This slide deck is for LPI Academy instructors to use for lectures for LPI Academy courses. ©Copyright Network Development Group 2013. Module 8 Pipes,

This slide deck is for LPI Academy instructors to use for lectures for LPI Academy courses.

©Copyright Network Development Group 2013.

Module 8Pipes, Redirection and REGEX



Exam Objective3.2 Searching and Extracting Data from Files

Objective Summary– Piping and redirection– Partial POSIX



Command Line and Redirection



Command Line Pipes

• The pipe character ( | ) can be used between two commands to send the output of the first as input to the second:– ls /etc | head

• The output of ls /etc is sent to head as input.



Command Line Pipelines

• Multiple commands can be combined to form pipelines. The order in which commands are added to the pipeline can affect the output:



I/O Redirection• Three Input/Output (I/O) streams associated with

every command:– Standard Input (STDIN) is normally provided by the user

via the keyboard.– Standard Output (STDOUT) is the output produced by the

command when operating correctly. STDOUT normally appears in the same window as where command executed.

– Standard Error (STERR) is the is the output produced by the command when an error has occurred. STDOUT normally appears in the same window as where command executed.



I/O Redirection Symbols• Summary of redirection possible with the bash shell:

– < /path/to/file (Redirect STDIN from file)– > /path/to/file (Redirect STDOUT overwriting file)– >> /path/to/file (Redirect STDOUT appending file)– 2> /path/to/file (Redirect STDERR overwriting file)– 2>> /path/to/file (Redirect STDERR appending file)– &> /path/to/file (Redirect STDERR and STDOUT overwriting

file)– &>> /path/to/file (Redirect STDERR and STDOUT appending

file)



The null device

• The null device is represented by the /dev/null file. (Otherwise known as the “Bit Bucket”)

• This file is very useful in redirection of input and output.

• This file serves two purposes: – any output redirected to /dev/null is discarded.– /dev/null can be used for input to provide a stream of

null values.



STDIN, STDOUT, and STDERR



STDIN or 0• Standard Input (STDIN) normally is provided by the

keyboard but can be redirected with the < symbol. • STDIN can be read by programs to get data for them

to process. • To signal a program that you wish to stop providing

data by the keyboard via STDIN, type CTRL-D. • The tr command reads its data from STDIN. It

translates from one set of characters to another. • If you were the user typing the data to be translated

by the tr command, you would type CTRL-D when finished.



STDIN from keyboard

• In the following example, the tr command translates from lowercase to uppercase after the user typed the command and pressed Enter.

• Then, "alpha" was typed and Enter pressed. Finally, the user typed CTRL-D.



Redirecting STDIN from file

• The tr command translates from lowercase to uppercase with STDIN being redirected from the /etc/hosts file:



STDOUT or 1

• Standard Out (STDOUT) is the output from the command when operating correctly.

• It is usually displayed in the same window where the command is executed.

• The echo command is used to print messages to STDOUT.

• It can be used to demonstrate how STDOUT can be redirected, as shown on the following slide.



Redirecting STDOUT• In the example below, the echo Linux 1

command is executed and the output appears on STDOUT.

• Then, the echo Linux 1 > a.txt command redirects the output to the file a.txt.

• Finally, the command cat a.txt sends the file contents to STDOUT, so the output is shown.



Appending STDOUT redirection

• Using a single arrow > for STDOUT redirection will clobber, or overwrite, the file specified.

• Using the double arrow >> for STDOUT redirection will either create a new file or append an existing one:



STDERR or 2

• Standard Error (STDERR) is the output of a command after an error has occurred.

• It is normally sent to the console/terminal where the command is executed.

• ls /fake is a command that will cause an error to be output to STDERR because the /fake file does not exist.



Redirecting STDERR

• ls /fake 2> /tmp/err.msg is a command that would cause an error to be sent to STDERR which is then redirected to the /tmp/err.msg file.

• The cat /tmp/err.msg command sends the contents of the file to STDOUT to display the file:



Disposing of STDERR

• ls /fake 2> /dev/null is a command that would cause STDERR to be redirected to the /dev/null file, in effect disposing of the error message.

• Notice cat /dev/null displays no visible output.



Working with STDERR and STDOUT

• find is a command that searches the filesystem. • It sends output to STDOUT when it successfully

locates a file that matches your criteria. • It sends output to STDERR when it fails to access a

directory. • The find command will be used to demonstrate

redirecting both STDOUT and STDERR on the following slides.

• More detail about the find command appears later in this chapter.



STDERR and STDOUT Example

• The following example demonstrates the find command searching recursively the /etc/pki directory for any files matching "*.crt".

• Two lines of STDERR and two lines of STDOUT messages appear:



Isolating STDERR

• In the next example, the STDOUT output is redirected to the /dev/null file, so the STDERR output alone is sent to the terminal window:



Isolating STDOUT

• In the next example, the STDERR output is now redirected to /dev/null file, so the STDOUT output alone is sent to the terminal window:



Redirecting Multiple Streams Separately

• In the next example, the STDERR output is sent to the crt.err file and the STDOUT output is sent to the crt.txt file:



Redirecting Multiple Streams Combined

• In this example, both STDOUT and STERR are redirected into the same file, crt.all:



find Command



Searching with find command

• The filesystem has hundreds of directories with thousands of files making finding files challenging.

• The find command is a powerful tool to be able to search for files in different ways including:– name– size– date– ownership



Syntax of find command

• The find command has the following syntax:– find [start_dir] [search_op] [criteria] [result]

• If the starting directory (start_dir) is not specified, then the current directory is assumed.

• The search option (search_op) is how the search will be done. For example, use the -name option to search by name.



Syntax of find command (cont'd)

• The search criteria (criteria) is the data to be used with the search option. So, if the search option was -name, then the search criteria would be the name of the file to find.

• The result option (result) defaults to -print, which will output the names of the files that are found. Other result options can perform actions on the files that are found.



Searching by file name

• Consider the following command: find /etc/pki -name "*.crt"

• Begins searching recursively from the /etc/pki directory

• Output any file names that match "*.crt" (anything that ends in ".crt“).



Displaying file detail

• The option -ls will create output similar to the ls -l command. (show both)

• The columns output are: inode, blocks used, permissions, link count, user owner, group owner, size, date/time, and file name.



Searching by file size

• The -size option can be used by find to search by its size.

• Large units can be specified as K, M, G, etc.• Using +1M means more than one megabyte.• Using -1M means less than one megabyte.



Useful options for find commandOption Example Meaning

-maxdepth -maxdepth 1 Only search specified directory and its immediate subdirectories

-group -group payroll Find any files owned by the payroll group

-iname -iname hosts Case insensitive search by filename

-mmin -mmin -10 Find any files modified in the last ten minutes or less

-type -type f Find only regular files

-user -user bob Find any files owned by the user bob



less Command



Viewing files with less command

• The less command is a pager command designed to display only one page of data at a time.

• The more command is another pager command that has less features than the less command.

• Both commands allow the user to move back and forth with movement commands to view one page at a time.



The help screen in less• Once in the less program, pressing the "h" key will

display the help screen:



less movement commands

• As seen in the help screen, the less command has many movement commands. The most common commands are:

Movement Key

Window forward Spacebar

Window backward b

Line forward Enter

Exit q

Help h



less searching commands

• Type / to search from cursor to end of file.• Type ? to search from cursor to beginning of file.• Type pattern to search and press Enter.• If more than one match found, press n to go to next

match or N to go to previous match.



head or tail



Filtering with head

• The head command displays the first ten lines of a file by default.

• The -n option allows for the number of lines to be displayed to be specified.



head with negative lines• Normally the head command displays the number

of lines specified from the top of the file.• Using -n with a negative value, indicates how many

lines from the bottom to not show.• This example shows all lines from /etc/passwd

except the last thirty-two.



Filtering with tail

• The tail command displays the last ten lines of a file by default.

• The -n option allows for the number of lines to be displayed to be specified:



tail with positive lines

• If the -n option specifies the number of lines to be displayed with a plus ( + ) prefix, then the tail command interprets that to mean to display from that line number to the end of the file:



Following with tail

• The tail command is able to monitor changes a file and print them out as they occur by using -f option.

• System administrators frequently follow log files in order to troubleshoot system problems.

• The user must terminate the tail command when following with the –f option by using CTRL-C.



sort Command



Sorting files or input

• The sort command will rearrange its output lines according to one or more fields you specify for sorting.

• Fields are separated by whitespace, although with the –t option, you can specify the delimiter.

• The default sort is in ascending order, but you can use the -r option to reverse the sorting of a field.

• The default sort is a dictionary sort, but you can use the -n option to make it a numeric sort.



Example of sort

• In the following example, the /etc/passwd file is sorted using a : character as a delimiter, by the fourth field numerically and then the third field numerically in reverse:



File Statistics



File statistics with wc command

• The wc command outputs up to three statistics for each file it is given as an argument.

• By default, wc displays the lines, words and bytes contained in each file.

• If provided more than one file, then it also calculates the totals of all files.

• To view individual statistics, specify -l for lines, -w for words or -c for bytes.



Example of wc command

• To analyze the number of lines, words and bytes in the /etc/passwd and /etc/passwd- files, the following wc command could be executed:



Using wc with pipes

• The wc command is often used with pipes so that the output of a command can be analyzed.

• Using wc -l as the final command in the pipe will count how many lines of output was produced.

• For example, to determine how many files and directories are in the /etc directory, you could execute: ls /etc | wc -l



cut Command



Filtering with cut command

• If you want to extract columns of text, then the cut command provides two simple techniques:– By delimiter, where whitespace is the default. The -d

option can let you specify other delimiters and -f is used to indicate which fields to extract.

– By character position, using the -c option with the range of the column to extract.



Example of cut command

• The /etc/passwd file is delimited by colon with these fields: account:password:UID:GID:GECOS:directory:shell

• To extract the first, and fifth through seventh fields:cut –d: -f1,5-7 /etc/passwd



grep Command



Filtering with grep command

• The grep command can be used to filter standard input or the contents of a file for lines matching a specified pattern.

• If you want to see where a pattern, or perhaps a word, appears within a file, then the grep command is useful for that purpose.



Common grep optionsOption Purpose

--color Color the matches found

-v Reverse (negate) matches

-c Count matches

-n Number matching lines

-l List matching files

-i Match case insensitive

-w Match pattern as a word



Basic Regular Expressions



Basic Regular Expressions

• Basic Regular Expressions (BRE) are able to be used with the grep command without requiring an option to use them (unlike Extended Regular Expression show later).

• The simplest regular expressions are just alphabetic or numeric characters that match themselves.

• The backslash \ can be used to escape the meaning of regular expression meta-characters, including the backslash itself.



BRE: the . example

• The . (period) character matches exactly one character.

• The example below shows the grep command matching the 'a' followed by two characters.

• The results show it matched 'abc'.



BRE: the [ ] example

• The [ ] (brackets) characters are used to match exactly one character.

• The characters can be listed or given as a range.• If the first character listed is ^ (caret), then it means

not the characters bracketed.



BRE: the * example

• The * (asterisk) character will match zero or more of the previous character.

• Matching "a*" is not very useful because it might match zero a's (matches every line).

• Matching "abcd*" would be more useful, since you would need an "abc" followed by zero or more d's.



BRE: the ^ example

• The ^ (caret) character, when appearing at the beginning of the pattern, means that pattern must appear at the beginning of the line.

• The ^ not at the beginning of a pattern matches itself.



BRE: the $ example

• The $ (dollar sign), when appearing at the end of the pattern, means that pattern must appear at the end of the line.

• The $ not at the beginning of a pattern matches itself.



BRE: Combining ^ and $

• Combining both the ^ and $ characters allows for two special matches:– '^$' is a blank line match. – '^pattern$ matches if the whole line contains only the

"pattern“.



Extended Regular Expressions



Extended Regular Expressions

• The use of Extended Regular Expressions (ERE) requires the -E option when using the grep command.

• Extended Regular Expressions can be combined with Basic Regular Expressions.

• The following are ERE characters: ?, +, and |



ERE: the + example

• The + (plus) character will match one or more of the previous character.

• Matching "a+" is useful because it can match one or more a's, ensuring only lines that have at least one “a” are matched.



ERE: the ? example

• The ? (question mark) character will optionally match one of the previous character.

• The ? character is useful for matching characters that only occasionally appear in a word. The following example illustrates this:



ERE: the | example

• The | (vertical bar) character will act like an “or” operator between two regular expressions.

• This alternation operator is useful to be able to match multiple patterns:



The xargs command

• The xargs command helps complex piped command sets execute more efficiently

• It attempts to build the longest command line possible with as many arguments as possible

• It tries to prevent executing the command each time for every argument

Documents

This slide deck is for LPI Academy instructors to use for lectures for LPI Academy courses. ©Copyright Network Development Group 2013. Module 8 Pipes,