TS SL 7 | TS SL 10 | TS SL 6 | TS SL 6.0 | TS SL - CARiD.com · 2019. 1. 22. · adv5 | ts sl adv005 | ts sl adv7.0 | ts sl adv15 | ts sl adv7 | ts sl adv5.0 | ts sl adv6.2 | ts sl

http://www.carid.com/advanceone-wheels/

The ADV.1 Wheel line consists of lit-erally hundreds of style / configura-tion combinations. In order to find the ADV.1 wheel that best suits your indi-vidual style, performance expecta-tions and budget, we’ve developed this step by step selection process

The ADV.1 Wheel line consists of lit-erally hundreds of style / configura-tion combinations. In order to find the ADV.1 wheel that best suits your indi-vidual style, performance expecta-tions and budget, we’ve developed this step by step selection process which will allow you to easily find the wheel that’s right for you.which will allow you to easily find the wheel that’s right for you.

ADV.1 Wheels are offered in all of the 15 styles shown above. These ex-amples are shown in our 3 Piece Track Spec SL Series Configuration. The following pages provide informa-tion pertaining to each wheel con-figuration.

ADV.1 Wheels are offered in all of the 15 styles shown above. These ex-amples are shown in our 3 Piece Track Spec SL Series Configuration. The following pages provide informa-tion pertaining to each wheel con-figuration.

ADV5 | TS SLADV5 | TS SL ADV005 | TS SLADV005 | TS SL ADV7.0 | TS SLADV7.0 | TS SL ADV15 | TS SLADV15 | TS SL ADV7 | TS SLADV7 | TS SL

ADV5.0 | TS SLADV5.0 | TS SL ADV6.2 | TS SLADV6.2 | TS SL ADV05 | TS SLADV05 | TS SL ADV08 | TS SLADV08 | TS SL ADV8 | TS SLADV8 | TS SL

ADV6.0 | TS SLADV6.0 | TS SLADV5.2 | TS SLADV5.2 | TS SL ADV10.0 | TS SLADV10.0 | TS SL ADV10 | TS SLADV10 | TS SL ADV6 | TS SLADV6 | TS SL

ALL 15 ADV.1 WHEEL STYLES SHOWN BELOW ARE AVAILABLE IN ALL CONFIGURATIONSExamples below are shown in 3 Piece TRACK SPEC SL Series ConfigurationALL 15 ADV.1 WHEEL STYLES SHOWN BELOW ARE AVAILABLE IN ALL CONFIGURATIONSExamples below are shown in 3 Piece TRACK SPEC SL Series Configuration

STYLE OVERVIEWSTYLE OVERVIEW


ADV5.0 | TS SLADV5.0 | TS SL ADV6.2 | TS SLADV6.2 | TS SL ADV05 | TS SLADV05 | TS SL ADV08 | TS SLADV08 | TS SL ADV8 | TS SLADV8 | TS SL

ADV6.0 | TS SLADV6.0 | TS SLADV5.2 | TS SLADV5.2 | TS SL ADV10.0 | TS SLADV10.0 | TS SL ADV10 | TS SLADV10 | TS SL ADV6 | TS SLADV6 | TS SL

ALL 15 ADV.1 WHEEL STYLES SHOWN BELOW ARE AVAILABLE IN ALL CONFIGURATIONSExamples below are shown in 3 Piece TRACK SPEC SL Series ConfigurationALL 15 ADV.1 WHEEL STYLES SHOWN BELOW ARE AVAILABLE IN ALL CONFIGURATIONSExamples below are shown in 3 Piece TRACK SPEC SL Series Configuration

STYLE OVERVIEWSTYLE OVERVIEW

ALL 15 ADV.1 WHEEL STYLES ARE AVAILABLE IN THE ADV.1 M.V2 FORGING CONFIGURATION ALL 15 ADV.1 WHEEL STYLES ARE AVAILABLE IN THE ADV.1 M.V2 FORGING CONFIGURATION

M.V2 | SERIESM.V2 | SERIESTheTheThe M.V2|Series, or “2 Piece Monoblock” was released to the public at the 2012 SEMA Con-vention and has since become one of our most popular options. Many improvements have been made for 20a14 including newly updated files based on FEA computer simulated testing developments and constant strength & weight reduction adjustments.

The M.V2|Series, or “2 Piece Monoblock” was released to the public at the 2012 SEMA Con-vention and has since become one of our most popular options. Many improvements have been made for 20a14 including newly updated files based on FEA computer simulated testing developments and constant strength & weight reduction adjustments.reduction adjustments.

reduction adjustments.

M.V2 | FEATURESM.V2 | FEATURES

Applicable styles:Available in all 15 ADV.1 Wheel styles

Sub configurations:M.V2 Standard / M.V2 | SL Series & our new M.V2 CS | Series applicable

Assembly hardware options:Blind or visible assembly hardware options available to all M.V2 styles

Available diameters:


Sub configurations:M.V2 Standard / M.V2 | SL Series & our new M.V2 CS | Series applicable

Assembly hardware options:Blind or visible assembly hardware options available to all M.V2 styles

Available diameters:Available diameters:18.0 - 22.0 inch diameters

Available widths:4.5 - 13.5 inch widths

Finishe options:Fully customizable finish options

Applicable vehicle applications:Available for all applications / PCD’s / Offsets / CB’s, etc.

Available diameters:18.0 - 22.0 inch diameters

Available widths:4.5 - 13.5 inch widths


Applicable vehicle applications:Available for all applications / PCD’s / Offsets / CB’s, etc. Available for all applications / PCD’s / Offsets / CB’s, etc.

Available for all applications / PCD’s / Offsets / CB’s, etc.

The M.V2 Forging configuration by ADV.1 fea-tures a revolutionary 2 piece monoblock con-struction, developed & engineered in late 2011, the M.V2’s primary focus is to provide a lightweight, forged aluminum, individually en-gineered to order alternative to the forged monoblock. The M.V2 provides an entirely

The M.V2 Forging configuration by ADV.1 fea-tures a revolutionary 2 piece monoblock con-struction, developed & engineered in late 2011, the M.V2’s primary focus is to provide a lightweight, forged aluminum, individually en-gineered to order alternative to the forged monoblock. The M.V2 provides an entirely new look combining 3 piece versatility with 1 piece performance & ride quality. Available for all applications.

new look combining 3 piece versatility with 1 piece performance & ride quality. Available for all applications.

M.V2M.V2M.V2FORGED MONOBLOCK V2.0FORGED MONOBLOCK V2.0

M.V2 SL SERIESM.V2 SL SERIES

ADV5 | M.V2 SLADV5 | M.V2 SL

ADV5.0 | M.V2 SLADV5.0 | M.V2 SL ADV6.2 | M.V2 SLADV6.2 | M.V2 SL ADV10 | M.V2 SLADV10 | M.V2 SL ADV6 | M.V2 SLADV6 | M.V2 SL ADV8 | M.V2 SLADV8 | M.V2 SL

ADV6.0 | M.V2 SLADV6.0 | M.V2 SL

ADV005 | M.V2 SLADV005 | M.V2 SL

ADV08 | M.V2 SLADV08 | M.V2 SL ADV05 | M.V2 SLADV05 | M.V2 SL ADV7.0 | M.V2 SLADV7.0 | M.V2 SL

ADV5.2 | M.V2 SLADV5.2 | M.V2 SL ADV7 | M.V2 SLADV7 | M.V2 SL ADV10.0 | M.V2 SLADV10.0 | M.V2 SL ADV15 | M.V2 SLADV15 | M.V2 SL


ADV5 | M.V2 SLADV5 | M.V2 SL ADV005 | M.V2 SLADV005 | M.V2 SL ADV7.0 | M.V2 SLADV7.0 | M.V2 SL ADV15 | M.V2 SLADV15 | M.V2 SL ADV7 | M.V2 SLADV7 | M.V2 SL



ADV05 | M.V2 SLADV05 | M.V2 SL ADV08 | M.V2 SLADV08 | M.V2 SL ADV8 | M.V2 SLADV8 | M.V2 SL

ADV5.2 | M.V2 SLADV5.2 | M.V2 SL ADV10.0 | M.V2 SLADV10.0 | M.V2 SL ADV10 | M.V2 SLADV10 | M.V2 SL ADV6 | M.V2 SLADV6 | M.V2 SL

ADV5.0 | TS SLADV5.0 | TS SL




ADV05 | TS SLADV05 | TS SL ADV08 | TS SLADV08 | TS SL ADV8 | TS SLADV8 | TS SL

ADV5.2 | TS SLADV5.2 | TS SL ADV10.0 | TS SLADV10.0 | TS SL ADV10 | TS SLADV10 | TS SL ADV6 | TS SLADV6 | TS SL

TRACK SPEC | SERIESTRACK SPEC | SERIESTheTheThe Track Spec SL Forging configuration by ADV.1 Wheels. Our Flagship Series, the SL Line has become our most advanced, and sought after wheel option since it’s release in early 2011. Now completely updated, improved & re-designed entirely for 2013, the Track Spec SL Series remains the industry’s most advanced,

The Track Spec SL Forging configuration by ADV.1 Wheels. Our Flagship Series, the SL Line has become our most advanced, and sought after wheel option since it’s release in early 2011. Now completely updated, improved & re-designed entirely for 2013, the Track Spec SL Series remains the industry’s most advanced, respected wheel option available

respected wheel option available

TRACK SPEC | SERIESTRACK SPEC | SERIES

TRACK SPEC | FEATURESTRACK SPEC | FEATURESApplicable styles:Available in all 15 ADV.1 Wheel styles

Sub configurations:TS | Standard / TS | SL Series & our new M.V2 TS | Series applicable

Assembly hardware options:Blind or visible assembly hardware options available

Available diameters:


Sub configurations:TS | Standard / TS | SL Series & our new M.V2 TS | Series applicable

Assembly hardware options:Blind or visible assembly hardware options available

Available diameters:Available diameters:18.0 - 22.0 inch diameters

Available widths:4.5 - 15.5+ inch widths






Applicable vehicle applications:Available for all applications / PCD’s / Offsets / CB’s, etc. Available for all applications / PCD’s / Offsets / CB’s, etc.






ADV05 | TS SLADV05 | TS SL ADV08 | TS SLADV08 | TS SL ADV8 | TS SLADV8 | TS SL

ADV5.2 | TS SLADV5.2 | TS SL ADV10.0 | TS SLADV10.0 | TS SL ADV10 | TS SLADV10 | TS SL ADV6 | TS SLADV6 | TS SL

TheTheThe ADV.1 Track Function SL Series configurations. Designed & engineered around our goal with to provide a wheel with the same quality, materials, assembly and reliability as all of our wheels, however at a lower, entry level price point. The ADV.1 entry level option is comparable in quality and style to other brands flagship offerings, while maintaining a competitive price point & ADV.1’s strict quality standards and build quality.

The ADV.1 Track Function SL Series configurations. Designed & engineered around our goal with to provide a wheel with the same quality, materials, assembly and reliability as all of our wheels, however at a lower, entry level price point. The ADV.1 entry level option is comparable in quality and style to other brands flagship offerings, while maintaining a competitive price point & ADV.1’s strict quality standards and build quality.


Sub configurations:TF | Standard / TS | SL Series applicable

Assembly hardware options:Non SL TF: visible assembly hardware options onlySL Series options available in both blind bolt or exposed hardware options


Sub configurations:TF | Standard / TS | SL Series applicable

Assembly hardware options:Non SL TF: visible assembly hardware options onlySL Series options available in both blind bolt or exposed hardware optionsSL Series options available in both blind bolt or exposed hardware options




Applicable vehicle applications:

SL Series options available in both blind bolt or exposed hardware options




Applicable vehicle applications:Applicable vehicle applications:Available for all applications / PCD’s / Offsets / CB’s, etc.


ADV5.0 | TF SLADV5.0 | TF SL

ADV5 | TF SLADV5 | TF SL ADV005 | TF SLADV005 | TF SL ADV7.0 | TF SLADV7.0 | TF SL ADV15 | TF SLADV15 | TF SL ADV7 | TF SLADV7 | TF SL



ADV05 | TF SLADV05 | TF SL ADV08 | TF SLADV08 | TF SL ADV8 | TF SLADV8 | TF SL

ADV5.2 | TF SLADV5.2 | TF SL ADV10.0 | TF SLADV10.0 | TF SL ADV10 | TF SLADV10 | TF SL ADV6 | TF SLADV6 | TF SL

||

ADV5.0 | M.V2 CSADV5.0 | M.V2 CS ADV5.2 | M.V2 CSADV5.2 | M.V2 CS ADV05 | M.V2 CSADV05 | M.V2 CS ADV15 | M.V2 CSADV15 | M.V2 CS ADV10 | M.V2 CSADV10 | M.V2 CS

||

1 piece forged monoblock constructionAvailable in diameters 19.0-23.0 inchWidths range from 8.5-13.0 All applications applicable Lightest option for most vehicles

1 piece forged monoblock constructionAvailable in diameters 19.0-23.0 inchWidths range from 8.5-13.0 All applications applicable Lightest option for most vehicles

M.V1M.V1||ADV5.0 M.V1ADV5.0 M.V1

2 piece forged “mono-center”Available in diameters 18.0-22.0 inchWidths range from 4.5-15.0+ All applications applicable Exposed or hidden hardware option

2 piece forged “mono-center”Available in diameters 18.0-22.0 inchWidths range from 4.5-15.0+ All applications applicable Exposed or hidden hardware option

M.V2M.V2||ADV5.0 M.V2ADV5.0 M.V2

3 piece forged / step lip constructionAvailable in diameters 17.0-22.0 inchWidths range from 4.5-15.0+ All applications applicableExposed or hidden hardware option

3 piece forged / step lip constructionAvailable in diameters 17.0-22.0 inchWidths range from 4.5-15.0+ All applications applicableExposed or hidden hardware option

TSTS ||ADV5.0 TRACK SPECADV5.0 TRACK SPEC

Competition Spec Series | AVAILABLE IN OUR M.V1, M.V2 & TRACK SPEC Forging configurations.The CS Series performance upgrade is offered in 3 different forging configurations. Each version has it’s aesthetic and performance characteristics as well as price level, cus-tomization options, etc. See details listed below. The ADV5.0 Style is used as an example of each configuration as to show the variations between each configuration within 1 style of wheel. All CS Series wheel styles shown above are applicable to these configurations.

Competition Spec Series | AVAILABLE IN OUR M.V1, M.V2 & TRACK SPEC Forging configurations.The CS Series performance upgrade is offered in 3 different forging configurations. Each version has it’s aesthetic and performance characteristics as well as price level, cus-tomization options, etc. See details listed below. The ADV5.0 Style is used as an example of each configuration as to show the variations between each configuration within 1 style of wheel. All CS Series wheel styles shown above are applicable to these configurations.

||

ADV05 | TRACK SPEC CSADV05 | TRACK SPEC CS ADV5.0 | M.V1 CSADV5.0 | M.V1 CS3 PIECE STEP LIP CONFIGURATION W/ EXPOSED TITANIUM HARDWARE3 PIECE STEP LIP CONFIGURATION W/ EXPOSED TITANIUM HARDWARE 1 PIECE FORGED MONOBLOCK 1 PIECE FORGED MONOBLOCK

ADV5.2 | TRACK SPEC CSADV5.2 | TRACK SPEC CS3 PIECE STEP LIP CONFIGURATION W/ EXPOSED TITANIUM HARDWARE3 PIECE STEP LIP CONFIGURATION W/ EXPOSED TITANIUM HARDWARE

||

M.V1SERIES | FEATURESM.V1SERIES | FEATURES

M.V1SERIESM.V1SERIES

Available in all 15 ADV.1 Wheel styles

Standard M.V1 / M.V1 | SL Series & our 2014 M.V1 CS | Series options are all applicable

18.0 - 22.0 inch diameters

8.5 - 13.0 inch widths

Fully customizable finish options



Standard M.V1 / M.V1 | SL Series & our 2014 M.V1 CS | Series options are all applicable





TheTheThe M.V1 Forging configuration by ADV.1 fea-tures a 1 piece monoblock construction. The M.V1’s primary focus is to provide a light-weight, forged aluminum, individually engi-neered to order, forged monoblock. The M.V1 provides a high performance oem upgrade, improved ride quality and an aggressive

The M.V1 Forging configuration by ADV.1 fea-tures a 1 piece monoblock construction. The M.V1’s primary focus is to provide a light-weight, forged aluminum, individually engi-neered to order, forged monoblock. The M.V1 provides a high performance oem upgrade, improved ride quality and an aggressive “ADV.1” stance. Available for all makes & models in sizes 18.0-23.0 inch diameters with widths ranging from 8.5-13.0 inches.

“ADV.1” stance. Available for all makes & models in sizes 18.0-23.0 inch diameters with widths ranging from 8.5-13.0 inches.

M.V1 | SERIESM.V1 | SERIES

TRUCK SPEC | FEATURESTRUCK SPEC | FEATURES

TRUCK SPEC SERIESTRUCK SPEC SERIES


Available in 3 piece flat profile TF | SL version shown above in the ADV6 SL style

Available in 2 piece concave profile version w/ welded high strength assembly flange for high payload applications

Blind or visible through bolt assembly flange options available to all 3 piece styles / no hardware options for welded version


4.5 - 15.0+ inch widths



Available in 3 piece flat profile TF | SL version shown above in the ADV6 SL style

Available in 2 piece concave profile version w/ welded high strength assembly flange for high payload applications

Blind or visible through bolt assembly flange options available to all 3 piece styles / no hardware options for welded version



Fully customizable finish optionsFully customizable finish options




DEEPSPEC | SERIES | FEATURESDEEPSPEC | SERIES | FEATURES

DEEPSPEC|SERIESDEEPSPEC|SERIES


Standard Track Spec | SL Series & our 2014 Track Spec CS | Series options are all applicable

Blind / reverse or visible through bolt assembly flange options available






Standard Track Spec | SL Series & our 2014 Track Spec CS | Series options are all applicable

Blind / reverse or visible through bolt assembly flange options available




Available for all applications / PCD’s / Offsets / CB’s, etc. Available for all applications / PCD’s / Offsets / CB’s, etc.


DEEPCONCAVESERIES | FEATURESDEEPCONCAVESERIES | FEATURES

DEEPCONCAVESERIESDEEPCONCAVESERIES


Standard DC & DC | SL Series options are all applicable

Blind or (SL Series only) visible through bolt assembly flange option

19.0 - 22.0 + 24.0 inch diameters (excluding 23.0”)





Standard DC & DC | SL Series options are all applicable

Blind or (SL Series only) visible through bolt assembly flange option

19.0 - 22.0 + 24.0 inch diameters (excluding 23.0”)



Available for all applications / PCD’s / Offsets / CB’s, etc. Available for all applications / PCD’s / Offsets / CB’s, etc.


FINISH NAME: Brushed Gunmetal w/ Brushed Spoke SurfacesPART #: F2FINISH NAME: Brushed Gunmetal w/ Brushed Spoke SurfacesPART #: F2

FINISH NAME: TitaniumPART #: FTFINISH NAME: TitaniumPART #: FT

FINISH NAME: Brushed AluminumPART #: FBGFINISH NAME: Brushed AluminumPART #: FBG

FINISH NAME: Brushed Gunmetal PART #: FBRGFINISH NAME: Brushed Gunmetal PART #: FBRG

FINISH NAME: Matte Bronze Center / Gloss Bronze LipPART #: FMB / FGBFINISH NAME: Matte Bronze Center / Gloss Bronze LipPART #: FMB / FGB

FINISH NAME: Gloss ManbronzePART #: FGMBFINISH NAME: Gloss ManbronzePART #: FGMB

FINISH NAME: Polished Gunmetal PART #: FPGFINISH NAME: Polished Gunmetal PART #: FPG

FINISH NAME: Polished Aluminum w/ Stainless Spoke SurfacesPART #: FPS2FINISH NAME: Polished Aluminum w/ Stainless Spoke SurfacesPART #: FPS2

FINISH NAME: Brushed Gunmetal PART #: FBRGFINISH NAME: Brushed Gunmetal PART #: FBRG

FINISH NAME: Polished AluminumPART #: FPFINISH NAME: Polished AluminumPART #: FP

FINISH NAME: Brushed SmokePART #: FBRSFINISH NAME: Brushed SmokePART #: FBRS

FINISH NAME: Brushed Aluminum + PPG Color Matched Clear PART #: FBPPGFINISH NAME: Brushed Aluminum + PPG Color Matched Clear PART #: FBPPG

FINISH NAME: Smoked TitaniumPART #: FSTFINISH NAME: Smoked TitaniumPART #: FST

FINISH NAME: Polished Gunmetal PART #: FPGFINISH NAME: Polished Gunmetal PART #: FPG

FINISH NAME: Fine TexturedMatte BronzePART #: FTBFINISH NAME: Fine TexturedMatte BronzePART #: FTB

FINISH OVERVIEWALL 15 ADV.1 2014 WHEEL STYLES ARE AVAILABLE IN ALL FINISH OPTIONS BELOWFINISH OVERVIEWALL 15 ADV.1 2014 WHEEL STYLES ARE AVAILABLE IN ALL FINISH OPTIONS BELOW

FINISH NAME: Brushed Aluminum / Gloss Red ClearPART #: FBGRFINISH NAME: Brushed Aluminum / Gloss Red ClearPART #: FBGR

FINISH NAME: Polished / Stainless Spoke SurfacesPART #: FPS2FINISH NAME: Polished / Stainless Spoke SurfacesPART #: FPS2

FINISH NAME: Brushed / Matte ClearPART #: FBMFINISH NAME: Brushed / Matte ClearPART #: FBM

FINISH NAME: PPG Color Match (lip)PART #: FPPGFINISH NAME: PPG Color Match (lip)PART #: FPPG

FINISH NAME: Gloss Gunmetal (center)PART #: FGGFINISH NAME: Gloss Gunmetal (center)PART #: FGG

FINISH NAME: Brushed Aluminum / PPGPART #: FBPPGFINISH NAME: Brushed Aluminum / PPGPART #: FBPPG

FINISH NAME: Stainless Aluminum / Gloss ClearPART #: FSGFINISH NAME: Stainless Aluminum / Gloss ClearPART #: FSG

FINISH NAME: TitaniumPART #: FTFINISH NAME: TitaniumPART #: FT

FINISH NAME: Gloss Black (Lip / Inner)PART #: FGBFINISH NAME: Gloss Black (Lip / Inner)PART #: FGB

FINISH NAME: Gloss SilverPART #: FGSFINISH NAME: Gloss SilverPART #: FGS

FINISH NAME: Gloss BlackPART #: FGBFINISH NAME: Gloss BlackPART #: FGB

FINISH NAME: Brushed SmokePART #: FBRSFINISH NAME: Brushed SmokePART #: FBRS

FINISH NAME: Matte BlackPART #: FMBFINISH NAME: Matte BlackPART #: FMB

FINISH NAME: ManBronzePART #: FMBRFINISH NAME: ManBronzePART #: FMBR

FINISH NAME: DeathbronzePART #: FDBFINISH NAME: DeathbronzePART #: FDB

FINISH OVERVIEWALL 15 ADV.1 2014 WHEEL STYLES ARE AVAILABLE IN ALL FINISH OPTIONS BELOWFINISH OVERVIEWALL 15 ADV.1 2014 WHEEL STYLES ARE AVAILABLE IN ALL FINISH OPTIONS BELOW

ENGINEERED WHEEL OPTIONSBACKPAD POCKETING / WEIGHT REDUCTION UPGRADESENGINEERED WHEEL OPTIONSBACKPAD POCKETING / WEIGHT REDUCTION UPGRADES05|05|

Titanium Lug Bolts & Lug NutsLightTitanium Lug Bolts & Lug NutsLightLight weight and extremely high strength lug bolt options for nearly any application in most popular sizes. ADV.1 titanium lug bolt sets are available in multiple configurations such as bolts, nuts, 2 piece and closed end nuts for use on both street and race applications. Each order is made specific to the exact engineering specifications of the ADV.1 wheels in combination with the vehicle application, i.e., the bolts are engineered specifically based off of the wheels dimen-sions which vary from vehicle to vehicle. ADV.1 titanium lug bolts are also available for oem wheels and even in universal sizes for aftermarket wheels aside from our own.

Light weight and extremely high strength lug bolt options for nearly any application in most popular sizes. ADV.1 titanium lug bolt sets are available in multiple configurations such as bolts, nuts, 2 piece and closed end nuts for use on both street and race applications. Each order is made specific to the exact engineering specifications of the ADV.1 wheels in combination with the vehicle application, i.e., the bolts are engineered specifically based off of the wheels dimen-sions which vary from vehicle to vehicle. ADV.1 titanium lug bolts are also available for oem wheels and even in universal sizes for aftermarket wheels aside from our own.

Standard ADV.1 Exposed Through BoltsFront mount through bolt w/ rear mount open nut Finished in chrome, gloss black, or gunmetal

Standard ADV.1 Blind BoltsRear mount standard “blind” hardware. Zinc coated high strength & extremely durable

Titanium & Anodized Titanium Hardware

Standard ADV.1 Exposed Through BoltsFront mount through bolt w/ rear mount open nut Finished in chrome, gloss black, or gunmetal

Standard ADV.1 Blind BoltsRear mount standard “blind” hardware. Zinc coated high strength & extremely durable

Titanium & Anodized Titanium HardwareTitanium & Anodized Titanium HardwareSpecificallyTitanium & Anodized Titanium HardwareSpecificallySpecifically engineered fasteners for all ADV.1 multi piece applications. These fasteners are tested and approved for both street and race applications. Testing data has proven a 27% reduction in weight and a 41% increase in strength when compared to our standard stainless steel fasteners which are al-ready light weight and extremely strong. Overall on a

Specifically engineered fasteners for all ADV.1 multi piece applications. These fasteners are tested and approved for both street and race applications. Testing data has proven a 27% reduction in weight and a 41% increase in strength when compared to our standard stainless steel fasteners which are al-ready light weight and extremely strong. Overall on aa standard 40 bolt 3 piece wheel the titanium fas-tener option results in a 1.3 pound weight savings over our standard stainless bolts and a 1.6 pound weight savings over our competitors typical zinc fas-teners used by most manufacturers.

a standard 40 bolt 3 piece wheel the titanium fas-tener option results in a 1.3 pound weight savings over our standard stainless bolts and a 1.6 pound weight savings over our competitors typical zinc fas-teners used by most manufacturers.

MATERIAL:•Grade 5 titanium •Aerospace certified material •Rolled threading

MANUFACTURING:•Swiss style screw machinery•Extremely tight tolerances

MATERIAL:•Grade 5 titanium •Aerospace certified material •Rolled threading

MANUFACTURING:•Swiss style screw machinery•Extremely tight tolerances •Extremely tight tolerances •Made in the USA•Extremely tight tolerances •Made in the USA

WEIGHT Each wheel x40

Exp. Fastener •Steel: 5.52 lbs.•Titanium: 2.8 lbs.•Savings: 2.72 lbs.

Blind Fastener

WEIGHT Each wheel x40

Exp. Fastener •Steel: 5.52 lbs.•Titanium: 2.8 lbs.•Savings: 2.72 lbs.

Blind Fastener Blind Fastener •Steel: 4.4 lbs.•Titanium: 2.56 lbs. •Savings: 1.84 lbs.

Blind Fastener •Steel: 4.4 lbs.•Titanium: 2.56 lbs. •Savings: 1.84 lbs.

ASSEMBLY HARDWARETITANIUM & STAINLESS STEELTHROUGH BOLTS & BLIND

ASSEMBLY HARDWARETITANIUM & STAINLESS STEELTHROUGH BOLTS & BLIND02|02|TITANIUM LUG BOLTS & NUTS

OEM SIZING / CUSTOM / AFTERMARKETTITANIUM LUG BOLTS & NUTSOEM SIZING / CUSTOM / AFTERMARKET01|01|

TITANIUM SL / CS SERIES AUTHENTICITY BADGEFOR USE EXPOSED HARDWARE OR BLIND BOLT ASS-FLANGETITANIUM SL / CS SERIES AUTHENTICITY BADGEFOR USE EXPOSED HARDWARE OR BLIND BOLT ASS-FLANGE

SL Series tianium badging

Blind assembly hardware versionTitanium SL Series badge insert located on the corresponding blind bolt optioned as-sembly flange recess area.

Exposed hardware version

SL Series tianium badging

Blind assembly hardware versionTitanium SL Series badge insert located on the corresponding blind bolt optioned as-sembly flange recess area.

Exposed hardware versionTitanium SL Series badge insert located on aluminum SL Series bracket w/ corre-sponding recessed area designed to house the titanium SL badge.

Titanium SL Series badge insert located on aluminum SL Series bracket w/ corre-sponding recessed area designed to house the titanium SL badge.

Weight Reduction / Backpad pocketing

Backpad pocketing processBackpad

Weight Reduction / Backpad pocketing

Backpad pocketing processBackpadBackpad pocketing is standard on our CS Series wheels, and offered as an upgrade option on our Track Spec SL Series wheels, M.V2 SL Series wheels and our M.V1 SL Series wheels. The process allows us to eliminate excess material around the hub / backpad surface area which reduces weight. In most cases, weight reduction can range from .75 lbs. to 1.2 lbs. per wheel.

Lathe Grooved backpad process

Backpad pocketing is standard on our CS Series wheels, and offered as an upgrade option on our Track Spec SL Series wheels, M.V2 SL Series wheels and our M.V1 SL Series wheels. The process allows us to eliminate excess material around the hub / backpad surface area which reduces weight. In most cases, weight reduction can range from .75 lbs. to 1.2 lbs. per wheel.

Lathe Grooved backpad processLathe Grooved backpad processOfferedLathe Grooved backpad processOfferedOffered as a standard option on our Track Spec SL Series wheels, M.V2 SL Series wheels and our M.V1 SL Series wheels. The Lathe Grooved backpad option allows us to reduce weight from the backpad by eliminating excess mate-rial, similar to the pocketing process only not as vehicle spe-cific nor as effective. The lathe groove process on average will reduce weight from 0.5 lbs. to .75 lbs. per wheel.

Offered as a standard option on our Track Spec SL Series wheels, M.V2 SL Series wheels and our M.V1 SL Series wheels. The Lathe Grooved backpad option allows us to reduce weight from the backpad by eliminating excess mate-rial, similar to the pocketing process only not as vehicle spe-cific nor as effective. The lathe groove process on average will reduce weight from 0.5 lbs. to .75 lbs. per wheel.

04|04|

ADV.1 billet aluminum center capFinished to match the surface area of the corresponding wheel

ADV.1 billet aluminum center cap w/ custom finish optionFinished to match the surface area of the corresponding wheel, i.e. matte black cap + engraved ADV.1 logo finished with any requested finish option.

OEM center cap use

ADV.1 billet aluminum center capFinished to match the surface area of the corresponding wheel

ADV.1 billet aluminum center cap w/ custom finish optionFinished to match the surface area of the corresponding wheel, i.e. matte black cap + engraved ADV.1 logo finished with any requested finish option.

OEM center cap useOEM center cap useWheel is engineered for use with the oem center cap / ADV.1 caps are not provided or applicable to these orders.

Custom center cap design / machiningWheel is engineered for use with a custom design ADV.1 standard size billet aluminum cap. Any design can be ordered and applied to he cap in place of or in addition to the ADV.1 logo.

OEM center cap useWheel is engineered for use with the oem center cap / ADV.1 caps are not provided or applicable to these orders.

Custom center cap design / machiningWheel is engineered for use with a custom design ADV.1 standard size billet aluminum cap. Any design can be ordered and applied to he cap in place of or in addition to the ADV.1 logo.

CENTER CAP OPTIONSBILLET ALUMINUM ADV.1 CAP / OEM CAP APPLICABILITY / CUSTOM DESIGN OPTIONCENTER CAP OPTIONSBILLET ALUMINUM ADV.1 CAP / OEM CAP APPLICABILITY / CUSTOM DESIGN OPTION03|03|

STANDARD & NON STANDARD OPTIONSALL OPTIONS LISTED BELOW ARE APPLICABLE TO ALL ADV.1 WHEEL STYLES IN MOST CONFIGURATIONSSTANDARD & NON STANDARD OPTIONSALL OPTIONS LISTED BELOW ARE APPLICABLE TO ALL ADV.1 WHEEL STYLES IN MOST CONFIGURATIONS

PRIVATE DESIGN PROGRAMADV.1’s new “Private Design” program

The


The


TheThe ADV.1 Wheels Private Design Program is our version of what some would call a "Private Label" program. The difference is, this isn't a package or service that we offer openly, to anyone who's interested. This is a case by case program that has no limita-tions or guidelines, set pricing, or packages to choose from. It's a completely individu-alized design / manufacturing program offered / available only to those who we feel would be a good fit for our company and for this type of partnership with us. We're ca-pable of providing every aspect of this process from design, testing, development, TUV

The ADV.1 Wheels Private Design Program is our version of what some would call a "Private Label" program. The difference is, this isn't a package or service that we offer openly, to anyone who's interested. This is a case by case program that has no limita-tions or guidelines, set pricing, or packages to choose from. It's a completely individu-alized design / manufacturing program offered / available only to those who we feel would be a good fit for our company and for this type of partnership with us. We're ca-pable of providing every aspect of this process from design, testing, development, TUV

The ADV.1 Wheels Private Design Program is our version of what some would call a "Private Label" program. The difference is, this isn't a package or service that we offer openly, to anyone who's interested. This is a case by case program that has no limita-tions or guidelines, set pricing, or packages to choose from. It's a completely individu-alized design / manufacturing program offered / available only to those who we feel would be a good fit for our company and for this type of partnership with us. We're ca-pable of providing every aspect of this process from design, testing, development, TUV certification, as well as all production & manufacturing aspects.

We offer this program primarily to: •OEM Vehicle Dealerships•Aftermarket Performance Specialists •Private Individuals seeking their own exclusive 1 off wheel design •More...

certification, as well as all production & manufacturing aspects.


certification, as well as all production & manufacturing aspects.


PROGRAM OPTIONS:4 primary program options offered to select clientele

Due


Due


DueDue to the heavily involved engineering, development and time consuming nature of this type of project, we are unable to offer the service openly to all clients unfortunately. Our engineering man power is limited so we are very careful about which projects we accept as to not over commit ourselves to any non standard production based program. At the same time how-ever, depending on the overall program goals, engineering involvement and other factors, based on a case by case basis we are able to accept most program inquires based on the following categories listed below:

PRIVATE DESIGN PROGRAM CATEGORIES:

Program A:

Due to the heavily involved engineering, development and time consuming nature of this type of project, we are unable to offer the service openly to all clients unfortunately. Our engineering man power is limited so we are very careful about which projects we accept as to not over commit ourselves to any non standard production based program. At the same time how-ever, depending on the overall program goals, engineering involvement and other factors, based on a case by case basis we are able to accept most program inquires based on the following categories listed below:


Program A:

Due to the heavily involved engineering, development and time consuming nature of this type of project, we are unable to offer the service openly to all clients unfortunately. Our engineering man power is limited so we are very careful about which projects we accept as to not over commit ourselves to any non standard production based program. At the same time how-ever, depending on the overall program goals, engineering involvement and other factors, based on a case by case basis we are able to accept most program inquires based on the following categories listed below:


Program A: Individual 1 off wheel design based on a modified version of an existing ADV.1 Wheel design.

Program B: Individual 1 off wheel design based on non existing ADV.1 Wheel Design.

Program C: Standardized wheel program consisting of x3 or more existing ADV.1 Wheel Designs.

Program D: Standardized wheel program consisting of x3 or more NON existing / New ADV.1 Designed styles.

Individual 1 off wheel design based on a modified version of an existing ADV.1 Wheel design.




Individual 1 off wheel design based on a modified version of an existing ADV.1 Wheel design.




PRIVATE DESIGN PROGRAMPRIVATE DESIGN PROGRAMPRIVATE DESIGN PROGRAM

Discount on aluminum alloy rims here

http://www.carid.com/custom-wheels.html

Documents

TS SL 7 | TS SL 10 | TS SL 6 | TS SL 6.0 | TS SL - CARiD.com · 2019. 1. 22. · adv5 | ts sl adv005 | ts sl adv7.0 | ts sl adv15 | ts sl adv7 | ts sl adv5.0 | ts sl adv6.2 | ts sl