Upload
jaga-nath
View
220
Download
0
Embed Size (px)
Citation preview
8/12/2019 TDS - Masterpren TPE
1/2
M A ST ER P R EN
T P ESynthetic membrane of TPO
Description
M AS T ER P R EN T P E synthetic liner of T P O modified
polyolefin, in two-colour version (sand grey/black),
obtained by co-extrusion, which allows it to be
produced in a single layer a liner with different
physical-chemical properties on the two sides. It
has a polyester m esh reinforcement. T he upper
sand grey layer, which is exposed, is characterised
by an extremely high resistance to weathering and
ultraviolet rays, whereas the lower black layer is
resistant to puncturing
Typical applications
M AS T ER P R EN TP E can be applied in the following
circumstances:
Exposed roofing laid loose Exposed roofing mechanically fixed
Exposed roofing fully bonded (requiring a fleece
backing)
Landscaped areas and roof gardens
M ay be used in underground structures and
potable water structures
Advantages
It has superior mechanical characteristics and
has an extremely high resistance to weathering
and ultra violet rays
H igh mechanical properties and resistance to
puncturing
R ot-proof
R esistance to root penetration
If double welded it allows pressure testing of
oints
C an be bonded with the M asterpren TP O
Adhesive
G ood resistance to hydrocarbons and bacterial
attack
Long life expectancy
Packaging and oll sizes
M A S T ER P R E N T P E is supplied in various
thicknesses and widths of 2.10 m eters.
T hickness
(mm)
1.2 1.5 1.8 2.0 2.5
Width (m) 2.10 2.10 2.10 2.10 2.10
Length (m) 25 20 20 20 20
C olour S and grey / B lack
Fire-resistant version is available on request (class B2
according to DIN 4102/1) with EP/P R -FR designation
Application procedure
U sually applied by a S pecialist Applicator. P lease
contact B A SF C onstruction C hemicals for specific
application assistance.
WatertightSystems &Engineered Solutions
B AS F C onstruction C hemicals provides systems
and engineered solutions, to suit the structure, at
the design and construction stages, to ensure
water tightness. Various products and elements
which form an integral part of a system are
manufactured and approved by BAS F. The
following ranges of products are available;
M asterpren range P reformed membranes
M asterflex range - Active and passive joint
treatment
M asterseal range - Liquid applied membranes
and protective coatings
M asterflow range - H igh performance grouts
Emaco and C oncresive ranges - Repair
materials
8/12/2019 TDS - Masterpren TPE
2/2