STAINLESS STEEL SOLUTIONS

201

STAINLESS STEEL SOLUTIONS


FOOD

OIL & GAS

CHEMICAL

PETRO-

CHEMICAL

IN-SHORE

MARINE

ENVIRONMENTS

OFF-SHORE

EXTREME PROTECTION FOR HARSH ENVIRONMENTS

For indoor and outdoor applications, where the main requirement is to offer a high resistance to harsh chemical and environmental factors, we propose AISI304L and AISI316L stainless steel solutions.

Stainless steel

202 STAINLESS STEEL SOLUTIONS

PLU

S Certified welding process UNI EN15614 WPAR (Welding Procedure Approval Record) and WPS (Welding Procedure Specification).

Certification of the quality management system according to ATEX standard.

Highly qualified & well trained staff.

Customisation with holes, cut-outs, special dimension & professional assistance for special projects.

Stainless steel

EN13980 ISO 15614-1 ISO 9001

203

RESEARCH

Use of new silicone seal for the new ranges of stainless steel products.

ADDED VALUE

Cabinet E NUX and boxes E COR provided with AISI316L stainless steel hinges. E NUX components: rear panel fixing brackets, side panel fixing brackets, door locking points, everything manufactured from stainless steel AISI316L.

STRENGTH

New E COR, E NUX, E MOX and E COMP front door, produced with formed corners.E NUX structure proposed with the same high-performance constructive concepts of the sheet steel version.

SUSTAINABILITY

Innovative energy-saving laser technolog y for high precision welding in order to produce our structure E NUX.

PROTECTION

Boxes E COR, cabinetsE NUX and E MOX/E COMPdoor s manufactured f r o m p r e - s a t i n i z e d s ta in less s tee l sheet (AISI304L or AISI316L) covered with PVC film for additional protection and provided with new packaging.

FUNCTIONALITY

F r o n t d o o r w i t h a r e d u c e d d i m e n s i o n of the door angle, in o rder to permi t the door opening in case of E COR boxes placed side by side. Easy assembly of E NUX suite cabinet thanks to the innovative orthogonal joint.

EASINESS

Boxes E COR supplied with a mounting plate that is provided with slots in the corner, to allow a simple installation.

DESIGN

A new locking cover for boxes E COR with a double door, a functional and eye-catching handle used for cabinets: E NUX, E MOX and E COMP.


Stainless steel

Note: available on request: single door cabinet and suite cabinets, with protection rating IP56/IP65, NEMA 4X. For more information, see page 69.

204

SUITE CABINETS SINGLE AND DOUBLE DOOR

E NUX STAINLESS STEEL SUITE CABINET

CHARACTERISTICS

The profile used for uprights and crosspieces is unique, manufactured from stainless steel AISI304L (AISI316L on request), closed with continuous welding and free of sharp edges. The bottom is a single piece with box-type structure manufactured from press-bent welded profiles (in stainless steel AISI304L (AISI316L on request), while the frame corners are manufactured with AISI316L stainless steel orthogonal joints laser welded to vertical upright rails and horizontal rails for the roof and bottom. The union of the entire structure is obtained by 8 high-strength screws and positioning pins between the two parts of the orthogonal joint. Hinges in stainless steel AISI316L.

SUPPLY• structure manufactured from stainless steel sheet AISI304L (AISI316L on request)• roof and rear panel manufactured from pre-satinized stainless steel sheet

AISI304L (AISI316L on request)• door with formed corners manufactured from pre-satinized stainless steel sheet

AISI304L (AISI316L on request) provided with a stiffening tubular frame, silicone seal and ø 3 mm double bar lever-operated locking system

• bottom manufactured from stainless steel sheet AISI304L (AISI316L on request) with modular and adjustable cable entry (double cable entry for L≥1000 mm) and gasket.

PROTECTION RATING• IP55 complying with IEC EN62208; EN60529• NEMA 12 complying with UL508A; UL50 • protection degree guaranteed by the two-component silicone foam seal• impact resistance IK10 complying with IEC EN62208; EN62202.

B-51

24.5

24.5

A

B* P

54.5

54.5

P-65

DP-114

C

B-100

F

E

B-5

N

M

L=1000

70

E E

Ø13

* With side panels mounted, add 12 mm

Note: main accessories to be ordered separately: • mounting plate EUPA, see page 207 • side panels EUFX, see page 209 • plinth EUZX, see page 210.

Note: available on request: stainless steel modular cabinet E NUX with internal doors and E NUX PC cabinet with sliding shelf.

Stainless steel

205


Note: main accessories to be ordered separately: • mounting plate EUPA, see page 207 • side panels EUFX, see page 209 • plinth EUZX, see page 210.

B-51 P-6524

.524

.5

A

B*

M M

B-5

54.5

54.5

N

P

70

C

FD

P-11

4

E E

B-100

Ø13


Note: to order a stainless steel enclosure in high grade AISI316L, add the suffix “H” to the code (i.e.:ENUX-061804PRXH).

Note: to order a stainless steel enclosure in high grade AISI316L, add the suffix “H” to the code (i.e.: ENUX-121804PRXH).

E NUX STAINLESS STEEL WITH SINGLE BLANK DOORE NUX DIMENSIONS CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE

CODE WIDTH HEIGHT DEPTH B* A P C D E F M N

ENUX-061804PRX 600 1800 400 600 1809 414 395 271 365 240 445 1630ENUX-061805PRX 600 1800 500 600 1809 514 395 371 365 340 445 1630ENUX-062005PRX 600 2000 500 600 2009 514 395 371 365 340 445 1830ENUX-062006PRX 600 2000 600 600 2009 614 395 471 365 440 445 1830ENUX-081804PRX 800 1800 400 800 1809 414 595 271 565 240 645 1630ENUX-081805PRX 800 1800 500 800 1809 514 595 371 565 340 645 1630ENUX-082005PRX 800 2000 500 800 2009 514 595 371 565 340 645 1830ENUX-082006PRX 800 2000 600 800 2009 614 595 471 565 440 645 1830ENUX-101805PRX 1000 1800 500 1000 1809 514 795 371 765 340 845 1630ENUX-101806PRX 1000 1800 600 1000 1809 614 795 471 765 440 845 1630ENUX-102005PRX 1000 2000 500 1000 2009 514 795 371 765 340 845 1830ENUX-102006PRX 1000 2000 600 1000 2009 614 795 471 765 440 845 1830

E NUX STAINLESS STEEL WITH DOUBLE BLANK DOORE NUX DIMENSIONS CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE

CODE WIDTH HEIGHT DEPTH B* A P C D E F M N

ENUX-121804PRX 1200 1800 400 1200 1809 414 995 271 447 240 445 1630ENUX-121805PRX 1200 1800 500 1200 1809 514 995 371 447 340 445 1630ENUX-122005PRX 1200 2000 500 1200 2009 514 995 371 447 340 445 1830ENUX-122006PRX 1200 2000 600 1200 2009 614 995 471 447 440 445 1830

Stainless steel

206

SUITE CABINET WITH PLEXI DOOR

CHARACTERISTICS

The profile used for uprights and crosspieces is unique, manufactured from stainless steel AISI304L (AISI316L on request), closed with continuous welding and free of sharp edges. The bottom is a single piece with box-type structure manufactured from press-bent welded profiles (in stainless steel AISI304L (AISI316L on request), while the frame corners are manufactured with AISI316L stainless steel orthogonal joints laser welded to vertical upright rails and horizontal rails for the roof and bottom. The union of the entire structure is obtained by 8 high-strength screws and positioning pins between the two parts of the orthogonal joint. Hinges in stainless steel AISI316L.

SUPPLY• structure manufactured from stainless steel sheet

AISI304L (AISI316L on request)• roof and rear panel manufactured from pre-

satinized stainless steel sheet AISI304L (AISI316L on request)

• door with formed corners manufactured from pre-satinized stainless steel sheet AISI304L (AISI316L on request) provided with a stiffening tubular frame, Plexiglas, silicone seal and ø 3 mm lever-operated double bar locking system

• bottom manufactured from stainless steel sheet AISI304L (AISI316L on request) with modular and adjustable cable entry (double cable entry for W=1000mm) and gasket.

PROTECTION RATING• IP55 complying with IEC EN62208; EN60529• NEMA 12 complying with UL508A; UL50• protect ion degree guaranteed by the two-

component silicone foam seal• impact resistance IK10 complying with IEC

EN62208; EN62202.

A

B*

92.5 92.5

105

105

Note: to order a stainless steel enclosure in high grade AISI 316L, add the suffix “H” to the code (i.e.: ENUX-061804PVXH).

E NUX STAIN. STEEL WITH PLEXI DOORE NUX CABINET DIMENSIONS

CODE B* A P

ENUX-061804PVX 600 1809 414ENUX-061805PVX 600 1809 514ENUX-062005PVX 600 2009 514ENUX-062006PVX 600 2009 614ENUX-081804PVX 800 1809 414ENUX-081805PVX 800 1809 514ENUX-082005PVX 800 2009 514ENUX-082006PVX 800 2009 614ENUX-101805PVX 1000 1809 514ENUX-101806PVX 1000 1809 614ENUX-102005PVX 1000 2009 514ENUX-102006PVX 1000 2009 614


Stainless steel

* Product AtEx: Contact the ETA commercial office for cabinet with tempered glass

*

207

COMPLEMENTARY ACCESSORIES

FRONT INSERTED MOUNTING PLATE EUPA

CHARACTERISTICSManufactured from sendzimir sheet steel:• thickness 2.5 mm for L<1000• thickness 3.0 mm for L≥1000.

MOUNTING PLATE W=600EUPA CABINET DIMENSIONS MOUNTING PLATE DIM.

CODE B* A P L H I MAX

EUPA-060180 600 1809 414 485 1680 350EUPA-060180 600 1809 514 485 1680 450EUPA-060180 600 1809 614 485 1680 550EUPA-060200 600 2009 414 485 1880 350EUPA-060200 600 2009 514 485 1880 450EUPA-060200 600 2009 614 485 1880 550










26

P

Imax

L

H

B*

A


E NUX STAINLESS STEEL COMPLEMENTARY ACCESSORIES

Stainless steel

208 E NUX STAINLESS STEEL COMPLEMENTARY ACCESSORIES

SIDE INSERTED MOUNTING PLATE EUPL

CHARACTERISTICSManufactured from 2.5 mm thick sendzimir sheet steel.

SUPPLYIncludes mounting accessories and sliding guides.

L

H

P

I**max

90

90

B*

A

28


MOUNTING PLATE W=600EUPL CABINET DIMENSIONS MOUNTING PLATE DIM.


EUPL-060180 600 1809 414 600 1685 315EUPL-060180 600 1809 514 600 1685 415EUPL-060180 600 1809 614 600 1685 515EUPL-060200 600 2009 414 600 1885 315EUPL-060200 600 2009 514 600 1885 415EUPL-060200 600 2009 614 600 1885 515










Stainless steel

209E NUX STAINLESS STEEL COMPLEMENTARY ACCESSORIES

SIDE PANELS EUFX

CHARACTERISTICSManufactured from AISI 304L stainless steel sheet (AISI 316L on request) with rounded folding.

SUPPLY• two side panels• rapid fasten couplers• mounting accessories.

Note: to order the side panels for the mounting of 180° hinges, add the suffix “C” to the code (i.e.: EUFX-040180C).

INNER DOOR EUPIX

CHARACTERISTICSManufactured from AISI304L stainless steel material (AISI 316L on request) and supplied complete with vertical uprights and horizontal rails.

SUPPLY• door complete with ø 3 mm double bar locking

system• hinges• vertical uprights and horizontal rails• mounting accessories.

84

B*

A

85

84

H

23.5

23.5

42 24

L

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: EUFX-040180H).

SIDE PANELSEUFX DIMENSIONS

CODE HEIGHT DEPTH

EUFX-040180 1800 400EUFX-050180 1800 500EUFX-060180 1800 600EUFX-050200 2000 500EUFX-060200 2000 600

Note: To order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: EUPIX-060180H).

INNER DOOREUPIX CABINET DIM. INNER DOOR

CODE B* A L H

EUPIX-060180 600 1809 467 1667EUPIX-060200 600 2009 467 1867EUPIX-080180 800 1809 667 1667EUPIX-080200 800 2009 667 1867EUPIX-100180 1000 1809 867 1667EUPIX-100200 1000 2009 867 1867


Stainless steel

MODULAR PLINTH EUZX

CHARACTERISTICSCorner pieces manufactured from AISI 304L stainless steel (AISI 316L on request), with front covers made from stainless steel. Front/side crosspieces manufactured from AISI 304L stainless steel (AISI 316L on request).

SUPPLYThe modular plinth is made up of:• corner pieces: supply

i n c l u d e s 4 p i e c e s complete with front covers and mounting hardware

• front/rear crosspieces: supply includes 2 pieces

• side crosspieces: supply includes 2 pieces.

Note: to order the item in high grade AISI316L, add the suffix “H” to the code (i.e. EUZX-T0400H).

Note: to order the plinth H=200, add the suffix D to the code (i.e. EUZX-T0400D).

210


25 25

L

14.5

14.5

P

Ø14

H

1

PLINTH EUZX

CHARACTERISTICS

Front crosspieces and side crosspieces with integrated corners manufactured from 2.0 mm thick AISI 304L stainless steel (AISI 316L on request).

SUPPLYThe plinth is made up of:• front crosspieces: supply includes 2 pieces• side crosspieces with integrated corners: supply includes 2 pieces with mounting

screws.

UNIVERSAL FRONT/SIDE CROSSPIECESEUZX DESCRIPTION CROSS. LENGTH

CODE MM

EUZX-T0400 FRONT/SIDE CROSSPIECES FOR PLINTH W=400 244EUZX-T0500 FRONT/SIDE CROSSPIECES FOR PLINTH W=500 344EUZX-T0600 FRONT/SIDE CROSSPIECES FOR PLINTH W=600 444EUZX-T0800 FRONT/SIDE CROSSPIECES FOR PLINTH W=800 644EUZX-T1000 FRONT/SIDE CROSSPIECES FOR PLINTH W=1000 844EUZX-T1200 FRONT/SIDE CROSSPIECES FOR PLINTH W=1200 1044

SIDE CROSSPIECES WITH INTEGRATED CORNERS EUZX DESCRIPTION CROSS.

CODE H. MM

EUZX-P0400 SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 100EUZX-P0500 SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=500 100EUZX-P0600 SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=600 100

FRONT CROSSPIECES E NUXEUZX DESCRIPTION

CODE

EUZX-L0600 FRONT. CROSSPIECES FOR PLINTH W=600EUZX-L0800 FRONT. CROSSPIECES FOR PLINTH W=800EUZX-L1000 FRONT. CROSSPIECES FOR PLINTH W=1000EUZX-L1200 FRONT. CROSSPIECES FOR PLINTH W=1200

UNIVERSAL CORNER PIECESEUZX DESCRIPTION

CODE

EUZX-A100 CORNER PIECES FOR PLINTH H=100EUZX-A200 CORNER PIECES FOR PLINTH H=200

DIMENSIONAL SPECIFICATIONS CABINET DIM. PLINTH DIM. CENT. DISTANCES

W D L P L1 P1

600 400 600 378 549 349600 500 600 478 549 449600 600 600 578 549 549800 400 800 378 749 349800 500 800 478 749 449800 600 800 578 749 549

1000 500 1000 478 949 4491000 600 1000 578 949 5491200 400 1200 378 1149 3491200 500 1200 478 1149 4491200 600 1200 578 1149 549

Stainless steel

Note: see dimensional specifications above.

Note: to order the plinth H=200mm, order 2 packages of front crosspieces (i.e. Plinth H=200 mm dim. 800x500: 1 x EUZX-P0500D + 2 x EUZX-L0800).

Note: to order the item in high grade AISI316L, add the suffix “H” to the code (i.e. EUZX-P0500H).

Note: to order the side cross-pieces with integrated corners H=200 mm, add the suffix “D” to the code (i.e. EUZX-P0400D).

P

100

200

1919

30 30

L

1

52

P1

L1

All the button holes can be used for floor fixing

Button holes15 x 18

211


JOINING KIT EUKU-002X

To be used to join two cabinets together. It is better to use lifting brackets WTSS-001 instead of lifting eyebolts.

CHARACTERISTICSManufactured from stainless steel AISI 316L.

SUPPLYIncludes union spacers, fixing accessories and gasket to guarantee IP protection degree.

(See page 73 for drawing).

REINFORCING BRACKETS EUKU-003

To be used to grant more rigidity to cabinets joined in a suite.

CHARACTERISTICSManufactured from 4.0 mm thick zincpassivated sheet steel.

SUPPLY Includes 4 pieces with mounting accessories.

(See page 72 for drawing).

LEVELLING FEET WTPX-005X

They can be applied on the cabinet structure or plinth. They make easier for floor cleaning and are height adjustable.

SUPPLYIncludes 4 pieces complete with pin in AISI 304L, plastic base, plate and mounting accessories.

(See page 70 for picture).

SHROUD FOR FILTER FANS

Installing a shroud over a filter fan and exhaust filter, the protection degree of the enclosure is maintained.

CHARACTERISTICSManufactured from stainless steel AISI 304L.

SUPPLYIncludes 1 piece with mounting accessories.

CONFORMITY AND APPROVAL

PROTECTION RATINGNEMA 3R with fan or filtering grid.

Note: punched panels to be ordered separately.

PLAN POCKET

Large size plan manufactured from 1.5 mm thick stainless steel sheet.

SUPPLYIncludes 1 piece complete with mounting screws.

180° CHROME HINGES EUCE-180001C

Supply includes 4 pieces (door requires machining to fit).

EYEBOLTS M12 WTGS-001X

M12 lifting eyebolts manufactured from stainless steel.Supply includes 4 pieces.


LIFTING BRACKETS WTSS-001

5 mm zincpassivated sheet steel lifting brackets.Supply includes 4 pieces.


SHROUD FOR FILTER FANSWTCVX FAN FILTER

CODE

WTCVX-005 WT300B/WT300VB/WI200B/WI200VB WT330BWTCVX-010 WT305B/WT305VB WT335BWTCVX-015 WT310B/WT310VB WT340B

PLAN POCKETWTSS DOOR

CODE WIDTH

WTSS-000600X 600WTSS-000800X 800WTSS-001000X 1000

Stainless steel

PLAN POCKETWTSS DOOR

CODE WIDTH

WTSS-000600X 600WTSS-000800X 800WTSS-001000X 1000

wing

文字方塊

WTTS-000800X 800

wing

文字方塊

WTTS-001000X 1000

wing

文字方塊

WTTS-000600X 600

212

MONOBLOC CABINET

CHARACTERISTICS

Structure manufactured from 1.5 mm thick AISI304L stainless steel sheet with removable rear panel (AISI 316L on request). Door manufactured from AISI304L stainless steel sheet with stiffening frame (AISI 316L on request). Front inserted mounting plate manufactured from 2.5 mm thick sendzimir sheet steel (for E MOX W≥1000mm, EUPA mounting plate 3 mm thick). Hinges in AISI316L stainless steel.

SUPPLY• cabinet structure with upper aesthetic profiles and

rear panel • door with formed corners complete with ø 3 mm

lever-operated double bar locking system, silicone seal and tubular stiffening frame

• modular and adjustable cable entry with sealing gasket

• front-inserted mounting plate.



EN62208; EN62202.

H

L B P

M

N

26

B-131 P/2

E

Ø 13F

C

D

B-5

24.5

24.5

B-100

A

54.5

54.5

Imax

E MOX STAINLESS STEEL MONOBLOC CABINET

Stainless steel

M. Plate

213

B

B -100

A

L P

P/2B-131

H

26

Imax

M M

N

C

D F

E

Ø 13

E

24.5

24.5

B-5

70

54.5

54.5

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: EMOX-061604PRXH).

E MOX STAINLESS STEEL WITH SINGLE BLANK DOORE MOX CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM.

CODE B A P C D E F M N L H l

EMOX-061604PRX 600 1609 414 550 310 365 220 445 1430 485 1480 350EMOX-061804PRX 600 1809 414 550 310 365 220 445 1630 485 1680 350EMOX-061805PRX 600 1809 514 550 410 365 320 445 1630 485 1680 450EMOX-062004PRX 600 2009 414 550 310 365 220 445 1830 485 1880 350EMOX-062005PRX 600 2009 514 550 410 365 320 445 1830 485 1880 450EMOX-081604PRX 800 1609 414 750 310 565 220 645 1430 685 1480 350EMOX-081804PRX 800 1809 414 750 310 565 220 645 1630 685 1680 350EMOX-081805PRX 800 1809 514 750 410 565 320 645 1630 685 1680 450EMOX-082004PRX 800 2009 414 750 310 565 220 645 1830 685 1880 350EMOX-082005PRX 800 2009 514 750 410 565 320 645 1830 685 1880 450EMOX-101804PRX 1000 1809 414 950 310 765 220 845 1630 885 1680 350EMOX-102004PRX 1000 2009 414 950 310 765 220 845 1830 885 1880 350

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: EMOX-121804PRXH).

E MOX STAINLESS STEEL WITH DOUBLE BLANK DOORE MOX CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM.

CODE B A P C D E F M N L H l

EMOX-121804PRX 1200 1809 414 995 310 447 220 445 1630 1085 1680 350EMOX-121805PRX 1200 1809 514 995 410 447 320 445 1630 1085 1680 450EMOX-122004PRX 1200 1809 414 995 310 447 220 445 1830 1085 1880 350

E MOX STAINLESS STEEL MONOBLOC CABINET

Stainless steel

M. Plate

214

COMPACT SOLUTION

CHARACTERISTICS

Structure manufactured from 1.5 mm thick AISI304L stainless steel sheet (AISI 316L on request). Door manufactured from 1.5 mm thick AISI304L stainless steel sheet (AISI316L on request). Front inserted mounting plate manufactured from 2.5 mm thick sendzimir sheet steel.

SUPPLYEnclosure complete with:• door with formed corners complete with ø 3

mm lever-operated double bar locking system, 2 stiffening sendzimir profiles and silicone seal

• adjustable cable entry • front inserted mounting plate.



EN62208; EN62202.

Note: available on request.

H

L

20

A

B

B-45

30

P

= =

2121

21 21

Ø9

M

B-5

N

C

D F

E

Ø13

24.5

24.5

E COMP STAINLESS STEEL COMPACT SOLUTION

Stainless steel

215

E COMP STAINLESS STEEL COMPACT SOLUTION

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOMP6-1240XH).

E COMP STAINLESS STEEL WITH SINGLE DOORE COMP CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNT. PLATE DIM.

CODE B A P C D E F M N L H

ECOMP6-1240X 600 1209 400 550 320 490 260 445 1030 506 1145ECOMP6-1430X 600 1409 300 550 220 490 160 445 1230 506 1345ECOMP6-1440X 600 1409 400 550 320 490 260 445 1230 506 1345ECOMP8-1240X 800 1209 400 750 320 690 260 645 1030 706 1145ECOMP8-1430X 800 1409 300 750 220 690 160 645 1230 706 1345ECOMP8-1440X 800 1409 400 750 320 690 260 645 1230 706 1345

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOMP10-1240XH).

L

H

20

30

P

21

2121

21

Ø9

= =

B

A

B-45

M M

B-5

N

24.5

24.5

C

D

Ø13

E E

F

E COMP STAINLESS STEEL WITH DOUBLE DOORE COMP CABINET DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNT. PLATE DIM.

CODE B A P C D E F M N L H

ECOMP10-1240X 1000 1209 400 950 320 390 260 345 1030 906 1145ECOMP10-1430X 1000 1409 300 950 220 390 160 345 1230 906 1345ECOMP10-1440X 1000 1409 400 950 320 390 260 345 1230 906 1345ECOMP12-1240X 1200 1209 400 1150 320 490 260 345 1030 1106 1145ECOMP12-1430X 1200 1409 300 1150 220 490 160 445 1230 1106 1345ECOMP12-1440X 1200 1409 400 1150 320 490 260 445 1230 1106 1345

Stainless steel

25 25

L

27.5

27.5

P

Ø14

H

216


E MOX/E COMP STAINLESS STEEL COMPLEMENTARY ACCESSORIES

Stainless steel

PLINTH EUZX

CHARACTERISTICSFront crosspieces and side crosspieces with integrated corners manufactured from 2.0 mm thick AISI 304L stainless steel (AISI 316L on request).

SUPPLYThe plinth is made up of:• front crosspieces: supply includes 2 pieces• side crosspieces with integrated corners: supply

includes 2 pieces with mounting screws.

Note: to order the plinth H=200mm, order 2 packages of front crosspieces (i.e. Plinth H=200 mm dim. 800 x500: 1 x EUZX-P0500MD + 2 x EUZX-L0800M).

Note: to order the item in higher grade AISI316L, add the suffix “H” to the code (i.e. EUZX-P0500MH).

SIDE CROSSPIECES WITH INTEGRATED CORNERS E MOXEUZX DESCRIPTION CROSS. HEIGHT

CODE MM

EUZX-P0400M SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 100EUZX-P0400MD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 200EUZX-P0500M SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=500 100

EUZX-P0500MD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=500 200

FRONT CROSSPIECES E MOXEUZX DESCRIPTION

CODE

EUZX-L0600M FRONT. CROSSPIECES FOR PLINTH W=600EUZX-L0800M FRONT. CROSSPIECES FOR PLINTH W=800EUZX-L1000M FRONT. CROSSPIECES FOR PLINTH W=1000EUZX-L1200M FRONT. CROSSPIECES FOR PLINTH W=1200

DIMENSIONAL SPECIFICATIONS CABINET DIMENSIONS PLINTH DIM.

WIDTH DEPTH L P

600 400 600 365600 500 600 465800 400 800 365800 500 800 465

1000 400 1000 3651000 500 1000 4651200 400 1200 3651200 500 1200 465

DIMENSIONAL SPECIFICATIONS CABINET DIMENSIONS PLINTH DIM.

WIDTH DEPTH L P

600 300 600 275600 400 600 375800 300 800 275800 400 800 375

1000 300 1000 2751000 400 1000 3751200 300 1200 2751200 400 1200 375

217E MOX/E COMP STAINLESS STEEL COMPLEMENTARY ACCESSORIES

180° HINGES EUCE-180008X

Chrome hinges for 180° opening (door requires machining to fit).

SUPPLYIncludes 3 pieces with mounting screws.

EYEBOLTS WTGS-003

Zincpassivated M12 lifting eyebolts.

SUPPLYIncludes 2 pieces with nuts and washers.

COMPATIBILITY WITH E NUX SYSTEM AND ETA ACCESSORIES:

• vertical uprights EUMI, see page 99• rails WTPR H=50 mm• microswitch WI100• further ETA accessories for the inner mounting.

WALL MOUNTING BRACKETS SDWCX-010

Manufactured from 2.5 mm thick AISI 316L stainless steel.

SUPPLYIncludes 4 pieces.

FURTHER ACCESSORIES

• vertical rails, see page 108• fast-fixing brackets WTPR-R, see page 108• sliding rails CSPP, see page 108.

Stainless steel

SIDE CROSSPIECES WITH INTEGRATED CORNERS E COMPEUZX DESCRIPTION CROSS. HEIGHT

CODE MM

EUZX-P0300P SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=300 100EUZX-P0300PD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=300 200EUZX-P0400P SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 100

EUZX-P0400PD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 200

Note: to order the plinth H=200 mm, order 2 packages of front crosspieces (i.e. Plinth H=200 mm dim. 600x400: 1 x EUZX-P0400PD + 2 x EUZX-L0600M).

Note: to order the item in higher grade AISI316L, add the suffix “H” to the code (i.e. EUZX-P0500PH).

FRONT CROSSPIECES E COMPEUZX DESCRIPTION

CODE

EUZX-L0600M FRONT. CROSSPIECES FOR PLINTH W=600EUZX-L0800M FRONT. CROSSPIECES FOR PLINTH W=800EUZX-L1000M FRONT. CROSSPIECES FOR PLINTH W=1000EUZX-L1200M FRONT. CROSSPIECES FOR PLINTH W=1200

218

CHARACTERISTICS

Enclosure and door with formed corners manufactured from 1.5 mm thick pre-satinized AISI 304L stainless steel sheet (AISI 316L on request). Flat mounting plate manufactured from 2.5 mm thick sendzimir sheet steel with slots in the corners. Hinges in stainless steel.

SUPPLYBox complete with:• mounting plate• door with locking system body in chromed zinc

alloy and lever in stainless steel with ø 3 mm double bar key, and silicone seal

• package with screws for earth connection and mounting plate.

PROTECTION RATING• IP66 complying with IEC EN62208; EN60529• NEMA 4X complying with UL508A; UL50• protect ion degree guaranteed by the two-

component silicone foam seal*• impact resistance IK10 complying with IEC

EN62208; EN62202.

* From size 600x800, box supplied with door rails already mounted.

BOXES WITH SINGLE BLANK DOOR

E COR STAINLESS STEEL BOXES

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOR2-315XH).

STAINLESS STEEL BOX WITH SINGLE BLANK DOORE COR BOX DIMENSIONS MOUNTING PLATE DIM. NO. OF LOCKS /

CODE B A P L H TYPE

ECOR2-315X 200 300 150 150 250 1ECOR3-315X 300 300 150 300 300 1ECOR3-415X 300 400 150 250 350 1ECOR3-420X 300 400 200 250 350 1ECOR4-315X 400 300 150 350 250 1ECOR4-420X 400 400 200 350 350 1ECOR4-425X 400 400 250 400 400 1ECOR4-520X 400 500 200 350 450 1ECOR4-620X 400 600 200 350 550 2ECOR4-625X 400 600 250 400 600 2ECOR5-520X 500 500 200 450 450 1ECOR5-525X 500 500 250 500 500 1ECOR5-720X 500 700 200 500 700 2ECOR5-725X 500 700 250 450 650 2ECOR6-420X 600 400 200 550 350 1ECOR6-620X 600 600 200 550 550 2ECOR6-625X 600 600 250 550 550 2ECOR6-630X 600 600 300 550 550 2ECOR6-820X 600 800 200 550 750 2ECOR6-825X 600 800 250 550 750 2ECOR6-830X 600 800 300 550 750 2

ECOR6-1230X 600 1200 300 550 1150 ROD SYSTEMECOR8-830X 800 800 300 750 750 2

ECOR8-1030X 800 1000 300 750 950 2ECOR8-1230X 800 1200 300 750 1150 ROD SYSTEM

B-5

A-5

21 21

2121

Ø9

L

H

23

P

2323

12

B

A

23 23

Stainless steel

219

BOXES WITH DOUBLE BLANK DOOR

E COR STAINLESS STEEL BOXES

CHARACTERISTICS

Enclosure and door with formed corners manufactured from 1.5 mm thick pre-satinized AISI 304L stainless steel sheet (AISI 316L on request). Flat mounting plate manufactured from 2.5 mm thick sendzimir sheet steel provided with slots in the corners. Hinges in stainless steel.

SUPPLYBox complete with:• mounting plate• door complete with ø 3 mm double bar locking

system and stainless steel lever• package with screws for earth connection and

mounting plate.



EN62208; EN62202.

B-5

A-5

L

H

2121

2121

Ø9

23

P

2323

12

B

A

23 23

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOR10-1030XH).

STAINLESS STEEL BOX WITH DOUBLE BLANK DOORE COR BOX DIMENSIONS MOUNTING PLATE DIMENSIONS

CODE B A P L H

ECOR10-1030X 1000 1000 300 950 950ECOR10-1230X 1000 1200 300 950 1150

Stainless steel

220

ENCLOSURES COMPLYING WITH ATEX DIRECTIVE

The requirements of the enclosures that are intended to be used in explosive atmosphere (ATEX) are high: the wide range of E COR - EEX boxes fully responds to both the standard required by the directive and the need of the market to have a product for increased safety.

CHARACTERISTICSStructure and door with formed corners manufactured from 1.5 mm thick pre-satinized AISI304L stainless steel sheet (AISI316L on request). Flat mounting plate manufactured from 2.5 mm thick sendzimir sheet steel, with slots in the corners. Hinges in stainless steel. External anti-rotation and anti-slip stud M6 (H=15 mm) in AISI304L stainless steel, welded on the enclosure.

SUPPLYEnclosure complete with:• mounting plate• door with locking system body in zinc alloy and

lever in stainless steel with ø 3 mm double bar key• package with screws for earth connection and

mounting plate.

PROTECTION RATING• IP66 complying with IEC EN62208; EN60529• NEMA 4X complying with UL508A; UL50• protect ion degree guaranteed by the two-


EN62208; EN62202.

CONFORMITY• Ex II 2GD• Ex e II T6• Ex td A21 T85°C.

ETA wall-mounting stainless steel boxes E COR (see page 218) are in compliance with the European Directive 94/9/CE that aims to ensure the free circulation in the EU countries for the products concerned and it is applied to the equipment and protective systems indeed to be used in potentially explosive atmosphere (ATEX), for the presence of flammable substances in the form of gases, vapours, mists or dusts. According to the reference standards EN60079-0; 7 and EN61241-0; 1, boxes E COR - EEX are “electric enclosures” classified for category II and zones 1, 2, 21, 22 for gas and dust (GD) with protection method EX-e, EX-ia. EX-e protection methods are based on the idea of prevention; to comply with that the directive establishes a high structural level and restrictive features of equipments and components, and strict periodic tests of process on the approved products UNI EN13980 and ISO 9001.

E COR STAINLESS STEEL ENCLOSURES COMPLYING WITH ATEX DIRECTIVE

Certificate:IMQ09 ATEX037U

Stainless steel

221

E COR STAINLESS STEEL ENCLOSURES COMPLYING WITH ATEX DIRECTIVE

ELECTRIC ENCLOSURESE COR - EEX BOX DIMENSIONS MOUNT. PLATE DIM. NO. OF LOCKS /

CODE B A P L H TYPE

ECOR2-315EEX 200 300 150 150 250 1ECOR3-415EEX 300 400 150 250 350 1ECOR3-420EEX 300 400 200 250 350 1ECOR4-315EEX 400 300 150 350 250 1ECOR4-420EEX 400 400 200 350 350 1ECOR4-520EEX 400 500 200 350 450 1ECOR4-620EEX 400 600 200 350 550 2ECOR5-520EEX 500 500 200 450 450 1ECOR5-725EEX 500 700 250 450 750 2ECOR6-420EEX 600 400 200 550 350 1ECOR6-620EEX 600 600 200 550 550 2ECOR6-625EEX 600 600 250 550 550 2ECOR6-630EEX 600 600 300 550 550 2ECOR6-820EEX 600 800 200 550 750 2ECOR6-825EEX 600 800 250 550 750 2ECOR6-830EEX 600 800 300 550 750 2

ECOR6-1230EEX 600 1200 300 550 1150 ROD SYSTEMECOR8-830EEX 800 800 300 750 750 2

ECOR8-1030EEX 800 1000 300 750 950 2ECOR8-1230EEX 800 1200 300 750 1150 ROD SYSTEM

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOR6-830EEXH).

WALL MOUNTING BRACKETSSDWCX-010EEX

Special brackets designed for the standard wall-mounting stainless steel boxes E COR, that are already installed on-site and that are requiring compliance with ATEX with increased and intrinsic safety.

CHARACTERISTICSManufactured from 2.5 mm thick AISI316L stainless steel sheet.

SUPPLYIncludes 4 standard brackets + 1 bracket with external and welded stud M6.

Note: item available on request.

Stainless steel

BOXES WITH PLEXI DOOR

222

CHARACTERISTICS

Enclosure manufactured from 1.5 mm thick pre-satinized AISI 304L stainless steel sheet (AISI 316L on request). Plexi door with formed corners, silicone seal and 4.0 mm thick plexiglass (fixed with a frame). Flat mounting plate manufactured from 2.5 mm thick sendzimir sheet steel with slots in the corners. Hinges in stainless steel.

SUPPLYBox complete with:• mounting plate• door with locking system body in zinc alloy and

lever in stainless steel with ø 3 mm double bar key, and silicone seal

• package with screws for earth connection and mounting plate.


component silicone foam seal.• impact resistance IK10 complying with IEC

EN62208; EN62202.

Note: product ATEX: contact the ETA commercial office for E COR boxes with tempered glass

STAINLESS STEEL BOX WITH PLEXI DOORE COR BOX DIMENSIONS DOOR SPACE MOUNTING PLATE DIM. NUMBER

CODE B A P M N L H OF LOCKS

ECOR3-420PVX 300 400 200 150 275 250 350 1ECOR4-520PVX 400 500 200 250 375 350 450 1ECOR4-620PVX 400 600 200 250 475 350 550 2ECOR5-725PVX 500 700 250 350 575 450 650 2ECOR6-820PVX 600 800 200 450 675 550 750 2ECOR6-825PVX 600 800 250 450 675 550 750 2

ECOR8-1030PVX 600 800 250 450 675 550 750 2

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ECOR4-620PVXH).

E COR STAINLESS STEEL BOXES WITH PLEXI DOOR

Stainless steel

M

B-5

NA-5

21 21

2121

Ø9

23

P

2323

12

L

H

B

A

23 23

* Product AtEx: Contact the ETA commercial office for boxes with tempered glass

*

wing

文字方塊

800 1000 300 650 875 750 950

223E COR STAINLESS STEEL COMPLEMENTARY ACCESSORIES


FUNCTIONAL FRAME ECMI

CHARACTERISTICSInternal frame for the assembly of modular panels and DIN rails. Manufactured from 1.5 mm thick stainless steel sheet AISI304L (on request AISI316L).


* For boxes with D=150 mm, the functional frame is not used

FUNCTIONAL FRAMEECMI DIMENSIONS DESCRIPTION

CODE WIDTH HEIGHT

ECMI-040060X 400 600 3 rows for 14 DIN modulesECMI-060080X 600 800 4 rows for 14 DIN modulesECMI-080100X 800 1000 5 rows for 14 DIN modules

MODULAR PANELS ECPM/ECAV

CHARACTERISTICS

Modular panels manufactured from 1.5 mm thick stainless steel sheet AISI304L (AISI 316L on request). Available in blank version or for DIN rail, they can be easily mounted on E COR boxes using the functional frame ECMI.

SUPPLYIncludes 1 piece with mounting accessories (ECPM panel including 2 brackets and DIN rail).

MODULAR PANELS FOR DIN RAILS*ECPM DIMENSIONS NO. OF

CODE WIDTH HEIGHT MODULES

ECPM-040180X 400 180 14ECPM-060180X 600 180 25ECPM-080180X 800 180 36

MODULAR BLANK PANELSECAV DIMENSIONS

CODE WIDTH HEIGHT

ECAV-040180X 400 180ECAV-060180X 600 180ECAV-060360X 600 360ECAV-080180X 800 180ECAV-080360X 800 360

DIN RAIL WITH BRACKETSECDI DIMENSIONS NO. OF

CODE WIDTH MODULES

ECDI-014040 400 14ECDI-025060 600 25ECDI-036080 800 36

Stainless steel

* DIN rails and brackets included

224 E COR STAINLESS STEEL COMPLEMENTARY ACCESSORIES

RAIN CANOPY ECTT

Particularly suitable for outdoor installations where it is required an additional protection against atmospheric agents.

CHARACTERISTICSManufactured from 1.5 mm thick AISI 304L stainless steel sheet (AISI 316L available on request).


CANOPYECTT DIMENSIONS

CODE WIDTH HEIGHT

ECTT1-04X 400 200ECTT1-05X 500 200ECTT2-05X 500 250ECTT1-06X 600 250ECTT2-08X 800 300

Stainless steel

LOCK WE001X

For food industry or special applications in harsh environments where high hygienic standards are required, a specific locking system is available.

INNER DOOR ECPO

CHARACTERISTICSManufactured from 1.5 stainless steel sheet AISI304L (on request AISI316L).

SUPPLYIncludes 1 piece with ECMI frame, hinges, closing systems and screws.

INNER DOORECPO DIMENSIONS

CODE WIDTH HEIGHT

ECPO1-34X 300 400ECPO1-45X 400 500ECPO1-46X 400 600ECPO1-57X 500 700ECPO1-68X 600 800

ECPO1-810X 800 1000

225

E COR STAINLESS STEEL COMPLEMENTARY ACCESSORIES

Stainless steel

25 25

L27

.527

.5

P

Ø14

H

PLINTH EUZX





Manufactured from 2.5 mm thick AISI316L stainless steel.

SUPPLY Includes 4 pieces.

Note: SDWCX-010EEX brackets available for compliance with ATEX (with intrinsic and increased safety).

SIDE CROSSPIECES WITH INTEGRATED CORNERS E COREUZX DESCRIPTION CROSS. HEIGHT

CODE MM

EUZX-P0300P SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=300 100EUZX-P0300PD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=300 200

DIMENSIONAL SPECIFICATIONS BOX DIMENSIONS PLINTH DIM.

L P L P

600 300 600 275800 300 800 275

1000 300 1000 275

Note: to order the plinth H=200 mm, order 2 packages of front crosspieces (i.e. Plinth H=200 mm dim. 600x300: 1 x EUZX-P0300PD + 2 x EUZX-L0600M).

Note: to order the item in higher grade AISI316L, add the suffix “H” to the code (i.e. EUZX-P0400PH).

FRONT CROSSPIECES E COREUZX DESCRIPTION

CODE

EUZX-L0600M FRONT CROSSPIECES FOR PLINTH W=600EUZX-L0800M FRONT CROSSPIECES FOR PLINTH W=800EUZX-L1000M FRONT CROSSPIECES FOR PLINTH W=1000

226

TERMINAL BOXES

E GRAN STAINLESS STEEL TERMINAL BOXES

Stainless steel

CHARACTERISTICS

Boxes and door manufactured from 1.2 mm thick AISI 304L stainless steel sheet (AISI 316L on request). Lid provided with stainless steel captive screws, silicone seal and formed corners for improved aesthetics.

PROTECTION RATING• P66 / IP69K complying with IEC EN62208; EN60529• NEMA 4X complying with UL508A; UL50• protect ion degree guaranteed by the two-

component silicone foam seal • impact resistance IK10 complying with IEC

EN62208; EN62202.

Note: to be ordered separately: mounting plate and/or DIN rails (for DIN rails see page 179).

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: EGRAN1-108XH).

STAINLESS STEEL TERMINAL BOXESE GRAN BOX DIMENSIONS

CODE B A P

EGRAN1-108X 150 150 80EGRAN2-208X 200 200 80EGRAN3-208X 300 200 80EGRAN1-112X 150 150 120EGRAN4-212X 400 200 120EGRAN3-312X 300 300 120

MOUNTING PLATE SDPA

Manufactured from 2 mm thick sendzimir sheet steel.

SUPPLYIncludes 1 piece.

MOUNTING PLATESDPA BOX DIMENSIONS B A

CODE WIDTH HEIGHT

SDPA-11 150 150 140 140SDPA-22 200 200 176 170SDPA-32 300 200 276 170SDPA-33 300 300 276 270SDPA-42 400 200 376 170

wing

文字方塊

IP66/

227

SHX STAINLESS STEEL PUSHBUTTON BOXES

SHX STAINLESS STEEL PUSHBUTTON BOXES

M6

11,5

21

21

9

C22,5

A

C

B

12,5

12,5

L

8

H

SHPA

18

P14,5

18

18 18

CHARACTERISTICS

Structure and lid manufactured from 1.2 mm thick satin AISI304L stainless steel sheet.Lid fixed in four points (placed outside the gasket) with captive screw and available in 2 versions: punched for the fixation of push buttons ø 22.5 mm or blank. Wall-mounting from the inner part of the box or from the external part with fixing brackets.

PROTECTION RATING• IP66 / IP69K complying with IEC EN62208; EN60529• NEMA 4X complying with UL508A; UL50• impact resistance IK10 complying with IEC

EN62208; EN62202.

Note: to be ordered separately: mounting plate and/or DIN profiles (for DIN profile see page 179).

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code (i.e.: SHX1-109FH).

PUSHBUTTON WITH PUNCHED LIDSHX DESCRIPTION HOLES Ø 22,5 MM

CODE B A P C N

SHX1-109F 100 100 90 - 1SHX1-169F 100 160 90 60 2SHX1-229F 100 220 90 60 3SHX1-289F 100 280 90 60 4

PUSHBUTTON WITH BLANK LIDSHX DESCRIPTION

CODE B A P

SHX1-109C 100 100 90SHX1-169C 100 160 90SHX1-229C 100 220 90SHX1-289C 100 280 90

WALL MOUNTING BRACKETS SHWCX-010

CHARACTERISTICSManufactured from 2.5 mm thick stainless steel sheet.

SUPPLYIncludes 4 pieces.

MOUNTING PLATE SHPA

CHARACTERISTICSManufactured from 2.0 mm thick sendzimir sheet steel.

SUPPLYIncludes 1 piece.

MOUNTING PLATE PUSHBUTTON MOUNT. PLATE DIMENSIONS

CODE CODE L H

SHX1-109F - - -SHX1-169F SHPA-16 60 145SHX1-229F SHPA-22 60 205SHX1-289F SHPA-28 60 265

Stainless steel

wing

文字方塊


228

STAINLESS STEEL BOXES WITH SLOPED ROOF

E COR STAINLESS STEEL BOXES WITH SLOPED ROOF

CHARACTERISTICS

Enclosure and door manufactured from 1.5 mm thick AISI 304L stainless steel sheet (AISI 316L upon request). Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Stainless steel hinges.

SUPPLYThe enclosure is supplied with:• mounting plate• door with locking system body in chromed zinc

alloy and lever in stainless steel with ø 3 mm double bar key

• set of screws for grounding and mounting plate assembling

• cable entry plate.

PROTECTION RATING• P66 / IP69K complying with IEC EN62208; EN60529• NEMA 4X complying with UL508A; UL50• impact resistance IK10 complying with IEC

EN62208; EN62202.

Note: available upon request.

B

C

20

30°

12

23

P

E 35

F

23 23

B-5

A-8

L

H

2326

A

Note: to order the item in AISI 316L, add the suffix “H” to the code (i.e.: ECOR6-825TXH).

STAINLESS STEEL BOXES WITH SLOPED ROOFE COR BOX DIMENSIONS CABLE ENTRY MOUNTING PLATE NO. OF LOCKS /

CODE B A P C E F L H TYPE

ECOR4-515TX 400 503 150 617 230 50 350 450 1ECOR4-620TX 400 603 200 745 230 100 350 550 2ECOR5-730TX 500 703 300 903 330 100 450 650 2ECOR6-825TX 600 803 250 974 530 100 550 750 2

ECOR8-1025TX 800 1003 250 1174 530 100 750 950 2ECOR8-1030TX 800 1003 300 1203 530 100 750 950 2ECOR8-1230TX 800 1203 300 1403 530 100 750 1150 ROD SYSTEM

Stainless steel

229

ZBX STAINLESS STEEL MONOBLOC CONTROL DESKS

CHARACTERISTICS

Enclosure manufactured from 1.5 mm thick AISI 304L press bent stainless steel material. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel mounted on the rear cover. Upper cover manufactured from 1.5 mm thick AISI 304L material with sendzimir profiles and mechanical stop. Adjustable cable entry. Item in AISI 316L available on request.

SUPPLY• control desk• doors complete with ø 3 mm double bar key

locking system• mounting plate• upper cover complete with locking system• adjustable cable entry.

PROTECTION RATING• IP55• NEMA 12 complying with UL508A; UL50.

ZBX STAINLESS STEEL MONOBLOC CONTROL DESKS

W=600/800 W=1000/1200 Mounting plate

STAINLESS STEEL CONTROL DESKSZBX DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE

CODE B A P C D E F M L H

ZBX6-01 600 1000 400 550 310 490 260 445 520 918ZBX8-01 800 1000 400 750 310 690 260 645 720 918ZBX0-01 1000 1000 400 950 310 410 (x2) 260 345 920 918ZBX2-01 1200 1000 400 1150 310 510 (x2) 260 445 1120 918

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code. (i.e.: ZBX6-01H).

Stainless steel

511470

Available

689

Ava

ilab

le

230

MODULAR CONTROL DESKS STAINLESS STEEL DEPTH 400

STAINLESS STEEL MODULAR CONTROL DESKS DEPTH 400

BOX AEX

CHARACTERISTICS

Enclosure manufactured from 1.5 mm thick AISI 304L press bent stainless steel sheet. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Door manufactured from 1.5 mm thick AISI 304L stainless steel sheet with lateral stiffening cover. Item in AISI 316L available on request.

SUPPLYBox includes:• door complete with ø 3 mm double bar closing

system• mounting plate• adjustable cable entry.


Note: to order the item in high grade AISI 316L, add the suffix “H” to the code (i.e.: AEX6-01H).

STAINLESS STEEL BOXAEX DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE

CODE B A P C D E F M L H I MAX

AEX6-01 600 770 400 550 310 500 270 445 530 684 358AEX8-02 800 770 400 750 310 700 270 645 730 684 358AEX1-23 1200 770 400 950 310 515 (x2) 270 445 1130 684 358AEX1-64 1600 770 400 1150 310 715 (x2) 270 645 1530 684 358

W=600/800

Available

Mounting plate

Avai

labl

e

W=1200/1600

Available

Stainless steel

231

SHELF LEX

CHARACTERISTICS

Structure manufactured from 1.5 mm thick AISI 304L press bent stainless steel sheet. Upper panel manufactured from 2.0 mm thick AISI 304L stainless steel sheet with sendzimir rails and gas springs to support lid and avoid accidental closing. Item in AISI 316L available on request.

SUPPLYShelf includes:• lid complete with ø 3 mm double bar closing

system• rails to mount supplementary mounting plate• sealing gasket• mounting accessories.

PROTECTION RATINGIP55.

Note: to order the item in high grade AISI 316L, add the suffix “H” to the code (i.e.: LEX6-01H).

UPPER PART PEX

CHARACTERISTICS

Structure manufactured from 1.5 mm thick AISI 304L press bent stainless steel sheet. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel with 2.0 mm zincpassivated rails for mounting plate adjustment. Hinged front panel manufactured from 2.0 mm AISI 304L stainless steel sheet complete with sendzimir vertical rails and mechanical stop. Item in AISI 316L available on request.

SUPPLYUpper part includes:• hinged front cover with ø 3 mm double bar locking

system• mounting plate• sealing gasket• mounting accessories.

PROTECTION RATINGIP55.

STAINLESS STEEL MODULAR CONTROL DESKS DEPTH 400

STAINLESS STEEL SHELFLEX NUMBER

CODE B OF LOCKS

LEX6-01 600 2LEX8-02 800 2LEX1-23 1200 2LEX1-64 1600 3

STAINLESS STEEL UPPER PARTPEX MOUNTING PLATE DIM.

CODE B L H I MAX

PEX6-01 600 510 370 250PEX8-02 800 710 370 250PEX1-23 1200 1110 370 250PEX1-64 1600 1510 370 250

Note: to order the item in AISI 316L, add the suffix “H” to the code (i.e.: PEX6-01H).

Stainless steel

Mounting plate

385Available

232 STAINLESS STEEL MODULAR CONTROL DESKS DEPTH 400 AND COMPLEMENTARY ACCESSORIES

SHELF MEX

CHARACTERISTICS

Structure manufactured from 1.5 mm thick AISI 304L press bent stainless steel sheet. Upper panel manufactured from 2.0 mm thick AISI 304L material with sendzimir rails and gas springs to support lid and avoid accidental closing. Item in AISI 316L available on request.

SUPPLYShelf includes:• lid complete with ø 3 mm double bar closing system• sealing gasket• mounting accessories.


Note: to order the item in AISI 316L, add the suffix “H” to the code (i.e.: MEX6-01H).

Note: to order the item in AISI 316L, add the suffix “H” to the code (i.e.: TLX6-01H).

STAINLESS STEEL SHELFMEX NUMBER

CODE B OF LOCKS

MEX6-01 600 2MEX8-02 800 2MEX1-23 1200 2MEX1-64 1600 3

STAINLESS STEEL COVERTLX

CODE B P

TLX6-01 600 398TLX8-02 800 398TLX1-23 1200 398TLX1-64 1600 398

COVER TLX

Manufactured from 1.5 mm thick AISI 304L stainless steel sheet (AISI 316L on request). To be used as top cover of the LEX shelf.

SUPPLYIncludes single piece with mounting accessories.

Stainless steel

570Available

233

STAINLESS STEEL CONTROL DESKS COMPLEMENTARY ACCESSORIES

STAINLESS STEEL MODULAR CONTROL DESKS COMPLEMENTARY ACCESSORIES

Stainless steel

25 25

L27

.527

.5

P

Ø14

H

PLINTH EUZX




SIDE CROSSPIECES WITH INTEGRATED CORNERSEUZX DESCRIPTION CROSS. HEIGHT

CODE MM

EUZX-P0400M SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 100EUZX-P0400MD SIDE CROSSPIECES WITH INTEGRATED CORNERS FOR PLINTH D=400 200

DIMENSIONAL SPECIFICATIONS CONTROL DESK DIM. PLINTH DIM.

W D L P

600 400 600 365800 400 800 365

1000 400 1000 3651200 400 1200 3651600 400 1600 365

Note: to order the plinth H=200 mm, order 2 packages of front crosspieces (i.e. Plinth H=200 mm dim. 800 x 400: 1 x EUZX-P0400MD + 2 x EUZX-L0800M).

Note: to order the item in higher grade AISI316L, add the suffix “H” to the code (i.e. EUZX-P0400MH).

FRONT CROSSPIECESEUZX DESCRIPTION

CODE

EUZX-L0600M FRONT CROSSPIECES FOR PLINTH W=600EUZX-L0800M FRONT CROSSPIECES FOR PLINTH W=800EUZX-L1000M FRONT CROSSPIECES FOR PLINTH W=1000EUZX-L1200M FRONT CROSSPIECES FOR PLINTH W=1200EUZX-L1600M FRONT CROSSPIECES FOR PLINTH W=1600

Documents

STAINLESS STEEL SOLUTIONS