Taking advantage of the industry’s leadingdigital prototyping solutionTeamcenter Visualization Mockup enables designteams to create high-level digital prototypescomprised of thousands of parts and components.Digital prototyping is an extremely cost effectivealternative to physical prototyping that letsproduct makers realize enormous cost savings,productivity improvements and reductions incycle times.

By leveraging Teamcenter Visualization Mockup, design teams can quickly build a high-level digitalprototype, distribute the universally viewable prototype to widely dispersed team members, analyzeits interrelated components, simulate the product’s operations, enable team members to annotatetheir concerns and rapidly incorporate alternative design concepts.

Visualization Mockup’s analysis and simulation capabilities make physical prototyping a remnant of thepast. The solution’s analysis capabilities enable you to check interferences, evaluate separationrequirements, perform human factor studies, conduct parts in motion studies and determine whethersufficient accessibility is provided to facilitate maintenance procedures. Taken together, thesecapabilities allow you to detect and fix design errors long before you manufacture any parts.

The solution’s digital prototyping capabilities are part of Teamcenter Visualization, the world’s market-leading suite of product visualization solutions. With more market share than the next threecompetitive solutions combined,Teamcenter Visualization’s core technology JT has become theindustry standard for visualization, collaboration and interoperability.

Extended enterprise collaborationTeamcenter Visualization is the world’s most widely used visualization solution with more than900,000 users on active maintenance. Based on this leading market presence, the vendors and alliedpartners who participate in your supply chain are more likely to be using Teamcenter Visualization

TeamcenterVisualization MockupUsing real-time digital mockup tools to detect and solve design issues early in your product lifecycle

fact sheet

BenefitsReduces or eliminates physicalprototypes using production-provendigital mockup capabilities tovisualize and analyze lightweight andprecise virtual prototypes

Enables you to find and resolveform/fit/function design issues earlyin the design process with sophisti-cated spatial analysis tools such asclearance and interference analysis

Provides superior performance andrich-data support by leveraging openby design technology and standardJT™ format

Features•All TeamcenterVisualization Base,Standard, and Professional capabil-ities (presented in their entirety intheir respective fact sheets)

•Motion playback that enables youto detect interferences dynamically

•Ability to visualize and navigatemulti-CAD assemblies in JT formatfrom major 3D CAD systems,including NX® software, NX I-deas®software, Solid Edge® software,AutoCAD, Catia, CADDS,Inventor, Pro/Engineer andSolidWorks

•Neutral-file support, includingability to acceptVRML and STL.STEP, IGES, and DXF aresupported with associated optionalJT translators

SummaryTeamcenter® Visualization Mockup software is the industry’s most powerful real-time digital prototyping solution. By enabling your designteams to leverage advanced multi-CAD 3D visualization, large-scale product assembly analysis and universal collaboration capabilities in asingle solution,Visualization Mockup dramatically reduces – and in some cases entirely eliminates – expensive physical prototypes. Thesolution also plays a crucial role in improving your total quality program and facilitating your time-to-market initiatives by enabling you toidentify and resolve issues before they ever become issues in the first place.

Teamcenter

www.siemens.com/plmSiemens PLM Software

than any other solution on the market today. As a result, you and your design partners and suppliers canreadily exchange product data and collaborate in workflow-driven design and manufacturing processes.

Visualization Mockup enables you to work in a true multi-CAD digital prototyping environment. Withtranslators for all of the major CAD systems, the solution lets you create high-level assembly modelscomprised of parts and components drawn under various CAD systems globally dispersed across yourentire enterprise.

BecauseVisualization Mockup leverages the lightweight JT visualization format, you can quickly load,navigate through and analyze extremely complex assemblies. This level of superior performance ismatched by the solution’s ability to carry NURBS data within the JT models to facilitate precisemeasurement and analysis. The solution’s JT modeling capabilities also support manufacturinginformation (e.g., dimensions, tolerances and 3D notes) and attribute data to provide additional value toyour visualization sessions.

With tight integrations to the Teamcenter digital enterprise backbone,Visualization Mockup enables youto view data stored and managed by the world’s leading PLM portfolio. This integration is especiallyappropriate for companies that want to manage product data across the entire product lifecycle.Visualization Mockup leverages a strong data access toolkit to support both multi-CAD and multi-PLM integrations.

Scalable solution that grows with yourenterpriseThe following Teamcenter Visualization service levelsenable you to scale and extend the scope of yourvisualization solution to match the physical andfunctional growth of your enterprise.

Teamcenter Visualization Base – a powerfulvisualization solution that provides 2D and 3Dvisualization functionality, extensive 2D markup toolsand 2D investigation tools, including measurementand comparison capabilities. Includes basic 3Dviewing plus ability to visualize product structure.

Teamcenter Visualization Standard – an enterprise2D/3D view and markup solution that provides advanced 3D visualization functionality, powerful 3Dmarkup tools, 3D measurement and access to advanced product data including product manufacturinginformation (PMI).

Teamcenter Visualization Professional – a full-function design review tool with 3D investigation tools,including cross-section, 3D comparison and user-defined coordinate system capabilities that allow usersto perform analysis on multi-CAD assemblies – collaboratively – without using a CAD system.

Teamcenter Visualization Mockup – a sophisticated digital mockup solution used to assemble a completedigital prototype, perform advanced analysis – including static and dynamic clearance analysis on thewhole product – and detect issues early. Optional add-ons include, Clearance Database, Publish, Jack(ergonomics),VSA (tolerance analysis), Quality,Animation Creation and Path Planning.

iSeries – an easy to deploy and maintain web browser-based implementation of the TeamcenterVisualization Base, Standard and Professional service levels.

fact sheet Teamcenter

Features continued•Extensive static and dynamicclearance analysis tools forevaluating designs for interferences,checking interfaces and evaluatingseparation requirements

•Advanced filtering capabilities thatenable you to search on partattributes and properties tocontrol geometry displays

•Volume clipping either inside oroutside of a cuboid

•Extensive geometry editing toolswhich among other things, allowre-tessellation, decimation andcreation of shrink-wrap volumes

•Ability to capture part motion foroutput to appropriate movieformats and sizes

•Ability to view multimediadocuments created underVisualization Mockup’s publishoption

•Windows, UNIX and Linux(SUSE) support

Optional add-ons•Animation creation

•Path planning

•Visualization Analysis

•Visualization Publish

•Adams import motion

•Modeler optimizer

•VSA simulation

•ClearanceDB server

•Quality producer

•Vis Jack

•Concept Desktop and Showroom

© 2008 Siemens Product Lifecycle Management Software Inc. All rights reserved. Siemens and the Siemens logo are registered trademarks of Siemens AG.Teamcenter, NX, Solid Edge,Tecnomatix, Parasolid, Femap, I-deas, JT, Velocity Series and Geolus are trademarks or registered trademarks of Siemens ProductLifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. All other logos, trademarks, registered trademarks or servicemarks used herein are the property of their respective holders. 2/08

ContactSiemens PLM SoftwareAmericas 800 498 5351Europe 44 (0) 1276 702000Asia-Pacific 852 2230 3333www.siemens.com/plm