10
MN Chemic al Industries (PVT.) LTD. Product Range Enzymes (Desizers, Bioscouring Agents & Hydrogen peroxide killers) Desizers Product Availabili ty Iconici ty Uses Application Enzymase RD conc. MN (Pakistan) SSTCL (China) - To remove the starch size and its derivatives. Concentrated enzyme for low temperature desizing. It’s a concentrated product and may be used 0.25g/l to 1 g/l. pH of bath must be acidic. Application Temperature ranges from 30 – 90 °C. Wide range of temperature and pH. May also be used in quick pad steam process. Enzymase HT conc. MN (Pakistan) SSTCL (China) - To remove the starch size and its derivatives. Concentrated enzyme for high temperature desizing. It’s a concentrated product and may be used 0.25g/l to 1 g/l. pH of bath must be acidic. Padding must be done above 80 °C. Also recommended for exhaust process and may be used at boiling. Application temperature ranges upto 105 °C. Enzymase RT Conc. MN (Pakistan) SSTCL (China) - Low temperature desizer to remove starch and its derivatives. Concentrated product having application temperature range from 30 °C to 70 °C. Application : 0.2g/l to 1 g/l Enzymase RDN MN (Pakistan) SSTCL (China) - To remove the starch size and its derivatives. Low temperature desizing agent. Recommended recipes: Cotton : 2 – 4 g/l pC : 1 – 3 g/l Wide range of temperatures and pH. Enzymase HTN MN (Pakistan) SSTCL (China) - To remove the starch size and its derivatives. High temperature desizing agent. High temperature desizing agent for continuous and exhaust desizing process. Use 2 – 4 g/l Bioscouring Product Availabili ty Ionic Nature Uses Application Bioclean MN100 MN (Pakistan) SSTCL (China) - Enzyme for bio scouring Enzymatic method to remove natural impurities. Application by pad batch method or by pad steam method. Particularly recommended to dye/print solid shades. Hydrogen peroxide Killers Product Availabili ty Ionic Nature Uses Application Catalase MN500 MN (Pakistan) SSTCL - Remaining peroxide Killer, an ideal Catalase is a kind of liquid enzyme which can effectively catalyse

Textile Auxiliaries MN Chemicals

Embed Size (px)

Citation preview

Page 1: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Enzymes (Desizers, Bioscouring Agents & Hydrogen peroxide killers)

Desizers

Product Availability Iconicity Uses Application

Enzymase RD conc.

MN (Pakistan) SSTCL (China) -

To remove the starch size and its derivatives. Concentrated enzyme for low temperature desizing.

It’s a concentrated product and may be used 0.25g/l to 1 g/l. pH of bath must be acidic. Application Temperature ranges from 30 – 90 °C. Wide range of temperature and pH. May also be used in quick pad steam process.

Enzymase HT conc.

MN (Pakistan) SSTCL (China) -

To remove the starch size and its derivatives. Concentrated enzyme for high temperature desizing.

It’s a concentrated product and may be used 0.25g/l to 1 g/l. pH of bath must be acidic. Padding must be done above 80 °C. Also recommended for exhaust process and may be used at boiling. Application temperature ranges upto 105 °C.

Enzymase RT Conc.

MN (Pakistan) SSTCL (China) -

Low temperature desizer to remove starch and its derivatives.

Concentrated product having application temperature range from 30 °C to 70 °C. Application : 0.2g/l to 1 g/l

Enzymase RDN

MN (Pakistan) SSTCL (China) -

To remove the starch size and its derivatives. Low temperature desizing agent.

Recommended recipes:Cotton : 2 – 4 g/lpC : 1 – 3 g/lWide range of temperatures and pH.

Enzymase HTN

MN (Pakistan) SSTCL (China) -

To remove the starch size and its derivatives. High temperature desizing agent.

High temperature desizing agent for continuous and exhaust desizing process. Use 2 – 4 g/l

Bioscouring

Product AvailabilityIonic Nature

Uses Application

Bioclean MN100

MN (Pakistan) SSTCL (China) - Enzyme for bio scouring

Enzymatic method to remove natural impurities. Application by pad batch method or by pad steam method. Particularly recommended to dye/print solid shades.

Hydrogen peroxide Killers

Product Availability Ionic Nature

Uses Application

Catalase MN500

MN (Pakistan) SSTCL (China) -

Remaining peroxide Killer, an ideal product for use to eliminate peroxide from the bath.

Catalase is a kind of liquid enzyme which can effectively catalyse hydrogen peroxide and decompose it into oxygen and water. It reacts only with hydrogen peroxide. Enzyme and degraded products have no effect on dyestuffs.

Page 2: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Wetting Agents & Stain Removers

Product Availability Ionic Nature

Uses Application

Scourwet MT conc.

MN (Pakistan) SSTCL (China)

Nonionic

Detergent & Wetting agent for pretreatment of all kinds of fabrics.

It is a concentrated product, have excellent wetting, rewetting and emulsifying power. Good compatibility with all desizing, scouring and bleaching auxiliaries.

Scourwet MRN

MN (Pakistan) SSTCL (China)

NonionicDetergent & Wetting agent for desizing, Scouring and bleaching.

Recommended for all kinds of pretreatement processes. Have good wetting and emulsifying power. Good compatibility with all pretreatment auxiliaries.

Fabwet MEL MN (Pakistan) SSTCL (China)

NonionicDetergent & Wetting agent for desizing, Scouring and bleaching.

Have excellent resistant to alkali with excellent emulsifying and wetting power.

Faberol MSO

MN (Pakistan) SSTCL (China)

NonionicStain remover

Excellent Stain Remover for oil and grease and griege stains. Recommended to be used in desizing and scouring process.

Faberol SOL MN (Pakistan) SSTCL (China)

NonionicStain remover

Excellent Stain Remover for oil and grease and griege stains. Recommended to be used in desizing and scouring process.

Hydrogen peroxide stabilizer & other pretreatment auxiliaries

Product Availability Ionic Nature

Uses Application

Texstab MN MN (Pakistan) SSTCL (China)

Nonionic Stabilizer for Hydrogen peroxide bleach

Versatile organic stabilizer suitable for both pad batch and continuous processing with hydrogen peroxide bleach. Recommended dosage for continuous is 4 – 5 g/l.

Hydrostab MBQ

MN (Pakistan) SSTCL (China)

Nonionic Stabilizer for Hydrogen peroxide bleach

Non silicate hydrogen stabilizer. Good stabilization power. Can be used for continuous and pad batch process.

Metaplex M-IRN

MN (Pakistan) SSTCL (China)

NonionicPretreatment sequestering Agent specially for Iron contents removal

Metaplex M-IRN is a special product having no foam properties which forms complexes with metal ions preventing pinholes and catalytic damages to 100% cotton and blended fabric.

Scourlube MNG

MN (Pakistan) SSTCL (China)

NonionicAnti-crease lubricant

Scourlube is an anti-crease lubricant used to prevent rope marks, crease marks, chafe marks and abrasion in wet process in winch, jet and continuous process.

Scourlube MNE

MN (Pakistan) SSTCL (China)

NonionicAnti-crease lubricant

Efficient anti-crease which prevent any permanent crease during wet processing.

Page 3: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Fluorescent Brightening Agents for Cotton

Product Availability Ionic Nature

Uses Application

Merywhite MBU 250%

MN (Pakistan) SSTCL (China) anionic

Fluorescent brightening Agent for cotton

This is an optical brightener in Powder form imparting high whiteness with a neutral blue tone. Application by padding and exhaust method. Recommended quantity is 0.5 to 2 g/l.

Merywhite MBU liq

MN (Pakistan) SSTCL (China) anionic

Fluorescent brightening Agent for cotton

A liquid OBA for exhaust and continuous process. May be used 1 to 6 g/l by pad dry process. Have excellent fastness properties.

Dyeing Auxiliaries

Product Availability Ionic Nature

Uses Application

Antimigrant PA

MN (Pakistan) SSTCL (China) Anionic Anti migrating Agent

Padding auxiliary for dyeing in continuous method to prevent migration of dyes. Best for both dyes and pigments.

Thermowet DIP

MN (Pakistan) SSTCL (China) Anionic Wetting Agent for dyeing

Fully biodegradable wetting agent for dyeing of all dyes. Good penetration power for liquor. Application: 0.1 – 0.2% o.w.f. or 1-2 g/l for continuous dyeing.

Washoff MNE

MN (Pakistan) SSTCL (China) Anionic

Highly efficient Wash off for unfixed reactive dye in both dyeing and printing process.

Blend of ethylene adducts. Improves the quality of dyed fabric by increasing the level of wash and rub fastness. Application: A guide recipe is 2 – 4 g/l in washing range is recommended.

Wash off ACR

MN (Pakistan) SSTCL (China) Anionic

Highly efficient Wash off for unfixed reactive dye in both dyeing and printing process.

A highly efficient polycarboxylic based product. Specially prepared wash off for continuous dyeing. Excellent results with no foam in the washing range at all. Application : 2 – 4 g/l in washing

Dispersol D MN (Pakistan) SSTCL (China) Anionic

Dispersing Agent for disperse dyes.

Dispersing D is combined dispersing and leveling agent for application of disperse dyes to polyester fibers. Application : 0.5 to 1 g/l

Fixer LF MN (Pakistan) SSTCL (China) Cationic Reactive & Direct fixer

Low formaldehyde fixing agent to improve fastness properties of reactive and direct dyes. 20 – 30 g/l by pad dry method or exhaust process may be applied.

Fixer NF MN (Pakistan) SSTCL (China) Cationic Reactive & Direct fixer

Formaldehyde free after treatment agent for improving the wet fastness of dyeing and prints produced with direct and reactive dyes on cellulosic fibers.

Page 4: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Printing Auxiliaries

Product Availability Ionicity Uses Application

Pigmaprint MNP

MN (Pakistan) SSTCL (China) Anionic Synthetic Thickener

It is a pre-neutralized synthetic thickener which exhibits excellent running properties and colour yield. 2 – 3 % of stock paste is recommended.

Pigmaprint MLT

MN (Pakistan) SSTCL (China) Anionic

Double strength synthetic Thickener for pigment printing

Good definition and coverage at low viscosities on wide screen machines e.g. 3.2 meters. Pigmaprint MLT can be printed at lower viscosities than have been traditionally used and so the problems due to wide screen are overcome without any loss of print quality. 1 – 1.3% stock paste is recommended.

Pigmabind EC-T

MN (Pakistan) SSTCL (China) Anionic Pigment Binder

APEO free acrylate based pigment-printing binder with a very little influence on viscosity of print paste.Application Printing : 8 – 20 %Pigment dyeing : 10 – 20 g/l

Pigmabind EC-S

MN (Pakistan) SSTCL (China) Anionic

Soft Binder for pigment dyeing & printing

APEO free acrylate based pigment-printing binder for Printing. It is specially prepared for pleasingly soft handle and excellent fastness properties.

Pigmabind F600

MN (Pakistan) SSTCL (China) Anionic Foam Binder

Contains thermal expandable microsphere which is formulated to produce on textile printing. The effect is achieved by curing this printing at about 130oC for 2 -3 minutes, at which the microspheres get expanded and the binder get cross-linked, then good fastness properties can be obtained to foam printing.

Pigmabind FM

MN (Pakistan) SSTCL (China) Anionic Foil Binder

Pigmbind F is a specific binder for adhering gold and silver foil to textiles. Pigmabinc F shows an excellent adhesive effect as a binder for foil.

Pigmabind FLK

MN (Pakistan) SSTCL (China) Anionic Flock Binder

Non-woven application, as an adhesive for lamination of film to paper / fabrics etc. Suitable for Flocking on to PVC Films. High Quality Flocking binder gives very soft and silky Feel.

Pigmabind M

MN (Pakistan) SSTCL (China) Anionic

Metal powder Binder for textile Printing

Pigmabind M is a binder applicable universally for making gold and silver metallic prints to fabrics. Printing with pigmabind M is without blackiening or oxidation effect. Have good fastness and bright prints with metallic powder.

Plastic Paste MNW

MN (Pakistan) SSTCL (China) Plastic paste white

White plastic paste for elastic printing on hosiery and other stretchable fabrics. Ready to used white paste and may also be used in white discharge.

Plastic Paste MNK

MN (Pakistan) SSTCL (China) Plastic paste clear

Plastic Paste, which finds application in printing of hosiery and other stretchable fabrics. Plastic Paste MNK is ready to use printing paste. Printing pigments can be mixed with the paste and may be applied on the fabric.

Page 5: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Magic paste MN

MN (Pakistan) SSTCL (China)

Special paste for over printing on dark back grounds

This paste can be print directly on the fabric surface which is not easy to be discharged to get the excellent imitated discharge effect.

Pigmasoft SLK

MN (Pakistan) SSTCL (China) Nonionic

Silicon softener for soft printing

Especially designed, combined Softener and Lubricant for Pigment Printing to get extra soft printing and to avoid crack marks after washing on pigment prints.Application : 0.25 to 0.5%

Auxiliary On Top

MN (Pakistan) SSTCL (China) Anionic

Rheology modifier for Pigment thickener

This product is water based rheology modifier for pigment printing to enhance the effect of synthetic thickener which is as follows, Helping to reduce thickener consumption To attain better print definition No flushing No back penetrationApplication : 0.2 to 0.5%

Formafix VLF 200%

MN (Pakistan) SSTCL (China)Prochiber (Itly)

Anionic

Low Formaldehyde fixer for pigment printing.

100% active product.

FORMAFIX VLF-200% is a low formaldehyde printing fixer. Its low value of free formaldehyde offers an advantage in handling and labelling. Its high solid content facilitates efficient use of storage space Application : 0.25 to 1%

Pigmafix VLF

MN (Pakistan) SSTCL (China) Anionic

Low formaldehyde fixer for pigment printing. Based on hexa methoxy methylated melamine formaldehyde.

Low formaldehyde fixer for pigment printing and dyeing. Recommended dosage is 0.5% to 2%.

Pigmafix ZF MN (Pakistan) SSTCL (China) Anionic

Formaldehyde free fixer for pigment printing

Formaldehyde free external cross-linking agent for improving the fastness of pigment prints.Application : 1 to 2%

Reducer MNP

MN (Pakistan) SSTCL (China)

Discharge agent for discharge printing.Reducing agent for direct printing of vat.

Reducer MNP is an environmentally friendly, zinc-free reducing agent and is ideal as a discharge agent in solvent-free pigment discharge printing on discharge grounds dyed with reactive or direct dyes.

Page 6: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Finishing Auxiliaries

Product Availability Ionic Nature

Uses Application

Casilsoft NI MN (Pakistan) SSTCL (China) Nonionic Nonionic Paste

It is a especial non ionic softener particularly designed for least change in shade and has extremely little effect on whiteness of polyester, cotton or blends.

Casilsoft NIF

MN (Pakistan) SSTCL (China) Nonionic Nonionic flakes

It is a highly concentrated 100% active, especial non ionic softener flakes. It gives extra ordinary softness particularly to fabric printed or dyed with pigments, although it is suitable for all fabric types.

Casilsoft NIC

MN (Pakistan) SSTCL (China) Nonionic

Nonionic Concentrated Paste

It is a highly concentrated 100% active, especial non ionic softener paste. It gives extra ordinary softness particularly to fabric printed or dyed with pigments, although it is suitable for all fabric types

Casilsoft PEMN (Pakistan) SSTCL (China) Nonionic

Polyethylene emulsion to improve tear strength of the fabric.

Casil Soft PE is polyethylene emulsion particularly designed to improve tearing strength of the fabric, sew ability of the fabric and anti static properties of yarns made of poly acrylic fibers, especially high bulk yarns.

Casilsoft W-PE

MN (Pakistan) SSTCL (China) Nonionic

High strength polyethylene emulsion specially designed to used with resin.

High strength polyethylene specially to used in combination with easy care resin finish. Good compatibility with all finishing auxiliaries and showed improved results when used with resin.

Silkolux ME-L

MN (Pakistan) SSTCL (China) Nonionic Silicon Micro emulsion

Silkolux ME-L is specially designed concentrated silicon micro emulsion for highly efficient, economical micro emulsion for permanent finishing effects on all types of cotton fabrics and its blends.

Silkolux ME-M

MN (Pakistan) SSTCL (China) Nonionic Silicon micro emulsion

Silkolux ME-M is specially designed concentrated silicon micro emulsion for highly efficient, economical micro emulsion for permanent finishing effects on all types of cotton fabrics and its blends.

Silkolux ME-S

MN (Pakistan) SSTCL (China) Nonionic Silicon Micro emulsion

Silkolux ME-S is specially designed concentrated silicon micro emulsion for highly efficient, economical micro emulsion for permanent finishing effects on all types of cotton fabrics and its blends.

Polysilsoft MIS

MN (Pakistan) SSTCL (China) Nonionic Silicon Macro emulsion

Polysil soft MIS is used as silicon softener in finishing of high class, elegant qualities. On cellulosic fabrics and their blends a very soft handle and good wash, impart a pleasant and silky handle to the finished goods.

Polysilsoft SF

MN (Pakistan) SSTCL (China) Nonionic Silicon softener

Polysil soft SF is used as silicone softener in finishing getting very smooth and soft handle. It improves tear strength, abrasion resistance and also improves sew ability.

Page 7: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Special Finishes

Product Availability Ionic Nature

Uses Application

Easyfix ECOMN (Pakistan) SSTCL (China) Anionic

Crease-resistant and easy-care finish for cotton and linen articles and their blends with synthetics, according to the requirements of current eco-standards, e. g. Oeko.Tex Standard 100.

Resin for the low-formaldehyde easycare finishing of textile materials composed of cellulosic fibres, alone and in blends with synthetics. Well balanced and highly reactive cross linking agent with low formaldehyde content for easy care finishes with highest effect level. Wash-and-wear, shrink-resistant finish of cotton, linen and its blends with synthetics

Application: 50 -80 g/l may be applied along with 25% MgCl2 of applied recipe of resin. Also add 20 – 40 g/l of casilsoft W-PE and Silkolux ME-L for hand feel and tear strength.

Proflour WPN

MN (Pakistan) SSTCL (China) Cationic

Durable oil and water repellent for cotton and its blends.

A Durable Oil, water and stain repellent finishes of cotton, viscose, synthetic/cellulose blends and of synthetics for special end uses.Application: 20 – 80 g/l depending upon the requirements and wash durability.Curing at 150 °C for 5 minutes or 180°C for 90 seconds is required after drying.

Prorelease MNS

MN (Pakistan) SSTCL (China) Cationic

Durable Soil release finish for cotton and its blends with synthetics.

Stain release finish for textiles based on cellulose and synthetic fibers and their blends. It is emulsion of a polymer, perfluorinated compound.Application : 30 – 60 g/l Curing at 150 °C for 5 minutes or 180°C for 90 seconds is required after drying.

Berflame CT-N

MN (Pakistan) SSTCL (China) Nonionic Fire retardant non durable

Berflame CTN is a clear, non-durable, halogen free flame retardant designed for pad application. Berflame CTN may be applied to cellulosics, synthetics and its blends. Application : 250 to 400 g/l

Berflame CT-S

MN (Pakistan) SSTCL (China) Nonionic Fire retardant semi durable

Berflame CT-S is semi durable fire retardant for cotton fabric. Best product of soak test BS 5852 source 0 to 5.Application : 500 to 700g/lCuring at 150 °C is required for 5 minutes.

Berflame CT-P

MN (Pakistan) SSTCL (China) Anionic

flame-retardant finish fast to washing and dry cleaning on cellulosic fibers

Simple application on common textile machinesThe fabric to be treated should be highly absorbent, and free from alkali and other extraneous matter.

Application : 300 to 400 g/lNote that 40 – 50 g/l of melamine resin and 25% of the recipe , phosphoric acid must be added in bath.Curing at 150 C for 5 minutes is required.After curing fabric must be washed urgently with soda ash to neutralize the effect of phosphoric acid and also a rinse with 1-2g/l of hydrogen peroxide must be given to avoid fishy smell.

Microban MN

MN (Pakistan) SSTCL (China) Anionic

Concentrated anti microbial product to stop growth of bacteria.

Microban MN is a durable treatment for cotton, cotton blends (cotton content >35 %) and viscose which controls the population of bacteria on the fibers, and reduces the effects of bacterial action such as odour generation, degradation of the fabric, and transfer of organisms.

Page 8: Textile Auxiliaries MN Chemicals

MN Chemic al Industries (PVT.) LTD.Product Range

Texbind PG MN (Pakistan) SSTCL (China) Anionic Anti pilling finish

Texbind PG is an excellent anti pilling agent. Specially prepared for the fabrics which showed poor pilling e.g. satin fabric. Application : 10 – 30 g/l

Downproof AP

MN (Pakistan) SSTCL (China) Anionic

Excellent air permeable finish with soft touch

Downproof AP is special finish to get high quality air permeable fabric without loosing softness of the fabric. Excellent filling of structure of the fabric, showed excellent results when calandered. Application : 20 – 50 g/l After drying heavy calander is required to get excellent results.