GRUNDFOS DATA BOOKLET

TP 80-240/2-A-F-A-BQQE 400D 50HZ Grundfos Pump 96108720

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/TP000/96108720/TP-80-240-2-A-F-A-BQQE.html

info@lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. Description1 TP 80-240/2 A-F-A-BQQE

Product No.: 96108720

Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.

Further product detailsPumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.

1: Pump housing2: Impeller3: Stub shaft4: Pump head/motor stool5: Wear rings

The pump housing is provided with a replaceable bronze neck ring to reduce the amount of liquidrunning from the discharge side of the impeller to the suction side. The impeller is secured to the shaftwith a nut.

The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:

- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionThe motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.The pump stub shaft is fastened directly on the motor shaft with key and set screws.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.

The motor is flange-mounted with free-hole flange (FF).Motor mounting designation in accordance with IEC 60034-7: IM B 5, IM V 1 (Code I) / IM 3001, IM3011 (Code II).

The motor efficiency is classified as IE3 in accordance with IEC 60034-30.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.

The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Speed for pump data: 2920 rpmRated flow: 70.5 m³/hRated head: 20.7 mActual impeller diameter: 135 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B

Materials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Cast ironEN-JL1030ASTM A48-30 B

Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 80Pump inlet: DN 80Pump outlet: DN 80Pressure rating: PN 16Port-to-port length: 360 mmFlange size for motor: FF265

Electrical data:Motor type: 132SCIE Efficiency class: IE3Rated power - P2: 5.5 kW

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D VRated current: 11 AStarting current: 1080-1180 %Cos phi - power factor: 0,87-0,82Rated speed: 2920-2940 rpmEfficiency: IE3 89,2%Motor efficiency at full load: 89.2 %Motor efficiency at 3/4 load: 90.0 %Motor efficiency at 1/2 load: 89.6 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.69ErP status: EuP Standalone/Prod.Net weight: 90 kgGross weight: 107 kgShipping volume: 0.18 m³

Printed from Grundfos Product Centre [2018.02.043]

96108720 TP 80-240/2 50 HzH

[m]

0

2

4

6

8

10

12

14

16

18

20

22

24

26

Q [m³/h]0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85

eta[%]

0

10

20

30

40

50

60

70

80

90

100

TP 80-240/2, 3*400 V, 50Hz

P[kW]

0

1

2

3

4

5

6

7

NPSH[m]

0

2

4

6

8

10

12

14

P1

P2

Printed from Grundfos Product Centre [2018.02.043]

H[m]

0

2

4

6

8

10

12

14

16

18

20

22

24

26

Q [m³/h]0 10 20 30 40 50 60 70 80

eta[%]

0

10

20

30

40

50

60

70

80

90

100

TP 80-240/2, 3*400 V, 50Hz

P[kW]

0

1

2

3

4

5

6

NPSH[m]

0

2

4

6

8

10

12P1

P2

80

125 119

134150 150

220300

360

739

010

524

314

4

180

Rp 1/4

M16

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP2

11 T

HER

MAL

LY P

RO

TEC

TED

WH

EN T

HE

THER

MIS

TOR

S AR

EC

ON

NEC

TED

TO

AM

PLIF

IER

REL

AY F

OR

CO

NTR

OL

OF

MAI

N S

UPP

LYTH

ERM

ISTO

RS

PTC

AC

CO

RD

ING

TO

DIN

440

82

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

Description ValueGeneral information:Product name: TP 80-240/2 A-F-A-BQQEProduct No: 96108720EAN number: 5700396976860Technical:Speed for pump data: 2920 rpmRated flow: 70.5 m³/hRated head: 20.7 mHead max: 240 dmActual impeller diameter: 135 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Cast ironEN-JL1030ASTM A48-30 B

Material code: AInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINConnect code: FPipe connection: DN 80Pump inlet: DN 80Pump outlet: DN 80Pressure rating: PN 16Port-to-port length: 360 mmFlange size for motor: FF265Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 132SCIE Efficiency class: IE3Rated power - P2: 5.5 kWPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D VRated current: 11 AStarting current: 1080-1180 %Cos phi - power factor: 0,87-0,82Rated speed: 2920-2940 rpmEfficiency: IE3 89,2%Motor efficiency at full load: 89.2 %Motor efficiency at 3/4 load: 90.0 %Motor efficiency at 1/2 load: 89.6 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTCMotor No: 87322229Others:Minimum efficiency index, MEI ≥: 0.69ErP status: EuP Standalone/Prod.Net weight: 90 kgGross weight: 107 kgShipping volume: 0.18 m³

80

125119

134

150150

220

300

360

180

Rp 1/4

M16

Printed from Grundfos Product Centre [2018.02.043]

96108720 TP 80-240/2 50 Hzcos phi

eta

0.0

0.2

0.4

0.6

0.8

P2 [kW]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

I[A]

0

4

8

12

16

TP80-240/2 + 132SC 5.5 kW 3*400 V, 50 Hz

eta

cos phi

I

n[rpm]

2400

2600

2800

3000

3200

P1[kW]

0

2

4

6

n

P1

Printed from Grundfos Product Centre [2018.02.043]

96108720 TP 80-240/2 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

80

125 119

134150 150

220300

360

739

010

524

314

4

180

Rp 1/4

M16

Printed from Grundfos Product Centre [2018.02.043]

96108720 TP 80-240/2 50 Hz

Note! All units are in [mm] unless others are stated.

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP2

11 T

HER

MAL

LY P

RO

TEC

TED

WH

EN T

HE

THER

MIS

TOR

S AR

EC

ON

NEC

TED

TO

AM

PLIF

IER

REL

AY F

OR

CO

NTR

OL

OF

MAI

N S

UPP

LYTH

ERM

ISTO

RS

PTC

AC

CO

RD

ING

TO

DIN

440

82

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.comwww.lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89