T8 Evolution LED Tube Series

Instant On/ Instant Off

No Restart Delay

Ultra-Energy Effi cient

Eco Friendly

Durable Construction

Zero UV Emissions

Ultra Long Life

Zero Maintenance

Replaces Flourescent Tube Bulbs

T8 Evolution LED Tube Bulb

Light Source:

Optional Power Range:

CRI (Ra):

Working Lifetime:

Base Type:

Warranty:

Item Type:

Lumens/Watt:

Color Temp (cct):

Lamp Body Material:

Input Voltage:

Working Temperature:

Certifi cations Available:

Length:

LED Bulb

9w - 40w

>75

Greater than 50,000hrs

T8

3yrs

T8 LED Tube Bulb

90-100

2200-8000k

Aluminum Alloy

85-277v

-4°F to 104°F

CE, EMC, ETL, LVD, UL

2ft, 3ft, 4ft, 5ft, 8ft

Advantage

• High effi ciency: LED T8 tube lights can reduce your lighting energy usage by 50% or more!

• Long life: light-emitting semiconductor chip, no fi lament, no glass bulbs, no vibration, less breakable, life greater than 50,000 hours (incandescent life of only 800 hours.)

• Better for the planet than fl uorescent bulbs: no harmful chemicals such as mercury or lead (ordinary fl uorescent bulbs contain mercury).

• High Light effi ciency: 90% of the elec-trical energy converted into visible light (incandescent electric energy conver-sion 80% for the heat, only 20% of the energy into light energy)

T8 Evolution LED Tube Bulb Series715-362-4556

Part Specifi cations

Physical Properties Electrical Properties * Additional LED Options **

Replaceable Driver

00 - Non-Replaceable

01 - 3 Year Replaceable

Wiring Options

01 - Single End

02 - Double End

LED Cover

01 - Clear

02 - Striped

03 - Frosted

Ballast Compatible & Dimming

00 - Non Ballast Compatible Non Dimmable

02 - Non Ballast Compatible Dimmable

03 - Ballast Compatible Non Dimmable

04 - Ballast Compatible Dimmable

Driver Input Range

01 - 90-265 AC 50-70Hz

02 - 110-277 AC 50-70Hz

03 - 277 Only

Kelvin Color

A1 - 3000k

A2 - 3500k

A3 - 4000k

A4 - 4500k

A5 - 5000k

A6 - 5500k

A7 - 6000k

Beam Angle

01 - 180 Degree

02 - 120 Degree

03 - 270 Degree

Bulb Wattage

40 - 8ft 40W

32 - 8ft 32W

25 - 4ft 25W

18 - 4ft 18W

15 - 4ft 15W

12 - 3ft 12W

9 - 2ft 9W

* Cost of bulbs can change signifi -cantly when requesting dimmable or electronic ballast compatible bulbs.

**For greater savings, remove exist-ing ballast from retrofi ted fi xtures.

T8 Evolution LED Tube Bulb Series715-362-4556

Overview

The Lumedio T8 LED tube series is a simple way to make your current space more sustainable. These energy saving solutions fi t into existing linear fi xtures and provide comparable light levels to current linear fl uorescent systems.

LED technology is a smart decision because it offers both 100% light output in cold temperatures and no mercury, making the Lumedio LED T8 solutions ideal for specifi c applications such as offi ce buildings, warehouses, parking garages, universities, and other locations striving to reduce their carbon footprint, without increasing their cost of operation or sacrifi cing on light quality or light illumination levels.

Length Lumens Power Color Input Voltage Socket

2 foot (24”) 600 lm 9 w2700- 3500K (Warm White)

4000-5000K(Pure White)

5500-6500K(Cool White)

AC85-277V G13/Standard

4 foot (48”) 1200 lm 16 w

5 foot (60”) 2500 lm 25 w

8 foot (96”) 3900 lm 40 w

3 foot (36”) 900 lm 12 w

4 foot (48”) 1200 lm 18 w

8 foot (96”) 3200 lm 32 w

T8 Evolution LED Tube Series

T8 Evolution LED Tube Bulb Series715-362-4556

CRI

83

83

83

83

83

83

83

Color Temperature Chart

Color temperature is a description of the warmth or coolness of a light source. When a piece of metal is heated, the color of light it emits will change. This color begins as red in appearance and graduates to orange, yellow, white, and then blue-white to deeper colors of blue. The temperature of this metal is a physical measure in degrees Kelvin or abso-lute temperature. While lamps other than incandescent do not exactly mimic the output of this piece of metal, we utilize the correlated color temperature (or Kelvins) to describe the appearance of that light source as it relates to the appearance of the piece of metal (spe-cifi cally a black body radiator).

By convention, yellow-red colors (like the fl ames of a fi re) are considered warm, and blue-green colors (like light from an overcast sky) are considered cool. Higher Kelvin temperatures (4000–6000 K) are what we consider cool and lower color temperatures (2700–3500 K) are considered warm. Cool light is preferred for visual tasks because it produces higher contrast than warm light. Warm light is preferred for living spaces be-

cause it is more fl atter-ing to skin tones and clothing. A color tem-perature of 2700–3600 K is generally recom-mended for most resi-dential indoor general and tasks. 4000-4500K is recommended for offi ce enviroments, and 5000K and higher is good for technical and art design work. Color Temperature is not an indicator of lamp heat.

7,000K

Basic LEDReference Example

Kelvin ColorTemperature Scale

OutdoorSource

10,000K

Snow, Water, Blue Sky

Average Day LightCentral Latitudes

Early Morning, Late Afternoonand Evening Sunlight

Typical Incandescent light Bulbs (2,700K)

Average Day LightNorthern Hemisphere

Noon Sunlight

Super Daylight (6,400K)

Daylight (5,000K)

Cool White (4,200K)

Warm White (2,700K)

9,000K

8,000K

7,000K

6,000K

5,000K

4,000K

2,000K

1,000K

5,700K

4,000K

3,500K

3,000K

2,700K

3,000K

T8 Evolution LED Tube Bulb Series715-362-4556

CRI ChartCRI, or Color Rendering Index, is a measurement of a light source’s accuracy in rendering different colors when com-pared to a reference light source with the same correlated color temperature. It generally ranges from -41 for a source like a low-pressure sodium vapor lamp, which is monochro-matic, to 100, for a source like an incandescent light bulb, which emits essentially blackbody radiation.

The higher the CRI, the better the visual perception of colors. CRI is related to color temperature, in that the CRI measure-ments for a pair of light sources can only be compared if they have the same color temperature.

The highest attainable CRI is 100. Lamps with CRIs above 70 are typically used in offi ce and living environments. A stan-dard “cool white” fl uorescent lamp will have a CRI near 62.

Source of Light CRI Watt

Low Pressure Sodium 21 CRI 250 w

Metal Halide 60 CRI 455 w

LED Light 83 CRI 15 w

High Pressure Sodium 22 CRI 365 w

T8 Flourescent 62 CRI 36 w

CRI Comparison Chart

Your Current Lighting Electrical Costs Per Year: $3,242.30Your Lighting Electrical Costs Per Year With Lumedio

Lamps:$1,823.80

Your Current Ballast Replacement Costs Per Year: $65.00 Ballast Replacement with Lumedio Lamps $0.00

Your Current Lamp Replacement Costs Per Year: $328.42 Lamp Replacement with Lumedio Lamps $0.00

Your Total Current Lighting Costs: $3,635.73 Your Lighting Costs after Installing Lumedio Lamps: $1,823.80

$1,811.93

$11,583.11

$2,800.00

$2,800.00

1.55 years

65.00%

10,912

100 bulbs, 24 hours per day at $.13 per kw

Fluorescent T8 4ft 32w Lumedio LED replacement T8 4ft 18w

VS

Simple Payback:

Annualized Rate of Return:

Projected Annual Kilowatt Hours Saved:

Total Annual Savings with Lumedio Evolution LED T8 Series

Total Estimated Savings Over the Life of the Lamp:

Estimated cost to replace your lamps with Lumedio LED lamps:

Estimated net cost to replace your lamps with Lumedio LED lamps:

Lower Cost and Energy Savings!

Lumedio LED T8 tubes are the new standard for commercial lighting. These LED T8 tubes deliver a higher quality of light than fl uorescent T8s, while using a fraction of the power and lasting up to three times longer. Replace your fl uorescent tubes with Lumedio LED T8s and make your workspace lighting systems more effi cient today! The following spreadsheet shows how, with just one bulb, you can lower your costs and energy consumption!

T8 Evolution LED Tube Bulb Series715-362-4556

Lumedio LLC WarrantyAll Lumedio LLC bulbs, drivers, led chips, and ballasts are covered by a 3 year warranty against manufacturing defects.

The warranty period starts on the date of receipt of product. Warranty period is based on an ambient temperature of 25 °C with a 1cm gap around the product. Purchaser receives this ‘standard’ manu-facturer’s warranty by default. On request, an ‘extended warranty’ or ‘customized project warranty’ may be agreed on after evaluation of the specifi c application conditions.

This warranty only applies when the Product has been properly wired, installed and operated within the electrical values, operating range and environmental conditions provided in the specifi cations, application guidelines, International Electrotechnical Commission standards or any other document accompanying the Products. This warranty does not apply to damage or failure to perform arising as a result of any acts of nature or from any abuse, misuse, abnormal use or use in violation of any applicable standard, code or instructions for use including without limitation, those contained in the latest safety, industry and/or electrical standards for the relevant region(s), electrical power failure, low voltage, burned out main or branch fuses.

Limited WarrantyCompany warrants the materials supplied by Company against failure due to defects in material and manufacture and that it has the capacities and ratings set forth in Company’s catalogs and bulletins (“Warranty”). Should materials or components prove defective during the Warranty period, Customer shall return said components to Company for replacement. Company shall supply replacement ma-terials to Customer at no cost to the customer. Exclusions from this Warranty include damage or fail-ure arising from: corrosion, erosion, deterioration; modifi cations made by others to the Equipment; repairs or alterations by a party other than Company that adversely affects the stability or reliability of the Equipment; vandalism; neglect; accident; adverse weather or environmental conditions; abuse or improper use; improper installation; unusual physical or electrical stress; operation with any acces-sory, equipment or part not specifi cally approved by Company. Company’s obligations and liabilities under this Warranty are limited to furnishing replacement equipment or parts, at its option. No war-ranty liability whatsoever shall attach to Company until Customer’s complete order has been paid for in full and Company’s liability under this Warranty shall be limited to the purchase price of the Equip-ment shown to be defective. EXCEPT FOR COMPANY’S WARRANTY EXPRESSLY SET FORTH HEREIN, COMPANY DOES NOT MAKE, AND HEREBY EXPRESSLY DISCLAIMS, ANY WARRANTIES, EXPRESS OR IM-PLIED CONCERNING ITS PRODUCTS, EQUIPMENT OR SERVICES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF DESIGN, MERCHANTABILITY OR OF FITNESS FOR A PAR-TICULAR PURPOSE, OR OTHERS THAT ARE ALLEGED TO ARISE FROM COURSE OF DEAL-ING OR TRADE.

T8 Evolution LED Tube Bulb Series715-362-4556

130 S. Stevens Street • Rhinelander, WI 54501 • 715-362-4556lumedio.com

T8 Evolution LED Tube Series

ADDING LIGHT TO YOUR WORLD