Upload
papamalote
View
231
Download
0
Embed Size (px)
Citation preview
7/30/2019 TEd Documentation 1.0
1/39
TEd DocumentationThe Creative Assembly
7/30/2019 TEd Documentation 1.0
2/39
Table of Contents
1. Creating Your First Map in TEda.
Getting Started
b. View Navigationc. Creating and Editing Terraind. Adding Detail and Featurese. Finalising your Mapf. Adding info to your mapg. Loading your map in game
2. User Interface Descriptiona. Select Tab
i. Vertexii. Object
b. Create Tabi. Instance Brush
ii. Vegetationiii. Buildingsiv. Go/No-Go Regionsv. Deployment Zones
vi. Terrain Decalsvii. EF Lines
viii. Capture Locationix. Zonesx. Particle Effects
xi. Tape Measurexii. AI Hint Polygons
xiii. Draw Modec. Paint Tab
i. Blendii. Height
d. File Menue. Edit Menuf. Environment Menug. Options Menuh. Scene Graph / Instance Listi. Property Panel
3. Keyboard Shortcuts4. Building Categories5. Bugs / Known Issues
7/30/2019 TEd Documentation 1.0
3/39
Creating Your First Map in TEd
The following is a guide to creating your first Total War: Shogun 2 map.
1. Getting Started Open Steam. Select Library. Select the drop down box with the default name ALL GAMES and select TOOLS. Select and install Total War: SDK. Once installed run Total War: SDK. You will now be presented with a Total War: SDK menu. Select TEd to run it. Congratulations. Youve loaded the Total War editor, TEd.
2. View NavigationThere are multiple ways to navigate through TEds 3D view.
Keys [W] [S] [A] [D] move the camera forwards, backwards, strafe left and strafe right. Holding the [MIDDLE MOUSE BUTTON] and dragging the mouse in an inverse direction also
moves the camera forwards, backwards, strafe left and strafe right.
Holding [ALT] + [MIDDLE MOUSE BUTTON] allows you to rotate the camera around the 3Dview. This can also be achieved by holding [MIDDLE MOUSE BUTTON] + [RIGHT MOUSE
BUTTON] or by using the [Q] [E] keys.
Scrolling the [MIDDLE MOUSE BUTTON] forwards and backwards zooms the camera in andout.
3. Creating and Editing Terrain Create a new battlefield by selecting File > New Battlefield and select Ok.
(THIS IS VERY IMPORTANT!)
Once done use the navigation controls to fly around and familiarise yourself with the map.Upon doing this you should notice two things. Firstly the red box and blue box. These boxes
are deployment zones. They define where each army will deploy in game. These are
described in more detail here. The second item you will notice is a larger yellow box. This
box defines the maximum playable area. Anything outside of this point will be beyond game
logic and only act as a visual prop within your map.
Now lets add some mountains to this featureless map. Select the Paint tab in the top lefthand corner.
From the Paint Channel dropdown menu select Height. From the Brush drop down menu, select the brush Mountain_16x8_ae_135 In order to get the right effect from this brush we need to make it bigger. In the Scale
input box drag the slider to the maximum value or simply enter 1000 into the box.
7/30/2019 TEd Documentation 1.0
4/39
Since we want to add terrain using this brush we need to change the blend mode. In theBlend Mode drop down box, select Additive.
We also need to change how much terrain is added when we click the mouse. To do thissimply change the value in the Height input box enter 100 here.
Now move the mouse to the edges of the yellow boundary playing area and click once. If youwant a bigger mountain click again in the same place. Congratulations, youve just created a
mountain.
You can repeat the processes above using a combination of different brushes, scales andheights to create a nice environment for your battlefield. Heres one I made earlier:
If you make a mistake dont worry, simply change the Blend Mode drop down box toNormal / Absolute (this will raise or lower the terrain to a uniform height) the defaultheight for terrain in TEd is 10 so enter this into the Height input box and using the
hard_brush you can change any terrain back to its default.
7/30/2019 TEd Documentation 1.0
5/39
4.Adding Detail and Features Now its time to add some detail to our map with a forest. While still in the Painttab, select Blend from the Paint Channel. This will allow us to
paint the Battlefield with different ground types.
Make sure that the Ground Type selection is set to Forest, and this time were going tobe using the Gradient_Round_2x2 brush.
We need the brush to be a bit larger so in the Scale input box change this to 100. Now in order to give the impression that the grass terrain blends in seamlessly with the
forest terrain we need to change the pressure of the brush. This can be changed with the
Pressure input box this works on a scale of 0 to 1 so enter to value of 0.5 here.
Click the mouse anywhere on the battlefield to paint the forest type here. If you hold downthe mouse you get a stronger effect so I find repeatedly clicking the best option.
If you make a mistake, simply change the Ground Type back to Grass which is the defaultground type and paint over any mistakes.
When satisfied with the result its time to add some trees. Go to the Create menu in thetop left hand corner and select Vegetation from the Object Type drop down menu. This
feature is described in much more detailhere.
Click the select_trees button to see the available trees for placement. Select a species typefrom the top left window and then click the -> arrow to add that species to the current
selection (a preview of that tree can be seen in the preview window below the variant
selection). This can be done for any combination of trees you like, or alternatively select a
pre-set selection from the menu on the right hand side and click Load selection..
When happy with your selection, press OK to close the select_trees window. There are two methods available for placement of treesSingle or Brush. Here we are going
to be using Brush so select it from the Mode drop down menu.
Change the scale of the brush higher (I used 40) and simply paint over the forest areas youcreated earlier.
If you want to delete or move trees around, simply use the Select tab, or alternatively youcan select objects in theInstance List. You should end up with something similar to this;
7/30/2019 TEd Documentation 1.0
6/39
Now lets add some buildings to our battlefield. While still under the Create tab, select Buildings from the Object Type drop down menu. A description on placement of Buildings can be foundhere The Model Selection drop down menu contains a list of all the available buildings that can
be placed into the battlefield, which includes Castle pieces if you want to create your own
castle for a siege type map. Here were going to be using the
plains_village_buildings_large_house buildings so select one ofthem from the Model
Selection drop down menu.
The building will appear on the end of the mouse. Hold down the [ALT] key and move themouse left or right to rotate the building before placement and simply click to place.
Similar to Vegetation you can always use the Select tab to re-select buildings to move,rotate or delete any building you have placed.
Select another building from the Model Selection drop down menu and place it onto thebattlefield. I used a combination of different houses and rocks to create a small settlement.
You can also use the Height and Blend Paint Channels described earlier to raises parts of theterrain and make a dirt path by selecting the Mud ground type under the Blend paint
channel (used in the same way as creating a forest area)
You can use the same process described above to place as many trees or buildings as youlike. I created a few more similar looking settlements and also added some terrain height
variation in the middle of the map.
7/30/2019 TEd Documentation 1.0
7/39
5. Finalising your Map When satisfied with the amount of detail you have added to your map its time to add the
finishing touches and finalise your map ready for play.
If Deployment Zones are not already present on your map (they get added automatically ifyou select New Battlefield from the File Menu) we need to add them in.
From the Create tab, select Deployment Zones from the Object Type menu. Deployment Zones are described in much more detailhere. Choose an area on the map you would like your first army to start. Click the [LEFT MOUSE
BUTTON] to place the first vertex of the deployment zone, click in the same fashion to place
additional vertices to create the outline of your zone, and to close the zone up simply place
the last vertex on top of the first. This is your first Deployment Zone you need to create
another one for the opposing army with a different Alliance ID. You can read how to do this
here.
Time to save your battlefield - to do this go to the File menu and select Save Battlefield.Enter a map name in the entry box and hit Save. Simple.
6.Adding info to your map When we save our map a file is created that stores information about it so when it is shared
in game, the relevant information is displayed to other players such as the map name, type
and author.
This information is stored in an XML file located in the map folder where TEd saved it to. Adetailed explanation ofXML files can be found on the following websites;
o http://www.w3schools.com/xml/o http://en.wikipedia.org/wiki/XML
Navigate to the directory where TEd saves maps to and open a map folder. For Windows 7 and Windows Vista users by default your maps will be saved in the following
directory (where is the name of the current user logged on:
C:\Users\\AppData\Roaming\The Creative Assembly\Shogun2\maps
For Windows XP users the directory would be:
C:\Documents and Settings\\Application Data\The Creative
Assembly\Shogun2\maps
http://www.w3schools.com/xml/http://www.w3schools.com/xml/http://en.wikipedia.org/wiki/XMLhttp://en.wikipedia.org/wiki/XMLhttp://en.wikipedia.org/wiki/XMLhttp://www.w3schools.com/xml/7/30/2019 TEd Documentation 1.0
8/39
The xml file is called map_info.xml and it needs to be edited with our own information. Thefile looks like this;
My First Shogun 2 Map
My First Shogun2 Map
The Creative Assembly
land
1
1
1.0
false
The text in bold is the information you need to replace with your own which is identified bythe tag in brackets before it.
o = The name of you map and how it will be shown to others.o = Used to describe your Battle map type.o = Who the map was made by (e.g. yourself)o = The type of map. Either land, naval or siege.o and = The different sizes of each team.
The possible combinations are 1v1, 2v2, 3v3 and 4v4.
o =
The ratio applied to the defending sides budget
on siege maps. Usually on a scale of0-1.
o = true or false whether your map contains keybuildings or not.
Another bit of information you can add to your map is a screenshot icon. This is designed tobe a preview of the map you have created which is also shown to other players who
download your map.
In order for this to work correctly, the preview icon needs to be contained within the mapfolder in the same way the map_info.xml is stored (which is outlined above).
The file needs to be called icon.tga and it needs to have a resolution of512x256 pixels.Many common image editing programs allow you to save images as a TGA file.
When you save your battlefield, a default image is created in the map folder which you cankeep or edit if you desire.
7/30/2019 TEd Documentation 1.0
9/39
7. Loading your map in game There are two areas in Shogun 2 where you can play your custom made maps.
o Custom Battleo Multiplayer Battle
While in any of these two areas you can load your custom map the same way you wouldselect a normal map.
If in a Multiplayer Battle and your opponent does not have the map you have selected theywill begin downloading it on their machine. Be patient this takes a while. After it has been
downloaded the battle can begin.
Maps are downloaded to the same directory on their machine as maps are saved to onyours.
You can edit other player maps that you have downloaded and re-share them!
7/30/2019 TEd Documentation 1.0
10/39
User Interface Description
Select TabThe Select Tab allows you to select objects that have been placed into the battlefield.
There are two types of Selection available from the Selection filter;
TIP: Use the keyboard shortcut [CTRL + 1] to quickly access the Select Tab
Vertex
Vertex selection allows you to select and reposition vertices for object types such as Zones
or Deployment Areas (these will be described in much more detail later on)
ObjectObject selection allows you to select and reposition objects such as Trees or Buildings using
the three-dimensional jack manipulator. This allows you to select an object to change its
properties or to delete the object by pressing [DEL].
While in Select mode, you can also click and hold down the [LEFT MOUSE BUTTON] and drag
the mouse to create a selection box around multiple objects to quickly select more than one.
You can also add more objects to your current selection by holding down the [CTRL] key and
clicking the [LEFT MOUSE BUTTON] on any other object in the scene.
Create TabThe Create Tab is the hub from which all map content is produced. Here you can add buildings,
trees, particle effects and much more. This content is separated into different sections listed under
Object Type which are outlined below.
TIP: Use the keyboard shortcut [CTRL + 2] to quickly access the Create Tab
Instance Brush
The Instance Brush is a powerful tool that allows you to save any combination of objects
(trees, buildings etc.) into a pre-set brush which can be used to quickly repeat large sectionsof objects.
In order to use the Instance Brush you must first save a selection of objects to a brush. In
order to do this:
1. Go to the Select Tab and select the objects you want to save a brush.2. Go to the Edit file menu3. Select Save Selection as brush or alternatively use the keyboard shortcut
[CTRL + B]
7/30/2019 TEd Documentation 1.0
11/39
Now go back to the Create Tab and select Instance Brush from the Object Type drop down
menu. Under this sub menu there is another menu named Brush Selection this is where all
your custom Instance Brushes are stored, by default the naming convention is Brush 0,
Brush 1, Brush 2 etc.
You also have the ability to save out Instance Brushes to an .xml file, so they can be re-
loaded next time you load TEd. Under the Instance Brush sub menu there are two buttons:
1. Savea. This will bring up the Windows Save File dialogue. Browse to a location
on your computer, type a file name followed by .xml e.g. Brush1.xml
2. Loada. This will bring up the Windows Open File dialogue. Browse to the
location where you saved the file previously, select it and click Open.
The brush will now appear under the Brush Selection menu.
Vegetation
The Vegetation menu allows you to place trees, props and other vegetation onto the
battlefield. In order to do this you must first select the trees you want - this is done by
clicking the Select_Trees button while under the Vegetation sub menu.
On the left hand side of the Select_Trees menu there is a list of all the available tree species
called Species Selection - select a species which will then show all the different Variants
available underneath.
Hover over the arrow button -> to see a preview of that particular tree in the Preview
window, then click the -> arrow to add that variant to the current selection. To remove a
particular variant from the current selection, click the
7/30/2019 TEd Documentation 1.0
12/39
When you have a number of variants in the current selection, press OK
There are two options available for the actual placement of trees which can be selected
from the Mode drop down menu:
1. Singlea. Clicking will place one tree at a time. If you have multiple variants loaded into
your current selection, the chance that each tree will be placed is based on the
Relative Probability slider in the Select_Trees window, as outlined earlier.
2. Brusha. Uses a circular brush that can be painted to place multiple trees at a time. The
size of this brush can be changed by changing the Scale input box.
TIP: Use the keyboard shortcuts [and] to quickly change the Scale.
b. You can also change the pressure of the brush by changing the value in thePressure input box. A smaller pressure value means that less trees will be
placed when using the brush a larger value means that more will be placed.
Buildings
The Buildings menu allows you to place a number of buildings onto the battlefield which
includes placement of castle pieces to create castles for siege maps.
The Model Selection drop down menu contains a list of all the buildings available to be
placed onto the battlefield. Click this and choose a building from the menu. The selected
building will now appear on the mouse cursor click the [LEFT MOUSE BUTTON] to place
the building.
TIP: Hold down the [ALT] key and move the mouse left or right to change the orientation of
the building before it is placed.
There are also different ways of placing multiple buildings onto the battlefield, similar to
how the Brush mode works for placing Vegetation. These methods are under the Draw
Mode menu these are described in a separate section later on as they are relevant for
other object types also.
To place a different building onto the map simply use the Model Selection drop down
menu and select a different building.
Buildings are categorised differently and play different roles depending on the type of map
and how they are placed. For a full list of the different buildings and what category they fall
under please see the Building Category list.
7/30/2019 TEd Documentation 1.0
13/39
Go/No-Go Regions
There are two options available from the Hard Outline Type menu:
1. Go Regionsa. Go Regions are polygons that define areas of traversable terrain. These Go
Regions overwrite generated terrain path finding data, they do not overwrite
model path finding data.
2. No-Go Regionsa. The opposite of a Go Region this defines an area that will be off limits by units
to travel across, and they will not be able to traverse this area.
When you have selected the type you want, click anywhere on the battlefield to place the
first vertex of the polygon, then a line will appear from this point until you click to place the
second vertex. Continue in this fashion to define the shape of the region, and click the last
point to the first point to complete and join the region together.
TIP: Press the [ESC] key or the [RIGHT MOUSE BUTTON] during the region creation process
to cancel the placement of vertices.
Deployment Zones
Deployment Zones allow you to define the starting position of armies on the battlefield. In
order to do this:
1. When the Deployment Zones object has been selected from the Create tab, clickanywhere on the battlefield to place the first vertex of the zone, followed by the secondvertex and any subsequent vertices until the region has been defined, then place the last
vertex on top of the first to close the zone up.
2. Follow the same process in step one to place the second deployment zone for theopposing army.
Each deployment zone will need to have a different Alliance ID for each respective army.
BUG: The Alliance ID cannot be changed from the initial Deployment Zone menu. In order
to change it and ensure that Deployment Zones are saved out correctly please use the
following workaround:
1. Place the Deployment Zone as outlined above.
2. Go to the Instance List on the right of the screen and expand the Layers node
3. Expand the Base Layer node
4. Scroll down to the Deployment Zone entry in the Instance List and select it
5. In the property panel section below, find the entry for Alliance ID and drag the slider
or enter a 1 in the value box.
6. The Deployment Zone should have now turned blue
7. Both a red (0) and blue (1) deployment zone need to be present in order for them to
save correctly.
7/30/2019 TEd Documentation 1.0
14/39
Terrain Decals
Terrain Decals are flat two-dimensional images that can be placed onto the battlefield to
give extra detail to the battle terrain. Placement of Terrain Decals is very similar to
placement of buildings.
1. While under the Terrain Decal sub menu, use the Decal Selection drop down menu tochoose a decal that you wish to place. The square brush outline will appear.
2. Use the [LEFT MOUSE BUTTON] and click anywhere on the battlefield to place theTerrain Decal.
TIP: Hold down the [ALT] key and move the mouse left or right to change the orientation of
the terrain decal before it is placed.
EF Lines
EF Lines, short for Entity Formation Lines are a special type of object that will cause units to
perform a specific action when placed over them. This specific action can be selected by
using the Purpose drop down menu which contains options such as High Wall,
Boarding or Tree.
EF Lines are slightly different in that in order to function correctly; they must be placed
inside a Zone which is another object type. To create an EF Line instance, follow the
instructions below:
1. From the Create tab, select Zones from the drop down list.2. Create a Zone by placing the first vertex, then the second, then as many as you wish,
then join the last vertex with the first in order to close the Zone up.
3. From the Create tab, select EF Lines.4. From the Purpose drop down menu, select the desired Entity Formation5. The placement of vertices for the EF Line must be inside the Zone you just created
Capture Location
Capture Locations are primarily used in siege type battle maps inside created castles. They
should be placed next to buildings such as towers, keeps or gates and are automatically
assigned to the nearest building they are placed next to.
To place a Capture Location, go to the Create Tab and select Capture Location from the drop
down menu and then use the [LEFT MOUSE BUTTON] to place it onto the battlefield.
You can change the size of the Capture Location by going to the Select Tab ([CTRL + 1]) and
clicking and dragging the pink box on the outer circle of the Capture Location which should
increase or decrease its size.
7/30/2019 TEd Documentation 1.0
15/39
Zones
Zones on their own do not provide much purpose, but instead are used as a container of
sorts for other object types. As stated in the section on EF Lines, EF Lines should always be
contained within a Zone in order to function correctly.
Another use for Zones is when creating Castle wall pieces, a zone should be placed around
the wall as each castle piece contains EF Lines.
Particle Effects
Particle Effects allow you to add a wide variety of different effects onto your battlefield such
as fire, explosions, water and even spurting blood.
Particle Effects are separated into two main sub menus;
1. Current Effect Groupa.
Contains a list of all available effects that can be placed into the game. This iswhat you must use. Each Current Effect Group is made up of a number of
individual Current Effects.
2. Current Effecta. Contains all the different effects that can be combined together to form a
Group.
Simply select the effect you desire from the Current Effect Group menu and click anywhere
on the battlefield to place it. There is also an option to Create Emitter which means the
effect will appear and be selectable in the instance list. This option needs to be selected in
order for Particle Effects to appear in game.
In order to see the effect as it would appear in game, you will need to click the Play button
which is part of the Animation Editor in the bottom left hand corner of the screen.
In order to stop the Particle Effects from playing, simply click the Stop All Effects button
which is on the Particle Effects sub menu of the Create Tab.
Tape Measure
Tape Measure is exactly what it sounds like - a tool that is used in order to measure
distances between objects or anything within TEd.
Simply use the [LEFT MOUSE BUTTON] to click and drag to any other point in the map to
create a straight line. In the Property Panel section of the User Interface it will display the
length of the line you have just created.
7/30/2019 TEd Documentation 1.0
16/39
AI Hint Polygons
AI Hint Polygons function similar to EF Lines - when placed onto the battlefield they would
instruct units that walk over them to carry out a certain purpose or function. The placement
of these zones is the same as placing any other zone.
1. Select the AI Hint Polygon sub menu from the Create Tab.2. Select the type of hint that you wish to place from the Hint Type drop down menu.3. Click anywhere with the [LEFT MOUSE BUTTON] on the Battlefield to place the first
vertex of the polygon.
4. Use the mouse to move and place the second vertex of the polygon by left clicking.5. Continue in this fashion until the polygon has been created6. Join the last vertex up with the first to close the polygon.
Draw Mode
For all the available objects that can be placed onto the battlefield there are different
methods of being able to place them which come in the form of different draw modes which
are outlined below.
1. PointThis is the default method. Click once with the [LEFT MOUSE BUTTON] to place a single
iteration of the particular object that you have selected.
2. FreehandThis is similar to the Point draw mode with the difference of instead of clicking once to place
the object you can click and hold down the [LEFT MOUSE BUTTON] while dragging the
mouse to place multiple instances of the selected object.
3. LineUse the [LEFT MOUSE BUTTON] to click and drag to form a straight line which the selected
object will appear along that line at determined intervals. Uncheck the Match Spacing to
Objectoption and alter the Spacing input in order to define how close together that
object will appear along that line.
4. SquareSimilar to the Line draw mode, however the objects will be placed in a square formation
instead of a line. Click and hold the [LEFT MOUSE BUTTON] and drag the mouse to form the
square. The separation between the objects can be changed with the Match Spacing to
Objects and Spacing options.
5. CircleThe circle draw mode allows you to place objects in a circular formation. Click and hold the
[LEFT MOUSE BUTTON] while dragging the mouse to form the circle of objects. The further
you move the mouse from the original point of creation, the larger the circle will be.
7/30/2019 TEd Documentation 1.0
17/39
6. PolygonSimilar to the Line draw mode, the polygon draw mode allows you to place objects along the
lines of any shape you desire. Simple click the [LEFT MOUSE BUTTON] to place the first
vertex of the polygon, and then place any subsequent polygons in the shape you like. The
objects will line along the edges.
Paint Tab
Blend
The Blend Channel allows you to paint the battlefield with different ground types that suit
different areas and features of the map. For example, use the Forest ground type in areas
that contain large amounts of trees or use the Sand ground type on maps surrounded by
water.
The blend channel is separated into the following sections;
1. Ground Typea. Forestb. Sandc. Rockd. Mude. Grass
BUG: Rock is a redundant ground type and does not work. Instead rock will appearautomatically on terrain that has been raised or lowered.
2. Brusha. There are many different Brushes available for terrain painting. Using a
combination of different brushes and different scales can result in nice effects.
3. Blend Modea. This is more relevant for changing terrain height (described in the next section).
4. Scalea. Used to change the size of the brush. Increase the scale to cover a larger area of
the map when painting.
TIP: Use the keyboard shortcuts [ and] to quickly change the Scale.
5. Pressurea. Changes how hard the pressure of the brush affects the map. On a scale of 0 to
1, a small pressure will result in a very light change to the terrain whereas a high
pressure will result in a heavy effect.
7/30/2019 TEd Documentation 1.0
18/39
Height
The Height channel allows you to raise or lower the terrain in order to form hills, slopes, gradients or
even mountains. All of the same options are available as the blend channel; however the Blend
Mode contains options such as;
1. Normal / AbsoluteRaise or Lower the terrain to a uniform height, regardless of what its previous height was.
The default height for terrain is 10 (which can be entered into the Height input box).
2. AdditiveRaise the terrain according to the Height value which is added onto what the previous value
was.
3. SubtractiveLower the terrain according to the Height value which is subtracted from what the previous
value was.
4. SmoothSmooth the area of terrain selected.
There are other options available also but these four will produce the most desired effect. Use a
combination of Brush, Scale, Pressure and Blend Mode in order to create different terrain types. The
best way is to experiment and discover what works best.
File Menu
1. New BattlefieldCreates a new, empty battlefield with nothing but deployment zones present. Dont worry, a
prompt is shown asking if you have saved your previous work before starting fresh.
2. Load BattlefieldBrings up the load file menu which contains all your previously saved maps.
For Windows 7 and Windows Vista users by default your maps will be saved in the following
directory (where is the name of the current user logged on:
C:\Users\\AppData\Roaming\The Creative Assembly\Shogun2\maps
For Windows XP users the directory would be:C:\Documents and Settings\\Application Data\The Creative
Assembly\Shogun2\maps
7/30/2019 TEd Documentation 1.0
19/39
3. Save BattlefieldSaves the battlefield to the maps directory. Simply type a file name into the box and hit
Save.
For Windows 7 and Windows Vista users by default your maps will be saved in the following
directory (where is the name of the current user logged on:
C:\Users\\AppData\Roaming\The Creative Assembly\Shogun2\maps
For Windows XP users the directory would be:
C:\Documents and Settings\\Application Data\The Creative
Assembly\Shogun2\maps
4. ExitExits TEd. Like when you create a New Battlefield, a message box reminds you to save before
you quit so you wont lose any work.
Edit Menu
1. Undo [CTRL + Z]Undo the last operation that was performed whether it was placing a building, deleting a
tree or raising terrain.
BUG: Undo operations are not always carried out 100% of the time.
2. Redo [CTRL + Y]Similar to Undo, but Redo will perform the last operation that was undone.
3. Copy [CTRL + C]Copy an object such as a tree or a building. An object needs to be selected in order for
Copy to become available.
4. Paste [CTRL + V]Paste an object after it has been copied in order to create a duplicate of that object which
will appear next to the object it was copied from.
5. Delete [DEL]Delete an object after it has been selected which will also remove it from the instance list.
7/30/2019 TEd Documentation 1.0
20/39
6. Save selection as brush [CTRL + B]This is used in conjunction with the Instance Brush object type. Select a number of objects
and save them as a brush so that group of objects can be painted and repeated. See the
section on Instance Brushes for a more detailed explanation.
7. Group Selection [CTRL + G]Select a number of objects and group them so they appear in the instance list as an
Instance Group. Instead ofmoving or relating objects individually you can simply group
them and any changes made to the group will affect all the objects within that group.
8. UnGroup Selection [CTRL + U]The opposite of creating a group ungroup your selection so those objects are now
individual and appear separately in the instance list.
9. Height Map BiasThis will raise or lower the terrain across the entire battlefield. This is especially useful for
creating maps with large amounts of water simply lower the height map to water level (-20
bias should be enough) to create a vast ocean and raise the terrain with the Height Paint
Channel to create islands.
10.Save Zones
Environment Menu
1. Load Environment SettingsLoad environment settings that have been previously saved from an .environment file. The
Windows Open File dialogue will appear, simply navigate to the directory where the file was
saved, select it and Open it.
2. Save Environment SettingsSave Environment settings to an .environment file which can then be reloaded. The
Windows Save File dialogue box will appear, simply navigate to the directory you want the
file to be saved to, enter a file name and click Save.
3. Reload Textures [CTRL + T]Reload all the textures loaded into TEd.
4. Reload Modules [CTRL + M]Reload all the modules loaded into TEd.
7/30/2019 TEd Documentation 1.0
21/39
Options Menu
1. Shadow Toggle [CTRL + S]This setting will toggle Shadows being visible to the user or not. Trees, buildings and other
objects cast shadows which are visible in the scene view.
BUG: Shadows move around when rotating / zooming / moving the camera
2. PreferencesOpens the Preferences window which can be used to change various settings for various
features in TEd.
BUG: The Preferences window from the Options file menu is not displayed correctly. The
instance list can be used instead to change any settings within TEd.
Scene Graph / Instance ListThe Scene Graph / Instance list is almost like TEd without the 3D scene view. Here are number of
different elements are listed that let you customise TEd with a great amount of detail.
Settingso Change settings for almost every aspect of how TEd, and everything in TEd works.
Camerao Change how the camera in TEd works.
Layerso A layer based instance list system that displays every object you have placed onto
the battlefield You are able to change settings for each individual object. Objects
are organised hierarchically.
Moduleso A module system that loads all different aspects of TEd into one system, and the
ability to change settings for each module.
Sceneo A scene list where you can change the aesthetics of how your battlefield looks.
7/30/2019 TEd Documentation 1.0
22/39
Property Panel
General
The general Property Panel area displays the properties of whichever object or Scene Graph element
you have selected so you can quickly change it.
There are multiple options available for anything that you can select, each of which is fairly self-
explanatory.
Camera Mode
Just beneath the general property panel area there are various other options (represented with
icons) that are used for quickly changing the most used properties in TEd.
The first of which is the Camera Mode which has 3 different settings;
Looko The default camera mode a full description on how this camera mode works is in
the View Navigation section.
Walko Navigate TEd as if you were a unit walking across the battlefield. The controls are
almost identical except you are close to the ground and cannot move up or down
the Y-axis.
Orbito Also similar to the Look camera mode but instead of rotating the camera on the
spot, you rotate the camera around a specific point on the battlefield which is useful
for getting a good rotational look around a certain object.
Grid Snap Options
Placement of objects can be made much easier by using the different grid snap options. If you need
to align your buildings or castle pieces in a certain way then these set of options are for you.
Grido A customisable grid can be toggled on or off by going to;
Settings > Drawing Settings > Show Grid
o When you have Snap to Grid turned on, any object that you place onto thebattlefield will snap to the points on the grid. You can change the size of the grid or
how many divisions it has too which gives a greater degree of control when placing
objects.
Angleo The Snap to Angle function is most useful when placing castle pieces for creating
your own siege map. By default the angle that objects snap to is set to 90
increments so that your objects will be perfectly aligned.
o Hold down the [ALT] key and select a building with the [LEFT MOUSE BUTTON]while under the Select Tab. While still holding the [ALT] key and the [LEFT MOUSEBUTTON], drag the mouse left or right to rotate the object in 90 increments.
7/30/2019 TEd Documentation 1.0
23/39
Edges Vertices Orient to Edges Playable Bounds
BUG: Snap to Edges, Vertices, Orient to Edges and Playable Bounds currently do not function.
Weather Options
TEd also has a wide variety of options for customizing the environment in which your battlefield is
placed in, some of which is the ability to change the weather. The following weather options are
available which are self-explanatory;
Dry Breezy Dry Gusty Dry Foggy Rain Gusty Rain Stormy Snow Gusty Snow Stormy
Remember, in order for your weather settings to be saved you will have to save them out separately
from the Environment file menu and selecting Save Environment Settings, then loading them back in
with Load Environment Settings (also from the Environment file menu)
Season Options
Change the different season that the appearance of your battlefield will appear as. The following
options are available;
Spring Summer Autumn Winter
Time of DayChange the time of day that your battlefield appears as.
Night Day
7/30/2019 TEd Documentation 1.0
24/39
Surface Mode
Change the surface mode of any object you have selected.
Landscape: Above Landscape: Centre Freeform Barycentric Edge Relative
Climate
Change the different climates available to how your battlefield will appear.
Japan_decidous Japan_evergreen Japan_lowland Japan_alpine Japan_mix Japan_default
Mask Mode
Change the mask mode in TEd.
Visible Active
7/30/2019 TEd Documentation 1.0
25/39
Keyboard Shortcuts
Shortcut Description
W Move camera forward
A Pan camera left
S Move camera backwards
D Pan camera right
Q Rotate camera left
E Rotate camera right
Z Increase camera altitude
X(when Select tabor Create tab isselected)
Decrease camera altitude
X(when Paint Tab isselected)
Toggle blend mode between additive and subtractive ifeither are selected
1 Move camera to a birds eye view position
2 Move camera to ground level
ESC Zoom 3D view this increases the size of the frame viewto remove the tree view, property panel and animationeditor. A second press removes the creation panel. A thirdpress returns all the removed windows.
Delete Delete currently selected object
7/30/2019 TEd Documentation 1.0
26/39
7/30/2019 TEd Documentation 1.0
27/39
Building Categories
Building Building Category
1meterblock incidental5meterblock incidental
5meterblock_wire incidental
archery_range key_building_archery_dojo
archery_range_v2 key_building_archery_dojo
bale_rice_pile incidental
bale_rice_pile_large incidental
barrel_half_wooden incidental
barrel_sake_stack incidental
barrel_sake_stack_large incidental
barrel_wooden incidental
barrel_wooden_large incidental
basket_empty_a incidental
basket_empty_a_large incidental
basket_empty_b incidental
basket_empty_b_large incidental
basket_fish_a incidental
basket_fish_a_large incidental
basket_tea incidental
basket_tea_large incidental
bench_a incidental
boat_ferry incidental
boat_fishing_small_a incidental
boat_fishing_small_b incidental
boat_fishing_small_c incidental
boat_rack house
bojutsu_parlour house
boxes_pile_a incidental
boxes_pile_a_large incidental
boxes_pile_b incidentalboxes_pile_b_large incidental
bridge_a_30metre bridge
bridge_a_50metre bridge
bridge_primer bridge
bridge_railway_01 incidental
bridge_repeater bridge
bridge_transition bridge
bucket incidental
bucket_large incidental
bucket_long_armed incidental
7/30/2019 TEd Documentation 1.0
28/39
bus ruins
camp_fire_large house
cart_a incidental
cart_b incidental
cart_c incidental
cart_with_logs incidental
castle_01 fort
castle_01_120men house
castle_01_90corner fort_wall
castle_01_90corner_star fort_wall
castle_01_90cornerin fort_wall
castle_01_anglewall_groundshort_01 fort_wall
castle_01_anglewall_groundshort_02 fort_wall
castle_01_anglewall_groundshort_03 fort_wall
castle_01_anglewall_groundshort_04 fort_wallcastle_01_bridge bridge
castle_01_bridgelake bridge
castle_01_e3flaghuge incidental
castle_01_e3flaglarge incidental
castle_01_e3flagsmall incidental
castle_01_endcap_left ruins
castle_01_endcap_right ruins
castle_01_gate_01 gate
castle_01_gate_02 gate
castle_01_gate_03 gate
castle_01_gate_04 gate
castle_01_keep_01 townhall
castle_01_keep_e3 townhall
castle_01_keep_frontendonly ruins
castle_01_steps ruins
castle_01_tower_01 fort_tower
castle_01_tower_02 fort_tower
castle_01_tower_03 fort_tower
castle_01_wall_10_01 fort_wallcastle_01_wall_20_01 fort_wall
castle_01_wall_20_01_star fort_wall
castle_01_wall_40_01 fort_wall
castle_01_wall_fill fort_wall
castle_02_90corner fort_wall
castle_02_90cornerin fort_wall
castle_02_anglewall_groundshort_01 fort_wall
castle_02_anglewall_groundshort_02 fort_wall
castle_02_anglewall_groundshort_03 fort_wall
castle_02_anglewall_groundshort_04 fort_wall
7/30/2019 TEd Documentation 1.0
29/39
castle_02_gate_01 gate
castle_02_gate_02 gate
castle_02_gate_04 gate
castle_02_keep_01 townhall
castle_02_tower_01 fort_tower
castle_02_tower_03 fort_tower
castle_02_wall_10_01 fort_wall
castle_02_wall_20_01 fort_wall
castle_02_wall_40_01 fort_wall
castle_02_wall_fill fort_wall
castle_03_90corner fort_wall
castle_03_90cornerin fort_wall
castle_03_anglewall_groundshort_01 fort_wall
castle_03_anglewall_groundshort_02 fort_wall
castle_03_anglewall_groundshort_03 fort_wallcastle_03_anglewall_groundshort_04 fort_wall
castle_03_gate_02 gate
castle_03_gate_04 gate
castle_03_tower_01 fort_tower
castle_03_wall_10_01 fort_wall
castle_03_wall_20_01 fort_wall
castle_03_wall_40_01 fort_wall
castlewood_01_90corner fort_wall
castlewood_01_keep townhall
castlewood_01_tower fort_tower
castlewood_01_wall_40_01 fort_wall
castlewood_01b_tower fort_tower
castlewood_02_90corner fort_wall
castlewood_02_wall_40_01 fort_wall
castlewood_02b_90corner fort_wall
castlewood_02b_wall_40_01 fort_wall
castlewood_signalling_beacon house
cinematic_bamboowall incidental
cinematic_cart_with_firecrackers housecinematic_wagon incidental
cinematics_artworkshop house
cinematics_audience_tent ruins
cinematics_blue_screen ruins
cinematics_camp_fire ruins
cinematics_church_a incidental
cinematics_dais ruins
cinematics_fishing_rod ruins
cinematics_floating_lantern ruins
cinematics_floating_platform incidental
7/30/2019 TEd Documentation 1.0
30/39
cinematics_kabuki_stage ruins
cinematics_lantern_paper_hanging_imperial ruins
cinematics_lavish_balcony ruins
cinematics_map_on_low_table ruins
cinematics_omikoshi ruins
cinematics_palace_emperor_int ruins
cinematics_palace_shogun_int ruins
cinematics_private_balcony ruins
cinematics_private_balcony_roof ruins
cinematics_private_chambers ruins
cinematics_private_chambers_roof ruins
cinematics_prop_bottle1 ruins
cinematics_prop_bottle2 ruins
cinematics_prop_bottle3 ruins
cinematics_prop_bottle4 ruinscinematics_prop_box1 ruins
cinematics_prop_box2 ruins
cinematics_prop_can ruins
cinematics_prop_candle ruins
cinematics_prop_pot ruins
cinematics_prop_sack_coffee ruins
cinematics_prop_sack_flour ruins
cinematics_railway_track ruins
cinematics_sake_cup house
cinematics_scales ruins
cinematics_staff ruins
cinematics_stone_floor_tile ruins
cinematics_throne_room house
cinematics_throne_room_roof house
cinematics_tokonoma_scroll_f ruins
cinematics_trader_premises_exterior ruins
cinematics_trader_premises_interior ruins
cinematics_train ruins
cinematics_urn ruinscinematics_wharf_90cornerex ruins
cinematics_wharf_90cornerin ruins
cinematics_wharf_cleat ruins
cinematics_wharf_outcrop ruins
cinematics_wharf_outcrop_end ruins
cinematics_wharf_outcrop_low ruins
cinematics_wharf_outcrop_wideend ruins
cinematics_wharf_road_90 ruins
cinematics_wharf_road_cornerend ruins
cinematics_wharf_road_cornerend_rev ruins
7/30/2019 TEd Documentation 1.0
31/39
cinematics_wharf_road_pavewide ruins
cinematics_wharf_road_straight ruins
cinematics_wharf_stairs_a ruins
cinematics_wharf_stairs_b ruins
cinematics_wharf_stairs_c ruins
cinematics_wharf_straight_a ruins
cinematics_wharf_tjunction ruins
cinematics_win_scene_buildings ruins
coastal_batteries_cinematics ruins
coastal_batteries_large coastal_battery
coastal_batteries_large_mp coastal_battery
coastal_batteries_medium coastal_battery
coastal_batteries_medium_mp coastal_battery
coastal_batteries_small coastal_battery
coastal_batteries_small_mp coastal_batterycoastal_battery_medium coastal_battery
compound_archery_range key_building_archery_dojo
compound_farmhouse_barn house
compound_farmhouse_main key_building_farmhouse
compound_farmhouse_teahouse house
compound_sake_den house
compound_shinto_shrine key_building_shrine
compound_sword_dojo key_building_sword_dojo
compound_test_building house
compound_workshop_main key_building_workshop
compound_workshop_workshop house
compoundwall_v2_wood_low_endcap house
compoundwall_v2_wood_low_straight_2m house
compoundwall_v2_wood_low_straight_6m house
compoundwall_wood_high_corner_internal house
compoundwall_wood_high_diag_corner_2m2m house
compoundwall_wood_high_diag_ext_straight_2m2m house
compoundwall_wood_high_diag_ext_straight_6m2m house
compoundwall_wood_high_diag_int_straight_2m2m housecompoundwall_wood_high_diag_int_straight_6m2m house
compoundwall_wood_high_endcap house
compoundwall_wood_high_noshoot_2m house
compoundwall_wood_high_noshoot_6m house
compoundwall_wood_high_noshoot_corner house
compoundwall_wood_high_noshoot_diag_corner_2m2m house
compoundwall_wood_high_noshoot_diag_ext_6m2m house
compoundwall_wood_high_noshoot_diag_ext_straight_2m2m house
compoundwall_wood_high_noshoot_diag_int_6m2m house
compoundwall_wood_high_noshoot_diag_int_straight_2m2m house
7/30/2019 TEd Documentation 1.0
32/39
compoundwall_wood_high_noshoot_endcap house
compoundwall_wood_high_platform_6m house
compoundwall_wood_high_straight_2m house
compoundwall_wood_high_straight_6m house
compoundwall_wood_low_corner vaultable_wall
compoundwall_wood_low_diag_corner_2m2m vaultable_wall
compoundwall_wood_low_diag_ext_6m2m vaultable_wall
compoundwall_wood_low_diag_ext_straight_2m2m vaultable_wall
compoundwall_wood_low_diag_int_6m2m vaultable_wall
compoundwall_wood_low_diag_int_straight_2m2m vaultable_wall
compoundwall_wood_low_endcap vaultable_wall
compoundwall_wood_low_straight_2m vaultable_wall
compoundwall_wood_low_straight_6m vaultable_wall
crate_tea_closed incidental
crate_tea_closed_large incidentalcrate_tea_empty incidental
crate_tea_empty_large incidental
crate_tea_lid_ajar incidental
crate_tea_lid_ajar_large incidental
crate_tea_open incidental
crate_tea_open_large incidental
crate_tea_pile_01 incidental
crate_tea_pile_02 incidental
crate_tea_pile_03 incidental
curtain_jinmaku ruins
daimyo_stool incidental
european_wooden_chair incidental
european_wooden_table incidental
european_wooden_table_documents incidental
flag_capturepoint fort
flag_sashimono_chosokabe ruins
flag_sashimono_chosokabe_torn ruins
flag_sashimono_date ruins
flag_sashimono_date_torn ruinsflag_sashimono_hojo ruins
flag_sashimono_hojo_torn ruins
flag_sashimono_mori ruins
flag_sashimono_mori_torn ruins
flag_sashimono_neutral ruins
flag_sashimono_neutral_torn ruins
flag_sashimono_oda ruins
flag_sashimono_oda_torn ruins
flag_sashimono_shimazu ruins
flag_sashimono_shimazu_torn ruins
7/30/2019 TEd Documentation 1.0
33/39
flag_sashimono_takeda incidental
flag_sashimono_takeda_torn ruins
flag_sashimono_tokugawa ruins
flag_sashimono_tokugawa_torn ruins
flag_sashimono_uesugi ruins
flag_sashimono_uesugi_torn ruins
fmv_castle_01_anglewall_groundshort_01 incidental
fmv_castle_01_anglewall_groundshort_02 incidental
fmv_castle_01_anglewall_groundshort_03 incidental
fmv_castle_01_anglewall_groundshort_04 incidental
fmv_castle_01_gate_01 incidental
fmv_castle_01_gate_02 incidental
fmv_castle_01_gate_03 incidental
fmv_castle_01_gate_04 incidental
fmv_castle_01_keep_01 incidentalfmv_castle_01_steps incidental
fmv_castle_01_tower_01 incidental
fmv_castle_01_tower_02 incidental
fmv_castle_01_tower_03 incidental
fmv_castle_01_wall_10 incidental
fmv_castle_01_wall_20 incidental
fmv_castle_01_wall_40 incidental
fmv_shinto_shrine incidental
hay_bale_large incidental
hay_bale_small incidental
hay_drying_rack_large house
hay_drying_rack_small house
key_buildingtest key_building_sword_dojo
lantern_stone_a incidental
lantern_stone_a_large incidental
lantern_stone_a_noglow incidental
lantern_string_01 house
lantern_string_02 house
lantern_string_02_multicoloured houselantern_wooden_box incidental
lantern_wooden_box_large incidental
lantern_wooden_box_noglow incidental
lantern_wooden_short incidental
lantern_wooden_short_large incidental
lantern_wooden_short_noglow incidental
lantern_wooden_tall incidental
lantern_wooden_tall_large incidental
lantern_wooden_tall_noglow incidental
lantern_wooden_tallhanging incidental
7/30/2019 TEd Documentation 1.0
34/39
lantern_wooden_tallhanging_large incidental
lantern_wooden_tallhanging_noglow incidental
market_stall_fish_market ruins
market_stall_fruit_market ruins
market_stall_lanterns_market ruins
market_stall_pottery_market ruins
memorial_a incidental
memorial_a_large incidental
memorial_b incidental
memorial_b_large incidental
memorial_c incidental
memorial_d incidental
memorial_e house
memorial_stone_buddhist incidental
memorial_stone_buddhist_large incidentalmountain_village_large_house_01 ruins
mountain_village_large_house_02 ruins
mountain_village_large_house_03 ruins
mountain_village_large_house_04 ruins
mountain_village_small_house_01 ruins
mountain_village_small_house_02 ruins
mountain_village_small_house_03 ruins
net_fishing_conical house
net_fishing_conical_large house
oodateshield_prop house
outfieldfactory incidental
outfieldtown_buildings incidental
packed_cannon incidental
packed_cannon_large incidental
paddy_field_a incidental
paddy_field_b incidental
plains_village_buildings_large_house_01 ruins
plains_village_buildings_large_house_02 ruins
plains_village_buildings_large_house_03 ruinsplains_village_buildings_large_house_04 ruins
plains_village_buildings_small_house_01 ruins
plains_village_buildings_small_house_02 ruins
plains_village_buildings_small_house_03 ruins
plains_village_buildings_small_house_04 ruins
pontoon_01 house
pontoon_01_extender house
pontoon_02_high house
pontoon_02_high_extender house
pontoon_03_flat house
7/30/2019 TEd Documentation 1.0
35/39
pontoon_03_flat_extender house
pontoon_04_dock_a house
pontoon_04_dock_b house
pontoon_04_dock_c house
pontoon_wrecked_a incidental
pontoon_wrecked_b incidental
pontoon_wrecked_c incidental
rack_fish_drying incidental
rack_fish_hanging incidental
railway_tunnel_01 house
rock_a house
rock_b house
rock_c house
rock_d house
rock_e houserock_f house
rock_g house
sake_den house
samurai_death01 incidental
samurai_death02 incidental
samurai_death03 incidental
samurai_death04 incidental
samurai_death05 incidental
samurai_walled_farmhouse key_building_farmhouse
samurai_walled_farmhouse_unoccupied key_building_farmhouse
shack_hay_large house
shack_hay_small house
shinto_shrine key_building_shrine
shinto_shrine_unoccupied key_building_shrine
ship_heavy_bune house
shrine_covered_small incidental
shrine_raised house
sign_covered incidental
sign_vertical incidentalsign_wooden incidental
statue_buddha_b house
statue_buddha_b_large key_building_shrine
statue_chosokabe house
statue_date house
statue_hatori house
statue_hojo house
statue_mori house
statue_oda house
statue_shimazu house
7/30/2019 TEd Documentation 1.0
36/39
statue_takeda house
statue_tokugawa house
statue_uesugi house
stronghold_pagoda_building house
stronghold_temple_building house
stronghold_temple2_building house
strongholdbuilding_1 house
strongholdbuilding_2 house
strongholdbuilding_3 house
sword_dojo key_building_sword_dojo
sword_dojo_nobalcony house
sword_dojo_unoccupied key_building_sword_dojo
table_maps house
table_no_maps house
target_dummy incidentaltelegraph_pole_01 incidental
telegraph_pole_02 incidental
telegraph_pole_03_line incidental
telegraph_pole_03_lineend incidental
temple_gate house
tent_large house
tent_medium house
tent_small house
test_bojutsu house
test_lods house
thatch_buildings_test_01 house
the_black_ship house
tool_pile_a incidental
tool_pile_a_large incidental
tool_pile_b incidental
tool_pile_b_large incidental
torii_large house
torii_medium house
torii_medium_v2 housetorii_small house
tower_kowagoe incidental
tower_stone_01 fort_tower
tower_stone_01_level_01 fort_tower
tower_stone_01_level_02 fort_tower
tower_stone_01_level_03 fort_tower
tower_stone_01_level_04 fort_tower
tower_stone_01_level_05 fort_tower
tower_stone_02 fort_tower
tower_stone_02_level_01 fort_tower
7/30/2019 TEd Documentation 1.0
37/39
tower_stone_02_level_02 fort_tower
tower_stone_02_level_03 fort_tower
tower_stone_02_level_04 fort_tower
tower_stone_02_level_05 fort_tower
tower_stone_03 fort_tower
tower_stone_03_level_01 fort_tower
tower_stone_03_level_02 fort_tower
tower_stone_03_level_03 fort_tower
tower_stone_03_level_04 fort_tower
tower_stone_03_level_05 fort_tower
tower_stone_04 fort_tower
tower_stone_05 fort_tower
tower_wood_01 fort_tower
tower_wood_01_level_01 fort_tower
tower_wood_01_level_02 fort_towertower_wood_01_level_03 fort_tower
tower_wood_01_level_04 fort_tower
tower_wood_01_level_05 fort_tower
tower_wood_02 fort_tower
tower_wood_03 fort_tower
tower_wood_03_level_01 fort_tower
tower_wood_03_level_02 fort_tower
tower_wood_03_level_03 fort_tower
tower_wood_03_level_04 fort_tower
tower_wood_03_level_05 fort_tower
tower_wood_04 fort_tower
tower_wood_05 fort_tower
town_building_b house
town_building_c house
town_building_e house
town_building_g house
track_10m incidental
track_256m incidental
track_256m_bend incidentaltrack_tileend incidental
wagon_withcargo incidental
wagon_withoutcargo incidental
wood_pile_a house
wood_pile_a_large house
wood_pile_b house
wood_pile_b_large house
wood_stack house
wood_stack_large house
wooden_cannon_cinematics incidental
7/30/2019 TEd Documentation 1.0
38/39
workshop key_building_workshop
zen_garden_floor_stone_01 floor_tile
zen_garden_floor_stone_02 floor_tile
zen_garden_gate incidental
zen_garden_grass_01 floor_tile
zen_garden_grass_02 floor_tile
zen_garden_grass_gravel_01 floor_tile
zen_garden_grass_gravel_02 floor_tile
zen_garden_grass_gravel_03 floor_tile
zen_garden_grass_gravel_04 floor_tile
zen_garden_gravel_01 floor_tile
zen_garden_gravel_02 floor_tile
zen_garden_rocks_01 incidental
zen_garden_rocks_02 incidental
zen_garden_rocks_03 incidentalzen_garden_rocks_04 incidental
zen_garden_rocks_moss_01 incidental
zen_garden_rocks_moss_02 incidental
zen_garden_rocks_moss_03 incidental
zen_garden_rocks_moss_04 incidental
zen_garden_tile_stone_01 floor_tile
zen_garden_tile_stone_02 floor_tile
zen_garden_tile_stone_03 floor_tile
zen_garden_tile_stone_04 floor_tile
zen_garden_wall_10m incidental
zen_garden_wall_2m incidental
zen_garden_wall_6m incidental
zen_garden_wall_cornerin incidental
zen_garden_wall_cornerout incidental
zen_garden_woodboard incidental
zen_garden_woodboard_lamp incidental
7/30/2019 TEd Documentation 1.0
39/39
Bugs / Known Issues
The Preferences window from the Options file menu is not displayed correctly The preview icon in the select_trees window sometimes displays all trees blended together Cloudset_4 has a missing or corrupt texture The longer the list in the Undo History tab, the longer it takes for an undo action to complete The Undo History tab does no work correctly 100% of the time Copy & Pasting an object after undoing and redoing causes the placement of the object to
be incorrect Slider options for building position are too large Deployment Zones are not remembered after saving and reloading The Alliance ID cannot be changed for a deployment zone A crash occurs when loading a particle systems file that has previously been saved A crash occurs when copy and pasting an EF Line Snap to angle does not function correctly User is able to create a new layer Shadows move around when rotating / zooming / moving the camera