0.72 hrs

2 pcs

f

0.15 mm

k

0.40 mm

h

1

7.00 g

d

MK3/S

Summary

Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white andblack.

I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert afilament change command in the G-code so I could change the color. It canbe done very easily in the PrusaSlicer.

I separated the magnet post so I could print without supports. The postneeds to be glued to the back with super glue.

The magnet used is 6.3 mm diameter by 3 mm thickness. They werepurchased from Michaels Craft Store.

3D Printers > Other Accessories

jediorder visualizer starwars rebel jedi extruder

zarehz

Star Wars JediOrder ExtruderVisualizer

VIEW IN BROWSER

updated 27. 3. 2020 | published 27. 3. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

981.3 KB

0.64 hrs f 0.15 mm k 0.40 mm h PLA 7.00 g d MK3/S

updated 27. 3. 2020

253.7 KB

0.08 hrs f 0.15 mm k 0.40 mm h PLA 0.30 g d MK3/S

updated 27. 3. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

129.6 KBupdated 27. 3. 2020

Printer brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: .15 mm

Infill: 15%

Filament_brand: Prusament

Filament_color: Vanilla White & Prusa Galaxy Black

Filament_material: PLA

Notes: Added brim for the magnet post so it would have more surface areato stick to the print bed. Also, the post prints at 100% infill.

Post-Printing Magnet Post need to be super glued to the back. Magnetneeds to be supper glued to the post.

jedi_order_emblem_v2_015mm_pla_mk3s_38m.gcode

jedi_order_stand_v2_015mm_pla_mk3s_5m.gcode

jedi_order_emblem_v2.stl

228.8 KBupdated 27. 3. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

jedi_order_stand_v2.stl