Trade Catalogue 2007 - SUPER-EGO Ego catalogue.pdf · Trade Catalogue 2007. SUPER EGO TOOLS is a member of the ROTHENBERGER TOOL GROUP ... Roll Groover and Base Plates 3. 4 TEL: TOLL

Trade Catalogue 2007

SUPER EGO TOOLS is a member of the ROTHENBERGER TOOL GROUPSUPER EGO BRAND products are manufactured in three modern production centres located in the Province of Vizcaya in Northern Spain and distributed by ROTHENBERGER group companies and associated non-group trading partners around the world.

Product ProgrammeOver 50 years experience and an ongoing investment in advanced design, research and development has resulted in one of the most comprehensive programmes of tools and equipment for the professional installation and maintenance of copper, steel and plastic tube and pipe.

QualityISO 9001 Certification guarantees the quality of SUPER EGO brand products and our dedication to all aspects of quality control, from raw materials to finished products. A major investment in CNC automated production has lead to tools which provide exceptional performance and an extended working life.

Environmental ProductionISO 14001 Certification reflects the commitment of SUPER EGO to protect and respect the environment within all of our industrial operations for the benefit of our customers and future generations.

ServiceWe aim to provide not only top quality products but also the highest standards in sales and after sales service. Our Australian team of State and Area Sales Managers are dedicated to assist and support both SUPER EGO brand stockists and distributors and their trade and industrial customers with technical advice and an ongoing schedule of demonstration activities nationwide.

Distribution – Australia and New ZealandIn line with the ROTHENBERGER commitment to provide first class customer support and the very best advice prior to product selection and purchase, ROTHENBERGER/SUPER EGO personnel carry out thousands of informative demonstrations and Trade Counter Promotions around the country and across the globe. In addition ROTHENBERGER group of companies are involved in all major trade fairs and exhibitions to communicate new product developments designed to meet the challenge of changing methods and new pipe and tube materials.

Warranty ClaimAll SUPER EGO products are covered by the same 12 month guarantee.

At SUPER EGO, we manufacture top quality tools to the strictest quality control systems from raw material to the finished product conforming to ISO 9001.

We are naturally very keen to repair any of our products that have been found to be defective in material or workmanship. However, we cannot, and won’t, cover our products suffering normal wear and tear, accidental damage, misuse, abuse or those that are simply worn out after providing a long and reliable service.

We reserve the right to repair any product, or replace defective parts only, rather than replace the complete article.

SUPER EGO stockists and distributors are not authorised to replace products, without prior approval.

Product Return GuideTo arrange the return for inspection under warranty and/or service of any article please contact ROTHENBERGER/SUPER EGO Customer Services on

(02) 9899-7577 or TOLL FREE 1800 186 657

All warranty inspection goods are logged within the ROTHENBERGER/SUPER EGO computer system and issued with an individual IGA Number, which should be marked on the packaging when the item is returned. This will ensure rapid action.

SUPER-EGO DIVISION ROTHENBERGER AUSTRALIA PTY LTD

A.B.N. 12 008 411 658 Unit 12/5 Hudson Avenue, Castle Hill NSW 2154

Telephone: (02) 9899 7577 Facsimile: (02) 9899 7677 Email: [email protected]

Page

Pipe Wrenches, Strap Wrenches . . . . . . . . . . . . . . . 4Chain Wrenches, Adj Wrenches

Basin Wrenches, Mixer Tap Tool Set .. . . . . . . . . . . 5 Multigrips, Pliers, Concrete Nippers, Steel Pipe Cutters,

Plastic Pipe Shears, Plastic Pipe Cutters, . . . . . . . 6Multilayer Tube Cutter

Copper Tube Cutters, Wheels & Axles . . . . . . . . . . 7

Tube Expander Sets, Expander Tools, Heads . . . 8 Tube Extractor Sets & Heads, Flaring tools

Hand Benders, Electric Benders, . . . . . . . . . . . . . . . 9

Hydraulic Bender, Brazing Torches, Gas . . . . . . . . 10 Torch Spares & Accessories, Silver Solder

Screwdriver Sets, Hacksaw & Blades,. . . . . . . . . . . 13 Diamond Blades, High Speed Twist Drills, Screw Punch, Tin Snips

Tube Deburrers, Pipe Freezing Spray, . . . . . . . . . 14 Pipe Freezing Kit, Work Boots

Pressure Test Pumps & Submersible Pumps. . . . 16

CCTV Drain Inspection Cameras, . . . . . . . . . . . . . . 17 Camera Accessories

Electric Drain Cleaning Machines. . . . . . . . . . . . . . 20 Drain Cleaning Spirals & Accessories and Tools

Polypropylene Drain Rods, . . . . . . . . . . . . . . . . . . . 22 Ropump Super, Steel Drain Test Plugs, Power Cleaner

Pipe Vices, Portable Work Stand . . . . . . . . . . . . . . . 23 Pipe Stand, Hand Ratchet Threaders

Portable Power Threaders, Tiger Saw . . . . . . . . . . 24 Roll Groover and Base Plates

3

54 TEL: TOLL FREE 1800 186 657 FAX: TOLL FREE 1800 286 657TEL: TOLL FREE 1800 186 657 FAX: TOLL FREE 1800 286 657

Prod Product Part No. Size Grp

PIPE WRENCHES

Heavy Duty Pipe Wrench 1020800 8" A High strength “one piece” construction 1021000 10" A with large capacity jaws and induction 1021200 12" A hardened teeth. 1021400 14" A (Replacement hook and heel jaws 1021800 18" A available.) 1022400 24" A 1023600 36" A 1024800 48" A

Aluminium Pipe Wrench 1041000 10" A Features similar to Heavy Duty Pipe 1041400 14" A Wrench but 40% lighter due to 1041800 18" A aluminium alloy handle construction. 1042400 24" A 1043600 36" A 1044800 48" A

Stillson Pipe Wrench 1010800 8" A Classic design in forged and tempered 1011000 10" A steel. Unbreakable housing and shaft 1011200 12" A and induction hardened teeth. 1011400 14" A 1011800 18" A 1012400 24" A 1013600 36" A

Offset Aluminium Pipe Wrench 1051400 14" A Exceptionally strong yet ultra light. Ideal 1051800 18" A for use in confined spaces. Strap Wrench 1080200 1"– 8" A High strength aluminium alloy construction with nylon strap for positive grip without marking surfacesReplacement Strap 70269 A

Easy Grip Strap WrenchFast operated clamping mechanism allowingquick adaptation to the required pipediameter. Special nylon reinforced strap allowinggood grip and extra strength. Will not damage or deform pipe, even plastic pipe. 1230100 3/4” - 6” AReplacement Strap 55076 A

Reversible Chain Wrench 1071200 4" A High strength positive grip for tightening and loosening without removal of chain.

Heavy Duty Tongue Chain Wrench 1033100 21/2" A Designed for the most demanding jobs 1033200 4" A with double sided head and 1033300 6" A quick-release action.

Adjustable Wrench in Chrome Vanadium 70440N 4” A Steel with Chrome Plated Finish. Positive 70441N 6" A location and precision manufactured for 70442N 8" A ease of use and long working life. 70443N 10" A 70444N 12" A 70445N 15" A

NEW!



BASIN WRENCHES

Standard Basin Wrench with 1180100 3/8"–11/4" A swivelling jaw for 3/8" to 11/4" tap nuts.

Telescopic Spring Loaded Wrench with same 1170100 3/8"–11/4" A features as standard type plus 4 length adjustments.

MIXER TAP SET

Universal set for fixing mixer taps to sinks 80000S 9, 11, 12, 13mm A

PLIERS

Machined Groove Plier with interlocking 5090900 91/2" A anti-slip action and induction hardened 5091200 12" A teeth. 5091600 16" A

Sanigrip Waste Plier with 4 position jaw 5301000 10" A adjustment up to 21/2" capacity. Ideal for waste traps and waste back nuts. Includes soft grip removable plastic jaws.

Pair of replacement plastic jaws 5301080 A

Self-Adjusting Plier with spring action 5251000 10" A for rapid gripping of all pipes and nuts. Automatically sizes to the object and removes the need for manual setting

“Super-Fast-Lock” Locking Plier 5270100 10” ANew push button locking multigrip thatlocks in place at the push of a button.12 size adjustments & slim jaw for access intight spaces.

Multigrip Plier. Drop forged from 5200700 7" A chrome vanadium steel. Red finish. 5241000 10" A 5241200 12" A

SPK Multigrip Pliers with self-locking 5220700 7" A anti-slip action on pipe and nuts. 5221000 10" A Black finish plus comfort grip. 5221200 12" A

SHEET METAL BENDING PLIERS

Forged burnished steel, box joint, with PVC coated grips. Bending Pliers, straight 351055S B

Bending Pliers, curved 45˚ 351056S B

Bending Pliers, curved 90˚ 351057S B

CONCRETER’S NIPPERS

Standard Action Nippers with long 5070900 9" A handles for easy use. 5071000 10" A

STEEL PIPE CUTTERS

Precision drop forged steel construction for easy burr-free cutting

Super 11/4" 7010100 1/8"–11/4" A

Super 2" 7010200 1/8"–2" A

Enorm 4" 7100400 11/4"–4" BSpare Cutter Wheels – each 70046 11/4" A

each 70051 2" A each 70061 4" A

NEW!



RATCHET PIPE SHEARS

Ratchet action cutters provide a fast, clean square cut in most types of plastic pipe including MDPE, PE, PP, HEPZO and P-Ex Rocut 32 55090N 0–32mm A Rocut 42 55091N 0–42mm A Rocut 63 55095N 0–63mm B Replacement Blade for Rocut 32 50032 A Replacement Blade for Rocut 42 50042 A Replacement Blade for Rocut 63 50063 B

PROFESSIONAL PIPE SHEARSRugged precision shears for effortlesscutting of plastic pipes. Designed for waste pipe, PP, PE, PEX, PB & PVDF

Rocut 26TC 5680600 0–26mm A

Rocut 32TC 5684000 0-32mm A Replacement blade for Rocut 32TC 5684003 A

Rocut 42TC 5680200 0–42mm A Replacement blade for Rocut 42TC 5680224 A

Rocut 50TC 5680500 0-50mm AReplacement blade for Rocut 50TC 5680524 A

Rocut 75TC 5687500 0-75mm A Replacement Blade for Rocut 75TC 5687524 A

PLASTIC PIPE CUTTERS Fast precision cutting of all thick wall plastic tubing with spring-loaded action for fast adjustment from size to size (will also cut copper tube with alternative wheel)

Automatic Pipe Cutter PL1 7500100 6–67mm A Automatic Pipe Cutter PL2 7510100 50–125mm A Automatic Pipe Cutter PL3 7520300 110–168mm A

Cutter Wheel for PL1 – each 70028 67mm A Cutter Wheel for PL2 – each 55054 125mm A Cutter Wheel for PL3 – each 55074 168mm A PLASTIC PIPE CUTTING & CHAMFERING TOOLS

Self-contained cutting and chamfering tools for a fast guaranteed 90° square cut and perfect 15° chamfer

Rocut 110 Tool only 55020N 110mm B Reamer for Rocut 110 (optional) 55018 B Spare Carbide Cutter Blade 55029 B

MULTI-LAYER TUBE CUTTERDesigned to cut multi layered PE, PP, PVDF, and PVC hard plastic tubesTC 35 MSR 7350100 6-35mm ASpare Cutting Wheel 70188 A



COPPER TUBE CUTTERS

Single action automatic tube cutting in tight locations

Pipeslice No.1/2" 88807S 1/2" O.D. AUS A Pipeslice No.3/4" 88808S 3/4" O.D. AUS APipeslice 1” (NEW!) 88820S 1” O.D. AUS APipeslice 1/2" NZ 88801S 1/2" O.D. NZ A Pipeslice 3/4" NZ 88804S 3/4" O.D. NZ A Pipeslice 1” NZ (NEW!) 88813S 1” O.D. NZ APipeslice Cutter Wheel AUS 88806 each A Pipeslice Cutter Wheel NZ 88803 each A

Fully adjustable precision tube cutting in limited space Minicut No. 1 7160000 1/4"–5/8" O.D. A Minicut No. 2 7220000 1/4"–7/8" O.D. A

Heavy duty compact tube cutters with larger adjusting wheel Minicut 2000 Tube Cutter 7221000 1/4"–7/8" O.D. A Minimax Tube Cutter 7280000 1/4"–11/8" O.D. A

Traditional design with spare wheel and fold-out reamer No.30 Pro Tube Cutter 7250000 1/8"–11/8" O.D. A

Traditional design for larger size tube inc spare wheel No.50 Tube Cutter 7260000 1/2"–2" O.D. A

Heavy duty telescopic action precision tube cutting inc deburrer No.35 Tube Cutter 7350000 1/4"–13/8" O.D. A No.42 Pro Tube Cutter 74200ZB 1/4"–15/8" O.D. A

Spring-loaded action for instant change in tube sizes Automatic Pipe Cutter (size 1) 7500000 1/4"–25/8" O.D. A Automatic Pipe Cutter (size 2) 7510000 2"–5" O.D. A Automatic Pipe Cutter (size 3) 7520000 4"–65/8" O.D. A

Extremely smooth action. Precision cutting in restricted space Rotrac 28 70010P 1/4"–11/8" O.D. A Rotrac 42 70011P 1/4"–15/8" O.D. A

CUTTER WHEELS For Minicut No.1 & No.2 70003 each A Minicut 2000, Minimax, No.35, 70017 each A No.30 Pro, 42 Pro, No.50 & Auto 1 For Automatic 2 & 3 70057 each A For Rotrac 28 & 42 70007 each A

Wheel Axles and Pins Pin for Rotrac 28 & 42 70080 each A Circlip for Rotrac 28 & 42 70081 each A Axle for No. 50 & minicutters 70006 each A Axle for Automatic (size 2 & 3) 50049 each E Axle for all other tube cutters (incl No 35) 70041 each ADeburrer blade for the following tube cutters;No.35, No.42 & all Automatic Pipe Cutters 21652 A




TUBE EXPANDER SETS

Precision capillary socket forming tools for the production of end feed soldered joints in copper tube without fittings. All sets are complete with steel case and a deburring tool

Rocam Expander Set – Plumbing 11135XS Set B 1/2", 3/4", 1" O.D. Rocam Expander Set – (New Zealand) 11227XS Set B 15-22-28mm. TUBE EXPANDER TOOLS Rocam Expander Tool only 5/16"–13/4" capacity 012000S B (Supersedes PN: 11000XS & 11000N) TUBE EXPANDER HEADSLong life riveted heads produce an 11052N 3/8" O.D. B even expansion for precision capillary 11053S 1/2" O.D. B joints in copper tube 11054S 5/8" O.D. B 11055S 3/4" O.D. B 11057S 1" O.D. B 11059S 11/4" O.D. B 11038S 11/2" O.D. B 11015N 15mm (NZ) B 11022N 22mm (NZ) B 11028N 28mm (NZ) B

TUBE EXTRACTOR SETSPrecision capillary tee forming tool for the production of end feed solder joints in copper tube in almost any position without fittings. All sets are complete with steel case, Unidrill, cam pincers & ratchet handle (11mm square drive)

Tube Extractor Set – Plumbing 22135S Set B 1/2", 3/4", 1" O.D.Unidrill Automatic 21575 3/8" - 15/8" B Ratchet Handle (11mm drive) 22081 BTUBE EXTRACTOR HEADSLong life extractor heads for precision 22061S 1/2" O.D. B capillary joints in copper tube 22062S 3/4" O.D. B 22064S 1" O.D. B 22066S 11/4" O.D. B 22038S 11/2" O.D. B STANDARD FLARING TOOLFor 45° single flares on copper, brass, 4910000 3/16"- 5/8" A aluminium and malleable steel tube. Self-centering clamp. Tubing will not slip. 4930000 3/16"-3/4" O.D. A Hardened flare cone.

DOUBLE FLARING TOOL SETDouble Flaring Tool Set 4910300 3/16" - 5/8" O.D. A For hydraulic/pneumatic and automotive applications

UNIVERSAL FLARING TOOLUnique self-adjusting flaring tool for 222601SE 3/16" - 5/8" A flaring any tube size from 3/16" to 5/8" O.D. Compact and easy to use, with innovative tube holding mechanism.

PRO FLARING TOOLHeavy duty handle and spindle with R222402SE 1/8" - 3/4" O.D. A eccentric flaring cone and roller bearings for smooth and easy flaring of heavy gauge and high pressure gas lines.(R410A Compliant)




*

* Full Copper Bending Set Pictured

MINIBENDERCompact precision bender for micro bore bending to 180°

Minibender for 1/4", 5/16", 3/8" O.D. 7610200 1/4", 5/16", 3/8" A UNIVERSAL TUBE BENDERS

Individual precision benders for micro bore 7600100 1/4" O.D. A bending to 180° 7600800 5/16" O.D. A 7600200 3/8" O.D. A 7600400 1/2" O.D. A 7601600 5/8" O.D. A

PRO-BEND TUBE BENDERS

Tube bender, easier and 25913S 1/2" (AUS) A more accurate to use. Offset handles and 25914S 3/4" (AUS) A grips for ultimate comfort. Angle markings 25911S 1/2" (NZ) A for reference to 180°. Will bend hard drawn 25912S 3/4" (NZ) A copper.

MULTIBENDER

For copper and light grade stainless steel tube. Easy to use, lightweight, portable and robust. Each bender is complete with appropriate guides.

Plumbing and Heating Sizes AUS 80165SE 1/2", 3/4" (AUS) A Plumbing and Heating Sizes NZ 80164SE 1/2", 3/4" (NZ) A

Replacement Guides 80168SE 1/2" Plumbing (AUS) A 80166SE 3/4" Plumbing (AUS) A 80175SE 1/2" Plumbing (NZ) A 80292SE 3/4" Plumbing (NZ) A 81015 1/2" Refrigeration A 90617 5/8" Refrigeration A 90618 3/4" Refrigeration A 90619 7/8" Refrigeration A

MAXI BENDER MSROne handed bender for precision bendingup to 900 of aluminium multilayer tubes

Maxibender MSR Set 32mm 23095SE Set B14, 16, 18, 20, 26, 32mm

ROBEND 3000 ELECTRIC TUBE BENDERFor site use or prefabrication of preset angle bends in copper, steel, stainless steel and plastic coated steel pipes. Easy angle setting mechanism whichproduces repeat bends from 0–180° quickly and precisely

Robend 3000 “Basic” Set + Tripod 7642200 B without Formers

Set for bending 1/2", 3/4", 1" Copper, 7642051 Set B Stainless Steel, and 1/4", 1/2", 3/4" Steel Pipes, c/w Bending Spray in Carrying Case(does not come with tripod)

Robend 3000 Construction Set for 7642239 B rapid radius bending of steel reinforcing bars up to 180° for ferro concrete installations. Set 10,12,16mm comes with Tripod Collapsible Tripod Stand for Robend 3000 25748 B

Additional Former & Guide Sets 25652 1/2" O.D B 25616 5/8" O.D. B 25619 3/4" O.D. B 25622 7/8" O.D. B 25625 1" O.D." B 25626 11/8" O.D. BReplacement Guide Block Pin 7620375 B

NEW!


MAINTENANCE ADVICE FOR BOTH TORCHES ILLUSTRATED ON THIS PAGE

For a longer working life of your SUPER EGO torch, please note the following advice:- NEVER store your torch on the gas bottle for long periods.- Always keep your torch upright when connected to a Mapp Gas Cylinder.- Your torch requires regular cleaning and maintenance, especially the burn

tube, burn tip and jet (you should do this approximately every 4-6 weeks, depending on usage).

SERVICING FOR THE SUPER TORCH For a small fee, we will service your SUPER EGO torch, with genuine SUPER EGO parts, and return it as good as new. (All repairs will be quoted first)*Please note – freight to and from is to be paid by the customer.


ROBULL HYDRAULIC BENDER

Heavy-duty, compact hydraulic bender with 15-tonne pressure ram and automatic piston return. All bender sets are fully equipped and complete with heavy-duty steel carrying case. (Tripod stand optional)

Robull 3/8"–2" Set (Manual) 7742510 3/8",1/2",3/4",1", B 11/4",11/2",2"

Robull Electric 3/8"–2" Set 7742612 240 Volts B

Tripod Stand 58182 A

Replacement Formers 57985 3/8" B 57986 1/2" B 57987 3/4" B 57988 1" B 57989 11/4" B 57990 11/2" B 57991 2" B

Hydraulic Oil 58185 1 Litre B

SUPER TORCH BRAZING TORCH

Concentrated high heat, anti-flare, adjustable flame with powerful turbine flame pattern. Equipped with instant piezo ignition, the Super Torch is fast and effective for all soldering and brazing applications and can be operated with either the disposable propane or Mapp gas cylinders

Super Torch (without gas) 35644C B

SUPER TORCH PLUS BRAZING TORCH

The next generation in portable brazing torch, the Super Torch Plus is the most complete torch available. Equal or betterperformance than the Super Torch, with a wider range of options. Features include piezo ignition, ability to work soaked in water, 'Twist 'n' Load' rapid exchange of burners, metal construction and precision flame adjustment. Complete with cylinder collar, Cyclone and Fine-Flame Burners and cylinder safety stand. Approx Temperatures using Propane 1900oC, Mapp 2400+oC, 35430S B

MAPP GASDisposable Gas Cylinders Industrial grade gasses in tough impact resistant disposable steel cylinders (also suitable for other brand appliances with similar thread and valve connection)

Mapp gas cylinder 35663C 453gms B

Mapp gas cylinder safety stand 35461 B

Superfire 3 Gas cylinder Collar 35462 B

BURN TUBES FOR SUPER TORCH PLUSPin Point Burn Tube 35455S B

Standard Burn Tube 35456S B

Cyclone Burn Tube 14mm 35457S B

Shrink Burn Tube 35459S B

Hot Air burn Tube 35458S B


ProdProduct Part No. Size Grp

Super Torch PlusHotbox

Mapp Gas 35663C x 2Super Torch Plus

Brazing Torch 35430S

Pin Point Burn Tube 35455S

Gas Safety Stand 35461

Heat Guard 31043S

NEW!

HOTBOXThe Hotbox is great new kit for portable solderingand brazing. It contains a Supertorch Plus, Cyclone Burn Tube, Pin Point Burn Tube, Heat Guard, Mapp Gas Safety Stand and two bottles of Mapp Gas. It all comes together in a convenient carry case 35490SE B




ab

c

d

ab

cd

Flame control knob and jet

SUPER TORCH SPARES & ACCESSORIES

Adaptors to fit gas cylinder Primus 2000 35652 ST & ST+ B Propane hose adaptor (threaded) 35647 ST & ST+ B

Burners and Jets for Super Torch Pencil Flame Burner & Jet 35658 B Turbine Flame Burner (Super Torch) 35661 B

SPARE PARTS FOR SUPER TORCH Burn tube 35659 B

Piezo Ignition Unit 35660 B

Repair Kit 99998 BRepair kit contains Burn Tube, Piezo,Flame control knob and jet, springs,screws buttons & seals

Heat deflector guard 31042S Super Torch B (to prevent scorching walls and skirting 31043S Super Torch + B boards, etc.)

OTHER TORCH ACCESSORIES

High Pressure Propane Regulator POL 7/8" LH 2422030 0–6 bar B

2.5m Propane Hose with 3/8"LH 2512322 3/8"LH B Connections

Safety Spark Lighter 32077N B Pack of 6 Lighter Flints 32078 B

PLUMBERS SOLDERING MAT

Protection for all surfaces when soldering 67022S 12" x 12" A up to temperatures of 750°C. Completely asbestos-free. (Use with Heat Reflector Guard for best results at higher temperatures)

SILVER SOLDER RODS PRICES ON APPLICATION

GUARANTEED CONTENT SILVER SOLDER RODS

S2 SOLDER L-Ag2P 40212-SE2.5 2.5mm x 750mm (round) Yellow Tipped Special quality Silver Solder GUARANTEED to: 40212-SE3.0 3.0mm x 750mm (round) Yellow Tipped AS1167.1-B2 and DIN 8513 and AS/NZ3500

S5 SOLDER L-Ag5P 40005-SE2.5 2.5mm x 750mm (round) Silver Tipped Special quality Silver Solder GUARANTEED to: 40005-SE3.0 3.0mm x 750mm (round) Silver Tipped AS1167.1-B3 and DIN 8513 and AS/NZ3500

S15 SOLDER L-Ag15P 40015-SE2.5 2.5mm x 750mm (round) Brown Tipped Special quality Silver Solder GUARANTEED to: 40015-SE3.0 3.0mm x 750mm (round) Brown Tipped AS1167.1-B4 and DIN 8513 and AS/NZ3500




SCREWDRIVER SETS

6 pc Euroline Screwdriver Set comprising F202350 Set B 5.5 x 125mm Slotted

6.5 x 150mm Slotted 3.5 x 75mm Electricians 4.0 x 100mm Electricians No.1 Phillips x 100mm (PH1) No.2 Phillips x 125mm (PH2)

6 pc Euroline Screwdriver Set comprising F202360 Set B 5.5 x 125mm Slotted

6.5 x 150mm Slotted 3.5 x 75mm Electricians 4.0 x 100mm Electricians No.1 Pozidrive x 100mm (PZ1) No.2 Pozidrive x 125mm (PZ2)

HACKSAWS AND BLADES

Adjustable Hacksaw 1700000 9"–12" A

Bi-Metal Hacksaw Blade 1901200 12"x18Tpi A Bi-Metal Hacksaw Blade 1901201 12"x24Tpi A Bi-Metal Hacksaw Blade 1901202 12"x32Tpi A

DIAMOND BLADES

Ideal for angle grinders, hand-held circular FF14115SE 115mm Ø A saws and wall chasers. For cutting concrete, FF14230SE 230mm Ø A natural and synthetic stone

HIGH SPEED TWIST DRILLS

High quality with fully hardened and regrindable tips

19pc “Selector Box” – Metric 1–10mm (in 0.5mm steps) 205225 Set A

SCREW PUNCH

Screw punch for distortion free holes in sheet materials. Ideal for sinks

32mm Screw Punch 109320 A35mm Screw Punch (NEW!) 109350 A

TIN SNIPS

Drop forged, induction hardened metal cutters. Lever action gear, built in spring and pressed plastic grips.

Straight Cutting 610229SE A

Right Cutting 610230SE A

Left Cutting 610231SE A

NEW!

NEW!

NEW!



This freezing table is published as an approximate guide only and several varying factors such as the pipe material, pipe contents and the ambient temperatures can affect the time required to allow a suitable ice plug to form. The times and consumptions in this table are based upon pipes filled with stationary cold water at an ambient temperature of 20°C (68°F). Stainless steel, lead and plastic pipes will take longer to freeze than steel pipe or copper tubes – we strongly recommend that you add at least 25% to the freezing times indicated in this table. Freezing times also need to be increased at high ambient temperatures and pipe freezing may prove difficult in extreme hot weather or environments above 40°C.

UNIGRAT QUICK ACTION DEBURRER

For deburring edges, tubular and sheet materials. Small and handy, ideal for carrying about. Blade can be swivelled to match material contours.

Unigrat with HSS all-purpose blade 107052 A

GRATFIX HSS DEBURRER

For quick deburring of edges, tubular and sheet materials. Replaceable blade. Plastic handle

GRATFIX with No.1 blade 107050 A Spare No.1 HSS general purpose blade 21652 A

INTERNAL/EXTERNAL DEBURRER

For the rapid removal of both internal 11006N 1/8"–13/8" O.D. A and external burrs

QUICK-FREEZE PIPE FREEZING SPRAY

An environmentally friendly pipe freezing spray to create a temporary ice plug in any size tube from 1/4"–11/8" avoiding the need to drain down. Simple instructions on every can Quick-Freeze Pipe Freezing Spray 64001S 500g A Pipe Freezing Jacket 1/4"–11/8" 64002S Each A

FREEZE-PAK PIPE FREEZING KIT 64004S Set A

Consisting of a 500 gramme can of Quick-Freeze Spray, two pipe freezing jackets and four cable ties in an attractive four-colour display bag

FREEZING TIMES AND GAS CONSUMPTION TABLE

Copper TubeDiameter

Steel PipeDiameter

FreezingTime (Mins)

CoolantUsage

3/4”,1/2”,5/8” 1/4”, 3/8”, 1/2” 10 1 x 300 gr. can1/2 x 500gr. can

3/4”, 1” 3/4”, 1” 10 1 x 500 gr. can


• Steel Cap

• Oil resistant and acid resistant sole

• Anti-slip and anti-shock grip• Steel mid-soles

• Heat resistant sole (300o)

• Grey suede with navy nylon mesh

• Water resistant uppers

Comfort PlusWork Boot

COMFORT PLUS WORK BOOT SEGO500-7 7 B SEGO500-8 8 B SEGO500-9 9 B SEGO500-10 10 B SEGO500-11 11 B SEGO500-12 12 B

NEW!

ProdProduct PartNo. Size Grp



RP30 PRESSURE TESTING PUMP

30 bar pressure testing pump with 61130SE B lightweight 4.5L plastic tank. Single closing valve and one non-returning valve for simplified use. Only 4.5kg.

Replacement Hose 61125 BReplacement Gauge 61123 BO’ring set 61107 BReplacement Piston 61138 B

RP50 PRESSURE TESTING PUMP

Durable and reliable precision engineered 61004SE B unit for accurately testing all tube/pipe systems and pressure vessels etc., when used with water or oil. High volume piston reduces filling time and allows filling and testing in one fast operation. Incorporating double check valves with stainless steel ball seats for total reliability and prolonged life. The steel reinforced high pressure hose resists expansion giving accurate readings up to 60-bar pressure. All workings parts are rust proof and protected by an integral inlet filter. The tough steel tank is galvanised and epoxy coated for weather and scratch resistance and is covered by a 5 year rust-free guarantee.

Maximum pressure 60 bar/840 psi Tank capacity 12 litres Hose connection R1/2" BSPT

Replacement Hose (60 bar) 61306 B Replacement Gauge (60 bar) 61315 B

Set of replacement seals 61301 B Replacement Piston 61300 B

RP60 PRO II ELECTRIC PRESSURE TESTING PUMP

Compact and portable unit for rapid filling and accurate testing of pipe work and systems up to 40-bar (560-psi) in one continuous operation and multiple tests when used with optional additional “lock off” testing gauges

Pressure Testing Pump V120000 Set D SUBVORT 900A SUBMERSIBLE PUMPSubmersible, versatile and portable pump.Easy to use, ideal for water transfer andemptying operations, drainage and small irrigationThe pump is equipped with float switch allowingflood protection Can be used with clean or dirtywater

Subvort 900A SE28000 A

NEW!

9 50

6 150

3 200

1 225

m L/min


Performance features● Excellent manoeuvrability, thanks to movable camera head● One-man, single-handed device● Easy maintenance● Continuously adjustable brightness of LEDs● Integrated stowage compartment● Battery charge indicator● Duo-Power: Mains operation 240 V / 50–60 Hz or 18 V battery

Optional metering counter

ProdProduct PartNo. Size Grp

Rocam Mobile B & W Basic 69420W 13.0kgs B Rocam Mobile B & W with metering counter 69425W 13.4kgs BRocam Mobile B & W with metering counter & locator 69430W 14.5kgs B

3.8m

RoCam MobileBlack & WhiteROCAM® mobileDrain TV inspection camera with Duo-Power in b/wFor hollow spaces and drains of 50 to 150 mm dia.Camera head 33 mm dia.Push cable 4,5 mm dia.Push cable length 36 m

Reinforced push cable New, scratch-resistant sapphire lens New union nut with edge protection

● On-board battery charger withcharge status indicator:Cost-saving

● Simple disconnection ofbattery supply:Conserves the batteryfor a long service life

● Impact-resistant, splashproof ABS housing:For rough use onbuilding sites

● Guide skids:Centred camera guidancein the pipe

● Pinhole lens, LED illumination:Brilliant image quality forfault-free diagnosis

● Rugged tubular frame:Balanced carryingposition and securestanding

● Video In / Video Out:Video recording andvideo playback

● Digital metering readout:Permits the precise positionto be determined

● Monitor cover acts as glare shield: Optimum image recognition

NEW!


7.6m

ListPrice$ $ ListPrice$ ProdProduct PartNo. Size excl.GST GST incl.GST Grp

Optional metering counterReinforced push cable New, scratch-resistant sapphire lens New union nut with edge protectionIntegrated shock absorber

RoCam MobileColour

Rocam Mobile Colour Basic 69620W 12.5kgs B Rocam Mobile Colour with metering counter 69625W 13.0kgs BRocam Mobile Colour with metering counter & locator 69630W 14.1kgs B

Performance features● Excellent manoeuvrability, thanks to movable camera head● One-man, single-handed device● Easy maintenance● Continuously adjustable brightness of LEDs● Integrated stowage compartment● Battery charge indicator● Duo-Power: Mains operation 240 V / 50–60 Hz or 18 V battery

ROCAM® mobileDrain TV inspection camera with Duo-Power in b/wFor hollow spaces and drains of 50 to 150 mm dia.Camera head 33 mm dia.Push cable 4,5 mm dia.Push cable length 36 m

● On-board battery charger withcharge status indicator:Cost-saving

● Simple disconnection ofbattery supply:Conserves the batteryfor a long service life

● Impact-resistant, splashproof ABS housing:For rough use onbuilding sites

● Guide skids:Centred camera guidancein the pipe

● Rugged tubular frame:Balanced carryingposition and securestanding

● Video In / Video Out:Video recording andvideo playback

● Digital metering readout:Permits the precise positionto be determined

● Monitor cover acts as glare shield: Optimum image recognition

● New colour monitor:35 % larger, with even better image resolution

● Camera head with sapphire lens, and impact protection:Robust and hard wearing

● CMOS lens, LED illumination:Brilliant image quality for fault-freediagnosis

NEW!



● CMOS lens, LED illumination:Brilliant image quality for fault-freediagnosis

NEW!

CAMERA ACCESSORIES

Black & White Standard Camera Head Only 69401 240V/18V D

Colour Standard Camera Head Only 69501 240V/18V D

Rocam (B/White) Location Upgrade Set 19260 240V/18V B comprising of Transmitter (inside camera head), plus Locator/Receiver with headphones

Rocam (Colour) Location Upgrade Set 19270 240V/18V B comprising of Transmitter (inside camera head), plus Locator/Receiver with headphones

Rocam Locator Only 69255 B

Rocam USB Video adaptor 69560 BAnalogue to digital converter for recordingon laptop or PC. Comes complete withcapture / DVD creation software.Software compatible with Windows

Additional Guide Skids (each) H82306 B

Optional Ball Type Skid 74628 B

Rocam Mini Module 069300 Black & White B including 25mm mini camera on flexi probe 069350 Colour B with 5 metres of 3.5mm coiled push rod. For 40mm Ø pipes with multiple bends. Suitable for use with any Rocam system

Replacement Camera Positioning Cable 69480 36m D

Camera Push Rod 74619 30m BFor additional strength and reinforcement(Must be used in conjunction with a ball skid)

Camera Service Kit (lens, cap and seals) Prices on application to Rothenberger Australia sales department

Rocam Mobile Battery 69550 24V / 1,4 Ah - NiCd B

Rocam Mobile Charging unit 69555 24V B




ELECTRIC DRAIN CLEANING MACHINES

Extremely powerful compact drain cleaning machines needing only one man operation. All machines have a fast rpm, with full power delivered to the wide range of cleaning heads which are capable of tackling almost any type of blockage or obstruction

R650 Drain Cleaning Machine • Powerful 0.8kW (1.1hp) motor • Lightweight – only 22.3kg • Versatile – driving 5/8 & 7/8" cables • Long reach – up to 60 metres with 7/8" cable • Full bore cleaning – up to 6" diameter

R650 Drain Cleaning Machine only 72670W 240 Volts D (without cables, tools or accessories)R650 Drain Cleaning Machine Package 72680W 240 Volts D complete with 7/8" Spiral & Tool Set comprising of: 5 x 7/8" x 15' Spirals, one each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shark tooth cutter, Shovel Drill, Bulb Head Drill, Separating Key

R750 Pipe & Drain Cleaning Machine • Powerful 0.9kW (1.23hp) motor • Portable – 31.5kg + inbuilt wheels • Versatile – driving 7/8" & 11/4" cables & 5/8” with adaptor • Longer reach – up to 80 metres with 11/4" cable • Full bore cleaning – up to 8" diameter

R750 Drain Cleaning Machine only 72904W 240 Volts D (without cables, tools or accessories)

R750 Drain Cleaning Machine Package 72904WK 240 Volts D complete with 11/4" Spiral & Tool Set comprising of: 5 x 11/4" x 15' Spirals, one each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shovel Drill, Retriever Drill, Shark Tooth Cutter, Separating Key, Ronwonal Spray

Spiral & Tool Set 7/8" comprising of: 72955N Set D 5 x 7/8" x 15' Spirals, one each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shark tooth cutter, Shovel Drill, Bulb Head Drill, Separating Key

Spiral & Tool Set 11/4" comprising of: 72963N Set D 5 x 11/4" x 15' Spirals, one each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shovel Drill, Retriever Drill, Shark Tooth Cutter, Separating Key, Ronwonal Spray

ACCESSORIES FOR R650 & R750 DRAIN CLEANING MACHINES5/8" x 8' Standard Spiral Cable 72431N C 7/8" x 15' Standard Spiral Cable 72441N C 11/4" x 15' Standard Spiral Cable 72451N C 5/8" x 8' (SMK) Spiral Cable 72433N C 7/8" x 15' (SMK) Spiral Cable 72442N C 11/4" x 15' (SMK) Spiral Cable 72452N C5/8" x 8' RO-Power Profile Spiral Cable 72490W C 7/8" x 15' RO-Power Profile Spiral Cable 72492W C 11/4" x 15' RO-Power Profile Spiral Cable 72493W C

11/4" Trap Leader 72465 C




5/8" Straight Drill 72161 1"–3" C 7/8" Straight Drill 72221 2"–4" C 11/4" Straight Drill 72321 3"–10" C

5/8" Bulb Head Drill 72163 11/2"–3" C 7/8" Bulb Head Drill 72263 2"–4" C 11/4" Bulb Head Drill 72363 3"–10" C

5/8" Hook Retriever Drill 72162 2"–3" C 7/8" Hook Retriever Drill 72203 3"–6" C 11/4" Hook Retriever Drill 72325 3"–10" C

5/8" Funnel Retriever Drill 72165 2"–4" C 7/8" Funnel Retriever Drill 72222 4"–6" C 11/4" Funnel Retriever Drill 72322 4"–10" C 5/8" Double Fork Blade Cutter 72154 2"–4" C 5/8" x 13/4" Blade Drill 72171 21/2"–4" C

7/8" x 21/2" Shovel Drill 72261 4"–6" C 11/4" x 21/2" Shovel Drill 72360 4"–6" C 11/4" x 31/2" Shovel Drill 72361 6"–8" C

5/8" x 13/4" Crossblade Drill 72177 3"–4" C 7/8" x 21/2" Crossblade Drill 72276 4"–6" C 11/4" x 31/2" Crossblade Drill 72376 5"–8" C

7/8" x 3" Shark Tooth Cutter 72250 4"–6" C 11/4" x 3" Shark Tooth Cutter 72350 6"–8" C 3" Replacement Shark Tooth Blade 72258 4"–6" C 4" Replacement Shark Tooth Blade 72259 6"–8" C

7/8" x 21/2" Two Way Root Cutter 72265 3"–4" C 11/4" x 31/2" Two Way Root Cutter 72366 6"–8" C 5/8" Spiral Separating Key 72100 C 7/8" & 11/4" Spiral Separating Key 72101 C

Studded Guide Glove (left) 72120 C Studded Guide Glove (right) 72121 C

Set of 3 Clutch Jaws for R650 72666 C Set of 3 Clutch Jaws for R750 72563 C 5/8" Drive Adaptor for R750 72915 C Spiral Basket for 5/8" spirals 72110 C Spiral Basket for 7/8" spirals 72112 C Spiral Basket for 11/4" spirals 72111 C

Replacement Guide Hose to fit 22mm Spiral 72541 C Replacement Guide Hose to fit 32mm Spiral 72559 C

Side Cover R650 (Side with handle hole) L20300 Each C Side Cover R650 (Side with NO handle hole) L20299 Each C

Side Cover R750 (Same cover for both sides) H99055 Each C




POLYPROPYLENE DRAIN RODS

The simplest way to remove any obstruction in a drain. Each rod is 3ft long and has brass UNIVERSAL type joints.

Set of 10 Drain Rods, complete 130080S Set B with 4" plunger and worm screw

Individual 3' Drain Rod 130055S 3' x 3/4" B 4" Rubber Plunger 130059 B 2" Double Worm Screw 130063 B 4" Drop Scraper 130065 B Clearing Wheel 130069 B 4" Drain Brush 130071 B Rotating handle 130076 B

ROPUMP SUPER PLUS

Ropump Super - Plus - with adjustable 72070XS 4” Bhandle, two Adaptors for Sinks, Baths, Shower Trays and Toilet Pans. Newly designed hand ergonomichand grip. Dual sided sealing designed for greatersuction

STEEL DRAIN TEST PLUGS

Used for sealing or blocking off drain 130091 4" B pipes, prior to air testing. Manufactured in 130092 6" B steel with a protective plastic thread cap 130094 9" B

POWER CLEANER

Disposable, aerosol style drain unblocker. 70630S A Simple and easy to use, the Power Cleaner clears even the most stubborn blockages in seconds. Environmentally friendly.

NEW!




VICES

Hinged Yoke Vice with easy opening and 4500200 1/8"–2" B closing action and positive grip 4500400 1/8"–4" B

Quick Release Chain Vice with lever 4040200 1/8"–21/2" A action to tighten or release the chain 4040400 1/8"–4" A 4040600 1/4"–6" A

PORTABLE WORK STANDSTripod Stand 4640000 B The professional pipe-fitters work stand. With wide angle folding legs for exceptional stability, complete with ceiling brace, bending holes for 3/8", 1/2" and 3/4" steel pipes and a durable aluminium top plate. Will accept 2" Hinged Yoke Vice and all Chain VicesCastors for tripod stand 000999 Each B Tri-Stand 4631000S B The traditional style of work stand with a fold down platform for stability and an adjustable rear leg to enable full lengths of steel pipe to be handled. Complete with 2" hinged yoke vice Universal Pipe Support Stand Heavy duty tubular steel construction907kg capacity adjustable height 27” - 50” 10640 D SUPER CUT HAND RATCHET THREADERS

Advanced design ratchet stocks and high-specification die heads and dies allow for easy threading in tight spaces. All sets fully equipped within a robust carrying case

Super Cut 1/2"–1" BSPT Set 6002409 1/2",3/4",1" A

Super Cut 1/2"–11/4" BSPT Set 6002206 1/2",3/4",1",11/4" A

Super Cut 1/2"–2" BSPT Set 6002302 1/2",3/4",1", A 11/4",1

1/2",2"

Super Cut Die Heads including Dies. 6002D00 1/4" BSPT A Interchangeable with most Leading 6003D00 3/8" BSPT A Brands of Hand Ratchet Threaders and 6004D00 1/2" BSPT A Hand Held Power Threaders 6005D00 3/4" BSPT A 6006D00 1" BSPT A 6007D00 11/4" BSPT A 6008D00 11/2" BSPT A 6009D00 2" BSPT A

Ratchet Handles 6000000 1/8"-11/4" A 6000100 11/2"-2" A

Die Head Adaptor 6000115 AAllows 6000100 handle to take dies 1/8"-11/4"


Prod Part No. Grp

R865795 3.2mm/8TPI 140x1.6 (51/2") C R865794 2.5mm/10TPI 200x1.6 (8") C


NEW!

SUPERTRONIC 2000 PORTABLE POWER THREADERS

High performance power threading with versatile applications without a vice. 15–25 rpm threading with 60 rpm geared reverse. All sets fully equipped within a robust carrying case

Supertronic Economy Machine Only 8630200 C

Supertronic Economy 240 Volts 8632206 1/2" 3/4",1",11/4" C 1/2"–11/4" BSPT Set

Supertronic 2000 240 Volts 8642202 1/2",3/4",1",11/4" C 1/2"–2" BSPT Set 11/2", 2"

(Note: 8630200 & 8632206 will not accept dies larger than 11/4”)

SUPERTRONIC MINI PORTABLE POWER THREADERThe latest addition to our range of portablepower threaders. Helicoidal power transmissionmeans it is incredibly strong and long lasting.Electronic reverse to reduce weight and increaseportability. Smallest head on the market. 8652000 1/2” ,3/4 ,1” C

TIGER PIPE SAW KIT

Powerful, fast cutting universal saw with a wide range of applications for general purpose use with a 3 position side handle and square cutting of pipe using a pipe clamp. For use with all popular saw blades with “U” or “L” shaped connection tangs. Incorporates powerful 1,010 watt universal motor and safety switch.ROTIGER 3000 Set 8342201 240 Volts C complete with 2” pipe clamp, 2 saw blades and carrying caseOptional chain pipe clamp for 4”Ø pipes 8340094 CSAW BLADES (PACKS OF 5)

ROLL GROOVER AND BASE PLATES

Compact, durable and efficient lightweight roller groover unit. For use with all threading machines with capacity 2"–6" (Can be adapted togo down to 1” with optional grooving roller and shafts)

Roll Groover 8872000SE D Note: Roll Groover must be used in conjunction with a Base Plate. Base Plate does not come with Roll Groover and must be ordered separately. Grooving Roller and Shaft 1” 8870905 DGrooving Roller and Shaft 11/4”- 11/2” 8870906 DBase Plate for Supertronic 2SE 88709B50 D Base Plate for Supertronic 3SE 88709B80 D Base Plate for Supertronic 4SE 88709B100 D Base Plate for Supermatic 300 88709RO300 D Base Plate for Ridgid 300 88709RI300 D

Base Plate and accessories for Supertronic 2000* 8870921 D * Must be used with Portable Work Stand (see page.23 & 25 for more info)


Roll Groover 8872000SE (see p.g 24)Supertronic Economy Machine Only 8630200 (see p.g. 24)(Use to drive roll groover if no threading required)Supertronic Economy 1/2" 3/4",1",11/4" 8632206 (see p.g. 24) orSupertronic 2000 1/2",3/4",1",11/4" 11/2",2" 8642202 (see p.g. 24)Tripod Stand 4640000 (see p.g. 23) Castor Wheels 000999 (see p.g. 23)Base Plate and Accessories 8870921 (see p.g. 24)Pipe Support Stand 10640 (see p.g. 23)

Ideal setup for the tradesman that needs to do many small low volume jobs at different locations and requires the equipment to be moved easily around job sites with just one operator.

Compact enough for quick and easy setup, and packs up into only a few small components that will easily fit in the back of most work vehicles without taking up much space.

A real portability solution for the mobile tradesman.

Mobile Roll Grooving and Threading Set

Castors for tripod stand available

26

TERMS AND CONDITIONS OF SALE

In these Conditions “the Seller” means SUPER EGO Division of Rothenberger Australia Pty Ltd “the Buyer” means the person, firm or company purchasing the goods; “the Goods” means the goods or materials which shall be the subject of the Contract between the Seller and the Buyer. “the price” means the price specified in the Seller’s Current Price List or otherwise communicated to the Buyer and agreed.

Acceptance of OrderAll orders accepted by the seller are subject to these Conditions of Sale unless otherwise varied by agreement in writing. Contracts for delivery by instalments shall be deemed to be indivisible.

The Price1. Orders are accepted at the Price current at the date of despatch of the goods, The

seller reserves the right at any time before delivery to increase the Price or withdraw from the Contract in which event the Buyer may within seven days of receipt of notice to that effect by notice in writing to the Seller cancel the Order so far as the undelivered balance of the goods is concerned.

2. Unless otherwise stated the Price of the Goods shall include standard packaging and delivery to any one address within the metropolitan area Adelaide, Brisbane, Melbourne, Perth and Sydney specified in writing by the Buyer to and agreed by the Seller prior to delivery except that in the case of Orders below a $150.00 in net value accepted by the Seller and the Buyer will pay a A$15.00 minimum order charge plus whichever is the greater of A$7.50 or the relevant invoicing/carriage or postal charges. The Seller reserves the right to reject any order which is uneconomical to despatch.

3. Prices in the Price Column of the Seller’s Price List are per item unless otherwise shown.

4. Containers and/or packages are not returnable unless so requested by the Seller.5. Prices charged are inclusive of GST (Goods & Service Tax). GST is charged at 10% unless

otherwise shown. GST is subject to amendments by the authorities concerned.

Payment1. Unless otherwise stated on the Seller’s invoice or otherwise agreed in writing,

payment for the Goods shall be made not later than 30 days from the statement date but so that the Seller may at any time on or after acceptance by notice in writing to the Buyer vary the terms of payment by demanding immediate payment or (at the Seller’s option) adequate security for sums which will be due hereunder.

2. Time of payment shall be of the essence and failure by the Buyer to pay the price or any instalment thereof in due time shall entitle the Seller to treat such failure as a repudiation of the whole contract by the Buyer and to require the Buyer to make immediate payment of all monies due or to become due to recover from the Buyer damages for such breach of contract and/or (at the Seller’s option) to charge interest at three (3) per centum per month or three per centum above the Base rate of ANZ Banking Group, whichever shall be the greater, from the due date until payment.

3. All accounts are payable net.

DeliveryUnless otherwise agreed in writing between the Seller and the Buyer the following provisions shall apply:1. When the Goods are put in the post or handed over to the carrier for delivery to the

address specified on the Seller’s invoice, delivery of the goods shall have been made.2. Any delivery date specified in the order or the Seller’s acceptance are estimates only,

The Seller shall have no liability for failure to meet such dates. In any event the Seller shall not be liable for consequential or special damages arising directly or indirectly out of delay in delivery. The Buyer shall not be entitled to refuse to accept Goods because of late delivery.

3. From delivery the risk of any loss or damage to or deterioration of the Goods shall be borne by the Buyer.

4. The Seller is free of any liability to inform the Buyer of consignment by sea transit.

Property1. Property in Goods meaning legal ownership is retained by the Seller until all sums due

by the Buyer to the Seller on any account are paid.2. Property in Goods incorporated or packaged with other products is retained by The

Seller in so far as such Goods are identifiable.3. Possessions by the Buyer of Goods in the legal ownership of the Seller shall be on a

fiduoiary basis only.4. The Goods shall be stored separately by the Buyer so as to be identifiable as the

property of the Seller. That the Goods are in store shall be prima facie evidence of identity with those of like brand and description supplied on the latest applicable invoice.

5. Proceeds of sale by the Buyer shall be traceable for the beneficial ownership of the Seller.

6. The Buyer shall keep goods in the legal ownership of the Seller in clean and merchantable condition and allow no lien, encumbrance or representation so as to prejudice the legal ownership of the Seller.

7. The Buyer will permit, when in the discretion of the Seller it is desirable, the servants and agents of the Seller to enter premises, stock take, resume possession of and remove Goods in the legal ownership of the Seller.

8. The Seller may inform any banker reasonably believed to be seeking or to hold any charge over assets of the Buyer of the terms of this condition.

LienThe Seller shall in respect of all unpaid debts from the Buyer have a general lien on all goods of the Buyer in the possession of the Seller and after the expiry of fourteen (14) days written notice to the Buyer be entitled to dispose of such Goods as it deems fit and apply the proceeds towards such debts.

Inspection on Receipt and Notices of Claim1. The Buyer shall inspect the Goods immediately upon receipt and shall within three

(3) days of such receipt ( time being of the essence) give notice in writing to the Seller and the Carrier of all claims on account of damage to or loss of goods in transit.

2. Claims for non-delivery must be submitted in writing to The Seller within ten (10) days after notification of dispatch.

3. Quality claims must be made in writing immediately after The Buyer learns of the defect. Any Goods returned as faulty will (subject as hereafter mentioned) be replaced where faults in workmanship or material are proved.

4. Any claim not made in writing and received by the Seller within the above time limits shall be deemed waived.

5. If the Seller fails to make delivery or makes defective delivery of any one instalment such shall not vitiate the contract as regards other instalments.

6. Any right of the Buyer to set off the value of any shortage, defective goods or Goods not otherwise conforming to contract shall be restricted to the specific invoice for the goods in question and shall not apply to previous or future accounts.

Warranty and Limitation of Liability1. The Seller warrants that the Goods are produced within the accepted tolerance level of

its standard specifications and are merchantable quality. Except as preluded by statue all other conditions or warranties whether expressed or implied by statue common, law or otherwise are excluded.

2. The Sellers liability for any and all direct or indirect loss or damage to the Buyer for defects in the Goods or any other cause shall be limited to the purchase price of the Goods to which such loss or damage is attributed.

3. The Seller shall be under no liability in contract or in tort for any loss or damage or personal injury arising directly or indirectly out of the supply or use of the goods or containers.

Force Majeure1. Deliveries may be partially or totally suspended by either party during any period in

which it is prevented from manufacturing, delivering or taking delivery of the Goods through any circumstances outsides its control.

2. If because of such circumstances, the Seller is unable to supply total requirements the Seller may allocate its available supply (after its own requirements) among all of its customers as the Seller thinks fit.

3. Delivery so suspended shall be cancelled without liability, but the contract between the parties shall remain unaffected.

IndemnityThe Buyer indemnifies the Seller in respect of all damage or injury occurring to any person, firm, company or property and against all actions, suits claims and demands, charges or expenses in connection therewith for which the Seller may become liable in respect of the Goods sold under the contract in the event that the damage of injury shall have been occasioned otherwise than by the negligence of the Seller.

DefaultThe Seller reserves the right (without prejudice to its other rights and remedies) either to terminate the contract between parties or to suspend further deliveries under it or require payment in advance if the Buyer fails to pay for any one delivery when the same becomes due or to the Buyers financial responsibility becomes unsatisfactory to the Seller or if the Buyer, being a company, goes into liquidation or voluntary administration or has a receiver/or manager appointed or not being a company has a receiving order made against him or the Buyer enters into arrangement or composition with creditors.

DutyAll import duties, taxes and other imposts will be for the Buyer’s account.

Patents and Trade MarksNo representation, warranty or indemnity is given by the Seller that the Goods do not infringe any letters patent, trade marks, registered designs or other industrial rights or intellectual property.

Export of goodsThe Buyer shall not export any Goods outside Australia without first notifying the Seller of the identity and address of the customer and of the price at which the Goods are sold to the customer.

Return of GoodsReturn of goods will only be accepted if agreed in writing by the Seller in which event the Seller shall be entitled to recover from the Buyer a handling charge being not less than A$15.00 or 15% of the selling price of the Goods ( whichever is the greater). All Goods must be new and of current design and have to be in resaleable condition as approved by The Seller.

AssignabilityThe contract of which these conditions form part is personal to the Buyer who shall not assign benefit thereof without the Seller’s written consent.

SUPER EGO reserve the right to change the specification of any product without prior notice. Whilst every effort has been made to ensure accuracy, no responsibility is admitted for any errors or omissions.

27TEL: TOLL FREE 1800 186 657 FAX: TOLL FREE 1800 286 657

Notes

SUPER-EGO DIVISION ROTHENBERGER AUSTRALIA PTY LTD

A.B.N. 12 008 411 658 Unit 12/5 Hudson Avenue, Castle Hill NSW 2154

Telephone: (02) 9899 7577 Facsimile: (02) 9899 7677 Email: [email protected]

Web site: www.superego.com.au

A member of the ROTHENBERGER group of companies

Documents

Trade Catalogue 2007 - SUPER-EGO Ego catalogue.pdf · Trade Catalogue 2007. SUPER EGO TOOLS is a member of the ROTHENBERGER TOOL GROUP ... Roll Groover and Base Plates 3. 4 TEL: TOLL