11
GRUNDFOS DATA BOOKLET TP 100-60/4-A-F-A-BUBE 400Y 50HZ Grundfos Pump 96402628 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/TP000/96402628/TP-100-60-4-A-F-A-BUBE.html [email protected] tel. +31-15-261.09.00 fax. +31-15-261.62.89 BE > THINK > INNOVATE

TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

GRUNDFOS DATA BOOKLET

TP 100-60/4-A-F-A-BUBE 400Y 50HZ Grundfos Pump 96402628

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/TP000/96402628/TP-100-60-4-A-F-A-BUBE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Page 2: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. Description1 TP 100-60/4 A-F-A-BUBE

Product No.: 96402628

Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.

Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.

PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.

1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head

The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.

The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:

- Rotating seal ring material: Tungsten carbide (WC)- Stationary seat material: Carbon graphite, resin-impregnated

This is a widely used material pairing. If the pumped liquid contains particles, wear on the seal facesmust be expected. Due to the favourable lubricating properties of carbon graphite, the seal is suitablefor use even under poor lubricating conditions, such as hot water. However, under such conditions,wear on the carbon graphite face reduces seal life.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

Page 3: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionA circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.

The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a rigid two-part coupling.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.

The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).

The motor efficiency is classified as IE3 in accordance with IEC 60034-30.The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 140 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Speed for pump data: 1430 rpmRated flow: 63 m³/hRated head: 5.04 mActual impeller diameter: 144 mmPrimary shaft seal: BUBECurve tolerance: ISO9906:2012 3B

Materials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 100Pump inlet: DN 100Pump outlet: DN 100Pressure rating: PN 10Port-to-port length: 450 mmFlange size for motor: FT115

Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y V

Page 4: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionRated current: 4,85/2,80 AStarting current: 820-900 %Cos phi - power factor: 0,71-0,64Rated speed: 1450-1460 rpmEfficiency: IE3 84,1%Motor efficiency at full load: 84.1 %Motor efficiency at 3/4 load: 84.6 %Motor efficiency at 1/2 load: 82.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 61.8 kgGross weight: 67.7 kgShipping volume: 0.16 m³

Page 5: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

96402628 TP 100-60/4 50 HzH

[m]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

Q [m³/h]0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

eta[%]

0

10

20

30

40

50

60

70

80

90

100

TP 100-60/4, 3*400 V, 50Hz

P[W]

0

200

400

600

800

1000

1200

1400

1600

NPSH[m]

0

1

2

3

4

5

6

7

8

P1

P2

Page 6: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

H[m]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

Q [m³/h]0 10 20 30 40 50 60 70

eta[%]

0

10

20

30

40

50

60

70

80

90

100

TP 100-60/4, 3*400 V, 50Hz

P[W]

0

200

400

600

800

1000

1200

1400

NPSH[m]

0

1

2

3

4

5

6

7P1

P2

122

182

625

450

200

225

100

173 121

110 178173173

M16

RP 1/4

L1 L2 L3

L3L2L1

LOW VOLTAGEDIRECTION OF ROTATION

HIGH VOLTAGEDIRECTION OF ROTATION

Description ValueGeneral information:Product name: TP 100-60/4 A-F-A-BUBEProduct No: 96402628EAN number: 5700390675691Technical:Speed for pump data: 1430 rpmRated flow: 63 m³/hRated head: 5.04 mHead max: 60 dmActual impeller diameter: 144 mmPrimary shaft seal: BUBECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: AInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 10 barFlange standard: DINConnect code: FPipe connection: DN 100Pump inlet: DN 100Pump outlet: DN 100Pressure rating: PN 10Port-to-port length: 450 mmFlange size for motor: FT115Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 140 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 4,85/2,80 AStarting current: 820-900 %Cos phi - power factor: 0,71-0,64Rated speed: 1450-1460 rpmEfficiency: IE3 84,1%Motor efficiency at full load: 84.1 %Motor efficiency at 3/4 load: 84.6 %Motor efficiency at 1/2 load: 82.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTOMotor No: 86U05905Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 61.8 kgGross weight: 67.7 kgShipping volume: 0.16 m³

450

225

100

173121

110178173173

M16

RP 1/4

Page 7: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

Description ValueSales region: GB

Page 8: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

96402628 TP 100-60/4 50 Hzcos phi

eta

0.0

0.2

0.4

0.6

0.8

P2 [kW]0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4

I[A]

0.0

1.0

2.0

3.0

4.0

TP100-60/4 + 90SB 1.1 kW 3*400 V, 50 Hz

eta

cos phi

I

n[rpm]

1200

1300

1400

1500

1600

P1[kW]

0.0

0.4

0.8

1.2

1.6

n

P1

Page 9: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

96402628 TP 100-60/4 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

122

182

625

450

200

225

100

173 121

110 178173173

M16

RP 1/4

Page 10: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Printed from Grundfos Product Centre [2018.02.043]

96402628 TP 100-60/4 50 Hz

Note! All units are in [mm] unless others are stated.

L1 L2 L3

L3L2L1

LOW VOLTAGEDIRECTION OF ROTATION

HIGH VOLTAGEDIRECTION OF ROTATION

Page 11: TP 100-60/4-A-F-A-BUBE 400Y 50HZ · Printed from Grundfos Product Centre [2018.02.043] Position Qty. Description 1 TP 100-60/4 A-F-A-BUBE Product No.: 96402628 Single-stage, close-coupled,

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89