Upload
dangduong
View
219
Download
2
Embed Size (px)
Citation preview
Distributed by
SAVERZONE
SUPER
WINTER FLYER 2014Prices in effect from Jan. 2 to Apr. 30, 2014 or as otherwise noted, while quantities last.
Some items may not be exactly as shown.
DON’T MISS THE SUPER SAVER SPECIALS EACH MONTH!
January Deals...Page 2 February Deals...Page 5March Deals.....Page 6 April Deals.......Page 9
Quality products from a brand you can trust.
Range Order No. Resolution Remarks List Price SPECIAL
0-12” /0-300mm
500-193.0005” /0.01mm
No SPC $464.00 $417.60
500-168With SPC, OD & ID Carbide-tip jaws
$844.00 $759.60
• With exclusive ABSOLUTE encoder technology that always keeps track of the origin point once set
• High quality guide surface finish for smooth slider movement
ABSOLUTE DIGIMATIC CALIPER
BORE GAUGE SET
• Gauge stem Ø3/8”• With 2923SB-10 dial indicator and
protective indicator cover• Carbide-tipped contact points• With 26 anvils (2” sub-anvil) and 10
spacers• Optional extensions rods can be
attached Range Order
No. Graduation List Price SPECIAL
.7 - 6” 511-932 .0001” $1,002.00 $901.80
BORE GAUGE
• Individual gauge with 2109SB-10 dial indicator
• Range 50-150mm• With 11 anvils (50mm sub-
anvil) and 4 spacers
ORDER NO. 511-723 SPECIAL $402.30Reg. List $447
2
ABSOLUTE DIGIMATIC HEIGHT GAUGE
• ABSOLUTE encoder • Carbide-tipped scribed• With SPC data output• Resolution: .0005”/0.01mm or
0.01mm for metric only model
BLACK GRANITE SURFACE PLATES
Quality products from a brand you can trust.
Range Order No. List Price SPECIAL
600mm 570-304 $1,316.00 $1,184.40
24" / 600mm 570-314 $1,316.00 $1,184.40
OPTIONAL ACCESSORIES List SPECIAL 905338 SPC Cable 40” / 1m $46.30 $41.67905409 SPC Cable 80” / 2m $51.00 $45.90
Size Order No. Ht. List Price SPECIAL
12 x 18” 517-803 4” $284.00 $255.60
24 x 36” 517-808 5” $1,133.00 $1,019.70
36 x 48” 517-814 6” $2,387.00 $2,148.30
• Inspection Grade A• Meet or exceed Federal
Specification GGG-P-463c• Certificate of Accuracy
verifies traceability to NIST
Note:Stands sold separately
HORIZONTAL TYPE DIAL TEST INDICATOR
SAVERZONE
SUPER
• Long contact point type• Range: .03”• Resolution: .0005”• Complete set• Dial Reading 0-15-0• Anti-magnetic, jeweled bearings
ORDER NO. 513-412T SUPER SAVER PRICE $165.71Reg. List $227
WIDE RIGID RULE
SAVE 27%OFF REG. LIST
• Thickness 3/64”• Size: 12” (4R)• Graduations 1/8, 1/16, 1/32, 1/64ths• Clear graduations on satin-chrome
finish
ORDER NO. 182-121 SUPER SAVER PRICE $25.20Reg. List $35 SAVE
28%OFF REG. LIST
SUPER SAVER PRICES FOR THESE ITEMS ARE VALID FOR JANUARY 2014 ONLY
513-442T
DIAL TEST INDICATORS
Range Order No. Graduation Remarks List Price SPECIAL
.06”
513-442-06
.0005”
Black dial face $226.00 $203.40
513-442T* $242.00 $217.80
513-446T* Long contact point $266.00 $239.40
.03” 513-452T* Vertical type $204.00 $183.60
*Includes full set of accessories
513-452T
• Anti-magnetic, jeweled bearings• Dial 0-15-0
513-446T
3
Quality products from a brand you can trust.
DIGIMATIC HOLTESTTHREE-POINT INTERNAL MEASUREMENTS
• Measure to the bottom of a blind hole (up to 4”/ 1000mm models)
• Functions: Presetting, Zero/ABS, Auto power On/Off, Data hold, Data Output, Error Alarm, Battery replacement Alarm
• Ratchet Stop• Measures deep holes by attaching extension rod
(optional unless included with sets as noted)
468-979 Interchangeable Head Set. Each set includes one display unit with interchangeable measuring heads of
sizes specified, setting rings and extension rod
468-270 Individual Gauge
568 Series Interchangeable Head Set. Each set includes one display unit with interchangeable measuring heads as specified, settings rings and
extension rod
TiN coated contact points for excellent durability
468 Series Individual Gauges (Inch/Metric)
Range Order No. List Price SPECIAL
1.2 - 1.6" /30.48 - 40.64mm 468-268 $1,418.00 $1,276.20
1.6 - 2" / 40.64 - 50.8mm 468-269 $1,495.00 $1,345.50
2 - 2.5" / 50.8 - 63.5mm 468-270 $1,707.00 $1,536.30
468 Series Interchangeable Head Sets (Inch/Metric)
Range Order No.
Individual range Setting rings included List Price SPECIAL
.275 - .5"/ 6.925 - 12.7mm
468-976 .275-.35".35-.425" .425-.5"
.35" DIA.,
.425" DIA. $2,168.00 $1,951.20
.5 - .8"/ 12.7 - 20.32mm
468-977 .5-.65", .65-.8"
.65" DIA. $1,780.00 $1,602.00
2 - 4" / 50.8 - 101.6mm
468-979 2-2.5", 2.5-3", 3-3.5", 3.5-4"
2.5" DIA., 3.5" DIA $5,037.00 $4,533.30
568 Series Borematic (Inch/Metric)
Range Set Order No.
Adaptor Supplied
Individual Head No.
Setting rings included
List Price SPECIAL
.275” - .5” / 6.985 - 12.7mm
568-928 954595 04AZB139 04AZB140 04AZB141
.35" DIA.,
.425" DIA. $2,370.00 $2,133.00
.5” - 1” / 12.7 - 25.4mm
568-929 216556 04AZA721 04AZA722
.65" DIA., .8" DIA. $2,483.00 $2,234.70
216557 04AZA730
1” - 2” / 25.4 - 50.8mm
568-930 216557 04AZA731 04AZA739 04AZA740
1.2" DIA., 1.6" DIA. $2,972.00 $2,674.80
2” - 4” / 50.8 - 101.6mm
568-936 216558 04AZA754 04AZA755 04AZA756 04AZA757
2.5" DIA., 3.5" DIA.
$4,893.00 $4,403.70
BOREMATIC - ABSOLUTE DIGIMATIC SNAP BORE GAUGES
• Take measurements more accurately and quickly• ABSOLUTE encoder retains the setting for the entire battery life• TiN coated measuring contact points
• SPC data output• 330o rotatable display unit for
easy reading at any angle• GO/NG judgement
Setting rings are optional for individual gauges
OPTIONAL ACCESSORIES List SPECIAL 905338 SPC Cable 40” / 1m $46.30 $41.67905409 SPC Cable 80” / 2m $51.00 $45.90
OPTIONAL ACCESSORIES List SPECIAL 05CZA662 SPC Cable 40” / 1m $100.00 $90.00 05CZA663 SPC Cable 80” / 2m $147.89 $133.02
4
Quality products from a brand you can trust.
SAVER
TUBULAR INSIDE MICROMETERS
Range Order No. Graduation Ext. Rods List Price SPECIAL
50 - 300mm 137-202 0.01mm 13, 25, 50mm
(2 pcs.), 100mm $376.00 $338.40
2 - 40” 137-214 .001” .5”, 1”, 2” (2pcs.), 4”, 8” (2 pcs.), 12” $605.00 $544.50
• Extension rod type• Wide range of ID
measurements by combining extension rods and anvils with the micrometer head
• Micrometer Head travel: .5” or 13mm
TUBULAR INSIDE MICROMETER SET
Range Order No. Graduation StemDia. / Style / Face List Price SPECIAL
0 - 13mm 148-503 0.01mm Small size with Zero-adjustable thimble 9.5mm / Plain / Flat $70.00 $63.00
0 - .5” 149-147 .001” Small size with Carbide-tipped spindle .375” / Clamp nut / Flat $71.00 $63.90
0 - 1” 152-372 .0001” Large thimble type for fine feeding. Bi-directional graduation .5” / Plain / Flat (carbide tip) $280.00 $252.00
0 - 1” 152-392 .0001” For X-axis, Bi-directional graduation .709” / Plain / Flat (hardened with non-rotating device $290.00 $261.00
148 Series152 Series Large Thimble type
MECHANICAL MICROMETER HEADS
DIGIMATIC MICROMETER HEADS
• Display can be rotated 330o for easy reading in any position
Range Order No. Resolution List Price SPECIAL
0 - 2”/0-50.8mm 164-164 .00005”/
0.001mm $945.00 $850.50
• Digimatic output port enables inclusion in an SPC control or networked measurement system
• IP65 protection
Range Order No. Resolution List Price SPECIAL
0 - 1”/0-25.4mm 350-352-10 .00005”/
0.001mm $372.00 $334.80
• Range: 2 - 12”• Single rod type• Set of 10 in fitted case• Zero point can be readjusted by rotating the
micrometer head sleeve• Carbide-tipped measuring faces
Order No. Graduation List Price SPECIAL
133-904 .001” $1,784.00 $1,605.60
PITCH GAUGE
Order No. Range Leaves List Price SPECIAL
188-121 0.4-7mm 18 $31.00 $27.90
5
Quality products from a brand you can trust.
DIAL CALIPER
SAVERZONE
SUPER
• TiN coating is applied to the sliding surface for excellent wear resistance
• Range: 0-6”• Graduation: .001”• .1” range per revolution• Carbide-tipped jaws for OD & ID measurement
ORDER NO. 505-712SUPER SAVER PRICE $209.35Reg. List $265
12 PIECE MICROMETER SET
SAVE 21%OFF REG. LIST
• Range: 0-12”• Includes 12 micrometers and 11
standards• Graduation: .0001”
ORDER NO. 103-908-40 SUPER SAVER PRICE $1,821.60Reg. List $2,070
SUPER SAVER PRICES FOR THESE ITEMS ARE VALID FOR FEBRUARY 2014 ONLY
OUTSIDE MICROMETERS
Range Order No. Graduation List Price SPECIAL
25 - 50mm 103-138 0.01mm $116.00 $104.40
5 - 6” 103-220 .0001” $197.00 $177.30
12 - 13” 103-189 .001” $440.00 $396.00
• Ratchet Stop• With standard bar• Hammertone, baked-enamel finish 3 PC. OUTSIDE MICROMETER SET
• Set of 3 micrometers & 2 standard bars• Hammertone, baked-enamel finish
• Ø4mm measuring rod• Ratchet stop• With measuring rod clamp• Base size: 4” x .63”
Range Order No. Graduation List Price SPECIAL
0 - 1” 128-106 .001” $142.00 $127.80
Range OrderNo. Graduation List Price SPECIAL
0-3” 103-922 .0001” $396.00 $356.40
HALF-BASE DEPTH MICROMETER
• With 6 pcs. interchangeable measuring rods (.157” DIA.)
• Locking clamp• Ratchet stop• Base width x .63”
Range Order No. Graduation List Price SPECIAL
0 - 6” 129-332 .001” $257.00 $231.30
DEPTH MICROMETER
SAVE 12%OFF REG. LIST
6
Quality products from a brand you can trust.
STANDARD VERNIER CALIPER
SAVERZONE
SUPER
• Measures OD, ID, depth and steps• With inch/inch dual scale• Range: 0-8”• Vernier Graduation: Lower scale .001”,
Upper scale 1/128”
ORDER NO. 530-116SUPER SAVER PRICE $93.94Reg. List $122
DEPTH MICROMETER
SAVE 23%OFF REG. LIST
• Range: 0-6”• Graduation: .001”• Base size 2.5 x .63”• 6 rods included• Ratchet stop
ORDER NO. 129-128 SUPER SAVER PRICE $181.50Reg. List $242
SUPER SAVER PRICES FOR THESE ITEMS ARE VALID FOR MARCH 2014 ONLY
SAVE 25%OFF REG. LIST
Range Order No. Remarks Resolution List Price SPECIAL
0 - 1”/ 0-25.4mm 293-180 With SPC .00005” /0.001mm
$343.00 $308.70
1 - 2” / 25.4-50.8mm 293-186 No SPC $316.00 $284.40
• Faster measurement with 2mm per revolution instead of standard 0.5mm
• Patented ratchet thimble mechanism helps ensure repeatability
• IP-65 rated protection level• With or without SPC output
QUANTUMIKE COOLANT PROOF MICROMETER
DEEP THROAT MICROMETER
• Measures thickness of sheet metal, paper, plastic and rubber parts
• Ratchet stop• Range: 0-1”• Spherical anvil and
spherical spindle
Order No. Graduation List Price SPECIAL
118-120 .0001” $228.00 $205.20
1.08”
6.3”
SPECIAL APPLICATION MICROMETERS
Range Order No. Graduation Type Remarks List Price SPECIAL
0 - 1”112-225
.001”
Point Micrometer Pointed spindle and anvil, Ratchet stop, .012”/0.3mm point radius $148.00 $133.20
126-901 Screw Thread Micrometer
Ratchet stop, with interchangeable anvil-spindle set for Metric/Unified screws (60o threads)
$805.00 $724.50
1 - 2” 126-902 $880.00 $792.00
0 - 1”/0-25.4mm 395-371 .00005”
/0.001mmSpherical Face Micrometer
IP65 protection, Digital model for wall thickness of tubing with spherical anvil and spherical spindle, Ratchet stop, SPC output $464.00 $417.60
112-225 126-901 395-371
OPTIONAL ACCESSORIES List SPECIAL 05CZA662 SPC Cable 40” / 1m $100.00 $90.00 05CZA663 SPC Cable 80” / 2m $147.89 $133.02
7
Quality products from a brand you can trust.
Order No. Graduation List Price SPECIAL
118-120 .0001” $228.00 $205.20
Range Order No. Resolution List Price SPECIAL
0 - 6” / 0-150mm 500-762-10 .0005” /0.01mm $271.00 $243.90
ABSOLUTE COOLANT PROOF CALIPER
• Dust/Water protection conforming to IP67 can be used in workshop conditions exposed to coolant, water, dust or oil
• With SPC output
OPTIONAL ACCESSORIES List SPECIAL 05CZA624 SPC Cable 40” / 1m $108.00 $ 97.2005CZA625 SPC Cable 80” / 2m $115.00 $103.50
DIAL CALIPERS
Range Order No. Graduation Range/Rev List Price SPECIAL
0- 150mm 505-671 0.02mm 2mm $176.00 $158.40
0 - 6” 505-689 .001” .1” $183.00 $164.70
• Ultra-smooth sliding and high shock protection• TiN coating is applied to sliding surface for increased wear resistance• Measures OD, ID, depth and steps
UNIVERSAL TEST INDICATORS
• Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360o without moving the indicator
• Full set of accessories• Jeweled bearings
Range Order No. Graduation List Price SPECIAL
0.8mm 513-304GT 0.01mm $539.00 $485.10
.03” 513-302GT .0005” $539.00 $485.10
POCKET TYPE TEST INDICATORS
• Jeweled bearings• Reversible measuring direction• Fully adjustable bezel/dial face• Contact point is adjustable within 220o
Range Order No. Graduation
.02” 513-512T .0005”
.04” 513-518T .001”
513-518T
ORDER NO. 513-512T SPECIAL $182.70Reg. List $203Dial 0-10-0Long contact point type
ORDER NO. 513-518T SPECIAL $158.40Reg. List $176Dial 0-20-0
VERNIER CALIPERS
Range Order No. Graduation Remarks List Price SPECIAL
0-150mm 530-101 0.05mm Standard model $97.00 $87.30
0-300mm/0 - 12” 530-119 Lower: 0.02mm
Upper: .001”Metric/Inch dual scaleHigh accuracy model $265.00 $238.50
0-180mm/0 - 7” 532-120 Lower: 0.02mm
Upper: .001”With Fine Adjustment, Metric/Inch dual scale $139.00 $125.10
0-200mm 536-102* 0.05mm Offset Caliper $359.00 $323.10
*Main scale jaw can slide up and down to facilitate measurement of stepped sections and difficult access dimensions
530-119 532-120 536-101
51.
8
Quality products from a brand you can trust.
SAVER
2046S-01
• Popular indicators for a wide range of applications
• Lug back• ANSI/AGD Type• Stem Dia. 3/8”
2Shockproof, jeweled bearings, Coaxial revolution counter
Series 2 - Face diameter of 2.24”/57mm
Range Range/Rev Order No. Graduation Dial List Price SPECIAL
10mm 1mm 2046S-01 0.01mm 0-100 $105.00 $94.50
25mm 1mm 2056S-01 0.01mm 0-100 $149.00 $134.10
.125” .05” 2922S .0005” 0-25-0 $116.00 $104.40Series 3 - Large diameter face of 3.07”/78mm)
.5” .1” 3415S .001” 0-50-0 $157.00 $141.30
3” .1” 3426S-19* .001” ±0-100 $305.00 $274.50
SERIES 2 and 3 DIAL INDICATORS
3415S
Range Order No. Resolution List Price SPECIAL
.5”/12.7mm
543-392.00005”/0.001mm
$482.00 $433.80
543-392B* $482.00 $433.80
543-402B* .0005”/0.01mm $339.00 $305.10
• Answers the need for superior shop-floor performance, even in harsh conditions.
• ABSOLUTE encoder technology• Display reversing function (0o,
180o)• Compact design (1.38”/35mm
wide) is an ideal advantage for multiple point measurements
• ANSI/AGD - Stem dia. 3/8”• Lug back• With SPC output• IP66 Protection
*Flat back
• Selectable resolution• With Backlit LCD screen• ABSOLUTE encoder technology• GO/NG judgment. Backlighting
changes from green to red for quick visual recognition
• SPC output• Stem dia. 3/8”
ORDER NO. 543-558ASPECIAL $713.70Reg. List $793.00
ABSOLUTE ID-F INDICATOR
ABSOLUTE ID-B INDICATOR
Range Order No. Resolution List Price SPECIAL
.22”/5.6mm 543-581 .0005”/
0.01mm $432.00 $388.80
Range Order No. List Price SPECIAL
2”/50.8mm 543-558A $793.00 $713.70
OPTIONAL ACCESSORIES List SPECIAL 936937 SPC Cable 40” / 1m $66.80 $60.12965014 SPC Cable 80” / 2m $95.00 $85.50
OPTIONAL ACCESSORIES List SPECIAL 21EAA194 SPC Cable 40” / 1m $51.00 $45.9021EAA190 SPC Cable 80” / 2m $60.00 $54.00
ABSOLUTE ID-C INDICATOR
• As compact as standard Series 2 dial indicators
• Set upper and lower tolerance limits to perform GO/NG judgment
• ABSOLUTE encoder • No overspeed errors• With SPC data output
OPTIONAL ACCESSORIES List SPECIAL 905338 SPC Cable 40” / 1m $46.30 $41.67905409 SPC Cable 80” / 2m $51.00 $45.90
9
Quality products from a brand you can trust.
ABSOLUTE DIGIMATIC CALIPER
SAVERZONE
SUPER
• Size: 12” x 300mm• Graduations: 1/2mm, 1mm, 1/32, 1/64, 1/16ths• Engraved on front size only
ORDER NO. 182-305SUPER SAVER PRICE $22.32Reg. List $31
SEMI-FLEXIBLE RULE
SAVE 28%OFF REG. LIST
• Range: 0-24” / 0-600mm• Resolution: .0005” / 0.01mm• Without thumb roller• ABSOLUTE encoder technology• With SPC data output
ORDER NO. 500-506-10 SUPER SAVER PRICE $865.20Reg. List $1,030
SUPER SAVER PRICES FOR THESE ITEMS ARE VALID FOR APRIL 2014 ONLY
SAVE 16%OFF REG. LIST
INDICATOR STAND
ABSOLUTE DIGIMATIC DEPTH GAUGE
• ABSOLUTE encoder technology keeps track of the origin point once set for the entire life of the battery
• With SPC data output• Base and measuring faces are hardened and micro-lapped
Range Order No. Resolution List Price SPECIAL
6”/ 150mm 571-211-20 .0005”/0.01mm
$457.00 $411.30
12” / 300mm 571-263-10* $672.00 $604.80
OPTIONAL ACCESSORIES List SPECIAL 959149 SPC Cable 40” / 1m $61.50 $55.35959150 SPC Cable 80” / 2m $69.00 $62.10
*IP67 Coolant Proof model
• Accepts all dial and dial test indicators
• ON-OFF switch offers instant mounting and dismounting without any adverse affect to indicators or work surface
• With fine adjustment
ORDER NO. 7011SNSPECIAL $94.50Reg. List $105
Range Order No. List Price SPECIAL
8”/200mm 950-213 $42.00 $37.80
6”/150mm 950-222 $36.00 $32.40
4”/100mm 950-231 $27.00 $24.30
8”/200mm 950-233 $42.00 $37.80
950-213 950-222 950-231 950-233Spring divider Outside spring caliper Inside spring calipers
SPRING DIVIDERS & CALIPERS
INDIVIDUAL GAUGE BLOCKS
Length Order No. Grade List Price SPECIAL
.5 611195-531 0 $40.00 $36.00
2” 611202-531 0 $66.00 $59.40
2” 611202-541 AS-1 $55.00 $49.50
10
Quality products from a brand you can trust.SURFTEST 411
SURFACE ROUGHNESS TESTER
FEATURES
• Both skidded and skidless measurement • Equipped with 46 roughness parameters that conform to the
latest ISO, DIN, ANSI, and JIS standards• A wide-range, high-resolution detector and a drive unit provide
superior high-accuracy measurement in its class• A skidless detector and a curved surface compensation function
provide efficient evaluation of cylinder surface roughness.• Ultra-fine steps, straightness and waviness can be measured by
using the skidless measurement function• The handheld data processing unit and the 5.7-inch color graphic
LCD touch-panel with backlight provides superior readability and operability
• Measured data can be output to a PC with optional RS-232C or USB cable
• Digital filter function for non-distorted roughness profiles, GO/NG judgment function, Auto-calibration function with 16 languages supported
• Simplified contour analysis function supports the four types of measurement: step, level change, area and coordinate difference
SPECIFICATIONS
Model No. SJ-411 SJ-411
Order No. (inch/mm) 178-581-01A 178-581-02A
Detector measuring force 0.75mN 4mN
SPECIAL $7,290.00
Reg. List $8,100.00
Evaluation range 25mm
Detector Measuring Range 800µm
Resolution 0.000125µm (at 8µm range)
Drive Unit Straightness/Traverse Length
0.3µm/25mm
OPTIONAL ACCESSORIES List SPECIAL 178-039 Manual column stand $890.00 $801.00178-010 Auto-Set Unit for stand $4,120.00 $3,708.00
Optional attachments for mounting on a column stand significantly increase the operability.
Auto-set unit
Column Stand
RA-10ROUNDNESS TESTER
FEATURES
• The key layout is large and simple, easy to view and understand• One-time setup recall function: Complex setups are stored in
advance, ready for recall when required by one-key operation.• Zero-setting function: The detector’s level can be set to zero (0)
with one single key press. This relieves the user from the chore of meticulously positioning the detector.
• Despite being a low-priced model, the rotary table with air bearings offers rotational accuracy as high as (0.04+6H/10000)µm, thus assuring a precision that compares well to that of higher models.
• Large LCD panel displays measurement results and recorded profiles in an easy-to-view fashion
• The machine calls for only a small installation space as its compact body integrates electronics and printer.
ORDER NO. 211-601PCK SPECIAL $12,447.00
Reg. List $13,830.00
RA-10 Roundness Measuring tester complete with X-axis stop and Z-axis scale unit
Z-axis scale unitX-axis stopper
SPECIFICATIONS
Model No. RA-10
Order No. 211-601PCK
Max. probing diameter
ø 3.94” (100mm)
Max.workpiece diameter
ø12.6” (320mm)
Max.workpiece weight
22 lbs (10kg)
Data analysis Roundness, Coaxiality, Concentricity, Flatness, Circular runout (radial)
11
Quality products from a brand you can trust.Digimatic Micrometer OR
Digimatic CaliperFREE with purchase of DRO package
Package consists of:• One X Axis Scale• One Y Axis Scale• KA Counter (2 or 3 axis)Bracket kits & mountinghardware are optional
DRO PACKAGES:Code Description Price
174-173A KA Counter (2-axis) $599.00
174-175A KA Counter (3-axis) $743.00
Your choice X-axis (choose below)see table
Your choice Y-axis (choose below)
SPECIAL BONUS
Digimatic Micrometer
Digimatic Caliper
FREE!with package
purchase
BUILD YOUR OWN DRO PACKAGE
Bracket Kit for GrindersOrder No. 64AAB194PRICE $425.00
Bracket Kit for LathesOrder No. 64AAB191PRICE $307.00
Bracket Kits for Milling Systems (Order items separately as required) PRICE
64AAB196 Universal bracket kit (12”) $254.0064AAB197 Universal bracket kit (14-16”) $259.0064AAB199 Screw kit $ 42.00
Other Accessories (all Systems)64AAB200 Machine Arm Kit (KA Counter) $213.00
AT715 LINEAR SCALESCode Length Price
539-801 AT715-4"/100 $378.00
539-802 AT715-6"/150 $378.00
539-803 AT715-8"/200 $380.00
539-804 AT715-10”/250 $380.00
539-805 AT715-12"/300 $384.00
539-806 AT715-14"/350 $386.00
539-807 AT715-16"/400 $390.00
539-808 AT715-18"/450 $395.00
539-809 AT715-20"/500 $399.00
539-811 AT715-24"/600 $410.00
539-813 AT715-28"/700 $415.00
539-814 AT715-30"/750 $425.00
539-815 AT715-32"/800 $430.00
539-816 T715-36"/900 $458.00
539-817 AT715-40"/1000 $475.00
AT715 LINEAR SCALESCode Length Price
539-818 AT715-44"/1100 $495.00
539-819 AT715-48"/1200 $542.00
539-820 AT715-52"/1300 $574.00
539-821 AT715-56"/1400 $607.00
539-822 AT715-60”/1500 $643.00
539-823 AT715-64"/1600 $678.00
539-824 AT715-68"/1700 $722.00
539-825 AT715-72"/1800 $757.00
539-860 AT715-80"/2000 $954.00
539-861 AT715-88"/2200 $1,029.00
539-862 AT715-96"/2400 $1,221.00
539-863 AT715-100"/2500 $1,396.00
539-864 AT715-104"/2600 $1,438.00
539-865 AT715-112"/2800 $1,535.00
539-866 AT715-120"/3000 $1,600.00
OR
• IP65 Protection level• Range: 0 - 1”/0-25.4mm• Resolution: .0005”/0.001mm
ORDER NO. 293-340List Price $215.00YOURS FREE! WITH DRO PACKAGE PURCHASE
• Same AOS electromagnetic induction type ABSOLUTE encoder as top-of-the-line coolant proof calipers
• Detection signal is not affected by dirt (water, oil, etc.) on surface of scale
• Range: 0 - 6”/0-150mm• Resolution: .0005”/0.01mm
ORDER NO. 500-196-30List Price $172.00YOURS FREE!WITH DRO PACKAGE PURCHASE
COOLANT-PROOF DIGIMATIC MICROMETER
BONUSOFFER
FREE*
FREE*
*Bonus offer valid with minimum purchase of two linear scales and KA counter unit (ordered at same time). Please specify your free product preference at time of order.
CMM
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We, therefore, reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority.
We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm with your customer service rep. Some items may not be exactly as shown. Prices are in Canadian dollars, unless otherwise specified. Applicable taxes and shipping charges are extra.© 2014 Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice.
www.mitutoyo.ca Toronto (905) 821-1261 Montréal (514) 337-5994Mitutoyo Canada Inc.
12
Leading the way for
PRODUCTIVITY & PRODUCTION
Included with each CNC Coordinate Measuring Machine and Vision System, the Gold Care Productivity Pack reduces theoverall cost of ownership by including: + TWO YEAR WARRANTY + TWO YEAR CALIBRATION AGREEMENT + MEASURLINK® PRO EDITION QUALITY DATA + MANAGEMENT SOFTWARE + MITUTOYO ECO-FIX® FIXTURE SYSTEM + MITUTOYO STARTER STYLUS KIT + LIFETIME SOFTWARE TECHNICAL PHONE SUPPORT
GOLD CARE PRODUCTIVITY PACK
CMM SURFTEST PROBE SYSTEMEliminates Workpiece Changeover to Second Measurement Device
Surface Roughness Measurement directly on the CMM!This latest Mitutoyo probe head closes the gap between typical dimensional CMM measurements and surface roughness inspection. Instead of having to take the workpiece to another measuring instrument or using additional portable systems, the SURFTEST Probe adds roughness measurement capability to your CMM and so avoids all the cost and inconvenience of additional systems. It brings the proven technology of the SJ-310 series to the CMM with all its highly capable range of detectors developed for handling specialist applications such as roughness measurement on gears, inside small holes or deep grooves, in addition to simple flat surface measuring tasks.• Proven technology from Mitutoyo’s SJ-310 Surftest• Choose from five types of detector for variant applications• High accuracy – no CMM movement during measurement• One CNC measurement cycle produces all results• Graphical and numerical output• One Measurement report for all GD&T requirements
CALL TODAY FOR MORE INFORMATION OR TO REQUEST
A QUOTATION
CALL TODAY FOR A DEMONSTRATION