1
Introducing Sangoma’s new fiber mulplexer that can rearrange an STM-1 or OC-3 fiber signal into 63 E1 or 84 T1 framing. Sangoma offers this cost-effecve and reliable soluon, consistent with the quality and affordability of its other product families. As demand and bandwidth needs increase in today’s telecommunicaons and data network, large economies of scale can be achieved by substung mulple single T1/E1 trunks with a single fiber connecon running at 155 Mbps. A STM-1 or OC-3 interface will reduce overall expenses and control costs by combining data and voice applicaons over one circuit. Depending on the market, the benefits can be seen as soon as you subscribe to more than 20 T1 or E1 circuits simultaneously. The STM1Mux is a 155 Mbps fiber mulplexer that interfaces with the STM-1/ OC-3 network via a standards-based SFP transceiver with single mode fiber with LC connectors. The T1/E1 connectors are RJ-48, each carrying 2 T1/E1 per connector, in a DSX pinout. The STM1Mux offers a simplified and user-friendly management console acces- sible via ethernet or RS232. It features a VT100 terminal interface for system management, T1/E1 and fiber interface configuraon. TECHNICAL SPECS Interfaces 155 Mpps STM-1 or OC-3 fiber, T1/E1, ethernet, RS-232 Connectors Includes standards based SFP transceiver module for 1310 nm single mode fiber with LC connecors, RJ-45 for T1/E1, RS-232 DB-9 Power Requirements 100/240 VAC, 50/60 Hz, 20W Operang Temperature Range Temperature range: 0–50°C Warranty 5-Year warranty with product registraon HIGHLIGHTS Cost-effecve bandwidth consolidaon Simple configuraon via ethernet or RS232 BENEFITS Rate Stability Improved Response Time Timely Provisioning Responsive Service and Repair Flexible Customer Soluons Reduce Operaonal Costs Reliability Security ORDERING INFO SKU Item STM1MUX STM-1/OC-3 to E1/T1 Mulplexer (Includes SFP transceiver, rack mounng angled brackets, 5M SMF LC duplex fiber, serial, Ethernet and AC mains cables) CABL-651 Single mode fiber, LC duplex connectors, 5M CABL-630 T1/E1 Split cable CABL-614G RJ45 E1/T1 cable 05/12 Front Back Fiber Multiplexer SMT1Mux: T1/E1 OVER STM-1/OC-3 FIBER VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

STM1Mux: T1/E1 over STM-1/OC-3 Fiber - VoIPon · PDF fileIntroducing Sangoma’s new fiber multiplexer that can rearrange an . STM-1 or OC-3 fiber signal into 63 E1 or 84 T1 framing

Embed Size (px)

Citation preview

Page 1: STM1Mux: T1/E1 over STM-1/OC-3 Fiber - VoIPon · PDF fileIntroducing Sangoma’s new fiber multiplexer that can rearrange an . STM-1 or OC-3 fiber signal into 63 E1 or 84 T1 framing

Introducing Sangoma’s new fiber multiplexer that can rearrange an STM-1 or OC-3 fiber signal into 63 E1 or 84 T1 framing. Sangoma offers this cost-effective and reliable solution, consistent with the quality and affordability of its other product families.

As demand and bandwidth needs increase in today’s telecommunications and data network, large economies of scale can be achieved by substituting multiple single T1/E1 trunks with a single fiber connection running at 155 Mbps. A STM-1 or OC-3 interface will reduce overall expenses and control costs by combining data and voice applications over one circuit. Depending on the market, the benefits can be seen as soon as you subscribe to more than 20 T1 or E1 circuits simultaneously.

The STM1Mux is a 155 Mbps fiber multiplexer that interfaces with the STM-1/OC-3 network via a standards-based SFP transceiver with single mode fiber with LC connectors. The T1/E1 connectors are RJ-48, each carrying 2 T1/E1 per connector, in a DSX pinout.

The STM1Mux offers a simplified and user-friendly management console acces-sible via ethernet or RS232. It features a VT100 terminal interface for system management, T1/E1 and fiber interface configuration.

TECHNICAL SPECS

Interfaces155 Mpps STM-1 or OC-3 fiber, T1/E1, ethernet, RS-232

ConnectorsIncludes standards based SFP transceiver module for 1310 nm single mode fiber with LC connecors, RJ-45 for T1/E1, RS-232 DB-9

Power Requirements100/240 VAC, 50/60 Hz, 20W

Operating Temperature RangeTemperature range: 0–50°C

Warranty5-Year warranty with product registration

HIGHLIGHTS

› Cost-effective bandwidth consolidation › Simple configuration via ethernet or RS232

BENEFITS

› Rate Stability › Improved Response Time › Timely Provisioning › Responsive Service and Repair › Flexible Customer Solutions › Reduce Operational Costs › Reliability › Security

ORDERING INFO

SKU Item

STM1MUXSTM-1/OC-3 to E1/T1 Multiplexer(Includes SFP transceiver, rack mounting angled brackets, 5M SMF LC duplex fiber, serial, Ethernet and AC mains cables)

CABL-651 Single mode fiber, LC duplex connectors, 5M

CABL-630 T1/E1 Split cable

CABL-614G RJ45 E1/T1 cable

05/12

Front

Back

Fiber Multiplexer

SMT1Mux: T1/E1 OVER STM-1/OC-3 FIBER

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299