTO

ON RIGHT

CUSTOM2325 TBD8.00" (203mm) TBD PHOTOBELOW

GUILD2489 TBDTBD ME 125-8 PHOTOBELOW

PHOTOON RIGHT

WANTED MACHINERYFOR IMMEDIATE PURCHASE:

Always Buying Tube, Pipe & Rollform Machinery.

Entry Line Equipment, Uncoilers, Coil Cars, Recoilers, Shear & End Welders.Rollformers, Accumulators, Flatteners, Levelers, Slitters, Cut-Off Presses, Cut-To-Length Lines.

Tube Mills, High Frequency Welders, Cut-Offs, Straighteners, Benders, End Formers, Swagers, Deburrers.

TURN YOUR SURPLUS MACHINERY INTO CASH!

Entry

Lin

e M

achi

nery


6 7

NEW IN-STOCK! 3,200 Lb. x 48" AWC Pallet-Type UncoilerAGE: 2001CAPACITY: 3,200 LBS.MAX. COIL O.D.: 48"STRIP WIDTH: 8"CONTROL: ACCRA Flex System 220V Single PHDRIVE SYSTEM: Direct Chain Driven DC Regenerative

#3299

#3334

GUILD2671 .120" (3.04mm)10.0" (254mm) DMA-5-10

KENT3334 .125" (3.17mm)10.0" (254mm) 10-135 NEW!PHOTOBELOW



8

Tube

& P

ipe

Mac

hine

ry

Tube & Pipe Machinery

9

#2942

#3004

#3281 NEW IN STOCK!

#3115 NEW IN STOCK!

#2881

HF/ERW Tube MillsFor the full specifications of these machines, visit www.utubeonline.com

STOCKNUMBER MANUFACTURER

MODELNUMBER

MINIMUMTUBE O.D.

MINIMUM WALLTHICKNESS

MAXIMUM WALLTHICKNESS

MAXIMUMTUBE O.D.

PHOTOSNEXT PG

WYMER LYDEN4.00" (114mm) .125" (3.18mm) .500" (12.7mm) 16.0" (406mm)2881 TBD PHOTOSNEXT PG

#1207

TIG Tube MillsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUMTUBE O.D.



MAXIMUMTUBE O.D.

MCKAY.875" (22.2mm) .028" (7.11mm).154" (3.91mm)3.00" (76.2mm)1212 TBD

ARDCOR0.75" (19.1mm) .034" (.863mm).134" (3.40mm)1.50" (38.1mm)1188 U-10

CUSTOM.313" (7.95mm) TBDTBD0.75" (19.1mm)2819 TBD

MCKAY.875" (22.2mm) .028" (7.11mm).154" (3.91mm)3.00" (76.2mm)1207 TBD PHOTOSBELOW

LIVERNOIS.500" (12.7mm) .009" (.228mm).043" (1.09mm)1.00" (25.4mm)352 TBD

ABBEY ETNA 2X - 2K.640" (16.3mm)2839 TBD TBD TBD

MCKAY TBD.500" (12.7mm) TBDTBD2.00" (50.8mm)3039

MCKAY1.50" (38.1mm) .500" (12.7mm) .050" (1.27mm) .020" (.508mm) TBD1728

TUREK & HELLER W200-9.500" (12.7mm) .020" (.508mm).110" (2.79mm)2.00" (50.8mm)537

DONG WOO.500" (12.7mm) .018" (.457mm) .074" (1.87mm)2.00" (50.8mm)740 TBD

BRITISH ARM.500" (12.7mm) .027" (.685mm).070" (1.77mm)1.50" (38.1mm) 2544 TBD

CAPRIA M2.095" (2.41mm)2.50" (63.5mm)687 TBD TBD

.020" (.508mm) TMC / YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3192 M2 NEW INSTOCK!

YODER M2.500" (12.7mm) .020" (.508mm).095" (2.41mm)2.50" (63.5mm) 2878

.020" (.508mm) YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3194 M2 NEW INSTOCK!

.028" (.711mm) YODER.125" (3.17mm) 2.50" (63.5mm) .500" (12.7mm) 3281 W20 NEW INSTOCK!

PHOTOSBELOW

.020" (.508mm) YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3004 M2 PHOTOSBELOW

MCKAY.125" (3.17mm)2.50" (63.5mm) .500" (12.7mm) .035" (.889 mm)2942 TBD PHOTOSBELOW

URRUTIA3.00" (76.2mm)686 .135" (3.43mm) 2-1/2TBD TBD

YODER W15.040" (1.01mm).500" (12.7mm)1166 TBD .028" (.711mm)

YODER.500" (12.7mm) TBD.030" (7.63mm).375" (9.50mm)2693 Y-LINE

ABBEY ETNA 2K.125" (3.17mm)3.00" (76.2mm)3281 .500" (12.7mm) .018" (.457mm)

.032" (.812mm) SFM 761.00" (25.4mm) .166" (4.21mm)3.00" (76.2mm)3115 NEW!

.028" (.711mm) SFM 63.500" (12.7mm) .119" (3.02mm)2.50" (63.5mm)3180 NEW!

.032" (.812mm) SFM 63.867" (22.0mm) .099" (2.51mm)2.50" (63.5mm)2930 NEW!

NEW!TBD NANJIN, BAODING 190-62.30" (5.84mm) .240" (6.09mm)7.50" (190mm)2747PHOTOSNEXT PG



8

Tube

& P

ipe

Mac

hine

ry


9

#2942

#3004

#3281 NEW IN STOCK!

#3115 NEW IN STOCK!

#2881

HF/ERW Tube MillsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUMTUBE O.D.



MAXIMUMTUBE O.D.

PHOTOSNEXT PG

WYMER LYDEN4.00" (114mm) .125" (3.18mm) .500" (12.7mm) 16.0" (406mm)2881 TBD PHOTOSNEXT PG

#1207

TIG Tube MillsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUMTUBE O.D.



MAXIMUMTUBE O.D.

MCKAY.875" (22.2mm) .028" (7.11mm).154" (3.91mm)3.00" (76.2mm)1212 TBD

ARDCOR0.75" (19.1mm) .034" (.863mm).134" (3.40mm)1.50" (38.1mm)1188 U-10

CUSTOM.313" (7.95mm) TBDTBD0.75" (19.1mm)2819 TBD

MCKAY.875" (22.2mm) .028" (7.11mm).154" (3.91mm)3.00" (76.2mm)1207 TBD PHOTOSBELOW

LIVERNOIS.500" (12.7mm) .009" (.228mm).043" (1.09mm)1.00" (25.4mm)352 TBD

ABBEY ETNA 2X - 2K.640" (16.3mm)2839 TBD TBD TBD

MCKAY TBD.500" (12.7mm) TBDTBD2.00" (50.8mm)3039

MCKAY1.50" (38.1mm) .500" (12.7mm) .050" (1.27mm) .020" (.508mm) TBD1728

TUREK & HELLER W200-9.500" (12.7mm) .020" (.508mm).110" (2.79mm)2.00" (50.8mm)537

DONG WOO.500" (12.7mm) .018" (.457mm) .074" (1.87mm)2.00" (50.8mm)740 TBD

BRITISH ARM.500" (12.7mm) .027" (.685mm).070" (1.77mm)1.50" (38.1mm) 2544 TBD

CAPRIA M2.095" (2.41mm)2.50" (63.5mm)687 TBD TBD

.020" (.508mm) TMC / YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3192 M2 NEW INSTOCK!

YODER M2.500" (12.7mm) .020" (.508mm).095" (2.41mm)2.50" (63.5mm) 2878

.020" (.508mm) YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3194 M2 NEW INSTOCK!

.028" (.711mm) YODER.125" (3.17mm) 2.50" (63.5mm) .500" (12.7mm) 3281 W20 NEW INSTOCK!

PHOTOSBELOW

.020" (.508mm) YODER.095" (2.41mm) 2.50" (63.5mm) .500" (12.7mm) 3004 M2 PHOTOSBELOW

MCKAY.125" (3.17mm)2.50" (63.5mm) .500" (12.7mm) .035" (.889 mm)2942 TBD PHOTOSBELOW

URRUTIA3.00" (76.2mm)686 .135" (3.43mm) 2-1/2TBD TBD

YODER W15.040" (1.01mm).500" (12.7mm)1166 TBD .028" (.711mm)

YODER.500" (12.7mm) TBD.030" (7.63mm).375" (9.50mm)2693 Y-LINE

ABBEY ETNA 2K.125" (3.17mm)3.00" (76.2mm)3281 .500" (12.7mm) .018" (.457mm)

.032" (.812mm) SFM 761.00" (25.4mm) .166" (4.21mm)3.00" (76.2mm)3115 NEW!

.028" (.711mm) SFM 63.500" (12.7mm) .119" (3.02mm)2.50" (63.5mm)3180 NEW!

.032" (.812mm) SFM 63.867" (22.0mm) .099" (2.51mm)2.50" (63.5mm)2930 NEW!

NEW!TBD NANJIN, BAODING 190-62.30" (5.84mm) .240" (6.09mm)7.50" (190mm)2747PHOTOSNEXT PG

UCG Drive System CONEDRIVE Gearboxes

FOR TUBE MILLS & ROLLFORMERS. CONTACT US WITH YOUR SPECIFIC REQUIREMENTS.

NEW COMPONENTS& ACCESSORIES





10 11

Tube

& P

ipe

Mac

hine

ry


245mm API Complete Pipe Plant For SaleFor Producing Casing Pipe and API X60API Certified: API 5CT, API 5L, API Q1, ISO9001, ISO/TS29001. Produced Pipe for the U.S. Oil and Gas Industries. Plant consists of 2 production lines used to supply an average of 160,000 metric tons of ERW Pipe Mill pipe per year.

#2926 NEVER USED! #2175

TUBE Preheat /AnnealFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBERMAIN SUPPLY

INVERTERSUPPLY KVAKW RATING

TERMOMACCHINE480 V 100 KVA100 KW2570 70.075.1071

WESTINGHOUSE MFO2174 200 KW TBD TBD

NEVER USED!

TAYLOR WINFIELD ROL200 KW2175 TBD TBD PHOTOBELOW

THERMATOOL VIP 500 1555 KVA500 KW2926 460 V PHOTOBELOW

TUBE High Frequency WeldersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBERTYPEPHASE

PRIMARYAMPS

OUTPUTPOWER

INPUTPOWER

THERMATOOLH.F. TC 1003 132591 100 KW 460 V

INDUCTRON 1003033 100 KW 460 V 3 240 TBD NEW INSTOCK!

INDUCTRON 1503195 150 KW 380/600 V 3 TBD H.F. NEW INSTOCK!

THERMATOOL TI 200H.F. INDUCTION2854 200 KW 460 V 3 525

H.F. INDUCTION THERMATOOL TI 2002855 200 KW 460/30/60 HZ 3 525

INDUCTROWELD2913 225 KW 400 KHZ TBD TBD3 575

ELVA G1TBD2975 225 KW TBD TBD TBD PARTS

INDUCTROGUILD 2003032 200 KW 460 V TBD TBD TBD NEW INSTOCK!

150 KW - 800 KWNEW!NEW!HIGH FREQUENCY, SOLID STATE

NEW!

UCG Drive System CONEDRIVE Gearboxes

FOR TUBE MILLS & ROLLFORMERS. CONTACT US WITH YOUR SPECIFIC REQUIREMENTS.






10 11

Tube

& P

ipe

Mac

hine

ry


245mm API Complete Pipe Plant For SaleFor Producing Casing Pipe and API X60API Certified: API 5CT, API 5L, API Q1, ISO9001, ISO/TS29001. Produced Pipe for the U.S. Oil and Gas Industries. Plant consists of 2 production lines used to supply an average of 160,000 metric tons of ERW Pipe Mill pipe per year.

#2926 NEVER USED! #2175

TUBE Preheat /AnnealFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBERMAIN SUPPLY

INVERTERSUPPLY KVAKW RATING

TERMOMACCHINE480 V 100 KVA100 KW2570 70.075.1071

WESTINGHOUSE MFO2174 200 KW TBD TBD

NEVER USED!

TAYLOR WINFIELD ROL200 KW2175 TBD TBD PHOTOBELOW

THERMATOOL VIP 500 1555 KVA500 KW2926 460 V PHOTOBELOW

TUBE High Frequency WeldersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBERTYPEPHASE

PRIMARYAMPS

OUTPUTPOWER

INPUTPOWER

THERMATOOLH.F. TC 1003 132591 100 KW 460 V

INDUCTRON 1003033 100 KW 460 V 3 240 TBD NEW INSTOCK!

INDUCTRON 1503195 150 KW 380/600 V 3 TBD H.F. NEW INSTOCK!

THERMATOOL TI 200H.F. INDUCTION2854 200 KW 460 V 3 525

H.F. INDUCTION THERMATOOL TI 2002855 200 KW 460/30/60 HZ 3 525

INDUCTROWELD2913 225 KW 400 KHZ TBD TBD3 575

ELVA G1TBD2975 225 KW TBD TBD TBD PARTS

INDUCTROGUILD 2003032 200 KW 460 V TBD TBD TBD NEW INSTOCK!

150 KW - 800 KWNEW!NEW!HIGH FREQUENCY, SOLID STATE

NEW!



Tube

& P

ipe

Mac

hine

ry

12


13

14” KUSAKABE MillingCutter Head, Stock #3034

#2577

#3196 NEW IN STOCK!

ALPHA 15310.083" (2.10mm) NR1.50" (38.1mm)1896A NR

YODER P-25.050" (1.27mm) 751.25" (31.7mm)2375 150 FPM 2 INSTOCK!

ALPHA 35-19-5TBD NR2.00" (50.8mm)1896B NR

B&K TBD.080 (2.03mm) NR2.00" (50.8mm)1462 NR

TUBE & PIPE Cut-OffsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER


MAXIMUM CUTSPER MINUTE

MAXIMUMTUBE O.D.

MAXIMUMSPEED

ALPHA.187" (4.70mm) 30 IR-20-3-565.00" (127mm)1553 200 FPM

ALPHA 50-187-120.250" (6.35mm) 155.00" (127mm)2730 NR

TUREK & HELLERNR NR6.00" (152mm)1445 NR NR

ABBEY ETNANR NR6.00" (152mm)3025 NR NR

REPUBLIC2.80" (7.00mm) NR5.00" (127mm)1578 NR NR

ALPHA FR-16 2-300.125" (3.18mm) 354.00" (101mm)2577 300 FPM PHOTOSBELOW

YODER P-55.134" (3.40mm) 75300 FPM3.00" (76.2mm)2804

ROBONEX ART-1600.125" (3.18mm) NR3.00" (76.2mm) NR544

BETARAM.125" (3.18mm) 70 OA-3-FD2.00" (50.1mm)2310 100 FPM

ALPHA CSR-2005-41.125" (3.18mm) NR2.00" (50.8mm)2853 500 FPM

ALPHA UD-25-135-300.135" (3.40mm) 502.50" (63.0mm)2371 NR

ALPHA SR-10-2-56.085" (2.15mm) NR2.125" (53.9mm)3006 NR

BETARAM OA-2.5-FD.100" (2.54mm) NR1.50" (38.0mm)2544B 300 FPM

BERTOLETTE TBD.049" (1.24mm) NR1.00" (25.4mm)2192B 30 FPM

BETARAM W2.0FD.500" (12.7mm) TBDTBD2.00" (50.8mm)3196 NEW INSTOCK!PHOTOSBELOW

ALPHA SR12-30/45.134 (3.40mm) 503.00" (76.2mm)1920 300 FPM

LFJ76.075" (1.91mm)3.00" (76.2mm)2849 NR CUSTOM98 FPM NEW!

NR.075" (1.91mm)3.00" (76.2mm)3122 NR SRET328 FPM NEW!

#3341 NEW IN STOCK!

#3171 NEW IN STOCK!

ETNA 5HCO1.00" (25.4mm)5.00" (127mm)2847 0.50" (12.7mm)

BARDONS & OLIVER 34-1/2TBD4.50" (114mm)1581 TBD

HAVEN 7401.00" (25.4mm)4.00" (101mm)3301 .320" (8.12mm) NEW INSTOCK!

BARDONS & OLIVER 34TBD4.00" (101mm)2182 TBD

ADIGE TS70.375" (9.52mm)3.25" (82.5mm)1914 TBD

MODERN 3-L0.25" (6.35mm)3.125" (3.175mm)2763 1.50" (38.1mm)

PINES 300.50" (12.7mm)3.00" (76.2mm)1828 1.00" (25.4mm)

BERTOLETTE 3200.50" (12.7mm)3.00" (76.2mm)2399 .065" (1.65mm)

2 INSTOCK!

TUBE & PIPE Re-CutsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUMTUBE O.D.

MAXIMUMTUBE O.D.

---


MODERN 6L0.75" (19.0mm)7.00" (177mm)3110 1.50" (38.1mm) NEW INSTOCK!

MODERN 6KD0.75" (19.0mm)7.00" (177mm)2422 1.50" (38.1mm)

OMP SANTORSO (VI) ITALY 6370A/P-PTBD5.0625" (128mm)2143 TBD

OMP SANTORSO (VI) ITALY 6370A/PPLTBD5.0625" (128mm)2144 TBD

HAVEN 8751.00" (25.4mm)5.00" (127mm)3341 .165” (4.19mm) NEW INSTOCK!PHOTOSABOVE

BARDONS & OLIVER 2B0.25" (6.35mm)2.125" (53.9mm)1185 TBD

HAVEN 8730.50" (12.7mm)3.00" (76.2mm)3300 .125" (3.17mm) NEW INSTOCK!


6 INSTOCK!

PHOTOSABOVE

HAVEN 871.187” (25.4mm)1.50" (38.1mm)2667 .094” (2.38mm)

PINES 15.125" (3.17mm)1.50" (38.1mm)2631 .065" (1.65mm) 6 INSTOCK!

HAVEN 802.125” (3.17mm).375" (9.52mm)1419 .049” (1.24mm) 2 INSTOCK!

#2667

PHOTOSABOVE



Tube

& P

ipe

Mac

hine

ry

12


13

14” KUSAKABE MillingCutter Head, Stock #3034

#2577

#3196 NEW IN STOCK!

ALPHA 15310.083" (2.10mm) NR1.50" (38.1mm)1896A NR

YODER P-25.050" (1.27mm) 751.25" (31.7mm)2375 150 FPM 2 INSTOCK!

ALPHA 35-19-5TBD NR2.00" (50.8mm)1896B NR

B&K TBD.080 (2.03mm) NR2.00" (50.8mm)1462 NR

TUBE & PIPE Cut-OffsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER


MAXIMUM CUTSPER MINUTE

MAXIMUMTUBE O.D.

MAXIMUMSPEED

ALPHA.187" (4.70mm) 30 IR-20-3-565.00" (127mm)1553 200 FPM

ALPHA 50-187-120.250" (6.35mm) 155.00" (127mm)2730 NR

TUREK & HELLERNR NR6.00" (152mm)1445 NR NR

ABBEY ETNANR NR6.00" (152mm)3025 NR NR

REPUBLIC2.80" (7.00mm) NR5.00" (127mm)1578 NR NR

ALPHA FR-16 2-300.125" (3.18mm) 354.00" (101mm)2577 300 FPM PHOTOSBELOW

YODER P-55.134" (3.40mm) 75300 FPM3.00" (76.2mm)2804

ROBONEX ART-1600.125" (3.18mm) NR3.00" (76.2mm) NR544

BETARAM.125" (3.18mm) 70 OA-3-FD2.00" (50.1mm)2310 100 FPM

ALPHA CSR-2005-41.125" (3.18mm) NR2.00" (50.8mm)2853 500 FPM

ALPHA UD-25-135-300.135" (3.40mm) 502.50" (63.0mm)2371 NR

ALPHA SR-10-2-56.085" (2.15mm) NR2.125" (53.9mm)3006 NR

BETARAM OA-2.5-FD.100" (2.54mm) NR1.50" (38.0mm)2544B 300 FPM

BERTOLETTE TBD.049" (1.24mm) NR1.00" (25.4mm)2192B 30 FPM

BETARAM W2.0FD.500" (12.7mm) TBDTBD2.00" (50.8mm)3196 NEW INSTOCK!PHOTOSBELOW

ALPHA SR12-30/45.134 (3.40mm) 503.00" (76.2mm)1920 300 FPM

LFJ76.075" (1.91mm)3.00" (76.2mm)2849 NR CUSTOM98 FPM NEW!

NR.075" (1.91mm)3.00" (76.2mm)3122 NR SRET328 FPM NEW!

#3341 NEW IN STOCK!

#3171 NEW IN STOCK!

ETNA 5HCO1.00" (25.4mm)5.00" (127mm)2847 0.50" (12.7mm)

BARDONS & OLIVER 34-1/2TBD4.50" (114mm)1581 TBD

HAVEN 7401.00" (25.4mm)4.00" (101mm)3301 .320" (8.12mm) NEW INSTOCK!

BARDONS & OLIVER 34TBD4.00" (101mm)2182 TBD

ADIGE TS70.375" (9.52mm)3.25" (82.5mm)1914 TBD

MODERN 3-L0.25" (6.35mm)3.125" (3.175mm)2763 1.50" (38.1mm)

PINES 300.50" (12.7mm)3.00" (76.2mm)1828 1.00" (25.4mm)

BERTOLETTE 3200.50" (12.7mm)3.00" (76.2mm)2399 .065" (1.65mm)

2 INSTOCK!

TUBE & PIPE Re-CutsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUMTUBE O.D.

MAXIMUMTUBE O.D.

---


MODERN 6L0.75" (19.0mm)7.00" (177mm)3110 1.50" (38.1mm) NEW INSTOCK!

MODERN 6KD0.75" (19.0mm)7.00" (177mm)2422 1.50" (38.1mm)

OMP SANTORSO (VI) ITALY 6370A/P-PTBD5.0625" (128mm)2143 TBD

OMP SANTORSO (VI) ITALY 6370A/PPLTBD5.0625" (128mm)2144 TBD

HAVEN 8751.00" (25.4mm)5.00" (127mm)3341 .165” (4.19mm) NEW INSTOCK!PHOTOSABOVE

BARDONS & OLIVER 2B0.25" (6.35mm)2.125" (53.9mm)1185 TBD



6 INSTOCK!

PHOTOSABOVE

HAVEN 871.187” (25.4mm)1.50" (38.1mm)2667 .094” (2.38mm)

PINES 15.125" (3.17mm)1.50" (38.1mm)2631 .065" (1.65mm) 6 INSTOCK!

HAVEN 802.125” (3.17mm).375" (9.52mm)1419 .049” (1.24mm) 2 INSTOCK!

#2667

PHOTOSABOVE

Motors are sized according to die set weight, travel distance and mill speed required.Ball Screw die accelerators can be fitted for new presses or retrofitted to existing presses.

™

Exact specifications vary depending on the specific application

U-TRAK ADVANTAGESU-TRAK ADVANTAGESTM

Increased Line SpeedsGreater Accuracy with Reduced ScrapLonger Blade Life

Touch Screen Operator Interface for Ease of Set-UpMultiple Batch Control with On-The-Fly Changes Blade Width Compensation

MAXIMUM LINE SPEEDSMAXIMUM LINE SPEEDSU-TRAK TW™ - 130 FPM

U-TRAK 1™ - 175 FPMU-TRAK 2™ - 200 FPMU-TRAK B™ - 600 FPM

U-TRAK HD™ - 135 FPMU-TRAK R™ - Controls your existing hydraulic

accelorator with Hi-Speed electronics forgreater accuracy and reliability.

Closed Loop cut cycle is standard for all U-TRAKS™. The Closed-loop system uses a controller to automatically synchronize the speed of the die set with the tube or rollformed part. All operations of the die accelerator and press interlocks are controlled by a single control console. Optional encoder mounting with upper and lower roll floating adjustment.

Minimize Cost and Maintain Quality.

LENGTH CONTROL SYSTEMLENGTH CONTROL SYSTEMLENGTH CONTROL SYSTEMFOR FLYING CUT-OFFSLENGTH CONTROL SYSTEMFOR FLYING CUT-OFFS



Tube

& P

ipe

Mac

hine

ry

14


15

+1 419-872-2364 | 26202 Glenwood Rd. Perrysburg Ohio 43551www.universalcontrolsgroup.com | [email protected]

#2519#3244 & #3245 NEW IN STOCK!

TUBE & PIPE StraightenersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUM TUBEDIAMETER


MAXIMUMTUBE O.D.

SUTTON 2-251.00" (25.4mm) .500" (12.7mm)6.00" (152mm)474

BIGWOOD.750" (19.1mm)3.00" (76.2mm)2519 1BNR

TAIYUAN HUAYE JZ 0893.50" (76.2mm)3245 .500" (12.7mm) .158" (4.00mm) NEW INSTOCK!


BIGWOOD 32471.00" (25.4mm)1089 .375" (9.53mm) NR

TUREK & HELLER TBDTBD3220 TBD TBD 2 NEWIN STOCK!

MACKINTOSH HEMPHILL AY-HD.500" (12.7mm)2894 .125" (3.18mm) NR 3 INSTOCK!

MACKINTOSH HEMPHILL AXY8.125" (206mm)3322 0.25” (6.35mm) TBD NEW INSTOCK!

#3220 NEW IN STOCK! #3221

NEW IN STOCK!#3322

NEW IN STOCK!

PHOTOBELOWPHOTOBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

TUBE & PIPE BendersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER


MAXIMUMTUBE O.D. HYDRAULIC POWER

PINES1284 .065" (1.65mm)2.25" (57.1mm) 25T25 Ton

PINES2655 .083" (2.10mm)2.00" (50.8mm) 20T20 Ton 7 INSTOCK!

PINES515 .093" (2.36mm)1.50" (38.1mm) 3/4N/R 3 INSTOCK!


PINES 11.50" (38.1mm)3340 TBD TBD NEW INSTOCK!

Motors are sized according to die set weight, travel distance and mill speed required.Ball Screw die accelerators can be fitted for new presses or retrofitted to existing presses.

™

Exact specifications vary depending on the specific application

U-TRAK ADVANTAGESU-TRAK ADVANTAGESTM

Increased Line SpeedsGreater Accuracy with Reduced ScrapLonger Blade Life

Touch Screen Operator Interface for Ease of Set-UpMultiple Batch Control with On-The-Fly Changes Blade Width Compensation

MAXIMUM LINE SPEEDSMAXIMUM LINE SPEEDSU-TRAK TW™ - 130 FPM

U-TRAK 1™ - 175 FPMU-TRAK 2™ - 200 FPMU-TRAK B™ - 600 FPM

U-TRAK HD™ - 135 FPMU-TRAK R™ - Controls your existing hydraulic

accelorator with Hi-Speed electronics forgreater accuracy and reliability.

Closed Loop cut cycle is standard for all U-TRAKS™. The Closed-loop system uses a controller to automatically synchronize the speed of the die set with the tube or rollformed part. All operations of the die accelerator and press interlocks are controlled by a single control console. Optional encoder mounting with upper and lower roll floating adjustment.

Minimize Cost and Maintain Quality.

LENGTH CONTROL SYSTEMLENGTH CONTROL SYSTEMLENGTH CONTROL SYSTEMFOR FLYING CUT-OFFSLENGTH CONTROL SYSTEMFOR FLYING CUT-OFFS



Tube

& P

ipe

Mac

hine

ry

14


15

+1 419-872-2364 | 26202 Glenwood Rd. Perrysburg Ohio 43551www.universalcontrolsgroup.com | [email protected]

#2519#3244 & #3245 NEW IN STOCK!

TUBE & PIPE StraightenersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MINIMUM TUBEDIAMETER


MAXIMUMTUBE O.D.

SUTTON 2-251.00" (25.4mm) .500" (12.7mm)6.00" (152mm)474

BIGWOOD.750" (19.1mm)3.00" (76.2mm)2519 1BNR



BIGWOOD 32471.00" (25.4mm)1089 .375" (9.53mm) NR

TUREK & HELLER TBDTBD3220 TBD TBD 2 NEWIN STOCK!

MACKINTOSH HEMPHILL AY-HD.500" (12.7mm)2894 .125" (3.18mm) NR 3 INSTOCK!

MACKINTOSH HEMPHILL AXY8.125" (206mm)3322 0.25” (6.35mm) TBD NEW INSTOCK!

#3220 NEW IN STOCK! #3221

NEW IN STOCK!#3322

NEW IN STOCK!


PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

TUBE & PIPE BendersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER


MAXIMUMTUBE O.D. HYDRAULIC POWER

PINES1284 .065" (1.65mm)2.25" (57.1mm) 25T25 Ton


PINES515 .093" (2.36mm)1.50" (38.1mm) 3/4N/R 3 INSTOCK!


PINES 11.50" (38.1mm)3340 TBD TBD NEW INSTOCK!



Tube

& P

ipe

Mac

hine

ry


16 17

TUBE & PIPE DeburrersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MIN/MAX TUBELENGTH

MIN/MAX BARDIAMETER

MIN/MAX TUBEDIAMETER

ADIGE2301 6.00" - 120" (150 - 3048mm) ST660.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)

BURRMASTER2291 6.00" - 180" (150 - 4572mm) 1.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)

BURRMASTER1831 6.00" - 72.0" (150 - 1828mm) 1.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)


BURRMASTER2324 1.00" - 24.0" (25.4 - 609mm) 8.375" - 2.50" (9.52 - 63.5mm) .375" - 2.40" (9.52 - 60.9mm)

CUSTOM2059 6.00" - 120" (150 - 3048mm) .375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm) TBD

ADIGE3015 6.00" - 144" (150 - 3657mm) ST660.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)

BURRMASTER1830 6.00" - 168" (150 - 4267mm) 1.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm) 2 INSTOCK!


#1969

2661 STEVENS& BULLIVANT4.50" (114mm) 4.00" x 3.50" x 6.00"

(101mm x 88.9mm x 152mm) 15CSTBD

TUBE & PIPE SwagersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUM TUBEDIAMETER

ROLLDIAMETER

DIE WIDTH x HEIGHT x LENGTH

VISIT US AT UPCOMINGTRADE SHOWS!

join the bestDusseldorf, Germany

North America's Largest Metal Forming, Fabricating, Welding and Finishing Event

TUBE & PIPE End FormersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUMTUBE O.D.

MAXIMUM LENGTHTHAT CAN BE SIZED

MINIMUM TUBETUBE DIAMETER

VAILL1789 0.75" (19.0mm) .125" (3.18mm) 60TBD

VAILL 7-30T1804 .500" (12.7mm) 3.00" (76.2mm) TBD

DICKEY & SONS3.50" (88.9mm)1811 .750" (19.0mm) 3-1/2TBD

FENN3.00" (76.2mm)1737 TBDTBD TBD

DICKEY15.0" (381mm)3.00" (76.2mm)2594 TBD TBD

CUSTOM2150 2.00" (50.8mm) TBD TBDTBD

CUSTOM2108 1.00" (25.4mm) TBD TBD102" (2590mm)

RESENER I/O4.00" (101mm)3.00" (76.2mm)1808 1.25" (31.8mm) 7 INSTOCK!

FENN1736 2.50" (63.5mm) TBD 20TBD 3 INSTOCK!

EAGLE I/O2.75" (70.0mm)2644 1.00" (25.4mm) TBD 4 INSTOCK!PHOTOSBELOW

#2644 4 IN STOCK!

1966 2.25" (31.7mm) 3.12" x 2.25" x 7.50"(79.2mm x 57.1mm x 190mm) TBD 4-1/2FENN

ABBEY ETNA503 1.00" (25.4mm) 1.87" x 1.12" x 3.00"(47.4mm x 28.4mm x 76.2mm) 1.56" (39.6mm) 103

1.19" x 0.88" x 2.00"(30.2mm x 22.3mm x 50.8mm) CUSTOM2796 .375" (9.52mm) 1.00" (25.4mm) TBD

506 TORRINGTON1.25" (31.7mm) 1.50" x 1.81" x 3.50"(38.1mm x 45.9mm x 88.9mm) 1.50" (38.1mm) 323SS 2 IN

STOCK!

2084 1.75" (44.4mm) 2.00" x 2.06" x 4.62"(50.8mm x 52.3mm x 117mm) CUSTOMTBD TBD 2 IN

STOCK!

1969 FENN2.25" (57.1mm) 3.12" x 2.25" x 7.50"(79.3mm x 57.1mm x 190mm) 1.50" (38.1mm) 4-1/2 PHOTOS

BELOW

KENT2419 12.0" - 24.0" (304 - 609mm) 1.500" - 4.00" (12.7 - 101mm) .375" - 2.40" (9.52 - 60.9mm)



Tube

& P

ipe

Mac

hine

ry


16 17

TUBE & PIPE DeburrersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MIN/MAX TUBELENGTH

MIN/MAX BARDIAMETER

MIN/MAX TUBEDIAMETER

ADIGE2301 6.00" - 120" (150 - 3048mm) ST660.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)

BURRMASTER2291 6.00" - 180" (150 - 4572mm) 1.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)



BURRMASTER2324 1.00" - 24.0" (25.4 - 609mm) 8.375" - 2.50" (9.52 - 63.5mm) .375" - 2.40" (9.52 - 60.9mm)

CUSTOM2059 6.00" - 120" (150 - 3048mm) .375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm) TBD

ADIGE3015 6.00" - 144" (150 - 3657mm) ST660.375" - 3.00" (9.52 - 76.0mm) .375" - 2.40" (9.52 - 60.9mm)



#1969

2661 STEVENS& BULLIVANT4.50" (114mm) 4.00" x 3.50" x 6.00"

(101mm x 88.9mm x 152mm) 15CSTBD

TUBE & PIPE SwagersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUM TUBEDIAMETER

ROLLDIAMETER

DIE WIDTH x HEIGHT x LENGTH

VISIT US AT UPCOMINGTRADE SHOWS!

join the bestDusseldorf, Germany

North America's Largest Metal Forming, Fabricating, Welding and Finishing Event

TUBE & PIPE End FormersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUMTUBE O.D.

MAXIMUM LENGTHTHAT CAN BE SIZED

MINIMUM TUBETUBE DIAMETER

VAILL1789 0.75" (19.0mm) .125" (3.18mm) 60TBD

VAILL 7-30T1804 .500" (12.7mm) 3.00" (76.2mm) TBD

DICKEY & SONS3.50" (88.9mm)1811 .750" (19.0mm) 3-1/2TBD

FENN3.00" (76.2mm)1737 TBDTBD TBD

DICKEY15.0" (381mm)3.00" (76.2mm)2594 TBD TBD

CUSTOM2150 2.00" (50.8mm) TBD TBDTBD

CUSTOM2108 1.00" (25.4mm) TBD TBD102" (2590mm)

RESENER I/O4.00" (101mm)3.00" (76.2mm)1808 1.25" (31.8mm) 7 INSTOCK!

FENN1736 2.50" (63.5mm) TBD 20TBD 3 INSTOCK!

EAGLE I/O2.75" (70.0mm)2644 1.00" (25.4mm) TBD 4 INSTOCK!PHOTOSBELOW

#2644 4 IN STOCK!

1966 2.25" (31.7mm) 3.12" x 2.25" x 7.50"(79.2mm x 57.1mm x 190mm) TBD 4-1/2FENN

ABBEY ETNA503 1.00" (25.4mm) 1.87" x 1.12" x 3.00"(47.4mm x 28.4mm x 76.2mm) 1.56" (39.6mm) 103

1.19" x 0.88" x 2.00"(30.2mm x 22.3mm x 50.8mm) CUSTOM2796 .375" (9.52mm) 1.00" (25.4mm) TBD

506 TORRINGTON1.25" (31.7mm) 1.50" x 1.81" x 3.50"(38.1mm x 45.9mm x 88.9mm) 1.50" (38.1mm) 323SS 2 IN

STOCK!

2084 1.75" (44.4mm) 2.00" x 2.06" x 4.62"(50.8mm x 52.3mm x 117mm) CUSTOMTBD TBD 2 IN

STOCK!

1969 FENN2.25" (57.1mm) 3.12" x 2.25" x 7.50"(79.3mm x 57.1mm x 190mm) 1.50" (38.1mm) 4-1/2 PHOTOS

BELOW

KENT2419 12.0" - 24.0" (304 - 609mm) 1.500" - 4.00" (12.7 - 101mm) .375" - 2.40" (9.52 - 60.9mm)



Shee

t & S

trip

Mac

hine

ry

Sheet & Strip Machinery

18 19

SHEET & STRIP Cut-OffsFor the full specifications of these machines, visit www.utubeonline.com

2 INSTOCK!

#2459

STOCKNUMBER

MODELNUMBER

MAXIMUMSTROKE MANUFACTURER

DISTANCEBETWEEN POSTS

POSTS /DIAMETERCAPACITY

SHEET & STRIP Cut-Offs continuedFor the full specifications of these machines, visit www.utubeonline.com

2.00" TISHKEN1395 12 Ton 2 / TBDTBD TBD

CO-6-HWA2.00" TISHKEN1948 9.00" 2 / 1.75"18 Ton

4P-123.00" PNEU POWER2433 8.50" L-R / 14.0" F-B 4 / 2.00"12 Ton


CO4-HA2.00" TISHKEN1885 8.00" 2 / 1.50"12 Ton

CO4-HW2.00" TISHKEN504 7.00" 2 / 1.50"12 Ton

4-P-123.00" PNEU POWER2333 12 Ton 4 / TBDTBD

TBDTBD PNEU POWER1988 15 Ton 4 / 2.00"16.5" L-R / 16.5" F-B

TBD1.50" PNEU POWER2346 15 Ton 4 / 2.00"24.5" L-R / 24.5" F-B

ACO-152.00" TISHKEN1998 15 Ton 4 / 1.75"12.0"

CO-6-8-182.00" TISHKEN2530 9.00" 4 / 1.75"18 Ton

CO-6-HA2.00" TISHKEN1946 8.00" 2 / 1.75"18 Ton

ATP-1243.00" AIR RAM2538 15.0" L-R / 10.0" F-B 4 / 1.50"16 Ton

CO-6-HW2.00" TISHKEN1945 8.00" 2 / 1.75"18 Ton


3.00" CONTOUR2892 8.50" L-R12 Ton 4 / 1.50" TBD

CO4-HWA2.00" TISHKEN2503A TBD 2 / 1.50"12 Ton

MCO 1177-72.00" METFORM2619 4 / TBDTBD10 Ton

#1854#1549 #2436

STOCKNUMBER

MODELNUMBER




CO-12-24-80TISHKEN1854 16.0" L-R / 19.0" F-B 4 / 2.50"80 Ton 2.50"

ASC1549 117" L-R / 29.0" F-B 4 / 4.00"80 Ton 2.00" TBD

TISHKEN3339 27.5" L-R / 27.5" F-B 4 / 3.50"140 Ton CO-18-4-304.00" NEW INSTOCK!

PHOTOBELOW

C0-10-4HA1TISHKEN1944 16.0" 4 / 3.00"2.50"25 Ton

KANE & ROACH2712 10.0" L-R / 18.0" F-B 4 / 2.50"4.00"25 Ton TBD

SAMCO2186 10.5" L-R / 15.0" F-B 4 / 2.00".500"25 Ton TBD

PNEU POWER1753A 20.0" L-R / 14.0" F-B 4 / 2.00"25 Ton TBDTBD

C0-12-4HA10TISHKEN2531 6.00" L-R / 17.0" F-B 4 / 2.00"2.50"25 Ton

PNEU POWER16.0" 3.00"30 Ton486 TBD TBD

P-30YODER2007 18.0" L-R / 14.0" F-B 4 / 2.00"3.00"30 Ton

P-40YODER2463 19.0" L-R / 15.0" F-B 4 / 2.25"2.00"40 Ton

P-40YODER2434 19.0" L-R / 15.0" F-B 4.00"40 Ton 4 / 2.25"

TBDPM MACHINE2993 30.0" L-R / 19.0" F-B 3.00"30 Ton (est.) 4 / 3.00"

BRADBURY2876 12.0" L-R / 64.0" F-B 4 / 3.00"3.00"35 Ton TBD

4CT36B & K2732F 12.0" L-R / 30.0" F-B 4 / TBD4.00"36 Ton

35TALPHA1886 19.0" L-R / 9.50" F-B 4 / 2.25"3.00"35 Ton

YODER3260 14.0" L-R / 18.0" F-B 4 / 2.00"30 Ton P-30S4.00" NEW INSTOCK!

2776 2.00"22 Ton 2 / TBD TBDTBD CLEARING

20TPDAHLSTROM2465 11.0" 4 / 2.25"1.50"20 Ton

TBDMAX ROLL2994 20.0" 4 / 1.75"2.00"20 Ton (est.)

20-3-18 ARDCOR2995 24.0" L-R / 18.0" F-B 4 / 1.75"3.00"20 Ton

2CD21-100 B & K2623 22.0" L-R / 18.0" F-B 4 / 1.50"2.50"20 Ton

P-40SYODER2436 19.0" L-R / 15.0" F-B 4 / 2.25"50 Ton 2.00"

P-50YODER1308 40.5" L-R / 13.5" F-B 4 / 3.75"50 Ton 5.00"

YODER3130 14.0" L-R / 18.0" F-B 4 / 2.25"40 Ton P-406.00" NEW INSTOCK!

TBDPM MACHINE2991 24.0" L-R / 12.0" F-B 4.00"40 Ton (est.) 4 / 2.75" 2 INSTOCK!

PHOTOBELOW

PHOTOBELOW

#2262

P-5022.50" DAHLSTROM1394 11.0" L-R / 5.00" F-B 4 / 1.75"8 Ton

12-1/2 CTB & K2459 20.0" L-R / 16.0" F-B 4 / 2.00"1.00"TBD

DAHLSTROM2262 6.00" L-R / 19.0" F-B 4 / 2.25" TBDTBDTBD

1.50" MICHIGAN2484 7.50" 2 / TBD TBD5 Ton

.500" LOCKFORMER2251 12.5" 2 / TBD TBD5 Ton


1.00" PNEU POWER2348 8.50" L-R / 14.0" F-B 4 / 1.50" TBD5 Ton

.125" RAFTER116 8.50"1 Ton 2 / TBD TBDPHOTOBELOWPHOTOSBELOW

P-40YODER1742 22.0" L-R / 18.0" F-B 4.00"40 Ton 4 / TBD 2 INSTOCK!

2 INSTOCK!

OMEGA1888 25 Ton 6 / TBD TBDTBDTBD 2 INSTOCK!



Shee

t & S

trip

Mac

hine

ry


18 19

SHEET & STRIP Cut-OffsFor the full specifications of these machines, visit www.utubeonline.com

2 INSTOCK!

#2459

STOCKNUMBER

MODELNUMBER




SHEET & STRIP Cut-Offs continuedFor the full specifications of these machines, visit www.utubeonline.com

2.00" TISHKEN1395 12 Ton 2 / TBDTBD TBD




CO4-HA2.00" TISHKEN1885 8.00" 2 / 1.50"12 Ton

CO4-HW2.00" TISHKEN504 7.00" 2 / 1.50"12 Ton

4-P-123.00" PNEU POWER2333 12 Ton 4 / TBDTBD

TBDTBD PNEU POWER1988 15 Ton 4 / 2.00"16.5" L-R / 16.5" F-B

TBD1.50" PNEU POWER2346 15 Ton 4 / 2.00"24.5" L-R / 24.5" F-B

ACO-152.00" TISHKEN1998 15 Ton 4 / 1.75"12.0"

CO-6-8-182.00" TISHKEN2530 9.00" 4 / 1.75"18 Ton

CO-6-HA2.00" TISHKEN1946 8.00" 2 / 1.75"18 Ton


CO-6-HW2.00" TISHKEN1945 8.00" 2 / 1.75"18 Ton


3.00" CONTOUR2892 8.50" L-R12 Ton 4 / 1.50" TBD

CO4-HWA2.00" TISHKEN2503A TBD 2 / 1.50"12 Ton

MCO 1177-72.00" METFORM2619 4 / TBDTBD10 Ton

#1854#1549 #2436

STOCKNUMBER

MODELNUMBER




CO-12-24-80TISHKEN1854 16.0" L-R / 19.0" F-B 4 / 2.50"80 Ton 2.50"

ASC1549 117" L-R / 29.0" F-B 4 / 4.00"80 Ton 2.00" TBD

TISHKEN3339 27.5" L-R / 27.5" F-B 4 / 3.50"140 Ton CO-18-4-304.00" NEW INSTOCK!

PHOTOBELOW

C0-10-4HA1TISHKEN1944 16.0" 4 / 3.00"2.50"25 Ton

KANE & ROACH2712 10.0" L-R / 18.0" F-B 4 / 2.50"4.00"25 Ton TBD

SAMCO2186 10.5" L-R / 15.0" F-B 4 / 2.00".500"25 Ton TBD

PNEU POWER1753A 20.0" L-R / 14.0" F-B 4 / 2.00"25 Ton TBDTBD

C0-12-4HA10TISHKEN2531 6.00" L-R / 17.0" F-B 4 / 2.00"2.50"25 Ton

PNEU POWER16.0" 3.00"30 Ton486 TBD TBD

P-30YODER2007 18.0" L-R / 14.0" F-B 4 / 2.00"3.00"30 Ton

P-40YODER2463 19.0" L-R / 15.0" F-B 4 / 2.25"2.00"40 Ton

P-40YODER2434 19.0" L-R / 15.0" F-B 4.00"40 Ton 4 / 2.25"

TBDPM MACHINE2993 30.0" L-R / 19.0" F-B 3.00"30 Ton (est.) 4 / 3.00"

BRADBURY2876 12.0" L-R / 64.0" F-B 4 / 3.00"3.00"35 Ton TBD

4CT36B & K2732F 12.0" L-R / 30.0" F-B 4 / TBD4.00"36 Ton

35TALPHA1886 19.0" L-R / 9.50" F-B 4 / 2.25"3.00"35 Ton

YODER3260 14.0" L-R / 18.0" F-B 4 / 2.00"30 Ton P-30S4.00" NEW INSTOCK!

2776 2.00"22 Ton 2 / TBD TBDTBD CLEARING

20TPDAHLSTROM2465 11.0" 4 / 2.25"1.50"20 Ton

TBDMAX ROLL2994 20.0" 4 / 1.75"2.00"20 Ton (est.)

20-3-18 ARDCOR2995 24.0" L-R / 18.0" F-B 4 / 1.75"3.00"20 Ton

2CD21-100 B & K2623 22.0" L-R / 18.0" F-B 4 / 1.50"2.50"20 Ton

P-40SYODER2436 19.0" L-R / 15.0" F-B 4 / 2.25"50 Ton 2.00"

P-50YODER1308 40.5" L-R / 13.5" F-B 4 / 3.75"50 Ton 5.00"

YODER3130 14.0" L-R / 18.0" F-B 4 / 2.25"40 Ton P-406.00" NEW INSTOCK!

TBDPM MACHINE2991 24.0" L-R / 12.0" F-B 4.00"40 Ton (est.) 4 / 2.75" 2 INSTOCK!

PHOTOBELOW

PHOTOBELOW

#2262

P-5022.50" DAHLSTROM1394 11.0" L-R / 5.00" F-B 4 / 1.75"8 Ton

12-1/2 CTB & K2459 20.0" L-R / 16.0" F-B 4 / 2.00"1.00"TBD

DAHLSTROM2262 6.00" L-R / 19.0" F-B 4 / 2.25" TBDTBDTBD

1.50" MICHIGAN2484 7.50" 2 / TBD TBD5 Ton

.500" LOCKFORMER2251 12.5" 2 / TBD TBD5 Ton


1.00" PNEU POWER2348 8.50" L-R / 14.0" F-B 4 / 1.50" TBD5 Ton

.125" RAFTER116 8.50"1 Ton 2 / TBD TBDPHOTOBELOWPHOTOSBELOW

P-40YODER1742 22.0" L-R / 18.0" F-B 4.00"40 Ton 4 / TBD 2 INSTOCK!

2 INSTOCK!

OMEGA1888 25 Ton 6 / TBD TBDTBDTBD 2 INSTOCK!


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER

SHEET & STRIP Rollformers continuedFor the full specifications of these machines, visit www.utubeonline.com

KANE & ROACH12 1.937" 6.00" - 9.00" 2WFU FORM18.0"2711 14.0"

C & B12 2.00" 5.00" - 8.00"15.0"1595 8.00" TBD

TISHKEN12 2.50" 5.44" - 7.06" 12 MW2-1/212.0"2725 33.0"

ASC12 3.00" 6.00" - 9.00"18.0"3059 36.0" CAS-4-36-12

YODER12 2.00" 5.00" - 7.00"15.0"3082 17.0" M2

PROMA12 1.50" 5.50" - 8.00"12.0"1992 9.00" TBD

TISHKEN2964 6.00"12 1.50" 4.00" - 5.00" 12 MLW-1-1/28.00"

B & K / MV12 1.50" 4.00" - 6.00"14.0"3085 12.0" NR

CONTOUR12 1.50" 4.00" - 5.50" 151208, SR12.0"2861 8.00"

TISHKEN12 1.50" 4.50” - 5.50"9.00"3176 15.0" 12HMW 1-1/2 NEW INSTOCK!

ENGEL12 1.25" 4.00" (Centers)6.00"1654 4.375" TBD

TISHKEN2955 3.50"12 1.00" 5.25" (Centers) 12 RLW15.00"

CUSTOM12 TBD 5.00" - 6.00"10.5"3152 8.00" TBD NEW INSTOCK!

#3085

#3059

#1654

#2725



Shee

t & S

trip

Mac

hine

ry


20 21

SHEET & STRIP RollformersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER

BRADBURY28 3.50" 5.00" - 9.00"18.0"3136 44.0" 320 DH NEW INSTOCK!

TISHKEN2860 10.0"16 1.75" 9.00" 16HMW 1-3/44.50" - 5.50"

BRADBURY2709 24.0"16 2.50" 9.00" 315-B4.00" - 5.50"

LOCKFORMER2429 20 1.75" 12.0" L12207.00" (Centers)TBD

B&K / MV18 1.50" 4.00" - 6.00"14.0"3084 12.0" NR

LOCKFORMER2593 24 1.50" 6.00" 3.50" (Centers)TBD TBD

MAX ROLL2996 11.0"20 1.50" 9.00" TBD2.50"

YODER2733 36.0"15 3.00" 18.0" M2-1/2TBD

FLAGLER1913 8.00"16 1.125" 8.00" U-4164.00" (Centers)

ASC24 4.00" 5.00" - 9.50"18.0"3144 60.0" CAS-4 NEW INSTOCK!

RLM24 1.50" 5.50" - 7.00"12.0"3246 TBD R18-08 NEW INSTOCK!

ASC16 3.00" 5.50" - 9.00"18.0"3138 48.0" CAS-4-15-60-RH NEW INSTOCK!

ARDCOR16 TBD TBDTBD3177 TBD TBD NEW INSTOCK!

RDF2535 10.0"15 1.50" 4.50" - 6.50"12.0" TBD

B&K / MV15 1.25" 3.50" - 5.00"12.0"3087 11.0" NR

BRADBURY2614 42.0"14 2.50" 4.00" - 7.25"13.5" 415RF

LOCKFORMER14 1.25" 3.50" (Centers)6.00"1926 6.00" TBD

14 1.50" 4.50" (Centers) MU-30108.00"2335 8.00" T&H / LOCKFORMER

DAHLSTROM2979 5.00"14 2.00" 5.00" - 6.75"10.0" 450/2-14

CUSTOM14 2.50" 4.75"11.5"3150 44.0" TBD NEW INSTOCK!

RAFTER14 2.50" TBDTBD3174 40.0" TBD NEW INSTOCK!


HAYES15 2.75" 1.00" - 0.50"18.5"3252 27.0" TBD NEW INSTOCK!

TISHKEN14 1.50" 4.50" - 5.50"9.00"3267 6.00" 14 HMW 1-1/2 NEW INSTOCK!

#3136 NEW IN STOCK!

#2709#3252 NEW IN STOCK! #2614#2860

#3246 NEW IN STOCK!

PHOTOBELOW

PHOTOSBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOSBELOWPHOTOBELOW

PHOTOBELOW

PHOTOSBELOW


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER


KANE & ROACH12 1.937" 6.00" - 9.00" 2WFU FORM18.0"2711 14.0"

C & B12 2.00" 5.00" - 8.00"15.0"1595 8.00" TBD

TISHKEN12 2.50" 5.44" - 7.06" 12 MW2-1/212.0"2725 33.0"

ASC12 3.00" 6.00" - 9.00"18.0"3059 36.0" CAS-4-36-12

YODER12 2.00" 5.00" - 7.00"15.0"3082 17.0" M2

PROMA12 1.50" 5.50" - 8.00"12.0"1992 9.00" TBD

TISHKEN2964 6.00"12 1.50" 4.00" - 5.00" 12 MLW-1-1/28.00"

B & K / MV12 1.50" 4.00" - 6.00"14.0"3085 12.0" NR

CONTOUR12 1.50" 4.00" - 5.50" 151208, SR12.0"2861 8.00"

TISHKEN12 1.50" 4.50” - 5.50"9.00"3176 15.0" 12HMW 1-1/2 NEW INSTOCK!

ENGEL12 1.25" 4.00" (Centers)6.00"1654 4.375" TBD

TISHKEN2955 3.50"12 1.00" 5.25" (Centers) 12 RLW15.00"

CUSTOM12 TBD 5.00" - 6.00"10.5"3152 8.00" TBD NEW INSTOCK!

#3085

#3059

#1654

#2725



Shee

t & S

trip

Mac

hine

ry


20 21

SHEET & STRIP RollformersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER

BRADBURY28 3.50" 5.00" - 9.00"18.0"3136 44.0" 320 DH NEW INSTOCK!

TISHKEN2860 10.0"16 1.75" 9.00" 16HMW 1-3/44.50" - 5.50"

BRADBURY2709 24.0"16 2.50" 9.00" 315-B4.00" - 5.50"

LOCKFORMER2429 20 1.75" 12.0" L12207.00" (Centers)TBD

B&K / MV18 1.50" 4.00" - 6.00"14.0"3084 12.0" NR

LOCKFORMER2593 24 1.50" 6.00" 3.50" (Centers)TBD TBD

MAX ROLL2996 11.0"20 1.50" 9.00" TBD2.50"

YODER2733 36.0"15 3.00" 18.0" M2-1/2TBD

FLAGLER1913 8.00"16 1.125" 8.00" U-4164.00" (Centers)

ASC24 4.00" 5.00" - 9.50"18.0"3144 60.0" CAS-4 NEW INSTOCK!

RLM24 1.50" 5.50" - 7.00"12.0"3246 TBD R18-08 NEW INSTOCK!

ASC16 3.00" 5.50" - 9.00"18.0"3138 48.0" CAS-4-15-60-RH NEW INSTOCK!

ARDCOR16 TBD TBDTBD3177 TBD TBD NEW INSTOCK!

RDF2535 10.0"15 1.50" 4.50" - 6.50"12.0" TBD

B&K / MV15 1.25" 3.50" - 5.00"12.0"3087 11.0" NR

BRADBURY2614 42.0"14 2.50" 4.00" - 7.25"13.5" 415RF

LOCKFORMER14 1.25" 3.50" (Centers)6.00"1926 6.00" TBD

14 1.50" 4.50" (Centers) MU-30108.00"2335 8.00" T&H / LOCKFORMER

DAHLSTROM2979 5.00"14 2.00" 5.00" - 6.75"10.0" 450/2-14




HAYES15 2.75" 1.00" - 0.50"18.5"3252 27.0" TBD NEW INSTOCK!

TISHKEN14 1.50" 4.50" - 5.50"9.00"3267 6.00" 14 HMW 1-1/2 NEW INSTOCK!

#3136 NEW IN STOCK!

#2709#3252 NEW IN STOCK! #2614#2860

#3246 NEW IN STOCK!

PHOTOBELOW

PHOTOSBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOBELOW

PHOTOSBELOWPHOTOBELOW

PHOTOBELOW

PHOTOSBELOW

10 Stand x 2-1/4" x 10" PEARSONGarage Door Angle Line, Stock #3111SPECIFICATIONS:Number of Stands: 10Line Direction: Left to RightSpindle Diameter: 2-1/4"Roll Space: 10"Horizontal Center: 12"Vertical Adjustment: 5-3/4" - 6-1/2"Base Top to Center Lower Spindle: 5-1/2"

EQUIPPED WITH:(1) 4,000 Lb. LITTELL Uncoiler:Model #40-18, S/N: S-3178-67Maximum Coil O.D.: 60"Maximum Coil Width: 15" - 20"Coil I.D. Range: 18"Electric Brake, Manual Expansion

(1) Flattener:2 over 3 Roll

(1) B&K Pre-PunchStroke: 1"Die Area: 23" x 26"

(1) 40 Ton YODER P-40 Cut-Off Press:Stroke: 2"Post Diameter: 2-1/4"Die Area: 18" x 32"Distance Between Posts: 17" F-B, 13" R-LAdjustable Base, MINSTER Clutch/Brake, Air Valve, RailsMotor: 5 HP

Tooled for

Standard

Perforated

Garage Door

Angle

Featured Rollform Line:




23

Shee

t & S

trip

Mac

hine

ry

22

SHEET & STRIP Rollformers continuedFor the full specifications of these machines, visit www.utubeonline.comFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER

PEARSON2349 12.0"10 1.75" 5.00" - 6.00" 1-3/412.0"

TISHKEN2760 3.50"10 1.00" 2.75" - 3.75" 10-4-1-14.50"

CUSTOM1699 4.75"10 1.00" 2.50" (Centers)4.00" TBD

TISHKEN2758 7.00"10 1.00" 3.25" - 4.25"7.00" TBD

DAHLSTROM2759 8.00"10 1.00" 3.25" - 4.25" 340-147.00"

YODER1993 8.00"10 1.50" 4.00" - 9.00" M1-1/218.0"

TISHKEN2953 6.00"10 1.50" 4.00" - 5.00" 110 MLW128.00"

ENGEL10 1.25" 3.00" (Centers) DH3510-45.00"1912 TBD

LOCKFORMER2781 12.0"10 1.37" 5.00" (Centers) L-8108.00"

BRADBURY2910 54.0"10 3.00" 9.00" - 10.0" M316.0"

LOCKFORMER2249 6.00"10 1.12" 3.50" (Centers)6.00" TBD 2 INSTOCK!

B & K / MV10 1.25" 4.00" - 5.00"12.0"3086 10.0" NR

ENGEL10 2.50" TBD10.0"3151 3.50" TBD NEW INSTOCK!

TISHKEN10 1.50" 4.50" - 5.50"8.00"3189 6.00" 10-HM-1-1/2 NEW INSTOCK!

TISHKEN10 1.75" 4.50" - 5.50"9.00"3266 6.00" 10HMW1-3/4 NEW INSTOCK!


PEARSON10 2.25" 5.75" - 6.50"12.0"3111 10.0" 40-18 NEW INSTOCK!

#2249 #2759#3111

#2910

PHOTOBELOW


PHOTOSBELOW

10 Stand x 2-1/4" x 10" PEARSONGarage Door Angle Line, Stock #3111SPECIFICATIONS:Number of Stands: 10Line Direction: Left to RightSpindle Diameter: 2-1/4"Roll Space: 10"Horizontal Center: 12"Vertical Adjustment: 5-3/4" - 6-1/2"Base Top to Center Lower Spindle: 5-1/2"

EQUIPPED WITH:(1) 4,000 Lb. LITTELL Uncoiler:Model #40-18, S/N: S-3178-67Maximum Coil O.D.: 60"Maximum Coil Width: 15" - 20"Coil I.D. Range: 18"Electric Brake, Manual Expansion

(1) Flattener:2 over 3 Roll

(1) B&K Pre-PunchStroke: 1"Die Area: 23" x 26"

(1) 40 Ton YODER P-40 Cut-Off Press:Stroke: 2"Post Diameter: 2-1/4"Die Area: 18" x 32"Distance Between Posts: 17" F-B, 13" R-LAdjustable Base, MINSTER Clutch/Brake, Air Valve, RailsMotor: 5 HP

Tooled for

Standard

Perforated

Garage Door

Angle

Featured Rollform Line:




23

Shee

t & S

trip

Mac

hine

ry

22

SHEET & STRIP Rollformers continuedFor the full specifications of these machines, visit www.utubeonline.comFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER

PEARSON2349 12.0"10 1.75" 5.00" - 6.00" 1-3/412.0"

TISHKEN2760 3.50"10 1.00" 2.75" - 3.75" 10-4-1-14.50"

CUSTOM1699 4.75"10 1.00" 2.50" (Centers)4.00" TBD

TISHKEN2758 7.00"10 1.00" 3.25" - 4.25"7.00" TBD

DAHLSTROM2759 8.00"10 1.00" 3.25" - 4.25" 340-147.00"

YODER1993 8.00"10 1.50" 4.00" - 9.00" M1-1/218.0"

TISHKEN2953 6.00"10 1.50" 4.00" - 5.00" 110 MLW128.00"

ENGEL10 1.25" 3.00" (Centers) DH3510-45.00"1912 TBD

LOCKFORMER2781 12.0"10 1.37" 5.00" (Centers) L-8108.00"

BRADBURY2910 54.0"10 3.00" 9.00" - 10.0" M316.0"

LOCKFORMER2249 6.00"10 1.12" 3.50" (Centers)6.00" TBD 2 INSTOCK!

B & K / MV10 1.25" 4.00" - 5.00"12.0"3086 10.0" NR

ENGEL10 2.50" TBD10.0"3151 3.50" TBD NEW INSTOCK!


TISHKEN10 1.75" 4.50" - 5.50"9.00"3266 6.00" 10HMW1-3/4 NEW INSTOCK!


PEARSON10 2.25" 5.75" - 6.50"12.0"3111 10.0" 40-18 NEW INSTOCK!

#2249 #2759#3111

#2910

PHOTOBELOW


PHOTOSBELOW



24

Shee

t & S

trip

Mac

hine

ry

#3166 4” DIA. GUTTERS

#3083


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER


ARDCOR2065 10.0"7 1.75" 4.00" - 7.00" 1F14.0"

ENGEL2163 1.00"8 4.00" TBDTBDTBD

METFORM2618 6.00"8 1.25" 4.50" - 4.75" MCO 1177-67.00"

DAHLSTROM1991 10.0"8 2.00" 5.50" - 7.00" 550-811.0"

B & K2622 16.0"8 2.00" 4.00" - 7.00" 1B-0511.0"

TISHKEN2441 8.00"8 2.00" 5.50" - 7.00" 8MW-212.0"

TISHKEN2466 8.00"8 2.00" 5.50" - 7.00" MW-212.0"

KANE & ROACH2715 32.0"9 2.50" 5.00" - 8.00" 57915.0"

C & B1594 8.00"8 2.00" 5.00" - 8.00"15.0" TBD

DETROIT1865 8.00"8 1.50" TBDTBD TBD

YODER8 2.50" 5.00" - 7.00"15.0"3083 16.0" M2

DAHLSTROM2978 5.00"8 1.50" TBD 350/2-86.50"


TISHKEN2478 6.00"4 1.50" 3.50" - 5.00" MLW 1-1/28.00"

ARDCOR2694 10.0"6 1.75" 4.25" - 7.125" 1F14.0"

ARTOSE7 TBD TBDTBD3166 TBD TBD 4” DIA.GUTTERS



25

COMPLETE MACHINERECONDITIONING:

Universal can restore your current machinery to like-new condition,giving you enhanced quality and performance.

Retrofit Re-Power Systems:Improve performance and keep up with demand.

NEW Completely assembled 480V AC variablespeed drive system with all control componentsNEW Push button consoleNEW Remote jog pendantNEW E-Stop stationNEW AC Inverter duty motor (optional)Complete AutoCAD drawing packagefor ease of Installation.

Tube Mill LinesRollform LinesCoil Handling Machinery

Reconditioning For:Whether it's one single machine ora complete line, we would be happyto send you a quotation for this service.

What Are The Benefits?Outstanding cost savingsAccurate and reliable productionEnhanced safety Extended machine lifeDocumentation for retrofitsEase of operationInstallation servicesTraining services

PHOTOSBELOW

PHOTOSBELOW



24

Shee

t & S

trip

Mac

hine

ry

#3166 4” DIA. GUTTERS

#3083


MODELNUMBER

SPINDLEDIAMETER

VERTICALADJUSTMENT

ROLLSPACE

NUMBER OFSTANDS

HORIZONTALCENTER


ARDCOR2065 10.0"7 1.75" 4.00" - 7.00" 1F14.0"

ENGEL2163 1.00"8 4.00" TBDTBDTBD

METFORM2618 6.00"8 1.25" 4.50" - 4.75" MCO 1177-67.00"

DAHLSTROM1991 10.0"8 2.00" 5.50" - 7.00" 550-811.0"

B & K2622 16.0"8 2.00" 4.00" - 7.00" 1B-0511.0"

TISHKEN2441 8.00"8 2.00" 5.50" - 7.00" 8MW-212.0"

TISHKEN2466 8.00"8 2.00" 5.50" - 7.00" MW-212.0"

KANE & ROACH2715 32.0"9 2.50" 5.00" - 8.00" 57915.0"

C & B1594 8.00"8 2.00" 5.00" - 8.00"15.0" TBD

DETROIT1865 8.00"8 1.50" TBDTBD TBD

YODER8 2.50" 5.00" - 7.00"15.0"3083 16.0" M2

DAHLSTROM2978 5.00"8 1.50" TBD 350/2-86.50"


TISHKEN2478 6.00"4 1.50" 3.50" - 5.00" MLW 1-1/28.00"

ARDCOR2694 10.0"6 1.75" 4.25" - 7.125" 1F14.0"

ARTOSE7 TBD TBDTBD3166 TBD TBD 4” DIA.GUTTERS



25

COMPLETE MACHINERECONDITIONING:

Universal can restore your current machinery to like-new condition,giving you enhanced quality and performance.

Retrofit Re-Power Systems:Improve performance and keep up with demand.

NEW Completely assembled 480V AC variablespeed drive system with all control componentsNEW Push button consoleNEW Remote jog pendantNEW E-Stop stationNEW AC Inverter duty motor (optional)Complete AutoCAD drawing packagefor ease of Installation.

Tube Mill LinesRollform LinesCoil Handling Machinery

Reconditioning For:Whether it's one single machine ora complete line, we would be happyto send you a quotation for this service.

What Are The Benefits?Outstanding cost savingsAccurate and reliable productionEnhanced safety Extended machine lifeDocumentation for retrofitsEase of operationInstallation servicesTraining services

PHOTOSBELOW

PHOTOSBELOW



Shee

t & S

trip

Mac

hine

ry


26 27

CUSTOM3153 TBD TBDTBD114" (2895mm) TBD NEW INSTOCK!

SHEET & STRIP SlittersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUM STRIPTHICKNESS ARBOR

MAXIMUMCOIL WEIGHT

MAXIMUMSTRIP WIDTH

PAXSON1614 .250" (6.35mm) 8.00” (203mm) DIA.x 54.0" (1371mm) L35,000 LB.52.0" (1320mm) TBD

3744YODER1182 .125" (3.17mm) LENGTH:28.0" (711mm)5,000 LB.24.0" (609mm)

YODER / CAUFFIEL2756 7.00" (177mm) DIA.

x 60.0" (1524mm) L20,000 LB.48.0" (1219mm) TBD TBD

TACHEOLADE2520 4.00" (101mm) DIA.

x 22.0" (558mm) L10,000 LB.26.0" (660mm) TBD TBD

PAXSON2030 DIA.:3.75" (95.2mm)10,000 LB.20.0" (508mm) TBD TBD

1AW BRACEENGLAND2793 .006" (.152mm) LENGTH:

28.0" (711mm)5,000 LB.13.5" (342mm)

YODER448 .050" (1.27mm) DIA.:3.00" (76.2mm)4,000 LB.16.0" (342mm) TBD

1359 TORRINGTON12.0" (304mm) TBD TBD TBD TBD

SHEET & STRIP Rolling MillsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

ROLLWIDTH ROLLING SPEED

ROLLDIAMETER

MARSHALL RICHARDS2787 6.00" (150mm) 0 - 65 ft./min. (0 - 20m/min.)5.50" (135mm) SERIAL #661846

DECO MACHINERY2314 7.00" (177mm)7.37" (187mm) SERIAL #1594TBD

#2756

#2793

#2520

SHEET & STRIP FlattenersFor the full specifications of these machines, visit www.utubeonline.com


MAXIMUM STRIPTHICKNESS

WORKROLLS

ROLLDIAMETER

MAXIMUMSTRIP WIDTH

MODELNUMBER

US TOOL CO.(3 over 4)1.25" (31.7mm)6.00" (152mm) RS1143 NR

JAYBIRD1.50" (38.1mm) 7-Roll (2 over 3)18.0" (457mm) J15-18242962 NR

LITTELL.062" (1.57mm) 7-Roll (3 over 4)30.0" (762mm) 432-7PDL1959

MECON.150" (3.81mm) 2.25" (57.1mm)19.0" (482mm) SERVO FEEDER2732D NR

DAHLSTROM(8 over 7)2.00" (50.8mm)1930 NR24.0" (609mm) 28-18-17

LITTELLNR 3.00" (76.2mm)12.0" (304mm) NR2986 (2 over 3)

4-Roll (3 over 4)2.00" (50.8mm)6.00" (152mm)2783 NR NR NR

7-Roll (3 over 4)3.00" (76.2mm)24.0" (609mm)3010 18 GA. COE CF-500 NEW INSTOCK!

#2986#2962

SHEET & STRIP AccumulatorsFor the full specifications of these machines, visit www.utubeonline.com

MANUFACTURERMODEL

NUMBERMINIMUM

STRIP WIDTHMINIMUM

STRIP THICKNESSMAXIMUM


STRIP WIDTHSTOCK

NUMBER

KENT3337 2.00" (50.8mm) .035" (.889mm).125" (3.17mm)10.0" (254mm) R22-RE

WLHT165-HYSRET2681 5.90" (150mm) .150" (3.80mm).300" (7.60mm)18.1" (460mm) NEW!

YODER3335 TBD 7.00" (177mm) DIA.67.0" (1701mm) L30,000 LB.48.0" (2133mm) 7S

PHOTOBELOWPHOTOSBELOW

PHOTOSBELOW

PHOTOSBELOW

PHOTOSBELOW

NEW INSTOCK!



Shee

t & S

trip

Mac

hine

ry


26 27

CUSTOM3153 TBD TBDTBD114" (2895mm) TBD NEW INSTOCK!

SHEET & STRIP SlittersFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

MAXIMUM STRIPTHICKNESS ARBOR

MAXIMUMCOIL WEIGHT

MAXIMUMSTRIP WIDTH

PAXSON1614 .250" (6.35mm) 8.00” (203mm) DIA.x 54.0" (1371mm) L35,000 LB.52.0" (1320mm) TBD

3744YODER1182 .125" (3.17mm) LENGTH:28.0" (711mm)5,000 LB.24.0" (609mm)

YODER / CAUFFIEL2756 7.00" (177mm) DIA.

x 60.0" (1524mm) L20,000 LB.48.0" (1219mm) TBD TBD

TACHEOLADE2520 4.00" (101mm) DIA.

x 22.0" (558mm) L10,000 LB.26.0" (660mm) TBD TBD

PAXSON2030 DIA.:3.75" (95.2mm)10,000 LB.20.0" (508mm) TBD TBD

1AW BRACEENGLAND2793 .006" (.152mm) LENGTH:

28.0" (711mm)5,000 LB.13.5" (342mm)

YODER448 .050" (1.27mm) DIA.:3.00" (76.2mm)4,000 LB.16.0" (342mm) TBD

1359 TORRINGTON12.0" (304mm) TBD TBD TBD TBD

SHEET & STRIP Rolling MillsFor the full specifications of these machines, visit www.utubeonline.com


MODELNUMBER

ROLLWIDTH ROLLING SPEED

ROLLDIAMETER

MARSHALL RICHARDS2787 6.00" (150mm) 0 - 65 ft./min. (0 - 20m/min.)5.50" (135mm) SERIAL #661846

DECO MACHINERY2314 7.00" (177mm)7.37" (187mm) SERIAL #1594TBD

#2756

#2793

#2520

SHEET & STRIP FlattenersFor the full specifications of these machines, visit www.utubeonline.com


MAXIMUM STRIPTHICKNESS

WORKROLLS

ROLLDIAMETER

MAXIMUMSTRIP WIDTH

MODELNUMBER

US TOOL CO.(3 over 4)1.25" (31.7mm)6.00" (152mm) RS1143 NR

JAYBIRD1.50" (38.1mm) 7-Roll (2 over 3)18.0" (457mm) J15-18242962 NR

LITTELL.062" (1.57mm) 7-Roll (3 over 4)30.0" (762mm) 432-7PDL1959

MECON.150" (3.81mm) 2.25" (57.1mm)19.0" (482mm) SERVO FEEDER2732D NR

DAHLSTROM(8 over 7)2.00" (50.8mm)1930 NR24.0" (609mm) 28-18-17

LITTELLNR 3.00" (76.2mm)12.0" (304mm) NR2986 (2 over 3)

4-Roll (3 over 4)2.00" (50.8mm)6.00" (152mm)2783 NR NR NR

7-Roll (3 over 4)3.00" (76.2mm)24.0" (609mm)3010 18 GA. COE CF-500 NEW INSTOCK!

#2986#2962

SHEET & STRIP AccumulatorsFor the full specifications of these machines, visit www.utubeonline.com

MANUFACTURERMODEL

NUMBERMINIMUM

STRIP WIDTHMINIMUM



STRIP WIDTHSTOCK

NUMBER

KENT3337 2.00" (50.8mm) .035" (.889mm).125" (3.17mm)10.0" (254mm) R22-RE

WLHT165-HYSRET2681 5.90" (150mm) .150" (3.80mm).300" (7.60mm)18.1" (460mm) NEW!

YODER3335 TBD 7.00" (177mm) DIA.67.0" (1701mm) L30,000 LB.48.0" (2133mm) 7S

PHOTOBELOWPHOTOSBELOW

PHOTOSBELOW

PHOTOSBELOW

PHOTOSBELOW

NEW INSTOCK!

WORKING TOGETHER WITH UNIVERSALCONTROLS GROUP TO OFFER YOU MORE!

CREATORS OF THE UTRAKTM LENGTH CONTROL SYSTEM FORFLYING CUT-OFFS & THE HAVENTRAKTM FLYING SHEAR.

Our capabilities go even further, working together with Universal Controls Group (UCG) to bring you the options you need such as new controls, drive systems, die accelerators,

length control and other accessories to retrofit your existing machinery.UCG has also built multi motor drive systems exceeding 1000 HP. The Drives

are self-contained eliminating the need for multi-cabinet systems. Hence, the installation cost becomes drastically reduced.

SPECIALIZING IN USED AND RECONDITIONED TUBE,PIPE & ROLLFORM MACHINERY FOR 30 YEARS.

Universal Tube & Rollform has always been committed to being the number one supplierof used tube, pipe and rollform machinery in the world. We have one of the largest selectionsof used tube and pipe mills available. Utilizing over 125,000 square feet of warehouse space, we also stock rollformers, cut to length lines, slitting lines, High Frequency welders and more.

We have the resources and expertise to satisfy your company's machinery needs.


We Buy & Sell

ITA

NEW Controls & Drive Systems Recondition, Re-Power & UpgradeLarge Inventory of used Tube Mills,Pipe Mills and Rollformers

Universal Tube & Rollform Equipment Corporation

Universal Tube & Rollform Equipment Corporation and Universal Controls Group reserve the right to change any and all information in this catalog without notice.Care is taken to give reliable descriptions but these are not guaranteed. Prospective purchasers are advised to check vital details. We reserve the right to correct

stenographic errors. All machinery is subject to prior sale. Visit www.utubeonline.com for conditions of sale.

Universal Tube & Rollform Equipment CorporationUniversal Controls Group 26202 Glenwood Rd. Perrysburg Ohio 43551 USA • [email protected]

•

UNIVERSAL TUBE & ROLLFORMEQUIPMENT CORPORATIONInternational Used Metalworking Machinery Dealer

Documents

UNIVERSAL TUBE & ROLLFORM SPECIALIZING IN … · TIG Tube Mills ... - Ease of Operation - Installation Services - Training Services - Documentation for Retrofits 419-872-2364 •