schneider-electric.com.au

3 APRIL 2019

Technical Training

INNOVATION HUB TOUR 2019 - SCHEDULE

Wednesday, April 3

Time

Room 1 - How to maximise profitability in Hybrid IT Room 2 - Critical Cooling and Power Room 3 - Electrical Distribution and Data Communication

Speaker Session Name Synopsis Speaker Session Name Synopsis Speaker Session Name Synopsis

8:30am -

9:00amRegistrations Open

9:00am -

9:30am

Chris Lacherdis

From Buzzwords to Reality:The Incoming Edge Computing Tide

What are the market indicators to illustrate Edge Computing should be our focus and what is Schneider Electric’s investment and commitment to support Edge compute growth in channel.

Salo Peter Australian Compliance and Standards An overview of changes

Learn changes in Australian compliance and standards related to critical power and cooling

Xavier Lifran

Thomas Robin

Commercial building fit off: regulation, application and innovation

Office spaces, schools, airports, shopping malls, our buildings are changing and requirements with them. Wiring Devices are often the only visible part of full building infrastructure for end-users and visitors. While regulations make us safe, discover how Clipsal by Schneider Electric innovates!

9:30am -

10:00am

ASI - Nathan Lowe

Edge Computing for Education

Discover the relevance of Edge Computing within Education and how it underpins their business and applications.

Maurizio Frizziero

Innovative Cooling applications

Discover the latest in cooling applications Boris Fuchs Design best practices for electrical distribution systems

#1 Fault level downstream of current limiting devices: why current limiting breakers or fuses do NOT reduce fault levels, and why it is dangerous to assume they do.#2 Earth fault protection on main incomers: when more protection is too much protection, and how it can compromise compliance to AS/NZS3000

10:00am -

10:30amMorning Tea

10:30am -

11:00am

Bhagwati Revenue drivers for Edge

How can you leverage Edge to drive incremental revenue for your business. What happens if you are not equipped to take advantage of the Edge opportunity?

Raed Odeh Analysis of Power Quality disturbances in critical buildings.

This presentation will provide a brief description of trends in rectifier technology including pros and cons as well as case studies on power quality disturbances with emphasis on application where mitigation techniques can be used.

Sagar Modi Discover the benefits of Busway systems for modular and efficient electrical distribution

The need of today’s electrical distribution system is safety, reliability, compactness, ease of installation, upgradeability and simplicity. Discover how Schneider busway offers a comprehensive and consistent lighting and power distribution solution to all your needs resulting in an optimised electrical installation with improved performance.

11:30am -

12:00pm

Karthik Iyer Cooling for Edge solutions

Are you thinking about cooling when providing high density Edge solutions that support complex applications? Find out why

Lukasz Staciwo

Critical Facility Software DCIM

“Do I really need DCIM? Can I not just continue and use my spreadsheets…” At Schneider we believe running your IT infrastructure without DCIM is like driving a car with most of the windshield covered…disaster is never too far away. Join us to see the latest in DCIM technologies and learn the true value it provides.

Quentin Leddet

Connected Electrical Distribution Switchgear

Discover how technology can help give a voice to your electrical switchboards. From simpler data acquisition and commissioning to asset tracking and maintenance services

12:00pm -

12:30pm

Andrew Sylvester

EcoStruxure IT at the Edge

Experience Schneider Electric’s multi platform cloud based monitoring and management solution for infrastructure at the Edge.

Jason Deane Designing for critical power

Application based solutions + offer --> cover Easy UPS vs 3PH

Murray Teale (VTI Services)

Best practices and new standards in structured cabling

Discover best practices in structured cabling

12:30pm -

1:00pm

Claus Lavdal Ecostruxure Asset Advisor - Bringing digital services to the edge

EcoStruxureAsset Advisor is a cloud-based remote monitoring service that proactively minimises downtime and reduced break-fix resolution time through smart alarming, remote troubleshooting and visibility into your equipment lifecycle. Now you can manage your customers’ entire fleet of critical power and cooling equipment from your mobile device with a whole bureau supporting you 24/7. Join this session to find out how EcoStruxureAsset Advisor can provide you with better customer knowledge and loyalty to your business.

Lukasz Staciwo

Shifting from Reactive to Condition-Based Maintenance

Wouldn’t life be better if you knew when something might go wrong instead of waiting? Consistent maintenance of assets can aid in avoiding up to 77% of breakdowns. Find out more about the benefits and how to predict failure instead of reacting to it.

1.00pm -

1.30pmLUNCH

INNOVATION HUB TOUR 2019 - SCHEDULE

Wednesday, April 3

Time Room 1 - How to maximise profitability in Hybrid IT Room 2 - Critical Cooling and Power Room 3 - Electrical Distribution and Data Communication

8:30am - 9:00am Registrations Open

9:00am - 9:30am From Buzzwords to Reality:The Incoming Edge Computing Tide

Chris Lacherdis

What are the market indicators to illustrate Edge Computing should be our focus and what is Schneider Electric’s investment and commitment to support Edge compute growth in channel.

Australian Compliance and Standards

Salo Peter

Learn Australian compliance and standards related to critical power and cooling

Commercial building fit off: regulation, application and innovation

Xavier Lifran & Thomas Robin

Office spaces, schools, airports, shopping malls, our buildings are changing and requirements with them. Wiring Devices are often the only visible part of full building infrastructure for end-users and visitors. While regulations make us safe, discover how Clipsal by Schneider Electric innovates!

9:30am - 10:00am Edge Computing for Education

ASI - Nathan Lowe

Discover the relevance of Edge Computing within Education and how it underpins their business and applications.

Innovative Cooling applications

Pankaj Phatak

Discover the latest in cooling applications

Design best practices for electrical distribution systems

Boris Fuchs

#1 Fault level downstream of current limiting devices: why current limiting breakers or fuses do NOT reduce fault levels, and why it is dangerous to assume they do.#2 Earth fault protection on main incomers: when more protection is too much protection, and how it can compromise compliance to AS/NZS3000

10:00am - 10:30am Morning Tea

10:30am - 11:00am Revenue drivers for Edge

Bhagwati

How can you leverage Edge to drive incremental revenue for your business. What happens if you are not equipped to take advantage of the Edge opportunity?

Analysis of Power Quality disturbances in critical buildings.

Raed Odeh

This presentation will provide a brief description of trends in rectifier technology including pros and cons as well as case studies on power quality disturbances with emphasis on application where mitigation techniques can be used.

Discover the benefits of Busway systems for modular and efficient electrical distribution

Sagar Modi

The need of today’s electrical distribution system is safety, reliability, compactness, ease of installation, upgradeability and simplicity. Discover how Schneider busway offers a comprehensive and consistent lighting and power distribution solution to all your needs resulting in an optimised electrical installation with improved performance.

11:30am - 12:00pm Cooling for Edge solutions

Karthik Iyer

Are you thinking about cooling when providing high density Edge solutions that support complex applications? Find out why

Critical Facility Software DCIM

Lukasz Staciwo

“Do I really need DCIM? Can I not just continue and use my spreadsheets…” At Schneider we believe running your IT infrastructure without DCIM is like driving a car with most of the windshield covered…disaster is never too far away. Join us to see the latest in DCIM technologies and learn the true value it provides.

Connected Electrical Distribution Switchgear

Quentin Leddet

Discover how technology can help give a voice to your electrical switchboards. From simpler data acquisition and commissioning to asset tracking and maintenance services

12:00pm - 12:30pm EcoStruxure IT at the Edge

Andrew Sylvester

Experience Schneider Electric’s multi platform cloud based monitoring and management solution for infrastructure at the Edge.

Designing for critical power

Jason Deane

Application based solutions + offer --> cover Easy UPS vs 3PH

Best practices and new standards in structured cabling

Murray Teale (VTI Services)

Discover best practices in structured cabling

12:30pm - 1:00pm Ecostruxure Asset Advisor - Bringing digital services to the edge

Claus Lavdal

EcoStruxureAsset Advisor is a cloud-based remote monitoring service that proactively minimises downtime and reduced break-fix resolution time through smart alarming, remote troubleshooting and visibility into your equipment lifecycle. Now you can manage your customers’ entire fleet of critical power and cooling equipment from your mobile device with a whole bureau supporting you 24/7. Join this session to find out how EcoStruxureAsset Advisor can provide you with better customer knowledge and loyalty to your business.

Shifting from Reactive to Condition-Based Maintenance

Lukasz Staciwo

Wouldn’t life be better if you knew when something might go wrong instead of waiting? Consistent maintenance of assets can aid in avoiding up to 77% of breakdowns. Find out more about the benefits and how to predict failure instead of reacting to it.

1.00pm - 1.30pm LUNCH