UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

Embed Size (px)

Citation preview

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    1/6

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    2/6

    UHT ProcessesSteam Inusion Steriliser

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    3/6

    The APV Steam Infusion Steriliser, Type SDH

    APV Technology

    APV has supplied UHT plants or

    sterilisation o milk and other liquid pro-

    ducts since the late 1950s, and today

    APV oers a complete range o direct

    and indirect UHT systems with either

    plate, tubular, scraped surace heatexchangers, inusion or injection.

    Today, the most advanced and exible

    direct UHT treatment is the APV inu-

    sion steriliser, type SDH

    The APV inusion system is ully auto-

    mated ensuring optimal control o the

    plant. It is supplied with capacities rom

    150 I/h to 44,000 I/h with the standard

    temperature profle: 5 -75 -145 -73 -

    25C.

    Advantages

    Gentle and accurate heating in the

    inusion chamber

    Accurate holding time

    Superior product quality

    High product exibility

    Low ouling rate

    Long operating time

    Operator riendly

    Preassembled and actory tested

    Product Range

    The APV direct steam inusion process

    oers exibility in terms o sterilisation

    o a wide range o products, such as:

    Milk

    Cream

    Vla

    Custard

    Pudding

    Sot ice mix

    Ice cream mix

    Condensed milk

    Baby ood

    Processed cheese

    Sauces

    Standard designThe APV inusion steriliser, type SDH,

    is a compact unit consisting o the ol-

    lowing main modules:

    Inusion/vacuum module

    Product balance tank

    Water balance tank

    Inusion chamber

    Vacuum chamber

    PC/PLC control panel

    Product Heat Exchanger

    Homogeniser

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    4/6

    APV Steam Infusion Chamber

    OptionsVariable capacity.

    Tubular heat exchangers or pre-

    heating and cooling.

    Instant Pasteurizer (patent pen ding)

    with a specially designed positive

    pump in the holding tube or veryhigh ouling products.

    Scraped surace heat exchanger or

    high viscosity "cold flled" products.

    Pasteurisation at lower temperatures

    (Extended Shel Lie).

    Combination UHT system oering

    both direct, indirect and High Heat

    Inusion UHT.

    Aseptic tank.

    Motor Control Centre (MCC).

    The APV inusion UHT concept can

    also be supplied as add-on solution

    to all common UHT plants rom other

    manuactures.

    The product enters the system through

    the balance tank and is pre-heated

    prior to inusion. The heart o the sys-

    tem is the inusion chamber.

    The patented nozzle system in the

    inusion chamber creates a cylindero product strings in the centre o

    the chamber. From the sides, steam

    is distributed at low velocity towards

    the product centre, and thereby the

    product is heated gently and ast to the

    sterilisation temperature.

    Air released rom the product during

    heating is removed through the top o

    the chamber. At the bottom, a cooling

    jacket ensures a constant thin flm o

    condensate isolating product rom the

    stainless steel surace.

    The synchronised ow o product,

    steam, air and condensate creates the

    optimum heat transer even or very di-

    fcult products.

    The product is then accurately ster-

    ilised in an innovative holding tube, and

    then cooled in the ash chamber and

    immediately pumped to the homoge-niser and fnally cooled by regeneration

    to the flling temperature.

    1. Plate preheaters 4. Flash vessel 7. Aseptic tank2. Steam inusion chamber 5. Aseptic homogeniser 8. Non aseptic cooler3. Holding tube 6. Plate coolers 9. Condenser

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    5/6

    Your local contact:

    APV, An SPX BrandPasteursvej 18600 Silkeborg, DenmarkPhone: +45 70 278 278 Fax: +45 70 278 330

    For more inormation about our worldwide locations, approvals, certifcations, and local representatives, please visit www.apv.com.SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation.Design eatures, materials o construction and dimensional data, as described in this bulletin, are provided or your inormation only and

  • 8/22/2019 UHTProcessesSteamInfusionSteriliser 6753 01-03-2009 GB

    6/6