Embed Size (px)
Citation preview
TFM 12 TFM 12 (Trickling Fill Media – 12 mm)
is a structured fill media obtained by the assembly of PVC
thermoformed sheets.
Design
The thermoformed profile is 12 mm in height.
The sheets have a crossed type design, with 60° inclined
flutes with respect to the horizon, which present a inlet
section of 24 mm (12 + 12 mm).
The PVC thermoformed sheets can be made of different
thicknesses in order to adapt the block mechanical
characteristics to the specific application needs.
Principal applications:
The TFM 12 honeycomb structure and its high specific surface allow this product to find a wide use in
many applications among with:
Fill media for waste water treatment, such as trickling filters and compact systems
Coalescing media for the oil and hydrocarbons separation
Fill media for evaporative cooling towers
Fill media for gases and fumes abatement columns , like wet scrubbers and stripping columns
Panel filters used for the interception of drops or wet dusts, a san instance in painting cabins and ornamental
stones working stations.
PVC Characteristics:
The PVC used to make this fill media comply with the most restrictive standards, such as the CTI rule 136 and
the ASTM E-84, presenting many advantages:
Lightness, which allows an easy handling;
Self-extinguishing and fire resistant (ASTM E-84);
High mechanical resistance, in particular to compression;
Resistance to the majority of chemicals and to the biological aggression;
It is an hydrophilic material, this is why water forms a well distributed liquid film while flowing on it.
Working Temperature
Standard High Temperature Low Temperature
-5°C ÷ 60°C -5°C ÷ 75°C - 40°C ÷ 60°C
Available Sizes
Sheets sizes depend on the mould size and from the possibilities
given by our thermoforming machines.
On request we can supply cut to size blocks.
TFM 12 can be supplied both in pre-assembled blocks and sheets to be assembled on site.
The latter option allow to optimize the freight volume and consequently to reduce the transport costs.
The assembly process can be chemical, using a solvent glue, which doesn’t leave any residual in the
finished product, or thermal, by welding.
Refill-tech can supply the suitable machines to make these operations.
Standard Block Sizes: L x B x H
1200 x 300 x 300 mm 1800 x 300 x 300 mm 2400 x 300 x 300 mm
1200 x 300 x 600 mm 1800 x 300 x 600 mm 2400 x 300 x 600 mm
1200 x 600 x 600 mm 1800 x 600 x 600 mm 2400 x 600 x 600 mm
Standard Sheet Sizes: L x H
1200 x 300 mm 1800 x 300 mm 2400 x 300 mm
1200 x 600 mm 1800 x 600 mm 2400 x 600 mm
Specific
Surface
Thermoformed
Profile Height
Standard
Sheet
Thickness
Void Index Material
245 m²/m³ 12 mm 250 micron 97 % PVC
Refill-Tech S.r.l. Via Dei Tigli 8 - 20046 Biassono (MB) Tel. +39 039/2450122 - +39 039/5788021 Fax. +39 039/5788032 [email protected] - www.refill-tech.it
TFM 19 TFM 19 (Trickling Fill Media – 19 mm)
is a structured fill media obtained by the assembly of PVC
thermoformed sheets.
Design
The thermoformed profile is 19 mm in height.
The sheets have a crossed type design, with 60° inclined
flutes with respect to the horizon, which present a inlet
section of 38 mm (19 + 19 mm).
The PVC thermoformed sheets can be made of
different thicknesses in order to adapt the block mechanical
characteristics to the specific application needs.
Principal applications:
The TFM 19 honeycomb structure and its high specific surface allow this product to find a wide use in many
applications among with:
Fill media for waste water treatment, such as trickling filters and compact systems
Coalescing media for the oil and hydrocarbons separation
Fill media for evaporative cooling towers
Fill media for gases and fumes abatement columns , like wet scrubbers and stripping columns
Panel filters used for the interception of drops or wet dusts, a san instance in painting cabins and ornamental
stones working stations.
PVC Characteristics:
The PVC used to make this fill media comply with the most restrictive standards, such as the CTI rule 136 and
the ASTM E-84, presenting many advantages:
Lightness, which allows an easy handling;
Self-extinguishing and fire resistant (ASTM E-84);
High mechanical resistance, in particular to compression;
Resistance to the majority of chemicals and to the biological aggression;
It is an hydrophilic material, this is why water forms a well distributed liquid film while flowing on it.
Working Temperature
Standard High Temperature Low Temperature
-5°C ÷ 60°C -5°C ÷ 75°C - 40°C ÷ 60°C
Available Sizes
Sheets sizes depend on the mould size and from the possibilities
given by our thermoforming machines.
On request we can supply cut to size blocks.
TFM 19 can be supplied both in pre-assembled blocks and sheets to be assembled on site.
The latter option allow to optimize the freight volume and consequently to reduce the transport costs.
The assembly process can be chemical, using a solvent glue, which doesn’t leave any residual in the finished
product, or thermal, by welding.
Refill can supply the suitable machines to make these operations.
Standard Block Sizes: L x B x H
1200 x 300 x 300 mm 1800 x 300 x 300 mm 2400 x 300 x 300 mm
1200 x 300 x 600 mm 1800 x 300 x 600 mm 2400 x 300 x 600 mm
1200 x 600 x 600 mm 1800 x 600 x 600 mm 2400 x 600 x 600 mm
Standard Sheet Sizes: L x H
1200 x 300 mm 1800 x 300 mm 2400 x 300 mm
1200 x 600 mm 1800 x 600 mm 2400 x 600 mm
Specific
Surface
Thermoformed
Profile Height
Standard
Sheet
Thickness
Void Index Material
165 m²/m³ 19 mm 260 micron 98 % PVC
Refill-Tech S.r.l. Via Dei Tigli 8 - 20046 Biassono (MB) Tel. +39 039/2450122 - +39 039/5788021 Fax. +39 039/5788032 [email protected] - www.refill-tech.it
LSM 40 LSM 40 (Lamella Settler Module 40 mm)
is a lamella pack obtained by the assembly of PVC thermoformed
sheets with a parallel channel design.
This product is also available in a crossed channel design ( please
refer to TFM 27 data sheet)
Design
The product has been studied to maximize the projected surface
without limiting the wastewater free passage.
The channels have a arrow shape in order to allow the best solid
Flow.
LSM lamella pack can be made of different sizes.
Furthermore it is possible to cut them to size: all these customization possibilities make the product easy to adapt to
any kind of plant or basin, including circular ones.
All these customization possibilities make this product easily adaptable to any type of plant or basin, including the
older Dortmund Clarifiers.
The structure is self-supporting, so it is not necessary to use metal frames.
Principal Applications:
The channels sizes and the considerable projected surface allow this product to find a wide use in many applications
in wastewater treatment, among with :
primary and secondary clarifiers (settlers) in wastewater treatment plants;
clariflocculation;
oil and water separation systems;
PVC Characteristics:
The PVC used to make this fill media comply with the most restrictive standards, such as the CTI rule 136 and the
ASTM E-84, presenting many advantages:
Lightness, which allows an easy handling;
Self-extinguishing and fire resistant (ASTM E-84);
High mechanical resistance, in particular to compression;
Resistance to the majority of chemicals and to the biological aggression;
It is an hydrophilic material, this is why water forms a well distributed liquid film while flowing on it.
Material Colour Standard Thickness Range Working Temperature
Range
PVC Black 450-700 micron -5°C ÷ 60°C
LSM 50 LSM 50 (Lamella Settler Module 50 mm)
is a lamella pack obtained by the assembly of PS
thermoformed plates.
Design
The product has been studied to maximize the
projected surface without limiting the wastewater
free passage. The channels have a arrow shape in
order to allow the best solid flow.
LSM lamella pack can be made of different sizes and
inclinations.
Furthermore it is possible to cut them to size: all these customization possibilities make the product easy to adapt to
any kind of plant or basin, including circular ones.
The structure is self-supporting, so it is not necessary to use metal frames. Anyhow we suggest to use them
whenever you wish to simplify the maintenance and installation operations.
Principal Applications:
The channels sizes and the considerable projected surface allow this product to find a wide use in many applications
in wastewater treatment, among with :
primary and secondary clarifiers (settlers) in wastewater treatment plants;
clariflocculation;
oil and water separation systems;
settlers in potabilizer plant.
PS Characteristics
The PS used to make this lamella settler module comply with the most restrictive standards, presenting
many advantages:
Lightness, which allows an easy handling;
High mechanical resistance;
Resistance to the majority of chemicals and to the biological aggression;
On demand the product can be supplied in virgin PS, which is compatible with drinking water applications.
Material colour Standard Thickness Working
Temperature Range
PS or
PS for drinking water carbon black 1,2 mm -5°C ÷ 80°C
Formats
Sheets sizes depend on the mould size and from the possibilities given by our thermoforming machines.
On request we can supply cut to size blocks.
can be supplied both in pre-assembled blocks and sheets to be assembled on site.
The latter option allow to optimize the freight volume and consequently to reduce the transport costs.
The assembly process can be chemical, using a solvent glue, which doesn’t leave any residual in the finished
product, or thermal, by welding.
Refill-tech can supply the suitable machines to make these operations.
Metal Frames for lifting and bounding:
To simplify maintenance and installation operations, as well
as to give a stronger structure to the blocks, Refill-tech can
supply made to size metal frames in AISI 304, AISI 316L and
galvanized sheet, suitably shaped and equipped with lifting
hooks.
Refill-Tech S.r.l. Via Dei Tigli 8 - 20046 Biassono (MB) Tel. +39 039/2450122 - +39 039/5788021 Fax. +39 039/5788032 [email protected] - www.refill-tech.it
Standard Block Sizes
use width B inclination Lenght L
(without projection)
Height H
(min ÷ max)
Projected
Surface
Clarifier (Settler) 1000 mm 60° 50 mm Pitch 530 ÷ 1320 mm 14,8 m²/m³
Oil water separator 1000 mm 45° 61 mm Pitch 445 ÷ 1110 mm 20,2 m²/m³
Hiyraulic Data - 60° inclined Modules
Hydraulic
Radius
Hydraulic
Diamter
Minimum free
Passage
1,5 cm 6,0 cm 80 mm
LSM 80 LSM 80 (Lamella Settler Module 80 mm)
is a lamella pack obtained by the assembly of PS
thermoformed plates.
Design
The product has been studied to maximize the
projected surface without limiting the wastewater
free passage. The channels have a arrow shape in
order to allow the best solid flow.
LSM lamella pack can be made of different sizes and
inclinations.
Furthermore it is possible to cut them to size: all these customization possibilities make the product easy to adapt to
any kind of plant or basin, including circular ones.
The structure is self-supporting, so it is not necessary to use metal frames. Anyhow we suggest to use them
whenever you wish to simplify the maintenance and installation operations.
Principal Applications:
The channels sizes and the considerable projected surface allow this product to find a wide use in many applications
in wastewater treatment, among with :
primary and secondary clarifiers (settlers) in wastewater treatment plants;
clariflocculation;
oil and water separation systems;
settlers in potabilizer plant.
PS Characteristics
The PS used to make this lamella settler module comply with the most restrictive standards, presenting
many advantages:
Lightness, which allows an easy handling;
High mechanical resistance;
Resistance to the majority of chemicals and to the biological aggression;
On demand the product can be supplied in virgin PS, which is compatible with drinking water applications.
Material Colour Standard Thickness Working
Temperature Range
PS or
PS for drinking water carbon black 1,5 mm -5°C ÷ 80°C
Formats
Sheets sizes depend on the mould size and from the possibilities given by our thermoforming machines.
On request we can supply cut to size blocks.
can be supplied both in pre-assembled blocks and sheets to be assembled on site.
The latter option allow to optimize the freight volume and consequently to reduce the transport costs.
The assembly process can be chemical, using a solvent glue, which doesn’t leave any residual in the finished
product, or thermal, by welding.
Refill-tech can supply the suitable machines to make these operations.
Metal Frames for lifting and bounding:
In order to simplify maintenance and installation operations,
as well as to give a stronger structure to the blocks, Refill-
Tech can supply made to size metal frames in AISI 304, AISI
316L and galvanized sheet, suitably shaped and equipped
with lifting hooks.
Standard Block Sizes
use width B inclination Lenght L
(without projection)
Height H
(min ÷ max)
Projected
Surface
clarifier 1000 mm 60° 77 mm Pitch 530 ÷ 1320 mm 9,9 m²/m³
Hiyraulic Data - 60° inclined Modules
Hydraulic
Radius
Hydraulic
Diamter
Minimum free
Passage
2,4 cm 9,6 cm 89 mm
Refill-Tech S.r.l. Via Dei Tigli 8 - 20046 Biassono (MB) Tel. +39 039/2450122 - +39 039/5788021 Fax. +39 039/5788032 [email protected] - www.refill-tech.it
