1

TUBE FORGED

SALAP (KALITALA)HOWRAH – 711409

: 033- 2653 5330, 2640 0526/3092FAX : 033-2640 3092

MANUFACTURARS & SUPPLIERS OF WIDE RANGE

OF FORGED PIPE FITTINGS & FLANGES

2

TUBE FORGED IS A VASTLY EXPERIENCED ORGANIZATION MANUFACTURING BUTT-WELD PIPE FITTINGS WAS ESTABLISHED IN 1994 AT SALAP (100 METERS AWAY FROM NH6), HOWRAH, WEST BENGAL. IT IS REGISTERED WITH “SSI” & “NSIC” UNIT UNDER GOVERNMENT OF INDIA AS WELL AS WITH “MECON LTD.”, “DAUSTUR CO.”, “SAIL (DSP)”. “SAIL (RSP-KC10 PROJECT)”, “TATA STEEL LIMITED (KPO)” “IBR (W.B.)”. EARLIER TUBE FORGED STARTED MANUFACTURING WITH A MANUAL OPERATED BALL PRESS MACHINE BUT GRADUALLY IT DEVELOPED ITS MACHINERY & TECHNOLOGY & ALSO INTRODUCED EXTRUDER BENDING MACHINE & TEE FORMING MACHINE ETC. WHICH ARE REQUIRED FOR PRODUCING QUALITY BUTT-WELD PIPE FITTINGS AND FORGED FITTINGS OF CARBON STEEL & STAINLESS STEEL OF VARIOUS TYPES & SIZES CONFORMING TO NATIONAL / INTERNATIONAL SPECIFICATION TO MEET THE REQUIREMENT OF ITS VALUED & REPUTED CUSTOMERS LIKE “SAIL”, “TATA STEEL LTD.”, “BHUSHAN POWER & STEEL LTD.”, “VOLTAS LTD.”, “JUSCO LTD.”, “NICCO CORPORATION LTD.”, “MCNALLY BHARAT ENGG. CO LTD.”, “BLUE STAR LTD.”, “SHRIRAM EPC LTD.” ETC.

3

LIST OF MECHINERY

* MANDREL PROCESS / EXTRUDER ELBOW BENDING MACHINE* TEE FORMING MACHINE * FURNACE (OIL FIRED) * NORMALISING FURNACE WITH RECORDER (OIL FIRED) * HYDRAULIC PRESS * PIPE/BILLET CUTTING MACHINE * LATH MACHINE * DRILL MACHINE * ELECTRIC WINCH * PEDESTAL GRINDER * FLEXIBLE GRINDER * STRAIGHT GRINDER * ANGLE GRINDER * WELDING GENERATOR * GAS CUTTING SET * CHAIN PULLEY BLOCK * TOOL GRINDER * GENERATOR SETS * OVERHEAD CRAIN LINE ETC TO FULFIL CLIENTS REQUIREMENTS AT LEAST TIME

TUBE FORGED one of the leading organization who manufactured Butt-weld pipe fittings, Forged fittings as per NATIONAL / INTERNATIONAL specification,

TUBE FORGED having the following MANUFACTURING FACILITIES at our factory premises.

4

PRODUCT RANGE (IBR & NON-IBR)

N.B.: FEBRICATION JOB ALSO DONE AS PER CLIENTS DRAWING

ITEM SIZE MATERIAL

BW ENDS FITTINGS (TEE, ELBOW, REDUCER, CAP)

15 NB to 600 NB CARBON STEEL SEAMLESS & ERW

25 NB to 600 NB STAINLESS STEEL

SW ENDS FITTINGS (TEE, ELBOW, REDUCING COUPLING, HALF & FULL COUPLING, ELBOWLET,

SOCKOLET etc.)

15 NB to 50 NBFORGED, CARBON STEEL,

STAINLESS STEEL & GALVANISED

THREAD FITTINGS (TEE, ELBOW, REDUCING COUPLING,

HALF & FULL COUPLING, ELBOWLET, THREDOLET, NIPPLE etc)

15 NB to 50 NBFORGED, CARBON STEEL,

STAINLESS STEEL & GALVANISED

FORGED FLANGE 15 NB to 500 NBFORGED, CARBON STEEL,

STAINLESS STEEL & GALVANISED

PLATE FLANGE (IS: 6392) 15 NB to 3000 NB CARBON STEEL & STAINLESS STEEL

“Ω - Type” EXPANSION BEND 25 NB to 200 NB CARBON STEEL

5

MANUFACTURING PROCESS

6

PRODUCT

UNEQUAL TEE

450 ELBOW

450 ELBOW 900 ELBOW EQUAL TEE

COUPLING

BLRF FLANGE WNRF FLANGE SORF FLANGE

SWRF FLANGE

7

TESTING & INSPECTION

* HARDNESS TEST MACHINE * ULTRASONIC THICKNESS GAUGE * TOUNG CALLIPER * ANGLE PLATE * VERNIER, INSIDE, OUTSIDE CALLIPER * D.P. TESTING ARRANGEMENT * DIAL, BEVEL GAUGE * HYDRO TEST MACHINE

TUBE FORGED has fully equipped & inspection department managed by quality management system.

Dimensionally checking is carried out by our companies’ experiences skilled worker for the basic needs in manufacturing quality fittings. We also carried out Chemical & physical test

as per ASTM, IS, BS, DIN from govt. approved laboratories.

* TO SATISFY CLIENTS WITH BEST QUALITY

8

• The raw materials are procured with proper mill test certificate if mill test certificate is not available then check test analysis is carried out

• All products are visually checked for any defects shrinkage, cracks during manufacturing process. In case of any defect found during inspection send to take necessary action

• We also check hardness at random.

• All the fittings manufactured are frequently checked during machining in all dimension and thread. All thread are checked by go and no go gauges to ensure proper fittings for seal tightness.

• All machining products are checked by our quality management personnel.

• All finished products are marked with proper size, pressure rating, schedule, material specification, heat/lot no. as per required code.

• All fittings are surface coating/acid pickling, sort/sand blasting as per specified code and visually checked for any defect as well as packaging properly to avoid damages during storage or transit.

QUALITY CONTROL

9

LIST OF CLIENTS

N.B. : WE SUPPLY OUR PRODUCT IN VARIOUS STEEL PLANTS, OIL SECTOR & FERTILIZERS PLANTS THROUGH OUR CLIENTS

10

REGISTRATION CERTIFICATE

900 ELBOW EQUAL TEE

MECON LIMITED SAIL, DSP

11

REGISTRATION CERTIFICATE

IBR, WEST BENGAL SAIL, RSP

12

REGISTRATION CERTIFICATE

NSIC SSIC

13

INSPECTION CERTIFICATE

LLOYDS REGISTER ASIA M. N. DASTUR & CO. (P) LTD

14

TUBE FORGEDSALAP (KALITALA)HOWRAH – 711409

: 033- 26535330, 26400526/3092FAX : 033-2640 3092

WEBSITE : www.tubeforged.com E-mail : tube.forged.hazra@gmail.com

sales@tubeforged.comarindam@tubeforged.com