Upload
sai-teja
View
222
Download
0
Embed Size (px)
Citation preview
8/10/2019 Summer Vacation Courses 2014
1/2
Ph. No. 040-23772749, 23776178, 23772747, Fax: 040-23772658,E-mail: [email protected], Website:www.citdindia.org
SUMMER / VACATION COURSES
On
CAD/CAM,AUTOMATION,
VLSI,
MICRO-CONTROLLERS
About CITD: The Central Institute of Tool Design is a premier Institute in Asia to provide specialised
training courses in Tool Engineering, CAD/CAM and Automation. The Institute was established in the year1968 by the Government of India with the assistance of UNDP and ILO as an executing agency. TheInstitute conducts training programmes right from Diploma to Post Graduation level. The institute is also
conducting 2 M.E. programmes (CAD/CAM & Tool Design) in collaboration with Osmania University andM-Tech (Mechatronics) in collaboration with JNTUH, Hyderabad. The Institute conducts International
training programmes in CAD/CAM, Tooling and Automation areas.
In addition to the training programmes, the Institute also undertakes Design and manufacture ofToolings/Precision Components, Assemblies and Automation Systems. The Tool Room is equipped with
sophisticated machines such as CNC 5-Axis & 4-Axis Vertical machining centres from Bridgeport, USA,
Hardinge CNC Lathe, CNC Charmilles Roboform EDM, CNC AGIE Wirecut EDM machine, Kellenberger
CNC Cylindrical Grinding etc., supported by a Metrology Laboratory with CNC CMM with Reverse
Engineering Facility and a calibration centre to maintain Quality standards.
The Institute is having a Library and Documentation centre with vast collection of Books, Journals,
Literature and Standards.
The CAD/CAM centre at CITD is equipped with around 500 latest Workstations, Full Scale Plotter, Scanner,
CD writers and Licensed Softwares like Autodesk Inventor Series, PRO-E / CREO, CATIA,
UNIGRAPHICS, ANSYS, HYPERMESH, NASTRAN, ABBAQUS, LS DYNA, MOULDFLOW,
SOLIDCAST, SOLIDWORKS, Q- FORM, MASTERCAM, DELCAM etc., The centre is also having CNC
Table top Lathe and Milling machines from Emco-meir, Austria. The centre provides night lab facility also.
The Automation centre at CITD is equipped with various simulator training kits from FESTO, Germany like
Pneumatics Trainer, Electro-Pneumatics Trainer, Hydraulics Trainer, Electro-Hydraulics Trainer, ClosedLoop Hydraulics Trainer, PLC Trainer, Sensors Trainer, Modular Production System, Cut Section models of
various Elements, Transparent working models of Hydraulic elements etc.,
The VLSI & Embedded systems labs are equipped with latest hardware like Highend Work Stations withLinux operating system, Verilog, FPGA kits, VHDL, Cadence including the Analog Controls, Tanner Tools,
Micro Controllers 8051, AVR, Zylog, ARM, Keil software, VX Works etc.,
The Institute in order to provide hands on exposure to the engineering student fraternity on the latesthardware, software and CNC machines, metrology and automation, planning to organise the following
courses during semester holidays.
MOBILE: +91 99897 10105
http://www.citdindia.org/http://www.citdindia.org/8/10/2019 Summer Vacation Courses 2014
2/2
CAD/CAM AUTOMATION & ROBOTICS VLSI & EMBEDDED SYSTEMS CNC TOOL ROOM HOSTEL
S No. Course Title DurationFee per Participant
(Inclusive of Reg. Charges)
1. AutoCAD (2D & 3 D Modeling) 1 Week, 3 hrs / day For S No. 1 & S No.2
Rs. 3,500/-2. CNC Programming (Milling & Turning) 1 Week, 3 hrs / day
3. ProE / Creo (Modeling, Assembly & Drafting) 1 month, 3 hrs / day For any two Software
courses from S No. 3 to
S No. 10
or
Any one software
Course along with S No.
1 & S No. 2
Rs.7,000/-
4. Catia (Modeling, Assembly & Drafting) 1 month, 3 hrs / day
5. Solidworks (Modeling, Assembly & Drafting) 1 month, 3 hrs / day
6. Ansys (Structural & Thermal Analysis) 1 month, 3 hrs / day
7. Hypermesh ( Shell Mesh & Solid Mesh) 1 month, 3 hrs / day
8. Unigraphics (Modeling, Assembly & Drafting) 1 month, 3 hrs / day
9. Delcam (Design & Milling) 1 month, 3 hrs / day
10. Mastercam (Design, Turning & Milling) 1 month, 3 hrs / day
11. A course on Mechatronics 1 month, 3 hrs / day Rs. 5,000/-
12. A course on Verilog 1 month, 3 hrs / day Rs. 5,000/-
13. A course on VHDL 1 month, 3 hrs / day Rs. 5,000/-
14. A course on Micro controller 1 month, 3 hrs / day Rs. 5,000/-
MSME-TOOL ROOM, HYDERABADCENTRAL INSTITUTE OF TOOL DESIGN
(Ministry of MSME - A Government of India Society)Balanagar, Hyderabad-500 037
Ph.No. 040-23772749, 23776178, 23772747, Fax: 040-23772658,E-mail: [email protected], Website:www.citdindia.org
Mobile: +91 99897 10105
SUMMER / VACATIONAL COURSES
ON CAD/CAM, AUTOMATION, VLSI and MICRO CONTROLLERS
Eligibility:Students pursuing B.E / B. Tech or Diploma in Mechanical / Production / Electrical / Electronics /
Instrumentation / Automobile / Aeronautical / Civil Engineering.
Note: 1. The above Courses will be commenced on every Wednesday from April to July / December to January.2.For 3rd year students Mini Projects & Inplant Training will be provided to all the Participants.3. For SC/ST candidates fee wavier will be provided as per Govt. of India norms.
4.Limited hostel facility is available on chargeable basis.
5.For admissions, students should come along with college Bonafide Certificate, College ID, Photo ID cardissued b Govt. & Pass ort Size Photo ra hs.
Sub-Centre: 54-2-9, Phase III, Autonagar, Vijayawada520 007, Ph. No. 0866-2540560. Mob: +91 98854 29054
Sub - Centre Vishakhapatnam: Govt. ITI College Campus, Kancharalapalam, Visakhapatnam. Mob: +91 90599 10881
Extension Centre Chennai: MSME-DI Campus, 65/1 GST Road, Guindy, Chennai, Ph. No. : 044-22500366, Mob: +91 96770 68917
Extension Centre Kolar: Shed No D - 31, 32, KSIDC, Industrial Estate, Kolar Gold Field, Karnataka. Mob: +91 89701 48758