Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
PRODUCT SPECIFICATION
All Street Design products are designed and manufactured using only quality, durable materials, construction details and fixings, to provide a long-lasting, durable life expectancy.
Timber policyAll treated softwood planters are manufactured using materials obtained from growers who operate under
® ®the Forest Stewardship Council (FSC )All iroko hardwood planters are manufactured using materials obtained from growers who operate under the
® ®Forest Stewardship Council (FSC )
Bournemouth planters in manufacture Bournemouth planters with optional Spalding curved planter bench
Construction
Assembly
Materials
Options
Accessories
capping will have a polyester powder coated finish.The optional stainless steel top capping will have a dull polished finish.
Aluminium sheet, mild steel angle, flats and hollow section and optional stainless steel flat.FSC treated Eucalyptus plywood. Planters will be fitted with a geotextile filter fabric lining, which allows the water to drain through the planter, while retaining the fill material.
Where possible planters will be delivered to site fully assembled for off loading and positioning on site.Larger planters can be manufactured in sections for bolting together on site.
Bournemouth planters are manufactured to order.Before we can manufacture the planters, we need to know the following:• plan size of planters• heights• details of accessories required
To enhance your Bournemouth planter and create a product that is suitable for your specific application, you can choose from a range of planter accessories.
• Adjustable feet• Watering system• Integral bench seating• Base skirting• Pergola structures• Trellis panels
BOURNEMOUTH planter
Large Bournemouth planters, loaded, ready for delivery
Street Design LimitedUnit 35Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 11/B
Standard finish
The aluminium planter body and top
Due to continued product improvement, Street Design Limited reserves the right to change the product specification
Technical information
Material
Adjustable feetTree anchor fittingsBench seating
Accessories
Guarantee
Standard planter heights
Planting depths
Typical Weights
626mm Ø planter
955mm Ø planter
Light fill material can be based on:
Heavy fill material can be based on:
All planters are guaranteed for 15 years minimum
407mm
Watering systemsTrellis panelsPergola structures
Base floor
Planter feet
Planter walling panel finish
Planter walling panels
Hammerite painted
®18mm thick FSC certified treated plywood
48.3 Ø x3mm CHS and 100x100x5mm mild steel plate
Polyester powder coated
4mm thick aluminium sheet
Planter dimensions and weights
Planter lining Terram 1000 geotextile membrane
Base finish
Optional top capping
Top capping
80x8mm grade 304 stainless steel
76.2x9.5mm aluminium flat
Base material
Internal wall supports
75x50x3 RHS, 50x50x5 Angle and 50x10mm mild steel flat
50x4mm aluminium
Optional top capping finish Dull polished
1000 kgs / m³
2000 kgs / m³
Typical Capacity - internal fill volume
626mm Ø planter
955mm Ø planter
0.51 m³
0.63 m³0.28 m³
1.15 m³
907mm
0.28 m³0.13 m³
560mm 1060mm
47 kgs
57 kgs
58 kgs
73 kgs
1273mm Ø planter
1273mm Ø planter 102 kgs 123 kgs