T-Caddy - bene.com · © Bene GmBH, 01/2019 3 T-CADDY OPTIOnS Caddy large and Caddy small can be selected with a roller shutter front. This is made of recycled polypropylene and a

© Bene GmBH, 01/2019

1

T-CADDY

T-CADDYThe T Caddy family captivates with its distin-guished design idiom. They function as personal accessory furniture directly at the workplace and increase storage volume within the user’s imme-diate reach. Or they serve as mobile accessory furniture for team and project work, as well as for non-territorial work.

The top feature functions support a diverse range of uses with their additional storage, seating possibilities and organisation, and they can be customised to the personal requirements of indi-vidual workers or entire teams.


3

1

2

4

5

2

T-CADDYPRODUCT DeSCRIPTIOn

PRODUCT DESCRIPTIONBody19 mm chipboard Consisting of sides, bottom base, top base and, depending on the body type, with middle panel and structur-al floor.

Rear wall:19 mm chipboard 95 mm top projection.

Covered side16 mm chipboard with plastic grip.

Castor seat

Castors:synthetic material 2 braked and 2 unbraked.Optionally available in WI white, Am aluminium or SZ black

Name plate:each T-Caddy is delivered with a plastic nametag that can be positioned freely.The nametag is 106mm wide and 71mm high.

1

2

3

4

5

CARCASS TYPESSmall Medium Large

NICHE LABELSSmall Medium Large

1.1

2.1

1.2

2.2

1.1

2.1

1.1 1.2


3

T-CADDYOPTIOnS

Caddy large and Caddy small can be selected with a roller shutter front. This is made of recycled polypropylene and a plastic handle section.

OPTIONSCARCASS OPTIONS

NICHE OPTIONS

Hinged doors19 mm chipboard With inserted handle in aluminium.Internal strap hinges, opening angle 120° or opening angle 110° and dampened.

each niche can be individually fitted. The door hinge is always positioned on the outside of the body. The hinged door can also be connected via two niches to become a continuous hinged door.

With optional lock, this option always applies to the entire front. Lock position is always located on the opposite side of the door hinge.

Drawers19 mm chipboard With inserted handle in aluminium.The drawers are always self-closing, fully-extendable metal drawers, with optional shock absorption.

each niche can be individually fitted. Drawers are either configurable as “1 drawer” in a niche or as “2 drawers” in a niche.If two niches are stacked on top of each other, the structural floor between the two niches is removed.

With optional lock including locking bar for pull-out stop. The option always applies to the entire front. Lock position always on the right.

When installing hinged doors and/or drawers, counterweights must be installed due to the risk of tilting.For more information see chapter “Safety instructions”


4

T-CADDYOPTIOnS

OPTIONS

ACCESSORY TRAY

TOP FEATURES

Top Flap Top Box Top Board Top Seat

With rear pneumatic spring. Can be opened by simply lifting the flap, with the roller shutter front, this is done by means of a magnetic push snap.A lock, consisting of an interchangeable cylinder with two keys (one of which is foldable) is included. Posi-tion is always on the right. Also available without lock.

Top Flap, Top Box and Top Board are made of chipboard and are available for all Caddy types.Top Flap, Top Box, Top Board and Top Seat can be combined with each other.

The Top Board is not affixed and can be removed.

The Top Seat is only available for the Caddy Small. It is made of poly-urethane cold foam and covered by fabric.

The accessory pullout is always affixed to the bottom of the top floor. no drawer may be installed in the niche underneath.Depending on Caddy type, one or two accessory extensions can be attached (left and/or right).


5

T-CADDYORGAnISATIOn eLemenTS

ORGANISATION ELEMENTS

WIDTH DIVIDER

For compartmentalising a drawer.material & colour: Plastic, SZ black

Width: 326 mmHeight: 77 mm

LENGTH DIVIDER

In A5 or A6. In combination with a width divider.material & colour: Plastic, SZ black

A5 - Width: 221 mm Height: 73 mm

A6 - Width: 151 mm Height: 73 mm

TOP FLAP ORGANISATION

The Top Flap can be optionally equipped with the Flap Tray and/or Flap Board.

Flap TrayThe Flap Tray can be used for storing accessories and notebooks. Size according to Caddy type.material & colour: Felt, DG Grey.

Flap BoardThe Flap Board is suitable for use with pins. The size is always the same.material & colour: Felt, DG Grey.

Small + Large:Width: 840 mmDepth: 410mm

medium:Width: 429 mmDepth: 410mm

Width: 388 mmDepth: 350mm

ACCESSORY TRAY

Can be inserted in a drawer.material & colour: Plastic, SZ black

Width: 348 mmDepth: 258mmHeight: 25 mm

CARD INDEX TRAYS A6 HORIZONTAL

Installed in drawer. Two swivel plates included.material & colour: Plastic, PL platinum.

Width: 165 mmDepth: 345mmHeight: 120mm

SWIVEL PLATE, A6 HORIZONTAL

Can be horizontally suspended in the A6 card index tray.material & colour: Plastic, PL platinum.


6

T-CADDYORGAnISATIOn eLemenTS

ORGANISATION ELEMENTS HANGING CRADLE FOR DRAWER

Installable when 1 drawer is selected as the Caddy front.Optionally available with elevation.material & colour: Plastic feet in SZ black, frame in nickel-plated profile steel.


FILE TRAYS

1 set, installable in all open compartments with appropriate dimen-sions.material & colour: Plastic, SZ black

HANGING FILE BOX

Pull-out hanging file box with removable file frame for hanging files in A4 format. Installed in empty compartment.material & colour: Sheet panel, CR chrome and SZ black.



STATIONERY INSERT

For drawers with 6 sloped trays.material & colour: Plastic, SZ black


STAMP HOLDER

Installed in drawer.material & colour: Steel, SZ black.



61

3

35

6

873

392 392

61

3

35

6

873

235 392468

61

3

468

68

9

98

8

35

6

462

392

35

6

98

8

468

10

64

468

873

392 392

98

8

35

63

56

98

8

468

10

64

468873

235 392

98

8

35

63

56

7

T-CADDYDImenSIOnS

DIMENSIONS

SMALL

MEDIUM

LARGE

open with tambour with Top Box

open with Top Box

open with tambour with Top Box


8

T-CADDYDImenSIOnS

DIMENSIONS

INNER WIDTHS1 drawer 2 drawers Hinged door, 1 niche high Hinged door, 2 niches high





Top Box Top Board Top Seat

Width: 462 / 873 mmDepth: 468 mmHeight: 206 mm

Width: 430 mmDepth: 296 mmHeight: 93 mm

Width: 836 mmDepth: 444 mmHeight: 45 mm


9

T-CADDYSAFeTY InSTRUCTIOnS

SAFETY INSTRUCTIONSCOUNTERWEIGHT

To ensure that the Caddys stand securely, iron counterweights are installed depending on the dimensions of the body and front. Dimensions: Width 388 mm, depth 25 mm, height 60 mm. The weight is approximately 4,5 kg per counterweight.All the combinations that are not listed to do not require any counterweights.

Small Installation location Number of counterweights1 x 1 drawer 11 x 1 drawer and 1 x 2 drawers 21 x 1 drawer and 1 hinged door 12 x 1 drawer 4

Medium Installation location Number of counterweights1 x 1 drawer; 1 hinged door 1

Large Installation location Number of counterweights2 x 1 adjacent drawer 2

3 x 1 drawer 2

4 x 1 drawer 2

Given the weight, only niches with “1 drawer” are provided for the Caddy Large. The other niches can be configured as desired.


10

T-CADDY

INSPIRATIONS

Inspiration #02

T-Caddy medium with hinged door and two drawers

Inspiration #01

T-Caddy small with hinged door and two drawers


11

T-CADDY

INSPIRATIONS

Inspiration #03

T-Caddy large with two hinged doors


12

T-CADDY

COLOURS & MATERIALSMELAMINE: Basic colours MELAMINE: Additional basic colours 1

mW white mQ office white mP platinum mC canvas Tm clay

mS slate mB basaltmA aluminium mT anthracite

AR maple 1 BH beech light1eI oak 1 nG walnut grey

MELAMINE: Decor colours

MELAMINE: Decor, wooden texture1

CO coco textureCe elm white

MELAMINE: Accent colours 1

TX mustard

1 not available for compact top!


13

T-CADDY

COLOURS & MATERIALSVENEER: Maple

VENEER: Nut

VENEER: Oak

VENEER: Bamboo

VENEER: Beech

eY oak sylt

nF american walnut

AK canadian maple eR oak amaretto

nB walnut umbranR walnut siena

BG beech grey eV oak vulcano

nA wal. anthracite BJ bamboo

Different fabric collections are available as cover:Urban Plus, Xtreme Plus, Inn, Step, Step melange, Remix, europost, Field, Clara, Divina, Steelcut, Stamskin Top, Hallingdal, Steelcut Trio, Divina melange, Divina mD, Greenwich, Greenwich Uni.more information about the specific fabric collections is available at www.bene.com.

FABRIC

mW white mB basaltmA aluminiummC canvas

PLASTIC

Documents

T-Caddy - bene.com · © Bene GmBH, 01/2019 3 T-CADDY OPTIOnS Caddy large and Caddy small can be selected with a roller shutter front. This is made of recycled polypropylene and a