Embed Size (px)
Ubicación del PARCON ESPOL
FASE I del PARCON ESPOL
Cromosomas
CTI – Planta Baja
CTI – Planta Alta
CTI
CTI - Ingreso
Zona posterior
PARCON ESPOL
Lobby del CTI
Interiores del CTI
CTI – Una realidad
Vista desde la Vía de acceso a la ESPOL
CTI + Lago PARCON ESPOL
CTI – Una realidad
CTI – Una realidad
CTI – Una realidad
HVAC Controls Security and Access Control Fire and Life Safety Systems CCTV & Digital Video
Asset Tracking Energy Applications
Wide Area Network/Internet (WAN)
Local Area Network (LAN)
Network Router/Firewall-14507780 Series74-3487 Speci�cation Data
Ethernet and T1 interfacesAES network encryption capable
••
Enterprise Systems IntegrationShare information with personnel, o�ce and �nancial system databases.
PRODUCT FEATURES:PeopleSoft and SAP Integration to EBI Cardholder Management System (CMS) database for database synchronization periodically or on demandGeneric Cardholder Object Model (CHOM) database integration interface optionOpen Database Connectivity (ODBC) support allows read-only access to EBI point, history, and event data for third-party system analysis and reporting
APPLICATIONS:Changes made to personnel information in the HR database are automatically sent to the EBI CMS to update area and equipment access informationEvents in the EBI CMS sends information to the HR system for time and attendance or after-hours billing reporting for energy and services
•
••
•
•
Global HRMS & PeopleTools support
Interface to SAP R/3 Human Resources Module ODBC
Primary Ethernet Network
W7064A UL Listed EBI ServerSpeci�cation Data 74-3021
Dual Xeon Processors at up to 3.5 GHz clock speed16 GB SDRAM (max)584 GB Internal HD Storage (max)Dual 10/100/1000 Gigabit on-board ethernetEmbedded SCSI & RAID controllersCD/CDR/DVD and DAT72 tape backup options
••••••
EBI Server and Redundancy OptionMicrosoft Operating System (see Spec & Tech Document for versions supported).Remote access server (RAS) supported (see EBI Compatibility Matrix for more information)
Server PC Speci�cations (Standard Performance):Dell Pentium 4, 3 GHz, 2 GB RAM, 40 GB HDTerminal services support for remote access via PDA or other handheld deviceAlarm pager capability for o�-site noti�cation including e-mail and SNMP supportDiagnostic tools with remote access capabilitiesQuality assurance: ISO 9001, SEI Level 3
••
•••••
Note: This document graphically represents the various systems Honeywell can integrate and is not to be used for system design.
Go to: www.honeywell.com/ebi for additional information regarding the powerful EBI software applications.Go to: www.buildingcontrolworkbench.com for additional information on the entire o�ering of Honeywell systems and products.
PRODUCT FEATURES:The complete solution for the safety and comfort of your people and the e�ective operation of your buildingsProvides an “enterprise view” that goes beyond traditional building automation, �re, and security systemsFully UL listed to provide authorized operators with 2-way command/control of any subsystem from any listed workstationAllows full interaction between applications to minimize risk to personnel and assets, maximize personnel productivity, and optimize system and equipment e�ciencyOperator segregation allowing access only to data and information appropriate for the speci�c userFully scalable from a single application and controller, to enterprise integration with multiple applications and servers distributed across the Ethernet LAN and WANMigration platform for a wide range of Honeywell legacy products including Excel Building Supervisor (XBS), Excel Building Supervisor Integrated (XBSi), DeltaNet Excel Plus, MicroCel, MacroCel, Excel Classic, FS90/FS90 Plus, Delta 1000 and Delta 2000
APPLICATIONS:Enterprise-wide, Integrated sequences of operation allow events in one subsystem to automatically and directly trigger events in another system. Example:
Tenant activates Fire Alarm pull stationEBI initiates digital video recording and captures the pre-recorded video leading up to the eventDoors are unlocked allowing safe egress while presenting live video to maintain facility securityHVAC initiates proper fan pressurization control for smoke control system operationInstruction pages and system information is presented to the various operators to manage risk and follow proper emergency procedures
Emergency and routine situations handled with maximum e�ciency by bringing the right information together at the correct decision point
•••••••
•–––––
•
Honeywell EBI is listed for use in the following categories:UL 864 9th Edition listed
UOJZ Proprietary Protective Signaling SystemUOXX Control Unit AccessoriesUUKL Smoke Control SystemsUDTZ Signal System Units
UL 916 – PAZX Energy Management EquipmentUL 1610 – AMCX Central Station Receiving UnitUL 294 – ALVY Access Control System UnitsUL 1076 – APOU Proprietary Alarm Receiving UnitsUL 2017 – QVAX Process Management EquipmentUL 60951 – NWGQ Information Technology Equipment
Applicable for use in UL2050, DoD, DCID, and SCIF high-security applicationsListed by ULC for similar applications in CanadaApproved by the California State Fire Marshal, Factory Mutual, and additional international agenciesSee individual product speci�cation data sheets for speci�c approvals
•––––
••••••
••••
EBI HMIWeb Client StationsStatic and rotary station licensingHMIWeb Client browser support40 simultaneous clients supported
Operator area segregation and permissions enforcedMulti-Monitor support on single client licenseOperator de�nable alarm and event summariesWindows 2000, Windows Server 2003, or Windows XP Pro
•••
–•••
NetworkFirewall
Distributed System Architecture (DSA)Provides centralized monitoring for geographically distributed systems, and scalability for large enterprise systems.
PRODUCT FEATURES:Integrate multiple servers each performing a di�erent application: HVAC, Security, Life Safety, Industrial ControlDSA for points and DSA for cardholders allows Operator Client Stations consistent access to both local and remote points and cardholder dataExtends the capacity of a single server solution to support additional points, channels, and controllersUtilizes Windows 2000 Server, or Windows Server 2003
APPLICATIONS:The HVAC system and security system operate independently, and share data to optimize occupancy scheduling, lighting, and energy management strategies based on information from both systemsCardholder data may be managed from a single client on a single server in a “Traveling Card” concept allowing cardholders to move between sites
••••
•
•
EBI DSA Server EBI DSA Server
Corporate Intranet, VPN, or WAN
Intranet and Internet AccessConnectivity options allow access from anywhere in the world via HMIWeb Client and Browser Stations, or Web page access via Web Toolkit and Web Point Control optional interfaces.
PRODUCT FEATURES:HMIWeb browser station utilizing Microsoft Internet Explorer (IE) provides full client access with opera-tor permissions and area segregation enforcedEBI systems with TCP/IP network access and the network server option may also utilize Web Toolkit pages with Active X controls for analog and status point monitoring and controlWeb Point Control utilizes Java Applets to allow status point control and allow users to de�ne schedules up to one week in advance
APPLICATIONS:Users away from the o�ce may access their EBI system using VPN, or through a thin client access over the internet to check system status, issue commands, respond to alarms, or request reportsServiceNet, Honeywell Remote Monitoring provided by the Honeywell Global Service Response Center (GCRC) via intranet, VPN, or internet connectivity.(ref SL 56-7745)Honeywell Software Update Service (SUS) for EBI is both a management console and a service. SUS provides installation and management of the latest quali�ed Microsoft and EBI software updates as well as system policies to insure optimal system performance and improved security. SUS is available on a subscription basis. (ref SL 53-1091 & SL 53-1089)
•
•
•
•
•
•
HMIWeb Client Browser Station
Internet Explorer Web Toolkit
EBI Web Point Control
NetworkFirewall
NetworkFirewall
PRODUCT FEATURES:Harnessing the power of Honeywell’s patented Distributed System Architecture (DSA), EBI lets you achieve this convenient and seamless single operator interface without complex engineering, database management or sharingReduces training, maintenance and administration costs by employing the same tools for creating graphic displays (for building systems and process control), con�guring points and all system con�gurationsSupports implementation of occupational health and safety policesMore e�ectively leverages your systems investment
APPLICATIONS:Integrates and controls a plant’s HVAC, lighting, hydraulics and energy usageProvides primary monitoring and control of plant’s life safety systems with integrated response prompting and tracking capabilities, for exceptional incident management and regulatory complianceIntegrated access control provides site mustering capabilities to automatically track employees during emergency evacuation situationsVideo surveillance and digital video management support permits control room observation of critical processes for informed operational and safety decisions
•
•
••
••
••
Experion Process Knowledge System (PKS)™
Experion Process Knowledge System™ (PKS)™ Integration – Unlocks bene�ts via a uni�ed, collaborative and open architecture that integrates seamlessly to deliver a single operator environment for plant control, life safety, HVAC, digital video and security.
TCP/IP LAN, WAN, Internet & Intranet
Open System Integration – EBI supports multiple industry standard communication protocols to allow enterprise-wide monitoring and control from a single client workstation.
PRODUCT FEATURES:Client and server support for BACnet, LonWorks, OPC, Modbus, and Advanced DDEOpen Interface discovery tools to simplify engineering and con�guration of BACnet, LonWorks, and OPC Integrations
APPLICATIONS:Monitoring and control of third-party HVAC central plant and unitary equipment, industrial controls, and other systems utilizing Open System Communication ProtocolsMonitoring third-party Life Safety systems Integrated system sequences of operationHistory collection, trending, and global scheduling of third-party open systems
••
•
•••
BACnet, ASHRAE STD, SSPC 135 Client/Server Interface, Cimetrics BACstac BACnet Ethernet & IP SupportRPM, WPM, COV, Alarm, Schedule, and BBMD support (See EBI PICs for more information)
••• LonWorks® Network
ANSI/EIA Std. 709.1LonWorks Network Services (LNS)Connectivity via: PCLTA, i.LON® 600EXCEL 5000 Open LON and Excel CARE (see 63-9026 for more information)
••••
Advanced Dynamic Data Exchange (AdvDDE) and DDE
Point monitoring and control• Modbus: Gould, Modbus Plus, Universal Modbus
Gould Modbus to Modicon 584 and 984 PLCsRS232 serial interface and Modbus TCP support
••
OLE for Process Control (OPC)Read/write of analog and status pointsItem names up to 64 characters
••
Multiple LNS databases supported by single LonWorks Point Server
•
i.LON® 600 RouterProvides network connectivity between Ethernet LAN and LONTalk (FTT-10A) busUUKL version available where smoke control required
•
•
LON
LON
PRODUCT FEATURESCP-2xx family of NiagaraAX controllers give onboard IO and access to a single MSTP bus and / or a single LON bus which can be used to add additional distributed IO controllers. The controller is designed for DIN rail mounting and has removable screw connector terminals.
•
ComfortPoint Niagara Plant Controller Solution
Honeywell ComfortPoint™Native BACnet Solution
PRODUCT FEATURESComfortPointTM
Speci�cation Data SL-53-1092Supports BACnet Client and Server Operator Work Stations (OWS)Network connectivity con�gurations supported include BACnet IP Router, BACnet Controller, Gateway, and Web ServerUtilizes BTL listed, BACnet “Native”, Advanced Application Controllers (AAC)Each controller functions as a Master on BACnet, MS/TP LAN for Peer-to-Peer communicationControllers support the following functionality: Universal Inputs and Outputs (varies by model), 10 Program Objects (fully programmable), PID loop objects (Qty varies by model), 40 Analog and 40 Binary value objects, 8 Schedule objects, 3 Calendar objects, Intrinsic Alarm reporting, 8 Noti�cation Class objects, 8 Trend objects (256 samples each), Standard Applications and Fully Programmable Control using the ComfortPoint Programming Tool
••
•
•
•
BACnet Router/Controller/Gateway & Web Server CP-545-AX and CP-403-AX85-3038 Speci�cation Data (CP-403-AX)*85-3037 Speci�cation Data (CP-545-AX)**See speci�cations at bottom of chart
PRODUCT FEATURESUses Honeywell XL10 family of controllers.Controllers use LonWorks based Open Communications Protocol - the Worldwide standard in building control - so you can expect smooth, e�cient interoperability between devices.Stand Alone operation at the �eld control bus level for maximum perfor-mance and reliability.Free topology transceiver technology simpli�es wiring, uses standard network tools.ComfortPoint Programming Tool (CPT) contains con�guration wizards to simplify setup and operation of XL10 controllers. Speci�cation Data Sheet SL-85-3040
••
•
•
•
ComfortPoint LonWorks Solution
CP-201 Niagara Based Controller1 x MSTP port and optional 1 x LonWorks port85-3020 Speci�cation Data
BACn
et M
S/TP
Bus
CP-7001 & CP-7051: Advanced Application Controller for VAV Terminal UnitsSpeci�cation Data 85-3013
UL 916; BTL listed; I/O: 3 universal inputs, 3 universal outputsMeets Standard VAV Terminal Unit Control SequencesCP-7001: 18 deg/Minute actuatorCP-7051: 60 deg/Minute actuator
CP-7003 and CP-7053 Advanced Application Controller for VAV Fan Induction UnitsSpeci�cation Data 85-3014
UL 916; BTL listedI/O: 3 Universal Inputs, 1 Universal Output, 1 Optically Isolated Triac Output, 1 NO Relay ContactCompatible with CP-1161 and CP-1181 Net Sensors, and CP-6000 Series SensorsCP-7003 18 degrees per minuteCP-7053 60 degrees per minute
CP-7301 and CP-7301C Advanced Application Controller for Air Handler UnitsSpeci�cation Data 85-3015
UL 916; BTL listedI/O: 4 Universal Inputs, 3 Universal OutputsCompatible with CP-1161 and CP-1181 Net SensorsCP-7301C equipped with real-time clockCP-7301 without real-time clock
CP-7302 and CP-7302C Advanced Application Controller for Roof Top UnitsSpeci�cation Data 85-3016
UL 916; BTL listedI/O: 4 Universal Inputs, 1 Universal Output, 1 Optically Isolated Triac Output, 2 Dual-Stage Traic OutputsCompatible with CP-1161 and CP-1181 Net Sensors
CP-7401 and CP-7401C Advanced Application Controller for Heat Pump UnitsSpeci�cation Data 85-3017
UL 916; BT L listedI/O: 4 Universal Inputs, 4 Optically Isolated Triac OutputsCompatible with CP-1161 and CP-1181 Net SensorsCP-7401C equipped with real-time clockCP-7401 without real-time clock
CP-5801 and CP-5802 Advanced Application Controller for Direct Digital ControlSpeci�cation Data 85-3011
UL 916; BTL listedI/O: 8 Universal Inputs, 8 Universal OutputsSupports up to 8 output override cards:
HPO-6701 Triac OutputHPO-6702 Short protected analog outputHPO-6703 Relay, NO contactsHPO-6704 4-20 mA current loopHPO-6705 Relay, NC contacts
Compatible with CP-1161 and CP-1181 Net SensorsCP-5801 equipped with real-time clockCP-5802 without real-time clock
CP-5831 Advanced Application Controller for Direct Digital ControlSpeci�cation Data 85-3012
UL 916; BTL listedI/O: 16 Universal Inputs, 12 Universal Outputs
•••
••
••
•
••
•••
••
••
•
••
•
••
•••
–––––
•
••
••
Distributed Input/Output Accessories1 XFR522
Module Type: ................ Manual override for XFL522Manual OverrideSwitches: ..................... 8
2 XFR524 Module Type: ................ Manual override for XFL524Manual OverrideSwitches: ..................... 6
3 XSL511 Module Type: ................ Connector module for
XFL521, XFL522, XFL523, XFL524
4 XSL512 Module Type: ................ Manual disconnect module
between terminals and I/O modules
5 XSL513 Module Type: ................ Terminal block for
XFL521/522/5236 XSL513
Module Type: ................ Terminal block for XFL524
Smart I/O Module74-3671 Speci�cation DataXFC3A06001
Terminals: .................... Fixed permanentDigital Inputs: ............... 4Digital Outputs: ............. 4Analog Inputs: .............. 4 (20K NTC)Analog Outputs: ............ 2 (VDC)
XFC3D06001Terminals: .................... RemovableManual Override: .......... 6No. of LEDs: ................. 10Digital Inputs: ............... 4Digital Outputs: ............. 4Analog Inputs: .............. 4 (20K NTC)Analog Outputs: ............ 2 (VDC)
Coming soon Q3 2007
IO-16-H Optional Onboard I/O for CP-201 & CP-600
8 Universal Inputs4 Form A Relay Outputs4 0-10V DC Analog Outputs
IO-34-H Optional Onboard I/O for CP-201 & CP-600
16 Universal Inputs10 Form A Relay Outputs8 0-10V DC Analog Outputs1 onboard 24V AC/DC Power Supply
Maximum Con�guration per CP-201 is 1 x IO-34 and 2 x IO-16’s
•••
••••
CP-403-AX or CP-545-AX
CP-600 Niagara Based Controller1 or 2 MSTP port(s) and optional 1 x LonWorks portIBM PowerPC 440 250 MHz processor128MB DDR RAM & 128 MB Serial FlashOptional 256 MB DDR RAMBattery BackupReal-time clock
••••••
CP-201 or CP-600
CP-201 or CP-600
Constant Volume AHU Controller W775074-2956 Speci�cation Data
Proven PID space temperature control algorithmIntegral or packaged economizer controlSeparate intelligent recovery rates for heating and coolingDemand limit control temperature setpoint in energy saving directionLonMark pro�le 8030
W7750A Constant Volume AHU ControllerInputs
1 T7770 wall module1 resistive input2 dry contact digital inputs1 bypass button input
Outputs6 relay outputs1 LED output
W7750B/C Constant Volume AHU ControllerInputs
1 T7770 wall module4 resistive inputs2 voltage inputs4 dry contact digital inputs1 bypass button input
Outputs8 triac outputs (W7750B)1 LED output5 triac and 3 analog outputs (W7750C)
VAV Box Controller W775174-2942 Speci�cation Data74-2953 Speci�cation Data
Pressure-independent or pressure-dependent VAV box controlSingle-duct/dual-duct VAV box control solutionsReheat and peripheral radiation control (selectable "�rst on" sequencing)Series/parallel fanSupply/return air trackingLonMark functional pro�le 8010
W7751HInputs
1T7770 wall module1 resistive input1 voltage input1 bypass button input
Outputs4 triac outputs1 LED outputIntegrated actuator
W7751B, D, F1 Expanded input/output capacity actuator not included
Inputs1 T7770 wall module2 resistive inputs1 voltage input3 dry contact inputs1 bypass button input
Outputs8 triac outputs1 LED output
Unit Ventilator Controller W7753A74-2962 Speci�cation Data
Space or return air temperature controlASHRAE cycles 1, 2, 38 output for HVAC controlPWM or �oating damper controlLonMark functional pro�le 8080
Inputs1 T7770 wall module2 resistive inputs2 voltage/current inputs4 dry contact digital inputs1 bypass button input
Outputs8 triac outputs1 LED output
Fan Coil Unit Controller W775274-2959 Speci�cation Data
2 pipe, 4 pipe fan coil unit controlUp to 3 speed fan controlWith or without electrical reheatSpace freeze protectionLonMark functional pro�le 8020
Inputs1 T7770 wall module1 dry contact digital input1 bypass button input
Outputs3 relay outputs1 LED output1 electric heat relay (F type only)
Remote Input/Output Device W7761A74-2698 Speci�cation Data
Generic I/O for lighting, exhaust fans, pumps, and more LonMark standard objects for sensors and actuators
Inputs4 resistive inputs2 voltage inputs4 dry contact digital inputs
Outputs8 triac outputs
Communicating Thermostat T735063-1299 Speci�cation Data
For single zone rooftop units, split systems, heat pumps or hot/chilled water systems.Two occupied and two unoccupied periods per day.Individual heat and cool setpoints available for occupied and not occupied periods.P+I+D control minimizes temperature �uctuations.7-day programmingRemote sensor capability for temperature (including out-door air and discharge air) and humidity sensors.Auxiliary contact available for use with economizer or dehumidi�cation system.Conforms to LonMark Space Comfort Pro�le for rooftop applications.
Hydronic Controller W7762B/7763C74-2934 Speci�cation Data
Radiators, induction units, chilled ceilings and fan coil units with manual fan switching High e�ciency, low cost heat/cool valve application solution Model with integrated or remote module for wall or unit mountedLonMark functional pro�le 8020
Inputs1 space temperature sensor (either built in or via T7770 wall module)1 dry contact digital input
Outputs1 relay output4 triac outputs
•••
•
•
••••
••
•••••
•••
•
••
•••
••••
•••
•
•••••
••
•••••
•••••
••
•••••
•••
•••
•
•••
•
•
••
•••
•
•
•
•
•
•
•
•
••
CP-UL6438 – Programmable Unitary Controller
6 Universal Inputs4 Digital Inputs3 Analog Outputs8 Digital Outputs
••••
Coming soon Q3 2007
PRODUCT FEATURESFreely Programmable with Graphical Function Block EnvironmentRemovable Terminal StripsColor Coded Input/Output labelsInternal Real-Time ClockInternal DC Power Supply
•••••
CP-VL6438N – Programmable VAV Controller
6 Universal Inputs4 Digital Inputs3 Analog Outputs8 Digital Outputs
••••
CP-VL6436A – Programmable VAV Controller with Actuator
6 Universal Inputs4 Digital Inputs3 Analog Outputs6 Digital Outputs
••••
ComfortPoint system shown is representative of supported solutions. Additional products, software options, and interfaces may be necessary for a given solution. Contact Honeywell Building Solutions for more information. 1-800-345-6770, ext.612
LON, LonWorks, LonMark are registered trademarks of Echelon Corporation.
BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc (ASHRAE)
BTL is a registered trademark of BACnet International (BI)
NiagaraAX is a trademark of
Supports up to 12 output override cards:HPO-6701 Triac OutputHPO-6702 Short protected analog outputHPO-6703 Relay, NO contactsHPO-6704 4-20 mA current loopHPO-6705 Relay, NC contacts
Compatible with CP-1161 and CP-1181 Net Sensors
ComfortPoint Controller Room Sensor Options NetSensor with LCD displayCP-1161 & CP-1181Speci�cation Data 85-3019
Room temperature monitoring and controlNine function keys with seven user programmable keysPre-fabricated, quick-connect cables in 25, 50 and 75 foot lengthsCP-1181 includes humidity sensor
CP-6000 Series Sensors Speci�cation Data 85-3021
Room temperatureOptions include: temperature setpoint adjust, override, override indicator, LCD display, and BACnet MS/TP portPrefabricated sensor cables in 25, 50, and 75 foot lengths supported on some models
•–––––
•
••
•
•
••
•
Excel 500 Controller XC5010C †74-2036 Speci�cation DataI/O Point ModulesAnalog InputXF521A Insert Card
Module Type: ................ Analog inputNo. of Inputs: ................ 8Type of Inputs: .............. 0 to 10 volts .................................... 0 to 20 mA or 4 to 20 mA .................................... NTC
XF526 Insert CardModule Type: ................ Analog inputNo. of Inputs: ................ 8Type of Inputs: .............. 0 to 10 volts .................................... 0 to 20 mA or 4 to 20 mA .................................... NTC .................................... PT100, 1000, 3000, Balco
Analog OutputXF522 Insert Card
Module Type: ................ Analog outputNo. of Outputs: ............. 8Type of Outputs: ........... 0 to 10 volts +/- mA eachManual OverrideSwitches: ..................... 5No. of LEDs: ................. 8
XF527 Insert CardModule Type: ................ Analog outputNo. of Outputs: ............. 8Type of Outputs ............ 0 to 10 volts +/- mA eachManual OverrideSwitches: ..................... 0No. of LEDs: ................. 8
Digital InputXF523 Insert Card
Module Type: ................ Digital inputNo. of Inputs: ................ 12No. of LEDs: ................. 12Inputs 1 and 2: ............. Digital input or fast totalizerInputs 3-12: ................. Digital input or slow totalizer
Digital OutputXF524 Insert Card
Module Type: ................ Digital outputNo. of Outputs: ............. 6Type of Outputs: ........... 5 change over contacts .................................... 1normally open contactManual OverrideSwitches: ..................... 5No. of LEDs: ................. 6
XF529 Insert CardModule Type: ................ Digital outputNo. of Outputs: ............. 6Type of Outputs: ........... 5 change over contacts .................................... 1 normally open contactManual OverrideSwitches: ..................... 0No. of LEDs: ................. 6
Three Position OutputXF525 Insert Card
Module Type: ................ Three position outputNo. of Outputs: ............. 3Type of Outputs: ........... Floating controlManual OverrideSwitches: ..................... 3No. of LEDs: ................. 3 pairs of 2
Power ModuleXP502 Power Module
Module Type: ................ Power supplyInput: ............................ 24Vac + 10%/-15%Output: ......................... Class 2, 24VacSwitches: ..................... 1No. of LEDs: ................. 3
Excel 50 Controller XL50UMMIPC-LON74-3029 Speci�cation DataI/O Point Capacity
Analog Inputs: 8 ........... 0 to 10 Vdc .................................... 0 to 20 mA .................................... (w 499 Ω resistor) .................................... NTC 20k ohmAnalog Outputs: 4 ......... 0 to 10 VdcDigital Inputs: 4 ............ 3 of 4 fast totalizerDigital Outputs: 6 ......... Triac 800 mA
(all 6 Triacs max 2.4A)
Same Power of the Excel 500Similar operator interfaceSame softwareSame bus con�gurationFully programmable using Excel CARE
Model TypeExcel 50 UPC – without operator interface; Excel 50 UMMIPC-with operator interface
I/O Point Capacity22 physical pointsUp to 256 pseudo points46 network variables supported on the LonWorks® Network
Application module: ...... Flash–EPROMEngineering tool: .......... Excel CARE
Smart Excel 500 Controller XCL501074-3666 Speci�cation Data
Distributed Input/Output Modules 74-2145 Speci�cation Data Analog Input XFL521B Module
Distributed Module Type: Analog inputNo. of Inputs: ............... 8Type of Inputs .............. 0 to 10 volts .................................... 0 to 20 mA or 4 to 20 mA .................................... 20k NTC .................................... PT1000Accessories: ................. 3 4 5
Analog OutputXFL522B Module
Distributed Module Type: Analog outputNo. of Outputs: ............. 8Type of Outputs: ........... 0 to 10 voltsNo. of LEDs: ................. 8Accessories: ................. 1 3 4 5
Digital InputXFL523B Module
Distributed Module Type: Digital inputNo. of Inputs: ................ 12No. of LEDs: ................. 12Accessories: ................. 3 4 5
Digital OutputXFL524B Module
Distributed Module Type: Digital outputNo. of Outputs: ............. 6No. of LEDs: ................. 6Type of Outputs: ........... 6 Isolated changeover con-
tactsAccessories: ................. 2 3 4 6
••••
•
•••
C-Bu
s or
LO
NLO
N
† UUKL Listed in UL conforming con�guration.
C-Bu
s or
LO
N
Building Network Adapter (BNA) Q7055A74-3445 Speci�cation Data
TCP/IP capable, o�ers a wide range of network connectiv-ity options and online system diagnostic support
•
Distributed Input/Output AccessoriesSee ComfortPoint Plant Controller section for detailed speci�cations.
Smart I/O ModuleSee ComfortPoint Plant Controller section for detailed speci�cations.
HC90051-52-03-31 Speci�cation Data
Ethernet (Modbus TCP) connectivity to EBI Industrially hardened, hot swap I/O cards Fast updates-27 msec logic, 0.5 sec analog High resolution 15 bit universal analog inputs Embedded loop auto tuning
•••••
C-Bus or LON
LON C-Bus (optional)
Coming soon Q3 2007
Excel 800 Controller (XCL8010A)Panel-Bus supporting 16 Panel I/Os in any mixtureDouble size application memory (128KB RACL; max 192KB application)30% faster cycle time than Excel 500 Smart with the same application381 data-points (software/hardware) in random IO mixDIN rail mounting, �ts into fuse boxes (size 3 DIN43880)
Analog Input Modules with 8 Analog Inputs
Panel interface: ............ XF821ALON interface: ............. XFL821A
0 .................................. 10V = with pull-up resistor0(2) .............................. 10V = without pull-up resistor0(4) .............................. 20mA
Analog Output Modules with 8 Analog Outputs
Panel interface: ............ XF822A, XFR822ALON interface: .............. XFL821A, XFLR822A
0-11V=, +/-1mA Floating actuatorBinary output (0V / 10V
Binary Input Modules with 12 Binary Inputs
Panel interface: ............ XF823ALON interface: .............. XFL823A
Static binary input (dry contact)Totalizer for up to 20Hz
Relay Output Modules with 6 RelaysPanel interface: ............ XF824A, XFR824ALON interface: .............. XFL824A, XFLR824A
Relay output (change over contact)Total 12A, no capacitive load; P > 50 mW~:19..250V~, NO:4(4)A, NC 2(1)A, per relay=:1..29V=, NO:4(1)A, NC 4(1)A, per re
Floating Output Module for 3 Floating Actuators
Panel interface: ............ XFR825A
Two relays per �oating outputTotal 12A, no capacitive load; P > 50 mW~:19..250V~, NO:4(4)A, NC 2(1)A, per relay=:1..29V=, NO:4(1)A, NC 4(1)A, per relay
••
•
•
•
C-Bu
s or
LO
N
PRODUCT FEATURESA family of distributed control products that are open and easy to use, the EXCEL 5000 OPEN System is a proven performer that de�nes versatilityEvery control device in the EXCEL 5000 OPEN System family uses LonWorks® -based open communications protocol – the world-wide standard in building control – so you can expect smooth, e�cient interoperability between devicesThird-party LonMark device support allows additional devices from multiple manufacturers to be added to the existing LON busStand-alone operation at the �eld control bus level for maximum performance and reliabilityFree topology transceiver technology simpli�es wiring, uses standard network toolsTrue Integration with �re, security, and digital video systems creates application opportunities never before available
•
•
••••
*CP-403-AX1 each LON FTT10A port, I/O: 6 universal inputs and 4 digital relay outputs, 1 each RS-485 port (BACnet MS/TP); 1 each RS-232 port, Web User Interface (option); supports up to 27 each �eld devices. CP-403-EXP-AX supports up to 120 LON or 30 each BACnet “Native” devices (limited by controller resources available).
*CP-545-AX1 each LON FTT10A port, 4 each RS-485 ports (BACnet MS/TP); 2 each RS-232 ports, Web User Interface (option). Supports up to 120 LON devices and up to 30 each BACnet “Native” devices per RS-485 port (limited by controller resources available).
•
•
Honeywell Building Manager™EXCEL 5000® OPEN™ System Architecture: Designed for DDC control versatility and true open system �exibility.
Network Device Server – 14006700 Series74-3487 Speci�cation Data
Ethernet to RS232 or RS485 Converter, DB25 connecting via DB25 serial128 – 256 bit AES NIST certi�ed encryption
••
NexSentry Star II Controller (board only)P/N 92410250030 Base 2-door ControllerP/N 92410000300 Star Controller Modular EnclosureP/N 92410450020 4-door Chipset P/N 92410850020 8-door ChipsetP/N 92411650030 16-door Chipset
Base two-door system can be �eld upgraded to a 16-door unitOn-board integrated 16 inputs and 4 outputsCan monitor 255 inputs and control 96 outputsModular upgrade options for easy customization and expansionSwitch selectable baud rate and address for ease of installationElevator control up to 96 �oors100,000 cardholder capacityS-NET dual twisted-pair wire installation for readers and inputs2 on-board Wiegand ports expandable to 16Ethernet, RS-232, RS-485, and dial-up host communicationsBuilt-in automatic battery charging systemUp to 15 MIRO/WIRO units per controller
••••••••••••
OmniProx™ OP1092995100063-B Speci�cation DataP/N OP10HON
Lowest pro�le HID compatible card readerTypical read range: 2 - 3"Wiegand output Genuine HID™ compatible
OmniSmart OS1092995100082-A Speci�cation DataP/N OS10HON
Contactless smart card reader
••••
•
OmniProx™ OP3092995100063-B Speci�cation DataP/N OP30HON
Mullion sizeTypical read range: 4"Wiegand output Genuine HID™ compatible
OmniSmart OS3092995100082-A Speci�cation DataP/N OS30HON
Contactless smart card reader
••••
•
OmniProx™ OP4092995100063-B Speci�cation DataP/N OP40HON
Mounts on single-gang electrical boxTypical read range: 4"Wiegand output Genuine HID™ compatible
OmniSmart OS409299510082-A Speci�cation DataP/N OS40HON
Contactless smart card reader
••••
•
OmniProx™ OP4592995100063-B Speci�cation DataP/N OP45HON
Switch-plate size; mounts on a UK size electrical boxTypical read range: 3 – 4.5"Wiegand output Genuine HID™ compatible
•
•••
OmniProx™ OP9092995100063-B Speci�cation DataP/N OP90-FWS
Switch-plate size; mounts on a US size electrical boxVandal-resistant cast zinc-alloy designTypical read range: 2"Wiegand output Genuine HID™ compatible
•
••••
OmniProx™ OP95P/N OP95-FWS
Switch-plate size; mounts on a US size electrical boxVandal-resistant cast zinc-alloy design with piezo keypadTypical read range: 2"Wiegand output Genuine HID™ compatible
•
•
•••
SNET
RS-4
85 Wie
gand
TCP/IP Network AdapterP/N 92410000020
Controller mounted Ethernet LAN module128 – 256 bit AES-certi�ed encryption
••
SNET
RS-4
85
Lon
HandKey IIP/N HK-2
Hand geometry readerUp to 32512 users with memory upgradeDirect enrollment integra-tion to EBIOutdoor version available
••
•
•
OmniAssure™ Contactless Smart Card ReaderP/N OT30HON, OT31HON, OT35HON, OT36HON, OT70HON, OT75HON
Flash-on-card to update reader �rmware to evolving smart card standardsMullion and switch plate mountingADA compliant built-in audible buzzerTwo LEDs (red and green)Con�guration cards can be used to manage security keys and change the operating char-acteristics of the readerHidden mounting screws deter vandalismPotted for superior weather resistanceWiegand output
•
••••
•••
DR420192995100012-D Speci�cation DataP/N 92042011000
Low pro�le DigiReader HID compatibleSNET and Wiegand connections
•••
DR420592995100043 Speci�cation DataP/N 92042050100
DigiReader with tamper
DR420892995100012-D Speci�cation DataP/N 92042081000
HID compatibleSNET and Wiegand connections
•
••
DR4205K92995100012-D Speci�cation DataP/N 92042050000
DigiReader with integrated keypad – 24 V
DR4205SCK92995100013-D Speci�cation Data
Universal smart card reader with integrated keypadS-NET and Wiegand connections
•
•
•
DR420392995100012-D Speci�cation DataP/N 92042030000
Mullion-mount DigiReader•
DR422092995100012-D Speci�cation DataP/N 92042200000
Long-range proximity reader•
WIRO 4/8/4 (board only)92995100050-D Speci�cation Data92995100049-D Speci�cation DataP/N 92410034840
Additional 8 inputs / 4 outputs and4 Wiegand ports
WIRO 4/8/4 Modular Double Board EnclosureP/N 92410000400
•
MIRO 16/8 BoardP/N 92410020000
Additional 16 inputs / 8 outputs and 2 SNET ports
MIRO 32/0 Board in Modular EnclosureP/N 92410021200
Additional 32 inputs and 2 SNET ports
MIRO 2/24 Board in Modular EnclosureP/N 92410023200
Additional 2 inputs / 24 outputs and 2 SNET ports
•
•
•
TemaServer – Proximity TerminalP/N TS_TA32, TS_TA33
CPU68EN302 bi-processor including a 68000 (32 bit architec-ture) and onboard Ethernet controllerBi-directional reader with manual swiping for proximity cards Multi-language management of the user interfaceUp to 15,500 cardholder capacity with full time and Attendance functionalityUp to 65,000 transactions stored on a removable cartridge with Flash EPROMLead battery backup, with full functionality for 4 hours in case of network failureTamper protection of the unit to prevent opening
•
•••
•
•
•
TemaServer – Magnetic TerminalP/N TS_TA31
CPU68EN302 bi-processor including a 68000 (32 bit architec-ture) and onboard Ethernet controllerBi-directional reader with manual swiping for magnetic stripe cards Multi-language management of the user interfaceUp to 15,500 cardholder capacity with full time and attendance functionality Up to 65,000 transactions stored on a removable cartridge with Flash EPROM Lead battery backup, with full functionality for 4 hours in case of network failureTamper protection of the unit to prevent opening
•
•
••
•
•
•
TemaKey – Proximity, HID & Smart Card ReaderP/N TK_C02, TK_C03 HID Compatible, TK_C12 Smart card compatible (ISO14443A/B)
TemaKey – Magnetic ReaderP/N TK_C01
NEURON CHIP™ 3150 (Echelon) 32 KByte EPROM to download application �rmwareLonWorks™(Echelon) connection to the TS_AC01 unit with a transfer rate of 78 kbps Alphanumeric graphic liquid crystal display (LCD), back-lit, with two lines of 16 characters Bi-directional reader with manual swiping for magnetic cards (track 2, ISO/ABA 7811 standard).Numeric-function Keyboard with 16 keys1 double-colored LED signal: green LED for the correct reading and red/yellow for invalid Variable Tones for valid/invalid transactionsManagement of two dry contact digital inputs to control the door statusManagement of two relay outputs (1A@30V) to command door unlock and signal external outputsTamper protection of the unit to prevent opening
•
•
•
•
••
••
•
•
TemaKey – Digital I/O ModuleP/N TK_C21
NEURON CHIP™ 3120 (Echelon)4 balanced inputs with a range between 0 and 12 V4 open collector outputs with a range between 0 and 12 V up to 100mALonWorks™ (Echelon) connection with a transfer rate of 78 kbps Tamper protection of the unit to prevent opening
•••
•
•
TemaServer – Control UnitP/N TS_AC01
CPU68EN302 bi-processor including a 68000 (32 bit architecture) and onboard Ethernet controllerDialer support with LAN or as a backup to LANIndustry standard LON architectureFault tolerant controllers and power suppliesManagement of up to 8 doors with TemaKeys on both directionsManagement of up to 64 I/O1 MB FLASH EPROM to download application �rmware via FTPUp to 60,000 cardholder capacityUp to 40,000 transactions bu�erPeer-to-peer communication for fast front-end independent decision makingOnboard clock/calendar chip with automatic management of DSTOnboard battery backup, with full functionality for 4 hoursFull Time and Attendance functionality
•
••••
•••••
•
••
TemaKey – Dual Wiegand InterfaceP/N TK_S014
NEURON CHIP™ 3120 (Echelon)LonWorks™ (Echelon) connection with a transfer rate of 78 kbps 2 balanced inputs with a range between 0 and 12 V2 powered open collectors output, holding current 1.2A, peak max 5A inductive load Tamper protection of the unit to prevent opening
••
••
•
TemaPower – Power Supply UnitP/N TP_U01 (0.8A), TP_U03 (4.5A)
LonWorks™ (Echelon) connection to the TemaServer control units, with a communication speed of 78 kbpsProtection from power overloadsLED signal: green LED for “correct functioning,” �ashing red for “errors in the communication signal,” red for “device out of order” and yellow for “Echelon connection is active”Lead battery backup, with full functionality for 4 hours in case of network failureTamper protection of the unit to prevent opening
•
••
•
•
Control Center 2 (CC2) KeypadsP/N 8003-277Order # HL-8003277
Maximum 4 units per systemStatus display and local control2 line x 24 character LCD display
Area Keypad (KID) P/N 8003-220Order # HL-8003220
Maximum 8 units per systemArm/disarm speci�c areas6 LED annunciator display
6-Input Concentrator (BIC-6)P/N 8003-238Order # HL-8003238
Supervised and tamper protected6 supervised inputs/outputs7 segmented LED point alarm/trouble display window
2-Input Concentrator BIC-2P/N 8003-242; Order # HL-8003242 (White actuator buttons)
2-Input Concentrator BIC-2 HUP/N 8003-284; Order # HL-8003284 (Red actuator buttons for emergency/panic)
2 supervised inputs1 outputSupervised and tamper protectedRemote resetDistress actuator button
Hall E�ect Door Switch IV (HEDS IV)P/N 8003-283Order # HL-8003283
High-security door contact detectorSupervised and tamper proof
i9000 Remote Intelligent Power Supply (RIPS)P/N 8003-217Order # HL-8003217
Maximum 7 units per controllerPowered by 16V AC transformerTwo 400mA, 12V DC switched auxiliary outputs1A programmable outputStatus report to control unit over RS485 comm
•••
•••
•••
•••••
••
•••••
RS-2
32
COMM 1RS-485
COMM 2RS-485
I9000 Control UnitSpeci�cation Data 74-3035P/N 8003-332Order # HL-8003332
Monitors multiple areas (8 areas maximum)62 device modular architecture capacity512 input points with precise identi�cation64 output points to various equipment and accessories99 user IDs5 authority levels limiting access to selected functionsArea access – limits access to selected areasLanguage preference personalized to each user2 RS-485 communication linesPower supply included
••••••••••
Wie
gand
Ethe
rnet
Intelliguard 9000™ Security and Intrusion Detection
PRODUCT FEATURES:The Intelliguard 9000™ (I9000) is a protection system designed to detect intrusions and other critical conditions when used with the Enterprise Building Integrator™ (EBI)
The I9000 monitors multiple areas, receiving input and providing localized reporting and control. A single I9000 control unit can simultaneously monitor many di�erent buildings, areas with high-security door sensorsOther compatible detectors and output devices can be added to the system, such as motion sensors, sound detectors, lights, sirens, and buzzersMultiple regulatory agency listingsMeets high-security UL Grade AA requirementsMulti drop EBI con�gurations (3 I9000's) using RRI and RS-485 bus wiring or net-work device server
•
•
•••
Temaline A Comprehensive Solution for Security
PRODUCT FEATURES:Temaline is rede�ning the concept of integrated security solution subsystems for today and tomorrow.
Designed for unparalleled system reliability and availability using the “Shared Load” conceptNew distributed architecture and modularity reducing the management load on the supervisory systemMulti-application/multi-functional controller provides access control, time and attendance and intruder protectionOptional redundant TemaServer and “Shared Load TemaPower”Single standalone application to a fully integrated EBI solution
•
•
•
••
NexSentry Star II Controller Access Control System
PRODUCT FEATURES:NexSentry® Star II controller changes access control standards by o�ering easy installation, modular components at an a�ordable price for the most demanding access control applications.
Modular architecture allows for easy upgrades to future technologiesAdvanced digital technology with embedded Intel® 32 bit microprocessor provides the fastest response in the industrySupport for multiple access technologies including Digital Proximity, Magnetic Strip, Smart Card, Key Pad, and Biometrics
••
•
Ethe
rnet
Ethe
rnet
Photo ID StationLogitech® QuickCam Pro 5000Logitech P/N 961419-0403
Inside Out Networks® Watchport/V USB CameraInside Out Networks P/N 301-1141-01
PhotoID MiniTowerIntel Pentium 4 processor, 1000BaseT Integrated Ethernet adapter, online HD storage con�gurable to meet customer requirements
••
FlashPoint 3Dx Lite Video Capture CardIntegral Technologies® P/N 3280
Allows use of any analog cameraAvailable in PCI or AGP
••
FlashBus MV Lite Video Capture CardIntegral Technologies® P/N 3047
Allows use of any analog cameraOnly available in PCI
••
Fargo® DTC500 SeriesUp to133 cards per hour
Fargo® Pro-LXUp to120 cards per hour
•
•
Evolis Dualys SeriesUp to 140 cards per hour
Evolis Pebble SeriesUp to 140 cards per hour
•
•
USB
USB
Parallel
Parallel Ethe
rnet
Temaline – Mono Directional ReaderP/N TK_L12, TK_19 HID Compatible
Convenient mullion styleReads ISO 14443A/B cards (TK_L12)Reads HID proximity cards, 125KHz TK_L19)Reading distance: up to 4.0cm with HID ISOProx 11TM card (TK_L19)Host LED controlAnti-removal & tamper contact provide output signal to hostEmbedded supervised inputsEmbedded relay outputs (TK_L19)Embedded open collector outputs TK_L12)IP 55 protectionOperating temperature: -20°C/+60°C
•••••••••••
NEURON CHIP™ 3150 (Echelon) 32 KByte EPROM to down-load application �rmwareLonWorks™(Echelon) connection to the TS_AC01 unit with a transfer rate of 78 kbps Alphanumeric graphic liquid crystal display (LCD), back-lit, with two lines of 16 charactersReader for proximity cards, HID with TK_C03, (standard ISO/ABA 125Khz, up to 5cm reading distance)Numeric-function keyboard with 16 keys1 double-colored LED signal: green LED for the correct read-ing and red/yellow for invalid Variable tones for valid/invalid transactionsManagement of two dry contact digital inputs to control the door statusManagement of two relay outputs (1A@30V) to command door unlock and signal external outputsTamper protection of the unit to prevent opening
•
•
•
•
••
••
•
•
Intruder – Galaxy 3 Series Control Panels**
PRODUCT FEATURES:The Galaxy 3 Series of alarm panels is ideal for commercial and industrial appli-cations. The range comprises of three control panels, the Galaxy 3-48, the Galaxy 3-144 and the Galaxy 3-520, which allow expansion up to 48, 144 and 520 zones respectively. The new panels are fully compatible with Galaxy 8, 18, 60, 128, 500, 504 and 512 alarm systems, allowing an easy upgrade from existing Galaxy installations to the new 3 Series.Galaxy 3 Series panels also have the easy-to-use Galaxy programming interface. Features in the 3 Series panel range include:
16 on-board programmable zones with 8 on-board programmable outputsImproved communications performance via an on-board RS232 port and an optional integrated PSTN dialler/modem.Integrated, intelligent power supply that provides diagnostic information suitable for the requirements of PD6662/prEN50131-1:2004 Security Grade 3 installations
••
•
Galaxy 3-48 Control PanelIntegral 1.5A (0.5A @ Grade 3) Power Supply and Communicator16 zones expandable up to 48 zones8 outputs expandable up to 24 outputsSupport for 8 remote keypads (or 3 Keyproxs)500+500 event log100 Users4 Groups64 LinksGalaxy Peripherals SupportPC Applications for Remote Servicing
•
•••••••••
Mk7 KeypadStylish designTactile, backlit rubber buttonsSet/unset system with PIN numberProvides full system controll Tamper protectionConnected directly to the Galaxy panel (via direct cable connection) but can be mounted up to 1000m from the control panel32 alpha-numeric character, back-lit displayAuto summertime change
•••••
••
5802H Panic AlarmSleek design, fully supervised portable panic alarmDual button actionUse as a pendant or belt clipUser-replacable lithium batteryLED transmission indication
•••••
581 6H Universal ContactDoor and window protectionTwo loop transmitterBuilt-in magnetic reed switchAllows wired detector to signal to wireless receiver
••••
DT-725D/P DUAL TEC® Motion Sensor with K-Band Technology
Ability to adjust the microwave down to suit the char-acteristics of a 3m roomK-band technology, 35mA @ 12V dcOperating temperature: -10°C to +55°CEN50131-1 Security Grade 2, Environmental Class II
•
•••
DT7360UK Dual Technology Motion Sensor
Ceiling mount, 360 degree �eld of view Mirror technol-ogy PIR, Dual Tech K-Band sensorEN50131-1 Security Grade 2, Environmental Class IIDimensions: 130mm x 130mm x 60mm (H x W x D)Range: 360° – 15m diameter
•
•••
DT900/ Dual Technology DetectorRange: 27m x 21m – 15m x 12m (Selectable to 15m x 12m)Vandal resistant housing, bug guard,INFORMER™ Circuit identi�es range reductionMicroprocessor controlled, concurrent diagnostics, separate Alarm, Anti-Mask and Trouble relaysX-Band technology, 10,687Ghz FrequencyOperating temperature: -10°C to +49°C.Power requirements: 10~15V dc, 50mA @ 12V dcTamper switchDimensions: 134mm x 178mm x 210mm (H x W x D)EN50131-1 Security Grade 3, Environmental Class II
••••
••••••
FG701 Glassbreak Simulator / TesterCompatible with all IntelliSense and ADEMCO Glassbreak Detectors, all manufacturersRemote test mode activation operates from approximately 5 metres away When used with FG1600 Series Glassbreak DetectorsCalibrated signal output to allow true range veri�cationLow battery announcementDigitally produced glassbreak sound
•
•
•••
**North America approvals pending
P026-0-BGalaxy Power RIO
Boxed 2.75A PD6662:2004 (prEN50131-1:2004) Security Grade 3 intelligent Power Supply.Reports AC, Battery & Fuse status to the Galaxy control panels as well as tamper information over the Galaxy RS485 interfaceA Galaxy RIO is integrated in the unit providing 8 programmable inputs and 4 outputs
•
•
•
FG625TASFlexGuard® Glassbreak Detector
Selectable sensitivity, Mount anywhere, Surface mount design, all glass types.Power requirements: 6~18V dc,12mA @ 12V dcTamper switchCompatible with the FG701 Breakglass simulatorDimensions: 98mm x 6mm 2x21.8mm (H x W x D)Range: 7.6m – 360° (adjustable range up to 7.6m) EN50131-1 Security Grade 3, Environmental Class II
•
••••••
PRODUCT FEATURESThe VISTA-128BP/VISTA-250BP is an eight partition, 128/250 zone UL commercial burglary control panel that meets the demanding requirements of today’s commercial installations while simplifying end-user operation. A revolutionary new feature called Panel Linking allows multiple partitions, panels – even buildings – to be armed, dis-armed and have status checked all from one location. Up to eight VISTA-128BP/VISTA-250BP panels can be linked together.
Honeywell Security Manager™
VISTA-128BP/VISTA-250BPPartitioned Commercial Burglary Alarm Control Panel
Estimated availability Q4 2007
Provides nine style-B hardwired zones, up to 119/241 additional zones using a built-in polling (multiplex) loop interface with EOLR supervision supporting N.O. or N.C. sensors (optional for zones 2-8) Supports up to 128/250 wireless zones using 5881 type RF receiverProvides the ability to control eight separate partitions independentlyAccommodates 150/250 user codes with seven authority levelsAccommodates 32 keypad macro commands per systemScheduling capabilities including open/close schedules, holidays, timed events, access schedules and end user outpour programmingSupports up to 16 two-wire smoke detectors on zone 1Supports up to 50 latching-type glassbreak detectors on zone 8Supports up to 96 programmable relays
•
•••••
•••
Twis
ted
Pair
Fibe
r Opt
ic C
able
DeltaNet FS90Capability, Reliability, Expandability
PRODUCT FEATURES:The DeltaNet FS90 Fire and Security (F&S) family of real-time, microprocessor-based controllers o�ers conventional and intelligent �re detection and annunciation, security, and access control.
Building on the base FS90 system architecture, the family includes:DeltaNet FS90 System for conventional zone alarm veri�cation, cross-zoning, annuncia-tion, control, individual zone alarm, supervisory and trouble indication, zone disconnect switches, and a local audible signal. Security functions include local and remote secure/access switching and high-security line supervisionDeltaNet FS90 Plus System (“FS90 Plus”) for intelligent functions to monitor and con-trol individually addressable �re and security devices. FS90 Plus can have up to nine Intelligent Loop Interface Boards, each of which can have two 2-wire circuits or one fault-tolerant 4-wire circuitDeltaNet Access Control for monitoring and control of up to eight card readers and/or keypads per controller. The system supports multiple card technologies, multilevel anti-passback, two-card access, supervisor-required access, and elevator control
DeltaNet FS90 Fire and Security Controller74-3154 Speci�cation Data
Conventional and intelligent detection and signalingStand-alone operation and/or integration with higher order systemsFunction boards for con�guration to site requirementsEasily changeable data �le in nonvolatile memoryAuto-tuning sensitivityCommunication to panels via dual twisted pair, leased telephone lines, or �ber optic cables
DeltaNet FS90 Fire Command Center74-3154 Speci�cation DataAny DeltaNet F&S system, whether stand-alone or connected to a higher-order system, can include an optional command center for alarm and trouble message display and optional print-out, and for data display and entry from a keypad
XLS1000 F&S Bus Interface - 1450753274-2771 Speci�cation DataFully compatible with the DeltaNet F&S bus architecture, this interface allows XLS1000 controllers to co-exist with the FS90 on the F&S bus, providing a seemless migration path for customers
DeltaNet FS90 Access Management Controller (AMC)74-2438 Speci�cation Data
FS90 functions or operate as a dedicated access systemFully integrated with EBISupport for major access card technologies, including magstripe, barrium ferrite, proxim-ity, Wiegand, and biometric readersComplex access control applications such as elevators control, multi-level anti-passback, two-card, supervisor rules, PIN support, and over 200 schedules per controller
•
•
•
••••••
•••
•
FS90 Control and Communication Function BoardsPart Number Board Function
14505104-005 CA FS90 control/CPU board
14506344-001 LJ RS485 communications and display board
14506690-001 LJ Leased line communications and display board
14506302-002 SB/SD Two position manual switch – 4 circuits
14506302-001 SH/SK Three position manual switch – 4 circuits
Fire/Security Function Boards Part Number Board Function
14506106-001 AA Class “B” initiating device circuit – 4 zones
14505108-001 AB Class “A” initiating device circuit – 2 zones
14505106-002 AC Class “B” initiating device circuit – 4 zones – contact input only
14505118-001 AD Digital input – 8 circuits, unsupervised
14505132-002 AE Intelligent detection loop (slc) - 2 circuits per board
14505188-001 AF Class “B” secure/access circuit – 4 zones, with local control
14505188-002 AG Class “B” secure/access circuit – 4 zones, no local control
14506432-001 AH Class “B” ul grade aa high-security circuits
14505110-001 BF Class “B” noti�cation appliance circuit – 2 NAC circuits, 2 N.O. Relays
14505110-002 BG Class “A” noti�cation appliance circuit – 2 NAC circuits
14505116-001 DB Digital output – 8 circuits
14505112-001 DC Accessory relay board - 4 SPST N.O. OR N.C. relays
FS90 LAN Interface Assy- 14006700-59810074-3487 Speci�cation Data74-3646 Speci�cation Data
Con�gurable for single or dual Ethernet networksConverts Ethernet to RS232/RS485 with optical isolation for UL Fire/Security applicationsSupports 128-bit AES encryption
•••
PRODUCT FEATURES:As a stand-alone system, or as a network of distributed panels, Honeywell’s XLS140 and XLS3000 intelligent �re alarm control panel meet virtually every application requirement from small to large integrated systems. Designed with a high degree of modularity and for ease of system planning, these panels can be con�gured with just a few devices for small build-ing applications, or for integrated campus and commercial installations. Intelligent sensors deliver unique customer value such as: EclipseTM– a true peer-to-peer communication protocol and distributed intelligence that allows �eld devices to respond to an alarm condition in less than 1⁄2 second. SMART – a patented maintenance tracking and reporting solution that ensures your �re alarm system has been tested properly.
High-speed/patented smoke detection technology:FlashScan® Intelligent featuresPoll 318 devices on each loop in less than one secondActivate up to 159 outputs in less than three secondsFully digital, high-precision protocol (U.S. Patent 5,539,389)Advanced Warning Addressable Combustion Sensing (AWACS™) – nine levelsMulti-detector algorithm involves nearby detectors in alarm decision (U.S. Patent 5,627,515)Automatic detector sensitivity testing
Excel Life Safety System – XLS14085-3001 Speci�cation Data
One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6, or 7Up to 159 detectors (any mix) and 159 modules per SLCStandard 80-character display, 640-character large display, or display-less (a node on a network)Network option – 103 nodes supported (XLS140, XLS-NCA Network Annunciator) using wire or �ber-optic connectionsSelectable system sensor strobe synchronization
Excel Life Safety System – XLS-NCA85-3008 Speci�cation Data
640 character – enhanced LCD displayPrinter, CRT, and keyboard interfacesUser interface for all points in all nodes on the systemCan be used as a separate annunciator or combined in the XLS140 cabinetSupports additional 32 remote ACS annunciator modules
XLS3000 with Digital Voice Command74-4034 Speci�cation Data
One to ten isolated intelligent Signaling Line Circuits (SLC), Style 4, 6, or 7.Up to 159 detectors and 159 modules per SLC, 318 devices per loop/3,180 per FACP or network node.Large 16 line, 640 character LCD backlit display or use display-less as a network node.Network option supports the XLS3000, XLS140, XLS-NCA2 Network Annunciator, XLS-DVC-EM, and Honeywell Enterprise Buildings IntegratorTM (EBI).Support CLIP, FlashScan and Eclipse detector protocols4,000 event history �le in nonvolatile memory, plus a separate 1,000-event alarm-only �le.Autoprogramming, walk test, positive alarm sequence, and time scheduling.Honeywell SMART maintenance reporting.
Excel Life Safety System – LDM Series Graphic Annunciators85-3001 Speci�cation Data
Modular and expandable, graphic annunciators display the information required by each job siteLDM input/output modules communicate via RS485
••••••
•
•••
•
•
•••••
••
••
••
••
•
•
XLS-
NET
Tw
iste
d Co
pper
Pai
rXL
S-N
ET
Fibe
r Opt
ic C
able
XLS-
NET
Tel
epho
ne L
ines
Excel Life Safety System – XLS140/XLS3000Advanced Detection and Networking
Honeywell LifeSafety Manager™
Modules, Ampli�ers, Power Supplies and BoardsPart Number Function
3-LDSM LED display support module
3-24R (Y/G) 24 red LED display module (yel/grn)
3-12SR (Y/G) 12 switches/12 red led display/control modules (yel/grn)
3-12RY 12 red LED and 12 yellow LED display modules
3-12/S2Y 12 switches, each with 2 yellow LED display/control modules
3-12/S1GY 12 switches with one grn and one yel LED per switch
3-12/S1RY 12 switches with one red and one yellow LED per switch
3-6/3S1G2Y 6 groups of 3 switches; each switch has (1) grn, (2) yel LEDs
3-6/3S1GYR Control/display module with six groups of three switches; each switch has one grn, yel, red LED
3-ZA20A/B 20W zoned ampli�er; selectable for 70 or 25 Vrms operation
3-ZA40A/B 40W zoned ampli�er; selectable for 70 or 25 Vrms operation
3-ZA90 90W zoned ampli�er; selectable for 70 or 25 Vrms operation
3-PPS/M Primary power supply with local rail module 120v, 50/60 hz
3-IDC8/4 Initiating device circuit module
3-OPS O� premises signaling module
3-ASUFT Audio source unit with local microphone and �re�ghter’s telephone
3-CPU1 Main panel processor
3-LCD Main display interface with LCD
3-RS485A/B/R Network communication board
3-RS232 RS232 communication board
3-FIB/A Fiber optic communications interface
3-MODCOM(P) Modem communicator DACT with duplex V.32 bis 14.4K baud modem
3-NSHM1/2 Network short haul modem communications interface with modem connections
3-SAC Security control module
XLS-KPDISP Keypad/display module
XLS1000 Primary System ComponentsPart Number Function
3-DSDC Dual SIGA data controller with one SIGA data board; mounts to local rail
3-AADC Analog addressable data loop controller; mounts to local rail
Excel Life Safety System (XLS) – LAN Interface32004871 Series74-3444 Speci�cation Data
One XLS LAN Interface serves entire XLS200/1000 subsystem:- XLS system point display and command from any EBI workstation- Up to 40,000 points available from 64 XLS nodes- XLS points served via XLS high-speed peer network
Meets requirements of UL864 UOJZ for �re alarm control unit and UL1076 for security applications.24 Vdc power supplied directly from XLS1000
•
•
RS48
5 A
udio
& D
ata
Twis
ted
Copp
er P
air
Shor
t Hau
l Mod
ems
24 g
a Te
leph
one
Line
sA
udio
& D
ata
Fibe
r Opt
ic C
able
Flexible Network Communication
Topology
PRODUCT FEATURES:Honeywell LifeSafety Manager™ provides unprecedented protection of your building’s assets and occupants. This life-safety application incorporates:
Intelligent, microprocessor-based devices, including multi-sensor detectors that provide early warning of smoke and �re conditions, and virtual elimination of nuisance alarmsAdvanced distributed, digital audio communication system facilitating safe, orderly evacuation of occupants Rapid and reliable �re alarm controller peer-to-peer communications network Integral �re�ghters telephone communication system Emergency paging to support storm warning and hazardous materials (HazMat) noti�cation Control of the facilities’ HVAC equipment, such as fans and dampers, to contain smoke and create safe havens Releasing of �re doors to permit safe exit Sprinkler supervisory status of suppression systems, sprinkler valves, and �re pumps
Excel Life Safety System – XLS100074-2073 Speci�cation Data
Modular system designed for medium to large building and campus applications168-character LCD automatically displays system messages and alarms64 node, 160,000 points with 3-second alarm response over any size networkTotal network wiring over 300,000 ft (91,440m)250 devices per loop, 2500 devices per node750 ms signature loop alarm responseEvery point can be viewed and controlled from any nodeDigital storage and transmission of eight multiplexed channels of audio for unmatched intelligibilityLocal, proprietary and central station operations with integral alarm printer optionModem communicator option with DACT functionalityGraphic, text/LED, and keypad/display annunciator optionsListed for suppression releasing and smoke control applications
Excel Life Safety System – Envoy Annunciator74-3481 Speci�cation Data
High-contrast lines and textLCD displays custom text messages in graphic annunciator enclosure- Fire�ghters smoke control station options- Agency listed with Honeywell control panels- Surface or semi-�ush mounting with optional trim- Field-installed modi�cation of graphic with optional graphic transfer kit
Excel Life Safety System – Remote Annunciator74-2888 Speci�cation Data
Backlit LCD display provides 168 characters- Displays information important to user- Hands-free, �rst and last event with highest priorityLCD display uses queues to sort eventsVariety of cabinet con�gurations size the annunciator to the applicationProgrammable LED �ash ratesSlide-in custom labels
Excel Life Safety System – Flexible Network CommunicationsSupports communication on:Twisted pair copperSingle and multimode �ber optic cableExisting dry telephone lines
•
•
•••
•
••
••••••••
••••
••
•
••••
••••
Excel Life Safety System – XLS1000A High-Performance Life-Safety Solution
Excel Life Safety System (XLS) – Fire Network Adapter (FNA2)– Q7055B103974-3966 Speci�cation Data
TCP/IP network capableO�ers wide range of network connectivity optionsOnline system diagnostic supportUsing the XLS-NCM interface, up to 100 nodes can be connected to the EBI through a single interface.UL864 (UOJZ) 9th Edition listed for full control of the system.
•••••
Excel Life Safety Sensors
Model Type Features CompatibilityFS90 XLS1000 XLS140 XLS3000
Eclip
se S
erie
s TC906TC907TC908
PhotoelectricIonizationThermal
Built-in fault isolation and distributed intelligence for true Style 7 SLC operation.Peer-to-peer digital communication between devices minimizes interference and provides extremely fast response times to alarms.Smoke sensors include Aclimate™ self adjusting algorithm to maintain optimum sensitivity while minimizing false alarms.Heat sensors are con�gurable for Fixed temperature setpoint: 135°F (57°C), Rate-of-rise detection: 15°F/min-ute (8.3°C/minute). High temperature heat: 190°F (88°C).LED operation is con�gurable based on operating mode.Supports Honeywell SMART maintenance reporting per device.
••
•
•
••
Yes
Smok
e
TC806TC807
PhotoelectricIonization
Low-pro�le design, low current drawTamper-resistant wiring baseIntegral insect resistant screen to reduce nuisance alarmsDual LEDs provide 360-degree viewingOptional remote LED annunciatorBuilt-in test mechanism
••••••
Yes Yes Yes Yes
XLS-ISXLS-PS
IonizationPhotoelectric
Environmental compensationPre-alarm sensitivity capabilityContinuous self-diagnosis and storage of environmental and operational dataDay/night sensitivity adjustmentOne red and one green status LEDStandard, relay, and fault Isolator mounting basesDesign and manufacture per ISO 9001 standards
•••••••
YesYes
Hea
t
TC808 Thermal135° ROR/FT190° FT
Thermistor sensing circuit for fast responseRate-of-rise detection model availableDual sensor LEDs provide 360-degree viewingModern low-pro�le designCompatible with Honeywell CLIP and FlashScan loop transmission
•••••
Yes Yes Yes
XLS-HFS
XLS-HRS
Fixed Temperature135° FT
Rate of Rise
135°F (57°C) �xed temperature detector typeCombination 15°F (9°C) per minute minimum rate-of-rise and/or 135°F (57°C) �xed temperature detector typeElectronic addressing and device mappingContinuous self-diagnosis and storage of environmental and operational dataStandard, relay, and fault isolator mounting bases
•••••
Yes
Yes
Spec
ial A
pplic
atio
ns
TC840Acclimate
Multi-CriteriaPhotoelectricThermal
Automatically optimizes performance for each installed locationContinuous monitoring of detector sensitivityDigital pulse-width encoded communication with noise immunityCompatible with Honeywell CLIP and FlashScan™ intelligent
••••
Yes Yes Yes Yes
TC844Filtrex™
Harsh EnvironmentPhotoelectric
High-density Filtrex™ �lter eliminates the need for sensor cleaningsFiltrex™ �lter self-monitors clogs and reports a trouble condition at the panel when replacement is neededTwo sensor LEDs provide status indication at the control panelProvides rotary-decade switches to set sensor address
••••
Yes Yes Yes Yes
TC846Pinnacle™
Ultra-High Sensitivity Laser Smoke Detector0.02% - 2.00%/ftObscuration
Fast response to detect very early particles of combustionUltra-high sensitivity capabilityOn-board drift compensationTransient rejection algorithmsEnvironmental trackingWide sensitivity range
••••••
Yes Yes Yes Yes
TC847A Single-Ended Beam Smoke Detector 16 to 328 ft protection rangeSingle-ended, re�ective designUser friendly alignment procedureSix user selectable sensitivity levelsIntegral NFPA 72 sensitivity test featureRemovable plug-in terminal blocksDigital display for easy alignmentBuilt-in automatic gain control compensates for signal deterioration from dust build-upPaintable trim ring with enamel or acrylic-type paints
•••••••••
Yes Yes Yes Yes
XLS-IPHS MultiCriteriaIon, Photo, Heat
Environmental compensationWide 0.67 percent to 3.70 percent/ft. sensitivity rangePre-alarm sensitivity capabilityHigh ambient temperature operation (up to 100°F [38°C])
••••
Yes
XLS140/XLS3000 Primary System ComponentsCabinets, Chassis and Power Supplies
CHG-120 Battery Charger, 25 - 120 Ah Gel Cell; Mounts On Chs Chassis Or In Xls-Lbb Box.
CHS-2D Mounting Chassis For Xls-Nca2 Used In Xls-Abs-2D Cabinet Mounting Chassis For Xls-Nca2 Used In Xls-Abs-2D Cabinet
CHS-4MB 2Nd Row Chassis Assembly. Includes Mp-1B, Chs-4N (“N” Is The Chs-4 With Di�erent Depth), And Expander Ribbon Cable.
CHS-4N Chassis, Mounts Lcm-320/Lem-320, Xls-Lcm-320/Lem-320, Ncm-W/F. Mounts In Rows 2-4.
CHS-M2 Chassis Assembly- 1St Row; Order One For Each Xls-140.
HPF24S6 24VDC UL Listed Fire Alarm Nac Expander, 6A Syncronized
HPF24S8 24VDC UL Listed Fire Alarm Nac Expander, 8A Syncronized
HPF602ULADA 24VDC UL Listed Fire Alarm Nac Expander, 6A
HPF902ULADA 24VDC UL Listed Fire Alarm Nac Expander, 9A
SBB-x4 Primary system enclosure, red or black, 4 sizes available
XLS-ADDR-x4x Primary system enclosure door, red or black, matches SBB-x4, DVC applications.
XLS-DR-x4Bx Primary system enclosure door, red or black, matches SBB-x4
XLS-ABS-2D Annunciator Back Box, Surface (Or Semi-Flush)
Annunciator Modules and Controls
ACM-xxx ACS Annunciator; Up To 96 Points Of Annunciation With Alarm LED, Trouble LED And Switch Per Circuit.
ACM-8R Remote Form-C Relay Module. 8 Form-C Relays Driven By EIA-485.
LCD-80TM 80 Character Terminal Mode Only Lcd Annunciator.
LDM-32 Lamp Driver Annunciator Control Module. For Use With Custom Graphic Annunciators. 32 Points.
LDM-R32 Relay Module. 32 Form-A Contacts. Connects To Ldm-32 Or Ldm-E32.
SCS-8 Smoke Control Master; Includes Eight On/O�/Auto Switches.
SCS-8L Smoke Control Lamp Driver. Outputs For 8 On/O�/Auto Sw/LED’S. For Custom Built Smoke Control Stations.
Panel Circuits
UDACT Universal Digital Alarm Communicator Transmitter
DPI-232 Direct Panel Interface. Modem Interface For Direct Wire (No Dial-Up Capabilities) For Interconnecting Panels. Replaces Tpi-232 In Direct Wire Applications.
LCM-320 Loop Control Module, Clip/Flashscan
LEM-320 Loop Expander Module. Mounts As Daughter Board To Lcm-320 To Provide Even Numbered Slc Loops
Networking & Interfaces
NCM-x Network Control Module - Copper or Fiber Optic models available
RPT-485W Twisted Pair Eia-485 Repeater. Increase Eia-485 Capacity By 32 Devices. Mounts To Chs Chassis Position Or Abs-8R Box.
RPT-F Network Fiber Optics Repeater
BACNETGATEWAY Interface Between Xls-Net And Bacnet Protocol
XLS-NCM-EBI-F Ncm-F For Honeywell Ebi Only
XLS-PRN-6 80 Column Desktop Printer, 120 Vac.
Q7055B1039 Fire Network Adapter, Interface for EBI
XLS140 Equipment
KDM-2 Keyboard Display Module; 80-Character Display and Keypad
XLS140-CPU XLS140 Central Processing Unit - 120 Vac; Includes A Built-In Power Supply.
XLS-FDU-80 80 Character Display Annunciator - Horizontal Design
XLS-LCD-80 80 Character Lcd Annunciator - Vertical Design
XLS3000 Equipment
AMPS-24 Primary Power Supply For Xls3000, 120 Vac
CHS-M3 Mounting Chassis For XLS3000 CPU
LCD-160 Remote Annunciator For Xls3000, 160 Characters
XLS3000-CPUD XLS3000 CPU With Display
XLS-ELCM-320 Loop Control Module, Eclipse (Honeywell)
XLS-ELEM-320 Loop Expander Module, Eclipse (Honeywell)
XLS-NCA2 Network Control Annunciator, Honeywell
XLS-DVC Equipment
CMIC-1 Chassis With Paging Microphone
DAA-xxxx Digital Ampli�er, 120 Vac, 50 W, 25-70.7Vrms, Copper Or Fiber Optic Communication
DVC-AO Digital Voice Command, Analog Output
DVC-KD Digital Voice Command, Keypad
MIC-1 Paging Microphone Only
TELH-1 Fire�ghter’S Telephone Handset Only
XLS-DVC-EMx Digital Voice Command (Dvc), Expanded Memory, Copper Or Fiber Optic Communication
A Flexible, Highly Integrated CCTV Solution with Advanced Capabilities.
PRODUCT FEATURES:Software-based digital CCTV video management platform Uses o�-the-shelf PC, storage, and networking hardware Live viewing and playback while recordingCamera pan/tilt/zoom control from any client on the networkContinuous, scheduled, alarm, pre-alarm motion, and user-activated recording modesUp to 30fps performance on all channelsCommunicates using TCP/IP network protocol using industry-standard Ethernet technologiesFull integration with EBI including direct access to alarm recordings from EBI alarm/event summary displayHigh-speed SQL-based search engine (date, time, camera, operator, point, alarm)Digitally signed recordings and audit trailRedundant server for complete fault tolerance (optional)
DVM Database ServerManages the DVM system. Contains recording index, audit log, and web server(1) database server per system(1) optional redundant database server per system
Uses o�-the-shelf PC with the following minimum speci�cations:
Recommended Processor: Intel Pentium 4 or Xeon 3.2GHz or greater.System Memory (RAM): 1GB RAM minimum; 2GB recommended.Hard Drives: ................. Two separate hard drives (or sets of RAID drives).
Disk 1: 40GB Windows Operating System, DVM database server software, Microsoft SQL Server Software.Disk 2: 80GB DVM database �les, Microsoft SQL Server database �les.
Load Device: ................ CD ROMNetwork Connection: .... DELL onboard NIC or compatible NIC.
Must be 100MB or greater.Video Resolution: .......... 1024x768 pixels; 65k colors non-interlaced
DVM Camera ServerStores video streams and transmits video to clients. Number of database servers required dependent on application, minimum of (1) per system
Uses o�-the-shelf PC with the following minimum speci�cations:
Recommended Processor: Intel Pentium 4 or Xeon 3.2GHz or greater. Dual Intel Xeon (2 proces-sors or dual core) 3.2GHz or greater recommended for VMD
System Memory (RAM): 1GB RAM recommended (if pre-record is used).Hard Drives: ................. 40GB for operating system. Second disk or disk array for video recording stor-
age.Load Device: ................ CD ROMNetwork Connection: .... DELL onboard NIC or compatible NIC.
Must be 100MB or greater.Video Resolution: .......... 1024x768 pixels; 65k colors non-interlaced
Optional Video Storage Subsystem (Rorke Data or NexSan)Provides additional fault tolerant (RAID-5) video storage. Scales from 10’s to 100’s of terabytes. DVM supports any Windows 2000-compatible o�-the-shelf storage device including Direct or Network Attached Storage (DAS or NAS) or Storage Area Network (SAN) systems
Use Promise, NexSan or other o�-the-shelf storage subsystem with the following minimum speci�cations:
RAID Levels: ................. 0, 1, 3, 4, 5 and 6Redundancy: ................ Hot-swappable drives, hot-sparing, redundant power supplies, redundant RAID
controllerDrives Supported: ......... 4, 8, 14, or 42Drive Types: .................. Ultra ATA/133, Ultra ATA/100, or SATAData Rebuild: ................ 40GB storageRAID Controller: ............ RAID-5 fault tolerant storage, capacity dependent
on applicationSCSI Interface: .............. SCSI Ultra160O/S Supported: ............. Windows 2000/2003
Network SwitchesDVM Communicates using TCP/IP network protocol using industry-standard Ethernet technologies. The network switch links the video streamers to the camera server(s) andcamera servers to clients
Use o�-the-shelf storage network switches with the following minimum speci�cations:
Simple Network Management Protocol (SNMP)IEEE 802.1D bridging capability and loop detectionIEEE 802.1Q tagged VLANsIEEE 802.1 tra�c prioritization for multiple QoS levelsSupport for multicast tra�cNon-blocking, wire-speed access across all ports
IP Network Cameras
••••••••
•••
••••••
Honeywell Digital Video Manager™
Honeywell: .................... High Resolution “Box” Camera and Mini-Dome (August 2007)
Axis: ............................. 206, 207, 207W, 209FD/209FD-R, 207MW, 210, 210A, 211, 211A, 211M, 211W, 216FD/216FD-V, 225FD, 221, 223M
High Speed PTZ Domes18X, 23x, 25x and 35x zoom with indoor and outdoor housings.
Honeywell .................... ACUIX 18X, 23x, 25x and 35x zoom with indoor and outdoor housings. (August 2007)
Axis .............................. 212 PTZ, 213 PTZ, 214 PTZ, 215, 231D/232D, 231D+/232D+
Honeywell RapidEye – Streamer and Digital Video Recorder RapidEye Multi Media DSPRapidEye Multi MediaRapidEye Multi Media LITE
•••
Analog Cameras
Eight Channel Encoder/StreamerHoneywell .................... Coming Late 2007
Single/Multi Channel Encoder/StreamerHoneywell: .................... HNVE130A
Axis: ............................. 240Q, 240Q Blade, 241S, 241S Blade, 241SA, 241Q, 241Q Blade, 241QA, 243SA, 243Q
Analog CamerasFull range of cameras/lenses from entry level models through to Ultra Wide Dynamic models.
Fixed Camera
Honeywell: .................... L-Series, Ultra Wide Dynamic, Miniature High Resolution, Indoor mini-domes and indoor/outdoor vandal domes.
Other: ........................... Any NTSC or PAL analog camera
Analog Cameras
Analog Cameras
IP Network cameras combine the video encoding and streaming functions of the video streamer with a security camera. Digital video streams are transmitted across a standard LAN/WAN to DVM Camera Servers for indexing and storage.
Ethe
rnet
Pan/Tilt/Zoom (PTZ) Camera
Honeywell: .................... ACUIX 18X, 23x, 25x and 35x zoom with indoor and outdoor housings, RapidDome/VCL Orbiter, HD6 Series
Other: ........................... American Dynamics Speed Dome, Bosch AutoDome G3A, Canon VC-C3/C4/C4R, Daiwa DMP 15, Ernitec Orion, Lilin FastDome, Molynx Surcha, Panasonic WVCS850/854, Pelco SpectraDome, Sony EVI-D30/D31/G20/G21
Honeywell Asset LocatorA real-time active Radio Frequency Identi�cation (RFID) location tracking and monitoring solution for protecting the vulnerable in healthcare and museum environments.
APPLICATIONSInfant abduction deterrenceHigh-risk patient supervisionReal-time lost patient trackingUnauthorized baby handlingExit/entrance security supervisionHands-free access controlPatient movement and auditing24/7 wireless duress alarmingAsset location tracking and theft deterrenceSta� safety (location tracking and duress alarming
••••••••••
Honeywell Asset Locator™
Ethe
rnet
LON
i.LON 600 LonWorks /IP ServerProvides network connectivity between Ethernet LAN and the LONTalk (FTT-10A) bus
Handles up to 256 devicesUL Listed & CE compliantControls up to 9 physical layer repeaters
Physical Layer RepeaterExtends the IR/IR location reader network beyond 64 nodes and extends the length of
the free topology BUS by 1,640 feet/500 metersHandles up to 50 IR or RF location readers Up to 9 PLRs per LON channel (per iLON 1000® router)
Elpas IR Location ReaderA �xed, receiving device, easily ceiling or wall mounted that detects, processes and transmits over the LonTalk network the coded 433MHz infrared (IR) messages emitted by Elpas active RFID tags and badges.
Provides accurate room speci�c location data Factory programmed unique ID codeAdjustable circular coverage area, up to 40 feet/12.2 metersOn-board audiovisual status indicatorsArchitecturally attractive and unobtrusiveFCC & CE compliant
Elpas NXB External Relay Box An output interface for controlling external devices such as door locks, security lights and alarm annunciators
FCC & CE compliantMultiple Status LED indicatorsLocal connection to IR/RF location readersTwo normally open or normally closed relays Each relay handles up to 250V at 5.0 amps
Elpas RF Location ReaderA �xed, receiving device, easily ceiling or wall mounted that detects, processes and transmits over the LonTalk network the coded radio frequency (RF) transmission mes-sages emitted by Elpas active RFID tags and badges.
Provides general area location dataFactory programmed unique ID codeAdjustable circular coverage area up to 40 feet/12.2 metersOn-board audiovisual status indicatorsArchitecturally attractive and unobtrusiveFCC & CE compliant
Elpas Low Frequency ExciterA �xed, low power wireless emitter, easily ceiling or wall mounted, that adds instanta-neous exit/entrance security intervention alarming to any RFID installation.
Pinpoint detection functionality for doorways and open entrance/exit areas.Factory programmed unique ID codeGenerates an adjustable sphere shaped magnetic (125 KHz) �eld up to 10 feet/3.0 metersMaster/Slave con�gurations for double doors or larger open areasArchitecturally attractive and unobtrusiveFCC & CE compliant
Elpas EJB Junction BoxA low voltage type junction box for interconnecting the RF/IR location readers, the LF Exciters, the LON data BUS and the 24V/DC power supply.
Power status LED indicatorSmall, lightweight, unobtrusiveFCC & CE compliant
Elpas Infant Protection BraceletComprised of a rechargeable tag attached to a disposable non-latex tamper anklet band the bracelet provides 24/7 automatic infant abduction identi�cation and safety protection.
Automatic tampering and removal warningsSupports exit/entrance security intervention alarmingAdjustable, latex-free disposable anklet bandsTriple technology RF/IR/LF signaling technologiesUltra-small, easy to clean tag designTough, shock proof, IP66 water-rated tag housingInternal rechargeable Lithium ion battery packCE and FCC compliant
Elpas Healthcare Positioning TagIntended for the real-time monitoring and tracking of patients or medical personnel, wireless duress signaling and hands-free access control.
Supports exit/entrance security intervention alarming Single-button, wireless nurse call/personnel duress alert signalingTriple technology RF/IR/LF signaling technologiesWatchband, disposable wrist band, pendant lanyard optionsSmall tag size and weightTough, shock proof, IP66 environmental housingCompact Lithium long-life replaceable batteryCE and FCC compliant
Elpas High Risk Patient BraceletComprised of a rechargeable tag attached to a disposable non-latex tamper wrist band, the bracelet delivers automatic 24/7 real-time location tracking of patients that exhibit a high-probability of Wandering or Elopement.
Automatic tampering and removal warningsSupports exit/entrance security intervention alarmingAdjustable, latex-free disposable wrist bandsTriple technology RF/IR/LF signaling technologiesUltra-small, easy to clean tag designTough, shock proof, IP66 water-rated tag housingInternal rechargeable Lithium ion battery packCE and FCC compliant
Elpas Personnel BadgeEngineered to look like an industry-standard photo ID personnel badges, the device provides real-time monitoring and location tracking of personnel or visitors, wireless duress signaling and hands-free access control
Supports exit/entrance security intervention alarmingSingle-button nurse call/personnel duress alert signalingTriple technology RF/IR/LF signaling technologiesTough, shock proof, water resistant housingCompact Lithium long-life replaceable batteryCE and FCC compliant
Elpas Asset Tracking TagUsed for the real-time monitoring and tracking of portable assets or individuals; wire-less duress signaling and hands-free access control.
Automatic asset tampering and removal warningsSupports exit/entrance security intervention alarmingOptional wireless emergency or duress signalingTriple technology RF/IR/LF signaling technologiesAsset, belt clip or pendant mounting optionsUltra-small tag size and weightTough, shock proof, IP64 environmental rated housingCompact Lithium long-life replaceable batteryCE and FCC compliant
•••
••
••••••
•••••
••••••
•••
•••
•••
••••••••
••••••••
••••••••
••••••
•••••••••
System Description
Base System Includes 50 meters
Meter Pack Option 1 10 meter
Meter Pack Option 2 50 meter
Meter Pack Option 3 100 meter
Meter Pack Option 4 250 meter
Meter Pack Option 5 1000 meter
Options
Advanced Energy Modeling Adder to base
Enterprise Load Management Adder to base
Web Reporting Adder to base
Weather Data Adder to base
Architecture RequirementsEnergy Manager must be installed on its own dedicated server and interfaced to your existing facility management network via open system integration
•
Ethe
rnet
Energy Manager - Understand and Control Energy
PRODUCT FEATURES:“Out-of-the-box” solution for energy data collection, validation, analysis, and reportingFlexible, hierarchical modeling of your facility, plant and metersAutomatic data cleaning removes or reduces the impact of meter failures, dropouts, and spikesExceptionally powerful reporting and analysis. Compatible with most utility meters and sub-meters. Supports electric, gas, water, fuel oil, and other meter typesAutomatic load shedding and generator control based on demand limits and con�gurable algorithmsEnergy load forecasting Weather data can be read from local weather stations or the internet for use in reporting and analysisGreenhouse gas emission tracking
••••
••••
Honeywell Energy Manager™
Utilities/Meters SupportedElectricalGasWaterLiquid FuelSteam and Super Heated SteamChilled & Heated WaterSolid FuelsCompressed Air
••••••••
Meter ManagementModbusPulse Accumulators/TotalizersLonWorksOPCEXCEL 5000BACnetData validation and estimationThermal calculationsVirtual metersText-�le importEquipment run-hours
•••••••••••
MetersVeris Industries (www.veris.com)Power Measurement Limited (www.pwrm.com)Square D (www.squared.com)WattNode by Continental Controls (www.ccontrolsys.com)
••
••
TCP/IP
LON
LonWorksMeter
Pulse
Pulse
LonWorksWireless Meter
EXCEL 500
i.LON® 600 RouterProvides network connectivity between Ethernet LAN and LONTalk (FTT-10A) bus
Wireless MetersModHopperELPROIO Select
•••
Bene�ts of Energy ManagerIdentify and reduce peak energy demands that are driving up costs Implement powerful load curtailment strategiesValidate and understand utility dataOptimize equipment start and stop timesNegotiate lower energy ratesUncover employee equipment overrides that increase costs
Energy Manager FoundationEnergy Manager Foundation is built upon modeling your Energy System. This model describes the objects within your facility, and the relationships between them. Objects that can be integrated into your Energy System Model include:
Meters (real and virtual)Localities (geographical locations, campus, building, �oor, & central plant building area)Equipment (AHU, lighting, boiler, chiller, generator, etc. general)Circuits (grouping of loads and generators)TenantsWeather stations
Cost AllocationRate design & utility tari� modelingTenant billing and utility bill validationSupports time-of-use, seasonal charges, peak demand, taxes, and tiered chargesInvoice management and reporting
Web ReportingIntuitive pre-built reports accessible from your web browserScheduled email delivery of reports
Facility Demand ManagementLoad monitoring with automatic alarming and event loggingAutomatic load shedding and generator control can be managed according to various algorithms to curtail costly spikes in demand peaksLoad management operator displays provide real-time visualization and tuning
Energy Load ForecastingBatch oriented forecasting tool that predicts energy demand based on historical usageUses local-regression technology to forecast future energy demandForecasts hourly consumption 45 days in advanceForecasts regularly re-computed as the horizon decreases
Rates EngineCon�gures tari�s in the systemCalculate individual charges and total costsDi�erent rates can be applied depending on level of consumption or time of use
Rate BuilderEngineering con�guration tool for modeling rates (tari�s)
••••••
••••••
••••
••
••
•
••••
•••
•
InternationalizationEnergy Manager is available in local languages
Server and Client RequirementsPer current EBI Release
LicensingEnergy Manager Foundation license model is based upon the total number of meters. An initial 50 meters are included with this licenseAdditional meters can be added in 10-pack incrementsAdvanced Energy Modeling, Enterprise Load Management and Web Reporting are sold as add-on options to Energy Manager Foundation
•
•
•
••
Honeywell, Enterprise Buildings Integrator (EBI), EXCEL 5000 OPEN, Excel Building Supervisor (XBS), Excel Building Supervisor Integrated (XBSi), ComfortPoint, Excel Plus, Excel Classic, Excel 800, Excel 500, Smart Excel 500, Excel 50, Excel 10, Energy Manager, Asset Locator, Excel Security Manager, Excel Life Safety (XLS/XLS140/XLS1000/XLS3000), Eclipse, Delta 1000, Delta 2000, Intelliguard 9000 (i9000), Temaline, Galaxy, Vista, and DeltaNet FS90 are trademarks of Honeywell International, Inc. All other brands are trademarks of their respective companies.
Modbus is a registered trademark of the Modbus Organization, Inc.
Above information subject to change without notice. Printed in the USA on recycled paper containing 10% post consumer waste.
77-2148June 2007© 2007 Honeywell International Inc.
