of 110/110
IBM Netcool Performance Manager Tivoli Document Revision R2E1 Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

TNPM Huawei U2000 DSLAM 2.1.0.0 Tech Pack User Guide

  • View
    440

  • Download
    10

Embed Size (px)

Text of TNPM Huawei U2000 DSLAM 2.1.0.0 Tech Pack User Guide

Tivoli Netcool Performance ManagerDocument Revision R2E1

IBM

Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Note Before using this information and the product it supports, read the information in Notices on page 93.

Copyright IBM Corp. 2010 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

ContentsChapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 2: Devices and services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Summary of device technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Bulk input file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bulk input file name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bulk input file schema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Bulk adapter design files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 3: Supported reports and KPIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Reporter sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Reporter set tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Reporter set contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Key performance indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 4: Configuring the technology pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Before you begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Configure the technology pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Verifying resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Configuring the UBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Configuring generate_config.pl.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later) . . 43Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 HUAWEI_U2000_DSLAM.DESIGNFILE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 HUAWEI_U2000_DSLAM.DSLAM_CONFIG.DELETEONACQUIRE. . . . . . . . . . . . . . . . . . . . 45 HUAWEI_U2000_DSLAM.DSLAM_CONFIG.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 47

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

iii

Contents

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.DELETEONACQUIRE . . . . . . . . . . . . . . . . 49 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA11.DELETEONACQUIRE . . . . . . . . . . . . . . . . 51 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA11.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA12.DELETEONACQUIRE . . . . . . . . . . . . . . . . 53 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA12.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA13.DELETEONACQUIRE . . . . . . . . . . . . . . . . 55 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA13.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA14.DELETEONACQUIRE . . . . . . . . . . . . . . . . 57 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA14.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA15.DELETEONACQUIRE . . . . . . . . . . . . . . . . 59 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA15.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA16.DELETEONACQUIRE . . . . . . . . . . . . . . . . 61 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA16.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA2.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 63 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA2.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA3.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 65 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA3.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA4.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 67 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA4.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA5.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 69 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA5.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA6.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 71 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA6.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA7.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 73 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA7.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA8.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 75 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA8.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA9.DELETEONACQUIRE . . . . . . . . . . . . . . . . . 77 HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA9.URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 HUAWEI_U2000_DSLAM.INPUT_DIRECTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 HUAWEI_U2000_DSLAM.INPUT_FTP_PASSWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 HUAWEI_U2000_DSLAM.INPUT_FTP_USERNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 HUAWEI_U2000_DSLAM.INPUT_HOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 HUAWEI_U2000_DSLAM.INPUT_USE_SECURE_FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

iv

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Contents

INSTANCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 SERVICE_INSTANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Appendix B: Template file (Tivoli Netcool Performance Manager pre-v4.4.3 only) . 87Template file name and location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Pack-specific UBA parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Additional information about UBA parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 INSTANCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DB_USERNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

v

Contents

vi

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 1: Introduction

This manual describes the IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM Technology Pack. Specifically, the manual describes the reports that display information about the devices and technologies that operate in the Huawei U2000 environment.

AudienceThe audiences for this manual are the network administration engineers at IBM customer sites who will install, configure, and use the Huawei U2000 DSLAM Technology Pack as part of their Tivoli Netcool Performance Manager installation. IBM Professional Services engineers may also find this manual useful. To install and use the Huawei U2000 DSLAM Technology Pack, you should have a working knowledge of the following subjects: Tivoli Netcool Performance Manager DataMart TCP/IP networks Telecommunications network management Administration of the operating system

The audiences should also be familiar with the specific technology that the Huawei U2000 DSLAM Technology Pack deals with, in this case Huawei U2000.

OrganizationThis guide is organized as follows: Chapter 1, Introduction Provides a general introduction to the Tivoli Netcool Performance Manager product suite. Chapter 2, Devices and services Provides an overview of the device technology supported by the technology pack. Chapter 3, Supported reports and KPIs Provides information about the reporter sets and key performance indicators (KPIs) that the Huawei U2000 DSLAM Technology Pack provides for each device operating in the Huawei U2000 environment. Chapter 4, Configuring the technology pack Describes how to configure the Huawei U2000 DSLAM Technology Pack. Appendix A, UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later) Provides UNIX reference pages for each of the pack-specific UBA parameters supplied with the XSD file for the Huawei U2000 DSLAM Technology Pack. Appendix B, Template file (Tivoli Netcool Performance Manager pre-v4.4.3 only) Explains the edits that must be made to the pack-specific UBA parameters delivered in the pack template file.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

1

Chapter 1: Introduction

The Tivoli Netcool Performance Manager product suiteTivoli Netcool Performance Manager is made up of the following components: Tivoli Netcool Performance Manager DataMart is a set of management, configuration and troubleshooting GUIs that the Tivoli Netcool Performance Manager system administrator uses to define policies and configuration, as well as to verify and troubleshoot operations. Tivoli Netcool Performance Manager DataLoad provides flexible, distributed data collection and data import of SNMP and non-SNMP data to a centralized database. Tivoli Netcool Performance Manager DataChannel aggregates the data collected through Tivoli Netcool Performance Manager DataLoad for use by the Tivoli Netcool Performance Manager DataView reporting functions. It also processes on-line calculations and detects real-time threshold violations. Tivoli Netcool Performance Manager DataView is a reliable application server for on-demand, webbased network reports. Tivoli Netcool Performance Manager Technology Packs extend the Tivoli Netcool Performance Manager system with service-ready reports for network operations, business development, and customer viewing.

Figure 1 shows the different Tivoli Netcool Performance Manager modules. Figure 1: Tivoli Netcool Performance Manager modulesDataLoad collects network data. DataChannel computes aggregations and stores data in DataMart. DataMart provides data management and applications. DataView produces and manages reports.

Tivoli Netcool Performance Manager documentationIBM provides the following Tivoli Netcool Performance Manager documentation: Release notes Configuration recommendations User guides References Technical notes Online help

2

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 2: Devices and services

This chapter discusses the following topics:Topic Overview Summary of device technology Bulk input file formats Bulk adapter design files Page 3 3 4 5

OverviewThis chapter provides a summary of the Huawei U2000 device technology, and the associated bulk input file format, that the Huawei U2000 DSLAM Technology Pack is designed to support.

Summary of device technologyThe Huawei iManager U2000 Unified Network Management System (Huawei U2000) can collect data from several different types of network elements: routers, switches, security devices, access equipment, and PTN equipment, as shown in the following figure.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

3

Chapter 2: Devices and services

The Huawei U2000 can store the collected performance data in a database, or as files in a specified directory. Tivoli Netcool Performance Manager technology packs retrieve the data from the files only, not from the database. Tivoli Netcool Performance Manager provides several technology packs to monitor the performance data of Huawei network elements, where each technology pack monitors a different group of data.

Bulk input file formatsThe Huawei U2000 communicates with each Huawei element in the network to gather performance data and other statistics. This data is referred to collectively as network health metrics. The Huawei U2000 creates, on a specified regular basis, a bulk input file that contains the network health metrics and other information. This bulk input file is a Comma-Separated Values (CSV) file. The Universal Bulk Adaptor (UBA) communicates with the Huawei U2000 using the FTP performance northbound interface (NBI) of the Huawei U2000. Bulk input files for a specified time interval are acquired by the UBA script through an FTP process, and then each record in those files is sorted and processed. The Huawei U2000 DSLAM Technology Pack supports multiple input files per UBA, where each input file contains data for one polling period only. The Huawei U2000 DSLAM Technology Pack extracts KPIs from five indicator groups, where each indicator group file contains data for its KPI type. The syntax for these bulk input files is discussed in Bulk input file name on page 4. The Huawei U2000 DSLAM Technology Pack provides a file that interprets these bulk input files. See Bulk adapter design files on page 5 for more information.

Bulk input file nameHuawei U2000 devices produce CSV files that are named using the following syntax:PM_IGIndicatorGroupID_Granularity_Timestamp_SerialNumber.csv

where: IndicatorGroupID specifies the unique identifier of the indicator group. Granularity specifies the collection granularity, which defines the performance measurement period. Timestamp specifies the date on which the data was collected. The timestamp format is as follows:

yyyyMMddHHmmZ where: yyyy specifies a four-digit integer that identifies the year. MM specifies a two-digit integer that identifies the month. dd specifies a two-digit integer that identifies the day. HH specifies a two-digit integer that identifies the metric hour. mm specifies a two-digit integer that identifies the minutes after the metric hour. Z specifies the UTC time. SerialNumber specifies the serial number of the file. This value starts at 01.

4

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 2: Devices and services

Example CSV file name:PM_IG3_15_200909180300Z_01.csv

Bulk input file schemaThe bulk input file schema is defined as follows: The first line provides the indicator group name, the indicator group description, the timestamp, and the number of data records in the file. The first six columns on the second line provide the field headers to describe the device ID, device name, resource ID, resource name, collection time, and granularity period.

Bulk adapter design filesTivoli Netcool Performance Manager bulk adapters can support several data formats for bulk input files, for example CSV, XML, and binary. The Huawei U2000 produces data in CSV format. Each UBA technology pack provides at least one bulk adapter design file to define the data format supported by that technology pack. Technology pack developers implement bulk adapter design files using JavaScript. Some technology packs provide several bulk adapter design files, each of which handles a specific bulk input file format. A bulk adapter design file typically can process both inventory and metrics data from the same bulk input file, and provides a function that creates the bulk collection formula names. When the inventory and metrics are located in separate bulk input files, a technology pack developer typically implements several types of bulk adapter design files. The Huawei U2000 DSLAM Technology Pack provides the following bulk adapter design files: adaptor.js common.js config_schema.js globals.js handlers.js huawei.js logging.js process.js schemas.js xmlschema.js

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

5

Chapter 2: Devices and services

NOTES

6

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

This chapter discusses the following topics:Topic Overview Reporter sets Reporter set tree Reporter set contents Page 7 7 8 9

OverviewThe Huawei U2000 DSLAM Technology Pack supplies a set of reports to display information about the devices and activity associated with the Huawei U2000 environment. The reports contain metrics that are generated by the formulas that this technology pack provides. The metric names are the same as the names of the formulas that generate them. For information about a metric that is listed for a particular report, see the description of the associated formula in the Collection Formulas section of the IBM Tivoli Netcool/Proviso Huawei U2000 DSLAM 2.1.0.0 Technology Pack Reference. For information about how to navigate to a particular report on the DataView portal, see the NOC Reporting tree in the Subelement Groups section of the IBM Tivoli Netcool/Proviso Huawei U2000 DSLAM 2.1.0.0 Technology Pack Reference. This chapter provides information about deployed reports only. For information about understanding report types, creating reports, configuring reports, viewing and working with reports, and deploying reports, see the IBM Tivoli Netcool/Proviso DataView Users Guide. This Technology Pack User Guide assumes an understanding of the report-related topics discussed in the IBM Tivoli Netcool/Proviso DataView Users Guide.

Reporter setsA reporter set contains a group of reporters that together provide information about a specific technology or vendor device. Technology pack developers use the Reporter Set Wizard to choose the type of template on which to base the reporter set. Technology packs use reporter sets as the framework for defining reports. The Huawei U2000 DSLAM Technology Pack reports display, on a Web portal, the collected information about the devices and technologies that operate in the Huawei U2000 environment.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

7

Chapter 3: Supported reports and KPIs

Table 1 shows a summary of the reports in each reporter set provided by the Huawei U2000 DSLAM Technology Pack. Table 1: Reporter set summaryReporter set BRAS Metrics Bit Metrics Card Metrics Frame Metrics IGMP Metrics Line Metrics TOTALS Dashboard 0 0 0 0 0 0 0 Group 1 4 1 5 3 4 18 Resource 1 4 1 5 3 4 18 Detail 2 5 2 7 3 6 25 Threshold 0 0 0 0 0 0 0 TopN 0 0 0 0 0 0 0

See the IBM Tivoli Netcool/Proviso DataView Users Guide for more information about reporter sets and the Reporter Set Wizard.

Reporter set treeThe Huawei U2000 DSLAM Technology Pack provides the following reporter sets, which are listed as they appear in the DataView Navigator tree structure:Huawei U2000 DSLAM BRAS Metrics Bit Metrics Card Metrics Frame Metrics IGMP Metrics Line Metrics

8

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Reporter set contentsThis section describes the contents of the reporter sets provided in the Huawei U2000 DSLAM Technology Pack. For each report it includes the key performance indicators (KPIs) and their Indicator IDs.

BRAS MetricsVLAN Throughput Summary - GSTKPIs VLAN Upflow Account by Packet[100842] VLAN Downflow Account by Packet[100843] VLAN Upflow Account by Byte[100838] VLAN Downflow Account by Byte[100839] VLAN UpStream Account of Network Interface by Packet[102135] VLAN DownStream Account of Network Interface by Packet[102136]

VLAN Throughput Summary - RSTKPIs VLAN Upflow Account by Packet[100842] VLAN Downflow Account by Packet[100843] VLAN Upflow Account by Byte[100838] VLAN Downflow Account by Byte[100839] VLAN UpStream Account of Network Interface by Packet[102135] VLAN DownStream Account of Network Interface by Packet[102136]

VLAN Throughput Summary - DCKPIs Charts Upflow Account by Byte Downflow Account by Packet Upflow Account by Packet Downflow Account by Byte VLAN Upflow Account by Packet[100842] VLAN Downflow Account by Packet[100843] VLAN Upflow Account by Byte[100838] VLAN Downflow Account by Byte[100839]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

9

Chapter 3: Supported reports and KPIs

VLAN Throughput Summary - DC2KPIs Charts DownStream Account of NI by Packet UpStream Account of NI by Packet VLAN UpStream Account of Network Interface by Packet[102135] VLAN DownStream Account of Network Interface by Packet[102136]

Bit MetricsADSL Throughput Summary - GSTKPIs Total Number of Upstream Octets [100559] Total Number of Downstream Octets [100560] Upstream Bandwidth Occupancy [101186] Downstream Bandwidth Occupancy [101187]

PPP Throughput Summary - GSTKPIs Upstream Octets from PPP [100809] Downstream Octets to PPP [100810]

Ethernet Utilization Summary - GSTKPIs Total Number of Tx Octets [100455] Total Number of Rx Octets [100456] Tx Bandwidth Occupancy [100457] Rx Bandwidth Occupancy [100458]

10

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Ethernet Aggregation (LAG) Utilization Summary - GSTKPIs Total Number of Octets Sent [103643] Tx Rate [103669] Total Number of Octets Received [103642] Downstream Bandwidth Occupancy[103672] Max Rate[103743] Rx Rate [103670] Upstream Bandwidth Occupancy[103671]

ADSL Throughput Summary - RSTKPIs Total Number of Upstream Octets [100559] Total Number of Downstream Octets [100560] Upstream Bandwidth Occupancy [101186] Downstream Bandwidth Occupancy [101187]

PPP Throughput Summary - RSTKPIs Upstream Octets from PPP [100809] Downstream Octets to PPP [100810]

Ethernet Utilization Summary - RSTKPIs Total Number of Tx Octets [100455] Total Number of Rx Octets [100456] Tx Bandwidth Occupancy [100457] Rx Bandwidth Occupancy [100458]

Ethernet Aggregation (LAG) Utilization Summary - RSTKPIs Total Number of Octets Sent [103643] Tx Rate [103669] Total Number of Octets Received [103642] Downstream Bandwidth Occupancy[103672] Max Rate[103743] Rx Rate [103670] Upstream Bandwidth Occupancy[103671]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

11

Chapter 3: Supported reports and KPIs

ADSL Throughput Summary - DCKPIs Charts Upstream Octets Downstream Bandwidth Occupancy Upstream Bandwidth Occupancy Downstream Octets Total Number of Upstream Octets [100559] Total Number of Downstream Octets [100560] Upstream Bandwidth Occupancy [101186] Downstream Bandwidth Occupancy [101187]

PPP Throughput Summary - DCKPIs Charts Downstream Octets Upstream Octets Upstream Octets from PPP [100809] Downstream Octets to PPP [100810]

Ethernet Utilization Summary - DCKPIs Charts Outbound % Utilization Inbound Volume Octets Outbound Volume Octets Inbound % Utilization Total Number of Tx Octets [100455] Total Number of Rx Octets [100456] Tx Bandwidth Occupancy [100457] Rx Bandwidth Occupancy [100458]

12

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Ethernet Aggregation (LAG) Utilization Summary - DCKPIs Charts Inbound Volume Octets Send Rate Inbound % Utilization Receive Rate Outbound % Utilization Outbound Volume Octets Total Number of Octets Sent [103643] Tx Rate [103669] Total Number of Octets Received [103642] Downstream Bandwidth Occupancy[103672] Rx Rate [103670] Upstream Bandwidth Occupancy[103671]

Ethernet Aggregation (LAG) Utilization Summary - DC2KPIs Charts LAG Speed Max Rate [103743]

Card Metrics Card Utilization Summary - GSTKPIs CPU Occupancy[100006] Memory Occupancy[100872]

Card Utilization Summary - RSTKPIs CPU Occupancy[100006] Memory Occupancy[100872]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

13

Chapter 3: Supported reports and KPIs

Card Utilization Summary - DCKPIs Charts CPU Occupancy CPU Occupancy[100006]

Card Utilization Summary - DC2KPIs Charts Memory Occupancy Memory Occupancy[100872]

Frame Metrics Ethernet Throughput Summary - GSTKPIs Total Number of Rx Ucast Packets[100859] Total Number of Rx Multicast Packets[100860] Total Number of Tx Ucast Packets[100862] Total Number of Tx Multicast Packets[100863] Total Number of Rx Broadcast Packets[100861] Total Number of Tx Broadcast Packets[103666]

Ethernet Inbound Health Summary - GSTKPIs Total Number of Rx Discarded Packets[100866] Total Number of Rx Error Packets[100867] Number of Collision Frames[100858] Total Number of Rx UnknownProtos Packets[100868] Total Number of Rx Oversize Packets[100719] Total Number of Rx Fragments[101252] Total Number of Rx CRC Errors[100717] Total Number of Rx Undersize Packets[100718]

14

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Ethernet Outbound Health Summary - GSTKPIs Total Number of Tx Error Packets[100870] Total Number of Tx Discarded Packets[100869]

Ethernet Aggregation (LAG) Statistics Summary - GSTKPIs Total Number of Upstream Discarded Packets[103661] Total Number of Downstream Discarded Packets[103662] Total Number of Packets Received[103645] Total Number of Tx Error Frames[103674] Total Number of Packets Sent[103646] Total Number of Rx Error Frames[103673]

Ethernet Port Traffic Summary - GSTKPIs Total Number of Rx Packets[100846] Total Number of Tx Frames[100578] Current Bandwidth Per Second[103665] Tx Rate[100453] Rx Rate[100454]

Ethernet Throughput Summary - RSTKPIs Total Number of Rx Ucast Packets[100859] Total Number of Rx Multicast Packets[100860] Total Number of Tx Ucast Packets[100862] Total Number of Tx Multicast Packets[100863] Total Number of Rx Broadcast Packets[100861] Total Number of Tx Broadcast Packets[103666]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

15

Chapter 3: Supported reports and KPIs

Ethernet Inbound Health Summary - RSTKPIs Total Number of Rx Discarded Packets[100866] Total Number of Rx Error Packets[100867] Number of Collision Frames[100858] Total Number of Rx UnknownProtos Packets[100868] Total Number of Rx Oversize Packets[100719] Total Number of Rx Fragments[101252] Total Number of Rx CRC Errors[100717] Total Number of Rx Undersize Packets[100718]

Ethernet Outbound Health Summary - RSTKPIs Total Number of Tx Error Packets[100870] Total Number of Tx Discarded Packets[100869]

Ethernet Aggregation (LAG) Statistics Summary - RSTKPIs Total Number of Upstream Discarded Packets[103661] Total Number of Downstream Discarded Packets[103662] Total Number of Packets Received[103645] Total Number of Tx Error Frames[103674] Total Number of Packets Sent[103646] Total Number of Rx Error Frames[103673]

Ethernet Port Traffic Summary - RSTKPIs Total Number of Rx Packets[100846] Total Number of Tx Frames[100578] Current Bandwidth Per Second[103665] Tx Rate[100453] Rx Rate[100454]

16

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Ethernet Throughput Summary - DCKPIs Charts Multicast Inbound Volume Unicast Inbound Volume Broadcast Outbound Volume Broadcast Inbound Volume Unicast Outbound Volume Muliticast Outbound Volume Total Number of Rx Ucast Packets[100859] Total Number of Rx Multicast Packets[100860] Total Number of Tx Ucast Packets[100862] Total Number of Tx Multicast Packets[100863] Total Number of Rx Broadcast Packets[100861] Total Number of Tx Broadcast Packets[103666]

Ethernet Inbound Health Summary - DCKPIs Charts Received Oversize Packets Received Undersize Packets Collision Frames Received CRC Errors Received Fragments Number of Collision Frames[100858] Total Number of Rx Oversize Packets[100719] Total Number of Rx Fragments[101252] Total Number of Rx CRC Errors[100717] Total Number of Rx Undersize Packets[100718]

Ethernet Outbound Health Summary - DCKPIs KPIs Sent Error Packets Sent Discarded Packets Total Number of Tx Error Packets[100870] Total Number of Tx Discarded Packets[100869]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

17

Chapter 3: Supported reports and KPIs

Ethernet Aggregation (LAG) Statistics Summary - DCKPIs Charts Inbound Volume Packets Errors Outbound Discarded Packets Outbound Errors Inbound Discarded Packets Inbound Outbound Volume Packets Total Number of Upstream Discarded Packets[103661] Total Number of Downstream Discarded Packets[103662] Total Number of Packets Received[103645] Total Number of Tx Error Frames[103674] Total Number of Packets Sent[103646] Total Number of Rx Error Frames[103673]

Ethernet Port Traffic Summary - DCKPIs Charts Inbound Volume Packets Total Number of Rx Packets[100846]

Ethernet Inbound Health Summary - DC2KPIs Charts Received Discarded Packets Received Errors Packets Received UnknownProtos Packets Total Number of Rx Discarded Packets[100866] Total Number of Rx Error Packets[100867] Total Number of Rx UnknownProtos Packets[100868]

18

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Ethernet Port Traffic Summary - DC2KPIs Charts Send Rate Outbound Volume Packets Port Speed Receive Rate Total Number of Tx Frames[100578] Current Bandwidth Per Second[103665] Tx Rate[100453] Rx Rate[100454]

IGMP Metrics IGMP Inbound Throughput Summary - GSTKPIs The Number of General Query Packet Received[101263] The Number of Error Report Packet of Version 2 Received[101266] The Number of Report Packet of Version 3 Received[101267] The Number of Specific Query Packet Received[101264] The Number of Report Packet of Version 2 Received[101265] The Number of Error Report Packet of Version 3 Received[101268] The Number of Leave Packet Received[101269] The Number of Invalid Packet Received[101277]

IGMP Outbound Throughput Summary - GSTKPIs The Number of Report Packet of Version 2 Send Out[101272] The Number of Report Packet of Version 3 Send Out[101273] The Number of General Query Packet Send Out[101270] The Number of Specific Query Packet Send Out[101271] The Number of Leave Packet Send Out[101274]

IGMP Multicast Summary - GSTKPIs The Number of Active User in Mvlan[101276] The Number of Active Program in Mvlan[101275]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

19

Chapter 3: Supported reports and KPIs

IGMP Inbound Throughput Summary - RSTKPIs The Number of General Query Packet Received[101263] The Number of Error Report Packet of Version 2 Received[101266] The Number of Report Packet of Version 3 Received[101267] The Number of Specific Query Packet Received[101264] The Number of Report Packet of Version 2 Received[101265] The Number of Error Report Packet of Version 3 Received[101268] The Number of Leave Packet Received[101269] The Number of Invalid Packet Received[101277]

IGMP Outbound Throughput Summary - RSTKPIs The Number of Report Packet of Version 2 Send Out[101272] The Number of Report Packet of Version 3 Send Out[101273] The Number of General Query Packet Send Out[101270] The Number of Specific Query Packet Send Out[101271] The Number of Leave Packet Send Out[101274]

IGMP Multicast Summary - RSTKPIs The Number of Active User in Mvlan[101276] The Number of Active Program in Mvlan[101275]

IGMP Inbound Throughput Summary - DCKPIs The Number of General Query Packet Received[101263] The Number of Error Report Packet of Version 2 Received[101266] The Number of Report Packet of Version 3 Received[101267] The Number of Specific Query Packet Received[101264] The Number of Report Packet of Version 2 Received[101265] The Number of Error Report Packet of Version 3 Received[101268] The Number of Leave Packet Received[101269] The Number of Invalid Packet Received[101277]

20

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Charts Group Specific Queries Received v2 Membership Reports Received v3 Membership Reports Received General Membership Queries Received v2 Errored Reports Received Errored IGMP Messages Received v2/v3 Leaves Received v3 Errored Reports Received

IGMP Outbound Throughput Summary - DCKPIs Charts v2 Membership Reports Sent v2/v3 Leaves Sent Group Specific Queries Sent General Membership Queries Sent v3 Membership Reports Sent The Number of Report Packet of Version 2 Send Out[101272] The Number of Report Packet of Version 3 Send Out[101273] The Number of General Query Packet Send Out[101270] The Number of Specific Query Packet Send Out[101271] The Number of Leave Packet Send Out[101274]

IGMP Multicast Summary - DCKPIs Charts Active Multicast Users Active Multicast Groups The Number of Active User in Mvlan[101276] The Number of Active Program in Mvlan[101275]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

21

Chapter 3: Supported reports and KPIs

Line Metrics ATUC Line Health Summary - GSTKPIs Count of ATU-C Loss of Link seconds[101175] Count of ATU-C Errored Seconds[100544] Count of ATU-C Fast Retrain Times[100678] Count of ATU-C Loss of Power Failures[101176] Count of ATU-C Line Initialization Attempts[100540] Count of ATU-C Unavailable Seconds[100681] Count of ATU-C Failed Fast Retrain Times[100679] Count of ATU-C Severely Errored Seconds(SES)[100680] Count of ATU-C Loss of Framing Failures[100542] Count of ATU-C Loss of Signal Failures[100543]

ATUR Line Health Summary - GSTKPIs Count of ATU-R Loss of Power Failures[100547] Count of ATU-R Errored Seconds[100548] Count of ATU-R Severely Errored Seconds(SES)[100682] Count of ATU-R Unavailable Seconds[100683] Count of ATU-R Loss of Framing Failures[100545] Count of ATU-R Loss of Signal Failures[100546]

ATUC Channel Throughput Summary - GSTKPIs Count of ATU-C Rx Encoded Blocks[101177] Count of ATU-C Tx Encoded Blocks[101178] Count of ATU-C Rx Blocks with Correctable Errors[101179] Count of ATU-C Rx blocks with Uncorrectable Errors[101180]

ATUR Channel Throughput Summary - GSTKPIs Count of ATU-R Rx Blocks with Uncorrectable Errors[101185] Count of ATU-R Rx Blocks with Correctable Errors[101184] Count of ATU-R Rx Encoded Blocks[101182] Count of ATU-R Tx Encoded Blocks[101183]

22

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

ATUC Line Health Summary - RSTKPIs Count of ATU-C Loss of Link seconds[101175] Count of ATU-C Errored Seconds[100544] Count of ATU-C Fast Retrain Times[100678] Count of ATU-C Loss of Power Failures[101176] Count of ATU-C Line Initialization Attempts[100540] Count of ATU-C Unavailable Seconds[100681] Count of ATU-C Failed Fast Retrain Times[100679] Count of ATU-C Severely Errored Seconds(SES)[100680] Count of ATU-C Loss of Framing Failures[100542] Count of ATU-C Loss of Signal Failures[100543]

ATUR Line Health Summary - RSTKPIs Count of ATU-R Loss of Power Failures[100547] Count of ATU-R Errored Seconds[100548] Count of ATU-R Severely Errored Seconds(SES)[100682] Count of ATU-R Unavailable Seconds[100683] Count of ATU-R Loss of Framing Failures[100545] Count of ATU-R Loss of Signal Failures[100546]

ATUC Channel Throughput Summary - RSTKPIs Count of ATU-C Rx Encoded Blocks[101177] Count of ATU-C Tx Encoded Blocks[101178] Count of ATU-C Rx Blocks with Correctable Errors[101179] Count of ATU-C Rx blocks with Uncorrectable Errors[101180]

ATUR Channel Throughput Summary - RSTKPIs Count of ATU-R Rx Blocks with Uncorrectable Errors[101185] Count of ATU-R Rx Blocks with Correctable Errors[101184] Count of ATU-R Rx Encoded Blocks[101182] Count of ATU-R Tx Encoded Blocks[101183]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

23

Chapter 3: Supported reports and KPIs

ATUC Line Health Summary - DCKPIs Charts Loss of Power Failures Loss of Link seconds Errored Seconds Line Initialization Attempts Loss of Signal Failures Loss of Framing Failures Count of ATU-C Loss of Link seconds[101175] Count of ATU-C Errored Seconds[100544] Count of ATU-C Loss of Power Failures[101176] Count of ATU-C Line Initialization Attempts[100540] Count of ATU-C Loss of Framing Failures[100542] Count of ATU-C Loss of Signal Failures[100543]

ATUC Line Health Summary - DC2KPIs Charts Severely Errored Seconds(SES) Fast Retrain Times Unavailable Seconds Failed Fast Retrain Times Count of ATU-C Fast Retrain Times[100678] Count of ATU-C Unavailable Seconds[100681] Count of ATU-C Failed Fast Retrain Times[100679] Count of ATU-C Severely Errored Seconds(SES)[100680]

ATUR Line Health Summary - DCKPIs Count of ATU-R Loss of Power Failures[100547] Count of ATU-R Errored Seconds[100548] Count of ATU-R Loss of Framing Failures[100545] Count of ATU-R Loss of Signal Failures[100546]

24

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Charts Errored Seconds Loss of Power Failures Loss of Signal Failures Loss of Framing Failures

ATUC Channel Throughput Summary - DCKPIs Charts Received Encoded Blocks Received Blocks with Uncorrectable Errors Received Blocks with Correctable Errors Sent Encoded Blocks Count of ATU-C Rx Encoded Blocks[101177] Count of ATU-C Tx Encoded Blocks[101178] Count of ATU-C Rx Blocks with Correctable Errors[101179] Count of ATU-C Rx blocks with Uncorrectable Errors[101180]

ATUR Channel Throughput Summary - RSTKPIs Charts Received locks with Uncorrectable Errors Received Blocks with Correctable Errors Sent Encoded Blocks Received Encoded Blocks Count of ATU-R Rx Blocks with Uncorrectable Errors[101185] Count of ATU-R Rx Blocks with Correctable Errors[101184] Count of ATU-R Rx Encoded Blocks[101182] Count of ATU-R Tx Encoded Blocks[101183]

ATUR Line Health Summary - DC2KPIs Charts Unavailable Seconds Severely Errored Seconds(SES) Count of ATU-R Severely Errored Seconds(SES)[100682] Count of ATU-R Unavailable Seconds[100683]

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

25

Chapter 3: Supported reports and KPIs

Key performance indicatorsTable 2 lists all of the key performance indicators (KPIs) supported by the Huawei U2000 DSLAM Technology Pack. Table 2: Key performance indicatorsKPI Comment

CPU Occupancy[100006] Count of ATU-C Errored Seconds[100544] Count of ATU-C Failed Fast Retrain Times[100679] Count of ATU-C Fast Retrain Times[100678] Count of ATU-C Line Initialization Attempts[100540] Count of ATU-C Loss of Framing Failures[100542] Count of ATU-C Loss of Link Seconds[101175] Count of ATU-C Loss of Power Failures[101176] Count of ATU-C Loss of Signal Failures[100543] Count of ATU-C Rx Blocks with Correctable Errors[101179] Count of ATU-C Rx Encoded Blocks[101177] Count of ATU-C Rx blocks with Uncorrectable Errors[101180] Count of ATU-C Severely Errored Seconds(SES)[100680] Count of ATU-C Tx Encoded Blocks[101178] Count of ATU-C Unavailable Seconds[100681] Count of ATU-R Errored Seconds[100548] Count of ATU-R Loss of Framing Failures[100545]

CPU usage rate A one-second period with one or more errored blocks in ATU-C Count of ATU-C Failed Fast Retrain Times Count of ATU-C Fast Retrain Times Count of ATU-C Line Initialization Attempts Count of ATU-C Loss of Framing Failures Number of seconds of ATU-C Loss of Link Count of ATU-C Loss of Power Failures Count of ATU-C Loss of Signal Failures Count of ATU-C Received Blocks with Correctable Errors Count of ATU-C Received Encoded Blocks Count of ATU-C Received blocks with Uncorrectable Errors A one-second period that contains >30% errored blocks in ATU-C Count of ATU-C Transmitted Encoded Blocks The number of seconds for which the ATU-C interface is unavailable A one-second period with one or more errored blocks in ATU-R Count of ATU-R Loss of Framing Failures

26

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Table 2: Key performance indicatorsKPI Comment

Count of ATU-R Loss of Power Failures[100547] Count of ATU-R Loss of Signal Failures[100546] Count of ATU-R Rx Blocks with Correctable Errors[101184] Count of ATU-R Rx Blocks with Uncorrectable Errors[101185] Count of ATU-R Rx Encoded Blocks[101182] Count of ATU-R Severely Errored Seconds(SES)[100682] Count of ATU-R Tx Encoded Blocks[101183] Count of ATU-R Unavailable Seconds[100683] Current Bandwidth Per Second[103665] Downstream Bandwidth Occupancy [101187] Downstream Bandwidth Occupancy[103672] Downstream Octets to PPP [100810] Max Rate[103743] Memory Occupancy[100872] Number of Collision Frames[100858] Rx Bandwidth Occupancy [100458] Rx Rate [103670] Rx Rate[100454] The Number of Active Program in Mvlan[101275] The Number of Active User in Mvlan[101276] The Number of Error Report Packet of Version 2 Received[101266]

Count of ATU-R Loss of Power Failures Count of ATU-R Loss of Signal Failures Count of ATU-R Received Blocks with Correctable Errors Count of ATU-R Received Blocks with Uncorrectable Errors Count of ATU-R Received Encoded Blocks A one-second period that contains >30% errored blocks in ATU-R Count of ATU-R Transmitted Encoded Blocks The number of seconds for which the ATU-R interface is unavailable Port Speed Downstream bandwidth usage rate Downstream Bandwidth Occupancy Downstream Octets to PPP Aggregation speed of all ethernet ports in Link Aggregation Group (LAG) Memory usage rate Number of Collision Frames Transmitted Bandwidth Occupancy Received Rate Received Rate The Number of Active Multicast Groups The Number of Active Multicast Users The Number of v2 Errored Reports Received

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

27

Chapter 3: Supported reports and KPIs

Table 2: Key performance indicatorsKPI Comment

The Number of Error Report Packet of Version 3 Received[101268] The Number of General Query Packet Received[101263] The Number of General Query Packet Send Out[101270] The Number of Invalid Packet Received[101277] The Number of Leave Packet Received[101269] The Number of Leave Packet Send Out[101274] The Number of Report Packet of Version 2 Received[101265] The Number of Report Packet of Version 2 Send Out[101272] The Number of Report Packet of Version 3 Received[101267] The Number of Report Packet of Version 3 Send Out[101273] The Number of Specific Query Packet Received[101264] The Number of Specific Query Packet Send Out[101271] Total Number of Downstream Discarded Packets[103662] Total Number of Downstream Octets [100560] Total Number of Octets Received [103642] Total Number of Octets Sent [103643] Total Number of Packets Received[103645] Total Number of Packets Sent[103646] Total Number of Rx Broadcast Packets[100861] Total Number of Rx CRC Errors[100717]

The Number of v3 Errored Reports Received The Number of General Membership Queries Received The Number of General Membership Queries Sent The Number of Errored IGMP Messages Received The Number of v2/v3 Leaves Received The Number of v2/v3 Leaves Sent The Number of v2 Membership Reports Received The Number of v2 Membership Reports Sent The Number of v3 Membership Reports Received The Number of v3 Membership Reports Sent The Number of Group Specific Queries Received The Number of Group Specific Queries Sent Total Number of Downstream Discarded Packets Total Number of Downstream Octets Total Number of Octets Received Total Number of Octets Sent Total Number of Packets Received Total Number of Packets Sent Total Number of Received Broadcast Packets Total Number of Received CRC Errors

28

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 3: Supported reports and KPIs

Table 2: Key performance indicatorsKPI Comment

Total Number of Rx Discarded Packets[100866] Total Number of Rx Error Frames[103673] Total Number of Rx Error Packets[100867] Total Number of Rx Fragments[101252] Total Number of Rx Multicast Packets[100860] Total Number of Rx Octets [100456] Total Number of Rx Oversize Packets[100719] Total Number of Rx Packets[100846] Total Number of Rx Ucast Packets[100859] Total Number of Rx Undersize Packets[100718] Total Number of Rx UnknownProtos Packets[100868] Total Number of Tx Broadcast Packets[103666] Total Number of Tx Discarded Packets[100869] Total Number of Tx Error Frames[103674] Total Number of Tx Error Packets[100870] Total Number of Tx Frames[100578] Total Number of Tx Multicast Packets[100863] Total Number of Tx Octets [100455] Total Number of Tx Ucast Packets[100862] Total Number of Upstream Discarded Packets[103661]

Total Number of Received Discarded Packets Total Number of Received Error Frames Total Number of Received Error Packets Total Number of Received Fragments Total Number of Received Multicast Packets Total Number of Transmitted Octets Total Number of Received Oversize Packets Total Number of Received Packets Total Number of Received Unicast Packets Total Number of Received Undersize Packets Total Number of Received Unknown Protocols Packets Total Number of Transmitted Broadcast Packets Total Number of Transmitted Discarded Packets Total Number of Transmitted Error Frames Total Number of Transmitted Error Packets Total Number of Transmitted Frames Total Number of Transmitted Multicast Packets Total Number of Received Octets Total Number of Transmitted Unicast Packets Total Number of Upstream Discarded Packets

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

29

Chapter 3: Supported reports and KPIs

Table 2: Key performance indicatorsKPI Comment

Total Number of Upstream Octets [100559] Tx Bandwidth Occupancy [100457] Tx Rate [103669] Tx Rate[100453] Upstream Bandwidth Occupancy [101186] Upstream Bandwidth Occupancy[103671] Upstream Octets from PPP [100809] VLAN DownStream Account of Network Interface by Packet[102136] VLAN Downflow Account by Byte[100839] VLAN Downflow Account by Packet[100843] VLAN UpStream Account of Network Interface by Packet[102135] VLAN Upflow Account by Byte[100838] VLAN Upflow Account by Packet[100842]

Total Number of Upstream Octets Received Bandwidth Occupancy Transmitted Rate Transmitted Rate Upstream bandwidth usage rate Upstream Bandwidth Occupancy Upstream Octets from PPP VLAN DownStream Account of Network Interface by Packet During Collection Period VLAN Downflow Account by Byte VLAN Downflow Account by Packet VLAN UpStream Account of Network Interface by Packet During Collection Period VLAN Upflow Account by Byte VLAN Upflow Account by Packet

30

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

This chapter explains how to configure the Huawei U2000 DSLAM Technology Pack and consists of the following topics:Topic Overview Before you begin Configure the technology pack Page 31 31 32

OverviewThe Huawei U2000 DSLAM Technology Pack is a bulk or Universal Bulk Adaptor (UBA) technology pack. Bulk technology packs collect data against non-SNMP devices, and rely on the UBA of the Tivoli Netcool Performance Manager DataChannel to process the data. Prior to Tivoli Netcool Performance Manager version 4.4.3, bulk packs could be very difficult to configure, and in many cases required extensive Tivoli Netcool Performance Manager domain knowledge. Tivoli Netcool Performance Manager version 4.4.3 introduced a GUI to configure Tivoli Netcool Performance Manager UBA technology packs on supported Tivoli Netcool Performance Manager platforms.

Before you beginBefore configuring the Huawei U2000 DSLAM Technology Pack, ensure that you: Have the following software and documentation for your version of Tivoli Netcool Performance Manager: IBM Tivoli Netcool Performance Manager Technology Pack Release Notes for the current technology pack release IBM Tivoli Netcool/Proviso Installation Guide IBM Tivoli Netcool Performance Manager Technology Pack Installation Guide IBM Tivoli Netcool/Proviso Upgrade Guide (if you are upgrading the core software) IBM Tivoli Netcool Performance Manager Technology Pack Upgrade Guide (if you are upgrading the technologypack software) IBM Tivoli Netcool/Proviso DataMart Configuration Guide Important: Refer to this guide to run a bulk inventory profile. Access to the Tivoli Netcool Performance Manager DataMart server An X Window server on the DataMart server

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

31

Chapter 4: Configuring the technology pack

Note: (Tivoli Netcool Performance Manager pre-v4.4.3) If there is no graphics card on the DataMart server, you can install the Xvfb virtual frame buffer package to provide X Window services, as described in the IBM Tivoli Netcool/Proviso Installation Guide. Access to the SilverStream server. Access to the DataChannel server. Have completed the following tasks: Reviewed the release notes for the current technology pack. Important: Release notes contain important information you need to consider before installing a technology pack. They also contain information on specific patches that need to be installed before you configure a technology pack. Installed the current version of the Tivoli Netcool Performance Manager components, as described in the IBM Tivoli Netcool/Proviso Installation Guide. Installed the Huawei U2000 DSLAM Technology Pack. Note: Installation instructions for a technology pack can be found in the Appendices of the IBM Tivoli Netcool Performance Manager Technology Pack Installation Guide. Upgrade instructions for a technology pack can be found in Chapter 3 of the IBM Tivoli Netcool Performance Manager Technology Pack Upgrade Guide. Localization is done automatically during installation of the technology pack. Configured at least one DataChannel. Configured a UBA bulk collector subchannel. Created a user on the Huawei U2000 server with permission to ftp and delete files.

Configure the technology packTo configure the Huawei U2000 DSLAM Technology Pack, follow these steps: 1. Load the DataMart environment. To load the shell with the DataMart environment, follow these steps: 1-a. Log in to the DataMart server as pvuser. 1-b. Change your working directory to the DataMart home directory (/opt/datamart, by default), using the following command:cd /opt/datamart

1-c. Load the shell with the DataMart environment, by sourcing the dataMart.env file, as follows:. /opt/datamart/dataMart.env

Note: After you load the DataMart environment into the shell, the PVMHOME variable is set to the DataMart home directory, /opt/datamart by default. These instructions assume that this variable has been set. 2. Copy technology-specific files from the DataMart server to the DataChannel server. Technology-specific files are used to associate a UBA technology pack with a specific instance of the UBA.

32

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

Note: While it is possible to install DataMart and DataChannel on the same server, in a typical installation these modules are installed on separate servers. If this is the case, use ftp to copy the technology-specific files. Otherwise, if DataMart and DataChannel are on the same server, use the cp command to copy the files to the appropriate DataChannel directory. To copy technology-specific files to the DataChannel server, follow these steps: 2-a. Log in to the Tivoli Netcool Performance Manager DataChannel server by entering the user name and password that you specified when installing and configuring a DataChannel. The default user name and password are pvuser and PV, respectively. 2-b. Change your working directory to the DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam directory by entering the following command, replacing DATA_CHANNEL_HOME with the DataChannel home directory (/opt/datachannel, by default):$ cd DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam

2-c. Using the ftp utility in text mode, log into the DataMart server using the appropriate user name and password (pvuser and PV, by default). 2-d. Using the cd subcommand, change your working directory to the$PVMHOME/APFiles/huawei_u2000_dslam/datachannel/scripts/huawei_u2000_dsl am directory.

2-e. Using the get subcommand, copy the bulk adapter design files (*.js), scripts (if any), and other files (if any) from the DataMart server to the DataChannel server. 2-f. (Tivoli Netcool Performance Manager pre-v4.4.3 only) Copy the huawei_u2000_dslam_sample_dc.cfg template file as follows: Using the cd subcommand, change your working directory to the$PVMHOME/APFiles/huawei_u2000_dslam/datachannel/conf directory.

Using the get subcommand, copy the huawei_u2000_dslam_sample_dc.cfg template file from the DataMart server to the DataChannel server. 2-g. Exit the ftp utility by entering the bye subcommand. 2-h. Verify that the technology-specific files are now located in the target directory as follows: (Tivoli Netcool Performance Manager v4.4.3 and later) Verify that the bulk adapter design files (*.js), scripts (if any), other files (if any) are now located in the DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam directory. (Tivoli Netcool Performance Manager pre-v4.4.3 only) Verify that the bulk adapter design files (*.js), scripts (if any), other files (if any), and huawei_u2000_dslam_sample_dc.cfg template file are now located in the DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam directory. 3. Activate data collection requests. During installation of the technology pack, all predefined data collection requests are promoted to the database and set to inactive (that is, idle displays in the Active column of the Tivoli Netcool Performance Manager DataMart Request Editor). You need to activate these predefined data collection requests using the Request Editor. To set data collection requests to active, follow these steps: 3-a. Change your working directory to $PVMHOME/bin (/opt/datamart/bin, by default) on the DataMart server. 3-b. Invoke the DataMart GUI by entering the following command and pressing Enter:pvm

3-c. Click the Configuration tab, then click Request Editor to open the Request Editor. 3-d. Click the Collection tab. 3-e. Click Refresh.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

33

Chapter 4: Configuring the technology pack

The predefined data collection requests are loaded into the Request Editor from the database. 3-f. Click the Inactive button in the Filter group box to display only idle requests. 3-g. In the Sub-Element Groups pane, select all idle data collection requests in the following group or groups:Root->Sub-Element Collect->Huawei U2000->DSLAM

3-h. Click the Active box under Details. The Request Editor toggles the idle setting for these data collection requests from idle to active in the Active column. 3-i. Click Save. 4. Edit pack-specific UBA parameters, based on the following Tivoli Netcool Performance Manager platforms: Tivoli Netcool Performance Manager v4.4.3 and later Tivoli Netcool Performance Manager pre-v4.4.3 Tivoli Netcool Performance Manager v4.4.3 and later In this release of Tivoli Netcool Performance Manager, you were instructed to modify the technology packspecific UBA parameters when you installed the Huawei U2000 DSLAM Technology Pack, using the Topology Editor. If you did not modify the UBA parameters with site-specific values or you want to make additional edits, you can do so now. Otherwise, you can go to the next step. See the IBM Tivoli Netcool Performance Manager Technology Pack Installation Guide for more information. Tivoli Netcool Performance Manager pre-v4.4.3 The Huawei U2000 DSLAM Technology Pack requires specific UBA parameters that are not in the dc.cfg file. The DataChannel installer creates a dc.cfg file in the DATA_CHANNEL_HOME/conf directory (/opt/datachannel/conf, by default). These pack-specific parameters were delivered in a template file called huawei_u2000_dslam_sample_dc.cfg. The best practice on adding these pack-specific parameters to the dc.cfg file is to: Edit the pack-specific UBA parameters in the template file with site-specific values. Manually add them to the dc.cfg file. To edit the pack-specific UBA parameters in the template file with site-specific values, follow these steps: 4-a. On the DataChannel server, change your working directory to the DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam directory by entering the following command, replacing DATA_CHANNEL_HOME with the DataChannel home directory (/opt/datachannel, by default):cd DATA_CHANNEL_HOME/scripts/huawei_u2000_dslam

4-b. Make a backup copy of the huawei_u2000_dslam_sample_dc.cfg template file, by entering the following command:cp huawei_u2000_dslam_sample_dc.cfg huawei_u2000_dslam_sample_dc.cfg.ORIG

4-c. In a text editor, open the huawei_u2000_dslam_sample_dc.cfg template file for editing. 4-d. Edit the pack-specific UBA parameters according to the instructions provided in Appendix B, Template file (Tivoli Netcool Performance Manager pre-v4.4.3 only). 4-e. When you are satisfied with your edits, write (but do not quit) the huawei_u2000_dslam_sample_dc.cfg template file. Important: Editing the dc.cfg file is a nontrivial task and prone to error. Take your time and check your work carefully.

34

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

To manually add the pack-specific UBA parameters to the dc.cfg file, follow these steps: 4-f. Open a second terminal emulator. 4-g. On the DataChannel server, change your working directory to the DATA_CHANNEL_HOME/conf directory (/opt/datachannel/conf, by default), by entering the following command:cd DATA_CHANNEL_HOME/conf

4-h. Make a backup copy of the dc.cfg file, by entering the following command:cp dc.cfg dc.cfg.ORIG

4-i. In a text editor, open the dc.cfg file for editing. 4-j. Search for the UBA parameters, which begin with the string UBA. These parameters were written to the dc.cfg file when you configured the UBA bulk collector and installed the DataChannel configuration, as described in the IBM Tivoli Netcool Performance Manager Technology Pack Installation Guide. 4-k. Copy the pack-specific UBA parameters from the huawei_u2000_dslam_sample_dc.cfg template file to the dc.cfg file. 4-l. When you are satisfied with your edits, do the following tasks: Quit the huawei_u2000_dslam_sample_dc.cfg template file. Write and quit the dc.cfg file. 5. Load the DataChannel environment. In subsequent steps, you will execute dccmd commands. To ensure that you can run these commands, load the shell with the DataChannel environment by following these steps: 5-a. Log in to the DataChannel server as pvuser. 5-b. Change your working directory to the DataChannel home directory (/opt/datachannel, by default), using the following command:cd /opt/datachannel

5-c. Load the shell with the DataChannel environment, by sourcing the dataChannel.env file, as follows:. /opt/datachannel/dataChannel.env

6.

Restart the DataChannel to activate the UBA and read in changes to the deployed topology (v4.4.3 and later) or dc.cfg (pre-v4.4.3 only). 6-a. Open a terminal emulator on the DataChannel server. 6-b. Use the dccmd command to stop all DataChannel applications:dccmd -action stop all

6-c. Use the dccmd command to release all daemons running in the DataChannel:dccmd -action forget all

6-d. Use the following command to find the process identifiers (pids) associated with the DataChannel visual processes:DATA_CHANNEL_HOME/bin/findvisual

where:DATA_CHANNEL_HOME is /opt/datachannel, by default.

6-e. Use the following commands to stop each DataChannel visual process:kill -9 kill -9

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

35

Chapter 4: Configuring the technology pack

kill -9 kill -9

6-f. Use the following commands to restart each DataChannel visual process:cnsw logw amgrw cmgrw

6-g. Use the dccmd command to start all DataChannel applications:dccmd -action start all

6-h. Use the dccmd command to verify that all of the DataChannel applications started properly:dccmd -action status all

More specifically, make sure that the UBA application associated with the DataChannel you configured for the Huawei U2000 DSLAM Technology Pack is running. 6-i. Watch the output of the status switch to verify that all the necessary processes are running. If these processes are running, run the tail utility on the log file for the UBA by issuing a command similar to the following example:tail -f DATA_CHANNEL_HOME/log/proviso.log | grep UBA..- | more

where:Variable Meaning Is /opt/datachannel, by default. Specifies the channel number (for example, 1) you specified when configuring this DataChannel. Specifies the collector number (for example, 100) you specified when configuring this UBA bulk collector. Removes extraneous log messages from your view. That is, the trailing dash guarantees that the command displays only those messages generated by your application. The first set of messages relate to syntax checks.

DATA_CHANNEL_HOME The trailing dash () after

The following table identifies some events to watch for during the syntax check:Event The UBA application starts successfully, but then stops executing. The bulk adapter design file might be corrupt. Meaning Typically, this event occurs because of a licensing issue. This event causes a syntax error before the UBA application connects to the database.

36

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

Event The UBA application connects to the database.

Meaning This event causes a message similar to the following example to display: DB_CONNECT Connecting to as If you see this database connection message without prior errors, the UBA application has passed the syntax check.

7.

Ensure that the bulk input files can be read. To verify that the UBA application can read the bulk input files, follow these steps: 7-a. Place a bulk input file at the source input location. (Tivoli Netcool Performance Manager v4.4.3 and later) The source input location for bulk input files is specified using the URI parameter from the pack XSD file, which you can view using the Topology Editor. (Tivoli Netcool Performance Manager pre-v4.4.3 only) The source input location for bulk input files is specified using the URI parameter from the template file, which you added to the dc.cfg file in a previous step. Within the configured file retrieval interval (typically, five minutes), the UBA application retrieves the bulk input file and copies it to the following directory:

DATA_CHANNEL_HOME/UBA..//do/

where:Variable Meaning Is /opt/datachannel, by default. Specifies the channel number (for example, 1) that you specified when configuring this DataChannel. Specifies the collector number (for example, 100) that you specified when configuring this UBA bulk collector. Specifies the string for the INSTANCES parameter in the pack XSD file. Typically, this string represents the name of the pack and is read-only. You can view the string specified for INSTANCES by using the Topology Editor. Specifies the string for the INSTANCES parameter in the pack template file. You were instructed to copy this parameter to the dc.cfg file in a previous step.

DATA_CHANNEL_HOME (Tivoli Netcool Performance Manager v4.4.3 and later)

(Tivoli Netcool Performance Manager prev4.4.3 only)

The UBA application then processes the bulk input file according to the instructions in the bulk adapter design file. Note: The first time that the UBA processes a bulk input file, it passes a metric to the CME. The CME rejects this metric as a BAD_METRIC because the metric does not have an associated grouped subelement prior to the time this metric is recorded. This is expected behavior. The CME accepts metrics from the bulk input files after the inventory is run.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

37

Chapter 4: Configuring the technology pack

7-b. Ensure that the UBA application can successfully read the bulk input file that you copied into the source input location, by issuing a tail command similar to the following example:tail -f DATA_CHANNEL_HOME/log/proviso.log | grep UBA..- | more

The following table identifies the success messages that you should look for.

Success messagePERF_INPUT_PROCESSING Processed records in seconds ( records/minute): records

Meaning Specifies a bulk adapter design file completion message. A bulk adapter design file successfully completes when an informational message similar to this one displays in the log file. Success occurs when records equals 0.

METRIC_STREAM_INFO Completed writing metric output: DATA_CHANNEL_HOME/UBA../streamin g/ state/temp/output/..NRAW.BOF; wrote metrics; bad resource IDs; bad formula names (#())

Specifies a metric creation success message. The UBA application successfully creates metrics when a debug 2 message similar to this one displays in the log file. For some technology packs, the metric creation may be done across different instances of UBA applications. Success occurs when metrics is greater than one, bad resource IDs equals 0, and bad formula names equals 0.

PERF_INVFLUSH Inserted/updated inventory objects in seconds

Specifies an inventory success message. The inventory successfully completes when an informational message similar to this one displays in the log file. If is greater than one, the UBA application created or updated at least one subelement, and the inventory process is successful. The log file might record further details (if necessary) in the messages associated with the PERF_INVFLUSHPV subelement message category.

8.

Run the bulk inventory profile. The UBA application handles the inventory and metrics according to the instructions provided in the technology pack design file or files. The UBA application inserts the created elements, subelements, and metrics into the database. However, the UBA application does not handle the grouping of these elements and subelements. To handle the grouping of the elements and subelements that were inserted into the database, UBA technology packs supply a bulk inventory profile. This bulk inventory profile is automatically created when the pack is installed. Bulk inventory profiles use the following name syntax:bulk_N

38

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

where:Syntax item bulk_ N Meaning Identifies this as a bulk inventory profile for a UBA technology pack. Specifies the collector number (for example, 100) the user specified when configuring this UBA bulk collector.

You must use the Inventory Tool to run a bulk inventory profile. To run the bulk inventory profile for this technology pack, perform the following steps: 8-a. In the command window where you loaded the DataMart environment, change your working directory to $PVMHOME/bin (/opt/datamart/bin, by default) on the DataMart server. 8-b. Invoke the DataMart GUI by entering the following command and pressing Enter:pvm

8-c. Click Inventory Tool in the Resource tab. The Inventory Tool window appears. This window displays a list of the existing inventory profiles on the Configuration tab. The name of the inventory profile to run is bulk_N, where N is the collector number configured for this pack. 8-d. On the Configuration tab, click on the bulk inventory profile for this technology pack and then select Run Profile from the Action menu. The Live Information tab displays messages about the status of the profile. See the IBM Tivoli Netcool/Proviso DataMart Configuration Guide for more information about running an inventory profile. 8-e. (Optional) Every time the UBA technology pack design file creates new elements, subelements, and metrics, you must perform the previous steps to group the elements and subelements. One way to accomplish this task on a regular basis is to create a cron entry that makes use of the inventory CLI command. The following example shows a cron entry that periodically performs the grouping operation for a bulk inventory profile called bulk_100:0 * * * * . /opt/datamart/dataMart.env && inventory -name bulk_100 -action pregrouping -reload -noX 0 * * * * . /opt/datamart/dataMart.env && inventory -name bulk_100 -action grouping -reload -noX

See the IBM Tivoli Netcool/Proviso Command Line Interface Guide for more information about the inventory command. 9. Deploy reports. After the technology pack installation completes, the rules for the new device are automatically loaded into the database. The inventory process uses those rules to group elements and subelements. You must manually deploy (auto-group) the reports by associating them with groups in the NOC Reporting tree in the DataMart Resource Editor. To deploy the Huawei U2000 DSLAM Technology Pack reports, follow these steps: 9-a. Open the Tivoli Netcool Performance Manager DataMart Resource Editor. 9-b. Click the ReportSEGroup tab. 9-c. Move the cursor to the left pane and scroll up to select any group under the SUB-ELEMENTS->NOC Reporting tree. 9-d. Right-click and select the AutoGrouping option from the menu. The AutoGrouping option places the reports in dynamically generated groups created during inventory. 9-e. Click Yes to continue.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

39

Chapter 4: Configuring the technology pack

9-f. Click Close to exit the message box, or click Details to view a description of any errors. 9-g. Optional: You can also deploy reports on a regular basis by creating a cron entry that makes use of the inventory CLI command and the -reportGrouping option. This option instructs the inventory command to run the report grouping rules and update the deployed reports stored in the database. Report grouping rules must first have been created before this option can be used. For information on creating report grouping rules, see the IBM Tivoli Netcool/Proviso DataMart Configuration Guide. The following example shows a cron entry that periodically performs the deploy report operation:0 * * * * . /opt/datamart/dataMart.env && inventory -noX -reportGrouping

See the IBM Tivoli Netcool/Proviso Command Line Interface Guide for more information about the inventory command.

Verifying resourcesUse the Tivoli Netcool Performance Manager DataMart Resource Editor to determine whether the technology pack resources (elements, subelements, properties, and so on) were successfully discovered and created in the database during inventory. See the IBM Tivoli Netcool/Proviso DataMart Configuration Guide for information about using the Tivoli Netcool Performance Manager DataMart Resource Editor.

Configuring the UBAThere are 16 Indicator Group IDs that the UBA processes. A particular Indicator Group ID can be specified, based on the environment, and processed. The config_schema.js script is located inDATA_CHANNEL_HOME/scripts/huawei_u2000_dslam

Note: DATA_CHANNEL_HOME is the DataChannel home directory (/opt/datachannel, by default). The config_schema.js script can be modified as follows: To enable the UBA to process a particular Indicator Group ID, uncomment the lines with Indicator Group ID by removing // at beginning of the line. To disable the UBA to process a particular Indicator Group ID, comment the lines with Indicator Group ID by adding // to the beginning of the line. To enable UBA to pick up and process XML configuration file, sethas_XML_config = true;

To disable UBA to pick up and process XML configuration file, sethas_XML_config = false;

Note: Any changes to config_schema.js will require the affected DataChannel component to be bounced in order for the changes to take effect.

40

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Chapter 4: Configuring the technology pack

Configuring generate_config.pl.A script generate_config.pl is required if there is an xml configuration file (generated by EMS server) for the resources property LAG name. The xml configuration file will be collected by the UBA to present in the report. The generate_config.pl script is located in$PVMHOME/APFiles/huawei_u2000_dslam/datamart/XML_config_generator

Note: After you load the DataMart environment into the shell, the PVMHOME variable is set to the DataMart home directory, /opt/datamart by default.

Modify generate_config.pl.1. 2. 3. 4. Set the , to the device model. It is possible to add more models if there are more than 2 models running in the environment. Set the to the device timezone. Set the to the directory where the xml configuration file is generated by the EMS server. Set the to the directory where the xml configuration file is generated by generate_config.pl. This is the location where the UBA will collect the xml configuration file.

Adding cronjob to generate XML configuration file.Modify the generate_config_crontab.txt as follows: 1. 2. 3. Set the to the directory where the generate_config.pl is located. Set the to the directory where the XML configuration file is generated by generate_config.pl. Copy both lines into the server cronjob.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

41

Chapter 4: Configuring the technology pack

NOTES

42

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

This appendix provides UNIX reference pages for each of the pack-specific UBA parameters supplied with the XSD file for the Huawei U2000 DSLAM Technology Pack. The descriptions are the same as those that display in the Topology Editor Help. These reference pages are provided for convenience.

OverviewThe following pages provide a reference for the UBA parameters that this technology pack provides. The reference pages have the following sections: Parameter name. Each reference page begins with the parameter name, using the following syntax: [device.][instance.][schema.]parameter_name where: device specifies the name of the device. instance specifies the group alias, typically a string that represents the name of the technology pack. schema specifies the string passed to the input schema object referenced in the bulk adaptor design file. parameter_name specifies the name of the parameter. In the Detail sections of the reference pages, parameter names in the descriptions are typically referenced as schema.parameter_name or simply parameter_name. The descriptions do not reference the device or instance part of the parameter name. Description. A short description that identifies the purpose of the parameter. Component. The DataChannel application or component to which the parameter applies. The value specified for this parameter controls the behavior of this DataChannel application. This section can contain the following values: BLB specifies the DataChannel BLB (Bulk Load Balancer) application. IF specifies the DataChannel Inventory File (IF) application. Examples of IF applications include: SAMIF specifies the IF application for the Alcatel-Lucent 5620 SAM Technology Pack. QCIF specifies the IF application for the Alcatel-Lucent 5620 NM Technology Pack. CWMIF specifies the IF application for the Cisco CWM Technology Pack. UBA specifies the DataChannel UBA application. Most UBA technology packs operate with only the UBA application. Value. Specifies the following information: Default identifies the default value, if one is specified, for the parameter. Attribute specifies whether the parameter is writable. Location specifies the location of the parameter in the Topology Editor. Detail. Provides details about the parameter, including possible values.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

43

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.DESIGNFILEDescriptionJavaScript file that controls UBA

ComponentUBA

ValueDefault: Attribute: Location: huawei_u2000_dslam/adaptor.js Read-only Properties tab

DetailTivoli Netcool/Proviso technology packs control the behavior of the DataChannel UBA application through instructions contained in bulk adapter design (JavaScript) files. The DESIGNFILE parameter identifies the name of a technology pack design file. This is a read-only parameter. You cannot change the name of the technology pack bulk adapter design file.

44

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.DSLAM_CONFIG.DELETEONACQUIREDescriptionDeletes DSLAM configuration files after acquisition

ComponentUBA

ValueDefault: Attribute: Location: false Writable Advanced Properties tab

DetailThe CONFIG_DELETEONACQUIRE parameter specifies whether the DSLAM configuration files should be preserved after the UBA acquires them. A related parameter - CONFIG_URI - specifies the location of these configuration files. Set this parameter to the value true to instruct this UBA application to delete the configuration files after it acquires them. Otherwise, set this parameter to false to instruct this UBA application to preserve the configuration files after it acquires them.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

45

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.DSLAM_CONFIG.URIDescriptionLocation of DSLAM configuration files

ComponentUBA

ValueDefault: Attribute: Location: No default value Read-only Properties tab

DetailThe CONFIG.URI parameter specifies the location, in Universal Resource Identifier (URI) format, for the specified DataChannel applications to retrieve the DSLAM configuration files. A related parameter CONFIG_DELETEONACQUIRE - specifies whether the UBA application should delete these configuration files after it acquires them. The default directory specification makes use of the file protocol, which assumes that the DSLAM configuration files reside on the same server as the UBA.

46

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.DELETEONACQUIREDescriptionDeletes SCHEMA1 bulk input files after acquisition

ComponentUBA

ValueDefault: Attribute: Location: false Writable Advanced Properties tab

DetailThe HUAWEI_U2000_DSLAM_HUAWEI_SCHEMA1.DELETEONACQUIRE parameter specifies whether the bulk input files for the data type associated with the SCHEMA1 schema should be preserved on the remote data source system after the UBA acquires them. A related parameter - HUAWEI_U2000_DSLAM_HUAWEI_SCHEMA1.URI - specifies the location of these bulk input files. Set this parameter to the value true to instruct this UBA application to delete the bulk input files after it acquires them. Otherwise, set this parameter to false to instruct this UBA application to preserve the bulk input files after it acquires them.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

47

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.URIDescriptionLocation of bulk input files for the data type associated with SCHEMA1

ComponentUBA

ValueDefault: Attribute: Location: No default value Read-only Properties tab

DetailThe DataChannel applications that handle inventory and metrics must be directed to the location of the bulk input files generated by the devices associated with the technology on which the application operates. This technology pack supports several different data types. Each data type is associated with a different schema, labelled SCHEMA[N]. The bulk input files for each data type must be stored in separate directories. The HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.URI parameter specifies the location, in Universal Resource Identifier (URI) format, for the specified DataChannel applications to retrieve the bulk input files for the data type associated with the SCHEMA1 schema. A related parameter - HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.DELETEONACQUIRE - specifies whether the UBA application should delete these bulk input files after it acquires them. The HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.URI parameter is read-only. To change the transport mechanism (ftp or secure ftp), host name, user name, password, or input directory fields of the URI specification, edit these parameters: INPUT_USE_SECURE_FTP INPUT_FTP_HOST INPUT_FTP_USERNAME INPUT_FTP_PASSWORD INPUT_DIRECTORY

Note: The actual wildcard used to specify the bulk input files to be acquired is automatically specified in the HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA1.URI parameter.

48

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.DELETEONACQUIREDescriptionDeletes SCHEMA10 bulk input files after acquisition

ComponentUBA

ValueDefault: Attribute: Location: false Writable Advanced Properties tab

DetailThe HUAWEI_U2000_DSLAM_HUAWEI_SCHEMA10.DELETEONACQUIRE parameter specifies whether the bulk input files for the data type associated with the SCHEMA10 schema should be preserved on the remote data source system after the UBA acquires them. A related parameter - HUAWEI_U2000_DSLAM_HUAWEI_SCHEMA10.URI specifies the location of these bulk input files. Set this parameter to the value true to instruct this UBA application to delete the bulk input files after it acquires them. Otherwise, set this parameter to false to instruct this UBA application to preserve the bulk input files after it acquires them.

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

49

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.URIDescriptionLocation of bulk input files for the data type associated with SCHEMA10

ComponentUBA

ValueDefault: Attribute: Location: No default value Read-only Properties tab

DetailThe DataChannel applications that handle inventory and metrics must be directed to the location of the bulk input files generated by the devices associated with the technology on which the application operates. This technology pack supports several different data types. Each data type is associated with a different schema, labelled SCHEMA[N]. The bulk input files for each data type must be stored in separate directories. The HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.URI parameter specifies the location, in Universal Resource Identifier (URI) format, for the specified DataChannel applications to retrieve the bulk input files for the data type associated with the SCHEMA10 schema. A related parameter - HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.DELETEONACQUIRE - specifies whether the UBA application should delete these bulk input files after it acquires them. The HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.URI parameter is read-only. To change the transport mechanism (ftp or secure ftp), host name, user name, password, or input directory fields of the URI specification, edit these parameters: INPUT_USE_SECURE_FTP INPUT_FTP_HOST INPUT_FTP_USERNAME INPUT_FTP_PASSWORD INPUT_DIRECTORY

Note: The actual wildcard used to specify the bulk input files to be acquired is automatically specified in the HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA10.URI parameter.

50

IBM Tivoli Netcool Performance Manager Huawei U2000 DSLAM 2.1.0.0 Technology Pack User Guide

Appendix A: UBA parameters (Tivoli Netcool Performance Manager v4.4.3 and later)

HUAWEI_U2000_DSLAM.HUAWEI_SCHEMA11.DELETEONACQUIREDescriptionDeletes SCHEMA11 bulk input files after acquisition

ComponentUBA

ValueDefault: Attribute: Location: false Writable Advanced Properties tab

DetailThe HUAWEI_U2000_DSLAM_HUAWEI_SCHEMA11.DELETEONA