Upload
others
View
56
Download
1
Embed Size (px)
Citation preview
TERRION ATM 5000
TERRION ATM 5220
TERRION ATM 5250
TERRION ATM 5280
- Main technical Features
- Technical details
- Base system and options
Main Features
DEUTZ Engines: reliable, powerful, environmentally friendly
The engines meet the European Standards of exhaust gases toxicity – Class III A
Continuous drive transmission ZF T7300 (CDT) to reach an optimal tractive effort and power
CARRARO front axle with an optional cushioning facility
BOSCH power hydraulic and BOSCH-EHR attached implements system with vibration damping
5 hydraulically actuated valves BOSCH
Space cab TERRION, in standard version with the air conditioning
Optionally, the cab may be equipped with the pneumatic shock absorbers at the rear end
Robust assembly of the half-frame for heavy loads
The approval of the vehicle type is available in compliance with EC standards, as well as operating permit
Technical details
1. DEUTZ engine TCD 2013 L06 2V
- Common Rail system- Standard of exhaust gases toxicity: Class III A- Electronic engine control- Low emissions and noise- Low fuel consumption- Powerful and reliable
2. Transmission ZF T 7300
- Electronic control- 4 steps, switched under the load- Electric-hydraulic reverse gear switching- Automatic locking of differential lockup - Extremely reliable- Simple in servicing- Long life time
Speed in km/hStep-down gearing Normal gearing
3. Table of velocities
Big number of gears in the main operating range40 speeds with a step-down gearing forward/backward Speed 50 km/h as option
4. Front axle Carraro
Good maneuverabilityHigh load capacityHigh clearanceHigh reliabilityLong life time
5. Front axle CARRARO with cushioning
Standard version 50 km/h, optional –40 km/hVery good characteristics at driving and braking owing to long leversHigh reliabilitySimple in servicing (few pressure lubricators)
6. Space cab TERRION
Space and comfortable cab Air conditioner in standard versionComfortable operator's seat with a pneumatic suspension Folding passenger's seat4 adjustable working headlights on the roof and at the front4 adjustable working headlights on the roof and at the rear endTelescopic mirrors of the rear view, left and right three-polar socket (25 A)unipolar socket
7. Rear pneumatic cab suspension
Damping of vibrations and noise owing to four cone bearingsOptionally, we propose a rear-end pneumatic suspension for a better comfort Automatic leveling, providing the availably of pneumatic suspension Proved pneumatic shock absorbers which are standard for the motor transport application
8. Half-frame design
Stable and very reliable arrangement on the half-frame High-strength casting Designed for extremely loads Additional equipment installation is possible without additional reinforcement, e.d. mobile pumping unit In the case, if the engine servicing is required the tractor's body must not be demounted.
Base system:Engine Deutz engine TCD 2013 L06 2V (the class of emissions
toxicity according to ЕС III A) - Common Rail system - Electronic engine control EMR 3 - Turbocharging - Compact cooling system - Fuel tank volume 520 litres
Power, upon ISO 14396
TERRION ATM 5220max. 170 kW/ 231 h.p. - nom. 162 kW/ 220 h.p. TERRION ATM 5250max. 189 kW/ 257 h.p. - nom. 180 kW/ 245 h.p.TERRION ATM 5280max. 205 kW/ 278 h.p. - nom. 195 kW/ 265 h.p.
Transmission •Continuous drive transmission ZF T 7300 - 4 steps - 24 speeds with a step-down gearing forward/backward - Electrohydraulic reverse gear switching - Automatic locking of differential lockup - Maximal speed 40 km/h - Total permissible weight 14.000 kg
Power shaft (PS) PS speed 540E,750,1000 rpm Electrohydraulically switched - Switch on /off at rear part of the wing - PS tail type III, 1 3/4",
Front axle Carraro Front axcle CARRARO with 100 % differential lockup to be locked automatically depending on a steering angle and speed - Full drive automatic switching at braking
Rear hitch device (RHD)
EHR, lifting device electrohydraulic control with vibration damping - Swithch on/ off at the rear part of the wing to remote control - Lifting capacity 10.500 kg - Three-point hitch mechanism and central tow-bar with a quick-split coupling WKS (cat.3)
Hydraulic Separate oil bath for hydraulic and transmission - Oil amount taken off 50 l. - Load Sensing system - Axial piston pump with a capacity of 110 l/min - 4 (optionally 5) blocks of hydraulic valves with two flow regulators,
three kickout, one mechanical fixation - Pressure-free drain
Towing coupler(TC) Height-adjustable hitch mechanism - Clevis with Ø 38 mm stud
Pneumatic brake system
Two-loop pneumatic brake system
Cab Space cab - front and rear cone shock struts - height and angle adjustable steering column - Air conditioning - operator's seat GRAMMER with pneumatic shock-absorber - folding passenger's seat - audio preparation - 4 adjustable work headlights on the roof and at the front - 2 adjustable work headlights on the roof and at the rear end
Ballast Ballast bracket (480 kg) to mount 16 front ballastsTyres front: 460/85 R 34 - Solid disks
rear: 620/70 R 42 - Solid disks
Front wings Turning front wings
Agrotechmash Jsc. Zweigniederlassung Deutschland reserves the right to make alterations concerning to equipment, implementation, and technical charachteristics variation without the prior notification. All data indicated here are not guaranteed. The right to mistakes and misprint is reserved.©
Options Main group Equipment Note!Transmission
Version 50 km/hcushioned front axle included
Transmission kickdown Gears 40 forward/40backward (upon enquiry, only)
PS tail type II, 1 3/8", 21 teeth Separate delivery! PS tail type I, 1 3/4",
6 teethSeparate delivery!
Front axle Cushioned front axle Version 40 km/hLifting device Hydraulic central tow-bar
cat. 3
Three-point hitch mechanism and central tow-bar (cat. 4N)
central tow-bar with a quick-split coupling WKS and central tow-bar with a ball
Lower arms self-regulation Hydraulic Axial-piston pump, 150 l/min.
Fifth block of hydraulic valve as additional set for upgrade
Through dealer, only
Power Beyond Cab Cab cushioning - rear pneumatic
suspension
Work headlights at the front strut Work headlights at the rear strut Rotating beacon
Hitch mechanism Application (3000 kg)Towing coupler (TC) with a coupling ball K 80
Base plate with Piton Fix Pendulum-type TC Base plate with TC with coupling ball K 80
Pneumatic bracking system
One-loop pneumatic brake system Only together with two-loop pneumatic brake system
Ballast Ballast bracket 480 kg is excluded Ballast bracket 809 kg Ballast bracket 480 kg is
excludedBallast loads 16x45 kg
Together with ballast bracket 480 kg
Ballast loads 20x45 kg
Together with a big ballast bracket 809 kg, only
Front hitch device (FHD)
FHD 54000 N, cat. 3N Ballast bracket is excluded
Power shaft (PS) PS with electrohydraulic switching on
Ballast bracket is excluded
The wheels instead the standard wheels **
No wheels With auxiliary wheelsfront 520/70 R 34rear 650/70 R 42
Solid disks Continental Co. make
front 600/65 R 34rear 710/70 R 38
Solid disks Continental Co. make
front 600/65 R 38rear 650/85 R 38
Solid disks Continental Co. make
front 600/65 R 38rear 710/70 R 42
Solid disks Continental Co. make
front 270/95 R 44rear 300/95 R 52
Solid disks/ Track 1800
front 270/95 R 44rear 300/95 R 52
Solid disks/ Track 2100
front 270/95 R 44rear 300/95 R 52
Solid disks/ Track 2250
** different versions of wide tyres and wheels are available upon requestAgrotechmash Jsc. Zweigniederlassung Deutschland reserves the right to make alterations concerning to equipment, implementation, and technical charachteristics variation without the prior notification. All data indicated here are not guaranteed. The right to mistakes and misprint is reserved.©