TENDER DOCUMENT TENDER No DLI/CON/633/379 FORengineeringprojects.com/Tender/UploadFiles/1837_Volume-III.pdf · 23 AOR23 Supply, Installation, testing & commissioning of bulk head

AN ISO 9001 & 14001 COMPANY

TENDER DOCUMENT

TENDER No: DLI/CON/633/379

FOR

‘Electrical, fire fighting & HVAC works at Construction of Bihar Police Academy Project, Rajgir, Dist: Nalanda (Bihar)’, Pkg-II

(Non Schedule items)

VOLUME – III

PRICE BID / BILL OF QUANTITY

ANNEXURE

Sl. No. DescriptionCost Put to Tender

(in Rs)In Figure In Words

1 2 3 4 5 6

1

Electrical,firefighting, HVAC works at Construction of Bihar Police Academy, Rajgir, District Nalanda, Bihar (Package‐II ) (N.S)

Rs18,84,62,131.00

Date :

Name of Work : Consturction of Bihar Police Academy, Rajgir, Nalanda, Bihar (Pkg ‐ II) Elecrtical,firefighting, HVAC etc (Non‐Scheduled)

Seal & Signature of Tenderer

Rate in Percentage (Above / Below/ At par) Final Amount (in Rs)

NIT NO: DLI/CON/633/379 PRICE FORMAT

NSRS. No. Description of item Unit Amount

1 Inside electrical works , all buildings Rs. 81231043.00

2 Inside electrical works , Conference cum welfare Centre Rs. 8294114.00

3 External Electical Rs. 45594782.00

4 Fire Fighting Rs. 18572722.00

2 HVAC Rs. 34769470.00

Total Rs. 188462131.00

Engineering Projects (I) Ltd

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE

GRAND SUMMARY - SHEET for Electrical, fire fighting & HVAC(NSR)

EPIL

(1C)NSR

1 Sub-head : I : Point Wiring : Rs. 1320911

2 Sub-head : II : Fans & Light Fixtures : Rs. 38291104

3 Sub-Head : III - Distribution Boards : Rs. 6125360

4 Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars : Rs. 18783824

5 Sub-Head : V L.T. Cables and Cable Trays : Rs. 0

6 Sub-head : VI Earthing & Lightning Conductor System : Rs. 33120

7 Sub Head - VII : Telephone System : Rs. 3493753

8 Sub Head - VIII : MATV System : Rs. 3031282

9 Sub-head : IX - Fire Alarm & Public Address System : Rs. 7391688

10 Sub-head : X - Lifts : Rs. 2760001

Total : Rs. 81231043


S U M M A R Y - S H E E T

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACADEMY AT RAJGIR IN THE DISTRICT OF NALANDA VIDE S.O.R. P.H.E. GOVT. OF BIHAR 01.07.2008

PART-III INTERNAL ELECTRICAL INSTALLATION ALL BUILDINGS

SUMMARY

EPIL

Sl.No.

Deptt. Item No.

Description Unit Total Quantity

Rate Amount

Sub-head : I : Point Wiring

1 M.R. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing& fixing of moulded plate type 6 pin 25 Amps socket with plug top and single phase motor starters of the minimum featuresof current setting over load protection etc as required. (For A.C points ). Each 607.00 1863.00 1130841

2 M.R. Supplying and fixing 32 Amps, 415Volts, TPN industerial type, Socket outlet with 4 pole and earth, metal enclosed plugtop along with 30 Amps 'C' Series, TP MCB in sheet steel enclosure, on surface or in recess with chained metalcover for thesocket out let and complete with connections, testing and commissioning etc. as required.

Each 106.00 1688.00 178928

3 M.R. Providing, fixing, connecting, testing and commisssioning of Aviation Light including drawing of control cable complete asrequired. Each 2.00 5571.00 11142

Total Sub-head : I 1320911

BIHAR POLICE BUILDING CONSTRUCTION CORPORATION NEAR B.M.P-5 CAMPUS, KAUTILYA NAGAR, PATNA - 800014

SCHEDULE OF QUANTITES FOR ELECTRICALBILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACADEMY AT RAJGIR IN THE DISTRICT OF NALANDA

VIDE S.O.R. P.H.E. GOVT. OF BIHAR 01.07.2008PART-III INTERNAL ELECTRICAL INSTALLATION ALL BUILDINGS

SCHEDULE OF QUANTITY ITEMS BASED ON NON-SCHEDULE ITEMS (NSR)Sheet- 1C

A-BPA-ELECTRICAL-ESTIMATE Page 1

EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-head : II : Fans & Light Fixtures

1 AOR1 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated complete with Electronicsballast, lockable holders and lamp etc. complete as required. Similar to Philips Cat. No. TMS 122 / 128 HF

Each 4567.00 1549.00 7074283

2 AOR2 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated, complete with Electronicsballast, lockable holders and lamp etc. complete as required.Similar to Philips Cat. No. TMS 122 / 228 HF

Each 117.00 1998.00 233766

3 AOR3 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated, complete with dimmableballast, lockable holders and lamp etc. complete as required.Similar to Philips Cat. No. TMS 122 / 228 HF Each 10.00 2290.00 22900

4 AOR4 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated, complete with electronicballast, lockable holders and lamp etc. complete as required.Similar to Philips Cat. No. TMS 122 / 254 HF Each 45.00 3221.00 144945

5 AOR5 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withelectronic ballast, lockable holders, reflector and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/128 Each 83.00 2990.00 248170

6 AOR6 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withdimmable ballast, lockable holders, reflector and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/128 Each 13.00 3266.00 42458

7 AOR7 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withelectronic ballast, lockable holders, reflectors and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/228 Each 527.00 3220.00 1696940

8 AOR8 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withDimmable ballast, lockable holders, reflectors and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/228 Each 586.00 3496.00 2048656

9 AOR9 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withelectronic ballast, lockable holders, reflectors and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/254 Each 32.00 3964.00 126848

10 AOR10 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coated complete withDimmable ballast, lockable holders, reflectors and T-5 lamps etc. complete as required similar to PHILIPS cat no TCS150/254 Each 12.00 4240.00 50880


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

11 AOR11 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires complete with electronicballasts including lamps and all accessories complete with lockable holders etc. complete as required Similar to Philips CatNo. FBH 145/218 HF. Each 173.00 2634.00 455682

12 AOR12 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires complete with dimmableballasts including lamps and all accessories complete with lockable holders etc. complete as required Similar to Philips CatNo. FBH 145/218 HF. Each 24.00 5394.00 129456

13 AOR13 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-T lamp, luminaire withelectronic ballast and all accessories of approved colour complete as required similar to PHILIPS cat no FBH 225/226 HF.

Each

14 AOR14 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-T lamp, luminaire withelectronic ballast and all accessories of approved colour complete as required similar to PHILIPS cat no FBH 225/242 HF.

Each 29.00 4232.00 122728

15 AOR15 Supply, Installation, testing & commissioning of recess type mirror optics light fixture including 4x14W, T-5 Lamp withelectronic ballast complete as required similar to Philips Cat No. TBS 869 / 414 D8 HF

Each 60.00 4453.00 267180

16 AOR16 Supply, Installation, testing & commissioning of surface type mirror optics light fixture inclduing 4x14W, T-5 Lamp withDimmable ballast complete as required similar to PHILIPS cat no TBS 814 / 414 D8 HF Each 59.00 4729.00 279011

17 AOR17 Supply, Installation, testing & commissioning of surface type mirror optics light fixture inclduing 4x14W, T-5 Lamp withelectronic ballast complete as required similar to PHILIPS cat no TPS 814 / 414 D8 HF Each 31.00 9654.00 299274

18 AOR18 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 2x11W CFL withelectronics ballast complete as required similar to PHILIPS cat no FCS 518/211. Each 465.00 1110.00 516150

19 AOR19 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 2x18W CFL withelectronics ballast complete as required similar to PHILIPS cat no FCS 518/218. Each 1991.00 1341.00 2669931

20 AOR20 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 1x14W, T-5 withelectronic ballast complete as required similar to PHILIPS cat no TCH 207 HF Each 655.00 1380.00 903900

21 AOR21 Supply, erection, testing & commisioning of surface type light luminaire for mirror light including 1x14W T-5 lamp withelectronic ballast complete as required similar to PHILIPS cat no TWG 207 (Adrino) Each 487.00 853.00 415411

22 AOR22 Supply, erection, testing & commisioning of surface type light luminaire for mirror light including 1x28W, T-5 lamp withelectronic ballast complete as required similar to PHILIPS cat no TWG 207 (Adrino) Each 253.00 1073.00 271469


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

23 AOR23 Supply, Installation, testing & commissioning of bulk head light fitting complete with glass cover, wire guard, 11 wattcompact fluorescent lamp, pressure impregnated copper ballast etc. complete as required similar to Cat No. Philips FXC101 Each 363.00 868.00 315084

24 AOR24 Supply, erection, testing & commisioning of surface type light luminaire with 20W Ternado lamp, electronic ballastcomplete as required similar to PHILIPS Cat No ECB 300 Each 623.00 1840.00 1146320

25 AOR25 Supply, erection, testing & commisioning of surface type light luminaire with 70W CDM-TD lamp, electronic ballastcomplete as required similar to PHILIPS Cat No MINI 300 Each 47.00 15180.00 713460

26 AOR26 Supply, erection, testing & commisioning of surface type light luminaire with 150W CDM-TD lamp, electronic ballastcomplete as required similar to PHILIPS Cat No DBP 300 Each 43.00 18400.00 791200

27 AOR27 Supply, erection, testing & commisioning of surface type light luminaire with 23Watt lamp, electronic ballast complete asrequired similar to PHILIPS Cat No FCG 315 Each 6.00 1835.00 11010

28 AOR28 Supply, erection, testing & commisioning of surface type wall bracket light luminaire with 24Watt ternandolamp, electronicballast complete as required similar to PHILIPS Cat No EWC 300 (white) Each 2659.00 1150.00 3057850

29 AOR29 Supply, erection, testing & commisioning of wall mounted holder with 5 Watt CFL lamp complete as required of approvedmake. Each 539.00 230.00 123970

30 AOR30 Supply, installation, testing and commissioning of Flame Proof light fixture with 2X40W lamp complete as required simillarto Sudhir Cat no. FF/OA//1271. Each 78.00 5520.00 430560

31 AOR31 Supply, installation, testing and commissioning of Flame proof exhuast fan 12", 1440 RPM, 0.2 HP motor complete asrequired. Each 8.00 7820.00 62560

32 AOR32 Supply, Installation, testing & commissioning of recessed type side wall fitiing (New Brick light) complete with 2 x 9W PLlamp, copper ballast, lamps including connection complete as required including reccessing the same with zinc passivatedAluminium box similar to Wipro Cat No.PSP 42126 . Each 45.00 1996.00 89820

33 AOR33 Supplying, installation, testing and commissioning of emergency exit light with lamp with chargeable maintenance freebatteries, 2 pin socket. The luminaire shall be complete with initial charge of battery with one hour backup etc. complete asrequired. Similar to Legrand Model No. 61730+660874. Each 32.00 5230.00 167360

34 AOR34 Supply, Installation, testing & commissioning of UP & DOWN Lighter, wall mounted complete with 1X70 watt lamp,pressure impregnated copper ballast etc. complete as required similar to PHILIPS Cat No CRESSIDA DCP 72 / CDM - T.

Each 12.00 11580.00 138960


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

35 AOR35 Supply, Installation, testing & commissioning of following sizes 1400 rpm sweep ceiling fan complete with double ballbearings, blades, down rod, shackle insulator, canopy etc. complete as required.

a) 1200mm Each 3244.00 1748.00 5670512

b) 1400mm Each 3.00 1840.00 5520

36 AOR36 Supply, Installation, testing & commissioning of following sizes of exhaust fan complete with louver, bird screen & with 3core flexible wire as required. a) 305 mm 900 RPM Each 937.00 4140.00 3879180

b) 381 mm 900 RPM Each 20.00 5060.00 101200

37 AOR37 Supply, Installation, testing & commissioning of oscillating type 400mm sweep bracket fan including mountingarrangement and push button speed regulator etc. complete as required. Each 23.00 4140.00 95220

38 AOR38 Supply, installation, testing and commissioning of wall mounted electric hand drier consisting of strip heater doublecentrifugal high speed blower rated for continuous use in summer and winter including 3 core flexible wire etc. complete asrequired. Similar to Kopal Cat. No.R-20. Each 106.00 3220.00 341320

39 AOR39 Supply and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamp of internal dia 140mm, 73 mm height, 3mmthick rim top lid of 1.5mm thick M.S sheet lidss shall be screwed into M.S. box by means of 3mm round headed screws,clamps shall be made of 12 mm dia M.S bar bent to be shape as per standard drawing with over all length as 80 cm

Each 3244.00 143.00 463892

40 AOR40 Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connectioncomplete as required. Each 3244.00 552.00 1790688

41 AOR45 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp fixed to 40 mm dia 1 mtr longG.I. pipe fabicated as required and mounted on wall with suitable size clamp complete as required, make simillar toPHILIPS CAT NO. SGP 301 Each 21.00 6900.00 144900

42 AOR46 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp fixed to 3 M long, 75mm dia'B' class G.I. pipe with 300x300x6mm base plate including supplying and erection of cement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4 stone aggregate 20mm nominal gauge with pedestal of approved design/drawing. The dimensionof foundation shall be 450x450x600mm laid over 100mm thick 600x600mm bed of 1:4:8 concrete with 50mm reducer attop complete as required. make simillar to PHILIPS CAT NO. SGP 301.

Each 23.00 9660.00 222180


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

43 AOR47 Supply and erection of Highbay Luminaire closed version with anodized aluminium reflector comprises of housing,Reflector & Glass Cover light fitting complete with 400watt HPI (plus) BU lamp, pressure impregnated copper ballastetc.complete as required similar to PHILIPS Cat No HPK - 225/HPI 400 NB with glass.

Each 16.00 8740.00 139840

44 AOR48 Supply and erection of battery operated emergency light luminaire with 11 watt CFL including providing and fixingmaintenance free batteries and battery charger mounted on ceiling/wall complete as required and approved by client. Each 6.00 2760.00 16560

45 AOR49 Supply, installation, testing and commissioning of ceiling suspended Table Tenis light complete as required. Each 4.00 27600.00 110400

46 AOR50 Supply, installation, testing and commissioning of ceiling suspended Billiard light complete as required. Each 3.00 32200.00 96600

47 AOR51 Supply, installation, testing and commissioning of ceiling suspended Chendelier Light fixture complete as required andapproved by client. Each 15.00 8740.00 131100

48 AOR52 Supply, installation, testing and commissioning of Aviation light simillar to Philips cat no XGP 400 1 X LED - K2 / RD240V Each 2.00 6900.00 13800

Total Sub-head : II 38291104


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-Head : III - Distribution Boards

1 Supplying, installation, testing and commissioning of surface/recess mounting vertical type three pole and neutral, prewired,sheet steel, MCB distribution board 415 volt, dust protected and powder painted, inclusive of 200 amps tinned copperbusbar, common netrul link, earth bar, din bar for mounting MCB detachable gland /knock out plate, and with built in loosewire box, and superior make terminal connectiors for all adequate size of FR PVC insulated copper conductor upto theterminal of following way with double door as required

A. 8 WAY SP&N DB 162.00 6440.00 1043280i) 1 No. 40 Amps DP MCB+RCCBii) 4 Nos. 6-20 Amp SP MCB as outgoing

B. 12 WAY SP&N DB 138.00 8280.00 1142640i) 1 No. 40 Amps DP MCB+RCCBii) 8 Nos. 6-20 Amp SP MCB as outgoing

C. 4 WAY TP&N DB 67.00 12880.00 862960i) 1 No. 40 Amps 4P MCB+RCCBii) 12 Nos. 6-20 Amp SP / 3 Nos TP MCB as outgoing

D. 8 WAY TP&N D.B 127.00 16560.00 2103120i) 1 No. 32 Amps 4 Pole MCB +RCCBii) 24 Nos. 6-32 Amps SP/ 6 Nos TP MCBs as outgoing

E. 12 WAY TP&N D.B. 46.00 21160.00 973360i) 1 No. 63 Amps 4P MCB +RCCBii) 36 Nos. 6-20 AMPS SP/ 9 Nos TP MCB outgoing

Total Sub-head : III 6125360


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars

General Notes:

1 ACB:LSIG (Microprocessor Based) releases shall be used for incoming feeders & LSI releases for outgoing breakers.

2 MCCB:MCCBs shall be used with Microprocessor Based releases

3 Breaking capacity mentioned is Ics value.

4 This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to have been considered.

5 All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other than used in control circuit.

6 All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases & ON/OFF/Trip / Spring charged/ready to close indicating lamps.

7 All MCCBs shall be provided with rotary operating handle and ON/OFF lamps.

8 All meters shall be digital type (unless otherwise specified)

9 All MCBs shall be motor duty type.

10 All current/voltage transformer shall be cast resin type.

11 All indicating lamps shall be LED type.

12 Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)

13 All internal control wiring shall be heat resistant type.

14 All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking scheme given in SLD.

15 All TP feeders shall be provided with Isolable neutral link.


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

16 Bus bar chamber & cable entry both shall be provided at top only.

17 Bus couplers shall be provided with ON & OFF indicating lights but without releases.

18 All feeders shall be provided with door interlocked with door defeat, pad lock facility.

19 Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be provided to cover the same.

20 Spare contacts of ACBs / MCCBs / Relay / Contactor shall be wired upto terminal block.

21 20% spare control terminal to be provided.

22 All MCCBs shall be provided with Thermal Magnetic based over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.

23 All incoming/outgoing cables shall be terminated on links/terminals.

24 All Switchgear used in Starter shall be type-2 coordinated. Contactor rating shall be selected as per the heavy duty KVARrating of the capacitor bank from capacitor duty contactor range. Vendor to furnish the type-2 coordination chart andcapacitor duty contactor selection chart.

25 Control supply in main LT Panel will be 24V DC & 230V Ac/24V DC control unit will be provided in the panel as

26 All energy meters supplied shall be Post Paid Dual type single/three phase as required simillar to Secuer make.

1 MV Panel BoardsMR Supply, erection, testing and commissioning of LT Panels fabricated out of 2mm thick CRCA sheet steel, dust and vermin

proof with reinforcement of suitable size angle iron, fully compartmentalized cubical type (folded joints construction), floormounted, totally enclosed, extendable on both sides, switch board suitable for use on 415V, 3 phase 4 wire, 50 c/s systemhaving 50 KA fault capacity, housed with incoming and outgoing aluminum bus bars, interconnection, interlocking betweenfeeders etc. with indicating lamps, push buttons, necessary accessories, all feeders protection & meters compatible toPC/PLC/BMS with communication port RS-485 etc. including supply and fixing of base channels of 100x50x6mm asrequired and with following incoming and outgoing switchgears with protection and metering etc. as per specification andschematic diagram and provision to be made for interfacing with BMS etc. complete as required.


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

1.1 MR Admin Block a) Incomer1 Nos.800A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communication port, Set of CTs of 800/5A Class-1, 15 VA. b) Bus barsSet of 1000 A electrolytic aluminum bus bars.

c) Out goingsi) 1 Nos.100A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 100/5A Class-1, 15 VA.

ii) 2 Nos.250A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 250/5A Class-1, 15 VA.

iii) 2 Nos.400A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 400/5A Class-1, 15 VA.

iv) 5 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAv) 6 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VAvi) 5 Nos Power Contactor with Digital Astronomical timer switch Set 2.00 466992.00 933984

1.18 MR Motor Training School 1 No.160A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Setof CTs of 160/5A Class-1, 15 VA. b) Bus barsSet of 200 A electrolytic aluminum bus bars.

c) Out goingsi) 3 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAii) 3 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VAiii) 3 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 193200.00 193200

1.8 MR Asst. Director Residence a) Incomer1 No 200A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 200/5A Class-1, 15 VA.

b) Bus barsSet of 300 A electrolytic aluminum bus bars.


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

c) Out goings6 Nos. 63A TPN MCB (10 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Set ofCTs of 63/5A Class-1, 15 VA.

Set5.00 253000.00 1265000

1.19 MR Faculty Guest House 1 No.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter,Multifunction meter with communication port, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.


ii) 4 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAiii) 4 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VA Set

1.18 MR Primary School 1 No.160A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Setof CTs of 160/5A Class-1, 15 VA. b) Bus barsSet of 200 A electrolytic aluminum bus bars.


1.26 MR Training Complex - T8 & 24 1 Nos.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.



EPIL

Sl.No.

Deptt. Item No.


Rate Amount

1.12 MR Sr Officer Mess

a) Incomer1 No.250A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter,Multifunction meter with communication port, Set of CTs of 250/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.


ii) 8 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAiii) 8 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VA Set 1.00 414000.00 414000

1.14 MR Jr Officer Mess - 149 Rooms a) Incomer1 No.400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter,Multifunction meter with communication port, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.



1.8 MR Inspector / S.I. Residence a) Incomer1 No 125A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 125/5A Class-1, 15 VA.


c) Out goings


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

8 Nos. 40A TPN MCB (10 KA) with M.R. releases, phase indicating lights, CT operated 1phase Dual energy meter, Set ofCTs of 40/5A Class-1, 15 VA.

Set 8.00 230000.00 1840000

1.15 MR Constable Trainee Baracks a) Incomer1 No.400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Setof CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.



1.10 MR Constable Residence (One Bed Room) a) Incomer1 No 100A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 100/5A Class-1, 15 VA.


c) Out goingsi) 8 Nos. 32A DP MCB (10 KA) with M.R. releases, phase indicating lights, CT operated 1phase Dual energy meter, Set of

CTs of 40/5A Class-1, 15 VA. Set 10.00 207000.00 2070000

1.9 MR ASI / Havaldar Family Qtrs a) Incomer1 No 100A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 100/5A Class-1, 15 VA.


c) Out goings


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

i) 8 Nos. 40A DP MCB (10 KA) with M.R. releases, phase indicating lights, CT operated 1 phase Dual energy meter, Set ofCTs of 63/5A Class-1, 15 VA. Set 14.00 207000.00 2898000


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

1.6 MR Director Residence a) Incomer1 No.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Setof CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.

c) Out goings3 Nos 40A TPN MCB (10kA) Set 1.00 96600.00 96600

1.5 MR Guest House a) Incomer1 No.250A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communication port, Set of CTs of 250/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.



1.10 MR Constable Residence (Two Bed Room) a) Incomer1 No 100A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of 100/5A Class-1, 15 VA.


c) Out goingsi) 8 Nos. 40A DP MCB (10 KA) with M.R. releases, phase indicating lights, CT operated 1phase Dual energy meter, Set of

CTs of 40/5A Class-1, 15 VA. Set 10.00 207000.00 2070000


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

1.7 MR Depty. Director Residence a) Incomer1 No.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Set ofCTs of 63/5A Class-1, 15 VA. b) Bus barsSet of 100 A electrolytic aluminum bus bars.

c) Out goings3 Nos 63A TPN MCB (10kA) Set 6.00 82800.00 496800

1.13 MR Jr Officer Mess - Women

a) Incomer

1 No.250A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter,Multifunction meter with communication port, Set of CTs of 250/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.



1.2 MR Training Center - 1B a) Incomer1 Nos. 630A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 630/5A Class-1, 15 VA. b) Bus barsSet of 800 A electrolytic aluminum bus bars.


ii) 5 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAiii) 5 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VAiv) 5 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 464600.00 464600


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

1.2 MR Training Center - 1A a) Incomer1 Nos. 630A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 630/5A Class-1, 15 VA. b) Bus barsSet of 800 A electrolytic aluminum bus bars.






1.17 MR Hospital 1 Nos.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

c) Out goingsi) 3 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VA

ii) 3 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VAiii) 3 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 193200.00 193200

1.3 MR Training Center - 1C a) Incomer1 Nos.250A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 250/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.



1.20 MR Police Station 1 No.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, CT operated 3 phase Dual energy meter, Set ofCTs of 63/5A Class-1, 15 VA. b) Bus barsSet of 100 A electrolytic aluminum bus bars.


ii) 3 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VA Set 1.00 153640.00 153640

1.17 MR Reserve Office 1 Nos.200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.


EPIL

Sl.No.

Deptt. Item No.


Rate Amount


ii) 3 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VAiii) 3 Nos Power Contactor with Digital Astronomical timer switch Set 1.00 193200.00 193200

1.16 MR Utility Building a) Incomer1 No 200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communication port, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.

c) Out goingsi) 18 Nos 32A DP MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VA


1.4 MR Training Center - 1D a) Incomer1 Nos.400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter with communicationport, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 600 A electrolytic aluminum bus bars.




EPIL

Sl.No.

Deptt. Item No.


Rate Amount




Total Sub-head : IV 18783824


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-Head : V L.T. Cables and Cable Trays

Total Sub-head : V


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-head : VI Earthing & Lightning Conductor System

11. M.R Providing and laying GI strip 32x6mm in 50mm GI pipe B class including cost of GI pipe complete as required. Metre 60.00 552.00 33120

Total Sub-head : VI 33120


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub Head - VII : Telephone System

1 M.R. Supplying, drawing of 0.61 sq.mm (3 pair) FR PVC insulated copper conductor, unarmoured telephone cable in existingsurface/ recessed PVC conduit as required Metre 22920.00 60.00 1375200

2 M.R. Providing, fixing in walls including cutting in wall, grouting & finishing, connecting and testing of following pair solderlesstelephone tag blocks mounted in powder coated box of required size with hinged lockable cover and clamps for dressing ofwires etc complete as required.

a) 300 pairs Each 2.00 23000.00 46000b) 100 pairs Each 10.00 13800.00 138000c) 50 pairs Each 14.00 11040.00 154560d) 20 pairs Each 44.00 9200.00 404800e) 10 pairs Each 16.00 8280.00 132480

3 M.R Providing, laying, connecting and testing of multi-core telephone un-armoured cable of conductor size 0.61 mm diaannealed copper conductor PVC insulated PVC sheathed along with wall or ceiling or through existing pipe etc as required.

a) a) 100 pair telephone cable Meter 40.00 1196.00 47840b) b) 50 pair telephone cable Meter 60.00 1288.00 77280c) c) 20 pair telephone cable Meter 1005.00 736.00 739680d) d) 10 pair telephone cable Meter 200.00 414.00 82800

4 M.R Providing, fixing, connecting, testing and commisssioning of zinc passivated box with moulded plate in recess or on surfacemoulded type with following including all necessary materials etc. as required.

a) 2 Pair telephone cord outlet (RJ-11) Each 987.00 299.00 295113

Total Sub-head : VII 3493753


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub Head - VIII : MATV System 1 MR Supplying, fixing of T.V. antennna socket outlet on the modular plate type switch plate with zinc passivated box and along

with modular base & cover plate in recess as required. Each 418.00 419.00 175142

2 MR Supplying and drawing of coaxial T.V cable RG-6 solid copper conductor PE insulated, shielded with fine tinned copperbraid and protected with PVC sheath in the existing surface/recessed PVC conduit as required. Metre 18910.00 143.00 2704130

3 MR Supplying and fixing outlet box with locking arrangement of size 250 x 200 x 100 mm 16 gauge sheet steel in recessed asrequired. Each 93.00 336.00 31248

4 Supplying and fixing of following splitter/tap off with suitable boxes as required.

MR a) 4 way splitter Each 130.00 603.00 78390MR b) Tap off Each 99.00 428.00 42372

Total Sub-head : VIII 3031282


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-head : IX - Fire Alarm & Public Address System

1 MR Supply, Installation, Testing and Commissioning of Microprocessor based intelligent, addressable, modular, networkable,loop expandable upto 4 loops fire alarm control panel with minimum 5.7" graphic touch screen display with soft keys fordisplaying alarm,events and operating functions, Compatible with grafic user interface for pin point identification of the firelocation and fire alarm system control with possibility to double the panel processor for redundancy, Diagnostic functionsfor total current consumption,Day/Night operation function, Remote maintenance service feature etc. The panel shall have240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24hours normal working and then be capable of operating the system for 30 minutes during emergency condition.The panelshall be integrated with public address system.

2 Loop Panel Nos 1.00 736000.00 736000

2 MR Supply, Installation, Testing and Commissioning of Active Repeater panel, capable of networking and monitoring all thedetectors / devices.The Panel have alphanumeric character back lit LCD display with complete function keys forprogramming and control like system reset, alarm acknowledge,alarm silence,trouble acknowledge etc.as per specification.

Nos.

3 MR Supply, Installation, Testing and Commissioning of intelligent plug-in type addressable multisensor Optical / Thermaldetector with in built fault isolator feature (either in detector Head or in detector Base) including the cost of base plate as perdetailled technical specification. (For Critical Areas) Nos. 45.00 6440.00 289800

4 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable Duct detector including the cost ofbase plate.(For AHU Ducts) Nos. 22.00 13800.00 303600

5 MR Supply, Installation, Testing and Commissioning of Addressable Beam detector having transmitter & receiver unitscomplete as required.(For Double Height areas) Nos. 6.00 96600.00 579600

6 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable optical smoke detector with in builtfault isolator feature (either in detector Head or in detector Base) including the cost of base plate.

Nos 236.00 8740.00 20626400

7 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable heat detectors with built in faultisolator feature (either in detector Head or in detector Base) including the cost of base plate. Nos 30.00 11541.00 346230

8 MR Supply, Installation, Testing and Commissioning of Addressable control modules for Sounders, AHU & stairs Pressurization Fan, Access control Integration etc complete as required. Nos 4.00 8280.00 33120


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

9 MR Supply, Installation, Testing and Commissioning of Addressable Monitor Module with minimum of 2 monitoring inputs forsprinkler flow switch ,fire doors,magnetic contacts complete as required. Nos 8.00 8763.00 70104

10 MR Supply, Installation, Testing and Commissioning of Response Indicators complete as requied Nos 8.00 529.00 4232

11 MR Supply, Installation, Testing and Commissioning of Addressable Manual Call Point break glass type with Alarm LEDcomplete. Nos 26.00 5405.00 140530

12 MR Supply, Installation, Testing and Commissioning of Addressable type Base Sounder with the cost of mounting complete asrequired. Nos 20.00 6325.00 126500

13 MR Supply, Installation, Testing and Commissioning of Addressable type Sounder with the cost of mounting complete asrequired. Nos 30.00 8818.00 264540

14 MR Supply, Installation, Testing and Commissioning of Strobe lights with light intensity >2cd shall be synchronised for betterevacuation complete as required. Nos 4.00 8073.00 32292

15 MR Supply, Installation, Testing and Commissioning of 2 x 1.5 sq. mm FRLS, PVC, insulated copper conductor cable. Mtr. 5500.00 152.00 836000

Supply, installation, testing & commissioning of following Control Equipment :

16 MR Central Controller and processor for public address systems with equiped capacity and required interface to connect min 4call station microphone, 4 music sources, 4 aux souces and min 8 zone output as per specification Nos

17 MR Dual Channel Power Amplifier, min 250W per channel, 100 V line output per channel, Front LCD display, Built is DSPprocessor for equalization, 19" rack mountable, programming and monitoring through PC software.(min 10% standby)

Nos

18 MR Professional 19 inch rack mountable multichannel (min 4 channel out) Hard Disk based/SD Card Based MP3 Players(Approved make : BOSE/ Xspat/ Alcorn/Denon/Tascam) Nos

19 MR Equipment Rack 800 mm x 800 mm for housing Central Controller, Amplifiers and Music Source, consisting of mainspanel, climate control, power distribution, cable channel etc as required. As per approved make or equivalent.

Nos

20 Software Supply, installation, testing & commissioning of following:

MR PC Control Software along with Desktop PC of Core 2 Duo , 2 GB Ram, 160 GB HDD, DVD RW, 19" LCD Monitor ,Mouse , Keyboard for complete programming and monitoring of Controller, amplifiers of PA system (Software shouldcompatible to controller and amplifier for achieveing systems requirement and operation)(Approved Make for PC :HP/Dell/IBM) Nos


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Call Stations

21 MR Call Stations with High Quality Condenser Microphone on gooseneck, Keypad /Touch LCD for min 8 zone selection,(Approved make Nos

22 MR 6W Full range Ceiling speaker, saftey EN 60065, Frequency response 70 Hz to 18 KHz, SPL at 1W, 1m 91 dB with builtin LMT. Nos 125.00 5322.00 665250

Car Call ConsoleSupply, installation, testing & commissioning of following:

23 MR Digital Car Call console with press to talk button, clear busy indication housed in metal housing, CAT-6/fiber connectivity.

Cables & AcessoriesSupply, installation, testing & commissioning of following:

24 MR Digital Remote Call station Interface for connecting Car call console with CAT-6/Fiber connectivity. Nos.

25 MR CAT 6 Cable Mtrs 250.00 179.00 44750

26 MR PVC sheathed Two Core Twin Twisted Speaker Cable 48/0.2mm or equivalent AWG in existing conduit/floor channel asper site Mtrs 2500.00 235.00 587500

27 MR Two Core Twin Twisted armoured Speaker Cable 48/0.2mm or equivalent AWG as per site Mtrs 500.00 538.00 269000

Total Sub-head : IX 7391688


EPIL

Sl.No.

Deptt. Item No.


Rate Amount

Sub-head : X - Lifts

1 MR Supplying at site, installation, testing and commissioning of 16 passenger lifts (machine room less), speed 1.5 metre persecond serving Ground to Second Floor (3 landing and 3 stops) approx. 8.4metre travel, suitable for operation on 415 volts,3 phase, 50 cycles, A.C. electric power supply, complete with contral panel, horizontal stainless steel sliding doors, allsafety devices including automatic resque devices, all fixtures with stainless steel face plates/finishes, handrail on three sidesetc. with interior of car as per specification as approved by Owner / Architect complete in all respects including supplying,laying and termination of copper signal cable/communication cable of required size and core from supervisory display panellocated at a central place to each lift control room with supply & fixing of supervisory display panel as per specification.

Nos. 1.00 2760001.00 2760001

Total Sub-head : X 2760001


EPIL

(1C)NSR

1Sub-head : I : Point Wiring

: Rs. 22006.00

2Sub-head : II : Fans & Light Fixtures

: Rs. 2460009.00

3Sub-Head : III - Distribution Boards

: Rs. 303600.00

4Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars

: Rs. 644230.00

5Sub-Head : V L.T. Cables and Cable Trays

: Rs. -

6Sub-head : VI Earthing & Lightning Conductor System

: Rs. -

8Sub Head - VIII : Telephone System

: Rs. 24725.00

9Sub Head - IX : MATV System

: Rs. 5188.00

10Sub-head : XII - Fire Alarm & Public Address System

: Rs. 2074355.00

11Sub-head : XV - Lifts

: Rs. 2760001.00

TOTAL Rs. 8294114.00


Sub Head: A Internal Electrical Works (Confrence Cum Welfare Center)SUMMARY SHEET

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE DISTRICT OF NALANDAVIDE S.O.R. P.H.E. GOVT. OF BIHAR 01.07.2008

PART-VI CONFERENCE-CUM-WELFARE CENTRE (ELECTRICAL)

SUMMARY

EPIL

Sl. No.

Deptt. Item No.

Description Unit Qty. Rate Amount

Sub-head : I : Point Wiring

1 M.R. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recessincluding providing & fixing of moulded plate type 6 pin 25 Amps socket with plug top and single phasemotor starters of the minimum features of current setting over load protection etc as required. (For A.Cpoints ). Each 10 1863 18630

2 M.R. Supplying and fixing 32 Amps, 415Volts, TPN industerial type, Socket outlet with 4 pole and earth,metal enclosed plug top along with 30 Amps 'C' Series, TP MCB in sheet steel enclosure, on surface orin recess with chained metalcover for the socket out let and complete with connections, testing andcommissioning etc. as required. Each 2 1688 3376

3 M.R. Providing, fixing, connecting, testing and commisssioning of Aviation Light including drawing of controlcable complete as required. Each

TOTAL (RS.) 22006

Enginnering Projects (I) Ltd

Sub Head: A Internal Electrical Works (Confrence Cum Welfare Center)SCHEDULE OF QUANTITY ITEMS BASED ON NON-SCHEDULE ITEMS (NSR)

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE DISTRICT OF NALANDAVIDE S.O.R. P.H.E. GOVT. OF BIHAR 01.07.2008

PART-VI CONFERENCE-CUM-WELFARE CENTRE (ELECTRICAL)

Sheet- 1C

A-BPA-CCWC-ELEC-ESTIMATE Page-1

EPIL

Sl. No.

Deptt. Item No.


Sub-head : II : Fans & Light Fixtures

1 AOR1 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coatedcomplete with Electronics ballast, lockable holders and lamp etc. complete as required. Similar to PhilipsCat. No. TMS 122 / 128 HF Each 25 1549 38725

2 AOR2 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated,complete with Electronics ballast, lockable holders and lamp etc. complete as required.Similar to PhilipsCat. No. TMS 122 / 228 HF Each

3 AOR3 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated,complete with dimmable ballast, lockable holders and lamp etc. complete as required.Similar to PhilipsCat. No. TMS 122 / 228 HF Each

4 AOR4 Supply, Installation, testing & commissioning of box type, fluorescent luminaire, powder coated,complete with electronic ballast, lockable holders and lamp etc. complete as required.Similar to PhilipsCat. No. TMS 122 / 254 HF Each

5 AOR5 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with electronic ballast, lockable holders, reflector and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/128 Each

6 AOR6 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with dimmable ballast, lockable holders, reflector and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/128 Each

7 AOR7 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with electronic ballast, lockable holders, reflectors and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/228 Each

8 AOR8 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with Dimmable ballast, lockable holders, reflectors and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/228 Each

9 AOR9 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with electronic ballast, lockable holders, reflectors and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/254 Each


EPIL

Sl. No.

Deptt. Item No.


10 AOR10 Supply, Installation, testing & commissioning of surface/recess type fluorescent luminaire powder coatedcomplete with Dimmable ballast, lockable holders, reflectors and T-5 lamps etc. complete as requiredsimilar to PHILIPS cat no TCS 150/254 Each

11 AOR11 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires completewith electronic ballasts including lamps and all accessories complete with lockable holders etc. completeas required Similar to Philips Cat No. FBH 145/218 HF. Each 200 2634 526800

12 AOR12 Supply, installation, testing and commissioning of 2x18W CFL recessed type light luminaires completewith dimmable ballasts including lamps and all accessories complete with lockable holders etc. completeas required Similar to Philips Cat No. FBH 145/218 HF. Each

13 AOR13 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-T lamp,luminaire with electronic ballast and all accessories of approved colour complete as required similar toPHILIPS cat no FBH 225/226 HF. Each 10 4038 40380

14 AOR14 Supply, Installation, testing & commissioning of recessed type down lighter with 2x42W PL-T lamp,luminaire with electronic ballast and all accessories of approved colour complete as required similar toPHILIPS cat no FBH 225/242 HF. Each 140 4232 592480

15 AOR15 Supply, Installation, testing & commissioning of recess type mirror optics light fixture including 4x14W,T-5 Lamp with electronic ballast complete as required similar to Philips Cat No. TBS 869 / 414 D8 HF

Each 15 4453 66795

16 AOR16 Supply, Installation, testing & commissioning of surface type mirror optics light fixture inclduing4x14W, T-5 Lamp with Dimmable ballast complete as required similar to PHILIPS cat no TBS 814 /414 D8 HF Each

17 AOR17 Supply, Installation, testing & commissioning of surface type mirror optics light fixture inclduing4x14W, T-5 Lamp with electronic ballast complete as required similar to PHILIPS cat no TPS 814 / 414D8 HF Each

18 AOR18 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 2x11W CFL with electronics ballast complete as required similar to PHILIPS cat no FCS 518/211.

Each 38 1110 42180

19 AOR19 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 2x18W CFL with electronics ballast complete as required similar to PHILIPS cat no FCS 518/218.

Each


EPIL

Sl. No.

Deptt. Item No.


20 AOR20 Supply, erection, testing & commisioning of surface type light luminaire mirror light fixture for including 1x14W, T-5 with electronic ballast complete as required similar to PHILIPS cat no TCH 207 HF

Each

21 AOR21 Supply, erection, testing & commisioning of surface type light luminaire for mirror light including1x14W T-5 lamp with electronic ballast complete as required similar to PHILIPS cat no TWG 207 Each 12 853 10236

22 AOR22 Supply, erection, testing & commisioning of surface type light luminaire for mirror light including1x28W, T-5 lamp with electronic ballast complete as required similar to PHILIPS cat no TWG 207(Adrino) Each 20 1073 21460

23 AOR23 Supply, Installation, testing & commissioning of bulk head light fitting complete with glass cover, wireguard, 11 watt compact fluorescent lamp, pressure impregnated copper ballast etc. complete as requiredsimilar to Cat No. Philips FXC 101 Each 24 868 20832

24 AOR24 Supply, erection, testing & commisioning of surface type light luminaire with 20W Ternado lamp,electronic ballast complete as required similar to PHILIPS Cat No ECB 300 Each

25 AOR25 Supply, erection, testing & commisioning of surface type light luminaire with 70W CDM-TD lamp,electronic ballast complete as required similar to PHILIPS Cat No MINI 300 Each

26 AOR26 Supply, erection, testing & commisioning of surface type light luminaire with 150W CDM-TD lamp,electronic ballast complete as required similar to PHILIPS Cat No DBP 300 Each 25 18400 460000

27 AOR27 Supply, erection, testing & commisioning of surface type light luminaire with 23Watt lamp, electronicballast complete as required similar to PHILIPS Cat No FCG 315 Each 4 1835 7340

28 AOR28 Supply, erection, testing & commisioning of surface type wall bracket light luminaire with 24Wattternandolamp, electronic ballast complete as required similar to PHILIPS Cat No EWC 300 (white) Each

29 AOR29 Supply, erection, testing & commisioning of wall mounted holder with 5 Watt CFL lamp complete asrequired of approved make. Each

30 AOR30 Supply, installation, testing and commissioning of Flame Proof light fixture with 2X40W lamp completeas required simillar to Sudhir Cat no. FF/OA//1271. Each

31 AOR31 Supply, installation, testing and commissioning of Flame proof exhuast fan 12", 1440 RPM, 0.2 HPmotor complete as required. Each


EPIL

Sl. No.

Deptt. Item No.


32 AOR32 Supply, Installation, testing & commissioning of recessed type side wall fitiing (New Brick light)complete with 2 x 9W PL lamp, copper ballast, lamps including connection complete as requiredincluding reccessing the same with zinc passivated Aluminium box similar to Wipro Cat No.PSP 42126. Each 142 1996 283432

33 AOR33 Supplying, installation, testing and commissioning of emergency exit light with lamp with chargeablemaintenance free batteries, 2 pin socket. The luminaire shall be complete with initial charge of batterywith one hour backup etc. complete as required. Similar to Legrand Model No. 61730+660874.

Each 20 5230 104600

34 AOR34 Supply, Installation, testing & commissioning of UP & DOWN Lighter, wall mounted complete with1X70 watt lamp, pressure impregnated copper ballast etc. complete as required similar to PHILIPS CatNo CRESSIDA DCP 72 / CDM - T. Each

35 AOR35 Supply, Installation, testing & commissioning of following sizes 1400 rpm sweep ceiling fan completewith double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required.

a) 1200mm Each 15 1564 23460

b) 1400mm Each

36 AOR36 Supply, Installation, testing & commissioning of following sizes of exhaust fan complete with louver,bird screen & with 3 core flexible wire as required. a) 305 mm 900 RPM Each 15 4140 62100

b) 381 mm 900 RPM Each

37 AOR37 Supply, Installation, testing & commissioning of oscillating type 400mm sweep bracket fan includingmounting arrangement and push button speed regulator etc. complete as required. Each 1 4140 4140

38 AOR38 Supply, installation, testing and commissioning of wall mounted electric hand drier consisting of stripheater double centrifugal high speed blower rated for continuous use in summer and winter including 3core flexible wire etc. complete as required. Similar to Kopal Cat. No.R-20. Each


EPIL

Sl. No.

Deptt. Item No.


39 AOR39 Supply and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamp of internal dia 140mm,73 mm height, 3mm thick rim top lid of 1.5mm thick M.S sheet lidss shall be screwed into M.S. box bymeans of 3mm round headed screws, clamps shall be made of 12 mm dia M.S bar bent to be shape asper standard drawing with over all length as 80 cm

Each 15 143 2145

40 AOR40 Supply and fixing of step type electronic fan regulator on existing modular plate switch box includingconnection complete as required. Each 15 552 8280

41 AOR41 Supply, installation, testing and commissioning of ceiling mount movement sensor (standalone) forapplication in toilet etc complete as required, make simillar to philips or equivalent.

Each 18 6808 122544

42 AOR42 Supply, installation, testing and commissioning of ceiling mount dimmable sensor and controller forapplication in office, waiting areas etc including complete control wiring as required, make simillar tophilips Actilume or equivalent.

Each

43 AOR43 Supply, installation, testing and commissioning of ceiling mount fixture coupler for application in office,waiting areas etc including complete control wiring as required, make simillar to philips Actilume orequivalent. Each

44 AOR44 Supply, installation, testing and commissioning of controller for application in office, waiting areas etcincluding complete control wiring as required, make simillar to philips Actilume or equivalent.

Each

45 AOR45 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp fixed to 40mm dia 1 mtr long G.I. pipe fabicated as required and mounted on wall with suitable size clampcomplete as required, make simillar to PHILIPS CAT NO. SGP 301

Each

46 AOR46 Supply, installation, testing and commissioning of light fixture with 70 watt CDM-TD Lamp fixed to 3M long, 75mm dia 'B' class G.I. pipe with 300x300x6mm base plate including supplying and erection ofcement concrete foundation 1:2:4 ( one cement:, 2 coarse sand: 4 stone aggregate 20mm nominal gaugewith pedestal of approved design/drawing. The dimension of foundation shall be 450x450x600mm laidover 100mm thick 600x600mm bed of 1:4:8 concrete with 50mm reducer at top complete as required.make simillar to PHILIPS CAT NO. SGP 301.

Each


EPIL

Sl. No.

Deptt. Item No.


47 AOR47 Supply and erection of Highbay Luminaire closed version with anodized aluminium reflector comprisesof housing, Reflector & Glass Cover light fitting complete with 400watt HPI (plus) BU lamp, pressureimpregnated copper ballast etc.complete as required similar to PHILIPS Cat No HPK - 225/HPI 400 NBwith glass.

Each

48 AOR48 Supply and erection of battery operated emergency light luminaire with 11 watt CFL including providingand fixing maintenance free batteries and battery charger mounted on ceiling/wall complete as requiredand approved by client. Each 8 2760 22080

49 AOR49 Supply, installation, testing and commissioning of ceiling suspended Table Tenis light complete asrequired. Each

50 AOR50 Supply, installation, testing and commissioning of ceiling suspended Billiard light complete as required. Each

51 AOR51 Supply, installation, testing and commissioning of ceiling suspended Chendelier Light fixture completeas required and approved by client. Each

52 AOR52 Supply, installation, testing and commissioning of Aviation light simillar to Philips cat no XGP 400 1 XLED - K2 / RD 240V Each

TOTAL (RS.) 2460009


EPIL

Sl. No.

Deptt. Item No.


Sub-Head : III - Distribution Boards

1 Supplying, installation, testing and commissioning of surface/recess mounting vertical type three poleand neutral, prewired, sheet steel, MCB distribution board 415 volt, dust protected and powder painted,inclusive of 200 amps tinned copper busbar, common netrul link, earth bar, din bar for mounting MCBdetachable gland /knock out plate, and with built in loose wire box, and superior make terminalconnectiors for all adequate size of FR PVC insulated copper conductor upto the terminal of followingway with double door as required

A. 8 WAY SP&N DB i) 1 No. 40 Amps DP MCB+RCCBii) 4 Nos. 6-20 Amp SP MCB as outgoing

B. 12 WAY SP&N DB i) 1 No. 40 Amps DP MCB+RCCBii) 8 Nos. 6-20 Amp SP MCB as outgoing

C. 4 WAY TP&N DB 6 12880 77280i) 1 No. 40 Amps 4P MCB+RCCBii) 12 Nos. 6-20 Amp SP / 3 Nos TP MCB as outgoing

D. 8 WAY TP&N D.B 6 16560 99360i) 1 No. 32 Amps 4 Pole MCB +RCCBii) 24 Nos. 6-32 Amps SP/ 6 Nos TP MCBs as outgoing

E. 12 WAY TP&N D.B. 6 21160 126960i) 1 No. 63 Amps 4P MCB +RCCBii) 36 Nos. 6-20 AMPS SP/ 9 Nos TP MCB outgoing

TOTAL (RS.) 303600


EPIL

Sl. No.

Deptt. Item No.


Sub-Head : IV - MV Panel Boards / Out-door Feeder Pillars

General Notes:

1 ACB:LSIG (Microprocessor Based) releases shall be used for incoming feeders & LSI releases for outgoingbreakers.



4 This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached forreference). If any discrepancy occurs that should be brought to the notice of Client/Consultant beforequoting the price otherwise stringent condition will be deemed to have been considered.

5 All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other than used incontrol circuit.

6 All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases &ON/OFF/Trip / Spring charged/ready to close indicating lamps.






12 Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is afterconsidering all derating factors. (Bus bar sizing calculation to be submitted for approval.)



EPIL

Sl. No.

Deptt. Item No.


14 All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking schemegiven in SLD.





19 Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be provided tocover the same.



22 All MCCBs shall be provided with Thermal Magnetic based over load & Short Circuit releases.Incoming MCCB shall be provided with E/F releases also.


24 All Switchgear used in Starter shall be type-2 coordinated. Contactor rating shall be selected as per theheavy duty KVAR rating of the capacitor bank from capacitor duty contactor range. Vendor to furnishthe type-2 coordination chart and capacitor duty contactor selection chart.

25 Control supply in main LT Panel will be 24V DC & 230V Ac/24V DC control unit will be provided inthe panel as required.

26 All energy meters supplied shall be Post Paid Dual type single/three phase as required simillar to Secuermake.


EPIL

Sl. No.

Deptt. Item No.


1 MV Panel BoardsMR Supply, erection, testing and commissioning of LT Panels fabricated out of 2mm thick CRCA sheet

steel, dust and vermin proof with reinforcement of suitable size angle iron, fully compartmentalizedcubical type (folded joints construction), floor mounted, totally enclosed, extendable on both sides,switch board suitable for use on 415V, 3 phase 4 wire, 50 c/s system having 50 KA fault capacity,housed with incoming and outgoing aluminum bus bars, interconnection, interlocking between feedersetc. with indicating lamps, push buttons, necessary accessories, all feeders protection & meterscompatible to PC/PLC/BMS with communication port RS-485 etc. including supply and fixing of basechannels of 100x50x6mm as required and with following incoming and outgoing switchgears withprotection and metering etc. as per specification and schematic diagram and provision to be made forinterfacing with BMS etc. complete as required.

1.21 MR Confrence cum Welfare Center

1 Nos.800A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 800/5A Class-1, 15 VA. b) Bus barsSet of 1000 A electrolytic aluminum bus bars.

c) Out goingsi) 2 Nos.630A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of

630/5A Class-1, 15 VA.ii) 3 Nos.250A TPN MCCB (50 KA) with M.R. releases, Ameter with selector switch, Set of CTs of

250/5A Class-1, 15 VA.iii) 6 Nos 40A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 40/5A Class-1, 15 VAiv) 6 Nos 63A TPN MCB (10kA), Ameter with selector switch, Set of CTs of 63/5A Class-1, 15 VA Set 1 644230 644230

Total (in Rs.) 644230


EPIL

Sl. No.

Deptt. Item No.


Sub-Head : V L.T. Cables and Cable Trays

Total (in Rs.)


EPIL

Sl. No.

Deptt. Item No.


Sub-head : VI Earthing & Lightning Conductor System

TOTAL (RS.)


EPIL

Sl. No.

Deptt. Item No.


1 M.R. Supplying, drawing of 0.61 sq.mm (3 pair) FR PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed PVC conduit as required

Metre

2 M.R. Providing, fixing in walls including cutting in wall, grouting & finishing, connecting and testing offollowing pair solderless telephone tag blocks mounted in powder coated box of required size withhinged lockable cover and clamps for dressing of wires etc complete as required.

a) 300 pairs Eachb) 100 pairs Eachc) 50 pairs Each 1 11040 11040d) 20 pairs Each 1 9200 9200e) 10 pairs Each

3 M.R Providing, laying, connecting and testing of multi-core telephone un-armoured cable of conductor size0.61 mm dia annealed copper conductor PVC insulated PVC sheathed along with wall or ceiling orthrough existing pipe etc as required.

a) a) 100 pair telephone cable Meterb) b) 50 pair telephone cable Meterc) c) 20 pair telephone cable Meterd) d) 10 pair telephone cable Meter

4 M.R Providing, fixing, connecting, testing and commisssioning of zinc passivated box with moulded plate inrecess or on surface moulded type with following including all necessary materials etc. as required.

a) 2 Pair telephone cord outlet (RJ-11) Each 15 299 4485


Sub Head - VIII : Telephone System


EPIL

Sl. No.

Deptt. Item No.


1 MR Supplying, fixing of T.V. antennna socket outlet on the modular plate type switch plate with zinc

passivated box and along with modular base & cover plate in recess as required.Each 4 419 1676

2 MR Supplying and drawing of coaxial T.V cable RG-6 solid copper conductor PE insulated, shielded withfine tinned copper braid and protected with PVC sheath in the existing surface/recessed PVC conduit asrequired. Metre

3 MR Supplying and fixing outlet box with locking arrangement of size 250 x 200 x 100 mm 16 gauge sheetsteel in recessed as required. Each 2 336 672

4 Supplying and fixing of following splitter/tap off with suitable boxes as required.

MR a) 4 way splitter Each 4 603 2412MR b) Tap off Each 1 428 428

Total (in Rs.) 5188

Sub Head - IX : MATV System


EPIL

Sl. No.

Deptt. Item No.


Sub-head : XII - Fire Alarm & Public Address System

1 MR Supply, Installation, Testing and Commissioning of Microprocessor based intelligent, addressable,modular, networkable, loop expandable upto 2 loops fire alarm control panel with minimum 5.7"graphic touch screen display with soft keys for displaying alarm,events and operating functions,Compatible with grafic user interface for pin point identification of the fire location and fire alarmsystem control with possibility to double the panel processor for redundancy, Diagnostic functions fortotal current consumption,Day/Night operation function, Remote maintenance service feature etc. Thepanel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acidmaintenance free batteries sufficient for 24 hours normal working and then be capable of operating thesystem for 30 minutes during emergency condition.The panel shall be integrated with public addresssystem.

2 Loop Panel Nos 1 736000 736000

2 MR Supply, Installation, Testing and Commissioning of Active Repeater panel, capable of networking andmonitoring all the detectors / devices.The Panel have alphanumeric character back lit LCD display withcomplete function keys for programming and control like system reset, alarm acknowledge,alarmsilence,trouble acknowledge etc.as per specification. Nos.

3 MR Supply, Installation, Testing and Commissioning of intelligent plug-in type addressable multisensorOptical / Thermal detector with in built fault isolator feature (either in detector Head or in detector Base)including the cost of base plate as per detailled technical specification. (For Critical Areas)

Nos. 10 6440 64400

4 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable Duct detectorincluding the cost of base plate.(For AHU Ducts) Nos. 5 13800 69000

5 MR Supply, Installation, Testing and Commissioning of Addressable Beam detector having transmitter &receiver units complete as required.(For Double Height areas)

Nos. 2 96600 193200

6 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable optical smokedetector with in built fault isolator feature (either in detector Head or in detector Base) including the costof base plate. Nos 41 8740 358340


EPIL

Sl. No.

Deptt. Item No.


7 MR Supply, Installation, Testing and Commissioning of Intelligent plug-in type addressable heat detectorswith built in fault isolator feature (either in detector Head or in detector Base) including the cost of baseplate. Nos 5 5244 26220

8 MR Supply, Installation, Testing and Commissioning of Addressable control modules for Sounders, AHU &stairs Pressurization Fan, Access control Integration etc complete as required.

Nos 1 5704 5704

9 MR Supply, Installation, Testing and Commissioning of Addressable Monitor Module with minimum of 2monitoring inputs for sprinkler flow switch ,fire doors,magnetic contacts complete as required.

Nos 2 5520 11040

10 MR Supply, Installation, Testing and Commissioning of Response Indicators complete as requied Nos 2 529 1058

11 MR Supply, Installation, Testing and Commissioning of Addressable Manual Call Point break glass typewith Alarm LED complete. Nos 3 5405 16215

12 MR Supply, Installation, Testing and Commissioning of Addressable type Base Sounder with the cost ofmounting complete as required. Nos 5 6325 31625

13 MR Supply, Installation, Testing and Commissioning of Addressable type Sounder with the cost ofmounting complete as required. Nos 10 8818 88180

14 MR Supply, Installation, Testing and Commissioning of Strobe lights with light intensity >2cd shall besynchronised for better evacuation complete as required. Nos 1 8073 8073

15 MR Supply, Installation, Testing and Commissioning of 2 x 1.5 sq. mm FRLS, PVC, insulated copperconductor cable. Mtr. 1000 152 152000

Supply, installation, testing & commissioning of following Control Equipment :

16 MR Central Controller and processor for public address systems with equiped capacity and required interfaceto connect min 4 call station microphone, 4 music sources, 4 aux souces and min 8 zone output as perspecification Nos

17 MR Dual Channel Power Amplifier, min 250W per channel, 100 V line output per channel, Front LCDdisplay, Built is DSP processor for equalization, 19" rack mountable, programming and monitoringthrough PC software.(min 10% standby) Nos


EPIL

Sl. No.

Deptt. Item No.


18 MR Professional 19 inch rack mountable multichannel (min 4 channel out) Hard Disk based/SD Card BasedMP3 Players (Approved make : BOSE/ Xspat/ Alcorn/Denon/Tascam) Nos

19 MR Equipment Rack 800 mm x 800 mm for housing Central Controller, Amplifiers and Music Source,consisting of mains panel, climate control, power distribution, cable channel etc as required. As perapproved make or equivalent. Nos

20 Software Supply, installation, testing & commissioning of following:

MR PC Control Software along with Desktop PC of Core 2 Duo , 2 GB Ram, 160 GB HDD, DVD RW, 19"LCD Monitor , Mouse , Keyboard for complete programming and monitoring of Controller, amplifiers ofPA system (Software should compatible to controller and amplifier for achieveing systems requirementand operation)(Approved Make for PC : HP/Dell/IBM)

Nos

Call Stations

21 MR Call Stations with High Quality Condenser Microphone on gooseneck, Keypad /Touch LCD for min 8zone selection, (Approved make Nos

22 MR 6W Full range Ceiling speaker, saftey EN 60065, Frequency response 70 Hz to 18 KHz, SPL at 1W, 1m91 dB with built in LMT. Nos 25 5322 133050

Car Call ConsoleSupply, installation, testing & commissioning of following:

23 MR Digital Car Call console with press to talk button, clear busy indication housed in metal housing, CAT-6/fiber connectivity.

Cables & AcessoriesSupply, installation, testing & commissioning of following:

24 MR Digital Remote Call station Interface for connecting Car call console with CAT-6/Fiber connectivity. Nos.

25 MR CAT 6 Cable Mtrs 50 179 8950

26 MR PVC sheathed Two Core Twin Twisted Speaker Cable 48/0.2mm or equivalent AWG in existingconduit/floor channel as per site Mtrs 500 235 117500

27 MR Two Core Twin Twisted armoured Speaker Cable 48/0.2mm or equivalent AWG as per site Mtrs 100 538 53800



EPIL

Sl. No.

Deptt. Item No.


Sub-head : XV - Lifts

2 MR Supplying at site, installation, testing and commissioning of 16 passenger lifts (machine room less),speed 1.5 metre per second serving Ground to Second Floor (3 landing and 3 stops) approx. 8.4metretravel, suitable for operation on 415 volts, 3 phase, 50 cycles, A.C. electric power supply, complete withcontral panel, horizontal stainless steel sliding doors, all safety devices including automatic resquedevices, all fixtures with stainless steel face plates/finishes, handrail on three sides etc. with interior ofcar as per specification as approved by Owner / Architect complete in all respects including supplying,laying and termination of copper signal cable/communication cable of required size and core fromsupervisory display panel located at a central place to each lift control room with supply & fixing ofsupervisory display panel as per specification.

Nos. 1 2760001 2760001

Total (in Rs). 2760001


EPIL

(1C)

NSR

Sub Head - I - Street Lighting : Rs. 14,819,912.00

Sub Head - II - Out-door Feeder Pillars : Rs. 3,513,756.00

Sub Head - III - L.T. Cables & Control Cables : Rs. -

Sub-head - V - Post Paid Metering : Rs. 1,530,400.00

Sub-Head - VI - MV Panel Boards : Rs. 15,601,480.00

Sub-Head - VII - Silent Type D.G Set : Rs. 9,016,004.00

Sub-Head - VIII - Earthing : Rs. 1,007,660.00

Sub-Head - IX - Miscellaneous Items : Rs. 105,570.00

TOTAL Rs. 45,594,782.00

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE DISTRICT OF NALANDAVIDE S.O.R. C.P.W.D.

PART- XIX EXTERNAL ELECTRICAL

Engineering Projects (I) ltd

SUMMARY SHEET

SUMMARY

EPIL

Sl. No.

Deptt. Item No.

Description Unit Qty. Rate Rate

Amount

Sub Head - I - Street Lighting1 M.R Supply, Erection, Testing & Commissioning of G.I. Octagonal Pole of following length with G.I. base plate of 20mm

thick, cut out box with loop in loop out facility with SP MCB, Hylam/backelite sheet of 10 mm thick, 12 way 63 Ampconnector and accessories including wiring with 3 x 2.5 sq mm pvc insulated copper wire from control gear box toloop in loop out box, 2 nos 50 mm dia G.I. Pipe B class with suitable bend, as shown in the drawing. The pole shallalso be provided with flush door at the bottom with proper strengthning to the cutout of the door opening. The poles tobe erected on cement concrete pedestal R.C.C in 1:2:4 of size 900mm x 900mm x 1700 mm (depth) including cost ofproviding & fixing of materials for cement concrete foundation & excavation in soil as per site condition and makinggood the same, G.I. foundation bolts of suitable size including Anchore plate & Template complete as required. Makeof the Pole simillar to Bajaj Electrical / Schreder / Utkarsh or rquivalent as approved by client.

a) 9 mtr long Pole 4 mm thick Each 110 26680 2934800

Sheet- 1C


Sub Head: B External Electrical Works

SCHEDULE OF QUANTITY ITEMS BASED ON NON-SCHEDULE ITEMS (NSR)

BILL OF QUANTITY FOR THE CONSTRUCTION OF POLICE ACACDEMY AT RAJGIR IN THE DISTRICT OF NALANDA

PART- XIX EXTERNAL ELECTRICAL

a) 9 mtr long Pole, 4 mm thick Each 110 26680 2934800b) 6 mtr long Pole, 4 mm thick Each 195 19320 3767400

2 M.R Supply, erection, testing and commissioning of G.I. bracket of following sizes suitable for mounting on G.I.Hectagonal Poles complete as required simillar to make Bajaj or Equivalent and approved by client.

a) Single bracket of 500mm long Each 300 1012 303600b) Single bracket of 1500mm long Each 110 1840 202400

3 M.R Supply, erection, testing and commissioning of Light Fixture with 70 watt CDM-T Lamp complete as requiredsimillar to Philips cat no SGP 301 or equivalent as approved by client. Each 410 6900 2829000

4 M.R Supply, installation, testing and commissioning of 2x400W HPI -T flood light luminaries with reflector, HPI lamp(TUBULAR type), ballast and control gear etc similar to Phillips catalogue ref. - RVP 501/2XHPI-T 400W. set 172 22908 3940176

5 M.R Supply, installation, testing and commissioning of 400W SON -T flood light luminaries with reflector, lamp, ballastand control gear etc similar to Phillips cat ref. SWF 330 with SON-T 400W lamp. set 12 8464 101568

A-BPA-EXT-ELEC-ESTIMATE Page-1

EPIL

Sl. No.

Deptt. Item No.


Amount

6 M.R Supply, installation, testing and commissioning of 250W SON -T flood light luminaries with reflector, lamp, ballastand control gear etc similar to Phillips cat ref. SWF 330 with SON-T 250W lamp. set 4 8280 33120

7 M.R Supply, installation, testing and commissioning of 250W SON -T flood light luminaries with reflector, lamp, ballastand control gear etc similar to Phillips cat ref. SLF 125 with SON-T 250W lamp. Each 2 8924 17848

8 M.R Supply, Erection, Testing & Commissioning of following lengths, Polygonal, 3 sections, thickness 5/4/4 with lanterncarriage, suitable for fixing of luminaries in tiers, hoisting arrangement using 2/3 nos. steel wire rope, gear box,control panel, flexible copper multi core cable of 2.5 sqmm size etc, electric tool of 3kw rating capable of operating at230V, 50HZ, A.C supply along with reduction gear for lower and raising lantern crriage of High Mast includingluminary setting arrangement, proper aiming, lightning arrestor including foundation as per manufacturerrecomendation complete as required. Control panel for automatic switching ON and OFF of the high mast shall alsohave suitable controls for operation of Power Tool to be erected on suitable foundation. Make simillar to BajajElectrical / Schreder / Utkarsh or as approved by client.

a) 25 Mtr high mast Set 1 690000 690000

Total (in Rs.) 14819912


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub Head - II - Out-door Feeder Pillars

1 Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin proof Feeder Pillars with IP 55 ingress protection, fabricated from 2 mm thick CRCA sheets, hinged, gaskettedand lockable doors including the cost of interconnections copper crimping lugs, 3mm thick gland plate, aluminiumbus-bars, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system with 50kA fault level including supply and fixingof base channels of 100x50x6mm as required and with following incoming and outgoing switchgear as perspecification and schematic diagram

All energy meters supplied shall be Post Paid Dual type single/three phase as required simillar to Secuer make.

1.1 Constable Residence - 1Bed Room

A. INCOMING1 No 400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. B. Bus barsSet of 600 A electrolytic aluminum bus bars.

C. OUTGOING 12 Nos.100A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set ofCTs of 100/5A Class-1, 15 VA Set 1 362112 362112

1.2 MR Constable Residence - 2 Bed Room

A. INCOMING 1 No 400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. B. Bus barsSet of 600 A electrolytic aluminum bus bars.

C. OUTGOING 12 Nos.125A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set ofCTs of 125/5A Class-1, 15 VA Set 1 399740 399740

1.3 MR ASI/HAVELDAR Family Quartersa) Incomer


EPIL

Sl. No.

Deptt. Item No.


Amount

1 No 400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 600 A electrolytic aluminum bus bars.

c) Out goings9 Nos.100A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set ofCTs of 100/5A Class-1, 15 VA Set 1 262016 262016

1.4 MR Inspector / S.I. Residencea) Incomer1 No 400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 600 A electrolytic aluminum bus bars.


1.5 MR Deputy Director Residencea) Incomer1 No 200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 200/5A Class-1, 15 VA. b) Bus barsSet of 300 A electrolytic aluminum bus bars.


1.6 MR Misc. Feeder Pillar - I a) Incomer1 No 200A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 200/5A Class-1, 15 VA.


EPIL

Sl. No.

Deptt. Item No.


Amount


c) Out goingsi) 6 Nos.100A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of

CTs of 100/5A Class-1, 15 VAii) 2 Nos.125A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of

CTs of 125/5A Class-1, 15 VAiii) 2 Nos.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of CTs

of 63/5A Class-1, 15 VA Set 1 281888 281888

1.7 MR Misc. Feeder Pillar - II a) Incomer1 No 400A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 600 A electrolytic aluminum bus bars.

c) Out goings) g gi) 6 Nos.100A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of



CTs of 250/5A Class-1, 15 VAiii) 5 Nos.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of CTs

of 63/5A Class-1, 15 VA Set 1 424304 424304

1.8 MR Misc. Feeder Pillar - III a) Incomer1 No 250A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Multifunction meter withcommunication port, Set of CTs of 400/5A Class-1, 15 VA. b) Bus barsSet of 400 A electrolytic aluminum bus bars.


EPIL

Sl. No.

Deptt. Item No.


Amount

c) Out goingsi) 15 Nos.63A TPN MCCB (50 KA) with M.R. releases, phase indicating lights, Ameter with selector switch, Set of

CTs of 63/5A Class-1, 15 VA Set 1 403880 403880

1.9 M.R. External Lighting Feeder Pillar - I, II, III, IVIncomer1 No. 200 A TPN MCCB ( 50 KA ) with M.R. releases and phase indicating lamps.1 No. 100 A TPN MCCB ( 50 KA ) with M.R. releases and phase indicating lamps.Photocell / PIR located above panel3 Nos. 200A TP power contactor with 3 Nos digital astronomical time switch

Outgoing

20 Nos. 32A TPN MCB

2 Nos. 63A TPN MCB Set 4 205436 821744



EPIL

Sl. No.

Deptt. Item No.


Amount

Sub Head - III - L.T. Cables & Control Cables

Total (in Rs.)


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub-head - V - Post Paid Metering

1 Supplying, installing, testing & commissioning of the following field devices complete as required.

1.1 M.R Meter Reading Instrument Nos 1 82800 82800

1.2 M.R Smart 2K software for centralized billing system. Nos 1 138000 138000

1.3 M.R SMPS Nos 15 3680 55200

1.4 M.R Two core 1.5 square mm copper conductor wire – SMPS to Meters Meter 2000 44 88000

1.5 M.R Two core 2.5 square mm multistrand copper conductor armoured control cable – DG to SMPS Meter 7500 150 1125000

1.6 M.R PC with 2GB Ram, 200 GB Hardisk, Oracle Client, CD Drive USB Ports of Standard Make. UPS of 500 VA with 15min, backbup, A-3 laser jet printer. Nos 1 41400 41400

Total (in Rs). 1530400


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub-Head - VI - MV Panel Boards

General Notes:

1 ACB:LSIG (Microprocessor Based) releases shall be used for incoming feeders & LSI releases for outgoing breakers.



4 This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). Ifany discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwisestringent condition will be deemed to have been considered.

5 All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other than used in control circuit.

6 All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases & ON/OFF/Trip /Spring charged/ready to close indicating lamps.p g g y g p






12 Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is after considering all deratingfactors. (Bus bar sizing calculation to be submitted for approval.)



EPIL

Sl. No.

Deptt. Item No.


Amount

14 All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking scheme given in SLD.





19 Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be provided to cover the same.



22 All MCCBs shall be provided with Thermal Magnetic based over load & Short Circuit releases. Incoming MCCBshall be provided with E/F releases also.


24 All Switchgear used in Starter shall be type-2 coordinated. Contactor rating shall be selected as per the heavy dutyKVAR rating of the capacitor bank from capacitor duty contactor range. Vendor to furnish the type-2 coordinationchart and capacitor duty contactor selection chart.

25 Control supply in main LT Panel will be 24V DC & 230V Ac/24V DC control unit will be provided in the panel asrequired.

26 All energy meters supplied shall be Post Paid Dual type single/three phase as required simillar to Secuer make.


EPIL

Sl. No.

Deptt. Item No.


Amount

1 MV Panel Boards

MR Supply, erection, testing and commissioning of LT Panels fabricated out of 2mm thick CRCA sheet steel, dust andvermin proof with reinforcement of suitable size angle iron, fully compartmentalized cubical type (folded jointsconstruction), floor mounted, totally enclosed, extendable on both sides, switch board suitable for use on 415V, 3phase 4 wire, 50 c/s system having 50 KA fault capacity, housed with incoming and outgoing aluminum bus bars,interconnection, interlocking between feeders etc. with indicating lamps, push buttons, necessary accessories, allfeeders protection & meters compatible to PC/PLC/BMS with communication port RS-485 etc. including supply andfixing of base channels of 100x50x6mm as required and with following incoming and outgoing switchgears withprotection and metering etc. as per specification and schematic diagram and provision to be made for interfacing withBMS etc. complete as required.


EPIL

Sl. No.

Deptt. Item No.


Amount

1.1 Main LT Panela) IncomerTransformer Incomer feeders - 2 nos & shall be equipped as:

1 No. 3200A, 4 pole, drawout type electrically operated intelligent air circuit breaker with 240V A.C. spring chargedmotor and micro processor based O/C, S/C & E/F releases with (IDMTL + Hi-set ) communication port compatiblewith PLC/ PC / BMS etc.

1 No. 24V D.C. shunt release1 No. 240V A.C.closing coil1 No. 415V A.C. under/over voltage release.1 No. Multifunction meters with communication port RS-485 compatible with BMS.3 nos CTs 3200/5A , 15 VA , Class - 1 for metering1 Set Breaker Control Switch. ( TNC )1 Set Auto-Off- Manual Switch1 Set push buttons1 no Master trip relay1 Set NCT of class 5P201set CTs 4000/5A, 15 VA, Class - 1 for capacitor banks.VISUAL INDICATIONPhasesBreaker ON-OFF-TRIP & trip ckt healthyp ySpring charged/dischargedLoad on mains

b) Bus BarsSet of 4000 A electrolytic aluminum bus bars.

c) Bus Couplers Feeder - 1 No. & shall be equipped as 3200A, 4 pole, drawout type electrically operated intelligent air circuit breaker with 240V A.C. spring charged motorwith communication port compatible with PLC/ PC / BMS etc

1 No. 240V A. C, closing coil1 Set Auto off manual switch.1 Set Breaker Control switch.( TNC)VISUAL INDICATIONPhasesBreaker ON - OFF - TRIP & trip ckt healthy


EPIL

Sl. No.

Deptt. Item No.


Amount

Spring charged / discharged


EPIL

Sl. No.

Deptt. Item No.


Amount

d) DG Incomer - 4 Nos. & each shall be equipped as :-

1 No. 1000 Amps, 4 pole, drawout type electrically operated air circuit breaker 240V AC spring charging motor microprocessor based O/C, S/C & E/F releases with communication Port compatible with PLC/PC/BMS.

1 No. 24V DC shunt release.1 No. 240V Ac closing coil.1 No. 415V A.C. under/over voltage release.1 No. Multifunction meters with communication port RS-485 compatible with BMS.1 no Master trip relay3 Nos. CTs 1000/5A Class 1.0 for metering.1 Set PT 415/root3 V/ 110/root3 V 100 VA ; class 1.01 No. Breaker control switch.1 Set Auto-off Manual Switches1 set push buttonsVisual Indication Phase indicationBreaker ON-OFF-Trip-Trip ckt healthySpring charged/DischargedLoad on DG Sets

Note Interlocking between Transformers DG Sets and bus couplers shall be providedNote Interlocking between Transformers, DG Sets and bus-couplers shall be provided.

e) Outgoing Feeders

2 Nos. 63A Amps 4 Pole MCCB with M.R. releases for O/C, S/C & E/F. 1 Set of ON, Off , Trip & control supplyhealthy indicating lamps, Multifunction meter with set of CTs with communication port compatible with PLC/ PC /BMS etc.




EPIL

Sl. No.

Deptt. Item No.


Amount



3 Nos. 630A Amps 4 Pole MCCB with M.R. releases for O/C, S/C & E/F, 1 Set of ON, Off , Trip & control supplyhealthy indicating lamps, Multifunction meter with set of CTs with communication port compatible with PLC/ PC /BMS etc.


3 Nos.1600A Amps 4 Pole EDO type ACB with M.R. releases for O/C, S/C & E/F. (Shunt trip/closing coil 24VDC/240V AC), 1 Set of ON, Off, Trip & control supply healthy indicating lamps & breaker control switch,Multifunction meter with set of CTs with communication port compatible with PLC/ PC / BMS etc.

Set 1 7704911 7704911

1.2 M.R. Same as item 1 but with Designing, fabricating, assembling, supplying, erecting, testing and commissioning of powercommand controller (similar to Cummins model PCC-3100) based AMF, Auto load sharing, auto load managementthrough PLC. PLC shall also operate all DG Incomer, Transformer incomer, bus coupler with programmed operationsas described in the Specifications complete as required. (PLC LOGIC CONTROL PANEL)

1nos. SLC 5/03 Processor 3nos. 32 Ch. Digital I/P Module3nos. 32 Ch. Digital O/P Module 1nos. 10 Slot I/O Rack1nos. Rack Power Supply1nos. EEPROM1nos. Window based Grafix Software Package1lot. Comm. Cable1lot. Cable & Accessories


EPIL

Sl. No.

Deptt. Item No.


Amount

Above system components shall be housed in a control panel fabricated out of 2mm thick CRCA sheet cubiclecomplete with all accessories as per requirement, with relay modules with operation interface with Dual CoreComputer with 160 GB HDD, Combo Drive, 19" TFT Colour Monitor, A-3 size Colour Printer of Hp, 110 KeysKeyboard & mouse etc. communicable cable, graphic station software, at least 2 KVA UPS backup by maintenancefree batteries, PLC to PC communication card. The system should be suitable for controlling all DG breakers,transformer breakers, bus couplers and outgoings in Main LT Panel as required and as per the inter locking scheme inthe drawings.

NOTES:All required devices for inputs to and outputs from the PLC whether digital or analog required to operate the DG Setsand accessories as specified should be included in design and costing

BOQ given above is does not limit the bidder from including all such components as are necessary for proper and safeAMF, synchronizing and load sharing in both manual as well as Auto & PLC mode.

Only Space shall be provided for 3rd, 4th, 5th & 6th D.G. Set in PLC Control panel.

Automatic Mode

While the normal mains supply is healthy the diesel alternator set will be at rest and the load will be supplied by themains. During this period, all the bus couplers will be in open position.

The PLC system shall monitor the main supply voltage & if the main supply voltage drops below a certain presetvalue, the system shall sense these conditions & shall give automatic start command to the control system.

After a time delay of 1.5 seconds from the main supply failure the diesel engine shall start.

When the DG set attains its rated speed and voltage a closing signal shall be given to the ACB of the DG set.

Before giving CLOSE command to ACB of DG set. The bus couplers will be given CLOSE command. At this pointof time all the load will be on one DG.

Now the system will continuously monitor the total load on the DG system. If the load is more than the capacity ofrunning DG, the another DG set will receive START command and come in line to share the load.

The incoming DG will get synchronised with the running DG and all the DG's will share the load equally.


EPIL

Sl. No.

Deptt. Item No.


Amount

Depending on the total load on the DG system PLC will control the no. of DG sets running at any time. SO PLC willoptimise the no. of DG sets running. (in operation)

When the voltage in the mains get restored, its quality is monitored for about one minute and if proven satisfactory themain supply breaker shall close automatically for retransfer of the load from Diesel engine to the main supply at L.T.Panel but prior to this operation all DG's breakers & bus coupler should open & vice-a-versa. At this time, all the buscoupler will be in OPEN position before the Mains ACB is CLOSED.

The set shall stop after idle running of one minute after restoration of main supply.

The diesel alternator set reverts to its standby conditions and is ready to start should the mains supply fail again.

SEQUENCE OF OPERATION (PLC)AUTOSTART, AUTOSYNCHRONIZINGAUTO LOAD SHARING AND LOAD MANAGEMENT

On failure of GRID Supply All grid ACB's shall be switched Off. And all BUS COUPLER ACB's shall be SwitchedON automatically.On failure of Grid supply DG-1 shall start automatically & close its ACB/NIC & shall Start Feeding the Load.

On attaining the preset load the DG - 2 shall start automatically.

Voltage & Frequency of DG-2 shall be monitored & necessary commands shall adjust the parameters of DG -2 withBUS.

AUTO Synchronizing System shall verify the phase angle of both running sets & also compensate for ACB closingtime by initiating closing of the breaker ahead of the actual predictable synchronism thereby ensuring a phasedifference of zero degree.

System shall also monitor the slip frequency and the Beat voltage of the machine or system.

The above shall be followed for DG - 3, 4

Neutral Isolating Contactor (NIC) of first DG shall remain in ckt. In case of manual tripping or tripping of DG setunder fault condition NIC of any other DG shall close first before tripping NIC of first set.

It shall be possible to alter sequence of DG set starting through manual selectors or through Man Machine Interface.


EPIL

Sl. No.

Deptt. Item No.


Amount

Active power is made equal on both the machines automatically with the help of ACTIVE LOAD BALANCINGSystem through Governor control.

Reactive power is balanced automatically with the help or quadrature droop kit already fitted on the machine.

However if quadrature droop system is not functioning accurately, REACTIVE LOAD BALANCING SYSTEM shallcontrol the motorised Potentiometers to achieve KVAR regulation within preset Band.

In event of set failing to synchronize, Alarm from Annunciator would invite attention of OPERATOR for ManualIntervention.

LOAD MANAGEMENT SYSTEM shall have 6 output contacts for tripping various loads by field wiring and alsotrip the ACB of different DG sets and give ALARM for shutting OFF DG in accordance with predefined parametersto avoid underloading, over loading, cascading effect of tripping & unnecessary FUEL WASTAGE.

On Restoration of GRID Supply, DG ACB's & Bus Coupler ACB shall be switched OFF preset sequence with timedelays to cover DIPS & Grid supply ACB's shall be switched ON. DG sets shall continue to run for 3 minutes afterDG ACB has been switched OFF.

It shall be possible to alter crucial settings / time delays through. MAN MACHINE INTERFACE.

PLC, Annunciation System, Protection system & metering system shall have compatibility for interface with PC forGraphic Displays/Report Generation.SYSTEM shall have semi auto mode & TOTAL MANUAL OVERRIDE.Manual Synchronising with all required accessories and protection including Synchronising check relay. Set 1 1706693 1706693

1.3 M.R. CAPACITOR PANEL 800 KVAR.

1 No 1600 A TPN MCCB (50kA) with microprocessor based releases for O/C, S/C and E/F protection withcommunication port compatible with PLC/ PC / BMS etc.1 No. Multifunction Meter with communication port RS-485 compatible with BMS1 Set of control fuses with 3 Nos. Phase indication lights

Bus BarsSet of 5000 A electrolytic aluminum bus bars.

Outgoings


EPIL

Sl. No.

Deptt. Item No.


Amount

5 Sets of 250 Amp TP MCCB (50kA) with 225 A TP capacitor duty contactor with 230 V A.C. supply (Suitable for50 KVAR capacitor bank).

7 Sets of 125 Amp TP MCCB (50kA) with 110 A TP capacitor duty contactor with 230 V A.C. supply (Suitable for50 KVAR capacitor bank).

5 Sets of 63 Amp TP MCCB (50kA) with 70 A TP capacitor duty contactor with 230 V A.C. supply (Suitable for 25KVAR capacitor bank).

16 Sets self illuminated Red-Green (ON-OFF) push buttons

4 Nos.100 KVAR TP shunt capacitor (MPPXL) with 7% harmonic filter & discharge resistor.

6 Nos. 50 KVAR TP shunt capacitor (MPPXL) with 7% harmonic filter & discharge resistor.

4 Nos. 25 KVAR TP shunt capacitor (MPPXL) with 7% harmonic filter & discharge resistor.

1 No.12 step APFC Relay with binary operation with communication port RS-485 compatible with BMS.

1 No. selector switch for auto-off manual Set 2 1928321 3856642

1.4 M.R. SOLAR PANEL

A. INCOMER100 A 4P Automatic Change Over Switch as incomer - 1 No.100 A 4P MCCB (35 KA) as incomer - 1 No.3 Nos. Time switch programmeable type (0-24) hour with 3 NO and 3 NC contact setting3 Nos. DP motor duty contactor with NO-NC contact and 230 V A.C. coil2 Set of indicating lights

B. INSTRUMENTSi) 1 No. Voltmeter (0-500V) with selector switch and control fusesii) 3 Nos. CT's 100A/5A accuracy Class-I,15 VAiii) 1 No. Ammeter with ASS iv) Phase indication lights

C. OUTGOING:100/32 Amp TPN MCCB 35 KA - 2 Nos


EPIL

Sl. No.

Deptt. Item No.


Amount

1 Set Phase indication light LED type with protection fuse Set 4 153088 612352

1.5 M.R. FIRE PUMP PANELIncomer 1 No. 400 A TPN MCCB ( 35 KA ) with M.R. releases and phase indicating lamps.1 Set Digital Ammeter with selector switch of suitable range & with three nos of CTs 1 No. Digital Voltmeter 0-500V with selector switch & protection fuse

Outgoing2 No Main Fire Pump & each comprising of 1 No. 200 Amps TPN, 35KA, MCCB with micro-processor based release.1 Set 'Star/Stop/Reset' push button1 No. 75 KW Automatic Star/Delta Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 No. Auto-manual & local-remote selector switch.

1 No. 100/32 A TPN MCCB ( 35 KA ) with M.R. releases and phase indicating lamps.1 Set 'Star/Stop/Reset' push button1 No. 3.75 KW Automatic DOL Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 No. Auto-manual & local-remote selector switch.

Spare 100/32 Amp TPN MCCB 35 KA - 2 Nos1 Set Phase indication light LED type with protection fuseAutomatic Engine start panel Set 1 338468 338468

1.6 M.R. STP PANELIncomer 1 No. 100 A TPN MCCB ( 35 KA ) with M.R. releases and phase indicating lamps.1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs 1 No. Digital Voltmeter 0-500V with selector switch & protection fuse

Outgoing2 Nos (1w + 1 spare) 20 KW STP Pumps & comprising of 1 No. 100/63 A TPN MCCB ( 35 KA ) with M.R. releases and phase indicating lamps.1 Set 'Star/Stop/Reset' push button1 No. 20 KW Star-Delta Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 No. Auto-manual & local-remote selector switch.


EPIL

Sl. No.

Deptt. Item No.


Amount

1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs

2 Nos (1w + 1 spare) 10 KW Efluent Treatment pump and each comprising of 1 No. 100/32 Amps TPN, 35KA, MCCB with micro-processor based release.1 Set 'Star/Stop/Reset' push button1 No. 10 KW Automatic Star/Delta Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs

Spare 100 Amp TPN MCCB 35 KA - 1 Nos1 Set Phase indication light LED type with protection fuse Set 1 183816 183816


EPIL

Sl. No.

Deptt. Item No.


Amount

1.7 M.R. WATER SUPPLY PANEL

Incomer 1 No. 200 A TPN MCCB ( 35 KA ) with M.R. releases and phase indicating lamps.1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs 1 No. Digital Voltmeter 0-500V with selector switch & protection fuse

Outgoing4 Nos (2 W + 1ST + 1Spare) 15 KW Bore Well Pumps Feeder and each comprising of 1 No. 100/63 Amps TPN, 35KA, MCCB with micro-processor based release.1 Set 'Star/Stop/Reset' push button1 No. 15KW Automatic Star/Delta Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 Set Digital Ammeter with selector switch of suitable range with three nos of CTs

10 Nos (4W + 4ST + 2Spare) Pumps Feeder and each comprising of 1 No. (2.5-4A) Amps TP MPCB - 35 KA1 Set 'Star/Stop/Reset' push button1 No. 2.2 kW DOL Starter suitable for drive.1 Set 'ON/OFF/TRIP' indication light LED type with protection fuse 1 No. Auto-manual & local-remote selector switch.

Spare 100 Amp TPN MCCB 35 KA - 2 Nos1 Set Phase indication light LED type with protection fuse Set 1 371588 371588

2 Supply, erection, testing and commissioning of 4 Pole aluminum conductor non-segregated LT Bus duct suitable forinstalling indoor of following ratings 415V ( 50KA for 1 sec.) suitable for connection between Transformer and LTPanel including tinned copper flexible end connection at both ends & flexible expansion joint in between the length ofbus duct at every 9M (if the length is more than 10 meters) including supporting structure as per specificationscomplete as required.

a) 3200A Rating. Meter 30 27567 827010

Total (in Rs.) 15601480


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub-Head - VII - Silent Type D.G Set

1 Supplying, Erection, Testing and Commissioning of following rating Silent Type Diesel Generator set Radiatortype, suitable for AMF of 415V, 3 phase 4 wire, 0.8 pf. (lagging) 50c/s A.C supply complete with engine (1500 RPM) and alternator DG Set controller with accessories including residential type silencer and fuel service tank 990 litrescapacity, battery and battery charger with all associated accessories, including MCCB of suitable rating & standard setof tools and anti-vibration mounting pads etc. The power command controller with AMF & compactable with BMS,PC and PLC complete as required.remote monitering and data logging with digital voltage regulator through inbuiltAVR, digital governing including protection complete as required. Providing and installing the complete controlcables between DG set and Main L.T Panel to make system automatic complete as required. Rate shall be inclusive ofall the items required for D.G. sets exhaust system includind M.S pipes, insulation, M.S. structure and accessories etcand shall be compiled to ECBC-2007 norms.

i) 630 KVA Set 2 4508002 9016004

Total Rs. 9016004


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub-Head - VIII - Earthing

1 MR Supply and fixing of earthing with copper earth plate 900x900x6mm thick including watering pipe etc. complete asrequired (for transformer neutral) Set 8 29440 235520

2 MR Same as item no. 1 above, but of size 1200 x 1200 x 6mm thick GI plate complete as required (for connectionequipment). Set 10 18400 184000

3 MR Supply and fixing of 50x6mm copper strip in 65mm dia GI pipe from earth electrode including cost of GI pipe 'B'class as required. Metre 80 2208 176640

4 MR Supply and fixing of 50x6mm copper strip on surface or in recess for connections etc. as required. Metre 150 1748 262200

5 MR Supply and fixing of 50x6mm GI strip on surface or in recess for connections etc as required. Metre 300 191 57300

6 MR Supply and fixing of 50x6mm G.I strips in 65mm dip GI pipe from earth electrode including cost of G.I pipe B classas required. Metre 100 920 92000

Total Rs. 1007660


EPIL

Sl. No.

Deptt. Item No.


Amount

Sub-Head - IX - Miscellaneous Items

1 MR Supplying and fixing of non-skid rubber mat 20mm thick and 900mm width as required including cutting to requiredlengths of approved make with Test Certificates for H.T. 11 KV panels. Metre 30 2300 69000

2 MR Supplying and fixing of fire bucket painted red and duly filled with sand conforming to IS: 2546-1974. Each 12 368 4416

3 MR Supplying and fixing of MS stand suitable for supporting two buckets (Pedestal type) Each 2 1012 2024

4 MR Supplying and fixing of MS stand suitable for supporting four buckets (Pedestal type) Each 2 1472 2944

5 MR Supplying and fixing of shock restorationchart written in English and Hindi duly framed in as required. Each 1 828 828

6 MR Supplying and fixing of carbon dioxide fire extinguisher type 4.5 kgs. Capacity of approved make with wall mountingbracket as required conforming to IS: 2878/1976 (Push type). Each 4 6256 25024

7 MR Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross asrequired. Each 1 414 414

8 MR Supply and fixing of MV danger plate of 200 x 150mm of mild steel at least 2mm thick and vitreous enamelled whiteon both side and with inscription in signal red colour on front side as required. Each 2 276 552

9 MR Supply and fixing of H.T. Danger notice plate of 250x200mm made of mild steel at least 2mm thick and vitreousenamelled white on both side with inscription in signal red colour on front side as required. Each 1 368 368

Total Rs. 105570


EPIL

(1C)

NSR

1 SECTION-I : FIRE PUMPS AND ACCESSORIES : Rs. 4410711.00

2 SECTION-II: EXTERNAL FIRE HYDRANT SYSTEM : Rs. 9172402.00

3 SECTION-III: INTERNAL FIRE PROTECTION SYSTEM : Rs. 4989609.00

TOTAL Rs. 18572722.00


SUMMARY SHEET


PART- XXII FIRE FIGHTING SYSTEM

SUMMARY

EPIL

Sheet- 1CSl.No.


SECTION-I : FIRE PUMPS AND ACCESSORIES NOTE:

i) Rates quoted shall be inclusive of all structural supports, clamps etc as per approved design/specifications.

1 Providing, fixing, testing and commissioning of multistage Vertical Turbine Pump of CI body, bronze impeller, material of construction for line shaft,nuts & bolts to be S.S-410 and vertical motors suitable for 415V 3 phase 50 Hz AC supply.

A) MAIN FIRE PUMPS Type of Pump - Vertical line shaft turbineRated Flow - 2850 LPM , Head - 70 mwcPump Characterstics & H.P of Motor - To comply with Clause 7.4.1.5 of TAC's Fire Protection Manual.Motor RPM - 1500 Each 1 828000 828000

B) JOCKEY PUMP

Type of Pump - Vertical line shaft turbineRated Flow - 180 LPM , Head - 70 MWCPump Characterstics & H.P of Motor - To comply with Clause 7.4.1.5 of TAC's Fire Protection Manual

Motor RPM - 2900 Each 1 230000 2300002 STAND BY FIRE PUMP (DIESEL ENGINE DRIVEN)

Providing, fixing, testing and commissioning of standby diesel engine operated multistage vertical turbine pump and Diesel engine. Pump shall beconnected to diesel engine by bevel gear. Contractor shall also provide base plate wih vibration eliminators pad on the RCC concrete base foundations,battary charger panel, diesal tank ,exhaust piping as per technical specifications.

Type of pump - Vertical line shaft turbineRated flow -2850 LPM , Head - 70 mwcPump Characteristics & Engine BHP - TO comply with para 4-1.3 of NFPA-20 (1996)Pump RPM - 1500

Engine RPM - To suit the ratio of Bavel gear



PART- XXII FIRE FIGHTING SYSTEM

A-BPA-FFS-ESTIMATE Page-1

EPIL

Sl.No.


Drive - Through bevel gear complying clause 4-5.1.3 of NFPA-20 (1996) Each 1 1012000 1012000

3 Providing and fixing double flanged vertical air vessel fabricated from 6mm MS plate with dished ends 450mm dia and 2M high common for firepumps, complete with pressure switches and valve.

Each

1 312800 312800

4 Providing and fixing dust and vermine proof cubical type motor control centre ( for the fire pumps in pump room) fabricated from 2mm thick CRCAsheet duly powder coated in approved shade and comprising of :

Each

1 731400 731400

INCOMINGa) One TP MCCB of suitable rating with rotary operating handle .

b) One 144x 144 mm panel type voltmeter of suitable range with rotary selector switch for reading voltage between phases.

c) One set of indicating lamp (RBY)

BUS BARa) TPN fully taped aluminium bus-bar of suitable capacity in separate bus-bar chamber.

OUTGOINGa) One isolation switch fuse unit with MCCB of suitable rating for main fire pumps.

b) One isolation switch fuse unit with MCCB of 63 Amps rating for jockey pumps.

c) One fully automatic star delta starter with push bottoms and ON/OFF/TRIP indicating light for main fire pumps.

d) One ‘DOL’ starter with push buttons and ON/OFF/TRIP indicating light for jockey pumps.

e) One rotary heavy duty auto/manual selector switch for main fire pumps.

f) One rotary type auto/manual selector switch for jockey pumps.

g) One 144x144mm panel type ampere meter for fire pumps.

h) One 144X144mm panel type ampere meter for jockey pumps.

i) 2 nos Single phase preventors one for each 2 phase motor.


EPIL

Sl.No.


j) Colour coded internal wiring from incoming main to bus-bar switchgear, starters, meters indicating lamps complete in all respects.

k) Space for spare outgoing (1 no)

l) Appropriate etched plastic plate for each stater/switch/light etc.

m) Circuit for automatic startup of the diesel engine operated fire pump and for battery charging

5 Electrical Work: Including supply, laying and termination of Aluminium power control cables of suitable size as per HP of fire pumps with allstructural supports, clamps and cable trays as per approved design/specifications alongwith control cable of suitable size. Earthing of all motors andpanel by GI flat of suitable size to the earthing grid/pits .

Lump sum 1 892400 892400

6 Providing and fixing Mild Steel black pipes (IS:1239 Part- I heavy class including cutting , welding/threaded joints and all fittings viz. flanges, bends,tees, elbows, reducers, clamps, hangers, structural supports, nuts and bolts, gasket etc. with one coat of primer (red oxide) and two or more coat ofsynthetic enamel paint to give an even shade of approved shade (for above ground piping inside pump room)

a) 15 mm Metre 6 336 2016b) 40 mm Metre 6 428 2568b) 50 mm Metre 18 465 8370c) 80 mm Metre 6 529 3174d) 150 mm Metre 30 1444 43320e) 200 mm (6mm thick) Metre 18 3294 59292f) 250 mm (6mm thick) Metre 6 4324 25944

7 Providing and fixing Wafer type horizontal non-return valve as per IS including nuts, bolts, 1.5 mm thick gasket sheets. a) 50 mm Each 1 5331 5331b) 150 mm Each 2 29440 58880

8 Providing and fixing pressure gauge dial size100mm, range 0-10 kg/Cm sq. complete with isolation valve. Each 4 1380 5520

9 Providing and fixing cast iron butterfly valve as per IS:13095 including nuts, bolts, 1.5 mm thick gasket sheets. a) 50 mm Each 1 3864 3864b) 80 mm Each 1 5483 5483c) 100 mm Each 1 6440 6440c) 150 mm Each 7 9099 63693d) 200 mm Each 2 18377 36754


EPIL

Sl.No.


10 Providing and fixing gunmatel four way collecting head with 63mm dia instantaneous type inlet with built in check valve for Fire Brigade Connection.

Each 2 23667 47334

11 Providing and fixing standard draw out connection with 63mm dia instantaneous type coupling with all accessories as approved by fire authorities forinstallation at under ground tank Each 1 8280 8280

12 Providing and fixing cast iron flanged foot valve with nuts, bolts, 1.5 mm thich gasket complete with all accassories as per IS : 4038 , size-200 mm NBEach 2 8924 17848

TOTAL 4410711


EPIL

Sl.No.


SECTION-II: EXTERNAL FIRE HYDRANT SYSTEM1 Providing and fixing black steel pipe to IS:1239 (Heavy Class) including all fittings like anchor fastners, couplings, bends, elbows, tees, flanges(

including blind flanges for future extension)gasket etc., welding, painting with coat of solvent based primer and wrapping with 5 layered corrosionprotection tape (2mm thick with 50% overlapping to get a final thickness of 4 mm on the surface of pipe) coat tar based conforming to IS:10221,necessary earth excavation and refilling, masonary supports. (For under ground piping).

a) 80 mm Metre 521 1012 527252b) 100 mm Metre 299 1638 489762c) 150 mm Metre 2519 2332 5874308

2 Providing and fixing Mild Steel black pipes (IS:1239 Part- I heavy class including cutting, welding and all fittings viz. flanges, elbows, structuralsupports, nuts and bolts, gasket etc. with one coat of primer (red oxide) and two or more coat of synthetic enamel paint to give an even shade ofapproved shade (for above ground piping of yard hyrant stand post)

a) 80 mm Metre 61 1316 80276

3 Providing and fixing of gunmetal, ISI marked fire hydrant landing valve with 80mm dia flanged inlet and 63mm dia instantaneous type female typelug and all accessories as per IS:5290-1993 'Type-A' with hydrant matching flanges,gaskets, nuts and bolts etc. complete in all respects.

a) Single headed Each 61 7857 479277

4 Providing and fixing 63mm dia X 15 Mtr. long flexible hose including gunmetal male and female instantaneous type coupling (IS:903), machinewound with copper wire complete in all respects with ISI certification.

a) RRL Hose pipe Each 122 6440 785680

5 Providing and fixing of gun metal 63 mm dia short branch pipe with 20mm dia nozzle, ISI marked (IS:903). Each 61 2696 164456

6 Providing and fixing cast Iron Sluice Valve as per IS : 780 (PN:1.6) including nuts, bolts, gasket etc.a) 150 mm Each 8 27600 2208007 Providing and fixing Hose Box of size 500X750x250 fabricated from 16 gauge MS sheet of fully welded construction with hinged double front door

with locking arrangements and partially glazed with 5mm thick glass stove enamelled fire red finish with fire hose written on front suitable to house2x15 M synthetic non perculating hose with couplings, one branch pipe (for external yard hydrants).

Design to be got approved from Engineer-in-Charge before fabrication. Each 61 6771 4130318 Construction of brick masonary chamber 1200X1200 inside 75 class designation brick work in cement mortar 1:5 for gate valve with CI surface box

400x400x75 inside with hinged cover fixed in M-15 grade cement slab and necessary excavation foundation concrete 1:5:10 and inside plastering withcement mortar 1:3 finished with a floating coat of neat cement complete as per standard with FPS brickes.

Each 8 17195 137560TOTAL 9172402


EPIL

Sl.No.


SECTION-III: INTERNAL FIRE PROTECTION SYSTEM

NOTE: Rates quoted shall be inclusive of all structural supports and clamps as per approved design by Engineer-in-Charge.

TERRACE PUMP1 Providing and fixing horizontal single/multistage pumping set with CI body, bronze impeller, Material of construction of Shaft as per IS:2073 GR C-

45, Shaft Sleeve & nuts as per AISI-410 with mechanical seal and connected by a flexible coupling to a totally enclosed fan cooled induction motormounted on common structural base plate with all pump accessories complete as per specifications vibration eliminators of approval make. Motor tobe suitable for 415 volts, 3 phase, 50 Hz. A/C supply as per Pump Manufacturers recommendations.

a) Type of pump- Single/ Multistage pumpCapacity - 450 LPMHead - 35 WMCH.P. - As required to be rechecked from characteristic curve of pump Each 7 61640 431480RPM - 2900

b) Type of pump- Single/ Multistage pumpCapacity - 900 LPMHead - 35 WMCH.P. - As required to be rechecked from characteristic curve of pump Each 1 188600 188600RPM - 2900

2 Providing and fixing Wafer type horizontal non-return valve as per IS including nuts, bolts, 1.5 mm thick gasket sheets. a) 100 mm Each 8 25760 206080

3 Providing and fixing pressure gauge dial size100mm, range 0-10 kg/Cm sq. complete with isolation valve. Each 8 1380 11040

4 Providing and fixing cast iron butterfly valve as per IS:13095 including nuts, bolts, 1.5 mm thick gasket sheets. a) 100 mm Each 16 6440 103040

INTERNAL HYDRANT SYSTEM5 Providing and fixing black steel pipes to IS:1239 heavy class including all fittings like anchor fasteners, couplings, bends, elbows, tees, flanges, gasket

etc., welding , cutting holes in brick or RCC walls and making good and painting with one coat of red-oxide primer and two or more coats of syntheticenamel paints to given an even shade. (For above ground piping).

a) 25 mm Metre 48 382 18336b) 40 mm Metre 72 428 30816d) 80 mm Metre 84 529 44436e) 100 mm Metre 450 1270 571500


EPIL

Sl.No.


f) 150 mm Metre 42 1444 60648

6 Providing and fixing of gunmetal, ISI marked fire hydrant landing valve with 80mm dia flanged inlet and 63mm dia instantaneous type female typelug and all accessories as per IS:5290-1993 'Type-A' with hydrant matching flanges,gaskets, nuts and bolts etc. complete in all respects.


7 Providing and fixing 63mm dia X 15 Mtr. long flexible hose including gunmetal male and female instantaneous type coupling (IS:903), machinewound with copper wire complete in all respects with ISI certification.

a) RRL Hose pipe Each 74 6440 476560

8 Providing and fixing of gun metal 63 mm dia short branch pipe with 20mm dia nozzle, ISI marked (IS:903). Each 37 2696 99752

9 Providing and fixing of Fire Hose Cabinet door (including door frame) of size 1170 x 2100 approx. fabricated from 16 gauge MS sheet of fully weldedconstruction with hinged double front door with locking arrangements and partially glazed with 5mm thick glass, stove enamelled fire red finish withfire hose written on front suitable to house - 2x15 M flexible hose pipes with coupling, 1 Nos. landing valve, 1 Nos. branch pipe, one fireman’s axeand first aid hose reel drum. The width and height to depend upon the actual size of the fire shaft available. Contractor to make shop drawings and getit approved from Engineer-in-Charge/Consultant before fabrication.

Each 25 32200 805000

10 Providing and fixing Fire Hose Box of size 500X750x250 fabricated from 16 gauge MS sheet of fully welded construction with hinged double frontdoor with locking arrangements and partially glazed with 5mm thick glass stove enamelled fire red finish with 'FIRE HOSE' written on front suitable tohouse 2x15 M synthetic non perculating hose with couplings, one branch pipe (AT TERRACE)).

Design to be got approved from Engineer-in-Charge before fabrication. Each 12 6771 81252

11 Providing and fixing first aid fire hose reel drum wall mounting swinging type fitted with 30 mtrs. 20 mm dia highpressure rubber hose to IS:5132 with5mm outlet gunmetal nozzle with shut off valve (IS:884). Each 25 11500 287500

12 Providing and fixing pressure gauge dial size 100mm, range 0-10 kg/Cm sq. complete with isolation valve. Each 8 1380 11040

13 Providing and fixing cast iron butterfly valve as per IS:13095 including nuts, bolts 1.5mm thick gasket sheets.a) 100 mm Each 16 6440 103040


EPIL

Sl.No.


INTERNAL HYDRANT SYSTEM14 Providing and fixing black steel pipes to IS:1239 heavy class including all fittings like anchor fasteners, couplings, bends, elbows, tees, flanges, gasket

etc., welding, cutting holes in brick or RCC walls and making good and painting with one coat of red-oxide primer and two or more coats of syntheticenamel paints to given an even shade. (For above ground piping),

a) 25 mm Metre 48 373 17904b) 40 mm Metre 72 428 30816c) 80 mm Metre 84 529 44436d) 100 mm Metre 450 1035 465750e) 150 mm Metre 42 1444 60648

15 Providing and fixing of gummetal, ISI marked fire hydrant landing valve with 80mm dia flanged inlet and 63 mm dia instantaneous type female typelug and all accessories as per IS: 5290-1993 'Type-A' with hydrant matching flanges, gaskets, nuts and bolts etc. complete in all respects.


16 Providing and fixing 63 mm dia X 15 Mtr. Long flexible hose including gunmetal male and female instantaneous type coupling (IS:903), machinewound with copper wire complete in all respects with ISI certification.

a) 25 mm Each 12 4600 55200

17 Providing and fixing cast Iron Butter fly valve (PN:1.6) including nuts, bolts, gasket etc.a) 100 mm Each 12 8772 105264

19 Providing and fixing portable fire extinguisher water type (gas cartridge) with cylinder fully charged of 9 litres capacity complete with standarddischarge valve with tube CI bracket for wall mounting etc. conforming to IS:940. Each 31 3163 98053

TOTAL 4989609


EPIL

(1C)NSR

VENTILATION SYSTEM

1 SUB HEAD - I - VENTILATION WORK (DESERT COOLERS) Rs. 6681126.00

2 SUB-HEAD - II - VENTILATION WORK Rs. 3723884.00

TOTAL 10405010.00

AIR CONDITIONING SYSTEM (VRV/VRF AC SYSTEM)

1 SUB-HEAD I: VARIABLE REFRIGERANT VOLUME / VARIABLE REFRIGERANT FLOW AC SYSTEM Rs. 18929412.00

2 SUB-HEAD - II : AIR DISTRIBUTION SYSTEM, INSULATION & ELECTRICAL Rs. 2247495.00

3 SUB-HEAD - III : SPLIT TYPE AIR CONDITIONING UNITS Rs. 3187553.00

TOTAL 24364460.00

GRANT TOTAL Rs. 34769470.00


SUMMARY - SHEET


PART- XXXIV VENTILATION AND AC VRV SYSTEM DETAILS

SUMMARY

EPIL

S. No. Description Unit Qty. Rate Amount

Sheet- 1C VENTILATION SYSTEM

SUB HEAD - I - VENTILATION WORK (DESERT COOLERS)

1.0 DESERT COOLERS :NSR Supply, installation, testing of Desert Coolers, complete as per specifications and drawing.

1 INSPECTOR/SI RESIDENCEa GF. LIVING ROOM 16 UNITS 1100 cfm Nos. 16 6463 103408b FF. LIVING ROOM 16 UNITS 1100 cfm Nos. 16 6463 103408c SF. LIVING ROOM 16 UNITS 1100 cfm Nos. 16 6463 1034082 ASI/HAVILDAR FAMILY QTRSa GF. LIVING ROOM 28 UNITS 1100 cfm Nos. 28 6463 180964b FF. LIVING ROOM 28 UNITS 1100 cfm Nos. 28 6463 180964c SF. LIVING ROOM 28 UNITS 1100 cfm Nos. 28 6463 1809643 CONSTABLE/4TH FAMILY QTRS.

SINGLE UNITa GF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 129260b FF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 129260c SF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 129260

DOUBLE UNITa GF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 129260b FF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 129260c SF. LIVING ROOM 20 UNITS 1100 cfm Nos. 20 6463 1292604 GAS GODOWNa OFFICE 1100 cfm Nos. 1 6463 6463


Ventilation and Air-Conditioning work


PART- XXXIV VENTILATION AND AC VRV SYSTEM DETAILS

A-BPA-VACVRVSYSTEM-ESTIMATE Page-1

EPIL


Sheet- 1C5 LAUNDRYa LAUNDRY MANAGER 1100 cfm Nos. 1 6463 64636 GATE HOUSEa RECEPTION CUM WAITING 1100 cfm Nos. 1 6463 6463b GUARD REST ROOM 1100 cfm Nos. 1 6463 6463c GUARD HOUSE 1100 cfm Nos. 1 6463 64637 POLICE STATIONa BARRACKS 1100 cfm Nos. 1 6463 6463b MALKHANA 1100 cfm Nos. 1 6463 6463c DUTY ROOM 1100 cfm Nos. 1 6463 6463d SHO ROOM 1100 cfm Nos. 1 6463 6463e OFFICERS ROOM 1100 cfm Nos. 1 6463 6463f INTERROGATION ROOM 1100 cfm Nos. 1 6463 64638 PRIMARY SCHOOLa CLASS-1 1100 cfm Nos. 1 6463 6463b CLASS-2 1100 cfm Nos. 1 6463 6463c CLASS-3 1100 cfm Nos. 1 6463 6463d CLASS-4 1100 cfm Nos. 1 6463 6463e CLASS-5 1100 cfm Nos. 1 6463 6463f KINDERGARTEN-1 1100 cfm Nos. 1 6463 6463g KINDERGARTEN-2 1100 cfm Nos. 1 6463 6463h NURSERY CLASS 1100 cfm Nos. 1 6463 6463i PRINCIPAL ROOM 1100 cfm Nos. 1 6463 6463j STAFF ROOM 1100 cfm Nos. 1 6463 6463k SCHOOL OFFICE 1100 cfm Nos. 1 6463 6463l LIBRARY 1100 cfm Nos. 1 6463 64639 RESERVE OFFICE

GROUND FLOORa SUPERINTENDENT ROOM 1100 cfm Nos. 1 6463 6463b DAY DUTY OFFICE 1100 cfm Nos. 1 6463 6463c OFFICERS ROOM 1100 cfm Nos. 1 6463 6463

FIRST FLOORa PERSONAL SECTION 1100 cfm Nos. 1 6463 6463


EPIL


Sheet- 1C10 EQUESTERIAN SCHOOL a VETENARY OFFICERS OFFICE 1100 cfm Nos. 1 6463 6463b RIDING MASTERS OFFICE 1100 cfm Nos. 1 6463 6463c EQ STABLE OFFICE 1100 cfm Nos. 1 6463 6463d SECURITY ROOM 1100 cfm Nos. 1 6463 6463e DRESSING AREA 1700 cfm Nos. 1 8964 8964f VETENARY PHARMACY 1100 cfm Nos. 1 6463 6463g 30 NOS.STABLES 108 SQ.FT EACH 1100cfm Nos. 30 6463 193890

11 CANINE SCHOOLa OFFICE ROOM 1100 cfm Nos. 1 6463 6463b CANINE STORE 1100 cfm Nos. 1 6463 6463C 20 NOS.MAIN DOG ROOM 30 SQ.FT EACH 1100 cfm Nos. 20 6463 12926012 UTILITY BUILDING

GROUND FLOORa CAFÉ 1100 cfm Nos. 1 6463 6463b COOPERATIVE STORE 3500 cfm Nos. 2 6463 12926c MILKBOOTH 1100 cfm Nos. 1 6463 6463d POST OFFICE 1100 cfm Nos. 1 6463 6463e ATM-1. 1100 cfm Nos. 1 6463 6463f ATM-2 1100 cfm Nos. 1 6463 6463g COBBLER 1100 cfm Nos. 1 6463 6463h KIOSK 1100 cfm Nos. 1 6463 6463

FIRST FLOORa CIVIL MAINTENANCEOFFICE 1100 cfm Nos. 1 6463 6463b TRAVEL AGENT 1100 cfm Nos. 1 6463 6463c BANK 1100 cfm Nos. 1 6463 6463d TAILOR 1100 cfm Nos. 1 6463 6463e BARBER 1100 cfm Nos. 1 6463 6463

13 WATCH TOWERa DORMITORY 1100 cfm Nos. 1 6463 6463

14 TRAINING CENTRE-1AGROUND FLOOR

a class room 2 (100 seater) 2500 cfm Nos. 4 11040 44160


EPIL


Sheet- 1Cb class room 3 (100 seater) 2200 cfm Nos. 4 10580 42320c class room 1 (50 seater) 3000 cfm Nos. 2 11500 23000d class room 2 (50 seater) 3000 cfm Nos. 2 11500 23000e class room 4 (50 seater) 3000 cfm Nos. 2 11500 23000f café/tea stall 4500 cfm Nos. 1 12420 12420

FIRST FLOORa class room 4 (100 seater) 2500 cfm Nos. 4 11040 44160b class room 5 (100 seater) 2500 cfm Nos. 4 11040 44160c class room 5 (50 seater) 3000 cfm Nos. 2 11500 23000d class room 6 (50 seater) 3000 cfm Nos. 2 11500 23000e class room 7 (50 seater) 3000 cfm Nos. 2 11500 23000f class room 8 (50 seater), 3000 cfm Nos. 2 11500 23000


EPIL


Sheet- 1C15 TRAINING CENTRE-1B

GROUND FLOORa Technical section 1700 cfm Nos. 1 8964 8964b Librarian room 1100 cfm Nos. 1 6463 6463c Trg. materials/ publications 2500 cfm Nos. 2 6463 12926d Reprography 1100 cfm Nos. 1 6463 6463e Store 1100 cfm Nos. 1 6463 6463

FIRST FLOORa Instructor room-1, 1100 cfm Nos. 1 6463 6463b Instructor room-2, 1100 cfm Nos. 1 6463 6463c Instructor room-3, 1100 cfm Nos. 1 6463 6463d Instructor room-4, 1100 cfm Nos. 1 6463 6463e Instructor room-5, 1100 cfm Nos. 1 6463 6463f Instructor room-6, 1100 cfm Nos. 1 6463 6463g Instructor room-7, 1100 cfm Nos. 1 6463 6463h Instructor room-8, 1100 cfm Nos. 1 6463 6463i Instructor room-9, 1100 cfm Nos. 1 6463 6463j Instructor room-10, 1100 cfm Nos. 1 6463 6463k Disaster mgm. Classroom, 3500 cfm Nos. 2 11960 23920l combat/rescue classroom 2000 cfm Nos. 2 9371 18742m Disaster mgm. Demo/store 2000 cfm Nos. 2 9371 18742n combat/rescue demo 2000 cfm Nos. 1 9371 9371o intelligence classroom 3500 cfm Nos. 2 11960 23920p intelligence demo 3500 cfm Nos. 1 11960 11960q traffice management rm. 2500 cfm Nos. 2 11040 22080r advance investigation rm 3500 cfm Nos. 2 11960 23920s traffice management demo 3000 cfm Nos. 1 11500 11500t cyber crime investigate rm. 2200 cfm Nos. 2 10580 21160

16 TRAINING CENTRE-1CGROUND FLOOR

a Unarmed combat training 2500 cfm Nos. 4 11040 44160b gymnesium 2000 cfm Nos. 6 9371 56226c tabletennis badminton


EPIL


Sheet- 1C3000 cfm Nos. 14 11500 161000FIRST FLOOR

a indoor firing range 2500 cfm Nos. 8 9371 74968


EPIL


Sheet- 1C17 TRAINING CENTRE-1D

GROUND FLOORa Laboratory-1, 3000 cfm Nos. 1 11500 11500b Laboratory-2, 3000 cfm Nos. 1 11500 11500c Laboratory-6, 3000 cfm Nos. 1 11500 11500d Counciling room-1, 2000 cfm Nos. 1 9371 9371e Counciling room-2, 2000 cfm Nos. 1 9371 9371f store room, 2000 cfm Nos. 1 9371 9371g store, 1100 cfm Nos. 1 6463 6463h staff rm.non police inst, 2000 cfm Nos. 1 9371 9371i staff rm.junior inst , 2000 cfm Nos. 1 9371 9371j staff rm.senior inst, 2000 cfm Nos. 1 9371 9371

FIRST FLOORa Laboratory-7, 3000 cfm Nos. 1 11500 11500b Laboratory-8, 3000 cfm Nos. 1 11500 11500c Laboratory-9, 3000 cfm Nos. 1 11500 11500d Laboratory-10, 3000 cfm Nos. 1 11500 11500e Laboratory-11, 3000 cfm Nos. 1 11500 11500f Laboratory-12, 3000 cfm Nos. 1 11500 11500g Counciling room-5, 1800 cfm Nos. 1 9371 9371h Counciling room-6, 1800 cfm Nos. 1 9371 9371i Counciling room-7, 1800 cfm Nos. 1 9371 9371j Counciling room-8, 1800 cfm Nos. 1 9371 9371k Counciling room-9, 1800 cfm Nos. 1 9371 9371l Counciling room-10, 1800 cfm Nos. 1 9371 9371m Counciling room-11, 1100 cfm Nos. 1 6463 6463n Counciling room-12, 1800 cfm Nos. 1 8964 8964o store, 1100 cfm Nos. 1 6463 6463


EPIL


Sheet- 1C18 JUNIOR OFFICERS MESS (GIRLS)

Ground Floora Living Rooms 1100 cfm Nos. 20 6463 129260b First Floorc Living Rooms 1100 cfm Nos. 16 6463 103408

19 OFFICERS CLUBGround Floor

a Flood Rescue Training Classroom-1 ; 1500 Nos. 1 7922 7922b Flood Rescue Training Classroom-2 ; 1500 cfm Nos. 1 7922 7922c Demo Store Room 1500 cfm Nos. 1 7922 7922

20 GUEST HOUSEa Office 1100 cfm Nos. 1 6463 6463

21 MOTOR TRAINING SCHOOLa Class Room 1500 cfm Nos. 1 7922 7922b Instructors Room 1100cfm Nos. 1 6463 6463c Store 1100 cfm Nos. 1 6463 6463

22 JUNIOR OFFICERS MESSa 153 Rooms 1100 cfm Nos. 153 6463 988839b 149 Rooms 1100 cfm Nos. 149 6463 962987c 139 Rooms 1100 cfm Nos. 139 6463 898357

23 HOSPITALa Male Ward-1 ; 1500 cfm Nos. 1 7922 7922b Male Ward-2 ; 1500 cfm Nos. 1 7922 7922c Female Ward 1500 cfm Nos. 1 7922 7922d Nurses Station 1100 cfm Nos. 1 6463 6463e Registration Office 1100 cfm Nos. 1 6463 6463f Ladies Waiting 1100 cfm Nos. 1 6463 6463g OPD 1100 CFM Nos. 1 6463 6463


EPIL


Sheet- 1C

TOTAL : SUB-HEAD - I 6681126


EPIL


Sheet- 1C

SUB-HEAD - II - VENTILATION WORK

A PROPELLER FANS

1 Supply, installation, testing & commissioning of fans for exhaust complete with motor suitable for 220Volts 50 Hz, single phase AC Supply, with supporting arrangement and flexible connection etc. asrequired and as per specifications.

1 INSPECTOR/SI RESIDENCEa GF. LIVING ROOM 16 UNITS 870 cfm; 300 mm dia Nos. 16 1564 25024b FF. LIVING ROOM 16 UNITS 820 cfm; 300 mm dia Nos. 16 1564 25024c SF. LIVING ROOM 16 UNITS 820 cfm; 300 mm dia Nos. 16 1564 250242 ASI/HAVILDAR FAMILY QTRSa GF. LIVING ROOM 28 UNITS 800 cfm; 300 mm dia Nos. 28 1564 43792b FF. LIVING ROOM 28 UNITS 800 cfm; 300 mm dia Nos. 28 1564 43792c SF. LIVING ROOM 28 UNITS 800 cfm; 300 mm dia Nos. 28 1564 437923 CONSTABLE/4TH FAMILY QTRS.

SINGLE UNITa GF. LIVING ROOM 20 UNITS 840 cfm; 300 mm dia Nos. 20 1564 31280b FF. LIVING ROOM 20 UNITS 840 cfm; 300 mm dia Nos. 20 1564 31280c SF. LIVING ROOM 20 UNITS 840 cfm; 300 mm dia Nos. 20 1564 31280

DOUBLE UNITa GF. LIVING ROOM 20 UNITS 850 cfm; 300 mm dia Nos. 20 1564 31280b FF. LIVING ROOM 20 UNITS 850 cfm; 300 mm dia Nos. 20 1564 31280c SF. LIVING ROOM 20 UNITS 850 cfm; 300 mm dia Nos. 20 1564 31280

4 GAS GODOWNa OFFICE 840 cfm; 300 mm dia Nos. 1 1564 15645 LAUNDRY


EPIL


Sheet- 1Ca LAUNDRY MANAGER 800 cfm; 300 mm dia Nos. 1 1564 15646 GATE HOUSEa RECEPTION CUM WAITING 850 cfm; 300 mm dia Nos. 1 1564 1564b GUARD REST ROOM 850 cfm; 300 mm dia Nos. 1 1564 1564c GUARD HOUSE 850 cfm; 300 mm dia Nos. 1 1564 1564


EPIL


Sheet- 1C7 POLICE STATIONa BARRACKS 820 cfm; 300 mm dia Nos. 1 1564 1564b MALKHANA 820 cfm; 300 mm dia Nos. 1 1564 1564c DUTY ROOM 820 cfm; 300 mm dia Nos. 1 1564 1564d SHO ROOM 860 cfm; 300 mm dia Nos. 1 1564 1564e OFFICERS ROOM 860 cfm; 300 mm dia Nos. 1 1564 1564f INTERROGATION ROOM 850 cfm; 300 mm dia Nos. 1 1564 15648 PRIMARY SCHOOLa CLASS-1, 830 cfm; 300 mm dia Nos. 1 1564 1564b CLASS-2, 830 cfm; 300 mm dia Nos. 1 1564 1564c CLASS-3, 830 cfm; 300 mm dia Nos. 1 1564 1564d CLASS-4, 830 cfm; 300 mm dia Nos. 1 1564 1564e CLASS-5,830 cfm; 300 mm dia Nos. 1 1564 1564f KINDERGARTEN-1,830 cfm; 300 mm dia Nos. 1 1564 1564g KINDERGARTEN-2,830 cfm; 300 mm dia Nos. 1 1564 1564h NURSERY CLASS, 830 cfm; 300 mm dia Nos. 1 1564 1564i PRINCIPAL ROOM, 800 cfm; 300 mm dia Nos. 1 1564 1564j STAFF ROOM, 830 cfm; 300 mm dia Nos. 1 1564 1564k SCHOOL OFFICE, 840 cfm; 300 mm dia Nos. 1 1564 1564l LIBRARY, 840 cfm; 300 mm dia Nos. 1 1564 15649 RESERVE OFFICE

GROUND FLOORa SUPERINTENDENT ROOM 820 cfm; 300 mm dia Nos. 1 1564 1564b DAY DUTY OFFICE 830 cfm; 300 mm dia Nos. 1 1564 1564c OFFICERS ROOM 830 cfm; 300 mm dia Nos. 1 1564 1564

FIRST FLOORa PERSONAL SECTION 830 cfm; 300 mm dia Nos. 1 1564 1564

10 EQUESTERIAN SCHOOL a VETENARY OFFICERS OFFICE 840 cfm; 300 mm dia Nos. 1 1564 1564b RIDING MASTERS OFFICE 840 cfm; 300 mm dia Nos. 1 1564 1564c EQ STABLE OFFICE 900 cfm; 300 mm dia Nos. 1 1564 1564d SECURITY ROOM 830 cfm; 300 mm dia Nos. 1 1564 1564e DRESSING AREA 1400 cfm; 375 mm dia Nos. 1 1564 1564


EPIL


Sheet- 1Cf VETENARY PHARMACY 900 cfm ; 300 mm dia Nos. 1 1564 1564g 30 NOS.STABLES 108 SQ.FT EACH 850cfm ; 300 mm dia Nos. 30 1564 46920


EPIL


Sheet- 1C11 CANINE SCHOOLa OFFICE ROOM 830 cfm; 300 mm dia Nos. 1 1564 1564b CANINE STORE 820 cfm; 300 mm dia Nos. 1 1564 1564C 20 NOS.MAIN DOG ROOM 30 SQ.FT EACH 800 cfm; 300 mm dia Nos. 20 1564 3128012 UTILITY BUILDING

GROUND FLOORa CAFÉ 870 cfm; 300 mm dia Nos. 1 1564 1564b COOPERATIVE STORE 1800 cfm; 375 mm dia Nos. 3 1564 4692c MILKBOOTH 800 cfm; 300 mm dia Nos. 1 1564 1564d POST OFFICE 800 cfm; 300 mm dia Nos. 1 1564 1564e ATM-1. 840 cfm; 300 mm dia Nos. 1 1564 1564f ATM-2 840 cfm; 300 mm dia Nos. 1 1564 1564g COBBLER 840 cfm; 300 mm dia Nos. 1 1564 1564h KIOSK 850 cfm; 300 mm dia Nos. 1 1564 1564

FIRST FLOORa CIVIL MAINTENANCEOFFICE 900 cfm; 300 mm dia Nos. 1 1564 1564b TRAVEL AGENT 850 cfm; 300 mm dia Nos. 1 1564 1564c BANK 850 cfm; 300 mm dia Nos. 1 1564 1564d TAILOR 850 cfm; 300 mm dia Nos. 1 1564 1564e BARBER 850 cfm; 300 mm dia Nos. 1 1564 1564

13 WATCH TOWERa DORMITORY 850 cfm; 300 mm dia Nos. 1 1564 1564

14 TRAINING CENTRE-1AGROUND FLOOR

a class room 2 (100 seater) 1800 cfm; 375 mm dia Nos. 3 1932 57961300 cfm; 375 mm dia Nos. 1 1932 1932

b class room 3 (100 seater) 1850 cfm; 375 mm dia Nos. 3 1932 5796950 cfm; 300 mm dia Nos. 1 1932 1932

c class room 1 (50 seater) 1850 cfm; 375 mm dia Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

d class room 2 (50 seater) 1850 cfm; 375 mm dia Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

e class room 4 (50 seater) 1850 cfm; 375 mm dia Nos. 2 1932 3864


EPIL


Sheet- 1C1100 cfm; 375 mm dia Nos. 1 1932 1932

f café/tea stall 1800 cfm; 375 mm dia Nos. 2 1932 3864


EPIL


Sheet- 1CFIRST FLOOR

a class room 4 (100 seater) 1850 cfm; 375 mm dia Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

b class room 5 (100 seater) 1850 cfm; 375 mm dia Nos. 3 1932 57961200 cfm; 375 mm dia Nos. 1 1932 1932

c class room 5 (50 seater) 1850 cfm; 375 mm dia Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

d class room 6 (50 seater) 1850 cfm; 375 mm dia Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

e class room 7 (50 seater) 1850 cfm Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

f class room 8 (50 seater), 1850 cfm Nos. 2 1932 38641100 cfm; 375 mm dia Nos. 1 1932 1932

15 TRAINING CENTRE-1BGROUND FLOOR

a Technical section 1200 cfm; 375 mm dia Nos. 1 1932 1932b Librarian room 900 cfm; 300 mm dia Nos. 1 1564 1564c Trg. materials/ publications 1800 cfm; 375 mm dia Nos. 2 1932 3864d Reprography 820 cfm; 300 mm dia Nos. 1 1564 1564e Store 820 cfm; 300 mm dia Nos. 1 1564 1564

FIRST FLOORa Instructor room-1, 850 cfm; 300 mm dia Nos. 1 1564 1564b Instructor room-2, 850 cfm; 300 mm dia Nos. 1 1564 1564c Instructor room-3, 850 cfm; 300 mm dia Nos. 1 1564 1564d Instructor room-4, 850 cfm; 300 mm dia Nos. 1 1564 1564e Instructor room-5, 850 cfm; 300 mm dia Nos. 1 1564 1564f Instructor room-6, 830 cfm; 300 mm dia Nos. 1 1564 1564g Instructor room-7, 830 cfm; 300 mm dia Nos. 1 1564 1564h Instructor room-8, 830 cfm; 300 mm dia Nos. 1 1564 1564i Instructor room-9, 800 cfm; 300 mm dia Nos. 1 1564 1564j Instructor room-10, 800 cfm; 300 mm dia Nos. 1 1564 1564k Disaster mgm. Classroom, 1850 cfm; 375 mm dia Nos. 3 1932 5796l combat/rescue classroom 1500 cfm; 375 mm dia Nos. 2 1932 3864


EPIL


Sheet- 1Cm Disaster mgm. Demo/store 1500 cfm; 375 mm dia Nos. 2 1932 3864n combat/rescue demo 1700 cfm; 375 mm dia Nos. 1 1932 1932o intelligence classroom 1850 cfm; 375 mm dia Nos. 3 1932 5796p intelligence demo 1450 cfm; 375 mm dia Nos. 2 1932 3864q traffice management rm. 1800 cfm; 375 mm dia Nos. 2 1932 3864r advance investigation rm 1850 cfm; 375 mm dia Nos. 3 1932 5796s traffice management demo 1200 cfm; 375 mm dia Nos. 2 1932 3864t cyber crime investigate rm. 1700 cfm; 375 mm dia Nos. 2 1932 3864

16 TRAINING CENTRE-1CGROUND FLOOR

a Unarmed combat training 1800 cfm; 375 mm dia Nos. 4 1932 7728b gymnesium 1850 cfm; 375 mm dia Nos. 5 1932 9660c tabletennis badminton 1850 cfm; 375 mm dia Nos. 18 1932 34776

FIRST FLOORa indoor firing range 1850 cfm; 375 mm dia Nos. 5 1932 9660

17 TRAINING CENTRE-1DGROUND FLOOR

a Laboratory-1, 1500 cfm; 375 mm dia Nos. 2 1932 3864b Laboratory-2, 1500 cfm; 375 mm dia Nos. 1 1932 1932c Laboratory-6, 1500 cfm; 375 mm dia Nos. 2 1932 3864d Counciling room-1, 1400 cfm; 375 mm dia Nos. 1 1932 1932e Counciling room-2, 1400 cfm; 375 mm dia Nos. 1 1932 1932f store room, 1500 cfm;; 375 mm dia Nos. 1 1932 1932g store, 850 cfm; 300 mm dia Nos. 1 1564 1564h staff rm.non police inst, 1400 cfm; 375 mm dia Nos. 1 1932 1932i staff rm.junior inst , 1400 cfm; 375 mm dia Nos. 1 1932 1932j staff rm.senior inst, 1400 cfm; 375 mm dia Nos. 1 1932 1932

FIRST FLOORa Laboratory-7, 1500 cfm; 375 mm dia Nos. 2 1932 3864b Laboratory-8, 1500 cfm; 375 mm dia Nos. 2 1932 3864c Laboratory-9, 1500 cfm; 375 mm dia Nos. 2 1932 3864d Laboratory-10, 1500 cfm; 375 mm dia Nos. 2 1932 3864e Laboratory-11, 1500 cfm; 375 mm dia Nos. 2 1932 3864


EPIL


Sheet- 1Cf Laboratory-12, 1500 cfm; 375 mm dia Nos. 2 1932 3864g Counciling room-5, 1400 cfm; 375 mm dia Nos. 1 1932 1932h Counciling room-6, 1400 cfm; 375 mm dia Nos. 1 1932 1932i Counciling room-7, 1400 cfm; 375 mm dia Nos. 1 1932 1932j Counciling room-8, 1400 cfm; 375 mm dia Nos. 1 1932 1932k Counciling room-9, 1400 cfm; 375 mm dia Nos. 1 1932 1932l Counciling room-10, 1400 cfm; 375 mm dia Nos. 1 1932 1932m Counciling room-11, 1400 cfm; 375 mm dia Nos. 1 1932 1932n Counciling room-12, 1400 cfm; 375 mm dia Nos. 1 1932 1932o store, 820 cfm; 300 mm dia Nos. 1 1564 1564

18 JUNIOR OFFICERS MESS (GIRLS)a Ground Floorb Living Rooms 880 cfm; 300 mm dia Nos. 20 1564 31280c First Floor

Living Rooms 880 cfm; 300 mm dia Nos. 16 1564 25024

19 OFFICERS CLUBGround Floor

a Flood Rescue Training Classroom-1 ; 1200 cfm; 375 mm dia Nos. 1 1932 1932b Flood Rescue Training Classroom-2 ; 1200 cfm; 375 mm dia Nos. 1 1932 1932c Demo Store Room 1200 cfm; 375 mm dia Nos. 1 1932 1932

20 GUEST HOUSEa Office 880 cfm; 300 mm dia Nos. 1 1564 1564

21 MOTOR TRAINING SCHOOLa Class Room 1200 cfm; 375 mm dia Nos. 1 1932 1932b Instructors Room 880cfm; 300 mm dia Nos. 1 1564 1564c Store 880 cfm; 300 mm dia Nos. 1 1564 1564

22 JUNIOR OFFICERS MESSa 153 Rooms 880 cfm; 300 mm dia Nos. 153 1564 239292


EPIL


Sheet- 1Cb 149 Rooms 880 cfm; 300 mm dia Nos. 149 1564 233036c 139 Rooms 880 cfm; 300 mm dia Nos. 139 1564 217396

23 HOSPITALa Male Ward-1 ; 1200 cfm; 375 mm dia Nos. 1 1932 1932b Male Ward-2 ; 1200 cfm; 375 mm dia Nos. 1 1932 1932c Female Ward 1200 cfm; 375 mm dia Nos. 1 1932 1932d Nurses Station 880 cfm; 300 mm dia Nos. 1 1564 1564e Registration Office 880 cfm; 300 mm dia Nos. 1 1564 1564f Ladies Waiting 880 cfm; 300 mm dia Nos. 1 1564 1564g OPD 880 CFM Nos. 1 1564 1564

B INLINE FAN (Ceiling suspended) :Supply, installation, testing & commissioning of fans for toilet & pantry exhaust complete with motorsuitable for 220 volts 50 Hz,single phase A/C supply with supporting arrangements and flexible

i i d d ifi ia 300cfm, 10mm static pressure ROb 400cfm, 10mm static pressure ROc 500cfm, 10mm static pressure Nos. 200 10672 2134400

TOTAL : SUB-HEAD - II 3723884


EPIL


Sheet- 1C

AIR CONDITIONING SYSTEM (VRV/VRF AC SYSTEM)

SUB-HEAD I: VARIABLE REFRIGERANT VOLUME / VARIABLE REFRIGERANT FLOW AC SYSTEM

1 Supply, installation, testing & commissioning of Air cooled VRV / VRF Modular type Air Conditioningsystem of high C.O.P, complete with indoor and outdoor units duly charged with refrigerant R-410A andoil (first charge) with individual controller, (suitable for 415+ 10% for outdoor and 230 + 5% for indoorunits) and complete with all accessories, fittings etc. as per specifications and as required at site. (The equipment shall be in line with the specifications).

A Outdoor UnitsComplete with twin rotary/scroll compressor and drive arrangement, initial charge of refrigerant (R-410A)& oil, refrigerant piping, drier, sight glass, dual pressure cutout all housed and supported properly incabinet, air cooled condenser & its controller as per specification and as required at site of followingcapacities :-

1 39 TR ADMINISTRATIVE BLOCK GROUND FLOOR No. 1 1244551 12445512 23 TR ADMINISTRATIVE BLOCK FIRST FLOOR No. 1 752055 7520553 24.8 TR FOR ADMINISTRATIVE BLOCK CONFERENCE HALL & PREFUNCTION AREA No. 1 856278 8562784 8 TR DIRECTORS RESIDENCE No. 1 286070 2860705 11.1 TR DY.DIRECTORS RESIDENCE BLOCK A No. 1 339662 3396626 10.1 TR DY.DIRECTORS RESIDENCE BLOCK B No. 1 339662 3396627 9.3 TR DY.DIRECTORS RESIDENCE BLOCK C No. 1 320195 3201958 12 TR TRAINING CENTRE -1A,GF CLASSROOM1(100 SEATER) No. 1 382458 3824589 8 TR TRAINING CENTRE -1A,GF CLASSROOM3(50 SEATER) No. 1 286069 286069

10 34.1 TR TRAINING CENTRE -1B,GF REFERENCE LIBRARY/KIOSKS No. 1 1080424 108042411 7 TR TRAINING CENTRE -1B,GF ACADEMY PRESS No. 1 286070 28607012 13 TR TRAINING CENTRE -1B,FF FIRE ARMS TRAINING SIMULATOR ROOM No. 1 429112 42911213 10.1 TR TRAINING CENTRE -1B,FF MOTOR TRAINING CENTRE SIMULATOR ROOM No. 1 339662 33966214 10.5 TR JUNIOR OFFICERS MESS (DINING HALL) No. 1 339662 33966215 10.9 TR OFFICERS CLUB (BAR & LOUNGE) No. 1 339662 339662


EPIL


Sheet- 1C16 6.3 TR GF FACULTY GUEST HOUSE No. 1 276801 27680117 10.2 TR FF FACULTY GUEST HOUSE No. 1 339662 33966218 16 TR GUEST HOUSE No. 1 579269 579269

B Indoor UnitsSupply, installation, testing & commissioning of Indoor Units consisting of 3/4 row deep DX coil, drainpan, drain pump kit, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integralrefrigerant piping, electronic expansion valve, electrical panel with controls, duly wired, thermostaticcontrol corded/cordless remote controller supports for indoor units etc. as required at site and as per

A) Ceiling Suspended Cassette Type Unit1 0.6 TR / 220 cfm FOR GF ADMINISTRATIVE BLOCK ASST.DIRECTOR ROOM Nos. 4 51198 2047922 0.6 TR / 240 cfm FOR GF ADMINISTRATIVE BLOCK ASST.DIRECTOR ROOM Nos. 2 51198 1023963 0.6 TR / 235 cfm FOR FF ADMINISTRATIVE BLOCK ASST.DIRECTOR ROOM Nos. 4 51198 2047924 0.6 TR / 300 cfm FOR FF ADMINISTRATIVE BLOCK ASST.DIRECTOR ROOM Nos. 1 53392 533925 0.7 TR / 300 cfm FOR FF ADMINISTRATIVE BLOCK ASST.DIRECTOR ROOM Nos. 1 53392 533926 0.8 TR / 300 cfm FOR FF ADMINISTRATIVE BLOCK DY.DIRECTOR ROOM Nos. 1 53392 533927 0.8 TR / 350 cfm FOR FF ADMINISTRATIVE BLOCK DY.DIRECTOR ROOM Nos. 1 53392 533928 0.8 TR / 300 cfm FOR GF ADMINISTRATIVE BLOCK RECORD ROOM Nos. 2 53392 1067849 0.9 TR / 366 cfm FOR FF ADMINISTRATIVE BLOCK DIRECTOR CUM CONFERENCE ROOM Nos. 3 53392 160176

10 0.9 TR / 400 cfm FOR FF ADMINISTRATIVE BLOCK VISITOR ROOM Nos. 1 53392 5339211 0.9 TR / 325 cfm FOR GF ADMINISTRATIVE BLOCK CANTEEN No. 2 53392 10678412 0.9 TR / 315 cfm FOR GF ADMINISTRATIVE BLOCK CANTEEN No. 2 53392 10678413 1.2 TR / 500 cfm FOR FF ADMINISTRATIVE BLOCK DY.DIRECTOR ROOM No. 1 54187 5418714 1.4 TR / 650 cfm FOR GF ADMINISTRATIVE BLOCK SERVER ROOM No. 2 55248 110496

B) Ceiling Suspended Ductable Type Unit

1 2.8 TR / 900 cfm FOR GF ADMINISTRATIVE BLOCK PREFUNCTION AREA Nos. 2 50028 1000562 2.7 TR / 900 cfm FOR GF ADMINISTRATIVE BLOCK No. 2 50028 1000563 3.6 TR / 1200 cfm FOR GF ADMINISTRATIVE BLOCK Nos. 2 59243 118486


EPIL


Sheet- 1C4 5.0 TR / 1500 cfm FOR GF ADMINISTRATIVE BLOCK Nos. 2 82502 1650045 3.0 TR / 1050 cfm FOR FF ADMINISTRATIVE BLOCK Nos. 2 45026 900526 3.4 TR / 1275 cfm FOR FF ADMINISTRATIVE BLOCK Nos. 1 59243 592437 3.1 TR / 1100 cfm FOR FF ADMINISTRATIVE BLOCK Nos. 1 51344 513448 4.3 TR / 1515 cfm FOR GF CLUB ROOM OFFICERS CLUB Nos. 1 82502 825029 6.54 TR / 1700 cfm FOR GF LOUNGE/DINING,(GUEST HOUSE) Nos. 2 82502 165004

10 6.54 TR / 1700 cfm FOR FF FIREARMS TRAINING SIMULATOR ROOM IN TRAINING BLOCK 1C Nos. 2 82502 16500411 8.19 TR / 2660 cfm FOR GF ACADEMY PRESS IN TRAINING BLOCK 1B Nos. 1 84257 8425712 8.19 TR / 2600 cfm FOR GF REFERENCE LIBRARY/KIOSKS IN TRAINING BLOCK 1B Nos. 4 84257 33702813 3.3 TR / 1200 cfm FOR GF REFERENCE LIBRARY/KIOSKS IN TRAINING BLOCK 1B Nos. 1 51344 5134414 6.54 TR / 2000 cfm FOR GF CLASS ROOM-1 (100 SEATER) IN TRAINING BLOCK 1A Nos. 2 82502 16500415 8.19 TR / 2700 cfm FOR GF CLASS ROOM-3 (50 SEATER) IN TRAINING BLOCK 1A Nos. 1 84257 8425716 4.75 TR / 1000 cfm FOR GF DRIVING SIMULATOR ROOM IN MOTOR TRAINING CENTER Nos. 2 82502 16500417 6.54 TR / 2000 cfm FOR GF DINING HALL IN JR.OFFICERS MESS (GIRLS) Nos. 2 82502 165004

C) Slim Ceiling Mounted Ductable Type Unit

1 3.2 TR / 1201 cfm FOR GF BILLIARDS ROOMOFFICERS CLUB Nos. 1 51344 513442 1.8 TR / 729 cfm FOR GF LOBBY OFFICERS CLUB Nos. 1 39934 399343 1.6 TR / 475 cfm FOR GF BAR OFFICERS CLUB Nos. 1 38071 380714 0.7 TR / 198 cfm FOR GF GUEST ROOM-1,(GUEST HOUSE) Nos. 1 34230 342305 0.9 TR / 260 cfm FOR GF GUEST ROOM-2,(GUEST HOUSE) Nos. 1 35107 351076 2.2 TR / 883 cfm FOR GF DINING,(FACULTY GUEST HOUSE) Nos. 1 48272 482727 0.6 TR / 242 cfm FOR GF GUEST ROOM-1,(FACULTY GUEST HOUSE) Nos. 1 34230 342308 0.6 TR / 277 cfm FOR GF GUEST ROOM-2,(FACULTY GUEST HOUSE) Nos. 1 34230 342309 0.6 TR / 330 cfm FOR GF GUEST ROOM-3,(FACULTY GUEST HOUSE) Nos. 1 34230 34230

10 0.6 TR / 294 cfm FOR GF GUEST ROOM-4,(FACULTY GUEST HOUSE) Nos. 1 34230 3423011 0.6 TR / 323 cfm FOR FF GUEST ROOM-5,(FACULTY GUEST HOUSE) Nos. 1 34230 3423012 0.7 TR / 367 cfm FOR FF GUEST ROOM-6,(FACULTY GUEST HOUSE) Nos. 1 35107 3510713 0.6 TR / 308 cfm FOR FF GUEST ROOM-7,(FACULTY GUEST HOUSE) Nos. 1 34230 3423014 0.5 TR / 246 cfm FOR FF GUEST ROOM-8,(FACULTY GUEST HOUSE) Nos. 1 34230 3423015 0.6 TR / 308 cfm FOR FF GUEST ROOM-9,(FACULTY GUEST HOUSE) Nos. 1 34230 3423016 0.6 TR / 330 cfm FOR FF GUEST ROOM-10,(FACULTY GUEST HOUSE) Nos. 1 35107 35107


EPIL


Sheet- 1C17 0.6 TR / 294 cfm FOR FF GUEST ROOM-11,(FACULTY GUEST HOUSE) Nos. 1 34230 3423018 0.6 TR / 251 cfm FOR GF DINING IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 34230 6846019 0.7 TR / 276 cfm FOR GF LIVING IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 34230 6846020 0.7 TR / 287 cfm FOR GF GUEST BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 34230 6846021 1 TR / 465 cfm FOR GF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 38531 7706222 0.3 TR / 139 cfm FOR GF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 34230 6846023 0.7 TR / 282 cfm FOR GF DINING IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 34230 6846024 0.7 TR / 261 cfm FOR GF LIVING IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 34230 6846025 1.1 TR / 509 cfm FOR GF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 38531 7706226 0.3 TR / 139 cfm FOR GF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 34230 6846027 0.8 TR / 311 cfm FOR GF DINING IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846028 0.7 TR / 289 cfm FOR GF LIVING IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846029 0.7 TR / 299 cfm FOR GF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846030 0.3 TR / 123 cfm FOR GF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846031 1.1 TR / 475 cfm FOR FF MASTER BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 38531 7706232 0.9 TR / 408 cfm FOR FF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 35985 7197033 0.4 TR / 408 cfm FOR FF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-A Nos. 2 35985 7197034 0.8 TR / 353 cfm FOR FF MASTER BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 35107 7021435 0.9 TR / 397 cfm FOR FF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 35985 7197036 0.4 TR / 161 cfm FOR FF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-B Nos. 2 34230 6846037 0.8 TR / 357 cfm FOR FF MASTER BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 35107 7021438 0.7 TR / 291 cfm FOR FF BEDROOM IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846039 0.4 TR / 159 cfm FOR FF LOBBY IN DY.DIRECTOR RESIDENCE BLOCK-C Nos. 2 34230 6846040 0.7 TR / 295 cfm FOR GF BEDROOM IN DIRECTOR RESIDENCE Nos. 1 34230 3423041 0.4 TR / 181 cfm FOR GF GUEST BEDROOM IN DIRECTOR RESIDENCE Nos. 1 34230 3423042 0.4 TR / 163 cfm FOR GF ENTRANCE FOYER IN DIRECTOR RESIDENCE Nos. 1 34230 3423043 0.4 TR / 135 cfm FOR GF OFFICE IN DIRECTOR RESIDENCE Nos. 1 34230 3423044 0.4 TR / 155 cfm FOR GF STAFF OFFICE IN DIRECTOR RESIDENCE Nos. 1 34230 3423045 1TR / 408fm FOR GF LIVING ROOM IN DIRECTOR RESIDENCE Nos. 1 35985 3598546 0.8TR / 306 Cfm FOR GF DINING ROOM IN DIRECTOR RESIDENCE Nos. 1 34230 3423047 0.7 TR / 231 Cfm FOR GF CORRIDOR IN DIRECTOR RESIDENCE Nos. 1 34230 3423048 1.0 TR / 427 Cfm FOR FF BED ROOM IN DIRECTOR RESIDENCE Nos. 1 38531 3853149 1.3 TR / 577 Cfm FOR FF MASTER BED ROOM IN DIRECTOR RESIDENCE Nos. 1 39934 39934


EPIL


Sheet- 1C50 0.8 TR / 304 Cfm FOR FF CORRIDOR IN DIRECTOR RESIDENCE Nos. 1 34230 34230

D) TFA1 4.6 TR / 600cfm FOR GF CONFERENCE HALL (ADMINISTATIVE BLDG.) Nos. 2 149644 2992882 5.3 TR / 960cfm FOR GF ADMINISTATIVE BLDG. Nos. 1 156666 1566663 4.6 TR / 820cfm FOR GF ADMINISTATIVE BLDG. Nos. 1 149644 1496444 4.0 TR / 750cfm FOR FF ADMINISTATIVE BLDG. Nos. 1 149644 1496445 3.2 TR / 750cfm FOR FF ADMINISTATIVE BLDG. Nos. 1 149644 149644

E) Energy Recovery VentilatorSupply, Installation.testing & Commisioning of Energy Recovery Ventilator incorporating Heat Recovery Wheel complete with forward curved centrifugal fans with drive and motors,supply and exhaust filter section with synthetic prefilters, 3 angstom molecular seive coated heat recovery wheel as per

ifi i d i bl f f ll i i i i h ibl l d1 899 CFM FOR GF OFFICERS CLUB Nos. 1 166759 1667592 2086 CFM FOR GF GUEST HOUSE Nos. 1 339926 3399263 336 CFM FOR GF FACULTY GUEST HOUSE Nos. 1 81159 811594 168 CFM FOR FF FACULTY GUEST HOUSE Nos. 1 66704 667045 1221 CFM FOR FIRE ARMS SIMULATOR ROOM IN FF TRAINING BLOCK 1C Nos. 1 173167 1731676 2266 CFM FOR REFERENCE LIBRARY IN GF TRAINING BLOCK 1B Nos. 1 346334 3463347 770 CFM FOR ACADEMY PRESS IN GF TRAINING BLOCK 1B Nos. 1 166759 1667598 1100 CFM FOR CLASS ROOM-1(100 SEATER) IN GF TRAINING BLOCK 1A Nos. 1 173167 1731679 600 CFM FOR CLASS ROOM-3(50 SEATER) IN GF TRAINING BLOCK 1A Nos. 1 93034 93034

10 1530 CFM FOR DRIVER SIMULATOR ROOM IN GF MOTOR TRAINING CENTRE Nos. 1 259793 25979311 1456 CFM FOR DINING HALL IN JR.OFFICERS MESS- GIRLS Nos. 1 259793 25979312 154 CFM FOR BLOCK-A IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340813 99 CFM FOR BLOCK-A IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340814 141 CFM FOR BLOCK-B IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340815 98 CFM FOR BLOCK-B IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340816 126 CFM FOR BLOCK-C IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340817 98 CFM FOR BLOCK-C IN DY DIRECTOR RESIDENCE Nos. 2 66704 13340818 319 CFM FOR GF DIRECTOR RESIDENCE Nos. 1 81159 8115919 141 CFM FOR FF DIRECTOR RESIDENCE Nos. 1 66704 66704


EPIL


Sheet- 1C

Notes:1) The vendor can offer the outdoor units in multiple of the capacity in H.P. as per availability from

the manufacturer, however keeping the same tonnage.2) The indoor units CFM / TR capacity can be also as per availability from the manufacturer.3) Above points no.1 & 2 shall be accepted subject to approval by Consultant.

TOTAL : SUB-HEAD - I 18929412


EPIL


Sheet- 1C

PART - B

SUB-HEAD - II : AIR DISTRIBUTION SYSTEM, INSULATION & ELECTRICAL

1 Supply, Installation and testing of G.S.S. sheet metal ducting complete with canvass connections, vanesetc. as required and as per specifications & as per approved shop drawings.

a) 24 Gauge (duly insulated with 9mm thick closed cell/cross linked elastomeric / polythylene insulation asper specifications.. Sqm. 1480

902 1334960

2 Supply, installation & testing of powder coated extruded aluminium grilles/diffusers.a) Fixed Bar linear grille with flanges on all the four sides. Sqm. 26 6636 172536b) Square Diffusers with removable core with dampers Sqm. 11 7583 83413c) Square Diffusers with removable core without dampers Sqm. 13 7583 98579d) Exhaust Air Grilles (Horizontal type for Toilet Exhaust) RO

3 Aluminium Volume Control Dampers to be provided in supply air grilles/diffusers. Sqm. 15 4320 64800

4 G.I. Volume Control Dampers (box type) to be provided in supply air duct RO

5 Supply and fixing of fresh/exhaust air intake aluminium louvers complete with bird screen and damper. Sqm. 11 5917 65087

6 Supply and fixing resin bonded fibre glass 25mm thick rigid board of 48Kg/cum density acoustic insulationin supply/return air ducting covered with glass cloth and perforated aluminium sheet complete as perspecification. Sqm. 114

638 72732

7 Supply and installation of imported Refrigerant Y joints. Lot


EPIL


Sheet- 1C8 Supplying & Installation of interconnecting copper tube refrigerant piping of various sizes (6.07mm dia to

28.6 mm dia) and as required and as suitable to the individual indoor units, duly insulated with 19 / 13 mmthick tubular type closed cell/cross linked elastomeric nitrile rubber / polyethylene foam as perspecifications in between each set of indoor and outdoor units inclusive of refrigerant as required dulyfixed, mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc. as required at site Lot

Note :- 1) The dia and length of refrigerant piping shall be as per manufacturer standard and as perroute/length feasible at site.2) The insulation thickness upto 19 mm dia pipe shall be 13mm and above 19mm dia insulation

9 DRAIN PIPINGProviding and fixing of Rigid uPVC/ polypropylene(PPR) Piping complete with fittings, supports as perspecifications and duly insulated with 6mm thick closed cell/cross linked/ Elastomeric nitrile rubber/polyethylene foam insulation etc. complete as per specifications and as required at site.

i) 25 mm dia. Rmt. 902 394 355388ii) 40 mm dia RO

TOTAL : SUB-HEAD - II 2247495


EPIL


Sheet- 1C

PART - B

SUB-HEAD - III : SPLIT TYPE AIR CONDITIONING UNITS

1 Supply, installation, testing & commissioning of Split Type air cooled, AC units with in-built Inverterconsisting outdoor units, Indoor units as detailed, complete with standard factory supplied power & controlpanels with corded remote control, interconnecting copper refrigerant piping (upto 20 meters) insulatedwith insulation tubing as required, interconnecting power and control cabling, all mounted on mild steelpowder coated ladder type trays neatly clamped to wall / slab, as per specifications.

1 1 TR ,416 CFM GF BLOCK A MASTER BEDROOM ASST.DIRECTOR RESIDENCE Nos. 4 67581 2703242 1 TR,418 CFM GF BLOCK B MASTER BEDROOM ASST.DIRECTOR RESIDENCE Nos. 4 67581 2703243 1.1 TR,451 CFM FF BLOCK A MASTER BEDROOM ASST.DIRECTOR RESIDENCE Nos. 4 70214 2808564 1.1 TR,453 CFM FF BLOCK B MASTER BEDROOM ASST.DIRECTOR RESIDENCE Nos. 4 70214 2808565 1.3 TR,589 CFM FF BLOCK C MASTER BEDROOM ASST.DIRECTOR RESIDENCE Nos. 2 70214 1404286 5 TR, 396 CFM FOR FORENSIC LABORATORY-3 IN GF TRAINING BLOCK 1D Nos. 1 214154 2141547 5 TR, 396 CFM FOR LABORATORY-4 IN GF TRAINING BLOCK 1D Nos. 1 214154 2141548 5 TR, 396 CFM FOR LABORATORY-5 IN GF TRAINING BLOCK 1D Nos. 1 214154 2141549 4.6 TR, 319 CFM FOR COUNCILLING ROOM-3 IN GF TRAINING BLOCK 1D Nos. 1 152716 152716

10 4.6 TR, 319 CFM FOR COUNCILLING ROOM-4 IN GF TRAINING BLOCK 1D Nos. 1 152716 15271611 2.8 TR, 1370 CFM FOR MINOR OT IN HOSPITAL BLOCK Nos. 2 140429 28085812 1 TR, 408 CFM FOR DOCTOR ROOM IN HOSPITAL BLOCK Nos. 1 67581 6758113 1 TR, 408 CFM FOR DOCTOR ROOM IN HOSPITAL BLOCK Nos. 1 67581 6758114 1.4 TR, 572 CFM FOR SR.OFFICERS ROOM-1 IN HOSPITAL BLOCK Nos. 1 70214 7021415 1.4 TR, 572 CFM FOR SR.OFFICERS ROOM-2 IN HOSPITAL BLOCK Nos. 1 70214 7021416 6.5 TR, 2069 CFM FOR SR.OFFICERS MESS DINING HALL Nos. 1 229075 22907517 1.4 TR FOR ADMINISTRATIVE BLOCK SERVER ROOM STAND BY Nos. 2 70214 140428

2 DRAIN PIPING


EPIL


Sheet- 1CProviding and fixing of Rigid uPVC/ polypropylene(PPR) Piping complete with fittings, supports as perspecifications and duly insulated with 6mm thick closed cell/cross linked/ Elastomeric nitrile rubber/polyethylene foam insulation etc. complete as per specifications and as required at site.

i) 25 mm dia. Rmt 180 394 70920ii) 40 mm dia RO

TOTAL : SUB-HEAD - III 3187553


Documents

TENDER DOCUMENT TENDER No DLI/CON/633/379 FORengineeringprojects.com/Tender/UploadFiles/1837_Volume-III.pdf · 23 AOR23 Supply, Installation, testing & commissioning of bulk head