UltraAir Poly Pipe & Fittings - Elite Compressed Air...UltraAir Poly Pipe uses socket fusion and electrofusion fittings to create a cost effective, fully welded, leak proof solution

ultramax.net

[email protected]

31 Morgan Street, Cannington, WA 6107

Western Australia: 08 9458 4477 Victoria: 03 9013 0560 Queensland: 07 3463 0620 New South Wales: 02 9086 9250 South Australia: 08 8312 4552 Northern Territory: 08 8998 9626

An Investech Group Company

Exporting to the World

Aust

ralia

n Ca

talo

gue

Innovators, Manufacturers & Distributors 100% Australian Owned

System Setup

Pipe Range

Metric Compression Fittings

Socket Fusion Fittings

Electrofusion Fittings

Clips & Fixtures

Installation Tools

Technical Manual

UltraAir Poly Pipe & FittingsEDITION 1.1 - Published November 2015

Compressed Air | Vacuum | GasesT: 08 9458 [email protected]

2015

Ultr

aAir

Poly

Pip

e &

Fitt

ings

Mas

ter C

atal

ogue

COPY CONTROLLED DOCUMENTNot to be distributed without permission

from Ultramax

INDEX

NOTE: 1. Special pricing can be negotiated on large projects – subject to quantities

required.

2. Prices are nett unless specified and authorised. Prices exclude GST. Prices in Australian dollars.

3. Whilst large stocks of most items are available, all prices shown are subject to availability at time of ordering.

4. Prices, although fixed at time of printing, may vary without prior notification.

5. This document is copyright and is not to be copied, circulated, distributed or disclosed to anyone other than the distributor without the expressed permission of Ultramax Systems.

6. All sales subject to our standard terms and conditions – available on request.

7. Please ensure the appropriate product specifications for your specific application.

8. Installation service available if required.

9. While great strides have been taken to ensure the data provided here is as accurate as possible, it’s accuracy is not guaranteed. Data is provided as is. Use this data at your own risk. There are no warranties, either expressed or implied.

UltraAir Piping Systems Overview . . . . . 4

System Setup . . . . . . . . . . . . . . 12

Metric Compression Fittings . . . . . . . 14

Terminal Blocks - Compression . . . . . . 20

Socket Fusion Fittings . . . . . . . . . . 22

Terminal Blocks - Socket Fusion . . . . . 26

Electrofusion Fittings . . . . . . . . . . . 28

Terminal Blocks - Electrofusion . . . . . . 36

Stub Flange Kits . . . . . . . . . . . . . 38

Bolt Sets . . . . . . . . . . . . . . . . 40

Valves & Flanges . . . . . . . . . . . . 41

Installation Tools . . . . . . . . . . . . . 42

Continuous Support Channel . . . . . . . 46

Clips & Fixings . . . . . . . . . . . . . 48

Filter / Regulator / Lubricator . . . . . . . 56

Timed Solenoid Drains . . . . . . . . . . 59

Condensate Drains . . . . . . . . . . . 62

Mufflers . . . . . . . . . . . . . . . . 64

Pressure Gauges . . . . . . . . . . . . 68

Safety Relief Valves . . . . . . . . . . . 70

Brass Fittings . . . . . . . . . . . . . . 71

Thread Sealing Products . . . . . . . . . 75

Ball Valves . . . . . . . . . . . . . . . 76

Compressed Air Quick Couplers . . . . . 80

Hose Reels . . . . . . . . . . . . . . . 85

UltraAir Flexi Hoses . . . . . . . . . . . 86

Air Hose . . . . . . . . . . . . . . . . 88

Pneumatic Tube Fittings . . . . . . . . . 89

G Series Filters . . . . . . . . . . . . . 90

Water Separators . . . . . . . . . . . . 94

Technical & Installation Guide . . . . . . . 96

Terms & Conditions of Sale. . . . . . . 104

1

TO THE W ORLD

EXPORTING

Our Vision P To bring the quality and functionality of every product to every customer.

P Our products will be distinguished by their quality and dependability.

P Our customers will rely on our products and services as key to their business

Our StoryUltramax Systems is a privately owned Australian company that specialises in providing state-of-the-art and top quality products to the industrial sector.

Since 1997, Ultramax has developed and is proven as a specialist innovator, manufacturer, and distributor of pipeline and filtration products.

The company’s extensive product and service offering includes pipeline and filtration products to suit every industry with competitive pricing founded on a dedication to quality, operational reliability, and excellent customer care.

To those of you that are already familiar and trading with Ultramax Systems, I’d like to say, ‘Thank you for your support’, and to anyone who is yet to experience the Ultramax success story I say, ‘Welcome, I look forward to hearing from you’

Matt Morren Ultramax Systems Chief Executive Officer

ULT

RA

MA X S Y S T E M

S

W

E S T E R N A U S T RA

[email protected]

www.ultramax.net.au

tel: 08 9458 4477

fax: 08 9458 4470

31 Morgan St.

Cannington WA 6107

Certificate of Conformity

(AS4130 & AS4131)

October 19, 2015

ULT

RA

MA X S Y S T E M S

WE S T E R N A U S

TR

AL

IA

Document Reference Number:

Product:

Model(s):

The UltraAir Pipe has been evaluated by an independent manufacturers test laboratory

against the requirements of AS4130 Pressure Piping, based on performance testing for

certification to the relevant parts of this standard.

Result testing to this standard demonstrates that the UltraAir Pipe is able to comply with the

requirements of AS4130 Pressure Piping. UltraAir complies with AS4131, the requirements

for Polyethylene (PE) compounds for pressure pipes and fittings.

The UltraAir Pipe is colour coded with base identification colour in accordance with AS1345:

Identification of the contents of pipes, conduits and ducts.

AIR–15–3–REP–4130/AS4131–1

UltraAir Piping System

Polyethylene Piping Range

Matt Morren

Ultramax Systems

Australian StandardsAS 4130 AS 4131AS 1345

2 3

DSFilt-David

UltraAir Piping SystemsWhy use UltraAir Compressed Air Poly Pipe?

The UltraAir Poly Pipe system is built from PE100 grade plastic, a durable and economical material renowned for its strength and quality. A product of advanced material engineering it is ideally suited for a range of industries and out preforms many traditional systems in a host of capabilities including air pressure, air flow, corrosion resistance and many more. Additionally it has a high degree of compatibility with compressor oils and is easily and quickly installed and maintained on site.

Supporting the UltraAir Poly Pipe system is a range of robust fittings (including Compression, Socket and Fusion Welding options), tools, fittings and fixtures – offering a complete and flexible compressed air solution. Below are a range of key factors to consider when considering our poly pipe system:

Rust Proof & Corrosion Resistant A inherit disadvantage in galvanized steel piping systems is the natural process of corrosion, which subsequently leads to problems of air supply contamination, damaged tools, increased friction, overall lose of efficiency and increased need for component repair and replacement. UltraAir’s poly-pipe system eliminates these corrosion-based issues whilst providing a material highly resistant to external damage.

Broad Chemical Resistance UltraAir PE poses excellent natural chemical resistance and is ideally suited for use in harsh, highly corrosive environments. Offering both Socket and Electro Fusion fitting options, it offers both a high degree of safety. UltraAir is ideal for use in a highly corrosive environment such as mineral processing and perfect for underground installations.

Strong, Light Weight & Non-Conductive UltraAir Poly-Pipe Systems are both lightweight and strong, further aiding in quick and easy installation and offer an increased range of installation options, such as being able to fix into or onto cable trays or secured with pipe clips or cable ties where suitable. Additionally as plastics do not readily conduct electricity, UltraAir Poly Piping is considered non-conductive.

Fully Welded SystemThe fusion jointing process is the joining of the two components by melting two aligned interfaces; merging the melts, and solidifying the unified melt by cooling under pressure, giving a truly leak proof joint. UltraAir Poly Pipe uses socket fusion and electrofusion fittings to create a cost effective, fully welded, leak proof solution that proves invaluable for use in compressed air systems where capital, electricity and maintenance are significant production cost factors.

Quick, Clean & Simple Installation Traditional piping systems can often be cumbersome and restrictive, with tedious, time consuming installation processes. The UltraAir Poly-Pipe system can be up to 2-5 times faster to install, due to its ease of being cut by hand, overall light weight and its robust range of fitting options which allows for hot tapping into a live system for alteration and additions with no need for system wide shut-downs.

UltraAir Piping Systems

Ultramax’s UltraAir Co-extruded pipe is designed for use indoors and outdoors, above ground and below ground installations.

Our PE100 pipe is manufactured with a highly reflective blue external skin which reduces heat absorption. During manufacturing the blue outer layer is co-extruded with the inner black pipe wall and forms an integral part of the pipe giving the pipe qualities that are ideally suited for use in full sunlight installations. Testing has proved that heat absorption is reduced, whilst maintaining UV stability.

Co-extrusion is the process of pressing two or more materials through the same die to produce a single piece. In standard extrusion, solid plastic pellets are gravity fed into a forming mechanism, where jacketed compression screws melt and feed the materials into a die. By contrast, co-extrusion involves multiple extruders forming layered pipes.

Unlike ordinary plastic mixing, each individual plastic retains its original properties, but is combined into a compound-material part. This material also contains UV stabilisers enabling pipe to be used outdoors for up to 100 Years in direct sunlight.

As with all the pipe in our PE100 range, our co-extruded blue is manufactured to meet or exceed the specifications of AS/NZS 4130: PE Pipes for Pressure Applications.

UltraAir Co-Extrusion Technology

Co-extruded reflecting light & reduces heat absorption. Suitable for use in direct sunlight

Back inner core impedes UV penetration

Food Grade MaterialUltraAir pipe and fittings do not support micro-organisms or bacterial growth and conform with AS2070.1 making them safe for use within such facilities as food processing plants, dairies etc. Furthermore, UltraAir compression fittings similarly conform to AS4120, BS6920 standards.

Low Noise & Vibration TransmissionVibrations can cause problems in compressed air systems, loosening fittings and fixtures, causing leaks, lower system efficiency and generate unwanted noise. UltraAir Poly-Pipes are inherently flexible and act as shock absorbers, reducing transmission vibrations.

AUSTRALIAN TOUGH

Designed & Built for Harsh Australian

ConditionsMADE IN AUSTRALIA

4 5

DSFilt-David

UltraAir Piping Systems UltraAir Piping SystemsAi

r Com

pres

sor

WS

Wat

er S

epar

ator

High

Pre

ssur

eFi

lter H

ousi

ng

Refri

gera

tion

Drye

r

DRAINAGE LINE (WATER AND OIL)

Oil /

Wat

er S

epar

ator

Filter Regulator Lubricator

AutoDrain

MX MY

Pre

Filte

r

Fina

l Filt

er

Air R

ecei

ver

Bypass Valves

Compression Fittings

Socket FusionFittings

Under PressureTapping Saddle

ElectrofusionFittings

Threaded Twin Take Off Saddles

Airhose Reel

Flange Adaptor

� Simple, fast and easy to install vs traditional systems

� Light Weight & Strong Food Grade Material

� Rust Proof, Non-conductive and Corrosion Resistant

� Chemical and Fracture Resistance

� Suitable for Breathing Air Systems

� Easy to Alter or Adapt Under-pressure

� PE100 Grade – Impact & Vibration Absorbent

� Built to ISO9001 and AS4130 / AS4141 Standards.

� Wide Range of Sizes Inc. 20mm – 160mm

� Extensive Range of Fittings Inc. Compression, Socket & Electro-fusion

� 50 Year Warranty

Key FeaturesAustralian Standards UltraAir Piping Systems meets Australian Standards AS4130 & AS4131 and made in Australia under strict ISO 9001:2008 Certified Quality Systems. UltraAir PE 100 is the highest grade of PE in Australian Standard AS4131 and is coloured blue to assist in identification and colour coding without painting. (Australian Standards require marking/colour coding).

Guarantee UltraAir PE 100 pipe is manufactured in accordance to AS 4130 / AS 4131 and is accordingly guaranteed for 50 years provided recommended design, installation and operation practices are adopted. As established from long term testing, PE 100 may be operated continuously under pressure for up to 100 years at 20 deg°C.

AS/

NZ4130 STANDARD

QU

ALITY GUARANTEE

50YEAR

ISO 9001 QUALITY

TM

6 7

UltraAir Piping Systems UltraAir Piping Systems

Designed for Australian Standards Ultramax UltraAir HDPE Pipe Meets Australian Standards AS4130 & AS4131 and is made in Australia under strict ISO 9002 Certified Quality Systems. UltraAir PE 100 is the highest grade of PE available in the Australian Standards (AS4131). Its Blue base colour is designed to assists in identification and colour coding without the need for painting and is a requirement of Australian Standards colour coding AS1345.

Ultramax UltraAir HDPE Pipe is colour coded with a base colour in accordance with Australian standards AS 1345. The importance of pipe labelling should not be overlooked, having a successful pipe identification program helps both employees and external contractors quickly and effortlessly distinguish between pipes during maintenance, and also enhances and facilitates traceability for repairs, saving you time and money. In time critical emergencies, pipe markers aid emergency responders in the quick identification of pipes’ contents, and can make a difference between life and death.

Production BatchAU / NZ Standard MarkingPipe Size Brand Name

Product Code Compressed Air Marking

Pressure Rating

Compressed Air Pipe Markings - AS 1345

Condensation within air systems occurs naturally and can often undermine the efficiency of an otherwise excellent air solution setup and potentially lead to damaged equipment. Solutions are often found through the use of cumbersome swan-neck setups and costly drainage points.

The UltraAir range of innovative anti-condensation fittings alleviates this issue. Through the use of efficient internal system designs, fluid is trapped within the ring main, preventing it from reaching and damaging any connected equipment. This condensation can then be drained off conveniently at one main drainage point.

Our range of condensation fittings also function as reducing tees for drop leg setups and components, removing the need for further fittings, and can be used both horizontally and vertically with 360-degree rotation.

� Stops condensate from reaching and damaging equipment

� Eliminates the need for a conventional swan neck fitting

� Automatically reduces pipe size from ring main to drop leg

� Can be used vertically or horizontally (360° rotation)

UltraAir Anti-Condensation Systems

Key Features

Twin Outlet Couplings Branch SaddleSaddle Single Outlet

If you have ever wanted to be able to tee-in or modify an existing compressed air system on the fly, without the need for a complete shut down, then the UltraAir Hot Tap saddles are just what you need. Designed around an innovative live drilling system, installers are able to safely and efficiently drill into a compressed air piping system whilst under full working pressure and fit a host of connections and droppers.

Our quick and easy Hot Tap process can be carried out in minutes by utilizing our purpose built drill kits, which not only allow installation and drilling under full pressure but also integrates an exhaust chamber system, which traps particles and debris. This catchment system ensures that no contamination enters the piping, maintaining the system’s integrity and efficiency throughout the installation. See our technical section for full details.

¡ Systems need not be de-pressurized for Hot Tap Saddle installation

¡ Hot Tap Saddles are hinged, making installation fast and easy

¡ Hot Tap Saddles are also Anti-condensation fittings, preventing water condensation from reaching equipment

¡ Installation tool design prevents particles & debris from entering the system during installation

¡ Can be utilized anywhere along a compatible air line

¡ Available for a range of pipe and connection sizes

¡ Unique spacer system allows only two coupling sizes to fit 6 pipe diameters

UltraAir – Under Pressure Hot Tap System

Australian StandardsAS 4130 AS 4131AS 1345

H20

H20

8 9

DSFilt-David

UltraAir Poly Piping Systems Compressed Air Fittings

Socket Fusion Reducing Coupling

Socket Fusion Reducing Tee

Compression Fitting Universal Adaptor

Clips & Fittings

Compression Fitting Equal Tee

Electrofusion 90° Elbow

Compression Fitting End Cap

Terminal Block

Socket Fusion Threaded Tee - Female

Twin Off Take Saddle

Electrofusion Reducing Tee

Compression Fitting 90° Elbow

Socket Fusion 90° Elbow

Tapping Saddle

10 11

UltraAir System Setup

Select outlet filtration, regulation, lubrication and quick couplings, hoses, etc. vto suit your requirements.

STEP THREE: SELECT OUTLET REQUIREMENTS

Pipe Straight Lengths

Product Code Length (Meters)Wall

Thickness (mm)PN Rating / Bar

NOM. I.D (Imperial Equivalent)

O.D (mm) $ Price (per 6m)

AIR 20 6 2.8 PN25 5/8” 20 24.00

AIR 25 6 3.5 PN25 3/4” 25 33.00

AIR 32 6 4.4 PN25 1” 32 49.00

AIR 40 6 5.5 PN25 1 1/4” 40 73.00

AIR 50 6 6.9 PN25 1 1/2” 50 97.00

AIR 63 6 8.6 PN25 2” 63 117.00

AIR 90 6 12.5 PN25 3” 90 238.00

AIR 110 6 15.2 PN25 4” 110 320.00

AIR 160 6 or 12 22 PN25 6” 160 630.00

Pipe Coils

Product Code Diameter (mm) Length (m) Coil Diameter (mm) PN Rating / Bar $ PriceAIR 20 COIL 20 100 1030 25 330.00

AIR 25 COIL 25 100 1030 25 457.00

AIR 32 COIL 32 100 1030 25 679.00

AIR 40 COIL 40 100 1250 25 1010.00

AIR 50 COIL 50 100 2000 16 1342.00

AIR 63 COIL 63 100 2300 16 1620.00

AIR 90 COIL 90 100 2600 16 1850.00

AIR 110 COIL 110 100 2600 16 2320.00

Larger pipes & fittings available, including 180 mm - 400 mm

UltraAir System SetupSetting up a UltraAir air system requires 3 simple steps, outlined below

Four factors need to be taken into consideration when selecting pipe size compressed air reticulation.

1.FLOW REQUIRED 2.PRESSURE 3.DISTANCE 4.FUTURE EXPANSION

A pipe size should be selected using the chart that allows for maximum compressor output Free Air Delivery (F.A.D.) at the required operating pressure and allow an additional margin for long distance and future expansion. In practice we recommend a minimum reserve margin of 30%. Larger pipe provides reserve capacity for peak demands.

Electro Fusion Weld Fittings are assembled by hand and an electric current is applied via an Electro Fusion Welder. This makes the installation of large bore pipework extremely quick and simple.

STEP ONE: Select Pipe Size

STEP TWO: Select Fittings

Socket Fusion Weld Fittings are joined quickly and easily using a welding tool and results in a fully fused joint of highest integrity which is leak free, tamper proof and visually pleasing.

Metric Compression Fittingsare joined quickly and easily by hand and offer the advantage of being removable and reusable.

Flow Chart for Pipe over Distance

CFMDistance from Compressor to Furthest Outlet (meters)

20m 30m 50m 100m 150m 200m 300m 400m 500m 1000m 1500m 2000m5 20 20 20 20 20 20 20 20 20 20 20 20

10 20 20 20 20 20 20 20 20 20 20 25 25

15 20 20 20 20 20 20 20 20 25 25 32 32

20 20 20 20 20 20 20 25 25 25 32 32 32

30 20 20 20 20 25 25 25 32 32 32 40 40

40 20 20 20 25 25 32 32 32 32 40 40 40

50 20 20 25 25 32 32 32 32 40 40 50 50

60 20 25 25 32 32 32 40 40 40 50 50 50

70 20 25 25 32 32 32 40 40 40 50 50 50

80 25 25 32 32 32 40 40 40 40 50 50 63

90 25 25 32 32 40 40 40 40 50 50 63 63

100 25 25 32 32 40 40 40 50 50 50 63 63

120 25 32 32 40 40 40 50 50 50 63 63 63

140 32 32 32 40 40 50 50 50 50 63 63 90

160 32 32 40 40 50 50 50 50 63 63 90 90

180 32 32 40 40 50 50 50 63 63 63 90 90

200 32 40 40 50 50 50 63 63 63 90 90 90

300 40 40 50 50 63 63 63 90 90 90 90 90

400 40 50 50 63 63 63 90 90 90 90 110 110

500 50 50 63 63 90 90 90 90 90 110 110 110

600 50 63 63 90 90 90 90 90 90 110 160 160

700 50 63 63 90 90 90 90 110 110 110 160 160

800 63 63 63 90 90 90 110 110 110 160 160 160

900 63 63 90 90 90 90 110 110 110 160 160 160

1000 63 63 90 90 110 110 110 110 110 160 160 160

2000 90 90 110 110 160 160 160 160 160

3000 90 110 110 160 160 160 160

4000 110 110 160 160 160 160

5000 110 160 160 160

10000 160 160

11000 160

12000 160

13000 160

160mm

110mm90mm63mm40mm 50mm32mm25mm20mm

See technical section for conversion factors

- Ideal for long length and underground installations

12 13PIPING & FITTINGS PIPING & FITTINGS

CAPS-NT-Cordina

90° Elbow - Female Adaptor

Product code Size (mm x in) $ PriceEF2015 20 × ½ 9.87

EF2020 20 × ¾ 9.87

EF2515 25 × ½ 10.23

EF2520 25 × ¾ 10.81

EF2525 25 × 1 10.81

EF3220 32 × ¾ 16.47

EF3225 32 × 1 16.47

EF3232 32 × 1¼ 16.47

EF4025 40 × 1 26.20

EF4032 40 × 1¼ 26.20

EF4040 40 × 1½ 26.20

EF4050 40 × 2 26.20

EF5025 50 × 1 37.23

EF5032 50 × 1¼ 37.23

EF5040 50 × 1½ 37.23

EF5050 50 × 2 37.23

EF6332 63 × 1¼ 44.44

EF6340 63 × 1½ 44.44

EF6350 63 × 2 44.44

EF7550 75 × 2 78.74

EF7590 75 × 2½ 78.74

EF7575 75 × 3 78.74

EF9075 90 × 3 126.70

90° Elbow - Male Adaptor

Product code Size (mm x in) $ PriceEM2015 20 × ½ 10.04

EM2020 20 × ¾ 10.04

EM2515 25 × ½ 13.51

EM2520 25 × ¾ 13.51

EM2525 25 × 1 13.51

EM3220 32 × ¾ 19.19

EM3225 32 × 1 19.19

EM3232 32 × 1¼ 19.19

EM4025 40 × 1 33.14

EM4032 40 × 1¼ 33.14

EM4040 40 × 1½ 33.14

EM5025 50 × 1 37.01

EM5032 50 × 1¼ 37.01

EM5040 50 × 1½ 37.01

EM6332 63 × 1¼ 51.11

EM6340 63 × 1½ 51.11

EM6350 63 × 2 51.11

EM9075 90 × 3 86.27

EM1104 110 × 4 180.17

Metric CompressionCoupling

Product code Size (mm) $ PriceC20 20 10.37

C25 25 10.73

C32 32 14.83

C40 40 23.37

C50 50 33.44

C63 63 45.11

C90 90 141.96

C110 110 235.03

Reducing Coupling

Product code Size (mm) $ PriceRC2520 25 × 20 11.49

RC3220 32 × 20 16.03

RC3225 32 × 25 16.03

RC4025 40 × 25 25.09

RC4032 40 × 32 25.09

RC5025 50 × 25 35.94

RC5032 50 × 32 35.94

RC5040 50 × 40 35.94

RC6325 63 × 25 48.34

RC6332 63 × 32 48.34

RC6340 63 × 40 48.34

RC6350 63 × 50 48.34

RC9063 90 × 63 152.14

RC11090 110 × 90 252.49

Valve

Product code Size (mm) $ PriceCV20 20 27.24

CV25 25 28.38

CV32 32 31.64

Wallplate Elbow - Female

Product code Size (mm x in) $ PriceLEF2015 20 × ½ 16.74

LEF2520 25 × ¾ 20.10

Elbow

Product code Size (mm) $ PriceE20 20 14.36

E25 25 14.54

E32 32 19.89

E40 40 32.47

E50 50 42.30

E63 63 57.36

E90 90 149.89

E110 110 235.39

Metric Compression

Did you know?BSP = British Standard Pipe threadNPT = National Pipe Thread (USA)


Female Adaptor

Product code Size (mm x in) $ PriceFA2015 20 × ½ 7.84

FA2020 20 × ¾ 7.84

FA2025 20 × 1 7.84

FA2520 25 × ¾ 9.10

FA2525 25 × 1 9.10

FA3215 32 × ½ 10.89

FA3220 32 × ¾ 10.89

FA3225 32 × 1 10.89

FA3232 32 × 1¼ 15.66

FA4025 40 × 1 15.66

FA4032 40 × 1¼ 15.66

FA4040 40 × 1½ 15.66

FA5032 50 × 1¼ 21.17

FA5040 50 × 1½ 21.17

FA5050 50 × 2 21.17

FA6332 63 × 1¼ 38.84

FA6340 63 × 1½ 38.84

FA6350 63 × 2 38.84

FA9050 90 × 2 104.19

FA9075 90 × 3 104.19

FA9011 90 × 4 104.19

FA1103 110 × 3 194.64

FA1104 110 × 4 194.64

Universal Adaptor - Connects to Steel, PVC, Copper, Aluminium

Product code Size (mm) Pipe Size (mm) $ PriceUA25A 15–22 25 30.39

UA25B 20–27 25 31.96

UA25C 27–35 25 40.80

UA32B 27–35 32 41.76

UA50 35–50 50 106.07

Male Adaptor

Product code Size (mm x in) $ PriceMA2015 20 × ½ 6.53

MA2020 20 × ¾ 6.53

MA2025 20 × 1 6.53

MA2515 25 × ½ 6.86

MA2520 25 × ¾ 6.86

MA2525 25 × 1 6.86

MA3220 32 × ¾ 10.17

MA3225 32 × 1 10.17

MA3232 32 × 1¼ 10.17

MA3240 32 × 1½ 10.17

MA4025 40 × 1 13.96

MA4032 40 × 1¼ 13.96

MA4040 40 × 1½ 13.96

MA4050 40 × 2 13.96

MA5025 50 × 1 21.90

MA5032 50 × 1¼ 21.90

MA5040 50 × 1½ 21.90

MA5050 50 × 2 21.90

MA6332 63 × 1¼ 30.34

MA6340 63 × 1½ 30.34

MA6350 63 × 2 30.34

MA6363 63 × 2½ 30.34

MA9050 90 × 2 103.03

MA9063 90 × 2½ 103.03

MA9075 90 × 3 103.03

MA9004 90 × 4 103.03

MA1102 110 × 2 172.00

MA1103 110 × 3 172.00

MA1104 110 × 4 172.00

End cap

Product code Size (mm) $ PriceEC20 20 6.64

EC25 25 7.19

EC32 32 7.33

EC40 40 14.94

EC50 50 20.26

EC63 63 34.50

EC90 90 103.03

EC110 110 178.39

Metric Compression90° Tee

Product code Size (mm x in) $ PriceT20 20 19.50

T25 25 19.50

T32 32 31.94

T40 40 45.60

T50 50 66.27

T63 63 83.77

T90 90 222.83

T110 110 406.09

90° Tee off–take - Female

Product code Size (mm x in) $ PriceTF2015 20 × ½ 15.71

TF2020 20 × ¾ 15.71

TF2515 25 × ½ 15.71

TF2520 25 × ¾ 15.71

TF2525 25 × 1 15.71

TF3220 32 × ¾ 21.84

TF3225 32 × 1 26.10

TF3232 32 × 1¼ 26.10

TF4025 40 × 1 26.10

TF4032 40 × 1¼ 38.19

TF4040 40 × 1½ 38.19

TF5040 50 × 1½ 55.96

TF5050 50 × 2 55.96

TF6332 63 × 1¼ 68.26

TF6340 63 × 1½ 68.26

TF6350 63 × 2 68.26

TF9080 90 × 3 230.53

TF110100 110 × 4 275.43

Reducing Tee

Product code Size (mm) $ PriceRT2520 25 × 25 × 20 23.66

RT3225 32 × 32 × 25 28.69

RT4025 40 × 40 × 25 47.54

RT4032 40 × 40 × 32 47.54

RT5025 50 × 50 × 25 66.69

RT5032 50 × 50 × 32 66.69

RT5040 50 × 50 × 40 66.69

RT6332 63 × 63 × 32 98.01

RT6340 63 × 63 × 40 98.01

RT6350 63 × 63 × 50 98.01

RT7563 75 × 75 × 63 168.79

90° Tee off–take - Male

Product code Size (mm x in) $ PriceTM2015 20 × ½ 16.50

TM2020 20 × ¾ 16.50

TM2515 25 × ½ 16.11

TM2520 25 × ¾ 16.11

TM3225 32 × 1 26.47

TM4032 40 × 1¼ 34.59

TM4040 40 × 1½ 34.59

TM5032 50 × 1¼ 57.27

TM5040 50 × 1½ 57.27

TM6332 63 × 1¼ 72.71

TM6340 63 × 1½ 72.71

TM6350 63 × 2 72.71

Metric Compression


CAPS-NT-Cordina

Flange Kits E - Table D/E (Gal. Backing Ring / Rubber Gasket / S/F Stub Flange)

Product code Description PCD $ PriceFKE40 40mm Compression Flange Kit Type E 87 145.87

FKE50 50mm Compression Flange Kit Type E 98 170.67

FKE63 63mm Compression Flange Kit Type E 114 285.73

Flange Kits F - Table D/E (Gal. Screwed Flange / Rubber Gasket / Comp. Adaptor)

Product code Description PCD $ PriceFKF20 20mm Compression Stub Flange Kits Type F 67 80.43

FKF25 25mm Compression Stub Flange Kits Type F 73 84.23








Nut Wrench

Product code Size (mm) $ PriceNW 16–40 16–40 24.91

NW1 40–75 40–75 113.86

NW2 63–125 63–125 150.17

Chamfering Tool

Product code Size (mm) $ PriceCHAM 2063 20–63 208.94

CHAM 2063BLD Blade for chamfering tool 91.30

Metric CompressionConnector - Poly to Copper

Product code Size (mm) $ PricePCC2015 20 × 15 16.30

PCC2020 20 × 20 16.30

PCC2515 25 × 15 17.53

PCC2520 25 × 20 18.09

PCC2525 25 × 25 23.63

PCC3220 32 × 20 23.94

PCC3225 32 × 25 26.70

90° Tee Connector - Poly to Copper

Product code Size (mm) $ PricePCT2515 25 × 15 27.76

PCT2520 25 × 20 29.89

PCT2525 25 × 25 30.01

PCT3225 32 × 25 35.69

Black Nut

Product code Size (mm) $ PriceBNPP20 20 1.06

BNPP25 25 1.19

BNPP32 32 1.63

BNPP40 40 2.83

BNPP50 50 3.54

BNPP63 63 8.20

BNPP75 75 22.47

BNPP90 90 37.89

BNPP110 110 61.31

Elbow - Poly to Copper

Product code Size (mm) $ PricePCE2015 20 × 15 20.61

PCE2020 20 × 20 20.61

PCE2515 25 × 15 21.94

PCE2520 25 × 20 22.40

PCE2525 25 × 25 23.84

Poly to Copper Kit

Product code Size (mm) $ PricePCS2015 20 × 15 6.69

PCS2520 25 × 20 8.23

PCS2525 25 × 25 12.34

Reducing Set

Product code Size (mm) $ PriceRS3220 32 × 20 9.44

RS3225 32 × 25 9.44

RS4032 40 × 32 10.34

RS5025 50 × 25 15.50

RS5032 50 × 32 15.50

RS5040 50 × 40 15.50

RS6325 63 × 25 18.53

RS6332 63 × 32 18.53

RS6340 63 × 40 18.53

RS6350 63 × 50 18.53

RS11063 110 × 63 156.63

Metric Compression


Terminal Blocks - Metric Comp. Terminal Blocks - Metric Com.4 Outlet Terminal Block (Spacer Block Included)

Product Code Size $ PriceALTB4P15 1/2” Sicoair 4 Port Terminal Block 61.92

ALTB4P20 3/4” Sicoair 4 Port Terminal Block 61.92

Spacer Blocks

Product Code Size (mm) Suits $ PriceALSP09 9 Terminal Blocks 2.58

Over 9mm

ALSP10 10 Terminal Block 5.16


Manual Condensate Drain

Product Code Size $ PriceMCD08 1/4” Manual Condensate Drain 7.74

Twin Off Take Saddle (Brass Threaded)

Product Code Size (mm x in) $ PriceALTOT25 25-1/2" 36.12

ALTOT32 32-1/2" 36.12

ALTOT40 40-1/2" 41.28

ALTOT50 50-1" 87.76

ALTOT63 63-1" 87.76

4 Outlet Terminal Block - Kit (Terminal, Male Adaptor & Spacer Block)

Product Code Size $ PriceALTB4KP2015 20mm-1/2” Terminal Block Kit x 4 Outlet 73.28

ALTB4KP2515 25mm-1/2” Terminal Block Kit x 4 Outlet 74.83


Ezi-Tee Outlet Saddle - Polypropylene, SS, NBR, 8.5 bar, 55 oC

Product CodeOutside Ø (mm) xFemale Thread

Pipe Outside Ø (mm) $ Price

AS2015 20 × ½” 20 - 22 11.79

AS2515 25 × ½” 25 - 27 13.48

AS2520 25 × ¾” 25 - 27 13.48

AS3215 32 × ½” 32 - 34 15.30

AS3220 32 × ¾” 32 - 34 15.30

AS3225 32 × 1” 32 - 34 15.30

AS4015 40 × ½” 40 - 42 18.15

AS4020 40 × ¾” 40 - 42 18.15

AS4025 40 × 1” 40 - 42 18.15

AS5015 50 × ½” 50 - 52 20.54

AS5020 50 × ¾” 50 - 52 20.32

AS5025 50 × 1” 50 - 52 20.32

AS5032 50 × 1¼” 50 - 52 20.32

AS6315 63 × ½” 63 - 65 26.29

AS6320 63 × ¾” 63 - 65 26.29

AS6325 63 × 1” 63 - 65 26.29

AS6340 63 × 1¼” 63 - 65 26.29

AS9015 90 × ½” 90 - 92 26.29

AS9020 90 × ¾” 90 - 92 38.84

AS9025 90 × 1” 90 - 92 38.84

AS9032 90 × 1¼” 90 - 92 38.84

AS9040 90 × 1½” 90 - 92 38.84

AS9050 90 × 2” 90 - 92 38.84

AS11015 110 × ½” 110 - 112 38.84

AS11020 110 × ¾” 110 - 112 47.62

AS11025 110 × 1” 110 - 112 47.62

AS11032 110 × 1¼” 110 - 112 47.62

AS11040 110 × 1½” 110 - 112 47.62

AS11050 110 × 2” 110 - 112 47.62

Terminal Blocks

9mm (3/8”)

10/13mm (1/2”)

Anti-Condensation Saddle

Access Port For Drilling (Plug After Installation)

Connection For Dropper

Twin Take Off Coupling

44TERMINAL BLOCKS

Terminal Block (Spacer Block Included)

Product Code Size $ PriceALTB1510A 1 x 1/2" Outlet - 3/8" Terminal Block 15.48

ALTB1510B 2 x 1/2 Outlet - 3/8" Terminal Block 15.48

1 / 2 / 3 Outlet Terminal Block (Spacer Block Included)

Product Code Size $ PriceALTB1515A 1/2” Terminal Block x 1 Outlet 29.95

ALTB1515B 1/2” Terminal Block x 2 Outlets 34.95

ALTB1515C 1/2” Terminal Block x 3 Outlets 42.95

1/2” Straight Manifolds / ¼” Straight Manifolds / Circular Manifolds

Product Code Description $ PriceLA2 1/2” Straight Manifold 2x 1/4” Outlets 18.00

LA3 1/2” Straight Manifold 3x 1/4” Outlets 25.00

LA2BR Mounting Bracket to Suit LA2 18.00


¼” Straight Manifolds

SML ¼” Straight Manifold 2 × ¼” Outlets 16.85

SMT ¼” Straight Manifold 3 × ¼” Outlets 21.55

SMM ¼” Straight Manifold 4 × ¼” Outlets 35.75

Circular Manifolds

SMV Manifold SMV - 2 Way 13.43

SMY Manifold SMY - 3 Way 16.43

Inline Terminal Block - Kit (Terminal, Male Adaptor & Spacer Block)

Product Code Size $ PriceALTBINLK2015-1 20mm Inline Terminal Block Kit 3/8” x 1 Outlet 37.16

ALTBINLK2515-1 25mm Inline Terminal Block Kit 3/8” x 1 Outlet 38.71


Product Code Size $ PriceALTBK2015-1-10 20mm-3/8” Terminal Block Kit x 1 Outlet 24.26

ALTBK2515-1-10 25mm-3/8” Terminal Block Kit x 1 Outlet 25.81

1/2”

ALTBK2015-1 20mm-1/2” Terminal Block Kit x 1 Outlet 42.32



Product Code Size $ PriceALTBK2015-2 20mm-1/2” Terminal Block Kit x 2 Outlet 50.06





Terminal Blocks

*1/4” Drain Port can be added by drilling out the existing retaining plug

1/4” Drain Port*

1/2”

3/8”3/8” 1 or 2 x 1/2”

3/8”

LA Series

SMM

SMTSML

SMV

SMY

43 TERMINAL BLOCKS


Product Code Size $ PriceTBC4KP2015 20mm-1/2” Comp. Terminal Block Kit x 4 Outlet 77.97

TBC4KP2515 25mm-1/2” Comp. Terminal Block Kit x 4 Outlet 78.40




Product Code Size $ PriceTBCINLK2015-1 20mm Inline Comp. Terminal Block Kit 3/8” x 1 Outlet 35.20

TBCINLK2515-1 25mm Inline Comp. Terminal Block Kit 3/8” x 1 Outlet 36.07


Product Code Size $ PriceTBCK2015-1-10 20mm-3/8” Comp. Terminal Block Kit x 1 Outlet 27.00

TBCK2515-1-10 25mm-3/8” Comp. Terminal Block Kit x 1 Outlet 27.43

1/2”

TBCK2015-1 20mm-1/2” Comp. Terminal Block Kit x 1 Outlet 45.77



Product Code Size $ PriceTBCK2015-2 20mm-1/2” Comp. Terminal Block Kit x 2 Outlet 53.83



Product Code Size $ PriceTBCK2015-3 20mm-1/2” Comp. Terminal Block Kit x 3 Outlet 61.87


1/2”3/8”

3/8”

See Page 45 For Drilling Tools


Socket Fusion – BlackReducing Tee

Product code Size (mm) $ PriceBWRT2520 25 × 20 × 25 5.65

BWRT3220 32 × 20 × 32 6.88

BWRT3225 32 × 25 × 32 6.88

BWRT4020 40 × 20 × 40 14.20

BWRT4025 40 × 25 × 40 14.20

BWRT4032 40 × 32 × 40 14.20

BWRT5020 50 × 20 × 50 19.76

BWRT5025 50 × 25 × 50 19.76

BWRT5032 50 × 32 × 50 19.76

BWRT5040 50 × 40 × 50 19.76

BWRT6320 63 × 20 × 63 26.88

BWRT6325 63 × 25 × 63 26.88

BWRT6332 63 × 32 × 63 26.88

BWRT6340 63 × 40 × 63 26.88

BWRT6350 63 × 50 × 63 26.88

90 Deg Tee

Product code Size (mm) $ PriceBWT20 20 2.98

BWT25 25 3.24

BWT32 32 4.78

BWT40 40 6.95

BWT50 50 16.06

BWT63 63 21.41

Lugged Elbow Female

Product code Size (mm x in) $ PriceBWLEF2015 20 X ½ 19.50

Reducing Coupling

Product code Size (mm) $ PriceBWRC2520 25 × 20 2.57

BWRC3220 32 × 20 2.98

BWRC3225 32 × 25 2.98

BWRC4020 40 × 20 5.22

BWRC4025 40 × 25 5.22

BWRC4032 40 × 32 5.22

BWRC5020 50 × 20 6.95

BWRC5025 50 × 25 6.95

BWRC5032 50 × 32 6.95

BWRC5040 50 × 40 6.95

BWRC6320 63 × 20 10.43

BWRC6325 63 × 25 10.43

BWRC6332 63 × 32 10.43

BWRC6340 63 × 40 10.43

BWRC6350 63 × 50 10.43

End Caps

Product code Size (mm) $ PriceBWEC20 20 2.52

BWEC25 25 2.93

BWEC32 32 3.34

BWEC40 40 4.75

BWEC50 50 9.03

BWEC63 63 12.35

Coupling

Product code Size (mm) $ PriceBWC20 20 2.66

BWC25 25 2.76

BWC32 32 3.44

BWC40 40 4.80

BWC50 50 9.81

BWC63 63 13.39

BWC90 90 28.50

BWC110 110 51.56

Socket Fusion - BlackThreaded Tee - Female

Product code Size (mm x in) $ PriceBWTF2015 20 × ½ 10.50

BWTF2515 25 × ½ 14.13

BWTF2520 25 × ¾ 14.13

BWTF3215 32 × ½ 18.68

BWTF3220 32 × ¾ 18.68

BWTF3225 32 × 1 18.68

Threaded Elbow - Female

Product code Size (mm x in) $ PriceBWEF2015 20 × ½ 10.50

BWEF2515 25 × ½ 14.13

BWEF2520 25 × ¾ 14.13

BWEF3215 32 × ½ 18.68

BWEF3220 32 × ¾ 18.68

BWEF3225 32 × 1 18.68

90° Elbow

Product code Size (mm) $ PriceBWE20 20 2.47

BWE25 25 2.93

BWE32 32 3.75

BWE40 40 6.82

BWE50 50 11.52

BWE63 63 15.23

Threaded Tee - Male

Product code Size (mm x in) $ PriceBWTM2015 20 × ½ 10.50

BWTM2515 25 × ¾ 14.13

BWTM2520 25 × ½ 14.13

BWTM3215 32 × ½ 18.68

BWTM3220 32 × ¾ 18.68

BWTM3225 32 × 1 18.68

Threaded Elbow - Male

Product code Size (mm x in) $ PriceBWEM2015 20 × ½ 10.50

BWEM2515 25 × ½ 14.13

BWEM2520 25 × ¾ 14.13

BWEM3215 32 × ½ 18.68

BWEM3220 32 × ¾ 18.68

BWEM3225 32 × 1 18.68

45° Elbow

Product code Size (mm) $ PriceBW45E20 20 2.47

BW45E25 25 2.93

BW45E32 32 3.75

BW45E40 40 6.82

BW45E50 50 11.52

BW45E63 63 15.23

High Pressure Fittings Also Available


Flange Kits A - Table D/E (Gal. Backing Ring / Rubber Gasket / S/F Stub Flange)

Product code Description PCD $ PriceFKA40 40mm Socket Fusion Stub Flange Kit Type A 87 86.49

FKA50 50mm Socket Fusion Stub Flange Kit Type A 98 91.86

FKA63 63mm Socket Fusion Stub Flange Kit Type A 114 132.12

Flange Kits B - Table D/E (Kit A + Threaded Flange) & S/F Stub Flange

Product code Description PCD $ PriceFKB40 40mm Socket Fusion Stub Flange Kit Type B 87 93.38

FKB50 50mm Socket Fusion Stub Flange Kit Type B 98 98.78

FKB63 63mm Socket Fusion Stub Flange Kit Type B 114 143.24

Flange Kits G - Table D/E (Gal. Flange / Rubber Gasket / S/F Male Adapter)

Product code Description PCD $ PriceFGF20 20mm Socket Fusion Galvanised Flange Kit Type G 67 71.40

FGF25 25mm Socket Fusion Galvanised Flange Kit Type G 73 75.73





Flange Kits D - Table D/E (Gal. Backing Ring / Rubber Gasket / S/F Stub Flange)

Product code Description PCD $ PriceFKD40 40mm Socket Fusion Stub Flange Kit Type D 87 84.54

FKD50 50mm Socket Fusion Stub Flange Kit Type D 98 88.71

FKD63 63mm Socket Fusion Stub Flange Kit Type D 114 89.64

Stub Flange Adaptor

Product code Size (mm) $ PriceBWSF40 40 9.11

BWSF50 50 9.75

BWSF63 63 12.61

Socket Fusion Socket FusionThreaded Adaptor - Female

Product code Size (mm x in) $ PriceBWFA2015 20 x 1/2 8.82

BWFA2515 25 x 1/2 10.11

BWFA2520 25 x 3/4 10.11

BWFA3215 32 x 1/2 13.50

BWFA3220 32 x 3/4 13.50

BWFA3225 32 x 1 13.50

BWFA4032 40 x 1 1/4 26.24

BWFA5040 50 x 1 1/2 44.84

BWFA6350 63 x 2 63.82

BWFA9075 90 x 3 208.29

Threaded Union - Female

Product code Size (mm x in) $ PriceBWFU2015 20 x 1/2 13.81

BWFU2520 25 x 3/4 16.21

BWFU3225 32 x 1 21.62

BWFU4032 40 x 1 1/4 28.84

BWFU5040 50 x 1 1/2 43.26

BWFU6350 63 x 2 71.62

Ball Valve Double Union

Product code Size (mm) $ PriceBMBV20 20 13.50

BMBV25 25 19.36

BMBV32 32 30.05

BMBV40 40 46.20

BMBV50 50 64.58

BMBV63 63 94.52

Threaded Adaptor - Male

Product code Size (mm x in) $ PriceBWMA2015 20 x 1/2 8.10

BWMA2515 25 x 1/2 13.05

BWMA2520 25 x 3/4 13.05

BWMA3215 32 x 1/2 22.50

BWMA3220 32 x 3/4 22.50

BWMA3225 32 x 1 22.50

BWMA4032 40 x 1 1/4 29.48

BWMA5040 50 x 1 1/2 43.29

BWMA6350 63 x 2 73.00

BWMA9075 90 x 3 225.78

Threaded Union - Male

Product code Size (mm x in) $ PriceBWMU2015 20 x 1/2 13.81

BWMU2520 25 x 3/4 16.21

BWMU3225 32 x 1 28.13

BWMU4032 40 x 1 1/4 36.85

BWMU5040 50 x 1 1/2 54.03

BWMU6350 63 x 2 91.25

See Installation Tools Section for Socket

Fusion Welder


Terminal Blocks - Socket Fusion Terminal Blocks - Socket Fusion4 Outlet Terminal Block (Spacer Block Included)



Spacer Blocks


Over 9mm







ALTOT32 32-1/2" 36.12

ALTOT40 40-1/2" 41.28

ALTOT50 50-1" 87.76

ALTOT63 63-1" 87.76








AS2015 20 × ½” 20 - 22 11.79

AS2515 25 × ½” 25 - 27 13.48

AS2520 25 × ¾” 25 - 27 13.48

AS3215 32 × ½” 32 - 34 15.30

AS3220 32 × ¾” 32 - 34 15.30

AS3225 32 × 1” 32 - 34 15.30

AS4015 40 × ½” 40 - 42 18.15

AS4020 40 × ¾” 40 - 42 18.15

AS4025 40 × 1” 40 - 42 18.15

AS5015 50 × ½” 50 - 52 20.54

AS5020 50 × ¾” 50 - 52 20.32

AS5025 50 × 1” 50 - 52 20.32

AS5032 50 × 1¼” 50 - 52 20.32

AS6315 63 × ½” 63 - 65 26.29

AS6320 63 × ¾” 63 - 65 26.29

AS6325 63 × 1” 63 - 65 26.29

AS6340 63 × 1¼” 63 - 65 26.29

AS9015 90 × ½” 90 - 92 26.29

AS9020 90 × ¾” 90 - 92 38.84

AS9025 90 × 1” 90 - 92 38.84

AS9032 90 × 1¼” 90 - 92 38.84

AS9040 90 × 1½” 90 - 92 38.84

AS9050 90 × 2” 90 - 92 38.84

AS11015 110 × ½” 110 - 112 38.84

AS11020 110 × ¾” 110 - 112 47.62

AS11025 110 × 1” 110 - 112 47.62

AS11032 110 × 1¼” 110 - 112 47.62

AS11040 110 × 1½” 110 - 112 47.62

AS11050 110 × 2” 110 - 112 47.62

Terminal Blocks

9mm (3/8”)

10/13mm (1/2”)





44TERMINAL BLOCKS

















Circular Manifolds









1/2”









Terminal Blocks


1/4” Drain Port*

1/2”

3/8”3/8” 1 or 2 x 1/2”

3/8”

LA Series

SMM

SMTSML

SMV

SMY

43 TERMINAL BLOCKS


Product Code Size $ PriceTBSF4KP2015 20mm-1/2” Socket Fusion 4 Port Terminal Block Kit 73.77

TBSF4KP2515 25mm-1/2” Socket Fusion 4 Port Terminal Block Kit 73.77





Product Code Size $ PriceTBSFINLK2015-1 20mm Inline SF Terminal Block Kit 3/8” x 1 Outlet 26.80

TBSFINLK2515-1 25mm Inline SF Terminal Block Kit 3/8” x 1 Outlet 26.80

TBSFINLK3215-1 32mm Inline SF Terminal Block Kit 3/8” x 1 Outlet 28.80


Product Code Size $ PriceTBSFK2015-1-10 20mm-3/8” Socket Fusion Terminal Block Kit 1 Port 22.80

TBSFK2515-1-10 25mm-3/8” Socket Fusion Terminal Block Kit 1 Port 22.80

TBSFK3215-1-10 32mm-3/8” Socket Fusion Terminal Block Kit 1 Port 23.80

1/2”

TBSFK2015-1 20mm-1/2” Socket Fusion Terminal Block Kit 1 Port 41.57




Product Code Size $ PriceTBSFK2015-2 20mm-1/2” Socket Fusion Terminal Block Kit 2 Port 49.63




Product Code Size $ PriceTBSFK2015-3 20mm-1/2” Socket Fusion Terminal Block Kit 3 Port 57.67



1/2”3/8”

3/8”



CAPS-NT-Cordina

ElectrofusionCoupling

Product code Size (mm) $ PriceEFC20 20 14.29

EFC25 25 14.73

EFC32 32 15.08

EFC40 40 17.33

EFC50 50 22.88

EFC63 63 29.43

EFC75 75 37.92

EFC90 90 47.26

EFC110 110 64.84

EFC125 125 75.49

EFC140 140 105.68

EFC160 160 108.20

Reducing Coupling

Product code Size (mm) $ PriceEFRC2520 25 × 20 17.03

EFRC3220 32 × 20 17.03

EFRC3225 32 × 25 17.03

EFRC4032 40 × 32 40.11

EFRC5032 50 × 32 44.59

EFRC5040 50 × 40 44.59

EFRC6332 63 × 32 44.59

EFRC6340 63 × 40 56.60

EFRC6350 63 × 50 56.60

EFRC9050 90 × 50 85.72

EFRC9063 90 × 63 85.72

EFRC11063 110 × 63 94.10

EFRC11090 110 × 90 129.68

EFRC12590 125 × 90 186.83

EFRC160110 160 × 110 259.05

90° Elbow

Product code Size (mm) $ PriceEFE20 20 29.45

EFE25 25 29.45

EFE32 32 29.45

EFE40 40 40.66

EFE50 50 48.36

EFE63 63 60.45

EFE75 75 76.93

EFE90 90 93.42

EFE110 110 134.08

EFE125 125 175.84

EFE160 160 285.74

45° Elbow

Product code Size (mm) $ PriceEF45E32 32 33.52

EF45E40 40 40.66

EF45E50 50 48.36

EF45E63 63 60.45

EF45E75 75 85.46

EF45E90 90 88.30

EF45E110 110 126.76

EF45E125 125 187.27

EF45E160 160 202.72

ElectrofusionEqual Tee

Product code Size (mm) $ PriceEFE20 20 29.45

EFE25 25 29.45

EFE32 32 29.45

EFE40 40 40.66

EFE50 50 48.36

EFE63 63 60.45

EFE75 75 76.93

EFE90 90 93.42

EFE110 110 134.08

EFE125 125 175.84

EFE160 160 285.74

Reducing Tee

Product code Size (mm) $ PriceEFRT2520 25 × 20 30.77

EFRT2532 25 × 32 30.77

EFRT3220 32 × 20 47.45

EFRT4020 40 × 20 55.55

EFRT5020 50 × 20 72.97

EFRT5032 50 × 32 72.97

EFRT6320 63 × 20 75.49

EFRT6332 63 × 32 75.49

EFRT6340 63 × 40 56.62

EFRT6350 63 × 50 56.62

EFRT9063 90 × 63 130.85

EFRT11063 110 × 63 161.04

EFRT11090 110 × 90 161.04

EFRT12590 125 × 90 214.67

EFRT125110 125 × 110 214.67

EFRT16090 160 × 90 297.92

EFRT160110 160 × 110 297.92

EFRT160125 160 × 125 297.92


Electrofusion90° Elbow Union - Female

Product code Size (mm x in) $ PriceEFEFU2015 20 × ½ 61.73

EFEFU2520 25 × ¾ 62.98

EFEFU3225 32 × 1 65.74

EFEFU4032 40 × 1¼ 90.12

EFEFU5040 50 × 1½ 118.62

EFEFU6350 63 × 2 129.12

45° Transition Elbow - Female

Product code Size (mm x in) $ PriceEF45EF3215 32 × ½ 59.78

EF45EF3220 32 × ¾ 59.78

EF45EF3225 32 × 1 59.78

EF45EF4032 40 × 1¼ 82.00

EF45EF5040 50 × 1½ 94.20

EF45EF6350 63 × 2 117.49

EF45EF9075 90 × 3 404.82

90° Elbow Transition - Female

Product code Size (mm x in) $ PriceEFEF2015 20 × ½ 63.73

EFEF2515 25 × ½ 64.01

EFEF2520 25 × ¾ 64.01

EFEF3225 32 × ½ 77.06

EFEF3215 32 × ¾ 77.06

EFEF3220 32 × 1 77.06

EFEF4032 40 × 1¼ 103.77

EFEF5040 50 × 1½ 118.08

EFEF6350 63 × 2 156.93

EFEF9075 90 × 3 435.00

90° Elbow Union - Male

Product code Size (mm x in) $ PriceEFEMU2015 20 × ½ 61.73

EFEMU2520 25 × ¾ 62.98

EFEMU3225 32 × 1 65.74

EFEMU4032 40 × 1¼ 90.12

EFEMU5040 50 × 1½ 118.62

EFEMU6350 63 × 2 129.12

45° Transition Elbow - Male

Product code Size (mm x in) $ PriceEF45EM3215 32 × ½ 65.70

EF45EM3220 32 × ¾ 65.70

EF45EM3225 32 × 1 65.70

EF45EM4032 40 × 1¼ 90.12

EF45EM5040 50 × 1½ 103.53

EF45EM6350 63 × 2 129.12

EF45EM9075 90 × 3 363.30

90° Elbow Transition - Male

Product code Size (mm x in) $ PriceEFEM2015 20 × ½ 62.71

EFEM2515 25 × ½ 62.98

EFEM2520 25 × ¾ 62.98

EFEM3215 32 × ½ 65.70

EFEM3220 32 × ¾ 65.70

EFEM3225 32 × 1 65.70

EFEM3232 32 × 1¼ 71.63

EFEM3240 32 × 1½ 75.69

EFEM4032 40 × 1¼ 90.12

EFEM5040 50 × 1½ 103.53

EFEM6350 63 × 2 129.12

EFEM9075 90 × 3 368.25

EFEM1104 110 × 4 471.50

ElectrofusionTransition Coupling - Female

Product code Size (mm x in) $ PriceEFFA2015 20 × ½ 44.16

EFFA2515 25 × ½ 44.86

EFFA2520 25 × ¾ 44.86

EFFA3215 32 × ½ 53.59

EFFA3220 32 × ¾ 57.64

EFFA3225 32 × 1 44.86

EFFA4032 40 × 1¼ 73.60

EFFA5040 50 × 1½ 84.64

EFFA6350 63 × 2 107.97

EFFA9075 90 × 3 363.77

Union Coupling - Female

Product code Size (mm x in) $ PriceEFCFU2015 20 × ½ 58.08

EFCFU2520 25 × ¾ 58.96

EFCFU3225 32 × 1 61.91

EFCFU4032 40 × 1¼ 71.98

EFCFU5040 50 × 1½ 90.55

EFCFU6350 63 × 2 120.58

90° Compact Elbow Transition - Female

Product code Size (mm x in) $ PriceEFSPEF2015 20 × ½ 72.66

EFSPEF2515 25 × ½ 73.97

EFSPEF2520 25 × ¾ 74.17

EFSPEF3215 32 × ½ 78.84

EFSPEF3220 32 × ¾ 79.23

EFSPEF3225 32 × 1 81.61

Transition Coupling - Male

Product code Size (mm x in) $ PriceEFMA2015 20 × ½ 29.87

EFMA2520 25 × ¾ 30.13

EFMA3215 32 × ½ 42.56

EFMA3220 32 × ¾ 42.56

EFMA3225 32 × 1 42.56

EFMA4032 40 × 1¼ 59.41

EFMA5040 50 × 1½ 61.76

EFMA6350 63 × 2 78.53

EFMA6350 63 × 2 107.97

EFMA9075 90 × 3 322.26

EFMA1104 110 × 4 402.34

Union Coupling - Male

Product code Size (mm x in) $ PriceEFCMU2015 20 × ½ 58.08

EFCMU2520 25 × ¾ 58.96

EFCMU3225 32 × 1 61.91

EFCMU4032 40 × 1¼ 71.98

EFCMU5040 50 × 1½ 90.55

EFCMU6350 63 × 2 120.58

90° Compact Elbow Transition - Male

Product code Size (mm x in) $ PriceEFSPEM2015 20 × ½ 73.05

EFSPEM2515 25 × ½ 74.17

EFSPEM2520 25 × ¾ 74.96

EFSPEM3215 32 × ½ 79.23

EFSPEM3220 32 × ¾ 79.63

EFSPEM3225 32 × 1 83.19


ElectrofusionEnd Cap

Product code Size (mm) $ PriceEFEC20 20 24.25

EFEC25 25 24.25

EFEC32 32 23.78

EFEC40 40 27.64

EFEC50 50 35.82

EFEC63 63 43.69

EFEC75 75 64.60

EFEC90 90 71.16

EFEC110 110 96.28

EFEC125 125 117.76

EFEC160 160 153.13

End Plug

Product code Size (mm) $ PriceEFEP20 20 6.37

EFEP25 25 8.02

EFEP32 32 13.48

EFEP40 40 14.70

EFEP50 50 17.18

EFEP63 63 22.10

EFEP75 75 24.53

EFEP90 90 29.45

EFEP110 110 39.23

EFEP125 125 55.20

EFEP140 140 67.47

EFEP160 160 79.73

Spigot Ball Valve - Brass Body Double Union

Product code Size (mm) $ PriceSPBV20 20 107.23

SPBV25 25 107.59

SPBV32 32 118.16

SPBV40 40 151.54

SPBV50 50 168.60

SPBV63 63 185.36

Long Spigot Reducer - PE100 SDR11 PN16

Product code Size (mm) $ PriceEFSPR3225 32 × 25 9.95

EFSPR4020 40 × 20 19.95

EFSPR4025 40 × 25 19.95

EFSPR4032 40 × 32 19.95

EFSPR5020 50 × 20 21.25

EFSPR5025 50 × 25 21.25

EFSPR5032 50 × 32 21.25

EFSPR5040 50 × 40 21.25

EFSPR6325 63 × 25 22.50

EFSPR6332 63 × 32 22.50

EFSPR6340 63 × 40 22.50

EFSPR6350 63 × 50 22.50

EFSPR7540 75 × 40 28.85

EFSPR7550 75 × 50 28.85

EFSPR7563 75 × 63 28.85

EFSPR9032 90 × 32 39.56

EFSPR9040 90 × 40 39.56

EFSPR9050 90 × 50 40.40

EFSPR9063 90 × 63 40.40

EFSPR9075 90 × 75 40.69

EFSPR11063 110 × 63 54.34

EFSPR11075 110 × 75 54.34

EFSPR11090 110 × 90 54.34

EFSPR12590 125 × 90 65.28

EFSPR125110 125 × 110 65.46

EFSPR16032 160 × 32 125.43

EFSPR16063 160 × 63 125.43

EFSPR16075 160 × 75 125.43

EFSPR16090 160 × 90 125.43

EFSPR160110 160 × 110 125.81

Spigot Male PE / Steel - Transition Adaptor (Electro–Plated Steel)

Product code Size (mm x in) $ PriceEFTRMA3225 32 x 1 120.63

EFTRMA4032 40 x 1¼ 134.54

EFTRMA5040 50 x 1½ 146.80

EFTRMA6350 63 x 2 163.17

ElectrofusionSpigot Adaptor - Female (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPFA2015 20 × ½ 29.87

SPFA2515 25 × ½ 30.13

SPFA2520 25 × ¾ 30.13

SPFA3215 32 × ½ 42.56

SPFA3220 32 × ¾ 42.56

SPFA3225 32 × 1 42.56

SPFA4032 40 × 1¼ 56.27

SPFA5040 50 × 1½ 61.84

SPFA6350 63 × 2 86.19

SPFA9075 90 × 3 316.51

Spigot Union Adaptor - Female (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPFUA2015 20 × ½ 34.20

SPFUA2520 25 × ¾ 37.58

SPFUA3225 32 × 1 39.89

SPFUA4032 40 × 1¼ 57.55

SPFUA5040 50 × 1½ 70.26

SPFUA6350 63 × 2 114.97

Spigot Female Elbow - Threaded (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPEF2015 20 × ½ 41.32

SPEF2515 25 × ½ 42.63

SPEF2520 25 × ¾ 42.83

SPEF3215 32 × ½ 47.50

SPEF3220 32 × ¾ 47.90

SPEF3225 32 × 1 50.27

Spigot Adaptor - Male (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPMA2015 20 × ½ 31.36

SPMA2515 25 × ½ 31.64

SPMA2520 25 × ¾ 31.64

SPMA3215 32 × ½ 44.69

SPMA3220 32 × ¾ 44.69

SPMA3225 32 × 1 44.69

SPMA4032 40 × 1¼ 59.08

SPMA5040 50 × 1½ 64.93

SPMA6350 63 × 2 90.50

SPMA9075 90 × 3 275.25

SPMA1104 110 × 4 337.50

Spigot Union Adaptor - Male (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPMUA2015 20 × ½ 37.62

SPMUA2520 25 × ¾ 41.34

SPMUA3225 32 × 1 43.87

SPMUA4032 40 × 1¼ 57.83

SPMUA5040 50 × 1½ 77.28

SPMUA6350 63 × 2 126.46

Spigot Male Elbow - Threaded (Nickel Plated Brass)

Product code Size (mm x in) $ PriceSPEM2015 20 × ½ 41.72

SPEM2515 25 × ½ 42.83

SPEM2520 25 × ¾ 43.62

SPEM3215 32 × ½ 47.90

SPEM3220 32 × ¾ 48.30

SPEM3225 32 × 1 51.86


CAPS-NT-Cordina

Electrofusion ElectrofusionTapping Saddle

Product code Size (mm ) $ PriceEFASP4020 40 × 20 73.60

EFASP4032 40 × 32 73.60

EFASP5020 50 × 20 73.60

EFASP5032 50 × 32 73.60

EFASP6320 63 × 20 81.78

EFASP6332 63 × 20 81.78

EFASP6340 63 × 40 139.42

EFASP6350 63 × 50 139.57

EFASP6363 63 × 63 139.57

EFASP7520 75 × 20 141.46

EFASP7532 75 × 32 141.46

EFASP7540 75 × 40 141.46

EFASP7550 75 × 50 141.46

EFASP7563 75 × 63 141.46

EFASP9020 90 × 20 141.46

EFASP9032 90 × 32 141.46

EFASP9040 90 × 40 141.46

EFASP9050 90 × 50 141.46

EFASP9063 90 × 63 141.46

EFASP11020 110 × 20 145.98

EFASP11032 110 × 32 145.98

EFASP11040 110 × 40 145.98

EFASP11050 110 × 50 145.98

EFASP11063 110 × 63 145.98

EFASP12520 125 × 20 150.07

EFASP12532 125 × 32 150.07

EFASP12540 125 × 40 150.07

EFASP12550 125 × 50 150.07

EFASP12563 125 × 63 150.07

EFASP14020 140 × 20 150.07

EFASP14032 140 × 32 150.07

EFASP14040 140 × 40 150.07

EFASP14050 140 × 50 150.07

EFASP14063 140 × 63 150.07

EFASP16020 160 × 20 152.51

EFASP16032 160 × 32 152.51

EFASP16040 160 × 40 152.51

EFASP16050 160 × 50 152.51

EFASP16063 160 × 63 152.51

Ideal for under pressure hot tapping connections

Repair Saddle

Product code Size (mm) $ PriceEFRSAD90 90 83.52

EFRSAD110 110 89.95

EFRSAD160 160 116.20

Branch Saddle

Product code Size (mm) $ PriceEFBS6332 63 × 32 74.70

EFBS6340 63 × 40 74.70

EFBS6350 63 × 50 74.70

EFBS6363 63 × 63 74.70

EFBS7532 75 × 32 74.70

EFBS7540 75 × 40 74.70

EFBS7550 75 × 50 74.70

EFBS7563 75 × 63 74.70

EFBS9032 90 × 32 82.57

EFBS9040 90 × 40 82.57

EFBS9050 90 × 50 82.57

EFBS9063 90 × 63 82.57

EFBS9090 90 × 90 121.63

EFBS11032 110 × 32 125.50

EFBS11040 110 × 40 125.50

EFBS11050 110 × 50 125.50

EFBS11063 110 × 63 125.50

EFBS11090 110 × 90 129.75

EFBS16032 160 × 32 165.50

EFBS16040 160 × 40 165.50

EFBS16050 160 × 50 165.50

EFBS16063 160 × 63 165.50

EFBS16090 160 × 90 172.99

Flange Kits H - Table D/E (Gal Mal Flange Drilled / Rubber Gasket / Spigot Male Ad.)

Product code Description PCD $ PriceFKH20 20mm Spigot Galvanised Flange Kit Type H 67 103.77

FKH25 25mm Spigot Galvanised Flange Kit Type H 73 117.40









Terminal Blocks - Spigot Fittings Terminal Blocks - Spigot Fittings4 Outlet Terminal Block (Spacer Block Included)



Spacer Blocks


Over 9mm







ALTOT32 32-1/2" 36.12

ALTOT40 40-1/2" 41.28

ALTOT50 50-1" 87.76

ALTOT63 63-1" 87.76








AS2015 20 × ½” 20 - 22 11.79

AS2515 25 × ½” 25 - 27 13.48

AS2520 25 × ¾” 25 - 27 13.48

AS3215 32 × ½” 32 - 34 15.30

AS3220 32 × ¾” 32 - 34 15.30

AS3225 32 × 1” 32 - 34 15.30

AS4015 40 × ½” 40 - 42 18.15

AS4020 40 × ¾” 40 - 42 18.15

AS4025 40 × 1” 40 - 42 18.15

AS5015 50 × ½” 50 - 52 20.54

AS5020 50 × ¾” 50 - 52 20.32

AS5025 50 × 1” 50 - 52 20.32

AS5032 50 × 1¼” 50 - 52 20.32

AS6315 63 × ½” 63 - 65 26.29

AS6320 63 × ¾” 63 - 65 26.29

AS6325 63 × 1” 63 - 65 26.29

AS6340 63 × 1¼” 63 - 65 26.29

AS9015 90 × ½” 90 - 92 26.29

AS9020 90 × ¾” 90 - 92 38.84

AS9025 90 × 1” 90 - 92 38.84

AS9032 90 × 1¼” 90 - 92 38.84

AS9040 90 × 1½” 90 - 92 38.84

AS9050 90 × 2” 90 - 92 38.84

AS11015 110 × ½” 110 - 112 38.84

AS11020 110 × ¾” 110 - 112 47.62

AS11025 110 × 1” 110 - 112 47.62

AS11032 110 × 1¼” 110 - 112 47.62

AS11040 110 × 1½” 110 - 112 47.62

AS11050 110 × 2” 110 - 112 47.62

Terminal Blocks

9mm (3/8”)

10/13mm (1/2”)





44TERMINAL BLOCKS

















Circular Manifolds









1/2”









Terminal Blocks


1/4” Drain Port*

1/2”

3/8”3/8” 1 or 2 x 1/2”

3/8”

LA Series

SMM

SMTSML

SMV

SMY

43 TERMINAL BLOCKS


Product Code Size $ PriceTBSP4KP2015 20mm-1/2” Spigot Terminal Block Kit x 4 Outlet 103.77

TBSP4KP2515 25mm-1/2” Spigot Terminal Block Kit x 4 Outlet 116.43

TBSP4KP2520 25mm-3/4” Spigot Terminal Block Kit x 4 Outlet 116.43


Product Code Size $ PriceTBSPINLK2015-1 20mm Inline Spigot Terminal Block Kit 3/8” x 1 Outlet 86.80

TBSPINLK2515-1 25mm Inline Spigot Terminal Block Kit 3/8” x 1 Outlet 112.13


Product Code Size $ PriceTBSPK2015-1-10 20mm-3/8” Spigot Terminal Block Kit x 1 Outlet 52.80

TBSPK2515-1-10 25mm-3/8” Spigot Terminal Block Kit x 1 Outlet 65.47

1/2”

TBSPK2015-1 20mm-1/2” Spigot Terminal Block Kit x 1 Outlet 71.57



Product Code Size $ PriceTBSPK2015-2 20mm-1/2” Spigot Terminal Block Kit x 2 Outlet 79.63



Product Code Size $ PriceTBSPK2015-3 20mm-1/2” Spigot Terminal Block Kit x 3 Outlet 87.67


1/2”3/8”

3/8”



CAPS-NT-Cordina

Stub Flange Adaptor

Product code Size (mm) $ PriceEFSTF20 20 8.80

EFSTF25 25 9.11

EFSTF32 32 10.81

EFSTF40 40 12.84

EFSTF50 50 15.63

EFSTF63 63 19.65

EFSTF75 75 21.42

EFSTF90 90 21.42

EFSTF110 110 30.94

EFSTF125 125 35.70

EFSTF160 160 71.38

Please Note: Spigot stub fl ange, used with electrofusion or socket fusion applications.

Backing Ring / Flange Galvanised (Stainless Steel Available)

Product code Size (mm)

$ Price

Table D Table E ANSIBR20 20 14.62 14.62 14.62

BR25 25 14.62 14.62 14.62

BR32 32 14.62 14.62 14.62

BR40 40 15.76 15.76 15.76

BR50 50 15.76 15.76 15.76

BR63 63 15.76 15.76 15.76

BR75 75 20.32 20.32 20.32

BR90 90 21.12 21.12 21.12

BR110 110 29.12 29.12 29.12

BR125 125 57.55 57.55 57.55

BR140 140 57.55 57.55 57.55

BR160 160 60.80 60.80 60.80

Flange Kits C - Table D/E (Gal. Backing Ring / Rubber Gasket / S/F Stub Flange)

Product code Description PCD $ PriceFKC20 20mm Spigot Fusion Stub Flange Kit Type C 67 81.07

FKC25 25mm Spigot Fusion Stub Flange Kit Type C 73 81.80










Please Note: Spigot stub fl ange, used with electrofusion or socket fusion applications.

Backing Ring - Nylon Coated - Table D/E

Product code Size (mm) PCD $ PriceNYLBR25 25 73 30.10

NYLBR32 32 83 32.26

NYLBR40 40 87 39.78

NYLBR50 50 98 51.61

NYLBR63 63 114 64.51

NYLBR75 75 127 83.86

NYLBR90 90 146 86.01

NYLBR110 110 178 101.07

NYLBR125 125 210 120.42

NYLBR160 160 235 161.28

Stub Flange Components

39 STUB FLANGE COMPONENTS

Rubber Insertion Gasket - Table D/E

Product Code Size (in) PCD $ PriceWFG20 1/2 67 8.93

WFG25 3/4 73 9.57

WFG32 1 83 11.80

WFG40 1.1/4 87 15.31

WFG50 1.1/2 98 19.14

WFG63 2 114 24.88

WFG75 2.1/2 127 25.52

WFG90 3 146 29.98

WFG110 4 178 35.72

WFG125 5 210 47.85

WFG140 6 235 60.60

WFG160 8 292 76.55

Galvanised Drilled Flange Table D/E (Stainless Steel Available)

Product Code Size (in) PCD $ PriceGFDD15 1/2 67 39.10

GFDD20 3/4 73 54.17

GFDD25 1 83 63.23

GFDD32 1.1/4 87 90.27

GFDD40 1.1/2 98 105.27

GFDD50 2 114 127.90

GFDD65 2.1/2 127 216.97

GFDD80 3 146 279.03

GFDD94 4 178 426.27

GFDD96 6 235 774.90

Stub Flange Components

40STUB FLANGE COMPONENTS 38 39PIPING & FITTINGS PIPING & FITTINGS

Butterfl y Valve (Lugged Table E316 Stainless Steel Wafer)

Product Code Size (mm x in) Suits PCD $ PriceBVLUG50 50-2" Flange Kit FLGKA63 114 256.80

BVLUG65 65-2 1/2" - 127 294.00

BVLUG80 80-3" Flange Kit FLGKA90 146 329.30

BVLUG100 100-4" Flange Adaptor ALFLA110 178 384.20



Butterfl y Valve (No Lug Wafer E316 Stainless Steel)

Product Code Size (mm x in) Suits PCD $ PriceBVWFS50 50-2" Flange Kit FLGKA63 114 198.00

BVWFS65 65-2 1/2" - 127 217.60

BVWFS80 80-3" Flange Kit FLGKA90 146 249.00

BVWFS100 100-4" Flange Adaptor ALFLA110 178 313.60



Axial Valve (Normally Closed FKM Seals)

Product Code Size (in) $ PriceAV10 3/8" 297.30

AV15 1/2" 327.60

AV20 3/4" 376.40

AV25 1" 428.50

AV32 1 1/4" 501.10

AV40 1 1/2" 628.70

AV50 2” 790.00

Air Pilot Operated. Ideal for high level or remote valve operation.

Flexi Hose (500mm Length) - Not for Compressor Connections

Product Code Size (in) $ PriceFLEX15500 1/2" 31.73

FLEX20500 3/4" 51.60

FLEX25500 1" 78.72

FLEX32500 1 1/4" 170.32

FLEX45500 1 1/2" 245.16

FLEX50500 2” 369.04

Flexi Hose (1500mm Length) - Not for Compressor Connections

Product Code Size (in) $ PriceFLEX151500 1/2" 51.60

FLEX201500 3/4" 90.32

FLEX251500 1" 134.20

FLEX321500 1 1/4" 278.72

FLEX451500 1 1/2" 412.88

FLEX501500 2” 593.56

Valves & Flanges

48 VALVES & FLANGES

Bolt Sets

Additional sizes available to order including 180mm - 630mm.

Additional sizes available to order including 180mm - 630mm.

Bolt Set - PE to Steel Flange Connection - Table D

PE Flange SizeSteel Flange

(mm)Inch Size Hole Pattern

Max Flange Thickness

Hole Size x Number

Product Code Galvanized 4.6 M/S

$ PriceProduct Code 316

Stainless Steel$ Price

20 15 1/2" Table D/E 7.2 14 x 4 BSTDE20 $39.47 BSTDESS20 $138.40


32 25 1" Table D/E 8.7 14 x 4 BSTDE32 $39.47 BSTDESS32 $138.40

40 32 1.1/4" Table D/E 8.7 14 x 4 BSTDE40 $34.27 BSTDESS40 $138.40


63 50 2” Table D/E 10.3 18 x 4 BSTDE63 $136.13 BSTDESS63 $313.07

75 65 2.1/2” Table D/E 11.1 18 x 4 BSTDE75 $136.13 BSTDESS75 $313.07


110 100 4” Table D 13 18 x 4 BSTDE110 $154.13 BSTDESS110 $379.49




Bolt Set - PE to Steel Flange Connection - Table E




Hole Size x Number






32 25 1" Table D/E 8.7 14 x 4 BSTDE32 $39.47 BSTDESS32 $138.40




75 65 2.1/2” Table D/E 11.1 18 x 4 BSTDE75 $136.13 BSTDESS75 $313.07


110 100 4” Table E 38 18 x 8 BSTE110 $154.13 BSTESS110 $379.49




Bolt Set - PE to Steel Flange Connection - ANSI 150




Hole Size x Number




20 15 1/2" ANSI 150 10.2 16 x 4 BSANSI20 $39.47 BSANSISS20 $138.40

25 20 3/4" ANSI 150 12.8 16 x 4 BSANSI25 $39.47 BSANSISS25 $138.40

32 25 1" ANSI 150 14.2 16 x 4 BSANSI32 $39.47 BSANSISS32 $138.40

40 32 1.1/4" ANSI 150 15.7 16 x 4 BSANSI40 $34.27 BSANSISS40 $138.40

50 40 1.1/2" ANSI 150 17.5 16 x 4 BSANSI50 $34.27 BSANSISS50 $138.40

63 50 2” ANSI 150 16 20 x 4 BSANSI63 $136.13 BSANSISS63 $313.07

75 65 2.1/2” ANSI 150 22 20 x 4 BSANSI75 $136.13 BSANSISS75 $313.07






43 STUB FLANGE COMPONENTS

Valves & Flanges


Installation Tools

Welding Clamps

Product code Description & Size (mm) $ PriceEFCLAMP1632 16x20mm Straight Positioning Clamp 365.02

EFCLAMP2032 25x32mm Straight Positioning Clamp 295.42

EFCLAMP2532 20x32mm Straight Positioning Clamp 295.42

Multi Size

EFCLAMP2063 20-63mm Straight Multi Size Positioning Clamp 476.53

EFCLAMP63125 63-125mm Straight Multi Size Positioning Clamp 1,529.16

EFCLAMP160200 160-200mm Straight Multi Size Positioning Clamp 3,562.80

Universal

EFCLAMPUNIA2063 20-63mm Universal Straight & Elbow Couplings 612.08

EFCLAMPUNIB2063 20-63mm Universal 2 Way With Angle Maker Base 659.78

EFCLAMPUNIC2063 20-63mm Universal 3 Way With Angle Maker Base 1,060.89

EFCLAMPUNIA63180 63-180mm Universal 2 Way With Straight Base 1,343.45

EFCLAMPUNIB63180 63-180mm Universal 3 Way With Angle Base 2,494.01

Pipe Cutters

Product code Size (mm) $ PriceKM012 20–32 15.23

KM001 20–40 16.65

KM014 20–63 88.24

Rotational Pipe Cutter

Product code Size (mm) $ PriceTC2QP 20–63 282.00

TC4QP 48–114 382.00

Installation Tools

HDPE Butt Fusion Machine

Product code Size (mm) $ PriceKL201 63–160 POA

KL202 110–250 POA

KL203 160–315 POA

KL204 250–450 POA

Socket Fusion Bench Welder

Product code Size (mm) $ PriceKM003 50–110 POA

Electrofusion Welder

Product code Description $ Price

ULTRAFUSE65Welds electrofusion fittings up to 630mm (10 to 3500

seconds) in both Fusamatic and Manual modes.4,200.00

Socket Fusion Welder (Automatic Temperature)

Product code Size (mm) $ PriceKL001 20–32 250.00

KL002 20–63 400.00

KL003 75–110 495.00

Socket Fusion Welder Spare Dies

Product code Size (mm) $ PriceKY001 20 15.30

KY002 25 17.80

KY003 32 20.40

KY004 40 28.00

KY005 50 33.10

KY006 63 38.20

Installation ToolsDeburring Cone (Up To Ø50) - Inner | Outer

Product Code Size (mm) $ PriceDEBURRCONE 10 - 50 42.92

Leak Detector Spray 750ml

Product Code Description $ PriceLDSPRAY750 Ultramax Leak Detector Spray 26.85

Tube Cutter

Product Code Size (mm) $ PriceTC1540 15-40 (Includes Deburrer) 287.24

TC2063 20-63 (Includes Deburrer) 287.24

TC2090 20-90 367.47

TC50110 50-110 453.08

TC100160 100-160 649.36

Adjustable Reamer Suitable for Large Bore Pipes

Product Code Description $ PriceTBEV1 Pipe Reamer TBEV - Size 50 - 63mm 495.23

TBEV2 Pipe Reamer TBEV - Size 63 - 200mm 1,145.00

TBEVBL Replacement Blade for TBEV 192.50

Deburring Tool

Product Code Description $ PriceDEBURRTOOL Deburring Tool 29.50

Silicone Spray 300g

Product Code Description $ PriceALLUB300 Ultramax Silicone Spray 300g 28.88

Exact Cut Machine

Product Code Description $ Price

EXACTCUT17015mm - 170mm Pipe Cutter 230V, 4 X rollers

Carry Bag, Instruction Manual, Blade (in machine)2 X Allen Keys

3,347.06

Locking Spanner Coupling Ring / Fittings-Body

Product Code Description $ PriceLSC20 20mm Locking Spanner Coupling Ring 25.81

LSC25 25mm Locking Spanner Coupling Ring 25.81





Fittings-Body

LSF20 20mm Locking Spanner Fittings-Body 25.81





LSF63 63mm Locking Spanner Fittings-Body 38.71Get in touch: 08 9458 4477

29PIPING & FITTINGS

Installation ToolsDeburring Cone (Up To Ø50) - Inner | Outer

Product Code Size (mm) $ PriceDEBURRCONE 10 - 50 42.92

Leak Detector Spray 750ml

Product Code Description $ PriceLDSPRAY750 Ultramax Leak Detector Spray 26.85

Tube Cutter

Product Code Size (mm) $ PriceTC1540 15-40 (Includes Deburrer) 287.24

TC2063 20-63 (Includes Deburrer) 287.24

TC2090 20-90 367.47

TC50110 50-110 453.08

TC100160 100-160 649.36

Adjustable Reamer Suitable for Large Bore Pipes

Product Code Description $ PriceTBEV1 Pipe Reamer TBEV - Size 50 - 63mm 495.23

TBEV2 Pipe Reamer TBEV - Size 63 - 200mm 1,145.00

TBEVBL Replacement Blade for TBEV 192.50

Deburring Tool

Product Code Description $ PriceDEBURRTOOL Deburring Tool 29.50

Silicone Spray 300g

Product Code Description $ PriceALLUB300 Ultramax Silicone Spray 300g 28.88

Exact Cut Machine


EXACTCUT17015mm - 170mm Pipe Cutter 230V, 4 X rollers

Carry Bag, Instruction Manual, Blade (in machine)2 X Allen Keys

3,347.06

Locking Spanner Coupling Ring / Fittings-Body

Product Code Description $ PriceLSC20 20mm Locking Spanner Coupling Ring 25.81






Fittings-Body






LSF63 63mm Locking Spanner Fittings-Body 38.71Get in touch: 08 9458 4477

29PIPING & FITTINGS

Straight Mult Size

Universal


Installation ToolsInstallation ToolsHot Tap Pressurized Drilling Tool

Product Code Size (in) $ PricePDT15 1/2" 619.35

PDT25 1” 774.19

Tube Pipe Drilling Bush

Product Code Size (in x mm) $ PriceDRILLB15 1/2" x 10 24.90

DRILLB20 3/4" x 14 32.89

DRILLB25 1" x 19 48.68

DRILLB32 1 1/4" x 25 62.89

DRILLB40 1 1/2" x 35 70.00

DRILLB50 2” x 44 101.84

For use with Off Take Saddles. Choose tube hole cutter to suit your drill bush.

Tube Drilling Kit - Bush & Tube Hole Cutter (Excludes Mandrel)

Product Code Description $ PriceDRILLKIT15 1/2" Drilling Bush with Tube Hole Drill (10mm) 58.58

DRILLKIT20 3/4" Drilling Bush with Tube Hole Cutter (14mm) 87.03

DRILLKIT25 1" Drilling Bush with Tube Hole Cutter (19mm) 102.82

DRILLKIT32 1 1/4" Drilling Bush with Tube Hole Cutter (25mm) 123.11

DRILLKIT40 1 1/2" Drilling Bush with Tube Hole Cutter (35mm) 133.11

DRILLKIT50 2” Drilling Bush with Tube Hole Cutter (44mm) 169.58

Tube Cutter Kit (Includes Bushes & Mandrels)

THCKIT Tube Hole Cutter Kit (10-44mm) 14 piece 892.79

Tube Hole Cutter Mandrel

Product Code Description $ PriceCM1430 Cutter Mandrel (14-30mm) 45.16

CM32152 Cutter Mandrel (32-152mm) 110.53

Tube Hole Cutter

Product Code Description $ PriceTHC15 1/2" Tube Hole Drill (10mm) 33.58

THC20 3/4" Tube Hole Cutter (14mm) 54.13

THC25 1" Tube Hole Cutter (19mm) 54.13

THC32 1 1/4" Tube Hole Cutter (25mm) 60.21

THC40 1 1/2" Tube Hole Cutter (35mm) 63.11

THC50 2” Tube Hole Cutter (44mm) 67.74

Tube Installation Tool Kit (Tube Cutter, Drilling Bush, Hole Cutter, Mandrel, etc)

Product Code Description $ PriceALTC2040 9 Piece 15-40mm Aluminium Pipe Tool Kit 699.53

ALTC2063 17 Piece 20-63mm Aluminium Pipe Tool Kit 1189.45

ALTC63110 17 Piece 50-110mm Aluminium Pipe Tool Kit 2,533.26

ALTC110-160 18 Piece 100-160mm Aluminium Pipe Tool Kit 2,729.54

28 PIPING & FITTINGS

Hand Scrapper - 45mm


HSCR45For hand scraping of any pipe & spigot fittings.

Ergonomic rubber handle. 4 sided replaceable blade.28.85

Electrofusion Hand Rotary Scraper

Product code Description & Size (mm) $ PriceWPS20 20mm Hand Rotary Scraper for Electrofusion 180.00

WPS25 25mm Hand Rotary Scraper for Electrofusion 180.00





Rotary Pipe Scraping Tools

Product code Description & Size (mm) $ PriceTBOX1 Uniprep Tool Case 142.00

UNIPR2063 20-63 mm 4 Rotary Scraping tool with Toolbox 1,015.66

UNIPR75180 75-180 mm 4 Rotary Scraping tool with Toolbox 1,189.35

Disposable Welding Wipes


EFWWConvenient & safe disposable wiping cloths 70%

Isopropyl alcohol impregnated.34.72

Electrofusion Hand Rotary Scraper - Hand Drill

Product code Description & Size (mm) $ PriceWPS20HD 20mm Rotary Scraper for Electrofusion - Hand Drill 400.00

WPS25HD 25mm Rotary Scraper for Electrofusion - Hand Drill 400.00





Installation Tools

Poly Pipe Installation Tool Kit (Pipe Cutter, Drilling Bush, Hole Cutter, Mandrel, etc)

Product Code Description $ PricePTK2040 9 Piece 15-40mm Poly Pipe Tool Kit 546.11

PTK2063 17 Piece 20-63mm Poly Pipe Tool Kit 1,028.66

PTK63110 17 Piece 50-110mm Poly Pipe Tool Kit 1,442.03

To learn about the full range of benefits that our Under Pressure Hot Tap system offers, see page 8. For individual components see page 20 for Metric Compression and pages 26 and 36 for Socket Fusion and Electrofusion respectively.


Continuous Support ChannelContinuous Support Channel

CL Pipe Clip

HS Strut

Slick Nut

Girt Block

HS2U/CL Pipe Clip Assembly

HS Strut

Beam Clamp / CL Pipe Clip Assembly

Bolted Pipe Clip

Pear Clip

Threaded Rod

Rod PurlinHanger

Beam Strap Clamp

CL Pipe Clip

Beam ClampPipe Hanger

Rod PurlinHanger

Heavy Duty Beam Clamp

Beam Clamp

Rod Purlin Hanger

Continuous Support Channel (Zincalume-Steel)

Product code Size (mm x in) $ PriceHSS20-3M 20mm Ultra Channel 3m 55.50

HSS25-3M 25mm Ultra Channel 3m 56.00






Continuous Support Channel (Stainless)

Product code Size (mm x in) $ PriceHSS20SS-3M 20mm Ultra Channel 3m Stainless Steel 70.50

HSS25SS-3M 25mm Ultra Channel 3m Stainless Steel 76.50






Other sizes and lengths available to order, up to 8m. Other sizes and lengths available to order, up to 8m.


Clips & Fixings Clips & Fixings Aquarius Aquaseal Flashrite

Product Code Description Fits Sizes $ PriceAQ20 #0 Mini 3-20mm EPDM Black 3-20mm OD @ 45° 22.78

AQ45 #1 5-45mm EPDM Black 5-45mm OD @ 45° 22.78



AQ150 #5 90-150 EPDM Black 90-150mm OD @ 45° 42.78

Purlin Hanger

Product Code Description $ PriceHS1 Purlin Hanger, Used for wire or cable ties 1.98

Jack Chain

Hot dipped galvanised. Packaged in heavy duty buckets for easy handling. 2.67mm Wire Thickness

Product Code Description $ Price JC25 Jack Chain Single Link 30m Tub, Made in Australia 74.70

JC25CTL Jack Chain Single Link. Cut to length per metre cost. 2.99/m

Pipe Clip - Interlockable

Product Code Size (mm) $ PriceKXGCCL25 25 0.57

KXGCCL32 32 0.71

Pipe Clip - With Anchor Plug Interlockable

Product Code Size (mm) $ PriceKXCL20 20 0.86

KXCL25 25 1.00

KXCL32 32 1.14

Pipe Clip - Shallow Base

Product Code Size (mm) $ PriceKXGCL20 20 0.43

KXGCL25 25 0.43

KXGCL32 32 0.57

KXGCL40 40 0.86

KXGCL50 50 1.14

KXGCL63 63 1.57

Pipe Clip - Adjustable Size Range

Product Code Size (mm) $ PriceCL20 20 2.69

CL25 25 2.76

CL32 32 2.86

CL40 40 3.76

CL50 50 4.21

CL63 63 7.86

CL90 90 24.93

CL110 110 42.43

Inter-lockable. Includes removable double base block.

Pipe Markers Self-Adhesive 30 x 380 ( 50 x 400mm Available)

GASES

OILS

FIRE

MISCELLANEOUS

ACID

AIR

WATER

STEAM

Product Code Size (mm) Description $ PricePM10030 30 x 380 Boiler Feed Water 27.67

PM10130 30 x 380 Chilled Water 27.67

PM10230 30 x 380 Circulating Water 27.67

PM10330 30 x 380 Cold Water 27.67

PM10430 30 x 380 Cooling Water 27.67

PM10530 30 x 380 Distilled Water 27.67

PM10630 30 x 380 Domestic Hot Water 27.67

PM10730 30 x 380 Domestic Water 27.67

PM10830 30 x 380 Drain Water 27.67

PM10930 30 x 380 Drinking Water 27.67

PM11030 30 x 380 Rainwater 27.67

PM11130 30 x 380 Feed water 27.67

PM11230 30 x 380 Fresh Water 27.67

PM11330 30 x 380 Heating Water 27.67

PM11430 30 x 380 Hot Water 27.67

PM11530 30 x 380 Non-Potable Water 27.67

PM11630 30 x 380 Overflow 27.67

PM11730 30 x 380 Potable Water 27.67

PM11830 30 x 380 Treated Water 27.67

PM11930 30 x 380 Waste Water 27.67

PM12030 30 x 380 High Pressure Steam 27.67

PM12130 30 x 380 Low Pressure Steam 27.67

PM12230 30 x 380 Steam 27.67

PM12330 30 x 380 Acetylene 27.67

PM12430 30 x 380 Argon 27.67

PM12530 30 x 380 Carbon Dioxide 27.67

PM12830 30 x 380 Hydrogen 27.67

PM13130 30 x 380 Liquid Nitrogen 27.67

PM13230 30 x 380 Liquid Oxygen 27.67

PM13330 30 x 380 LP Gas 27.67

PM13430 30 x 380 Medical Oxygen 27.67

PM13530 30 x 380 Natural Gas 27.67

PM13630 30 x 380 Natural Gas KPA 27.67

PM13730 30 x 380 Refrigerant 27.67

PM14430 30 x 380 Hydraulic Fluid 27.67

PM14530 30 x 380 Lubricating Oil 27.67

PM14630 30 x 380 Oil 27.67

PM14730 30 x 380 Fire Fighting Water 27.67

PM14830 30 x 380 Fire Hose Reel 27.67

PM14930 30 x 380 Fire Hydrant 27.67

PM15030 30 x 380 Fire Service 27.67

PM15130 30 x 380 Fire Sprinklers 27.67

PM15230 30 x 380 Compressed Air 27.67

PM15330 30 x 380 General Purpose Air 27.67

PM15430 30 x 380 Instrument Air 27.67

PM15530 30 x 380 Low Pressure Air 27.67

PM15630 30 x 380 Vacuum 27.67

PM15730 30 x 380 Effluent 27.67

PM15830 30 x 380 Product 27.67

PM15930 30 x 380 Sewage 27.67

PM16030 30 x 380 Waste 27.67

PM16130 30 x 380 Vent 27.67

PM16230 30 x 380 Storm Water 27.67

PM16330 30 x 380 Hot Water Flow 27.67

PM16430 30 x 380 Cold Water 27.67

PM16530 30 x 380 Flow Hot Water 27.67

PM16630 30 x 380 Return Cold Water 27.67

PM16730 30 x 380 Return Domestic Cold 27.67

Cable Ties (100 Pcs)

Product Code Description $ PriceCT100 100 × 2.5 mm 2.83

CT140 140 × 3.2 mm 3.60

CT20048 200 × 4.8 mm 6.40

CT300 300 × 4.8 mm 11.33

CT37048 370 × 4.8 mm 17.33

CT37076 370 × 7.6 mm 37.00

CT45076 450 × 7.6 mm 56.00

CT540 540 × 7.6 mm 66.00

CT75088 750 × 8.8 mm 103.67

Get in touch: 08 9458 4477

10 Labels Per Pack

Clips & Fixings

48 49CLIPS & FIXINGS CLIPS & FIXINGS

Clips & Fixings Clips & Fixings Heavy Duty Purlin Hanger

Product Code Description Max Fixture Thickness $ PriceDPH10 M10 0-4mm 3.33

DPH12 M12 0-4mm 4.69

Light Duty Beam Clamp

Product Code Description Fits Size $ PriceHS2U 10.5mm / M6 0-16mm 3.58

Heavy Duty Beam Clamp

Product Code Size (mm) Max Fixture Thickness $ PriceHS3 11 20mm 5.50

HS4 13 26mm 9.90

Heavy Duty Widemouth Beam Clamp

Product Code Size (mm) Max Fixture Thickness $ PriceHS5 11 31.8mm 14.33

HS6 13 31.8mm 27.33

Vertical Mounting Plate Zinc Plated

Product Code Description $ PriceVMP10 M10 2.11

VMP12 M12 3.08

Centre Mounting Plate Zinc Plated

Product Code Description $ PriceCMP10 M10 2.19

CMP12 M12 4.47

CMPS10 M10 x 30 Stud 2.53

Horizontal Mounting Plate Zinc Plated

Product Code Description $ PriceHMP10 M10 3.50

HMP12 M12 4.47

Vertigo Vertical Hanger for Concrete

Product Code Description $ PriceVVC06 M6 4.42

VVC10 M10 4.67

Drop-in Anchor Carbon Steel Yellow Passivated

Product Code Description Drill Diameter $ PriceDRACM8 M8 x 30mm 10mm 0.78

DRACM10 M10 x 40mm 12mm 0.58

DRACM12 M12 x 50mm 15mm 7.92

Drop-in Anchor Grade 316 Stainless Steel

Product Code Description Drill Diameter $ PriceDRASSM8 M8 x 30mm 10mm 6.25

DRASSM10 M10 x 40mm 12mm 6.67

DRASSM12 M12 x 50mm 15mm 7.92

Hammer-on Beam Clamp

Product Code Description $ PriceHS1A 2-3mm Beam Thickness 1.86

HS2A 3-8mm Beam Thickness 2.11

HS2B 8-14mm Beam Thickness 2.32

HS2C 14-20mm Beam Thickness 2.67

Coupler Nut Hexagon Metric Coarse Thread Steel Zinc Plated

Product Code Description $ PriceRODJM10 M10 x 40mm 1.50

RODJM12 M12 x 40mm 1.50

RODJM16 M16 x 40mm 2.67

Clevis Hanger

Product Code Description $ PriceCHM10 M10 4.36

CHM12 M12 5.28

CHM16 M16 17.50

Hammer-on Threaded Rod Hanger

Product Code Fits Size (mm) $ PriceHS3A 2-3mm Beam Thickness 3.78

HS4A 3-8mm Beam Thickness 3.78

HS4B 8-14mm Beam Thickness 3.78

HS4C 14-20mm Beam Thickness 4.97

Threaded Rod

Product Code Description $ PriceTHRDM063M M6 Threaded Rod, 3m Length, Zinc plated, 4.6 Mild Steel 15.22

THRDM083M M8 Threaded Rod, 3m Length, Zinc plated, 4.6 Mild Steel 18.05



Call us today 08 9458 4477


Clips & Fixings Clips & Fixings Nylon Nail-In Anchor Round Head

Product Code Size Drill Diameter $ PriceNA6538 6.5 x 38mm 6.5mm 0.33

NA6550 6.5 x 50mm 6.5mm 0.44

NA6575 6.5 x 75mm 6.5mm 0.81

Needle Point Stitching Screen Button - Zinc Yellow Plated

Product Code Size $ PriceNPSS81525 8-15 x 25mm 0.06

NPSS81532 8-15 x 23mm 0.06

NPSS81540 8-15 x 40mm 0.08

Screw-Bolt Blue-Tip Hex Head Carbon Steel Yellow Passivated

Product Code Size Drill Diameter $ PriceSBBT0850 8 x 50mm 8mm 2.39

SBBT0875 8 x 75mm 8mm 2.64

SBBT08100 8 x 100mm 8mm 4.50

SBBT1060 10 x 60mm 10mm 4.92

SBBT1075 10 x 75mm 10mm 5.14

SBBT10100 10 x 100mm 10mm 6.44

Ideal for masonry fixing without plugs.

Self-Drilling Screw Washer Face Hexagon Head Full Thread Class 4

Product Code Size $ PriceTEK1235 12-14 x 35mm 0.14

TEK1245 12-14 x 45mm 0.19

Self-Drilling Series 500 Screw Washer Face Hexagon Head Class 3

Product Code Size $ PriceTEKSDS50038 12-24 x 38mm 0.58

TEKSDS50050 12-24 x 50mm 0.61

TEKSDS50065 12-24 x 65mm 0.75

Ideal for fixing to thick steel up to 12mm. Extra sharp drill point

Strut Clip Zinc Plated

Product Code Pipe Type Actual Pipe OD (mm) $ PriceSCZ013 15NB Copper Pipe 13 1.25

SCZ019 20NB Copper Pipe 19 1.33

SCZ021 15NB Steel Pipe 21 1.33







SCZ043 40NB PVC Pipe 43 1.81







SCZ076 65NB Steel/80NB CU 76 2.67



SCZ095 - 95 5.42













SCZ250 225NB PVC Pipe 250 14.22

SCZ315 300NB PVC Pipe 315 20.83

SCZ400 375NV PVC Pipe 400 29.72

M10 Welded Nut Clip For Steel Pipe (Zinc Coated Bolt Clip)

Product Code Pipe Size (mm) Actual Pipe OD (mm) $ PriceWNC15 15 21 3.86

WNC20 20 27 3.86

WNC25 25 34 3.86

WNC32 32 43 4.08

WNC40 40 48 4.08

WNC50 50 60 4.31

WNC65 65 76 7.72

WNC80 80 89 8.53

WNC100 100 114 10.22

WNC125 125 140 13.19

WNC150 150 165 14.58

Macrofix Acoustic Pipe Clip

Product Code Size (mm) Pipe Size NB $ PriceMFC15 12-15 15mm CU 1.95

MFC20 15-19 20mm CU 2.05

MFC22 20-24 - 4.17

MFC25 25-30 25mm CU 2.20

MFC32 32-37 32mm CU 2.45

MFC40 40-45 40mm CU/PVC 3.61

MFC50 48-53 50mm CU 3.70

MFC56 54-58 50mm PVC 3.70

MFC63 62-64 65mm CU 3.70

MFC70 68-73 65mm PVC 3.70

MFC80 75-80 80mm CU 3.70

MFC83 82-86 80mm PVC 3.70

MFC100 95-103 100mm CU 3.70

MFC112 108-116 100mm PVC 3.70

MFC125 121-127 125mm CU 5.92

MFC150 146-155 150mm CU 9.50

MFC160 159-162 150mm PVC 10.14

Standoff Bracket Zinc Plated

Product Code Size (mm) $ PriceSTB50 50 5.22

U-Bolt & Nut Metric Coarse Thrd 4.6 Mild Steel Galv

Product Code Internal Diameter (mm) Working Length (mm) $ PriceUB20 21 45 3.53

UB25 27 50 3.67

UB34 34 50 3.75

UB40 43 50 3.97

UB48 48 50 3.97

UB65 60 50 6.25

UB80 76 50 9.25

UB100 89 50 10.86

UB125 114 50 11.61

UB150 140 50 12.69

UB200 168 50 24.42

Pear Band Clip (Horizontal Suspended Steel Pipe Services)

Product Code Pipe Size (mm) Actual Pipe OD (mm) $ PricePBC20 20 27 1.89

PBC25 25 34 1.89

PBC32 32 43 2.11

PBC40 40 48 2.11

PBC50 50 60 2.89

PBC65 65 76 4.56

PBC80 80 89 5.11

PBC100 100 114 6.78

PBC150 150 165 12.22

Single Piece Heavy Duty Band Clip

Product Code Pipe Size (mm) Actual Pipe OD (mm) $ PriceSPHD25 25 33.7 2.31

SPHD32 32 42.3 2.50

SPHD40 40 48.3 2.72

SPHD50 50 60.3 3.33



Clips & Fixings Clips & Fixings Braced Cantilever Bracket HDG

Product Code Size (mm) $ PriceBCB300 320 35.11

BCB450 470 38.61

BCB600 635 61.81

BCB750 780 66.92

Solid Strut Hot Dipped Galvanised

Product Code Description $ PriceD1000HDG 40 x 40 x 2.5mm x 6m 138.47

D3300HDG 40 x 20 x 2.5mm x 6m 129.17

Solid Strut 316 Stainless Steel

Product Code Description $ PriceD3300SS 40 x 20 x 2.5mm x 6m 562.50

D2200SS 40 x 40 x 2.5mm x 6m 722.22

Solid Strut Galvabond

Product Code Description $ PriceD1000 40 x 40 x 2.5mm x 6m 130.67

D2000 40 x 40 x 1.6mm x 6m 101.25

D3300 40 x 20 x 2.5mm x 6m 123.61

D4000 40 x 20 x 1.6mm x 6m 104.17

D5500 40 x 60 x 2.5mm x 6m 270.64

Unbraced Cantilever Bracket HDG

Product Code Size (mm) $ PriceUCB300 300 28.28

UCB450 450 34.67

UCB600 605 45.39

UCB700 750 49.89

Slotted Strut Hot Dipped Galvanised

Product Code Description $ PriceD1000THDG 40 x 40 x 2.5mm x 6m 155.56

D3300THDG 40 x 20 x 2.5mm x 6m 155.56

Slotted Solid Strut 316 Stainless Steel

Product Code Description $ PriceD3300SST 40 x 40 x 2.5mm x 6m 591.67

D2200SST 40 x 20 x 2.5mm x 6m 1,027.78

Slotted Strut Galvabond

Product Code Description $ PriceD1000T 40 x 40 x 2.5mm x 6m 125.00

D1003T 40 x 40 x 2.5mm x 3m 77.78

D2000T 40 x 40 x 1.6mm x 6m 95.83

D3300T 40 x 20 x 2.5mm x 6m 125.67

D3303T 40 x 20 x 2.5mm x 3m 62.83

D4000T 40 x 20 x 1.6mm x 6m 73.61

Strut Nut (Long Spring) Metric Coarse Thread Steel Zinc Plated

Product Code Description $ PriceSTRNLSM8 M8 1.89

STRNLSM10 M10 2.19

STRNLSM12 M12 2.36

Flat Washer Square Metric Steel Galvanized

Product Code Size Drill Diameter (mm) $ PriceFWS4011 40 x 40mm 11 0.33

FWS4013 40 x 40mm 13 0.53

Strut Nut (Short Spring) Metric Coarse Thread Steel Zinc Plated

Product Code Description $ PriceSTRNSSPM8 M8 1.89

STRNSSPM10 M10 2.19

STRNSSPM12 M12 2.47

Looking for something specific?

Give our friendly team a call 08 9458 4477


Filter / Regulator / Lubricator Filter + Regulator + Lubricator Combo Standard Series

With Overnight Drain3 Piece, Metal bowl, 5 MicronIncludes bracket and gaugeMax. OP: 10 bar / 145 psi Operating Temp.: 5 ˚C - 60 ˚CAdjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEC3000-02M ¼” 85 174

HNEC3000-03M ⅜” 85 174

HNEC4000-04M ½” 190 221

HNEC4000-06M ¾” 190 221

HNEC5000-10M 1” 270 394

Filter-Regulator + Lubricator Combo Standard Series

With Overnight Drain2 PieceMetal bowl5 micronIncludes bracket and gaugeMax. OP: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚CAdjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEC3010-02M ¼” 85 129

HNEC3010-03M ⅜” 85 136

HNEC4010-04M ½” 190 198

HNEC4010-06M ¾” 190 238

HNEC5010-10M 1” 270 322

Filter-Regulator With Overnight Drain Standard Series

With Overnight Drain5 micronIncludes bracket and gaugeMax. OP: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚CAdjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEW3000-02M ¼” 85 80

HNEW3000-03M ⅜” 85 80

HNEW4000-04M ½” 190 132

HNEW4000-06M ¾” 190 160

HNEW5000-10M 1” 270 204

Filter + Regulator + Lubricator Combo Standard Series

With Auto Drain3 Piece, 5 MicronIncludes bracket and gaugeMax. OP: 10 bar / 145 psi Operating Temp.: 5 ˚C - 60 ˚C Adjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEC3000-02MD ¼” 85 220

HNEC3000-03MD ⅜” 85 220

HNEC4000-04MD ½” 190 274

HNEC4000-06MD ¾” 190 274

HNEC5000-10MD 1” 270 447

Filter-Regulator + Lubricator Combo Standard Series

With Auto Drain2 Piece 5 MicronIncludes bracket and gaugeMax. OP: 10 bar / 145 psi Operating Temp.: 5 ˚C - 60 ˚CAdjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEC3010-02MD ¼” 85 175

HNEC3010-03MD ⅜” 85 182

HNEC4010-04MD ½” 190 251

HNEC4010-06MD ¾” 190 291

HNEC5010-10MD 1” 270 375

Filter-Regulator With Auto Drain Standard Series

With Auto Drain5 MicronIncludes bracket and gaugeMax. OP: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚CAdjustment Range: 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceHNEW3000-02MD ¼” 85 126

HNEW3000-03MD ⅜” 85 126

HNEW4000-04MD ½” 190 185

HNEW4000-06MD ¾” 190 213

HNEW5000-10MD 1” 270 257

� Note: High pressure FRLs and Stainless Steel FRLs are available on request.Flow Rates (scfm) are approximate only

Get in touch: 08 9458 4477

21FILTRATION PRODUCTS

Filter / Regulator / Lubricator Filter With Overnight Drain Standard Series

With Manual DrainMetal bowl5 MicronMax. Operating Pressure: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚C

Product Code Size scfm $ PriceHNEF3000-02M ¼” 70 49

HNEF3000-03M ⅜” 70 56

HNEF4000-04M ½” 140 71

HNEF4000-06M ¾” 140 80

HNEF5000-10M 1” 210 110

Filter Standard Series

With Auto DrainMetal bowl5 MicronMax. Operating Pressure: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚C

Product Code Size scfm $ PriceHNEF3000-02MD ¼” 70 95

HNEF3000-03MD ⅜” 70 102

HNEF4000-04MD ½” 140 124

HNEF4000-06MD ¾” 140 133

HNEF5000-10MD 1” 210 163

Lubricator Standard Series

With metal bowlMax. Operating Pressure: 10 bar / 145 psiOperating Temp.: 5 ˚C - 60 ˚C

Product Code Size $ PriceHNEL3000-02M ¼” 49

HNEL3000-03M ⅜” 56

HNEL4000-04M ½” 66

HNEL4000-06M ¾” 78

HNEL5000-10M 1” 118

Auto Drain Standard Series - Operating Pressure: 1.5 bar to 10 bar

HED402-04 HAD402

Product Code Size $ PriceHAD402 ½” 105

HED402-04 ½” 93.50

Compact Regulator with bracket & gauge Standard Series

Operating Pressure 9.5 bar / 135 psiAdjustment Range 0.5 - 8.5 bar / 7.2 - 123 psi

Product Code Size scfm $ PriceBER2000 ¼” 10 25

BER3000 ⅜” 30 25

BER4000 ½” 95 32

Regulator Standard Series - with gauge and bracket

Operating Pressure 10 bar / 145 psiAdjustment Range 0.5 - 8.5 bar / 7.2 - 123 psi(Shown with non-standard gauge - additional cost)

Product Code Size scfm $ PriceHNER2000-02M ¼” 20 56

HNER3000-02M ¼” 85 76

HNER3000-03M ⅜” 85 76

HNER4000-04M ½” 190 84

HNER4000-06M ¾” 190 98

HNER5000-10M 1” 270 166

Regulator with gauge (no bracket) Standard Series

Operating Pressure 16 bar / 232 psiAdjustment Range 0.5 - 16 bar / 7.2 - 232 psi(Shown with non-standard gauge - additional cost)

Product Code Size scfm $ PriceHNER7000-15M 1 ½” 305 385

HNER7000-20M 2” 315 435

� Note: Flow Rates (scfm) are approximate only

22 FILTRATION PRODUCTS56 57FILTERS FILTERS

Filter / Regulator / Lubricator

Timed Solenoid DrainsElectronic Condensate Drain ValveBSP Drain Valve, with timer and DIN plug

Product Code

Port Size

(inch)

Max Press.(bar)

Ori� ce (mm) Description $ Price

DVE-230V-14 ¼ 16 3.2 230V AC 190

DVE-230V-38 ⅜ 16 3.2 230V AC 190

DVE-230V-12 ½ 16 3.2 230V AC 190

DVE-230V-34 ¾ 16 14 230V AC 298

DVE-230V-10 1 16 20 230V AC 315

DVE-110V-12 ½ 16 3.2 110V AC 190

DVE-110V-14 ¼ 16 3.2 110V AC 190

DVE-24VA-14 ¼ 16 3.2 24V AC 195

DVE-24VD-14 ¼ 16 3.2 24V DC 195

DVE-24VA-12 ½ 16 3.2 24V AC 195

DVE-24VD-12 ½ 16 3.2 24V DC 195

DVE-415V-12 ½ 16 3.2 415V AC 315

DVE-230V-11MM-1/2” ½ 16 11 230V AC 255

Also available in stainless steel

Combo Unit - Electronic Condensate BSP 11mm Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVEC-230V-11MM-12 ½ 16 11 230V, ball valve with purge plug 305

Electronic Condensate Stainless Steel Drain ValveBSP Drain Valve, with timer and DIN plug

Product Code

Port Size

(inch)

Max Press.(bar)


DVE-230V-38SS ⅜ 16 16 304 Stainless Steel, 230V AC 255

DVE-230V-12SS ½ 16 16 304 Stainless Steel, 230V AC 255

DVE-230V-34SS ¾ 16 20 304 Stainless Steel, 230V AC 320

DVE-230V-10SS 1 16 25 304 Stainless Steel, 230V AC 365

Combo Unit - Electronic Condensate BSP Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVEC-230V-14 ¼ 16 3.2 230V, � lter ball valve 240

DVEC-230V-38 ⅜ 16 3.2 230V, � lter ball valve 240

DVEC-230V-12 ½ 16 3.2 230V, � lter ball valve 240


⅜” Thumbscrew for easy filter servicing / cleaning⅜” Thumbscrew

for easy filter servicing / cleaning with purge plug for bypass draining.

SS

221CONDENSATE SYSTEMS

High Flow Regulator Professional Series

HNER7000-15P (below left) 400 scfmHNER7000-20P (Pilot Operated) Add pilot reg. 2,110 scfm (centre)HNER7000-20KIT (right)

Product Code SizeMax. Oper. Pressure Pressure Range $ Price

HNERS7000-15P 1 ½” 21 bar / 304 psi 1.75 - 17.5 bar 235

HNERS7000-20P 2” 31 bar / 450 psi 0.35 - 17.5 bar 940

HNERS7000-20KIT 2” 31 bar / 450 psi 0.35 - 17.5 bar 1,008

Internal Pilot Operated Regulators Professional Series

Product Code Port SizeMax Inlet Pressure

Pressure Range

Flow Ratescfm $ Price

HNER825-14 1 ½” 10 bar / 140 psi 0.5-8.5 bar 636 798.32

HNER925-20 2” 10 bar / 140 psi 0.5-8.5 bar 777 1,008.40

High Pressure Regulators Professional Series

Product Code Port SizeMax Inlet Pressure

Pressure Range

Flow Rate(scfm) $ Price

HNER2040-01HP ⅛” 25 bar 0.5-16 bar 70 275

HNER2040-02HP ¼” 25 bar 0.5-16 bar 70 275

HNER4040-04HP ½” 40 bar 0.5-16 bar 44 352

HNER4040-04HP25 ½” 40 bar 0.5-25 bar 44 352

HNER5040-10HP 1” 40 bar 0.5-16 bar 275 785

HNER5040-10HP25 1” 40 bar 0.5-25 bar 275 785

HNER6040-15HP 1½” 40 bar 0.5-16 bar 430 785

HNER6040-15HP25 1½” 40 bar 0.5-16 bar 430 1,422

HNER8040-20HP 2” 40 bar 0.5-16 bar 880 2,464

HNER8040-20HP25 2” 40 bar 0.5-25 bar 880 2,464

Stainless Steel Filter-Regulators Professional Series

Stainless Steel Filter RegulatorManual drainSuitable for underground mining

USFRSSC3000-02M (left) USFRSSC4000-04M (right)

Product Code Description Size scfm $ PriceUSFRSS3000-02M 1-10 bar, bracket & gauge ¼” 42 649

USFRSSC4000-04M 1.7-17.5 bar, cast body, Tee handle ½” 105 517

USFRSS4000-04M 1-10 bar, bracket & gauge ½” 105 790

Stainless Steel Filters Professional Series

Stainless Steel FilterAuto-drainSuitable for underground mining

Max. Operating Pressure 17 bar

Product Code Description Size scfm $ PriceUSFSS3000-02MD 5 µm ¼” 42 386

USFSS4000-04MD 5 µm ½” 105 486

Stainless Steel Regulators Professional Series

Suitable for underground mining

Operating Pressure1 bar - 10 bar

Product Code Description Size scfm $ PriceUSRSS3000-02M 1-10 bar, Bracket & gauge ¼” 42 565

USRSS4000-04M 1-10 bar, Bracket & gauge ½” 105 644

Filter / Regulator / Lubricator

� Note: Flow Rates (scfm) are approximate only

Find the right FRLs...Give our friendly team a call 08 9458 4477


Filter / Regulator / Lubricator Timed Solenoid Drains

58 59FILTRATION PRODUCTS CONDENSATE SYSTEMS

High Pressure Electronic Condensate Drain ValveBSP Drain Valve, with timer and DIN plug. Max. Media Temp. 160 ˚C

Product Code

Port Size

(inch)

Max Press.(bar)


DVE-230V-40B-14 ¼ 40 2.5 230V AC 210

DVE-24VA-40B-14 ¼ 40 2.5 24V AC 210

DVE-24VD-40B-14 ¼ 40 2.5 24V DC 210

DVE-230V-50B-14 ¼ 50 3.2 230V AC 210

DVE-24V-50B-14 ¼ 50 3.2 24V AC 210

DVE-230V-80B-14 ¼ 80 1.9 230V AC 235

DVE-24VA-80B-14 ¼ 80 1.9 24V AC 235

DVE-24VD-80B-14 ¼ 80 1.9 24V DC 235

DVE-230V-100B-14 ¼ 100 3.2 230V AC 420

DVE-230V-40B-12 ½ 40 2.5 230V AC 312

DVE-24VA-40B-12 ½ 40 2.5 24V AC 312

DVE-24VD-40B-12 ½ 40 2.5 24V DC 312

DVE-230V-80B-12 ½ 80 1.9 230V AC 347

DVE-24VA-80B-12 ½ 80 1.9 24V AC 347

DVE-24VD-80B-12 ½ 80 1.9 24V DC 347

Also available in stainless steel

Combo Unit - 415V Electronic Condensate BSP Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVEC-415V-12 ½ 20 11 415V, � lter ball valve 340

Filter Ball Valves

Product CodePort Sizes

(inch) Description $ PriceDVBV-12-14 ½ × ¼ Filter Ball Valve 27

DVBV-12-38 ½ × ⅜ Filter Ball Valve 27

DVBV-12-12 ½ × ½ Filter Ball Valve 27

DVBV-12-14PP ½ × ¼ Filter Ball Valve with Purge Plug 38

DVBV-12-38PP ½ × ⅜ Filter Ball Valve with Purge Plug 38

DVBV-12-12PP ½ × ½ Filter Ball Valve with Purge Plug 38

Timer analogue, RED - 0.5-10 sec ON, 0.5-45 min OFF

Product Code Description $ PriceDVT-10S-45M 24-240V, AC/DC 98

Timer, Digital

Product Code Description $ PriceDVT-10S-45D 24-240V, AC/DC 165


⅜” Thumbscrew for easy filter servicing / cleaning


⅜” Thumbscrew for easy filter servicing / cleaning with purge plug for bypass draining.

HP

Timed Solenoid Drains


Electronic Condensate BSP Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVE-230V-VA-12 ½ 16 3.5230V, � lter ball valve - dual inlet

½" external, ¼" internal249







415V Electronic Condensate BSP Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVE-415V-12 ½ 20 11 415V 325

Cast Body Drain

Product Code

Port Size

(inch)

Max Press.(bar)


DVECB-230V-14 ¼ 16 3.2 Cast Body Drain 230V 145

Compact Electronic Condensate BSP Drain Valve

Ideal for draining inline fi lters. Also available in DC.

Product Code

Port Size

(inch)scfm(bar)


DVE-230V-CS-18 ⅛ 16 2 ⅛" CS Drain Valve Compact 230V 160




DVE-230V-CS-14 ¼ 16 2 ¼" CS Drain Valve Compact 230V 160




Combo Unit - Electronic Condensate BSP Drain Valve

Product Code

Port Size

(inch)

Max Press.(bar)


DVE-230V-PS-12 ½ 16 4

Dual inlet ½" external, ¼" internal, 230V compact drain, ¼" outlet (internal thread) with

manual bypass valve

235

DVE-110V-PS-12 ½ 16 4

Dual inlet ½" external, ¼" internal, 110V compact drain,

¼" outlet (internal thread) with manual bypass valve

235

DVE-415V-PS-12 ½ 16 4



235

DVE-24V-PS-12 ½ 16 4



235

¼” Discharge Port

¼” Internal override outlet

½”

Timed Solenoid Drains


¼” Internal

222 CONDENSATE SYSTEMS

Timed Solenoid Drains Timed Solenoid Drains

60 61CONDENSATE SYSTEMS CONDENSATE SYSTEMS

Condensate DrainsHeavy Duty Metal Bowl Dripleg DrainsUltramax UMAD5000 ½” Drain Trap

Discharge per operation: 60 mL.Maximum 25 operations / minute. Height: 180 mmDiameter: 100 mmTemperature Range: -5 ˚C to 80 ˚C

Not suitable for volatile environments where thinners, trichloroethylene may be present.Keep out of direct sunlight.

Product Code Description $ PriceUMAD5000 MAD5000 ½” Drain Trap 182

Ultramax UMAD4010½” Drain Trap

Discharge per operation: 50 mL.Maximum 25 operations / minute. Height: 194 mmDiameter: 86 mmTemperature Range: -5 ˚C to 80 ˚C


Product Code Description $ PriceUMAD4010 UMAD4010 series ½” Drain Trap 165

Mechanical Condensate Drains for Receiver Tanks and Drip Legs HAD402 ½” Drain Trap

Discharge per operation: 70 mL.Maximum 25 operations / minute. Height: 180 mmDiameter: 85 mmTemperature Range: 1 ˚C to 60 ˚C


Product Code Description $ PriceHAD402 Ultramax ½” inlet c/w & strainer 105

Dripleg Drains Specifi cations

Product Code

Press. (MPa)

Max Press. (MPa)

Temp.(˚C)

Filter Grade(µm)

PortSize

Drain Port Size Body Material

HAD402 0 - 1.0 1.5 5 - 60 - ½” ⅛” Aluminium Alloy

HNEF4000-04MD ½” Filter Drain Separator Trap



Product Code Description $ PriceHNEF4000-04MD Ultramax ½” Filter Drain Separator Trap 124


Product CodePress. (MPa)

Max Press. (MPa)

Temp.(˚C)

Filter Grade(µm)

PortSize

Drain Port Size

Body Material

HNEF4000-04MD 0 - 1.0 1.5 5 - 60 5 ½” ½”Aluminium

Alloy

EXAMPLECall us today 08 9458 4477


Dripleg Drains ¡ Large port size and path for particles and rust to

pass through.

¡ Special anti-corrosion coatings made to withstand acid and alkali without any corrosion occurring.

¡ Large volume fi ltered dirt storing compartment can fi lter and store more rust and dirt than other common automatic drain valves.

¡ Large size water collecting bowl can store and drain more water, which can reduce the draining time and increase the service life of automatic drain valve.

¡ High quality VITON rubber O-Rings can endure abrasion without leakage. Its service time is ten times longer than NBR rubber.

Drip leg drains are best installed at low points in your piping system and at the far end of the distribution network where water is likely to accumulate.A ball valve is recommended and should be installed above the drain so that the Dripleg Drain can be isolated for recommended periodic maintenance required for the unit.

The air line drops are taken from the top of the main line, preventing any condensate which forms in the main line from following into the branch lines.

Dripleg Drains are ideal where there is no power socket available or no electrical equipment is permitted, such as zone zero areas.

Mechanical Condensate Drains for Receiver Tanks and Drip Legs HED402-04 ½” Drain Trap



Product Code Description $ PriceHED402-04 Ultramax ½” inlet c/w & strainer 93.50


Product Code

Press. (MPa)

Max Press. (MPa)

Temp.(˚C)

Filter Grade(µm)

PortSize

Drain Port Size Body Material

HED402-04 0 - 1.0 1.5 5 - 60 - ½” ⅛” Aluminium Alloy

Condensate Drains

Dripleg Drain Con� gurations

EXAMPLE EXAMPLE EXAMPLE EXAMPLE

214 CONDENSATE SYSTEMS

Condensate Drains

62 63CONDENSATE SYSTEMS CONDENSATE SYSTEMS

Pneumatic Muf� ersMuf� er / Filters

These muffl er/fi lters are ideal for silencing compressed air exhausting from such devices as air valves, air motors and impact air tools. In addition, they also prevent valve orifi ces from being contaminated by outside impurities.

Features ¡ Effi cient noise ¡ Compact ¡ Low fl ow restriction ¡ Lightweight ¡ Long life

Muf� er / Filters Plastic Moulded Type

Product Code SizeMax.

Press.Temp. Range

Silencing Effect

Flow(L/min) $ Price

PMSU08 ¼”

0 - 1.0(MPa)

5 - 60(˚C)

> 30 db

2,600 9.82

PMSU15 ½” 5,050 12.92

PMSU20 ¾” 8,640 16.40

PMSU25 1” 24.92

Flow Rate at: inlet 0.6 MPa, Outlet to atmosphere

High Flow Pneumatic SilencersQuick, inexpensive method for reducing work area noise. At the same time, pneumatic silencers protect the inside of the valve from contamination through the exhaust ports.

Features ¡ Tough, compact and ideally

suited for use where space is limited

¡ High fl ow capacity ¡ Minimal back pressure ¡ Designed with a precise

distribution of peripheral openings, the silencers softly disperse exhaust air uniformly over a 360˚ pattern to provide eff ective reduction of air exhaust noise

¡ Constructed of a corrosion-resistant metal to withstand shock and continuous heavy-duty use under many conditions

Construction ¡ Zinc plated Steel ¡ Brass screen

Applications ¡ Ideally suited for use on exhaust ports of valves

single acting cylinders and air tools ¡ In addition to reducing noise levels, they may also

be used to keep out foreign material

Speci� cationsMaximum Working Pressure: 125 psiWorking Temperature Range: 4 ˚C to 149 ˚C

High Flow Pneumatic Silencers

Prod. No Thread BSPTOverall Length

(mm)”Air Flow SCFM

@ 90 psi $ Price

PSHF06 ⅛” 35 44 15.23

PSHF08 ¼” 45 96 15.23

PSHF10 ⅜” 58 200 19.45

PSHF15 ½” 70 304 21.20

PSHF20 ¾” 80 560 30.78

PSHF25 1” 98 800 40.68

PSHF32 1¼” 112 1,500 68.15

PSHF40 1½” 125 2,000 79.50

PSHF50 2” 137 2,300 98.75

Muf� ers


297MUFFLERS

High Pressure, High Flow Pneumatic SilencersFeatures

¡ Compact

¡ Corrosion-resistant Aluminium

¡ High fl ow capacity

¡ Slotted body permits rapid discharge of air without undesirable back pressure

Construction ¡ Aluminium

Applications ¡ Ideally suited for use on exhaust ports of valves

and air tools

¡ In addition to reducing noise levels, they may also be used to keep out foreign material

Speci� cationsMaximum Working Pressure: 300 psiWorking Temperature Range: 4 ˚C to 149 ˚C

Prod. No Thread BSPTOverall Length

(mm)Air Flow

SCFM @ 90 psi $ Price

PSHF06HP ⅛” 48 40 17.80

PSHF08HP ¼” 48 86 17.80

PSHF010HP ⅜” 86 180 22.80

PSHF15HP ½” 86 274 37.42

PSHF20HP ¾” 118 504 58.50

PSHF25HP 1” 118 720 66.50

Muf� ers

PSHF

04HP

PSHF

25HP

PSHF25

PSHF

15

296 MUFFLERS64 65MUFFLERS MUFFLERS

Muf� ersStainless Steel Silencer

Maximum Working Pressure: 116 psi

Working Temperature:-10 ˚C to 250 ˚C

Product Code Port Size $ Price

SS06 ⅛” 13.00

SS08 ¼” 19.41

SS10 ⅜” 29.02

SS15 ½” 45.23

SS20 ¾” 75.32

SS25 1” 118.41

Stainless Steel Silencer Flat




SSV06 ⅛” 10.15

SSV08 ¼” 17.27

SSV10 ⅜” 23.68

SSV15 ½” 36.68

SSV20 ¾” 62.50

SSV25 1” 96.87

Stainless Steel Exhaust Regulator/Silencer


Working Temperature:0 ˚C to 149 ˚C


SSER06 ⅛” 47.36

SSER08 ¼” 60.36

SSER10 ⅜” 77.64

SSER15 ½” 103.45

SSER20 ¾” 129.27

SSER15 1” 206.73

Brass Silencer Flat




BSS06 ⅛” 1.96

BSS08 ¼” 2.85

BSS10 ⅜” 4.99

BSS15 ½” 6.94

BSS20 ¾” 11.93

BSS25 1” 21.55

BSS32 1¼” 81.91

BSS40 1½” 105.59

BSS50 2” 161.50

Brass Exhaust Regulator/Silencer




BERS06 ⅛” 6.05

BERS08 ¼” 8.01

BERS10 ⅜” 13.00

BERS15 ½” 19.23

BERS20 ¾” 37.75

BERS25 1” 60.36

Brass Silencer




BRAS06 ⅛” 2.31

BRAS08 ¼” 3.92

BRAS10 ⅜” 6.41

BRAS15 ½” 9.08

BRAS20 ¾” 16.20

BRAS25 1” 36.68

BRAS32 1¼” 96.87

BRAS40 1½” 129.27

BRAS50 2” 189.64


298 MUFFLERS

Standard SeriesRecommended for general purpose air exhaust applications for pressuresup to 125 psi (8.6 bar).

Standard Series Air Exhaust Muf� ers

Product Code

PortSize

Flow(scfm

@ 90psi)$ Price(each)

U121002 ¼” 84 57

U121000 ⅜” 192 79

U121005 ½” 256 85

U121007 ¾” 544 103

U121010 1” 800 113

U121012 1¼” 1,360 120

U121015 1½” 2,080 183

U121020 2” 3,200 235

U121030 * 3” 7,200 853

U121040 * 4” 14,000 937

U121060 * 6” 36,000 1,405

* 4 Elements required per unitAvailable in NPT also.

Standard Serieswith Relief Valve

Recommended for general purpose air exhaust applications for pressures up to 175 psi (12 bar).

Standard Series Air Exhaust Muf� ers with Relief Valve

Product Code

PortSize

Flow(scfm


U322002 ¼” 84 79.17

U322000 ⅜” 192 109.72

U322005 ½” 256 118.06

U322007 ¾” 544 143.06

U322010 1” 800 157.00

U322012 1¼” 1,360 166.67

U322015 1½” 2,080 254.17

U322020 2” 3,200 285.00

U322030 * 3” 7,200 1,040.24

U322040 * 4” 14,000 1,142.68

U322060 * 6” 36,000 1,713.41

* 4 Elements required per unitAvailable in NPT also.

High Pressure SeriesRecommended for general purpose air exhaust applications for pressures exceeding 150 psi (10.3 bar)

High Pressure Series Air Exhaust Muf� ers with Relief Valve

Product Code

PortSize

Flow(scfm


U326002 ¼”

Variable

116.33

U326000 ⅜” 161.22

U326005 ½” 173.47

U326007 ¾” 210.20

U326010 1” 230.61

U326012 1¼” 244.90

U326015 1½” 373.47

U326020 2” 479.59

U326030 * 3” 1,740.82

U326040 * 4” 1,912.24

U326060 * 6” 2,867.35

* 4 Elements required per unit. Available in NPT also.

� Pressure and fl ow details required for these to be ordered and manufactured to suit specifi c requirements.

� Alternative brass safety relief valves maybe fi tted at set pressures.

Muf� ers

Replacement Element

3” Muf� er¼”, ½”, 1” Muf� ers

Did you know?Standard Series Muf� ers can be used as tank breathers!

294 MUFFLERS

Mufflers

66 67MUFFLERS MUFFLERS

Pressure Gauges

Can’t � nd the gauge you want?

We have many other gauges available.Give our friendly team a call 08 9458 4477

UltraAir Pressure GaugeSteel rear entry

UltraAir Pressure GaugeSteel bottom entry

UltraAir Pressure GaugeStainless Steel rear entry

UltraAir Pressure GaugeStainless Steel bottom entry

301GAUGES, TRANSMITTERS & FLOW METERS

Pressure Gauges

UltraAir Pressure Gauge - rear entry

Product CodeFace Size

(mm)Thread Size

BSPT Entry Oil Range Case Face Internal material $ Price

PGRE40100/145 40 ⅛” Rear 0-1000kpa (145psi) Steel Glass Brass 12

PGRE501600/230 50 ¼” Rear 0-1600kpa (230psi) Steel Glass Brass 12



PGRE1001600/230 100 ⅜” Rear 0-1600kpa (230psi) Steel Glass Brass 30

PGRESS631600/230 63 ¼” Rear Oil 0-1600kpa (230psi) Stainless Glass Brass 34

PGRESS801600/230 80 ⅜” Rear Oil 0-1600kpa (230psi) Stainless Glass Brass 48

PGRESS1001600/230 100 ⅜” Rear Oil 0-1600kpa (230psi) Stainless Glass Brass 63

PGRESSINT631600/230 63 ¼” Rear Oil 0-1600kpa (230psi) Stainless Glass Stainless 65

PGRESSINT1001600/231 100 ⅜” Rear Oil 0-1600kpa (230psi) Stainless Glass Stainless 115

UltraAir Pressure Gauge - bottom entry

Product CodeFace Size

(mm)Thread Size

BSPT Entry Oil Range Case Face Internal material $ PricePGBE501600/230 50 ¼” Bottom 0-1600kpa (230psi) Steel Glass Brass 12

PGBE631600/230 63 ¼” Bottom 0-1600kpa (230psi) Steel Glass Brass 12

PGBE801600/230 80 ¼” Bottom 0-1600kpa (230psi) Steel Glass Brass 22

PGBE1001600/230 100 ⅜” Bottom 0-1600kpa (230psi) Steel Glass Brass 30

PGBESS631600/230 63 ¼” Bottom Oil 0-1600kpa (230psi) Stainless Glass Brass 34

PGBESS1001600/230 100 ⅜” Bottom Oil 0-1600kpa (230psi) Stainless Glass Brass 63

PGBESSINT631600/230 63 ¼” Bottom Oil 0-1600kpa (230psi) Stainless Glass Stainless 65

PGBESSINT1001600/231 100 ⅜” Bottom Oil 0-1600kpa (230psi) Stainless Glass Stainless 115

Want your logo on pressure gauges?Minimum order 100 piecesAdditional artwork charges apply

Do you need pressure certi� ed gauges?

Call our technical team 08 9458 4477

300 GAUGES, TRANSMITTERS & FLOW METERS68 69GAUGES GAUGES

Brass FittingsBrass Lugged Elbow Female

Product code Description $ PriceBLEF15 ½” Brass Lugged Elbow 8.43

BLEF20 ¾” Brass Lugged Elbow 13.57

BLEF15Y ½” Brass Lugged Elbow Double Outlet Y 28.56

BLEF15H ½” Brass Lugged Elbow Double Outlet 23.28

Brass Tee Male Female

Product code Description $ PriceBTMF15 ½” Brass Male Tee 9.53

Brass Hex Nipple

Product code Description $ PriceBHN06 1⁄8” Brass Threaded Hex Nipple 1.10

BHN08 ¼” Brass Threaded Hex Nipple 1.83

BHN10 3⁄8” Brass Threaded Hex Nipple 2.13

BHN15 ½” Brass Threaded Hex Nipple 2.75

BHN20 ¾” Brass Threaded Hex Nipple 3.85

BHN25 1” Brass Threaded Hex Nipple 7.15

BHN32 1¼” Brass Threaded Hex Nipple 9.53

BHN40 1½” Brass Threaded Hex Nipple 13.93

BHN50 2” Brass Threaded Hex Nipple 19.80

Brass Threaded Elbow Female

Product code Description $ PriceBE06 1⁄8” Brass FI Threaded Elbow 2.93

BE08 ¼” Brass FI Threaded Elbow 2.93

BE10 3⁄8” Brass FI Threaded Elbow 4.77

BE15 ½” Brass FI Threaded Elbow 4.77

BE20 ¾” Brass FI Threaded Elbow 6.97

BE25 1” Brass FI Threaded Elbow 11.73

BE32 1¼” Brass FI Threaded Elbow 20.17

BE40 1½” Brass FI Threaded Elbow 29.15

BE50 2” Brass FI Threaded Elbow 43.63

Brass Hose Barb Hose × Thread

Product code Description (Hose size × Thread) $ Price

BHB0808 8 × ¼” MI Brass Hose Barb 1.65

BHB0810 8 × 3⁄8” MI Brass Hose Barb 2.38

BHB0815 8 × ½” MI Brass Hose Barb 2.38

BHB1008 10 × ¼” MI Brass Hose Barb 3.12





BHB1220 12 × ¾” MI Brass Hose Barb 5.87



BHB2025 20 × 1” MI Brass Hose Barb 11.55



BHB3232 32 × 1¼” MI Brass Hose Barb 19.07

BHB4040 40 × 1½” MI Brass Hose Barb 24.20


BHB6565 65 × 2½” MI Brass Hose Barb 73.70



Find � ttings today 08 9458 4477

231FITTINGS

¼” BSP - Soft Seat - ASME Coded (NPT available on request)

Product Code

Pressure Setting Range

scfm $ Pricepsi kPaSRV ¼” – 80/551 80 551 76 11.90

SRV ¼” – 125/861 125 861 112 11.90

SRV ¼” – 140/965 140 965 124 11.90

SRV ¼” – 150/1034 150 1,034 132 11.90

SRV ¼” – 160/1103 160 1,103 141 11.90

SRV ¼” – 200/1378 200 1,378 173 11.90

SRV ¼” – unset 25 – 450 172 – 3,102 31 – 377 11.50

� Stainless Steel Unset Springs for ¼” SRVs

Product Code


scfm Colour $ Pricepsi kPa4375 25 – 49 172 – 337 31 – 38 Red 2.70

4380 35 – 54 241 – 372 39 – 54 Yellow 2.70

4381 55 – 95 379 – 655 55 – 88 Purple 2.70

4378 96 – 145 661 – 999 89 – 128 White 2.70

4383 146 – 229 1,006 – 1,578 129 – 197 Orange 2.70

4384 230 – 350 1,585 – 2,413 198 – 295 Blue 2.70

1299N 351 – 450 2,420 – 3,102 296 – 377 Natural 2.70

½” BSP – Soft Seat – ASME Coded (NPT available on request)

Product Code


scfm $ Pricepsi kPaSRV ½” – 75/517 75 517 150 36.85

SRV ½” – 125/861 125 861 235 36.85

SRV ½” – 130/896 130 896 244 36.85

SRV ½” – 140/965 140 965 261 36.85

SRV ½” – 150/1034 150 1,034 278 36.85

SRV ½” – 165/1137 165 1,137 304 36.85

SRV ½” – 175/1206 175 1,206 321 36.85

SRV ½” – unset 25 – 300 172 – 2,068 66 – 534 36.85

� Stainless Steel Unset Springs for ½” SRVs

Product Code



4386 56 – 95 386 – 655 118 – 184 Natural 4.05

4387 96 – 125 661 – 861 186 – 235 Green 4.05

4388 126 – 150 868 – 1,034 237 – 278 White 4.05

4400 151 – 195 1,041 – 1,344 280 – 355 Orange 4.05

4401 196 – 300 1,351 – 2,068 356 – 534 Black 4.05

¾” BSP – Soft Seat – ASME Coded (NPT available on request)

Product Code


scfm $ Pricepsi kPaSRV ¾” – 125/861 125 861 509 93

SRV ¾” – 140/965 140 965 565 93

SRV ¾” – 150/1034 150 1,034 601 93

SRV ¾” – 165/1137 165 1,137 657 93

SRV ¾” – 174/1200 174 1,200 691 93

SRV ¾” – unset 25 – 300 172 – 2,068 143 – 1,154 91

� Stainless Steel Unset Springs for ¾” SRVs

Product Code



4466 51 – 79 351 – 544 237 – 340 Natural 6.75

4467 80 – 125 551 – 861 344 – 509 Green 6.75

4468 126 – 170 868 – 1,172 513 – 675 White 6.75

4469 171 – 259 1,179 – 1,785 679 – 1,003 Orange 6.75

4470 260 – 300 1,792 – 2,068 1,007 – 1,154 Black 6.75

1” BSP – Soft Seat – ASME Coded (NPT available on request)

Product Code


scfm $ Pricepsi kPaSRV 1”-100/689 100 689 889 174

SRV 1”-140/965 140 965 1,202 174

SRV 1”-150/1034 150 1,034 1,281 174

SRV 1”-unset 25 – 300 172 – 2,068 304 – 2,457 174

1¼” BSP - Soft Seat - ASME Coded (NPT available on request)

Product Code


scfm $ Pricepsi kPaSRV 1¼” – unset 25 – 300 172 – 2,068 304 – 2,457 220

� Stainless Steel Unset Springs for 1” and 1¼” SRVs

Product Code



4454 40 – 60 276 – 414 418 – 575 Natural 6.75

4455 61 – 104 420 – 717 583 – 920 Green 6.75

4456 105 – 150 724 – 1,034 928 – 1,281 White 6.75

4457 151 – 190 1,041 – 1,310 1,289 – 1,594 Orange 6.75

4458 191 – 300 1,316 – 2,068 1,602 – 2,457 Black 6.75

Applications:High fl ow requirements.

Construction:Seat, Cap & Piston: ASTM B16 Brass.Spring: 17-7 Stainless Steel.Seal: Silicone (standard) / Viton (on request).

NOTES:

Operating Temperature Range: -50 ˚C to 200 ˚C We can supply other pressure settings to order. Batch Certifi cates can be supplied. All Safety Valves can be recertifi ed. Silicon Seal Max Temperature: 120 ˚C. Viton Seal Max Temperature: 230 ˚C.

Soft Seat

Safety Relief Valves

272 VALVES

Safety Relief Valves

70 71SAFETY RELIEF VALVES FITTINGS

M & F Adaptor Fi × Mi


BMFAD0808 ¼”-¼” Brass MF Adaptor 2.85

BMFAD1008 3⁄8”-¼” Brass MF Adaptor 6.00

BMFAD1015 3⁄8”-½” Brass MF Adaptor 4.15

BMFAD1508 ½”-¼” Brass MF Adaptor 4.39

BMFAD1510 ½”-3⁄8” Brass MF Adaptor 4.39

BMFAD2015 ¾”-½” Brass MF Adaptor 5.79

BMFAD2520 1”-¾” Brass MF Adaptor 6.56

Brass M × F Elbow

Product code Description $ PriceBMFE06 1⁄8” Brass MF Threaded Elbow 2.57

BMFE08 ¼” Brass MF Threaded Elbow 3.48

BMFE10 3⁄8” Brass MF Threaded Elbow 4.40

BMFE15 ½” Brass MF Threaded Elbow 5.50

BMFE20 ¾” Brass MF Threaded Elbow 6.60

BMFE25 1” Brass MF Threaded Elbow 14.85

BMFE32 1¼” Brass MF Threaded Elbow 24.20

BMFE40 1½” Brass MF Threaded Elbow 28.97

BMFE50 2” Brass MF Threaded Elbow 41.43

Y Piece


BDOMF15 ½” Brass Y Piece 11.70

Brass Tee

Product code Description $ PriceBT06 1⁄8” Brass FI Threaded Tee 2.49

BT08 ¼” Brass FI Threaded Tee 3.85

BT10 3⁄8” Brass FI Threaded Tee 5.13

BT15 ½” Brass FI Threaded Tee 6.42

BT20 ¾” Brass FI Threaded Tee 10.82

BT25 1” Brass FI Threaded Tee 17.23

BT32 1¼” Brass FI Threaded Tee 26.77

BT40 1½” Brass FI Threaded Tee 46.20

BT50 2” Brass FI Threaded Tee 65.63

Brass Plug

Product code Description $ PriceBP06 1⁄8” Brass Plug 0.92

BP08 ¼” Brass Plug 1.28

BP10 3⁄8” Brass Plug 1.72

BP15 ½” Brass Plug 2.20

BP20 ¾” Brass Plug 2.93

BP25 1” Brass Plug 5.39

BP32 1¼” Brass Plug 10.27

BP40 1½” Brass Plug 12.47

BP50 2” Brass Plug 17.60

Lock Nut

Product code Description $ PriceBN06 1⁄8” Brass Nut 0.98

BN08 ¼” Brass Nut 0.98

BN10 3⁄8” Brass Nut 0.98

BN15 ½” Brass Nut 1.15

BN20 ¾” Brass Nut 1.36

BN25 1” Brass Nut 2.75

BN32 1¼” Brass Nut 4.22

BN40 1½” Brass Nut 4.95

BN50 2” Brass Nut 5.68

Brass Fittings

233FITTINGS

Brass Reducing Bush


BRB0806 ¼”–1⁄8” Brass Reducing Bush 1.10

BRB1006 3⁄8”–1⁄8” Brass Reducing Bush 1.65

BRB1008 3⁄8”–¼” Brass Reducing Bush 1.65

BRB1506 ½”–1⁄8” Brass Reducing Bush 3.37

BRB1508 ½”–¼” Brass Reducing Bush 3.37

BRB1510 ½”–3⁄8” Brass Reducing Bush 3.37

BRB2008 ¾”–¼” Brass Reducing Bush 4.58

BRB2015 ¾”–½” Brass Reducing Bush 4.58

BRB2515 1”–½” Brass Reducing Bush 5.68

BRB2520 1”–¾” Brass Reducing Bush 5.68

BRB3215 1¼”–½” Brass Reducing Bush 12.91

BRB3220 1¼”–¾” Brass Reducing Bush 12.91

BRB3225 1¼”–1” Brass Reducing Bush 12.91

BRB4020 1½”–¾” Brass Reducing Bush 16.87

BRB4025 1½”–1” Brass Reducing Bush 16.87

BRB4032 1½”–1¼” Brass Reducing Bush 16.87

BRB5020 2”–¾” Brass Reducing Bush 27.13

BRB5025 2”–1” Brass Reducing Bush 27.13

BRB5032 2”–1¼” Brass Reducing Bush 27.30

BRB5040 2”–1½” Brass Reducing Bush 27.30

Brass Cap

Product code Description $ PriceBC15 ½” Brass Cap 1.65

BC20 ¾” Brass Cap 4.22

BC25 1” Brass Cap 6.05

BC32 1¼” Brass Cap 11.73

BC40 1½” Brass Cap 14.48

BC50 2” Brass Cap 19.80

Brass Reducing Nipple


BRHN0806 ¼”–1⁄8” Brass Red Hex Nipple 1.10

BRHN1006 3⁄8”–1⁄8” Brass Red Hex Nipple 2.02

BRHN1008 3⁄8”–¼” Brass Red Hex Nipple 2.02

BRHN1508 ½”–¼” Brass Red Hex Nipple 2.75

BRHN1510 ½”–3⁄8” Brass Red Hex Nipple 2.75

BRHN2015 ¾”–½” Brass Red Hex Nipple 3.48

BRHN2515 1”–½” Brass Red Hex Nipple 5.79

BRHN2520 1”–¾” Brass Red Hex Nipple 5.39

BRHN3220 1¼”–¾” Brass Red Hex Nipple 10.08

BRHN3225 1¼”–1” Brass Red Hex Nipple 10.63

BRHN4020 1½”–¾” Brass Red Hex Nipple 17.23

BRHN4025 1½”–1” Brass Red Hex Nipple 17.23

BRHN4032 1½”–1¼” Brass Red Hex Nipple 17.23

BRHN5015 2”–½” Brass Red Hex Nipple 19.07

BRHN5020 2”–¾” Brass Red Hex Nipple 19.25

BRHN5025 2”–1” Brass Red Hex Nipple 20.17

BRHN5032 2”–1¼” Brass Red Hex Nipple 21.27

Brass Socket (Hex)

Product code Description $ PriceBS06 1⁄8” Brass Hex Socket 1.47

BS08 ¼” Brass Hex Socket 2.20

BS10 3⁄8” Brass Hex Socket 2.57

BS15 ½” Brass Hex Socket 4.03

BS20 ¾” Brass Hex Socket 5.50

BS25 1” Brass Hex Socket 7.52

BS32 1¼” Brass Hex Socket 13.57

BS40 1½” Brass Hex Socket 16.87

BS50 2” Brass Hex Socket 19.43

Brass Hex Reducing Socket


BHRS2015 ¾”–½” Brass Hex Red Socket 5.43

BHRS2520 1”–¾” Brass Hex Red Socket 8.07

Going nuts looking for a � tting?


Brass Fittings

232 FITTINGS72 73FITTINGS FITTINGS

Spring Check Valve

Product code Description $ PriceNRV10 3⁄8” Spring Check Valve 9.24

NRV15 ½” Spring Check Valve 9.24

NRV20 ¾” Spring Check Valve 11.75

NRV25 1” Spring Check Valve 15.79

NRV32 1¼” Spring Check Valve 24.64

NRV40 1½” Spring Check Valve 33.50


NRV65 2½” Spring Check Valve 103.95



Swing Check Valve


BCHVSW15 ½” Swing Check Valve 11.18

BCHVSW20 ¾” Swing Check Valve 15.99

BCHVSW25 1” Swing Check Valve 22.73

BCHVSW32 1¼” Swing Check Valve 35.42

BCHVSW40 1½” Swing Check Valve 45.83





Te� on Tape


TFLN1510W Water � 15mm × 0.1 × 10m 3.49

TFLN1530W Water � 15mm × 0.1 × 30m 8.98

TFLN1510G Gas/Air � 15mm × 0.1 × 10m 3.90

TFLN1530G Gas/Air � 115mm × 0.1 × 30m 9.96

Anaerobic Thread Sealant


ANTS100 100ml Anaerobic Thread Sealant 37.40

ANTS250 200ml Anaerobic Thread Sealant 94.23

Thread Sealing Products

235FITTINGS

Back Nut Flanged

Product code Description $ PriceBNF15 ½” Brass Nut Flanged 2.38

BNF20 ¾” Brass Nut Flanged 4.03

BNF25 1” Brass Nut Flanged 6.42

BNF32 1¼” Brass Nut Flanged 8.98

BNF40 1½” Brass Nut Flanged 11.18

BNF50 2” Brass Nut Flanged 13.20

Barrel Unions Male × Female

Product code Description $ PriceBUMF08 1⁄8” Brass Barrel Union MF 5.50

BUMF10 3⁄8” Brass Barrel Union MF 8.07

BUMF15 ½” Brass Barrel Union MF 11.37

BUMF20 ¾” Brass Barrel Union MF 16.13

BUMF25 1” Brass Barrel Union MF 20.17

BUMF32 1¼” Brass Barrel Union MF 33.55

BUMF40 1½” Brass Barrel Union MF 42.17

BUMF50 2” Brass Barrel Union MF 53.90

Barrel Unions Female × Female

Product code Description $ PriceBUFF08 1⁄8” Brass Barrel Union FF 5.32

BUFF10 3⁄8” Brass Barrel Union FF 7.52

BUFF15 ½” Brass Barrel Union FF 10.63

BUFF20 ¾” Brass Barrel Union FF 14.48

BUFF25 1” Brass Barrel Union FF 20.72

BUFF32 1¼” Brass Barrel Union FF 29.52

BUFF40 1½” Brass Barrel Union FF 41.07

BUFF50 2” Brass Barrel Union FF 53.17

Brass Y Line Strainer

Product code Description $ PriceLS15 ½” Brass Y Line Stainer 11.18

LS20 ¾” Brass Y Line Stainer 15.03

LS25 1” Brass Y Line Stainer 21.63

LS32 1¼” Brass Y Line Stainer 37.77

LS40 1½” Brass Y Line Stainer 49.32

LS50 2” Brass Y Line Stainer 86.64

All Thread Nipple


BATHN06 1⁄8” Brass All Thread Nip 150mm 8.43

BATHN08 ¼” Brass All Thread Nip 150mm 8.43

BATHN10 3⁄8” Brass All Thread Nip 150mm 9.90

BATHN15 ½” Brass All Thread Nip 150mm 10.35

BATHN20 ¾” Brass All Thread Nip 150mm 16.94

BATHN25 1” Brass All Thread Nip 150mm 22.37

BATHN32 1¼” Brass All Thread Nip 150mm 43.63

BATHN40 1½” Brass All Thread Nip 150mm 46.80

BATHN50 2” Brass All Thread Nip 150mm 51.70

Foot Valve

Product code Description $ PriceBFV15 ½” Foot Valve 12.14

BFV20 ¾” Foot Valve 16.17

BFV25 1” Foot Valve 19.65

BFV32 1¼” Foot Valve 28.12

BFV40 1½” Foot Valve 37.73





Brass Fittings

Did you know?BSP = British Standard Pipe threadNPT = National Pipe Thread (USA)

234 FITTINGS

For use on metal threads only. -20 °C to 148 °C. Gas approved to 2000 kPa

74 75FITTINGS FITTINGS

Ball ValvesAGA Approved Ball ValvesF × F

Product Code Size $ PriceBVGAS08 ¼” 9.53

BVGAS10 ⅜” 10.45

BVGAS15 ½” 11.92

BVGAS20 ¾” 17.60

BVGAS25 1” 30.43

BVGAS32 1¼” 43.82

BVGAS40 1½” 68.93

BVGAS50 2” 105.60

AGA Approved Ball ValvesF × F with lockable handle

Product Code Size $ PriceBVGAS15L ½” 36.69

BVGAS20L ¾” 53.81

BVGAS25L 1” 40.15

BVGAS32L 1¼” 58.48

BVGAS40L 1½” 168.60

BVGAS50L 2” 236.01

General Industry Gate Valve

Product Code Size $ PriceGV15 ½” 13.93

GV20 ¾” 18.70

GV25 1” 26.58

GV32 1¼” 37.77

GV40 1½” 47.30

GV50 2” 73.15

GV65 2½” 165.00

GV80 3” 205.33

GV100 4” 348.33

AGA Approved Ball Valveswith lockable handle M × F

Product Code Size $ PriceBVGAS25LMF 1” 40.15

BVGAS32LMF 1¼” 58.48

BVGAS50LMF 2” 236.01

AGA Approved Ball ValvesT Handle F × F

Product Code Size $ PriceBVTH08 ¼” 23.88

BVTH10 ⅜” 25.43

BVTH15 ½” 18.57

BVTH20 ¾” 23.85

BVTH25 1” 34.28

AGA Approved Ball ValvesT Handle - M × F

Product Code Size $ PriceBVTHMF08 ¼” 24.62

BVTHMF10 ⅜” 26.27

BVTHMF15 ½” 18.30

BVTHMF20 ¾” 23.85

BVTHMF25 1” 35.20

Many other Valves available.Please call us with your requirements 08 9458 4477

259VALVES

General Industry Ball ValveF × F

Product Code Size $ PriceBV08 ¼” 9.53

BV10 ⅜” 11.37

BV15 ½” 12.47

BV20 ¾” 17.42

BV25 1” 28.42

BV32 1¼” 41.43

BV40 1½” 65.27

BV50 2” 80.85

BV65 2½” 177.83

BV80 3” 277.20

BV100 4” 462.00

General Industry Ball ValvesM × F

Product Code Size $ PriceBVMF08 ¼” 19.29

BVMF10 ⅜” 19.29

BVMF15 ½” 19.29

BVMF20 ¾” 19.29

BVMF25 1” 29.88

BVMF32 1¼” 43.45

BVMF40 1½” 68.57

BVMF50 2” 92.40

Mini Ball ValveF × F

Product Code Size $ PriceBVMFF08 ¼” 7.52

BVMFF10 ⅜” 7.52

BVMFF15 ½” 8.10

BVMFF20 ¾” 32.90

Mini Ball ValveM × F

Product Code Size $ Price

BVMMF06 ⅛” 7.52

BVMMF08 ¼” 7.52

BVMMF10 ⅜” 7.52

BVMMF15 ½” 8.10

BVMMF20 ¾” 32.90

Ball Valvesball valve FI × FI watermarked HVAC with test plug


BVHV10F ⅜” 28.42

BVHV15F ½” 30.07

BVHV20F ¾” 38.13

BVHV25F 1” 61.60

BVHV32F 1¼” 86.53

BVHV40F 1½” 135.30

BVHV50F 2” 206.07

Ball Valves

WatermarkThe WaterMark Certi� cation Scheme provides a nationally consistent, risk based certi� cation scheme for ensuring

the quality of certain materials and products used in plumbing and drainage installations.[http://www.abcb.gov.au/product-certi� cation/watermark]

258 VALVES76 77VALVES VALVES

Ball Valves2-Piece Stainless Steel Self-Venting Lockable Ball Valve

Product Code Size $ PriceBVSSSVL06 ¼” 84.04

BVSSSVL10 ⅜” 84.04

BVSSSVL15 ½” 93.94

BVSSSVL20 ¾” 117.77

BVSSSVL25 1” 160.38

BVSSSVL32 1¼” 220.26

BVSSSVL40 1½” 328.50

BVSSSVL50 2” 458.00

Venting Safety Lock-out Quick Exhaust Valve

� Shut off valve for closing � ow to or from FRL units

� 3 port / 2 position valve relieves downstream pressure when closed

� Can be locked in the closed position � Threaded ports also allow use in-line with other components

� Accepts standard single pad lock or safety lock for multiple lockout

� Maximum pressure: 150 psi

Model Size Vent sizeNominal Pressure $ Price

UVHS3000-02-X1 ¼” ¼” 145 psi 42.02

UVHS3000-03-X1 ⅜” ¼” 145 psi 42.02

UVHS4000-03-X1 ⅜” ⅜” 145 psi 58.82

UVHS4000-04-X1 ½” ⅜” 145 psi 58.82

UVHS5000-06-X1 ¾" ½" 145 psi 116.81

UVHS5000-10-X1 1” ½" 145 psi 116.81

Foot Valve

Product code Description $ PriceBFV15 ½” Foot Valve 12.14

BFV20 ¾” Foot Valve 16.17


BFV32 1¼” Foot Valve 28.12






Spring Check Valve

Product code Description $ PriceNRV10Y 3⁄8” Spring Check Valve 9.24

NRV15Y ½” Spring Check Valve 9.24

NRV20Y ¾” Spring Check Valve 11.75

NRV25Y 1” Spring Check Valve 15.79

NRV32Y 1¼” Spring Check Valve 24.64

NRV40Y 1½” Spring Check Valve 33.50


NRV65Y 2½” Spring Check Valve 103.95



Swing Check Valve


BCHVSW15 ½” Swing Check Valve 11.18

BCHVSW20 ¾” Swing Check Valve 15.99


BCHVSW32 1¼” Swing Check Valve 35.42






For pricing & availability on the Mine Ball Valve range


Vent Ori� ce

261VALVES

Ball ValvesAGA / Watermark Dual Approved Ball Valves with lockable handle

Product Code Size $ PriceBVDA15FL ½” 15.03

BVDA20FL ¾” 20.17

BVDA25FL 1” 36.30

BVDA32FL 1¼” 54.82

BVDA40FL 1½” 87.45

BVDA50FL 2” 137.87

AGA / Watermark Dual Approved Ball Valve with Brass BRH lockable handle

Product Code Size $ PriceBVDA15BL ½” 35.20

BVDA20BL ¾” 49.87

Stainless Steel Ball Valve1 Piece (Lockable)

Product Code Size $ PriceSS1BV08 ¼” 29.58

SS1BV10 ⅜” 29.58

SS1BV15 ½” 37.77

SS1BV20 ¾” 47.19

SS1BV25 1” 66.80

SS1BV32 1¼” 94.08

SS1BV40 1½” 108.13

SS1BV50 2” 170.02



SS2BV10 ⅜” 41.12

SS2BV15 ½” 43.31

SS2BV20 ¾” 61.15

SS2BV25 1” 87.78

SS2BV32 1¼” 129.22

SS2BV40 1½” 180.91

SS2BV50 2” 290.93

SS2BV65 2½” 550.82

SS2BV80 3” 843.41

SS2BV100 4” 1,615.25



SS3BV10 ⅜” 57.57

SS3BV15 ½” 80.76

SS3BV20 ¾” 97.54

SS3BV25 1” 137.48

SS3BV32 1¼” 190.46

SS3BV40 1½” 246.79

SS3BV50 2” 412.79

SS3BV65 2½” 761.29

SS3BV80 3” 1,058.01

SS3BV100 4” 2,224.22

260 VALVES78 79VALVES VALVES

Compressed Air Quick CouplersCEJN 320 SeriesQuick Release CouplersFemale Threaded Socket

Product Code Size $ Price CJ3201202 ¼” 30.28

CJ3201204 ⅜” 30.28

CJ3201205 ½” 31.48

Male Threaded Socket


CJ3201154 ⅜” 30.28

CJ3201155 ½” 31.48

Hose Socket

Product Code Size $ Price CJ3201002 ¼” hose 30.28

CJ3201004 ⅜” hose 30.28

CJ3201005 ½” hose 31.25

Female Threaded Plug


CJ3205204 ⅜” 7.00

CJ3205205 ½” 12.95

Male Threaded Plug


CJ3205154 ⅜” 5.95

CJ3205155 ½” 10.20

Hose Plug


CJ3205004 ⅜” hose 5.45

CJ3205005 ½” hose 5.45

CEJN 315 SeriesQuick Release Couplers(Nitto compatible)Female Threaded Socket


CJ3151104 ⅜” 16.60

CJ3151105 ½” 17.73



CJ3151154 ⅜” 14.58

CJ3151155 ½” 13.68

Hose Socket


CJ3151004 ⅜” hose 14.03

CJ3151005 ½” hose 14.03


313QUICK COUPLERS

Compressed Air Quick CouplersNitto Hi Cupla 200 SeriesQuick Release Couplers”One Touch” Just push-in

Female Thread Connection - Socket

Product Code Size $ Price 200-20SF ¼” 18.67

200-30SF ⅜” 18.67

200-40SF ½” 18.67

Male Threaded Connection - Socket

Product Code Size $ Price 200-20SM ¼” 18.67

200-30SM ⅜” 18.67

200-40SM ½” 18.67

Hose Socket

Product Code Size $ Price 200-20SH ¼” hose 18.67

200-30SH ⅜” hose 18.67

200-40SH ½” hose 18.67

Nitto Hi Cupla SeriesQuick Release CouplersFemale Threaded Socket

Product Code Size $ Price 20SF ¼” 15.67

30SF ⅜” 17.23

40SF ½” 21.47


Product Code Size $ Price 20SM ¼” 15.67

30SM ⅜” 17.23

40SM ½” 18.80

Hose Socket

Product Code Size $ Price 20SH ¼” hose 15.67

30SH ⅜” hose 17.23

40SH ½” hose 18.80


Product Code Size $ Price 20PF ¼” 5.47

30PF ⅜” 6.73

40PF ½” 11.90

Male Threaded Plug

Product Code Size $ Price 20PM ¼” 6.43

30PM ⅜” 6.73

40PM ½” 8.93

Hose Plug

Product Code Size $ Price 20PH ¼” hose 5.47

30PH ⅜” hose 6.73

40PH ½” hose 8.93

312 QUICK COUPLERS80 81QUICK COUPLERS QUICK COUPLERS

CEJN Breathing Air342 SeriesQuick Release Couplers

SAFETY Venting couplingsFemale Threaded Socket


CJ3421204 ⅜” 66.50

CJ3421205 ½” 70.08



CJ3421154 ⅜” 65.33

CJ3421155 ½” 66.50

Hose Socket


CJ3421004 ⅜” hose 62.95

CJ3421005 ½” hose 65.33



CJ3425204 ⅜” 16.05

CJ3425205 ½” 212.14

Male Threaded Plug


CJ3425154 ⅜” 13.65

CJ3425155 ½” 19.00

Hose Plug


CJ3425004 ⅜” hose 8.90

CJ3425005 ½” hose 10.10

JAMEC-PEMFemale Threaded Socket

Product Code Size $ Price JP310F4 ¼” BSP 20.03

JP310F6 ⅜” BSP 25.88

JP310F8 ½” BSP 25.88


Product Code Size $ Price JP310M4 ¼” BSP 22.28

JP310M6 ⅜” BSP 22.28

JP310M8 ½” BSP 25.28

Hose Socket

Product Code Size $ Price JP310T4 ¼” 22.80

JP310T6 ⅜” 22.80

JP310T8 ½” 22.80

Compressed Air Quick Couplers

315QUICK COUPLERS



CJ3155104 ⅜” 3.50

CJ3155105 ½” 7.40

Male Threaded Plug


CJ3155154 ⅜” 2.93

CJ3155155 ½” 5.60

Hose Plug


CJ3155004 ⅜” hose 3.70

CJ3155005 ½” hose 4.95

CEJN eSafe SeriesQuick Release Couplers (Nitto compatible)

SAFETY Venting couplingsImages are indicative only

Female Threaded Socket


CJ3152104 ⅜” 36.05

CJ3152105 ½” 36.05



CJ3152154 ⅜” 36.05

CJ3152155 ½” 36.05

Hose Socket


CJ3152004 ⅜” hose 36.05

CJ3152005 ½” hose 36.05



CJ3155104 ⅜” 3.50

CJ3155105 ½” 7.40

Male Threaded Plug


CJ3155154 ⅜” 2.93

CJ3155155 ½” 5.60

Hose Plug


CJ3155004 ⅜” hose 3.70

CJ3155005 ½” hose 4.95



314 QUICK COUPLERS82 83QUICK COUPLERS QUICK COUPLERS

Hose Reels

Ultramax Retractable Hose ReelsAir & Water ReelsHose: Braided PVCUse: Air or WaterPressure: 16 barMax. Temperature: 65 ˚C

¡ Ultramax AW series hose reels are ideal for the general workshop applications such as compressed air or water wash–down.

¡ Keeps hoses neat and tidy preventing hazards.

¡ Australian Made

Product Code Hose ID Hose Length Max PSI $ Price Inlet Fitting Male Outlet Fitting Temp Range Weight

AW815 8mm 15m 240 291 ⅜” BSPF ⅜” BSPM -5ºC to 65ºC 11Kg




AW1215 12mm 15m 240 291 ½” BSPF ½” BSPM -5ºC to 65ºC 12Kg

AW1218 12mm 18m 240 456 ½” BSPF ½” BSPM -5ºC to 65ºC 12Kg

Heavy Duty Air reel model AWHD121 0 fi tted with EPDM Rubber hose.

Ideal for air applications in fabrication areas where welding spatter adversely aff ects standard hoses.

Product Code Hose ID Hose Length Max PSI $ Price Inlet Fitting Male Outlet Fitting Temp Range WeightAWHD1210 12mm 10m 240 566 ½” BSPF ½” BSPM -5ºC to 65ºC 12Kg

Spiral Hose and tool not included.This is an EXAMPLE only

Breathing Air Hose ReelsMedia Breathing airMinimum temp -5˚cMaximum temp 60˚cMax PSI 240*Fitting type BSP**Weight 12kg

*Maximum working pressure of the hose is based on 30 ˚C.**NPT, JIC, JIS and Metric threads available on request.

BD Series Breathing Air Hose Reel

Code Description $ Price

BD820 8mm BD Series Breathing Air Hose Reel, ⅜” BSPF, 20m 755

BD1020 10mm BD Series Breathing Air Hose Reel, ⅜” BSPF, 20m 755

BD SERIES

Model Hose ID Hose Length Inlet Fitting Outlet Fitting

BD820 8mm 20m ⅜ BSPF ⅜ BSPM

BD1020 10mm 20m ⅜ NPTF ⅜ BSPM

329HOSE



JP31F2 ⅛” BSP 5.30

JP31F4 ¼” BSP 5.30

JP31F6 ⅜” BSP 7.90

Male Threaded Plug


JP31M2 ⅛” BSP 4.00

JP31M4 ¼” BSP 4.30

JP31M6 ⅜” BSP 6.30

Hose Plug

Product Code Size $ Price JP31T4 ¼” 4.40

JP31T6 ⅜” 4.40

JP31T8 ½” 5.90

Hose Assemblies

Crimped hose fi tted with Nitto 200 Series socket and plug.Meets AS2554 Class B. Lightweight, Non-Conductive and Non-Marking advanced hose. UV Stabilised.Cuplas made in Japan, Hose made in USA.

Product Code Hose Length (m) Hose Size (mm) $ PriceFHA1010 10 10 78.17

FHA2010 20 10 117.50

FHA3010 30 10 157.00

FHA1012 10 12 114.17

FHA2012 20 12 168.33

FHA3012 30 12 246.67

Spiral Hose (Self Store Hoses)

Includes Nitto 200 Series Socket and Plug

Product CodeWorking Length

Tube Size OD & ID (mm) $ PriceHA0803 2m 8 × 5 86.47

HA0805 4m 8 × 5 96.50

HA0808 6m 8 × 5 112.17

HA0810 8m 8 × 5 123.30

HA1003 2m 10 × 6.5 90.87

HA1005 4m 10 × 6.5 105.73

HA1008 6m 10 × 6.5 131.30

HA1010 8m 10 × 6.5 148.37

HA1203 2m 12 × 8 105.73

HA1205 4m 12 × 8 121.40

HA1208 6m 12 × 8 154.30

HA1210 8m 12 × 8 178.13

Spiral Hose (Self Store Hoses)

Includes ¼” BSP Threaded Male fi tting - Add your own quick coupler.

Product CodeWorking Length

Tube Size OD & ID (mm) $ PriceHA0803 2m 8 × 5 46.53

HA0805 4m 8 × 5 56.40

HA0808 6m 8 × 5 72.07

HA0810 8m 8 × 5 83.03

HA1003 2m 10 × 6.5 51.70

HA1005 4m 10 × 6.5 66.57

HA1008 6m 10 × 6.5 92.13

HA1010 8m 10 × 6.5 109.20

HA1203 2m 12 × 8 71.27

HA1205 4m 12 × 8 86.80

HA1208 6m 12 × 8 119.70

HA1210 8m 12 × 8 143.67

� Stainless Steel Couplers Available

� Large Bore Couplers Available

� Hydraulic Couplers Available


316 QUICK COUPLERS84 85QUICK COUPLERS HOSE REELS

UltraAir Flexi HosesFemale Threaded both ends - Ø 5mm I.D.

Product Code Description $ PriceFLEX150FF 150mm (6”) ½” BSP for compressed air & water 14.40

FLEX225FF 225mm (9”) ½” BSP for compressed air & water 15.20











Female to Male Threads - Ø 5mm I.D.

Product Code Description $ PriceFLEX150FM 150mm (6”) ½” BSP FI - MI for compressed air & water 14.40

Female thread both ends with Elbow - Ø 5mm I.D.

Product Code Description $ PriceFLEX300EF 300mm (12”) ½’ BSP for compressed air & water 21.20

FLEX450EF 450mm (18’) ½” BSP for compressed air & water 23.80

FLEX600EF 600mm (24”) ½” BSP for compressed air & water 26.40

Do not compress or extend axiallyFlexi hose should be installed in-line with the long axis of your piping and not be subject to axial movement.

Do not torque the hose during installationFlexi hose assemblies usually include at least one independently moving �tting, so that there is no need to torque the hose during connection.

Do not allow hose movement in multiple planesFlexing a metal hose in two separate planes of movement will torque the hose assembly. Always install the Flexi hose assembly so that any �exing occurs in one plane only - the same plane as any bending occurs.

Avoid sharp bendsUse elbows to avoid severe bends near the ends of the Flexi hose assembly.

Maintain minimum centreline bend radiusThe minimum centreline bend radius for dynamic �exing, should never be less than the values detailed in our product speci�cations

RIGHT WRONG

RIGHT MOVEMENT

MOVEMENT

WRONG

RIGHT WRONG

RIGHT WRONG

RIGHT WRONG

322 HOSE

UltraAir Flexi HosesUltraAir stainless steel braided hoses provide a strong, � exible connection that controls vibration and noise, as well as

accommodating offsets and pipe motion. The rugged braided stainless steel cover helps prevent kinks that can impede � uid � ow.

This connector has a rugged EPDM core, reinforced with braided steel, making this hose extremely strong and capable of handling increased temperature and pressure. Brass hose connectors are permanently attached to prevent leaks, and the swivel end simplifi es installation, fl ushing and draining of piping.

The UltraAir stainless steel braided hoses are available with a variety of connecting end styles:

¡ Female threaded both ends

¡ Female to male threads

¡ Female threaded both ends with elbow

Features and Bene� ts ¡ Thermal expansion and reduce piping stress due

to minor misalignment

¡ Provides protection against abrasion tube cutting or bending, no soldering, no extra adapters, fi ttings or couplings required.

¡ End fi ttings are permanently attached with a superior hydraulic multi-crimp process, these connectors provide reliable protection against vibration

¡ Creates quicker connections

¡ Protects and reduces impact of UV rays in sunlight

¡ Smooth Bore

¡ Compressed Air, Vacuum, Inert Gases

¡ Functional and aesthetic

¡ No brazing, no welding, no cutting or re-shaping, no wastage

¡ Reduction in labour costs

¡ A fl exible and quick alternative for rigid piping in diffi cult locations

� We can customise the fl exible connectors to suit any application.

* Other fl exible hoses made to order. � Stainless Flexi droppers for pendant outlets can be

made to order.

Uses ¡ Pipe to dropper

¡ Hose drops

¡ Flex to FRLs

¡ Flex to drains

¡ Up and overs

¡ Connection to machinery

¡ Compressor outlets (absorption of vibration)

¡ To bypass obstacles and join diff erent levels

¡ Expansion loops

¡ Wall to compressor

¡ To hose reel

¡ For quick assembly of airlines

¡ For in cable tray to instruments

¡ For fi lter drains to wall mount

¡ For extension loops

¡ Flex to fi lters

¡ To air pump

¡ For expansion loops

¡ Easily removable

� See page 312 for Quick Couplers

� See page 132 for Claw Couplings

320 HOSE86 87HOSE HOSE

(Push-in) Pneumatic Tube & FittingsPush-in Male Threaded Coupler

Product Code $ PricePFC-M6 5.24

PFC-M8 6.46

PFC-M10 8.01

PFC-M12 8.58

PFC-M16 14.47

Push-In Elbow

Product Code $ PricePFE-M6 5.17

PFE-M8 7.24

PFE-M10 7.96

PFE-M12 9.79

Push-In Tee

Product Code $ PricePFT-M6 7.96

PFT-M8 9.18

PFT-M10 10.41

PFT-M12 11.97

PFT-M16 12.98

Push-in Bulkhead Union

Product Code $ PricePFBHU-M6 18.92

PFBHU-M8 22.04

PFBHU-M10 26.96

PFBHU-M12 29.98

Push-in Male Threaded Adaptor

Product Code $ PricePFMA-M6-1/8 4.28

PFMA-M6-1/4 4.40

PFMA-M6-1/2 6.45

PFMA-M8-1/8 5.84

PFMA-M8-1/4 5.51

PFMA-M8-1/2 5.96

PFMA-M10-1/8 7.60

PFMA-M10-1/4 7.60

PFMA-M10-1/2 7.95

PFMA-M12-1/8 8.15

PFMA-M12-1/4 9.58

PFMA-M12-1/2 11.97

Push-In Male Threaded Elbow

Product Code $ PricePFEM-M6-1/8 8.58

PFEM-M6-1/4 8.58

PFEM-M8-1/8 9.18

PFEM-M8 × 1/4 9.18

PFEM-M8-1/2 9.89

PFEM-M10-1/8 12.24

PFEM-M10-1/4 12.24

PFEM-M10-1/2 13.95

PFEM-M12-1/4 14.88

PFEM-M12-1/2 14.88

Push-In Reducer

Product Code $ PricePFRA-8M-6M 4.74

PFRA-10M-6M 4.74

PFRA-10M-8M 4.89

PFRA-12M-8M 6.98

PFRA-12M-10M 6.98

Push-in Female Threaded Tee

Product Code $ PricePFTF-M8-1/4 7.14

PFTF-M8-3/8 9.15

PFTF-M8-1/2 9.15

PFTF-M10-1/8 11.02

PFTF-M10-1/4 11.02

PFTF-M10-1/2 13.12

PFTF-M12-1/8 14.99

PFTF-M12-1/4 14.99

PFTF-M12-1/2 15.23

PFTF-M16-1/2 19.98

Pneumatic Tube - roll (blue, opaque white, black)

Product Code $ PricePNEUT06 (200m) 180

PNEUT08 (100m) 160

PNEUT10 (100m) 220

PNEUT12 (100m) 320

PNEUT16 (300m) 795

Pneumatic Tube - cut to length (blue, opaque white, black)

Product Code $ Price/mPNEUT06 - Cut to Length 1.80

PNEUT08 - Cut to Length 3.20





249PNEUMATICS

Industrial Air Tool Hose YS (AS 2554 Class B)

Industrial Air Tool Hose YS (AS 2554 Class B) air hose is specifi cally designed for air tool applications such as staple machines, air screw drivers, car type pump hose, nail guns and pneumatic tools. The hose is tough and abrasion resistant, yet extremely fl exible so as to ensure maximum reduction in operator wrist strain.

All the stringent requirements of AS 2554 Class B are met by the Industrial Air Tool Hose YS

¡ All Australian made

¡ Ease of handling in extreme cold conditions

¡ Manufactured from oil resistant compounds

¡ High abrasion resistance for long life

¡ Good weathering properties

¡ 4:1 safety factor allowing for pressure surges

¡ Blue cover denoting air line

¡ Identifi able by bright Yellow stripe

¡ Meets Australian standard AS 2554 Class B

Industrial Air Tool Hose YS (AS 2554 Class B) - Cut to Length

Product CodeI.D

(mm)O.D

(mm)

Working Pressure @20 ˚C

Min.Burst Pressure @20 ˚C

$ Priceper metre

AHYB10YASCTL 10 16.6 232 psi (16 bar) 6.4 MPa 3.78

AHYB12YASCTL 12.5 19.1 232 psi (16 bar) 6.4 MPa 5.91

Industrial Air Tool Hose YS (AS 2554 Class B) - 16.6mm Roll

Product CodeI.D

(mm)O.D

(mm)



Roll Length(m) $ Price

AHYB10YAS20 10 16.6 232 psi (16 bar) 6.4 MPa 20 62.96




Industrial Air Tool Hose YS (AS 2554 Class B) - 16.6mm Reel

Product CodeI.D

(mm)O.D

(mm)



Reel Length(m) $ Price


Industrial Air Tool Hose YS (AS 2554 Class B) - 19.1mm Roll

Product CodeI.D

(mm)O.D

(mm)



Roll Length(m) $ Price

AHYB12YAS20 12.5 19.1 232 psi (16 bar) 6.4 MPa 20 98.52




Industrial Air Tool Hose YS (AS 2554 Class B) - 19.1mm Reel

Product CodeI.D

(mm)O.D

(mm)



Reel Length(m) $ Price

AHYB12YAS300 12.5 19.1 232 psi (16 bar) 6.4 MPa 300 1,477.78

Air Hose


325HOSE

Air Hose Pneumatic Tube Fittings

88 89HOSE PNEUMATIC FITTINGS

G Series - Red Aluminium Range - Technical Speci� cations

Housing Model

Connection Sizes

Flow RateMax Working

Pressure Housing Dimensions (mm)Element Modelm³/h scfm bar A B C D E

G20M ¼” 20 12 20 / 290 psi 75 195.5 177.5 125 36.5 M20, M24

G40M ⅜” 40 24 20 / 290 psi 75 195.5 177.5 125 36.5 M40, M48

G50M ⅜” 50 29 20 / 290 psi 102 219.5 197.5 125 45 M50

G100M ½” 100 59 20 / 290 psi 102 257.5 235.5 165 45 M100

G150M ¾” 150 88 20 / 290 psi 123 302.5 275.5 205 45 M150

G200M ¾” 200 118 20 / 290 psi 123 366.5 339.5 265 45 M200

G250M 1” 250 147 20 / 290 psi 123 392.5 379.5 315 45 M250

G300M 1” 300 177 20 / 290 psi 123 463 427.5 365 45 M300

G500M 1¼” 500 294 20 / 290 psi 123 493 457.5 395 45 M500

G600M 1½” 600 353 20 / 290 psi 123 538 502.5 440 45 M600

G851M 2” 851 501 20 / 290 psi 160 625.5 583.8 495 45 M851

G1210M 2” 1,210 712 20 / 290 psi 160 695.5 653.8 565 45 M1210

G1520M 2½” 1,520 895 20 / 290 psi 194 730 672 445 45 M1520

G1820M 3” 1,820 1,071 20 / 290 psi 194 870 813 565 45 M1820

G2220M 3” 2,220 1,307 20 / 290 psi 194 924 867 615 45 M2220

G2620M 3” 2,620 1,540 20 / 290 psi 194 1,068 1,011 695 45 M2620

G Series Filter Element Speci� cation

Speci� cationPre

Filtering General PurposeOil

RemovalActivated

Carbon

Grade P X Y A

Particle Removal (Micron) 5 1 0.01 0.01

Max. Oil carry-over at 21 ˚C (mg/m³) 5 0.05 0.01 0.003

Max. working temperature (˚C) 120 120 120 50

Initial Pressure Loss (mbar) 40 80 100 80

Pressure Loss for element Change (mbar) 700 700 700 700

Max working pressure (barg) 20 20 20 20

Correction FactorOperating Pressure (bar) 1 3 5 7 9 11 13 15 16

PSI 15 44 73 100 131 160 189 218 247

Correction Factor 0.5 0.71 0.87 1 1.12 1.22 1.32 1.44 1.57

� For maximum fl ow rate, multiply model fl ow rate shown on the technical specifi cations table by the correction factor corresponding to the working pressure.

Notes � Grade A must not operate in oil saturated conditions.

� Grade A elements should be replaced periodically to suit your application. At least every six months.

� Grade A will not remove certain gases including carbon monoxide and carbon dioxide.

� Flow rates are based on a 7 bar operating pressure.For fl ows at other pressures use correction factor given above.

� All fi lters are suitable for use with mineral and synthetic oils.

� All fi lters are conform with the Pressure Equipment Directive (97/23/EC).

� Direction of fl ow, inside to out, through the fi lter element.

A

E

CB

D

G Series Filters

Flange Kits available for all threaded � lters.BSP threaded standard Available in NPT on request.


Working pressure 20 bar / 290 psiFlow rate 12 to 1,540 scfmMedia: Compressed Air & GasConnections ¼” to 3”Operating temp. 1.0 ˚C to 120 ˚CMaterial Zero Porosity Aluminium

* Housing includes drain, gauge & element

* Corrosion-resistant coating insidePowder-coat fi nish outside

* More port size options ¼” to 3”

FiltrationOur Compressed Air Filters have been designed to remove airborne contamination in compressed air systems, delivering energy effi cient operation and reliable performance.

Due to the use of advanced deep pleating techniques, the fi ltration area has increased remarkably which leads to better fi ltration and higher dirt holding capacity.

FeaturesThe air fi lters have 4 ranges of effi ciencies, removing down to 0.01 micron at up to 235 psi (16 bar) - ¼” to 3” NPT/BSP pipe sizes. A protected auto fl oat drain (2mm orifi ce) is standard - for the reliable removal of liquid contaminants.

The G Series, zero-porosity aluminium housing, with an epoxy powder-coat fi nish and corrosion-resistant internal coating, provides a long service life. These fi lter housings may be equipped with diff erential pressure gauges for easy maintenance and energy effi ciency.

Ultramax compressed air fi lters are always recommended with these systems. Filter combinations are confi gured to meet specifi c application requirements. Filters comply with PED and perform as per related ISO 8573-1:2010 standards.

Applications � Automotive � Laboratories � Mining � Hospitals � Chemical � Petrochemical � Manufacturing � Food & Beverage � Paint � General Industrial � Diving

G Series Filters Compressed Air & Gas


G Series Filters G Series - Red Aluminium Range - PRE FILTERING (5 µm)

Pre Filtering

$ PricePort Sizes

Flow Rate Max Oper.Pre

Filtering

$ PriceHousing Model m³/h scfm bar

Element Model

G20MP 215 ¼” 20 12 20 M20P 105

G40MP 215 ⅜” 40 24 20 M40P 116

G50MP 260 ⅜” 50 30 20 M50P 151

G100MP 295 ½” 100 58 20 M100P 163

G150MP 375 ¾” 150 88 20 M150P 210

G200MP 395 ¾” 200 117 20 M200P 279

G250MP 490 1” 250 147 20 M250P 302

G300MP 550 1” 300 176 20 M300P 340

G500MP 695 1¼” 500 294 20 M500P 361

G600MP 845 1½” 600 353 20 M600P 489

G851MP 1,075 2” 851 500 20 M851P 582

G1210MP 1,085 2” 1,210 712 20 M1210P 651

G1520MP 1,495 2½” 1,520 930 20 M1520P 674

G1820MP 1,850 3” 1,820 1,140 20 M1820P 767

G2220MP 1,950 3” 2,220 1,307 20 M2220P 930

G2620MP 2,375 3” 2,620 1,540 20 M2620P 1,120

G Series - Red Aluminium Range - GENERAL PURPOSE (1 µm)

General Purpose

$ PricePort Sizes

Flow RateMaxOper.

General Purpose


Element Model

G20MX 215 ¼” 20 12 20 M20X 105

G40MX 215 ⅜” 40 24 20 M40X 116

G50MX 260 ⅜” 50 30 20 M50X 151

G100MX 295 ½” 100 58 20 M100X 163

G150MX 375 ¾” 150 88 20 M150X 210

G200MX 395 ¾” 200 117 20 M200X 279

G250MX 490 1” 250 147 20 M250X 302

G300MX 550 1” 300 176 20 M300X 340

G500MX 695 1¼” 500 294 20 M500X 361

G600MX 845 1½” 600 353 20 M600X 489

G851MX 1,075 2” 851 500 20 M851X 582

G1210MX 1,085 2” 1210 712 20 M1210X 651

G1520MX 1,495 2½” 1,520 930 20 M1520X 674

G1820MX 1,850 3” 1,820 1,140 20 M1820X 767

G2220MX 1,950 3” 2,220 1,307 20 M2220X 930

G2620MX 2,375 3” 2,620 1,540 20 M2620X 1,120

� Filter housing includes auto drain, gauge and element, except activated carbon which has a manual drain and no gauge

G Series - Red Aluminium Range - OIL REMOVAL (0.01 µm)

OilRemoval

$ PricePort Sizes

Flow RateMaxOper.

OilRemoval


Element Model

G20MY 215 ¼” 20 12 20 M20Y 105

G40MY 215 ⅜” 40 24 20 M40Y 116

G50MY 260 ⅜” 50 30 20 M50Y 151

G100MY 295 ½” 100 58 20 M100Y 163

G150MY 375 ¾” 150 88 20 M150Y 210

G200MY 395 ¾” 200 117 20 M200Y 279

G250MY 490 1” 250 147 20 M250Y 302

G300MY 550 1” 300 176 20 M300Y 340

G500MY 695 1¼” 500 294 20 M500Y 361

G600MY 845 1½” 600 353 20 M600Y 489

G851MY 1,075 2” 851 500 20 M851Y 582

G1210MY 1,085 2” 1,210 712 20 M1210Y 651

G1520MY 1,495 2½” 1,520 930 20 M1520Y 674

G1820MY 1,850 3” 1,820 1,140 20 M1820Y 767

G2220MY 1,950 3” 2,220 1,307 20 M2220Y 930

G2620MY 2,375 3” 2,620 1,540 20 M2620Y 1,120

G Series - Red Aluminium Range - ACTIVATED CARBON (0.01 µm)

Activated Carbon

$ PricePort Sizes

Flow RateMaxOper.

Activated Carbon


Element Model

G20MA 215 ¼” 20 12 20 M20A 105

G40MA 215 ⅜” 40 24 20 M40A 116

G50MA 260 ⅜” 50 30 20 M50A 151

G100MA 295 ½” 100 58 20 M100A 163

G150MA 375 ¾” 150 88 20 M150A 210

G200MA 395 ¾” 200 117 20 M200A 279

G250MA 490 1” 250 147 20 M250A 302

G300MA 550 1” 300 176 20 M300A 340

G500MA 695 1¼” 500 294 20 M500A 361

G600MA 845 1½” 600 353 20 M600A 489

G851MA 1,075 2” 851 500 20 M851A 582

G1210MA 1,085 2” 1,210 712 20 M1210A 651

G1520MA 1,495 2½” 1,520 930 20 M1520A 674

G1820MA 1,850 3” 1,820 1,140 20 M1820A 767

G2220MA 1,950 3” 2,220 1,307 20 M2220A 930

G2620MA 2,375 3” 2,620 1,540 20 M2620A 1,120

30 FILTRATION PRODUCTS

G Series & F Series AccessoriesHousing Brackets ( G Series only)

Product Code Housing Model $ Price

BRG50-100 G50 - G100 57

BRG20-40 G20 - G40 40

BRG100 G100 57

BRG150 G150 72

BRG150-300 G150 - G300 72

BRG1210 G1210 210

BRG1510 G1510 110

BRG1810 G1810 358

BRG2210 G2210 378

BRG1510-2620 G1510 - G2620 110

Housing Connecting Clamps ( G Series only)

Product Code Housing Model $ Price

FCC-1 G25 - G100 80

FCC-2 G150 - G300 130

FCC-3 G500 - G600 160

FCC-4 G851 - G1210 288

FCC-5 G1550 - G2300 380

Differential Pressure Gauges( G Series & F Series)(Excludes G20 and G40)


MPKG (0 - 700 MBAR) to suit Old G Series Housings 145

MPKGN (0 - 700 MBAR) to suit New G Series Housings 145

MPKG (Contacts) with voltage free contacts 195

Drain Kit (Male)


MDK08 ¼” (13mm) 33.10

MDK10 ⅜” (17mm) 36.75

MDK15 ½” (21mm) 45.00

Drain Kit (Female)


MDK08F ¼” (13mm) 33.10

MDK10F ⅜” (17mm) 41.75

MDK15F ½” (21mm) 45.00

Drain Adapter Fitting


UMDVX400A ⅜” (17mm) 47.00

Bracket Set Clamp Set

Drain Kit with ball valve (Male)


MDBVK08 ¼” (13mm) 45.60

MDBVK10 ⅜” (17mm) 50.00

MDBVK15 ½” (21mm) 54.00

Drain Kit with ball valve (Female)


MDBVK08F ¼” (13mm) 45.60

MDBVK10F ⅜” (17mm) 50.00

MDBVK15F ½” (21mm) 54.00

� See page 248 for tube connection fi ttings. See page 197 for condensate systems.


Water Separators Technical Speci� cations of Ultramax Twister Dryer Turbo Water Separators

Model Port Sizes

Flow Rate Housing Dimensions (mm)

$ Pricem³/h scfm A B C DG25WS ¼” 25 15 102 257 235 155 243

G100WS ½” 100 59 102 257 235 200 243

G200WS ¾” 200 118 123 280 253 270 325

G300WS 1” 300 178 123 280 245.5 370 412

G600WS 1½” 600 353 123 295 259.5 460 485

G1200WS 2” 1,210 712 160 481 440 565 965

G2200WS 3” 2,210 1,300 194 547 490.5 585 1,680

Maximum recommended operating temperature 80 ˚C

Minimum recommended operating temperature 1.5 ˚C

Typical pressure loss at rated � ow 50 mbar

Maximum working pressure 20 bar

Correction Factor

Operating Pressure (bar) 1 3 5 7 9 11 13 15 16

PSI 15 44 73 100 131 160 189 218 247

Correction Factor 0.5 0.71 0.87 1 1.12 1.22 1.32 1.44 1.57

� For maximum fl ow rate, multiply model fl ow rate shown on the ‘Technical specifi cations’ table (above) by the correction factor corresponding to the working pressure.

A

CB

D

Manual Drain (20 bar)UMDVX400

Page 207

“Ball” Drain (16 bar)MDTOT-B-01

Page 217

Drain Valve Kit(16 bar)Page 34

Auto-Drain (20 bar)UMADV400-G

Page 207

included standard with G Series � lter housings

Timed Solenoid Drain(16 bar or 50 bar)Page 220

“Football” (20 bar) Auto-DrainPage 216

Nil Loss Drain(16 bar)Page 219

Thermodynamic Steam Trap(40 bar)Page 226

NPT Available on request


Water SeparatorsUltramax Twister Dryer Turbo Water SeparatorWorking pressure 20 bar / 290 psi Flow rate 15 to 1300 scfm Port Sizes ¼” to 3” Operating temp. 1.5 ˚C to 80 ˚C Material Zero Porosity Aluminium

* Automatic Drain Valves fi tted as standard

* Zero-porosity aluminium housing

* Powder coated fi nish inside and out

* More port size options

* Centrifugal separation removes up to 99% of water aerosol in compressed air.

Also called mechanical separators, centrifugal separators use cyclonic motion to force liquid water out of compressed air. The spinning causes the condensate to join together on the separator walls.

When the condensate gains enough mass it falls to the bottom of the separator bowl, pooling in the sump. It is then fl ushed out of the system by the automatic fl oat drain valve.

Remove condensates to avoid corrosion of exposed metal components throughout your compressed air system. Providing protection for critical tools and equipment!

Centrifugal water separators are installed downstream of after-coolers and air receivers. Our Twister Dryer Turbo Separator design features an internal spinner that removes large quantities of condensate by cyclonic action.

Applications � Automotive � Laboratories � Mining � Hospitals� Chemical � Petrochemical � Manufacturing � Food & Beverage � Paint � General Industrial � Diving

Flange Kits available for all threaded separators


UltraAir Installation GuidelinesTHERMAL EXPANSION AND CONTRACTION PIPE CLIPS / PIPING LAYOUTThe coefficient of the thermal expansion and contraction of UltraAir PE100 pipe may be taken as 0.18mm per metre per °C. If pipework is to be subjected to thermal temperature change, expansion and contraction needs to be considered for during installation. Generally movement can be absorbed on changes of direction, elbows, etc. but on longer lengths the recommended installation principles as set out below should be adhered to. This movement is minimised if areas in which pipework is installed are heated or cooled and virtually eliminated in constant temperature areas.

EXPANSION LOOPSExpansion loops are recommended at intervals of approx. 30-40m on long runs. Suggested leg lengths are as per table below. It is general practice for loops up to AIR 63 to span between purlins.

PRE STRESSINGSpace constraints may also need to be considered. Please contact our technical department for accurate sizing if required.

ANCHOR POINTSAnchor points are clips which don’t allow free axial movement. Anchor points can be used as shown to evenly spread the effects of expansion and contraction.

RING MAINBelow is a working example of Ring Main showing typical expansion loops and anchor point positions for this schematic.

PIPE CLIPSFree axial movement of pipework should be allowed with any form of support. Pipework should be able to move on elbows, tees, etc. Loosely clipped pipe can be a safety hazard. Ensure all pipework is adequately clipped to ensure that pressurised piping is properly restrained.

SUGGESTED L s LENGHT (METERS) 20 0.5

25 0.6

32 0.7

40 0.9

50 1.0

63 1.2

90 1.8

110 2.0

160 2.4

UltraAir Installation GuidelinesSHORT TERM TEMPERATURE RISESTemperatures quoted relate to constant temperature over a period of 50 years, rather than short term peak temperatures. UltraAir PE100 can safely handle short term peaks in compressed air temperature up to 95 °C. Circumstances vary and each high temperature application should be checked with our Technical Department.

GUARANTEEUltraAir is manufactured in accordance to AS 4130/AS 4131 and is accordingly guaranteed for 50 years provided recommended design, installation and operating practices are adopted. As established from long term testing, UltraAir may be operated continuously under pressure for up to 200 years at 20 deg °C.

SAFETY FACTORUltraAir PE100 is manufactured with a safety factor of 2. On a typical installation this gives an effective safety factor of 4 at 800 kpa / 20 °C / 50 years.

Design Factors System pressure capabilities have been derived using a safety factor of 2. Energy stored in compressed air and the potential for pressure spikes means that the pressure rating is less than that for water, for which the safety factor is 1.25.

PRESSURE/FLOW TABLE Maximum recommended air flow for each pipe size.Pressure AIR20 AIR25 AIR32 AIR40 AIR5O AIR63 AIR90 AIR110 AIR160

BAR PSI I/sec cfm I/sec cfm I/sec cfm I/sec cfm I/sec cfm I/sec cfm I/sec cfm I/sec cfm I/sec cfm3 43.5 7 15 14 30 28 59 48 101 88 186 174 370 475 1,006 781 1,654 2,195 4,652

4 58 10 21 20 42 39 83 67 141 122 259 243 515 661 1,401 1,087 2,303 3,056 6,476

5 72.5 13 28 26 55 50 107 86 182 158 335 314 665 855 1,811 1,405 2,977 3,950 8,371

6 87 16 34 32 68 62 132 106 225 195 413 387 820 1,054 2,233 1,732 3,671 4,872 10,323

7 102 19 41 38 81 74 157 127 268 233 494 462 980 1,258 2,667 2,068 4,383 5,816 12,326

7.5 109 21 44 41 87 80 170 137 291 252 534 500 1,060 1,362 2,887 2,239 4,745 6,297 13,343

8 116 22 47 44 94 87 184 148 313 272 576 539 1,142 1,467 3,109 2,412 5,111 6,782 14,372

10 145 29 61 57 122 112 237 191 405 351 744 697 1,476 1,896 4,019 3,117 6,606 8,766 18,576

13 189 39 83 78 164 151 321 258 547 475 1,006 942 1,996 2,564 5,434 4,215 8,933 11,853 25,118

PERMISSIBLE SYSTEM OPERATING PRESSURE (KPA) - COMPRESSED AIR PIPE

Temp Co PN 10 PN 12.5 PN 16 PN 20 PN 25

20 630 800 1000 1250 1600

25 620 780 990 1240 1540

30 590 750 940 1180 1470

35 560 710 890 1120 1390

40 530 670 840 1060 1320

45 500 630 800 1000 1250

50 480 680 750 950 1150

55 450 680 750 950 1150

60 400 550 700 900 1100

65 400 500 650 800 1000

70 375 470 600 750 925

Calculation of Maximum Allowable Operating PressureMAOP = 2 x MRS / (c x f1 x (SDR-1))

Where: Minimum Required Strength (MRS) is a material property defined in AS/NZS 4130, c = 2 (safety factor for compressed air) f1 = temperature design re-rating factor (taken from the tables above).

CONVERSION FACTORS Pressure Flow

1 psi = 0.069 bar 1 cfm = 0.4719 L/sec

1 kpa = 0.145 psi 1 I/sec = 2.119 cfm

1 bar = 100 kpa 1 m3/min = 35.3147 cfm

1 bar =14.5 psi 1 m3/min = 16.67 L/sec

1 kg/cm2 = 1 bar

Approximate compressor output calculation: 1kw x 1.35 = HP x 4 = CFM for screw compressors. For piston compression some manufactures quotes displacement which needs to be derated by 0.75 to calculate F.A.D. Size of receivers shall be calculate as 10 times the flow in i/s optimum or 6 times the flow in i/s minimum.

96 97

DSFilt-David

UltraAir Installation GuidelinesSOCKET FUSION WELDED FITTINGSPipe and fittings are welded by means of socket fusion according to AS2033-1980. Fittings comply with DIN16963. These specially engineered fittings, in dimensions and tolerances to co-ordinate with pipe, are heated simultaneously with pipe then joined to give an extremely strong weld of high pressure capability, fusing pipe and fitting into one integral piece.

ELECTRO FUSION WELDED FITTINGSFittings for electro fusion comply with AS4129 and carry a standards mark licence under a Quality Assurance System in accordance with ISO 9002. The fittings incorporate a resistor in one of the terminals which is specific to that fitting. The automatic control box reads the resistor and sets and welds the correct time, avoiding operator error. Fittings are also labelled for barcode reading and manual setting times. Rising melt indicators confirm successful completion of weld.

COMPRESSION O-RING TYPE FITTINGSCompression fittings manufactured under ISO 9002 Quality System and have Standards Mark Licence No 2018-AS4129. Air seal is provided by a heavy duty O-Ring and pipe is securely held by split grip ring and nut. Extensive research and experience has confirmed our confidence in the range of fittings offered being of the highest quality and reliability. These fittings are approved by the manufacturer for compressed air applications and, whilst they are conservatively rated at PN16 (16 bar)/ 20 °C / 50 years for other applications, with a view to an additional safety factor for compressed air, we recommend these fittings for installations subject to conditions not exceeding 10 bar pressure at constant average temperature of 40 °C.

The majority of installations would be expected to average less than these conditions. For conditions above these, fusion welded fittings should be considered.

PIPE WEIGHT COMPARISON UltraAir Galvanised Mild Steel Copper

Size Weight Kg/m Size Weight Kg/m Size Weight Kg/mAIR 20 0.15 1/2” 1.45 1/2” 0.35AIR 25 0.24 3/4” 1.90 3/4” 0.70AIR 32 0.40 1” 2.97 1” 1.09AIR 40 0.59 1 1/4” 3.34 1 1/4” 1.38AIR 50 0.92 1 1/2” 4.43 1 1/2” 1.67AIR 63 1.45 2” 6.17 2” 2.25AIR 90 3.04 3” 10.1 3” 4.23AIR 110 4.51 4” 14.4 4” 5.68AIR 160 9.17 6” 23.33 6” 8.67

UltraAir Installation GuidelinesHAZARDOUS AREASA. Corrosive chemicals – UltraAir has excellent resistance to a broad range of chemicals and is ideal for use in many areas where corrosive liquids or atmosphere may contact the pipe. Compression fittings come standard in polypropylene construction with O-Rings of nitrile rubber and Split Grip Rings in Polyacetal. The Nitrile gives excellent resistance to oils in the compressed air. For aggressive chemical applications CPVC Split Rings and O-Rings in EPDM or Viton are available. Fusion welded fittings provide a further degree of safety in these areas. User should verify compatibility of components with their application. Extensive compatibility charts are available. Resistance to specific chemicals should be checked with Technical Department.

B. Explosive or ignitable atmosphere - Compressed air can carry static charges which may accumulate. The user/customer/purchaser is responsible to identify any potential hazardous areas and to take necessary measures or precautions for complete safety. Information on protective measures is available with advice on your specific application.

HEAT SOURCES AND EXTERIOR PIPEWORK

UltraAir is suitable for outdoor installation. Industry best practice of shielding equipment and pipework from direct heat sources should be adopted to prevent excessive heat build-up. UltraAir pipe is suitable for outdoor installation and for use in full sunlight for up to 100 years without protection.

STORAGE AND TRANSPORTPipe should be stored and transported straight and true.

SHIPPING WEIGHTSDiameter(mm) Weight Per 6m Length Weight Per 100m Coil

20 0.9 Kg / 6m length 15 Kg / 100m Coil






90 18 Kg / 6m length 300 Kg / 100m Coil

110 27 Kg / 6m length 450 Kg / 100m Coil

160 55 kg / 6m length 916 Kg / 100m Coil

CONDENSATE DRAINAGEIdeally, condensate should be removed as soon as possible in the system. A suitably sized compressed air dryer after the Air Receiver is the recommended method for removing condensate from the air supply. If high, short term peaks of dry air are required, then the dryer would be better installed prior to the Receiver. The good thermal characteristics of UltraAir are a further advantage.

The system should be designed to minimise or eliminate harmful condensate from being discharged into air tools and equipment when dryers are not fitted.

Various methods are suitable for this purpose.

� Sloping of horizontal pipe at a slight gradient to strategically positioned drainlegs.

� Outlet droppers to come off the top of the pipework to avoid precipitated condensate being discharged in the airstream.

� In most instances however the recommended method is to install the dropper from the bottom of the branch or mainline with a short extra length of pipe extending below the outlet with a drain valve

UNDERGROUND PIPEWORKUltraAir pipe is ideal for underground installation with its high strength characteristics and ability to absorb ground movement. It is recommended to lay pipework in sand, grade and install drain valves in strategic positions.

PROPER PIPE SUPPORTAll pipework MUST be adequately supported. Use Teflon tape sealant on all treaded connections. We recommend Ultramax PTFE Gas Tape. Do not over tighten threaded fittings. The right way to assemble a threaded fitting is finger tight plus one or two turns – no more.

98 99

DSFilt-David

UltraAir Installation Guidelines

1. Cut pipe to length with appropriate cutter (PC...) for a swarf-free finish.

Compression FittingsAIR90 to AIR110 CL Pipe Clips Installation

Compression FittingsAIR20 to AIR63

PROCEDURE: 1. INSTALL CLIPS & PIPE SUPPORT SYSTEM. 2. FOR SOCKET FUSION PRE-MANUFACTURE MAIN LINES ON GROUND.

1. Cut pipe to length and chamfer. 2, Remove nut, conical grip ring, bushing and ”0” ring and mount on pipe in the same order leaving out grip ring. 3. Lubricate pipe end and inside of fitting.(See note below**)

4. Insert pipe into the fitting until itmeets the internal shoulder

2. Pull clip apart and put the pipe in.

1. Mount pipe clip using appropriate fastener. In vertical mounting situations (horizontal pipework) ensure female ratchet is uppermost as shown below.

3. Press the pipe into clip towards the clipbase and set to appropriate setting.

To remove pipe from clip push the 2 bands sideways in opposite directions to disengage.

5. Bring up the ”0” ring and bushing andtighten nut until they are fully in place.

6. Unscrew nut, open grip ring and puton pipe with the large end touching thebushing.

7. Tighten nut with the appropriate wrench (NW2) taking care not to use excessive force. *Fitting may be supplied with a tapered seal instead of O-Ring, -in this case nut need not be removed, - simply chamfer pipe,lubricate, fully insert, and tighten

** Lubricate with silicone spray, soapy water or vaseline except on specialist applications. ie: powder coating, spray painting,breathing & quality air, etc. DO NOT use penetrating fluids such as WD40, 5-56, Penetrene etc.

2. Chamfer with appropriate chamfering tool. (CHAM...) This may not be necessary for AIR20, 25, 32.

3. Remove nut and conical grip ring from fitting and mount on pipe in the same order with the large end of the grip ring facing fitting. Lubricate, see notes*, **.

4. Insert the pipe into fitting with a twisting motion until it passes through the ”0” ring and meets the internal shoulder. Ensure that grip ring is touching the fitting.

5. Screw and tighten the nut onto the fitting firmly by hand. The larger pipe sizes 40mm & upward will need tightening with the appropriate wrench (NW1) however, do not use excessive torque.

Pipe Support SpacingsHorizontal Support Spacing

Pipe Size Up to 25˚C Up to 50˚CAIR20 700 600

AIR25 900 750

AIR32 1200 900

AIR40 1400 1100

AIR50 1600 1200

AIR63 1800 1400

AIR90 2000 1600

AIR110 2400 1800

AIR160 2700 2100

Spacings may need to be altered for various ambienttemperatures encountered. Refer to Technical Department.


1. Cut pipe to length using appropriate cutters. 2. Use scraper WPS 16063 to remove oxide layer from pipe for full fitting insertion length to approximate depth of 0.3mm.

1. Turn on Welder SFHM. Do not attempt welding unless tool is up to temperature (250°C). The light will flash on/off with thermostat control when temp. is correct.2. Cut pipe to length required with (PC...)cutters for a swarf free finish.

Socket fusion Welding Instructions AIR20 to AIR63

Electro Fusion Welding Recommended for AIR90 - AIR160

3. INSTALL PIPE WORK INTO CLIPS. 4. INSTALL BRANCHES & OUTLETS. 5. TEST AND COMMISSION PIPE SYSTEM.

3. Wipe surfaces to be welded with Welding Wipes (EFPW) to remove dust etc, and allow cleaner to evaporate.

4. Assemble pipe and fitting making sure pipe is FULLY inserted. Clamps may be attached to stabilise joint during welding.

3. Simultaneously insert pipe and fitting onto socket and spigot to full depth without twisting. Hold for correct time as per table ‘Pre-heating seconds’ (left) .

5. Connect welder leads onto fitting terminals. Set correct weld time (marked on each fitting). Follow instructions for particular welder. Press start for weld cycle to commence. Allow to cool, time is marked on each fitting.

ELECTRO FUSION

Fittings for electro fusion comply with AS4129. Automatic control box reads resistor and sets and welds the correct time, fittings also labelled for manual setting times. Weld surfaces must be clean and dry.

Do not overscrape pipe. Use correct scrapers. Do not use emery paper or metal files.

IMPORTANT: Do not allow movement in the joint until cooling period has been completed. In some cases clamps may be required. Ensure continuous electricity supply during weld cycle.

SOCKET FUSION

Heating element socket fusion to welding guideline AS 2033-1980. Weld surfaces must be clean and dry. Welding machine must be up to temperature 230°C - 250°C before commencing. Avoid cold windy conditions. Do not realign joint after adjusting time, see table below. Do not overscrape pipe - interference fit must be retained. Do not twist pipe into fitting when fusing.

GENERAL WELDING GUIDELINES

Socket Fusion and Electro Fusion welding is a quick and simple operation for a joint of the highest integrity.

4. Remove pipe & fitting from heating element, immediately insert pipe into fitting without twisting.

6. Rising melt indicators confirm successful completion of weld. When Weld cycle is completed, allow assembly to cool without any movement or strain.

5. Check alignment within ‘adjusting seconds’ as per table (left). During cooling avoid mechanical strain or movement on welded joint.

RISING INDICATORS

Socket Fusion WeldingTime/Temperature Chart

Pipe OD mm

Pre-Heating Sec.

Adjusting Sec.

Cooling Min

20 5 4 2

25 7 4 2

32 8 6 4

40 12 6 4

50 18 6 4

63 24 8 6

90 40 8 6

110 50 10 8

100 101

DSFilt-David


EXAMPLE

1. The pressure drop in a compressed air pipe line can be estimated in the diagram by drawing a line from (A) the length line through (B) the air flow volume line to the reference line (C).

2. From the point on the reference line (C), draw a line through the pipe diameter line (D) to the reference line.

3. From the working pressure line (E) draw a line through the point on the reference line to the pressure drop line (G).

4. As indicated on (G), the pressure drop can be estimated to 0.07 bar.

10

20

50

100

300

500

1000

15002000

5000

5000

3000

2000

1000

500

500

0.03

0.05

0.1

0.2

0.3

0.5

1.0

1.5

10

5

15

300

200

100

50

30

25

20

200

100

50

20

APipe Length

(m)

BFree Air Flow

(f.a.d.)(l/s)

DPipe Inside Diameter

(mm)

EWorkingPressure

(bar gauge)

CReference

Line

FReference

Line

GPressure

Drop(bar)

Diag

ram

for C

ompr

esse

d Ai

r. Ap

prox

imat

e va

lues

onl

y

PRESSURE

1 psi = 0.069bar

1 kpa = 0.145psi

1 bar = 100kpa

1 bar = 14.5psi

1 kg/cm2 = 1 bar

FLOW

1 cfm = 0.4719 L/sec

1 L/sec = 2.119 cfm

1 m3/min = 35.3147 cfm

1 m3/min = 16.67 L/sec

Approximate compressor output calculation:

1kw x 1.35 = HP x 4 = CFM for Screw compressors.

For Piston compressors some manufacturers quote displacement which needs to be derated by 0.75 to calculate F.A.D. (Free Air Delivery).

Size of receivers shall be calculated as 10 times the flow in L/sec optimum or 6 times the flow in L/sec minimum.

COMPRESSED AIR PRESSURE / FLOW CONVERSION

UltraAir Installation GuidelinesBREATHING & MEDICAL APPLICATIONSUltraAir is suitable for breathing air and medical applications, provided Technical Department recommendations are adopted. It is the user’s responsibility to provide and maintain supply air at a suitable level of purity for these applications.

SUITABLE FOR OTHER APPLICATIONS.Products in this technical manual are also suitable for:

¡ Chilled Water

¡ Warm Water

¡ High pressure Fluid to 25 bar

¡ Inert Gasses

¡ Chemical Piping

¡ Vacuum Piping.

Please contact our Technical Department for details.

UltraAir PE100 Technical Specifications 1.1 The Compressed Air Reticulation Pipe shall be of non-metallic, blue in colour, corrosion free, High Density Polyethylene (HDPE) PE100 conforming to AS/NZS 4130/4131 and be made to PN 25 under an accredited AS 3902 Quality Control System and commercially known as UltraAir PE100.

1.2 The pipe shall be PN 25 rated at 16 Bar / 20 °C / 50 year design life and 11 Bar / 60 °C / 50 year with an applied safety factor of 2:1.

2.1 All fittings shall be Socket Fusion, Electro Fusion or Compression style fittings which comply with Australian Standards as listed below and commercially known as UltraAir.

2.2 Socket Fusion fittings shall be Black PE100 type made to DIN 16963 which shall be welded to AS 2033.

2.3 Electro Fusion fittings shall comply with AS/NZS 4129 and carry a Standards Mark Licence under Quality Assurance System in accordance with ISO 9002.

2.4 Compression fittings shall be either ‘O’ Ring or tapered seal to comply with AS/NZS 4129 and carry a standards Mark Licence No. 2018 in accordance with ISO 9002.

2.5 Reticulated compressed air piping shall be installed by suitably qualified and experienced personnel.

3.1 Fixing of pipe shall be of a type and spacing approved for use on HDPE PE100 as per UltraAir Technical Manual.

3.2 Pipe shall be light blue in accordance with AS/NZ 1345.

3.3 Pipe shall be co-extruded, on-black, ensuring UV stability.

Calculate Pipe Size - Flow Nomogram

HOW TO USE

102 103

Terms & Conditions of Sale1. INTERPRETATIONIn these Terms and Conditions and in any Contract to which these Terms and Conditions apply, unless inconsistent with the context:

a) Ultramax means Investech Group Pty Ltd as Trustee for Goldstar Pacifi c Trust (ABN 66 874 024 946 ) trading as Ultramax Systems or such other company related to Ultramax which accepts the Purchase Order;

b) Act means the Competition & Consumer Act 2010;

c) Cash Rate Target means the percentage specifi ed by the Reserve Bank of Australia as cash rate target.

d) Claim means any claim, demand, action or proceeding;

e) Collateral has the meaning given under the PPSA and in particular for the purposes of this Contract, the personal property that is not used predominantly for personal, domestic or household purposes as identifi ed in clause 8 hereof to which the Security Interest has attached;

f) Conditions means these Terms and Conditions; g) Contract means the contract between

Ultramax and the Purchaser for or in relation to the sale and purchase of Goods and/or Services;

h) Goods means any item of whatsoever nature which is sold or to be sold by Ultramax to the Purchaser;

i) Intellectual Property means all trade marks, patents, registered designs, copyright, logos, designs, drawings and software;

j) PPSA means the Personal Property Securities Act 2009 as amended;

k) PPS Register means the personal property securities register established under section 146 of the PPSA;

l) Prescribed Terms means any terms, conditions, guarantees and warranties which the Act and any other law expressly provides may not in respect of the Contract be excluded, restricted or modifi ed, or may be excluded, restricted or modifi ed only to a limited extent. The following statement only applies to a Consumer Sale of Goods or Services as defi ned in the Act: “Ultramax’s Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to have the Goods repaired or replaced if the Goods fail to be of acceptable quality”;

m) Price means the price of the Goods and/or Services as agreed by the Purchaser and Ultramax at the time the Contract is formed pursuant to clause 2 below;

n) Purchaser means the Purchaser on the Purchase Order;

o) Purchase Order means an off er by the Purchaser for the purchase of Goods and/or Services;

p) Security Interest has the meaning given under the PPSA;

q) Services means all or any part of the services to be provided by Ultramax pursuant to the Contract;

r) Standard Specifi cations means Ultramax’s standard specifi cation for the Goods current at the time the Goods are delivered to the Purchaser. Copies of the Standard Specifi cations are available upon request from Ultramax;

s) Words importing the singular number shall be deemed to include the plural and vice versa. Words importing the male gender shall be deemed to include the female and neuter gender and vice versa; and

t) The headings in these Conditions are provided for convenience only and do not eff ect the interpretation thereof.

2. GENERAL a) The Contract is formed by Ultramax’s

acceptance of the Purchase Order. Written acceptance of the Purchase Order by Ultramax or commencement of performance of any work or services pursuant to the Purchase Order by Ultramax shall constitute acceptance of the Purchase Order.

b) All Purchase Orders supplied by the Purchaser are subject to acceptance by Ultramax and no Contract between Ultramax and the Purchaser comes into existence until Ultramax accepts the Purchase Order.

c) These Conditions apply to all Contracts entered into between Ultramax and the Purchaser.

d) Subject to any Prescribed Terms, these Conditions embody the sole Terms and Conditions of the Contract between Ultramax and the Purchaser and supersede all other conditions and agreements between the parties, unless expressly amended in writing by Ultramax.

e) These Conditions shall without further notice apply to all future transactions between Ultramax and the Purchaser in relation to the sale and purchase of Goods and/or Services, whether or not this document is delivered or executed in the course of the transaction.

f) For the avoidance of doubt, none of the terms and conditions contained in any document or other instrument supplied by or on behalf of the Purchaser (including without limiting the foregoing those included in a Purchase Order or like document from the Purchaser) shall apply to or form part of the Contract and any such terms and conditions by the Purchaser are expressly rejected by Ultramax, except and to the extent otherwise agreed in writing by Ultramax.

g) No variation or abrogation of these Conditions shall be eff ective unless it is evidenced in writing signed on behalf of Ultramax.

h) These Conditions supersede all terms and conditions of sale previously issued by Ultramax.

i) Any products to be manufactured to special order are required to have a 50% payment in advance with the balance to be paid before despatch to the customer.

3. PRICE a) The Price will be fi xed from the date the

Contract is formed. 4. GOODS AND SERVICES TAX In this clause:

a) GST refers to Goods and Services Tax under a New Tax System (Goods and Services) Act 1999 (GST Act) and the terms used have the meaning as defi ned in the GST Act.

b) The Price and all other amounts agreed to be paid by the Purchaser to Ultramax, is exclusive of GST.

5. PAYMENT a) A minimum of $25.00 value is required for any

transaction.

b) Unless otherwise agreed in writing by Ultramax, payment by the Purchaser to Ultramax will be made on or before the last day of the month following the month in which the invoice was issued by Ultramax to the Purchaser.

c) Payment must be made in advance or on collection of goods if a credit account has not been established. Payment can also be eff ected by direct bank transfer, details available on request. Visa and MasterCard accepted.

d) Time for payment of the Price for the Goods and/or Services shall be of the essence of the Contract and if the Purchaser fails to pay the Price when due Ultramax may treat the Contract as repudiated by the Purchaser or may, unless payment in full is made, suspend delivery of the Goods the subject of the Contract and any Goods the subject of any other Contract with the Purchaser without incurring any liability whatsoever to the Purchaser in respect thereof. In addition, without prejudice to such other rights of Ultramax, the Purchaser shall (if so required by Ultramax) pay interest to Ultramax on the outstanding amount of the Price at the rate equal to the Cash Rate Target as at the date invoice was issued by Ultramax to the Purchaser increased by two (2) percentage points until the Price is paid in full.

e) Notwithstanding any rights of lien to which Ultramax may otherwise be entitled, Ultramax shall have a specifi c lien (including a right of sale) over the Goods the subject of the Contract and any Goods the subject of any other contract with the Purchaser until the Price of the Goods has been paid in full. The Purchaser shall not be entitled to make any deduction from the Price of the Goods in respect of any off set or counter claims.

f) If the Purchaser defaults in payment or breaches these Conditions then it will be liable for all costs incurred by Ultramax and will indemnify Ultramax against any loss, liability, charge, expense, outgoings or payment which Ultramax suff ers, incurs or is liable for in respect of the recovery of moneys owing by the Purchaser to Ultramax.

g) For freight payment, see 6. a)6. DELIVERY a) Freight is payable by the customer, freight can

be charged on the invoice when our transport method is nominated or accepted by the customer. Customers who nominate their own carrier are responsible for all freight costs incurred.

b) Any time or date named and accepted by Ultramax for completion, delivery, despatch, shipment or arrival of the Goods or for tender of any documents is an estimate only and does not constitute a condition of the Contract or part of the description of the Goods and is not of the essence of the Contract.

c) Unless otherwise stated in writing Ultramax may make partial deliveries or deliveries by instalments in any amount it may determine and each such partial delivery or delivery by instalments shall be deemed to be a separate Contract and these Conditions shall apply to each partial delivery or delivery by instalments.

d) The Purchaser shall notify Ultramax within 7 days of delivery of any shortfall in or loss or damage to Goods delivered. Failure to so notify shall, subject to the requirements of any Prescribed Terms, dis-entitle the Purchaser to any remedy in respect to the shortage, loss or damage.

7. RISK AND TITLE a) Except where Ultramax is storing the Goods

on behalf of the Purchaser, Ultramax will bear all risks for the Goods until either collection by the Purchaser from Ultramax’s premises, or despatched via freight carrier/logistics provider. The Purchaser will bear all risks for the Goods from Ultramax stores to their nominated point of delivery or where Ultramax stores the Goods on behalf of the Purchaser.

b) Property and title in the Goods supplied by Ultramax to the Purchaser will not pass to the Purchaser until such time as the Goods the subject of the Contract and all other Goods supplied by Ultramax to the Purchaser have been paid for in full. Until that time, the Purchaser shall store the Goods, including Goods into which the supplied Goods have been mixed, in such a manner as to show clearly that they are the property of Ultramax and shall upon Ultramax’s demand deliver up such Goods to Ultramax. In default of such delivery Ultramax may by its servants and agents enter the Purchaser’s premises at any time without notice to repossess the Goods.

c) Subject to the PPSA, until such time as the Goods have been paid for in full the Purchaser is at liberty to sell the Goods, in the ordinary course of its business, and the Purchaser shall hold the proceeds thereof in trust for Ultramax and promptly account to Ultramax for those proceeds in payment of the Price for the Goods.

d) The Purchaser and Ultramax agree that the provisions of this clause apply notwithstanding any agreement between the parties under which Ultramax grants the Purchaser credit.

8. PERSONAL PROPERTY SECURITIES ACT 2009 a) The terms “Collateral”, “Debtor”, “Financing

Statement”, “Financing Change Statement”, “Grantor”, “Proceeds”, “Secured Party”, “Security Agreement” and “Security Interest” have the meanings given in the PPSA.

b) The Purchaser acknowledges and agrees that by accepting these Conditions which form part of the Contract and constitute a Security Agreement that covers the Collateral for the purposes of the PPSA: i) Ultramax holds (as Secured Party) a

Security Interest over all of the Goods and all other present and after acquired Goods supplied by Ultramax to the Purchaser (Goods) and any Proceeds of the sale of those Goods (“Collateral”);

ii) that any purchase by the Purchaser on credit terms from Ultramax will constitute a purchase money security interest as defi ned under section 14 of the PPSA (“PMSI”);

iii) the PMSI granted herein will continue to apply to any Goods coming into existence or proceeds of sale of Goods coming into existence;

466

iv) Ultramax will continue to hold a Security Interest in the Goods in accordance with and subject to the PPSA, notwithstanding that the goods may be processed, commingled or become an accession with other goods;

v) any Ultramax Security Interest will be a continuing and subsisting interest in the Collateral with priority to the fullest extent permitted by law over all other registered or unregistered Security Interest;

vi) until title in the Goods pass to the Purchaser, it will keep all Goods supplied by Ultramax free and ensure all such Goods are kept free of any charge, lien or Security Interest and not otherwise deal with the Goods in a way that will or may prejudice any rights of Ultramax under the Contract or the PPSA; and

vii) in addition to any other rights under these Conditions or otherwise arising, Ultramax may exercise any and all remedies aff orded to it as a Secured Party under Chapter 4 of the PPSA including, without limitation, entry into any building or premises owned, occupied or used by the Purchaser, to search for and seize, dispose of or retain those Goods in respect to which the Purchaser has granted a Security Interest to Ultramax.

c) The parties acknowledge that Ultramax is entitled to register its interest in the goods supplied or to be supplied to the Purchaser under these Conditions on the PPSA Register as Collateral.

d) The Purchaser undertakes to: i) sign any further documents and provide

such information which Ultramax may reasonable require to register, amend or update a Financing Statement or Financing Change Statement in relation to a Security Interest on the PPS Register;

ii) indemnify and upon demand reimburse Ultramax for all expenses incurred in registering a Financing Statement or Financing Change Statement on the PPS Register or releasing any Security Interests;

iii) not register or permit to be registered a Financing Change Statement in the Collateral without the prior written consent of Ultramax; and

iv) provide Ultramax not less than 7 days prior written notice of any proposed change in the Purchaser’s name, address, contact numbers, business practice or such other change in the Purchaser’s details registered on the PPS Register to enable Ultramax to register a Financing Change Statement if required.

e) Ultramax and the Purchaser agree that sections 96, 125 and 132(3)(d) and 132(4) of the PPSA do not apply to the Security Agreement created under this Contract.

f) The Purchaser hereby waives its rights to receive notices under sections 95, 118, 121(4), 130, 132(3)(d) and 132(4) of the PPSA.

g) The Purchaser waives its rights as a Grantor and/or a Debtor under sections 142 and 143 of the PPSA.

h) Unless otherwise agreed in writing by Ultramax, the Purchaser waives its right to receive a verifi cation statement in accordance with section 157 of the PPSA.

i) The Purchaser shall unconditionally ratify any actions taken by Ultramax under this clause 8.

j) This clause 8 will survive the termination of the Contract to the extent permitted by law.

9. WARRANTIES AND EXCLUSIONS OF LIABILITY a) Ultramax warrants that the Goods when

delivered to the Purchaser will comply with the Standard Specifi cation for the Goods. Ultramax is not required to supply Goods with any specifi cation or characteristics that are outside any such description for the Goods (if any) or the Standard Specifi cations.

b) Ultramax shall be under no liability in respect of any defect arising from any drawing, design or specifi cation supplied by the Purchaser.

c) The Purchaser acknowledges, agrees, represents and warrants that: i) as the use of the Goods is outside the

control of Ultramax, the Purchaser is satisfi ed that the Goods when supplied will have the condition, characteristics, quality and attributes that will make them suitable or fi t for any ordinary or special purpose required for those Goods, even if that purpose is made known to Ultramax at any time;

ii) the Purchaser has or will in a timely manner conduct all mandatory or prudent tests and apply to all mandatory or prudent quality control checks and procedures to ensure the Goods and any product that is produced from them will be without defect and suitable or fi t for any purpose required for them; and

iii) the Purchaser has not relied upon any statement, representation, warranty, guarantee, condition, advice, recommendation, information, assistance or service provided or given by Ultramax or anyone on its behalf in respect of the Goods, other than those that are expressly contained in the Contract.

d) The Purchaser releases and indemnifi es Ultramax and its offi cers employees, consultants and agents from and against all actions, claims, proceedings and demands (including those brought by third parties) which may be brought against it, whether on their own or jointly with the Purchaser and whether at common law, under tort (including negligence), in equity, pursuant to statute or otherwise, in respect of any loss, death, injury, illness, cost or damage arising out of any breach by the Purchaser of any warranty provided by it under paragraph c) of this clause.

e) Except as expressly set out in the Contract and except for liability under any Prescribed Terms:i) all conditions, warranties, guarantees,

terms and obligations expressed or implied by law or otherwise relating to the Contract or the performance of Ultramax’s obligations under the Contract or to any Goods or Services supplied by Ultramax under the Contract are excluded, except for those conditions and warranties as to title in the Goods; and

ii) without limiting the generality of the foregoing, Ultramax gives no condition, warranty or guarantee whatsoever as to the suitability, performance or fi tness of the Goods for their ordinary or any special use or purpose, and the description of the Goods in any Contract or any other document shall not import any such condition, warranty or guarantee on the part of Ultramax.

f) Not withstanding anything to the contrary herein contained but subject to the provisions of any Prescribed Terms, Ultramax’s liability in respect of any Claim by the Purchaser arising in any way out of the Contract or its performance or from any failure to perform the Contract including (without limiting the generality of the foregoing) for breach of any condition, warranty or guarantee contained in the Contract or in any Prescribed Term and whether that liability arises under contract, tort (including negligence), breach of statutory duty or otherwise, is limited as follows:i) if any guarantee under the Act is

applicable to any Goods or Services supplied by Ultramax and Ultramax’s liability is due to a failure to comply with the guarantee and such failure cannot be remedied or is a major failure as defi ned in the Act (each such failure hereafter referred to as a Relevant Failure), Ultramax’s liability is as stated in the Act in respect of that Relevant Failure;

ii) if the liability is due to a failure to comply with any condition, warranty or guarantee (including any guarantee under the Act) in respect of any Goods or Services supplied by Ultramax under the Contract and such failure is not a Relevant Failure, Ultramax’s liability is limited as follows in respect of such failure: A) if the failure is in respect of Goods,

Ultramax’s liability is limited to replacement of the Goods or the supply of equivalent Goods, the repair of the Goods, payment of the cost of replacing the Goods or of acquiring equivalent Goods, or payment of the cost of having the Goods repaired, as determined by Ultramax in its sole discretion; and

B) if the failure is in respect of Services, Ultramax’s liability is limited to the supply of the Services again or payment of the cost of having the Services supplied again, as determined by Ultramax in its sole discretion.

g) Any condition, warranty, guarantee (including any guarantee under the Act), terms or obligations expressed or implied by law or otherwise relating to the Contract or the performance of Ultramax’s obligations under the Contract or to any Goods or Services supplied by Ultramax under the Contract will not apply to Ultramax and Ultramax will not be liable for any loss or damage to the Purchaser and the Purchaser will not be entitled to any Claim against Ultramax whatsoever where: i) the Goods, from any time after the delivery

to the Purchaser, are subjected to incorrect usage, failure to comply with Ultramax’s instructions (whether in writing or verbal), misuse, wilful damage, negligence, fair wear and tear or use of the Goods with incompatible products;

ii) the Goods are subjected to any alteration and/or repair and/or maintenance without Ultramax’s prior written consent; iii) work or maintenance are supplied in relation to the Goods other than by a person authorised in writing by Ultramax; iv) the Purchaser resets faults in the Goods without fi rst obtaining written consent from Ultramax; v) the Purchaser: A) fails to notify Ultramax of any defect

in the Goods (defective goods) within seven days after those defects are fi rst noticed by the Purchaser; and

B) fails to give Ultramax a reasonable opportunity (from the time that the Purchaser gives notice pursuant to clause 9g)v)(A) to inspect the defective Goods including any defective Goods that have been attached to or incorporated in any real or personal property.

h) To the extent permitted by law, Ultramax will have no liability to the Purchaser, however arising and under any cause of action or theory of liability, in respect of special, indirect or consequential damages, loss of profi t (whether direct or indirect) or loss of business opportunity arising out of or in connection with the Contract or its performance.

i) Any product or equipment is required to be returned to Ultramax Systems store for service or repair where the acceptance of a warranty claim is honoured. Goods returned for warranty will not be accepted without prior notice by the customer to Ultramax Systems.

10. RETURN OF GOODS a) Goods supplied to the Purchaser are not

returnable except as provided in clause 9 above.

b) If the Goods are in accordance with clause 9a) and all Prescribed Terms and are otherwise in compliance with the provisions of the Contract, Ultramax may from time to time under exceptional circumstances and in its absolute discretion, choose to accept the return of the Goods from the Purchaser. A cancellation fee will apply and the Purchaser will also reimburse Ultramax for all costs associated with the delivery and return of the Goods.

c) Goods returned for credit will not be accepted without prior notice by the customer to Ultramax Systems. A goods return number needs to be obtained prior to goods being returned. Products must be in a saleable condition and suitably packed. Freight must be paid by the customer unless the company was at fault in relation to the returned items. Returned items not accepted if not advised within 14 days of purchase date. The original invoice number must be provided to allow for prompt processing of credits.

d) Any goods returned will be subject to a minimum 25% of the sale value as a re-stocking fee. Special order items will not be accepted for return. The re-stocking fee will be at the sole discretion of Ultramax Systems.

11. INDEMNITY The Purchaser will indemnify and keep indemnifi ed Ultramax and its successors and assigns from and against any claim, liability, loss or damage Ultramax may sustain, as a result of any breach, act or omission, arising directly or indirectly from or in connection with this Contract by the Purchaser or its representatives.

12. FORCE MAJEURE

Terms & Conditions of Sale

46798 99

Terms & Conditions of SaleUltramax shall not be under any liability whatsoever for the consequences of any failure on its part to perform or delay in performing any obligation under the Contract when due, whilst and to the extent that such failure or delay is due directly or indirectly to any event of force majeure. Without limiting the generality of the foregoing, this includes any liability whatsoever for any delay in completion, delivery, despatch, shipment or arrival of the Goods or in the tender of any documents or the like.

“event of force majeure” includes any acts of God, war, riots, strikes, lock outs, trade disputes, fi res, break downs, mechanical failures, interruptions of transport, Government action or any other cause whatsoever, whether or not of a like nature to those specifi ed above, outside the reasonable control of Ultramax.

If there is an event of force majeure, Ultramax will notify the Purchaser of the event and the likely impact on its performance under the Contract. If the event aff ect the capacity of Ultramax to complete its material obligations under the Contract in a timely manner, Ultramax may by notice to the Purchaser terminate the Contract without any liability whatsoever on its part arising from such termination.

13. COST RECOVERY Any expenses, costs or disbursements incurred by Ultramax in recovering any outstanding monies owing by the Purchaser including debt collection fees and solicitors costs shall be paid by the Purchaser.

14. TERMINATION a) If:

i) the Purchaser fails to pay any moneys due and payable pursuant to the Contract; or

ii) the Purchaser breaches, repudiates or terminates the Contract; or

iii) winding up proceedings are commenced against the Purchaser; or

iv) a Liquidator, Administrator, Receiver, Manager or Controller (as defi ned by the Corporations Act 2001 is appointed to the Purchaser or any part of its assets; or

v) the Purchaser commits an act of bankruptcy (as defi ned by the Bankruptcy Act 1966); or

vi) Ultramax has reasonable belief that the Purchaser is insolvent or a party may attempt to levy any form of execution against the Goods; or

vii) the Purchaser suspends, or threatens to suspend, the conduct of its business; or

viii) the Purchaser becomes unable to pay its debts as and when they fall due, then Ultramax may terminate the Contract, in which case clause 15 herein of these Conditions will apply.

15. TERMINATION AND CANCELLATION In the event that the Purchaser purports to terminate and/or repudiates or cancel the Contract, or if Ultramax terminates the Contract pursuant to the Contract, then, without prejudice to its other rights and remedies, Ultramax may recover from the Purchaser all costs and expenses incurred by Ultramax in its performance of the Contract, and all loss and damages arising from or relating to the termination or repudiation including but not limited to the cost of any Goods ordered but not delivered (which cannot be cancelled).

16. INTELLECTUAL PROPERTY RIGHTSa) Property, right and title to all Intellectual

Property relating to the Goods remains with Ultramax. The Purchaser will be entitled to a non exclusive, non transferable licence of the Intellectual Property to the extent it is required for the proper use and performance of the Goods.

b) All Intellectual Property created during the course of the supply of the Goods or as a result of work done in connection with the supply of the Goods will be the property of Ultramax. The Purchaser will execute all documents evidencing ownership of the Intellectual Property as Ultramax may reasonably require.

17. WAIVER

A waiver of any right or remedy under the Contract is only eff ective if given in writing and shall not be deemed a waiver of any subsequent breach or default. No failure or delay by a party to exercise any right or remedy provided under the Contract or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy.

18. LICENSES, DUTIES, ETC. The payment of any taxes and the obtaining and maintenance in full force and eff ect of any necessary export or import licenses, authorisations or consent in respect of the Goods is the sole responsibility of the Purchaser and Ultramax shall be under no liability whatsoever in respect of Goods exported or imported without any necessary licenses, authorisations or consent.

19. INDUSTRIAL PROPERTY RIGHTS The Purchaser shall not alter, remove or in any way tamper with any of the trade or other marks or numbers of Ultramax attached to or placed upon the Goods.

20. NOTICES Any notice or other communication given to a party under or in connection with the Contract shall be in writing, addressed to that party at its principal place of business or such other address as that party may have specifi ed to the other party in writing in accordance with this clause, and shall be delivered personally, sent by pre paid fi rst class post, recorded delivery, commercial courier.

21. ASSIGNMENT The Purchaser may not assign or transfer or purport to assign or transfer any of its rights or obligations under or in connection with the Contract to any other person or corporation whatsoever.

22. SUB-CONTRACT Ultramax reserves the right to sub-contract the performance of any Contract or part thereof to any other party or person or corporation it may determine.

23. PROPER LAW AND JURISDICTION a) This Contract shall be governed by and

construed in accordance with the laws of Western Australia, Australia. The Purchaser agrees to submit to the non exclusive jurisdiction of the Western Australian Courts and courts of appeal there-from for all purposes of or in connection with this Contract.

468

PDS DisclaimerA person accessing or using this Catalogue (“Document”), whether in electronic or printed form, by the act of access or use agrees to terms of this disclaimer. If the person does not agree to the terms of the disclaimer, they must not access, read or use this Document.

Products

Product pictures are indicative only and may not look the same as those products supplied. In the interest of constant improvement in quality and design, Ultramax Systems reserve the right to change or amend the specifi cations or appearance of any product at any time.

No Representation or Warranty

ULTRAMAX SYSTEMS makes the information and other material “Information”in this Document available in good faith but without any representation or warranty by ULTRAMAX SYSTEMS, or by any of its offi cers or employees, as to the Information’s accuracy, completeness or suitability for any particular purpose. ULTRAMAX SYSTEMS and its offi cers or employees do not accept any responsibility or liability for the consequences (whether fi nancial, or otherwise) of access or use of the Information by any person. As the Information is of a general nature only, it is up to persons accessing or using the Information to ensure that it is suitable for the circumstances of its access or use. Any such access to, or use of, the Information is to be at the sole risk and responsibility of the person accessing or using it. ULTRAMAX SYSTEMS and its offi cers and employees are not responsible for any inaccuracy in, or omission from, the Information or for any unsuitability of the Information for any particular purpose. ULTRAMAX SYSTEMS does not warrant the accuracy, or completeness of the information, text, graphics, and other items contained in this Catalogue

Recommendations

Without limiting the general position stated above, this Document contains good faith recommendations and suggestions as to appropriate protocols or other principles (“Information”) which may be of use to persons accessing the Information. However, any such recommendation or suggestion is not to be read or construed as a guarantee by ULTRAMAX SYSTEMS: - Are or will be used by other persons; - Are or will be endorsed, promulgated or mandated by ULTRAMAX SYSTEMS in the future or otherwise; - Will continue to be recommended by ULTRAMAX SYSTEMS in the future; - Will achieve the results or outcomes that such information may express or imply or that a person accessing the information may want or expect; - Will be appropriate for a person accessing the Information in light of their present or future, intellectual property or information technology circumstances or in light of current and future, intellectual property or information technology developments Each person accessing the Information: - Must not rely on ULTRAMAX SYSTEMS in determining whether or not to follow recommended information; - Must make their own independent assessment of the appropriateness (or otherwise) of recommend Information in light of the person’s particular circumstances; - Should seek their own professional advice in respect of any decision to rely on (or not rely on) recommended Information. ULTRAMAX SYSTEMS is not liable for any: - Defect in, or omission from, any recommended Information; - Reliance by any person on any recommended Information; - Any other direct or indirect consequences of relying (or not relying) on recommended Information (whether such consequences are fi nancial, or otherwise).

ULTRAMAX SYSTEMS reserves the right to change its recommendations from time to time without having to provide reasons or give prior notice. When recommendations are changed, ULTRAMAX SYSTEMS has no obligation to indicate which recommendations were changed compared with recommendations previously made.

Supply

Whilst Ultramax will make every endeavour to despatch goods within 24 hours of receipt of an order, lead times may be aff ected by order quantities and product availability. Ultramax welcomes forward orders as a solution to on time supply. ULTRAMAX SYSTEMS does not warrant that all products shown in this Catalogue will be able to be, and/or will be supplied and/or imported, as original or substitute product, as represented. ULTRAMAX SYSTEMS is an OEM manufacturer and supplier. ULTRAMAX SYSTEMS is also an independent supplier of pipeline and fi ltration products which are carefully selected to satisfy OEM product standards. ULTRAMAX SYSTEMS is not connected to or associated with any OEM mentioned in this reference material. Use of OEM part numbers is purely for reference purposes only and in no way should be construed as ULTRAMAX SYSTEMS selling original equipment parts of any sort.

Product and Item Names and Codes/Part numbers

The use of OEM Codes/Part numbers is only for cross referencing purposes and does not imply that we are supplying/advertising /promoting/distributing/selling/representing the genuine item.

Ultramax sells air compressor parts/lubricant/items/fi lters that are interchangeable with OEM air compressor parts/lubricant/items/fi lters. Unless expressly specifi ed otherwise in the catalogue for a specifi c part/lubricant/item/fi lter, the part/lubricant/item/fi lter is not an OEM part/lubricant/item/fi lter. All OEM names are trademarks or registered trademarks of each respective owner. Names, models, and part numbers of OEM manufacturers are used in this catalogue are for cross-reference and compatibility purposes only.

Branding & Design

Ultramax Systems is a wholly Australian owned business and is not owned by or directly affi liated with any other Australian company. The name and branding must not be confused with any other business.

Document Control

This Document is uncontrolled in printed and electronic form. It is the responsibility of the user to verify that the copy in printed form is of the latest revision. ULTRAMAX SYSTEMS reserves the right to withdraw or modify this Document in any way without having to provide reasons or give prior notice. When modifi cations are made, ULTRAMAX SYSTEMS has no obligation to indicate where modifi cations were made compared with any prior version.

Trademarks

Company product, and service names mentioned in this Document may be trademarks or service marks. Those marks are the property of their respective owners. References to those companies, products or services are not to be read or construed as an endorsement or approval by the companies, or the respective owners, of the Information. Likewise, reference to those companies, products or services is not to be read or construed an endorsement of them by ULTRAMAX SYSTEMS. It is the responsibility of each person accessing the Information to ensure that they do not, in following any recommended Information, infringe the intellectual property or information technology rights of any other person.

• ABAC is a trademark of Multiair Italia s.r.l.• Adicomp is a trademark of Adicomp s.r.l.• Aias is a trademark of Aias s.r.l.• Air Filter Engineering is a trademark of Airfi lter Engineering (M)

SDN BHD.• Airmac is a trademark of Glenco Air & Power Pty Ltd.• Airman is a trademark of Hokuetsu Industries Co.,Ltd.• Anest Iwata is a trademark of Anest Iwata Australia Pty Ltd.• Argo is a trademark of Argo-Hytos B.V.• Atlas is a trademark of Atlas Copco AB.• Atlas Copco is a trademark of Atlas Copco AB.• Atmos is a trademark of Atmos-Tech Industries.• Baldwin is a trademark of Baldwin Filters, Inc.

• Bauer is a trademark of BAUER KOMPRESSOREN Australia Pty. Ltd.

• Becker is a trademark of Becker Pumps Australia.• Belair is a trademark of Drägerwerk AG & Co. KGaA.• Betico is a trademark of Miguel Carrera y CIA S.A.U.• Big Cat is a trademark of Atlas Copco Australia Pty Ltd.• Boge is a trademark of Boge Kompressoren Otto Boge GmbH

& Co. KG.• Bottarini is a trademark of Gardner Denver, Inc.• Busch is a trademark of Busch Manufacturing Co.• Case Poclain is a trademark of CNH Industrial America LLC.• Caterpillar is a trademark of Caterpillar Inc.• Ceccato is a trademark of International Compressor Distribution

NV.• Champion is a trademark of Gardner Denver, Inc.• Chicago P. is a trademark of Chicago Pneumatic.• Chinook is a trademark of Chinook Industrial Ltd.• Clark is a trademark of Clark Filter, Inc.• Compair is a trademark of Gardner Denver, Inc.• Creemers is a trademark of Creemers Compressors B.V.• CTA is a trademark of CTA.• Cummins is a trademark of Cummins Inc.• D.V.P. is a trademark of D.V.P. Vacuum Technology s.p.a.• Deltech is a trademark of SPX Corporation.• Domnick Hunter is a trademark of Parker Domnick Hunter.• Donaldson is a trademark of Donaldson Company, Inc.• Edwards is a trademark of Atlas Copco AB.• Esam is a trademark of Esam S.p.A.• F.P.Z. Eff epizeta is a trademark of FPZ S.p.A.• Fairey Arlon is a trademark of Fairey Arlon Ltd.• FC Curtis is a trademark of Curtis-Toledo, Inc.• Fiac is a trademark of Fiac S.p.A.• Fiat is a trademark of Fiat S.p.A.• Fini is a trademark of Fini S.p.A.• Finite is a trademark of Parker Hannifi n Corp.• Fleetguard is a trademark of Cummins Inc.• Friulair is a trademark of Friulair s.r.l.• FST is a trademark of FST GmbH Filtrations-Separations-Technik• Fu Sheng is a trademark of Fu Sheng Group.• Gardner Denver is a trademark of Gardner Denver, Inc.• Gardner Denver Wittig is a trademark of Gardner Denver, Inc.• GEV is a trademark of General Europe Vacuum S.r.l.• Hankison is a trademark of Hankison Corp.• Heidelberger is a trademark of Heidelberger Druckmaschinen

AG.• Hiross is a trademark of Hiross.• Hitachi is a trademark of Hitachi Construction Machinery Co.,

Ltd.• Hokuetsu is a trademark of Hokuetsu Industries Co.,Ltd. • HydroVane is a trademark of Gardner Denver, Inc.• IHI is a trademark of IHI Corporation.• Ingersoll Rand is a trademark of Ingersoll-Rand plc.• J.C.B. is a trademark of JCB Construction Equipment Australia.• Jun-air is a trademark of IDEX Corporation.• Kaeser is a trademark of Kaeser Kompressoren SE.• Knorr Bremse is a trademark of Knorr-Bremse AG.• Kobelco is a trademark of Kobe Steel, Ltd.• Kremlin is a trademark of Kremlin.• Leybold is a trademark of OC Oerlikon Management AG,

Pfäffi kon.• Leyland is a trademark of Leyland Filtration Limited.• Liebherr is a trademark of Liebherr-International Deutschland

GmbH.• Lilly is a trademark of Lilly Engineeering Company, Inc.• Mahle is a trademark of Mahle International GmbH.• Manitou is a trademark of Manitou BF.

469100 101

• Mann & Hummel is a trademark of Mann & Hummel GmbH.• Mark Compressors is a trademark of International Compressor

Distribution NV.• Mattei is a trademark of Mattei Compressors, Inc.• Mikropor is a trademark of Mikropor Inc.• Mil’s is a trademark of Mil’s SAS.• Mitsuiseiki is a trademark of Mitsui Seiki Inc.• MP Filtri is a trademark of MP Filtri S.p.A.• MTA is a trademark of MTA S.p.A.• Multivac is a trademark of Multivac Sepp Haggenmüller GmbH.• Nash Elmo is a trademark of Gardner Denver, Inc.• New Holland is a trademark of Cnh Global NV.• O & K is a trademark of Orenstein & Koppel GMBH.• Omega is a trademark of Omega Air.• OMI is a trademark of Offi cine Meccaniche Industriali S.r.l.• Orion is a trademark of Orion Machinery Co.,Ltd.• Pfeiff er is a trademark of Pfeiff er Vacuum GmbH.• Pneumofore is a trademark of Pneumofore S.p.A.• Poclain is a trademark of Poclain Hydraulics Group.• Pompe Travaini is a trademark of Pompe Travaini S.p.A.• Purolator is a trademark of Mann & Hummel GmbH.• Puska is a trademark of International Compressor Distribution

NV.• PVR Rotant is a trademark of Agilent Technologies Italia S.p.A.• Renault is a trademark of Renault Trucks SAS.• Renner is a trademark of Renner GmbH.• Rietschle is a trademark of Gardner Denver, Inc.• Robuschi is a trademark of Gardner Denver, Inc.• Rotair is a trademark of Rotair S.p.A.• Rotorcomp is a trademark of Rotorcomp Verdichter GmbH.• Scania is a trademark of Scania AB.• Schneider is a trademark of TTS Tooltechnic Systems AG & Co.

KG.• SCS is a trademark of SCS Filtration Pty Ltd.• Shanghai SCR is a trademark of Shanghai Screw Compressor

Co., Ltd.• Shavo is a trademark of Shavo Technologies Pvt. Ltd.• Siemens is a trademark of Siemens AG.• SMC is a trademark of SMC Corporation.• Solberg is a trademark of Solberg Manufacturing, Inc.• Stauff is a trademark of Stauff Corporation Pty Ltd.• Sullair is a trademark of Sullair LLC.• Swan is a trademark of Tong Cheng Iron Works Co., Ltd• Tamrock is a trademark of Sandvik AB. • Termomeccanica is a trademark of Termomeccanica S.p.A.• TPC Pneumatics is a trademark of TPC Mechatronics Co., Ltd.• Ultrafi lter is a trademark of Donaldson Company, Inc.• Volvo is a trademark of AB Volvo.• Volvo Penta is a trademark of AB Volvo.• Vuototecnica is a trademark of Vuototecnica S.r.l.• Walker is a trademark of Walker Filtration Pty Ltd.• Wilkerson is a trademark of Wilkerson Corp.• Worthington is a trademark of Worthington Compressor USA,

LLC.• Zander is a trademark of Zander Systems Incorporated.

All Rights Reserved

No part of this publication may be copied, reproduced, scanned or stored in any electronic database, whether in whole or in part, in any form or by any means. Ultramax Systems will not hesitate to take appropriate legal action if it ’s rights in this respect are infringed.

Copyright © ULTRAMAX SYSTEMS 2015

This Document contains information which is protected by copyright. All Rights Reserved. All copies of this Document must include the copyright and other information contained on this page.

Catalogue

The information contained in this catalogue was accurate at the time of printing. Ultramax Systems accepts no responsibility for any errors herein. Specifications can be subject to change without notice.

All Rights Reserved.Copyright Ultramax Systems 2015.ABN 66 874 024 946.

Reproduction of this catalogue in part or complete form is not permitted without approval of Ultramax Systems

PDS Disclaimer

470102

ultramax.net

[email protected]

31 Morgan Street, Cannington, WA 6107

Western Australia: 08 9458 4477 Victoria: 03 9013 0560 Queensland: 07 3463 0620 New South Wales: 02 9086 9250 South Australia: 08 8312 4552 Northern Territory: 08 8998 9626

An Investech Group Company

Exporting to the World

Aust

ralia

n Ca

talo

gue

Innovators, Manufacturers & Distributors 100% Australian Owned

System Setup

Pipe Range

Fittings

Terminal Blocks

Valves & Flanges

Drop Leg Kits

Installation Tools

Technical Manual

Ultramax Sicoair Aluminium Pipe & FittingsEDITION 1.1 - Published August 2015

Compressed Air | Vacuum | GasesT: 08 9458 [email protected]

2015

Ultr

amax

Sic

oair

Alum

iniu

m P

ipe

Mas

ter C

atal

ogue

Documents

UltraAir Poly Pipe & Fittings - Elite Compressed Air...UltraAir Poly Pipe uses socket fusion and electrofusion fittings to create a cost effective, fully welded, leak proof solution