Thorn 2012

Primata IIFlexible and versatile continuous row trunking system for commercial and industrial applications

www.suntrade.co

m.ua

�

Contents3 Primata II - an introduction

4/5 Applications

6 Fast, safe, simple, cost effective and flexible

7 PEC programme

8 Tool-free installation

9 Electrical configuration

10 Three-phase system

11 Complete control

1� Special accessories

13 How to specify a Primata II lighting system

14 Brackets and suspension (Step 1)

15 Trunking (Step �)

16/17 Trunking accessories (Step �)

18 T16 Luminaires (Step 3)

19 T26 Luminaires (Step 3)

�0/�1 White reflectors (Step 4)

��/�3 Aluminium reflectors (Step 4)

�4/�5 Basic housing with mirror optics (Step 4)

�6/�7 Basic housing with louvre optics (Step 4)

�8 Basic housing accessories (Step 4)

30/31 Optional extras (Step 5)

3�/33 Photometric data

34/35/36 Specification sheet

37 Configuration sheet

www.suntrade.co

m.ua

Primata II, with its simple, consistent tool-free mounting and electrical connection, can reduce installation times by up to 40% compared with conventional products. It is a pre-wired continuous row system with a comprehensive selection of fluorescent luminaires and various optics.

Primata II offers a number of valuable benefits:

• Simple, tool-free installation saves time and money

• Pre-wired trunking improves electrical safety

• Wide range of reflectors, optics and accessories ensures a perfect match for virtually any project and application

• Choice of wiring configurations up to 9-pole can support optional functions including mains power supply, dimming and emergency lighting

Primata II

Pre-wired trunking systems save time and money. They are increasingly popular in today’s cost-sensitive market because they are quick and easy to assemble, and simple to install without special tools

3

www.suntrade.co

m.ua

4

Primata II is an ideal solution in large working areas where uniform illumination is vital. As well as providing efficient and economical output, its precise glare control means that Primata II can be installed in areas where VDT screens are used. A new IP60 (dust-tight) protected lamp enclosure ensures safety and continued performance.

Summary of benefits:

• Efficient and economical

• Uniform illumination

• Glare control in areas where VDT screens are used

• Dust protected lamp version

• Safety

Industry and Production

Primata II offers energy efficient solutions for warehouses and storage areas, through its combination of high output light sources, precisely calculated and designed optics, and a choice of narrow or wide beam distributions.


• High light output promotes clear visibility and safety

• Precise direction of light

• Choice of narrow or wide beam distribution

Warehouses and Distribution

Applications

www.suntrade.co

m.ua

5

Trade Centres and Exhibition Halls

Primata II is a versatile solution that helps to create a comfortable shopping experience in customer-facing areas of all types and sizes. Its glare-free light, with asymmetric distribution for shelf illumination, provides customer comfort and presents products to maximum advantage. The ability to include spotlights, offers additional scope for accent lighting.


• Glare free light for customer comfort

• Precise direction of light

• Asymmetric distribution for shelf lighting

• The ability to integrate spotlights for accent lighting

• Visual comfort and ambience to create a pleasant shopping environment

Supermarkets, Hypermarkets and Commercial Areas

Primata II offers a dynamic solution to nearly any site. It can be easily adapted to any layout, and the right optical performance ensures visitor comfort and optimum presentation of individual stands. Its energy efficiency makes it the preferred system for owners and end users.


• Economical, glare-free light

• Flexibility to adapt to changing space layouts

• Comfort and ambience to create a stimulating environment for visitors

www.suntrade.co

m.ua

6

Fast, safe, simple, cost effective and flexible – it’s the logical choice

Primata II is a tried and proven solution. It’s quick and easy to install, uses latest lamp technologies to save energy, reduces maintenance, and delivers output that’s comfortable and adaptable to a wide range of requirements.

Fast Lighting installations with Primata II can be completed within 40% of the time required for single luminaire installations

Safe Primata II is pre-wired and tested, so good electrical connectivity and site safety are built-in

Simple Primata II can be installed by non-skilled labour, without special tools, however the final electrical connection must be carried out by a qualified electrician

Cost effective Primata II is the cost effective solution that benefits installers and end users alike

Flexible Primata II is available in versions with up to 9-poles for mains power supply, dimming and emergency operation. Optics are available for virtually every application, and can be interchanged to suit any application

Easy to configure and install, Primata II is the ideal choice for applications where quality, efficiency and versatility are essential

www.suntrade.co

m.ua

7

The PEC programme is based on the three main factors in a lighting installation which affect the quality of life and our natural environment:

Performance: Providing the best visual effectiveness

Efficiency: Minimising the use of energy

Comfort: Giving people satisfaction and stimulation

These principles are embodied in the way we design our products as well as individual lighting schemes. By addressing all three factors we can make a dramatic improvement in the quality of life.

Primata II has been designed to fulfil all criteria for achieving PEC in today’s demanding environments, from its choice of light sources and simple installation to its virtually unlimited flexibility. Consistent, tool-free installation, plus a wide range of optics and integrated dimming and emergency options, make it a powerful tool in the drive towards lower costs and higher workplace efficiency.

Performance

Providing the best visual effectiveness Primata II has been designed for optimum performance in a wide range of applications, from industry and production to supermarkets and shops. Its overall flexibility, together with the optical performance of its many attachments, can easily be tailored to any lighting task. Its precisely calculated reflectors offer efficient and economical lighting, and asymmetric reflectors provide wall-washing or uniform vertical illumination.

These are just some of the ‘lighting tools’ which are incorporated into the Primata II concept. Equally important, the fittings can be interchanged to respond to changes in space design or function. This is a truly versatile system. As well as the optics on individual luminaires, entire luminaires can be replaced by track modules when a new lighting scheme requires 3-phase spotlighting, for example.

Efficiency

Minimising the use of energy Energy efficient artificial lighting helps to reduce carbon dioxide emissions into the atmosphere, and Primata II uses the latest technologies to set the pace in environmental sensitivity. With the latest lamp technology such as T16 high output and high efficiency lamps, LOR’s of up to 95% and electronic and dimmable control gear, Primata II is perfectly prepared for this task.

Time is another resource which Primata II can save. Its consistent, tool-free installation method offers enormous benefits for the installer, enabling more jobs to be completed within the same time frame. For end users, too, Primata II can enable a refurbishment to be completed far earlier than using conventional lighting concepts.

Comfort

Giving people satisfaction and stimulation With its choice of different louvre optics and other attachments, Primata II can provide the right combination of glare control, direct lighting and indirect distribution to create a comfortable and productive environment.

The system can also incorporate lighting and emergency controls. Available as options in 7-pole and 9-pole systems, these offer huge advantages in terms of reduced maintenance and increased user friendliness, with straightforward installation. The secret is Primata II’s pre-wired trunking, which already incorporates all necessary components. Now, a state-of-the-art lighting solution with integrated lighting and emergency controls can be fitted as easily as a conventional system.

Performance, Efficiency, Comfort

The aim of Thorn Lighting is to improve quality of life by lighting people and places. Supporting this mission is our PEC programme, through which we deliver efficient and reliable lighting and contribute to a healthy and comfortable environment

www.suntrade.co

m.ua

Each component of a Primata II installation is pre-built in the factory. Work on site is simply a matter of snapping the modules together. Untrained personnel can do this using their two-hands. No tools are required and rates of installation and productivity are impressive.

1. After the suspension element is fixed to the ceiling (wire suspension shown on this example), the trunking simply snaps onto the brackets.

�. Just a simple push and the pre-wired trunking is securely installed. Tool-free electrical and mechanical connection has been made between trunkings, due to its patented connector system.

3. Convenient phase selection inside the luminaire

4. Easy positioning and tool-free installation of the luminaire

5. Electrical and mechanical connection by one single operation – just rotating the turnbuckle

6. Optics can now be installed via a simple snap-on mechanism

7. Just press the optic towards the system and the spring-loaded fixation mechanism retains it immediately

8. After attaching reflector end caps and couplers are put on, lamps can be fitted

9. Various louvres or optics can be conveniently added without the use of any tools

10. Congratulations – you have just completed your first Primata II installation!

1 �

3 4 5 6

7 8

9 10

8

Tool-free installation

www.suntrade.co

m.ua

Electrical configuration

L1

L2

L3

N

E

LUMINAIRE CP, NC or HF

D1

D2

L1

L2

L3

N

E

Unswitched L1

EN

EL

L1

L2

L3

N

E

LUMINAIRE HF E3 or E3T

D1

D2

L2

L3

N

E

LUMINAIRE HFD

LUMINAIRE HFD E3 or E3T

D1D2ELENL1L2L3NE

LUMINAIRE HF EX3

* ***

** **

** * Electrical connection to the system if phase � or 3 selected

5-pole 5-poles configured for three-phase operation: Primata II supports ‘load sharing’ to triple the maximum length of a continuous run, compared to standard single-phase environments. This is possible because each phase can be used to maximum loading. In addition, Primata II provides separate circuits which can be switched independently for very basic lighting control. Compatible luminaires include CP - Switch Start Compensated, NC - Switch Start Non-Compensated and HF.

7-pole 7-poles configured for three-phase operation: Primata II enhances 5-pole capabilities by supporting additional dimming and/or standard emergency or SelfTest emergency lighting. These options are available with dimming and emergency versions HFD, HF E3, HF E3T, HFD E3, HFD E3T.

9-pole 9-poles configured for three-phase operation: Primata II can incorporate high-end emergency lighting. It is the ultimate in multi-functional (HF E3X) trunking and management.

Electrical safety Primata II uses dedicated connectors to achieve perfect electrical connections with optimum safety. There are no complicated electrical connections and no terminal blocks between luminaires and wiring. The turnbuckle mechanism ensures that once a connection is made, it stays secure.

Standards Designed and manufactured to comply with EN 60598 Emergency version EN 60598.�.�� Class I Electrical IP�0 IP40 with IP40 kit IP60 Industrial fitting (in preparation)

9

www.suntrade.co

m.ua

MCB C10 C13 C16 B10 B13 B16

1x36 T�6 NC 39 47 6� �3 �8 37 �x36 T�6 NC 19 �3 31 11 14 18 1x58 T�6 NC �5 30 40 15 18 �4 �x58 T�6 NC 1� 15 �0 7 9 1�

1x36 T�6 CP 54 66 87 3� 39 51 �x36 T�6 CP �7 33 43 16 19 �5 1x58 T�6 CP 35 4� 56 �0 �5 33 �x58 T�6 CP 17 �1 �8 10 1� 16

1x36 T�6 HF 3� 48 70 16 �4 35 �x36 T�6 HF �0 30 40 10 15 �0 1x58 T�6 HF 3� 46 66 16 �3 33 �x58 T�6 HF 14 �0 �6 7 10 13

1x36 T�6 HFD 30 50 70 15 �5 30 �x36 T�6 HFD 10 �0 30 5 10 15 1x58 T�6 HFD �0 30 40 10 15 �0 �x58 T�6 HFD 10 �0 30 5 10 15

1x�8 T16 HF 44 78 80 �� 39 40 �x�8 T16 HF 18 �8 30 9 14 15 1x35 T16 HF 46 80 80 �3 40 40 �x35 T16 HF �0 30 30 10 15 15

1x54 T16 HF 30 46 50 15 �3 �5 �x54 T16 HF 14 �0 �4 7 10 1� 1x80 T16 HF 18 �8 30 9 14 15 �x80 T16 HF 9 14 15 4 7 7

1x�8 T16 HFD 3� 50 7� 16 �5 36 �x�8 T16 HFD 16 �� 30 8 11 15 1x35 T16 HFD 3� 50 70 16 �5 35 �x35 T16 HFD 16 �� 30 8 11 15

1x54 T16 HFD �� 3� 44 11 16 �� x54 T16 HFD 14 �� 8 7 11 14 1x80 T16 HFD 10 �0 30 5 10 15 �x80 T16 HFD 5 10 15 � 5 7

10

For high load applications the three-phase design of Primata II offers enormous benefits. Every luminaire can be set to pick one of the phases by using a simple selector tab at the connector. Because this flexibility allows long uninterrupted runs, Primata II is the perfect solution for large buildings or long, narrow transport areas.

These benefits are possible because of the characteristics of three-phase power. A balanced three-phase load minimises the ‘reactive power’ (kVA) drawn from the mains, reducing the amount of energy consumed. In addition, each luminaire is connected to one of the three phases, so most luminaires can be turned off at night or during periods of low requirement, while maintaining sufficient illumination in critical areas.

Max load Maximum load recommendation for Miniature Circuit Breakers (MCB)

For lighting installations the use of C type MCBs is recommended.

The following table gives some typical values (recommendations) and is valid for one pole MCBs (single phase application) and a supply voltage of �30V.

When using multi-pole MCBs (3-phase application) the number of ballasts has to be reduced by �0%.

The table on right shows the maximum number of fittings which can be installed dependant on wattage and MCB.

Three-phase system

240

200

160

120

80

40

0 0 2 4 6 8 10 12 14 16 18 20

-40

-80

-120

-160

-200

-240

Volta

ge (V

)

Time (milliseconds)

L1

L2

L3

The sum of the currents on the three phases is zero at any time, therefore for a balanced load, the return current down the common neutral is zero as well

NC - Switch Start Non-CompensatedCP - Switch Start CompensatedHF - High FrequencyHFD - High Frequency Dimmableww

w.suntrade.co

m.ua

E3 E3T E3X Self contained SelfTest Addressable test

Automatic testing No Yes Yes

EN 1838 (BS5�66) compliance Yes Yes Yes

Fault Indication Locally via LED on luminaire (battery charging only) Locally via LED on luminaire Centrally logged on Control Panel

Fault Reports Generated Manually Manually Printed or via SMS text

Programmable No No Yes

Addressable No No Yes

Typical Application

Small to medium installations where manual checking is no problem for the user. For example: small storage areas, warehouses, workshops, shops, etc.

Small to medium areas where automatic testing is beneficial but visual inspection of the luminaire is easily possible, such as galleries, supermarkets, offices, lower and medium industrial facilities, etc

Medium and large sized projects where visual inspection of luminaires is impractical or undesirable. For example: Universities, schools and colleges, museums, large stores, supermarkets, DIY centres, offices, higher industrial facilities, warehouses, etc.

Dimming Lighting can be responsible for more than �0% of total electricity consumption. In office buildings it can account for as much as half of total energy costs. The use of lighting controls can reduce this figure by up to �5%, encouraging users to minimise wasteful use of light and make the maximum use of natural light using presence and/or daylight linked controls. This approach is in line with energy regulations such as the Energy Performance of Buildings Directive (EPBD) which is driving energy saving initiatives throughout Europe.

Primata II is designed to support advanced indoor lighting controls without any additional installation effort.

Emergency Just like fire protection systems, emergency lighting is potentially life saving – provided it is properly maintained. Increasingly stringent legal requirements require owners to inspect, test and maintain emergency lighting in workplaces and public buildings.

Primata II offers a wide range of compliant solutions. Its emergency product range includes basic (E3) self-contained luminaires as well as SelfTest (E3T) and Addressable test (E3X) emergency luminaires which are fully compliant with European Standards. The E3T and E3X systems deliver complete peace of mind and safety without the need for costly and time consuming manual testing by a competent person. Primata II can incorporate these luminaires without any additional effort.

Complete control

The following emergency options are available to suit varying requirements and budgets. The comparison table should help to decide which option is best for you, considering the project environment:

11

www.suntrade.co

m.ua

1�

More than just a trunking system - special accessories

IP60 Industrial Optic In environments where airborne particles can leave deposits on lamps and reflectors, high IP ratings are essential to maintain LOR performance. Primata II with the IP60 (dust-tight) Industrial Optic offers this protection, extending cleaning and maintenance intervals, maintaining output levels, and reducing costs. It is an outstanding choice for any manufacturing application, including the automotive industry.

Track Module The use of spotlights for accent lighting within a general lighting system is becoming increasingly popular in supermarkets, shops, showrooms and other spaces where items are on display. The Primata II Track Module enables spotlighting to be incorporated into a Primata II installation. Solutions such as Graffiti spotlights are highly effective.

The Track Module maintains the modular design of the rest of the Primata II family and can therefore be easily integrated into any lighting design. It can also be removed and used elsewhere when the floor plan or lighting design is changed, without requiring trained electricians.

Presence Detector An integrated Presence Detector module enables Primata II luminaires to be switched on only when needed. This is the simplest way to reduce energy consumption.

Angle connectors Primata II L, T and X trunking connectors allow designers to create various shapes within continuous row systems.

A simple Trunking Coupler Kit must be used with Angled Connectors (L,Tand X connectors), when using optics and reflectors.

www.suntrade.co

m.ua

13

How to specify a Primata II lighting system

The specification sheet will guide you through the ordering process of any Primata II configuration and will make sure that you don’t miss that vital part – it’s very easy and most convenient!

Using the fold out specification sheetAt the back of the brochure you will find a fold out page which will give you a logical ordering flow. You can use this when browsing through the pages of the brochure to specify all the right parts for your individual system.Just simply follow Step 1 – 4 (or even 5 if additional accessories are wanted) to complete your ordering list.

Suspension bracketsSelect suspension brackets, which will be suitable for your application or building/installation environment. Turn to page 14 for Step 1 Ordering Guides.

Trunking and electrical connectionSelect trunking with 5, 7 or 9-pole wiring depending on which luminaire is to be used. Make sure the modularity of the trunking/wiring specified matches the luminaire. Specify all other accessories, which might be needed in conjunction with the trunking or wiring (couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for Step � Ordering Guides.

LuminairesSpecify the luminaire to go with the system, depending on the functionality (dimming, emergency) you need and wattage, which was considered when selecting the pre-wired trunking. If IP40 is required for the system, please select the correct IP40 kit. Turn to pages 18 and 19 for Step 3 Ordering Guides.

OpticsDepending on what kind of light distribution or level of glare control is required within the application, select the particular optic in the right wattage. Dedicated end caps and couplers to be specified as well. Turn to pages �0 - �9 for Step 4 Ordering Guides.

Optional ExtrasAdditional accessories such as spotlight modules or presence detectors can also be specified. The only exception within the ordering process is the Industrial Optic IP60, where no separate luminaire or end caps etc. need to be specified (supplied as a complete fitting). Turn to pages 30 and 31 for Step 5 Ordering Guides.

Step 1

Step 2

Step 3

Step 4

Step 5ww

w.suntrade.co

m.ua

14

Brackets and Suspension Ordering Guide(for complete luminaire follow ordering steps 1-5) Description SAP Code

Direct Ceiling Installation Clip PR� FIX** 9650�601 Caddy Clip PR� FIX/CAD ** 9650�60� Chain suspension PR� FIX/CH** Chain suspension bracket 9650�603 PR� FIX/CHA ** Adjustable chain suspension bracket 9650�604 PR� CH Suspension chain (per metre) 9650�605 PR� FIX/CHRA** Bracket for angled installation (for axial rotation) 9650�606 Wire suspension kits PR� MSW1 1000 1m wire suspension 9650�607 PR� MSW1 �000 �m wire suspension 9650�608 PR� MSW1 5000 5m wire suspension 9650�609 Catenary wire suspension PR� FIX/CAT* 9650�610 * For catenary wires up to 1�mm diameter** One bracket per code

Fixing brackets

• All fixing brackets attach tool-free to the trunking via a snap-on mechanism and a common stainless-steel quick-fix bracket

• Direct ceiling installation

• Caddy clip bracket for fastening on exposed ceiling carrier systems of �4mm - �6mm

• Chain suspension brackets, adjustable (FIX/CHA) and non adjustable triangle (FIX/CH) and galvanised suspension chain (CH) which is supplied in metres

• Maximum distance between suspension brackets is 3 metres

• Chain suspension brackets for angled installation, to allow axial rotation

• Wire suspension kits in three different lengths for tool-free height adjustment via clutch mechanism

• Catenary wire suspension for catenary wires up to 1�mm diameter

Specification To specify state: Fixing bracket for trunking systems. As Thorn Primata II...

Brackets and suspension

Direct ceiling installation Caddy clip Adjustable chain suspensionChain suspension bracket

Suspension chain (per metre) Wire suspension kit Catenary wire suspension

Step 1

Bracket for angled installation

www.suntrade.co

m.ua

15

51

60

1175/�350/35�51475/�950/44�5

51

60

1��6/�45�/367815�6/305�/4578

T16 trunking

T26 trunking

Trunking

Un-wired Trunking Ordering GuideDescription Weight (Kg) SAP Code PR� T 15�6 1.6 9650�651PR� T 305� 3.� 9650�65� PR� T 4578 4.8 9650�653

Pre-wired trunking

• Pre-wired trunking with 5, 7 or 9-pole wiring integrated

• Wires in �.5mm�

• Electrical connection points in modular distance for 36/58/�8/54 or 35/49/80W

• Tool-free connection with unique connector (to be ordered separately)

Materials/Finish Trunking: roll-formed sheet steel pre-painted white

Installation/Mounting Trunking prepared for easy mechanical and electrical connection

Specification To specify state: 5, 7 or 9-pole, �.5mm�, pre-wired trunking with electrical connection points in modular distance for use with trunking system. As Thorn Primata II T TW

Un-wired trunking

• Un-wired trunking for installing other Primata II accessories or different luminaires

• Tool-free connection with unique connector (to be ordered separately)

Specification To specify state: Unwired trunking. As Thorn Primata II T

Step 2

Pre-wired Trunking Ordering Guide(for complete luminaire follow ordering steps 1-5)Description Weight (Kg) SAP Code

5-pole Modular length for 1 fitting PR� T TW 1��6 5x�,5/36 1.8 9650�611 PR� T TW 15�6 5x�,5/58 �.� 9650�61� PR� T TW 1175 5x�,5/�8/54 1.8 9650�613 PR� T TW 1475 5x�,5/35/49/80 �.� 9650�614 Modular length for 2 fittings PR� T TW �45� 5x�,5/36 3 9650�6�3 PR� T TW 305� 5x�,5/58 3.8 9650�6�4 PR� T TW �350 5x�,5/�8/54 3 9650�6�5 PR� T TW �950 5x�,5/35/49/80 3.8 9650�6�6 Modular length for 3 fittings PR� T TW 3678 5x�,5/36 4.� 9650�635 PR� T TW 4578 5x�,5/58 5.4 9650�636 PR� T TW 35�5 5x�,5/�8/54 4.� 9650�637 PR� T TW 44�5 5x�,5/35/49/80 5.4 9650�638

7-Pole Modular length for 1 fitting PR� T TW 1��6 7x�,5/36 �.05 9650�615 PR� T TW 15�6 7x�,5/58 �.5 9650�616 PR� T TW 1175 7x�,5/�8/54 �.05 9650�617 PR� T TW 1475 7x�,5/35/49/80 �.5 9650�618 Modular length for 2 fittings PR� T TW �45� 7x�,5/36 3.5 9650�6�7 PR� T TW 305� 7x�,5/58 4.4 9650�6�8 PR� T TW �350 7x�,5/�8/54 3.5 9650�6�9 PR� T TW �950 7x�,5/35/49/80 4.4 9650�630 Modular length for 3 fittings PR� T TW 3678 7x�,5/36 4.95 9650�639 PR� T TW 4578 7x�,5/58 6.3 9650�640 PR� T TW 35�5 7x�,5/�8/54 4.95 9650�641 PR� T TW 44�5 7x�,5/35/49/80 6.3 9650�64�

9-Pole Modular length for 1 fitting PR� T TW 15�6 9x�,5/58 �.8 9650�6�0 PR� T TW 1475 9x�,5/35/49/80 �.8 9650�6�� Modular length for 2 fittings PR� T TW 305� 9x�,5/58 5 9650�63� PR� T TW �950 9x�,5/35/49/80 5 9650�634 Modular length for 3 fittings PR� T TW 4578 9x�,5/58 7.� 9650�644 PR� T TW 44�5 9x�,5/35/49/80 7.� 9650�646

www.suntrade.co

m.ua

16

58

300

86

58

243

399

86

58

243

243

58

86

399

399

Cover strip

• Plastic cover strip in luminaire length to allow modular installation on pre-wired trunking (gaps in luminaires)

• Tool-free and easy assembling

• 850°C fire retardant

Specification To specify state: Plastic cover strip in modular length. As Thorn Primata II CF

Trunking end cap

• White plastic end caps for trunking ends to provide neat appearance and perfect alignment


• Knock-out holes for cable entry

Specification To specify state: Plastic end-cap for trunking system. As Thorn Primata II ECP

Trunking couplers

• Coupler for mechanical tool-free connection of trunking

• 90° L, T and X couplers for mechanical tool-free connection of trunking

Materials/Finish Coupler: galvanised steel with plastic cover (L, T and X only)

Installation/Mounting Couplers for mechanical connection of trunking without the use of any tools

Specification To specify state: Trunking coupler (or L, T, X coupler) for trunking system. As Thorn Primata II T-C (L, T, X)Note: When ordering the L, T and X coupler together with reflectors and optics, then you must order the relevant trunking coupler kit, please see ordering guide on page 17

Grommet

• Rubber grommet to use on knock-outs at the back of the trunking to protect cable

Specification To specify state: Rubber grommet for trunking system. As Thorn Primata II GRM

Trunking accessories

www.suntrade.co

m.ua

17

Step 2

Additional wiring• Additional �-pole wiring set for 7-pole pre-wired trunking,

to upgrade systems at a later date• Wires in �.5 mm�

• Electrical connection points in modular distance for 36/58/�8/54 or 35/49/80W

SpecificationTo specify state: �-pole, �.5mm�, additional wiring with electricalconnection points in modular distance for use with trunking systems. As Thorn Primata II TW

Mains terminal – Electrical feed

• Power feed for electrical connection for 5, 7 and 9-pole pre-wired trunking

• Plug-in terminals for mains power supply, dimming and emergency

• For 5-pole or 7-pole in conjunction with dimming, use PR� TB/TRU 5/7 DIM

• For 7-pole in conjunction with emergency use PR� TB/TRU 5/7 EM

• For 9-pole use PR� TB/TRU 9

Specification To specify state: Electrical feed for 5, 7 and 9-pole pre-wired trunking for trunking systems. As Thorn Primata II TB/TRU

Cable Fixings

• Cable cleat to fix additional internal wiring (CC)

• Cable clip to secure additional cables on top of the trunking (TCC)

CC

TCC

Ordering Guide (for complete luminaire follow ordering steps 1-5)Description Weight (Kg) SAP Code

Trunking Couplers PR� T-C TRUNKING COUPLER 0.3 9650�654 PR� T-CL L CONNECTOR 0.5 9650�655 PR� T-CT T CONNECTOR 0.7 9650�656 PR� T-CX X CONNECTOR 0.7 9650�657

Trunking Endcaps PR� ECP - 9650�664 Grommet PR� GRM - 9650�663 Cover Strip PR� CF 36 0.� 9650�643PR� CF 58 0.� 9650�665 PR� CF �8/54 0.� 9650�645PR� CF 35/49/80 0.� 9650�666

Mains terminal block for 5 and 7-pole PR� TB/TRU 5/7 DIM - 9650�658 PR� TB/TRU 5/7 EM 9650�660

Mains terminal block for 9-pole PR� TB/TRU 9 - 9650�659 Additional wiring PR� TW �x�,5/58 0.3 9650�648 PR� TW �x�,5/35/49/80 0.3 9650�650 Cable fixings PR� CC CABLE CLEAT (INSIDE TRUNKING) - 9650�661PR� TCC CABLE CLIP (ON TOP OF TRUNKING) - 9650�66�

58

243

450

86

L connector with white reflector, twin

Description Weight (Kg) SAP Code

Trunking Coupler Kits PR� T-CL KIT TRUNKING L COUPLER KIT - 96�33756 PR� T-CT KIT TRUNKING T COUPLER KIT - 96�33757 PR� T-CX KIT TRUNKING X COUPLER KIT - 96�33758

www.suntrade.co

m.ua

4� 9 16

60

Step 3

18

Lamps �8-80W T16 (FDH) linear fluorescent, Cap: G5

Materials/Finish Body: pre-painted white roll-formed sheet steel Lamp holder: injection moulded white plastic

Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking, luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, optics easily clipped onto luminaire if required.

Specification To specify state: Single or twin (narrow) �8-80W T16 linear fluorescent luminaire for use with 5, 7 or 9-pole Primata trunking system and optics. As Thorn Primata II T16 luminaire.

IP40 Kit for T16 luminaires: Can be fitted to any T16 luminaire or optic to increase the protection class to IP40. Two IP40 Kits have to be ordered per luminaire/optic.

T16 Luminaires

T16 Luminaire Ordering Guide Lamp(s) to be ordered separately (for complete luminaire follow ordering steps 1-5)Description Ilcos Socket Weight (Kg) SAP Code Emergency SelfTest Addressable Test Code E3 E3T E3X High Frequency PR� 1/�8W T16 HF FDH G5 0.9 9650�704 - - - PR� 1/35W T16 HF FDH G5 1 9650�705 9650�714 9650�7�0 9650�7�6 PR� 1/49W T16 HF FDH G5 1 9650�706 9650�715 9650�7�1 9650�7�7PR� 1/54W T16 HF FDH G5 1 9650�707 - - - PR� 1/80W T16 HF FDH G5 1.1 9650�708 9650�716 9650�7�� 9650�7�8PR� �/�8W T16 HF FDH G5 1.1 9650�709 - - - PR� �/35W T16 HF FDH G5 1.� 9650�710 9650�717 9650�7�3 9650�7�9PR� �/54W T16 HF FDH G5 1.1 9650�711 - - - PR� �/49W T16 HF FDH G5 1.� 9650�71� 9650�718 9650�7�4 9650�730PR� �/80W T16 HF FDH G5 1.� 9650�713 - - - High Frequency Dimmable PR� 1/�8W T16 HFD FDH G5 1 9650�73� - - - PR� 1/35W T16 HFD FDH G5 1.1 9650�733 9650�74� 9650�748 - PR� 1/49W T16 HFD FDH G5 1.1 9650�734 9650�743 9650�749 - PR� 1/54W T16 HFD FDH G5 1.1 9650�735 - - - PR� 1/80W T16 HFD FDH G5 1.� 9650�736 9650�744 9650�750 -PR� �/�8W T16 HFD FDH G5 1.� 9650�737 - - - PR� �/35W T16 HFD FDH G5 1.3 9650�738 9650�745 9650�751 PR� �/54W T16 HFD FDH G5 1.� 9650�739 - - - PR� �/49W T16 HFD FDH G5 1.3 9650�740 9650�746 9650�75� PR� �/80W T16 HFD FDH G5 1.3 9650�741 - - -

IP40 Kit T16 (two needed per luminaire) PR� IP40 KIT 1/T16 - - - 9650�669 - - -PR� IP40 KIT �/T16 - - - 9650�670 - - -

• Available in single and twin lamp (narrow) versions, where both versions can mostly use the same optic

• High-frequency ballasts

• Modular design accommodates options for lighting management and emergency lighting

• Simple phase selection for power supply and emergency/dimming circuits

• Tool-free installation

• Thorn turnbuckles ensure electrical and mechanical connection in one step

T16 single luminaire

T16 twin luminaire

T16 single/twin luminaire

www.suntrade.co

m.ua

53

60 136

53

Step 3

19

T26 Luminaires Ordering Guide Lamp(s) to be ordered separately(for complete luminaire follow ordering steps 1-5) Description Ilcos Socket Weight (Kg) SAP Code Emergency SelfTest AddressableTest Code E3 E3T E3X Magnetic ballasts PR� 1/36W T�6 CP FD G13 1.6 9650�674 - - -PR� 1/58W T�6 CP FD G13 1.7 9650�675 - - - PR� �/36W T�6 CP FD G13 �.1 9650�676 - - -PR� �/58W T�6 CP FD G13 �.7 9650�677 - - - PR� 1/36W T�6 NC FD G13 1.6 9650�678 - - -PR� 1/58W T�6 NC FD G13 1.7 9650�679 - - - PR� �/36W T�6 NC FD G13 �.1 9650�680 - - -PR� �/58W T�6 NC FD G13 �.7 9650�681 - - - High Frequency PR� 1/36W T�6 HF FD G13 1.� 9650�68� 9650�686 PR� 1/58W T�6 HF FD G13 1.3 9650�683 9650�687 9650�690 9650�69� PR� �/36W T�6 HF FD G13 1.5 9650�684 9650�688 - - PR� �/58W T�6 HF FD G13 1.7 9650�685 9650�689 9650�691 9650�693 High Frequency Dimmable PR� 1/36W T�6 HFD FD G13 1.5 9650�694 - - - PR� 1/58W T�6 HFD FD G13 1.7 9650�695 9650�699 9650�70� PR� �/36W T�6 HFD FD G13 1.8 9650�696 - - - PR� �/58W T�6 HFD FD G13 � 9650�697 9650�701 9650�703

IP40 Kit T26* PR� IP40 KIT T�6 - - - 9650�668 - - - *Two needed per single and four needed per twin lamp luminaireCP - Compensated, NC - Non-compensated

• Single and twin lamp versions – can be used with dedicated optics

• Magnetic or high-frequency ballasts

• Modular design accommodates options for lighting management and emergency lighting

• Simple phase selection for power supply and emergency/dimming circuits


• Thorn turnbuckles ensure electrical and mechanical connection in one step

Lamps 36-58W T�6 (FD) linear fluorescent, Cap: G13

Materials/Finish Body: roll-formed sheet steel pre-painted white Lamp holder: injection moulded white plastic

Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking. Luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket. System phase selection at connector. Optics easily clipped onto luminaire, if required.

Specification To specify state: Single or twin 36-58W T�6 linear fluorescent luminaire for use with 5, 7 or 9-pole trunking system and optics. As Thorn Primata II T�6 luminaire.

IP40 Kit for T26 luminaires: Can be fitted to any T�6 luminaire or optic to increase the protection class to IP40. Two IP40 Kits have to be ordered for a single lamp luminaire. Four kits for a twin lamp type.

T26 Luminaires

T26 single luminaire

T26 twin luminaire

T26 single luminaire T26 twin luminaire

www.suntrade.co

m.ua

�0

Coupler for R and RLW

• White plastic coupler for reflector PR� R and PR� RLW to provide neat appearance and perfect alignment

• Simple, tool-free assembly

• One pair needed per junction

End cap for R and RLW

• White plastic end cap for reflector PR� R and PR� RLW to provide neat appearance and perfect alignment


One pair needed per housing or uninterrupted continuous run

End cap for RA

• White plastic end caps for reflector PR� RA to provide neat appearance


• One pair needed per housing

Materials/Finish Reflector: sheet steel, white pre-painted finish End caps and couplers: injection moulded white finish

Installation/Mounting Unique ‘snap-in’ mechanism enables easy tool-free installation onto luminaire

Specification To specify state: White reflector for single or twin T16 and T�6 luminaire for use with trunking system. As Thorn Primata II R

Specification To specify state: White reflector with white louvre grille for single or twin T16 and T�6 luminaire for use with trunking system. As Thorn Primata II RLW

Specification To specify state: White asymmetric reflector for single/twin T16 or single T�6 luminaire for use with trunking system. As Thorn Primata II RA

White reflectors

White Reflectors Ordering Guide For complete luminaire follow ordering steps 1-5 Description Weight (Kg) SAP Code White Reflector For use with single T26 luminaires PR� R 1x36 1.� 9650�754PR� R 1x58 1.5 9650�755 For use with twin T26 luminaires PR� R �x36 1.7 9650�756PR� R �x58 �.1 9650�757 For use with single or Twin T16 luminaires PR� R 1/�x�8/54 1.1 9650�758PR� R 1/�x35/49/80 1.4 9650�759

White Reflector with white louvres For use with single T26 luminaires PR� RLW 1x36 �.4 9650�760PR� RLW 1x58 �.9 9650�761 For use with twin T26 luminaires PR� RLW �x36 3.6 9650�76�PR� RLW �x58 4.5 9650�763 For use with single or twin T16 luminaires PR� RLW 1/�x�8/54 �.3 9650�764PR� RLW 1/�x35/49/80 �.8 9650�765

Coupler for R and RLW PR� R-C 1xT�6 1/�xT16 Pair 9650�844PR� R-C �xT�6 Pair 9650�845

End Cap for R and RLW PR� R-EC 1xT�6 1/�xT16 Pair 9650�846PR� R-EC �xT�6 Pair 9650�847

White Asymmetric Reflector For use with single T26 luminaires PR� RA 1x36 1.4 9650�766PR� RA 1x58 1.8 9650�767 For use with single or twin T16 versions PR� RA 1/�x�8/54 1.3 9650�768PR� RA 1/�x35/49/80 1.7 9650�769

End Cap for RA PR� RA-EC Pair 9650�848 ** (one pair needed per housing or uninterrupted continuous run)Couplers for R and RLW

• Suitable for T16 and T�6 single and twin lamp luminaires (see pages 18 and 19)

• White plastic couplers and end caps provide neat appearance and perfect alignment

• Ideally suited to low mounting in industrial or utility areas which require high levels of uniform light

• Asymmetric reflectors for illumination of vertical surfaces

End caps for R and RLW End caps for RA

www.suntrade.co

m.ua

164

58

51

�74

58

51

170

80

51

�83

80

51

58

51

164

87

51

87

58

51

164

�1

T26 asymmetric white reflector, single

T26 white reflector, single

T26 white reflector, twin

T26 white reflector with white louvre, single

T26 white reflector with white louvre, twin

Step 4

87

51

87

T16 white reflector, single or twin

T16 white reflector with white louvre, single or twin

T16 asymmetric white reflector, single or twinwww

.suntrade.co

m.ua

��

Aluminium reflectors

Materials/Finish Reflector: roll-formed aluminium Mirrorbrite finish

Installation/Mounting Reflector clips easily and tool-free onto luminaire via stainless steel bracket. Reflectors designed to overlap, ensuring perfect fit and alignment.

Specification To specify state: Wide beam Mirrorbrite aluminium reflector for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II WB.

Specification To specify state: Narrow beam Mirrorbrite aluminium reflector for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II NB.

Specification To specify state: Wallwasher Mirrorbrite aluminium reflector for single/twin T16 and single T�6 luminaires for use with trunking system. As Thorn Primata II WA

Aluminium Reflector Ordering Guide(for complete luminaire follow ordering steps 1-5)Description Weight (Kg) SAP Code Aluminium Reflector Wide Beam For use with single T26 luminaires PR� WB 1x36 0.6 9650�770PR� WB 1x58 0.7 9650�771 For use with twin T26 luminaires PR� WB �x36 0.7 9650�77�PR� WB �x58 0.8 9650�773 For use with single or twin T16 luminaires PR� WB 1/�x�8/54 0.6 9650�774PR� WB 1/�x35/49/80 0.7 9650�775

Aluminium Reflector Narrow Beam For use with single T26 luminaires PR� NB 1x36 0.7 9650�776PR� NB 1x58 0.8 9650�777 For use with twin T26 luminaires PR� NB �x36 0.8 9650�778PR� NB �x58 0.9 9650�779 For use with single or twin T16 luminaires PR� NB 1/�x�8/54 0.7 9650�780PR� NB 1/�x35/49/80 0.8 9650�781

Aluminium Wallwasher For use with single T26 luminaires PR� WA 1x36 0.6 9650�78�PR� WA 1x58 0.7 9650�783 For use with single or twin T16 luminaires PR� WA 1/�x�8/54 0.6 9650�784PR� WA 1/�x35/49/80 0.7 9650�785

• Suitable for T16 and T�6 single and twin lamp luminaires (see pages 18 and 19)

• One-piece aluminium reflector in Mirrorbrite finish provides excellent optical control

• Reflectors overlap to provide visually continuous system, no need for separate end caps or couplers

• Ideally suited to high mounting in industrial and lower retail areas with demanding visibility requirements

• Wall washer for uniform vertical illumination

www.suntrade.co

m.ua

76

129

51

78

�39

51

7�

113

51

96

175

51

9� 50

51

141

�15

110

51

315

85

51

115

66

�40

51

�3

T16 aluminium wide beam reflector, single or twin

T16 aluminium narrow beam reflector, single or twin

T16 aluminium reflector, wallwasher, single or twin

T26 aluminium wide beam reflector, single

T26 aluminium wide beam reflector, twin

T26 aluminium narrow beam reflector, single

T26 aluminium reflector, wallwasher, single

T26 aluminium narrow beam reflector, twin

Step 4

www.suntrade.co

m.ua

�4

Basic housings with mirror optics

Materials/Finish Housing: sheet steel, white pre-painted Integrated reflector: roll-formed Satinbrite aluminium End caps and couplers: injection moulded white plastic

Installation/Mounting Unique ‘snap-in’ mechanism enables easy tool-free installation onto luminaire

Specification To specify state: White basic housing with integrated wide beam Satinbrite aluminium reflector for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II HWB

Specification To specify state: White basic housing with integrated asymmetric Satinbrite aluminium reflector for single T�6 luminaires for use with trunking system. As Thorn Primata II HA

Specification To specify state: White basic housing with integrated double-sided asymmetric Satinbrite aluminium reflector for twin T�6 luminaires for use with trunking system. As Thorn Primata II HAD

Basic housing with mirror optics Ordering Guide(for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Basic housing with wide beam optics For use with single T26 luminaires PR� HWB 1x36 �.5 9650�79�PR� HWB 1x58 3 9650�793 For use with twin T26 luminaires PR� HWB �x36 3.4 9650�794PR� HWB �x58 4.3 9650�795 For use with single or twin T16 luminaires PR� HWB 1/�x�8/54 � 9650�796PR� HWB 1/�x35/49/80 �.4 9650�797

Basic housing with asymmetric mirror optics (single T26 only) PR� HA 1x36 �.5 9650�798PR� HA 1x58 3 9650�799

Basic housing with double sided asymmetric mirror (twin T26 only) PR� HAD �x36 3.4 9650�800 PR� HAD �x58 4.3 9650�801

• Suitable for T16 and/or T�6 single and twin lamp luminaires (see pages 18 and 19)

• Choice of wide, asymmetric or double-sided asymmetric reflectors

• White plastic couplers and end caps available to provide neat appearance (see page �8)

• Ideal solutions for supermarkets and hyper-markets applications and shelf lighting

www.suntrade.co

m.ua

T16 wide beam mirror, single or twin T26 wide beam mirror, single

T26 double sided asymmetric mirror, twin

T26 wide beam mirror, twin

T26 asymmetric mirror, single

66

113

51

173

95

51

�83

95

51

173

95

51

�83

95

51

�5

Step 4

www.suntrade.co

m.ua

�6

Basic housings with louvre optics

• Suitable for T16 and T�6 single and twin lamp luminaires (see page 18 and 19)

• Choice of white painted steel, perforated white steel, Satinbrite aluminium or Mirrorbrite aluminium louvres to control glare

• Satinbrite and Mirrorbrite louvres comply with EN 1�464 guidelines for modern VDT screens (depending on the wattage used with the optic)

• White plastic couplers and end caps available to provide neat appearance (see page �8)

• Ideally suited to retail, commercial and production areas with VDT screens

• Microperforated versions create a more comfortable environment with additional ambient lighting

Materials/Finish Housing: sheet steel, white pre-painted with roll-formed aluminium reflector inserts Louvre: Satinbrite, Mirrorbrite aluminium or white painted steel or perforated End caps and couplers: injection moulded white plastic

Installation/Mounting Unique snap-in mechanism enables easy tool-free installation onto luminaire

Specification To specify state: White basic housing with Satinbrite louvre for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II HLS

Specification To specify state: White basic housing with Mirrorbrite louvre for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II HLM

Specification To specify state: White basic housing with white painted steel louvre for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II HLW

Specification To specify state: White perforated basic housing with white perforated steel louvre for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II HLW PF

Basic housing with louvre optics Ordering Guide(for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Basic housing with Satinbrite louvres For use with single T26 luminaires PR� HLS 1x36 �.7 9650�814PR� HLS 1x58 3.4 9650�815 For use with twin T26 luminaires PR� HLS �x36 3.8 9650�816PR� HLS �x58 4.6 9650�817 For use with single or twin T16 luminaires PR� HLS 1/�x�8/54 � 9650�818PR� HLS 1/�x35/49/80 �.4 9650�819

Basic housing with Mirrorbrite louvres For use with single T26 luminaires PR� HLM 1x36 �.7 9650�8�0PR� HLM 1x58 3.4 9650�8�1 For use with twin T26 luminaires PR� HLM �x36 3.8 9650�8��PR� HLM �x58 4.6 9650�8�3 For use with single or twin T16 luminaires PR� HLM 1/�x�8/54 � 9650�8�4PR� HLM 1/�x35/49/80 �.4 9650�8�5

Basic housing with White louvres For use with single T26 luminaires PR� HLW 1x36 3.� 9650�80�PR� HLW 1x58 4.1 9650�803 For use with twin T26 luminaires PR� HLW �x36 5.4 9650�804PR� HLW �x58 6.� 9650�805 For use with single or twin T16 luminaires PR� HLW 1/�x�8/54 �.5 9650�806PR� HLW 1/�x35/49/80 �.9 9650�807

Perforated basic housing with white perforated louvre For use with single T26 luminaires PR� HLW PF 1x36 3.1 9650�808PR� HLW PF 1x58 4 9650�809 For use with twin T26 luminaires PR� HLW PF �x36 5.3 9650�810PR� HLW PF �x58 6.1 9650�811 For use with single or twin T16 luminaires PR� HLW PF 1/�x�8/54 �.4 9650�81�PR� HLW PF 1/�x35/49/80 �.8 9650�813

Step 4

www.suntrade.co

m.ua

66

113

51

67

113

51

66

113

51

66

113

51

�83

95

51

173

95

51

173

95

51

�83

95

51

173

95

51

�83

95

51

�7

T16 white louvre single

T16 perforated and white perforated louvre single or twin

T16 Satinbrite louvre, single or twin

T16 Mirrorbrite louvre, single or twin

T26 white or perforated housing with white or perforated louvre, single

T26 white or perforated housing with white or perforated louvre, twin

T26 Satinbrite louvre single

T26 Satinbrite louvre twin

T26 Mirrorbrite louvre single

T26 Mirrorbrite louvre twinwww.suntrade.co

m.ua

�8

Basic housings accessories

Coupler for basic housing optics

• White plastic coupler for all basic housing optics to provide neat appearance and perfect alignment


• One pair needed per junction

End cap for basic housing optics

• White plastic end caps for all basic housing optics to provide neat appearance and perfect alignment


• One pair needed per housing or uninterrupted continuous run

Basic housing accessories Ordering Guide (for complete luminaire follow ordering steps 1-5) Description SAP Code Coupler for all basic housing optics (one pair needed per junction) For use with single T26 versions PR� H-C 1xT�6 Pair 9650�849 For use with twin T26 versions PR� H-C �xT�6 Pair 9650�850 For use with single or twin T16 versions PR� H-C 1/�xT16 Pair 9650�851 Endcaps for all basic housing optics (one pair needed per housing or uninterrupted continuous run) For use with single T26 versions PR� H-EC 1xT�6 Pair 9650�85� For use with twin T26 versions PR� H-EC �xT�6 Pair 9650�853 For use with single or twin T16 versions PR� H-EC 1/�xT16 Pair 9650�854

Step 4

www.suntrade.co

m.ua

�9

www.suntrade.co

m.ua

Optional extras

96

75

51

96

75

51

�05

75

51

1175/1475 - T16 1226/1526 - T26

570/760

T26 wire guard, single

T26 wire guard, twin

T16 Wire guard, single/twin

30

Spotlight modules

• Module with integrated three-phase track in modular lengths

• Standard spotlights for three-phase track can be installed

• Simple phase selection for power supply


• Thorn turnbuckles for one-step electrical and mechanical connection

Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts

Installation/Mounting Module prepared for easy installation into pre-wired trunking, unit attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, spotlights to be installed as in any standard three-phase track system

Specification To specify state: three-phase track module in modular lengths, for use on 5, 7 or 9-pole trunking system. As Thorn Primata II TM

Fixing kit for fluorescent fittings

• Fixing kit for other fluorescent fittings on unwired trunking (FF)

Wire guard

• Suitable for T16 and T�6 single and twin lamp luminaires

• Can be hinged for lamp replacement

• For mechanical lamp protection – ideal in low storage areas

Materials/Finish Rods: polished galvanised steel Fixing brackets: aluminium

Installation/Mounting Tool-free fixing via two aluminium brackets

Specification To specify state: Wire guard made of polished galvanised steel for single/twin T16 and T�6 luminaires for use with trunking system. As Thorn Primata II WG

Spotlight not supplied

www.suntrade.co

m.ua

288

74

90

167

240

99

51

Step 5

Industrial Optic Ordering Guide complete fitting - no separate luminaire required. T�6 Lamps to be ordered separately.Description Ilcos Socket Wt (Kg) SAP Code Code Symmetric PR� I PC 1x58W HF SYM IP60 FD G13 7.9 9650�8�6 PR� I PC �x58W HF SYM IP60 FD G13 8.� 9650�8�8 Asymmetric PR� I PC �x58W HF ASYM IP60 FD G13 7.9 9650�8�9 PR� I PC 1x58W HF ASYM IP60 FD G13 8.� 9650�8�7

31

Presence detector module

• Module with an integrated presence detector

• Switching capacity 1�00 - �000W

• Surveillance range: ��0°

• Max Distance: 16 metres

• 6 time stages from 1sec. up to approx. 8mins.


Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts

Installation/Mounting Module prepared for easy installation onto trunking, electrical connection via piano key terminal block

Specification To specify state: Presence detection module for use on trunking system. As Thorn Primata II SLDP

Industrial unit IP60

• Complete single or twin 58W fitting (no separate luminaire needs to be ordered)

• High-frequency ballasts

• Integrated aluminium reflector for symmetrical or asymmetrical distribution

• IP60 (dust-tight) protected lamp/reflector area to avoid a decrease in LOR due to dust

• Convenient tool-free phase selection

• Plastic cover panel (PC) held by galvanised frame

• One-step electrical and mechanical connection via external turnbuckle

• Ideal solution for dusty industrial applications and automotive industry

Materials/Finish Housing: white painted sheet steel with plastic cover panel (polycarbonate) held by galvanised metal frame

Installation/Mounting Tool-free installation onto trunking system via external turnbuckle mechanism

Specification To specify state: Complete 1/�x58W luminaire, high frequency ballast, IP60, integrated aluminium reflector for symmetrical/asymmetrical distribution, polycarbonate cover panel held by galvanised frame for tool-free installation for use with trunking system. As Thorn Primata II I PC

Optional Extras Ordering Guide (for complete luminaire follow ordering steps 1-5) Description Wt (Kg) SAP Code Wire Guards For use with single T26 luminaires PR� WG 1x36 1.1 9650�838 PR� WG 1x58 1.5 9650�839 For use with twin T26 luminaires PR� WG �x36 1.7 9650�840 PR� WG �x58 1.9 9650�841 For use with single or twin T16 luminaires PR� WG 1/�x�8/54 1 9650�84� PR� WG 1/�x35/49/80 1.4 9650�843

Description Wt (Kg) SAP Code Spotlight modules 3-phase module 1��6 PR� TM 36 1.� 9650�631 3-phase module 15�6 PR� TM 58 1.5 9650�671 3-phase module 1175 PR� TM �8/54 1.1 9650�633 3-phase module 1475 PR� TM 35/49/80 1.4 9650�67�

Presence detector module PR� SLDP 0.7 9650�673 Fixing kit for other fluorescent fittings PR� FF 9650�667

4 00

2 4 6 8 10 12 14 16m

m

1.2m

2.5

www.suntrade.co

m.ua

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2Lamp: 1x 35W T16ULOR: 0.23 DLOR: 0.75 LOR: 0.99

180 120 60

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HWBLamp: 1x 35W T16ULOR: 0.0 DLOR: 0.85 LOR: 0.85

300 200 100

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+RALamp: 1x 35W T16ULOR: 0.18 DLOR: 0.75 LOR: 0.93

300 200 100

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HLW PFLamp: 1x 35W T16ULOR: 0.12 DLOR: 0.72 LOR: 0.84

300 200 100

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+RLamp: 1x 35W T16ULOR: 0.0 DLOR: 0.99 LOR: 0.99

300 200 100

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HLM Lamp: 1x 35W T16ULOR: 0.0 DLOR: 0.76 LOR: 0.76

450 300 150

Primata II PR2 Lamp: 1x 35W T16 ULOR: 0.�3 DLOR: 0.75 LOR: 0.99

Primata II PR2+RA Lamp: 1x 35W T16 ULOR: 0.18 DLOR: 0.75 LOR: 0.93

Primata II PR2+HWB Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.85 LOR: 0.85

Primata II PR2+HLW PF Lamp: 1x 35W T16 ULOR: 0.1� DLOR: 0.7� LOR: 0.84

T16 Luminaires

Primata II PR2 Lamp: �x 35W T16 ULOR: 0.�� DLOR: 0.75 LOR: 0.97

Primata II PR2+R Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.99 LOR: 0.99

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°


300 200 100

Primata II PR2+RLW Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.9 LOR: 0.9

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+WBLamp: 1x 35W T16ULOR: 0.0 DLOR: 1.03 LOR: 1.04

450 300 150

Primata II PR2+WB Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 1.03 LOR: 1.04

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+NBLamp: 1x 35W T16ULOR: 0.0 DLOR: 0.99 LOR: 0.99

450 300 150

Primata II PR2+NB Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.99 LOR: 0.99

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+WALamp: 1x 35W T16ULOR: 0.0 DLOR: 1.02 LOR: 1.02

750 500 250

Primata II PR2+WA Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 1.0� LOR: 1.0�

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HLSLamp: 1x 35W T16ULOR: 0.0 DLOR: 0.74 LOR: 0.74

300 200 100

Primata II PR2+HLS Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.74 LOR: 0.74

Primata II PR2+HLM Lamp: 1x 35W T16 ULOR: 0.0 DLOR: 0.76 LOR: 0.76

3�

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2 Lamp: 2x 35W T16ULOR: 0.22 DLOR: 0.75 LOR: 0.97

180 120 60

Photometric data

www.suntrade.co

m.ua

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°


120 80 40

Primata II PR2 Lamp: 1x 58W T�6 ULOR: 0.�9 DLOR: 0.67 LOR: 0.96

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°


120 80 40

Primata II PR2 Lamp: �x 58W T�6 ULOR: 0.38 DLOR: 0.59 LOR: 0.97

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°


180 120 60

Primata II PR2+R Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.83 LOR: 0.83

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+RLW Lamp: 1x 58W T26ULOR: 0.0 DLOR: 0.73 LOR: 0.74

300 200 100

Primata II PR2+RLW Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.73 LOR: 0.74

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°


120 80 40

Primata II PR2+RA Lamp: 1x 58W T�6 ULOR: 0.19 DLOR: 0.63 LOR: 0.8�

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+WB Lamp: 1x 58W T26ULOR: 0.0 DLOR: 0.80 LOR: 0.80

300 200 100

Primata II PR2+WB Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.80 LOR: 0.80

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+NBLamp: 1x 58W T26ULOR: 0.0 DLOR: 0.83 LOR: 0.83

450 300 150

Primata II PR2+NB Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.83 LOR: 0.83

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+WA Lamp: 1x 58W T26ULOR: 0.0 DLOR: 0.87 LOR: 0.87

750 500 250

Primata II PR2+WA Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.87 LOR: 0.87

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HALamp: 1x 58W T26ULOR: 0.0 DLOR: 0.71 LOR: 0.71

450 300 150

Primata II PR2+HA Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.71 LOR: 0.71

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HADLamp: 2x 58W T26ULOR: 0.0 DLOR: 0.74 LOR: 0.74

300 200 100

Primata II PR2+HAD Lamp: �x 58W T�6 ULOR: 0.0 DLOR: 0.74 LOR: 0.74

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HLSLamp: 1x 58W T26ULOR: 0.0 DLOR: 0.60 LOR: 0.60

300 200 100

Primata II PR2+HLS Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.60 LOR: 0.60

cd/1000lm150°

120°

90° 90°

60°60°

30°0°

30°

120°

150°

Primata II PR2+HLMLamp: 1x 58W T26ULOR: 0.0 DLOR: 0.66 LOR: 0.66

300 200 100

Primata II PR2+HLM Lamp: 1x 58W T�6 ULOR: 0.0 DLOR: 0.66 LOR: 0.66

T26 Luminaires

33

www.suntrade.co

m.ua

Suspension bracketsSelect suspension brackets, which will be suitable for your application or building/installation environment. Turn to page 14 for Step 1 Ordering Guides.

Trunking and electrical connectionSelect trunking with 5, 7 or 9-pole wiring depending on which luminaire is to be used. Make sure the modularity of the trunking/wiring specified matches the luminaire. Specify all other accessories, which might be needed in conjunction with the trunking or wiring (couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for Step � Ordering Guides.

LuminairesSpecify the luminaire to go with the system, depending on the functionality (dimming, emergency) you need and wattage, which was considered when selecting the pre-wired trunking. If IP40 is required for the system, please select the correct IP40 kit. Turn to pages 18 and 19 for Step 3 Ordering Guides.

OpticsDepending on what kind of light distribution or level of glare control is required within the application, select the particular optic in the right wattage. Dedicated end caps and couplers to be specified as well. Turn to pages �0 - �9 for Step 4 Ordering Guides.

Optional ExtrasAdditional accessories such as spotlight modules or presence detectors can be specified as well. The only exception within the ordering process is the Industrial Optic IP60, where no separate luminaire or end caps etc. need to be specified (supplied as a complete fitting). Turn to pages 30 and 31 for Step 5 Ordering Guides.

www.suntrade.co

m.ua

T�6 Double sided asymmetric mirror twin

9650�800 – 801

T�6 Wide beam mirror single

9650�79� – 793

T�6 Wide beam mirror twin

9650�794 – 795

T�6 Asymmetric mirror single

9650�798 – 799

T�6 White louvresingle

9650�80� – 803

T�6 White louvretwin

9650�804 – 805

T�6 Perforated + white perforated louvre single

9650�808 – 809

T�6 Perforated + white perforated louvre twin

9650�810 – 811

T16 Single

9650�700 – 753

Direct ceiling installation

9650�601

Caddy clip

9650�60�

Chain suspensionbracket

9650�603

Adjustable chain suspension

9650�604

Suspension chain (per metre)

9650�605

Bracket for angled installation

9650�606

Wire suspension kits

9650�607– �09

Catenary wire suspension

9650�610

Pre-wired trunking

9650�611– 646

Un-wired trunking

9650�651– 653

Trunking end cap

9650�664

Trunking coupler

9650�654

Trunking coupler L

9650�655

Trunking coupler T

9650�656

Trunking coupler X

9650�657

T16 Twin T�6 Single

9650�674 – 703

T�6 Twin IP40 Kit T�6

9650�668

IP40 Kit T16

9650�669 – 670

T16 White asymmetricsingle/twin

9650�768 – 769

End caps

9650�846 – 847

Couplers

9650�844 – 845

T16 White + white louvres single/twin

9650�764 – 765

T16 White single or twin

9650�758 – 759

T16 Wide beam mirror single/twin

9650�796 – 797

T16 White louvre single/twin

9650�806 – 807

T16 Perforated + white perforated louvre single/twin

9650�81� – 813

T16 Satinbrite louvre single/twin

9650�8118 – 819

T16 Mirrorbrite louvre single/twin

9650�8�4 – 8�5

Couplers

9650�849 – 851

End caps

9650�846 – 847

Couplers

9650�844 – 845

T�6 White + white louvres twin

9650�76� – 763

T�6 White + white louvres single

9650�760 – 761

T�6 White twin

9650�756 – 757

T�6 White single

9650�754 – 755

Fixing kit for other fluorescent fittings

9650�667

Presence detector module

9650�673

Spotlight modules

9650�631/671/633/67�

T16 Wire guards

9650�84� – 43

Industrial optic IP60

9650�8�6 – 8�9

T�6 Wire guards

9650�838 – 41

Suspension brackets

Trunking and electrical connection

Luminaires

Optics

Optional extras

T16 Reflectors

T16 Basic housing

T�6 Reflectors

T�6 Basic housing

Step 1

Step 2

Step 3

Step 4

Step 5

www.suntrade.co

m.ua

T�6 Satinbrite louvre single

9650�8114 – 815

T�6 Satinbrite louvre twin

9650�8116 – 817

T�6 Mirrorbrite louvre single

9650�8�0 – 8�1

T�6 Mirrorbrite louvre twin

9650�8�� – 8�3

Grommet

9650�663

End caps

9650�85� – 854

End caps for RA

9650�848

Mains terminal block for dimming

9650�658– 660

T�6 White asymmetric single

9650�766 – 767

End caps for RA

9650�848

T16 Wide Beamsingle/twin

9650�774 – 775

Additional wiring

9650�647– 650

Cable cleat

9650�661

T16 Narrow Beamsingle/twin

9650�780 – 781

Couplers

9650�849 – 851

T16 Wallwashersingle/twin

9650�784 – 785

Cable clip

9650�66�

End caps

9650�85� – 854

T�6 Wide Beam single

9650�770 – 771

T�6 Wide Beamtwin

9650�77� – 773

T�6 Narrow Beam single

9650�776 – 777

T�6 Narrow Beam twin

9650�778 – 779

T�6 Wallwashersingle

9650�78� – 783

Cover Fillets

9650�643/65/45/66

www.suntrade.co

m.ua

Configuration sheet PHOTOCOPY BEFORE USE

Please keep this configuration sheet as the original base artwork for you to photocopy from.

Option: Option:

Product QtySAP Code

Suspension brackets

Trunking & electrical connection

Luminaires

Optics

Optional extras

Product QtySAP Code

Suspension brackets

Trunking & electrical connection

Luminaires

Optics

Optional extras

Step 1

Step 2

Step 3

Step 4

Step 5

Step 1

Step 2

Step 3

Step 4

Step 5

www.suntrade.co

m.ua

Lighting people and places

Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication No: 389 (INT) Publication Date: 03/07

Head OfficeThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 873� 9800Fax: (44) �0 873� 9801Website: www.thornlighting.com

AustraliaThorn Lighting Pty Limited 13 Cooper Street, P O Box 188, Smithfield, NSW �164, AustraliaTel: (61) � 9604 4300Fax: (61) � 9604 4588E-mail: [email protected]: www.thornlight.com.au

AustriaThorn Licht GmbH Donau-City-Straße 11, 1��0 Wien, AustriaTel: (43) 1 �0� 66 11Fax: (43) 1 �0� 66 11 1�E-mail: [email protected]

ChinaThorn Lighting (Guangzhou) Operations Ltd No.1� Lian Yun Road, Eastern Section, GETDD, Guangzhou 510760, ChinaTel: (86) �0 3��8 �706Fax: (86) �0 3��8 1777E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd 33� Hongqi Road, Tianjin 300190, ChinaTel: (86) �� 8369 �303Fax: (86) �� 8369 �30�E-mail: [email protected]

Czech RepublicThorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5Czech RepublicTel: (420) 224 315 252Fax: (420) 233 326 313E-mail: [email protected]: www.thornlight.cz

DenmarkThorn Lighting A/S Albuen 44, 6000 Kolding, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601Website: www.thornlight.dk

FranceThorn Europhane SA 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6�6�Fax: (33) 1 49 53 6�40Website: www.thorn.fr

Hong KongThorn Lighting (Hong Kong) Limited Unit 4301, Level 43, Tower 1, Metroplaza, ��3 Hing Fong Road, Kwai Chung, N.T., Hong Kong, ChinaTel: (85�) �578 4303Fax: (85�) �887 0�47E-mail: [email protected]: www.thorn.com.hk

IrelandThorn Lighting (Ireland) Limited 3�0 Harold’s Cross Road, Dublin 6W, IrelandTel: (353) 1 49�� 877Fax: (353) 1 49�� 7�4E-mail: [email protected]

ItalyThorn Europhane Spa Via G Di Vittorio, �, Cadriano di Granarolo, Bologna 40057, ItalyTel: (39) 051 763391Fax: (39) 051 763088E-mail: [email protected]: www.thornlighting.it

New ZealandThorn Lighting (NZ) Ltd 399 Rosebank Road, P O Box 71134, Rosebank, Auckland 7, New ZealandTel: (64) 9 8�8 7155Fax: (64) 9 8�8 7591

NorwayThorn Lighting ASIndustriveien 11, P O Box 63, Skytta 1483, NorwayTel: (47) 6706 ��33Fax: (47) 6706 0351E-mail: [email protected]

PolandThorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wrocław 50-513, PolandTel: (48) 71 7833 740Fax: (48) 71 3366 029E-mail: [email protected] Website: www.thornlight.pl

RussiaThorn Lighting Novoslobodskaya Str., �1, office 406 Business Center “Novoslobodskaya �1”, Moscow 1�7030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 4�E-mail: [email protected] Website: www.thorn.ru

Thorn Lighting Representative Office,1 Artilleriyskaya str., 1 BC ‘Europa House’, St Petersburg 191104, RussiaTel: (7) 81� 718 811�Fax: (7) 81� 718 8119E-mail: [email protected]: www.thorn.ru

SingaporeThorn Lighting (Singapore) Pte Ltd 5 Kaki Buki Crescent, 04-0� Koyotech Building, 416�38 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]: www.thornlight.com.sg

SwedenThorn Lighting ABIndustrigatan, Box 305, SE-�61 �3 Landskrona, SwedenTel: (46) 418 5�0 00Fax: (46) 418 �65 74E-mail: [email protected]: www.thornlight.se

Thorn Lighting Main OfficesUnited Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, PO Box 1�00, Deira, Dubai, UAETel: (971) 4 �940181Fax: (971) 4 �948838E-mail: [email protected]

Thorn Gulf LLC Al Shoala Building, Office 301/�, Block E, PO Box 1�00, Deira, Dubai, UAETel: (971) 4 �948938Fax: (971) 4 �948838E-mail: [email protected]

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 873� 9800Fax: (44) �0 873� 9801E-mail: [email protected]: www.thornlighting.co.uk

International SalesThorn Lighting Limited 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6�6�Fax: (33) 1 49 53 6�40

Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 873� 1915Fax: (44) �0 873� 1911E-mail: [email protected]

www.thornlighting.com

www.suntrade.co

m.ua

Distinctive appearance and striking performance Rivers

www.suntrade.co

m.ua

0202

Rivers

AMAZONTHAMESSEINEDANUBELOIRE

www.suntrade.co

m.ua

03

The Rivers range satisfies theincreasing demand for secondarylighting systems to provide visualrelief. The distinctive productdesigns add a modern touch andenhance the lit environment.This extensive collection catersfor all solutions, providing choiceand flexibility

• A range of unique diffusers ina variety of materials (glass,polycarbonate) and finishes(opal, prismatic)

• Striking bezel options – visor and grille

• A variety of colours (white,black, silver, satin chrome,anthracite) and round andsquare shapes

• Ideal for use in manyapplications including entrance hall, receptions,stairwells, corridors, circulationroutes, rest areas, and buildingsurrounds

• Large choice of lamp and gear variants

Rivers is a unique collection of 5 contemporaryluminaire ranges, including wall and ceilingmounted versions with each range designed to offerdistinctive appearance and striking performance

s

www.suntrade.co

m.ua

1. The Quick Fix Wall and CeilingBracket (QFB) simplifiesinstallation to make it quickand easy, as the bracket canbe pre-wired and mounted,without having to install thecomplete luminaire.

2. The unique ‘light box’ plugand play concept providesprotection for the luminaireduring the installation andensures quick connection tothe QFB

3. The QFB has been designedwith a locking device, toallow the light box to beeasily removed from the QFBfor safe maintenance(electrically disconnected).

A simple fastening mechanismallows easy access into thelight box for maintenance.

The collection incorporates manyfeatures which simplify theinstallation process also makingthe product easily accessible for maintenance

04

Rivers

www.suntrade.co

m.ua

05

1. 2.

3.

www.suntrade.co

m.ua


06

Amazon has a strikingcontemporary form, created by twin structural bridgesbetween the elements of the cast aluminium bezel. The diffuser is encircled andspills light onto the mountingsurface in a directional halo.

seine

thamesamazon

danube

loire

ApplicationsAmazon is ideal to coordinateexterior (IP65) building surroundswith interior entrance halls orcirculation areas.

www.suntrade.co

m.ua

• Aluminium body providingstrength and rigidity

• A choice of two sizes in acircular or square design

• Striking opal polycarbonatediffuser

• Floating halo lighting effect

• Die-cast aluminium bezelavailable in white, silver oranthracite, to suit application

• Integral 3 hour maintainedemergency versions, suitablefor escape routes

• Large choice of compactfluorescent and T5 circularlamps

• Available with Electronic andElectronic Digital Dimmingballast

• Quick Fix Bracket supplied forsafe and quick installation

Lamps9W, TC-SEL (FSD) compact

fluorescent. Cap: 2G718W, TC-DEL (FSD) compact

fluorescent. Cap: G24q-226W, TC-DEL (FSQ) compact

fluorescent. Cap: G24q-316, 28, 38W, TC-DDEL

(FSS) compact fluorescent.Cap: GR10q

40, 55W, T16-R (FSC)circular fluorescent. Cap: 2GX13

Materials/FinishBody: die-cast aluminiumBezel: die-cast aluminium, silver,anthracite, and white finishDiffuser: opal polycarbonate

Installation/MountingSuitable for surface mounting onwall or ceiling for both interiorand exterior use. ‘Quick FixBracket’ (QFB) screw fixed ontomounting surface by 4 oblongholes (4.5mm x 10mm). Mainconnection via 6 way connectingblock. ‘Light Box’ direct and auto-connected to the QFB. For loop wiring a double 20mmcable entry holes to rear of QFB.

StandardsDesigned and manufactured tocomply with EN60598, EN55015:2000 (EMC). Emergency versionwith EN60598-2.22.

Class1 Electrical IP65

SpecificationTo specify state:Striking circular or squareluminaire for 9W/TC-SEL, 18,26W/TC-DEL, 16, 28,38W/TC-DDEL compactfluorescent, 40, 55W/T16-Rcircular fluorescent lampswith die-cast aluminium‘floating Halo’ and double ringmounting and twin bridge withopal polycarbonate diffusermounted to a die-cast aluminiumbody, with lamp and electronic,electronic dimmable, integralemergency gear, connectedto Quick Fix Wall andCeiling Bracket.As Thorn Amazon.

07

Silver Anthracite

www.suntrade.co

m.ua


08

Thames has a concave diffuserface and tapered sides, whichcreate a unique and distinctiveappearance. Backlightinggenerates a floating halo effect.

seine

thamesamazon

danube

loire

ApplicationsThames circular and squareshaped design together withhigh quality finish offers over 80variants to suit interior corridorsand entrance hall applications.

The floating halo light effectreduces light contrast betweenthe luminaire and the mountingsurface to improve lightingcomfort.

www.suntrade.co

m.ua



• Characteristic concave opalpolycarbonate diffuser

• Floating halo lighting effect

• Metallic bezel available inwhite, silver or satin chrome,to suit application


• Large choice of compactfluorescent and T5 Circularlamps

• Available with Magnetic,Electronic and ElectronicDigital Dimming ballast


Lamps9W, TC-S (FSD) compact

fluorescent. Cap: G239W, TC-SEL (FSD) compact

fluorescent. Cap: 2G718W, TC-DEL (FSD) compact

fluorescent. Cap: G24q-226W, TC-DEL (FSQ) compact

fluorescent. Cap: G24q-316W, TC-DD (FSS) compact

fluorescent. Cap: GR816, 28, 38W, TC-DDEL

(FSS) compact fluorescent.Cap: GR10q


Materials/FinishBody: die-cast aluminiumBezel: steel, silver, satin chromeand white finish Diffuser: opal polycarbonate

Installation/MountingSuitable for surface mounting onwall or ceiling for both interior orexterior use. ‘Quick Fix Bracket’(QFB) screw fixed onto mountingsurface by 4 oblong holes(4.5mm x 10mm). Mainconnection via 6 way connectingblock. ‘Light Box’ direct and auto-connected to the QFB. Forloop wiring a double 20mmcable entry holes to rear of QFB.

StandardsDesigned and manufactured tocomply with EN60598, EN55015:2000 (EMC). Emergency versionwith EN60598 (2.22).

Class 1 Electrical IP44

SpecificationTo Specify state:Unique and distinctive circular orsquare luminaire for 9W/TC-S,9W/TC-SEL, 18, 26W/TC-DEL,16/TC-DD, 16, 28, 38W/TC-DDEL compact fluorescent, 40,55W/T16-R circular fluorescentwith an acute angular steel bezel‘floating Halo’ with concave opalpolycarbonate diffuser mountedon a die-cast aluminium body,with lamp and electronic,electronic dimmable, integralemergency gear, connectedto Quick Fix Wall andCeiling Bracket.As Thorn Thames.

09

White Satin Chrome

www.suntrade.co

m.ua


10

seine

thamesamazon

danube

loire

Seine has clean edgescombined with a smooth fronteddiffuser, designed in glass for aclassical appearance, with a contemporary feel.

ApplicationsThe unique ‘cushion’ designdiffuses an evenly distrubutedcomfortable lighting effect andhas a modern appearance whenunlit for executive offices,corridors and meeting rooms,also hotel receptions andcirculation areas.

www.suntrade.co

m.ua



• Distinctive ‘cushion’ shapeopal glass diffuser providingsmooth diffused light

• Aesthetic appeal both litand unlit

• Unique floating halolighting effect


• Large choice of incandescent,compact fluorescent and T5circular lamps

• Available with Electronicand Electronic DigitalDimming ballast


Lamps40, 60W, A/c (IA/c)

Edison screw incandescent.Cap: E27

9W, TC-SEL (FSD) compactfluorescent. Cap: 2G7

18W, TC-DEL (FSD) compactfluorescent. Cap: G24q-2

26W, TC-DEL (FSQ) compactfluorescent. Cap: G24q-3

16, 28, 38W, TC-DDEL(FSS) compact fluorescent.Cap: GR10q


Materials/FinishBody: die-cast aluminium withpolycarbonate fixationDiffuser: opal glass

Installation/MountingSuitable for surface mounting onwall or ceiling for interior use.‘Quick Fix Bracket’ (QFB) screwfixed onto mounting surface by4 oblong holes (4.5mm x10mm). Main connection via 6way connecting block.‘Light Box’ direct and auto-connected to the QFB. For loopwiring a double 20mm cableentry holes to rear of QFB.

StandardsDesigned and manufactured tocomply with EN60598,EN55015:2000 (EMC).Emergency version withEN60598-2.22.

Class1 Electrical. IP20

SpecificationTo specify state:Classic circular or squareluminaire for 40, 60W/A/cEdison screw incandescent,9W/TC-SEL, 18, 26W/TC-DEL,16, 28, 38W/TC-DDEL compactfluorescent, 40, 55W/T16-Rcircular fluorescent lamps with‘Floating curved cushion’backlighting ‘Halo’, opal glassdiffuser with lamp and electronic,electronic dimmable, integralemergency gear, connected toQuick Fix Wall and Ceiling Bracket.As Thorn Seine.

11

www.suntrade.co

m.ua


12

Danube utilises a flat frontdiffuser and bold flared sides tocreate a low profile luminaire.A range of versatile overlay bezelscan alter the character to suit awide range of environments.

seine

thamesamazon

danube

loireApplicationsThe 250 Danube variants coverthe widest range of applicationsfrom interior ancillary rooms(prismatic diffuser) and publiccirculation areas to buildingsurrounds using the same productfamily differentiated by the shape(round or square), the bezel orthe colour.

www.suntrade.co

m.ua


• Flat fronted opal or clearprismatic polycarbonatediffuser

• Available in black or white tosuit application

• Grille and visor versionsavailable for aestheticappearance


• Large choice of compactfluorescent and T5 Circularlamps

• Available with Magnetic,Electronic and ElectronicDigital Dimming ballast(Digital dimming versionsavailable to order)

• IP65 for exterior installations


Lamps9W, TC-S (FSD) compact

fluorescent. Cap: G239W, TC-SEL (FSD) compact

fluorescent. Cap: 2G718W, TC-D (FSD) compact

fluorescent. Cap: G24d-218W, TC-DEL (FSD) compact

fluorescent. Cap: G24q-226W, TC-D (FSQ) compact

fluorescent. Cap: G24d-326W, TC-DEL (FSQ)

compact fluorescent. Cap: G24q-3

16, 28W, TC-DD (FSS)compact fluorescent. Cap: GR8


40W, T16-R (FSC) circularfluorescent. Cap: 2GX13

Materials/FinishBody: polycarbonateDiffuser: opal polycarbonate orclear prismatic polycarbonateBezel, visor and grille:polycarbonate, white or black finish

Installation/MountingSuitable for surface mounting onwall or ceiling for both interiorand exterior use. ‘Quick FixBracket’ (QFB) screw fixed ontomounting surface by 4 oblongholes (4.5mm x 10mm). Mainconnection via 6 way connectingblock. ‘Light Box’ direct and auto-connected to the QFB. Forloop wiring a double 20mmcable entry holes to rear of QFB.

StandardsDesigned and manufactured tocomply with EN60598, EN55015:2000 (EMC). Emergency versionwith EN60598-2.22.

Class I Electrical –All electronic versions

Class II Electrical –Incandescent and magneticversions

IP65

SpecificationTo specify state:Bold and versatile circular orsquare luminaire for 9W/TC-S,9W/TC-SEL, 18, 26W/TC-D,18, 26W/TC-DEL, 16, 28W/TC-DD, 16, 28, 38W/TC-DDEL,compact fluorescent, 40W/T16-Rcircular fluorescent lamps withpolycarbonate body, ‘flat’ opaland prismatic diffuser withstandard, grille or visor bezels incolour with lamp, magnetic,electronic, electronic dimmableand integral emergency gear,connected to Quick Fix Walland Ceiling Bracket.As Thorn Danube.

13

www.suntrade.co

m.ua


14

Loire has a fresh design with acontemporary feel, the diffusersare in glass or polycarbonate.While Loire has a subtle bezel, it can be given a more strikingappearance by way of boldgrille and visor options.

seine

thamesamazon

danube

loire

ApplicationsA secure fitting using tamperresistant screws for public interiorand exterior (IP65) circulationareas including stairwells,corridors and store rooms.

www.suntrade.co

m.ua

• Available in two sizes in acircular design, to suitapplication

• Contemporary dome shapeopal polycarbonate or glassdiffuser

• Available in black or white tosuit environment

• Grille and visor versionsavailable for an aestheticappearance


• Large choice of incandescent,compact fluorescent and T5circular lamps

• Available with Magneticand Electronic ballast (Digitaldimming versions availableto order)

• IP65 for exterior installations

• Tamper resistant screw deviceto protect installations


Lamps40, 60, 75,100W, A/c

(IA/c) Edison screwincandescent. Cap: E27

9W, TC-S (FSD) compactfluorescent. Cap: G23

9W, TC-SEL (FSD) compactfluorescent. Cap: 2G7

18W, TC-D (FSD) compactfluorescent. Cap: G24d-2

18W, TC-DEL (FSD) compactfluorescent. Cap: G24q-2

16, 28W, TC-DD (FSS)compact fluorescent. Cap: GR8


Materials/FinishBody: polycarbonateBezel, grille and visor:polycarbonate, white or black finishDiffuser: opal polycarbonateor glass

Installation/MountingSuitable for surface mounting onwall or ceiling for both interior orexterior use. ‘Quick Fix Bracket’(QFB) screw fixed onto mountingsurface by 4 oblong holes(4.5mm x 10mm). Mainconnection via 6 way connectingblock. ‘Light Box’ direct and auto-connected to the QFB. Forloop wiring a double 20mmcable entry holes to rear of QFB.

StandardsDesigned and manufactured tocomply with EN60598, EN55015:2000 (EMC). Emergency versionswith EN60598-2.22.

Class I Electrical –All electronic versions

Class II Electrical –Incandescent and magnetic versions

IP65

SpecificationTo specify state:Fresh and contemporarycircular luminaire for 40, 60,75, 100W/A/c Edison screwincandescent, 9W/TC-S,9W/TC-SEL, 18W/TC-D,18W/TC-DEL, 16, 28W/TC-DD,16, 28, 38W/TC-DDEL compactfluorescent lamps withpolycarbonate body and opaldiffuser in either glass orpolycarbonate with standard,grille or visor bezels in colourwith lamp, magnetic, electronic,integral emergency gear,connected to Quick Fix Walland Ceiling Bracket.As Thorn Loire.

15

www.suntrade.co

m.ua

16

www.suntrade.co

m.ua

17

8677

Ø 425.2

Ø 304

86

422.5

77 7970.1

Ø 295.2

Ø 198.8

292.6

7970.1

DimensionsPhotometric dataOrdering guide

Square, silverRound, anthraciteRound, white

Quick Fix Bracket

Amazon square opalLamp: 1x28W TC-DDULOR: 0.06 DLOR: 0.40 LOR: 0.46SHR max: 1.73

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

Amazon round opalLamp: 1x28W TC-DDULOR: 0.05 DLOR: 0.39 LOR: 0.44SHR max: 1.74

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

Ordering Guide Supplied complete with Quick Fix Bracket and lamp(s) 4000K

Description Ilcos Socket Weight SAP CodeCode (Kg) White Silver Anthracite

Round smallAM 2X9W TC-SEL HF RD S FSD 2G7 1.45 96226945 96226946 96226947AM 1X16W TC-DDEL HF RD S FSS GR10q 1.5 96226987 96226988 96226989

Square smallAM 2X9W TC-SEL HF SQ S FSD 2G7 1.5 96226948 96226949 96226950AM 1X16W TC-DDEL HF SQ S FSS GR10q 1.55 96226990 96226991 96226992

Round largeAM 2X18W TC-DEL HF RD L FSD G24q-2 2.85 96226951 96226953 96226955AM 2X18W TC-DEL HFD RD L FSD G24q-2 2.85 96226952 96226954 96226956AM 2X26W TC-DEL HF RD L FSD G24q-3 2.9 96226969 96226971 96226973AM 2X26W TC-DEL HFD RD L FSD G24q-3 2.9 96226970 96226972 96226974AM 1X28W TC-DDEL HF RD L FSS GR10q 2.65 96226993 96226994 96226995AM 1X38W TC-DDEL HF RD L FSS GR10q 2.8 96227005 96227006 96227007AM 1X40W T16-R HF RD L FSC 2GX13 2.4 96226981 96226983 96226985AM 1X40W T16-R HFD RD L FSC 2GX13 2.4 96226982 96226984 96226986AM 1X55W T16-R HF RD L FSC 2GX13 2.4 96227017 96227019 96227021AM 1X55W T16-R HFD RD L FSC 2GX13 2.4 96227018 96227020 96227022

Round large - emergency versionsAM 2X18W TC-DEL HF E3 RD L FSD G24q-2 3.5 96226963 96226964 96226965AM 1X28W TC-DDEL HF E3 RD L FSS GR10q 3.4 96226999 96227000 96227001AM 1X38W TC-DDEL HF E3 RD L FSS GR10q 3.6 96227011 96227012 96227013

Square largeAM 2X18W TC-DEL HF SQ L FSD G24q-2 3 96226957 96226959 96226961AM 2X18W TC-DEL HFD SQ L FSD G24q-2 3 96226958 96226960 96226962AM 2X26W TC-DEL HF SQ L FSD G24q-3 3.05 96226975 96226977 96226979AM 2X26W TC-DEL HFD SQ L FSD G24q-3 3.05 96226976 96226978 96226980AM 1X28W TC-DDEL HF SQ L FSS GR10q 2.8 96226996 96226997 96226998AM 1X38W TC-DDEL HF SQ L FSS GR10q 2.95 96227008 96227009 96227010

Square large - emergency versionsAM 2X18W TC-DEL HF SQ L FSD G24q-2 3.5 96226966 96226967 96226968AM 1X28W TC-DDEL HF E3 SQ L FSS GR10q 3.6 96227002 96227003 96227004AM 1X38W TC-DDEL HF E3 SQ L FSS GR10q 3.7 96227014 96227015 96227016HF - High Frequency, HFD - High Frequency Dimmable Digital

Amazon

97Fixing Centres

118

100Fixing Centres

130

www.suntrade.co

m.ua

18


425

81.7

295

78.5 82

Ø 425

Ø 308.1

78.5

Ø 295

Ø 208.2

Round, whiteSquare, white Round, satin chrome

Thames square opalLamp: 1x28W TC-DDULOR: 0.04 DLOR: 0.44 LOR: 0.48SHR max: 1.64

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

Thames round opalLamp: 1x28W TC-DDULOR: 0.05 DLOR: 0.41 LOR: 0.46SHR max: 1.64

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/


Description Ilcos Socket Weight SAP Code SatinCode (Kg) White Silver Chrome

Round smallTH 2X9W TC-SEL HF RD S FSD 2G7 1.65 96226831 96226832 96226833TH 2X9W TC-S NC RD S FSD G23 1.95 96226834 96226835 96226836TH 1X16W TC-DDEL HF RD S FSS GR10q 1.70 96226879 96226880 96226881TH 1X16W TC-DD NC RD S FSS GR8 2 96226882 96226883 96226884

Square smallTH 2X9W TC-SEL HF SQ S FSD 2G7 1.7 96226837 96226838 96226839TH 2X9W TC-S NC SQ S FSD G23 2 96226840 96226841 96226842TH 1X16W TC-DDEL HF SQ S FSS GR10q 1.75 96226885 96226886 96226887TH 1X16W TC-DD NC RD S FSS GR8 2.05 96226888 96226889 96226890

Round largeTH 2X18W TC-DEL HF RD L FSD G24q-2 3.15 96226843 96226845 96226847TH 2X18W TC-DEL HFD RD L FSD G24q-2 3.15 96226844 96226846 96226848TH 2X26W TC-DEL HF RD L FSQ G24q-3 3.2 96226861 96226863 96226865TH 2X26W TC-DEL HFD RD L FSQ G24q-3 3.2 96226862 96226864 96226866TH 1X28W TC-DDEL HF RD L FSS GR10q 2.9 96226891 96226892 96226893TH 1X38W TC-DDEL HF RD L FSS GR10q 3.05 96226903 96226904 96226905TH 1X40W T16-R HF RD L FSC 2GX13 2.7 96226873 96226875 96226877TH 1X40W T16-R HFD RD L FSC 2GX13 2.7 96226874 96226876 96226878TH 1X55W T16-R HF RD L FSC 2GX13 2.7 96228869 96228871 96228873TH 1X55W T16-R HFD RD L FSC 2GX13 2.7 96228870 96228872 96228874

Round large - emergency versionsTH 2X18W TC-DEL HF E3 RD L FSD G24q-2 3.7 96226855 96226856 96226857TH 1X28W TC-DDEL HF E3 RD L FSS GR10q 3.7 96226897 96226898 96226899TH 1X38W TC-DDEL HF E3 RD L FSS GR10q 3.7 96226909 96226910 96226911

Square largeTH 2X18W TC-DEL HF SQ L FSD G24q-2 3.35 96226849 96226851 96226853TH 2X18W TC-DEL HFD SQ L FSD G24q-2 3.35 96226850 96226852 96226854TH 2X26W TC-DEL HF SQ L FSQ G24q-3 3.4 96226867 96226869 96226871TH 2X26W TC-DEL HFD SQ L FSQ G24q-3 3.4 96226868 96226870 96226872TH 1X28W TC-DDEL HF SQ L FSS GR10q 3.1 96226894 96226895 96226896TH 1X38W TC-DDEL HF SQ L FSS GR10q 3.3 96226906 96226907 96226908

Square large - emergency versionsTH 2X18W TC-DEL HF E3 SQ L FSD G24q-2 4.0 96226858 96226859 96226860TH 1X28W TC-DDEL HF E3 SQ L FSS GR10q 4.0 96226900 96226901 96226902TH 1X38W TC-DDEL HF E3 SQ L FSS GR10q 4.0 96226912 96226913 96226914HF - High Frequency, NC - Magnetic (not compensated), HFD - High Frequency Dimmable Digital

Thames

97Fixing Centres

118

100Fixing Centres

130

Quick Fix Bracket www

.suntrade.co

m.ua

19

Large, round

Seine round glassLamp: 1x16W TC-DDULOR: 0.14 DLOR: 0.46 LOR: 0.60SHR max: 1.73

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

Seine round glassLamp: 1x28W TC-DDULOR: 0.14 DLOR: 0.46 LOR: 0.60SHR max: 1.73

90°

30°°303 ° 000°

60660°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

390

114.4 103.5

260.5

Ø 400

113.2

Ø 270

103.6


Description Ilcos Socket Weight SAP CodeCode (Kg)

Round smallSE 1X40W A CL2 E27 RD S IA/C E27 2.9 96226915SE 1X60W A CL2 E27 RD S IA/C E27 2.9 96226917SE 2X9W TC-SEL HF RD S FSD 2G7 2.7 96226919SE 1X16W TC-DDEL HF RD S FSS GR10q 2.9 96226935

Square smallSE 1X40W A CL2 E27 SQ S IA/C E27 2.9 96226916SE 1X60W A CL2 E27 SQ S IA/C E27 2.9 96226918SE 2X9W TC-SEL HF SQ S FSD 2G7 2.7 96226920SE 1X16W TC-DDEL HF SQ S FSS GR10q 2.9 96226936

Round largeSE 2X18W TC-DEL HF RD L FSD G24q-2 4.6 96226921SE 2X18W TC-DEL HFD RD L FSD G24q-2 4.6 96226922SE 2X26W TC-DEL HF RD L FSQ G24q-3 4.85 96226927SE 2X26W TC-DEL HFD RD L FSQ G24q-3 4.85 96226928SE 1X28W TC-DDEL HF RD L FSS GR10q 4.6 96226937SE 1X38W TC-DDEL HF RD L FSS GR10q 4.75 96226941SE 1X40W T16-R HF RD L FSC 2GX13 4.5 96226931SE 1X40W T16-R HFD RD L FSC 2GX13 4.5 96226932SE 1X55W T16-R HF RD L FSC 2GX13 4.5 96226933SE 1X55W T16-R HFD RD L FSC 2GX13 4.5 96226934

Round large - emergency versionsSE 2X18W TC-DEL HF E3 RD L FSD G24q-2 5.4 96226925SE 1X28W TC-DDEL HF E3 RD L FSS GR10q 5.4 96226939SE 1X38W TC-DDEL HF E3 RD L FSS GR10q 5.4 96226943

Square largeSE 2X18W TC-DEL HF SQ L FSD G24q-2 5.05 96226923SE 2X18W TC-DEL HFD SQ L FSD G24q-2 5.05 96226924SE 2X26W TC-DEL HF SQ L FSQ G24q-3 5.05 96226929SE 2X26W TC-DEL HFD SQ L FSQ G24q-3 5.05 96226930SE 1X28W TC-DDEL HF SQ L FSS GR10q 4.8 96226938SE 1X38W TC-DDEL HF SQ L FSS GR10q 4.95 96226942

Square large - emergency versionsSE 2X18W TC-DEL HF E3 SQ L FSD G24q-2 5.6 96226926SE 1X28W TC-DDEL HF E3 SQ L FSS GR10q 5.6 96226940SE 1X38W TC-DDEL HF E3 SQ L FSS GR10q 5.6 96226944HF - High Frequency, HFD - High Frequency Dimmable Digital, CL2 - Class II Electrical

Seine

Large, square

97Fixing Centres

118

100Fixing Centres

130

Quick Fix Bracket www.suntrade.co

m.ua


20

Round, white Round with visor, black Round prismatic, black

Danube round opalLamp: 1x28W TC-DDULOR: 0.07 DLOR: 0.50 LOR: 0.57SHR max: 1.66

90°

30°°303 ° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm000/

Description Ilcos Socket Wt SAP CodeCode (Kg) Black White

Opal diffuser - round smallDA 2X9W TC-SEL HF CL1 OP RD S FSD 2G7 0.9 96218903 96218904DA 2X9W TC-S NC CL2 OP RD S FSD G23 1.2 96218905 96218906DA 1X16W TC-DDEL HF CL1 OP RD S FSS GR10q 0.95 96219039 96219040DA 1X16W TC-DD NC CL2 OP RD S FSS GR8 1.2 96219041 96219042

Opal diffuser with visor - round smallDA VIS 2X9W TC-SEL HF CL1 OP RD S FSD 2G7 1 96218911 96218912DA VIS 2X9W TC-S NC CL2 OP RD S FSD G23 1.3 96218913 96218914DA VIS 1X16W TC-DDEL HF CL1 OP RD S FSS GR10q 1.05 96219047 96219048DA VIS 1X16W TC-DD NC CL2 OP RD S FSS GR8 1.3 96219049 96219050

Opal diffuser with grille - round smallDA GRIL 2X9W TC-SEL HF CL1 OP RD S FSD 2G7 1 96218919 96218920DA GRIL 2X9W TC-S NC CL2 OP RD S FSD G23 1.3 96218921 96218922DA GRIL 1X16W TC-DDEL HF CL1 OP RD S FSS GR10q 1.05 96219055 96219056DA GRIL 1X16W TC-DD NC CL2 OP RD S FSS GR8 1.3 96219057 96219058

Prismatic diffuser - round smallDA 2X9W TC-SEL HF CL1 PR RD S FSD 2G7 0.9 96218927 96218928DA 2X9W TC-S NC CL2 PR RD S FSD G23 1.2 96218929 96218930DA 1X16W TC-DDEL HF CL1 PR RD S FSS GR10q 0.95 96219063 96219064DA 1X16W TC-DD NC CL2 PR RD S FSS GR8 1.2 96219065 96219066

Opal diffuser - square smallDA 2X9W TC-SEL HF CL1 OP SQ S FSD 2G7 0.9 96218907 96218908DA 2X9W TC-S NC CL2 OP SQ S FSD G23 1.2 96218909 96218910DA 1X16W TC-DDEL HF CL1 OP SQ S FSS GR10q 0.95 96219043 96219044DA 1X16W TC-DD NC CL2 OP SQ S FSS GR8 1.2 96219045 96219046

Opal diffuser with visor - square smallDA VIS 2X9W TC-SEL HF CL1 OP SQ S FSD 2G7 1 96218915 96218916DA VIS 2X9W TC-S NC CL2 OP SQ S FSD G23 1.3 96218917 96218918DA VIS 1X16W TC-DDEL HF CL1 OP SQ S FSS GR10q 1.05 96219051 96219052DA VIS 1X16W TC-DD NC CL2 OP SQ S FSS GR8 1.3 96219053 96219054

Opal diffuser with grille - square smallDA GRIL 2X9W TC-SEL HF CL1 OP SQ S FSD 2G7 1 96218923 96218924DA GRIL 2X9W TC-S NC CL2 OP SQ S FSD G23 1.3 96218925 96218926DA GRIL 1X16W TC-DDEL HF CL1 OP SQ S FSS GR10q 1.05 96219059 96219060DA GRIL 1X16W TC-DD NC CL2 OP SQ S FSS GR8 1.3 96219061 96219062


Prismatic diffuser- square smallDA 2X9W TC-SEL HF CL1 PR SQ S FSD 2G7 0.9 96218931 96218932DA 2X9W TC-S NC CL2 PR SQ S FSD G23 1.2 96218933 96218934DA 1X16W TC-DDEL HF CL1 PR SQ S FSS GR10q 0.95 96219067 96219068DA 1X16W TC-DD NC CL2 PR SQ S FSS GR8 1.2 96219069 96219070

Opal diffuser - round largeDA 2X18W TC-DEL HF CL1 OP RD L FSD G24q-2 2.1 96218935 96218936DA 2X18W TC-DEL HFD CL1 OP RD L FSD G24q-2 2.1 96218943 96218944DA 2X18W TC-D CP CL2 OP RD L FSD G24d-2 2.5 96218937 96218938DA 2X26W TC-DEL HFD CL1 OP RD L FSQ G24q-3 1.9 96219015 96219015DA 2X26W TC-DEL HF CL1 OP RD L FSQ G24q-3 1.9 96218983 96218984DA 2X26W TC-D CP CL2 OP RD L FSQ G24q-3 2.5 96218985 96218986DA 1X28W TC-DDEL HF CL1 OP RD L FSS GR10q 1.65 96219071 96219072DA 1X28W TC-DD CP CL2 OP RD L FSS GR8 2.05 96219073 96219074DA 1X38W TC-DDEL HF CL1 OP RD L FSS GR10q 1.8 96219119 96219120DA 1X40W T16-R HF CL1 OP RD L FSC 2GX13 1.65 96219031 96219032

Opal diffuser - round large - emergency versionsDA 1X28W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.5 96219103 96219104DA 1X38W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.5 96219135 96219136

Opal diffuser with visor - round largeDA VIS 2X18W TC-DEL HFD CL1 OP RD L FSD G24q-2 2.25 96218947 96218948DA VIS 2X18W TC-DEL HF CL1 OP RD L FSD G24q-2 2.25 96218959 96218960DA VIS 2X18W TC-D CP CL2 OP RD L FSD G24d-2 2.65 96218961 96218962DA VIS 2X26W TC-DEL HFD CL1 OP RD L FSQ G24q-3 2.05 96219019 96219020DA VIS 2X26W TC-DEL HF CL1 OP RD L FSQ G24q-3 2.05 96218991 96218992DA VIS 2X26W TC-D CP CL2 OP RD L FSQ G24d-3 2.65 96218993 96218994DA VIS 1X28W TC-DDEL HF CL1 OP RD L FSS GR10q 1.8 96219079 96219080DA VIS 1X28W TC-DD CP CL2 OP RD L FSS GR8 2.2 96219081 96219082DA VIS 1X38W TC-DDEL HF CL1 OP RD L FSS GR10q 1.95 96219123 96219124DA VIS 1X40W T16-R HF CL1 OP RD L FSC 2GX13 1.8 96219033 96219034

Opal diffuser with visor - round large - emergency versionsDA VIS 1X28W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.65 96219107 96219108DA VIS 1X38W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.65 96219139 96219140

Danube round prismaticLamp: 1x28W TC-DDULOR: 0.09 DLOR: 0.71 LOR: 0.80SHR max: 1.72

90°

300°°30° 000°°

606 °60°

90°

A

T

2000

1000

3000

cd/1000 lm0 0 d/

Danube round opal with visorLamp: 1x28W TC-DDULOR: 0.06 DLOR: 0.32 LOR: 0.38

90°

300°300°° 00°

6060°600°°

90°

AT 2000

1000

3000300

cd/1000 lm0 lmcdcd/1000 lm

Danube

97Fixing Centres

118

100Fixing Centres

130


Quick Fix Bracket

www.suntrade.co

m.ua


Opal diffuser with grille - round largeDA GRIL 2X18W TC-DEL HFD CL1 OP RD L FSD G24q-2 2.25 96218951 96218952DA GRIL 2X18W TC-DEL HF CL1 OP RD L FSD G24q-2 2.25 96218967 96218968DA GRIL 2X18W TC-D CP CL2 OP RD L FSD G24d-2 2.65 96218969 96218970DA GRIL 2X26W TC-DEL HF CL1 OP RD L FSQ G24q-3 2.05 96218999 96219000DA GRIL 2X26W TC-DEL HFD CL1 OP RD L FSQ G24q-3 2.05 96219023 96219024DA GRIL 2X26W TC-D CP CL2 OP RD L FSQ G24d-3 2.65 96219001 96219002DA GRIL 1X28W TC-DDEL HF CL1 OP RD L FSS GR10q 1.8 96219087 96219088DA GRIL 1X28W TC-DD CP CL2 OP RD L FSS GR8 2.2 96219089 96219090DA GRIL 1X38W TC-DDEL HF CL1 OP RD L FSS GR10q 1.95 96219127 96219128DA GRIL 1X40W T16-R HF CL1 OP RD L FSC 2GX13 1.8 96219035 96219036

Opal diffuser with grille - round large - emergency versionsDA GRIL 1X28W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.65 96219111 96219112DA GRIL 1X38W TC-DDEL HF CL1 E3 OP RD L FSS GR10q 2.65 96219143 96219144

Prismatic diffuser - round largeDA 2X18W TC-DEL HFD CL1 PR RD L FSD G24q-2 2.1 96218955 96218956DA 2X18W TC-DEL HF CL1 PR RD L FSD G24q-2 2.1 96218975 96218976DA 2X18W TC-D CP CL2 PR RD L FSD G24d-2 2.5 96218977 96218978DA 2X26W TC-DEL HF CL1 PR RD L FSQ G24q-3 1.9 96219007 96219008DA 2X26W TC-D CP CL2 PR RD L FSQ G24q-3 2.5 96219009 96219010DA 2X26W TC-DEL HFD CL1 PR RD L FSQ G24d-3 2.05 96219027 96219028DA 1X28W TC-DDEL HF CL1 PR RD L FSS GR10q 1.65 96219095 96219096DA 1X28W TC-DD CP CL2 PR RD L FSS GR8 2.05 96219097 96219098DA 1X38W TC-DDEL HF CL1 PR RD L FSS GR10q 1.8 96219131 96219132DA 1X40W T16-R HF CL1 PR RD L FSC 2GX13 1.65 96219037 96219038

Prismatic diffuser - round large - emergency versionsDA 1X28W TC-DDEL HF CL1 E3 PR RD L FSS GR10q 2.5 96219115 96219116DA 1X38W TC-DDEL HF CL1 E3 PR RD L FSS GR10q 2.5 96219147 96219148

Opal diffuser - square largeDA 2X18W TC-DEL HF CL1 OP SQ L FSD G24q-2 1.95 96218939 96218940DA 2X18W TC-DEL HFD CL1 OP SQ L FSD G24q-2 1.95 96218945 96218946DA 2X18W TC-D CP CL2 OP SQ L FSD G24d-2 2.5 96218941 96218942DA 2X26W TC-DEL HF CL1 OP SQ L FSQ G24q-3 1.95 96218987 96218988DA 2X26W TC-DEL HFD CL1 OP SQ L FSQ G24q-3 1.95 96219017 96219018DA 2X26W TC-D CP CL2 OP SQ L FSQ G24d-3 2.5 96218989 96218990DA 1X28W TC-DDEL HF CL1 OP SQ L FSS GR10q 1.7 96219075 96219076DA 1X28W TC-DD CP CL2 OP SQ L FSS GR8 2.1 96219077 96219078DA 1X38W TC-DDEL HF CL1 OP SQ L FSS GR10q 1.85 96219121 96219122

Opal diffuser - square large - emergency versionsDA 1X28W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.5 96219105 96219106DA 1X38W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.5 96219137 96219138

Opal diffuser with visor - square largeDA VIS 2X18W TC-DEL HFD CL1 OP SQ L FSD G24q-2 2.1 96218949 96218950DA VIS 2X18W TC-DEL HF CL1 OP SQ L FSD G24q-2 2.1 96218963 96218964DA VIS 2X18W TC-D CP CL2 OP SQ L FSD G24d-2 2.65 96218965 96218966DA VIS 2X26W TC-DEL HF CL1 OP SQ L FSQ G24q-3 2.1 96218995 96218996DA VIS 2X26W TC-DEL HFD CL1 OP SQ L FSQ G24q-3 2.1 96219021 96219022DA VIS 2X26W TC-D CP CL2 OP SQ L FSQ G24d-3 2.65 96218997 96218998DA VIS 1X28W TC-DDEL HF CL1 OP SQ L FSS GR10q 1.85 96219083 96219084DA VIS 1X28W TC-DD CP CL2 OP SQ L FSS GR8 2.25 96219085 96219086DA VIS 1X38W TC-DDEL HF CL1 OP SQ L FSS GR10q 2 96219125 96219126

Danube


Opal diffuser with visor - square large - emergency versionsDA VIS 1X28W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.65 96219109 96219110DA VIS 1X38W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.65 96219141 96219142

Opal diffuser with grille - square largeDA GRIL 2X18W TC-DEL HFD CL1 OP SQ L FSD G24q-2 2.1 96218953 96218954DA GRIL 2X18W TC-DEL HF CL1 OP SQ L FSD G24q-2 2.1 96218971 96218972DA GRIL 2X18W TC-D CP CL2 OP SQ L FSD G24d-2 2.65 96218973 96218974DA GRIL 2X26W TC-DEL HF CL1 OP SQ L FSQ G24q-3 2.1 96219003 96219004DA GRIL 2X26W TC-DEL HFD CL1 OP SQ L FSQ G24q-3 2.1 96219025 96219026DA GRIL 2X26W TC-D CP CL2 OP SQ L FSQ G24d-3 2.65 96219005 96219006DA GRIL 1X28W TC-DDEL HF CL1 OP SQ L FSS GR10q 1.85 96219091 96219092DA GRIL 1X28W TC-DD CP CL2 OP SQ L FSS GR8 2.25 96219093 96219094DA GRIL 1X38W TC-DDEL HF CL1 OP SQ L FSS GR10q 2 96219129 96219130

Opal diffuser with grille - square large - emergency versionsDA GRIL 1X28W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.65 96219113 96219114DA GRIL 1X38W TC-DDEL HF CL1 E3 OP SQ L FSS GR10q 2.65 96219145 96219146

Prismatic diffuser - square largeDA 2X18W TC-DEL HFD CL1 PR SQ L FSD G24q-2 1.95 96218957 96218958DA 2X18W TC-DEL HF CL1 PR SQ L FSD G24q-2 1.95 96218979 96218980DA 2X18W TC-D CP CL2 PR SQ L FSD G24d-2 2.5 96218981 96218982DA 2X26W TC-DEL HF CL1 PR SQ L FSQ G24q-3 1.95 96219011 96219012DA 2X26W TC-DEL HFD CL1 PR SQ L FSQ G24q-3 2.1 96219029 96219030DA 2X26W TC-D CP CL2 PR SQ L FSQ G24d-3 2.5 96219013 96219014DA 1X28W TC-DDEL HF CL1 PR SQ L FSS GR10q 1.7 96219099 96219100DA 1X28W TC-DD CP CL2 PR SQ L FSS GR8 2.1 96219101 96219102DA 1X38W TC-DDEL HF CL1 PR SQ L FSS GR10q 1.85 96219133 96219134

Prismatic diffuser - square large - emergency versionsDA 1X28W TC-DDEL HF CL1 E3 PR SQ L FSS GR10q 2.5 96219117 96219118DA 1X38W TC-DDEL HF CL1 E3 PR SQ L FSS GR10q 2.5 96219149 96219150HF - High Frequency, HFD - High Frequency Dimmable Digital, NC - Magnetic (not compensated), CP - Magnetic (parallel compensated),CL1 - Class I Electrical, CL2 - Class II Electrical

8154

Ø 414.7

Ø 336.4

73 47.7

Ø 284.7

Ø 226.4

411.4

8154

283.8

73 47.7

21


www.suntrade.co

m.ua


22

116

Ø 414.6

115.9

45.5

Ø 284.6

Round, white Round with visor, black

Loire round opalLamp: 1x28W TC-DDULOR: 0.07 DLOR: 0.50 LOR: 0.57SHR max: 1.66

90°

300°300° 00°

6060°600°°

90°

A

T

2000

1000

3000300

cd/1000 lm0 0 d/

Loire round opal with visorLamp: 1x28W TC-DDULOR: 0.06 DLOR: 0.32 LOR: 0.38

90°

3030°30° 00°

60°60°

90°

ATT

2000

10000

3000

cd/1000 lm0 lmcdcd/1000 lm


Polycarbonate diffuser- smallLO 1X40W A CL2 PC S IP65 IA/C E27 0.75 96219151 96219152LO 1X60W A CL2 PC S IP65 IA/C E27 0.75 96219153 96219154LO 1X75W A CL2 PC S IP65 IA/C E27 0.75 96219155 96219156LO 2X9W TC-SEL HF CL1 PC S IP65 FSD 2G7 0.9 96219159 96219160LO 2X9W TC-S NC CL2 PC S IP65 FSD G23 1.2 96219161 96219162LO 1X16W TC-DDEL HF CL1 PC S IP65 FSS GR10q 0.95 96219167 96219168LO 1X16W TC-DD NC CL2 PC S IP65 FSS GR8 1.2 96219169 96219170

Polycarbonate diffuser with visor - smallLO VIS 1X40W A CL2 PC S IP65 IA/C E27 0.9 96226711 96226712LO VIS 1X60W A CL2 PC S IP65 IA/C E27 0.9 96226713 96226714LO VIS 1X75W A CL2 PC S IP65 IA/C E27 0.9 96226715 96226716LO VIS 2X9W TC-SEL HF CL1 PC S IP65 FSD 2G7 1 96226719 96226720LO VIS 2X9W TC-S NC CL2 PC S IP65 FSD G23 1.3 96226721 96226722LO VIS 1X16W TC-DDEL HF CL1 PC S IP65 FSS GR10q 1.05 96226727 96226728LO VIS 1X16W TC-DD NC CL2 PC S IP65 FSS GR8 1.3 96226729 96226730

Polycarbonate diffuser with grille - smallLO GRIL 1X40W A CL2 PC S IP65 IA/C E27 0.9 96226771 96226772LO GRIL 1X60W A CL2 PC S IP65 IA/C E27 0.9 96226773 96226774LO GRIL 1X75W A CL2 PC S IP65 IA/C E27 0.9 96226775 96226776LO GRIL 2X9W TC-SEL HF CL1 PC S IP65 FSD 2G7 1 96226779 96226780LO GRIL 2X9W TC-S NC CL2 PC S IP65 FSD G23 1.3 96226781 96226782LO GRIL 1X16W TC-DDEL HF CL1 PC S IP65 FSS GR10q 1.05 96226787 96226788LO GRIL 1X16W TC-DD NC CL2 PC S IP65 FSS GR8 1.3 96226789 96226790

Glass diffuser - smallLO 1X40W A CL2 GL S IP20 IA/C E27 1.5 96219181 96219182LO 1X60W A CL2 GL S IP20 IA/C E27 1.5 96219183 96219184LO 1X75W A CL2 GL S IP20 IA/C E27 1.5 96219185 96219186LO 2X9W TC-SEL HF CL1 GL S IP20 FSD 2G7 1.6 96219189 96219190LO 2X9W TC-S NC CL2 GL S IP20 FSD G23 1.95 96219191 96219192LO 1X16W TC-DDEL HF CL1 GL S IP20 FSS GR10q 1.7 96219197 96219198LO 1X16W TC-DD NC CL2 GL S IP20 FSS GR8 1.95 96219199 96226700

Glass diffuser with visor - smallLO VIS 1X40W A CL2 GL S IP20 IA/C E27 1.9 96226741 96226742LO VIS 1X60W A CL2 GL S IP20 IA/C E27 1.9 96226743 96226744LO VIS 1X75W A CL2 GL S IP20 IA/C E27 1.9 96226745 96226746LO VIS 2X9W TC-SEL HF CL1 GL S IP20 FSD 2G7 2 96226749 96226750

Loire


LO VIS 2X9W TC-S NC CL2 GL S IP20 FSD G23 2.3 96226751 96226752LO VIS 1X16W TC-DDEL HF CL1 GL S IP20 FSS GR10q 2.05 96226757 96226758LO VIS 1X16W TC-DD NC CL2 GL S IP20 FSS GR8 2.3 96226759 96226760

Glass diffuser with grille - smallLO GRIL 1X40W A CL2 GL S IP20 IA/C E27 1.9 96226801 96226802LO GRIL 1X60W A CL2 GL S IP20 IA/C E27 1.9 96226803 96226804LO GRIL 1X75W A CL2 GL S IP20 IA/C E27 1.9 96226805 96226806LO GRIL 2X9W TC-SEL HF CL1 GL S IP20 FSD 2G7 2 96226809 96226810LO GRIL 2X9W TC-S NC CL2 GL S IP20 FSD G23 2.3 96226811 96226812LO GRIL 1X16W TC-DDEL HF CL1 GL S IP20 FSS GR10q 2.05 96226817 96226818LO GRIL 1X16W TC-DD NC CL2 GL S IP20 FSS GR8 2.3 96226819 96226820

Polycarbonate diffuser - largeLO 1X100W A CL2 PC L IP65 IA/C E27 1.4 96219157 96219158LO 2X18W TC-DEL HF CL1 PC L IP65 FSD G24q-2 2.1 96219163 96219164LO 2X18W TC-D CP CL2 PC L IP65 FSD G24d-2 2.5 96219165 96219166LO 1X28W TC-DDEL HF CL1 PC L IP65 FSS GR10q 1.6 96219171 96219172LO 1X28W TC-DD CP CL2 PC L IP65 FSS GR8 2.05 96219173 96219174LO 1X38W TC-DDEL HF CL1 PC L IP65 FSS GR10q 1.8 96219177 96219178

Polycarbonate diffuser - large - emergencyLO 1X28W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.5 96219175 96219176LO 1X38W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.5 96219179 96219180

Polycarbonate diffuser with visor - largeLO VIS 1X100W A CL2 PC L IP65 IA/C E27 1.6 96226717 96226718LO VIS 2X18W TC-DEL HF CL1 PC L IP65 FSD G24q-2 2.25 96226723 96226724LO VIS 2X18W TC-D CP CL2 PC L IP65 FSD G24d-2 2.65 96226725 96226726LO VIS 1X28W TC-DDEL HF CL1 PC L IP65 FSS GR10q 2.6 96226731 96226732LO VIS 1X28W TC-DD CP CL2 PC L IP65 FSS GR8 2.2 96226733 96226734LO VIS 1X38W TC-DDEL HF CL1 PC L IP65 FSS GR10q 1.95 96226737 96226738

Polycarbonate diffuser with visor - large - emergency versionsLO VIS 1X28W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.65 96226735 96226736LO VIS 1X38W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.65 96226739 96226740

Loire

97Fixing Centres

118

100Fixing Centres

130


Quick Fix Bracket

www.suntrade.co

m.ua


Polycarbonate diffuser with grille - largeLO GRIL 1X100W A CL2 PC L IP65 IA/C E27 1.6 96226777 96226778LO GRIL 2X18W TC-DEL HF CL1 PC L IP65 FSD G24q-2 2.25 96226783 96226784LO GRIL 2X18W TC-D CP CL2 PC L IP65 FSD G24d-2 2.65 96226785 96226786LO GRIL 1X28W TC-DDEL HF CL1 PC L IP65 FSS GR10q 2.6 96226791 96226792LO GRIL 1X28W TC-DD CP CL2 PC L IP65 FSS GR8 2.2 96226793 96226794LO GRIL 1X38W TC-DDEL HF CL1 PC L IP65 FSS GR10q 1.95 96226797 96226798

Polycarbonate diffuser with grille - large - emergency versionsLO GRIL 1X28W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.65 96226795 96226796LO GRIL 1X38W TC-DDEL HF CL1 E3 PC L IP65 FSS GR10q 2.65 96226799 96226800

Glass diffuser - largeLO 1X100W A CL2 GL L IP20 IA/C E27 2.65 96219187 96219188LO 2X18W TC-DEL HF CL1 GL L IP20 FSD G24q-2 3.35 96219193 96219194LO 2X18W TC-D CP CL2 GL L IP20 FSD G24d-2 3.5 96219195 96219196LO 1X28W TC-DDEL HF CL1 GL L IP20 FSS GR10q 2.85 96226701 96226702LO 1X28W TC-DD CP CL2 GL L IP20 FSS GR8 3.3 96226703 96226704LO 1X38W TC-DDEL HF CL1 GL L IP20 FSS GR10q 3.05 96226707 96226708

Glass diffuser - large - emergency versionsLO 1X28W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 3.75 96226705 96226706LO 1X38W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 3.75 96226709 96226710

Glass diffuser with visor - largeLO VIS 1X100W A CL2 GL L IP20 IA/C E27 2.9 96226747 96226748LO VIS 2X18W TC-DEL HF CL1 GL L IP20 FSD G24q-2 3.6 96226753 96226754LO VIS 2X18W TC-D CP CL2 GL L IP20 FSD G24d-2 4 96226755 96226756LO VIS 1X28W TC-DDEL HF CL1 GL L IP20 FSS GR10q 3.1 96226761 96226762LO VIS 1X28W TC-DD CP CL2 GL L IP20 FSS GR8 3.55 96226763 96226764LO VIS 1X38W TC-DDEL HF CL1 GL L IP20 FSS GR10q 3.3 96226767 96226768

Glass diffuser with visor - large - emergency versionsLO VIS 1X28W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 4 96226765 96226766LO VIS 1X38W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 4 96226769 96226770

Glass diffuser with grille - largeLO GRIL 1X100W A CL2 GL L IP20 IA/C E27 2.9 96226807 96226808LO GRIL 2X18W TC-DEL HF CL1 GL L IP20 FSD G24q-2 3.6 96226813 96226814LO GRIL 2X18W TC-D CP CL2 GL L IP20 FSD G24d-2 4 96226815 96226816LO GRIL 1X28W TC-DDEL HF CL1 GL L IP20 FSS GR10q 3.1 96226821 96226822LO GRIL 1X28W TC-DD CP CL2 GL L IP20 FSS GR8 3.55 96226823 96226824LO GRIL 1X38W TC-DDEL HF CL1 GL L IP20 FSS GR10q 3.3 96226827 96226828

Glass diffuser with grille - large - emergency versionsLO GRIL 1X28W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 4 96226825 96226826LO GRIL 1X38W TC-DDEL HF CL1 E3 GL L IP20 FSS GR10q 4 96226829 96226830HF - High Frequency, NC - Magnetic (not compensated), CP - Magnetic (parallel compensated), CL1 - Class I Electrical, CL2 - Class II Electrical

For Large projects the Quick Fix Bracket can be ordered as an individual item

AccessoryBULKHEAD ACCESS KIT FIX IP65 96227023

LoireLoire

23

www.suntrade.co

m.ua


Thorn Lighting Main Offices

Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form partof any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company's GeneralConditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication No: 347(INT) Publication Date: 2/05

Head OfficeThorn Lighting Holdings Limited, Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.com

AustraliaThorn Lighting Pty Limited, 13 Cooper Street,P O Box 188, Smithfield, NSW 2164, AustraliaTel: (61) 2 9604 4300Fax: (61) 2 9604 4588E-mail: [email protected]: www.thornlight.com.au

Thorn DNT Airfield Lighting Pty Limited, P O Box 548, Unit 2, 7-9 Newcastle Road, Bayswater, Melbourne, Victoria 3153, AustraliaTel: (61) 3 9720 3233Fax: (61) 3 9720 8233E-mail: [email protected]: www.thornairfield.com

AustriaThorn Licht GesmbH, Erzherzog Karl-Straße 57,Wien A-1220, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: [email protected]

ChinaThorn Lighting (Guangzhou) Limited, (Factory & Guangzhou Office), No 1 Yi Heng Road, Eastern Section, GETDD, Guangzhou 510760, ChinaTel: (86) 20 8224 1706Fax: (86) 20 8224 5777E-mail: [email protected]

Thorn Lighting (Tianjin) Company Ltd, 332 Hongqi Road,Tianjin 300190, ChinaTel: (86) 22 8369 2303Fax: (86) 22 8369 2302E-mail: [email protected]

Thorn Lighting (Guangzhou) Limited, Shanghai BranchOffice, Room 2609, Union Building,100 Yanan Road East, Shanghai 200002, ChinaTel: (86) 21 6323 0800Fax: (86) 21 6373 1626E-mail: [email protected]

Thorn Lighting (Guangzhou) Limited,Beijing Branch Office, Room 519, China World Tower I,China World Trade Centre, Beijing 100004, ChinaTel: (86) 10 6505 4601Fax: (86) 10 6505 4603E-mail: [email protected]

Czech RepublicThorn Lighting CS, spol., Jaselska 6, Praha 6,160 00 Czech RepublicTel: (42) 02 2431 5252Fax: (42) 02 3332 6313E-mail: [email protected]: www.thornlight.cz

DenmarkThorn & Jakobsson, Industrivej Vest 41,DK-6600 Vejen, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601E-mail: [email protected]: www.thorn-jakobsson.dk

EstoniaThorn Lighting Oy Eesti Filiaal, Laki 12-308, 10621 Tallinn, EstoniaTel: (372) 656 3505Fax: (372) 656 3227E-mail: [email protected]

FinlandThorn Lighting Oy, Airport Plaza Business Park,Ayritie 12A, 01510 Vantaa, FinlandTel: (358) 9 549 222Fax: (358) 9 549 22300E-mail: [email protected]: www.thornlight.fi

FranceThorn Europhane SA, 156 Boulevard Haussmann,Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240Website: www.thorn.fr

Thorn Airfield Lighting, 156 Boulevard Haussann,75379 Paris Cedex 08, FranceTel: (33) 1 49 53 62 62Fax: (33) 1 49 53 62 89E-mail: [email protected]: www.thornairfield.com

Hong KongThorn Lighting (Hong Kong) Limited, Unit 4301, Level 43, Tower 1, Metroplaza, 223 Hing Fong Road, Kwai Chung, N.T., Hong KongTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]: www.thorn.com.hk

Thorn Lighting (HK) LtdMacau Branch, Room 306, 3/F Marina Gardens,876 Avenida da Amizade, Macau, ChinaTel: (853) 702 971/702 972Fax: (853) 702 970E-mail: [email protected]: www.thorn.com.hk

Thorn Lighting CLK Ltd.Airfield Lighting Division, Unit No.4301, Level 43,Tower 1, Metroplaza, 223 Hing Fong Road, Kwai Chung, New Territories, Hong KongTel: (852) 2988 4128Fax: (852) 2988 4139E-mail: [email protected]: www.thornairfield.com

HungaryThorn Lighting Hungary Kft, West Gate Business Park,Torokbalint, To Park H-2045, HungaryTel: (36) 23 501 570Fax: (36) 23 418 120

IrelandThorn Lighting (Ireland) Limited, 320 Harold’s Cross Road, Dublin 6W, IrelandTel: (353) 1 4922 877Fax: (353) 1 4922 724E-mail: [email protected]

ItalyThorn Europhane Spa, Via G Di Vittorio, 2, Cadriano di Granarolo, Bologna 40057, ItalyTel: (39) 051 763391Fax: (39) 051 763088E-mail: [email protected]: www.thornlighting.it

LatviaThorn Lighting Oy, Representative Office, Skolas Street 21-216, Riga LV 1010, LatviaTel: (37) 7 332 660Fax: (37) 7 332 660

LithuaniaThorn Lighting Oy, Representative Office, Kalvariju Street 1, Vilnius 09310, LithuaniaTel: (370) 5 2 750 701Fax: (370) 5 2 731 480

New ZealandThorn Lighting (NZ) Ltd, 399 Rosebank Road,P O Box 71134, Rosebank, Auckland 7, New ZealandTel: (64) 9 828 7155Fax: (64) 9 828 7591

NorwayThorn Lighting AS, Industriveien 11, P O Box 63, Skytta 1483, NorwayTel: (47) 6706 2233Fax: (47) 6706 0351E-mail: [email protected]

PolandThorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wroclaw 50-513, PolandTel: (48) 71 7833 740Fax: (48) 71 3366 029E-mail: [email protected] Website: www.thornlight.pl

RussiaThorn Lighting Oy, Park Place, Leninskiy Prosp.,113/1 Office D 110, Moscow 117198, RussiaTel: (7) 095 956 59 39Fax: (7) 095 956 59 40E-mail: [email protected] Website: www.thorn.ru

Thorn Lighting Oy, Representative Office, Europa House,1 Artilleriiskaya, St Petersburg 191104, RussiaTel: (7) 812 118 8112Fax: (7) 812 118 8119E-mail: [email protected]: www.thorn.ru

SingaporeThorn Lighting (Singapore) Pte Ltd, 5 Kaki Bukit Crescent,04-02 Koyotech Building, 416238 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]: www.thornlight.com.sg

SwedenThorn Lighting AB, Industrigatan, Box 305, SE-261 23 Landskrona, SwedenTel: (46) 418 520 00Fax: (46) 418 265 74E-mail: [email protected]: www.thornlight.se

United Arab EmiratesThorn Lighting Ltd Dubai, Al Shoala Building, Office 301,Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838e-mail: [email protected]

Thorn Gulf LLC, Al Shoala Building, Office 301/2,Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838e-mail: [email protected]

United KingdomThorn Lighting Limited, Silver Screens, Elstree Way,Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.co.uk

Thorn Airfield Lighting, Silver Screens, Elstree Way,Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9804Fax: (44) 20 8732 9803E-mail: [email protected] or [email protected]: www.thornairfield.com

Export SalesThorn Lighting Limited, 156 Boulevard Haussmann,Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240

Thorn Lighting Limited, Silver Screens, Elstree Way,Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9802Fax: (44) 20 8732 9803e-mail: [email protected]


www.suntrade.co

m.ua

TitusA powerful range of fluorescent luminaires designed for sport and industrial applications

www.suntrade.co

m.ua

Introduction

The Titus range of fluorescent luminaires for industrial and sports lighting applications has quickly gained wide acceptance and there are Titus installations in all parts of the world

The basic thinking that went into the first Titus range is still valid some five years on but our technical departments now allow us to update the range with significant benefits to both user and installer.

Titus offers many new benefitsHigher output lamps The range includes the use of 80W lamps for optimum performance. With up to 24,600 initial lamp lumens per luminaire, Titus now offers a high quality alternative to conventional high and low bay fittings with high pressure discharge lamps.

Energy savingsDimmable control gear options, allow the luminaires to be easily linked to presence or daylight detectors, resulting in potential energy saving benefits.

Longer life in industry Titus Industry luminaires are supplied with heavy duty electronic ballasts designed to operate in harsh environments; for example they have a life of up to 100,000 + hours at high ambient temperatures and can withstand voltage peaks of up to 4kV.

Improved SafetyEmergency lighting is required to operate automatically when a lighting circuit loses the mains supply. Integral emergency versions of Titus are offered as standard in the range.

s Titus Industry

t Titus Sport

Contents

Performance, Efficiency, Comfort - PEC 3

Indoor sports applications 4 - 7

Industrial applications 8 - 11

Titus Sport ordering guide 12 - 13

Titus Industry ordering guide 14 - 15

2

www.suntrade.co

m.ua

Tennis hall in the French city “Thorigné Fouillard” Photograph by Pilam ©

Titus evokes the spirit of Thorn Lighting’s dynamic, results-orientated PEC programme

Performance, Efficiency and Comfort (PEC) – for a better lit environment


•Fromaluminairethatislessthan 250mm wide, MIRO reflectors offer precise light distributions (wide and asymmetric) to give good vertical illuminance

•Whencomparedtosinglepoint discharge fittings with high pressure discharge lamps, the linear nature of Titus provides less glare and distinct shadowing, offering a much improved light quality

•ColourrenderingofRa85+provides excellent visibility and satisfies the requirements of the European Directive EN 12464 for the lighting of workplaces and meets Sport Guidance recommendations

The programme is based on the principle that Performance, Efficiency and Comfort determine the effectiveness of lighting, its impact on the people using it, and its impact on the natural environment. Titus delivers the right light on the right place at the right time.

Efficiency: Conserving energy and effort, reducing CO2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain

•HighoutputT16lampswithtypically high efficacies in the 80 lumens per watt bracket combine with high frequency control gear to ensure energy efficient lighting

•Tituscanbeusedinconjunctionwith automatic control systems that react to the presence or absence of people and/or to the amount of daylight available to maximise the overall energy efficiency of any building

•Simplelightvariationcanbeachieved by Titus, through circuit switching or dimming. By reducing the power consumption on demand, energy saving is achieved.

•Thecurvedbodyprofileensuresgreat rigidity and mechanical strength whilst the steel stove enamel finish provides resistance to physically and chemically aggressive environments

•Heavydutyelectronicballastsused in certain Titus Industry versions ensures long reliable operation, saving maintenance costs in difficult to access areas

Comfort: giving people satisfaction and stimulation

•Highfrequencygeareliminatesthe risks and aggravation of stroboscopic effects, which can occur in high-speed sports or where rotating machinery is present

•Intheeventofthemainssupplyfailing, it is reassuring to know that integrated emergency versions of Titus will provide the correct level of illumination to reduce confusion and aid safe evacuation

•Betterindustriallightingcanboost workers’ morale and productivity, while in the sporting arena good lighting encourages performances and crowdenjoyment

3

www.suntrade.co

m.ua

Leisure Centre, Boson, Sweden

Indoor Sports Applications

Indoor sports facilities are being developed or upgraded throughout the world to achieve higher quality lighting

Lighting specifications are becoming more onerous, requiring increased illuminance, control flexibility and the ability to cater for multiple sport types. The Titus Sport range has been extended to address the following application needs:

Flexibility of use Most indoor sports halls cater for a mixture of different sports and non-sporting events. As all sports have different visual requirements, it is critical to define all likely activities and levels of play.

EN12193 defines all sporting requirements based on the level of competition and lighting class (I,II or III). See table above, plus individual activity requirements on page 7.

•TitusSporthasbeendevelopedfor use with ceiling heights of 4m+

•Schemescanbeplannedtocater for all three levels of competition

•Availablein49W,54Wand 80W

Visual environment It is easy to think that getting the lighting right is a matter of achieving the right lighting level, but lighting must also create the right visual performance. The uniformity of illumination, for example, affects the perception of space and the ability to play effectively. Discomfort glare determines how uncomfortable players find the lighting. Stroboscopic effect can impact the visual perception of moving objects,andmodellingisimportant as poor control of shadowingcanmakeobjectsappear unclear and flat. Discomfort glare, stroboscopic effect and modelling can all affect the performers ability to concentrate without distraction or fatigue.

•Titusprovideshighlevelsofvisual performance through a specially designed MIRO reflector

•Optionallouvresgiveadditional glare reduction

•T16lampsprovidehigh colour rendering

•Electronicballastsofferflicker free light eliminating stroboscopic effects

Level of competition Lighting ClassI II III

International or national 3

Regional 3 3

Local 3 3 3

Training 3 3

Recreational/education 3

4

www.suntrade.co

m.ua

Silkeborg Sports Centre, Denmark

5

Lighting control One lighting layout may not meet all requirements, as specific sports require different lighting configurations. (eg tennis - practice = 300 lux, tournament = 750 lux)

It is often essential for the lighting system to allow groups of luminaires to be controlled, adjustingtheleveloflightaccording to the sport. Simple luminaire lamp switching or linking directly to lighting controls enables flexibility in illuminance and a lower energy demand, allowing savings to be achieved. Some installations have daylight present, and further energy savings may be made by linking the luminaires to daylight sensors.

Forspectatoreventsthereisagrowing demand to provide theatrical lighting effects that can create atmosphere and interaction between the players and spectators. Again, this calls for lighting controls:

•Titusoffersafacilityforseparate circuit switching for different light output levels

•Dimmingcontrolgearallowsdynamic lighting effects

•Compatibilitywithlightingcontrols allows precise control and energy savings to be achieved

Arrangement of luminaires Forsportssuchasbadmintonand tennis, the positioning of the luminaires outside the playing area may be necessary to avoid disability glare for players looking upwards, whilst delivering a good level of vertical illuminance to ensure visibility of any high play.

•Tituscanbetiltedupto50°via patented brackets and still provide optimal light direction

•Allowsopportunityforproductplacement outside of the players viewing sight

Impact resistance Indoor sports luminaires should be impact resistant against balls andprojectiles.Theyshouldbe designed and mounted to minimisetherisksofobjectsbecoming trapped within or behind them.

•Titus’curvedbodyprofilepreventsprojectilesbecoming‘lodged’

•Arobustlockablewireguardsafeguards the lamps (IK09)

•DIN18032.3(ballimpactproof)approved

www.suntrade.co

m.ua

Norresundby Swimming Pool, Aalborg Denmark

Skøjtehal Ice Rink, Arhus Denmark

6

Indoor Sports Applications

Occasionally there is a requirement for a luminaire which is designed for prolonged, reliable operation in indoor sporting applications where environmental conditions are severe. Warm humid atmospheres, perhaps carrying corrosive agents, or low ambient temperatures, such as in swimming pools and ice

rinks, are representative of the more extreme conditions encountered. Titus Industry is justthatluminaire.Itismadefromgalvanised steel finished in grey with a protective glass enclosure, sealedtoIP65(dusttight,jetproof).

For certain sports, careful consideration needs to be given to environmental conditions

www.suntrade.co

m.ua

7

Type of area, task or activity Class Em Ra UoAerobics (recreational) 200 20 0.50Archery (lane/target) 200/Ev 750 60 0.5/0.8Athletics (indoor) Class I 500 60 0.70

Class II 300 60 0.60Class III 200 20 0.50

Badminton Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Basketball (indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Billiards Class I 750 80 0.80Class II 500 80 0.80Class III 500 80 0.80

Boccia (indoor) Class I 300 60 0.70Class II 200 60 0.70Class III 200 20 0.50

Boules (indoor) Class I 300 60 0.70Class II 200 60 0.70Class III 200 20 0.50

10 pin/9 pin bowling Lanes 200 60 0.50Pins 25m lane Ev 1000 0.80Pins 50m lane Ev 2000 0.80

Boxing Class I 2000 80 0.80Class II 1000 80 0.80Class III 500 60 0.50

Climbing Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.50

Cricket nets Class I 1500 60 0.80Class II 1000 60 0.80Class III 750 20 0.80

Curling (target/playing area) 300/200 0.70 0.70Cycling (indoor) Class I 750 60 0.70


Dancing Class I 500 60 0.70Class II 300 60 0.60Class III 200 20 0.50

Darts Class I Eh 200/Ev 750 60Class II Eh 100/Ev 500 60Class III Eh 50/Ev 300 20

Fencing Class I Eh 750/Ev 500 60 0.70Class II Eh 500/Ev 300 60 0.70Class III Eh 300/Ev 200 20 0.70

Football(indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Gymnastics Class I 500 60 0.70Class II 300 60 0.60Class III 200 20 0.50

Handball(indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Type of area, task or activity Class Em Ra UoHockey(indoor) Class I 750 60 0.70


Ice hockey (indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Ice skating Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Judo Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Kendo/Karate Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Netball (indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Petanque (indoor) Class I 300 60 0.70Class II 200 60 0.70Class III 200 20 0.50

Racketball Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Roller skating Class I 500 60 0.70Class II 300 60 0.60Class III 200 20 0.50

School sports Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Shooting (lane/target) 200/Ev 750 60 0.5/0.8Snooker Class I 750 80 0.80


Speed skating Class I 500 60 0.70Class II 300 60 0.60Class III 200 20 0.50

Squash Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Swimming Class I 500 60 0.70Class II 300 60 0.70Class III 200 20 0.50

Table tennis Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.70

Tennis (indoor) Class I 750 60 0.70Class II 500 60 0.70Class III 300 20 0.50

Weight lifting Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

Wrestling Class I 750 60 0.70Class II 500 60 0.70Class III 200 20 0.50

This table contains lighting recommendations for a variety of sports. Lighting requirements may differ according to the level of competition of a sport, and therefore requirements are shown for different lighting classes according to EN 12193: 2007 Light and Lighting - Sports Lighting

EN 12193: 2007 Light and Lighting - Sports Lighting

www.suntrade.co

m.ua

20X20m

Massive potential yearly power saving of 60%! (9,145,440W)

Graph B Power ConsumptionShows the energy saving potential over a yearly period when usingdimming technology linking to day light levels to achieve 500 lux.

Graph A Lighting ContributionShows the contribution of average daylight and luminaire artificial light required to achieve 500 lux.

Size: 20m X 20m, with a ceiling height of 6m’s containing 10% sky lights by floor area. Usage: Daily from 9am to 5pm (7 days a week, 365 days a year).

Based on Titus Industry 3 X 80W TW (fixed output) and Titus Industry 3 X 80W HFD TW (dimming output).

Required task illuminance level = 500 luxActual task illuminance level = 582 luxLuminaire quantity = 20

0

25

50

75

100

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

% o

f Tot

al L

ight

ing

illum

inan

ce

Artificial Luminaire Light % Output Contribution

Average Daylight % Output Contribution*

*Based on CIE average overcast sky value

Titus Industry 3 X 80W HFD TW Yearly power consumption = 6,096,960W

Titus Industry 3 X 80W TW Yearly power consumption = 15,242,400W

0

1500

3000

4500

6000

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Pow

er (W

)

Industrial Applications

There isn’t an employer in industry who wouldn’t like to see a reduction in accidents and running costs, whilst improving worker morale and productivity

Energy saving Substantial savings can be made by controlling the hours of use. The lighting may be on unnecessarily whilst the building, or part of it, is unoccupied, for example, a racking area that is not continuously used. Also giving flexibility and control to the occupants increases their efficiency and effectiveness.

Simple use of daylight detectors allows natural daylight to be maximised, allowing luminaires to be powered only when required resulting in further energy savings!

•TitusIndustryoffersdimming,allowing a simple variation in illuminance

•CompatibilitywithThornlighting controls, such as daylight/presence sensors. Formorecontroldetailspleaserefer to Thorn’s SensaLite brochure

A typical industrial area schemeThe example scheme shows typical energy saving potential benefits that can be achieved when linking luminaires to day light control systems.

Happily,there’soneluminairethatcanhelpdeliveralltheseobjectives– Titus Industry. It has been designed with detailed consideration to the following application issues:

8

www.suntrade.co

m.ua

Aiding vision Although we must never forget the importance of energy saving, a lighting system chosen on the basis of this factor alone will not necessarily provide the correct lit environment. If the installation does not aid vision, then it cannot be claimed to be energy efficient.

Illuminance on the task is the main criteria as the level of lighting can effect productivity levels, motivation and create a safer working environment for employees.

Varying visual needs require the consideration of factors such as colour rendering, glare and illuminance levels, and these should be taken into account when choosing the correct luminaire/lamp combination.

Industrial areas generally contain different height equipment (eg press machines, racking and cranes) therefore it is essential to achieve good modelling, contrast and control of shadowing in any lighting scheme. Where rotatory machinery is used, the stroboscopic effect should be eliminated to reduce the risk of any potential accidents.

•TitusIndustry’shighperformance MIRO reflectors give precise light distribution

•Availablein49W,54Wand80W

•Optionallouvreattachmentsallows greater glare control

•Electronicballastsofferflicker free light, eliminating stroboscopic effects

Concrete Factory, Betongfabrik, Ulricehamn

Maintenance Many industrial environments have impurities in the power supply due to electrical motors running, or couplers connecting/disconnecting huge loads, giving spikes and voltage fluctuations.

Over time this can impact and reduce the gear and lamp life of any luminaire. If a fitting has not been designed for prolonged operation in the areas where it will find most use, it will fail.

Frequentaccesstofittingscan be difficult and costly, so measures that ease access should be considered, along with technology that extends maintenance intervals and designs that aid easy cleaning.

•Titus Industry offers robust heavy duty electronic ballasts: Long service life up to 100,000 + hours for extended maintenance cycles - Designed to withstand voltage peaks up to 4kV for reliable operation

•Theluminaire’stiltingfacility(upto50°)andasymmetriclight distributions allow flexible mounting positions around the task area for easy maintenance access

•Glasscoverremainsfixedtothe luminaire when open

9

www.suntrade.co

m.ua

Concrete Factory, Betongfabrik, Ulricehamn

10

•Goodmodellingandreducedshadowing can be easily achieved using a linear light source over a single point source

•Excellentcolourtemperaturesand rendering characteristics (Ra 85+) for improved visibility and compliance to EN 12464

•Opportunitytoeasily add lighting controls to the scheme. Dimming versions allow flexible illuminance levels or energy savings to be made on demand.

•Integralemergencyversionssave installation time and money compared to installing separate task and emergency lighting

•Steplesstiltingandasymmetriclight distributions provide directional light. This offers flexibility in luminaire positioning in any scheme design where placement around obstacles or access for maintenance might be difficult and costly.

•Thelampandcontrolgearcombination offers great lumen maintenance depreciation (>90% at 16,000hrs) maximising luminaire maintenance interval periods

•Electronicgearsallowlampsto be instantly dimmed and switched on/off when linked to lighting controls, to provide an efficient easy energy saving solution

Industrial Applications

Harsh environments Many industrial spaces have extreme environmental conditions. Mechanical stress is also often present, therefore, luminaires should be designed and chosen to ensure they are suitable for the environmental conditions within the task space.

•TitusIndustryissealedtoIP65(dusttightandjetproof)

•Atoughenedglasspanelclamped to a single pour rubber gasket, by long toggles, ensures consistent gasket pressure and reliability

•ImpactresistancetoIK08confirms its suitability for challenging applications

•Robustfabricatedsteelbodyensures mechanical strength

Titus Range Advantages Over High Pressure Discharge Luminaires

When comparing in a scheme, traditional single point source discharge solutions such as high/low bays or floodlights, the Titus range offers many benefits including:

www.suntrade.co

m.ua

Heathrow Airport Terminal 5, UK© www.baa.com/photolibrary

11

www.suntrade.co

m.ua

12

A dedicated sports hall luminaire matching the high expectations for rigid mechanical construction and superb lighting performance

Titus Sport

Titus Sport has been developed for use in all sports, athletics and recreational halls. •Uniquecurvedhousingpreventsprojectilesfromremainingontop of the fitting

•Suppliedanddeliveredwithprotective lockable wire guard

•Separatecircuitswitching on 3 and 4 lamp versions (2+2 or 1+2)

•Patentedmountingbracketallowssteplesstiltingupto50°without rotational torque

•Easyinstallationandmaintenance with patented built-injunctionbox

•Dimmingversionsarecompatible with lighting controls

•Optionallouvresforadditionalglare control (twin lamps only)

•DIN18032.3(ballimpactproof)approved

Lamps49W-80WT16(FDH) linear fluorescent. Cap: G5

Materials/FinishBody: white powder painted galvanised steel Wire guard: galvanised steel Reflector: high quality MIRO aluminium. Halogenfreeinternalwiring.

Installation/MountingSurface mounted or mounted on catenary pipe or catenary wire. Mounting brackets included which allow tilting up to 50° even when wire suspended. The centre of gravity is positioned directly below thefasteningpoint.Forcatenarysuspension either wire fastenings or pipe clamps should be ordered. The wire guard and optional louvres are hinged for ease of maintenance.

Electrical connection Two versions of Titus Sport are available:

1. Central wiring box version with patentedbuilt-injunctionbox(minimising installation time) has side access hatch to allow electrical termination without opening the fitting.

Two 3 x 2 x 2.5mm² terminal blocks allow wiring through end-caps or top of fitting. Grommets supplied, accepting 10 to 14mm cable.

2. Through-wiring version has 5 x 2 x 2.5mm² terminal blocks at each end.

Wire guard hinges for maintenance

StandardsDesigned and manufactured to comply with EN 60598EN 605982.22Tested and approved to DIN18032-3, (36 handball shots at impact speed exceeding 16.5m/s) IP23 (IP21 when tilted up to 50˚)IK09

SpecificationTo specify state: Sports hall luminaire for 49W, 54W or 80W T16 (T5) lamps, for surface or suspended mounting with brackets included which allow tilting up to 50° without rotational torque. To comply with DIN 18032.3. As Thorn Titus Sport.

Side access ‘hatch’ for electrical connection Optional top cable entry

www.suntrade.co

m.ua

13

TW-Throughwiring,E3TX-3houremergencySelfTestAddressable,PSB-Flatsatincrossvanes,DSB-Paraboliccrossvanesallsatinfinish,HFD-HighFrequencyDimmable*Only suitable for two lamp versions

NB:**AmalgamLampUsageWe recommend the use of amalgam lamps in applications where non dimming is required in Titus Sport 4x80W versions (96205439 & 96205440) only to allow a higher luminaire efficiency to be achieved.

We do not recommend the use of amalgam lamps in applications where very fast start up, dimming or emergency lighting is essential.

Ordering Guide T16 lamps to be ordered separately.

Description Ilcos Code Socket Wt (kg) SAP Code

High FrequencyTITUSSPORT2X49W FDH G5 7.80 96008788TITUSSPORT2X54W FDH G5 6.80 96008789TITUSSPORT3X49W FDH G5 8.10 96008790TITUSSPORT3X54W FDH G5 7.10 96008791TITUSSPORT3X80W FDH G5 8.10 96205433TITUSSPORT4X49W FDH G5 8.20 96008792TITUSSPORT4X54W FDH G5 7.20 96008793TITUSSPORT4X80W FDH G5 9.10 96205439**

High Frequency Dimmable

TITUSSPORT3X49WHFD FDH G5 8.10 96205423TITUSSPORT3X80WHFD FDH G5 8.20 96205435TITUSSPORT4X49WHFD FDH G5 9.20 96205425TITUSSPORT4X54WHFD FDH G5 7.10 96205431TITUSSPORT4X80WHFD FDH G5 9.20 96205441

High Frequency Emergency SelfTest AddressableTITUSSPORT2X49WE3TX FDH G5 9.50 96206065TITUSSPORT3X49WE3TX FDH G5 10.00 96206066TITUSSPORT3X80WE3TX FDH G5 9.80 96206067TITUSSPORT4X49WE3TX FDH G5 10.00 96206068TITUSSPORT4X54WE3TX FDH G5 8.00 96206069TITUSSPORT4X80WE3TX FDH G5 10.00 96206070

High Frequency Through WireTITUSSPORT2X49WTW FDH G5 7.90 96008794TITUSSPORT2X54WTW FDH G5 6.90 96008796TITUSSPORT3X49WTW FDH G5 8.20 96008797TITUSSPORT3X54WTW FDH G5 7.20 96008799

TITUSSPORT3X80WTW FDH G5 8.20 96205434



TITUSSPORT4X80WTW FDH G5 9.20 96205440**

High Frequency Dimmable Through WireTITUSSPORT3X49WHFDTW FDH G5 8.10 96205424TITUSSPORT3X80WHFDTW FDH G5 8.40 96205436TITUSSPORT4X49WHFDTW FDH G5 9.40 96205426TITUSSPORT4X54WHFDTW FDH G5 7.20 96205432TITUSSPORT4X80WHFDTW FDH G5 9.40 96205442

Attachments*TITUSLOUVRE54WPSB 0.85 96010222TITUSLOUVRE49WPSB 0.94 96010223TITUSLOUVRE54WDSB 0.85 96010224TITUSLOUVREB49WDSB 0.94 96010225TITUSLOUVREB54WDSB30DEGREES 0.85 96010226TITUSLOUVREB49WDSB30DEGREES 0.94 96010227

AccessoriesPIPECLAMPSFASTENINGS-PAIR 0.40 96010221WIRESUSPENSIONFASTENINGS-PAIR 0.07 96010220

E3TX emergency versions offer SelfTest and Addressable Test functionality in a single fitting. E3TX luminaires operate as SelfTest when stand alone. A diagnostic processor automatically performs the mandatory function and duration tests, using a bi-colour LED indicator to show the results.

These emergency fittings become addressable when connected to Thorn’s ExplorerProjectorExplorerVisionsystem.This links every luminaire to an intelligent local controller that automatically conducts all the necessary tests and stores the full results in one central location.

200

300

100

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

Titus Sport Lamp: T16 3 X 80WLOR: 79%

FC=Fixingcentres

1534 / 49/80W

FC1598/49/80W

1620 / 49/80W

1234 / 54W

231

FC1298/54W

1320 / 54W

157 135

Titus SportLamp: T16 2 X 49WLOR: 78%

240

360

120

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

Titus Sport with PSB louvreLamp: T16 2 X 49WLOR: 62%

240

360

120

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

www.suntrade.co

m.ua

14

Lamps49-80WT16(FDH) linear fluorescent. Cap: G5

Materials/FinishBody: matt grey powder painted galvanised steel Reflector: high quality MIRO aluminium Protective glass: 4mm toughened glass with EPDM gasket. Halogenfreeinternalwiring.

Installation/MountingSurface mounted or mounted on catenary wire. Mounting brackets included which allow tilting up to 50° without rotational torque. The centre of gravity is positioned directly below the fastening point.Forcatenarysuspensionfastening accessories should be ordered. Electrical connection: through-wiring version with 5 X 2 X 2.5mm² terminal blocks at each end. Grommets supplied, accepting 10 to 14mm cable.

StandardsDesigned and manufactured to comply with EN 60598 EN 605982.22 IP65IK08

SpecificationTo specify state: Dedicated IP65 industrial luminaire for T16 (T5) linear fluorescent lamps, for surface or suspended mounting with brackets which allow tilting up to 50° degrees without rotational torque. As Thorn Titus Industry.

A range designed to meet the higher demands of industrial applications in terms of protection and mechanical construction

Titus Industry

The luminaire is built to withstand aggressive environments and has a high level of corrosion protection as standard - for example when used in car cleaning facilities where detergents can easily destroy conventional plastic luminaires.

•Fourlongtoggles(570mmin length) maintain gasket pressure to ensure a consistent gasket seal and IP65 reassurance

•Patentedmountingbracketallowssteplesstiltingupto50°without rotational torque

•Asymmetriclightdistributionsavailable

•Optionallouvresavailable for additional glare control (twin lamp only)

•Dimmableversionsavailable

•Heavydutyballastversionsforreliable long life solutions

Optional louvres

EPDM gasket gives IP65 seal

Long toggles to maintain gasket pressure

www.suntrade.co

m.ua

15

Ordering Guide T16 Lamps to be ordered separately.

Description Ilcos Code Socket Wt (kg) SAP Code

High Frequency Through WireTITUSINDUSTRY1X49WTW FDH G5 11.60 96010204TITUSINDUSTRY1X54WTW FDH G5 10.40 96010205TITUSINDUSTRY2X49WTW FDH G5 11.90 96010208TITUSINDUSTRY2X54WTW FDH G5 10.70 96010209TITUSINDUSTRY3X49WTW FDH G5 12.20 96010212TITUSINDUSTRY3X54WTW FDH G5 10.80 96010213TITUSINDUSTRY3X80WTW FDH G5 12.20 96205454**TITUSINDUSTRY4X49WTW FDH G5 12.30 96010214TITUSINDUSTRY4X54WTW FDH G5 10.90 96010215

High Frequency Dimmable Through WireTITUSINDUSTRY3X80WHFDTW FDH G5 12.40 96205456TITUSINDUSTRY4X49WHFDTW FDH G5 13.50 96205450TITUSINDUSTRY4X54WHFDTW FDH G5 10.90 96205453

High Frequency Through Wire Emergency SelfTest AddressableTITUSINDUSTRY2X49WTWE3TX FDH G5 12.50 96206061TITUSINDUSTRY3X49WTWE3TXR FDH G5 10.00 96206063TITUSINDUSTRY4X49WTWE3TXR FDH G5 10.10 96206064

High Frequency Through Wire AsymmetricTITUSINDUSTRY1X49WTWAS FDH G5 11.60 96010206TITUSINDUSTRY1X54WTWAS FDH G5 10.40 96010207TITUSINDUSTRY2X49WTWAS FDH G5 11.90 96010210TITUSINDUSTRY2X54WTWAS FDH G5 10.70 96010211

Industry High Frequency Ballast Through Wire

TITUSINDUSTRY3X80WIHFTW FDH G5 12.40 96205455**TITUSINDUSTRY4X49WIHFTW FDH G5 13.50 96205449TITUSINDUSTRY4X54WIHFTW FDH G5 10.90 96205452TITUSINDUSTRY4X80WIHFTW FDH G5 13.50 96205458**

Attachments*TITUSLOUVRE49WPSB 0.94 96010223TITUSLOUVRE54WPSB 0.85 96010222TITUSLOUVREB49WDSB 0.94 96010225TITUSLOUVRE54WDSB 0.85 96010224TITUSLOUVREB49WDSB30DEGREES 0.94 96010227TITUSLOUVREB54WDSB30DEGREES 0.85 96010226

AccessoriesWIRESUSPENSIONCLIPKITTYPE2 0.07 96010220

TW-Throughwiring,HFD-HighFrequencyDimmable,AS-Asymmetric,R-Remoteexternalbox, E3TX-3houremergencySelfTestAddressable,IHF-IndustryheavydutyHighFrequencyballast, PSB-Flatsatincrossvanes,DSB-Parabolicvanesallsatinfinish*Only suitable for two lamp versions

NB**AmalgamLampUsageWe recommend the use of amalgam lamps in applications where non dimming is required in Titus Industry 80W versions (96205454, 96205455 & 96205458) only to allow a higher luminaire efficiency to be achieved.

We do not recommend the use of amalgam lamps in applications where very fast start up, dimming or emergency (especially dangerous work areas) is essential.

200

300

100

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

Titus Industry Lamp: T16 2 X 49W TWLOR: 89%

E3TX emergency versions offer SelfTest and Addressable Test functionality in a single fitting. E3TX luminaires operate as SelfTest when stand alone. A diagnostic processor automatically performs the mandatory function and duration tests, using a bi-colour LED indicator to show the results.

These emergency fittings become addressable when connected to Thorn’s ExplorerProjectorExplorerVisionsystem.This links every luminaire to an intelligent local controller that automatically conducts all the necessary tests and stores the full results in one central location.

FC=Fixingcentres

1620 / 49/80W

FC1598/49/80W

1534 / 49/80W

1234 / 54W

FC1298/54W

1320 / 54W

248

165 135

Titus Industry with PSB louvreLamp: T16 2 X 49W TWLOR: 71%

240

360

120

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

Titus Industry with DSB 30° louvreLamp: T16 2 X 49W TWLOR: 60%

240

360

120

90° 90°

cd/1000 lm

60° 60°

30°30°

0°

www.suntrade.co

m.ua


AustraliaThorn Lighting Pty Limited 43 Newton Road, Wetherill Park NSW 2164Tel: (02) 8786 6000Fax: (02) 9612 2700E-mail: [email protected]: www.thornlighting.com.au

AustriaThorn Licht GmbH Donau-City-Straße 1, 1220 Wien, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: [email protected]: www.thornlighting.at

ChinaThorn Lighting (Guangzhou) Operations Ltd, No.12 Lian Yun Road, Eastern Section, GETDD, Guangzhou 510530, ChinaTel: (86) 20 3228 2706Fax: (86) 20 3228 1777E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd 332 Hongqi Road, Tianjin 300190, ChinaTel: (86) 22 8369 2303Fax: (86) 22 8369 2302E-mail: [email protected]

Czech RepublicThorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5Czech RepublicTel: (420) 224 315 252Fax: (420) 233 326 313E-mail: [email protected]: www.thornlighting.cz

DenmarkThorn Lighting A/SKanonbådsvej 12B, 1437 København K, DenmarkTel: (45) 7696 3600Fax: (45) 3264 0499E-mail: [email protected]: www.thornlighting.dk

FranceThorn Europhane SA 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240Website: www.thornlighting.fr

Hong KongThorn Lighting (Hong Kong) LimitedUnit 4301, Level 43, Tower 1, Metroplaza,223 Hing Fong Road, Kwai Chung, N.T., Hong KongTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]

IndiaThorn Lighting India Pvt. Ltd.501, 5th Floor, Tanishka,Opp. Gundecha Industrial EstateAkurli Road, Kandivali (E), Mumbai – 400 101Tel: (91) 22285 41056Fax: (91) 22285 1120E-mail: [email protected]: www.thornlighting.com

IrelandThorn Lighting (Ireland) Limited 320 Harold’s Cross Road, Dublin 6W, IrelandTel: (353) 1 4922 877Fax: (353) 1 4922 724E-mail: [email protected]: www.thornlighting.co.uk

ItalyThorn Europhane Spa Via G Di Vittorio, 2, Cadriano di Granarolo, Bologna 40057, ItalyTel: (39) 051 763391Fax: (39) 051 763088E-mail: [email protected]: www.thornlighting.it

New ZealandThorn Lighting (NZ) Ltd 399 Rosebank Road, Avondale, Auckland 1026 PO Box 71134, Rosebank, Auckland 1348Tel: (64) 9 828 7155Fax: (64) 9 828 7591E-mail: [email protected] Website: www.thornlighting.co.nz

NorwayThorn Lighting ASStrømsveien 344, 1081 Oslo, NorwayTel: (47) 22 82 07 00Fax: (47) 22 82 07 01E-mail: [email protected]: www.thornlighting.no

PolandThorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wrocław 50-513, PolandTel: (48) 71 7833 740Fax: (48) 71 3366 029E-mail: [email protected] Website: www.thornlighting.pl

RussiaThorn Lighting Novoslobodskaya Str., 21, office 406 Business Center “Novoslobodskaya 21”, Moscow 127030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 42E-mail: [email protected]: www.thornlighting.ru



Thorn Lighting Main OfficesSingaporeThorn Lighting (Singapore) Pte Ltd5 Kaki Bukit Crescent, 04-02 Koyotech Building, 416238 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]

SwedenThorn Lighting ABIndustrigatan, Box 305, SE-261 23 Landskrona, SwedenTel: (46) 418 520 00Fax: (46) 418 265 74E-mail: [email protected]: www.thornlighting.se

United Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, Airport road, P.O. Box 1200, Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

Thorn Gulf LLC Al Shoala Building, Office 301/2, Block E, Airport road, P.O. Box 22672, Deira, Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]

Thorn Olympics Sports Lighting TeamTel: 07785 251 438E-mail: [email protected]: www.thornlighting.co.uk

International SalesThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 1915Fax: (44) 20 8732 1911E-mail: [email protected]: www.thornlighting.com


www.suntrade.co

m.ua

A range of specialist fluorescent ‘proof’ luminaires for harsh environments

X-Force

www.suntrade.co

m.ua

Contents

3 Introduction to the range

5 Performance, Effi ciencyand Comfort (PEC)

6 X-Force application areas

8 Designed to meet thetoughest of applications

9 X-Force - its construction

10 X-Force for emergency

11 X-Force for dimming andenergy saving

12 Tested to the higheststandards

14 X-Force - easy to install

15 Chemical resistance table

16 X-Force in action

18 ImpactForce

20 CorrosionForce

22 ColdForce

24 HeatForce

26 StormForce

28 Ordering guides

30 Ordering guides andaccessories

31 Photometric data anddimensions

The X-Force range is designed to withstand difficult and demanding environments. Sharing the same high build quality and strong IP65 compliance, X-Force products continue to perform even in the most arduous wet and dusty conditions.

But not all industrial working locations are the same; each presents different challenges. Maintaining good lighting levels and a safe working environment requires the right luminaire to be selected, one that can face up to these challenges and come out on top.

Introducing X-Force

www.suntrade.co

m.ua

As the name suggests CorrosionForce is the answer when you need to light an area where the atmosphere contains trace chemicals that may contaminate a standard IP65 luminaire. Typical applications include food processing and preparation areas where specialist-cleaning agents are used.

ImpactForce takes its name from the tough polycarbonate diffuser, able to withstand high impacts of up to IK09. ImpactForce is suitable for locations where impact to the luminaire may occur or vandal resistance is required. Typical applications are loading bays, multi storey car parks, subways, sports stadiums and warehouses.

Lighting a cold store or chill room is challenging, the low temperatures would impair most luminaires. ColdForce with its high specifi cation industrial ballast and thermal over tubes ensures good light performance down to temperatures of -30°C. Typical applications include cold stores and chill rooms.

High ambient temperatures have a lasting effect on the reliability of most luminaires. HeatForce is designed to operate in temperatures up to 65°C. The tough construction and special control gear provides reliable lighting even when things start to heat up. Typical applications are boiler rooms and any areas where machinery or other equipment generate high ambient temperatures.

StormForce is a rugged luminaire with inner strength. Internal steel supports for strength, fi xing brackets for mounting onto stanchions or fl exible structures that are exposed to high winds and rain. Ideal for power stations and exposed coastal areas.

ImpactForce

CorrosionForce

ColdForce

HeatForce

StormForce

3

www.suntrade.co

m.ua

www.suntrade.co

m.ua


• The X-Force range has an optical system optimised for fluorescent lamps. The high reflectance back plate and specially designed prismatic controller give a wide light distribution with good glare control, uniformity and modelling. The optic gives high light output ratios, up to 93%.

• Fluorescent light sources ensure very good colour rendition (Ra over 80)

Efficiency: Conserving energy and effort, reducing CO2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain

• X-Force uses the latest technologies to set the pace in environmental sensitivity. With the latest lamp technology, such as T16 high output and high efficiency lamps. Digital dimmable versions are also available

• X-Force is fit for purpose. Within the range there is a choice of diffuser materials depending on the industrial application the luminaire is operating within. The clever design of the deep channel gasket ensures the long life of the IP65 seal

• With a focus on easy installation and maintenance the range comes with Quick-fix brackets as standard and easy to use stainless steel gear tray clips


• A HF electronic ballast offers the option to remove any flicker effect associated with fluorescent lighting and helps to remove any discomfort in the workplace

• Material choice and emergency versions ensure a feeling of safety

• Effective glare free light The PEC programme is based on the principle that Performance, Efficiency and Comfort determine the effectiveness of lighting, its impact on the people using it, and its impact on the natural environment. X-Force delivers the right light on the right place at the right time.

5

X-Force evokes the spirit of Thorn Lighting’s dynamic, results-orientated PEC programme


www.suntrade.co

m.ua

6

X-Force application areas

HeatForceBoiler Room

ColdForceCold Store

ImpactForceWarehouse

StormForceEmergency Exit

www.suntrade.co

m.ua

7

Kitchen

ImpactForce is a vandal resistant luminaire that can withstand accidental damage. Typical applications are loading bays, multi storey car parks, subways, sports stadiums and warehouses.• High impact polycarbonate diffuser• T16 and T26 options• Dimmable and emergency options

CorrosionForce is suitable for any location where the atmosphere contains trace chemicals or where specialist cleaning agents are used. Typical applications include kitchens, food processing areas, dairies and agricultural buildings.• PMMA diffuser• T16 and T26 options• Dimmable and emergency options

StormForce can be used on walkways, metal gantries and fl exible structures. Ideal for power stations and exposed coastal areas.• Polycarbonate or PMMA diffuser options• T16 and T26 options• Emergency options

ColdForce provides an IP65 lighting solution in low temperature locations. Typical applications are cold stores and chill rooms.• High impact polycarbonate diffuser• -30°C low temperature operation• Long life industrial ballast

HeatForce is a lighting solution for any location that generates high ambient temperatures. Typical applications are boiler rooms or industrial locations.• High impact polycarbonate diffuser• 65°C high temperature operation• Long life industrial ballast

CorrosionForceFood Preparation

www.suntrade.co

m.ua

8

X-Force - designed to meet the toughest of applications

In situations where conventional luminaires are ready to give up, the new X-Force range really comes into its own. Whether confronted with dirt, dust, moisture or chemical atmospheres, within the X-Force range there is a product that gives durable functionality and appropriate lighting quality in difficult environments.

Stainless Steel tamper proof toggles

The stainless steel toggles are supplied as standard. The toggle easily fi ts into the canopy, once fi tted it is secure.

The diffuser is clamped into position with a simple click of the toggles. To remove the diffuser a screwdriver is required deterring any unwanted interference or tampering with the luminaire.

Easy to clean

The X-Force range meets the recommendations of the International Food Standards (IFS) and British Retail Consortium (BRC).

The sleek design has a 15° slope which makes it diffi cult for dust or moisture to accumulate, so it easy to clean and keep clean.

Quick-fi x brackets

The X-Force range is supplied with Quick-fi x brackets as standard. The bracket fi ts onto the ceiling and then the canopy can be snapped into place.

Using the Quick-fi x bracket avoids the need to perforate the top of the canopy and ensures the luminaire maintains its IP65 rating.

Stainless steel gear clips

Within the canopy of X-Force sit the stainless steel gear tray retaining clips. Cleverly designed to allow the gear tray to be easily clipped and locked into position.

When essential maintenance is required the gear tray can be released and will hang from the clips.

www.suntrade.co

m.ua

9

• Glass Reinforced Plastic (GRP)The main advantages of GRP are chemical resistance and strength. It has a high strength to weight ratio and fl exural strength. It is ideal where luminaire bodies are exposed to harsh environments as it provides resistance to UV light, extreme temperatures, salt air, and a variety of chemicals.

• Polycarbonate (PC) Transparency, excellent toughness and a good dimensional stability make polycarbonate (PC) one of the most widely used thermoplastics for lighting diffusers. Constraints include fair resistance to UV radiation.

• Polymethylmethacrylate (PMMA) Better known as acrylic this material is used for diffusers because of its high light transmittance and good UV resistance. Its limitations are low impact strength and poor fl ame resistance.

X-Force - its construction

The key materials employed in the manufacture of X-Force luminaires are:

PMMA PC GRP

UV Resistance Good Fair Good

Impact Resistance 0.2Nm 10Nm 0.35Nm

Resistance to ageing Excellent Good Excellent

Silicone free Yes Yes Yes

Halogen free Yes Yes Yes

Glow wire test 650°C 850°C 850°C

Heat resistance of plastics 95° 125° 160°

UV Transmittance 91% 89% N/A

Comparison table

www.suntrade.co

m.ua

10

Thorn’s X-Force range of luminaires offers a number of emergency lighting options that are integrated into the waterproof luminaire ensuring a totally compliant lighting scheme. This approach improves the appearance of the location while reducing installation cost and complexity.

The options support integrated emergency operation for three hours, allowing full continuity of emergency lighting after an evacuation. To meet legal requirements for the inspection, test and maintenance of emergency lighting, Self Test emergency lighting options include a diagnostic microprocessor that will automatically perform functional tests and duration tests.

Quick and easy to install without additional cabling, it monitors and automatically tests emergency luminaires at specifi ed intervals, displaying the status of each unit using a two-colour LED. As a result, any problems with battery and lamp health are detected early, without requiring manual inspection.

• Compliant with EN60598 2.22.

• Faster than average rechargetime of 10-15 hours allowsearlier reinstatement ofemergency system after fullbattery discharge

• Three hours operation providescontinuity of emergency systems after testing or evacuation

• Two-colour LED provides clearstatus indication (red for faults,green for healthy)

• Boost starting gives higherlumen output during the criticalswitchover phase, ensuringgreater visibility of potentialdanger

• Automatic commissioningwithout programming savestime and money

• Thorn Explorer Project orVision versions, where the usercan monitor the emergencyluminaire status centrally, andrecord the status as requiredby the legislative norm, areavailable on request

X-Force for emergency

European safety standards specify that emergency lighting is required in all public places to enable a safe exit if the normal lighting fails. Emergency lighting has to provide suffi cient lighting to aidsafe evacuation.

Key Features in emergency lighting

www.suntrade.co

m.ua

1111

X-Force for dimming and energy saving

In combination with Sensa, Thorn’s Indoor Lighting Control range, X-Force installations will provide light at the right time, the right place and with the right light level, to increase effi ciency and comfort.

SensaLite is a range of stand-alone products that are ideal for the use with the X-Force range.

• SwitchLite detectors will link together fixed output versions of X-Force (HF) providing light only when it is needed. For indoor or outdoor applications where a high IP rating is required the SWITCHLITE MWA SLD IP64 (available in white 96233650, or black 96233649) is the right choice. In corridor or warehouse applications there are a number of options including the wall mounted SWITCHLITE SLD LONG RANGE (96012710) with a 12m detection range and the recessed wall mounted SWITCHLITE SLDM (96019208) with a 30m detection range, an ideal solution for saving energy when the location is not being used.

• The ROTARYDIM RDMR (96218669) enables users to manually control the dimmable versions of X-Force (HFD). This product is used like a standard domestic rotary dimmer, but provides the benefits of digital dimming. For example in smaller production areas (indoors) where a manual change of light levels is requested.

• Installing SensaDigital allows the HFD versions of X-Force to be daylight and presence linked. The surface mounted multisensor head SENSA MSF SEND DSI (96013491) controls a group of X-Force luminaires incorporating up to 8 DSI ballasts in total. Using the infra-red programming tool SENSA SENP (96004189) the multisensor’s parameters can be easily configured, e.g. SensaDigital will maintain the same light levels over the day. SensaDigital is typically used in zoned areas and with ceiling heights around 3m. Typical applications are daylight-lit corridors, staircases and production areas.

If you require more information on energy saving or if you wish to learn more about the Sensa Indoor Lighting Controls portfolio, please contact your Thorn representative, or visit our website:www.thornlighting.com

Sensor connected to luminaire group (max. 8 ballasts in total)

HFD HFD

HFDHFD

The X-Force range offers energy saving with the option of dimmable luminaires or Switchlight detectors

Presence-link indoors and outdoors with SWITCHLITE MWA SLD IP64

Presence-link indoors with SWITCHLITE SLD LONG RANGE IP64

Manual dimming and brightening with ROTARYDIM RDMR

Presence-link and maintained illuminance level with SENSA MSF SEND DSI

www.suntrade.co

m.ua

12

X-Force luminaires - tested to the highest standards

When a professional IP65 proof range is designed it is essential that it will perform to the highest standard expected from a Thorn luminaire. To this end the X-Force range is tested to a number of industry recognised tests and procedures that will reinforce the quality of the product. Resistance to dust and moistureThe X-Force range of luminaires are classifi ed as IP65 under the ingress protection classifi cation system known as an IP classifi cation. The IP classifi cation defi nes the degree of protection provided by an enclosure using a two digit number. The fi rst number identifi es resistance to the ingress of solids and the second digit to the ingress of liquids.

Reliability in serviceThe X-Force range of luminaires are subjected to a wide range of tests in accordance with national and international standards, such as EN 60598. Indeed our testing capabilities extend beyond the standard requirements, covering areas such as Electromagnetic Compatibility (EMC) and Electromagnetic Fields (EMF). These standards ensure that the luminaires are safe as regards their electrical, thermal and mechanical properties.

However, a deterioration in performance or appearance could occur during service. This may be the result of attack from the environment or the lamp within the luminaire itself. Additional tests are therefore applied to ensure these factors are controlled. Fortunately changes in technology result in accelerated testing being successfully incorporated in new product design. These include: life tests, UV degradation, chemical resistance, spectrum analysis, corrosion and salt spray tests.

FirstDigit

Degree of protection

Second Digit

Degree of protection

5 Protection against harmful dust - (dustproof)

5 Protection against water jets (jetproof)

6 Protection against any dust - (dust-tight)

6 Protection against heavy seas (ships deck water tight)

In harsh and diffi cult environments it is important to know that when the X-Force luminaire is selected to do a job it will perform to the highest standards.

We expect an IP65 luminaire to resist the effects of dust and moisture, but there are other additional features that are required such as resistance to...

• Impact• Chemical corrosion• High temperatures• Low temperatures• Strong winds/rain• Fire

The Thorn X-Force range includes luminaires which are designed to satisfy these protection requirements and at the same time provide high standards of performance and economy.

www.suntrade.co

m.ua

13

Mechanical testsTests subject components to torques and forces that may occur in practice. A spring-operated impact hammer is used to test the mechanical strength of components and a vibration rig to replicate exterior windage.

IP testsFor an IP65 classifi cation (dust-tight and jetproof) luminaires must resist ingress of dust with a particle size down to 1 micron and resist ingress of water from a hose or jet pressure of 30KN/m². Luminaires are switched on during testing and allowed to reach their normal operating temperature as it needs to be established whether the water or dust is drawn in when the pressure drops.

Electrical testsA safety requirement is that no live parts should be accidentally touched. This is checked by using a standard test fi nger. Also luminaires must satisfy requirements such as minimum creepage distances across the surface of insulating materials, and minimum clearance distances between live parts and earth or touchable metal parts. Luminaires must pass high-voltage fl ash tests and insulation resistance tests in humid conditions.

Thermal testsA standard draught-free room is usually used for luminaire temperature measurement. The components inside the luminaire are fi tted with many thermocouples and it is operated under specifi c conditions until the temperatures indicated by these thermocouples are stable.

Environmental testsLuminaires are subjected to long-term environmental testing and installed outdoors so the effect of weathering can be seen. UV degradation tests (discharge rig) and salt spray test chambers are employed for accelerated corrosion testing. The latter consists of a controlled temperature environment in which corrosive mist, usually based on sodium chloride, is produced. Likewise chemical and stress crazing tests are conducted with samples being immersed or suspended above various chemicals.ww

w.suntrade.co

m.ua

14

X-Force - easy to install

1. 2. 3. 4.

5. 6. 7.

Luminaire mounting positions

8.

1. Unpack the luminaire, open and remove the bag of installation accessories from the canopy.

2. Fit the toggles to canopy. Once fitted the toggles are designed so they do not come adrift from the canopy and it's almost impossible to lose them, a great advantage during installation or maintenance.

3. Fit the Quick-fix brackets onto the ceiling.

4. Snap the canopy into the Quick-fix brackets, it will easily click into place.

5. Prepare the luminaire for the electrical connection, for easy installation hinge the gear tray on the gear tray clips, insert cables through the sealing grommet and attach to the plug-in terminal block.

6. Align the gear tray with the stainless steel gear clips.

7. Snap the gear tray into place.

8. Align the diffuser into the canopy and complete the insulation by snapping the toggles into place, which will hold the diffuser.

9. Test the luminaire.

✔

✔

✗

✔

✔

✗www.suntrade.co

m.ua

15

Chemical resistance table

Chemical Type Chemicals Specifi c ImpactForce CorrosionForce ColdForce HeatForce StormForce StormForce

GRP body GRP body GRP body GRP body GRP body GRP body

PC diffuser PMMA diffuser PC diffuser PC diffuser PC diffuser PMMA diffuser

Stainless toggle Stainless toggle Stainless toggle Stainless toggle Stainless toggle Stainless toggle

Acids

acetic <30% ✔ - ✔ ✔ ✔ -

nitric <10% ✔ ✔ ✔ ✔ ✔ ✔

sulphuric <20% ✔ ✔ ✔ ✔ ✔ ✔

hydrochloric <10% ✔ ✔ ✔ ✔ ✔ ✔

chromic <20% ✔ ✔ ✔ ✔ ✔ ✔

phosphoric <40% ✔ ✔ ✔ ✔ ✔ ✔

Salts

marine salts ✔ ✔ ✔ ✔ ✔ ✔

copper sulphate ✔ ✔ ✔ ✔ ✔ ✔

sodium chloride ✔ ✔ ✔ ✔ ✔ ✔

Organics (aliphatics)

(aromatics)

ethanol <30% ✔ ✔ ✔ ✔ ✔ ✔

propanol<30% ✔ ✔ ✔ ✔ ✔ ✔

methane ✔ ✔ ✔ ✔ ✔ ✔

propane ✔ ✔ ✔ ✔ ✔ ✔

formaldehyde/formalin ✔ ✔ ✔ ✔ ✔ ✔

formic acid<5% ✔ ✔ ✔ ✔ ✔ ✔

stearic acid soap ✔ ✔ ✔ ✔ ✔ ✔

urea ✔ ✔ ✔ ✔ ✔ ✔

ethylene glycol (antifreeze) ✔ ✔ ✔ ✔ ✔ ✔

glucose sugar ✔ ✔ ✔ ✔ ✔ ✔

glycerol/glycerine ✔ ✔ ✔ ✔ ✔ ✔

Foodstuffs, cooking products, drinks, beverages

milk ✔ ✔ ✔ ✔ ✔ ✔

fruit juices ✔ ✔ ✔ ✔ ✔ ✔

vegetable oils (cold) ✔ ✔ ✔ ✔ ✔ ✔

vegetable oils (hot) - ✔ - - - ✔

meats, beef, lamb, pork, game, poultry ✔ ✔ ✔ ✔ ✔ ✔

fi sh ✔ ✔ ✔ ✔ ✔ ✔

pork fat - ✔ - - - ✔

cooking fats (cold) ✔ ✔ ✔ ✔ ✔ ✔

cooking fats (hot) - ✔ - - - ✔

alcoholic beverages beer ✔ ✔ ✔ ✔ ✔ ✔

carbonated beverages, lemonade ✔ ✔ ✔ ✔ ✔ ✔

wines & spirits ✔ ✔ ✔ ✔ ✔ ✔

water <60°C ✔ ✔ ✔ ✔ ✔ ✔

vinegar ✔ ✔ ✔ ✔ ✔ ✔

Gases

ozone ✔ ✔ ✔ ✔ ✔ ✔

sulphur dioxide industrial pollutant ✔ ✔ ✔ ✔ ✔ ✔

Building materials, paints

emulsion paints water based ✔ ✔ ✔ ✔ ✔ ✔

oil based paint - ✔ - - - ✔

white spirit/turps substitute ✔ ✔ ✔ ✔ ✔ ✔

cement ✔ ✔ ✔ ✔ ✔ ✔

Oils, fats fuels

mineral oils ✔ ✔ ✔ ✔ ✔ ✔

animal fats (cold) but not pork - ✔ - - - ✔

silicone oil ✔ ✔ ✔ ✔ ✔ ✔

diesel ✔ ✔ ✔ ✔ ✔ ✔

kerosene/paraffi n oil - ✔ - - - ✔

petroleum spirit/petroleum ether ✔ ✔ ✔ ✔ ✔ ✔

Disinfectants, cleaning agents

hydrogen peroxide <40% ✔ ✔ ✔ ✔ ✔ ✔

sodium hypochlorite <10% ✔ ✔ ✔ ✔ ✔ ✔

soaps ✔ ✔ ✔ ✔ ✔ ✔

wetting agents/biocides (dilute) ✔ ✔ ✔ ✔ ✔ ✔

This information is provided to give guidance about luminaire selection assuming prolonged exposure to potentially aggressive chemicals or atmospheres. Occasional exposure to low concentrations of potential aggressors is unlikely to be harmful to any of these luminaires. The risk of damage to the luminaires is dependent on the concentration of the aggressor, the duration and frequency of exposure and environmental conditions. If there is any doubt about the suitability of a luminaire for a particular application please enquire with details of the chemicals which will be present and the conditions of use.

When selecting an X-Force for an application you will need to consider how external chemical substances may affect the luminaire. This may be a corrosive element in the atmosphere or even cleaning agents used in the location. No materials can withstand the effects of every chemical and it would be diffi cult to display the entire list. But the table below is a selection of the most common chemicals that are used in applications the X-Force would come into contact with. The information contained in the table is valid under the following conditions:• The chemical substance listed in the table is an element and not part of a chemical compound • The ambient temperature is 22°C

www.suntrade.co

m.ua

16

Location

Abattoirs - ✔ - - *

Agricultural buildings

- ✔ - - -

Beer and wine cellars

✔ ✔ - - -

Boiler rooms - - - ✔ -

Breweries - ✔ - - -

Canopy roofs ✔ - - - *

Canteen kitchens

- ✔ - - -

Car park ✔ - - - *

Car wash - ✔ - - -

Changing rooms

✔ - - - -

Cheese dairies

- ✔ - - -

Chill stores - * ✔ - -

Cold rooms - - ✔ - -

Exposed coastal locations

- - - - ✔

Factories ✔ ✔ ✔ ✔ ✔

Food process areas

- ✔ - - -

Heavy plant rooms (high temperature)

- - - ✔ -

Industrial warehouses

✔ - - - -

Kitchens - ✔ - - -

Lavatories ✔ - - -

Loading bays ✔ - - - -

Machinery rooms (high temperature)

- - - ✔ -

Multi storey car park

✔ - - - -

Outdoor processing plants

- - - - ✔

Paper processing

- ✔ - - -

Pedestrian subways

✔ - - - -

Piers - - - - ✔

Plant rooms - - - ✔ -

Power stations

- - - - ✔

Process areas

- ✔ - - -

Railway platforms

✔ - - - *

Seafront areas

- - - - ✔

Sport stadiums

✔ - - - -

Storage sites ✔ - - - -

Subways ✔ - - - -

Textile processing plants

- ✔ - - -

Transport terminals

✔ - - - -

Underground carparks

✔ - - - -

Utility rooms - - - ✔ -

Wine Cellars - ✔ - - -

* depends on application, please contact your Thorn representative

X-Force in action

It is the choice of lighting that determines whether an area is safe - or potentially dangerous. Wherever water, dust and electrical lighting are combined, and especially in the presence of corrosive vapours or extreme temperatures, dependable lighting is essential.

And that is why Thorn’s X-Force range has a lot to live up to. Specifi c products cater for hot, cold, stormy, corrosive and impact related conditions, enabling individual design and performance requirements to be met. Chosen for safety and dependability, X-Force luminaires provide highly effective and effi cient lighting in the most hostile of environments.

Many areas can be considered as hostile, from an open walkway in a coastal power plant to a large and complex brewery. Here we have selected frequently occurring applications and explored the particular lighting issues relating to them. These illustrations show a fl agship installation of X-Force luminaires at a large food distributor in the UK, where chilled and frozen food products are stored and distributed from a modern warehouse.

The varied range of X-Force luminaires has enabled the customer to exceed the requirements of each specifi c application area whilst maintaining clear uniformity of design throughout the distribution centre.

WarehousingThe leading image shows ImpactForce luminaires mounted in a racking area. The main issues here centre on the dangers from moving vehicles, such as forklift trucks, that can collide with fi ttings and cause potentially disruptive vibration. The high impact polycarbonate diffuser of ImpactForce will resist a direct impact of up to IK09 and still continue to operate. ImpactForce offers a wide range of variants, including emergency, digital dimming and T16 (T8) lamp options.

Cleaning areas Lighting in the food industry needs to ensure strong task illumination and help maintain uncompromising standards of hygiene. The food and drink industry covers a vast range of working areas, some of which are dusty, damp, corrosive and laden with oil and fat vapours. In the case of this food distributor, specialised cleaning agents have to be used, which could damage or inhibit the performance of the luminaires.

CorrosionForce overcomes these Issues and meets tough regulations set by the British Retail Consortium (BRC) and the International Food Standards (IFS). These guidelines state that luminaires positioned near the product must be housed in a secure enclosure, where no component parts can fall into the product. The luminaires need to be easily cleaned, maintained and re-lamped. Crucially, the light fi ttings must be constructed

using materials with a fi nish that will withstand frequent cleaning with inorganic chemical agents and possible hosing down.

X-Force exceeds all these requirements. It is IP65 rated and supplied with stainless steel toggles, quick-fi x brackets and a chemical resistant PMMA diffuser (see page 15). A range of dimmable versions is also available.

Cold storeThe fi nal image shows ColdForce luminaires installed in the frozen food section of the distribution centre. Special attention must be given to cold stores to ensure the lamp and luminaires chosen are capable of optimum performance at very low temperatures. The most common problems in this kind of application are starting and icing up. Although fl uorescent lamps are sensitive to temperature, the ColdForce luminaire range is specifi cally designed for cold stores. Fully tested lamp sleeves and special control gear enable luminaires to operate at temperatures down to -30°C, whilst maintaining good light output and strong reliability.

www.suntrade.co

m.ua

17

In the frozen food sector the food has to be stored at temperatures well below freezing. The logical answer here is ColdForce, which will perform at temperatures as low as -30°C.

Luminaires used in the cleaning bays have to serve a dual function of hygiene and resistance to cleaning agents. CorrosionForce overcomes the problem by maintaining optimum performance in atmospheres where inorganic chemicals are present.

ImpactForce has been fi tted in the storage and racking areas because of its robust construction and resistance to impacts and vibrations.www.suntrade.co

m.ua

18

ImpactForce is a rugged tough luminaire suitable for a wide range of applications that are indoors or in semi outdoor areas. In industrial locations there are dangers from moving vehicles or machinery, which can cause accidental impact damage to the luminaire. The diffuser has been designed to withstand impacts of up to IK09 and continue to operate. Other suitable locations are car parks and pedestrian subways, where the tough construction and vandal resistant toggles deter any unwanted interference.

ImpactForce has a wide range of variants including T16 and T26 lamp options plus emergency and dimmable options.

ImpactForce

A high performance impact resistant, IP65 proof fluorescent range

ImpactForce Diffuser PC Canopy GRP

UV Resistance Fair Good

Impact Resistance 10Nm 0.35Nm

Resistance to ageing Good Excellent

Silicone free Yes Yes

Halogen free:LuminaireInternal Wiring

YesYes

Yesn/a

Food grade certifi cation (15° angle)

Yes Yes

Glow wire test 850°C 850°C

Heat resistance of luminaire plastics

125°C 160°C

UV Transmittance 89% n/a

Lamps 18-70W T26 (FD) linear fl uorescent. Cap: G13 28-80W T16 (FDH) linear fl uorescent, Cap: G5

Materials/Finish Canopy: glass-fi bre reinforced polyester. Diffuser: polycarbonate with linear prisms. Gasket: expanded polyurethane Toggles: stainless steel Gear tray: steel, white enamelled fi nish

Installation/Mounting Cable entry positions at the back and each end of the fi tting. Supplied with IP65 grommet Stainless steel quick fi x brackets supplied with each luminaire, Stainless steel toggles are captive in the canopy to prevent loss during maintenance, and steel gear tray is retained by fi nger operated spring latches. Accessory kits for BESA box mounting, conduit mounting, chain suspension and catenary suspension are all available. Through wire kits can be specifi ed for use with non-emergency versions (see accessories listing).

Standards Designed and manufactured to comply with EN 60598 Emergency EN60598 2.22. Class I ElectricalIK09 (diffuser)IK03 (canopy)850°C fi re retardant (glow wire test) IP65

Specifi cationTo specify state: High performance, IP65, dust and moisture proof impact resistant luminaire with GRP canopy, polycarbonate diffuser and stainless steel toggles, 18-70W T26 linear fl uorescent lamps or 28-80W T16 linear fl uorescent lamps, digital dimming and emergency options, with HF gear or magnetic gear. As Thorn ImpactForce.

Applications

• Industrial warehouses

• Subways

• Storage sites

• Lavatories

• Changing rooms

• Garages

• Underground carparks

• Railway platforms

• Loading bays

• Factories

• Sport stadiums

• Work areas

• Multi storey carparks

• Stadia

Key Features

• GRP canopy

• High impact polycarbonate diffuser

• Choice of T26 or T16 lamps

• Switchstart or High Frequency control gear

• Integral 3 hour maintained emergency versions

• Digital Dim options

• Horizontal or vertical applications

• Vandal resistant

• Stainless steel toggles

• Through wire options

• Quick-fix brackets supplied

• LSOH cable as standard

www.suntrade.co

m.ua

www.suntrade.co

m.ua

20

CorrosionForce is constructed from materials that make it suitable for locations that are exposed to liquids or atmospheres that contain potentially corrosive chemicals. Typical areas include food processing areas or milk dairies but also in areas where specialised cleaning agents are used.

When selecting CorrosionForce for an application care needs to be taken that it is suitable. Please check page 15 of this brochure for guidance or contact your local Thorn offi ce of there is any doubt about the suitability of a luminaire.

CorrosionForce

A high performance, corrosion resistant IP65 proof range. Made from materials selected to withstand aggressive atmospheres laden with salts, acids and mineral oils.

CorrosionForce Diffuser PMMA Canopy GRP

UV Resistance Good Good

Impact Resistance 0.2Nm 0.35Nm

Resistance to ageing Excellent Excellent



YesYes

Yesn/a


Yes Yes



95°C 160°C


Lamps 18-70W T26 (FD) linear fl uorescent. Cap: G13 28-80W T16 (FDH) linear fl uorescent, Cap: G5

Materials/Finish Canopy: glass-fi bre reinforced polyester. Diffuser: PMMA with linear prisms. Gasket: expanded polyurethane. Toggles: stainless steel. Gear tray: steel, white enamelled fi nish

Installation/Mounting Cable entry positions at the back and each end of the fi tting. Supplied with IP65 grommet, Stainless steel quick fi x brackets supplied with each luminaire, Stainless steel toggles are captive in the canopy to prevent loss during maintenance, and steel gear tray is retained by fi nger operated spring latches. Accessory kits for BESA box mounting, conduit mounting, chain suspension and catenary suspension are all available. Through wire kits can be specifi ed for use with non-emergency versions (see accessories listing).

Standards Designed and manufactured to comply with EN 60598 Emergency EN60598 2.22. Class I ElectricalIK02 (diffuser)IK03 (canopy)650°C fi re retardant(glow wire test) IP65

Specifi cationTo specify state: High performance, IP65, dust and moisture proof corrosion resistant luminaire with GRP canopy, PMMA diffuser and stainless steel toggles, 18-70W T26 linear fl uorescent lamps or 28-80W T16 linear fl uorescent lamps, digital dimming and emergency options, with HF gear or magnetic gear. As Thorn CorrosionForce.

Applications

• Abattoirs

• Agricultural buildings

• Factories

• Garages

• Kitchens

• Plant rooms

• Process areas

• Transport terminals

• Wine Cellars

• Paper processing

• Textile processing plants

• Cheese dairies

Key Features

• GRP canopy

• Corrosion resistant PMMA diffuser

• Choice of T26 or T16 lamps

• Switchstart or High Frequency control gear

• Integral 3 hour maintained emergency versions

• Digital Dim options

• Good chemical resistance



• Through wire options



www.suntrade.co

m.ua

www.suntrade.co

m.ua

22

ColdForce

Applications

• Chill rooms

• Process areas

• Wine Cellars

• Cheese dairies

• Cold stores

ColdForce has been developed for use in low temperature applications. There are problems associated with standard fl uorescent lamps when lighting low temperature locations such as chill rooms and cold stores; the low temperatures have an effect the starting circuit and light output. ColdForce overcomes these problems by incorporating an industrial ballast. This allows ColdForce luminaries to operate at temperatures as low as -30°C, perfect for cold food storage areas. To minimise maintenance costs ColdForce allows the user to install standard lamps which are fi tted into the supplied over tubes.

A high protection IP65 proof fl uorescent range for use in low temperature environments

ColdForce Diffuser PC Canopy GRP






YesYes

Yesn/a


Yes Yes



125°C 160°C


Lamps 36-58W T26 (FD) linear fl uorescent. Cap: G13

Materials/Finish Canopy: glass-fi bre reinforced polyester. Diffuser: polycarbonate with linear prisms. Gasket: expanded polyurethane. Toggles: stainless steel. Gear tray: steel, white enamelled fi nish

Installation/Mounting Cable entry positions at the back and each end of the fi tting. Supplied with IP65 grommet Stainless steel quick fi x brackets supplied with each luminaire, Stainless steel toggles are captive in the canopy to prevent loss during maintenance, and steel gear tray is retained by fi nger operated spring latches. BESA box and conduit mounting, chain suspension and catenary suspension kits, plus through wire kits are all available (see accessories listing)

Standards Designed and manufactured to comply with EN 60598 Class I ElectricalIK09 (diffuser)IK03 (canopy)850°C fi re retardant(glow wire test) IP65

Specifi cationTo specify state: High performance, IP65, dust and moisture proof impact resistant luminaire with GRP canopy, polycarbonate diffuser and stainless steel toggles, 36-58W T26 linear fl uorescent lamps, industrial ballast for reliable operation down to -30°C, thermal over tubes fi tted to standard tubes for low maintenance. As Thorn ColdForce.

Key Features

• GRP canopy


• Low temperature Industrial Ballast

• Low temperature over tubes



• Does not require special fluorescent lamps

• Low maintenance costs



www.suntrade.co

m.ua

www.suntrade.co

m.ua

24

HeatForce

HeatForce is suitable for tough industrial applications where ambient temperatures can rise up to 65°C. Extreme temperatures have a lasting effect on the reliability of standard proof luminaires. HeatForce has been designed to operate safely in such demanding conditions, fi tted with a high performance industrial ballast that will give over 50,000 hours operation.

High performance IP65 proof luminaire that will continue to perform in high ambient temperature locations

Applications

• Boiler rooms

• Utility rooms

• Machinery rooms

• Heavy plant rooms

HeatForce Diffuser PC Canopy GRP






YesYes

Yesn/a

Food gradecertifi cation(15° angle)

Yes Yes



125°C 160°C


Lamps 36-58W T26 (FD) linear fl uorescent. Cap: G13

Materials/Finish Canopy: glass-fi bre reinforced polyester. Diffuser: polycarbonate with linear prisms. Gasket: expanded polyurethane. Toggles: stainless steel. Gear tray: steel, white enamelled fi nish

Installation/Mounting Cable entry positions at the back and each end of the fi tting. Supplied with IP65 grommet Stainless steel quick fi x brackets supplied with each luminaire, Stainless steel toggles are captive in the canopy to prevent loss during maintenance, and steel gear tray is retained by fi nger operated spring latches. BESA box and conduit mounting, chain suspension and catenary suspension kits, plus through wire kits are all available (see accessories listing)

Standards Designed and manufactured to comply with EN 60598 Class I ElectricalIK09 (diffuser)IK03 (canopy)850°C fi re retardant(glow wire test) IP65

Specifi cationTo specify state:High performance, IP65, dust and moisture proof impact resistant luminaire with GRP canopy, polycarbonate diffuser and stainless steel toggles, 36-58W T26 linear fl uorescent lamps, industrial ballast for reliable operation up to 65°C, 50,000 hours at maximum temperature. As Thorn HeatForce.

Key Features

• GRP canopy


• High temperature industrial ballast

• Operation up to 65°


• IP65-Dust and moisture proof



• 65°C maximum temperature for 36W. 55°C maximum temperature for 58W.


www.suntrade.co

m.ua

www.suntrade.co

m.ua

26

StormForce

StormForce has been developed for applications that require IP65 proof luminaires to perform in environments exposed to rain and strong winds. Luminaires mounted on poles, metal gantries or fl exible structures that may distort under high winds causing the housing to twist and deform the IP65 seal. StormForce is specifi cally designed for tough outdoor applications such as power stations, process plants and coastal locations.

A specialist range of IP65 proof luminaires suitable for exterior environments that are subject to rain and strong winds

Applications

• Outdoor processing plants

• Seafront areas

• Piers

• Transport areas

• Outdoor processing plants

• Power stations

• Exposed coastal locations

StormForce Diffuser PMMA

Diffuser PC Canopy GRP

UV Resistance Good Fair Good

Impact Resistance 0.2Nm 10Nm 0.35Nm

Resistance to ageing

Excellent Good Excellent

Silicone free Yes Yes Yes


YesYes

YesYes

Yesn/a


Yes Yes Yes

Glow wire test 650°C 850°C 850°C


95°C 125°C 160°C

UV Transmittance 91% 89% n/a

Lamps 36-70W T26 (FD) linear fl uorescent. Cap: G13 35-49W T16 (FDH) linear fl uorescent, Cap: G5 Materials/Finish Canopy: Glass-fi brereinforced polyester. Diffuser: Choice of PMMA or polycarbonate with linear prisms. Gasket: expanded polyurethane Toggles: stainless steel Gear tray: steel, white enamelled fi nish

Installation/Mounting Cable entry positions at the back and each end of the fi tting. Supplied with IP65 grommet, stainless steel toggles are captive in the canopy to prevent loss during maintenance, and steel gear tray is retained by fi nger operated spring latches. Accessory kits for BESA box mounting, conduit mounting, chain suspension and catenary suspension are all available. Through wire kits can be specifi ed for use with non-emergency versions (see accessories listing).

Standards Designed and manufactured to comply with EN 60598 Emergency EN60598 2.22. Class I ElectricalIK09 (PC diffuser)IK02 (PMMA diffuser)IK03 (canopy)850°C fi re retardant(glow wire test) IP65

Specifi cationTo specify state:High performance, IP65, dust and moisture proof impact resistant luminaire with a reinforced GRP canopy suitable for exposed exterior locations, polycarbonate diffuser or acrylic diffuser, stainless steel toggles, internal steel channel, gull wing brackets, 36-70W T26 linear fl uorescent lamps or 35-49W T16 linear fl uorescent lamps, HF gear. As Thorn StormForce.

Key Features

• Reinforced GRP Canopy

• Choice of PMMA or PC diffuser

• Internal steel channel

• High Frequency control gear

• IP65-Dust and moisture proof


• Robust enclosure and long life seal

• Factory fi tted gull wing brackets

• Emergency versions available

• Dimmable versions available on request


www.suntrade.co

m.ua

www.suntrade.co

m.ua

28

Description Ilcos Code Socket Weight (Kg) SAP Code

T16 High Frequency versionsIMPACTF2 1X28W T16 HF L000 FDH G5 1.9 96234392IMPACTF2 1X35W T16 HF L000 FDH G5 2.3 96234404IMPACTF2 1X49W T16 HF L000 FDH G5 2.3 96234416IMPACTF2 1X54W T16 HF L000 FDH G5 1.9 96234428IMPACTF2 1X80W T16 HF L000 FDH G5 2.3 96234432IMPACTF2 2X28W T16 HF L000 FDH G5 2.6 96234436IMPACTF2 2X35W T16 HF L000 FDH G5 3.2 96234448IMPACTF2 2X49W T16 HF L000 FDH G5 3.2 96234460

T16 High Frequency Through Wire versionsIMPACTF2 1x28W T16 HF TW L000 FDH G5 2.0 96234878IMPACTF2 1x35W T16 HF TW L000 FDH G5 2.4 96234879IMPACTF2 1x49W T16 HF TW L000 FDH G5 2.4 96234880IMPACTF2 1x80W T16 HF TW L000 FDH G5 2.4 96234881IMPACTF2 2x28W T16 HF TW L000 FDH G5 2.7 96234882IMPACTF2 2x35W T16 HF TW L000 FDH G5 3.3 96234883IMPACTF2 2x49W T16 HF TW L000 FDH G5 3.3 96234884

T16 High Frequency Digital Dimmable versionsIMPACTF2 1X28W T16 HFD L000 FDH G5 2.3 96234394IMPACTF2 1X35W T16 HFD L000 FDH G5 2.7 96234406IMPACTF2 1X49W T16 HFD L000 FDH G5 2.7 96234418IMPACTF2 1X54W T16 HFD L000 FDH G5 2.1 96234430IMPACTF2 1X80W T16 HFD L000 FDH G5 2.8 96234434IMPACTF2 2X28W T16 HFD L000 FDH G5 3.0 96234438IMPACTF2 2X35W T16 HFD L000 FDH G5 3.6 96234450IMPACTF2 2X49W T16 HFD L000 FDH G5 4.6 96234462

T16 High Frequency Digital Dimmable Though Wire versionsIMPACTF2 1x28W T16 HFD TW L000 FDH G5 2.4 96234885IMPACTF2 1x35W T16 HFD TW L000 FDH G5 2.8 96234886IMPACTF2 1x49W T16 HFD TW L000 FDH G5 2.8 96234887IMPACTF2 1x80W T16 HFD TW L000 FDH G5 2.9 96234888IMPACTF2 2x28W T16 HFD TW L000 FDH G5 3.1 96234889IMPACTF2 2x35W T16 HFD TW L000 FDH G5 3.7 96234890IMPACTF2 2x49W T16 HFD TW L000 FDH G5 4.7 96234891

T16 High Frequency Emergency versionsIMPACTF2 1X28W T16 HF E3 L000 FDH G5 2.3 96234396IMPACTF2 1X35W T16 HF E3 L000 FDH G5 2.7 96234408IMPACTF2 1X49W T16 HF E3 L000 FDH G5 2.7 96234420IMPACTF2 2X28W T16 HF E3 L000 FDH G5 2.6 96234440IMPACTF2 2X35W T16 HF E3 L000 FDH G5 3.6 96234452IMPACTF2 2X49W T16 HF E3 L000 FDH G5 4.6 96234464

T16 High Frequency Emergency SelfTest versionsIMPACTF2 1X28W T16 HF E3T L000 FDH G5 2.3 96234400IMPACTF2 1X35W T16 HF E3T L000 FDH G5 2.7 96234412IMPACTF2 1X49W T16 HF E3T L000 FDH G5 2.7 96234424IMPACTF2 2X28W T16 HF E3T L000 FDH G5 2.6 96234444IMPACTF2 2X35W T16 HF E3T L000 FDH G5 3.6 96234456IMPACTF2 2X49W T16 HF E3T L000 FDH G5 4.6 96234468

T16 High Frequency Digital Dimmable Emergency versionsIMPACTF2 1X28W T16 HFD E3 L000 FDH G5 2.7 96234398IMPACTF2 1X35W T16 HFD E3 L000 FDH G5 3.1 96234410IMPACTF2 1X49W T16 HFD E3 L000 FDH G5 3.1 96234422IMPACTF2 2X28W T16 HFD E3 L000 FDH G5 3.4 96234442IMPACTF2 2X35W T16 HFD E3 L000 FDH G5 4.0 96234454IMPACTF2 2X49W T16 HFD E3 L000 FDH G5 4.0 96234466

T16 High Frequency Digital Dimmable Emergency SelfTest versionsIMPACTF2 1X28W T16 HFD E3T L000 FDH G5 2.7 96234402IMPACTF2 1X35W T16 HFD E3T L000 FDH G5 3.1 96234414IMPACTF2 1X49W T16 HFD E3T L000 FDH G5 3.1 96234426IMPACTF2 2X28W T16 HFD E3T L000 FDH G5 3.4 96234446IMPACTF2 2X35W T16 HFD E3T L000 FDH G5 4.0 96234458IMPACTF2 2X49W T16 HFD E3T L000 FDH G5 4.0 96234470

T16 High Frequency Emergency SelfTest Addressable versionsIMPACTF2 1X28W T16 HF E3X L000 FDH G5 2.3 96234947IMPACTF2 1X35W T16 HF E3X L000 FDH G5 2.7 96234948IMPACTF2 1X49W T16 HF E3X L000 FDH G5 2.7 96234949IMPACTF2 2X28W T16 HF E3X L000 FDH G5 2.6 96234950IMPACTF2 2X35W T16 HF E3X L000 FDH G5 3.6 96234951IMPACTF2 2X49W T16 HF E3X L000 FDH G5 4.6 96234952


T26 Switchstart versionsIMPACTF2 1X18W T26 CP L000 FD G13 1.2 96234870IMPACTF2 1X36W T26 CP L000 FD G13 2.2 96234304IMPACTF2 1X58W T26 CP L000 FD G13 2.9 96234334IMPACTF2 1X70W T26 CP L000 FD G13 3.7 96234348IMPACTF2 2X18W T26 CP L000 FD G13 2.4 96234871IMPACTF2 2X36W T26 CP L000 FD G13 3.4 96234356IMPACTF2 2X58W T26 CP L000 FD G13 4.6 96234370IMPACTF2 2X70W T26 CP L000 FD G13 5.9 96234384

T26 Switchstart Through Wire versionsIMPACTF2 1x36W T26 CP TW L000 FD G13 2.3 96234872IMPACTF2 1x58W T26 CP TW L000 FD G13 3.0 96234873IMPACTF2 1x70W T26 CP TW L000 FD G13 3.8 96234874IMPACTF2 2x36W T26 CP TW L000 FD G13 3.5 96234875IMPACTF2 2x58W T26 CP TW L000 FD G13 4.7 96234876IMPACTF2 2x70W T26 CP TW L000 FD G13 6.0 96234877

T26 High Frequency versionsIMPACTF2 1X18W T26 HF L000 FD G13 0.9 96234892IMPACTF2 1X36W T26 HF L000 FD G13 1.9 96234306IMPACTF2 1X58W T26 HF L000 FD G13 2.5 96234336IMPACTF2 1X70W T26 HF L000 FD G13 3.3 96234350IMPACTF2 2X18W T26 HF L000 FD G13 1.6 96234893IMPACTF2 2X36W T26 HF L000 FD G13 2.6 96234358IMPACTF2 2X58W T26 HF L000 FD G13 3.2 96234372IMPACTF2 2X70W T26 HF L000 FD G13 4.6 96234386

T26 High Frequency Digital Dimmable versionsIMPACTF2 1X18W T26 HFD L000 FD G13 1.5 96234894IMPACTF2 1X36W T26 HFD L000 FD G13 2.3 96234308IMPACTF2 1X58W T26 HFD L000 FD G13 2.8 96234338IMPACTF2 2X18W T26 HFD L000 FD G13 2.1 96234895IMPACTF2 2X36W T26 HFD L000 FD G13 2.8 96234360IMPACTF2 2X58W T26 HFD L000 FD G13 3.5 96234374

T26 High Frequency Though wire versionsIMPACTF2 1X36W T26 HF TW L000 FD G13 2.0 96234896IMPACTF2 1X58W T26 HF TW L000 FD G13 2.6 96234897IMPACTF2 1X70W T26 HF TW L000 FD G13 3.4 96234898IMPACTF2 2X36W T26 HF TW L000 FD G13 2.7 96234899IMPACTF2 2X58W T26 HF TW L000 FD G13 3.3 96234900IMPACTF2 2X70W T26 HF TW L000 FD G13 4.7 96234901

T26 High Frequency Digital Dimmable Through Wire versionsIMPACTF2 1x36W T26 HFD TW L000 FD G13 2.4 96234902IMPACTF2 1x58W T26 HFD TW L000 FD G13 2.9 96234903IMPACTF2 2x36W T26 HFD TW L000 FD G13 2.9 96234904IMPACTF2 2x58W T26 HFD TW L000 FD G13 3.6 96234905

T26 High Frequency Emergency versionsIMPACTF2 1X36W T26 HF E3 L000 FD G13 2.3 96234326IMPACTF2 1X58W T26 HF E3 L000 FD G13 2.8 96234340IMPACTF2 1X70W T26 HF E3 L000 FD G13 3.6 96234352IMPACTF2 2X36W T26 HF E3 L000 FD G13 2.8 96234362IMPACTF2 2X58W T26 HF E3 L000 FD G13 3.8 96234376IMPACTF2 2X70W T26 HF E3 L000 FD G13 5.2 96234388

T26 High Frequency Emergency Digital Dimmable versionsIMPACTF2 1X36W T26 HFD E3 L000 FD G13 2.7 96234328IMPACTF2 1X58W T26 HFD E3 L000 FD G13 3.3 96234342IMPACTF2 2X36W T26 HFD E3 L000 FD G13 3.4 96234364IMPACTF2 2X58W T26 HFD E3 L000 FD G13 4.0 96234378

T26 High Frequency Emergency SelfTest versionsIMPACTF2 1X36W T26 HF E3T L000 FD G13 2.3 96234330IMPACTF2 1X58W T26 HF E3T L000 FD G13 2.8 96234344IMPACTF2 1X70W T26 HF E3T L000 FD G13 3.6 96234354IMPACTF2 2X36W T26 HF E3T L000 FD G13 2.8 96234366IMPACTF2 2X58W T26 HF E3T L000 FD G13 3.8 96234380IMPACTF2 2X70W T26 HF E3T L000 FD G13 5.2 96234390

T26 High Frequency Digital Dimmable Emergency SelfTest versionsIMPACTF2 1X36W T26 HFD E3T L000 FD G13 2.7 96234332IMPACTF2 1X58W T26 HFD E3T L000 FD G13 3.3 96234346IMPACTF2 2X36W T26 HFD E3T L000 FD G13 3.4 96234368IMPACTF2 2X58W T26 HFD E3T L000 FD G13 4.0 96234382

T26 High Frequency Emergency SelfTest Addressable versionsIMPACTF2 1X36W T26 HF E3X L000 FD G13 2.3 96234959IMPACTF2 1X58W T26 HF E3X L000 FD G13 2.8 96234960IMPACTF2 1X70W T26 HF E3X L000 FD G13 3.6 96234961IMPACTF2 2X36W T26 HF E3X L000 FD G13 2.8 96234962IMPACTF2 2X58W T26 HF E3X L000 FD G13 3.8 96234963IMPACTF2 2X70W T26 HF E3X L000 FD G13 5.2 96234964

ImpactForce Lamps must be ordered separately

Ordering Guides

www.suntrade.co

m.ua

29


T16 High Frequency versionsCORRF2 1X28W T16 HF L000 FDH G5 1.9 96234544CORRF2 1X35W T16 HF L000 FDH G5 2.3 96234556CORRF2 1X49W T16 HF L000 FDH G5 2.3 96234568CORRF2 1X54W T16 HF L000 FDH G5 1.9 96234580CORRF2 1X80W T16 HF L000 FDH G5 2.3 96234584CORRF2 2X28W T16 HF L000 FDH G5 2.6 96234588CORRF2 2X35W T16 HF L000 FDH G5 3.2 96234600CORRF2 2X49W T16 HF L000 FDH G5 3.2 96234612

T16 High Frequency Through Wire versionsCORRF2 1X28W T16 HF TW L000 FDH G5 2.0 96234914CORRF2 1X35W T16 HF TW L000 FDH G5 2.4 96234915CORRF2 1X49W T16 HF TW L000 FDH G5 2.4 96234916CORRF2 1X80W T16 HF TW L000 FDH G5 2.4 96234917CORRF2 2X28W T16 HF TW L000 FDH G5 2.7 96234918CORRF2 2X35W T16 HF TW L000 FDH G5 3.3 96234919CORRF2 2X49W T16 HF TW L000 FDH G5 3.3 96234920

T16 High Frequency Digital Dimmable versionsCORRF2 1X28W T16 HFD L000 FDH G5 2.3 96234546CORRF2 1X35W T16 HFD L000 FDH G5 2.7 96234558CORRF2 1X49W T16 HFD L000 FDH G5 2.7 96234570CORRF2 1X54W T16 HFD L000 FDH G5 2.1 96234582CORRF2 1X80W T16 HFD L000 FDH G5 2.8 96234586CORRF2 2X28W T16 HFD L000 FDH G5 3.0 96234590CORRF2 2X35W T16 HFD L000 FDH G5 3.6 96234602CORRF2 2X49W T16 HFD L000 FDH G5 4.6 96234614

T16 High Frequency Digital Dimmable Though Wire versionsCORRF2 1X28W T16 HFD TW L000 FDH G5 2.4 96234921CORRF2 1X35W T16 HFD TW L000 FDH G5 2.8 96234922CORRF2 1X49W T16 HFD TW L000 FDH G5 2.8 96234923CORRF2 1X80W T16 HFD TW L000 FDH G5 2.9 96234924CORRF2 2X28W T16 HFD TW L000 FDH G5 3.1 96234925CORRF2 2X35W T16 HFD TW L000 FDH G5 3.7 96234926CORRF2 2X49W T16 HFD TW L000 FDH G5 4.7 96234927

T16 High Frequency Emergency versionsCORRF2 1X28W T16 HF E3 L000 FDH G5 2.3 96234548CORRF2 1X35W T16 HF E3 L000 FDH G5 2.7 96234560CORRF2 1X49W T16 HF E3 L000 FDH G5 2.7 96234572CORRF2 2X28W T16 HF E3 L000 FDH G5 2.6 96234592CORRF2 2X35W T16 HF E3 L000 FDH G5 3.6 96234604CORRF2 2X49W T16 HF E3 L000 FDH G5 4.6 96234616

T16 High Frequency Digital Dimmable Emergency versionsCORRF2 1X28W T16 HFD E3 L000 FDH G5 2.3 96234550CORRF2 1X35W T16 HFD E3 L000 FDH G5 2.7 96234562CORRF2 1X49W T16 HFD E3 L000 FDH G5 2.7 96234574CORRF2 2X28W T16 HFD E3 L000 FDH G5 2.6 96234594CORRF2 2X35W T16 HFD E3 L000 FDH G5 3.6 96234606CORRF2 2X49W T16 HFD E3 L000 FDH G5 4.6 96234618

T16 High Frequency Emergency SelfTest versionsCORRF2 1X28W T16 HF E3T L000 FDH G5 2.7 96234552CORRF2 1X35W T16 HF E3T L000 FDH G5 3.1 96234564CORRF2 1X49W T16 HF E3T L000 FDH G5 3.1 96234576CORRF2 2X28W T16 HF E3T L000 FDH G5 3.4 96234596CORRF2 2X35W T16 HF E3T L000 FDH G5 4.0 96234608CORRF2 2X49W T16 HF E3T L000 FDH G5 4.0 96234620

T16 High Frequency Digital Dimmable Emergency SelfTest versionsCORRF2 1X28W T16 HFD E3T L000 FDH G5 2.7 96234554CORRF2 1X35W T16 HFD E3T L000 FDH G5 3.1 96234566CORRF2 1X49W T16 HFD E3T L000 FDH G5 3.1 96234578CORRF2 2X28W T16 HFD E3T L000 FDH G5 3.4 96234598CORRF2 2X35W T16 HFD E3T L000 FDH G5 4.0 96234610CORRF2 2X49W T16 HFD E3T L000 FDH G5 4.0 96234622

T16 High Frequency Emergency SelfTest Addressable versionsCORRF2 1X28W T16 HF E3X L000 FDH G5 2.3 96234968CORRF2 1X35W T16 HF E3X L000 FDH G5 2.7 96234969CORRF2 1X49W T16 HF E3X L000 FDH G5 2.7 96234970CORRF2 2X28W T16 HF E3X L000 FDH G5 2.6 96234971CORRF2 2X35W T16 HF E3X L000 FDH G5 3.6 96234972CORRF2 2X49W T16 HF E3X L000 FDH G5 4.6 96234973


T26 Switchstart versionsCORRF2 1X18W T26 CP L000 FD G13 1.2 96234906CORRF2 1X36W T26 CP L000 FD G13 2.2 96234472CORRF2 1X58W T26 CP L000 FD G13 2.9 96234486CORRF2 1X70W T26 CP L000 FD G13 3.7 96234500CORRF2 2X18W T26 CP L000 FD G13 2.4 96234907CORRF2 2X36W T26 CP L000 FD G13 3.4 96234508CORRF2 2X58W T26 CP L000 FD G13 4.6 96234522CORRF2 2X70W T26 CP L000 FD G13 5.9 96234536

T26 Switchstart Through Wire versionsCORRF2 1X36W T26 CP TW L000 FD G13 2.3 96234908CORRF2 1X58W T26 CP TW L000 FD G13 3.0 96234909CORRF2 1X70W T26 CP TW L000 FD G13 3.8 96234910CORRF2 2X36W T26 CP TW L000 FD G13 3.5 96234911CORRF2 2X58W T26 CP TW L000 FD G13 4.7 96234912CORRF2 2X70W T26 CP TW L000 FD G13 6.0 96234913

T26 High Frequency versionsCORRF2 1X18W T26 HF L000 FD G13 0.9 96234928CORRF2 1X36W T26 HF L000 FD G13 1.9 96234474CORRF2 1X58W T26 HF L000 FD G13 2.5 96234488CORRF2 1X70W T26 HF L000 FD G13 3.3 96234502CORRF2 2X18W T26 HF L000 FD G13 1.6 96234929CORRF2 2X36W T26 HF L000 FD G13 2.6 96234510CORRF2 2X58W T26 HF L000 FD G13 3.2 96234524CORRF2 2X70W T26 HF L000 FD G13 4.6 96234538

T26 High Frequency Digital Dimmable versionsCORRF2 1X18W T26 HFD L000 FD G13 1.5 96234930CORRF2 1X36W T26 HFD L000 FD G13 2.3 96234476CORRF2 1X58W T26 HFD L000 FD G13 2.8 96234490CORRF2 2X18W T26 HFD L000 FD G13 2.1 96234931CORRF2 2X36W T26 HFD L000 FD G13 2.8 96234512CORRF2 2X58W T26 HFD L000 FD G13 3.5 96234526

T26 High Frequency Though wire versionsCORRF2 1X36W T26 HF TW L000 FD G13 2.0 96234932CORRF2 1X58W T26 HF TW L000 FD G13 2.6 96234933CORRF2 1X70W T26 HF TW L000 FD G13 2.4 96234934CORRF2 2X36W T26 HF TW L000 FD G13 2.7 96234935CORRF2 2X58W T26 HF TW L000 FD G13 3.3 96234936CORRF2 2X70W T26 HF TW L000 FD G13 3.3 96234937

T26 High Frequency Digital Dimmable Through Wire versionsCORRF2 1X36W T26 HFD TW L000 FD G13 2.4 96234938CORRF2 1X58W T26 HFD TW L000 FD G13 2.9 96234939CORRF2 2X36W T26 HFD TW L000 FD G13 2.9 96234940CORRF2 2X58W T26 HFD TW L000 FD G13 3.6 96234941

T26 High Frequency Emergency versionsCORRF2 1X36W T26 HF E3 L000 FD G13 2.3 96234478CORRF2 1X58W T26 HF E3 L000 FD G13 2.8 96234492CORRF2 1X70W T26 HF E3 L000 FD G13 3.6 96234504CORRF2 2X36W T26 HF E3 L000 FD G13 2.8 96234514CORRF2 2X58W T26 HF E3 L000 FD G13 3.8 96234528CORRF2 2X70W T26 HF E3 L000 FD G13 5.2 96234540

T26 High Frequency Emergency Digital Dimmable versionsCORRF2 1X36W T26 HFD E3 L000 FD G13 2.7 96234480CORRF2 1X58W T26 HFD E3 L000 FD G13 3.3 96234494CORRF2 2X36W T26 HFD E3 L000 FD G13 3.4 96234516CORRF2 2X58W T26 HFD E3 L000 FD G13 4.0 96234530

T26 High Frequency Emergency SelfTest versionsCORRF2 1X36W T26 HF E3T L000 FD G13 2.3 96234482CORRF2 1X58W T26 HF E3T L000 FD G13 2.8 96234496CORRF2 1X70W T26 HF E3T L000 FD G13 3.6 96234506CORRF2 2X36W T26 HF E3T L000 FD G13 2.8 96234518CORRF2 2X58W T26 HF E3T L000 FD G13 3.8 96234532CORRF2 2X70W T26 HF E3T L000 FD G13 5.2 96234542

T26 High Frequency Digital Dimmable Emergency SelfTest versionsCORRF2 1X36W T26 HFD E3T L000 FD G13 2.7 96234484CORRF2 1X58W T26 HFD E3T L000 FD G13 3.3 96234498CORRF2 2X36W T26 HFD E3T L000 FD G13 3.4 96234520CORRF2 2X58W T26 HFD E3T L000 FD G13 4.0 96234534

T26 High Frequency Emergency SelfTest Addressable versionsCORRF2 1X36W T26 HF E3X L000 FD G13 2.3 96234974CORRF2 1X58W T26 HF E3X L000 FD G13 2.8 96234975CORRF2 1X70W T26 HF E3X L000 FD G13 3.6 96234976CORRF2 2X36W T26 HF E3X L000 FD G13 2.8 96234977CORRF2 2X58W T26 HF E3X L000 FD G13 3.8 96234978CORRF2 2X70W T26 HF E3X L000 FD G13 5.2 96234979

CorrosionForce Lamps must be ordered separately

www.suntrade.co

m.ua

30


T26 High Frequency versionsCOLDF2 1X36W T26/38 HF TT L000 FD G13 1.88 96234623COLDF2 1X58W T26/38 HF TT L000 FD G13 2.45 96234624COLDF2 2X36W T26/38 HF TT L000 FD G13 2.62 96234625COLDF2 2X58W T26/38 HF TT L000 FD G13 3.17 96234626

ColdForce Lamps must be ordered separately


T26 High Frequency versionsHEATF2 1X36W T26 HF HT L000 FD G13 1.88 96234627HEATF2 1X58W T26 HF HT L000 FD G13 2.45 96234628

HeatForce Lamps must be ordered separately


PMMA Diffuser

T16 High Frequency versionsSTORMF2 AC 2X35W T16 HF L000 FDH G5 5.0 96234965STORMF2 AC 2X49W T16 HF L000 FDH G5 5.0 96234966

T26 High Frequency versionsSTORMF2 AC 2X36W T26 HF L000 FDH G13 4.2 96234981STORMF2 AC 2X58W T26 HF L000 FDH G13 5.6 96234982STORMF2 AC 2X70W T26 HF L000 FDH G13 7.0 96234967

PC Diffuser

T16 High Frequency versionsSTORMF2 PC 2X35W T16 HF L000 FDH G5 5.0 96234983STORMF2 PC 2X49W T16 HF L000 FDH G5 5.0 96234984

T26 High Frequency versionsSTORMF2 PC 2X36W T26 HF L000 FDH G13 4.2 96234944STORMF2 PC 2X58W T26 HF L000 FDH G13 5.6 96234945STORMF2 PC 2X70W T26 HF L000 FDH G13 7.0 96234985

EmergencySTORMF2 PC 2X36W T26 HF E3 L000 FD G13 5.2 96235726STORMF2 PC 2X58W T26 HF E3 L000 FD G13 6.5 96235727

Description SAP CodeFORCE2 28/36 TW KIT* THROUGH WIRE KIT 28/36W 96503163FORCE2 35/49/58 TW KIT* THROUGH WIRE KIT 35/49/58W 96503164FORCE2 70 TW KIT* THROUGH WIRE KIT 70W 96503165FORCE2 FIX KIT QUICK FIT BRACKET (PAIR) 96503166FORCE2 FIX/CH KIT CHAIN SUSPENSION KITS (5 PAIRS) 96503167FORCE2 28/36 RS CLIP KIT STAINLESS STEEL TOGGLES 96503157FORCE2 35/49/58 RS CLIP KIT STAINLESS STEEL TOGGLES 96503158FORCE2 70 RS CLIP KIT STAINLESS STEEL TOGGLES 96503159FORCE2 28/36 PC CLIP KIT POLYCARBONATE TOGGLES 96503160FORCE2 35/49/58 PC CLIP KIT POLYCARBONATE TOGGLES 96503161

StormForce Lamps must be ordered separately

Ordering GuidesAccessories

Accessories Ordering GuideDescription SAP CodeFORCE2 70 PC CLIP KIT POLYCARBONATE TOGGLES 96503162FORCE2 MCA KIT CATENARY SUSPENSION KIT 96233817FORCE2 MRS KIT CONDUIT KIT 96503169FORCE2 BESA KIT BESA BOX KIT 96503168XFORCE2 R 1X28/36/54 REFLECTOR FOR SINGLE 28/36/54W 96235134XFORCE2 R 1X35/49/58/80 REFLECTOR FOR SINGLE 35/49/58/80W 96235135XFORCE2 R 2X28/36 REFLECTOR FOR TWIN 28/36W 96235136XFORCE2 R 2X35/49/58 REFLECTOR FOR TWIN 35/49/58W 96235137

Stainless steel toggles

*Only suitable for use with non-emergency versions

Chain fi xing kit (Fix/Ch kit) Quick fi x bracket (Fix kit) BESA kit

Through wire kit Polycarbonate toggles (PC Clip kit) MRS kit Refl ector

www.suntrade.co

m.ua

31

PhotometricsDimensions

32

113

111

330720900

1164

177287347347

74124184184

106156216216684 18W

1294 36W1594 58W1859 70W

32

70

125

166

330720900

1164

177287347347

74124184184

106156216216684 18W

1294 36W1594 58W1859 70W

32

Single T26 version

Twin T26 version

32

113

111

720900

287347

124184

156216

1294 28/54W1594 35/49/80W

32

70

125

166

720900

287347

124184

156216

1294 28W1594 35/49W

32

Single T16 version

Twin T16 version

Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°

CorrosionForce II Lamp: 1x 58W T26LOR: 0.79 ULOR: 0.16 DLOR: 0.62

Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°

ImpactForce II Lamp: 1x 58W T26LOR: 0.75 ULOR: 0.16 DLOR: 0.59

Cd/1000lm150°

120°

90° 120 80 40 90°

60°60°

30°0°

30°

120°

150°


Cd/1000lm150°

120°

90° 120 40 90°

60°60°

30°0°

30°

120°

150°


80

Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°


Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°


Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°

HeatForce II Lamp: 1x 36W T26LOR: 0.81 ULOR: 0.16 DLOR: 0.65

Cd/1000lm150°

120°

90° 120 80 40 90°

60°60°

30°0°

30°

120°

150°

ColdForce II Lamp: 1x 58W T26LOR: 0.66 ULOR: 0.15 DLOR: 0.51

Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°

HeatForce II Lamp: 1x 58W T26LOR: 0.81 ULOR: 0.16 DLOR: 0.65

Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°


Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°


Cd/1000lm150°

120°

90° 180 120 60 90°

60°60°

30°0°

30°

120°

150°

ColdForce II Lamp: 2x 58W T26LOR: 0.52 ULOR: 0.09 DLOR: 0.43

www.suntrade.co

m.ua


Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifi cations in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifi cations without prior notifi cation or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.



AustriaThorn Licht GmbH Donau-City-Straße 11, 1220 Wien, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: offi [email protected]: www.thornlighting.at

ChinaThorn Lighting (Guangzhou) Operations Ltd,No.12 Lian Yun Road, Eastern Section,GETDD, Guangzhou 510530, ChinaTel: (86) 20 3228 2706Fax: (86) 20 3228 1777E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd332 Hongqi Road, Tianjin 300190,ChinaTel: (86) 22 8369 2303Fax: (86) 22 8369 2302E-mail: [email protected]


DenmarkThorn Lighting A/SAlbuen 44, 6000 Kolding, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601E-mail: [email protected]: www.thornlighting.dk


Hong KongThorn Lighting (Hong Kong) LimitedUnit 4301, Level 43, Tower 1,Metroplaza,223 Hing Fong Road, Kwai Chung, N.T., Hong KongTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]

IndiaThorn Lighting India Pvt. LtdRH-2 Nirav CHS, 636A, 90 Ft. D.P. Road,Near Thakur Polytechnic400 101 Mumbai, IndiaTel: (91) 22285 41056Fax: (91) 22285 1120E-mail: [email protected]: www.thornlighting.com


ItalyThorn Europhane Spa Via G Di Vittorio, 2, Cadriano di Granarolo,Bologna 40057, ItalyTel: (39) 051 763391Fax: (39) 051 763088E-mail: [email protected]: www.thornlighting.it

New ZealandThorn Lighting (NZ) Ltd399 Rosebank Road, Avondale, Auckland 1026PO Box 71134, Rosebank, Auckland 1348Tel: (64) 9 828 7155Fax: (64) 9 828 7591E-mail: [email protected] Website: www.thornlighting.co.nz



RussiaThorn Lighting Novoslobodskaya Str., 21, offi ce 406Business Center “Novoslobodskaya 21”,Moscow 127030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 42E-mail: [email protected]: www.thornlighting.ru

Thorn Lighting Main Offi cesSingaporeThorn Lighting (Singapore) Pte Ltd5 Kaki Bukit Crescent, 04-02 Koyotech Building, 416238 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]

SwedenThorn Lighting ABIndustrigatan, Box 305, SE-261 23Landskrona, SwedenTel: (46) 418 520 00Fax: (46) 418 265 74E-mail: [email protected]: www.thornlighting.se

United Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Offi ce 301, Block E, Airport road, P.O. Box 1200,Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

Thorn Gulf LLC Al Shoala Building, Offi ce 301/2, Block E,Airport road, P.O. Box 22672, Deira,Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood,Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]


International SalesThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood,Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 1915Fax: (44) 20 8732 1911E-mail: [email protected]: www.thornlighting.com


www.suntrade.co

m.ua

Alu-BayA value for money range of high bay luminaires


www.suntrade.co

m.ua

• Glass IP65 cover kit available for aluminium reflectors

• Polycarbonate prismatic cover kits available for prismatic refractors

• High quality light grey painted die-cast aluminium housing

• Pre-installed black wiring cable (H07RNF),1.5m in length with a grey cable gland

• Pre-installed suspension hook

• Suitable for a wide range of lamp types and wattages

• Two reflector options Aluminium or polycarbonate prismatic refractor (Direct/Indirect)

• Rapid installation

• Keyhole slot fixing method for easy connection to the housing

Aluminium reflector with glass cover Prismatic refractor with prismatic cover

High quality durable materials for use in challenging environments, with a choice of reflectors and attachments

250W prismatic refractor Safety wire

250/400W aluminium reflector

www.suntrade.co

m.ua

Lamps 250-400W HSE (SE) high pressure sodium. Cap: E40 250-400W HME (QE) high pressure mercury. Cap: E40 250-400W HIE (ME) metal halide. Cap: E40

Materials/Finish Housing: die-cast aluminium in light grey paint finish Reflectors: aluminium or prismatic polycarbonate Reflector covers: toughened glass or prismatic polycarbonate Suspension hook: zinc plated steel

Installation/Mounting Suitable for single point suspension. All luminaires are supplied with a pre-installed 1.5m (3 x 1mm2) black cable for easy installation. Glass cover required for unprotected HIE lamps or IP65 versions.

Standards Designed and manufactured to comply with EN 60598 Class I Electrical 850°C Fire retardant IK08 Impact resistant IP23 IP65

• Prismatic versions provide direct/indirect light

250

14

Ø485

Ø480

252

289

541

252

380

250

49

Ø560

Ø565

632

250

252

312

37

Ø405

Ø410

564

400/250W aluminium reflector and cover kit 400W prismatic refractor and cover kit 250W prismatic refractor and cover kit

Housing and reflector

250/400W housing and aluminium

reflector

250W housing and 250W PC

prismatic refractor

400W housing and 400W PC

prismatic refractor

Kit cover GL IP65*

Kit cover 250 PR*

Kit cover 400 PR*

250/400W housing and aluminium

reflector

Kit cover GL IP65

*Only needed for use with 250/400W HIE lamps or if dust or mechanical protection is required

Mandatory Optional

IP23 IP65

Attachments

400W prismatic refractor

www.suntrade.co

m.ua

Ordering Guide Lamps to be ordered separately

Description Ilcos Code Socket Weight SAP Code (kg)

With Aluminium reflector ALU-BAY 1X250W HIE/HSE RAL NL ME/SE E40 7.0 96502955ALU-BAY 1X250W HME RAL NL QE E40 6.7 96502956ALU-BAY 1X400W HIE RAL NL ME E40 7.3 96502959ALU-BAY 1X400W HSE RAL NL SE E40 8.0 96502966ALU-BAY 1X400W HME RAL NL QE E40 6.7 96502960 With Prismatic refractor ALU-BAY 1X250W HIE/HSE PC RPR NL ME/SE E40 7.0 96502957ALU-BAY 1X250W HME PC RPR NL QE E40 6.7 96502958ALU-BAY 1X400W HIE PC RPR NL ME E40 8.3 96502961ALU-BAY 1X400W HSE PC RPR NL SE E40 9.0 96502967ALU-BAY 1X400W HME PC RPR NL QE E40 7.7 96502962 Attachments ALU-BAY KIT COVER GL IP65 GLASS COVER KIT 2.5 96502963ALU-BAY KIT COVER 250W PR PRISMATIC 250W COVER KIT 1.2 96502964ALU-BAY KIT COVER 400W PR PRISMATIC 400W COVER KIT 0.7 96502965

Floor area (m2)

ALU-BAY 1X250W HME RAL NL - 300lx

ALU-BAY 1X250W HIE/HSE RAL NL (HIE) - 300lx

ALU-BAY 1X250W HIE/HSE RAL NL (HSE) - 300lx


ALU-BAY 1X250W HIE/HSE RAL NL (HIE) - 500lx

ALU-BAY 1X250W HIE/HSE RAL NL (HSE) - 500lx 0

5

10

15

20

25

30

35

100 150 200 250 300 350 400 450 500

Alu-Bay 250W with aluminium reflectorMounting height = 5m

Num

ber o

f lum

inai

res


ALU-BAY 1X400W HIE RAL NL - 300lx

ALU-BAY 1X400W HSE RAL NL - 300lx


ALU-BAY 1X400W HIE RAL NL - 500lx

ALU-BAY 1X400W HSE RAL NL - 500lx

Alu-Bay 400W with aluminium reflectorMounting height = 6m

100 150 200 250 300 350 400 450 5000

5

10

15

20

25

Num

ber o

f lum

inai

res

Floor area (m2)

Lighting Design Ready Reckoners

The Ready Reckoner provides a very quick and simple guide to know approximately how many fittings will be required to achieve a certain lux level (e.g 250W HSE - 300 lux).

To read these charts look along the horizontal axis showing the

floor area m2 until you reach the required floor space, then move to the curved line which refers to the lamp types and lux level. Now look horizontally following the line to the left, this will indicate the approximate number of luminaires required.

For example: Floor area m2 - 200. Lamp type and lux level - 400W HIE/HSE - 500 lx Approximate number of luminaires - 10 (see Alu-Bay 400W diagram)

www.suntrade.co

m.ua

Alu-Bay is a cost effective range of high bay luminaires available in either 250 or 400W versions. Robust materials plus rapid installation design features, makes installation easy in a variety of applications.

Performance: Offers a wide batwing light distribution resulting in good uniformity. Prismatic refractors provide direct/indirect light

Efficiency: High light output and efficacy

Comfort: Easy installation due to pre-installed electrical cable, suspension hook and reflector keyhole fixing method.

Simple to order

• One box (Includes housing and reflector)

Rapid installation

• Pre-installed cable

• Keyhole reflector fixings

• Pre-installed suspension hook

High protection

• IP23 and IP65

• Robust construction

• Tough aluminium housing

Applications

Typical applications include supermarkets, hypermarkets, DIY chains, heavy industry, exhibition halls and factories etc.


www.suntrade.co

m.ua

Lighting people and placesLighting people and places



Head OfficeThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801Website: www.thornlighting.com

AustraliaThorn Lighting Pty Limited 13 Cooper Street, P O Box 188, Smithfield, NSW 2164, AustraliaTel: (61) 2 9604 4300Fax: (61) 2 9604 4588E-mail: [email protected]: www.thornlight.com.au

AustriaThorn Licht GmbH Donau-City-Straße 11, 1220 Wien, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: [email protected]

ChinaThorn Lighting (Guangzhou) Operations Ltd No.12 Lian Yun Road, Eastern Section, GETDD, Guangzhou 510760, ChinaTel: (86) 20 3228 2706Fax: (86) 20 3228 1777E-mail: [email protected]


Czech RepublicThorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5Czech RepublicTel: (420) 224 315 252Fax: (420) 233 326 313E-mail: [email protected]: www.thornlight.cz

DenmarkThorn Lighting A/S Albuen 44, 6000 Kolding, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601Website: www.thornlight.dk

FranceThorn Europhane SA 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240Website: www.thorn.fr

Hong KongThorn Lighting (Hong Kong) Limited Unit 4301, Level 43, Tower 1, Metroplaza, 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong, ChinaTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]: www.thorn.com.hk

IrelandThorn Lighting (Ireland) Limited 320 Harold’s Cross Road, Dublin 6W, IrelandTel: (353) 1 4922 877Fax: (353) 1 4922 724E-mail: [email protected]


New ZealandThorn Lighting (NZ) Ltd 399 Rosebank Road, P O Box 71134, Rosebank, Auckland 7, New ZealandTel: (64) 9 828 7155Fax: (64) 9 828 7591

NorwayThorn Lighting ASIndustriveien 11, P O Box 63, Skytta 1483, NorwayTel: (47) 6706 2233Fax: (47) 6706 0351E-mail: [email protected]


RussiaThorn Lighting Novoslobodskaya Str., 21, office 406 Business Center “Novoslobodskaya 21”, Moscow 103030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 42E-mail: [email protected] Website: www.thorn.ru

Thorn Lighting Representative Office,1 Artilleriyskaya str., 1 BC ‘Europa House’, St Petersburg 191104, RussiaTel: (7) 812 718 8112Fax: (7) 812 718 8119E-mail: [email protected]: www.thorn.ru

SingaporeThorn Lighting (Singapore) Pte Ltd 5 Kaki Buki Crescent, 04-02 Koyotech Building, 416238 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]: www.thornlight.com.sg

SwedenThorn Lighting ABIndustrigatan, Box 305, SE-261 23 Landskrona, SwedenTel: (46) 418 520 00Fax: (46) 418 265 74E-mail: [email protected]: www.thornlight.se

Thorn Lighting Main OfficesUnited Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838E-mail: [email protected]

Thorn Gulf LLC Al Shoala Building, Office 301/2, Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838E-mail: [email protected]

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.co.uk

International SalesThorn Lighting Limited 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240

Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]


www.suntrade.co

m.ua

Base LEDDelivering superior LED downlighting performance with full controllability and emergency options

www.suntrade.co

m.ua

2

A new LED downlight - delivering 1000 lumens - has been added to the Base LED range

Like its 650 lumen counterpart, Base LED 1000 delivers superior colour quality, efficiency and longevity, but adds extra lighting control and emergency features. Both have the same aperture: 165 mm cut-out.

www.suntrade.co

m.ua

Base LED

1000Halogen QPAR20

26W TC-DEL

Lamp type LED Halogen CFL

Luminaire lumen

1000(LOR 1.0)

1100(LOR 1.0)

936 (LOR 0.52)

Input power (W)

18 75 28.5

Rated life hours ≥50,000 ≥2,500 10,000

3

Energy savingBase LED 1000:At 18W and with an output of 1000 lumens, the downlight produces light comparable to a 75W QPAR halogen fixture, saving approximately 75 per cent in energy consumption.A 1 x 26W compact fluorescent electronic downlight uses about 50 per cent more power than the Base LED to achieve the same light level.Base LED 650: Emitting 650 luminaire lumens, output is equivalent to a 1x18W compact fluorescent or 50W halogen downlight. Using just 12 Watts energy savings are equally impressive.

Superior colour techniqueBase LED delivers warm and neutral white light, in 2700K or 3500K colour temperature options, without emitting any UV or IR radiation. These give an initial Ra > 92 (1000lm)/ Ra >94 (650lm) and these colour rendering values are maintained over the life of the product. This is achieved by adding red LEDs.

DurabilityOngoing lifetime testing predicts a rated life of 50,000 hours to 70 per cent of initial lumens (L70@Ta25°C). Base LED’s electronic, thermal and mechanical design is finely tuned to maximise the rated life for full customer satisfaction and true sustainability.

ApplicationsAvailable with a choice of three inner bezel rings, Base LED 1000 is ideal for many commercial and residential applications:The mirror bright bezel enables use in office spaces (UGR <19).The satin silver bezel lessens direct glare (UGR <22) for entrance areas, common and assembly rooms. The white bezel (UGR <25) gives satisfactory glare quality for corridors, secondary rooms and circulation areas, such as staircases.Base LED 650 features UGR <22 for all available bezel variants.For all downlights, the splash proof IP44 (from below the luminaire) rating extends applications to bathrooms, kitchens or toilet facilities.

Lighting ControlsBase LED 1000 has three control options: • DALI control creates the opportunity to interface with a facility management system, making a significant contribution to energy efficiency and the flexibility of the building as a whole

• SwitchDIM provides simple, cost-effective and extremely user-friendly control via retractive switches. Ideal for small and medium scale applications

• Corridor-function. Instead of being switched-off abruptly if no movement is detected in stairwells, corridors or entrance halls, the lighting level is dimmed to 10 per cent and then switched off after a defined delay. As soon as someone enters the space the light is returned to its full level. For easy control apply Sensor 96100101 SENSALINK MRE SENDLDSW.

Base LED 650 can be externally dimmed or switched: • Dimming 100-25 per cent via standard phase cut dimmers (either leading or trailing edge)

• Applying more sophisticated controls using DALI or DSI Bus-controlled dimming devices.

Emergency lightingBase LED 1000 versions are suitable for use with a central battery DC emergency lighting supply. When the mains supply fails and the DC supply is activated the light output is reduced to approximately 200 lm and DALI control is disabled during DC operation. The recessed versions have a single battery, 3 hour emergency lighting version, as standard. Customised emergency solutions are possible for surface mounted downlights.

3

www.suntrade.co

m.ua

4

PEC

At Thorn we recognise our sustainability responsibilities, and with the PEC programme we have introduced a wide-ranging philosophy that underpins our approach to lighting design and implementation.

Base LED takes advantage of LED development, combining high colour rendering with high luminaire efficiency. Providing all the required features for easy application and installation the range gives specifiers and contractors a freedom of choice not previously available to them, which will have sustainable and financial implications, not only today, but for years to come.

PerformanceThe LED technology delivers high colour rendering, exceeding requirements for commercial lighting. In areas where glare is important, including office spaces, the UGR rating can be easily improved by adding the relevant bezel ring.

Efficiency LED technology reduces power demand and conserves energy. Base LED offers upto 56 luminaire lumens/circuit Watt efficacy exceeding all current building regulation target values. Dimming offers further energy savings and increases efficacy without colour shift. The ability to link lighting controls provides further gains in energy savings and facilitates the provision of lighting at the times required, from single room applications to larger premises.

Integrated loop through wiring capability eases installation even in wide space applications.

ComfortHigh-quality white light (Ra 90+, 2700K and 3500K) creates a warm and welcoming atmosphere. The use of lighting controls can tailor lighting levels to user requirements.

The programme is based on the principle that performance, efficiency and comfort determine the visual effectiveness of lighting.

LEDs offer new opportunities for colour rendition and efficacy. With modern LED light engines, suitable for downlights, colour rendering (Ra) figures above 90 can be easily achieved at negligible sacrifice to efficacy. LED lamp-efficacies already exceed the 1980s figures and are expected to steadily improve.

www.suntrade.co

m.ua

5

Light QualityMost people have become used to the sufficient, but not excellent, colour rendering from compact fluorescent downlights and a colour rendering value of Ra >80 has been considered acceptable for office environments. Perception of colour is often sacrificed to provide increased lamp lumens or more efficient lamps. Incandescent and tungsten halogen sources are becoming outdated for lighting circulation spaces in hospitality and leisure-related facilities, due to their short lamp life, excessive heat and low efficacy, but the colour quality is often preferred.

Thus an efficient light source substitute with natural colour rendition is the preferred requirement.

Base LED has been designed for those who demand colour performance and efficiency. The two are no longer mutually exclusive. The 1000/650 luminaire-lumen downlights have high system efficacy (56/54 lm/W) and high colour rendering (Ra >92). Incandescent lighting can now be, in part, substituted with mimimal reduction in light quality (colour rendition, switch and dimming properties). Compact fluorescent can be substituted, while improving system efficacy,colour performance and dimming.

In a world increasingly focused on energy, yet demanding long life, good quality lighting Base LED downlights offer an obvious solution.

Case Study: University doubles the light for a fifth the costThe Panum Institute, part of Copenhagen University’s Faculty of Health Sciences, was one of the earliest adopters of Base LED. Eighty six Base LED 650 downlights are installed in one of the building’s four lecture theatres where lighting is operated for long periods (see picture above).

By replacing 60W lamps the university has cut its electricity consumption by 80% (from 5.16 kW to 1.03 kW), and retained the quality of light, while the level of illuminance has increased from 110 lux in places to an average 200 lux.

www.suntrade.co

m.ua

6

Average lighting level 50lx 300lx

Total energy consumption 48W 360W

For specific Life Cycle Costing please use the ecoCALC tool at http:// www.thornlighting.com/ecocalc

Lamp12W/18W high

performance Cree LED light engine featuring Cree True White™ technology, Ra >94/>92, CCT 2700K or 3500K, designed for rated life of 50,000 hours (L70@ta25°C)

Materials/FinishLuminaire: die-cast aluminium body with bezel matt white finish and integral/remote driver unit. White decorative bezels of injection moulded PC with active inner ring surface in white (WHI), satin silver (RSB) or mirror bright (RMB).

Installation/MountingRecessed version held in place via two rubber sleeved spring clips; for ceiling thickness between 10-25mm; featuring integral/remote driver with terminal for max. 2x3x1.5mm²/ 2x5x1.5mm² (loop-in, loop-out). Cut-out: Ø 165mm.

Decorative bezel accessories snap easily into place. Surface version mounted to the housing with a twist lock bracket.

Standards Designed and manufactured to comply with EN 60598 Class I Electrical IP44 (recessed version) IP20 (surface mounted version) Emergency lighting (recessed version only) with SelfTest/DALI option available as standard for Base LED 1000.

Specification

To specify state: High colour rendering LED downlight, recessed or ceiling mounted, features 12W LED light engine (True White™ technology) with integral driver, choice of CCT 2700K or 3500K at Ra 94, housing of pressure die-cast aluminium with integral heat sink, bezel matt white finish, for ceiling thickness 10-25mm, held in place by 2 rubber sleeved spring clips, 165mm ceiling cut out, features phase cut dim option using common incandescent or electronic dimming devices. As Thorn Base LED 650.

High colour rendering LED downlight, recessed or ceiling mounted, features 18W LED light engine (True White™ technology) with remote driver, choice of CCT 2700K or 3500K at Ra 92, housing of pressure die-cast aluminium with integral heat sink, bezel matt white finish, for ceiling thickness 10-25mm, held in place by 2 rubber sleeved spring clips, 165mm ceiling cut out, features DALI control as well as switch-dim and corridor function option. As Thorn Base LED 1000.

Schemes Product features

www.suntrade.co

m.ua

≥65

≥149

≥65

10-25Ø165Ø190

≥149

165Ø190

155x83x35≥65 ≥65

10-253

≥65

Ø195

215

BASELED 165 MRE 1X12W LED

30°30°

60°60°

°09°09

°021°021

150° 150°180°

150300450

cd/klm LOR 100%650 lm

BASELED1K 165 MRE 18W LED HFX

30°30°

60°60°

°09°09

°021°021

150° 150°180°

150300450

cd/klm LOR 100%1000 lm

BASELED1K 165 MRE 18W HFX + RSB

30°30°

60°60°

°09°09

°021°021

150° 150°180°

250500750

cd/klm 965 lm LOR 100%

BASELED1K 165 MRE 18W HFX + RMB

30°30°

60°60°

°09°09

°021°021

150° 150°180°

250500750

cd/klm 914 lm LOR 100%

7

Ordering Guide Dimensions

Surface 12W + 18W

12W with white reflector (WHI) 18W with Satin silver reflector (RSB)18W without reflector 18W with Silver bright reflector (RMB)

Ordering Guide Supplied complete with LEDs

Description Weight (kg) SAP Code

Base LED 1000 Recessed, DALI/SwitchDimBASELED1K 165 MRE 18W LED L927 HFX 1.5 96107983BASELED1K 165 MRE 18W LED L935 HFX 1.5 96107984

Base LED 1000 Surface mounted, DALI/SwitchDimBASELED1K 165 MCE 18W LED L927 HFX 2.3 96107987BASELED1K 165 MCE 18W LED L935 HFX 2.3 96107988

Base LED 1000 Recessed, DALI, Emergency lighting/SelfTest/DALI*BASELED1K 165 MRE 18W LED L927 HFX E3TX 3.2 96107989BASELED1K 165 MRE 18W LED L935 HFX E3TX 3.2 96107990

Base LED 1000 AccessoriesBASELED1K 165 WHI BEZELRING WHI 0.1 96107993BASELED1K 165 WHI BEZELRING RSB 0.1 96107994BASELED1K 165 WHI BEZELRING RMB 0.1 96107995Base LED 650 RecessedBASELED 165 MRE 1X12W LED L927 1.3 96107294BASELED 165 MCE 1X12W LED L935 1.3 96107303

Base LED 650 Surface mountedBASELED 165 MCE 1X12W LED L927 2.2 96107308BASELED 165 MCE 1X12W LED L935 2.2 96107310

Base LED 650 AccessoriesBASELED1K 165 WHI BEZELRING WHI 0.1 96107393BASELED1K 165 WHI BEZELRING RSB 0.1 96107394

* Available early 2011Order decorative inner bezel rings separately.L927 - 2700K, L935 - 3500K, WHI - white, RSB - satin silver, RMB - mirror bright

Recessed 18W Recessed 12W

Lighting Controls e-Control is Thorn’s

initiative to increase the use of dimming and lighting control in products and lighting solutions.

The continuing importance of efficient energy use (on both cost and environmental grounds), together with a need for more flexible application of lighting, has led to a reassessment of lighting techniques and given a fresh impetus to the drive for more efficient controls.

www.suntrade.co

m.ua


www.pefc.org

Thorn Lighting Main OfficesThorn Academy of Light Green Lane Industrial Estate, Spennymoor County Durham DL16 6HL, UK Tel: (44) 1388 420 042 E-mail: [email protected] Website: www.thornacademyoflight.com

AustraliaThorn Lighting Pty Limited 43 Newton Road, Wetherill Park NSW 2164 Tel: (02) 8786 6000 Fax: (02) 9612 2700 E-mail: [email protected] Website: www.thornlighting.com.au

AustriaThorn Licht GmbH Donau-City-Straße 1, 1220 Wien, Austria Tel: (43) 1 202 66 11 Fax: (43) 1 202 66 11 82712 E-mail: [email protected] Website: www.thornlighting.at

ChinaThorn Lighting (Guangzhou) Operations Ltd, No.12 Lian Yun Road, Eastern Section, GETDD, Guangzhou 510530, China Tel: (86) 20 3228 2706 Fax: (86) 20 3228 1777 E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd 332 Hongqi Road, Tianjin 300190, China Tel: (86) 22 8369 2303 Fax: (86) 22 8369 2302 E-mail: [email protected]

Czech Republic Thorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5 Czech Republic Tel: (420) 224 315 252 Fax: (420) 233 326 313 E-mail: [email protected] Website: www.thornlighting.cz

DenmarkThorn Lighting A/S Kanonbådsvej 12B, Holmen, 1437 København K, Denmark Tel: (45) 76 96 36 00 Fax: (45) 76 96 36 01 E-mail: [email protected] Website: www.thornlighting.dk

FranceThorn Europhane SA 156 Boulevard Haussmann, Cedex 08, Paris 75379, France Tel: (33) 1 49 53 6262 Fax: (33) 1 49 53 6240 Website: www.thornlighting.fr

Hong Kong Thorn Lighting (Hong Kong) Limited Unit 4301, Level 43, Tower 1, Metroplaza,223 Hing Fong Road, Kwai Chung, N.T., Hong Kong Tel: (852) 2578 4303 Fax: (852) 2887 0247 E-mail: [email protected]

IndiaThorn Lighting India Pvt. Ltd. 501, 5th Floor, Tanishka Opp. Gundecha Industrial Estate Akurli Road, Kandivali (E), Mumbai – 400 101, India Tel: (91) 22-67839100 Fax: (91) 22-67839106 E-mail: [email protected] Website: www.thornlighting.com

International Sales Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UK Tel: (44) 20 8732 9800 Fax: (44) 20 8732 9819 E-mail: [email protected] Website: www.thornlighting.com

Ireland Thorn Lighting (Ireland) Limited Century House Harolds Cross Road Dublin 6W Tel: (353) 1 4922 877 Fax: (353) 1 4922 724 E-mail: [email protected] Website: www.thornlighting.co.uk

ItalyThorn Europhane Spa Via G Di Vittorio, 2, Cadriano di Granarolo, Bologna 40057, Italy Tel: (39) 051 763391 Fax: (39) 051 763088 E-mail: [email protected] Website: www.thornlighting.it

New ZealandThorn Lighting (NZ) Ltd 399 Rosebank Road, Avondale, Auckland 1026 PO Box 71134, Rosebank, Auckland 1348 Tel: (64) 9 828 7155 Fax: (64) 9 828 7591 E-mail: [email protected] Website: www.thornlighting.co.nz

NorwayThorn Lighting AS Strømsveien 344, 1081 Oslo, Norway Tel: (47) 22 82 07 00 Fax: (47) 22 82 07 01 E-mail: [email protected] Website: www.thornlighting.no

PolandThorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wrocław 50-513, Poland Tel: (48) 71 7833 740 Fax: (48) 71 3366 029 E-mail: [email protected] Website: www.thornlighting.pl

RussiaThorn Lighting Novoslobodskaya Str., 21, office 406 Business Center “Novoslobodskaya 21”, Moscow 127030, Russia Tel: (7) 495 981 35 41 Fax: (7) 495 981 35 42 E-mail: [email protected] Website: www.thornlighting.ru

Singapore Thorn Lighting (Singapore) Pte Ltd 5 Kaki Bukit Crescent, 04-02 Koyotech Building, 416238 Singapore Tel: (65) 6844 5800 Fax: (65) 6745 7707 E-mail: [email protected]

SwedenThorn Lighting AB Industrigatan, Box 305, SE-261 23 Landskrona, Sweden Tel: (46) 418 520 00 Fax: (46) 418 265 74 E-mail: [email protected] Website: www.thornlighting.se

United Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, Airport road, P.O. Box 1200, Deira, Dubai, UAE Tel: (971) 4 2940181 Fax: (971) 4 2948838 E-mail: [email protected] Website: www.thornlighting.com

United Kingdom Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UK Tel: (44) 20 8732 9800 Fax: (44) 20 8732 9801 E-mail: [email protected]

Thorn Olympics Sports Lighting Team Tel: 07785 251 438 E-mail: [email protected] Website: www.thornlighting.co.uk


Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated. Printed on Luxo Light.

Publication No: 491 (IS) Publication Date: 09/10

www.suntrade.co

m.ua

Concavia RangeInnovative and robust range of high bay luminaires

www.suntrade.co

m.ua

Concavia

www.suntrade.co

m.ua

3

The innovative Concavia high bay luminaire familyensures choice and flexibility, offering three sizesincluding Small, Large and Extra Large, togetherwith a wide range of lamp types and wattagecombinations.

• The option of reflectors and decorativeaccessories allows the Concavia range to beadapted to create lighting solutions for a modernarchitectural appearance.

• A range of wire guards and covers improvesafety and protection, while the option of a ringlouvre provides essential glare control.

• Concavia has a robust construction and ismanufactured using high quality materials.

• Suitable for high ambient temperatures.

• Option of IP23 or IP65 to guarantee functionalityof the product in dusty or wet surroundings,whilst still maintaining safety and durability.

A key element of the range is that Concavia offerstool-free installation and maintenance. For ease ofinstallation the product is equipped with a mainsentry cable, therefore no access is required into themain body of the fitting. This ensures that the IP65rating is maintained, providing a high level ofsafety, and saving time and money.

Concavia offers opportunities to create lightingsolutions for a range of commercial andindustrial applications such as retail, sports halls,factories and warehouses through to toughindustrial environments.

For more information on applications please referto page 5.

www.suntrade.co

m.ua

4

The main design focus for theConcavia family has beenfunctionality, combined with aunique aesthetical appearance,outstanding performance, andexceptional technical aspects

www.suntrade.co

m.ua

5

Applications

Decorative• Retail & shops• Malls• Showrooms• Exhibition and event halls• Airport atriums• Railway stations

Industry• Factory and production areas• Heavy industry• Foundries• Warehouses• Dockyards• Power stations

Sports• Indoor sports facilities• Skating rinks• Recreational centres

Design, aesthetics and a choiceof lamps are a key consideration,where there is a need to create a modern touch, whilst stillmaintaining a relaxed environment.

When creating a particularambience in a showroom or aretail application, Concavia Sand L offers a unique appearancewithout compromising quality,safety or reliability.

There are several critical factorswhich need to be taken intoaccount to ensure a smooth andcontinous operation withinindustrial applications. Theseinclude high quality materials,IP ratings, enhanced performanceto limit maintenance requirementsand suitability for environmentswith higher ambient temperatures.

Concavia L and XL are an idealchoice for these types ofapplication, they are easy toinstall, provide excellent LOR andoffer IP23 or IP65 for tougherindustrial surroundings.

For most sporting applicationsfunctionality and productperformance are essential.Glare control and IP ratings needto ensure optimal performanceeven at low temperatures, suchas skating rinks.

Concavia L or XL are wellequipped to provide the perfectsolution for these applications.

The standard ambienttemperature for testing luminairesaccording to EN 60598 is 25°C,and that is what most competitors’products achieve. However, veryoften, especially in industrialapplications, the ambienttemperature where high bayfittings are installed is much higher.

‘Thorn has set its own standard’to suit more realistic conditions.All Concavia S and L versionswith aluminium reflectors havebeen tested at an ambienttemperature of 35°C. Naturallythere are versions which can beused in even higher ambienttemperatures but as long as the

temperature does not exceed35°C, users do not have toconsider which is the correctluminaire to use. For thoseversions which can operate inhigher ambient temperatures,these have been highlighted inthe ordering guides.

Setting the Standard @ 35°C

www.suntrade.co

m.ua

6

Key Features and Benefits

The Concavia family has beendesigned with functionality, safetyand overall product performancein mind, offering many uniquefeatures and benefits

Ambient Temperature

• Core Concavia range has been tested to anambient temperature of 35°C, with severaldedicated versions operating at higher ambienttemperatures, for further information see page 13

• Guaranteed ‘start-up’ at temperatures down to -30°C

• Aluminium housing with cooling-fins improvesheat flow

Safety

• Timed ignitors prevent defective lamps from flashing• High safety level achieved through the use of timed ignitors• Thermally protected ballasts eliminate the risk of over heating• High IP rating ensures long maintenance cycles• Limited surface temperatures • Auxiliary lamp options - if the power source is cut, once power is

restored to the luminaire it immediately provides minimum lux level

Consistent tool-free installation and assembly

• Option of quick fix brackets for any suspension method• Quick fix bracket simply clips on the main housing, there

is no need for any tools• Reflector design with unique locking device• No tools required to make electrical connection to

luminaire, due to pre-installed 1.5m mains entrycable (LSOH)

• Tool-free installation. Easy to install wire guard andglass cover accessories.

6

www.suntrade.co

m.ua

7

Innovation

• IP65 versions equipped with a GORETM membrane vent• Allows air pressure equalisation, preventing the ingress

of air and moisture around seals, thus protecting electronic components

• Moisture vapour permeable to help aid reduction in condensation• Assists in maintaining performances levels

Lamps and gear

• Wide range of lamps including innovative lamp solutions, such asQL lamps and 1000W lamps

• QL lamps provide extensive lamp life• ‘Fit and forget’ concept – minimum operating lifetime of 60,000 hours• Ideal for applications where maintenance is difficult or costly

e.g. where access is restricted• 1000W lamps allow less luminaires to be used in very high

mounting applications or where uniformity is less important• Possible to run metal halide lamps with sodium gear which

means higher lumen output

For more information on lamp and gear combinations please refer to page 15

7

Material and design

• Innovative and striking aesthetical appearance to suit design sensitive applications

• Choice of three sizes to suit a variety of applications• Use of high quality aluminium materials • Robust, thermally optimised contruction• Range of aesthetical reflectors and accessories

for creating the perfect lighting solution

www.suntrade.co

m.ua

8

Concavia S

A range of versatile and compactreflector fittings offering highperformance and uniqueaesthetical appearance for use inmany commercial applications

• Suitable for a wide range oflamp types and wattages

• Option of aluminium, plasticand glass reflectors offeringdirect/indirect distribution,each with individualaesthetical appearance

• Puristic and innovative designsuits modern building architecture

• High quality cast aluminiumhousing ensures functionalityand durability

• Tested at an ambienttemperature of 35°C

• Pre-installed with1.5m(3 x 1mm2) mains cable foreasy electrical connectionand installation

Lamps42-57W TC-TEL (FSM)

Compact Fluorescent Cap: GX24q85W LMG-lhf (FSI)

Induction lamp60-250W QT (HSG)

Halogen Lamp Cap: E2760-200W A (IA)

Incandescent Cap: E2770-150W HIE (ME) Metal

Halide Lamp Cap: E2770W HIPAR (MR) Metal

Halide Lamp Cap: E2770-150W HIT (MT) Metal

Halide Lamp Cap: G12

Materials/FinishGearbox: extruded and die castaluminium, silver anodisedpainted finishReflectors: high-puritysandblasted aluminium,prismatic polycarbonate,acrylic or glass Reflector covers: prismaticor toughened glassSuspension brackets: stainless steel

Installation/MountingSuitable for single pointsuspension on wire, chain,catenary suspension or twin-wireunit including ceiling rose. Allluminaires are supplied with apre-installed 1.5m (3 x 1mm2) greyLSOH cable for easy tool-freeinstallation. Cover needed for allunprotected HIE and HIT lamps.

StandardsDesigned and manufactured tocomply with EN 60598

Class I Electrical2 Nm (wire guard)6 Nm (glass cover)

IP23 1

1In preparation

SpecificationTo specify state:High bay reflector luminaire for42-57W TC-TEL compactfluorescent, 85W LMG-lhfinduction, 60-250W QThalogen, 60-200W (IA)incandescent, 70-150W HIEmetal halide, 70W HIPAR metalhalide, 70-150W HIT metalhalide lamps with tool-freeinstallation, pre-installed 1.5m(3 x 1mm2) LSOH mains cable,IP23 aluminium housing in silver,anodised finish, sandblastedaluminium, prismaticpolycarbonate, acrylic or glassreflector, stainless steel suspensionbrackets, tested at an ambienttemperature of 35°C. As Thorn Concavia S

• A range of suspensionoptions to suitvarious applications

• Glass covers andwire guards availablefor improved safetyand protection

• Tool-free installationand handling

www.suntrade.co

m.ua

9

Concavia L

A durable high bay luminaireoffering performance, high-techappearance and flexibility tosuit most industrial and largecommercial applications

• Suitable for a wide selectionof lamp types and wattagesup to 400W

• Auxiliary lamp option

• A high safety level is achievedthrough timed ignitors andthermally protected gear

• Choice of IP23 or IP65protection ensure safetyand performance in dustyor wet environments

• A combination of high qualitymaterials and a robustconstruction ensure highperformance in environmentswith high ambient temperaturesand tough surrounds


SpecificationTo specify state:High bay reflector luminaire forHIE/HSE and HME 250/400W(with timed ignitors and thermallyprotected gear) or LMG-LHF165W lamps, with tool-freeinstallation, pre-installed 1.5m(3 x 1mm2) LSOH mains cable,aluminium housing IP23 withsilver and natural finish,IP65 with silver and anodisedfinish, venting membrane,sandblasted aluminium,prismatic polycarbonate, acrylicor glass reflector, stainless steelsuspension brackets, tested at anambient temperature of 35°C.As Thorn Concavia L


• Pre-installed with1.5m (3 x1mm2)mains cable for easy electricalconnection and installation

• Puristic and high techaesthetics to suit designsensitive applications

• A range of suspension optionsto suit various applications

• A wide range of aestheticalreflectors providingdirect/indirect distribution

• Includes unique GORETM

membrane vent (‘breather’)allowing air pressureequalisation, preventing theingress of air and moisturearound seals

Installation/MountingSuitable for single pointsuspension on wire, chain,catenary suspension or twin-wireunit. All luminaires are suppliedwith a pre-installed 1.5m(3 x 1mm2) grey LSOH cable foreasy and tool-free installation.Cover needed for all unprotectedHIE lamps or IP65 versions.StandardsDesigned and manufactured tocomply with EN 60598

Class I ElectricalSupply voltage:220 – 240 Volts, 50-60Hz.Tapped ballasts to support marketsoutside the harmonised 230V (EU)2 Nm (wire guard)6 Nm (glass cover)

IP23 IP65 1

1In preparation

Lamps165W LMG – lhf (FSI)

Induction Lamp250 – 400W HIE (ME)

Metal Halide Lamp Cap: E40250 – 400W HSE (SE) High

Pressure Sodium Lamp Cap: E40250 – 400W HME (QE) High

Pressure Mercury Lamp Cap: E40

Materials/FinishGearbox: extruded and die castaluminium, silver, natural finishfor IP23 and silver, anodisedfinish for IP65Reflectors: high-puritysandblasted aluminium, prismaticpolycarbonate, acrylic or glassReflector covers: prismatic ortoughened glassSuspension brackets: stainless steel

www.suntrade.co

m.ua

10

Concavia XL

A robust and durable high bayluminaire with exceptionallyhigh wattages for specialistindustrial and very highmounting applications

• Specifically designed for usewith 1000W lamps, reducingthe number of luminairesneeded in very high mountingapplications or whereuniformity is less important

• A combination of high qualitymaterials and a robustconstruction ensures highperformance in environmentswith higher ambient temperaturesand tough surrounds

• IP65 protection ensuring safetyand performance in wet anddusty environments




• Glass cover available forimproved safety and protection

• A range of suspension optionsto suit various application

• Pre-installed with 1.5m(3 x 1mm2) mains cable foreasy electrical connectionand installation

Lamps1000W HIE (ME) Metal

Halide Lamp Cap: E401000W HSE (SE) High

Pressure Sodium Lamp Cap: E401000W HME (QE) High


Materials/FinishGearbox: extruded and die castaluminium, silver, anodised finishReflectors: high-puritysandblasted aluminiumReflector covers: toughened glassSuspension brackets: stainless steel

Installation/MountingSuitable for single pointsuspension on wire, chain, ortwin-wire unit. All luminaires aresupplied with a pre-installed1.5m(3 x 1mm2) grey LSOH cable foreasy and tool-free installation.Cover needed for all unprotectedHIE lamps or IP65.

Standards Designed and manufactured tocomply with EN 60598

Class I ElectricalSupply voltage:220 – 240 Volts, 50-60Hz.Tapped ballasts to supportmarkets outside the harmonised230V (EU) 6 Nm (glass cover)

IP65 1

1In preparation

SpecificationTo specify state:High bay reflector luminaire forHIE/HSE and HME 1000Wlamps (with timed ignitors andthermally protected gear) withtool-free installation, pre-installedwith1.5m (3 x 1mm2) LSOH mainscable, IP65 with silver andanodised finish, ventingmembrane, sandblastedaluminium reflector and stainlesssteel suspension brackets. As Thorn Concavia XL

www.suntrade.co

m.ua

11

125

261

Ø320

217

Ordering guidesDimensionsPhotometric Data

Aluminium reflector Prismatic refractor and prismatic cover

Deco KIT with glass refractorGlass refractor

Description Ilcos Socket Wt SAP Code (Kg) Code

HousingCONCAVIA S 1X60-250W QT/A E27 NL HSG E27 1.7 96218692CONCAVIA S 1X42W TC-TEL HF LI840 FSM GX24Q 1.9 96218687CONCAVIA S 1X42W TC-TEL HFD LI840 FSM GX24Q 2.0 96218688CONCAVIA S 1X57W TC-TEL HF LI840 FSM GX24Q 1.9 96218689CONCAVIA S 1X57W TC-TEL HFD LI840 FSM GX24Q 2.0 96218690CONCAVIA S 1X85W QL LI FSI 3.0 96218691CONCAVIA S 1X70W HIE/HIPAR LI HIE ME/MR E27 3.8 96218693CONCAVIA S 1X70W HIE/HIPAR LI HIPAR ME/MR E27 3.8 96218694CONCAVIA S 1X150W HIE LI ME/MR E27 4.5 96218695CONCAVIA S 1X70W HIT LI MT G12 3.5 96218696CONCAVIA S 1X70W HIT HF LI MT G12 2.2 96218697CONCAVIA S 1X150W HIT LI MT G12 4.4 96218698CONCAVIA S 1X150W HIT HF LI MT G12 2.7 96218699HF - High frequency, HFD - High frequency dimmable, LI - Lamp included, NL - Lamp not included

Description Wt (Kg) SAP Code

CONCAVIA S RAL ALUMINIUM REFLECTOR 0.5 96218701CONCAVIA S AC RPR DI ACRYLIC PRISMATIC REFRACTOR, 1.0 96218702

DIRECT/INDIRECTCONCAVIA S PC RPR DI POLYCARBONATE PRISMATIC 1.0 96228969

REFRACTOR, DIRECT/INDIRECTCONCAVIA S RGL DI GLASS PRISMATIC REFRACTOR, 4.5 96218704

DIRECT/INDIRECTCONCAVIA S KIT RAL DI ALUMINIUM REFLECTOR INSERT 0.15 96229608

FOR DIRECT/INDIRECT REFLECTORSCONCAVIA KIT DECO DECORATIVE ATTACHMENT 0.7 96218706

(REFLECTOR ARMS)CONCAVIA S KIT COVER GL GLASS COVER, KIT 0.8 96218707CONCAVIA S KIT COVER PR PRISMATIC COVER, KIT 0.35 96218708CONCAVIA S KIT WG WIRE GUARD, KIT 0.10 96218709CONCAVIA S KIT CRL CIRCULAR RING LOUVRE, KIT 0.25 96218710

Ordering Guide. Supplied complete with lamp. For complete fitting please order suspension kit, housing, reflector andattachments individually.

Concavia S - aluminium reflectorLamp: 1 x 150W HIELOR: 0.80 SHR max: 1.77 LMC: C

Concavia S - aluminium reflectorLamp: 1 x 57W TC-TELLOR: 0.74 SHR max: 1.90 LMC: C

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Attachments

Concavia S

Concavia suspension kit

CONCAVIA S

Accessories

Housing

Reflectors

Attachments

RAL

KIT COVERGL*

KIT COVERPR*

KIT COVERPR*

KIT WG KIT CRL

AC RPR DI PC RPR DI RGL DIKIT

DECO

*Only needed for lamp reason or if dust or mechanical protection is required.

Mandatory Optional

KITDECO

KIT RALDI

KIT RALDI

KIT RALDI

Housing Concavia S RAL

www.suntrade.co

m.ua

12


IP23 HousingCONCAVIA L 1X165W LMG-LHF IP23 LI FSI 6.9 96218711CONCAVIA L 1X250W HIE IP23 LI ME E40 7.6 96218712CONCAVIA L 1X250W HIE/HSE IP23 LI HSE SE E40 7.6 96218716CONCAVIA L 1X250W HIE/HSE IP23 LI HIE ME E40 7.6 96218717CONCAVIA L 1X250W HME IP23 LI QE E40 7.6 96218724CONCAVIA L 1X400W HIE IP23 LI ME E40 9.0 96218714CONCAVIA L 1X400W HIE/HSE IP23 LI HSE SE E40 9.0 96218720CONCAVIA L 1X400W HIE/HSE IP23 LI HIE ME E40 9.0 96218721CONCAVIA L 1X400W HME IP23 LI QE E40 9.0 96218726

IP23 Housing with Auxiliary LampCONCAVIA L 1X250W HIE AUX IP23 LI ME E40 7.9 96218713CONCAVIA L 1X250W HSE AUX IP23 LI HSE SE E40 7.9 96218718CONCAVIA L 1X250W HSE AUX IP23 LI HIE SE E40 7.9 96218719CONCAVIA L 1X250W HME AUX IP23 LI QE E40 7.9 96218725CONCAVIA L 1X400W HIE AUX IP23 LI ME E40 9.3 96218715CONCAVIA L 1X400W HSE AUX IP23 LI HSE SE E40 9.3 96218722CONCAVIA L 1X400W HSE AUX IP23 LI HIE SE E40 9.3 96218723CONCAVIA L 1X400W HME AUX IP23 LI QE E40 9.3 96218727


IP65 Housing with Auxiliary LampCONCAVIA L 1X250W HIE AUX IP65 LI ME E40 7.9 96218732CONCAVIA L 1X250W HSE AUX IP65 LI HSE SE E40 7.9 96218737CONCAVIA L 1X250W HSE AUX IP65 LI HIE SE E40 7.9 96218738CONCAVIA L 1X250W HME AUX IP65 LI QE E40 7.9 96218744CONCAVIA L 1X400W HIE AUX IP65 LI ME E40 9.3 96218734CONCAVIA L 1X400W HIE/HSE AUX IP65 LI HIE SE E40 9.3 96218742CONCAVIA L 1X400W HSE AUX IP65 LI HSE SE E40 9.3 96218741CONCAVIA L 1X400W HME AUX IP65 LI QE E40 9.3 96218746LI - Lamp included



Wide reflector

Narrow reflector with glass cover

Prismatic refractor

Glass refractor

Prismatic refractor with prismatic cover

Narrow reflector

Wide reflector with glass cover


CONCAVIA L RAL WD ALUMINIUM REFLECTOR, WIDE DISTRIBUTION 1.0 96218749CONCAVIA L RAL NW ALUMINIUM REFLECTOR, NARROW DISTRIBUTION 1.0 96218750CONCAVIA L AC RPR DI ACRYLIC PRISMATIC REFRACTOR, DIRECT/INDIRECT 3.0 96218751CONCAVIA L PC RPR DI POLYCARBONATE PRISMATIC REFRACTOR, DIRECT/INDIRECT 3.0 96228968CONCAVIA L RGL DI GLASS PRISMATIC REFRACTOR, DIRECT/INDIRECT 9.5 96218752CONCAVIA L KIT COVER GL IP65 GLASS COVER IP65, KIT 2.5 96218754CONCAVIA L KIT COVER PR PRISMATIC COVER, KIT 1.0 96218755CONCAVIA L KIT WG WIRE GUARD, KIT 0.15 96218756CONCAVIA L KIT CRL CIRCULAR RING LOUVRE , KIT 0.35 96218757

374

163

Ø503

359

Ø503

359

Concavia L

Attachments

Housing Concavia L RAL WD Concavia L RAL NW

www.suntrade.co

m.ua


CONCAVIA L IP23

Accessories

Housing

Reflectors

Attachments

RAL WD

KIT COVERGL IP65*

KIT COVERPR*

KIT WG KIT CRL

RAL NW PC RPR DI RGL DI

IP23

AC RPR DI


Mandatory Optional

13

Concavia L - IP23 wide reflectorLamp: 1 x 400W HSELOR: 0.88 SHR max: 2.11 LMC: C

Concavia L - IP23 narrow reflectorLamp: 1 x 400W HSELOR: 0.85 SHR max: 1.26 LMC: C

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Although the Concavia range has been tested at an ambienttemperature of 35°C, there are some exceptions. Versions withQL Induction lamps can only be operated at 25°C, but pleasefind in the table below the versions which can be used forhigher ambient temperatures:

Description *Max. Ambient Temperature °CIP23CONCAVIA L 1x250W HIE IP23 LI 50CONCAVIA L 1x250W HIE/HSE IP23 LI HSE 55CONCAVIA L 1x250W HIE/HSE IP23 LI HIE 50CONCAVIA L 1x250W HME IP23 LI 45CONCAVIA L 1x400W HME IP23 LI 40IP65CONCAVIA L 1x250W HIE IP65 LI 50CONCAVIA L 1x250W HIE/HSE IP65 LI HSE 50CONCAVIA L 1x250W HIE/HSE IP65 LI HIE 50CONCAVIA L 1x250W HME IP65 LI 45*to reach the stated ambient temperatures please ensure that the ballast tapping is set in linewith the supply voltage

Ambient temperatures


IP65

CONCAVIA L IP65

RAL WD

KIT COVERGL IP65

KIT WG KIT CRL

RAL NW

www.suntrade.co

m.ua

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Concaviasuspension

kit

CONCAVIA XL IP65

RAL

KIT COVERGL*

Accessories

Housing

Reflectors

Attachments

*Only needed for IP65 or HIE(lamp requirement)

14

Accessoriesfor S, L & XL

Description SAP Code

CONCAVIA KIT FIX/CH FIXING CLIP AND HOOK FOR CHAIN SUSPENSION 96218763CONCAVIA KIT MSW1 2M SINGLE WIRE SUSPENSION KIT, 2M LONG 96218764CONCAVIA KIT MSW1 4M SINGLE WIRE SUSPENSION KIT, 4M LONG 96218765CONCAVIA KIT MSW2 2M TWIN WIRE SUSPENSION KIT, 2M LONG 96218766CONCAVIA KIT MSW2 4M TWIN WIRE SUSPENSION KIT, 4M LONG 96218767CONCAVIA KIT FIX MCA* FIXING CLIP AND HOOK BRACKET FOR CATENARY SUSPENSION KIT 96218768CONCAVIA KIT FIX/AV ANTI VIBRATION FIXING KIT 96218770CONCAVIA KIT FIX/SUP SUPPLEMENTARY SUSPENSION KIT 96218771*Not suitable for Concavia XL

Chain suspension Catenery suspension kit Single wire suspension


Housing IP65CONCAVIA XL 1X1000W HIE IP65 LI ME E40 15.0 96218758CONCAVIA XL 1X1000W HSE IP65 LI SE E40 15.0 96218759CONCAVIA XL 1X1000W HME IP65 LI QE E40 15.0 96218760LI - Lamp included



Concavia XLDescription Wt (Kg) SAP Code

AttachmentsCONCAVIA XL RAL ALUMINIUM REFLECTOR 1.5 96218761CONCAVIA XL KIT COVER GL IP65 GLASS COVER IP65, KIT 3.3 96218762

504

163

Ø574

481

Concavia XL - open reflectorLamp: 1 x 1000W HSELOR: 0.78 SHR max: 1.49 LMC: E

Concavia XL - reflector fitted with glassLamp: 1 x 1000W HIELOR: 0.69 SHR max: 1.61 LMC: E

Concavia XL

Attachments

The suspension brackets have tobe ordered separately forindividual fittings. This providesflexibility and allows a choice ofsuspension options for aestheticalor functional applications.

www.suntrade.co

m.ua

0

2

4

6

8

10

12

14

16

18

200 300 400 500 600 700 800 900 1000

Num

ber o

f lum

inai

res

1000W HSE - 300 lux

1000W HSE - 500 lux

1000W HIE - 300 lux

1000W HIE - 500 lux

1000W HME - 300 lux

1000W HM - 500 lux

Concavia XL

with reflector RAL

Mounting height = 12m

Floor area m2

16

14

12

10

8

6

4

2

0100 150 200 250 300 350 400 450 500

Num

ber o

f lum

inai

res

Floor area m2

400W HSE/HIE -HSE 300 lux


400W HSE/HIE -HIE 300 lux


400W HIE - 300 lux

400W HIE - 500 lux

400W HME - 300 lux

400W HME - 500 lux

Concavia L

with reflector RAL WD


0

5

10

15

20

25

30

35

40

45

10 20 40 60 80 100 120 140 160 180 200

Num

ber o

f lum

inai

res

Floor area m2

57W TC-TEL - 300 lux


150W HIE - 500 lux

150W HIE - 300 lux

Concavia S

with reflector RAL


Planning and lamp info

Lamps and Operation

0

2

4

6

8

10

12

14

16

18

200 300 400 500 600 700 800 900 1000

Num

ber o

f lum

inai

res

1000W HSE - 300 lux

1000W HSE - 500 lux

1000W HIE - 300 lux

1000W HIE - 500 lux

1000W HME - 300 lux

1000W HM - 500 lux

Concavia XL

with reflector RAL


Floor area m2

16

14

12

10

8

6

4

2

0100 150 200 250 300 350 400 450 500

Num

ber o

f lum

inai

res

Floor area m2





400W HIE - 300 lux

400W HIE - 500 lux

400W HME - 300 lux

400W HME - 500 lux

Concavia L



0

5

10

15

20

25

30

35

40

45

10 20 40 60 80 100 120 140 160 180 200

Num

ber o

f lum

inai

res

Floor area m2



150W HIE - 500 lux

150W HIE - 300 lux

Concavia S

with reflector RAL


The Ready Reckoner provides a very quick and simple guide to know approximately how many fittings will be required to achieve a certain lux level (with a certain lamp eg. 57W TC-TEL - 500 lux).

To read these charts look along the horizontal axis showing the floorarea m2 until you reach the required floor space, then move to thecurved line which refers to the lamp types and lux level. Now lookhorizontally following the line to the left, this will indicate theapproximate number of luminaires required.

For example:

Concavia S

Floor area m2 - 120Lamp type and lux level - 57W TC-TEL - 500 luxApproximate number of luminaires - 28(Please see Concavia S diagram)

The Concavia family offers a wide selection of different lamps.Concavia L and XL mainly focus on HID technology, which meansmetal halide, high pressure sodium and mercury lamps.

To make the right choice in terms of light sources can be easy, whenknowing some simple basics about the different lamps:

• HIE (metal halide) are very efficient, offer very high lumen packagesand good colour rendering. The main applications, from Industry toRetail, are nearly unlimited.

• HSE (high pressure sodium) lamps offer a very long lifetime andexcellent efficiency. However it does not offer the colour renderinglevel of a HIE lamp and are mainly used in Industry.

• HME (high pressure mercury) are mainly used for simple industrial applications.

HID lamps always need gear sets, however HIE (metal halide) lampsshow quite a special functionality – they can be run on HIE or on HSEgear. This may have an impact on colour rendering and colourtemperature, but the main result is a much higher lumen-output ifoperated at HSE gear, as shown in the table below with a 400W HIElamp (reference: OSRAM HQI-E 400/D)

Concavia Lamp and ballast Luminous flux

1/400W HIE LI HIE lamp operated on HIE ballast 26.000 lm1/400W HIE/HSE LI HIE HIE lamp operated on HSE ballast 30.000 lm

Lighting Design Ready Reckoner

www.suntrade.co

m.ua




Thorn Lighting Main OfficesHead OfficeThorn Lighting Holdings Limited, Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.com


Thorn DNT Airfield Lighting Pty Limited, P O Box 548,Unit 2, 7-9 Newcastle Road, Bayswater, Melbourne, Victoria 3153, AustraliaTel: (61) 3 9720 3233Fax: (61) 3 9720 8233E-mail: [email protected]: www.thornairfield.com






Czech RepublicThorn Lighting CS, spol. s.r.o., Na Březince 6/930, 150 00, Praha 5, Czech RepublicTel: (42) 02 2431 5252Fax: (42) 02 3332 6313E-mail: [email protected]: www.thornlight.cz

DenmarkThorn Lighting A/SAlbuen 44, 6000 Kolding, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601Website: www.thornlight.dk

EstoniaThorn Lighting Oy, Eesti Filiaal,Tatari 23/25, EE-10116 Tallin, EstoniaTel: (372) 656 3505Fax: (372) 656 3227E-mail: [email protected]















RussiaThorn Lighting, Novoslobodskaya Str.,21, office 406 Business Center “Novoslobodskaya21”, Moscow 103030, RussiaTel: (7) 095 956 59 39Fax: (7) 095 956 59 40E-mail: [email protected] Website: www.thorn.ru

Thorn Lighting, Representative Office, Europa House,1 Artilleriiskaya, St Petersburg 191104, RussiaTel: (7) 812 118 8112Fax: (7) 812 118 8119E-mail: [email protected]: www.thorn.ru










www.suntrade.co

m.ua

Concavia RangeInnovative and robust range of high bay luminaires

www.suntrade.co

m.ua

Concavia

www.suntrade.co

m.ua

3

The innovative Concavia high bay luminaire familyensures choice and flexibility, offering three sizesincluding Small, Large and Extra Large, togetherwith a wide range of lamp types and wattagecombinations.

• The option of reflectors and decorativeaccessories allows the Concavia range to beadapted to create lighting solutions for a modernarchitectural appearance.

• A range of wire guards and covers improvesafety and protection, while the option of a ringlouvre provides essential glare control.

• Concavia has a robust construction and ismanufactured using high quality materials.

• Suitable for high ambient temperatures.

• Option of IP23 or IP65 to guarantee functionalityof the product in dusty or wet surroundings,whilst still maintaining safety and durability.

A key element of the range is that Concavia offerstool-free installation and maintenance. For ease ofinstallation the product is equipped with a mainsentry cable, therefore no access is required into themain body of the fitting. This ensures that the IP65rating is maintained, providing a high level ofsafety, and saving time and money.

Concavia offers opportunities to create lightingsolutions for a range of commercial andindustrial applications such as retail, sports halls,factories and warehouses through to toughindustrial environments.

For more information on applications please referto page 5.

www.suntrade.co

m.ua

4

The main design focus for theConcavia family has beenfunctionality, combined with aunique aesthetical appearance,outstanding performance, andexceptional technical aspects

www.suntrade.co

m.ua

5

Applications

Decorative• Retail & shops• Malls• Showrooms• Exhibition and event halls• Airport atriums• Railway stations

Industry• Factory and production areas• Heavy industry• Foundries• Warehouses• Dockyards• Power stations

Sports• Indoor sports facilities• Skating rinks• Recreational centres

Design, aesthetics and a choiceof lamps are a key consideration,where there is a need to create a modern touch, whilst stillmaintaining a relaxed environment.

When creating a particularambience in a showroom or aretail application, Concavia Sand L offers a unique appearancewithout compromising quality,safety or reliability.

There are several critical factorswhich need to be taken intoaccount to ensure a smooth andcontinous operation withinindustrial applications. Theseinclude high quality materials,IP ratings, enhanced performanceto limit maintenance requirementsand suitability for environmentswith higher ambient temperatures.

Concavia L and XL are an idealchoice for these types ofapplication, they are easy toinstall, provide excellent LOR andoffer IP23 or IP65 for tougherindustrial surroundings.

For most sporting applicationsfunctionality and productperformance are essential.Glare control and IP ratings needto ensure optimal performanceeven at low temperatures, suchas skating rinks.

Concavia L or XL are wellequipped to provide the perfectsolution for these applications.

The standard ambienttemperature for testing luminairesaccording to EN 60598 is 25°C,and that is what most competitors’products achieve. However, veryoften, especially in industrialapplications, the ambienttemperature where high bayfittings are installed is much higher.

‘Thorn has set its own standard’to suit more realistic conditions.All Concavia S and L versionswith aluminium reflectors havebeen tested at an ambienttemperature of 35°C. Naturallythere are versions which can beused in even higher ambienttemperatures but as long as the

temperature does not exceed35°C, users do not have toconsider which is the correctluminaire to use. For thoseversions which can operate inhigher ambient temperatures,these have been highlighted inthe ordering guides.

Setting the Standard @ 35°C

www.suntrade.co

m.ua

6

Key Features and Benefits

The Concavia family has beendesigned with functionality, safetyand overall product performancein mind, offering many uniquefeatures and benefits

Ambient Temperature

• Core Concavia range has been tested to anambient temperature of 35°C, with severaldedicated versions operating at higher ambienttemperatures, for further information see page 13

• Guaranteed ‘start-up’ at temperatures down to -30°C

• Aluminium housing with cooling-fins improvesheat flow

Safety

• Timed ignitors prevent defective lamps from flashing• High safety level achieved through the use of timed ignitors• Thermally protected ballasts eliminate the risk of over heating• High IP rating ensures long maintenance cycles• Limited surface temperatures • Auxiliary lamp options - if the power source is cut, once power is

restored to the luminaire it immediately provides minimum lux level

Consistent tool-free installation and assembly

• Option of quick fix brackets for any suspension method• Quick fix bracket simply clips on the main housing, there

is no need for any tools• Reflector design with unique locking device• No tools required to make electrical connection to

luminaire, due to pre-installed 1.5m mains entrycable (LSOH)

• Tool-free installation. Easy to install wire guard andglass cover accessories.

6

www.suntrade.co

m.ua

7

Innovation

• IP65 versions equipped with a GORETM membrane vent• Allows air pressure equalisation, preventing the ingress

of air and moisture around seals, thus protecting electronic components

• Moisture vapour permeable to help aid reduction in condensation• Assists in maintaining performances levels

Lamps and gear

• Wide range of lamps including innovative lamp solutions, such asQL lamps and 1000W lamps

• QL lamps provide extensive lamp life• ‘Fit and forget’ concept – minimum operating lifetime of 60,000 hours• Ideal for applications where maintenance is difficult or costly

e.g. where access is restricted• 1000W lamps allow less luminaires to be used in very high

mounting applications or where uniformity is less important• Possible to run metal halide lamps with sodium gear which

means higher lumen output

For more information on lamp and gear combinations please refer to page 15

7

Material and design

• Innovative and striking aesthetical appearance to suit design sensitive applications

• Choice of three sizes to suit a variety of applications• Use of high quality aluminium materials • Robust, thermally optimised contruction• Range of aesthetical reflectors and accessories

for creating the perfect lighting solution

www.suntrade.co

m.ua

8

Concavia S

A range of versatile and compactreflector fittings offering highperformance and uniqueaesthetical appearance for use inmany commercial applications

• Suitable for a wide range oflamp types and wattages

• Option of aluminium, plasticand glass reflectors offeringdirect/indirect distribution,each with individualaesthetical appearance

• Puristic and innovative designsuits modern building architecture

• High quality cast aluminiumhousing ensures functionalityand durability


• Pre-installed with1.5m(3 x 1mm2) mains cable foreasy electrical connectionand installation

Lamps42-57W TC-TEL (FSM)

Compact Fluorescent Cap: GX24q85W LMG-lhf (FSI)

Induction lamp60-250W QT (HSG)

Halogen Lamp Cap: E2760-200W A (IA)

Incandescent Cap: E2770-150W HIE (ME) Metal

Halide Lamp Cap: E2770W HIPAR (MR) Metal

Halide Lamp Cap: E2770-150W HIT (MT) Metal

Halide Lamp Cap: G12

Materials/FinishGearbox: extruded and die castaluminium, silver anodisedpainted finishReflectors: high-puritysandblasted aluminium,prismatic polycarbonate,acrylic or glass Reflector covers: prismaticor toughened glassSuspension brackets: stainless steel

Installation/MountingSuitable for single pointsuspension on wire, chain,catenary suspension or twin-wireunit including ceiling rose. Allluminaires are supplied with apre-installed 1.5m (3 x 1mm2) greyLSOH cable for easy tool-freeinstallation. Cover needed for allunprotected HIE and HIT lamps.

StandardsDesigned and manufactured tocomply with EN 60598

Class I Electrical2 Nm (wire guard)6 Nm (glass cover)

IP23 1

1In preparation

SpecificationTo specify state:High bay reflector luminaire for42-57W TC-TEL compactfluorescent, 85W LMG-lhfinduction, 60-250W QThalogen, 60-200W (IA)incandescent, 70-150W HIEmetal halide, 70W HIPAR metalhalide, 70-150W HIT metalhalide lamps with tool-freeinstallation, pre-installed 1.5m(3 x 1mm2) LSOH mains cable,IP23 aluminium housing in silver,anodised finish, sandblastedaluminium, prismaticpolycarbonate, acrylic or glassreflector, stainless steel suspensionbrackets, tested at an ambienttemperature of 35°C. As Thorn Concavia S

• A range of suspensionoptions to suitvarious applications

• Glass covers andwire guards availablefor improved safetyand protection


www.suntrade.co

m.ua

9

Concavia L

A durable high bay luminaireoffering performance, high-techappearance and flexibility tosuit most industrial and largecommercial applications

• Suitable for a wide selectionof lamp types and wattagesup to 400W

• Auxiliary lamp option

• A high safety level is achievedthrough timed ignitors andthermally protected gear

• Choice of IP23 or IP65protection ensure safetyand performance in dustyor wet environments

• A combination of high qualitymaterials and a robustconstruction ensure highperformance in environmentswith high ambient temperaturesand tough surrounds


SpecificationTo specify state:High bay reflector luminaire forHIE/HSE and HME 250/400W(with timed ignitors and thermallyprotected gear) or LMG-LHF165W lamps, with tool-freeinstallation, pre-installed 1.5m(3 x 1mm2) LSOH mains cable,aluminium housing IP23 withsilver and natural finish,IP65 with silver and anodisedfinish, venting membrane,sandblasted aluminium,prismatic polycarbonate, acrylicor glass reflector, stainless steelsuspension brackets, tested at anambient temperature of 35°C.As Thorn Concavia L


• Pre-installed with1.5m (3 x1mm2)mains cable for easy electricalconnection and installation

• Puristic and high techaesthetics to suit designsensitive applications

• A range of suspension optionsto suit various applications

• A wide range of aestheticalreflectors providingdirect/indirect distribution



Installation/MountingSuitable for single pointsuspension on wire, chain,catenary suspension or twin-wireunit. All luminaires are suppliedwith a pre-installed 1.5m(3 x 1mm2) grey LSOH cable foreasy and tool-free installation.Cover needed for all unprotectedHIE lamps or IP65 versions.StandardsDesigned and manufactured tocomply with EN 60598

Class I ElectricalSupply voltage:220 – 240 Volts, 50-60Hz.Tapped ballasts to support marketsoutside the harmonised 230V (EU)2 Nm (wire guard)6 Nm (glass cover)

IP23 IP65 1

1In preparation

Lamps165W LMG – lhf (FSI)

Induction Lamp250 – 400W HIE (ME)

Metal Halide Lamp Cap: E40250 – 400W HSE (SE) High

Pressure Sodium Lamp Cap: E40250 – 400W HME (QE) High


Materials/FinishGearbox: extruded and die castaluminium, silver, natural finishfor IP23 and silver, anodisedfinish for IP65Reflectors: high-puritysandblasted aluminium, prismaticpolycarbonate, acrylic or glassReflector covers: prismatic ortoughened glassSuspension brackets: stainless steel

www.suntrade.co

m.ua

10

Concavia XL

A robust and durable high bayluminaire with exceptionallyhigh wattages for specialistindustrial and very highmounting applications

• Specifically designed for usewith 1000W lamps, reducingthe number of luminairesneeded in very high mountingapplications or whereuniformity is less important

• A combination of high qualitymaterials and a robustconstruction ensures highperformance in environmentswith higher ambient temperaturesand tough surrounds

• IP65 protection ensuring safetyand performance in wet anddusty environments




• Glass cover available forimproved safety and protection

• A range of suspension optionsto suit various application

• Pre-installed with 1.5m(3 x 1mm2) mains cable foreasy electrical connectionand installation

Lamps1000W HIE (ME) Metal

Halide Lamp Cap: E401000W HSE (SE) High

Pressure Sodium Lamp Cap: E401000W HME (QE) High


Materials/FinishGearbox: extruded and die castaluminium, silver, anodised finishReflectors: high-puritysandblasted aluminiumReflector covers: toughened glassSuspension brackets: stainless steel

Installation/MountingSuitable for single pointsuspension on wire, chain, ortwin-wire unit. All luminaires aresupplied with a pre-installed1.5m(3 x 1mm2) grey LSOH cable foreasy and tool-free installation.Cover needed for all unprotectedHIE lamps or IP65.

Standards Designed and manufactured tocomply with EN 60598

Class I ElectricalSupply voltage:220 – 240 Volts, 50-60Hz.Tapped ballasts to supportmarkets outside the harmonised230V (EU) 6 Nm (glass cover)

IP65 1

1In preparation

SpecificationTo specify state:High bay reflector luminaire forHIE/HSE and HME 1000Wlamps (with timed ignitors andthermally protected gear) withtool-free installation, pre-installedwith1.5m (3 x 1mm2) LSOH mainscable, IP65 with silver andanodised finish, ventingmembrane, sandblastedaluminium reflector and stainlesssteel suspension brackets. As Thorn Concavia XL

www.suntrade.co

m.ua

11

125

261

Ø320

217


Aluminium reflector Prismatic refractor and prismatic cover

Deco KIT with glass refractorGlass refractor


HousingCONCAVIA S 1X60-250W QT/A E27 NL HSG E27 1.7 96218692CONCAVIA S 1X42W TC-TEL HF LI840 FSM GX24Q 1.9 96218687CONCAVIA S 1X42W TC-TEL HFD LI840 FSM GX24Q 2.0 96218688CONCAVIA S 1X57W TC-TEL HF LI840 FSM GX24Q 1.9 96218689CONCAVIA S 1X57W TC-TEL HFD LI840 FSM GX24Q 2.0 96218690CONCAVIA S 1X85W QL LI FSI 3.0 96218691CONCAVIA S 1X70W HIE/HIPAR LI HIE ME/MR E27 3.8 96218693CONCAVIA S 1X70W HIE/HIPAR LI HIPAR ME/MR E27 3.8 96218694CONCAVIA S 1X150W HIE LI ME/MR E27 4.5 96218695CONCAVIA S 1X70W HIT LI MT G12 3.5 96218696CONCAVIA S 1X70W HIT HF LI MT G12 2.2 96218697CONCAVIA S 1X150W HIT LI MT G12 4.4 96218698CONCAVIA S 1X150W HIT HF LI MT G12 2.7 96218699HF - High frequency, HFD - High frequency dimmable, LI - Lamp included, NL - Lamp not included

Description Wt (Kg) SAP Code

CONCAVIA S RAL ALUMINIUM REFLECTOR 0.5 96218701CONCAVIA S AC RPR DI ACRYLIC PRISMATIC REFRACTOR, 1.0 96218702

DIRECT/INDIRECTCONCAVIA S PC RPR DI POLYCARBONATE PRISMATIC 1.0 96228969

REFRACTOR, DIRECT/INDIRECTCONCAVIA S RGL DI GLASS PRISMATIC REFRACTOR, 4.5 96218704

DIRECT/INDIRECTCONCAVIA S KIT RAL DI ALUMINIUM REFLECTOR INSERT 0.15 96229608

FOR DIRECT/INDIRECT REFLECTORSCONCAVIA KIT DECO DECORATIVE ATTACHMENT 0.7 96218706

(REFLECTOR ARMS)CONCAVIA S KIT COVER GL GLASS COVER, KIT 0.8 96218707CONCAVIA S KIT COVER PR PRISMATIC COVER, KIT 0.35 96218708CONCAVIA S KIT WG WIRE GUARD, KIT 0.10 96218709CONCAVIA S KIT CRL CIRCULAR RING LOUVRE, KIT 0.25 96218710


Concavia S - aluminium reflectorLamp: 1 x 150W HIELOR: 0.80 SHR max: 1.77 LMC: C

Concavia S - aluminium reflectorLamp: 1 x 57W TC-TELLOR: 0.74 SHR max: 1.90 LMC: C

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Attachments

Concavia S


CONCAVIA S

Accessories

Housing

Reflectors

Attachments

RAL

KIT COVERGL*

KIT COVERPR*

KIT COVERPR*

KIT WG KIT CRL

AC RPR DI PC RPR DI RGL DIKIT

DECO


Mandatory Optional

KITDECO

KIT RALDI

KIT RALDI

KIT RALDI

Housing Concavia S RAL

www.suntrade.co

m.ua

12



IP23 Housing with Auxiliary LampCONCAVIA L 1X250W HIE AUX IP23 LI ME E40 7.9 96218713CONCAVIA L 1X250W HSE AUX IP23 LI HSE SE E40 7.9 96218718CONCAVIA L 1X250W HSE AUX IP23 LI HIE SE E40 7.9 96218719CONCAVIA L 1X250W HME AUX IP23 LI QE E40 7.9 96218725CONCAVIA L 1X400W HIE AUX IP23 LI ME E40 9.3 96218715CONCAVIA L 1X400W HSE AUX IP23 LI HSE SE E40 9.3 96218722CONCAVIA L 1X400W HSE AUX IP23 LI HIE SE E40 9.3 96218723CONCAVIA L 1X400W HME AUX IP23 LI QE E40 9.3 96218727


IP65 Housing with Auxiliary LampCONCAVIA L 1X250W HIE AUX IP65 LI ME E40 7.9 96218732CONCAVIA L 1X250W HSE AUX IP65 LI HSE SE E40 7.9 96218737CONCAVIA L 1X250W HSE AUX IP65 LI HIE SE E40 7.9 96218738CONCAVIA L 1X250W HME AUX IP65 LI QE E40 7.9 96218744CONCAVIA L 1X400W HIE AUX IP65 LI ME E40 9.3 96218734CONCAVIA L 1X400W HIE/HSE AUX IP65 LI HIE SE E40 9.3 96218742CONCAVIA L 1X400W HSE AUX IP65 LI HSE SE E40 9.3 96218741CONCAVIA L 1X400W HME AUX IP65 LI QE E40 9.3 96218746LI - Lamp included



Wide reflector

Narrow reflector with glass cover

Prismatic refractor

Glass refractor

Prismatic refractor with prismatic cover

Narrow reflector

Wide reflector with glass cover


CONCAVIA L RAL WD ALUMINIUM REFLECTOR, WIDE DISTRIBUTION 1.0 96218749CONCAVIA L RAL NW ALUMINIUM REFLECTOR, NARROW DISTRIBUTION 1.0 96218750CONCAVIA L AC RPR DI ACRYLIC PRISMATIC REFRACTOR, DIRECT/INDIRECT 3.0 96218751CONCAVIA L PC RPR DI POLYCARBONATE PRISMATIC REFRACTOR, DIRECT/INDIRECT 3.0 96228968CONCAVIA L RGL DI GLASS PRISMATIC REFRACTOR, DIRECT/INDIRECT 9.5 96218752CONCAVIA L KIT COVER GL IP65 GLASS COVER IP65, KIT 2.5 96218754CONCAVIA L KIT COVER PR PRISMATIC COVER, KIT 1.0 96218755CONCAVIA L KIT WG WIRE GUARD, KIT 0.15 96218756CONCAVIA L KIT CRL CIRCULAR RING LOUVRE , KIT 0.35 96218757

374

163

Ø503

359

Ø503

359

Concavia L

Attachments

Housing Concavia L RAL WD Concavia L RAL NW

www.suntrade.co

m.ua


CONCAVIA L IP23

Accessories

Housing

Reflectors

Attachments

RAL WD

KIT COVERGL IP65*

KIT COVERPR*

KIT WG KIT CRL

RAL NW PC RPR DI RGL DI

IP23

AC RPR DI


Mandatory Optional

13

Concavia L - IP23 wide reflectorLamp: 1 x 400W HSELOR: 0.88 SHR max: 2.11 LMC: C

Concavia L - IP23 narrow reflectorLamp: 1 x 400W HSELOR: 0.85 SHR max: 1.26 LMC: C

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Although the Concavia range has been tested at an ambienttemperature of 35°C, there are some exceptions. Versions withQL Induction lamps can only be operated at 25°C, but pleasefind in the table below the versions which can be used forhigher ambient temperatures:

Description *Max. Ambient Temperature °CIP23CONCAVIA L 1x250W HIE IP23 LI 50CONCAVIA L 1x250W HIE/HSE IP23 LI HSE 55CONCAVIA L 1x250W HIE/HSE IP23 LI HIE 50CONCAVIA L 1x250W HME IP23 LI 45CONCAVIA L 1x400W HME IP23 LI 40IP65CONCAVIA L 1x250W HIE IP65 LI 50CONCAVIA L 1x250W HIE/HSE IP65 LI HSE 50CONCAVIA L 1x250W HIE/HSE IP65 LI HIE 50CONCAVIA L 1x250W HME IP65 LI 45*to reach the stated ambient temperatures please ensure that the ballast tapping is set in linewith the supply voltage

Ambient temperatures


IP65

CONCAVIA L IP65

RAL WD

KIT COVERGL IP65

KIT WG KIT CRL

RAL NW

www.suntrade.co

m.ua

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

180

120

60 60°

30°30°

60°

0°

90°90° cd/1000klm

Concaviasuspension

kit

CONCAVIA XL IP65

RAL

KIT COVERGL*

Accessories

Housing

Reflectors

Attachments

*Only needed for IP65 or HIE(lamp requirement)

14

Accessoriesfor S, L & XL

Description SAP Code

CONCAVIA KIT FIX/CH FIXING CLIP AND HOOK FOR CHAIN SUSPENSION 96218763CONCAVIA KIT MSW1 2M SINGLE WIRE SUSPENSION KIT, 2M LONG 96218764CONCAVIA KIT MSW1 4M SINGLE WIRE SUSPENSION KIT, 4M LONG 96218765CONCAVIA KIT MSW2 2M TWIN WIRE SUSPENSION KIT, 2M LONG 96218766CONCAVIA KIT MSW2 4M TWIN WIRE SUSPENSION KIT, 4M LONG 96218767CONCAVIA KIT FIX MCA* FIXING CLIP AND HOOK BRACKET FOR CATENARY SUSPENSION KIT 96218768CONCAVIA KIT FIX/AV ANTI VIBRATION FIXING KIT 96218770CONCAVIA KIT FIX/SUP SUPPLEMENTARY SUSPENSION KIT 96218771*Not suitable for Concavia XL

Chain suspension Catenery suspension kit Single wire suspension


Housing IP65CONCAVIA XL 1X1000W HIE IP65 LI ME E40 15.0 96218758CONCAVIA XL 1X1000W HSE IP65 LI SE E40 15.0 96218759CONCAVIA XL 1X1000W HME IP65 LI QE E40 15.0 96218760LI - Lamp included



Concavia XLDescription Wt (Kg) SAP Code

AttachmentsCONCAVIA XL RAL ALUMINIUM REFLECTOR 1.5 96218761CONCAVIA XL KIT COVER GL IP65 GLASS COVER IP65, KIT 3.3 96218762

504

163

Ø574

481

Concavia XL - open reflectorLamp: 1 x 1000W HSELOR: 0.78 SHR max: 1.49 LMC: E

Concavia XL - reflector fitted with glassLamp: 1 x 1000W HIELOR: 0.69 SHR max: 1.61 LMC: E

Concavia XL

Attachments

The suspension brackets have tobe ordered separately forindividual fittings. This providesflexibility and allows a choice ofsuspension options for aestheticalor functional applications.

www.suntrade.co

m.ua

0

2

4

6

8

10

12

14

16

18

200 300 400 500 600 700 800 900 1000

Num

ber o

f lum

inai

res

1000W HSE - 300 lux

1000W HSE - 500 lux

1000W HIE - 300 lux

1000W HIE - 500 lux

1000W HME - 300 lux

1000W HM - 500 lux

Concavia XL

with reflector RAL


Floor area m2

16

14

12

10

8

6

4

2

0100 150 200 250 300 350 400 450 500

Num

ber o

f lum

inai

res

Floor area m2





400W HIE - 300 lux

400W HIE - 500 lux

400W HME - 300 lux

400W HME - 500 lux

Concavia L



0

5

10

15

20

25

30

35

40

45

10 20 40 60 80 100 120 140 160 180 200

Num

ber o

f lum

inai

res

Floor area m2



150W HIE - 500 lux

150W HIE - 300 lux

Concavia S

with reflector RAL


Planning and lamp info

Lamps and Operation

0

2

4

6

8

10

12

14

16

18

200 300 400 500 600 700 800 900 1000

Num

ber o

f lum

inai

res

1000W HSE - 300 lux

1000W HSE - 500 lux

1000W HIE - 300 lux

1000W HIE - 500 lux

1000W HME - 300 lux

1000W HM - 500 lux

Concavia XL

with reflector RAL


Floor area m2

16

14

12

10

8

6

4

2

0100 150 200 250 300 350 400 450 500

Num

ber o

f lum

inai

res

Floor area m2





400W HIE - 300 lux

400W HIE - 500 lux

400W HME - 300 lux

400W HME - 500 lux

Concavia L



0

5

10

15

20

25

30

35

40

45

10 20 40 60 80 100 120 140 160 180 200

Num

ber o

f lum

inai

res

Floor area m2



150W HIE - 500 lux

150W HIE - 300 lux

Concavia S

with reflector RAL


The Ready Reckoner provides a very quick and simple guide to know approximately how many fittings will be required to achieve a certain lux level (with a certain lamp eg. 57W TC-TEL - 500 lux).

To read these charts look along the horizontal axis showing the floorarea m2 until you reach the required floor space, then move to thecurved line which refers to the lamp types and lux level. Now lookhorizontally following the line to the left, this will indicate theapproximate number of luminaires required.

For example:

Concavia S

Floor area m2 - 120Lamp type and lux level - 57W TC-TEL - 500 luxApproximate number of luminaires - 28(Please see Concavia S diagram)

The Concavia family offers a wide selection of different lamps.Concavia L and XL mainly focus on HID technology, which meansmetal halide, high pressure sodium and mercury lamps.

To make the right choice in terms of light sources can be easy, whenknowing some simple basics about the different lamps:

• HIE (metal halide) are very efficient, offer very high lumen packagesand good colour rendering. The main applications, from Industry toRetail, are nearly unlimited.

• HSE (high pressure sodium) lamps offer a very long lifetime andexcellent efficiency. However it does not offer the colour renderinglevel of a HIE lamp and are mainly used in Industry.

• HME (high pressure mercury) are mainly used for simple industrial applications.

HID lamps always need gear sets, however HIE (metal halide) lampsshow quite a special functionality – they can be run on HIE or on HSEgear. This may have an impact on colour rendering and colourtemperature, but the main result is a much higher lumen-output ifoperated at HSE gear, as shown in the table below with a 400W HIElamp (reference: OSRAM HQI-E 400/D)

Concavia Lamp and ballast Luminous flux

1/400W HIE LI HIE lamp operated on HIE ballast 26.000 lm1/400W HIE/HSE LI HIE HIE lamp operated on HSE ballast 30.000 lm

Lighting Design Ready Reckoner

www.suntrade.co

m.ua




Thorn Lighting Main OfficesHead OfficeThorn Lighting Holdings Limited, Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.com


Thorn DNT Airfield Lighting Pty Limited, P O Box 548,Unit 2, 7-9 Newcastle Road, Bayswater, Melbourne, Victoria 3153, AustraliaTel: (61) 3 9720 3233Fax: (61) 3 9720 8233E-mail: [email protected]: www.thornairfield.com






Czech RepublicThorn Lighting CS, spol. s.r.o., Na Březince 6/930, 150 00, Praha 5, Czech RepublicTel: (42) 02 2431 5252Fax: (42) 02 3332 6313E-mail: [email protected]: www.thornlight.cz


EstoniaThorn Lighting Oy, Eesti Filiaal,Tatari 23/25, EE-10116 Tallin, EstoniaTel: (372) 656 3505Fax: (372) 656 3227E-mail: [email protected]















RussiaThorn Lighting, Novoslobodskaya Str.,21, office 406 Business Center “Novoslobodskaya21”, Moscow 103030, RussiaTel: (7) 095 956 59 39Fax: (7) 095 956 59 40E-mail: [email protected] Website: www.thorn.ru











www.suntrade.co

m.ua

CruzStylish, versatile downlight range with excellent lighting technique and simple, high-speed installation

www.suntrade.co

m.ua

www.suntrade.co

m.ua

3

Simple design, superior performance

Unobtrusive design, excellent lighting technique, easy installation and versatility are the keys to success in many downlight applications

Thorn embodies all these attributes with the new Cruz range of high quality downlights.

With its new generation of reflectors and choice of three major lamp types, from 10W CFL to 150W HIT, Cruz gives class leading light output ratios with excellent glare control.

Installation is made quick and easy by a patented ‘sec-lock’ (Secure, easy and comfortable) spring-loaded holding arm, which automatically retains the downlight – tool-free – in place. Fixing is further aided by the availability of low height units for 100mm void depths and ‘plug and play’ versions.

Designed for use in modern interiors, each downlight matches its counterpart in looks and there is a choice of three different bezels – white, chrome or grey finish. Seventeen sophisticated attachments and colour filters change or control Cruz’s light distribution. These vary from the decorative to the functional, from the floating trumpet attachment to the IP54 cover. Furthermore, specific attachments provide a visual link with other Thorn product ranges, such as Planor, Garbo and Line XS.

High frequency control gear and digital dimming options, including DALI, are available, as are emergency versions.

A complementary Gyro version completes the offer. Directional effects (0-60°) can be obtained by altering the amount of protrusion from the ceiling.

www.suntrade.co

m.ua

WallwasherCruz 240 – page 10

HorizontalCruz 240 Low/High – page 10

4

Cruz is the complete, comprehensive downlight range to meet every application and performance requirement

• Technical innovations such as its patented sec-lock installation method make Cruz quick and easy to install

• Cruz can be configured for any requirement. The system offers very high light output ratios with excellent light control, in wattages ranging from 10W compact fluorescent (CFL) to 150W discharge. Amalgam lamps are recommended for all TC-TEL-I versions. Available in 10 sizes with a wide range of attachments, Cruz is suitable for most applications

• High quality construction in die-cast aluminium

• Polycarbonate components are produced with recycled material

• High grade anodised aluminium reflectors provide LORs greater than 80% in some wattages

• All strain carrying parts are constructed from metal to maximise quality and durability

• Dedicated range of attachments in Functional, Family or Decorative designs

Introduction to the range

HorizontalCruz 205 Low/High – page 10

205 240 240TC-D/TC-DEL HIT TC-D/TC-DEL HIT TC-D/TC-DEL HIT

TC-T/TC-TEL HST TC-T/TC-TEL HST TC-TEL HST

www.suntrade.co

m.ua

GyroCruz 160/210 – page 14

VerticalCruz 115/160 – page 12

HorizontalCruz 280 High – page 10

• Lamps and reflector can be assembled before the luminaire is secured in place from the outside. Thorn’s patented sec-lock system makes installation quick and easy.

• Cruz packs available which have pre-installed lamps and cable

• True low height versions (Type L) for installations in 100mm void depths

• ‘Plug and play’ Wieland fast connector versions available

• Versions available with digital dimming and DALI

• With high wattage versions and excellent light control, Cruz offers a real alternative to ordinary recessed linear designs.(Less than 1000cd/m in 65° without attachments in most type H, high reflector versions (EN12464)

• Attachments with bayonet fitting are easy to install

• Most versions and wattages are available with ordinary 3 hour emergency light, SelfTest or Addressable Test

280 115/160 160/210

5

TC-D/TC-DEL HIT TC-DEL HIT HIT

TC-TEL HST TC-TEL HST

www.suntrade.co

m.ua


• Optimised high grade aluminium reflectors produce controlled light with class leading light output ratios, for efficient glare-free illumination

• Radial light distribution for good modelling and patterns, 65% cut-off

Efficiency: Conserving energy and effort, reducing CO2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain.

• Choice of high efficacy lamp types

• High frequency electronic and dimmable circuits provide efficient operation and controlled energy use

• Aluminium construction provides recyclable components

• Patented installation method gives fast, tool-free, safe and reliable mounting and maintenance


• Aesthetic design of visible attachments provides stimulating appearance and lighting effects

• Elegant style, comprehensive attachments and co-ordinated sizes maintain good architectural integration and flexibility

• Emergency versions ensure a feeling of safety

The programme is based on the principle that Performance, Efficiency and Comfort determine the effectiveness of lighting, its impact on the people using it, and its impact on the natural environment. Cruz delivers the right light in the right place at the right time.

Cruz evokes the spirit of Thorn’s dynamic, results-orientated PEC programme


www.suntrade.co

m.ua

7

Compact fluorescent lamps with amalgam technology (TC-TEL-I types) offer flexibility in luminaire design and acceptable environmental conditions. The lamps use an alloy of mercury instead of pure mercury. The amalgam enables a relatively constant mercury vapour pressure over a wide temperature range and thus maximum light output. TC-TEL-I amalgam lamps emit 90% or more lumens in +10°C to +70°C ambient temperatures (conventional compact fluorescents only emit 90% or more lumens in +20°C to +45°C ambient temperatures).

Consequently the Cruz range has been optimised for single lamp TC-TEL-I wattages. This enables improved scheme performance, especially when compared with downlights employing twin TC-DEL lamps. The tables below show how a higher lux level can be achieved with a lower power consumption!

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

263 181 319 0.69 0.57

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

216 111 280 0.51

Emin

/Emax

0.39

CRUZ 200L 2x18W TC-DEL HF

CRUZ 240H 2x26W TC-DEL HF

<22 (2x18 200L)

<19 (2x26 240H)

12m

12m0m

0m

lx

350

300 Room Height: 2,7m

Reflection factors: Ceiling: 70% Walls: 50% Floor: 20%

Maintenance factor: 0,67 Height of workingplane: 0,8m

250

200

150

Power consumption: 6.25 W/m² = 2.71 W/m²/100 lx




326 232 377 0.71 0.62

234 99 291 0.42 0.34

CRUZ 200L 1x32W TC-TEL-I

CRUZ 240H 1x42W TC-TEL-I

<22 (1x32 200L)

<19 (1x42 240H)

UGRYta

UGR

UGR

UGR

Example of general area

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

Lighting schemes

High efficiency and excellent glare control

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

263 181 319 0.69 0.57

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

216 111 280 0.51

Emin

/Emax

0.39



<22 (2x18 200L)

<19 (2x26 240H)

12m

12m0m

0m

lx

350




250

200

150





326 232 377 0.71 0.62

234 99 291 0.42 0.34



<22 (1x32 200L)

<19 (1x42 240H)

UGRYta

UGR

UGR

UGR


Working plane

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

263 181 319 0.69 0.57

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

216 111 280 0.51

Emin

/Emax

0.39



<22 (2x18 200L)

<19 (2x26 240H)

12m

12m0m

0m

lx

350




250

200

150





326 232 377 0.71 0.62

234 99 291 0.42 0.34



<22 (1x32 200L)

<19 (1x42 240H)

UGRYta

UGR

UGR

UGR


Working plane

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

263 181 319 0.69 0.57

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

216 111 280 0.51

Emin

/Emax

0.39



<22 (2x18 200L)

<19 (2x26 240H)

12m

12m0m

0m

lx

350




250

200

150





326 232 377 0.71 0.62

234 99 291 0.42 0.34



<22 (1x32 200L)

<19 (1x42 240H)

UGRYta

UGR

UGR

UGR


Working plane

Emed

[lx] Emin

[lx] Emax

[lx] Emin

/Emax

Emin

/Emax

Yta

Working plane

Emed

[lx] Emin

[lx] Emax

[lx] U0

Emin

/Emax

Yta

Working plane

• Amalgam lamp use E3/E3TX recommended only for 'escape-route' and 'open-area', not for 'high-risk-task'

• Amalgam-lamp use HFD/HFX recommended only to dim to 30%

www.suntrade.co

m.ua

www.suntrade.co

m.ua

9

Installation

1. Start position (before installation)

2. End position (after installation)

3. Push the luminaire, including the rear tension-spring, into the hole

4. With one hand push the ring of the luminaire into the ceiling (to avoid fingerprints on the reflector)

5. Now the clamping arm automatically moves into position, holding the luminaire firmly in the ceiling. (suitable for ceilings 10-35mm

thickness)

6. Please use the red 'T' attachment for narrow ceiling thicknesses 1-10mm.

Twist-and-lock bayonet fitting of reflector and bezel aids maintenance.

1

3 5

2

4

6

Patented sec-lock (secure, easy and comfortable) ensures quick, tool-free installation.

www.suntrade.co

m.ua

10

Horizontal and true ‘Low height’

Applications: A universal lighting problem solver for offices, entrances, reception areas, corridors, schools and colleges, supermarkets and hypermarkets, hospitals and other public buildings

• True ‘low height’ versions (type L, height 98mm) for 100mm void depth

• Integrated electronic HF gears (HID versions with external magnetic gears)

• Compliance with EN 12464 and LG3/LG7 addendum in most wattages, with luminance limit of 1000 cd/m² at 65° (specular reflector of type H versions) or 200 cd/m² when used with attachments.

• Versions available with digital dimming and DALI (remote gear)

• 3 hour maintained emergency versions, SelfTest and Addressable Test, with remote pack (battery and gears) available

• Wieland ‘plug and play’ options available as standard

• Metal halide and White SON high pressure sodium lamp options available to order

• Discharge versions complete with protective glass

• True asymmetric wallwasher version gives consistent illumination of vertical surfaces

• Dedicated attachments (see matrix pages 24-25)

Materials/Finish Body: sandblasted die-cast aluminiumGear cover: black polycarbonateReflector: high grade anodised aluminiumFixing mechanism: die-cast aluminium, steel, polycarbonateBezel: die-cast aluminium

Installation/MountingTool-free installation.Integrated strain relief. 5 pole (5 x 2 x 2.5mm²) piano key terminal block as standard in fixed output versions (dimming versions with 6 poles).Patented sec-lock clips that lock in place via auto-release mechanism without disassembling the product. (1-35mm thickness)Choice of weight distribution ring (accessory) for soft ceilings, can be installed through the cut out.Attachments easily mounted by tool-free bayonet function.Wieland connectors to order.Separate gearbox for HID, HFD, E3/TX versions with pre-installed cable and connection.

StandardsDesigned and manufactured to comply with EN60598 Emergency versions with EN60598.2.22 Class I ElectricalIP20850°C fire retardantIK03 impact resistant

These members of the Cruz family offer a number of options in low height and horizontal lamp positions

205 L : 20°240 L : 15°

205 H : 30°240 H : 30°

Low version High LOR's, low installation depth High version Excellent glare-free lighting

www.suntrade.co

m.ua

11

Cruz 205 L and H Cruz 240 L, H and WallwasherCruz 280 H

Cruz 205 L and HDownlight for horizontal* and vertical lamp position with a 205mm cut-out for ceiling thickness 1-35mm.*vertical for HIT/HST versions

Lamps 18W TC-D (FSQ) compact fluorescent. Cap: G24d-2 18-26W TC-T (FSM) compact fluorescent. Cap: GX24d-2/3 18-26W TC-DEL (FSQ) compact fluorescent. Cap: G24q-2 18-32W TC-TEL-I (FSM) compact fluorescent. Cap: GX24q-2/3 35-150W HIT (MT) metal halide. Cap: G12 50-100W HST (STH) White SON. Cap: GX12

SpecificationTo specify state:Horizontal/low downlight for 18W TC-D/18-26W TC-T/ 18-26W TC-DEL/18-32W TC-TEL-I compact fluorescent, vertical downlight for 35-150W HIT metal halide and 50-100W white SON lamps. Patented sec-lock clips that lock in place via auto-release mechanism without disassembling the product. 205mm cut-out for ceiling thickness up to 1-35mm. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 205 H and L

For ordering guides and data see pages 16-17.

Cruz 240 L and HDownlight for horizontal* and vertical lamp position with a 240mm cut-out*vertical for HIT/HST versions

Lamps 18-26W TC-D (FSQ) compact fluorescent. Cap: G24d-2/3 26W TC-T (FSM) compact fluorescent. Cap GX24d-3 18-26W TC-DEL (FSQ) compact fluorescent. Cap G24q-2/3 26-42W TC-TEL-I (FSM) compact fluorescent. Cap GX24q-3/4 70-150W HIT (MT) metal halide. Cap: G12 50-100W HST (STH) White SON. Cap: GX12

SpecificationTo specify state:Horizontal/low downlight for 18-26W TC-D/26W TC-T/ 18-26W TC-DEL/26-42W TC-TEL-I compact fluorescent, vertical downlight for 70-150W HIT metal halide and 50-100W white SON lamps. Patented sec-lock clips that lock in place via auto-release mechanism without disassembling the product. 240mm cut-out. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 240 H and L

For ordering guides and data see pages 18-19.

Cruz 240 WallwasherAsymmetric downlight with a 240mm cut-out

• A true asymmetric version with a lamp and reflector tilted 30° to give an optimal, asymmetric wallwasher

Lamps 18-26W TC-D (FSQ) Compact fluorescentCap: G24d-2/3 18-26W TC-DEL (FSQ) Compact fluorescent. Cap: G24q-2/3 32-42W TC-TEL-I (FSM) Compact fluorescent. Cap: GX24q-3/4 35-150W HIT (MT) Metal halide. Cap: G12 50-100W HST (STH) White SON. Cap: GX12

SpecificationTo specify state:Asymmetric recessed downlight for 18-26W TC-D/18-26W TC-DEL/32-42W TC-TEL-I compact fluorescent, 35-150W HIT metal halide and 50-100W white SON lamps. Patented sec-lock clips that lock in place via auto-release mechanism without disassembling the product. 240mm cut-out. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 240 WW

For ordering guides and data see page 19.

Cruz 280 HDownlight for horizontal* and vertical lamp position with a 280mm cut-out*vertical for HIT/HST versions

Lamps 26W TC-D (FSQ) Compact fluorescent. Cap: G24d-3 26W TC-DEL (FSQ) Compact fluorescent. Cap: G24q-3 32-57W TC-TEL-I (FSM) Compact fluorescent. Cap: GX24q-3/4/5 70-150W HIT (MT) Metal halide. Cap: G12 50-100W HST (STH) White SON. Cap: GX12

SpecificationTo specify state:Horizontal recessed downlight for 26W TC-D/26W TC-DEL/ 32-57W TC-TEL-I compact fluorescent, vertical downlight for 70-150W HIT metal halide and 50-100W white SON lamps. Patented sec-lock clips that lock in place via auto-release mechanism without disassembling the product. 280mm cut-out. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 280 H


www.suntrade.co

m.ua

12

Vertical

Cruz vertical products are the most discrete members of the family

Applications: For applications where the small dimensions of the product allow for minimal intrusion into the architecture and where accent lighting of walls is required

• Die-cast aluminium bezel and lampholder with cooling fins

• Remote gear: Electronic HF gears for CFL versions and magnetic gear for HID versions

• Discharge versions complete with protective glass

• 3 hour maintained emergency versions, SelfTest or Addressable Test, with remote pack (battery and gears) available

• Dedicated attachments (see matrix page 24-25)

Materials/Finish Bezel and body cooling fins: die-cast aluminiumReflector: high grade anodised aluminiumFixing mechanism: die-cast aluminium, steel, polycarbonate

Installation/MountingTool-free installation.Integrated strain relief.5 pole (5 x 2 x 2.5mm²) piano key terminal block as standard in fixed output versions. 6 poles in dimming versions. 3,4,5 or 6 pole Wieland system to order. Retained in ceiling by stainless spring clips. (1-35mm thickness)Choice of weight distribution ring (accessory) for soft ceilings, installable through the cut out.Attachments easily mounted by tool-free bayonet function.Wieland connectors available to order.

StandardsDesigned and manufactured to comply with EN60598Emergency versions with EN60598 2.22 Class I ElectricalIP20850°C fire retardantIK03 impact resistant

www.suntrade.co

m.ua

13

Cruz 115 VDownlight for vertical lamp position with a 115mm cut-out.

Lamps 10-13W TC-DEL (FSQ) compact fluorescent. Cap: G24q-1 20-70W HIT (MT) metal halide. Cap: G8.5

SpecificationTo specify state:Vertical recessed downlight for 10-13W TC-DEL compact fluorescent and 20-70W HIT metal halide lamps. 115mm cut-out. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 115 V.


Cruz 160 VDownlight for vertical lampposition with a 160mm cut-out.

• Complies with EN 12464 and LG3/LG7 addendum in most wattages with luminance limit of 1000 cd/m² at 65° (specular reflector) or 200 cd/m² when used with or without attachments

• Digital dimming options with or without DALI

Lamps 18-26W TC-T (FSM) compact fluorescentCap: GX24d-2/3 18-32W TC-TEL-I (FSM) compact fluorescent. Cap: GX24q-2/3

SpecificationTo specify state:Vertical recessed downlight for 18-26W TC-T and 18-32W TC-TEL-I compact fluorescent lamps. 160mm cut-out. For emergency versions please specify E3 or E3TX for maintained SelfTest and Addressable Test.As Thorn Cruz 160 V.


Cruz 115 V and Cruz 160 V

www.suntrade.co

m.ua

14

Cruz Gyro

Stylish pivoting downlight versions

Applications: For applications requiring a deliberate focus of light, flexibility of light direction and the creation of colour effects using filters

• Pivots out up to 60°

• Rotates 0-355°

• Choice of flood (36°) or spot (11°) reflector

• Remote high frequency gears

• Lockable pivot

• Supplied complete with protective glass

• Colour filters as attachments

• Dedicated attachments (see matrix pages 24-25)

Materials/FinishBody: die-cast aluminium painted whiteReflector: high grade anodised aluminiumClips: stainless steel spring-clipBezel: die-cast aluminium, painted white

Installation/MountingTool-free installation.Integrated strain relief.3 pole (3 x 2 x 2.5mm²) piano key terminal block as standard in fixed output versions.Retained in ceiling by stainless spring clips. (1-35mm thickness)Choice of weight distribution ring (accessory) for soft ceilings. Can be installed through the cut-out.Wieland connectors to order.

StandardsDesigned and manufactured to comply with EN60598 Class I ElectricalIP20850°C fire retardantIK03 impact resistant

14

www.suntrade.co

m.ua

15

Cruz 210 GyroPivoting downlight with a 210mm cut-out

Lamps 35-150W HIT (MT) metal halide. Cap: G8.5/G12 50-100W HST (STH) White SON. Cap: GX12

SpecificationTo specify state:Pivoting recessed downlight for 35-150W HIT metal halide and 50-100W white SON lamps. 210mm cut-out.As Thorn Cruz 210 Gyro


Cruz 160 and 210 Gyro

Cruz 160 GyroPivoting downlight with a 160mm cut-out

Lamps 20-70W HIT (MT) metal halide. Cap: G8.5/G12

SpecificationTo specify state:Pivoting recessed downlight for 20-70W HIT metal halide lamps. 160mm cut-out. As Thorn Cruz 160 Gyro


www.suntrade.co

m.ua

16

Cruz 205 L Lamp, bezel and attachments (if required) to be ordered separately (except Pack version). Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

Description Ilcos Code

Socket Weight (Kg)

SAP Code

Switchstart (remote gear)

CRUZ 205 H L 1X18W TC-D FSQ G24d-2 1.6 96106771


CRUZ 205 H L 1X18W TC-T FSMH GX24d-2 1.6 96106775


High Frequency (integral gear)

CRUZ 205 H L 1X18W TC-DEL HF FSQ G24q-2 1.1 96106773




CRUZ 205 H L 1X18W TC-TEL-I HF FSMH GX24q-2 1.1 96106777



High Frequency Dimmable (remote gear)

CRUZ 205 H L 1X18W TC-DEL HFD FSQ G24q-2 1.2 96107025


CRUZ 205 H L 1X26W TC-TEL-I HFD FSMH GX24q-3 1.2 96106888


Emergency (remote gear)

CRUZ 205 H L 2X26W TC-DEL HF E3 FSQ G24q-3 1.8 96107111



CRUZ 205 H L 1X18W TC-TEL-I HF E3 FSMH GX24q-2 1.8 96107104



CRUZ 205 H L 1X18W TC-DEL HF E3TX FSQ G24q-2 2.8 96107153

CRUZ 205 H L 1X18W TC-TEL-I HF E3TX FSMH GX24q-2 2.8 96107154





Cruz 205 L Pack (integral gear)

CRUZ 205 H L 2X18W TC-DEL HF GST3 LI840 FSQ G24q-2 1.3 96106877


CRUZ 205 H L 1X32W TC-TEL-I HF GST3 LI840 FSMH GX24q-3 1.2 96106879


106

372406

101

205Ø224


256

101

205

133

Ø224

114278

53

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 205LLamp: 1x 26W TC-TELI (amalgam)LOR: 0.79 DLOR: 0.79

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 205L Lamp: 1x32W TC-TELI (amalgam)LOR: 0.83 DLOR: 0.83

Cd/1000lm150°

120°

90° 300 200 100 90°

60°60°

30°0°

30°

120°

150°

Cruz 205L Lamp: 2x18W TC-DELLOR: 0.69 DLOR: 0.69

HF

TC-D/TC-T/HFD/E3/E3TX

E3 – 3hr emergencyE3TX – 3hr emergency SelfTest/Addressable Test Amalgam lamp use E3/E3TX recommended only for 'escape-route' and 'open-area', not for 'high-risk-task' Amalgam-lamp use HFD/HFX recommended only to dim to 30%

www.suntrade.co

m.ua

17


Socket Weight (Kg)

SAP Code


CRUZ 205 H 1X18W TC-D FSQ G24d-2 1.8 96106783


CRUZ 205 H 1X18W TC-T FSMH GX24d-2 1.8 96106787


Discharge (remote gear)

CRUZ 205 V 1X35W HIT G12 HF MT/UB G12 1.0 96106792



CRUZ 205 V 1X50W HST GX12 HF STH GX12 0.9 96106795



CRUZ 205 H 1X18W TC-DEL HF FSQ G24q-2 1.2 96106785




CRUZ 205 H 1X18W TC-TEL-I HF FSMH GX24q-2 1.2 96106789

CRUZ 205 H1X26W TC-TEL-I HF FSMH GX24q-3 1.2 96106790



CRUZ 205 H 1X18W TC-DEL HFD FSQ G24q-2 1.3 96107026


CRUZ 205 H 1X26W TC-TEL-I HFD FSMH GX24q-3 1.3 96106891



CRUZ 205 H 2X26W TC-DEL HF E3 FSQ G24q-3 2.0 96107102




CRUZ 205 H 1X18W TC-TEL-I HF E3 FSMH GX24q-2 1.9 96107097



CRUZ 205 H 1X18W TC-DEL HF E3TX FSQ G24q-2 2.9 96107146

CRUZ 205 H 1X18W TC-TEL-I HF E3TX FSQ GX24q-2 2.9 96107147


CRUZ 205 H 1X26W TC-TEL-I HF E3TX FSMH GX24q-3 2.9 96107149




Cruz 205 H Lamp, bezel and attachments (if required) to be ordered separately. Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

158

382

148

205Ø224

266

148

205

133

Ø224

114278

53

205

184

39

89

Ø224

209

205Ø224

209

35

8035/70W - 150150W - 210

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 205H Lamp: 1x32W TC-TELI (amalgam)LOR: 0.83 DLOR: 0.83

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 205H Lamp: 1x26W TC-TELI (amalgam)LOR: 0.81 DLOR: 0.81

HF

TC-D/TC-T/HFD/E3/E3TX HST

HIT

E3 – 3hr emergencyE3TX – 3hr emergency SelfTest/Addressable TestAmalgam lamp use E3/E3TX recommended only for 'escape-route' and 'open-area', not for 'high-risk-task' Amalgam-lamp use HFD/HFX recommended only to dim to 30%

www.suntrade.co

m.ua

18


Socket Weight (Kg)

SAP Code





































Cruz 240 L Pack





Cruz 240 L Lamp, bezel and attachments (if required) to be ordered separately (except Pack version). Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 240L Lamp: 1x32W TC-TELI (amalgam)LOR: 0.79 DLOR: 0.79

Cd/1000lm150°

120°

90° 300 200 100 90°

60°60°

30°0°

30°

120°

150°

Cruz 240L Lamp: 2x 26W TC-DELLOR: 0.63 DLOR: 0.63

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 240L Lamp: 1x 42W TC-TELI (amalgam)LOR: 0.85 DLOR: 0.85

294

101

240

133

Ø264

114278

53

TC-D/TC-T/HFD/E3/E3TX

110

240

404

101

Ø264

HF



www.suntrade.co

m.ua

19


Socket Weight (Kg)

SAP Code










































238

240Ø264

184

39

89

240

238

Ø264

80

35

35/70W - 150150W - 210

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 240H Lamp: 1x 42W TC-TELI (amalgam)LOR: 0.79 DLOR: 0.79

Cd/1000lm150°

120°

90° 300 200 100 90°

60°60°

30°0°

30°

120°

150°

Cruz 240H Lamp: 2x 26W TC-DELLOR: 0.57 DLOR: 0.57

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 240H Lamp: 1x 32W TC-TELI (amalgam)LOR: 0.84 DLOR: 0.84

294

170

240

133

Ø264

184

89

39

294

170

240

133

Ø264

184

89

39

294

170

240

133

Ø264

184

89

39

TC-D/TC-T/HFD E3/E3TX

180

402

170

240Ø264

HF

HST

HIT


240

208

Ø264

114278

53240

208

Ø264

114278

53

www.suntrade.co

m.ua

20


Socket Weight (Kg)

SAP Code

Switchstart (integral gear)

CRUZ 240 WW 2X18W TC-D FSQ G24d-2 2.3 96106864




CRUZ 240 WW 1X35W HIT G12 HF MT/UB G12 1.3 96106872



CRUZ 240 WW 1X50W HST GX12 HF STH GX12 1.3 96106875

CRUZ 240 WW 1X100W HST GX12 HF STH GX12 1.3 96106876


CRUZ 240 WW 2X18W TC-DEL HF FSQ G24q-2 1.3 96106865



CRUZ 240 WW 1X32W TC-TEL-I HF FSMH GX24q-3 1.3 96106870

CRUZ 240 WW 1X42W TC-TEL-I HF FSMH GX24q-3 1.3 96106871


CRUZ 240 WW 2X18W TC-DEL HFD FSQ G24q-2 1.4 96106915

CRUZ 240 WW 2X26W TC-DEL HFD FSQ G24q-3 1.4 96106916

CRUZ 240 WW 1X42W TC-TEL-I HFD FSMH GX24q-4 1.4 96106917


CRUZ 240 WW 2X18W TC-DEL HF E3 FSQ G24q-2 2.0 96107133



CRUZ 240 WW 1X32W TC-TEL-I HF E3 FSMH GX24q-3 2.1 96107131

CRUZ 240 WW 1X42W TC-TEL-I HF E3 FSMH GX24q-4 2.2 96107132

CRUZ 240 WW 1X26W TC-DEL HF E3TX FSQ G24q-3 3.1 96107180

CRUZ 240 WW 1X32W TC-TEL-I HF E3TX FSMH GX24q-3 3.1 96107181

CRUZ 240 WW 1X42W TC-TEL-I HF E3TX FSMH GX24q-4 3.2 96107182



Cruz 240 Wallwasher Lamp, bezel and attachment (if required) to be ordered separately. Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

240

216

Ø264

240

216

Ø264240

208

Ø264

114278

53

114277

Cd/1000lm150°

120°

90° 1800 1200 600 90°

60°60°

30°0°

30°

120°

150°

Cruz 240W Lamp: 1x150W HITLOR: 0.63 DLOR: 0.63

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 240W Lamp: 2x 18W TC-DELLOR: 0.59 DLOR: 0.59

TC-D/TC-DEL

HIT/HST/E3/E3TX HFD



www.suntrade.co

m.ua

21


Socket Weight (Kg)

SAP Code
































280

247

Ø304

184

39

89

280

247

Ø304

80

35

35/70W - 150150W - 210

Cd/1000lm150°

120°

90° 450 300 150 90°

60°60°

30°0°

30°

120°

150°

Cruz 280 Lamp: 1x 57W TC-TELI (amalgam)LOR: 0.77 DLOR: 0.77

280

442

144

Ø304

133

114278

53

TCD/TC-T/HFD/E3/E3TX

153

280

442

144

Ø304

HF

HST

HIT


www.suntrade.co

m.ua

22


Socket Weight (Kg)

SAP Code


CRUZ 115 V 1X10W TC-D FSQ G24d-1 1.2 96106758

CRUZ 115 V 1X13W TC-D FSQ G24d-1 1.2 96106759


CRUZ 115 V 1X20W HIT G8,5 HF MT/UB G8,5 0.9 96106762



High Frequency (remote gear)

CRUZ 115 V 1X10W TC-DEL HF FSQ G24q-1 0.8 96106760

CRUZ 115 V 1X13W TC-DEL HF FSQ G24q-1 0.8 96106761


CRUZ 115 V 1X10W TC-DEL HF E3 FSQ G24q-1 1.5 96107091

CRUZ 115 V 1X13W TC-DEL HF E3 FSQ G24q-1 1.5 96107092

CRUZ 115 V 1X10W TC-DEL HF E3TX FSQ G24q-1 2.5 96107141

CRUZ 115 V 1X13W TC-DEL HF E3TX FSQ G24q-1 2.5 96107142


Socket Weight (Kg)

SAP Code


CRUZ 160 V 1X18W TC-T FSMH GX24d-2 1.3 96106766

CRUZ 160 V 1X26W TC-T FSMH GX24d-2 1.7 96106767

High Frequency (remote gear)

CRUZ 160 V 1X18W TC-TEL-I HF FSMH GX24q-2 0.9 96106768




CRUZ 160 V 1X26W TC-TEL-I HFD FSMH GX24q-3 0.9 96106885

CRUZ 160 V 1X32W TC-TEL-I HFD FSMH GX24q-3 0.9 96106886


CRUZ 160 V 1X18W TC-TEL-I HF E3 FSMH GX24q-2 1.6 96107093



CRUZ 160 V 1X18W TC-TEL-I HF E3TX FSMH GX24q-2 2.6 96107143



Cruz 160 V Lamp, bezel and attachment (if required) to be ordered separately. Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

151

115Ø133

35/70W - 15020W - 156

35/70W - 8020W - 88

35/70W - 3520W - 39

174

Ø133

114278

53

Cd/1000lm150°

120°

90° 750 500 250 90°

60°60°

30°0°

30°

120°

150°

Cruz 115V Lamp: 1x 35W HITLOR: 0.71 DLOR: 0.71

178

230

114278

53

Cd/1000lm150°

120°

90° 300 200 100 90°

60°60°

30°0°

30°

120°

150°

Cruz 160V Lamp: 1x 26W TC-TLOR: 0.53 DLOR: 0.53

HIT

TC-D/TC-DEL/E3/E3TX

Cruz 115 V Lamp, bezel and attachment (if required) to be ordered separately. Note: TC-TEL products are for use with Amalgam lamps (type TEL-I)

E3 – 3hr emergency, E3TX – 3hr emergency SelfTest/Addressable TestAmalgam lamp use E3/E3TX recommended only for 'escape-route' and 'open-area', not for 'high-risk-task' Amalgam-lamp use HFD/HFX recommended only to dim to 30%

E3 – 3hr emergency, E3TX – 3hr emergency SelfTest/Addressable Test


www.suntrade.co

m.ua

23

100 212 50

37

Ø160Ø177

50

0

50

53

71 100

150

60˚


Socket Weight (Kg)

SAP Code

Flood beam

CRUZ 210 G 1X35W HIT G12 FL MT/UB G12 1.9 96106855



CRUZ 210 G 1X50W HST GX12FL STH GX12 1.8 96106861

CRUZ 210 G 1X100W HST GX12FL STH GX12 1.8 96106863

Spot beam

CRUZ 210 G 1X35W HIT G12 SP MT/UB G12 1.9 96106854



CRUZ 210 G 1X50W HST GX12 SP STH GX12 1.8 96106860

CRUZ 210 G 1X100W HST GX12 SP STH GX12 1.8 96106862

Cruz 160 Gyro Lamp to be ordered separately

Cruz 210 Gyro Lamp and attachment (if required) to be ordered separately

50 50

150

53

60˚

50 50

Ø160

Ø177

100 50

Ø210Ø227

50

0

50

1-253

100

195

60˚

Cd/1000lm150°

120°

90° 1800 1200 600 90°

60°60°

30°0°

30°

120°

150°

Cruz 210G Lamp: 1x 70W HITLOR: 0.82 DLOR: 0.82

Cd/1000lm150°

120°

90° 1200 800 400 90°

60°60°

30°0°

30°

120°

150°

Cruz 210G Lamp: 1x 70W HITLOR: 0.85 DLOR: 0.85

50 50

150

53

60˚

50 50

Ø160

Ø177

20W HIT

20W HIT (view back) 35-70W HIT (view back)35-70W HIT

HIT/HST (view back)

HIT/HST


Socket Weight (Kg)

SAP Code

Flood beam

CRUZ 160 G 1X20W HIT G8,5 FL MT/UB G8,5 1.2 96107039



Spot beam

CRUZ 160 G 1X20W HIT G8,5 SP MT/UB G8,5 1.2 96106849



www.suntrade.co

m.ua

24

Attachments

Attachments Fixed Out swivel Wall Washer

115* 160* 205L* 205H/V* 240L* 240H/V* 280H/V* 160 210 240

Bezels

Bezel WHI 96106920 96106926 96106934 96106934 96106950 96106950 96106965 96106950

Bezel CHR 96106921 96106927 96106935 96106935 96106951 96106951 96106966 96106951

Bezel GRY 96107040 96107041 96107042 96107042 96107048

96107048 96107053 96107048

Functional

Cross Vane Louvre 96106939 96106939 96106954 96106954

Radial Louvre 96107043 96107043 96107050 96107050 96107054

Dome 96106924 96106932

Glass IP54 CL 96106919 96106925 96106933 96106933 96106949 96106949 96106964 96106949

Wallwasher

96106948

Emergency

Emergency L/R

96107046 96107046 96106962 96106962 96106970

Emergency Down 96107047 96107047 96106963 96106963 96106971

Ordering Guide Bezel must be ordered separately, except Ring Line XS, Glass Ring FR and Glass Halo.

*Valid for all lamp types in this size

www.suntrade.co

m.ua

25

Attachments Fixed Out swivel Wall Washer

115* 160* 205L* 205H/V* 240L* 240H/V* 280H/V* 160 210 240

Family

Glass Planor IP54 FR 96106940 96106940

Ring Garbo 96106946 96106946

Ring Line XS 96106947 96106947 96106961 96106961

Decorative

Glass Halo FR 96106937 96106937 96107049 96107049

Glass Ring FR 96106922 96106928 96106936 96106936 96106952 96106952 96106967

Glass Trumpet FR/CL 96107045 96107045 96107052 96107052

Retail

Cruz 210G Filter Blue 96106981

Cruz 210G Filter Green 96106982

Cruz 210G Filter Red 96106983

Cruz 210G Filter Yellow 96106984

Cruz 210G Filter IR/UVA 96107056

Cruz 115 Weight Distribution Ring 96106985

Cruz 160 Weight Distribution Ring 96106986 96106986

Cruz 205/210 Weight

Distribution Ring96106987 96106987 96106987

Cruz 240 Weight Distribution Ring 96106989 96106989 96106989

Cruz 280 Weight Distribution Ring 96106990

Ordering Guide Bezel must be ordered separately, except Ring Line XS, Glass Ring FR and Glass Halo. Ordering Guide Bezel must be ordered separately, except Ring Line XS, Glass Ring FR and Glass Halo.

*Valid for all lamp types in this size

www.suntrade.co

m.ua

www.suntrade.co

m.ua

www.suntrade.co

m.ua





AustriaThorn Licht GmbH Donau-City-Straße 11, 1220 Wien, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: [email protected]: www.thornlighting.at

ChinaThorn Lighting (Guangzhou) Operations Ltd, No.12 Lian Yun Road, Eastern Section, GETDD, Guangzhou 510530, ChinaTel: (86) 20 3228 2706Fax: (86) 20 3228 1777E-mail: [email protected]



DenmarkThorn Lighting A/SAlbuen 44, 6000 Kolding, DenmarkTel: (45) 7696 3600Fax: (45) 7696 3601E-mail: [email protected]: www.thornlighting.dk


Hong KongThorn Lighting (Hong Kong) LimitedUnit 4301, Level 43, Tower 1, Metroplaza,223 Hing Fong Road, Kwai Chung, N.T., Hong KongTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]

IndiaThorn Lighting India Pvt. LtdRH-2 Nirav CHS, 636A, 90 Ft. D.P. Road,Near Thakur Polytechnic400 101 Mumbai, IndiaTel: (91) 22285 41056Fax: (91) 22285 1120E-mail: [email protected]: www.thornlighting.com



New ZealandThorn Lighting (NZ) Ltd 399 Rosebank Road, Avondale, Auckland 1026 PO Box 71134, Rosebank, Auckland 1348Tel: (64) 9 828 7155Fax: (64) 9 828 7591E-mail: [email protected] Website: www.thornlighting.co.nz



RussiaThorn Lighting Novoslobodskaya Str., 21, office 406 Business Center “Novoslobodskaya 21”, Moscow 127030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 42E-mail: [email protected]: www.thornlighting.ru

Thorn Lighting Main OfficesSingaporeThorn Lighting (Singapore) Pte Ltd5 Kaki Bukit Crescent, 04-02 Koyotech Building, 416238 SingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]

SwedenThorn Lighting ABIndustrigatan, Box 305, SE-261 23 Landskrona, SwedenTel: (46) 418 520 00Fax: (46) 418 265 74E-mail: [email protected]: www.thornlighting.se

United Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office 301, Block E, Airport road, P.O. Box 1200, Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

Thorn Gulf LLC Al Shoala Building, Office 301/2, Block E, Airport road, P.O. Box 22672, Deira, Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838E-mail: [email protected]: www.thornlighting.com

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]


International SalesThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 1915Fax: (44) 20 8732 1911E-mail: [email protected]: www.thornlighting.com


www.suntrade.co

m.ua


D-CO LEDLED lighting for everyday guidance and accent tasks - indoor and outdoor

www.suntrade.co

m.ua

2

D-CO LED

• Majority designed to replace 20W and 35W MR16 halogen fittings, thus reducing running costs

• Mainly Osram LEDs for exact colour rendering and choice of constant colour appearance

• All versions are available complete with light source, pre-wired cable and converter to facilitate easy installation, ordering and customer convenience. What’s more, there are ‘plug and play’ kits in strings of 3, 4, 5 or 6 • Maintenance free with lamp life up to 50,000 hours

• Light level can be regulated with dimmable options

• Cold light, no UV or IR, plus any front glasses remain cool to the touch

• Interior fittings in white or grey (Wall Asymmetric in anodised aluminium)

Competitively priced, the new range gives reliability, efficiency and ease of installation, thus providing a simple and attractive solution to guide, accent and night-light situations.

Here’s the best news ever for contractors and consultants in the display and night lighting business. It’s the new D-CO LED range, a complete matching series of indoor and outdoor luminaires with so many features there’s hardly room to list them all. But, just for a start, look at these big advantages:

www.suntrade.co

m.ua

3W Mini Spotlightp.4

3W Mini Spotlight with flexible armp.4

3 x 3W Downlightp.5

6 x 1.2W Downlightp.5

6 x 1.2W Multi- directional downlight p.6

3 x 1.2W Downlight p.6

1.2W Mini Downlightp.7

Recessed Wall Asymmetricp.7

Mini Recessedp.12

Medium Recessedp.12

Maxi Recessedp.13

Floodp.13

Product overviewIndoor

Outdoor

3

www.suntrade.co

m.ua

3W Mini Spotlight

• Compact spotlight with short arm - fits palm of the hand.

• Precise 20° beam in either warm white (3000K) or cold white (4000K) - great for working or selling by

• Rotates 355° and can be tilted through 80°

• Surface mounts. Comes pre-wired with cable tail for use with remote switchable or dimmable converter

• Available in kit form - 4 spots, individually pre-wired with connector cables and single converter (pre-wired with cable into central connector block)

• Finished Titan grey

Ø50

Ø31

5

26

5

41

32

Ø18

70

13

8

3W Mini Spotlight with flexible arm

• Compact spotlight with flexible arm allowing directional light

• Precise 20° beam in either warm white (3000K) or cold white (4000K)

• Surface mounts. Choice of base: large base houses converter, small base supplied pre-wired with cable tail for use with remote converter


• Ideal bedhead unit for hotel and residential applications. Also suitable for display lighting.

121210

Ø51

235

31 18

841

20

44

6 33

668025

3118

8

41

4326

26

57

225

1 x 3W LED

Class III electrical

700mA, 230V as kit with driver

IP20

1 x 3W LED

Class I electrical


700mA, 230V including driver

IP20

Version with integral gear

4

www.suntrade.co

m.ua

3 x 3W Downlight

6 x 1.2W Downlight

• Round, fixed and adjustable (+/- 20°), recessed downlight

• Comes pre-wired with cable directly into a remote 8W converter. Less gear option, pre-wired with cable tail for use with remote dimmable converter

• Choice of beam angles: 15°, 24° or 35°

• Simple 35W MR16 LV halogen replacement

• Available in warm white (3000K) or cold white (4000K) options

• Choice of white or Titan grey finish

3225

63

90

98

Ø90

• Round, fixed, recessed downlight


• Simple 20W MR16 LV halogen replacement (9W circuit load)

• Wide 60° beam in either warm white (3000K) or cold white (4000K)


• No glare/spill light

60

7780

36

Ø76Ø96

Ø72

Ø57Ø80

3 x 3W LED

Class II electrical (for 230V version)

Class III electrical (for 700mA version)


IP20

6 x 1.2W LED




IP20

5

www.suntrade.co

m.ua

6 x 1.2W Multi-directional downlight

• Round, gyro adjustable (40° tilt and 355° rotation), recessed downlight.





Ø120

105

363

56

12

Ø105

• Round, fixed and adjustable (+/- 20°), recessed downlight.

• Comes pre-wired with cable for use with remote switchable or dimmable converter

• Available in kit form - 3 downlights, individually pre-wired with connector cables and single converter (pre-wired with cable into central connector block)

• Choice of beam angles: 15°, 24° or 35°




85

15

68

42

Ø75

3

3 x 1.2W Downlight

3 x 1.2W LED


350mA

IP20

6

6 x 1.2W LED




IP20

www.suntrade.co

m.ua

Recessed Wall Asymmetric

• Compact square wall guidance luminaire for interior recessing housing or hollow walls

• Hidden light source gives glare-free light

• Asymmetric reflector casts an even wash of light onto the floor

• Comes pre-wired with cable tail for use with remote 24V DC converter


• Finished anodised aluminium

• Recessed box available as an accessory

D-CO LED WALL ASYM 1.6W 6.5K 24V

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

6001800 1200

106

106

106

84

84

41

43 4

94

1.2W Mini Downlight

• Miniature round, fixed, recessed downlight

• Comes pre-wired with cable tail for use with remote switchable or dimmable converter

• Precise 20° beam in either warm white (3000K) or cold white (4000K) options

• Available in kit form - 5 downlights, individually pre-wired with connector cables and single converter (pre-wired with cable into central connector block)


• Ideal for decorative effects (night sky), shelves and display cases

24

Ø28

17

2

27

35

35

Ø40

Ø30

Ø26

1 x 1.2W LED


350mA, 230V as kit with driver

IP20

1.6W LED


24V DC

IP20

7

150

9410

45/85www.suntrade.co

m.ua

SAP code SAP description Description 1.2W Mini

Downlight

3 x 1.2W Downlight

6 x 1.2W Downlight

6 x 1.2W Downlight

Multi-directional

1.6W Asymmetric

Wall Recessed

96107644* LED CONVERTER 8W DC24V 8W switchable - - - - 5

96107645* LED CONVERTER 25W DC24V 25W switchable - - - - 15

86455937* LED 0025 K210 24V One4all 25W dimmable - - - - 15

96107646* LED CONVERTER 8W 350mA 100-240V 3PLUG 8W switchable inc 3 way connector 6*** 2 - - -

96107647* LED CONVERTER 12W 350mA 100-240V 6PLUG 12W switchable inc 6 way connector 10*** 3 - - -

96107648* LED CONVERTER 6W 350mA 230V 1-10 DIM 6W dimmable 5 1 - - -

96107649* LED CONV 15/25W UNI 110-240V DIM** 15W/25W dimmable 12 4 2 2 -

96107650 LED MULTIPLUG 3WAY SERIES 350mA 3 way connector 3 3 3 3 -

96107651 LED MULTIPLUG 6WAY SERIES 350mA 6 way connector 6 6 - - -

D-CO LED Driver range overview (number of fittings per driver)350mA + 24V luminaires

SAP code SAP description Description 3W Spotlight


3W Mini Spotlight with flexible arm and integrated gear

3 x 3W Downlight

96107649* LED CONV 15/25W UNI 110-240V DIM** 15W/25W dimmable 8 8 - 2

96108001* LED CONVERTER 3W 700mA 100-240V 3PLUG 3W switchable inc 3 way connector 1 1 - -

96108002* LED CONVERTER 12W 700mA 100-240V 6PLUG 12W switchable inc 3 way connector 4*** 4*** - 1

96108003* LED CONVERTER 18W 700mA 100-240V 6PLUG 18W switchable inc 3 way connector 6*** 6*** - 2

96107980 LED MULTIPLUG 3WAY SERIES 700mA 3 way connector 3 3 - 3

96108000 LED MULTIPLUG 6WAY SERIES 700mA 6 way connector 6 6 - 6

* Secondary side: cable length 15m maximum, cross section 2 x 1.5mm2 recommended** 96107649 fits both 350mA luminaires (total load up to 15W) and 700mA luminaires (total load up to 25W)*** The maximum number of fittings per driver can be connected by ordering an additional multiplug connector (3 or 6 way)

Technical information

8

700mA luminaires

www.suntrade.co

m.ua

86455937LED 0025 K210 24V One4all25W driver for wall asymmetric, dimmable

Switch dimming

L

D1D2

N

Switch Dim

96107648LED CONVERTER 6W 350mA 230V DIM driver for all downlights and spots, dimmable

96107649LED CONV 15/25W UNI 110-240V DIM driver for all downlights and spots, dimmable

Input

Output

Output for 350mA (all downlights and spots)

Output for 24V (Asymmetric Wall Recessed)

LN

LN

+–

+–

1 to 10 Volt Dimming

Push dimming

1 to 10V

LN

LN

1 to 10V

LN

1 to 10 Volt Dimming

Push dimming

LN

+–

+–

1 to 10V

LN

LPush

N

1 to 10V

LPush

N

1 to 10V

+

–

350mA

+

–

350mA

+

–

350mA

LED multiplugThorn standard item3 or 6 connector boxSAP code 96107650 and 96107651

+

–

24V

On site installation boxstandard wholesaler item

+

–

24V

Output for 700mA

+

–

700mA

+

–

700mA

+

–

700mA

LED multiplugThorn standard item3 or 6 connector boxSAP code 96107980 and 96108000

9

The 350mA connector accepts the 350mA and 700mA extension cables

The 700mA connector only accepts the 700mA extension cable

www.suntrade.co

m.ua

Materials/Finish Bodies: die-cast aluminium with white or Titan grey finish Asymmetric Wall: anodised aluminium

InstallationDownlights fixed with 2 spring clips. Suitable for ceiling thicknesses between 1 and 22mm (3 x 1.2W model, 1-25mm). Downlight cut out diameters: 3x3W Ø 80mm; 6x1.2W Ø 90mm; 6x1.2W Gyro Ø 105mm; 3x1.2W Ø 75mm and 1x1.2W Ø 30mm. Asymmetric Wall suitable for wall thickness between 1 and 19mm. Minimum void depth 43mm. Also fits recessing box (minimum void depth 55mm or 95mm for the deep version) Pre-wired halogen-free cable included. Length 0.7m. Extension cable between fittings available. Length 1 or 2m. Downlights and spots connect in series. Kits are individually pre-wired with cables for plug and play connection into a central connector block (pre-wired with cable into a single converter). Wall lights connect in parallelDimmable converters 2-100%

Indoor version product features and ordering guides

Description Weight (Kg)

SAP Code

3W Mini Spotlight

D-CO LED MINI SP 1x3W 3K 20° 700mA GRY Mini Spotlight 0.1 96107965

D-CO LED MINI SP 1x3W 4K 20° 700mA GRY Mini Spotlight 0.1 96107966

D-CO LED MINI SP 4/1x3W 3K20° 230V KIT Kit of 4 Mini Spotlight and 1 switchable driver 0.4 96107967

D-CO LED MINI SP 4/1x3W 4K20° 230V KIT Kit of 4 Mini Spotlight and 1 switchable driver 0.4 96107968


D-CO LED MINI FLEx 1x3W 3K 20° 700mA GRY Mini Spot with flexible arm 0.2 96107865

D-CO LED MINI FLEx 1x3W 4K 20° 700mA GRY Mini Spot with flexible arm 0.2 96107866

D-CO LED MINI FLEx 1x3W 3K 20° 230V GRY Mini Spot with flexible arm and integrated gear 0.3 96107867

D-CO LED MINI FLEx 1x3W 4K 20° 230V GRY Mini Spot with flexible arm and integrated gear 0.3 96107868

Low glare 3 x 3W Downlight

D-CO LED DL 3x3W 3K 60° 230V GRY Low glare DL incl. switchable driver 0.4 96107861

D-CO LED DL 3x3W 4K 60° 230V GRY Low glare DL incl. switchable driver 0.4 96107862

D-CO LED DL 3x3W 3K 60° 230V WHI Low glare DL incl. switchable driver 0.4 96107863

D-CO LED DL 3x3W 4K 60° 230V WHI Low glare DL incl. switchable driver 0.4 96107864

D-CO LED DL 3x3W 3K 60° 700mA GRY Low glare DL for dimmable drivers (delivered w/o driver) 0.4 96107975

D-CO LED DL 3x3W 3K 60° 700mA WHI Low glare DL for dimmable drivers (delivered w/o driver) 0.4 96107976

6 x 1.2W Downlight (grey or white)

D-CO LED DL 6x1.2W 3K 15° 230V GRY Grey version incl switchable driver 0.4 96107443






D-CO LED DL 6x1.2W 3K 15° 230V WHI White version incl switchable driver 0.4 96107846






6 x 1.2W Downlight Gyro (grey or white)

D-CO LED DL 6x1.2W GYRO 3K 15° 230V GRY Grey version incl switchable driver 0.4 96107449






D-CO LED DL 6x1.2W GYRO 3K 15° 230V WHI White version incl switchable driver 0.4 96107852






6 x 1.2W Downlight w/o driver for dimmable gears

D-CO LED DL 6x1.2W 3K 15° 350mA WHI only white versions with 3000K, for dimmable drivers (delivered w/o driver) 0.3 96107969



D-CO LED DL 6x1.2W GYRO 3K 15° 350mA WHI only white versions with 3000K, for dimmable drivers (delivered w/o driver) 0.3 96107972



Ordering guide

10

www.suntrade.co

m.ua


3 x 1.2W Downlight

D-CO LED DL 3x1.2W 3K 15° 350mA GRY Grey version (delivered w/o driver) 0.3 96107431






D-CO LED DL 3/3x1.2W 3K 15° 230V KIT GRY Kit of 3 Downlight and 1 switchable driver 0.9 96107437






1.2W Mini Downlight

D-CO LED MINI DL 1x1.2W 3K 20° 350mA GRY Mini Downlight 0.1 96107427

D-CO LED MINI DL 1x1.2W 4K 20° 350mA GRY Mini Downlight 0.1 96107428

D-CO LED MINI DL 5/1x1.2W 3K20° 230V KIT Kit of 5 Mini Downlight and 1 switchable driver 0.4 96107429

D-CO LED MINI DL 5/1x1.2W 4K20° 230V KIT Kit of 5 Mini Downlight and 1 switchable driver 0.4 96107430

Recessed wall asymmetric

D-CO LED WALL ASYM 1.6W 3K 24V Asymmetric fitting for wall installation 0.1 96107419

D-CO LED WALL ASYM 1.6W 6.5K 24V Asymmetric fitting for wall installation 0.1 96107420

D-CO LED WALL CONCRETE MTG BOx Concrete mounting box for asymmetric fitting 0.1 96107421

D-CO LED WALL CONCRETE MTG BOx DEEP Concrete mounting box for asymmetric fitting 0.1 96107422

WHI - white, GRY - grey

Drivers/transformers Ordering guideDescription Weight (Kg) SAP Code

Drivers for 700mA fittings

LED CONV 15/25W UNI 110-240V DIM Dimmable 1 - 10V 0.1 96107649

LED CONVERTER 3W 700mA 100-240V 3PLUG Incl multiplug 3 way connector 0.1 96108001



Drivers for 350mA fittings

LED CONV 8W 350mA 100-240V 3PLUG Incl 3plug connector 0.1 96107646

LED CONV 12W 350mA 100-240V 6PLUG Incl 6plug connector 0.1 96107647

LED CONVERTER 6W 350mA 230V 1-10 DIM Dimmable switchDIM 1 - 10V 0.1 96107648

LED CONV 15/25W UNI 110-240V DIM Dimmable 1 - 10V 0.1 96107649

Tranformers for 24V fittings (Wall asymmetric)

LED CONVERTER 8W DC24V 0.1 96107644

LED CONVERTER 25W DC24V 0.1 96107645

LED 0025 K210 24V one4all Dimmable 0.1 - 100% switchDIM, DALI, DSI 0.1 86455937

Attachments Ordering guideDescription Weight (Kg) SAP Code

LED ExTENSION 2m PLUG/SOCKET 350mA 2m Extension cable 350mA 0.1 96107977

LED ExTENSION 2m PLUG/SOCKET 700mA 2m Extension cable 700mA 0.1 96107978

LED ExTENSION 1m SOCKET/CLIP 350mA 1m Extension cable 350mA 0.1 96108024

LED ExTENSION 1m SOCKET/CLIP 700mA 1m Extension cable 700mA 0.1 96108025

LED MULTIPLUG 3WAY SERIES 700mA Multiplug 3 way for 700mA versions 0.1 96107980




Ordering guide (continued)

Converters are available with constant output voltages of 24V for the asymmetric wall fitting and with constant output currents of 350mA and 700mA for all downlights and spotlights. There are both dimmable and non-dimmable versions for both types. All versions are thermally stable to ensure optimum operation and long life. Other benefits include safety extra low voltage (SELV) and EMC protection.

11

www.suntrade.co

m.ua

Mini Recessed

• Miniature, recessed, round walkover luminaire

• LEDs in blue or white (warm white 3000K or cold white 4000K)

• Supplied pre-wired with remote gear, recessed box, plastic end cap, connectors and 3way connection box

• Available in kit form - 6 fittings, individually pre-wired with recessed box, plastic end cap and 8way connection box containing gear and connectors. If a single LED fails, the other LEDs continue to operate.

• Choice of clear or frosted glass in stainless steel frame

• Twin domed window option

• All versions are low temperature ‘touch’

0˚ 30˚ -30˚ -60˚ -90˚

cd

0

100

200

300

400

500

600

700

800

60˚ 90˚

D-CO R LED Mini 4000KImax:690cd Flux: 55lm Aperture Imax/2: 2 x 6.2°

Medium Recessed

• Medium sized, recessed round walkover luminaire


• Supplied pre-wired with recessed box and plastic end cap

• Integral gear

• Frosted glass

• Low temperature ‘touch’

Ø95Ø84

126120

Ø86

Ø39

Ø47

10190

Ø39

Ø47

9390

Ø263

Ø95Ø84

126120

Ø86

1.2W LEDs

EN60598-2-13

Class II electrical

IK10 impact resistance

IP68

1.2W LEDs

EN60598-2-13

Class II electrical


IP67

12

OK

OKOK

OK

OK

OKOK

OK

www.suntrade.co

m.ua

Maxi Recessed

• Large sized, recessed round walkover luminaire

• Clear glass


• Supplied pre-wired with recessed box and plastic end cap

• Halogen and compact fluorescent versions

• Integral gear

• Tilt: +/- 24° for the LED version, +/- 42° for the dichroic version, +/- 22° for the compact fluorescent version

0˚ 30˚ -30˚ -60˚ -90˚

cd

0

500

1000

1500

2000

2500

3000

3500

4000

4500

60˚ 90˚

D-CO R LED MAXI 4000KImax:3960cd Flux: 345lm Aperture Imax/2: 2 x 6.4°

• Circular compact floodlight with smooth edges

• LEDs in warm white (3000K) or cold white (4000K)

• Stirrup or ground spike mounting

• Visor to limit glare

• Two body sizes

• All versions have integral gear

• Supplied pre-wired

0˚ 30˚ -30˚ -60˚ -90˚

cd

0

500

1000

1500

2000

2500

3000

60˚ 90˚

D-CO F LED FLOOD2 3000KImax:2410cd Flux: 179lm Aperture Imax/2: 2 x 6.1°

Flood50

60

138

180

80

50

156

255

1.2W LEDs

50W QR-CBC Cap: GZ10

14W TC-TSE Cap: E27

EN60598-2-13

Class I electrical


IP67

1.2W LEDs

EN60598

Class I electrical


IP67

Ø165

199

Ø241

13

www.suntrade.co

m.ua

Outdoor version product features and ordering guides

D-CO LED Outdoor

Description Weight

(Kg)Colours SAP Code

Recessed MiniD-CO R LED MINI 1x1.2W WHI 4K CL 0.5 Cold white 96257227D-CO R LED MINI 1x1.2W WHI 3K CL 0.5 Warm white 96257228D-CO R LED MINI 1x1.2W BLU CL 0.5 Blue 96257229D-CO R LED MINI 1x1.2W WHI 4K FR 0.5 Cold white 96257230D-CO R LED MINI 1x1.2W WHI 3K FR 0.5 Warm white 96257231D-CO R LED MINI 1x1.2W BLU FR 0.5 Blue 96257232D-CO R LED MINI 1x1.2W WHI 4K EW2 0.5 Cold white 96257233D-CO R LED MINI 1x1.2W WHI 3K EW2 0.5 Warm white 96257234D-CO R LED MINI 1x1.2W BLU EW2 0.5 Blue 96257235

Recessed Mini KitsD-CO R LED MINI 6/1x1.2W WHI 4K CL KIT 1.4 cold white 96257248D-CO R LED MINI 6/1x1.2W WHI 3K CL KIT 1.4 warm white 96257249D-CO R LED MINI 6/1x1.2W BLU CL KIT 1.4 Blue 96257250D-CO R LED MINI 6/1x1.2W WHI 4K FR KIT 1.4 Cold white 96257251D-CO R LED MINI 6/1x1.2W WHI 3K FR KIT 1.4 warm white 96257252D-CO R LED MINI 6/1x1.2W BLU FR KIT 1.4 Blue 96257253D-CO R LED MINI 6/1x1.2W WHI 4K EW2 KIT 1.4 Cold white 96257254D-CO R LED MINI 6/1x1.2W WHI 3K EW2 KIT 1.4 warm white 96257255D-CO R LED MINI 6/1x1.2W BLU EW2 KIT 1.4 Blue 96257256

Recessed MediumD-CO R LED MEDIUM 1x1.2W WHI 4K FR 0.7 Cold white 96257236D-CO R LED MEDIUM 1x1.2W WHI 3K FR 0.7 warm white 96257237D-CO R LED MEDIUM 1x1.2W BLU FR 0.7 Blue 96257238

Recessed MaxiD-CO R LED MAxI 6x1.2W WHI 4K CL 3.0 Cold white 96257239D-CO R LED MAxI 6x1.2W WHI 3K CL 3.0 warm white 96257240

D-CO R LED MAxI 6x1.2W BLU CL 3.0 Blue 96257241

D-CO R MAxI 50W QPAR-CB 51 GZ10 OS CL 3.0 96257242D-CO R MAxI 14W TC-TSE E27 OS/FACI CL 3.0 96257243

Floodlights Size 1D-CO F LED FLOOD1 3x1.2W WHI 3K 0.4 warm white 96257244D-CO F LED FLOOD1 3x1.2W WHI 4K 0.4 cold white 96257245

Floodlights Size 2D-CO F LED FLOOD2 6x1.2W WHI 3K 0.9 warm white 96257246D-CO F LED FLOOD2 6x1.2W WHI 4K 0.9 cold white 96257247

Connection boxesCON CABLE BOx 2 ENTRIES 1 ExIT IP67 0.3 96257258CON CABLE BOx 2 ENTRIES 6 ExIT IP67 0.4 96257259WHI - white, BLU - blue, CL - Clear glass, FR - Frosted glass, EW2 - 2 windows

Materials/FinishRecessed unitsBody: aluminium (except medium, PC/ABS blend), CNC ElectrophoresisRecessed housing: aluminium (except Maxi - ABS) with plastic end capGlass: toughened frosted or clearFrames/Windows: stainless steel316LGasket: anti-ageing siliconeReflector (Maxi only): aluminium

Connection boxesBody: PC/ABS blend

FloodlightsBody: aluminium, finished in greyGlass: toughened glassGasket: anti-ageing siliconeStirrup: aluminium finished in greySpike: aluminium finished in black

Installation/MountingRecessed unitsIn ground: To ensure efficient drainage, gravel must be used to a depth of 300mm beneath the housing. The plastic end cap prevents ingress of concrete during installation.

All the fittings are supplied with 5m cable. Single Mini units are supplied pre-wired with cable with remote gear, recessed box, plastic end cap, connectors and 3 way connection box. Mini kit luminaires are individually pre-wired with cable and supplied with an 8 way connection box, containing gear and connectors - including a specific connector for through wiring. If a single LED fails, the other system LEDs continues to operate. Connector has LED failure alerting display. Static load: 500kg

FloodlightsSupplied pre-wired with 5m cable

Connection boxesTwo versions: One has 3 glanded cable entries 2x PG13 (in) and 1x PG9 (out), the other 8 glanded cable entries 2 x PG13 (in) and 6 x PG9 (out).

14

www.suntrade.co

m.ua

15

www.suntrade.co

m.ua


www.pefc.org


Publication No: 491 (IS) Publication Date: 06/10
























www.suntrade.co

m.ua

Aesthetical spotlight range with innovative beam angle adjustment

Graffiti

www.suntrade.co

m.ua

Freedom and Flexibility

Directed light can be used for creating stimulating and eye-catching effects. Generallythere are several aims in accentlighting, firstly to make the set-upstand out from the general lightand secondly to guide thecustomer’s eye.

Different directions of light canhave a big impact on theperception of an object. One can create different moods andperceptions just by redirecting thelight - see the Lighting effectssection on page 4 for examples.

In retail applications, shopwindows need to grab theattention of passers by. Thewindow display is an exhibitionof the brand - a way forcompanies to display theiridentity. Spotlighting is a crucialelement in getting the right image.

Artefacts, artwork and objects ofinterest can also benefit fromdirectional light to emphasisekey features.

An effective and interestingaccent light has to be created onsite. With the new Graffiti rangethe task of ‘painting’ with light ismade easy for the scene creator,thanks to the stepless* adjustablebeam angles, which ensure anoptimal cone of light for everysingle need!

Colour filters, barndoors andlouvres further extend theflexibility of this range, which inturn enhances the control youhave in designing an attractivedisplay. DSI controllable Phasedimmers enable you to integratethe Graffiti range into projectswhere Indoor Lighting Controlsare used. In this way Graffiti cannow be part of exciting differentand changing scenarios or canbe daylight-linked to contribute tothe saving of energy by centralcontrol of the whole track.

*Stepless - Freedom and flexibilityin selection of beam angle.

Spotlighting or accent lightingcan be viewed as the tool for‘painting’ displays with light

2

www.suntrade.co

m.ua

Easy beam angle adjustment

3

www.suntrade.co

m.ua

Normal lighting

Light from the top Light from below

Lighting effects

When illuminating items in a display avariety of beam and lighting angles can be combined to give the desired effect.With attachments and colour filters theamount of control you have is endless.

The choice of beam angle(thereby light intensity and areacovered by light) combined withthe choice of lamp type can have a major influence onthe appearance and perceptionof the illuminated object. Bydefault there are a few rules ofthumb, but ‘painting’ the set with light with the use ofimagination and re-aiming fromdifferent spot locations normallygives the best result. Rememberthat not only are the objects litbut also the light awakens thecustomers interest. The brand ofthe store or the goods can bebuilt and strengthened byexcellent lighting.

In these pictures the impact ofdifferent spotlight locations andbeam angles is clearly shown.Thanks to Graffiti’s ‘stepless’beam angle adjustment, onecan fine tune or change theappearance with ease. A strong,intense side light could bechanged into a medium or soft -just by the twist of the backsection of the spotlight!

Medium light from the sideStrong light from the side

Lighting from the front or multiple directions -‘Normal light’The most common solution eventhough it is rarely the best.Flattens all textures and facialirregularities giving a dullimpression that lacks eye-catching appearance.

Light from the topGives a more naturalappearance as we are used toseeing things being lit by the sun.Medium texture visibility andnatural shadow play.

Light from belowThis solution should be used withcaution as it can create a strangeimpression, very unnatural butwith great eye-catching effects.Great texture visibility andspooky shadowing.

4

www.suntrade.co

m.ua

Soft light from the side

5

Users can control the lighting tomatch their needs

A picture space could forexample, be easily reconfiguredwhen the need arises.

The small painting (1) is replacedby a larger one. A wider beamis now needed to prevent darkcorners (2) and to give uniformlighting - this is easily achievedby a simple twist of the backsection of Graffiti M and L (3).

1

2 3

Side lightingThree examples of light comingfrom the side. In the first examplethe light is hard and direct givingextra life to the object andshowing textures if present. This can easily appear too harsh or unfriendly.The third example has a softersidelight giving a more naturalbut less dramatic perception.Textures are more suppressedand shadows are less defined.

CombinationsEvery case is different and eachshape really needs its owncombination of light directions.Try to redirect, redirect andredirect until the best solution is found!

Textures always benefit from anarrow, hard light introduced ata low angle. Light from the frontof a texture (in line with theviewer) will always flatten thestructures and reduce shadowing.

www.suntrade.co

m.ua

6

Illumination of textureNotice the effects of direction.Shown left is the clear directionalquality of spotlighting - the fabricreveals its texture, while to theright directional effects arevirtually absent.

Lighting effects

Colour filtersColour filters can add effects to the set, but they must be usedwith care, as over flooding yourscene with colour can distort thecolours you wish to preserve.

Fabric illuminated at a low angle Same fabric illuminated from the front

www.suntrade.co

m.ua

7

Beam angleA combination of beam angleoptimisation and barn doors can reduce ‘light spill’ and cutsoff the light in undesired areas.

www.suntrade.co

m.ua

8

Introduction to the Graffiti Range

• Graffiti is available in threeversions, Small, Medium andLarge. A wide range of lampsand wattages are alsoavailable to suit yourapplication.

• Each member of the range hasa surface or track mountingsolution (L surface versionavailable to order only)

• The pure and simple shape ofGraffiti is reflected through allsizes creating a consistentdesign theme throughout therange. The unobtrusive designfeatures complement allenvironments and integratewell with a variety ofarchitectural styles.

• High quality range constructedfrom durable die-castaluminium

• High grade spun, anodisedaluminium reflectors houseinnovative stepless adjustablebeam angles 10°-35° (narrow)and 25°- 55° (wide, exceptversion S)

• Sturdy metal stem in metallicfinish

• The optimised control of lightand high levels of flexibilitymake Graffiti the perfectchoice for ever changingdisplays

• Silver reflectors as standard,gold finish available to order

• Easy to install user-focusedattachments with simplebayonet function

• Graffiti can be used toenhance both the lit andaesthetic environment in avariety of retail and leisureapplications like shops andmuseums

• Some versions of the Graffitirange (depending on the lamp)can be dimmed via DSI signalsor momentary action switches,using DSI controllable Phasedimmers (available asaccessories) providing centralcontrol for the whole track.

The Graffiti range has beencarefully designed with discreetsimplicity. Graffiti not only looksrefined but each design detailfulfils a technical requirement.

www.suntrade.co

m.ua

Materials/FinishBody: die-cast aluminium wetpainted white (close to RAL9016) or silver/grey (RAL 9007)Reflector: spun high gradeanodised aluminium silver finishas standard, gold available onrequest. Reflectors have facetsthat mix the light rays to ensure auniform colour temperature withinthe light beamStem: steel with high frictionjoint, silver finishProtective front glass for M andL versions.

Installation/MountingSuitable for 3 circuit multiadaptor(1 circuit France only) orsurface mounting.3 x 2 x 2.5mm2 piano key terminalblock and 10mm cable entry inthe back and sides as break outfor surface mounted versions. Graffiti S uses a screwterminal 2 x 1.5mm withoutlooping possibilities.Rotation 0° - 360°Tilt 0° - 90°Attachments easily mounted bytool-free bayonet function.

9

Spotlights can be supplied withlamps to order.Track mounting: mechanical andelectrical track connection ismade using the track adaptor,which locates quickly andpositively to the track via twostable clamping points with asimple clockwise turn of the fixinglever. Select the desired circuit(1, 2 or 3) using the selector onthe top of the trackbox beforeinstalling onto the track.

StandardsDesigned and manufactured tocomply with EN60598.

Class I Electrical 850°C fire retardantIK02 IP20

www.suntrade.co

m.ua

Lamps50-100W, PAR 20/30

(HEG-PAR) halogen. Cap: E2735-50W, PAR16 (HR) halogen.

Cap: GZ1035-50W, QR-CBC (HRG)

halogen. Cap: GU5.3

SpecificationTo specify state:Small spotlight for 50-100W PAR20/30/35-50W PAR 16/35-50W QR-CBC, halogen lamps.As Thorn Graffiti S.

10

Graffiti S

Small spotlights for PAR and QRTungsten halogen lamps withfixed beam angles. Careful lampselection provides variousalternative beam characteristics.

• Surface mounting or 3 circuittrack (Multi adaptor). (1 circuitadaptors for France only)

• Mains and low voltageversions available. Low voltageversions have an integralelectronic transformer inadaptor or surface plate

• DSI or momentary actionswitch controllable Phasedimmers (40-500VA and 40-1000VA) are sold separatelyand can be used for allversions of Graffiti S as centralcontrol of the whole track.

PAR 20 Silver/grey, surface mounted

QR-CBC white

PAR 30 White, track mountedwww.suntrade.co

m.ua

• Stepless adjustable beamangles for QT12 and HIT-TCversions

• Surface mounting or 3 circuittrack (Multi adaptor)

• Wide choice of Tungstenhalogen or metal halide lamps

• Mains and low voltageversions available

• DSI or momentary actionswitch controllable Phasedimmers (40-500VA and 40-1000VA) are sold separatelyand can be used for the QT12and QR111 versions of Graffiti M as central control ofthe whole track.

Lamps50-100W, QT12 (HSG)

halogen. Cap: GY6.3535-70W, HIT-TC-CE (MT)

metal halide. Cap: G8.550-100W QR111 (HMG)

halogen. Cap:G5335-70W HIPAR111 (MR)

metal halide. Cap:GX8.5

SpecificationTo specify state:Medium spotlight for 50-100WQT12/ 50-100W QR111halogen lamps, 35-70WHIT-TC/35-70W HIPAR111 metal halide lamps.As Thorn Graffiti M.

11

Graffiti M

Silver/grey surface mounted White track mounted

Medium spotlight with twodifferent reflector options, narrowor wide, and stepless adjustablebeam angles

www.suntrade.co

m.ua

12

Graffiti L

High power spotlight with two different reflector options,narrow or wide, and steplessadjustable beam angles

• Stepless adjustable beam angles

• Surface or 3 circuit track (Multi adaptor)

Lamps

50-100W, HST (STH) WhiteSON. Cap: GX12

150W, HIT-CE (MT) metalhalide. Cap: G12

SpecificationTo specify state:High power spotlight for50-100W HST White SONand 150W HIT-CE metalhalide lamps.As Thorn Graffiti L.

Silver/grey, track mountedwww.suntrade.co

m.ua

13

Accessories

Louvre attachment

Barn doors

Gold reflector available on request

However if not used with care itcan have a destructive effect bothphysically and aesthetically asInfra Red and Ultra Violet rays canhave a damaging effect.Combining Graffiti with IR/UVfilters can reduce this risk as theycan keep goods cool by protectingthem from hot infra red andbleaching ultra violet rays.

Additionally combining a foodfilter with an HIT lamp canintensify the colour of the goods,giving them a warm glow. Youcan also use a gold reflector tobring out the intensity of colour inall warm coloured food, forexample bread, roasts and cheese.

When using colour filters there isa difference between desirableand undesirable colours. If notused with care goods canbecome over saturated withcolour creating an unnaturalappearance.

The lighting of fabrics andgarments works in a similar wayto food. Materials are stillsensitive to IR and UV rays, butone differentiator is that artificiallight distorting the ‘true’ colourmight mislead the customer. Forexample when that beautiful‘Bordeaux’ coloured dress turnsout to be brown in the sunlight!

If you don’t want to ‘spray paint’the surrounding area with lightand optimised control of light iswhat you need, then use a barndoor attachment or louvre to fine-tune your lighting display.

When using a selection ofdifferent colour filters side by side,it is possible to create an undesiredcolour in the transition area.Using a barn door attachmentcan effectively cut off light at theright place.

Lamp Metal halide White SON White SON White SONReflector Silver Silver Silver GoldFilter IR/UV IR/UV Food IR/UV

FoodCheese • •Grilled* •Red fish • •White fish •Meat •Sausage •Fruits • •Bakeries • •*No filterIllumination should not exceed 2 x general lighting levels

Food lighting is an excellentexample where spotlighting can be of benefit

www.suntrade.co

m.ua

14

Ordering Guides & Dimensions

Graffiti S Ordering Guide Lamps to be ordered separatelyAll versions have a fixed lamp position

Description Ilcos Socket Weight SAP Code SAP CodeCode (Kg) white silver/grey

Graffiti S - Surface mountedGRAFFITI S 1X75W PAR30 MSF HEG-PAR E27 0.5 96106670 96106678GRAFFITI S 1X50W PAR16 GZ10 MSF HR GZ10 0.5 96106671 96106679

Graffiti S - Single circuit track mounted (France only)GRAFFITI S 1X75W PAR30 MT1 HEG-PAR E27 0.5 96106672 96106680GRAFFITI S 1X50W PAR16 GZ10 MT1 HR GZ10 0.5 96106673 96106681GRAFFITI S 1X50W QR-CBC MT1* HRG GU5.3 0.2 96106674 96106682

Graffiti S - Three-circuit track mountedGRAFFITI S 1X75W PAR30 MT3 HEG-PAR E27 0.5 96106675 96106683GRAFFITI S 1X50W PAR16 GZ10 MT3 HR GZ10 0.5 96106676 96106684GRAFFITI S 1X50W QR-CBC MT3* HRG GU5.3 0.3 96106677 96106685*Integral electronic transformer

196.5

102.8

117

90

77

202.6

162.8

114.5

102

122

Surface/Track version PAR 16 and QR-CBC

Graffiti S, PAR 30 Silver/greyGraffiti S, PAR 20 Silver/greyGraffiti S, PAR 16 Silver/grey

Graffiti S, PAR 30 WhiteGraffiti S, PAR 20 WhiteGraffiti S, PAR 16 White

Surface/Track version PAR 20/30

Accessories


DSI phase or reverse phase dimmer, auto load detection, 40-500VA and 40-1000VAPDAX 500VA 0.2 22154307PDAS 1000VA 0.4 22154306PDAX - mounted behind recessed ceilings, PDAS - mounted in cabinet

www.suntrade.co

m.ua

15

Graffiti M Ordering Guide Lamps to be ordered separately


Graffiti M - Surface mounted fixed beamGRAFFITI M 1X100W QR111 MSF* HMG G53 1.4 96106694 96106705GRAFFITI M 1X35W HIPAR111 GX8,5 MSF MR GX8.5 1.4 96106695 96106706GRAFFITI M 1X70W HIPAR111 GX8,5 MSF MR GX8.5 1.4 96106696 96106707

Graffiti M - Surface mounted - narrow beamGRAFFITI M 1X90W QT12 MSF SP*** HSG GY6.35 1.4 96106686 96106697GRAFFITI M 1X20W HIT-TC G8,5 MSF SP** MT G8.5 1.4 96106688 96106699GRAFFITI M 1X35W HIT-TC G8,5 MSF SP** MT G8.5 1.4 96106690 96106701GRAFFITI M 1X70W HIT-TC G8,5 MSF SP** MT G8.5 1.4 96106692 96106703

Graffiti M - Surface mounted - wide beamGRAFFITI M 1X90W QT12 MSF FL*** HSG GY6.35 1.4 96106687 96106698GRAFFITI M 1X20W HIT G8,5 MSF FL** MT G8.5 1.4 96106689 96106700GRAFFITI M 1X35W HIT G8,5 MSF FL** MT G8.5 1.4 96106691 96106702GRAFFITI M 1X70W HIT G8,5 MSF FL** MT G8.5 1.4 96106693 96106704

Graffiti M - Three-circuit track mounted fixed beamGRAFFITI M 1X100W QR111 MT3* HMG G53 1.3 96106716 96106727GRAFFITI M 1X35W HIPAR111 GX8,5 MT3 MR GX8.5 1.3 96106717 96106728GRAFFITI M 1X70W HIPAR111 GX8,5 MT3 MR GX8.5 1.3 96106718 96106729

Graffiti M - Three-circuit track mounted - narrow beamGRAFFITI M 1X90W QT12 MT3 SP*** HSG GY6.35 1.3 96106708 96106719GRAFFITI M 1X20W HIT-TC G8,5 MT3 SP** MT G8.5 1.3 96106710 96106721GRAFFITI M 1X35W HIT-TC G8,5 MT3 SP** MT G8.5 1.3 96106712 96106723GRAFFITI M 1X70W HIT-TC G8,5 MT3 SP** MT G8.5 1.3 96106714 96106725

Graffiti M - Three-circuit track mounted - wide beamGRAFFITI M 1X90W QT12 MT3 FL*** HSG GY6.35 1.3 96106709 96106720GRAFFITI M 1X20W HIT-TC G8,5 MT3 FL** MT G8.5 1.3 96106711 96106722GRAFFITI M 1X35W HIT-TC G8,5 MT3 FL** MT G8.5 1.3 96106713 96106724GRAFFITI M 1X70W HIT-TC G8,5 MT3 FL** MT G8.5 1.3 96106715 96106726*Integral electronic transformer**Stepless adjustable version*** Integral electronic transformer and stepless adjustable version

136

9263

208

259

258

163

60

289

136208

263

248

289

Surface versionGraffiti M, White Graffiti M, Silver/grey

Track version

Attachments


GRAFFITI M FILTER RED 0.1 96106742GRAFFITI M FILTER BLU 0.1 96106743GRAFFITI M FILTER GRN 0.1 96106744GRAFFITI M FILTER YEL 0.1 96106745GRAFFITI M FILTER IR/UVA 0.1 96106746GRAFFITI M FILTER FOOD 0.1 96106747GRAFFITI M LV BLK 0.1 96106748GRAFFITI M BARN DOOR BLK 0.2 96106749IR/UVA - Integrated IR and UV filter, LV - Louvre

Accessories for QT12 and QR111 versions


DSI phase or reverse phase dimmer, auto load detection, 40-500VA and 40-1000VAPDAX 500VA 0.2 22154307PDAS 1000VA 0.4 22154306PDAX - mounted behind recessed ceilings, PDAS - mounted in cabinet

www.suntrade.co

m.ua

Graffiti L Ordering GuideLamps to be ordered separately


Graffiti L - Three-circuit track mounted - narrow beamGRAFFITI L 1X150W HIT G12 MT3 SP** MT G12 1.8 96106730 96106736GRAFFITI L 1X50W HST GX12 MT3 SP** STH GX12 1.7 96106732 96106738GRAFFITI L 1X100W HST GX12 MT3 SP** STH GX12 1.7 96106734 96106740

Graffiti L - Three-circuit track mounted - wide beam - whiteGRAFFITI L 1X150W HIT G12 MT3 FL** MT G12 1.8 96106731 96106737GRAFFITI L 1X50W HST GX12 MT3 FL** STH GX12 1.7 96106733 96106739GRAFFITI L 1X100W HST GX12 MT3 FL** STH GX12 1.7 96106735 96106741**Stepless adjustable version

16

Attachments


GRAFFITI L FILTER RED 0.1 96106750GRAFFITI L FILTER BLU 0.1 96106751GRAFFITI L FILTER GRN 0.1 96106752GRAFFITI L FILTER YEL 0.1 96106753GRAFFITI L FILTER IR/UVA 0.1 96106754GRAFFITI L FILTER FOOD 0.1 96106755GRAFFITI L LV BLK 0.1 96106756GRAFFITI L BARN DOOR BLK 0.3 96106757IR/UVA - Integrated IR and UV filter, LV - Louvre

156

252

198

326

286

106

326

Graffiti L, White Graffiti L, Silver/grey

Ordering Guides& Dimensions

www.suntrade.co

m.ua

17

www.suntrade.co

m.ua

18

Photometric Data

Stepless light distributions with a simple twist of the back section of the spotlight

Graffiti Medium, wide beam (QT12 lamp) Graffiti Medium, narrow beam (QT12 lamp)

Cone diagrams are convenient for comparing alternative spotlights,but it is important not to mistake the 'cone' for a cut-off line. The sidesof the 'cone' and the angle quoted show the 'pencil' across which thebeam intensity is within 50% of its maximum value. The cone diagramalso shows the maximum direct illuminance E at various distances fromthe spotlight.

Graffiti medium, wide beam, position 1Lamp: 1x90W QT12

1058lx 1.06

2.11

3.17

4.22

265lx

118lx

66lx

2.0

3.0

4.0

1.0

Mountingheight

Average Illuminance Beamdiameter

Half beam - 2x28° 1800lm LOR: 0.76

Cd/1000lm150°

120°

90° 750 500 250 90°

60° 60°

30° 0°

30°

120°

150°

Graffiti medium, wide beam, position 1Lamp: 1x 90W QT12DLOR: 0.76 LOR: 0.76

Graffiti medium, narrow beam, position 1Lamp: 1x 90W QT12

1812lx 0.73

1.46

2.20

2.93

453lx

201lx

113lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 1200 800 400 90°

60° 60°

30° 0°

30°

120°

150°

Graffiti medium, narrow beam, position 1Lamp: 1x 90W QT12DLOR: 0.76 LOR: 0.76

Graffiti medium, wide beam, position 2Lamp: 1x90W QT12

1925lx 0.74

1.48

2.21

2.95

481lx

214lx

120lx

2.0

3.0

4.0

1.0

Mountingheight



Graffiti medium, wide beam, position 3 Lamp: 1x90W QT12

3618lx 0.49

0.98

1.47

1.96

904lx

402lx

226lx

2.0

3.0

4.0

1.0

Mountingheight


Half beam - 2x14°1800lm LOR: 0.70

Cd/1000lm150°

120°

90° 3000 2000 1000 90°

60°60°

30°0°

30°

120°

150°

Graffiti medium, wide beam, position 3 Lamp: 1x 90W QT12DLOR: 0.70 LOR: 0.70

Graffiti medium, narrow beam, position 3Lamp: 1x90W QT12

9579lx 0.24

0.48

0.72

0.96

2395lx

1064lx

599lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 7500 5000 2500 90°

60° 60°

30° 0°

30°

120°

150°

Graffiti medium, narrow beam, position 3Lamp: 1x 90W QT12DLOR: 0.68 LOR: 0.68

Cd/1000lm150°

120°

90° 1200 800 400 90°

60° 60°

30° 0°

30°

120°

150°

Graffiti medium, wide beam, position 2Lamp: 1x90W QT12DLOR: 0.72 LOR: 0.72

Graffiti medium, narrow beam, position 2Lamp: 1x 90W QT12

3949lx 0.50

1.00

1.50

2.00

987lx

439lx

247lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 3000 2000 1000 90°

60° 60°

30° 0°

30°

120°

150°

Graffiti medium, narrow beam, position 2Lamp: 1x 90W QT12DLOR: 0.76 LOR: 0.76ww

w.suntrade.co

m.ua

Graffiti medium, narrow beam, position1 Lamp: 1x70W HIT-TC-CE

7088lx 0.62

1.24

1.86

2.48

1772lx

788lx

443lx

2.0

3.0

4.0

1.0

Mountingheight



19

Graffiti Medium, wide beam (HIT lamp) Graffiti Medium, narrow beam (HIT lamp)

Graffiti medium, wide beam, position 1 Lamp: 1x 70W HIT-TC-CE

4070lx 0.88

1.75

2.63

3.51

1081lx

452lx

254lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 750 500 250 90°

60°60°

30°0°

30°

120°

150°

Graffiti medium, wide beam, position 1 Lamp: 1x 70W HIT-TC-CEDLOR: 0.62 LOR: 0.62

Cd/1000lm150°

120°

90° 1200 800 400 90°

60°60°

30°0°

30°

120°

150°

Graffiti medium, narrow beam, position1 Lamp: 1x 70W HIT-TC-CEDLOR: 0.61 LOR: 0.61

Graffiti medium, wide beam, position 2 Lamp: 1x70W HIT-TC-CE

6156lx 0.72

1.43

2.15

2.86

1539lx

684lx

385lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 1200 800 400 90°

60°60°

30°0°

30°

120°

150°


Graffiti medium, narrow beam, position 2 Lamp: 1x70W HIT-TC-CE

2741lx 0.99

1.99

2.98

3.97

685lx

305lx

171lx

4.0

6.0

8.0

2.0

Mountingheight



Graffiti medium, narrow beam, position 2 Lamp: 1x 70W HIT-TC-CEDLOR: 0.60 LOR: 0.60

Cd/1000lm150°

120°

90° 1800 1200 600 90°

60°60°

30°0°

30°

120°

150°

Graffiti medium, wide beam, position 3 Lamp: 1x70W HIT-TC-CE

8710lx 0.55

1.10

1.64

2.19

2178lx

968lx

544lx

2.0

3.0

4.0

1.0

Mountingheight



Cd/1000lm150°

120°

90° 1800 1200 600 90°

60°60°

30°0°

30°

120°

150°


Graffiti medium, narrow beam, position 3 Lamp: 1x70W HIT-TC-CE

4085lx 0.66

1.33

1.99

2.66

1021lx

454lx

255lx

4.0

6.0

8.0

2.0

Mountingheight



Cd/1000lm150°

120°

90° 3000 2000 1000 90°

60°60°

30°0°

30°

120°

150°

Graffiti medium, narrow beam, position 3 Lamp: 1x 70W HIT-TC-CEDLOR: 0.55 LOR: 0.55

www.suntrade.co

m.ua


Head OfficeThorn Lighting Holdings Limited, Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9800Fax: (44) 20 8732 9801E-mail: [email protected]: www.thornlighting.com

AustraliaThorn Lighting Pty Limited, 13 Cooper Street, P O Box 188, Smithfield, NSW 2164, AustraliaTel: (61) 2 9604 4300Fax: (61) 2 9604 4588E-mail: [email protected]: www.thornlight.com.au

Thorn DNT Airfield Lighting Pty Limited, P O Box 548, Unit 2, 7-9 Newcastle Road, Bayswater, Melbourne, Victoria 3153, AustraliaTel: (61) 3 9720 3233Fax: (61) 3 9720 8233E-mail: [email protected]: www.thornairfield.com

AustriaThorn Licht GmbH, Donau-City-Straße 11, 1220 Wien, AustriaTel: (43) 1 202 66 11Fax: (43) 1 202 66 11 12E-mail: [email protected]

ChinaThorn Lighting (Guangzhou) Operations Ltd.No.12 Lian Yun RoadEastern Section, GETDD,Guangzhou 510760,ChinaTel: (86) 20 3228 2706Fax: (86) 20 3228 1777E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd.332 Hongqi Road,Tianjin 300190,ChinaTel: (86) 22 8369 2303Fax: (86) 22 8369 2302E-mail: [email protected]

Czech RepublicThorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5Tel: +420 224 315 252Fax: +420 233 326 313E-mail: [email protected]: www.thornlight.cz


EstoniaThorn Lighting, Eesti Filiaal, Tatari 23/25, EE-10116 Tallin, EstoniaTel: (372) 656 3505Fax: (372) 656 3227E-mail: [email protected]

FranceThorn Europhane SA, 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240Website: www.thorn.frThorn Airfield Lighting, 156 Boulevard Haussann, 75379 Paris Cedex 08, FranceTel: (33) 1 49 53 62 62Fax: (33) 1 49 53 62 89E-mail: [email protected]: www.thornairfield.com

Hong KongThorn Lighting (Hong Kong) Limited,Unit 4301, Level 43, Tower 1, Metroplaza,223 Hing Fong Road, Kwai Chung, N.T.,Hong Kong,ChinaTel: (852) 2578 4303Fax: (852) 2887 0247E-mail: [email protected]: www.thorn.com.hk



LatviaThorn Lighting, Representative Office, Skolas Street 21-216, Riga LV 1010, LatviaTel: (37) 7 332 660Fax: (37) 7 332 660

LithuaniaThorn Lighting, Representative Office, Kalvariju Street 1, Vilnius 09310, LithuaniaTel: (370) 5 2 750 701Fax: (370) 5 2 731 480

New ZealandThorn Lighting (NZ) Ltd, 399 Rosebank Road, P O Box 71134, Rosebank, Auckland 7, New ZealandTel: (64) 9 828 7155Fax: (64) 9 828 7591



Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s GeneralConditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication No: 371(INT) Publication Date: 07/06

Thorn Lighting Main OfficesRussiaThorn Lighting, Novoslobodskaya Str., 21,office 406 Business Center “Novoslobodskaya 21”,Moscow 103030, RussiaTel: (7) 495 981 35 41Fax: (7) 495 981 35 42E-mail: [email protected] Website: www.thorn.ru


SingaporeThorn Lighting (Singapore) Pte Ltd,5 Kaki Buki Crescent04-02 Koyotech Building,416238 SingaporeSingaporeTel: (65) 6844 5800Fax: (65) 6745 7707E-mail: [email protected]: www.thornlight.com.sg


United Arab EmiratesThorn Lighting Ltd Dubai, Al Shoala Building, Office 301, Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2940181Fax: (971) 4 2948838E-mail: [email protected]

Thorn Gulf LLC, Al Shoala Building, Office 301/2, Block E, PO Box 1200, Deira, Dubai, UAETel: (971) 4 2948938Fax: (971) 4 2948838E-mail: [email protected]



International SalesThorn Lighting Limited, 156 Boulevard Haussmann, Cedex 08, Paris 75379, FranceTel: (33) 1 49 53 6262Fax: (33) 1 49 53 6240

Thorn Lighting Limited, Silver Screens, Elstree Way,Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) 20 8732 9802Fax: (44) 20 8732 9803E-mail: [email protected]


www.suntrade.co

m.ua

Menlo3

Lighting to the power of three

www.suntrade.co

m.ua

2

ContentsPerformance, Efficiency and Comfort p.4 - 7

Outstanding photometrics p.8 - 9

Aesthetic quality p.10 - 11

Choice - range overview p.14 - 25

Making life easy (econtrol/emergency) p.26 - 27

Making life easy (installation) p.28 - 29

Product features/ordering guides p.30 - 35

www.suntrade.co

m.ua

3

Today’s lighting designers face increasing challenges from new guidelines, energy restrictions, ceiling types and installation practices. The powerful Menlo3 range enables you to comply with all of these requirements easily, giving you back the freedom to create high quality, creative and attractive lighting schemes.

Its design has been influenced by extensive research into what users look for in a dual component luminaire*. The result is a product which meets the top 3 needs:

1. Good photometric performance tailored via three optics (p.8)

2. Good visual aesthetics across all three geometric shapes (p.10)

3. Choice and flexibility of range including three mounting options (p.15)

Menlo3 satisfies all 3 of these requirements and more, making it the clear choice in a range of office, education and commercial applications.

*Customer comments from focus group are used throughout this brochure anonymously.

Menlo3 - lighting to the power of 3

3 Geometric shapes

3 Optics

3 Mounting options

“ “

www.suntrade.co

m.ua

4

PerformanceThe ‘Performance’ component of PEC addresses the visual effectiveness of the lighting scheme in performing the required task, wherever that may be. Menlo³’s comprehensive range allows schemes to be tailored to a particular task or remain flexible enough to accommodate variability.

Successful modern office developments give equal importance to financial, environmental and social concerns and good office lighting design makes an important contribution to an economic and productive working environment, being linked to 15% reductions in absenteeism and 3-20% increases in productivity (Source: BCO/CABE)

Menlo³ fully embodies Thorn’s PEC approach to office lighting, marrying user comfort and performance with scheme efficiency. Sophisticated materials and optical design make building efficiency targets easy to achieve, enabling designers to focus on personal and environmental factors that affect employees.

With a wide choice of optics, mounting options and styling, Menlo³ not only provides appropriate task lighting but also creates a stimulating and pleasant lit working environment for people. This holistic approach all adds up to reduced absenteeism and staff turnover, increased satisfaction and productivity and ultimately lower costs.

Thorn’s PEC philosophy for Office Lighting

Saving money, and the planetIt is generally assumed that being green costs money. Menlo³ is an example of how truly sustainable product design is concerned with minimising the use of materials, resources and energy which collectively reduces costs over time.

It starts with efficient light sources such as T16 lamps or LED technology that produce high values of lumens/watt. It is then essential that the maximum amount of useful light is produced by minimising losses within the fitting and directing it to where it is required. The sophisticated optical design of Menlo³ achieves light output ratios as high as 86% and luminaire efficacy up to 62 luminaire lumens per circuit watt (lm/W). These efficiencies result in fewer fittings to light the space, using less raw materials and resources and reducing installation and operating costs.

We then add highly efficient electronics and lighting management technology. Moving from conventional magnetic technology to electronic ballasts and T16 lamps can give an energy reduction of up to 40%. Menlo³ offers DSI or DALI dimmable gear as standard, which when linked with presence and daylight detection can achieve energy savings over 70% (Source: CELMA).

Innovation in product design is matched with equally innovative manufacturing techniques such as deep drawing the shallow 70mm depth body and producing the mini-vane louvre in one piece. All of this contributes to reduced materials, wastage, energy use and CO2 emissions for a truly sustainable luminaire.

The EU Directive on the Energy Performance of Buildings (EPB) contains a range of provisions aimed at improving energy performance of residential and non-residential buildings.

Although the EPBD must be implemented by each EU Member State, the method of implementation is up to individual countries, such as the Part L of the UK Building Regulations.

Approved Document Part L requires that for office, industrial and storage areas luminaire performance shall be at least 55 luminaire lm/W and other types of spaces require a performance of at least 55 lamp lumens per circuit watt.

Menlo3 ensures future proofing of design by most of the variants exceeding 55 luminaire lm/W and all variants exceeding 55 lamp lumens per circuit watt.

Furthermore with the inclusion into Part L2A of the controls factor already used in Part L2B, all Menlo3 luminaires will comply with Part L requirements when used in conjunction with lighting controls.

www.suntrade.co

m.ua

Recessed Semi-Recessed Surface Circular

Louvre Diffuser MPT Louvre Diffuser MPT Louvre Diffuser MPT Diffuser

Luminance Limit Required 1x55W 2x24W 1x55W 2x24W 1x55W 2x24W 1x55W 2x24W 1x55W 2x24W 1x55W 2x24W 1x54W 1x54W 1x54W 4x14W LED

<1000 cd/m2

<1500 cd/m2

<2000 cd/m2

<3000 cd/m2

Glare options

5

EfficiencyTruly ‘efficient’ lighting not only reduces direct energy consumption but also minimises wasted light and resources and addresses the broader concerns of sustainability and environmental impact. Menlo³’s highly efficient photometric performance is achieved via a product design that minimises material usage and reduces installation time and effort.

ComfortThe ‘Comfort’ component of PEC addresses the physiological and psychological needs of people and recognises the proven role of light in influencing mood, stimulation and wellness, very important in offices where an individual worker can spend over 1800hrs per year. Menlo³’s light quality and unique styling gives designers the freedom to create visually stimulating and inspiring office spaces.

High-tech lighting for the high-tech officeThe ubiquitous computer screen, the LCD or Plasma display screens seen in meeting rooms and receptions areas, and other hand-held gadgets: all require sensitive lighting to prevent reflections from obscuring information, especially those with high gloss finishes. A key requirement is the control of surface brightness on light fittings within the field of view of the display screen.

Menlo³ uses precision optics and state of the art diffusing and reflecting materials to provide a range of glare control options that avoid the disability glare of luminaire reflections in all types of display screen equipment. This prevents the user from having to constantly adjust their view to see around screen reflections, thus eliminating frustration and reducing fatigue, particularly for intensive computer screen users.

Lighting Guides 3 and 7 from the Society of Light and Lighting recommend that for modern display screen technology using modern (positive polarity) software luminaires with a maximum luminance of 1500 cd/m² should be used.

These limits are expected to be increased to 3000 cd/m2 in the imminent update to ‘BS EN 12464-1: 2002 Lighting of Workplaces - Part 1: Indoor workplaces’ to reflect improvements in display screen technology, as is already the case in ISO9241-307.

Menlo3 with its selection of optical controllers provides a variety of maximum luminance values, allowing flexible design that accommodates a wide variety of DSE types and usage within an area.

www.suntrade.co

m.ua

Task light for today’s multi-taskersOffice work traditionally involved working with paper on flat horizontal desks. Now computer screens, flip charts, white boards and vertical storage systems proliferate. The various visual tasks are on differing working planes and the work which the eyes are now expected to perform is different, more complex and more demanding.

Menlo³’s photometric design embraces this modern office, where the task or person may be anywhere in the room. A broad light distribution delivers controlled and uniform horizontal illumination across the space. A strong component of vertical distribution reveals details and enables discrimination in vertical task situations, demonstrated by average levels of cylindrical illuminance of over 200 lux. An effective balance of direct and indirect diffused light from the dual component design gives excellent modelling that is neither too harsh nor too flat. This helps people and objects to be more easily discerned in a complex, noisy and fast-moving environment and facilitates face-to-face communication.

The benefits are unmistakable. If we can see the task clearly fewer er-rors are made, less time is consumed, eyestrain and fatigue are reduced, resulting in higher productivity. Menlo³ achieves this in a highly efficient way providing effective all-round illumination of the office from one highly attractive and efficient luminaire type.

PerformanceThe ‘Performance’ component of PEC addresses the visual effectiveness of the lighting scheme in performing the required task, wherever that may be. Menlo³’s comprehensive range allows schemes to be tailored to a particular task or remain flexible enough to accommodate variability.

6

BS EN 12464-1: 2002 Lighting of Workplaces - Part 1: Indoor workplaces is currently being updated and will include recommendations on cylindrical illuminance (ECyl) and modelling index (MI).

ECyl is a convenient way to measure vertical illuminance through 360° to assess all-round task visibility. By delivering Cylindrical illuminances levels of over 200 Lux we can ensure that faces or vertical task surfaces are well lit where ever they are and in which ever direction they point.

Furthermore, by ensuring a Modelling index of over 0.3 we can enhance face-to-face communication by lighting facial features clearly and pleasantly.

Menlo3 has therefore been designed to produce excellent levels of cylindrical illuminance and modelling.

www.suntrade.co

m.ua

People are our most important assetThe success of an organisation can be measured in no small part by the mood of its workforce and this in turn is influenced by their surroundings. A basic or poorly maintained work environment with utility lighting can decrease moral, increase staff turnover and is bad business sense.

Conversely, staff in a quality workplace with an ambience that inspires feel valued and are proud to be part of the organisation. Motivation intensifies, loyalty develops, productivity increases, reputation is enhanced, profits are generated.

Menlo³ is a statement of lighting excellence. Innovative optics such as mini-vane louvres and micro-prism diffusers ensure workers have a glare-free and comfortable view throughout the office. The unique twin light chamber softens and smoothes the brightness transition across the luminaire, minimising uncomfortable sharp changes in contrast. A perfect blend of direct/indirect light models faces pleasantly.

Menlo³ is also a lifestyle statement for the workplace. Its soft light and quality styling helps create a pleasant and visually interesting lit environment, from its semi-recessed or surface mounted versions that provide uplifting illumination of the ceiling and walls to the recessed version with its softly glowing light chambers that lift the ceiling brightness without breaking the ceiling line (see page 8).

EfficiencyTruly ‘efficient’ lighting not only reduces direct energy consumption but also minimises wasted light and resources and addresses the broader concerns of sustainability and environmental impact. Menlo³’s highly efficient photometric performance is achieved via a product design that minimises material usage and reduces installation time and effort.

ComfortThe ‘Comfort’ component of PEC addresses the physiological and psychological needs of people and recognises the proven role of light in influencing mood, stimulation and wellness, very important in offices where an individual worker can spend over 1800hrs per year. Menlo³’s light quality and unique styling gives designers the freedom to create visually stimulating and inspiring office spaces.

Traditional window design used ‘splayed reveals’ to soften the transition from bright daylight to the dimmer light levels within the room.

Menlo3 recognises the benefits of this technique and provides a soft luminance transition across the light fitting, softening the brightness transition from fixture to ceiling (see page 12).

7

www.suntrade.co

m.ua

8

Outstanding photometrics

Our research identified photometric excellence as the primary consideration in office luminaire selection. The sophisticated optical design of Menlo3 delivers with style and imagination and can be uniquely tailored to its environment.

Recessed 1. Primary optic: Optimised

reflector geometry and a choice of optics provide excellent direct task area illuminance and glare control

2. Highly reflective and diffuse reflector: Provides uniform illumination of light chambers

3. Unique twin light chamber: Diffuses reflected light for a soft ambient illumination with gradual brightness transition from central optic to ceiling

1

2

3

The recessed Menlo3 with its unique twin light chamber gives a bright ceiling impression while retaining clean ceiling lines. Low glare directional illuminance and diffused ambient illumination provide optimal visual effectiveness for the task and excellent facial modelling. The central optic provides optimum thermal conditions for efficient light output and uses precision internal reflectors to control light flow into the surrounding chambers. This creates a soft luminance transition across the luminaire, minimising eye strain caused by sudden changes in brightness. Discreet optical windows in the endcap allow a soft drift of light onto the ceiling to further soften the contrast between ceiling and luminaire.

A fully recessed Menlo3 Circularoffers an alternative aesthetic.

1. Minivane louvreUsing the highest reflectance aluminium, Miro Silver®, in an innovative design combines efficiency with very low luminances and minimises direct lamp view to avoid disability glare and minimise ‘eyebrow’ glare of traditional louvres.

2. Opal DiffuserHigh purity PMMA diffuser pearl material diffuses the lamp image and delivers extremely high optical efficiency for maximum light output within recommended luminance limits for modern visual display screens.

3. Micro-Prism Technology (MPT) DiffuserThe Micro-prism geometry reduces disability glare at low angles whilst minimising impact on luminaire efficiency, and combines with a diffusing pearl layer to create a highly comfortable and diffused lamp image at any viewing angle.

Optics Three optics are offered to meet the exact requirements for efficiency, glare control and aesthetics.ww

w.suntrade.co

m.ua

Overview of Photometric Performance:Recessed 2x24W T16 1x55W TC-L Amalgam*

LOR Glare Efficacy LOR Glare Efficacy

Louvre 78% 807cd/sqm 56lm/W 69% 925cd/sqm 55lm/W

Diffuser 86% 2673cd/sqm 62lm/W 77% 3313cd/sqm 61lm/W

MPT 78% 2483cd/sqm 56lm/W 73% 3141cd/sqm 58lm/W

Semi Recessed 2x24W T16 1x55W TC-L Amalgam*

LOR Glare Efficacy LOR Glare Efficacy

Louvre 80% 2075cd/sqm 58lm/W 77% 2341cd/sqm 61lm/W

Diffuser 86% 2090cd/sqm 62lm/W 78% 2522cd/sqm 62lm/W

MPT 80% 1491cd/sqm 58lm/W 73% 2152cd/sqm 58lm/W

Surface 1x54W T16

LOR Glare Efficacy

Louvre 72% 1117cd/sqm 55lm/W

Diffuser 80% 1475cd/sqm 61lm/W

MPT 74% 1742cd/sqm 57lm/W

*Amalgam lamp recommended for optimum Light Output (will be 2-3% lower with standard TC-L)

9

Semi-Recessed 1. Primary suspended

optic: Optimised reflector contour with a choice of optics blends direct ceiling illumination with excellent direct task area illuminance and glare control

2. Diffuse reflector: Provides soft indirect ambient illumination

3. Translucent light chamber: Diffuses reflected light and provides a gradual brightness transition from central optic

2

3

1

Where direct illumination of the ceiling and walls is required, the semi-recessed Menlo3 provides completely balanced illumination of all room surfaces for a truly uplifting lit environment. A blend of low glare direct illuminance and indirect illuminance delivers comfortable and even task illumination, whilst optimised internal reflectors deliver 30% of the task illuminance level on the ceiling and 50% on the walls. The discreetly suspended light chamber appears to float in space and allows 360° even ceiling illumination.

The surface mounted Menlo3 employs the same principles in analternative geometric form.

www.suntrade.co

m.ua

““

““

10

Aesthetic quality

With its soft glow and pure, clean lines Menlo³ can complement and add to the style and ambience of its surroundings

Curves are simple and pure, textures are soft, matt or satin and the overall effect exudes quality.

The 3 geometric shapes and mounting options allow the same aesthetic styling to complement the architecture and ambience of different spaces.

For subtle architectural integration the recessed version’s unique twin light chamber blends seamlessly into the ceiling line, whilst the sleek suspended optic of the semi-recessed version floats discretely beneath a very shallow coffer.

For a more striking presence the bold lines of the surface version or the unique spherical aesthetic of the circular version make a strong design statement.

www.suntrade.co

m.ua

11

Considerable attention has been paid to the construction quality and material finish of Menlo³. The unique shallow body is deep drawn in one piece from pre-painted steel to give superior strength and corner quality with no joins or sharp edges. High quality and robust cast aluminium endcaps add definition and strength to the soft curves of the diffusers.

Optics have been chosen not only for photometric performance but also a choice of appearance and lit effect. The unique mini-vane louvre design provides a precise modern alternative to conventional louvres, whilst modern micro-prism and diffuser optics provide a softer lit appearance and blurring of the lamp image.

“ “

“

“

www.suntrade.co

m.ua

12

Luminance transitionTraditional window design used ‘splayed reveals’ to soften the transition from bright daylight to the dimmer light levels within the room.

Menlo³ brings the benefits of this traditional architectural technique to the modern office. Its unique twin light chamber creates a gradual ‘luminance’ transition across the luminaire, softening the contrast from fixture to ceiling and reducing eyestrain.

www.suntrade.co

m.ua

13

www.suntrade.co

m.ua

14

Choice - range overview

www.suntrade.co

m.ua

Mounting - Semi-Recessed

Lamp options

Optics

Louvre Diffuser MPT

1X55W TC-L x x x

2X24W T16 x x x

Mounting - Surface

Lamp options

Optics

Louvre Diffuser MPT

1X54W T16 x x x

Mounting - Recessed

Lamp options

Optics

Louvre Diffuser MPT Circular

1X55W TC-L x x x

2X24W T16 x x x

4X14W T16 x

58W LED x

15

Menlo3 is available in a wide choice of optics and mounting combinations, but certain versions have been optimised for particular performance characteristics, as the following pages demonstrate with examples.

www.suntrade.co

m.ua

16

Menlo3 Recessed with louvreLow on glare, high on style

“

“

www.suntrade.co

m.ua

20.4m

15.6m

17

Provides the lowest luminance at 65° without compromising on light output or style

direct illumination with excellent lamp shielding

indirect illumination and creates ceiling brightness for an uplifting ambience

2 at the critical 65° angle) prevents veiling reflections even in glare sensitive screens

of light across the space to make it visually easier to understand

® louvre material produces high LOR,up to 78%, and luminaire efficacy, up to 56 luminaire lm/W

Recessed Menlo3 also available with diffuser orMPT optics for even higher efficiency and lamp obscurity or an alternative aesthetic.

www.suntrade.co

m.ua

18

Menlo3 Recessed with diffuserEfficiency and simplicity

“

“

www.suntrade.co

m.ua

20.4m

15.6m

19

Provides the highest light output in a pure minimal aesthetic

chamber that smoothes the brightness transition across the luminaire

direct illumination with no direct lamp view and acceptable luminance for modern matt screens (less than 3000cd/m²)

indirect illumination and creates ceiling brightness for an uplifting ambience

allows uniform room illumination from minimal luminaires with outstanding efficacy of up to 62 luminaire lm/W

and modelling for easier detection of detail in vertical tasks and face to face communication

Recessed Menlo3 also available with louvre orMPT optics for even lower glare or an alternative aesthetic.

www.suntrade.co

m.ua

“

“

20

Menlo3 Semi-Recessed with MPTPurely balanced lighting

www.suntrade.co

m.ua

20.4m

15.6m

21

Provides efficient illumination of all surfaces from one easily installed luminaire type

float in space, allowing 360° ceiling illumination with minimal shadowing

ceiling and 50% onto the walls to produce an uplifting environment

comfortable lamp image at any viewing angle with up to 80% LOR and efficacy (up to 62 luminaire lm/W)

with controlled luminance (below 1500cd/m²)

and modelling for easier detection of detail in vertical tasks and face to face communication

Semi-recessed Menlo3 also available with louvre or diffuser optics for even higher efficiency or an alternative aesthetic.

www.suntrade.co

m.ua

22

Menlo3 SurfaceStriking and sublime

“

“

www.suntrade.co

m.ua

20.4m

15.6m

23

The same lighting techniques and styling recreated in an alternative mounting method and geometry

www.suntrade.co

m.ua

24

Menlo3 CircularDare to be different

“ “

www.suntrade.co

m.ua

20.4m

15.6m

25

Takes the concept full circle for a totally alternative aesthetic

chamber subtly introduces a circular geometry into the ceiling plane for visual interest

conceal T16 linear lamps or high performing LEDs to deliver a highly efficient LOR with a uniform lit appearance

www.suntrade.co

m.ua

26

Making life easy

Easy to ControlThe demand for flexibility and energy efficiency has made lighting controls an integral part of the modern office, so Menlo3 has control options to suit all types and sizes of application.This makes it easier to create a lit environment that is performing, efficient and comfortable.

PerformanceProviding the best visual effectivenessThe ability to dim and create lighting scenes gives flexibility, ensuring that the lighting is appropriate to the task and user, wherever they may be.

EfficiencyConserving energy and effortPresence and daylight linking conserve energy by ensuring unnecessary lighting is turned off. Constant illuminance control via look down sensors can maintain the correct light level throughout the maintenance cycle, which saves the energy that conventional systems waste by initially overlighting the space

ComfortGiving people satisfaction and stimulationPersonalised light, via dimming or scene setting allows the ambience of the space to be altered to suit the user or varied over time, creating a more satisfactory and stimulating environment.

Menlo3 makes life as easy as possible for those involved in designing, specifying, realising and managing a quality office lighting scheme

Dimmable luminaire options:The Menlo3 range offers 3 types of dimmable luminaire to suit differing specifications, so that it can be used with any of Thorn’s lighting control packages:

SensaDigital SensaModular SensaLink SensaAdvanced

Description A first step to comfort and energy saving for controlling individual or a small group of luminaires with SensaDigital

For single room applications requiring scene setting, daylight and presence linking

A linked management system for larger projects requiring scene setting, daylight and presence linking and infra-red control using built-in sensors connected via a BUS

A lighting management system for larger projects and those requiring greater levels of comfort

Menlo3 with Integrated Mini-SensorHFL Option (HFS)Intelligent luminaire with discreet built-in presence/daylight/infra-red detector

Use standalone or as master luminaire controlling up to 3 HFD Menlo3 luminaires

N/A Use as master controlling up to 3 HFD Menlo3 luminaires and group via a BUS connection to other HFL luminaires

N/A

Menlo3 with dimmable DSI BallastHFD Option Controllable luminaire to be used with DSI control packages

Use as a slave luminaire controlled by HFL/HFS master

Use with compatible external sensor/controller

Use as a slave luminaire controlled by HFL master

Use with compatible external sensor/controller

Menlo3 with dimmable DALI BallastHFX Option Controllable luminaire to be used with DALI control packages

N/A Use with compatible external sensor/controller

N/A Use with compatible external sensor/controller

Menlo3 with integrated Mini Sensor Infra-red handheld controller

www.suntrade.co

m.ua

HFL HFD

HFDHFD

Open area emergency lighting has to provide sufficient light to avoid panic in an emergency or mains failure. If this feature is integrated into the chosen office luminaires, rather than using separate emergency bulkheads, this naturally improves the interior design whilst reducing installation cost and complexity.

Menlo3 is available with discreetly integrated emergency lighting from a highly efficient LED light source which makes it easy to integrate emergency lighting into the office scheme.

Easy to calculateThe Emergency LED is non-maintained, self-contained and only illuminates in an emergency. It therefore has no maintenance factor or ballast lumen factor to calculate, making it easy to calculate luminaire spacings, which are very broad due to the high lumen output. See table below.

Easy to test and maintainEmergency lighting is worthless if it’s not properly maintained. As the LED only operates in a power failure and has a very long life it provides safer, more reliable emergency lighting with no reliance on lamp replacement.

Because of its importance there are stringent legal requirements to regularly inspect, test and maintain emergency lighting, which can be costly and time consuming.

The LED E3TX emergency versions of Menlo3 incorporate SelfTest and Addressable Test functionality in a single fitting. E3TX luminaires operate as SelfTest when stand-alone and become addressable when connected to Explorer

Both options make it easy to maintain a fully functional emergency lighting scheme:

Automatic Self TestingAn intelligent diagnostic processor in the luminaire automatically tests the emergency functions at intervals compliant with European legislation. A bi-colour LED indicator on the luminaire indicates the test results, allowing easy and early detection of faults. Easy to install and requiring no additional cabling, SelfTest provides simple, cost-effective and reliable standalone automatic testing.

Addressable TestingEvery emergency luminaire is connected to an intelligent local controller that automatically tests and stores the full results. This may be an Explorer Project Controller for up to 256 emergency fittings or a standard computer

applications. This offers ultimate convenience by identifying the precise nature and location of faults and removing the need for manual testing or paperwork.

Easy emergency lighting

Group 1 Group 2

Group 3 Group 4

Maintenance Factor

BLF Mounting height

Centre to end Between centres

Trans Axial Trans Axial

Menlo3 with LED emergency

1 1 2.5 2.55 2.50 8.65 8.60

3 2.60 2.60 9.15 9.10

Menlo3 R 2x24W with standard Emergency*

0.8 0.15 2.5 2.60 2.55 6.45 6.45

3 2.90 2.85 7.20 7.20

Menlo3 R 1x55W with standard Emergency*

0.8 0.075 2.5 2.65 2.65 6.70 6.65

3 3.00 2.95 7.45 7.40

Emergency luminaire spacing comparison for 0.5 lux open area:

1.

2.

3.

*These versions are not available, data for comparison only.

27

1. SensaDigital Integrated sensor head (HFL luminaire) controlling 3 HFD slave luminaires

2. SensaLink Integrated sensor heads (HFL luminaires) controlling 3 HFD slave luminaires and linked with a BUS connection to a control interface (not available in all regions)

3. SensaModular/SensaAdvanced Lighting control system with external sensor

www.suntrade.co

m.ua

1. 2. 3.

4. 5.

6.

28

Making life easy - installation

Menlo3 has been purposely designed to make installation quicker and easier than other dual component luminaires, whether laying in or installing from below into suspended ceilings, by incorporating the following features:

1. Supplied fully assembled in one box with external connector for fast electrical connection

2. Supplied complete with unique mini-wedge suspension brackets for mounting from below

3. Brackets are fitted externally via the adjacent tile so there is no need to disassemble and reassemble the fitting

4. Lamps are easily accessed via removable central optic

5. Central optic can be conveniently suspended via retention tags

6. Supplied with protective film covering the optic to minimise cleaning at installation

www.suntrade.co

m.ua

Luminaire Menlo3 R Menlo3 SR Menlo3 C

Dimensions (mm) 597x597 597x597 597x597

Ceiling Type:

Exposed Tee Grids

15mm lay in A A A

24mm lay in A A A

15mm pull up B B B

24mm pull up B B B

Concealed Fix Grids

Armstrong Orcal 1800 D D D

Armstrong Orcal 3000 Q C C C

Armstrong Orcal 3000 S B B B

SAS 120 D D D

SAS 150 C C C

SAS Alugrid 15/08 B B B




Burgess Clip in D D D

Burgess A Bar B B B

Plasterboard Ceilings E E E

29

Ceiling compatibility

KeyA Yes - No additional fixings requiredB Yes - Mini-wedges required (supplied)C Yes - But product will sit higher than tileD Yes - but only if half spring T option availableE Yes - But Plasterboard version required

Menlo3 is compatible with most suspended ceiling systems. Please refer to the table below for a quick guide to compatibility:

It is always advisable to check ceiling and product dimensions and drawings to ensure compatibility, particularly for non-standard ceilings. For additional guidance on these or any ceiling types not listed, please contact your local representative. Please note that the maximum grid runner height is 55mm if using mini-wedge brackets. See installation sheet for details.

15mm lay-in 15mm pull-up24mm lay-in 24mm pull-up

Orcal 3000/SAS 150 SAS Alugrid Half spring T(SAS 120/Orcal 1800/Burgess Clip in)

www.suntrade.co

m.ua

MENLO3R 1X55W HF WL4 AC OP 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°180°

100200300

cd/klm ULOR: 1% DLOR: 76% LOR: 77%

MENLO3R 2X24W HF WL4 AC LV 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


MENLO3R 2X24W HF WL4 AC OP 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


415

572

597

597

597574

27

97 70

100

MENLO3R 2X24W HF WL4 AC PR 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


30

Recessed version

Lamps 24W T16 (FDH)

55W TC-L (FSD) Compact

Materials/FinishBody: Deep drawn steel pre-painted white: RAL 9010 End caps: Die-cast aluminium, powder coated silver: RAL 9006 Light Chamber/Wings: Extruded high-purity acrylic (PMMA) diffuser pearl material. Louvre: Aluminium in Satinbrite finish. Diffuser: high purity acrylic (PMMA) diffuser pearl material. MPT diffuser: Microprismatic and high purity acrylic (PMMA) diffuser pearl material.

Installation/MountingSupplied fully assembled with protective film for quick, easy and clean installation. Suitable for lay-in installation into 15mm or 24mm exposed tee ceilings. Unique ‘wedge’ brackets (included) are fitted externally via adjacent tile opening to allow pull up installation into most exposed tee or concealed grid ceilings without opening the luminaire. Alternative versions also available with internally fitted wedge brackets for pull up installation into plasterboard ceilings. Electrical connection is quick and easy via externally mounted connector on back of body. Central optic is easily removed and replaced by hand for lamp access.

StandardsDesigned and manufactured to comply with EN 60598 Emergency versions with EN 60598 2.22 Class I Electrical650° glow wire IK03IP20

SpecificationTo specify state: Recessed mounted luminaire with shallow 70mm deep drawn body for 24W T16 linear or 55W TC-L compact fluorescent lamps with unique diffusing pearl twin light chamber and central mini-vane louvre/MPT diffuser/opal diffuser for direct/indirect lighting performance. Suitable for lay-in into exposed tee grids or for pull up into concealed grids or plasterboard ceilings with unique ‘mini-wedge’ brackets and external electrical connection. Fixed output or digital dimmable control gear with 3 hour self/addressable test integral LED emergency versions and option for integral sensor head. As Thorn Menlo3 Recessed.

Louvre version Opal diffuser version MPT diffuser version

www.suntrade.co

m.ua

Ordering Guide Lamp(s) to be ordered separately

31

DescriptionIlcos Code

SocketWeight

(Kg)SAP Code

High Frequency

FSD 5.0 96534963

MENLO3R 1X55W HF WL4 AC PR 597 L0 FSD 5.3 96534964

MENLO3R 1X55W HF WL4 AC OP 597 L0 FSD 5.1 96534965

FDH 5.0 96534966

MENLO3R 2X24W HF WL4 AC PR 597 L0 FDH 5.3 96534967

MENLO3R 2X24W HF WL4 AC OP 597 L0 FDH 5.1 96534968

High Frequency Digital Dimmable DSI

FSD 5.0 96534969

MENLO3R 1X55W HFD WL6 AC PR 597 L0 FSD 5.3 96534970

MENLO3R 1X55W HFD WL6 AC OP 597 L0 FSD 5.1 96534971

FDH 5.0 96534972

MENLO3R 2X24W HFD WL6 AC PR 597 L0 FDH 5.3 96534973

MENLO3R 2X24W HFD WL6 AC OP 597 L0 FDH 5.1 96534974

High Frequency Digital Dimmable DALI

FSD 5.0 96534975

MENLO3R 1X55W HFX WL6 AC PR 597 L0 FSD 5.3 96534976

MENLO3R 1X55W HFX WL6 AC OP 597 L0 FSD 5.1 96534977

FDH 5.0 96534978

MENLO3R 2X24W HFX WL6 AC PR 597 L0 FDH 5.3 96534979

MENLO3R 2X24W HFX WL6 AC OP 597 L0 FDH 5.1 96534980

High Frequency LED Emergency

FSD 5.2 96534981

MENLO3R 1X55W HF E3TX WL4 AC PR 597 L0 FSD 5.5 96534982

MENLO3R 1X55W HF E3TX WL4 AC OP 597 L0 FSD 5.3 96534983

FDH 5.2 96534984

MENLO3R 2X24W HF E3TX WL4 AC PR 597 L0 FDH 5.5 96534985

MENLO3R 2X24W HF E3TX WL4 AC OP 597 L0 FDH 5.3 96534986

High Frequency Digital Dimmable DSI LED Emergency

FSD 5.2 96534987

MENLO3R 1X55W HFD E3TX WL6 AC PR 597 L0 FSD 5.5 96534988

MENLO3R 1X55W HFD E3TX WL6 AC OP 597 L0 FSD 5.3 96534989

FDH 5.2 96534990

MENLO3R 2X24W HFD E3TX WL6 AC PR 597 L0 FDH 5.5 96534991

MENLO3R 2X24W HFD E3TX WL6 AC OP 597 L0 FDH 5.3 96534992

High Frequency Digital Dimmable DALI LED Emergency

FSD 5.2 96534993

MENLO3R 1X55W HFX E3TX WL6 AC PR 597 L0 FSD 5.5 96534994

MENLO3R 1X55W HFX E3TX WL6 AC OP 597 L0 FSD 5.3 96534995

FDH 5.2 96534996

MENLO3R 2X24W HFX E3TX WL6 AC PR 597 L0 FDH 5.5 96534997

MENLO3R 2X24W HFX E3TX WL6 AC OP 597 L0 FDH 5.3 96534998

HF - High Frequency, HFD - High Frequency Digital Dimmable DSI, HFX - High Frequency Digital Dimmable DALI,

Polycarbonate TP(a) versions and plasterboard ceiling versions also available on request.

www.suntrade.co

m.ua

MENLO3SR 2x24W HF WL4 AC OP 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


MENLO3SR 2X24W HF WL4 AC PR 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


MENLO3SR 2X24W HF WL4 AC LV 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


MENLO3SR 1X55W HF WL4 AC LV 597 L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

60120180


597574

415

100

70

93

572

163

597

597

32

Semi-recessed version

Lamps 24W T16 (FDH) Linear

55W TC-L (FSD) Compact

Materials/FinishBody: Deep drawn steel pre-painted white: RAL 9010 End caps: Die-cast aluminium, powder coated silver: RAL 9006 Light Chamber/Wings: Extruded high-purity acrylic (PMMA) diffuser pearl material. Louvre: Aluminium in satinbrite finish. Diffuser: high purity acrylic (PMMA) diffuser pearl material. MPT diffuser: Microprismatic and high purity acrylic (PMMA) diffuser pearl material. Suspension arms: Injection - moulded silver polycarbonate

Installation/MountingSupplied fully assembled with protective film for quick, easy and clean installation. Suitable for lay-in installation into 15mm or 24mm exposed tee ceilings. Unique ‘wedge’ brackets (included) are fitted externally via adjacent tile opening to allow pull up installation into most exposed tee or concealed grid ceilings without opening the luminaire. Alternative versions also available with internally fitted wedge brackets for pull up installation into plasterboard ceilings. Electrical connection is quick and easy via externally mounted connector on back of body. Central optic is easily removed and replaced by hand for lamp access.

StandardsDesigned and manufactured to comply with EN 60598Emergency versions with EN 60598 2.22 Class I Electrical650° glow wireIK03IP20

SpecificationTo specify state: Recessed mounted luminaire with shallow 70mm deep drawn body for 24W T16 linear or 55W TC-L compact fluorescent lamps with 90mm suspended diffuser pearl optic and central mini-vane louvre/MPT diffuser/opal diffuser for direct/indirect lighting performance that delivers 50% of horizontal working plane illuminance on walls and 30% on ceilings. Suitable for lay-in into exposed tee grids or for pull up into concealed grids or plasterboard ceilings with unique “mini-wedge” brackets and external electrical connection. Fixed output or digital dimmable control gear with 3 hour self/addressable test integral LED emergency versions and option for integral sensor head. As Thorn Menlo3 Semi-recessed.


www.suntrade.co

m.ua

Ordering Guide Lamp(s) to be ordered separatelyDescription Ilcos Code Socket Weight (Kg) SAP Code

High Frequency

FSD 5.0 96534999

MENLO3SR 1X55W HF WL4 AC PR 597 L0 FSD 5.3 96535000

MENLO3SR 1X55W HF WL4 AC OP 597 L0 FSD 5.1 96535001

FDH 5.0 96535002

MENLO3SR 2X24W HF WL4 AC PR 597 L0 FDH 5.3 96535003

MENLO3SR 2X24W HF WL4 AC OP 597 L0 FDH 5.1 96535004


FSD 5.0 96535005

MENLO3SR 1X55W HFD WL6 AC PR 597 L0 FSD 5.3 96535006

MENLO3SR 1X55W HFD WL6 AC OP 597 L0 FSD 5.1 96535007

FDH 5.0 96535008

MENLO3SR 2X24W HFD WL6 AC PR 597 L0 FDH 5.3 96535009

MENLO3SR 2X24W HFD WL6 AC OP 597 L0 FDH 5.1 96535010


FSD 5.0 96535011

MENLO3SR 1X55W HFX WL6 AC PR 597 L0 FSD 5.3 96535012

MENLO3SR 1X55W HFX WL6 AC OP 597 L0 FSD 5.1 96535013

FDH 5.0 96535014

MENLO3SR 2X24W HFX WL6 AC PR 597 L0 FDH 5.3 96535015

MENLO3SR 2X24W HFX WL6 AC OP 597 L0 FDH 5.1 96535016


FSD 5.2 96535017

MENLO3SR 1X55W HF E3TX WL4 AC PR 597 L0 FSD 5.5 96535018

MENLO3SR 1X55W HF E3TX WL4 AC OP 597 L0 FSD 5.3 96535019

FDH 5.2 96535020

MENLO3SR 2X24W HF E3TX WL4 AC PR 597 L0 FDH 5.5 96535021

MENLO3SR 2X24W HF E3TX WL4 AC OP 597 L0 FDH 5.3 96535022


FSD 5.2 96535023

MENLO3SR 1X55W HFD E3TX WL6 AC PR 597 L0 FSD 5.5 96535024

MENLO3SR 1X55W HFD E3TX WL6 AC OP 597 L0 FSD 5.3 96535025

FDH 5.2 96535026

MENLO3SR 2X24W HFD E3TX WL6 AC PR 597 L0 FDH 5.5 96535027

MENLO3SR 2X24W HFD E3TX WL6 AC OP 597 L0 FDH 5.3 96535028


FSD 5.2 96535029

MENLO3SR 1X55W HFX E3TX WL6 AC PR 597 L0 FSD 5.5 96535030

MENLO3SR 1X55W HFX E3TX WL6 AC OP 597 L0 FSD 5.3 96535031

FDH 5.2 96535032

MENLO3SR 2X24W HFX E3TX WL6 AC PR 597 L0 FDH 5.5 96535033

MENLO3SR 2X24W HFX E3TX WL6 AC OP 597 L0 FDH 5.3 96535034

HF - High Frequency, HFD - High Frequency Digital Dimmable DSI, HFX - High Frequency Digital Dimmable DALI,

Polycarbonate TP(a) versions and plasterboard ceiling versions also available on request.

33

www.suntrade.co

m.ua

Surface version


Materials/FinishHousing: Pre-painted sheet steel. End caps: Die-cast aluminium, powder coated silver: RAL 9006 Light Chamber/Wings: Extruded high-purity acrylic (PMMA) diffuser pearl material. Louvre: Aluminium in satinbrite finish. Diffuser: high purity acrylic (PMMA) diffuser pearl material. MPT diffuser: Microprismatic and high purity acrylic (PMMA) diffuser pearl material.

Installation/MountingSuitable for surface mounting onto solid ceiling. Optic and light chamber are removed using turnbuckles to allow gear tray to be fixed to ceiling via 2 screw fastenings. Electrical connection to be made via terminal block before reattaching light chamber and optic. Central optic is easily removed and replaced by hand for lamp access.Can also be integrated into 300X1200mm suspended ceiling grids using suspended mounting kit (to be ordered separately).

StandardsDesigned and manufactured to comply with EN 60598Emergency versions with EN 60598 2.22 Class I Electrical650° glow wireIK03 IP20

SpecificationTo specify state: Surface mounted luminaire for 54W T16 linear fluorescent lamps with diffusing pearl light chamber and wings and central mini-vane louvre/MPT diffuser/opal diffuser for direct/indirect lighting performance. Suitable for surface mounting onto solid ceilings or integrating into suspended ceiling grids using optional accessories. Fixed output or digital dimmable control gear with 3 hour self/addressable test integral LED emergency versions and option for integral sensor head.As Thorn Menlo3 Surface.

MENLO3S 1X54W HF AC LV L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

60120180


MENLO3S 1x54W HF AC OP L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


MENLO3S 1X54W HF AC PR L0

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


415

1184

1229

103

320

100

Ordering Guide Lamp(s) to be ordered separately

Description Ilcos Code SocketWeight

(Kg)SAP Code

High Frequency

FDH 7.0 96238973

MENLO3S 1X54W HF AC PR L0 FDH 7.6 96238974

MENLO3S 1X54W HF AC OP L0 FDH 7.3 96238975


FDH 7.0 96238976

MENLO3S 1X54W HFD AC PR L0 FDH 7.6 96238977

MENLO3S 1X54W HFD AC OP L0 FDH 7.3 96238978


FDH 7 96238979

MENLO3S 1X54W HFX AC PR L0 FDH 7.6 96238980

MENLO3S 1X54W HFX AC OP L0 FDH 7.3 96238981


FDH 7.2 96238982

MENLO3S 1X54W HF E3TX AC PR L0 FDH 7.6 96238983

MENLO3S 1X54W HF E3TX AC OP L0 FDH 7.5 96238984


FDH 7.2 96238985

MENLO3S 1X54W HFD E3TX AC PR L0 FDH 7.6 96238986

MENLO3S 1X54W HFD E3TX AC OP L0 FDH 7.5 96238987


FDH 7.2 96238988

MENLO3S 1X54W HFX E3TX AC PR L0 FDH 7.6 96238989

MENLO3S 1X54W HFX E3TX AC OP L0 FDH 7.5 96238990

Accessory

96239180

HF - High Frequency, HFX - High Frequency Digital Dimmable DALI, E3TX - 3 Hour SelfTest or

PR - Micro-prism diffuser, OP - Opal diffuser

Polycarbonate TP(a) versions also available on request.

34


www.suntrade.co

m.ua

Circular recessed version


58W LED (3500K)

Materials/FinishBody: White pre-painted steel. Light Chamber/circular diffuser:

polycarbonate.

Installation/MountingSupplied fully assembled with protective film for quick, easy and clean installation. Suitable for lay-in installation into 15mm or 24mm exposed tee ceilings. Unique ‘wedge’ brackets (included) are fitted externally via adjacent tile opening to allow pull up installation into most exposed tee or concealed grid ceilings without opening the luminaire. Alternative versions also available with internally fitted wedge brackets for pull up installation into plasterboard ceilings. Electrical connection is quick and easy via externally mounted connector on back of body. Optic is easily removed and replaced by hand for lamp access. LED version suitable for lay-in only.

StandardsDesigned and manufactured to comply with EN 60598Emergency versions with EN 60598 2.22 Class I Electrical850° glow wireIK03IP20

SpecificationT16 versions:To specify state: Recessed mounted luminaire for 14W T16 linear fluorescent lamps with unique ‘floating’ circular diffuser and light chamber. Suitable for lay-in into exposed tee grids or for pull up into concealed grids or plasterboard ceilings with unique ‘mini-wedge’ brackets and external electrical connection. Fixed output or digital dimmable control gear with 3 hour self/addressable test integral LED emergency versions and option for integral sensor head. LED version:To specify state: Recessed mounted luminaire for 58W LED light source with unique ‘floating’ circular diffuser and light chamber. Suitable for lay-in into exposed tee grids with external electrical connection. Analogue dimmable control gear.As Thorn Menlo3 Circular.

MENLO3C 4X14W T16 HF WL4 L000

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


HF - High Frequency, HFD - High Frequency Digital Dimmable DSI, HFX - High Frequency Digital Dimmable DALI, HFA - High Frequency Analogue Dimmable, E3TX - 3 Hour SelfTest or Addressable Test LED Emergency,

Plasterboard ceiling versions also available on request for T16 version.

Ordering Guide Lamp(s) to be ordered separately except LED version.*This version will be available August 2010.

Description Ilcos Code Socket

Weight (Kg)

SAP Code

High Frequency

MENLO3C 4X14W T16 HF WL4 L000 FDH 4.6 96239170


MENLO3C 4X14W T16 HFD WL6 L000 FDH 4.7 96239171


MENLO3C 4X14W T16 HFX WL6 L000 FDH 4.7 96239172


MENLO3C 4X14W T16 HF WL4 E3TX L000 FDH 4.8 96239173


MENLO3C 4X14W T16 HFD WL6 E3TX L000 FDH 4.9 96239174


MENLO3C 4X14W T16 HFX WL6 E3TX L000 FDH 4.9 96239175

LED version

MENLO3C LED 1X58W HFA WL3 8.7 96239179

Provisional data Provisional data

203 17791

446

597

597

LED version

MENLO3C LED 1X58W HFA WL3

30°30°

60°60°

90° 90°

°021°021

150° 150°

180°

100200300


146 117 91

446

597

597

T16 version only

35

www.suntrade.co

m.ua



Publication No: 450 (IS) Publication Date: 06/10 www.pefc.org





















Thorn Gulf LLC Al Shoala Building, Office 301/2, Block E, Airport road, P.O. Box 22672, Deira, Dubai, UAE Tel: (971) 4 2948938 Fax: (971) 4 2948838 E-mail: [email protected] Website: www.thornlighting.com



www.thornlighting.comwww.suntrade.co

m.ua

Documents

Thorn 2012